Now, these *-generate.c files are only used in GDBserver for unit test.
If $development is false (in release), these *-generate.c files won't be
used at all.
gdb/gdbserver:
2017-09-05 Yao Qi <yao.qi@linaro.org>
* configure.srv: Set srv_i386_linux_regobj empty if $development
is false.
* linux-i386-ipa.c (initialize_low_tracepoint): Don't call
initialize_low_tdesc.
* linux-x86-low.c (initialize_low_arch): Wrap initialize_low_tdesc
with #if initialize_low_tdesc.
* linux-x86-tdesc-selftest.c: New file.
* linux-x86-tdesc.c: Move code to linux-x86-tdesc-selftest.c.
The code on creating i386-linux target descriptions are quite similar
between GDB and GDBserver, so this patch moves them into a shared file
arch/i386.c. I didn't name it as i386-linux.c, because I want to reuse it
to create other i386 non-linux target descriptions later.
gdb:
2017-09-05 Yao Qi <yao.qi@linaro.org>
* Makefile.in (ALL_TARGET_OBS): Add i386.o.
(SFILES): Add arch/i386.c.
(HFILES_NO_SRCDIR): Add arch/i386.h.
* arch/i386.c: New file.
* arch/i386.h: New file.
* arch/tdesc.h (allocate_target_description): Declare.
(set_tdesc_architecture): Declare.
(set_tdesc_osabi): Declare.
* configure.tgt (i[34567]86-*-linux*): Add i386.o.
* i386-linux-tdep.c: Don't include ../features/i386/32bit-XXX.c.
include arch/i386.h.
(i386_linux_read_description): Remove code and call
i386_create_target_description.
(set_tdesc_architecture): New function.
(set_tdesc_osabi): New function.
* target-descriptions.h (allocate_target_description): Remove.
gdb/gdbserver:
2017-09-05 Yao Qi <yao.qi@linaro.org>
* Makefile.in (arch-i386.o): New rule.
* configure.srv (i[34567]86-*-linux*): Add arch-i386.o.
(x86_64-*-linux*): Likewise.
* linux-x86-tdesc.c: Don't include ../features/i386/32bit-XXX.c,
include arch/i386.h.
(i386_linux_read_description): Remove code and call
i386_create_target_description.
* tdesc.c (allocate_target_description): New function.
* tdesc.h (set_tdesc_architecture): Remove declaration.
(set_tdesc_osabi): Likewise.
GDBserver still uses pre-generated target descriptions in order to
reply to GDB's query on target description (see xml-builtin-generated.c
in GDBserver build directory). This patch teaches GDBserver to
create XML contents according to the target descriptions rather than
using pre-generated ones.
First, change target feature c files to pass the feature xml file
name to tdesc_create_feature, so that target description in GDBserver
can record them, and create XML contents from these features in
buffer, like
...
<xi:include href="$FEATURE1_XML_NAME"/>
<xi:include href="$FEATURE2_XML_NAME"/>
...
and send this buffer back to GDB.
Note that this patch reuses target_desc.xmltarget a little bit, which is
to hold the XML contents dynamically generated in tdesc_get_features_xml.
However, it is not xfree'ed in ~target_desc, because we can't tell it is
from xstrdup or a literal string. Since we don't delete target_desc,
there is no memory leak yet. After we change all target descriptions to
the new style, target_desc.xmltarget is from xstrdup, then, we can safely
xfree it in ~target_desc.
gdb:
2017-09-05 Yao Qi <yao.qi@linaro.org>
* arch/tdesc.h (tdesc_create_feature): Add an argument xml.
* target-descriptions.c (tdesc_create_feature): Likewise, and
adjust code.
* features/i386/32bit-avx.c: Re-generated.
* features/i386/32bit-avx512.c: Re-generated.
* features/i386/32bit-core.c: Re-generated.
* features/i386/32bit-linux.c: Re-generated.
* features/i386/32bit-mpx.c: Re-generated.
* features/i386/32bit-pkeys.c: Re-generated.
* features/i386/32bit-sse.c: Re-generated.
gdb/gdbserver:
2017-09-05 Yao Qi <yao.qi@linaro.org>
* linux-x86-tdesc.c: Don't include <inttypes.h>.
(i386_linux_read_description) [!IN_PROCESS_AGENT]: Call
set_tdesc_architecture and set_tdesc_osabi. Remove code setting
.xmltarget.
* server.c (get_features_xml): Call tdesc_get_features_xml.
* tdesc.c (set_tdesc_architecture): New function.
(set_tdesc_osabi): New function.
(tdesc_get_features_xml): New function.
(tdesc_create_feature): Add an argument.
* tdesc.h (struct target_desc) <features>: New field.
<arch, osabi>: New field.
(~target_desc): xfree features, arch, and osabi.
(target_desc::oerator==): Don't compare .xmltarget.
[!IN_PROCESS_AGENT] (set_tdesc_architecture): Declare.
(set_tdesc_osabi): Likewise.
(tdesc_get_features_xml): Likewise.
This patch adds a unit test in GDBserver to test dynamically created
target descriptions equal these pre-generated ones.
gdb/gdbserver:
2017-09-05 Yao Qi <yao.qi@linaro.org>
* linux-x86-tdesc.c: Include selftest.h.
(i386_tdesc_test): New function.
(initialize_low_tdesc): Call selftests::register_test.
* tdesc.h: Include regdef.h.
(target_desc): Override operator == and !=.
gdb:
2017-09-05 Yao Qi <yao.qi@linaro.org>
* regformats/regdef.h (struct reg): Override operator == and !=.
tdesc_i386_XXX_linux is used in many places in linux-x86-low.c and this
patch adds a new function i386_linux_read_description to return the right
tdesc according to xcr0. i386_linux_read_description is quite similar to
the counterpart in GDB, and the following patch will share the duplicated
code, so this patch adds arch/tdesc.h includes the declarations of various
tdesc apis which are used by the shared code. The generated c feature
files can include arch/tdesc.h only.
gdb/gdbserver:
2017-09-05 Yao Qi <yao.qi@linaro.org>
* configure.srv (srv_tgtobj): Append linux-x86-tdesc.o.
(ipa_obj): Likewise.
* linux-i386-ipa.c: Include common/x86-xstate.h
(get_ipa_tdesc): Call i386_linux_read_description.
(initialize_low_tracepoint): Don't call init_registers_XXX
functions, call initialize_low_tdesc instead.
* linux-x86-low.c (x86_linux_read_description): Call
i386_linux_read_description.
(initialize_low_arch): Don't call init_registers_i386_XXX
functions, call initialize_low_tdesc.
* linux-x86-tdesc.c: New file.
* linux-x86-tdesc.h (x86_linux_tdesc): New X86_TDESC_LAST.
(i386_get_ipa_tdesc_idx): Declare.
(i386_get_ipa_tdesc): Declare.
(initialize_low_tdesc): Declare.
gdb:
2017-09-05 Yao Qi <yao.qi@linaro.org>
* arch/tdesc.h: New file.
* regformats/regdat.sh: Generate code using tdesc_create_reg.
* target-descriptions.c: Update comments.
* target-descriptions.h: Include "arch/tdesc.h". Remove the
declarations.
* features/i386/32bit-avx.c: Re-generated.
* features/i386/32bit-avx512.c: Re-generated.
* features/i386/32bit-core.c: Re-generated.
* features/i386/32bit-linux.c: Re-generated.
* features/i386/32bit-mpx.c: Re-generated.
* features/i386/32bit-pkeys.c: Re-generated.
* features/i386/32bit-sse.c: Re-generated.
Nowadays, target_desc.reg_defs is a pointer points to a pre-generated
array, which is not flexible. This patch changes it from an array
to a VEC so that GDBserver can create target descriptions dynamically
later. Instead of using pre-generated array, the -generated.c calls
VEC_safe_push to add each register to vector.
Since target_desc.reg_defs is used in IPA, we need to build common/vec.c
for IPA too.
gdb/gdbserver:
2017-09-05 Yao Qi <yao.qi@linaro.org>
* Makefile.in (IPA_OBJS): Add vec-ipa.o
* regcache.c (get_thread_regcache): Use VEC_length.
(init_register_cache): Likewise.
(regcache_cpy): Likewise.
(registers_to_string): Iterate reg_defs via VEC_iterate.
(find_regno): Likewise.
(find_register_by_number): Use VEC_index.
(register_size): Call find_register_by_number.
(register_data): Call find_register_by_number.
(supply_regblock): Use VEC_length.
(regcache_raw_read_unsigned): Likewise.
* tdesc.c (init_target_desc): Iterate reg_defs via
VEC_iterate.
(default_description): Update initializer.
(copy_target_description): Don't update field num_registers.
* tdesc.h (struct target_desc) <reg_defs>: Change it to VEC.
<num_registers>: Remove.
gdb:
2017-09-05 Yao Qi <yao.qi@linaro.org>
* regformats/regdat.sh: Update generated code.
If you "make" from scratch in gdbserver/, you'll notice that make
deletes the files it considers as intermediary at the end:
$ make clean && make
...
rm i386-mmx-linux-generated.c x32-avx-avx512-linux-generated.c ...
Then, if you type make again, make will rebuild these files and rebuild
gdbserver. To avoid this, we can add the .SECONDARY special target. If
it has no pre-requisites, all intermediary files will be kept.
gdb/gdbserver/ChangeLog:
* Makefile.in (.SECONDARY): Define target.
A quite straightforward change. It does "fix" leaks in record-btrace.c,
although since this is only used in debug printing code, it has no real
world impact.
gdb/ChangeLog:
* target/waitstatus.h (target_waitstatus_to_string): Change
return type to std::string.
* target/waitstatus.c (target_waitstatus_to_string): Return
std::string.
* target.h (target_waitstatus_to_string): Remove declaration.
* infrun.c (resume, clear_proceed_status_thread,
print_target_wait_results, do_target_wait, save_waitstatus,
stop_all_threads): Adjust.
* record-btrace.c (record_btrace_wait): Adjust.
* target-debug.h
(target_debug_print_struct_target_waitstatus_p): Adjust.
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_wait_1): Adjust.
* server.c (queue_stop_reply_callback): Adjust.
This patch implements the ability to set/unset environment variables
on the remote target, mimicking what GDB already offers to the user.
There are two features present here: user-set and user-unset
environment variables.
User-set environment variables are only the variables that are
explicitly set by the user, using the 'set environment' command. This
means that variables that were already present in the environment when
starting GDB/GDBserver are not transmitted/considered by this feature.
User-unset environment variables are variables that are explicitly
unset by the user, using the 'unset environment' command.
The idea behind this patch is to store user-set and user-unset
environment variables in two separate sets, both part of gdb_environ.
Then, when extended_remote_create_inferior is preparing to start the
inferior, it will iterate over the two sets and set/unset variables
accordingly. Three new packets are introduced:
- QEnvironmentHexEncoded, which is used to set environment variables,
and contains an hex-encoded string in the format "VAR=VALUE" (VALUE
can be empty if the user set a variable with a null value, by doing
'set environment VAR=').
- QEnvironmentUnset, which is used to unset environment variables, and
contains an hex-encoded string in the format "VAR".
- QEnvironmentReset, which is always the first packet to be
transmitted, and is used to reset the environment, i.e., discard any
changes made by the user on previous runs.
The QEnvironmentHexEncoded packet is inspired on LLDB's extensions to
the RSP. Details about it can be seen here:
<https://raw.githubusercontent.com/llvm-mirror/lldb/master/docs/lldb-gdb-remote.txt>
I decided not to implement the QEnvironment packet because it is
considered deprecated by LLDB. This packet, on LLDB, serves the same
purpose of QEnvironmentHexEncoded, but sends the information using a
plain text, non-hex-encoded string.
The other two packets are new.
This patch also includes updates to the documentation, testsuite, and
unit tests, without introducing regressions.
gdb/ChangeLog:
2017-08-31 Sergio Durigan Junior <sergiodj@redhat.com>
* NEWS (Changes since GDB 8.0): Add entry mentioning new support
for setting/unsetting environment variables on the remote target.
(New remote packets): Add entries for QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset.
* common/environ.c (gdb_environ::operator=): Extend method to
handle m_user_set_env_list and m_user_unset_env_list.
(gdb_environ::clear): Likewise.
(match_var_in_string): Change type of first parameter from 'char
*' to 'const char *'.
(gdb_environ::set): Extend method to handle
m_user_set_env_list and m_user_unset_env_list.
(gdb_environ::unset): Likewise.
(gdb_environ::clear_user_set_env): New method.
(gdb_environ::user_set_envp): Likewise.
(gdb_environ::user_unset_envp): Likewise.
* common/environ.h (gdb_environ): Handle m_user_set_env_list and
m_user_unset_env_list on move constructor/assignment.
(unset): Add new default parameter 'update_unset_list = true'.
(clear_user_set_env): New method.
(user_set_envp): Likewise.
(user_unset_envp): Likewise.
(m_user_set_env_list): New std::set.
(m_user_unset_env_list): Likewise.
* common/rsp-low.c (hex2str): New function.
(bin2hex): New overload for bin2hex function.
* common/rsp-low.c (hex2str): New prototype.
(str2hex): New overload prototype.
* remote.c: Include "environ.h". Add QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset.
(remote_protocol_features): Add QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset packets.
(send_environment_packet): New function.
(extended_remote_environment_support): Likewise.
(extended_remote_create_inferior): Call
extended_remote_environment_support.
(_initialize_remote): Add QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset packet configs.
* unittests/environ-selftests.c (gdb_selftest_env_var):
New variable.
(test_vector_initialization): New function.
(test_init_from_host_environ): Likewise.
(test_reinit_from_host_environ): Likewise.
(test_set_A_unset_B_unset_A_cannot_find_A_can_find_B):
Likewise.
(test_unset_set_empty_vector): Likewise.
(test_vector_clear): Likewise.
(test_std_move): Likewise.
(test_move_constructor):
(test_self_move): Likewise.
(test_set_unset_reset): Likewise.
(run_tests): Rewrite in terms of the functions above.
gdb/gdbserver/ChangeLog:
2017-08-31 Sergio Durigan Junior <sergiodj@redhat.com>
* server.c (handle_general_set): Handle QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset packets.
(handle_query): Inform remote that QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset are supported.
gdb/doc/ChangeLog:
2017-08-31 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.texinfo (set environment): Add @anchor. Explain that
environment variables set by the user are sent to GDBserver.
(unset environment): Likewise, but for unsetting variables.
(Connecting) <Remote Packet>: Add "environment-hex-encoded",
"QEnvironmentHexEncoded", "environment-unset", "QEnvironmentUnset",
"environment-reset" and "QEnvironmentReset" to the table.
(Remote Protocol) <QEnvironmentHexEncoded, QEnvironmentUnset,
QEnvironmentReset>: New item, explaining the packet.
gdb/testsuite/ChangeLog:
2017-08-31 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.base/share-env-with-gdbserver.c: New file.
* gdb.base/share-env-with-gdbserver.exp: Likewise.
These functions apply to thread, and not inferiors (in the gdbserver
sense, the abstraction for threads and processes, as in
inferior_list). Therefore, it would make more sense if these functions
were named with "thread" rather than "inferior".
gdb/gdbserver/ChangeLog:
* inferiors.h (inferior_target_data): Rename to ...
(thread_target_data): ... this.
(inferior_regcache_data): Rename to ...
(thread_regcache_data): ... this.
(set_inferior_regcache_data): Rename to ...
(set_thread_regcache_data): ... this.
* inferiors.c (inferior_target_data): Rename to ...
(thread_target_data): ... this.
(inferior_regcache_data): Rename to ...
(thread_regcache_data): ... this.
(set_inferior_regcache_data): Rename to ...
(set_thread_regcache_data): ... this.
(free_one_thread): Update.
* linux-low.h (get_thread_lwp): Update.
* regcache.c (get_thread_regcache): Update.
(regcache_invalidate_thread): Update.
(free_register_cache_thread): Update.
* win32-i386-low.c (update_debug_registers_callback): Update.
(win32_get_current_dr): Update.
* win32-low.c (thread_rec): Update.
(delete_thread_info): Update.
(continue_one_thread): Update.
(suspend_one_thread): Update.
The inferior (thread) target data is always set through add_thread.
gdb/gdbserver/ChangeLog:
* inferiors.c (set_inferior_target_data): Remove.
* inferiors.h (set_inferior_target_data): Remove.
This patch uses GDB self test in GDBserver. The self tests are run if
GDBserver is started with option --selftest.
gdb:
2017-08-18 Yao Qi <yao.qi@linaro.org>
* NEWS: Mention GDBserver's new option "--selftest".
* Makefile.in (SFILES): Remove selftest.c, add common/selftest.c.
* selftest.c: Move it to common/selftest.c.
* selftest.h: Move it to common/selftest.h.
* selftest-arch.c (reset): New function.
(tests_with_arch): Call reset.
gdb/gdbserver:
2017-08-18 Yao Qi <yao.qi@linaro.org>
* Makefile.in (OBS): Add selftest.o.
* configure.ac: AC_DEFINE GDB_SELF_TEST if $development.
* configure, config.in: Re-generated.
* server.c: Include common/sefltest.h.
(captured_main): Handle option --selftest.
gdb/testsuite:
2017-08-18 Yao Qi <yao.qi@linaro.org>
* gdb.server/unittest.exp: New.
gdb/doc:
2017-08-18 Yao Qi <yao.qi@linaro.org>
* gdb.texinfo (Server): Document "--selftest".
When I verify my target description changes, I build GDB and GDBserver for
x32, but it failed.
/../../binutils-gdb/gdb/gdbserver/linux-amd64-ipa.c
../../../binutils-gdb/gdb/gdbserver/linux-amd64-ipa.c: In function ‘const target_desc* get_ipa_tdesc(int)’:
../../../binutils-gdb/gdb/gdbserver/linux-amd64-ipa.c:184:10: error: ‘X86_TDESC_AVX512’ was not declared in this scope
case X86_TDESC_AVX512:
^
../../../binutils-gdb/gdb/gdbserver/linux-amd64-ipa.c:185:14: error: ‘tdesc_x32_avx512_linux’ was not declared in this scope
return tdesc_x32_avx512_linux;
^
../../../binutils-gdb/gdb/gdbserver/linux-amd64-ipa.c: In function ‘void initialize_low_tracepoint()’:
../../../binutils-gdb/gdb/gdbserver/linux-amd64-ipa.c:282:36: error: ‘init_registers_x32_avx512_linux’ was not declared in this scope
init_registers_x32_avx512_linux ();
^
ipa_x32_linux_regobj use to be there, but removed by
22049425ce by mistake.
gdb/gdbserver:
2017-08-04 Yao Qi <yao.qi@linaro.org>
* configure.srv (ipa_x32_linux_regobj): New.
* linux-amd64-ipa.c (get_ipa_tdesc): Use X86_TDESC_AVX_AVX512
instead of X86_TDESC_AVX512.
(initialize_low_tracepoint): Call
init_registers_x32_avx_avx512_linux.
I got confused by the result value of fast_tracepoint_collecting, while
it sounds like it would return true/false (whether the thread is
collecting or not), it actually returns:
0: not collecting
1: in the jump pad, before the relocated instruction
2: in the jump pad, at or after the relocated instruction
To avoid confusion, I think it would be nice to make it return an enum.
If you can help find a shorter but still relavant name, it would be
awesome. Otherwise, we'll go with that, fast_tpoint_collect_result,
which is at least consistent with the existing
fast_tpoint_collect_status.
gdb/gdbserver/ChangeLog:
* tracepoint.h (enum class fast_tpoint_collect_result): New
enumeration.
(fast_tracepoint_collecting): Change return type to
fast_tpoint_collect_result.
* tracepoint.c (fast_tracepoint_collecting): Likewise.
* linux-low.h: Include tracepoint.h.
(struct lwp_info) <collecting_fast_tracepoint>: Change type to
fast_tpoint_collect_result.
* linux-low.c (handle_tracepoints): Adjust.
(linux_fast_tracepoint_collecting): Change return type to
fast_tpoint_collect_result.
(maybe_move_out_of_jump_pad, linux_wait_for_event_filtered,
linux_wait_1, stuck_in_jump_pad_callback,
lwp_signal_can_be_delivered, linux_resume_one_lwp_throw,
proceed_one_lwp): Adjust to type change.
struct target_desc is used by both GDBserver and IPA, but fields
expedite_regs and xmltarget are only used in GDBserver, so this patch wraps
these two fields by ifndef IN_PROCESS_AGENT. This patch also changes
regformats/regdat.sh to generate .c files in this way too.
gdb/gdbserver:
2017-06-29 Yao Qi <yao.qi@linaro.org>
* tdesc.h (struct target_desc) [IN_PROCESS_AGENT] <expedite_regs>:
Remove.
[IN_PROCESS_AGENT] <xmltarget>: Likewise.
gdb:
2017-06-29 Yao Qi <yao.qi@linaro.org>
* regformats/regdat.sh: Generate code with
"ifndef IN_PROCESS_AGENT".
As part of the preparation necessary for my upcoming task, I'd like to
propose that we turn gdb_environ into a class. The approach taken
here is simple: the class gdb_environ contains everything that is
needed to manipulate the environment variables. These variables are
stored in an std::vector<char *>, which can be converted to a 'char
**' and passed as argument to functions that need it.
The usage has not changed much. As per Pedro's suggestion, this class
uses a static factory method initialization. This means that when an
instance is created, it is initially empty. When needed, it has to be
initialized using the static method 'from_host_environ'.
As mentioned before, this is a preparation for an upcoming work that I
will be posting in the next few weeks or so. For that work, I'll
probably create another data structure that will contain all the
environment variables that were set by the user using the 'set
environment' command, because I'll need access to them. This will be
much easier with the class-ification of gdb_environ.
As noted, this has been regression-tested with the new version of
environ.exp and no regressions were found.
gdb/ChangeLog:
2017-06-20 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
'unittests/environ-selftests.c'.
(SUBDIR_UNITTESTS_OBS): Add 'environ-selftests.o'.
* charset.c (find_charset_names): Declare object 'iconv_env'.
Update code to use 'iconv_env' object. Remove call to
'free_environ'.
* common/environ.c: Include <utility>.
(make_environ): Delete function.
(free_environ): Delete function.
(gdb_environ::clear): New function.
(gdb_environ::operator=): New function.
(gdb_environ::get): Likewise.
(environ_vector): Delete function.
(set_in_environ): Delete function.
(gdb_environ::set): New function.
(unset_in_environ): Delete function.
(gdb_environ::unset): New function.
(gdb_environ::envp): Likewise.
* common/environ.h: Include <vector>.
(struct gdb_environ): Delete; transform into...
(class gdb_environ): ... this class.
(free_environ): Delete prototype.
(init_environ, get_in_environ, set_in_environ, unset_in_environ,
environ_vector): Likewise.
* infcmd.c (run_command_1): Update code to call
'envp' from 'gdb_environ' class.
(environment_info): Update code to call methods from 'gdb_environ'
class.
(unset_environment_command): Likewise.
(path_info): Likewise.
(path_command): Likewise.
* inferior.c (inferior::~inferior): Delete call to 'free_environ'.
(inferior::inferior): Initialize 'environment' using the host's
information.
* inferior.h: Remove forward declaration of 'struct gdb_environ'.
Include "environ.h".
(class inferior) <environment>: Change type from 'struct
gdb_environ' to 'gdb_environ'.
* mi/mi-cmd-env.c (mi_cmd_env_path): Update code to call
methods from 'gdb_environ' class.
* solib.c (solib_find_1): Likewise
* unittests/environ-selftests.c: New file.
gdb/gdbserver/ChangeLog:
2017-06-20 Sergio Durigan Junior <sergiodj@redhat.com>
* linux-low.c (linux_create_inferior): Adjust code to access the
environment information via 'gdb_environ' class.
* lynx-low.c (lynx_create_inferior): Likewise.
* server.c (our_environ): Make it an instance of 'gdb_environ'.
(get_environ): Return a pointer to 'our_environ'.
(captured_main): Initialize 'our_environ'.
* server.h (get_environ): Adjust prototype.
* spu-low.c (spu_create_inferior): Adjust code to access the
environment information via 'gdb_environ' class.
AFAIK, the register keyword is not relevant today, and clang complains
about it:
/home/emaisin/src/binutils-gdb/gdb/gdbserver/linux-low.c:5873:3: error: 'register' storage class specifier is deprecated and incompatible with C++1z
[-Werror,-Wdeprecated-register]
register PTRACE_XFER_TYPE *buffer;
^~~~~~~~~
I think we can safely remove it.
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_read_memory, linux_write_memory): Remove
usage of "register" keyword.
clang complains that for some types, we use both the class and struct
keywords in different places. It's not really a problem, so I think we
can safely turn this warning off.
gdb/ChangeLog:
* configure: Re-generate.
* warning.m4 (build_warnings): Add -Wno-mismatched-tags.
gdb/gdbserver/ChangeLog:
* configure: Re-generate.
In warning.m4, we pass all the warning flags one by one to the compiler
to test if they are supported by this particular compiler. If the
compiler exits with an error, we conclude that this warning flag is not
supported and exclude it. This allows us to use warning flags without
having to worry about which versions of which compilers support each
flag.
clang, by default, only emits a warning if an unknown flag is passed:
warning: unknown warning option '-Wfoo' [-Wunknown-warning-option]
The result is that we think that all the warning flags we use are
supported by clang (they are not), and the compilation fails later when
building with -Werror, since the aforementioned warning becomes an
error. The fix is to also pass -Werror when probing for supported
flags, then we'll correctly get an error when using an unknown warning,
and we'll exclude it:
error: unknown warning option '-Wfoo' [-Werror,-Wunknown-warning-option]
I am not sure why there is a change in a random comment in
gdbserver/configure, but I suppose it's a leftfover from a previous
patch, so I included it.
gdb/ChangeLog:
* configure: Re-generate.
* warning.m4: Pass -Werror to compiler when checking for
supported warning flags.
gdb/gdbserver/ChangeLog:
* configure: Re-generate.
Because we are compiling .c files containing C++ code, clang++ complains
with:
clang: error: treating 'c' input as 'c++' when in C++ mode, this behavior is deprecated
If renaming all the source files to .cpp is out of the question, an
alternative is to pass "-x c++" to convince the compiler that we are
really compiling C++. It works fine with GCC too.
gdb/ChangeLog:
* Makefile.in (COMPILE.pre): Add "-x c++".
gdb/gdbserver/ChangeLog:
* Makefile.in (COMPILE.pre): Add "-x c++".
Hi,
This is another obvious patch that fixes a thinko from my previous
startup-with-shell series. We should conditionally include <signal.h>
on gdb/gdbserver/fork-child.c because gdbserver will be putting the
inferior's terminal on the correct mode after the call to
fork_inferior, and for that it needs to ignore SIGTTOU.
This patch fixes a bunch of regressions happening on AArch64 that were
reported by Yao.
gdb/gdbserver/ChangeLog:
2017-06-09 Sergio Durigan Junior <sergiodj@redhat.com>
* fork-child.c: Conditionally include <signal.h>.
This patch implements the proper support for the "startup-with-shell"
feature on gdbserver. A new packet is added, QStartupWithShell, and
it is sent on initialization. If the host sends a
"QStartupWithShell:1", it means the inferior shall be started using a
shell. If the host sends a "QStartupWithShell:0", it means the
inferior shall be started without using a shell. Any other value is
considered an error.
There is no way to remotely set the shell that will be used by the
target to start the inferior. In order to do that, the user must
start gdbserver while providing a shell via the $SHELL environment
variable. The same is true for the host side.
The "set startup-with-shell" setting from the host side is used to
decide whether to start the remote inferior using a shell. This same
setting is also used to decide whether to use a shell to start the
host inferior; this means that it is not really possible to start the
inferior using different mechanisms on target and host.
A documentation patch is included, along with a new testcase for the
feature.
gdb/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
* NEWS (Changes since GDB 8.0): Announce that GDBserver is now
able to start inferiors using a shell.
(New remote packets): Announce new packet "QStartupWithShell".
* remote.c: Add PACKET_QStartupWithShell.
(extended_remote_create_inferior): Handle new
PACKET_QStartupWithShell.
(remote_protocol_features) <QStartupWithShell>: New entry for
PACKET_QStartupWithShell.
(_initialize_remote): Call "add_packet_config_cmd" for
QStartupShell.
gdb/gdbserver/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
* server.c (handle_general_set): Handle new packet
"QStartupWithShell".
(handle_query): Add "QStartupWithShell" to the list of supported
packets.
(gdbserver_usage): Add help text explaining the
new "--startup-with-shell" and "--no-startup-with-shell" CLI
options.
(captured_main): Recognize and act upon the presence of the new
CLI options.
gdb/testsuite/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.base/startup-with-shell.c: New file.
* gdb.base/startup-with-shell.exp: Likewise.
gdb/doc/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.texinfo (Starting) <startup-with-shell>: Add @anchor.
(Connecting) <Remote Packet>: Add "startup-with-shell"
and "QStartupWithShell" to the table.
(Remote Protocol) <QStartupWithShell>: New item, explaining the
packet.
This is the most important (and the biggest, sorry) patch of the
series. It moves fork_inferior from gdb/fork-child.c to
nat/fork-inferior.c and makes all the necessary adjustments to both
GDB and gdbserver to make sure everything works OK.
There is no "most important change" with this patch; all changes are
made in a progressive way, making sure that gdbserver had the
necessary features while not breaking GDB at the same time.
I decided to go ahead and implement a partial support for starting the
inferior with a shell on gdbserver, although the full feature comes in
the next patch. The user won't have the option to disable the
startup-with-shell, and also won't be able to change which shell
gdbserver will use (other than setting the $SHELL environment
variable, that is).
Everything is working as expected, and no regressions were present
during the tests.
gdb/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
Pedro Alves <palves@redhat.com>
* Makefile.in (HFILES_NO_SRCDIR): Add "common/common-inferior.h"
and "nat/fork-inferior.h".
* common/common-inferior.h: New file, with contents from
"gdb/inferior.h".
* commom/common-utils.c: Include "common-utils.h".
(stringify_argv): New function.
* common/common-utils.h (stringify_argv): New prototype.
* configure.nat: Add "fork-inferior.o" as a dependency for
"*linux*", "fbsd*" and "nbsd*" hosts.
* corefile.c (get_exec_file): Update comment.
* darwin-nat.c (darwin_ptrace_him): Call "gdb_startup_inferior"
instead of "startup_inferior".
(darwin_create_inferior): Call "add_thread_silent" after
"fork_inferior".
* fork-child.c: Cleanup unnecessary includes.
(SHELL_FILE): Move to "common/common-fork-child.c".
(environ): Likewise.
(exec_wrapper): Initialize.
(get_exec_wrapper): New function.
(breakup_args): Move to "common/common-fork-child.c"; rename to
"breakup_args_for_exec".
(escape_bang_in_quoted_argument): Move to
"common/common-fork-child.c".
(saved_ui): New variable.
(prefork_hook): New function.
(postfork_hook): Likewise.
(postfork_child_hook): Likewise.
(gdb_startup_inferior): Likewise.
(fork_inferior): Move to "common/common-fork-child.c". Update
function to support gdbserver.
(startup_inferior): Likewise.
* gdbcore.h (get_exec_file): Remove declaration.
* gnu-nat.c (gnu_create_inferior): Call "gdb_startup_inferior"
instead of "startup_inferior". Call "add_thread_silent" after
"fork_inferior".
* inf-ptrace.c: Include "nat/fork-inferior.h" and "utils.h".
(inf_ptrace_create_inferior): Call "gdb_startup_inferior"
instead of "startup_inferior". Call "add_thread_silent" after
"fork_inferior".
* inferior.h: Include "common-inferior.h".
(trace_start_error): Move to "common/common-utils.h".
(trace_start_error_with_name): Likewise.
(fork_inferior): Move prototype to "nat/fork-inferior.h".
(startup_inferior): Likewise.
(gdb_startup_inferior): New prototype.
* nat/fork-inferior.c: New file, with contents from "fork-child.c".
* nat/fork-inferior.h: New file.
* procfs.c (procfs_init_inferior): Call "gdb_startup_inferior"
instead of "startup_inferior". Call "add_thread_silent" after
"fork_inferior".
* target.h (target_terminal_init): Move prototype to
"target/target.h".
(target_terminal_inferior): Likewise.
(target_terminal_ours): Likewise.
* target/target.h (target_terminal_init): New prototype, moved
from "target.h".
(target_terminal_inferior): Likewise.
(target_terminal_ours): Likewise.
* utils.c (gdb_flush_out_err): New function.
gdb/gdbserver/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
Pedro Alves <palves@redhat.com>
* Makefile.in (SFILES): Add "nat/fork-inferior.o".
* configure: Regenerate.
* configure.srv (srv_linux_obj): Add "fork-child.o" and
"fork-inferior.o".
(i[34567]86-*-lynxos*): Likewise.
(spu*-*-*): Likewise.
* fork-child.c: New file.
* linux-low.c: Include "common-inferior.h", "nat/fork-inferior.h"
and "environ.h".
(linux_ptrace_fun): New function.
(linux_create_inferior): Adjust function prototype to reflect
change on "target.h". Adjust function code to use
"fork_inferior".
(linux_request_interrupt): Delete "signal_pid".
* lynx-low.c: Include "common-inferior.h" and "nat/fork-inferior.h".
(lynx_ptrace_fun): New function.
(lynx_create_inferior): Adjust function prototype to reflect
change on "target.h". Adjust function code to use
"fork_inferior".
* nto-low.c (nto_create_inferior): Adjust function prototype and
code to reflect change on "target.h". Update comments.
* server.c: Include "common-inferior.h", "nat/fork-inferior.h",
"common-terminal.h" and "environ.h".
(terminal_fd): Moved to fork-child.c.
(old_foreground_pgrp): Likewise.
(restore_old_foreground_pgrp): Likewise.
(last_status): Make it global.
(last_ptid): Likewise.
(our_environ): New variable.
(startup_with_shell): Likewise.
(program_name): Likewise.
(program_argv): Rename to...
(program_args): ...this.
(wrapper_argv): New variable.
(start_inferior): Delete function.
(get_exec_wrapper): New function.
(get_exec_file): Likewise.
(get_environ): Likewise.
(prefork_hook): Likewise.
(post_fork_inferior): Likewise.
(postfork_hook): Likewise.
(postfork_child_hook): Likewise.
(handle_v_run): Update code to deal with arguments coming from the
remote host. Update calls from "start_inferior" to
"create_inferior".
(captured_main): Likewise. Initialize environment variable. Call
"have_job_control".
* server.h (post_fork_inferior): New prototype.
(get_environ): Likewise.
(last_status): Declare.
(last_ptid): Likewise.
(signal_pid): Likewise.
* spu-low.c: Include "common-inferior.h" and "nat/fork-inferior.h".
(spu_ptrace_fun): New function.
(spu_create_inferior): Adjust function prototype to reflect change
on "target.h". Adjust function code to use "fork_inferior".
* target.c (target_terminal_init): New function.
(target_terminal_inferior): Likewise.
(target_terminal_ours): Likewise.
* target.h: Include <vector>.
(struct target_ops) <create_inferior>: Update prototype.
(create_inferior): Update macro.
* utils.c (gdb_flush_out_err): New function.
* win32-low.c (win32_create_inferior): Adjust function prototype
and code to reflect change on "target.h".
gdb/testsuite/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.server/non-existing-program.exp: Update regex in order to
reflect the fact that gdbserver is now using fork_inferior (with a
shell) to startup the inferior.
GDB and gdbserver now share 'switch_to_thread' because of
fork_inferior. To make things clear, I created a new file name
common/common-gdbthread.h, and left the implementation specific to
each part.
gdb/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (HFILES_NO_SRCDIR): Add "common/common-gdbthread.h".
* common/common-gdbthread.h: New file, with parts from
"gdb/gdbthread.h".
* gdbthread.h: Include "common-gdbthread.h".
(switch_to_thread): Moved to "common/common-gdbthread.h".
gdb/gdbserver/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
* inferiors.c (switch_to_thread): New function.
This commit moves a few bits responsible for dealing with inferior job
control from GDB to common/, which makes them available to gdbserver.
This is necessary for the upcoming patches that will share
fork_inferior et al between GDB and gdbserver.
We move some parts of gdb/terminal.h to gdb/common/common-terminal.h,
especifically the code that checks terminal features and that are used
to set job_control accordingly.
After sharing parts of gdb/terminal.h, we also to share the two
functions on gdb/inflow.c that are going to be needed by the
fork_inferior rework. They are 'gdb_setpgid' and the new
'have_job_control'. I've also taken the opportunity to give a more
meaningful name to "inflow.c" on common/. Now it is called
"job-control.c" (thanks Pedro for the suggestion).
gdb/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILES): Add "common/job-control.c".
(HFILES_NO_SRCDIR): Add "common/job-control.h".
(COMMON_OBS): Add "job-control.o".
* common/job-control.c: New file, with contents from
"gdb/inflow.c".
* common/job-control.h: New file, with contents from "terminal.h".
* fork-child.c: Include "job-control.h".
* inflow.c: Include "job-control.h".
(gdb_setpgid): Move to "common/common-inflow.c".
(_initialize_inflow): Move setting of "job_control" to
"handle_job_control".
* terminal.h (job_control): Moved to "common/common-terminal.h".
(gdb_setpgid): Likewise.
* top.c: Include "job_control.h".
* utils.c: Likewise.
(job_control): Moved to "job-control.c".
gdb/gdbserver/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILE): Add "common/job-control.c".
(OBS): Add "job-control.o".
Due to my ongoing work to make it possible for gdbserver to start the
inferior using the shell, I had to share the fork_inferior function
under the "nat/" directory. In order to do that, I created a new file
and put the function there; however, this meant that I now had to
update some of the *.mh files (under "gdb/config") and add the new
file as a dependency to be built natively. Bleh...
After talking a bit to Pedro about this, the idea came up to write a
new "gdb/configure.nat" file, a la "gdb/configure.tgt", which would
concentrate all of the native settings for each host/system. I
decided to tackle this issue.
The patch is simple. All of the previous Makefile variables that were
being declared inside the *.mh files are now inside "gdb/Makefile.in",
and "gdb/configure" is responsible for AC_SUBST'ing them. The
definitions of these variables were put inside "gdb/configure.nat", so
now they're shell variables. For excerpts of Makefile code, one must
create a file under "gdb/config/${gdb_cpu_host}" and reference it on
the "nat_extra_makefile_frag" variable.
It should now be easier to update the native dependencies of hosts in
this single file.
This has been tested on x86_64 without regressions.
gdb/ChangeLog:
2017-05-06 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in: Remove "@host_makefile_frag@". Add variables
NAT_FILE, NATDEPFILES, NAT_CDEPS, LOADLIBES, MH_CFLAGS, XM_CLIBS,
NAT_GENERATED_FILES, HAVE_NATIVE_GCORE_HOST. Add
"@nat_extra_makefile_frag@".
(Makefile): Remove dependency on "@frags@".
($(GNULIB_BUILDDIR)/Makefile): Likewise.
(data-directory/Makefile): Likewise.
* config/aarch64/linux.mh: Deleted; moved contents to
"gdb/configure.nat".
* config/alpha/alpha-linux.mh: Likewise.
* config/alpha/nbsd.mh: Likewise.
* config/arm/linux.mh: Likewise.
* config/arm/nbsdelf.mh: Likewise.
* config/i386/cygwin.mh: Likewise.
* config/i386/cygwin64.mh: Likewise.
* config/i386/darwin.mh: Likewise.
* config/i386/fbsd.mh: Likewise.
* config/i386/fbsd64.mh: Likewise.
* config/i386/go32.mh: Likewise.
* config/i386/i386gnu.mh: Likewise.
* config/i386/i386sol2.mh: Likewise.
* config/i386/linux.mh: Likewise.
* config/i386/linux64.mh: Likewise.
* config/i386/mingw.mh: Likewise.
* config/i386/mingw64.mh: Likewise.
* config/i386/nbsd64.mh: Likewise.
* config/i386/nbsdelf.mh: Likewise.
* config/i386/nto.mh: Likewise.
* config/i386/obsd.mh: Likewise.
* config/i386/obsd64.mh: Likewise.
* config/i386/sol2-64.mh: Likewise.
* config/ia64/linux.mh: Likewise.
* config/m32r/linux.mh: Likewise.
* config/m68k/linux.mh: Likewise.
* config/m68k/nbsdelf.mh: Likewise.
* config/m68k/obsd.mh: Likewise.
* config/m88k/obsd.mh: Likewise.
* config/mips/fbsd.mh: Likewise.
* config/mips/linux.mh: Likewise.
* config/mips/nbsd.mh: Likewise.
* config/mips/obsd64.mh: Likewise.
* config/pa/linux.mh: Likewise.
* config/pa/nbsd.mh: Likewise.
* config/pa/obsd.mh: Likewise.
* config/powerpc/aix.mh: Likewise.
* config/powerpc/fbsd.mh: Likewise.
* config/powerpc/linux.mh: Likewise.
* config/powerpc/nbsd.mh: Likewise.
* config/powerpc/obsd.mh: Likewise.
* config/powerpc/ppc64-linux.mh: Likewise.
* config/powerpc/spu-linux.mh: Likewise.
* config/s390/linux.mh: Likewise.
* config/sh/nbsd.mh: Likewise.
* config/sparc/fbsd.mh: Likewise.
* config/sparc/linux.mh: Likewise.
* config/sparc/linux64.mh: Likewise.
* config/sparc/nbsd64.mh: Likewise.
* config/sparc/nbsdelf.mh: Likewise.
* config/sparc/obsd64.mh: Likewise.
* config/sparc/sol2.mh: Likewise.
* config/tilegx/linux.mh: Likewise.
* config/vax/nbsdelf.mh: Likewise.
* config/vax/obsd.mh: Likewise.
* config/xtensa/linux.mh: Likewise.
* config/i386/i386gnu.mn: New file, with excerpts from
"config/i386/i386gnu.mh".
* configure: Regenerate.
* configure.ac: Rewrite code to use "gdb/configure.nat" instead of
*.mh files under "gdb/config".
* configure.nat: New file, with contents from the
"gdb/config/*/*.mh" files.
gdb/doc/ChangeLog:
2017-05-06 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile: Remove "@host_makefile_frag@".
Newer GCCs are triggering false-positive -Wmaybe-uninitialized
warnings around code that uses gdb::optional:
https://sourceware.org/ml/gdb-patches/2017-05/msg00118.html
Using std::optional wouldn't help, it triggers the same warnings:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=80635
Initializing the variables to quiet the warning would defeat the
purpose of gdb::optional. Making the optional ctor memset its storage
would be a pessimization. Wrapping gdb::optional's internals with
"#pragma GCC diagnostic push/ignored/pop" doesn't work, we'd have to
wrap uses of gdb::optional instead, which I think would get unwieldy
and ugly as we start using gdb::optional more and more.
The -Wmaybe-uninitialized warning is documented as producing false
positives (unlike -Wuninialized), so until we find a better
workaround, disable -Werror for this warning. You'll still see the
warning when building gdb, but it won't cause a build failure.
Tested by building with gcc 4.8.5, 5.3.1, and gcc trunk (20170428).
gdb/ChangeLog:
2017-05-05 Pedro Alves <palves@redhat.com>
* warning.m4 (build_warnings): Add -Wno-error=maybe-uninitialized.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2017-05-05 Pedro Alves <palves@redhat.com>
* configure: Regenerate.
On commit be628ab814, both
common/common.m4 was modified in order to check for the presence of
'termios.h', 'termio.h' and 'sgtty.h'. However, I forgot to
regenerate both gdb/configure and gdb/gdbserver/configure. This
commit does that.
gdb/ChangeLog:
2017-05-03 Sergio Durigan Junior <sergiodj@redhat.com>
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2017-05-03 Sergio Durigan Junior <sergiodj@redhat.com>
* configure: Regenerate.
As requested, I'm sending this as a separate patch because it is ready
to be included as-is.
The idea here is that both gdb/terminal.h and gdb/gdbserver/terminal.h
share the same code, which is responsible for setting a bunch of
defines on based on the presence of termios.h and a few other headers.
This simple patch just moves this common code to common/gdb_termios.h
and makes the necessary adjustments on both GDB and gdbserver so that
they can use this new header. It also implements the some header
checks on common/common.m4.
As a bonus, gdb/gdbserver/terminal.h can be removed because it's now
empty.
Built on x86_64, no regressions found.
gdb/ChangeLog:
2017-04-12 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (HFILES_NO_SRCDIR): Add "common/gdb_termios.h".
* common/common.m4: Check headers 'termios.h', 'termio.h' and
'sgtty.h'.
* common/gdb_termios.h: New file, with parts of "terminal.h".
* inflow.c: Include "gdb_termios.h".
* ser-unix.c: Include "gdb_termios.h".
* terminal.h: Move terminal-related defines to
"common/gdb_termios.h".
gdb/gdbserver/ChangeLog:
2017-04-12 Sergio Durigan Junior <sergiodj@redhat.com>
* remote-utils.c: Include "gdb_termios.h" instead of
"terminal.h".
* terminal.h: Delete file.
As a preparation for the next patch, which will move fork_inferior
from GDB to common/ (and therefore share it with gdbserver), it is
interesting to convert a few functions to C++.
This patch touches functions related to parsing command-line arguments
to the inferior (see gdb/fork-child.c:breakup_args), the way the
arguments are stored on fork_inferior (using std::vector instead of
char **), and the code responsible for dealing with argv also on
gdbserver.
I've taken this opportunity and decided to constify a few arguments to
fork_inferior/create_inferior as well, in order to make the code
cleaner. And now, on gdbserver, we're using xstrdup everywhere and
aren't checking for memory allocation failures anymore, as requested
by Pedro:
<https://sourceware.org/ml/gdb-patches/2017-03/msg00191.html>
Message-Id: <025ebdb9-90d9-d54a-c055-57ed2406b812@redhat.com>
Pedro Alves wrote:
> On the "== NULL" check: IIUC, the old NULL check was there to
> handle strdup returning NULL due to out-of-memory.
> See NULL checks and comments further above in this function.
> Now that you're using a std::vector, that doesn't work or make
> sense any longer, since if push_back fails to allocate space for
> its internal buffer (with operator new), our operator new replacement
> (common/new-op.c) calls malloc_failure, which aborts gdbserver.
>
> Not sure it makes sense to handle out-of-memory specially in
> the gdb/rsp-facing functions nowadays (maybe git blame/log/patch
> submission for that code shows some guidelines). Maybe (or, probably)
> it's OK to stop caring about it, but then we should consistently remove
> left over code, by using xstrdup instead and remove the NULL checks.
IMO this refactoring was very good to increase the readability of the
code as well, because some parts of the argument handling were
unnecessarily confusing before.
gdb/ChangeLog:
2017-04-12 Sergio Durigan Junior <sergiodj@redhat.com>
* common/common-utils.c (free_vector_argv): New function.
* common/common-utils.h: Include <vector>.
(free_vector_argv): New prototype.
* darwin-nat.c (darwin_create_inferior): Rewrite function
prototype in order to constify "exec_file" and accept a
"std::string" for "allargs".
* fork-child.c: Include <vector>.
(breakup_args): Rewrite function, using C++.
(fork_inferior): Rewrite function header, constify "exec_file_arg"
and accept "std::string" for "allargs". Update the code to
calculate "argv" based on "allargs". Update calls to "exec_fun"
and "execvp".
* gnu-nat.c (gnu_create_inferior): Rewrite function prototype in
order to constify "exec_file" and accept a "std::string" for
"allargs".
* go32-nat.c (go32_create_inferior): Likewise.
* inf-ptrace.c (inf_ptrace_create_inferior): Likewise.
* infcmd.c (run_command_1): Constify "exec_file". Use
"std::string" for inferior arguments.
* inferior.h (fork_inferior): Update prototype.
* linux-nat.c (linux_nat_create_inferior): Rewrite function
prototype in order to constify "exec_file" and accept a
"std::string" for "allargs".
* nto-procfs.c (procfs_create_inferior): Likewise.
* procfs.c (procfs_create_inferior): Likewise.
* remote-sim.c (gdbsim_create_inferior): Likewise.
* remote.c (extended_remote_run): Update code to accept
"std::string" as argument.
(extended_remote_create_inferior): Rewrite function prototype in
order to constify "exec_file" and accept a "std::string" for
"allargs".
* rs6000-nat.c (super_create_inferior): Likewise.
(rs6000_create_inferior): Likewise.
* target.h (struct target_ops) <to_create_inferior>: Likewise.
* windows-nat.c (windows_create_inferior): Likewise.
gdb/gdbserver/ChangeLog:
2017-04-12 Sergio Durigan Junior <sergiodj@redhat.com>
* server.c: Include <vector>.
<program_argv, wrapper_argv>: Convert to std::vector.
(start_inferior): Rewrite function to use C++.
(handle_v_run): Likewise. Update code that calculates the argv
based on the vRun packet; use C++.
(captured_main): Likewise.
I grew a bit tired of using ptid_get_{lwp,pid,tid} and friends, so I decided to
make it a bit easier to use by making it a proper class. The fields are now
private, so it's not possible to change a ptid_t field by mistake.
The new methods of ptid_t map to existing functions/practice like this:
ptid_t (pid, lwp, tid) -> ptid_build (pid, lwp, tid)
ptid_t (pid) -> pid_to_ptid (pid)
ptid.is_pid () -> ptid_is_pid (ptid)
ptid == other -> ptid_equal (ptid, other)
ptid != other -> !ptid_equal (ptid, other)
ptid.pid () -> ptid_get_pid (ptid)
ptid.lwp_p () -> ptid_lwp_p (ptid)
ptid.lwp () -> ptid_get_lwp (ptid)
ptid.tid_p () -> ptid_tid_p (ptid)
ptid.tid () -> ptid_get_tid (ptid)
ptid.matches (filter) -> ptid_match (ptid, filter)
I've replaced the implementation of the existing functions with calls to
the new methods. People are encouraged to gradually switch to using the
ptid_t methods instead of the functions (or we can change them all in
one pass eventually).
Also, I'm not sure if it's worth it (because of ptid_t's relatively
small size), but I have made the functions and methods take ptid_t
arguments by const reference instead of by value.
gdb/ChangeLog:
* common/ptid.h (struct ptid): Change to...
(class ptid_t): ... this.
<ptid_t>: New constructors.
<pid, lwp_p, lwp, tid_p, tid, is_pid, operator==, operator!=,
matches>: New methods.
<make_null, make_minus_one>: New static methods.
<pid>: Rename to...
<m_pid>: ...this.
<lwp>: Rename to...
<m_lwp>: ...this.
<tid>: Rename to...
<m_tid>: ...this.
(ptid_build, ptid_get_pid, ptid_get_lwp, ptid_get_tid, ptid_equal,
ptid_is_pid, ptid_lwp_p, ptid_tid_p, ptid_match): Take ptid arguments
as references, move comment to class ptid_t.
* common/ptid.c (null_ptid, minus_one_ptid): Initialize with
ptid_t static methods.
(ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_tid,
ptid_equal, ptid_is_pid, ptid_lwp_p, ptid_tid_p, ptid_match):
Take ptid arguments as references, implement using ptid_t methods.
* unittests/ptid-selftests.c: New file.
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
unittests/ptid-selftests.c.
(SUBDIR_UNITTESTS_OBS): Add unittests/ptid-selftests.o.
gdb/gdbserver/ChangeLog:
* server.c (handle_v_cont): Initialize thread_resume::thread
with null_ptid.
AFAIK GDB is now free from -Wwrite-strings warnings. A few warnings may
be left behind in some host-specific code, but those should be few and
easy to fix.
gdb/ChangeLog:
2017-04-05 Pedro Alves <palves@redhat.com>
* warning.m4 (build_warnings): Remove -Wno-write-strings.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2017-04-05 Pedro Alves <palves@redhat.com>
* configure: Regenerate.
src/gdb/gdbserver/win32-low.c:1499:39: error: ISO C++ forbids converting a string constant to 'char*' [-Werror=write-strings]
ourstatus->value.execd_pathname = "Main executable";
^
This reporting via TARGET_WAITKIND_EXECD it's totally unnecessary.
get_child_debug_event returns a TARGET_WAITKIND_SPURIOUS by default,
which works just as well here, and is what the equivalent code in
gdb/windows-nat.c does too.
gdb/gdbserver/ChangeLog:
2017-04-05 Pedro Alves <palves@redhat.com>
* win32-low.c (get_child_debug_event)
<CREATE_PROCESS_DEBUG_EVENT>: Don't report TARGET_WAITKIND_EXECD.
Report TARGET_WAITKIND_SPURIOUS instead.
-Wwrite-strings flags this assignment as requiring a cast:
port = STDIO_CONNECTION_NAME;
because 'port' is a "char *", and STDIO_CONNECTION_NAME is a string
literal.
gdb/gdbserver/ChangeLog:
2017-04-05 Pedro Alves <palves@redhat.com>
* remote-utils.c (remote_prepare, remote_open): Constify.
* remote-utils.h (remote_prepare, remote_open): Constify.
* server.c (captured_main): Constify 'port' handling.
In some situations, the dependency tracking files in .deps can refer to
source files that were removed or renamed, leading to errors like:
make: *** No rule to make target `version.c', needed by `version.o'. Stop.
This patch makes the clean target clear the .deps directory, which gives
the user a chance to recover from the error wihtout knowing about the
internals of the build system.
It is already done for GDB. See here for more details:
https://sourceware.org/ml/gdb-patches/2009-03/msg00000.html
gdb/gdbserver/ChangeLog:
* Makefile.in (clean): Clear .deps.
I noticed that there were some missing files in gdbserver's gitignore
(some generated register format .c files). Of course the easy fix would
be to add those files to .gitignore, but I think we can do a better job,
so that we don't have to worry about adding generated files to
.gitignore or the clean Makefile target.
I suggest naming all generated source files -generated.c. This way, we
can use a single rule in .gitignore and do a "rm -f *-generated.c" to
clean them up.
New in v2:
- Don't rename version.o and xml-builtin.o
gdb/gdbserver/ChangeLog:
* .gitignore: Remove generated files, replace with wildcard.
* (clean): Replace removal of generated files with wildcard.
(version.c): Replace with...
(version-generated.c): ...this.
(xml-builtin.c): Replace with...
(xml-builtin-generated.c): ...this.
(%-ipa.o: %-generated.c, %.o: %-generated.c): New rules.
(%.c: *regformats*): Replace with...
(%-generated.c: *regformats*): ...this.
Provide aceess to the THREADPTR register to remote gdb.
gdb/gdbserver/
2017-03-27 Max Filippov <jcmvbkbc@gmail.com>
* linux-xtensa-low.c (regnum::R_THREADPTR): New enum member.
(xtensa_fill_gregset): Call collect_register_by_name for
threadptr register.
(xtensa_store_gregset): Call supply_register_by_name for
threadptr register.
Correctly handle a0- registers on requests from remote gdb. This fixes
'Register 1 is not available'
and subsequent assertion in the remote gdb connecting to the gdbserver:
'findvar.c:291: internal-error: value_of_register_lazy:
Assertion `frame_id_p(get_frame_id (frame))' failed.'
The register structure is the same for windowed and call0 ABIs because
currently linux kernel internally requires windowed registers, so they
are always present.
gdb/gdbserver/
2017-03-27 Max Filippov <jcmvbkbc@gmail.com>
* linux-xtensa-low.c (xtensa_fill_gregset): Call collect_register
for all registers in a0_regnum..a0_regnum + C0_NREGS range.
(xtensa_store_gregset): Call supply_register for all registers in
a0_regnum..a0_regnum + C0_NREGS range.
We will need access to the environment functions when we share
fork_inferior between GDB and gdbserver, therefore we simply make the
API on gdb/environ.[ch] available on common/. No extra adjustments
are needed to make it compile on gdbserver.
gdb/ChangeLog:
2017-03-07 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILES): Replace "environ.c" with
"common/environ.c".
(HFILES_NO_SRCDIR): Likewise, for "environ.h".
* environ.c: Include "common-defs.h" instead of "defs.h. Moved
to...
* common/environ.c: ... here.
* environ.h: Moved to...
* common/environ.h: ... here.
gdb/gdbserver/ChangeLog:
2017-03-07 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILES): Add "common/environ.c".
(OBJS): Add "common/environ.h".
The size of the state-component bitmap as specified in
Intel(R) 64 and IA-32 Architectures Software Developer's Manual,
Chapter 13.4.2 is 8 bytes.
So far, the data types used for xstate_bv_p (gdb_byte*),
clear_bv (unsigned int) and tdep->xcr0 (uint64_t) were
inconsistent. But, since the xstate components were still
fitting into a single byte, the code still worked
as expected.
However, with the addition of the PKU feature (bit 9),
using one byte for the bitmap will no longer be sufficient.
This patch changes related code to use 64 bit data types
consistently and changes read/write acces of the XSAVE
header in the xsave buffer to use the endianess-aware
functions extract_unsigned_integer and store_unsigned_integer.
This is required to make sure that eventual differences
in endianess between host and target are taken care off.
gdb/Changelog:
2016-04-18 Michael Sturm <michael.sturm@intel.com>
* i387-tdep.c (i387_supply_xsave): Change type
of clear_bv to ULONGEST. Replace gdb_byte *xstate_bv_p
with ULONGEST xstate_bv and use extract_unsigned_integer
and store_unsigned_integer to read/write its value from
the xsave buffer.
(i387_collect_xsave): Replace gdb_byte *xstate_bv_p
with ULONGEST initial_xstate_bv and use
extract_unsigned_integer/store_unsigned_integer to
read/write its value from the xsave buffer.
Change type of clear_bv to ULONGEST.
gdbserver/Changelog:
2016-04-18 Michael Sturm <michael.sturm@intel.com>
* i387-fp.c (i387_cache_to_xsave): Change type of clear_bv to
unsigned long long.
(i387_fxsave_to_cache): Likewise.
Change-Id: I0de254158960b4f7bcbc9fe2fb857034fa1f7ca5
Signed-off-by: Michael Sturm <michael.sturm@intel.com>
This patch allows examination of the registers FS_BASE and GS_BASE
for Linux Systems running on 64bit. Tests for simple read and write
of the new registers is also added with this patch.
2017-01-27 Walfred Tedeschi <walfred.tedeschi@intel.com>
Richard Henderson <rth@redhat.com>
gdb/ChangeLog:
* amd64-linux-nat.c (PTRACE_ARCH_PRCTL): New define.
(amd64_linux_fetch_inferior_registers): Add case to fetch FS_BASE
GS_BASE for older kernels.
(amd64_linux_store_inferior_registers): Add case to store FS_BASE
GS_BASE for older kernels.
* amd64-linux-tdep.c (amd64_linux_gregset_reg_offset): Add FS_BASE
and GS_BASE to the offset table.
(amd64_linux_register_reggroup_p): Add FS_BASE and GS_BASE to the
system register group.
* amd64-nat.c (amd64_native_gregset_reg_offset): Implements case
for older kernels.
* amd64-tdep.c (amd64_init_abi): Add segment registers for the
amd64 ABI.
* amd64-tdep.h (amd64_regnum): Add AMD64_FSBASE_REGNUM and
AMD64_GSBASE_REGNUM.
(AMD64_NUM_REGS): Set to AMD64_GSBASE_REGNUM + 1.
* features/Makefile (amd64-linux.dat, amd64-avx-linux.dat)
(amd64-mpx-linux.dat, amd64-avx512-linux.dat, x32-linux.dat)
(x32-avx-linux.dat, x32-avx512-linux.dat): Add
i386/64bit-segments.xml in those rules.
* features/i386/64bit-segments.xml: New file.
* features/i386/amd64-avx-mpx-linux.xml: Add 64bit-segments.xml.
* features/i386/amd64-avx-linux.xml: Add 64bit-segments.xml.
* features/i386/amd64-avx512-linux.xml: Add 64bit-segments.xml.
* features/i386/amd64-mpx-linux.xml: Add 64bit-segments.xml.
* features/i386/x32-avx512-linux.xml: Add 64bit-segments.xml.
* features/i386/x32-avx-linux.xml: Add 64bit-segments.xml.
* features/i386/amd64-linux.xml: Add 64bit-segments.xml.
* features/i386/amd64-avx-linux.c: Regenerated.
* features/i386/amd64-avx-mpx-linux.c: Regenerated.
* features/i386/amd64-avx-mpx.c: Regenerated.
* features/i386/amd64-avx512-linux.c: Regenerated.
* features/i386/amd64-linux.c: Regenerated.
* features/i386/amd64-mpx-linux.c: Regenerated.
* features/i386/i386-avx-mpx-linux.c: Regenerated.
* features/i386/i386-avx-mpx.c: Regenerated.
* features/i386/x32-avx-linux.c: Regenerated.
* features/i386/x32-avx512-linux.c: Regenerated.
* regformats/i386/amd64-avx-linux.dat: Regenerated.
* regformats/i386/amd64-avx-mpx-linux.dat: Regenerated.
* regformats/i386/amd64-avx512-linux.dat: Regenerated.
* regformats/i386/amd64-linux.dat: Regenerated.
* regformats/i386/amd64-mpx-linux.dat: Regenerated.
* regformats/i386/x32-avx-linux.dat: Regenerated.
* regformats/i386/x32-avx512-linux.dat: Regenerated.
* regformats/i386/x32-linux.dat: Regenerated.
gdb/doc/ChangeLog:
* gdb.texinfo (i386 Features): Add system segment registers
as feature.
gdb/gdbserver/ChangeLog:
* linux-x86-low.c (x86_64_regmap): Add fs_base and gs_base
to the register table.
(x86_fill_gregset): Add support for old kernels for the
fs_base and gs_base system registers.
(x86_store_gregset): Likewise.
* configure.srv (srv_i386_64bit_xmlfiles): Add 64bit-segments.xml.
gdb/testsuite/ChangeLog:
* gdb.arch/amd64-gs_base.c: New file.
* gdb.arch/amd64-gs_base.exp: New file.
Change-Id: I2e0eeb93058a2320d4d3b045082643cfe4aff963
Signed-off-by: Walfred Tedeschi <walfred.tedeschi@intel.com>
The macros mentioned in the title were set only for GDB. In gdbserver they
were not set until now. To align the code in GDB and gdbserver these macros
are also added into gdbserver, enabling read and write of gs_base and fs_base
registers from the system in new and old kernels.
2017-01-27 Walfred Tedeschi <walfred.tedeschi@intel.com>
gdb/gdbserver/ChangeLog:
* configure.ac: Check if the fs_base and gs_base members of
`struct user_regs_struct' exist.
* config.in: Regenerated.
* configure: Likewise.
Before this patch, some functions would read the inferior memory with
(*the_target)->read_memory, which returns the raw memory, rather than the
shadowed memory.
This is wrong since these functions do not expect to read a breakpoint
instruction and can lead to invalid behavior.
Use of raw memory in get_next_pcs_read_memory_unsigned_integer for example
could lead to get_next_pc returning an invalid pc.
Here's how this would happen:
In non-stop:
the user issues:
thread 1
step&
thread 2
step&
thread 3
step&
In a similar way as non-stop-fair-events.exp (threads are looping).
GDBServer:
linux_resume is called
GDBServer has pending events,
threads are not resumed and single-step breakpoint for thread 1 not installed.
linux_wait_1 is called with a pending event on thread 2 at pc A
GDBServer handles the event and calls proceed_all_lwps
This calls proceed_one_lwp and installs single-step breakpoints on all
the threads that need one.
Now since thread 1 needs to install a single-step breakpoint and is at pc B
(different than thread 2), a step-over is not initiated and get_next_pc
is called to figure out the next instruction from pc B.
However it may just be that thread 3 as a single step breakpoint at pc
B. And thus get_next_pc fails.
This situation is tested with non-stop-fair-events.exp.
In other words, single-step breakpoints are installed in proceed_one_lwp
for each thread. GDBserver proceeds two threads for resume_step, as
requested by GDB, and the thread proceeded later may see the single-step
breakpoints installed for the thread proceeded just now.
Tested on gdbserver-native/-m{thumb,arm} no regressions.
gdb/gdbserver/ChangeLog:
* linux-aarch32-low.c (arm_breakpoint_kind_from_pc): Use
target_read_memory.
* linux-arm-low.c (get_next_pcs_read_memory_unsigned_integer): Likewise.
(get_next_pcs_syscall_next_pc): Likewise.
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
Since we don't use suffix rules nor implicit rules in gdb, we can
disable them. The advantage is a slightly faster make [1].
Here are some numbers about the speedup. I ran this on my trusty old
Intel Q6600, so the time numbers are probably higher than what you'd get
on any recent hardware. I ran "make" in the gdb/ directory of an
already built repository (configured with --enable-targets=all). I
recorded the time of execution (average of 5). I then ran "make -d" and
recorded the number of printed lines, which gives a rough idea of the
number of operations done.
I compared the following configurations, to see the impact of both the
empty .SUFFIXES target and the empty pattern rules, as well as running
"make -r", which can be considered the "ideal" case.
A - baseline
B - baseline + .SUFFIXES
C - baseline + pattern rules
D - baseline + .SUFFIXES + pattern rules
E - baseline + make -r
config | time (s) | "make -d"
-----------------------------
A | 5.74 | 2396643
B | 1.19 | 298469
C | 2.81 | 1266573
D | 1.13 | 245489
E | 1.01 | 163914
We can see that the empty .SUFFIXES target has a bigger impact than the
empty pattern rules, but still it doesn't hurt to disable the implicit
pattern rules as well.
There are still some mentions of implicit rules I can't get rid of in
the "make -d" output. For example, it's trying to build .c files from
.w files:
Looking for an implicit rule for '/home/simark/src/binutils-gdb/gdb/infrun.c'.
Trying pattern rule with stem 'infrun'.
Trying implicit prerequisite '/home/simark/src/binutils-gdb/gdb/infrun.w'.
and trying to build Makefile.in from a bunch of extensions:
Looking for an implicit rule for 'Makefile.in'.
Trying pattern rule with stem 'Makefile.in'.
Trying implicit prerequisite 'Makefile.in.o'.
Trying pattern rule with stem 'Makefile.in'.
Trying implicit prerequisite 'Makefile.in.c'.
Trying pattern rule with stem 'Makefile.in'.
Trying implicit prerequisite 'Makefile.in.cc'.
... many more ...
If somebody knows how to disable them, we can do it, but at this point
the returns are minimal, so it is not that important.
I verified that both in-tree and out-of-tree builds work.
[1] Switching from explicit rules to pattern rules for files in
subdirectories actually made it slower, so this is kind of a way to
redeem myself. But it the end it's faster than it was previously,
so it was all worth it. :)
gdb/ChangeLog:
* disable-implicit-rules.mk: New file.
* Makefile.in: Include disable-implicit-rules.mk.
* data-directory/Makefile.in: Likewise.
* gnulib/Makefile.in: Likewise.
gdb/doc/ChangeLog:
* Makefile.in: Likewise.
gdb/gdbserver/ChangeLog:
* Makefile.in: Include disable-implicit-rules.mk.
gdb/testsuite/ChangeLog:
* Makefile.in: Include disable-implicit-rules.mk.
This patch fixes a few problems with GDB's time handling.
#1 - It avoids problems with gnulib's C++ namespace support
On MinGW, the struct timeval that should be passed to gnulib's
gettimeofday replacement is incompatible with libiberty's
timeval_sub/timeval_add. That's because gnulib also replaces "struct
timeval" with its own definition, while libiberty expects the
system's.
E.g., in code like this:
gettimeofday (&prompt_ended, NULL);
timeval_sub (&prompt_delta, &prompt_ended, &prompt_started);
timeval_add (&prompt_for_continue_wait_time,
&prompt_for_continue_wait_time, &prompt_delta);
That's currently handled in gdb by not using gnulib's gettimeofday at
all (see common/gdb_sys_time.h), but that #undef hack won't work with
if/when we enable gnulib's C++ namespace support, because that mode
adds compile time warnings for uses of ::gettimeofday, which are hard
errors with -Werror.
#2 - But there's an elephant in the room: gettimeofday is not monotonic...
We're using it to:
a) check how long functions take, for performance analysis
b) compute when in the future to fire events in the event-loop
c) print debug timestamps
But that's exactly what gettimeofday is NOT meant for. Straight from
the man page:
~~~
The time returned by gettimeofday() is affected by
discontinuous jumps in the system time (e.g., if the system
administrator manually changes the system time). If you need a
monotonically increasing clock, see clock_gettime(2).
~~~
std::chrono (part of the C++11 standard library) has a monotonic clock
exactly for such purposes (std::chrono::steady_clock). This commit
switches to use that instead of gettimeofday, fixing all the issues
mentioned above.
gdb/ChangeLog:
2016-11-23 Pedro Alves <palves@redhat.com>
* Makefile.in (SFILES): Add common/run-time-clock.c.
(HFILES_NO_SRCDIR): Add common/run-time-clock.h.
(COMMON_OBS): Add run-time-clock.o.
* common/run-time-clock.c, common/run-time-clock.h: New files.
* defs.h (struct timeval, print_transfer_performance): Delete
declarations.
* event-loop.c (struct gdb_timer) <when>: Now a
std::chrono::steady_clock::time_point.
(create_timer): use std::chrono::steady_clock instead of
gettimeofday. Use new instead of malloc.
(delete_timer): Use delete instead of xfree.
(duration_cast_timeval): New.
(update_wait_timeout): Use std::chrono::steady_clock instead of
gettimeofday.
* maint.c: Include <chrono> instead of "gdb_sys_time.h", <time.h>
and "timeval-utils.h".
(scoped_command_stats::~scoped_command_stats)
(scoped_command_stats::scoped_command_stats): Use
std::chrono::steady_clock instead of gettimeofday. Use
user_cpu_time_clock instead of get_run_time.
* maint.h: Include "run-time-clock.h" and <chrono>.
(scoped_command_stats): <m_start_cpu_time>: Now a
user_cpu_time_clock::time_point.
<m_start_wall_time>: Now a std::chrono::steady_clock::time_point.
* mi/mi-main.c: Include "run-time-clock.h" and <chrono> instead of
"gdb_sys_time.h" and <sys/resource.h>.
(rusage): Delete.
(mi_execute_command): Use new instead of XNEW.
(mi_load_progress): Use std::chrono::steady_clock instead of
gettimeofday.
(timestamp): Rewrite in terms of std::chrono::steady_clock,
user_cpu_time_clock and system_cpu_time_clock.
(timeval_diff): Delete.
(print_diff): Adjust to use std::chrono::steady_clock,
user_cpu_time_clock and system_cpu_time_clock.
* mi/mi-parse.h: Include "run-time-clock.h" and <chrono> instead
of "gdb_sys_time.h".
(struct mi_timestamp): Change fields types to
std::chrono::steady_clock::time_point, user_cpu_time_clock::time
and system_cpu_time_clock::time_point, instead of struct timeval.
* symfile.c: Include <chrono> instead of <time.h> and
"gdb_sys_time.h".
(struct time_range): New.
(generic_load): Use std::chrono::steady_clock instead of
gettimeofday.
(print_transfer_performance): Replace timeval parameters with a
std::chrono::steady_clock::duration parameter. Adjust.
* utils.c: Include <chrono> instead of "timeval-utils.h",
"gdb_sys_time.h", and <time.h>.
(prompt_for_continue_wait_time): Now a
std::chrono::steady_clock::duration.
(defaulted_query, prompt_for_continue): Use
std::chrono::steady_clock instead of
gettimeofday/timeval_sub/timeval_add.
(reset_prompt_for_continue_wait_time): Use
std::chrono::steady_clock::duration instead of struct timeval.
(get_prompt_for_continue_wait_time): Return a
std::chrono::steady_clock::duration instead of struct timeval.
(vfprintf_unfiltered): Use std::chrono::steady_clock instead of
gettimeofday. Use std::string. Use '.' instead of ':'.
* utils.h: Include <chrono>.
(get_prompt_for_continue_wait_time): Return a
std::chrono::steady_clock::duration instead of struct timeval.
gdb/gdbserver/ChangeLog:
2016-11-23 Pedro Alves <palves@redhat.com>
* debug.c: Include <chrono> instead of "gdb_sys_time.h".
(debug_vprintf): Use std::chrono::steady_clock instead of
gettimeofday. Use '.' instead of ':'.
* tracepoint.c: Include <chrono> instead of "gdb_sys_time.h".
(get_timestamp): Use std::chrono::steady_clock instead of
gettimeofday.
Mostly some whitespace changes to make things a bit more consistent.
gdb/ChangeLog:
* Makefile.in: Fix whitespace formatting.
gdb/gdbserver/ChangeLog:
* Makefile.in: Fix whitespace formatting.
I find the big file lists in the Makefiles a bit ugly and not very
practical. Since there are multiple filenames on each line (as much as
fits in 80 columns), it's not easy to add, remove or change a name in
the middle. As a result, we have a mix of long and short lines in no
particular order (ALL_TARGET_OBS is a good example).
I therefore suggest flattening the lists (one name per line) and keeping
them in alphabetical order. The diffs will be much clearer and merge
conflicts will be easier to resolve.
A nice (IMO) side-effect I observed is that the files are compiled
alphabetically by make, so it gives a rough idea of the progress of the
build.
I added a comment in gdb/Makefile.in to mention to keep the file lists
ordered, and gave the general guidelines on what order to respect. I
added a comment in other Makefiles which refers to gdb/Makefile.in, to
avoid duplication.
Running the patch through the buildbot found that gdb.base/default.exp
started to fail. The languages in the error message shown when typing
"set language" have changed order. We could probably improve gdb so
that it prints them in a stable order, regardless of the order of the
object list passed to the linked, but just fixing the test is easier for
now.
New in v2:
- Change ordering style, directories go at the end.
- Cleanup gdbserver's and data-directory's Makefile as well.
- Add comments at top of Makefiles about the ordering.
- Remove wrong trailing backslahes.
- Fix test gdb.base/default.exp.
gdb/ChangeLog:
* Makefile.in: Add comment about file lists ordering.
(SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_MI_OBS, SUBDIR_MI_SRCS,
SUBDIR_TUI_OBS, SUBDIR_TUI_SRCS, SUBDIR_GCC_COMPILE_OBS,
SUBDIR_GCC_COMPILE_SRCS, SUBDIR_GUILE_OBS, SUBDIR_GUILE_SRCS,
SUBDIR_PYTHON_OBS, SUBDIR_PYTHON_SRCS, SUBDIR_GDBTK_OBS,
SUBDIR_GDBTK_SRCS, XMLFILES, REMOTE_OBS, ALL_64_TARGET_OBS,
ALL_TARGET_OBS, SFILES, HFILES_NO_SRCDIR, HFILES_WITH_SRCDIR,
COMMON_OBS, YYFILES, YYOBJ, generated_files, ALLDEPFILES):
Flatten list and order alphabetically.
* data-directory/Makefile.in: Add comment about file lists
ordering.
(GEN_SYSCALLS_FILES, PYTHON_FILE_LIST): Flatten list and order
alphabetically.
gdb/gdbserver/ChangeLog:
* Makefile.in (SFILES, OBS): Flatten list and order
alphabetically.
gdb/testsuite/ChangeLog:
* gdb.base/default.exp: Fix output of "set language".
As mentioned here [1], suffix rules are obsolete and have been
superseeded with pattern rules. People (myself included, before writing
this patch) are more likely to know what pattern rules are than suffix
rules.
AFAIK, .SUFFIXES targets are only used for those rules, and can be
removed as well.
New in v2:
- Replace rule in gdbserver/Makefile.in as well.
[1] https://www.gnu.org/software/make/manual/html_node/Suffix-Rules.html
gdb/ChangeLog:
* Makefile.in (.c.o): Replace rule with ...
(%.o: %.c): ... this one.
(.po.gmo): Replace rule with ...
(%.gmo: %.po): ... this one.
(.po.pox): Replace rule with ...
(%.pox: %.po): ... this one.
(.y.c): Replace rule with ...
(%.c: %.y): ... this one.
(.l.c): Replace rule with ...
(%.c: %.l): ... this one.
(.SUFFIXES): Remove all instances.
gdb/gdbserver/ChangeLog:
* Makefile.in (.c.o): Replace rule with ...
(%.o: %.c): ... this one.
Since GNU make is now required to build GDB, we can remove everything
that checks whether the current make implemention is the GNU one or
not. I simply removed the @GMAKE_TRUE@ prefixes and removed the whole
lines that were prefixed with @GMAKE_FALSE@.
I removed the code in the configure scripts that set those variables.
I also removed the following bits from the configure scripts:
AC_CHECK_PROGS(MAKE, make): GNU make already defines a MAKE variable
internally to be used when invoking Makefiles recursively. I don't see
this variable being used anywhere else (in scripts for example), so I
think it's safe for removal.
AC_PROG_MAKE_SET: This macro defines a SET_MAKE output variable, which
is meant to be used in Makefiles to define the MAKE variable when
using an implementation of make that doesn't already define it.
Since we are now requiring GNU make, we don't need it anymore.
Plus, I don't see SET_MAKE being used anywhere, so I don't think it
was actually doing anything...
gdb/ChangeLog:
* Makefile.in: Remove @GMAKE_TRUE@ prefixes and removes lines
prefixed with @GMAKE_FALSE@. Update comment related to non-GNU
make.
* configure.ac: Remove checks for the make program.
* configure: Re-generate.
gdb/gdbserver/ChangeLog:
* Makefile.in: Remove @GMAKE_TRUE@ prefixes and removes lines
prefixed with @GMAKE_FALSE@. Update comment related to non-GNU
make.
* configure.ac: Remove checks for the make program.
* configure: Re-generate.
gdb/testsuite/ChangeLog:
* Makefile.in: Remove @GMAKE_TRUE@ prefixes and removes lines
prefixed with @GMAKE_FALSE@. Update comment related to non-GNU
make.
* configure.ac: Remove checks for the make program.
* configure: Re-generate.
Use AX_CXX_COMPILE_STDCXX to detect if the compiler supports C++11,
and if -std=xxx switches are necessary to enable C++11.
We need to tweak AX_CXX_COMPILE_STDCXX a bit though. Pristine
upstream AX_CXX_COMPILE_STDCXX appends -std=gnu++11 to CXX directly.
That doesn't work for us, because the top level Makefile passes CXX
down to subdirs, and that overrides whatever gdb/Makefile may set CXX
to. The result would be that a make invocation from the build/gdb/
directory would use "g++ -std=gnu++11" as expected, while a make
invocation at the top level would not.
So instead of having AX_CXX_COMPILE_STDCXX set CXX directly, tweak it
to AC_SUBST a separate variable -- CXX_DIALECT -- and use '$(CXX)
(CXX_DIALECT)' to compile/link.
Confirmed that this enables C++11 starting with gcc 4.8, the first gcc
release with full C++11 support.
Also confirmed that configure errors out gracefully with older GCC
releases:
checking whether /opt/gcc-4.7/bin/g++ supports C++11 features by default... no
checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -std=gnu++11... no
checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -std=gnu++0x... no
checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -std=c++11... no
checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -std=c++0x... no
checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with +std=c++11... no
checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -h std=c++11... no
configure: error: *** A compiler with support for C++11 language features is required.
Makefile:9451: recipe for target 'configure-gdb' failed
make[1]: *** [configure-gdb] Error 1
make[1]: Leaving directory '/home/pedro/brno/pedro/gdb/mygit/cxx-convertion/build-gcc-4.7'
If we need to revert back to making C++11 optional, all that's
necessary is to change the "mandatory" to "optional" in configure.ac
and regenerate configure (both gdb and gdbserver).
gdb/ChangeLog:
2016-10-28 Pedro Alves <palves@redhat.com>
* Makefile.in (CXX_DIALECT): Get from configure.
(COMPILE.pre, CC_LD): Append $(CXX_DIALECT).
(FLAGS_TO_PASS): Pass CXX_DIALECT.
* acinclude.m4: Include ax_cxx_compile_stdcxx.m4.
* ax_cxx_compile_stdcxx.m4: Add FSF copyright header. Set and
AC_SUBST CXX_DIALECT instead of changing CXX/CXXCPP.
* configure.ac: Call AX_CXX_COMPILE_STDCXX.
* config.in: Regenerate.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2016-10-28 Pedro Alves <palves@redhat.com>
* Makefile.in (CXX_DIALECT): Get from configure.
(COMPILE.pre, CC_LD): Append $(CXX_DIALECT).
* acinclude.m4: Include ../ax_cxx_compile_stdcxx.m4.
* configure.ac: Call AX_CXX_COMPILE_STDCXX.
* config.in: Regenerate.
* configure: Regenerate.
If the target can do software single step, it can do range
stepping.
gdb/gdbserver:
2016-10-27 Yao Qi <yao.qi@linaro.org>
* linux-low.c (linux_supports_agent): Return true if
can_software_single_step return true.
Nowadays, we select events to be reported to GDB in random, however
that is not enough when many GDBserver internal events (not reported
to GDB) are generated.
GDBserver pulls all events out of kernel via waitpid, and leave them
pending. When goes through threads which have pending events,
GDBserver uses find_inferior to find the first thread which has
pending event, and consumes it. Note that find_inferior always
iterate threads in a fixed order. If multiple threads keep hitting
GDBserver breakpoints, range stepping with single-step breakpoint for
example, threads in the head of the thread list are more likely to be
processed and threads in the tail are starved. This causes some timeout
fails in gdb.threads/non-stop-fair-events.exp when range stepping is
enabled on arm-linux.
This patch fixes this issue by randomly selecting pending events. It
adds a new function find_inferior_in_random, which iterates threads
which have pending events randomly.
gdb/gdbserver:
2016-10-27 Yao Qi <yao.qi@linaro.org>
* inferiors.c (find_inferior_in_random): New function.
* inferiors.h (find_inferior_in_random): Declare.
* linux-low.c (linux_wait_for_event_filtered): Call
find_inferior_in_random instead of find_inferior.
This patch removes single-step breakpoints if the event is only
GDBserver internal, IOW, isn't reported back to GDB.
gdb/gdbserver:
2016-10-27 Yao Qi <yao.qi@linaro.org>
* linux-low.c (linux_wait_1): If single-step breakpoints are
inserted, remove them.
Currently GDB never sends more than one action per vCont packet, when
connected in non-stop mode. A follow up patch will change that, and
it exposed a gdbserver problem with the vCont handling.
For example, this in non-stop mode:
=> vCont;s:p1.1;c
<= OK
Should be equivalent to:
=> vCont;s:p1.1
<= OK
=> vCont;c
<= OK
But gdbserver currently doesn't handle this. In the latter case,
"vCont;c" makes gdbserver clobber the previous step request. This
patch fixes that.
Note the server side must ignore resume actions for the thread that
has a pending %Stopped notification (and any other threads with events
pending), until GDB acks the notification with vStopped. Otherwise,
e.g., the following case is mishandled:
#1 => g (or any other packet)
#2 <= [registers]
#3 <= %Stopped T05 thread:p1.2
#4 => vCont s:p1.1;c
#5 <= OK
Above, the server must not resume thread p1.2 when it processes the
vCont. GDB can't know that p1.2 stopped until it acks the %Stopped
notification. (Otherwise it wouldn't send a default "c" action.)
(The vCont documentation already specifies this.)
Finally, special care must also be given to handling fork/vfork
events. A (v)fork event actually tells us that two processes stopped
-- the parent and the child. Until we follow the fork, we must not
resume the child. Therefore, if we have a pending fork follow, we
must not send a global wildcard resume action (vCont;c). We can still
send process-wide wildcards though.
(The comments above will be added as code comments to gdb in a follow
up patch.)
gdb/gdbserver/ChangeLog:
2016-10-26 Pedro Alves <palves@redhat.com>
* linux-low.c (handle_extended_wait): Link parent/child fork
threads.
(linux_wait_1): Unlink them.
(linux_set_resume_request): Ignore resume requests for
already-resumed and unhandled fork child threads.
* linux-low.h (struct lwp_info) <fork_relative>: New field.
* server.c (in_queued_stop_replies_ptid, in_queued_stop_replies):
New functions.
(handle_v_requests) <vCont>: Don't call require_running.
* server.h (in_queued_stop_replies): New declaration.
I got the following warning if I build GDBserver for aarch64_be-linux-gnu,
git/gdb/gdbserver/linux-aarch64-low.c:1539:39: error: invalid conversion from 'void*' to 'uint32_t* {aka unsigned int*}' [-fpermissive]
uint32_t *le_buf = xmalloc (byte_len);
^
The patch is to fix the warning.
gdb/gdbserver:
2016-10-24 Yao Qi <yao.qi@linaro.org>
PR server/20733
* linux-aarch64-low.c (append_insns): Cast the return value to
'uint32_t *'.
This patch shares "enum arm_breakpoint_kinds", and use ARM_BP_KIND_THUMB2
in GDB.
gdb:
2016-10-10 Yao Qi <yao.qi@linaro.org>
* arch/arm.h (enum arm_breakpoint_kinds): New.
* arm-tdep.c (arm_remote_breakpoint_from_pc): Use
ARM_BP_KIND_THUMB2.
gdb/gdbserver:
2016-10-10 Yao Qi <yao.qi@linaro.org>
* linux-aarch32-low.c (enum arm_breakpoint_kinds): Remove.
This simple commit consolidates the API of
target_supports_multi_process. Since both GDB and gdbserver use the
same function prototype, all that was needed was to move create this
prototype on gdb/target/target.h and turn the macros declared on
gdb/{,gdbserver/}target.h into actual functions.
Regtested (clean pass) on the BuildBot.
gdb/ChangeLog:
2016-10-06 Sergio Durigan Junior <sergiodj@redhat.com>
* target.c (target_supports_multi_process): New function, moved
from...
* target.h (target_supports_multi_process): ... here. Remove
macro.
* target/target.h (target_supports_multi_process): New prototype.
gdb/gdbserver/ChangeLog:
2016-10-06 Sergio Durigan Junior <sergiodj@redhat.com>
* target.c (target_supports_multi_process): New function, moved
from...
* target.h (target_supports_multi_process): ... here. Remove
macro.
handle_tracepoint_bkpts has two parallel "if"s. This changes the
second one to check ipa_error_tracepoint, which seems to be what was
intended.
2016-10-05 Tom Tromey <tom@tromey.com>
PR remote/20655:
* tracepoint.c (handle_tracepoint_bkpts): Check
ipa_error_tracepoint, not ipa_stopping_tracepoint.
0a69eedb (Clean up the XML files for ARM) breaks the GDBserver build
on aarch64 because some arm-*.xml files can't be found.
This patch is to fix the build failure.
gdb/gdbserver:
2016-10-05 Yao Qi <yao.qi@linaro.org>
* configure.srv: Update the path of arm-*.xml files.
This patch is move features/arm-*.xml to features/arm/, and it is based
on Terry's patch posted here
https://sourceware.org/ml/gdb-patches/2014-06/msg00794.html
One comment to Terry's patch is about losing "arm" prefix, and the new
patch fixes this problem.
gdb:
2016-10-05 Terry Guo <terry.guo@arm.com>
Yao Qi <yao.qi@linaro.org>
* arm-tdep.c: Adjust includes.
* features/Makefile (WHICH): Add "arm/" directory to arm
target descriptions.
(XMLTOC): Likewise.
(arm/arm-with-iwmmxt.dat): Adjust the path for
dependencies.
* features/arm-core.xml: Moved to ...
* features/arm/arm-core.xml: ... it.
* features/arm-fpa.xml: Moved to ...
* features/arm/arm-fpa.xml: ... it.
* features/arm-m-profile.xml: Moved to ...
* features/arm/arm-m-profile.xm: ... it.
* features/arm-vfpv2.xml: Moved to ...
* features/arm/arm-vfpv2.xm: ... it.
* features/arm-vfpv3.xml: Moved to ...
* features/arm/arm-vfpv3.xml: ... it.
* features/arm-with-iwmmxt.c: Moved to ...
* features/arm/arm-with-iwmmxt.c: ... it.
* features/arm-with-iwmmxt.xml: Moved to ...
* features/arm/arm-with-iwmmxt.xml: ... it.
* features/arm-with-m-fpa-layout.c: Moved to ...
* features/arm/arm-with-m-fpa-layout.c: ... it.
* features/arm-with-m-fpa-layout.xml: Moved to ...
* features/arm/arm-with-m-fpa-layout.xml: ... it.
* features/arm-with-m-vfp-d16.c: Moved to ...
* features/arm/arm-with-m-vfp-d16.c: ... it.
* features/arm-with-m-vfp-d16.xml: Moved to ...
* features/arm/arm-with-m-vfp-d16.xml: ... it.
* features/arm-with-m.c: Moved to ...
* features/arm/arm-with-m.c: ... it.
* features/arm-with-m.xml: Moved to ...
* features/arm/arm-with-m.xm: ... it.
* features/arm-with-neon.c: Moved to ...
* features/arm/arm-with-neon.c: ... it.
* features/arm-with-neon.xml: Moved to ...
* features/arm/arm-with-neon.xml: ... it.
* features/arm-with-vfpv2.c: Moved to ...
* features/arm/arm-with-vfpv2.c: ... it.
* features/arm-with-vfpv2.xml: Moved to ...
* features/arm/arm-with-vfpv2.xml: ... it.
* features/arm-with-vfpv3.c: Moved to ...
* features/arm/arm-with-vfpv3.c: ... it.
* features/arm-with-vfpv3.xml: Moved to ...
* features/arm/arm-with-vfpv3.xml: ... it.
* features/xscale-iwmmxt.xml: Moved to ...
* features/arm/xscale-iwmmxt.xml: ... it.
gdb/gdbserver:
2016-10-05 Terry Guo <terry.guo@arm.com>
Yao Qi <yao.qi@linaro.org>
* Makefile.in: Adjust the path of rules.
* configure.srv: Update the path of xml files.
* regformats/arm-with-iwmmxt.dat: Regenerated.
* regformats/arm-with-neon.dat: Likewise.
* regformats/arm-with-vfpv2.dat: Likewise.
* regformats/arm-with-vfpv3.dat Likewise.
Commit 049a8570 (Use target_continue{,_no_signal} instead of target_resume)
replaces the code stopping lwp with target_continue_no_signal in
target_stop_and_wait, like this,
- resume_info.thread = ptid;
- resume_info.kind = resume_stop;
- resume_info.sig = GDB_SIGNAL_0;
- (*the_target->resume) (&resume_info, 1);
+ target_continue_no_signal (ptid);
the replacement is not equivalent, and it causes PR 20627. This patch
is just to revert that change.
Regression testing it on x86_64-linux.
gdb/gdbserver:
2016-09-30 Yao Qi <yao.qi@linaro.org>
PR gdbserver/20627
* target.c (target_stop_and_wait): Don't call
target_continue_no_signal, use resume_stop instead.
When I read the GDBserver debug message, I find the "entering" of
linux_wait_1 doesn't match the "existing" of linux_wait_1. Looks
we don't call debug_exit somewhere in linux_wait_1 on return.
gdb/gdbserver:
2016-09-26 Yao Qi <yao.qi@linaro.org>
* linux-low.c (linux_wait_1): Call debug_exit.
If xmalloc fails allocating memory, usually because something tried a
huge allocation, like xmalloc(-1) or some such, GDB asks the user what
to do:
.../src/gdb/utils.c:1079: internal-error: virtual memory exhausted.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
If the user says "n", that throws a QUIT exception, which is caught by
one of the multiple CATCH(RETURN_MASK_ALL) blocks somewhere up the
stack.
The default implementations of operator new / operator new[] call
malloc directly, and on memory allocation failure throw
std::bad_alloc. Currently, if that happens, since nothing catches it,
the exception escapes out of main, and GDB aborts from unhandled
exception.
This patch replaces the default operator new variants with versions
that, just like xmalloc:
#1 - Raise an internal-error on memory allocation failure.
#2 - Throw a QUIT gdb_exception, so that the exact same CATCH blocks
continue handling memory allocation problems.
A minor complication of #2 is that operator new can _only_ throw
std::bad_alloc, or something that extends it:
void* operator new (std::size_t size) throw (std::bad_alloc);
That means that if we let a gdb QUIT exception escape from within
operator new, the C++ runtime aborts due to unexpected exception
thrown.
So to bridge the gap, this patch adds a new gdb_quit_bad_alloc
exception type that inherits both std::bad_alloc and gdb_exception,
and throws _that_.
If we decide that we should be catching memory allocation errors in
fewer places than all the places we currently catch them (everywhere
we use RETURN_MASK_ALL currently), then we could change operator new
to throw plain std::bad_alloc then. But I'm considering such a change
as separate matter from this one -- it'd make sense to do the same to
xmalloc at the same time, for instance.
Meanwhile, this allows using new/new[] instead of xmalloc/XNEW/etc.
without losing the "virtual memory exhausted" internal-error
safeguard.
Tested on x86_64 Fedora 23.
gdb/ChangeLog:
2016-09-23 Pedro Alves <palves@redhat.com>
* Makefile.in (SFILES): Add common/new-op.c.
(COMMON_OBS): Add common/new-op.o.
(new-op.o): New rule.
* common/common-exceptions.h: Include <new>.
(struct gdb_quit_bad_alloc): New type.
* common/new-op.c: New file.
gdb/gdbserver/ChangeLog:
2016-09-23 Pedro Alves <palves@redhat.com>
* Makefile.in (SFILES): Add common/new-op.c.
(OBS): Add common/new-op.o.
(new-op.o): New rule.
This patch adds a bunch of generated files to gdb's gitignore files.
There are still a bunch of "stamp" files that are not ignored, but I
think the rule for them should be put in the top-level gitignore.
Users and developers are encouraged to build out-of-tree, but some
people prefer the simplicity to build in-tree, so it should be useful
for them.
gdb/ChangeLog:
* .gitignore: Ignore more files.
* data-directory/.gitignore: Likewise.
gdb/doc/ChangeLog:
* .gitignore: New file.
gdb/gdbserver/ChangeLog:
* .gitinore: Ignore more files.
gdb/testsuite/ChangeLog:
* .gitignore: New file.
In patch https://sourceware.org/ml/gdb-patches/2016-04/msg00529.html
I cleared reserved bits when reading CPSR. It makes a problem that
these bits (zero) are written back to kernel through ptrace, and it
changes the state of the processor on some recent kernel, which is
unexpected.
In this patch, I keep these reserved bits when write CPSR back to
hardware.
gdb:
2016-09-21 Yao Qi <yao.qi@linaro.org>
* aarch32-linux-nat.c (aarch32_gp_regcache_collect): Keep
bits 20 to 23.
gdb/gdbserver:
2016-09-21 Yao Qi <yao.qi@linaro.org>
* linux-aarch32-low.c (arm_fill_gregset): Keep bits 20 to
23.
This patch consolidates the API of target_mourn_inferior between GDB
and gdbserver, in my continuing efforts to make sharing the
fork_inferior function possible between both.
GDB's version of the function did not care about the inferior's ptid
being mourned, but gdbserver's needed to know this information. Since
it actually makes sense to pass the ptid as an argument, instead of
depending on a global value directly (which GDB's version did), I
decided to make the generic API to accept it. I then went on and
extended all calls being made on GDB to include a ptid argument (which
ended up being inferior_ptid most of the times, anyway), and now we
have a more sane interface.
On GDB's side, after talking to Pedro a bit about it, we decided that
just an assertion to make sure that the ptid being passed is equal to
inferior_ptid would be enough for now, on the GDB side. We can remove
the assertion and perform more operations later if we ever pass
anything different than inferior_ptid.
Regression tested on our BuildBot, everything OK.
I'd appreciate a special look at gdb/windows-nat.c's modification
because I wasn't really sure what to do there. It seemed to me that
maybe I should build a ptid out of the process information there, but
then I am almost sure the assertion on GDB's side would trigger.
gdb/ChangeLog:
2016-09-19 Sergio Durigan Junior <sergiodj@redhat.com>
* darwin-nat.c (darwin_kill_inferior): Adjusting call to
target_mourn_inferior to include ptid_t argument.
* fork-child.c (startup_inferior): Likewise.
* gnu-nat.c (gnu_kill_inferior): Likewise.
* inf-ptrace.c (inf_ptrace_kill): Likewise.
* infrun.c (handle_inferior_event_1): Likewise.
* linux-nat.c (linux_nat_attach): Likewise.
(linux_nat_kill): Likewise.
* nto-procfs.c (interrupt_query): Likewise.
(procfs_interrupt): Likewise.
(procfs_kill_inferior): Likewise.
* procfs.c (procfs_kill_inferior): Likewise.
* record.c (record_mourn_inferior): Likewise.
* remote-sim.c (gdbsim_kill): Likewise.
* remote.c (remote_detach_1): Likewise.
(remote_kill): Likewise.
* target.c (target_mourn_inferior): Change declaration to accept
new ptid_t argument; use gdb_assert on it.
* target.h (target_mourn_inferior): Move function prototype from
here...
* target/target.h (target_mourn_inferior): ... to here. Adjust it
to accept new ptid_t argument.
* windows-nat.c (get_windows_debug_event): Adjusting call to
target_mourn_inferior to include ptid_t argument.
gdb/gdbserver/ChangeLog:
2016-09-19 Sergio Durigan Junior <sergiodj@redhat.com>
* server.c (start_inferior): Call target_mourn_inferior instead of
mourn_inferior; pass ptid_t argument to it.
(resume): Likewise.
(handle_target_event): Likewise.
* target.c (target_mourn_inferior): New function.
* target.h (mourn_inferior): Delete macro.
Add the function lwp_is_stepping which indicates whether the given LWP
is currently single-stepping. This is a common interface, usable from
native GDB as well as from gdbserver.
gdb/gdbserver/ChangeLog:
* linux-low.c (lwp_is_stepping): New function.
gdb/ChangeLog:
* nat/linux-nat.h (lwp_is_stepping): New declaration.
* linux-nat.c (lwp_is_stepping): New function.
The last commit was supposed to have the reference to ptrace () removed.
The patch didn't get updated correctly before the commit. This commit
fixes the comment as requested
gdbserver/ChangeLog
2016-09-06 Carl Love <cel@us.ibm.com>
* server.c (start_inferior): Fixed comment, requested comment change
didn't get updated correctly. Removed reference to ptrace () call as
it is only true on Linux systems.
The test checks to make sure GDB exits cleanly if there is
no valid target binary. Currently, ppc and S390 fail on this
test. The function target_post_create_inferior () calls
linux_post_create_inferior () which calls the architecture
specific functions s390_arch_setup () and ppc_arch_setup ()
which make ptrace calls to access the architecture specific
registers. These ptrace calls fail because the process does
not exist causing GDB to exit on error.
This patch checks to see if the initial ptrace (PTRACE_TRACEME, ...)
call returned a status of TARGET_WAITKIND_EXITED indicating the
target has already exited. If the target has exited, then the
target_post_create_inferior () is not called since there is no
inferior to be setup. The test to see if the initial ptrace
call succeeded is done after the ptrace (PTRACE_TRACEME, ...)
call and the wait for the inferior process to stop, assuming
it exists, has occurred.
The patch has been tested on X86 64-bit, ppc64 and s390. If
fixes the test failures on ppc64 and s390. The test does not
fail on X86 64-bit. The patch does not introduce any additional
regression failures on any of these three platforms.
gdbserver/ChangeLog
2016-09-06 Carl Love <cel@us.ibm.com>
* server.c (start_inferior): Do not call
function target_post_create_inferior () if the
inferior process has already exited.
This removes all support for building gdb & gdbserver with a C
compiler from gdb & gdbserver's build machinery.
gdb/ChangeLog:
2016-09-05 Pedro Alves <palves@redhat.com>
* NEWS: Mention that a C++ compiler is now required.
* Makefile.in (COMPILER, COMPILER_CFLAGS): Remove.
(COMPILE.pre, CC_LD): Use CXX directly.
(INTERNAL_CFLAGS_BASE): Use CXXFLAGS directly.
* acinclude.m4: Don't include build-with-cxx.m4.
* build-with-cxx.m4: Delete file.
* configure.ac: Remove GDB_AC_BUILD_WITH_CXX call.
* warning.m4: Assume $enable_build_with_cxx is yes.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2016-09-05 Pedro Alves <palves@redhat.com>
* Makefile.in (COMPILER, COMPILER_CFLAGS): Remove.
(COMPILE.pre, CC_LD): Use CXX directly.
(INTERNAL_CFLAGS_BASE): Use CXXFLAGS directly.
* acinclude.m4: Don't include build-with-cxx.m4.
* configure.ac: Remove GDB_AC_BUILD_WITH_CXX call.
* configure: Regenerate.
reinsert_breakpoint is used for software single step, so it is more
clear to rename it to single_step_breakpoint. This was pointed out in
the review https://sourceware.org/ml/gdb-patches/2016-05/msg00429.html
I don't rename "other_breakpoint" in this patch.
gdb/gdbserver:
2016-09-02 Yao Qi <yao.qi@linaro.org>
* linux-low.c: Replace "reinsert_breakpoints" with
"single_step_breakpoints". Replace "reinsert breakpoints"
with "single-step breakpoints".
* mem-break.c: Likewise.
* mem-break.h: Likewise.
This commit moves the target_wait prototype from the GDB-specific
target.h header to the common target/target.h header. Then, it
creates a compatible implementation of target_wait on gdbserver using
the_target->wait, and adjusts the (only) caller (mywait function).
Pretty straightforward, no regressions introduced.
gdb/gdbserver/ChangeLog:
2016-09-01 Sergio Durigan Junior <sergiodj@redhat.com>
* target.c (mywait): Call target_wait instead of
the_target->wait.
(target_wait): New function.
gdb/ChangeLog:
2016-09-01 Sergio Durigan Junior <sergiodj@redhat.com>
* target.c (target_wait): Mention that the function's prototype
can be found at target/target.h.
* target.h (target_wait): Move prototype from here...
* target/target.h (target_wait): ... to here.
This commit implements a new function, target_continue, on top of the
target_resume function. Then, it replaces all calls to target_resume
by calls to target_continue or to the already existing
target_continue_no_signal.
This is one of the (many) necessary steps needed to consolidate the
target interface between GDB and gdbserver. In particular, I am
interested in the impact this change will have on the unification of
the fork_inferior function (which I have been working on).
Tested on the BuildBot, no regressions introduced.
gdb/gdbserver/ChangeLog:
2016-09-31 Sergio Durigan Junior <sergiodj@redhat.com>
* server.c (start_inferior): New variable 'ptid'. Replace calls
to the_target->resume by target_continue{,_no_signal}, depending
on the case.
* target.c (target_stop_and_wait): Call target_continue_no_signal
instead of the_target->resume.
(target_continue): New function.
gdb/ChangeLog:
2016-09-31 Sergio Durigan Junior <sergiodj@redhat.com>
* fork-child.c (startup_inferior): Replace calls to target_resume
by target_continue{,_no_signal}, depending on the case.
* linux-nat.c (cleanup_target_stop): Call
target_continue_no_signal instead of target_resume.
* procfs.c (procfs_wait): Likewise.
* target.c (target_continue): New function.
* target/target.h (target_continue): New prototype.
This patch fixes imbalanced lwp_suspend/unsuspend calls caused by the
premature choosing of another event for fairness.
select_event_lwp would switch the event before a call to
unsuspend_all_lwps, thus it would be called with the wrong event.
This caused an assertion failure: unsuspend LWP xx, suspended=-1 when
testing gdb.threads/non-stop-fair-events.exp with ARM range stepping in
GDBServer.
This patch moves the switch of event after the unsuspend/unstop calls.
No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-native.
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_wait_1): Move event switch after unsuspend_lwps.
GLIBC BZ#20311 [1] proc_service.h install patch also remove 'const'
attributes from ps_get_thread_area and comment #15 discuss why to remove
the const attribute (basically since it a callback with the struct
ps_prochandle owned by the client it should be able to modify it if
it the case).
On default build this is not the issue and current g++ does not trigger
any issue with this mismatch declaration. However, on some bootstrap
build configuration where gdbserver is build with gcc instead this
triggers:
error: conflicting types for 'ps_get_thread_area'
This patch fixes it by syncing the declaration with GLIBC.
[1] https://sourceware.org/bugzilla/show_bug.cgi?id=20311
gdb/ChangeLog:
2016-08-25 Adhemerval Zanella <adhemerval.zanella@linaro.org>
* aarch64-linux-nat.c (ps_get_thread_area): Remove const from
struct ps_prochandle.
* amd64-linux-nat.c (ps_get_thread_area): Likewise.
* arm-linux-nat.c (ps_get_thread_area): Likewise.
* gdb_proc_service.h (ps_get_thread_area): Likewise.
* i386-linux-nat.c (ps_get_thread_area): Likewise.
* m68klinux-nat.c (ps_get_thread_area): Likewise.
* mips-linux-nat.c (ps_get_thread_area): Likewise.
* nat/aarch64-linux.c (aarch64_ps_get_thread_area): Likewise.
* nat/aarch64-linux.h (aarch64_ps_get_thread_area): Likewise.
* xtensa-linux-nat.c (ps_get_thread_area): Likewise.
gdb/gdbserver/ChangeLog:
2016-08-25 Adhemerval Zanella <adhemerval.zanella@linaro.org>
PR server/20491
* gdb_proc_service.h (ps_get_thread_area): Remove const from struct
ps_prochandle.
* linux-aarch64-low.c (ps_get_thread_area): Likewise.
* linux-arm-low.c (ps_get_thread_area): Likewise.
* linux-crisv32-low.c (ps_get_thread_area): Likewise.
* linux-m68k-low.c (ps_get_thread_area): Likewise.
* linux-mips-low.c (ps_get_thread_area): Likewise.
* linux-nios2-low.c (ps_get_thread_area): Likewise.
* linux-tic6x-low.c (ps_get_thread_area): Likewise.
* linux-x86-low.c (ps_get_thread_area): Likewise.
* linux-xtensa-low.c (ps_get_thread_area): Likewise.
Running fast tracepoint tests on x32 exposes a latent bug in the agent
bytecode jitting. There's a code path that forgets to emit the call
opcode... Whoops. Fixes a bunch of gdb.trace/trace-condition.exp
FAILs, like:
(gdb)
continue
Continuing.
Thread 1 "trace-condition" received signal SIGSEGV, Segmentation fault.
0x7ffec016 in ?? ()
(gdb) FAIL: gdb.trace/trace-condition.exp: ftrace: $rip == *set_point: advance through tracing
gdb/gdbserver/ChangeLog:
2016-08-19 Pedro Alves <palves@redhat.com>
* linux-x86-low.c (amd64_emit_call): Emit missing call opcode.
We're casting through unsigned long to write a 64-bit immediate
operand of movabs (the comment said movl, but that was incorrect).
The problem is that unsigned long is 32-bit on x32, so we were writing
fewer bytes than necessary.
Fix this by using an 8 byte memcpy like in other similar places in the
function.
gdb/gdbserver/ChangeLog:
2016-08-19 Pedro Alves <palves@redhat.com>
* linux-x86-low.c (amd64_install_fast_tracepoint_jump_pad): Fix
comment. Use memcpy instead of casting through unsigned long.
MAP_32BIT is ignored on x32, meaning the jump pad can end up somewhere
between 2GB and 4GB, too far away from the executable for 5-byte
relative jumps (JMP rel32). So on x32, try explicitly placing the
jump pad near the middle of the available address space.
gdb/gdbserver/ChangeLog:
2016-08-19 Pedro Alves <palves@redhat.com>
* linux-amd64-ipa.c (alloc_jump_pad_buffer) [__ILP32__]: Try
allocating around 0x80000000.
Building GDB for x32 fails building the IPA, with:
.../src/gdb/gdbserver/linux-amd64-ipa.c: In function ‘const target_desc* get_ipa_tdesc(int)’:
.../src/gdb/gdbserver/linux-amd64-ipa.c:182:14: error: ‘tdesc_amd64_avx_linux’ was not declared in this scope
return tdesc_amd64_avx_linux;
^
.../src/gdb/gdbserver/linux-amd64-ipa.c:184:14: error: ‘tdesc_amd64_mpx_linux’ was not declared in this scope
return tdesc_amd64_mpx_linux;
^
.../src/gdb/gdbserver/linux-amd64-ipa.c:186:14: error: ‘tdesc_amd64_avx_mpx_linux’ was not declared in this scope
return tdesc_amd64_avx_mpx_linux;
^
[...]
The problem is that the IPA is trying to use the 64-bit descriptions,
when it should be using the x32 ones.
gdb/gdbserver/ChangeLog:
2016-08-19 Pedro Alves <palves@redhat.com>
PR gdb/20415
* Makefile.in (x32-linux-ipa.o, x32-avx-linux-ipa.o)
(x32-avx512-linux-ipa.o): New rules.
* configure.ac (x86_64-*-linux*): New x32 check.
* configure.srv (ipa_x32_linux_regobj): New.
(x86_64-*-linux*): Use $ipa_x32_linux_regobj if building for x32.
* linux-amd64-ipa.c (get_ipa_tdesc) [__ILP32__]: Return x32
descriptions.
(initialize_low_tracepoint) [__ILP32__]: Initialize x32
descriptions.
* configure: Regenerate.
gdb's (or gdbserver's) own signal handling should not interfere with
the signal dispositions their spawned children inherit. However, it
currently does. For example, some paths in gdb cause SIGPIPE to be
set to SIG_IGN, and as consequence, the child starts with SIGPIPE to
set to SIG_IGN too, even though gdb was started with SIGPIPE set to
SIG_DFL.
This is because the exec family of functions does not reset the signal
disposition of signals that are set to SIG_IGN:
http://pubs.opengroup.org/onlinepubs/7908799/xsh/execve.html
Signals set to the default action (SIG_DFL) in the calling process
image are set to the default action in the new process
image. Signals set to be ignored (SIG_IGN) by the calling process
image are set to be ignored by the new process image. Signals set to
be caught by the calling process image are set to the default action
in the new process image (see <signal.h>).
And neither does it reset signal masks or flags.
In order to be transparent, when spawning new child processes to debug
(with "run", etc.), reset signal actions and mask back to what was
originally inherited from gdb/gdbserver's parent, just before execing
the target program to debug.
gdb/ChangeLog:
2016-08-09 Pedro Alves <palves@redhat.com>
PR gdb/18653
* Makefile.in (SFILES): Add
common/signals-state-save-restore.c.
(HFILES_NO_SRCDIR): Add common/signals-state-save-restore.h.
(COMMON_OBS): Add signals-state-save-restore.o.
(signals-state-save-restore.o): New rule.
* configure: Regenerate.
* fork-child.c: Include "signals-state-save-restore.h".
(fork_inferior): Call restore_original_signals_state.
* main.c: Include "signals-state-save-restore.h".
(captured_main): Call save_original_signals_state.
* common/common.m4: Add sigaction to AC_CHECK_FUNCS checks.
* common/signals-state-save-restore.c: New file.
* common/signals-state-save-restore.h: New file.
gdb/gdbserver/ChangeLog:
2016-08-09 Pedro Alves <palves@redhat.com>
PR gdb/18653
* Makefile.in (OBS): Add signals-state-save-restore.o.
(signals-state-save-restore.o): New rule.
* config.in: Regenerate.
* configure: Regenerate.
* linux-low.c: Include "signals-state-save-restore.h".
(linux_create_inferior): Call
restore_original_signals_state.
* server.c: Include "dispositions-save-restore.h".
(captured_main): Call save_original_signals_state.
gdb/testsuite/ChangeLog:
2016-08-09 Pedro Alves <palves@redhat.com>
PR gdb/18653
* gdb.base/signals-state-child.c: New file.
* gdb.base/signals-state-child.exp: New file.
* gdb.gdb/selftest.exp (do_steps_and_nexts): Add new pattern.
We build by default with a C++ compiler, but "configure --help" still
says "--enable-build-with-cxx", which hints that it is by default
disabled. Update the --help text.
gdb/ChangeLog:
2016-08-05 Pedro Alves <palves@redhat.com>
* build-with-cxx.m4: Change help string to be in terms of
--disable-build-with-cxx.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2016-08-05 Pedro Alves <palves@redhat.com>
* configure: Regenerate.
When I run process-dies-while-detaching.exp with GDBserver, I see many
warnings printed by GDBserver,
ptrace(regsets_fetch_inferior_registers) PID=26183: No such process
ptrace(regsets_fetch_inferior_registers) PID=26183: No such process
ptrace(regsets_fetch_inferior_registers) PID=26184: No such process
ptrace(regsets_fetch_inferior_registers) PID=26184: No such process
regsets_fetch_inferior_registers is called when GDBserver resumes each
lwp.
#2 0x0000000000428260 in regsets_fetch_inferior_registers (regsets_info=0x4690d0 <aarch64_regsets_info>, regcache=0x31832020)
at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/linux-low.c:5412
#3 0x00000000004070e8 in get_thread_regcache (thread=0x31832940, fetch=fetch@entry=1) at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/regcache.c:58
#4 0x0000000000429c40 in linux_resume_one_lwp_throw (info=<optimized out>, signal=0, step=0, lwp=0x31832830)
at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/linux-low.c:4463
#5 linux_resume_one_lwp (lwp=0x31832830, step=<optimized out>, signal=<optimized out>, info=<optimized out>)
at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/linux-low.c:4573
The is the case that threads are disappeared when GDB/GDBserver resumes
them. We check errno for ESRCH, and don't print error messages, like
what we are doing in regsets_store_inferior_registers.
gdb/gdbserver:
2016-08-04 Yao Qi <yao.qi@linaro.org>
* linux-low.c (regsets_fetch_inferior_registers): Check
errno is ESRCH or not.
As a result of this commit,
9b4c5f878f
(Remove support for thread events without PTRACE_EVENT_CLONE in GDBServer.)
the last usage of td_ta_event_addr td_ta_set_event and
td_ta_event_getmsg were removed. They are no longer used. This patch
is to remove them.
gdb/gdbserver:
2016-08-02 Yao Qi <yao.qi@linaro.org>
* thread-db.c (struct thread_db) <td_ta_event_getmsg_p>: Remove.
<td_ta_set_event_p, td_ta_event_addr_p>: Remove.
(thread_db_load_search): Update.
(try_thread_db_load_1): Don't look for td_ta_event_addr,
td_ta_set_event and td_ta_event_getmsg.
Debugging an x32 process with an x32 gdbserver always results in:
(gdb) c
Continuing.
Program received signal SIGSEGV, Segmentation fault.
0xf7de9600 in _dl_debug_state () from target:/libx32/ld-linux-x32.so.2
(gdb)
Looking at the remote debug logs reveals the problem, here:
Packet received: T05swbreak:;06:a0d4ffff00000000;07:b8d3ffff00000000;10:0096def701000000;thread:p7d7a.7d7a;core:1;
^^^^^^^^^^^^^^^^
The underlined value is the expedited value of RIP (in little endian).
But notice that 01 in 0x01f7de9600, while gdb says the program stopped
at 0xf7de9600. 0x01ffffffff is over 32 bits, which indicates that
something wen't wrong somewhere in gdbserver.
The problem turns out to be in gdbserver's x86_get_pc / x86_set_pc
routines, where "unsigned long" is used assuming that it can fit a
64-bit value, while unsigned long is actually 32-bit on x32. The
result is that collect_register_by_name / supply_register_by_name end
up reading/writing random bytes off the stack.
Fix this by using explicit uint64_t instead of unsigned long.
For consistency, use uint32_t instead of unsigned int in the 32-bit
paths.
gdb/gdbserver/ChangeLog:
2016-07-26 Pedro Alves <palves@redhat.com>
PR server/20414
* linux-x86-low.c (x86_get_pc, x86_set_pc): Use uint64_t instead
of unsigned long for 64-bit registers and use uint32_t instead of
unsigned int for 32-bit registers.
Building an x32 gdb trips on a static assertion:
In file included from .../src/gdb/common/common-defs.h:71:0,
from .../src/gdb/nat/amd64-linux-siginfo.c:21:
.../src/gdb/common/gdb_assert.h:26:66: error: size of array ‘never_defined_just_used_for_checking’ is negative
extern int never_defined_just_used_for_checking[(expr) ? 1 : -1]
^
.../src/gdb/nat/amd64-linux-siginfo.c:113:1: note: in expansion of macro ‘gdb_static_assert’
gdb_static_assert (sizeof (nat_siginfo_t) == sizeof (siginfo_t));
^
The problem is that the way nat_siginfo_t is defined, it can only
match the host's siginfo_t object when gdb is built as a 64-bit
program.
Several bits of nat_siginfo_t are off:
- nat_siginfo_t's _pad field's definition is:
int _pad[((128 / sizeof (int)) - 4)];
while /usr/include/bits/siginfo.h has:
# define __SI_MAX_SIZE 128
# if __WORDSIZE == 64
# define __SI_PAD_SIZE ((__SI_MAX_SIZE / sizeof (int)) - 4)
# else
# define __SI_PAD_SIZE ((__SI_MAX_SIZE / sizeof (int)) - 3)
# endif
and __WORDSIZE == 32 for x32. This is what causes the size of
nat_siginfo_t to be wrong and the assertion to fail.
- the nat_clock_t type is incorrect for 64-bit. We have this:
/* For native 64-bit, clock_t in _sigchld is 64bit aligned at 4 bytes. */
typedef long __attribute__ ((__aligned__ (4))) nat_clock_t;
however, /usr/include/bits/siginfo.h has:
# if defined __x86_64__ && __WORDSIZE == 32
/* si_utime and si_stime must be 4 byte aligned for x32 to match the
kernel. We align siginfo_t to 8 bytes so that si_utime and si_stime
are actually aligned to 8 bytes since their offsets are multiple of
8 bytes. */
typedef __clock_t __attribute__ ((__aligned__ (4))) __sigchld_clock_t;
# define __SI_ALIGNMENT __attribute__ ((__aligned__ (8)))
# else
typedef __clock_t __sigchld_clock_t;
# define __SI_ALIGNMENT
# endif
So we're currently forcing 4-byte alignment on clock_t, when it
should only be so for x32, not 64-bit.
The fix:
- Leaves nat_siginfo_t strictly for the 64-bit ABI.
- Adds a new typedef for the siginfo type that ptrace uses
(ptrace_siginfo_t). An x32 gdb always gets/sets an x32 siginfo_t
type with PTRACE_GETSIGINFO/PTRACE_SETSIGINFO.
- Uses this new ptrace_siginfo_t type instead of nat_siginfo_t as the
intermediate conversion type.
gdb/ChangeLog:
2016-07-26 Pedro Alves <palves@redhat.com>
* amd64-linux-nat.c (amd64_linux_siginfo_fixup): Rename 'native'
parameter to 'ptrace'.
* nat/amd64-linux-siginfo.c (GDB_SI_SIZE): New define.
(nat_uptr_t): New an unsigned long.
(nat_clock_t): Remove attribute __aligned__.
(struct nat_timeval): Delete.
(nat_siginfo_t): Remove attribute __aligned__.
(ptrace_siginfo_t): Define.
(compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
(compat_x32_siginfo_from_siginfo)
(siginfo_from_compat_x32_siginfo): Make 'from' parameter const.
Convert through a ptrace_siginfo_t instead of a nat_siginfo_t.
Remove casts.
(amd64_linux_siginfo_fixup_common): Rename 'native' parameter to
'ptrace'. Remove static assertions.
(top level): New static assertions.
gdb/gdbserver/ChangeLog:
2016-07-26 Pedro Alves <palves@redhat.com>
* linux-x86-low.c (x86_siginfo_fixup): Rename 'native' parameter
to 'ptrace'.
GDBserver with software single step should be able to claim supporting
vCont s and S actions, so that GDB knows the remote target can do
single step. It doesn't matter to GDB that the single step in the
remote target is done via hardware or software.
gdb/gdbserver:
2016-07-21 Yao Qi <yao.qi@linaro.org>
* server.c (handle_v_requests): Support s and S actions
if target_supports_software_single_step return true.
This patch is to teach GDBserver using software single step to handle
vCont;s. Simply speaking, if the thread's resume request is resume_step,
install reinsert breakpoint at the next pcs when GDBserver is about to
resume threads. These reinsert breakpoints of a thread are removed,
when GDBserver gets an event from that thread and reports it back to
GDB.
gdb/gdbserver:
2016-07-21 Yao Qi <yao.qi@linaro.org>
* linux-low.c (resume_stopped_resumed_lwps): If resume request
is resume_step, call maybe_hw_step.
(linux_wait_1): Stop all threads, remove reinsert breakpoints,
and unstop them.
(linux_resume_one_lwp_throw): Don't assert the thread has reinsert
breakpoints or not.
(proceed_one_lwp): If resume request is resume_step, install
reinsert breakpoints and call maybe_hw_step.
Nowadays, we only enqueue signal when we leave thread pending in
linux_resume_one_thread. If lwp->resume->sig isn't zero (GDB wants
to resume with signal), we pass lwp->resume->sig to
linux_resume_one_lwp.
In order to reduce the difference between resuming thread with signal
and proceeding thread with signal, when we resume thread, we can
enqueue signal too, and proceed thread. The signal will be consumed in
linux_resume_one_lwp_throw from lwp->pending_signals.
gdb/gdbserver:
2016-07-21 Yao Qi <yao.qi@linaro.org>
* linux-low.c (proceed_one_lwp): Declare.
(linux_resume_one_thread): Remove local variable 'step'.
Lift code enqueue signal. Call proceed_one_lwp instead of
linux_resume_one_lwp.
install_software_single_step_breakpoints has parameter lwp, but still
need to switch to current_thread. In order to simplify its caller,
we do the current_thread save/restore inside install_software_single_step_breakpoints.
gdb/gdbserver:
2016-07-21 Yao Qi <yao.qi@linaro.org>
* gdbthread.h (make_cleanup_restore_current_thread): Declare.
* inferiors.c (do_restore_current_thread_cleanup): New function.
(make_cleanup_restore_current_thread): Likewise.
* linux-low.c (install_software_single_step_breakpoints): Call
make_cleanup_restore_current_thread. Switch current_thread to
thread.
This patch makes reinsert_breakpoint thread specific, which means we
insert and remove reinsert_breakpoint breakpoints for a specific
thread. This motivation of this change is that I'll use
reinsert_breakpoint for vCont;s on software single step target, so that
GDBserver may insert one reinsert_breakpoint for one thread doing
step-over, and insert one reinsert_breakpoint for another thread doing
vCont;s. After the operation of one thread is finished, GDBserver must
remove reinsert_breakpoint for that thread only.
On the other hand, reinsert_breakpoint is used for step-over nowadays.
GDBserver inserts reinsert_breakpoint, and wait only from the thread
doing step-over. After the step-over is done, GDBserver removes the
reinsert_breakpoint. If there is still any threads need step-over, do
the same again until all threads are finished step-over. In other words,
reinsert_breakpoint is globally thread specific, but in an implicit way.
It is natural to make it explicitly thread specific.
gdb/gdbserver:
2016-07-21 Yao Qi <yao.qi@linaro.org>
* mem-break.c (struct reinsert_breakpoint) <ptid>: New field.
(set_reinsert_breakpoint): New parameter ptid. Callers updated.
(clone_one_breakpoint): Likewise.
(delete_reinsert_breakpoints): Change parameter to thread.
Callers updated.
(has_reinsert_breakpoints): Likewise.
(uninsert_reinsert_breakpoints): Likewise.
(reinsert_reinsert_breakpoints): Likewise.
* mem-break.h (set_reinsert_breakpoint): Update declaration.
(delete_reinsert_breakpoints): Likewise.
(reinsert_reinsert_breakpoints): Likewise.
(uninsert_reinsert_breakpoints): Likewise.
(has_reinsert_breakpoints): Likewise.
This patch is to change the interface of clone_all_breakpoints, from
lists of breakpoints and raw_breakpoints to child thread and parent
thread. I choose child thread to pass because we need the ptid of
the child thread in the following patch.
gdb/gdbserver:
2016-07-21 Yao Qi <yao.qi@linaro.org>
* inferiors.c (get_thread_process): Make parameter const.
* inferiors.h (get_thread_process): Update declaration.
* mem-break.c (clone_all_breakpoints): Remove all parameters.
Add new parameters child_thread and parent_thread. Callers
updated.
* mem-break.h (clone_all_breakpoints): Update declaration.
Nowadays, there are three types of breakpoint in GDBserver,
- gdb breakpoints,
- reinsert breakpoints, used for software single step,
- other breakpoints, used for tracepoint,
but we only have one 'struct breakpoint' for all of them. Some fields
are only useful to one type of breakpoint. For example, cond_list
and command_list are only used by gdb breakpoints, while handler is
only used by other breakpoints.
This patch changes 'struct breakpoint' to a base class, which has fields
needed by all breakpoint types, also add three sub-classes to
'struct breakpoint' to these three types of breakpoints.
gdb/gdbserver:
2016-07-21 Yao Qi <yao.qi@linaro.org>
* mem-break.c (struct breakpoint) <cond_list>: Remove.
<command_list, handler>: Remove.
(struct gdb_breakpoint): New.
(struct other_breakpoint): New.
(struct reinsert_breakpoint): New.
(is_gdb_breakpoint): New function.
(any_persistent_commands): Update command_list if
is_gdb_breakpoint returns true.
(set_breakpoint): Create breakpoints according to their types.
(find_gdb_breakpoint): Return 'struct gdb_breakpoint *'.
(set_gdb_breakpoint_1): Likewise.
(set_gdb_breakpoint): Likewise.
(clear_breakpoint_conditions): Change parameter type to
'struct gdb_breakpoint *'.
(clear_breakpoint_commands): Likewise.
(clear_breakpoint_conditions_and_commands): Likewise.
(add_condition_to_breakpoint): Likewise.
(add_breakpoint_condition): Likewise.
(add_commands_to_breakpoint): Likewise.
(check_breakpoints): Check other_breakpoint.
(clone_one_breakpoint): Clone breakpopint according to its type.
* mem-break.h (struct gdb_breakpoint): Declare.
(set_gdb_breakpoint): Update declaration.
(clear_breakpoint_conditions_and_commands): Likewise.
(add_breakpoint_condition): Likewise.
(add_breakpoint_commands): Likewise.
* server.c (process_point_options): Change parameter type to
'struct gdb_breakpoint *'.
Nowadays, set_breakpoint_at creates breakpoint of type
other_breakpoint, but we also use set_breakpoint_at
in set_reinsert_breakpoint to create breakpoint, so that
we have to overwrite the breakpoint type like this,
bp = set_breakpoint_at (stop_at, NULL);
bp->type = reinsert_breakpoint;
which looks not very good. This patch changes set_breakpoint_at
to receive breakpoint type. Since set_breakpoint_at is
used in many places, I rename it to set_breakpoint_type_at, and wrap
it with set_breakpoint_at, and pass other_breakpoint. In this way,
we can call set_breakpoint_type_at with reinsert_breakpoint in
set_reinsert_breakpoint too, and code looks cleaner.
gdb/gdbserver:
2016-07-21 Yao Qi <yao.qi@linaro.org>
* mem-break.c (set_breakpoint_at): Rename it to ...
(set_breakpoint_type_at): ... it.
(set_breakpoint_at): Call set_breakpoint_type_at.
(set_reinsert_breakpoint): Call set_breakpoint_type_at.
* mem-break.h (set_breakpoint_at): Update comments.
This commit fixes detaching on Linux when some thread exits the whole
thread group (process) just while we're detaching.
On Linux, a ptracer must detach from each LWP individually, with
PTRACE_DETACH. Since PTRACE_DETACH sets the thread running free, if
one of the already-detached threads causes the whole thread group to
exit (e.g., simply calls exit), the kernel force-kills the other
threads in the group, making them zombie, just as we're still
detaching them. Since PTRACE_DETACH against a zombie thread fails
with ESRCH, and gdb/gdbserver are not expecting this, the detach fails
with an error like: "Can't detach process: No such process.".
This patch detects this detach failure as normal, and instead of
erroring out, reaps the now-dead thread.
New test included, that exercises several different scenarios that
cause GDB/GDBserver to error out when it should not.
Tested on x86-64 GNU/Linux with {unix, native-gdbserver,
native-extended-gdbserver}
Note: without the previous fix, the "single-process + continue"
variant of the new test would fail with:
(gdb) PASS: gdb.threads/process-dies-while-detaching.exp: single-process: continue: watchpoint: switch to parent
continue
Continuing.
Warning:
Could not insert hardware watchpoint 3.
Could not insert hardware breakpoints:
You may have requested too many hardware breakpoints/watchpoints.
Command aborted.
(gdb) FAIL: gdb.threads/process-dies-while-detaching.exp: single-process: continue: watchpoint: continue
gdb/gdbserver/ChangeLog:
2016-07-01 Pedro Alves <palves@redhat.com>
Antoine Tremblay <antoine.tremblay@ericsson.com>
* linux-low.c: Change interface to take the target lwp_info
pointer directly and return void. Handle detaching from a zombie
thread.
(linux_detach_lwp_callback): New function.
(linux_detach): Detach from the leader thread after detaching from
the clone threads.
gdb/ChangeLog:
2016-07-01 Pedro Alves <palves@redhat.com>
Antoine Tremblay <antoine.tremblay@ericsson.com>
* inf-ptrace.c (inf_ptrace_detach_success): New function, factored
out from ...
(inf_ptrace_detach): ... here.
* inf-ptrace.h (inf_ptrace_detach_success): New declaration.
* linux-nat.c (get_pending_status): Rename to ...
(get_detach_signal): ... this, and return a host signal instead of
filling in a wait status.
(detach_one_lwp): New function, factored out from detach_callback
and adjusted to handle detaching from a zombie thread.
(detach_callback): Skip the leader thread.
(linux_nat_detach): No longer defer to inf_ptrace_detach to detach
the leader thread, nor build a signal string to pass down.
Instead, use target_announce_detach, detach_one_lwp and
inf_ptrace_detach_success.
gdb/testsuite/ChangeLog:
2016-07-01 Pedro Alves <palves@redhat.com>
Antoine Tremblay <antoine.tremblay@ericsson.com>
* gdb.threads/process-dies-while-detaching.c: New file.
* gdb.threads/process-dies-while-detaching.exp: New file.
In AArch64 displaced stepping and fast tracepoint, GDB/GDBserver needs
to check whether the offset can fit in the range. We are using int32_t
for offset, it is sufficient to get an offset from an instruction, but
it is not enough to get an offset from two addresses. For example,
we have a BL in shared lib which is at 0x0000002000040774, and the
scratch pad for displaced stepping is at 0x400698. The offset can't
fit in 28 bit imm. However, since we are using int32_t for offset, GDB
thinks the offset can fit it, and generate the B instruction with wrong
offset.
It fixes the following fail,
-FAIL: gdb.base/dso2dso.exp: next over call to sub2
gdb:
2016-06-28 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_displaced_step_b): Use int64_t for
variable new_offset.
gdb/gdbserver:
2016-06-28 Yao Qi <yao.qi@linaro.org>
* linux-aarch64-low.c (aarch64_ftrace_insn_reloc_b): Use int64_t
for variable new_offset.
(aarch64_ftrace_insn_reloc_b_cond): Likewise.
(aarch64_ftrace_insn_reloc_cb): Likewise.
(aarch64_ftrace_insn_reloc_tb): Likewise.
(aarch64_install_fast_tracepoint_jump_pad): Likewise. Use
PRIx64 instead of PRIx32.
When I implement linux_target_ops.get_syscall_trapinfo for aarch64 and arm,
I find the second parameter sysret isn't used at all. In RSP, we don't
need syscall return value either, because GDB can figure out the return
value from registers content got by 'g' packet.
This patch is to remove them.
gdb/gdbserver:
2016-06-28 Yao Qi <yao.qi@linaro.org>
* linux-low.c (get_syscall_trapinfo): Remove parameter sysret.
Callers updated.
* linux-low.h (struct linux_target_ops) <get_syscall_trapinfo>:
Remove parameter sysno.
* linux-x86-low.c (x86_get_syscall_trapinfo): Remove parameter
sysret.
When a thread is doing step-over with reinsert breakpoint, and the
instruction executed is a syscall doing vfork, both parent and child
share the memory, so the reinsert breakpoint in the space is visible
to both of them. Also, removing the reinsert breakpoints from the
child will effectively remove them from the parent. We should
carefully manipulate reinsert breakpoints for both processes.
What we are doing here is that
- uninsert reinsert breakpoints from the parent before cloning the
breakpoint list. We use "uninsert" instead of "remove", because
we need to "reinsert" them back after vfork is done. In fact,
"uninsert" removes them from both child and parent process space.
- reinsert breakpoints in parent process are still copied to child's
breakpoint list,
- remove them from child's breakpoint list as what we did for fork,
at this point, reinsert breakpoints are removed from the child and
the parent, but they are still tracked by the parent's breakpoint
list,
- once vfork is done, "reinsert" them back to the parent,
gdb/gdbserver:
2016-06-17 Yao Qi <yao.qi@linaro.org>
* linux-low.c (handle_extended_wait): Call
uninsert_reinsert_breakpoints for the parent process. Remove
reinsert breakpoints from the child process. Reinsert them to
the parent process when vfork is done.
* mem-break.c (uninsert_reinsert_breakpoints): New function.
(reinsert_reinsert_breakpoints): New function.
* mem-break.h (uninsert_reinsert_breakpoints): Declare
(reinsert_reinsert_breakpoints): Declare.
When a thread is stepping over a syscall instruction with software
single step, GDBserver inserts reinsert breakpoints at the next pcs.
If the syscall call is fork, the forked child has reinsert breakpoint
in its space, and GDBserver clones parent's breakpoint list to child's.
When GDBserver resumes the child, its bp_reinsert is zero, but has
reinsert breakpoints, so the following assert is triggered if I apply
the patch extending step-over-syscall.exp.
gdb/gdbserver/linux-low.c:4292: A problem internal to GDBserver has been detected.^M
void linux_resume_one_lwp_throw(lwp_info*, int, int, siginfo_t*): Assertion `!has_reinsert_breakpoints (proc)' failed.
gdb/gdbserver:
2016-06-17 Yao Qi <yao.qi@linaro.org>
* linux-low.c (handle_extended_wait): If the parent is doing
step-over, remove the reinsert breakpoints from the forked child.
This patch fixes a GDBserver crash when one thread is stepping over
a syscall instruction which is exit. Step-over isn't finished due
to the exit, but GDBserver doesn't clean up the state of step-over,
so in the wait next time, GDBserver will wait on step_over_bkpt,
which is already exited, and GDBserver crashes because
'requested_child' is NULL. See gdbserver logs below,
Need step over [LWP 14858]? yes, found breakpoint at 0x2aaaaad91307^M
proceed_all_lwps: found thread 14858 needing a step-over^M
Starting step-over on LWP 14858. Stopping all threads^M
>>>> entering void stop_all_lwps(int, lwp_info*)
....
<<<< exiting void stop_all_lwps(int, lwp_info*)^M
Done stopping all threads for step-over.^M
pc is 0x2aaaaad91307^M
Writing 0f to 0x2aaaaad91307 in process 14858^M
Could not find fast tracepoint jump at 0x2aaaaad91307 in list (uninserting).^M
pending reinsert at 0x2aaaaad91307^M
step from pc 0x2aaaaad91307^M
Resuming lwp 14858 (step, signal 0, stop not expected)^M
# Start step-over for LWP 14858
>>>> entering ptid_t linux_wait_1(ptid_t, target_waitstatus*, int)
....
LLFE: 14858 exited.
...
<<<< exiting ptid_t linux_wait_1(ptid_t, target_waitstatus*, int)
# LWP 14858 exited
.....
>>>> entering ptid_t linux_wait_1(ptid_t, target_waitstatus*, int)^M
linux_wait_1: [<all threads>]^M
step_over_bkpt set [LWP 14858.14858], doing a blocking wait
# but step_over_bkpt is still LWP 14858, which is wrong
The fix is to finish step-over if it is ongoing, and unsuspend other
threads. Without the fix in linux-low.c, GDBserver will crash in
with running gdb.base/step-over-exit.exp.
gdb/gdbserver:
2016-06-17 Yao Qi <yao.qi@linaro.org>
* linux-low.c (unsuspend_all_lwps): Declare.
(linux_low_filter_event): If thread exited, call finish_step_over.
If step-over is finished, unsuspend other threads.
gdb/testsuite:
2016-06-17 Yao Qi <yao.qi@linaro.org>
* gdb.base/step-over-exit.c: New.
* gdb.base/step-over-exit.exp: New.
This patch adds more asserts, so the incorrect or sub-optimal
reinsert breakpoints manipulations (from the tests in the following
patches) can trigger them.
gdb/gdbserver:
2016-06-17 Yao Qi <yao.qi@linaro.org>
* linux-low.c (linux_resume_one_lwp_throw): Assert
has_reinsert_breakpoints returns false.
* mem-break.c (delete_disabled_breakpoints): Assert
bp type isn't reinsert_breakpoint.
This patch adds some sanity check that reinsert breakpoints must be
there when doing step-over on software single step target. The check
triggers an assert when running forking-threads-plus-breakpoint.exp
on arm-linux target,
gdb/gdbserver/linux-low.c:4714: A problem internal to GDBserver has been detected.^M
int finish_step_over(lwp_info*): Assertion `has_reinsert_breakpoints ()' failed.
the error happens when GDBserver has already resumed a thread of
process A for step-over (and wait for it hitting reinsert breakpoint),
but receives detach request for process B from GDB, which is shown in
the backtrace below,
(gdb) bt
#2 0x000228aa in finish_step_over (lwp=0x12bbd98) at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/linux-low.c:4703
#3 0x00025a50 in finish_step_over (lwp=0x12bbd98) at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/linux-low.c:4749
#4 complete_ongoing_step_over () at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/linux-low.c:4760
#5 linux_detach (pid=25228) at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/linux-low.c:1503
#6 0x00012bae in process_serial_event () at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/server.c:3974
#7 handle_serial_event (err=<optimized out>, client_data=<optimized out>) at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/server.c:4347
#8 0x00016d68 in handle_file_event (event_file_desc=<optimized out>) at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/event-loop.c:429
#9 0x000173ea in process_event () at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/event-loop.c:184
#10 start_event_loop () at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/event-loop.c:547
#11 0x0000aa2c in captured_main (argv=<optimized out>, argc=<optimized out>) at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/server.c:3719
#12 main (argc=<optimized out>, argv=<optimized out>) at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/server.c:3804
the sanity check tries to find the reinsert breakpoint from process B,
but nothing is found. It is wrong, we need to search in process A,
since we started step-over of a thread of process A.
(gdb) p lwp->thread->entry.id
$3 = {pid = 25120, lwp = 25131, tid = 0}
(gdb) p current_thread->entry.id
$4 = {pid = 25228, lwp = 25228, tid = 0}
This patch switched current_thread to the thread we are doing step-over
in finish_step_over.
gdb/gdbserver:
2016-06-17 Yao Qi <yao.qi@linaro.org>
* linux-low.c (maybe_hw_step): New function.
(linux_resume_one_lwp_throw): Call maybe_hw_step.
(finish_step_over): Switch current_thread to lwp temporarily,
and assert has_reinsert_breakpoints returns true.
(proceed_one_lwp): Call maybe_hw_step.
* mem-break.c (has_reinsert_breakpoints): New function.
* mem-break.h (has_reinsert_breakpoints): Declare.
gdb/ChangeLog:
2016-06-02 Jon Turney <jon.turney@dronecode.org.uk>
* windows-nat.c (handle_output_debug_string): Return type of
gdb_signal_from_host() is gdb_signal, not an int.
(windows_get_exec_module_filename): Add pointer casts for C++.
gdb/gdbserver/ChangeLog:
2016-06-02 Jon Turney <jon.turney@dronecode.org.uk>
* win32-low.c (win32_create_inferior): Add pointer casts for C++.
This patch is to replace find_inferior (&all_threads, unsuspend_one_lwp, NULL)
with unsuspend_all_lwps (NULL), which is shorter. They are equivalent
to each other.
gdb/gdbserver:
2016-05-17 Yao Qi <yao.qi@linaro.org>
* linux-low.c (linux_stabilize_threads): Call unsuspend_all_lwps
instead of find_inferior.
This patch initialize res to zero, otherwise, it may have some garbage
bits after the *the_target->read_memory call.
gdb/gdbserver:
2016-05-05 Yao Qi <yao.qi@linaro.org>
* linux-arm-low.c (get_next_pcs_read_memory_unsigned_integer):
Initialize res to zero.
Variable cpsr holds the value of cpsr register, which is 32-bit. It
is better to explicitly use uint32_t.
gdb/gdbserver:
2016-05-05 Yao Qi <yao.qi@linaro.org>
* linux-arm-low.c (arm_sigreturn_next_pc): Change type of cpsr
to uint32_t.
ChangeLog:
* spu-linux-nat.c (spu_bfd_iovec_pread): Add pointer cast for C++.
(spu_bfd_open): Likewise.
gdbserver/ChangeLog:
* spu-low.c (fetch_ppc_register): Cast PowerPC-Linux-specific value
used as first ptrace argument to PTRACE_TYPE_ARG1 for C++.
(fetch_ppc_memory_1, store_ppc_memory_1): Likewise.
I am sending this fix on behalf of Par Olsson, as a follow-up of this
one:
https://www.sourceware.org/ml/gdb-patches/2015-10/msg00196.html
This problem is exposed when enabling/disabling fast tracepoints on big
endian machines. The flag is defined as an int8_t, but is written from
gdbserver as an integer (usually 32 bits). When the agent code reads it
as an int8_t, it only considers the most significant byte, which is
always 0.
Also, we were writing 32 bits in an 8 bits field, so the write would
overflow, but since the following bytes are padding (the next field is
an uint64_t), it luckily didn't cause any issue on little endian
systems.
The fix was originally tested on ARM big endian systems, but I don't
have access to such a system. However, thanks to Marcin's PowerPC fast
tracepoint patches and gcc110 (big endian Power7) on the gcc compile
farm, I was able to reproduce the problem, test the fix and write a
test (the following patch).
gdb/gdbserver/ChangeLog:
YYYY-MM-DD Par Olsson <par.olsson@windriver.com>
* tracepoint.c (write_inferior_int8): New function.
(cmd_qtenable_disable): Write enable flag using
write_inferior_int8.
Hi,
I happen to see that field need_step_over in struct lwp_info is only
used to print a debug info. need_step_over is set in linux_wait_1
when breakpoint_here is true, however, we check breakpoint_here too in
need_step_over_p and do the step over. I think we don't need field
need_step_over, and check breakpoint_here directly in need_step_over_p.
This field was added in this patch
https://sourceware.org/ml/gdb-patches/2010-03/msg00605.html and the code
wasn't changed much since then.
This patch is to remove it.
gdb/gdbserver:
2016-04-28 Yao Qi <yao.qi@linaro.org>
* linux-low.h (struct lwp_info) <need_step_over>: Remove.
* linux-low.c (linux_wait_1): Update.
(need_step_over_p): Likewise.
When GDBserver steps over a breakpoint using software single step, it
enqueues the signal, single step and deliver the signal in the next
resume if step over is not needed. In this way, the program won't
receive the signal if the conditional breakpoint is set a branch to
self instruction, because the step over is always needed.
This patch removes the restriction that don't deliver the signal to
the inferior if we are trying to reinsert a breakpoint for software
single step and change the decision on resume vs. step-over when the
LWP has pending signals to deliver.
gdb/gdbserver:
2016-04-25 Yao Qi <yao.qi@linaro.org>
* linux-low.c (lwp_signal_can_be_delivered): Adjust.
(need_step_over_p): Return zero if the LWP has pending signals
can be delivered on software single step target.
GDBserver steps over a breakpoint while the single step breakpoint
is inserted at the same address, there are two breakpoint objects
using single raw breakpoint, which is inserted (for single step).
When step over is finished, GDBserver reinsert the breakpoint, but
it finds the raw breakpoint is already inserted, and error out
"Breakpoint already inserted at reinsert time." Even if I change the
order to delete reinsert breakpoints first (which only decreases the
refcount, but leave inserted flag unchanged), the error is still
there.
The fix is to remove the error and return instead.
gdb/gdbserver:
2016-04-25 Yao Qi <yao.qi@linaro.org>
* linux-low.c (reinsert_raw_breakpoint): If bp->inserted is true
return instead of error.
When GDBserver inserts a breakpoint, it looks for raw breakpoint, if
the raw breakpoint is found, increase its refcount, and return. This
doesn't work when it steps over a breakpoint using software single
step and the underneath instruction of breakpoint is branch to self.
When stepping over a breakpoint on ADDR using software single step,
GDBserver uninsert the breakpoint, so the corresponding raw breakpoint
RAW's 'inserted' flag is zero. Then, GDBserver insert single step
breakpoint at the same address ADDR because the instruction is branch
to self, the same raw brekapoint RAW is found, and increase the
refcount. However, the raw breakpoint is not inserted, and the
program won't stop.
gdb/gdbserver:
2016-04-25 Pedro Alves <palves@redhat.com>
Yao Qi <yao.qi@linaro.org>
* mem-break.c (set_raw_breakpoint_at): Create a raw breakpoint
object. Insert it if it is not inserted yet. Increase the
refcount and link it into the proc's raw breakpoint list.
Bits 20 ~ 23 of CPSR are reserved (RAZ, read as zero), but they are not
zero if the arm program runs on aarch64-linux. AArch64 tracer gets PSTATE
from arm 32-bit tracee as CPSR, but bits 20 ~ 23 are used in PSTATE. I
think kernel should clear these bits when it is read through ptrace, but
the fix in user space is still needed.
This patch fixes these two fails,
-FAIL: gdb.reverse/insn-reverse.exp: ext_reg_push_pop: compare registers on insn 0:vldr d7, [r11, #-12]
-FAIL: gdb.reverse/insn-reverse.exp: ext_reg_push_pop: compare registers on insn 0:vldr d7, [r7]
gdb:
2016-04-22 Yao Qi <yao.qi@linaro.org>
* aarch32-linux-nat.c (aarch32_gp_regcache_supply): Clear CPSR
bits 20 to 23.
gdb/gdbserver:
2016-04-22 Yao Qi <yao.qi@linaro.org>
* linux-aarch32-low.c (arm_store_gregset): Clear CPSR bits 20
to 23.
Simple exchange of mpx-avx for avx-mpx.
Other occurrences were not found.
2016-04-22 Walfred Tedeschi <walfred.tedeschi@intel.com>
gdb/gdbserver/ChangeLog:
* configure.srv (srv_amd64_xmlfiles): Exchange
i386/amd64-mpx-avx.xml for i386/amd64-avx-mpx.xml.
GDBserver doesn't deliver signal when stepping over a breakpoint even
hardware single step is used. When GDBserver started to step over
(thread creation) breakpoint for mutlit-threaded debugging in 2002 [1],
GDBserver behaves this way.
This behavior gets trouble on conditional breakpoints on branch to
self instruction like this,
0x00000000004005b6 <+29>: jmp 0x4005b6 <main+29>
and I set breakpoint
$(gdb) break branch-to-self.c:43 if counter > 3
and the variable counter will be set to 5 in SIGALRM signal handler.
Since GDBserver keeps stepping over breakpoint, the SIGALRM can never
be dequeued and delivered to the inferior, so the program can't stop.
The test can be found in gdb.base/branch-to-self.exp.
GDBserver didn't deliver signal when stepping over a breakpoint because
a tracepoint is collected twice if GDBserver does so in the following
scenario, which can be reproduced by gdb.trace/signal.exp.
- program stops at tracepoint, and tracepoint is collected,
- gdbserver starts a step-over,
- a signal arrives, step-over is canceled, and signal should be passed,
- gdbserver starts a new step-over again, pass the signal as well,
- program stops at the entry of signal handler, step-over finished,
- gdbserver proceeds,
- program returns from the signal handler, again to the tracepoint,
and thus is collected again.
The spurious collection isn't that harmful, IMO, so it should be OK
to let GDBserver deliver signal when stepping over a breakpoint.
gdb/gdbserver:
2016-04-22 Yao Qi <yao.qi@linaro.org>
* linux-low.c (lwp_signal_can_be_delivered): Don't deliver
signal when stepping over breakpoint with software single
step.
gdb/testsuite:
2016-04-22 Yao Qi <yao.qi@linaro.org>
* gdb.trace/signal.exp: Also pass if
$tracepoint_hits($i) > $iterations.
Now that gdb/gdbserver compile as C++ programs by default, the s390
GNU/Linux build started failing with:
In file included from ../../src/gdb/common/common-defs.h:64:0,
from ../../src/gdb/defs.h:28,
from ../../src/gdb/s390-linux-nat.c:22:
../../src/gdb/s390-linux-nat.c: In function ‘void fetch_regset(regcache*, int, int, int, const regset*)’:
../../src/gdb/../include/libiberty.h:711:38: error: invalid conversion from ‘void*’ to ‘gdb_byte* {aka unsigned char*}’ [-fpermissive]
# define alloca(x) __builtin_alloca(x)
^
../../src/gdb/s390-linux-nat.c:297:19: note: in expansion of macro ‘alloca’
gdb_byte *buf = alloca (regsize);
^
etc.
gdb/ChangeLog:
2016-04-21 Pedro Alves <palves@redhat.com>
* s390-linux-nat.c (fetch_regset, store_regset, check_regset): Use
void * instead of gdb_byte *.
gdb/gdbserver/ChangeLog:
2016-04-21 Pedro Alves <palves@redhat.com>
* linux-s390-low.c (s390_collect_ptrace_register)
(s390_supply_ptrace_register, s390_get_hwcap): Use gdb_byte * and
add casts.
(s390_check_regset): Use void * instead of gdb_byte *.
This makes --enable-build-with-cxx be "yes" by default.
One must now configure with --enable-build-with-cxx=no in order to
build with a C compiler.
gdb/ChangeLog:
2016-04-20 Pedro Alves <palves@redhat.com>
* build-with-cxx.m4 (GDB_AC_BUILD_WITH_CXX): Default to yes.
* configure: Renegerate.
gdb/gdbserver/ChangeLog:
2016-04-20 Pedro Alves <palves@redhat.com>
* configure: Renegerate.
This patch moves macro ARM_CPSR_GREGNUM to arch/arm-linux.h so that it
can be used in GDBserver side.
gdb:
2016-04-20 Yao Qi <yao.qi@linaro.org>
* arm-linux-tdep.h (ARM_CPSR_GREGNUM): Move it to ...
* arch/arm-linux.h: ... here.
gdb/gdbserver:
2016-04-20 Yao Qi <yao.qi@linaro.org>
* linux-aarch32-low.c: Include "arch/arm-linux.h".
(arm_fill_gregset): Use ARM_CPSR_GREGNUM rather than magic
number 16.
(arm_store_gregset): Likewise.
The current MPX target descriptions assume that MPX is always combined
with AVX, however that's not correct. We can have machines with MPX
and without AVX; or machines with AVX and without MPX.
This patch adds new target descriptions for machines that support
both MPX and AVX, as duplicates of the existing MPX descriptions.
The following commit will remove AVX from the MPX-only descriptions.
2016-04-16 Walfred Tedeschi <walfred.tedeschi@intel.com>
gdb/ChangeLog:
* amd64-linux-tdep.c (features/i386/amd64-avx-mpx-linux.c):
New include.
(amd64_linux_core_read_description): Add case for
X86_XSTATE_AVX_MPX_MASK.
(_initialize_amd64_linux_tdep): Call initialize_tdesc_amd64_avx_mpx_linux.
* amd64-linux-tdep.h (tdesc_amd64_avx_mpx_linux): New definition.
* amd64-tdep.c (features/i386/amd64-avx-mpx.c): New include.
(amd64_target_description): Add case for X86_XSTATE_AVX_MPX_MASK.
(_initialize_amd64_tdep): Call initialize_tdesc_amd64_avx_mpx.
* common/x86-xstate.h (X86_XSTATE_MPX_MASK): Remove AVX bits.
(X86_XSTATE_AVX_MPX_MASK): New case.
* features/Makefile (i386/i386-avx-mpx, i386/i386-avx-mpx-linux)
(i386/amd64-avx-mpx, i386/amd64-avx-mpx-linux): New rules.
(i386/i386-avx-mpx-expedite, i386/i386-avx-mpx-linux-expedite)
(i386/amd64-avx-mpx-expedite, i386/amd64-avx-mpx-linux-expedite):
New expedites.
* i386-linux-tdep.c (features/i386/i386-avx-mpx-linux.c): New
include.
(i386_linux_core_read_description): Add case
X86_XSTATE_AVX_MPX_MASK.
(_initialize_i386_linux_tdep): Call
initialize_tdesc_i386_avx_mpx_linux.
* i386-linux-tdep.h (tdesc_i386_avx_mpx_linux): New include.
* i386-tdep.c (features/i386/i386-avx-mpx.c): New include.
(i386_target_description): Add case for X86_XSTATE_AVX_MPX_MASK.
* x86-linux-nat.c (x86_linux_read_description): Add case for
X86_XSTATE_AVX_MPX_MASK.
* features/i386/amd64-avx-mpx-linux.xml: New file.
* features/i386/i386-avx-mpx-linux.xml: New file.
* features/i386/i386-avx-mpx.xml: New file.
* features/i386/amd64-avx-mpx.xml: New file.
* features/i386/amd64-avx-mpx-linux.c: Generated.
* features/i386/amd64-avx-mpx.c: Generated.
* features/i386/i386-avx-mpx-linux.c: Generated.
* features/i386/i386-avx-mpx.c: Generated.
* regformats/i386/amd64-avx-mpx-linux.dat: Generated.
* regformats/i386/amd64-avx-mpx.dat: Generated.
* regformats/i386/i386-avx-mpx-linux.dat: Generated.
* regformats/i386/i386-avx-mpx.dat: Generated.
gdb/gdbserver/ChangeLog:
* Makefile.in (clean): Add removal for i386-avx-mpx.c,
i386-avx-mpx-linux.c, amd64-avx-mpx.c and amd64-avx-mpx-linux.c.
(i386-avx-mpx.c, i386-avx-mpx-linux.c, amd64-avx-mpx.c)
(amd64-avx-mpx-linux.c): New rules.
(amd64-avx-mpx-linux-ipa.o, i386-avx-mpx-linux-ipa.o): New rule.
* configure.srv (srv_i386_regobj): Add i386-avx-mpx.o.
(srv_i386_linux_regobj): Add i386-avx-mpx-linux.o.
(srv_amd64_regobj): Add amd64-avx-mpx.o.
(srv_amd64_linux_regobj): Add amd64-avx-mpx-linux.o.
(srv_i386_xmlfiles): Add i386/i386-avx-mpx.xml.
(srv_amd64_xmlfiles): Add i386/amd64-avx-mpx.xml.
(srv_i386_linux_xmlfiles): Add i386/i386-avx-mpx-linux.xml.
(srv_amd64_linux_xmlfiles): Add i386/amd64-avx-mpx-linux.xml.
(ipa_i386_linux_regobj): Add i386-avx-mpx-linux-ipa.o.
(ipa_amd64_linux_regobj): Add amd64-avx-mpx-linux-ipa.o.
* linux-x86-low.c (x86_linux_read_description): Add case for
X86_XSTATE_AVX_MPX_MASK.
(x86_get_ipa_tdesc_idx): Add cases for avx_mpx.
(initialize_low_arch): Call init_registers_amd64_avx_mpx_linux and
init_registers_i386_avx_mpx_linux.
* linux-i386-ipa.c (get_ipa_tdesc): Add case for avx_mpx.
(initialize_low_tracepoint): Call
init_registers_i386_avx_mpx_linux.
* linux-amd64-ipa.c (get_ipa_tdesc): Add case for avx_mpx.
(initialize_low_tracepoint): Call
init_registers_amd64_avx_mpx_linux.
* linux-x86-tdesc.h (X86_TDESC_AVX_MPX): New enum value.
(init_registers_amd64_avx_mpx_linux, tdesc_amd64_avx_mpx_linux)
(init_registers_i386_avx_mpx_linux, tdesc_i386_avx_mpx_linux): New
declarations.
The ptrace args/return types detection doesn't work properly in C++
mode, on non-GNU/Linux hosts. For example, on gcc70 (NetBSD 5.1),
where the prototype is:
int ptrace(int, __pid_t, void*, int);
configure misdetects it as:
$ grep PTRACE_TYPE config.h
#define PTRACE_TYPE_ARG1 int
#define PTRACE_TYPE_ARG3 int *
#define PTRACE_TYPE_ARG4 int
/* #undef PTRACE_TYPE_ARG5 */
#define PTRACE_TYPE_RET int
resulting in:
../../src/gdb/amd64bsd-nat.c: In function 'void amd64bsd_fetch_inferior_registers(target_ops*, regcache*, int)':
../../src/gdb/amd64bsd-nat.c:56: warning: dereferencing type-punned pointer will break strict-aliasing rules
../../src/gdb/amd64bsd-nat.c: In function 'void amd64bsd_store_inferior_registers(target_ops*, regcache*, int)':
../../src/gdb/amd64bsd-nat.c:104: warning: dereferencing type-punned pointer will break strict-aliasing rules
../../src/gdb/amd64bsd-nat.c:110: warning: dereferencing type-punned pointer will break strict-aliasing rules
We could address this [1], however despite ptrace.m4's claim:
# Needs to be tested in C++ mode, to detect whether we need to cast
# the first argument to enum __ptrace_request.
it appears that there's actually no need to test in C++ mode. Always
running the ptrace tests in C mode works just the same on GNU/Linux.
I remember experimenting with several different ways to handle the
original issue back then, and maybe that was needed in some other
attempt and then I didn't realize it ended up not really necessary.
Confirmed that this fixes the NetBSD 5.1 C++ build, and confirmed that
C and C++ builds on Fedora 23 are unaffected.
[1] - https://sourceware.org/ml/gdb-patches/2016-04/msg00374.html
gdb/ChangeLog:
2016-04-18 Pedro Alves <palves@redhat.com>
* ptrace.m4 (GDB_AC_PTRACE): Don't run tests in C++ mode.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2016-04-18 Pedro Alves <palves@redhat.com>
* configure: Regenerate.
This patch fixes the following failure:
FAIL: gdb.trace/trace-condition.exp: ftrace: -(21 << 1) == -42: check 10
frames were collected.
This was due to aarch64_emit_sub using the wrong order in its operands, so the
operation would end up being 42 - 0 rather than 0 - 42.
This patch also fixes the order of aarch64_emit_add for clarity.
The test case for emit_sub is fixed so that the proper order of
the operands is needed for the test to pass.
Tested on aarch64-native-extended-gdbserver.
Note: trace-condition.exp was broken a bit so I had to modify it to run
the test. A fix is coming for that in another patch.
gdb/gdbserver/ChangeLog:
* linux-aarch64-low.c (aarch64_emit_add): Switch x1 and x0.
(aarch64_emit_sub): Likewise.
gdb/testsuite/ChangeLog:
* gdb.trace/trace-condition.exp (foreach): Fix emit_sub testcase.
When we build a shared library for testing, it is built differently
whether it is meant for the local system or a remote one. When it is
for the local system, the library is built with no SONAME. So when the
executable is built, roughly in this way:
$ gcc testfile.c /path/to/library.so
the executable will contain an absolute reference to the library. For
example:
$ readelf -a testsuite/gdb.python/py-shared | grep NEEDED
0x0000000000000001 (NEEDED) Shared library: [/home/emaisin/build/binutils-gdb/gdb/testsuite/gdb.python/py-shared-sl.sl]
When testing is done remotely, the absolute path obviously doesn't work.
Therefore, we build the library with an SONAME:
$ readelf -a testsuite/gdb.python/py-shared-sl.sl | grep SONAME
0x000000000000000e (SONAME) Library soname: [py-shared-sl.sl]
which ends up in the executable's NEEDED field:
$ readelf -a testsuite/gdb.python/py-shared | grep NEEDED
0x0000000000000001 (NEEDED) Shared library: [py-shared-sl.sl]
The executable and the library are then uploaded side-by-side on the
remote system. To allow the dynamic linker to find the shared library,
we have to add the special RPATH value $ORIGIN, which tells it to search
in the executable's directory:
$ readelf -a testsuite/gdb.python/py-shared | grep ORIGIN
0x000000000000000f (RPATH) Library rpath: [$ORIGIN]
The problem with the IPA library is that it doesn't have an SONAME,
making it very difficult to do testing on a remote board. When a
test executable is linked with it, it contains an absolute reference to
the library path. Therefore, unless the paths on the target are the
same as on the build system, it won't work.
To make it possible for tests using the IPA library to run test on
remote boards, I suggest adding an SONAME to libinproctrace.so. I don't
think it should be a big problem for users. All the libraries installed
on my system have an SONAME, so it should be fine if libinproctrace.so
does too.
As a consequence, native testing does not work anymore, since
executables do not contain the absolute path to the library anymore. To
keep them working, we can have gdb_load_shlibs copy the library to the
test directory when testing natively. That's done by modifying
gdb_load_shlibs. We also have to add RPATH=$ORIGIN to executables, even
when testing natively.
I think it's a good change in general, as it reduces the differences
between testing a native and a remote target. To further reduce those
differences, we can also always build test shared libraries with an
SONAME.
ftrace.exp and ftrace-lock.exp need to be modified slightly. The code
checks that the IPA library is loaded using the absolute path on the
build machine. That obviously doesn't work if the test is done
remotely, as the path will be different. I changed the tests to only
search for the library basename (e.g. libinproctrace.so).
gdb/gdbserver/ChangeLog:
* Makefile.in ($(IPA_LIB)): Set SONAME of the IPA lib.
gdb/testsuite/ChangeLog:
* gdb.trace/ftrace-lock.exp: Check for IPA basename instead of
absolute.
* gdb.trace/ftrace.exp: Likewise.
* lib/gdb.exp (gdb_compile): Set rpath $ORIGIN for non-remote
targets as well.
(gdb_compile_shlib): Set SONAME for non-remote targets as well.
(gdb_load_shlibs): Copy libraries to test directory when testing
natively. Only set solib-search-path if testing remotely.
* lib/mi-support.exp (mi_load_shlibs): Likewise.
The getauxval code was wrongly included in code area only compiled for
gdbserver. Move it to a #ifdef IN_PROCESS_AGENT area that already
contains lots of IPA-only code.
gdb/gdbserver/ChangeLog:
* tracepoint.c (getauxval): Move to #ifdef IN_PROCESS_AGENT.
These files need AT_PHDR, which is defined in elf.h. If HAVE_GETAUXVAL
is set, it's implicitely included by sys/auxv.h. Include it manually
for the opposite case.
gdb/gdbserver/ChangeLog:
* linux-aarch64-ipa.c: Add <elf.h> include.
* linux-ppc-ipa.c: Add <elf.h> include.
* linux-s390-ipa.c: Add <elf.h> include.
These were introduced by 1cda151268
and a13c46966d . One is a simple
missing cast, the other is const usage on global function pointers
exported from IPA: in C++, consts are static, and thus won't be
exported from the DSO (the build error was because of non-applicable
visibility("default")).
gdb/gdbserver/ChangeLog:
* tracepoint.c (gdb_collect_ptr): Remove const qualifier.
(get_raw_reg_ptr): Likewise.
(get_trace_state_variable_value_ptr): Likewise.
(set_trace_state_variable_value_ptr): Likewise.
(initialize_tracepoint): Cast alloc_jump_pad_buffer result to
char *.
gdb/gdbserver/ChangeLog:
2016-03-31 Wei-cheng Wang <cole945@gmail.com>
Marcin Kościelnicki <koriakin@0x04.net>
PR/17221
* linux-ppc-low.c (emit_insns): New function.
(__EMIT_ASM, _EMIT_ASM, EMIT_ASM): New macros.
(ppc_emit_prologue): New function.
(ppc_emit_epilogue): New function.
(ppc_emit_add): New function.
(ppc_emit_sub): New function.
(ppc_emit_mul): New function.
(ppc_emit_lsh): New function.
(ppc_emit_rsh_signed): New function.
(ppc_emit_rsh_unsigned): New function.
(ppc_emit_ext): New function.
(ppc_emit_zero_ext): New function.
(ppc_emit_log_not): New function.
(ppc_emit_bit_and): New function.
(ppc_emit_bit_or): New function.
(ppc_emit_bit_xor): New function.
(ppc_emit_bit_not): New function.
(ppc_emit_equal): New function.
(ppc_emit_less_signed): New function.
(ppc_emit_less_unsigned): New function.
(ppc_emit_ref): New function.
(ppc_emit_const): New function.
(ppc_emit_reg): New function.
(ppc_emit_pop): New function.
(ppc_emit_stack_flush): New function.
(ppc_emit_swap): New function.
(ppc_emit_stack_adjust): New function.
(ppc_emit_call): New function.
(ppc_emit_int_call_1): New function.
(ppc_emit_void_call_2): New function.
(ppc_emit_if_goto): New function.
(ppc_emit_goto): New function.
(ppc_emit_eq_goto): New function.
(ppc_emit_ne_goto): New function.
(ppc_emit_lt_goto): New function.
(ppc_emit_le_goto): New function.
(ppc_emit_gt_goto): New function.
(ppc_emit_ge_goto): New function.
(ppc_write_goto_address): New function.
(ppc_emit_ops_impl): New static variable.
(ppc64v1_emit_prologue): New function.
(ppc64v2_emit_prologue): New function.
(ppc64_emit_epilogue): New function.
(ppc64_emit_add): New function.
(ppc64_emit_sub): New function.
(ppc64_emit_mul): New function.
(ppc64_emit_lsh): New function.
(ppc64_emit_rsh_signed): New function.
(ppc64_emit_rsh_unsigned): New function.
(ppc64_emit_ext): New function.
(ppc64_emit_zero_ext): New function.
(ppc64_emit_log_not): New function.
(ppc64_emit_bit_and): New function.
(ppc64_emit_bit_or): New function.
(ppc64_emit_bit_xor): New function.
(ppc64_emit_bit_not): New function.
(ppc64_emit_equal): New function.
(ppc64_emit_less_signed): New function.
(ppc64_emit_less_unsigned): New function.
(ppc64_emit_ref): New function.
(ppc64_emit_const): New function.
(ppc64v1_emit_reg): New function.
(ppc64v2_emit_reg): New function.
(ppc64_emit_pop): New function.
(ppc64_emit_stack_flush): New function.
(ppc64_emit_swap): New function.
(ppc64v1_emit_call): New function.
(ppc64v2_emit_call): New function.
(ppc64v1_emit_int_call_1): New function.
(ppc64v2_emit_int_call_1): New function.
(ppc64v1_emit_void_call_2): New function.
(ppc64v2_emit_void_call_2): New function.
(ppc64_emit_if_goto): New function.
(ppc64_emit_eq_goto): New function.
(ppc64_emit_ne_goto): New function.
(ppc64_emit_lt_goto): New function.
(ppc64_emit_le_goto): New function.
(ppc64_emit_gt_goto): New function.
(ppc64_emit_ge_goto): New function.
(ppc64v1_emit_ops_impl): New static variable.
(ppc64v2_emit_ops_impl): New static variable.
(ppc_emit_ops): New function.
(linux_low_target): Wire in ppc_emit_ops.
gdb/gdbserver/ChangeLog:
2016-03-31 Wei-cheng Wang <cole945@gmail.com>
Marcin Kościelnicki <koriakin@0x04.net>
PR/17221
* Makefile.in: Add powerpc-*-ipa.o
* configure.srv: Add ipa_obj for powerpc*-linux.
* linux-ppc-ipa.c: New file.
* linux-ppc-low.c: Added linux-ppc-tdesc.h, ax.h, tracepoint.h
includes.
(PPC_FIELD): New macro.
(PPC_SEXT): New macro.
(PPC_OP6): New macro.
(PPC_BO): New macro.
(PPC_LI): New macro.
(PPC_BD): New macro.
(init_registers_*): Move prototype to linux-ppc-tdesc.h.
(tdesc_*): Move declaration to linux-ppc-tdesc.h.
(ppc_get_hwcap): Rename to ppc_get_auxv and add type parameter.
(ppc_get_thread_area): New function.
(is_elfv2_inferior): New function.
(gen_ds_form): New function.
(GEN_STD): New macro.
(GEN_STDU): New macro.
(GEN_LD): New macro.
(GEN_LDU): New macro.
(gen_d_form): New function.
(GEN_ADDI): New macro.
(GEN_ADDIS): New macro.
(GEN_LI): New macro.
(GEN_LIS): New macro.
(GEN_ORI): New macro.
(GEN_ORIS): New macro.
(GEN_LWZ): New macro.
(GEN_STW): New macro.
(GEN_STWU): New macro.
(gen_xfx_form): New function.
(GEN_MFSPR): New macro.
(GEN_MTSPR): New macro.
(GEN_MFCR): New macro.
(GEN_MTCR): New macro.
(GEN_SYNC): New macro.
(GEN_LWSYNC): New macro.
(gen_x_form): New function.
(GEN_OR): New macro.
(GEN_MR): New macro.
(GEN_LWARX): New macro.
(GEN_STWCX): New macro.
(GEN_CMPW): New macro.
(gen_md_form): New function.
(GEN_RLDICL): New macro.
(GEN_RLDICR): New macro.
(gen_i_form): New function.
(GEN_B): New macro.
(GEN_BL): New macro.
(gen_b_form): New function.
(GEN_BNE): New macro.
(GEN_LOAD): New macro.
(GEN_STORE): New macro.
(gen_limm): New function.
(gen_atomic_xchg): New function.
(gen_call): New function.
(ppc_relocate_instruction): New function.
(ppc_install_fast_tracepoint_jump_pad): New function.
(ppc_get_min_fast_tracepoint_insn_len): New function.
(ppc_get_ipa_tdesc_idx): New function.
(the_low_target): Wire in the new functions.
(initialize_low_arch) [!__powerpc64__]: Don'it initialize 64-bit
tdescs.
* linux-ppc-tdesc.h: New file.
Targets may have various requirements on the required location of the jump
pad area. Currently IPA allocates it at the lowest possible address,
so that it is reachable by branches from the executable. However, this
fails on powerpc, which has executable link address (0x10000000) much
larger than branch reach (+/- 32MiB).
This makes jump pad buffer allocation a target hook instead. The current
implementations are as follows:
- i386 and s390: Branches can reach anywhere, so just mmap it. This
avoids the linear search dance.
- x86_64: Branches have +/-2GiB of reach, and executable is loaded low,
so just call mmap with MAP_32BIT. Likewise avoids the linear search.
- aarch64: Branches have +-128MiB of reach, executable loaded at 4MiB.
Do a linear search from 4MiB-size downwards to page_size.
- s390x: Branches have +-4GiB of reach, executable loaded at 2GiB.
Do like on aarch64.
gdb/gdbserver/ChangeLog:
* linux-aarch64-ipa.c: Add <sys/mman.h> and <sys/auxv.h> includes.
(alloc_jump_pad_buffer): New function.
* linux-amd64-ipa.c: Add <sys/mman.h> include.
(alloc_jump_pad_buffer): New function.
* linux-i386-ipa.c (alloc_jump_pad_buffer): New function.
* linux-s390-ipa.c: Add <sys/mman.h> and <sys/auxv.h> includes.
(alloc_jump_pad_buffer): New function.
* tracepoint.c (getauxval) [!HAVE_GETAUXVAL]: New function.
(initialize_tracepoint): Delegate to alloc_jump_pad_buffer.
* tracepoint.h (alloc_jump_pad_buffer): New prototype.
(getauxval) [!HAVE_GETAUXVAL]: New prototype.
On powerpc64, qSymbol for a function returns the function code address,
and not the descriptor address. Since we emit code calling gdb_collect
and some other functions, we need the descriptor (no way to know the
proper TOC address without it). To get the descriptor address, make
global function pointer variables in the IPA pointing to the relevant
functions and read them instead of asking for them directly via qSymbol.
gdb/gdbserver/ChangeLog:
* linux-aarch64-ipa.c: Rename gdb_agent_get_raw_reg to get_raw_reg.
* linux-amd64-ipa.c: Likewise.
* linux-i386-ipa.c: Likewise.
* linux-s390-ipa.c: Likewise.
* tracepoint.c: IPA-export gdb_collect_ptr instead of gdb_collect,
ditto for get_raw_reg_ptr, get_trace_state_variable_value_ptr,
set_trace_state_variable_value_ptr.
(struct ipa_sym_addresses): Likewise.
(symbol_list): Likewise.
(install_fast_tracepoint): Dereference gdb_collect_ptr instead of
accessing gdb_collect directly.
(gdb_collect_ptr_type): New typedef.
(get_raw_reg_ptr_type): New typedef.
(get_trace_state_variable_value_ptr_type): New typedef.
(set_trace_state_variable_value_ptr_type): New typedef.
(gdb_collect_ptr): New global.
(get_raw_reg_ptr): New global.
(get_trace_state_variable_value_ptr): New global.
(set_trace_state_variable_value_ptr): New global.
(get_raw_reg_func_addr): Dereference get_raw_reg_ptr instead of
accessing get_raw_reg directly.
(get_get_tsv_func_addr): Likewise for
get_trace_state_variable_value_ptr.
(get_set_tsv_func_addr): Likewise for
set_trace_state_variable_value_ptr.
* tracepoint.h: Rename gdb_agent_get_raw_reg to get_raw_reg.
On powerpc64, qSymbol query may require gdb to read a function
descriptor, sending a vFile packet to gdbserver. Thus, we need
to handle 'v' packet in look_up_one_symbol.
vFile replies may be quite long, and require reallocating own_buf.
Since handle_v_requests assumes the buffer is the static global own_buf
from server.c and reallocates it, we need to make own_buf global and
use it from look_up_one_symbol instead of using our own auto variable.
I've also done the same change in relocate_instruction, just in case.
On gdb side, in remote_check_symbols, rs->buf may be clobbered by vFile
handling, yet we need its contents for the reply (the symbol name is
stored there). Allocate a new buffer instead.
This broke fast tracepoints on powerpc64, due to errors in reading IPA
symbols.
gdb/ChangeLog:
* remote.c (remote_check_symbols): Allocate own buffer for reply.
gdbserver/ChangeLog:
* remote-utils.c (look_up_one_symbol): Remove own_buf, handle 'v'
packets.
(relocate_instruction): Remove own_buf.
* server.c (own_buf): Make global.
(handle_v_requests): Make global.
* server.h (own_buf): New declaration.
(handle_v_requests): New prototype.
These sequences assume a z900+ CPU, like the rest of fast tracepoint
support.
gdb/gdbserver/ChangeLog:
PR 18377
* linux-s390-low.c (add_insns): New function.
(s390_emit_prologue): New function.
(s390_emit_epilogue): New function.
(s390_emit_add): New function.
(s390_emit_sub): New function.
(s390_emit_mul): New function.
(s390_emit_lsh): New function.
(s390_emit_rsh_signed): New function.
(s390_emit_rsh_unsigned): New function.
(s390_emit_ext): New function.
(s390_emit_log_not): New function.
(s390_emit_bit_and): New function.
(s390_emit_bit_or): New function.
(s390_emit_bit_xor): New function.
(s390_emit_bit_not): New function.
(s390_emit_equal): New function.
(s390_emit_less_signed): New function.
(s390_emit_less_unsigned): New function.
(s390_emit_ref): New function.
(s390_emit_if_goto): New function.
(s390_emit_goto): New function.
(s390_write_goto_address): New function.
(s390_emit_litpool): New function.
(s390_emit_const): New function.
(s390_emit_call): New function.
(s390_emit_reg): New function.
(s390_emit_pop): New function.
(s390_emit_stack_flush): New function.
(s390_emit_zero_ext): New function.
(s390_emit_swap): New function.
(s390_emit_stack_adjust): New function.
(s390_emit_set_r2): New function.
(s390_emit_int_call_1): New function.
(s390_emit_void_call_2): New function.
(s390_emit_eq_goto): New function.
(s390_emit_ne_goto): New function.
(s390_emit_lt_goto): New function.
(s390_emit_le_goto): New function.
(s390_emit_gt_goto): New function.
(s390_emit_ge_goto): New function.
(s390x_emit_prologue): New function.
(s390x_emit_epilogue): New function.
(s390x_emit_add): New function.
(s390x_emit_sub): New function.
(s390x_emit_mul): New function.
(s390x_emit_lsh): New function.
(s390x_emit_rsh_signed): New function.
(s390x_emit_rsh_unsigned): New function.
(s390x_emit_ext): New function.
(s390x_emit_log_not): New function.
(s390x_emit_bit_and): New function.
(s390x_emit_bit_or): New function.
(s390x_emit_bit_xor): New function.
(s390x_emit_bit_not): New function.
(s390x_emit_equal): New function.
(s390x_emit_less_signed): New function.
(s390x_emit_less_unsigned): New function.
(s390x_emit_ref): New function.
(s390x_emit_if_goto): New function.
(s390x_emit_const): New function.
(s390x_emit_call): New function.
(s390x_emit_reg): New function.
(s390x_emit_pop): New function.
(s390x_emit_stack_flush): New function.
(s390x_emit_zero_ext): New function.
(s390x_emit_swap): New function.
(s390x_emit_stack_adjust): New function.
(s390x_emit_int_call_1): New function.
(s390x_emit_void_call_2): New function.
(s390x_emit_eq_goto): New function.
(s390x_emit_ne_goto): New function.
(s390x_emit_lt_goto): New function.
(s390x_emit_le_goto): New function.
(s390x_emit_gt_goto): New function.
(s390x_emit_ge_goto): New function.
(s390_emit_ops): New function.
(struct linux_target_ops): Fill in emit_ops hook.
Fast tracepoints will only work on 6-byte intructions, and assume at least
a z900 CPU. s390 also has 4-byte jump instructions, which also work on
pre-z900, but their range is limitted to +-64kiB, which is not very useful
(and wouldn't work at all with current jump pad allocation).
There's a little problem with s390_relocate_instruction function: it
converts BRAS/BRASL instructions to LARL of the return address + JG
to the target address. On 31-bit, this sets the high bit of the target
register to 0, while BRAS/BRASL would set it to 1. While this is not
a problem when the result is only used to address memory, it could
possibly break something that expects to compare such addresses for
equality without first masking the bit off. In particular, I'm not sure
whether leaving the return address high bit unset is ABI-compliant
(could confuse some unwinder?). If that's a problem, it could be fixed
by handling it in the jump pad (since at that point we can just modify
the GPRs in the save area without having to worry about preserving
CCs and only having that one GPR to work with - I'm not sure if it's
even possible to set the high bit with such constraints).
gdb/gdbserver/ChangeLog:
PR 18377
* Makefile.in: Add s390 IPA files.
* configure.srv: Build IPA for s390.
* linux-s390-ipa.c: New file.
* linux-s390-low.c: New includes - inttypes.h and linux-s390-tdesc.h.
(init_registers_s390_linux32): Move declaration to linux-s390-tdesc.h.
(tdesc_s390_linux32): Likewise.
(init_registers_s390_linux32v1): Likewise.
(tdesc_s390_linux32v1): Likewise.
(init_registers_s390_linux32v2): Likewise.
(tdesc_s390_linux32v2): Likewise.
(init_registers_s390_linux64): Likewise.
(tdesc_s390_linux64): Likewise.
(init_registers_s390_linux64v1): Likewise.
(tdesc_s390_linux64v1): Likewise.
(init_registers_s390_linux64v2): Likewise.
(tdesc_s390_linux64v2): Likewise.
(init_registers_s390_te_linux64): Likewise.
(tdesc_s390_te_linux64): Likewise.
(init_registers_s390_vx_linux64): Likewise.
(tdesc_s390_vx_linux64): Likewise.
(init_registers_s390_tevx_linux64): Likewise.
(tdesc_s390_tevx_linux64): Likewise.
(init_registers_s390x_linux64): Likewise.
(tdesc_s390x_linux64): Likewise.
(init_registers_s390x_linux64v1): Likewise.
(tdesc_s390x_linux64v1): Likewise.
(init_registers_s390x_linux64v2): Likewise.
(tdesc_s390x_linux64v2): Likewise.
(init_registers_s390x_te_linux64): Likewise.
(tdesc_s390x_te_linux64): Likewise.
(init_registers_s390x_vx_linux64): Likewise.
(tdesc_s390x_vx_linux64): Likewise.
(init_registers_s390x_tevx_linux64): Likewise.
(tdesc_s390x_tevx_linux64): Likewise.
(have_hwcap_s390_vx): New static variable.
(s390_arch_setup): Fill have_hwcap_s390_vx.
(s390_get_thread_area): New function.
(s390_ft_entry_gpr_esa): New const.
(s390_ft_entry_gpr_zarch): New const.
(s390_ft_entry_misc): New const.
(s390_ft_entry_fr): New const.
(s390_ft_entry_vr): New const.
(s390_ft_main_31): New const.
(s390_ft_main_64): New const.
(s390_ft_exit_fr): New const.
(s390_ft_exit_vr): New const.
(s390_ft_exit_misc): New const.
(s390_ft_exit_gpr_esa): New const.
(s390_ft_exit_gpr_zarch): New const.
(append_insns): New function.
(s390_relocate_instruction): New function.
(s390_install_fast_tracepoint_jump_pad): New function.
(s390_get_min_fast_tracepoint_insn_len): New function.
(s390_get_ipa_tdesc_idx): New function.
(struct linux_target_ops): Wire in the above functions.
(initialize_low_arch) [!__s390x__]: Don't initialize s390x tdescs.
* linux-s390-tdesc.h: New file.
Also adds s390 support to gdb.trace testsuite.
gdb/gdbserver/ChangeLog:
* linux-s390-low.c (s390_supports_tracepoints): New function.
(struct linux_target_ops): Fill supports_tracepoints hook.
gdb/testsuite/ChangeLog:
* gdb.trace/ftrace.exp: Set arg0exp for s390.
* gdb.trace/mi-trace-frame-collected.exp: Expect 4 registers on s390.
* gdb.trace/mi-trace-unavailable.exp: Set pcnum for s390, add gpr0num
variable for GPR 0 instead of assuming it is register 0.
* gdb.trace/trace-common.h: Add s390 fast tracepoint placeholder.
* lib/trace-support.exp: Add s390 registers.
The enqueue and dequeue signals in linux_resume_one_lwp_throw use one
condition and its inverted one. This patch is to move the condition
into a function lwp_signal_can_be_delivered, so that the next patch can
change the condition in one place.
gdb/gdbserver:
2016-03-18 Yao Qi <yao.qi@linaro.org>
* linux-low.c (lwp_signal_can_be_delivered): New function.
(linux_resume_one_lwp_throw): Use lwp_signal_can_be_delivered.
Today, we enqueue signal in linux_resume_one_lwp_throw, but set
variable 'signal' many lines below with the comment
/* Postpone any pending signal. It was enqueued above. */
signal = 0;
I feel difficult to associate code across many lines, and we should
move the code close to enqueue_pending_signal call. This is what
this patch does in general. After this change, variable 'signal'
is set to zero very early, so the 'signal' value in the following
debugging message makes no sense, so I remove it from the debugging
message. The function returns early if lwp->status_pending_p is
true, so 'signal' value in the debugging message doesn't matter,
AFAICS. Also, I move one debugging message several lines below to
make it close the real ptrace call,
if (debug_threads)
debug_printf ("Resuming lwp %ld (%s, signal %d, stop %s)\n",
lwpid_of (thread), step ? "step" : "continue", signal,
lwp->stop_expected ? "expected" : "not expected");
so that the debugging message can reflect what GDBserver does. This
is a code refactor and only debugging messages are affected.
gdb/gdbserver:
2016-03-18 Yao Qi <yao.qi@linaro.org>
* linux-low.c (linux_resume_one_lwp_throw): Set 'signal' to
0 if signal is enqueued. Remove 'signal' from one debugging
message. Move one debugging message to some lines below.
Remove code setting 'signal' to 0.
WIFSTOPPED is checked linux_wstatus_maybe_breakpoint, so WIFSTOPPED
in "WIFSTOPPED (wstat) && linux_wstatus_maybe_breakpoint (wstat)"
is redundant. This patch removes WIFSTOPPED check.
gdb/gdbserver:
2016-03-18 Yao Qi <yao.qi@linaro.org>
* linux-low.c (linux_low_filter_event): Remove redundant
WIFSTOPPED check together with linux_wstatus_maybe_breakpoint.
gdb/gdbserver/ChangeLog:
* linux-ppc-low.c (ppc_supports_tracepoints): New function.
(struct linux_target_ops): Wire in the above.
gdb/testsuite/ChangeLog:
* gdb.trace/ftrace.exp: Set arg0exp for ppc.
* gdb.trace/mi-trace-unavailable.exp: Set pcnum for ppc.
* gdb.trace/pending.exp: Accept leading dot before function name.
* gdb.trace/trace-common.h: Add fast tracepoint dummy insn for ppc.
* lib/trace-support.exp: Set registers for ppc.
I happen to see that comments to start_step_over isn't in sync with
code, so this patch is to update the comments.
gdb/gdbserver:
2016-03-03 Yao Qi <yao.qi@linaro.org>
* linux-low.c: Update comments to start_step_over.
I see the following GDBserver internal error in two cases,
gdb/gdbserver/linux-low.c:1922: A problem internal to GDBserver has been detected.
unsuspend LWP 17200, suspended=-1
1. step over a breakpoint on fork/vfork syscall instruction,
2. step over a breakpoint on clone syscall instruction and child
threads hits a breakpoint,
the stack backtrace is
#0 internal_error (file=file@entry=0x44c4c0 "gdb/gdbserver/linux-low.c", line=line@entry=1922,
fmt=fmt@entry=0x44c7d0 "unsuspend LWP %ld, suspended=%d\n") at gdb/gdbserver/../common/errors.c:51
#1 0x0000000000424014 in lwp_suspended_decr (lwp=<optimised out>, lwp=<optimised out>) at gdb/gdbserver/linux-low.c:1922
#2 0x000000000042403a in unsuspend_one_lwp (entry=<optimised out>, except=0x66e8c0) at gdb/gdbserver/linux-low.c:2885
#3 0x0000000000405f45 in find_inferior (list=<optimised out>, func=func@entry=0x424020 <unsuspend_one_lwp>, arg=arg@entry=0x66e8c0)
at gdb/gdbserver/inferiors.c:243
#4 0x00000000004297de in unsuspend_all_lwps (except=0x66e8c0) at gdb/gdbserver/linux-low.c:2895
#5 linux_wait_1 (ptid=..., ourstatus=ourstatus@entry=0x665ec0 <last_status>, target_options=target_options@entry=0)
at gdb/gdbserver/linux-low.c:3632
#6 0x000000000042a764 in linux_wait (ptid=..., ourstatus=0x665ec0 <last_status>, target_options=0)
at gdb/gdbserver/linux-low.c:3770
#7 0x0000000000411163 in mywait (ptid=..., ourstatus=ourstatus@entry=0x665ec0 <last_status>, options=options@entry=0, connected_wait=connected_wait@entry=1)
at gdb/gdbserver/target.c:214
#8 0x000000000040b1f2 in resume (actions=0x66f800, num_actions=1) at gdb/gdbserver/server.c:2757
#9 0x000000000040f660 in handle_v_cont (own_buf=0x66a630 "vCont;c:p45e9.-1") at gdb/gdbserver/server.c:2719
when GDBserver steps over a thread, other threads have been suspended,
the "stepping" thread may create new thread, but GDBserver doesn't set
it suspend count to 1. When GDBserver unsuspend threads, the child's
suspend count goes to -1, and the assert is triggered. In fact, GDBserver
has already taken care of suspend count of new thread when GDBserver is
suspending all threads except the one GDBserver wants to step over by
https://sourceware.org/ml/gdb-patches/2015-07/msg00946.html
+ /* If we're suspending all threads, leave this one suspended
+ too. */
+ if (stopping_threads == STOPPING_AND_SUSPENDING_THREADS)
+ {
+ if (debug_threads)
+ debug_printf ("HEW: leaving child suspended\n");
+ child_lwp->suspended = 1;
+ }
but that is not enough, because new thread is still can be spawned in
the thread which is being stepped over. This patch extends the
condition that GDBserver set child's suspend count to one if it is
suspending threads or stepping over the thread.
gdb/gdbserver:
2016-03-03 Yao Qi <yao.qi@linaro.org>
PR server/19736
* linux-low.c (handle_extended_wait): Set child suspended
if event_lwp->bp_reinsert isn't zero.
Replace the code which is exactly what enqueue_pending_signal does.
gdb/gdbserver:
2016-03-02 Yao Qi <yao.qi@linaro.org>
* linux-low.c (linux_resume_one_lwp_throw): Replace code with
enqueue_pending_signal.
Fixes rather embarassing gdb.trace regressions.
gdb/gdbserver/ChangeLog:
* tracepoint.c (cmd_qtstart): Only set ipa_tdesc_idx if agent
is actually loaded.
Currently, 31-bit gdbserver doesn't support collecting/supplying high
GPRs, VX registers, and TDB data. This is not much of a problem now,
since machines that have them usually have a 64-bit gdbserver that can
be used to debug 31-bit targets just fine. However, with fast
tracepoints, it's not possible to use a 64-bit gdbserver with a 31-bit
IPA (and thus a 31-bit target), so 31-bit gdbserver has to be used
for 31-bit targets. Thus, this patch is needed to allow collecting
high GPRs and VX registers on 31-bit targets via fast tracepoints.
gdb/gdbserver/ChangeLog:
* linux-s390-low.c (s390_num_regs_3264): Define on 31-bit too.
(s390_regmap_3264) [!__s390x__]: New global.
(s390_collect_ptrace_register): Skip map entries containing -1.
(s390_supply_ptrace_register): Ditto.
(s390_fill_gprs_high): New function.
(s390_store_gprs_high): New function.
(s390_regsets): Add NT_S390_HIGH_GPRS.
(s390_get_hwcap): Enable on 31-bit.
(have_hwcap_s390_high_gprs): Enable on 31-bit.
(s390_arch_setup): Enable detection of high GPRs, TDB, VX on 31-bit.
Detect NT_S390_HIGH_GPRS.
(s390_usrregs_info_3264): Enable on 31-bit.
(s390_regs_info): Enable regs_info_3264 on 31-bit.
(initialize_low_arch): Initialize s390_regsets_info_3264 on 31-bit.
If gdbserver and IPA are using different tdesc, they will disagree
about 'R' trace packet size. This results in mangled traces.
To make sure they pick the same tdesc, gdbserver pokes the tdesc
(specified as an index in a target-specific list) into a global
variable in IPA. In theory, IPA could find out the tdesc on its
own, but that may be complex (in particular, I don't know how to
tell whether we have LAST_BREAK on s390 without messing with ptrace),
and we'd have to duplicate the logic.
Tested on i386 and x86_64. On i386, it fixes two FAILs in ftrace.exp.
On x86_64, these failures have been KFAILed - one of them works now,
but the other now fails due to an unrelated reason (ugh).
gdb/gdbserver/ChangeLog:
PR gdb/13808
* Makefile.in: Add i386-*-linux-ipa.o and amd64-*-linux-ipa.o.
* configure.srv: Ditto.
* linux-aarch64-ipa.c (get_ipa_tdesc): New function.
(initialize_low_tracepoint): Remove ipa_tdesc assignment.
* linux-amd64-ipa.c: Add "linux-x86-tdesc.h" include.
(init_registers_amd64_linux): Remove prototype.
(tdesc_amd64_linux): Remove declaration.
(get_ipa_tdesc): New function.
(initialize_low_tracepoint): Remove ipa_tdesc assignment,
initialize remaining tdescs.
* linux-i386-ipa.c: Add "linux-x86-tdesc.h" include.
(init_registers_i386_linux): Remove prototype.
(tdesc_i386_linux): Remove declaration.
(get_ipa_tdesc): New function.
(initialize_low_tracepoint): Remove ipa_tdesc assignment,
initialize remaining tdescs.
* linux-low.c (linux_get_ipa_tdesc_idx): New function.
(linux_target_ops): wire in linux_get_ipa_tdesc_idx.
* linux-low.h (struct linux_target_ops): Add get_ipa_tdesc_idx.
* linux-x86-low.c: Move tdesc declarations to linux-x86-tdesc.h.
(x86_get_ipa_tdesc_idx): New function.
(the_low_target): Wire in x86_get_ipa_tdesc_idx.
* linux-x86-tdesc.h: New file.
* target.h (struct target_ops): Add get_ipa_tdesc_idx.
(target_get_ipa_tdesc_idx): New macro.
* tracepoint.c (ipa_tdesc_idx): New macro.
(struct ipa_sym_addresses): Add addr_ipa_tdesc_idx.
(symbol_list): Add ipa_tdesc_idx.
(cmd_qtstart): Write ipa_tdesc_idx in the target.
(ipa_tdesc): Remove.
(ipa_tdesc_idx): New variable.
(get_context_regcache): Use get_ipa_tdesc.
(gdb_collect): Ditto.
(gdb_probe): Ditto.
* tracepoint.h (get_ipa_tdesc): New prototype.
(ipa_tdesc): Remove.
gdb/testsuite/ChangeLog:
PR gdb/13808
* gdb.trace/ftrace.exp (test_fast_tracepoints): Remove kfail.
This unbreaks pending/delayed breakpoints handling, as well as
hardware watchpoints, on MIPS.
Ref: https://sourceware.org/ml/gdb-patches/2016-02/msg00681.html
The MIPS kernel reports SI_KERNEL for all kernel generated traps,
instead of TRAP_BRKPT / TRAP_HWBKPT, but GDB isn't aware of this.
Basically, this commit:
- Folds watchpoints logic into check_stopped_by_breakpoint, and
renames it to save_stop_reason.
- Adds GDB_ARCH_IS_TRAP_HWBKPT.
- Makes MIPS set both GDB_ARCH_IS_TRAP_BRPT and
GDB_ARCH_IS_TRAP_HWBKPT to SI_KERNEL. In save_stop_reason, we
handle the case of the same si_code returning true for both
TRAP_BRPT and TRAP_HWBKPT by looking at what the debug registers
say.
Tested on x86-64 Fedora 20, native and gdbserver.
gdb/ChangeLog:
2016-02-24 Pedro Alves <palves@redhat.com>
* linux-nat.c (save_sigtrap) Delete.
(stop_wait_callback): Call save_stop_reason instead of
save_sigtrap.
(check_stopped_by_breakpoint): Rename to ...
(save_stop_reason): ... this. Bits of save_sigtrap folded here.
Use GDB_ARCH_IS_TRAP_HWBKPT and handle ambiguous
GDB_ARCH_IS_TRAP_BRKPT / GDB_ARCH_IS_TRAP_HWBKPT. Factor out
common code between the USE_SIGTRAP_SIGINFO and
!USE_SIGTRAP_SIGINFO blocks.
(linux_nat_filter_event): Call save_stop_reason instead of
save_sigtrap.
* nat/linux-ptrace.h: Check for both SI_KERNEL and TRAP_BRKPT
si_code for MIPS.
* nat/linux-ptrace.h: Fix "TRAP_HWBPT" typo in x86 table. Add
comments on MIPS behavior.
(GDB_ARCH_IS_TRAP_HWBKPT): Define for all archs.
gdb/gdbserver/ChangeLog:
2016-02-24 Pedro Alves <palves@redhat.com>
* linux-low.c (check_stopped_by_breakpoint): Rename to ...
(save_stop_reason): ... this. Use GDB_ARCH_IS_TRAP_HWBKPT and
handle ambiguous GDB_ARCH_IS_TRAP_BRKPT / GDB_ARCH_IS_TRAP_HWBKPT.
Factor out common code between the USE_SIGTRAP_SIGINFO and
!USE_SIGTRAP_SIGINFO blocks.
(linux_low_filter_event): Call save_stop_reason instead of
check_stopped_by_breakpoint and check_stopped_by_watchpoint.
Update comments.
(linux_wait_1): Update comments.
Support z-point, so tracepoints and breakpoints can be inserted at the same
location.
gdb/gdbserver/ChangeLog:
2016-02-24 Wei-cheng Wang <cole945@gmail.com>
* linux-ppc-low.c (ppc_supports_z_point_type): New function:
(ppc_insert_point, ppc_remove_point): Insert/remove z-packet breakpoints.
(ppc64_emit_ops_vector): Add target ops - ppc_supports_z_point_type,
ppc_insert_point, ppc_remove_point.
This is necessary for upcoming tracepoint support - otherwise, setting
a tracepoint and a breakpoint on the same address will fail, since gdbserver
won't know about gdb's breakpoint.
Tested on s390x-ibm-linux-gnu and s390-ibm-linux-gnu, RHEL 7.2.
gdb/gdbserver/ChangeLog:
* linux-s390-low.c (s390_supports_z_point_type): New function.
(struct linux_target_ops): Wire s390_supports_z_point_type in.
Method syscall_next_pc of struct arm_get_next_pcs_ops has an argument
PC, which is not necessary, because PC can be got from regcache in
'struct arm_get_next_pcs'. This patch removes the PC argument of
syscall_next_pc.
gdb:
2016-02-16 Yao Qi <yao.qi@linaro.org>
* arch/arm-get-next-pcs.h (struct arm_get_next_pcs_ops)
<syscall_next_pc>: Remove argument PC. Callers updated.
* arm-linux-tdep.c (arm_linux_get_next_pcs_syscall_next_pc):
Remove argument PC. Get pc from regcache_read_pc.
* arm-tdep.c (arm_get_next_pcs_syscall_next_pc): Remove
argument PC.
gdb/gdbserver:
2016-02-16 Yao Qi <yao.qi@linaro.org>
* linux-arm-low.c (get_next_pcs_syscall_next_pc): Remove argument
PC. Get pc from regcache_read_pc.
We can use shared functions linux_{set,get}_pc_{64,32}bit in
linux-aarch64-low.c to write and read pc.
gdb/gdbserver:
2016-02-12 Yao Qi <yao.qi@linaro.org>
* linux-aarch64-low.c (aarch64_get_pc): Call linux_get_pc_64bit
or linux_get_pc_32bit.
(aarch64_set_pc): Call linux_set_pc_64bit or linux_set_pc_32bit.
When I exercise GDBserver software single step, I see the following
error, which has been already handled by GDB properly.
In GDBserver log, we can see, GDBserver tries to single step instruction
on 0xb6e0a6e4, and destination address is 0xffff0fe0,
stop pc is 0xb6e0a6e4
Writing f001f0e7 to 0xffff0fe0 in process 7132
Failed to insert breakpoint at 0xffff0fe0 (Input/output error).
Failed to insert breakpoint at 0xffff0fe0 (-1).
(gdb) disassemble __aeabi_read_tp,+8
Dump of assembler code from 0xb6e0a6e0 to 0xb6e0a6e8:
0xb6e0a6e0 <__aeabi_read_tp+0>: mvn r0, #61440 ; 0xf000
0xb6e0a6e4 <__aeabi_read_tp+4>: sub pc, r0, #31
however, it fails inserting breakpoint there. This problem has already
fixed by GDB, see comments in arm-linux-tdep.c:arm_linux_software_single_step
/* The Linux kernel offers some user-mode helpers in a high page. We can
not read this page (as of 2.6.23), and even if we could then we
couldn't set breakpoints in it, and even if we could then the atomic
operations would fail when interrupted. They are all called as
functions and return to the address in LR, so step to there
instead. */
so we need to do the same thing in GDB side as well. This patch adds
a new field fixup in arm_get_next_pcs_ops, so that we can fix up PC
for arm-linux target. In this way, both GDB and GDBserver can single
step instructions going to kernel helpers.
gdb:
2016-02-12 Yao Qi <yao.qi@linaro.org>
* arch/arm-get-next-pcs.c (arm_get_next_pcs): Call
self->ops->fixup if it isn't NULL.
* arch/arm-get-next-pcs.h: Include gdb_vecs.h.
(struct arm_get_next_pcs_ops) <fixup>: New field.
* arch/arm-linux.c: Include common-regcache.h and
arch/arm-get-next-pcs.h.
(arm_linux_get_next_pcs_fixup): New function.
* arch/arm-linux.h (arm_linux_get_next_pcs_fixup): Declare.
* arm-linux-tdep.c (arm_linux_get_next_pcs_ops): Initialize
it with arm_linux_get_next_pcs_fixup.
(arm_linux_software_single_step): Move code to
arm_linux_get_next_pcs_fixup.
* arm-tdep.c (arm_get_next_pcs_ops): Initialize it.
gdb/gdbserver:
2016-02-12 Yao Qi <yao.qi@linaro.org>
* linux-arm-low.c (get_next_pcs_ops): Initialize it with
arm_linux_get_next_pcs_fixup.
This function is now basically identical to write_inferior_data_pointer,
remove it and change all references.
gdb/gdbserver/ChangeLog:
* tracepoint.c (x_tracepoint_action_download): Change
write_inferior_data_ptr to write_inferior_data_pointer.
(cmd_qtstart): Likewise.
(write_inferior_data_ptr): Remove.
(download_agent_expr): Change write_inferior_data_ptr to
write_inferior_data_pointer.
(download_tracepoint_1): Likewise.
(download_tracepoint): Likewise.
(download_trace_state_variables): Likewise.
This patch removes 'ops' in tracepoint, and uses helper functions to
call action handler instead.
The object layout of tracepoint_action may differ in gdbserver and
inferior depend on the alignment rule of target ABI, so gdbserver cannot
simply copy the object from its memory to inferior memory.
For example,
struct collect_memory_action
{
struct tracepoint_action base;
{
#ifndef IN_PROCESS_AGENT
const struct tracepoint_action_ops *ops;
#if
- char type;
| }
| ULONGEST addr;
| ULONGEST len;
- int32_t basereg;
};
and on PowerPC,
Wihtout ops with ops
0 1 2 3 0 1 2 3
0 |type| PADDING... 0 |ops-------------|
4 ................. 4 |type|PADDING....|
8 |addr------------ 8 |addr-------------
c ----------------| c -----------------|
10 |len------------- 10 |len--------------
14 ----------------| 14 -----------------|
18 |basereg--------| 18 |basereg---------|
so we cannot directly copy the object.
In this patch, 'ops' is removed in order to make the objects identical.
gdb/gdbserver/ChangeLog:
2016-02-11 Wei-cheng Wang <cole945@gmail.com>
Marcin Kościelnicki <koriakin@0x04.net>
* tracepoint.c (struct tracepoint_action_ops): Remove.
(struct tracepoint_action): Remove ops.
(m_tracepoint_action_download, r_tracepoint_action_download)
(x_tracepoint_action_download, l_tracepoint_action_download): Adjust
size and offset accordingly.
(m_tracepoint_action_ops, r_tracepoint_action_ops)
(x_tracepoint_action_ops, l_tracepoint_action_ops): Remove.
(tracepoint_action_send, tracepoint_action_download): New functions.
Helpers for trace action handlers.
(add_tracepoint_action): Remove setup actions ops.
(download_tracepoint_1, tracepoint_send_agent): Call helper functions.
We have function regcache_raw_read_unsigned defined in both GDB and
GDBserver, so that it is used in common like this,
ULONGEST value;
status = regcache_raw_read_unsigned (regcache, regnum, &value);
'value' is correctly set in GDB side, but may not be correctly set
in GDBserver, because &value is passed in regcache_raw_read_unsigned
but collect_register may only set part of the whole variable. In my
test, I see the top half of 'value' is garbage. This patch fixes this
problem by clearing *VAL before calling collect_register.
gdb/gdbserver:
2016-02-10 Yao Qi <yao.qi@linaro.org>
* regcache.c (regcache_raw_read_unsigned): Clear *VAL.
Using AC_OUTPUT with arguments has been deprecated for some time in
autoconf, even in version 2.64, which we are using. This change should
not affect functionality.
I also removed the "exit 0"'s, they shouldn't be necessary.
gdb/ChangeLog:
* configure.ac: Use AC_CONFIG_FILES instead of passing arguments
to AC_OUTPUT. Remove "exit 0" at the end.
* configure: Regenerate.
gdb/testsuite/ChangeLog:
* configure.ac: Use AC_CONFIG_FILES instead of passing arguments
to AC_OUTPUT.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
* configure.ac: Use AC_CONFIG_FILES instead of passing arguments
to AC_OUTPUT.
* configure: Regenerate.
Change the signature of gdbserver's siginfo_fixup functions so that it's
in line with gdb's. This gets rid of the following build error in C++:
/home/emaisin/src/binutils-gdb/gdb/gdbserver/linux-x86-low.c: In function ‘int x86_siginfo_fixup(siginfo_t*, void*, int)’:
/home/emaisin/src/binutils-gdb/gdb/gdbserver/linux-x86-low.c:694:21: error: invalid conversion from ‘void*’ to ‘gdb_byte* {aka unsigned char*}’ [-fpermissive]
FIXUP_32);
^
In file included from /home/emaisin/src/binutils-gdb/gdb/gdbserver/linux-x86-low.c:31:0:
/home/emaisin/src/binutils-gdb/gdb/gdbserver/../nat/amd64-linux-siginfo.h:52:5: error: initializing argument 2 of ‘int amd64_linux_siginfo_fixup_common(siginfo_t*, gdb_byte*, int, amd64_siginfo_fixup_mode)’ [-fpermissive]
int amd64_linux_siginfo_fixup_common (siginfo_t *native, gdb_byte *inf,
^
/home/emaisin/src/binutils-gdb/gdb/gdbserver/linux-x86-low.c:698:20: error: invalid conversion from ‘void*’ to ‘gdb_byte* {aka unsigned char*}’ [-fpermissive]
FIXUP_X32);
^
In file included from /home/emaisin/src/binutils-gdb/gdb/gdbserver/linux-x86-low.c:31:0:
/home/emaisin/src/binutils-gdb/gdb/gdbserver/../nat/amd64-linux-siginfo.h:52:5: error: initializing argument 2 of ‘int amd64_linux_siginfo_fixup_common(siginfo_t*, gdb_byte*, int, amd64_siginfo_fixup_mode)’ [-fpermissive]
int amd64_linux_siginfo_fixup_common (siginfo_t *native, gdb_byte *inf,
^
gdb/gdbserver/ChangeLog:
* linux-aarch64-low.c (aarch64_linux_siginfo_fixup): Change
void * to gdb_byte *.
* linux-low.c (siginfo_fixup): Likewise.
(linux_xfer_siginfo): Likewise.
* linux-low.h (struct linux_target_ops) <siginfo_fixup>:
Likewise.
* linux-x86-low.c (x86_siginfo_fixup): Likewise.
Add a cast to reinterpret a void* as a gdb_byte*.
2016-02-09 Walfred Tedeschi <walfred.tedeschi@intel.com>
gdb/gdbserver/ChangeLog:
* linux-x86-low.c (x86_siginfo_fixup): Add cast to gdb_byte*.
For a forthcoming patch, I need a "skip_to_colon" function. I noticed
there are two skip_to_semicolon (one in gdb and one in gdbserver). I
thought we could put it in common/, and generalize it for any character.
It turns out that the strchrnul function does exactly that. I imported
the corresponding module from gnulib, for those systems that do not have
it.
There are probably more places where this function can be used instead
of doing the work by hand (I am looking at
remote-utils.c::look_up_one_symbol).
gdb/ChangeLog:
* remote.c (skip_to_semicolon): Remove.
(remote_parse_stop_reply): Use strchrnul instead of
skip_to_semicolon.
* gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add
strchrnul.
* gnulib/aclocal.m4: Regenerate.
* gnulib/config.in: Regenerate.
* gnulib/configure: Regenerate.
* gnulib/import/Makefile.am: Regenerate.
* gnulib/import/Makefile.in: Regenerate.
* gnulib/import/m4/gnulib-cache.m4: Regenerate.
* gnulib/import/m4/gnulib-comp.m4: Regenerate.
* gnulib/import/m4/rawmemchr.m4: New file.
* gnulib/import/m4/strchrnul.m4: New file.
* gnulib/import/rawmemchr.c: New file.
* gnulib/import/rawmemchr.valgrind: New file.
* gnulib/import/strchrnul.c: New file.
* gnulib/import/strchrnul.valgrind: New file.
gdb/gdbserver/ChangeLog:
* server.c (skip_to_semicolon): Remove.
(process_point_options): Use strchrnul instead of
skip_to_semicolon.
Nowadays, get_next_pcs in linux_target_ops has two parameters PC
and REGCACHE. Parameter PC looks redundant because it can be go
from REGCACHE. The patch is to remove PC from the arguments for
various functions.
gdb:
2016-01-26 Yao Qi <yao.qi@linaro.org>
* arch/arm-get-next-pcs.c (thumb_deal_with_atomic_sequence_raw):
Remove argument pc. Get pc by regcache_read_pc. Callers updated.
(arm_deal_with_atomic_sequence_raw): Likewise.
(thumb_get_next_pcs_raw): Likewise.
(arm_get_next_pcs_raw): Likewise.
(arm_get_next_pcs): Remove argument pc. Callers updated.
* arch/arm-get-next-pcs.h (arm_get_next_pcs): Update declaration.
gdb/gdbserver:
2016-01-26 Yao Qi <yao.qi@linaro.org>
* linux-arm-low.c (arm_gdbserver_get_next_pcs): Remove argument pc.
* linux-low.c (install_software_single_step_breakpoints): Don't
call regcache_read_pc.
* linux-low.h (struct linux_target_ops) <get_next_pcs>: Remove
argument pc.
In install_software_single_step_breakpoints, we've got the regcache
of current_thread, so we don't have to bother get_pc to get pc,
instead we can get pc from regcache directly. Note that the callers
of install_software_single_step_breakpoints have already switched
current_thread to LWP.
Since the pc is got from regcache_read_pc, in the next patch, we can
get pc inside the implementation of *the_low_target.get_next_pcs and
stop passing pc to *the_low_target.get_next_pcs.
gdb/gdbserver:
2016-01-26 Yao Qi <yao.qi@linaro.org>
* linux-low.c (install_software_single_step_breakpoints): Call
regcache_read_pc instead of get_pc.
Nowadays, GDBserver disables async io (by ignoring SIGIO) when process
a serial event, and enables async io (by installing signal handler) when
resume the inferior and wait. GDBserver may miss SIGIO (by interrupt)
and doesn't process SIGIO in time, which is shown by
gdb.base/interrupt-noterm.exp. In the test, GDB sends "continue &" and
then "interrupt". if '\003' arrives at a period between GDBserver
receives vCont;c and enables async io, SIGIO is ignored because signal
handler isn't installed. GDBserver waits for the inferior and can not
notice '\003' until it returns from wait.
This patch changes the code to install SIGIO handler early, but block
and unblock SIGIO as needed. In this way, we don't remove SIGIO
handler, so SIGIO can't be ignored. However, GDBserver needs to
remove the signal handler when connection is closed.
gdb/gdbserver:
2016-01-26 Yao Qi <yao.qi@linaro.org>
* remote-utils.c (remote_close) [!USE_WIN32API]: Ignore SIGIO.
(unblock_async_io): Rename to ...
(block_unblock_async_io): ... it. New function.
(enable_async_io): Don't install SIGIO handler. Unblock it
instead.
(disable_async_io): Don't ignore SIGIO. Block it instead.
(initialize_async_io): Install SIGIO handler. Don't call
unblock_async_io.
GDBserver may read some packet together with '\003' in one go. We've
already checked '\003' first when reading packet by my patch,
Check input interrupt first when reading packet
https://sourceware.org/ml/gdb-patches/2016-01/msg00057.html
but if we don't check '\003' *after* each packet, the interrupt will
be processed next time GDBserver reads from the buffer, so that the
interrupt isn't processed in time. For example, GDB sends vCont;c and
interrupt (see gdb.base/interrupt-noterm.exp), we'll resume the
inferior and wait once packet vCont;c is seen. If we don't check the
interrupt character after vCont;c packet, interrupt character will stay
in the buffer unattended until GDBserver returns from the wait, which
may take a while. Note that since we've read '\003' from file
descriptor, SIGIO signal handler input_interrupt doesn't help either.
This issue can be exposed by hacking the end of getpkt like
@@ -1041,6 +1050,9 @@ getpkt (char *buf)
}
}
+ if (readchar_bufcnt > 0)
+ gdb_assert (*readchar_bufp != '\003');
+
return bp - buf;
}
and this can trigger internal error,
(gdb) PASS: gdb.base/interrupt-noterm.exp: interrupt
Remote connection closed^M
(gdb) FAIL: gdb.base/interrupt-noterm.exp: inferior received SIGINT
Remote debugging from host 10.2.206.40^M
/home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/remote-utils.c:1054: A problem internal to GDBserver has been detected.^M
getpkt: Assertion `*readchar_bufp != '\003'' failed.^M
This patch is to peek the buffer, if it is '\003', consume it and call
*the_target->request_interrupt.
gdb/gdbserver:
2016-01-26 Yao Qi <yao.qi@linaro.org>
* remote-utils.c (getpkt): If the buffer isn't empty, and the
first character is '\003', call *the_target->request_interrupt.
They were added by
PATCH: Multithreaded debugging for gdbserver
https://sourceware.org/ml/gdb-patches/2002-06/msg00157.html
but as a no-op, and the last usage of them was removed by
[gdbserver/RFC/RFA] Implement multiprocess extensions, add linux multiproces support.
https://sourceware.org/ml/gdb-patches/2009-03/msg00667.html
This patch is to remove them.
gdb/gdbserver:
2016-01-25 Yao Qi <yao.qi@linaro.org>
* remote-utils.c (new_thread_notify): Remove.
(dead_thread_notify): Likewise.
* remote-utils.h (new_thread_notify): Remove declaration.
(dead_thread_notify): Likewise.
Missed one message in bd0a71fa16, since it
didn't trigger on s390x or amd64 (fast tracepoint out of range due to
shared library usage), noticed on s390.
Pushed as obvious.
gdb/testsuite/ChangeLog:
* gdb.trace/pending.exp: Fix expected message on continue.
Noticed and tested on 31-bit s390. This bug caused completely broken
fast tracepoints.
gdb/gdbserver/ChangeLog:
* tracepoint.c (write_inferior_data_ptr): Cast to uintptr_t, so that
it works properly on big-endian machines where sizeof (CORE_ADDR)
!= sizeof (void *).
Currently, even when built with --enable-build-with-cxx, gdb uses
CFLAGS instead of CXXFLAGS. This commit fixes it.
CXXFLAGS set in the environment when configure was run is now honored
in the generated gdb/Makefile, and you can also override CXXFLAGS in
the command like at make time, with the usual 'make CXXFLAGS="..."'
Objects built with a C compiler (e.g., gnulib) still honor CFLAGS
instead.
gdb/ChangeLog:
2016-01-21 Pedro Alves <palves@redhat.com>
* Makefile.in (COMPILER_CFLAGS): New.
(CXXFLAGS): Get it from configure.
(INTERNAL_CFLAGS_BASE, INTERNAL_LDFLAGS): Use COMPILER_CFLAGS
instead of CFLAGS.
* build-with-cxx.m4 (GDB_AC_BUILD_WITH_CXX): Set and AC_SUBST
COMPILER_CFLAGS.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2016-01-21 Pedro Alves <palves@redhat.com>
* Makefile.in (COMPILER_CFLAGS, CXXFLAGS): New.
(INTERNAL_CFLAGS_BASE): Use COMPILER_CFLAGS instead of CFLAGS.
* configure: Regenerate.
This patch fixes the following regression introduced by commit d0e59a68
step^M
39 } /* handler */^M
1: x/i $pc^M
=> 0x8740 <handler+80>: sub sp, r11, #0^M
(gdb) step^M
^M
Program received signal SIGSEGV, Segmentation fault.^M
setitimer () at ../sysdeps/unix/syscall-template.S:81^M
81 ../sysdeps/unix/syscall-template.S: No such file or directory.^M
1: x/i $pc^M
=> 0xb6eff9c0 <setitimer>: push {r7}^M
(gdb) FAIL: gdb.base/sigstep.exp: continue to handler, si+advance in handler, step from handler: leave handler
in my test setting, program is compiled in arm mode, but the glibc
is built in thumb mode, so when we do 'step' to step over syscall
instruction svc for SIGRETURN, GDB should set breakpoint for arm mode
in the program, even though the current program in glibc is in thumb
mode. Current GDB doesn't consider the case that the mode of program
SIGRETURN goes to can be different from current program mode.
In fact, GDB has taken care of this arm/thumb mode changes already,
see
/* Copy the value of next pc of sigreturn and rt_sigrturn into PC,
return 1. In addition, set IS_THUMB depending on whether we
will return to ARM or Thumb code. Return 0 if it is not a
rt_sigreturn/sigreturn syscall. */
static int
arm_linux_sigreturn_return_addr (struct frame_info *frame,
unsigned long svc_number,
CORE_ADDR *pc, int *is_thumb)
but in the commit d0e59a68
> - arm_linux_sigreturn_return_addr (frame, svc_number, &return_addr, &is_thumb);
> + if (svc_number == ARM_SIGRETURN || svc_number == ARM_RT_SIGRETURN)
> + next_pc = arm_linux_sigreturn_next_pc (regcache, svc_number);
the IS_THUMB setting is lost, so it is a regression.
gdb:
2016-01-21 Yao Qi <yao.qi@linaro.org>
* arm-linux-tdep.c (arm_linux_sigreturn_next_pc): Add parameter
is_thumb and set it according to CPSR saved on the stack.
(arm_linux_get_next_pcs_syscall_next_pc): Pass is_thumb to
arm_linux_sigreturn_next_pc.
gdb/gdbserver:
2016-01-21 Yao Qi <yao.qi@linaro.org>
* linux-arm-low.c (arm_sigreturn_next_pc): Add parameter
is_thumb and set it according to CPSR saved on the stack.
(get_next_pcs_syscall_next_pc): Pass is_thumb to
arm_sigreturn_next_pc.
This patch is the follow-up of
https://sourceware.org/ml/gdb-patches/2016-01/msg00164.html to provide
linux_{get,set}_pc_64bit functions.
Rebuild GDBserver with tilegx-linux-gcc. Not tested.
I think about pc in Tile-GX a little bit. Looks current Tile-GX
supports debugging 32-bit program (multi-arch), but PC is always
64-bit. See this thread
https://sourceware.org/ml/gdb-patches/2013-02/msg00113.html
and GDBserver reads PC as 64-bit through ptrace. However, if
the inferior is 32-bit, the PC in the target description and
regcache is 32-bit, so only 32-bit contents are sent back GDB.
Anyway, Tile-GX GDBserver may have some problems here, but this
patch doesn't change anything.
gdb/gdbserver:
2016-01-18 Yao Qi <yao.qi@linaro.org>
* linux-low.c (linux_set_pc_64bit): New function.
(linux_get_pc_64bit): New function.
* linux-low.h (linux_set_pc_64bit, linux_get_pc_64bit):
Declare.
* linux-sparc-low.c (debug_threads): Remove declaration.
(sparc_get_pc): Remove.
(the_low_target): Use linux_get_pc_64bit instead of
sparc_get_pc.
* linux-tile-low.c (tile_get_pc, tile_set_pc): Remove.
(the_low_target): Use linux_get_pc_64bit and
linux_set_pc_64bit.
This patch adds a pair of new functions linux_get_pc_32bit and
linux_set_pc_32bit which get and set 32-bit register "pc" from
regcache. This function can be used some targets and these own
$ARCH_{get,set}_pc are replaced by linux_{get,set}_pc_32bit
respectively.
This patch touches many targets, but I only have arm board to
test and no regression. I also rebuilt nios2-linux GDBserver.
If it is right to go, I'll post the 64-bit counterpart later.
gdb/gdbserver:
2016-01-18 Yao Qi <yao.qi@linaro.org>
* linux-arm-low.c (debug_threads): Remove declaration.
(arm_get_pc, arm_set_pc): Remove.
(the_low_target): Use linux_get_pc_32bit and
linux_set_pc_32bit.
* linux-bfin-low.c (bfin_get_pc, bfin_set_pc): Remove.
(the_low_target): Use linux_get_pc_32bit and
linux_set_pc_32bit.
* linux-cris-low.c (debug_threads): Remove declaration.
(cris_get_pc, cris_set_pc,): Remove.
(the_low_target): Use linux_get_pc_32bit and
linux_set_pc_32bit.
* linux-crisv32-low.c (debug_threads): Remove declaration.
(cris_get_pc, cris_set_pc): Remove.
(the_low_target): Use linux_get_pc_32bit and
linux_set_pc_32bit.
* linux-low.c: Include inttypes.h.
(linux_get_pc_32bit, linux_set_pc_32bit): New functions.
* linux-low.h (linux_get_pc_32bit, linux_set_pc_32bit): Declare.
* linux-m32r-low.c (m32r_get_pc, m32r_set_pc): Remove.
(the_low_target): Use linux_get_pc_32bit and
linux_set_pc_32bit.
* linux-m68k-low.c (m68k_get_pc, m68k_set_pc): Remove.
(the_low_target): Use linux_get_pc_32bit and
linux_set_pc_32bit.
* linux-nios2-low.c (nios2_get_pc, nios2_set_pc): Remove.
(the_low_target): Use linux_get_pc_32bit and
linux_set_pc_32bit.
* linux-sh-low.c (sh_get_pc, sh_set_pc): Remove.
(the_low_target): Use linux_get_pc_32bit and
linux_set_pc_32bit.
* linux-xtensa-low.c (xtensa_get_pc, xtensa_set_pc): Remove.
(the_low_target): Use linux_get_pc_32bit and
linux_set_pc_32bit.
This commit fixes nat/linux-namespaces.c to build correctly on
targets without fork.
gdb/ChangeLog:
* nat/linux-namespaces.c (do_fork): New function.
(linux_mntns_get_helper): Use the above.
gdb/gdbserver/ChangeLog:
* configure.ac (AC_FUNC_FORK): New check.
* config.in: Regenerate.
* configure: Likewise.
This patch makes thumb2_breakpoint static. When writing this patch,
I find the only reason we keep thumb2_breakpoint extern is that it
is used as an argument passed to arm_gdbserver_get_next_pcs. However,
field arm_thumb2_breakpoint is only used in a null check in
thumb_get_next_pcs_raw, so I wonder why do need to pass thumb2_breakpoint
to arm_gdbserver_get_next_pcs.
thumb2_breakpoint was added by Daniel Jacobowitz in order to support
single-step IT block
https://sourceware.org/ml/gdb-patches/2010-01/msg00624.html the logic
there was if we have 32-bit thumb-2 breakpoint defined, we can safely
single-step IT block, otherwise, we can't. Daniel didn't want to use
16-bit thumb BKPT instruction, because it triggers even on instruction
which should be executed. Secondly, using 16-bit thumb illegal
instruction on top of 32-bit thumb instruction may break the meaning of
original IT blocks, because the other 16-bit can be regarded as an
instruction. See more explanations from Daniel's kernel patch
http://www.spinics.net/lists/arm-kernel/msg80476.html
Let us back to this patch, GDB/GDBserver can safely single step
IT block if thumb2_breakpoint is defined, but the single step logic
doesn't have to know the thumb-2 breakpoint instruction. Only
breakpoint insertion mechanism decides to use which breakpoint
instruction. In the software single step code, instead of pass
thumb2_breakpoint, we can pass a boolean variable
has_thumb2_breakpoint indicate whether the target has thumb-2
breakpoint defined, which is equivalent to the original code.
Regression tested on arm-linux. No regression.
gdb:
2016-01-14 Yao Qi <yao.qi@linaro.org>
* arch/arm-get-next-pcs.c (arm_get_next_pcs_ctor): Change
argument arm_thumb2_breakpoint to has_thumb2_breakpoint.
(thumb_get_next_pcs_raw): Check has_thumb2_breakpoint
instead.
* arch/arm-get-next-pcs.h (struct arm_get_next_pcs)
<arm_thumb2_breakpoint>: Remove.
<has_thumb2_breakpoint>: New field.
(arm_get_next_pcs_ctor): Update declaration.
* arm-linux-tdep.c (arm_linux_software_single_step): Pass
1 to arm_get_next_pcs_ctor.
* arm-tdep.c (arm_software_single_step): Pass 0 to
arm_get_next_pcs_ctor.
gdb/gdbserver:
2016-01-14 Yao Qi <yao.qi@linaro.org>
* linux-aarch32-low.c (thumb2_breakpoint): Make it static.
* linux-aarch32-low.h (thumb2_breakpoint): Remove declaration.
* linux-arm-low.c (arm_gdbserver_get_next_pcs): Pass 1 to
arm_get_next_pcs_ctor.
This adds a new QCatchSyscalls packet to enable 'catch syscall', and new
stop reasons "syscall_entry" and "syscall_return" for those events. It
is currently only supported on Linux x86 and x86_64.
gdb/ChangeLog:
2016-01-12 Josh Stone <jistone@redhat.com>
Philippe Waroquiers <philippe.waroquiers@skynet.be>
* NEWS (Changes since GDB 7.10): Mention QCatchSyscalls and the
syscall_entry and syscall_return stop reasons. Mention GDB
support for remote catch syscall.
* remote.c (PACKET_QCatchSyscalls): New enum.
(remote_set_syscall_catchpoint): New function.
(remote_protocol_features): New element for QCatchSyscalls.
(remote_parse_stop_reply): Parse syscall_entry/return stops.
(init_remote_ops): Install remote_set_syscall_catchpoint.
(_initialize_remote): Config QCatchSyscalls.
* linux-nat.h (struct lwp_info) <syscall_state>: Comment typo.
gdb/doc/ChangeLog:
2016-01-12 Josh Stone <jistone@redhat.com>
Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.texinfo (Remote Configuration): List the QCatchSyscalls packet.
(Stop Reply Packets): List the syscall entry and return stop reasons.
(General Query Packets): Describe QCatchSyscalls, and add it to the
table and the detailed list of stub features.
gdb/gdbserver/ChangeLog:
2016-01-12 Josh Stone <jistone@redhat.com>
Philippe Waroquiers <philippe.waroquiers@skynet.be>
* inferiors.h: Include "gdb_vecs.h".
(struct process_info): Add syscalls_to_catch.
* inferiors.c (remove_process): Free syscalls_to_catch.
* remote-utils.c (prepare_resume_reply): Report syscall_entry and
syscall_return stops.
* server.h (UNKNOWN_SYSCALL, ANY_SYSCALL): Define.
* server.c (handle_general_set): Handle QCatchSyscalls.
(handle_query): Report support for QCatchSyscalls.
* target.h (struct target_ops): Add supports_catch_syscall.
(target_supports_catch_syscall): New macro.
* linux-low.h (struct linux_target_ops): Add get_syscall_trapinfo.
(struct lwp_info): Add syscall_state.
* linux-low.c (handle_extended_wait): Mark syscall_state as an entry.
Maintain syscall_state and syscalls_to_catch across exec.
(get_syscall_trapinfo): New function, proxy to the_low_target.
(linux_low_ptrace_options): Enable PTRACE_O_TRACESYSGOOD.
(linux_low_filter_event): Toggle syscall_state entry/return for
syscall traps, and set it ignored for all others.
(gdb_catching_syscalls_p): New function.
(gdb_catch_this_syscall_p): New function.
(linux_wait_1): Handle SYSCALL_SIGTRAP.
(linux_resume_one_lwp_throw): Add PTRACE_SYSCALL possibility.
(linux_supports_catch_syscall): New function.
(linux_target_ops): Install it.
* linux-x86-low.c (x86_get_syscall_trapinfo): New function.
(the_low_target): Install it.
gdb/testsuite/ChangeLog:
2016-01-12 Josh Stone <jistone@redhat.com>
Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/catch-syscall.c (do_execve): New variable.
(main): Conditionally trigger an execve.
* gdb.base/catch-syscall.exp: Enable testing for remote targets.
(test_catch_syscall_execve): New, check entry/return across execve.
(do_syscall_tests): Call test_catch_syscall_execve.
We need to use -Wno-missing-prototypes for now as much of the code
sticks externs in local files and not in common headers.
2016-01-11 Mike Frysinger <vapier@gentoo.org>
* acinclude.m4: Include new ../warning.m4 file.
* configure: Regenerated.
* configure.ac: Replace all warning logic with AM_GDB_WARNINGS.
The GNU Coding Standards say:
"Please do not include any trademark acknowledgements in GNU
software packages or documentation."
gdb/ChangeLog:
2016-01-12 Pedro Alves <palves@redhat.com>
Remove use of the registered trademark symbol throughout.
gdb/gdbserver/ChangeLog:
2016-01-12 Pedro Alves <palves@redhat.com>
Remove use of the registered trademark symbol throughout.
gdb/doc/ChangeLog:
2016-01-12 Pedro Alves <palves@redhat.com>
Remove use of the registered trademark symbol throughout.
Hi,
I see timeout in one of several runs of random-signal.exp like this,
$ (set -e; while true; do make check RUNTESTFLAGS="--target_board=native-gdbserver random-signal.exp"; done)
In about every five runs, we can see a fail,
PASS: gdb.base/random-signal.exp: continue
^CFAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
after some investigation, I find '\003' may be discarded by GDBserver when
it is expecting '$'. In GDB side, both normal packets and '\003' are sent
via function send, but GDBserver may receive them at any time, that is to
say, in the receive buffer in GDBserver, '\003' may appear before or after
normal packet. However, current GDBserver doesn't handle this case.
With this patch applied, I don't see this fail in multiple runs.
Although there is still timeout fail, that is a different problem, the
next patch will fix it.
gdb/gdbserver:
2016-01-08 Yao Qi <yao.qi@linaro.org>
* remote-utils.c (getpkt): If c is '\003', call target hook
request_interrupt.
This patch fixes gcc warning when build ARM GDBserver and AArch64
GDBserver,
AArch64 GDBserver:
gdb/gdbserver/linux-aarch32-low.h:36:29: error: 'thumb2_breakpoint' defined but not used [-Werror=unused-const-variable]
static const unsigned short thumb2_breakpoint[] = { 0xf7f0, 0xa000 };
^
gdb/gdbserver/linux-aarch32-low.h:34:29: error: 'thumb_breakpoint' defined but not used [-Werror=unused-const-variable]
static const unsigned short thumb_breakpoint = 0xde01;
^
gdb/gdbserver/linux-aarch32-low.h:28:28: error: 'arm_breakpoint' defined but not used [-Werror=unused-const-variable]
static const unsigned long arm_breakpoint = arm_eabi_breakpoint;
^
cc1: all warnings being treated as errors
ARM GDBserver:
gdb/gdbserver/linux-aarch32-low.h:34:29: error: 'thumb_breakpoint' defined but not used [-Werror=unused-const-variable]
static const unsigned short thumb_breakpoint = 0xde01;
^~~~~~~~~~~~~~~~
gdb/gdbserver/linux-aarch32-low.h:28:28: error: 'arm_breakpoint' defined but not used [-Werror=unused-const-variable]
static const unsigned long arm_breakpoint = arm_eabi_breakpoint;
^~~~~~~~~~~~~~
by simply moving these macros and variables to
linux-aarch32-low.c and only declare thumb2_breakpoint in
linux-aarch32-low.h, which is not perfect, and reveals some issues
in recent arm GDBserver software single step changes. I'll post
follow-up patches.
gdb/gdbserver:
2016-01-06 Yao Qi <yao.qi@linaro.org>
* linux-aarch32-low.h (arm_abi_breakpoint): Move to
linux-aarch32-low.c.
(arm_eabi_breakpoint, arm_breakpoint): Likewise.
(arm_breakpoint_len, thumb_breakpoint_len): Likewise.
(thumb2_breakpoint, thumb2_breakpoint_len): Likewise.
(thumb2_breakpoint): Declare.
* linux-aarch32-low.c (arm_abi_breakpoint): Moved from
linux-aarch32-low.h.
(arm_eabi_breakpoint, arm_breakpoint): Likewise.
(arm_breakpoint_len, thumb_breakpoint_len): Likewise.
(thumb2_breakpoint, thumb2_breakpoint_len): Likewise.
gdb/ChangeLog:
* top.c (print_gdb_version): Change copyright year in version
message.
gdb/gdbserver/ChangeLog:
* gdbreplay.c (gdbreplay_version): Change copyright year in
version message.
* server.c (gdbserver_version): Likewise.
Tested on x86_64-pc-linux-gnu native-gdbserver, no new regressions.
gdb/gdbserver/ChangeLog:
* server.c (crc32_table): Delete.
(crc32): Use libiberty's xcrc32 function.
With any program under GDBserver control on LynxOS, killing
the program from the debugger (using the "kill" command) causes
GDBserver to properly kill the inferior but GDBserver then hangs.
This change of behavior occured after the following change was
applied:
commit f0ea042932e6922c90df3fd0001497d287b97677
Date: Mon Nov 30 16:05:27 2015 +0000
Subject: gdbserver: don't exit until GDB disconnects
One of the changes introduced by the commit above is that
process_serial_event no longer calls exit after handling
the vKill packet. Instead, what happens is that we wait
until captured_main finds that we no longer have any inferior
to debug, at which point it throws_quit. This (normal) exception
is then expected to propagate all the way to the exception handle
in function "main", which calls exit.
However, before the exception gets propagated, the cleanups
are first executed, and one of the cleanups in question is
detach_or_kill_for_exit_cleanup, which was put in place by
captured_main. detach_or_kill_for_exit_cleanup is basically
a wrapper around detach_or_kill_for_exit, which iterates
over all inferiors, and kills them all.
In our case, we have only one inferior, which we have already
killed during the handling for the "vKill" packet. Unfortunately,
we did not properly clean our internal data for that inferior up,
and so detach_or_kill_for_exit thinks that we still have one inferior,
and therefore tries to kill it. This results in lynx_kill being
called, doing the following:
lynx_ptrace (PTRACE_KILL, ptid, 0, 0, 0);
lynx_wait (ptid, &status, 0);
the_target->mourn (process);
The hang is caused by the call to lynx_wait, which waits for
an event from a process which does not exist...
This patch fixes the issue by enhancing lynx_mourn to clean
the threads and process list up.
gdb/gdbserver/ChangeLog:
* lynx-low.c (lynx_delete_thread_callback): New function.
(lynx_mourn): Properly delete our process and all of its
threads. Remove call to clear_inferiors.
Connecting GDB to a LynxOS-178 GDBserver causes GDBserver to crash:
% gdbserver :4444 simple_main
Process simple_main created; pid = 19
Listening on port 4444
Remote debugging from host 205.232.38.10
Segmentation fault (core dumped)
The crash happens in thread_search_callback where the function
calls the_target->thread_stopped (via the thread_stopped macro)
without verifying whether the callback is NULL or not.
For the record, the regression was introduced by:
commit a67a9faef0
Date: Mon Nov 30 16:05:26 2015 +0000
Subject: gdbserver:prepare_access_memory: pick another thread
This patch avoids the crash by checking the value of the callback
first, before calling it.
gdb/gdbserver/ChangeLog:
* target.c (thread_search_callback): Add check that
the thread_stopped target callback is not NULL before
calling it.
This patch is to get b37a6290 back again, which was removed by
d9311bfa by mistake.
gdb/gdbserver:
2015-12-21 Yao Qi <yao.qi@linaro.org>
* linux-aarch32-low.h [__aarch64__]: Use arm_abi_breakpoint
arm breakpoint.
This patch enables support for conditional breakpoints if the target supports
software single step.
This was disabled before as the implementations of software single step were too
simple as discussed in
https://sourceware.org/ml/gdb-patches/2015-04/msg01110.html.
Since these issues are now fixed support can be added back.
New tests passing :
PASS: gdb.base/cond-eval-mode.exp: set breakpoint condition-evaluation
target and related...
No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/gdbserver/ChangeLog:
* server.c (handle_query): Call target_supports_software_single_step.
This patch enables software single stepping if the targets support it,
to do while-stepping actions.
No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/gdbserver/ChangeLog:
* linux-low.c (single_step): New function.
(linux_resume_one_lwp_throw): Call single_step.
(start_step_over): Likewise.
This patch teaches GDBServer how to software single step on ARM
linux by sharing code with GDB.
The arm_get_next_pcs function in GDB is now shared with GDBServer. So
that GDBServer can use the function to return the possible addresses of
the next PC.
A proper shared context was also needed so that we could share the code,
this context is described in the arm_get_next_pcs structure.
Testing :
No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/ChangeLog:
* Makefile.in (ALL_TARGET_OBS): Append arm-get-next-pcs.o,
arm-linux.o.
(ALLDEPFILES): Append arm-get-next-pcs.c, arm-linux.c
(arm-linux.o): New rule.
(arm-get-next-pcs.o): New rule.
* arch/arm-get-next-pcs.c: New file.
* arch/arm-get-next-pcs.h: New file.
* arch/arm-linux.h: New file.
* arch/arm-linux.c: New file.
* arm.c: Include common-regcache.c.
(thumb_advance_itstate): Moved from arm-tdep.c.
(arm_instruction_changes_pc): Likewise.
(thumb_instruction_changes_pc): Likewise.
(thumb2_instruction_changes_pc): Likewise.
(shifted_reg_val): Likewise.
* arm.h (submask): Move macro from arm-tdep.h
(bit): Likewise.
(bits): Likewise.
(sbits): Likewise.
(BranchDest): Likewise.
(thumb_advance_itstate): Moved declaration from arm-tdep.h
(arm_instruction_changes_pc): Likewise.
(thumb_instruction_changes_pc): Likewise.
(thumb2_instruction_changes_pc): Likewise.
(shifted_reg_val): Likewise.
* arm-linux-tdep.c: Include arch/arm.h, arch/arm-get-next-pcs.h
arch/arm-linux.h.
(arm_linux_get_next_pcs_ops): New struct.
(ARM_SIGCONTEXT_R0, ARM_UCONTEXT_SIGCONTEXT,
ARM_OLD_RT_SIGFRAME_SIGINFO, ARM_OLD_RT_SIGFRAME_UCONTEXT,
ARM_NEW_RT_SIGFRAME_UCONTEXT, ARM_NEW_SIGFRAME_MAGIC): Move stack
layout defines to arch/arm-linux.h.
(arm_linux_sigreturn_next_pc_offset): Move to arch/arm-linux.c.
(arm_linux_software_single_step): Adjust for arm_get_next_pcs
implementation.
* arm-tdep.c: Include arch/arm-get-next-pcs.h.
(arm_get_next_pcs_ops): New struct.
(submask): Move macro to arm.h.
(bit): Likewise.
(bits): Likewise.
(sbits): Likewise.
(BranchDest): Likewise.
(thumb_instruction_changes_pc): Move to arm.c
(thumb2_instruction_changes_pc): Likewise.
(arm_instruction_changes_pc): Likewise.
(shifted_reg_val): Likewise.
(thumb_advance_itstate): Likewise.
(thumb_get_next_pc_raw): Move to arm-get-next-pcs.c.
(arm_get_next_pc_raw): Likewise.
(arm_get_next_pc): Likewise.
(thumb_deal_with_atomic_sequence_raw): Likewise.
(arm_deal_with_atomic_sequence_raw): Likewise.
(arm_deal_with_atomic_sequence): Likewise.
(arm_get_next_pcs_read_memory_unsigned_integer): New function.
(arm_get_next_pcs_addr_bits_remove): Likewise.
(arm_get_next_pcs_syscall_next_pc): Likewise.
(arm_get_next_pcs_is_thumb): Likewise.
(arm_software_single_step): Adjust for arm_get_next_pcs
implementation.
* arm-tdep.h: (arm_get_next_pc): Remove declaration.
(arm_get_next_pcs_read_memory_unsigned_integer):
New declaration.
(arm_get_next_pcs_addr_bits_remove): Likewise.
(arm_get_next_pcs_syscall_next_pc): Likewise.
(arm_get_next_pcs_is_thumb): Likewise.
(arm_deal_with_atomic_sequence: Remove declaration.
* common/gdb_vecs.h: Add CORE_ADDR vector definition.
* configure.tgt (aarch64*-*-linux): Add arm-get-next-pcs.o,
arm-linux.o.
(arm*-wince-pe): Add arm-get-next-pcs.o.
(arm*-*-linux*): Add arm-get-next-pcs.o, arm-linux.o,
arm-get-next-pcs.o
(arm*-*-netbsd*,arm*-*-knetbsd*-gnu): Add arm-get-next-pcs.o.
(arm*-*-openbsd*): Likewise.
(arm*-*-symbianelf*): Likewise.
(arm*-*-*): Likewise.
* symtab.h: Move CORE_ADDR vector definition to gdb_vecs.h.
gdb/gdbserver/ChangeLog:
* Makefile.in (SFILES): Append arch/arm-linux.c,
arch/arm-get-next-pcs.c.
(arm-linux.o): New rule.
(arm-get-next-pcs.o): New rule.
* configure.srv (arm*-*-linux*): Add arm-get-next-pcs.o,
arm-linux.o.
* linux-aarch32-low.c (arm_abi_breakpoint): Remove macro. Moved
to linux-aarch32-low.c.
(arm_eabi_breakpoint, arm_breakpoint): Likewise.
(arm_breakpoint_len, thumb_breakpoint): Likewise.
(thumb_breakpoint_len, thumb2_breakpoint): Likewise.
(thumb2_breakpoint_len): Likewise.
(arm_is_thumb_mode): Make non-static.
* linux-aarch32-low.h (arm_abi_breakpoint): New macro. Moved
from linux-aarch32-low.c.
(arm_eabi_breakpoint, arm_breakpoint): Likewise.
(arm_breakpoint_len, thumb_breakpoint): Likewise.
(thumb_breakpoint_len, thumb2_breakpoint): Likewise.
(thumb2_breakpoint_len): Likewise.
(arm_is_thumb_mode): New declaration.
* linux-arm-low.c: Include arch/arm-linux.h
aarch/arm-get-next-pcs.h, sys/syscall.h.
(get_next_pcs_ops): New struct.
(get_next_pcs_addr_bits_remove): New function.
(get_next_pcs_is_thumb): New function.
(get_next_pcs_read_memory_unsigned_integer): Likewise.
(arm_sigreturn_next_pc): Likewise.
(get_next_pcs_syscall_next_pc): Likewise.
(arm_gdbserver_get_next_pcs): Likewise.
(struct linux_target_ops) <arm_gdbserver_get_next_pcs>:
Initialize.
* linux-low.h: Move CORE_ADDR vector definition to gdb_vecs.h.
* server.h: Include gdb_vecs.h.
This patch is in preparation for software single step support on ARM in
GDBServer. It adds a new shared function regcache_raw_read_unsigned and
regcache_raw_get_unsigned so that GDB and GDBServer can use the same call
to fetch a raw register into an integer.
No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/ChangeLog:
* Makefile.in (SFILES): Append common/common-regcache.c.
(COMMON_OBS): Append common/common-regcache.o.
(common-regcache.o): New rule.
* common/common-regcache.h (register_status) New enum.
(regcache_raw_read_unsigned): New declaration.
* common/common-regcache.c: New file.
* regcache.h (enum register_status): Move to common-regcache.h.
(regcache_raw_read_unsigned): Likewise.
(regcache_raw_get_unsigned): Likewise.
gdb/gdbserver/ChangeLog:
* Makefile.in (SFILES): Append common/common-regcache.c.
(OBS): Append common-regcache.o.
(common-regcache.o): New rule.
* regcache.c (init_register_cache): Initialize cache to
REG_UNAVAILABLE.
(regcache_raw_read_unsigned): New function.
* regcache.h (REG_UNAVAILABLE, REG_VALID): Replaced by shared
register_status enum.
This patch in preparation for software single step support on ARM. It refactors
breakpoint_reinsert_addr into get_next_pcs so that multiple location can be
returned.
When software single stepping there can be multiple possible next addresses
because we're stepping over a conditional branch instruction, for example.
The operation get_next_pcs handles that by returning a vector of all the
possible next addresses.
Software breakpoints are installed at each location returned.
No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/gdbserver/ChangeLog:
* linux-aarch64-low.c (the_low_targets): Rename
breakpoint_reinsert_addr to get_next_pcs.
* linux-arm-low.c (the_low_targets): Likewise.
* linux-bfin-low.c (the_low_targets): Likewise.
* linux-cris-low.c (the_low_targets): Likewise.
* linux-crisv32-low.c (the_low_targets): Likewise.
* linux-low.c (can_software_single_step): Likewise.
(install_software_single_step_breakpoints): New function.
(start_step_over): Use install_software_single_step_breakpoints.
* linux-low.h: New CORE_ADDR vector.
(struct linux_target_ops) Rename breakpoint_reinsert_addr to
get_next_pcs.
* linux-mips-low.c (the_low_targets): Likewise.
* linux-nios2-low.c (the_low_targets): Likewise.
* linux-sparc-low.c (the_low_targets): Likewise.
Since we now rely on PTRACE_EVENT_CLONE being available (added in
Linux 2.5.46), we're relying on NPTL.
This commit removes the support for older LinuxThreads, as well as the
workarounds for vendor 2.4 kernels with NPTL backported.
- Rely on tkill being available.
- Assume gdb doesn't get cancel signals.
- Remove code that checks the LinuxThreads restart and cancel signals
in the inferior.
- Assume that __WALL is available.
- Assume that non-leader threads report WIFEXITED.
- Thus, no longer need to send signal 0 to check whether threads are
still alive.
- Update comments throughout.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/ChangeLog:
* configure.ac: Remove tkill checks.
* configure, config.in: Regenerate.
* linux-nat.c: Remove HAVE_TKILL_SYSCALL check. Update top level
comments.
(linux_nat_post_attach_wait): Remove 'cloned' parameter. Use
__WALL.
(attach_proc_task_lwp_callback): Don't set the cloned flag.
(linux_nat_attach): Adjust.
(kill_lwp): Remove HAVE_TKILL_SYSCALL check. No longer fall back
to 'kill'.
(linux_handle_extended_wait): Use __WALL. Don't set the cloned
flag.
(wait_lwp): Use __WALL. Update comments.
(running_callback, stop_and_resume_callback): Delete.
(linux_nat_filter_event): Don't stop and resume all lwps. Don't
check if the event LWP has previously exited.
(check_zombie_leaders): Update comments.
(linux_nat_wait_1): Use __WALL.
(kill_wait_callback): Don't handle clone processes separately.
Use __WALL instead.
(linux_thread_alive): Delete.
(linux_nat_thread_alive): Return true as long as the LWP is in the
LWP list.
(linux_nat_update_thread_list): Assume the kernel supports
PTRACE_EVENT_CLONE.
(get_signo): Delete.
(lin_thread_get_thread_signals): Remove LinuxThreads references.
No longer check __pthread_sig_restart / __pthread_sig_cancel in
the inferior.
* linux-nat.h (struct lwp_info) <cloned>: Delete field.
* linux-thread-db.c: Update comments.
(_initialize_thread_db): Remove LinuxThreads references.
* nat/linux-waitpid.c (my_waitpid): No longer emulate __WALL.
Pass down flags unmodified.
* linux-waitpid.h (my_waitpid): Update documentation.
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_kill_one_lwp): Remove references to
LinuxThreads.
(kill_lwp): Remove HAVE_TKILL_SYSCALL check. No longer fall back
to 'kill'.
(linux_init_signals): Delete.
(initialize_low): Adjust.
* thread-db.c (thread_db_init): Remove LinuxThreads reference.
Ref: https://sourceware.org/ml/gdb/2015-12/msg00024.html
We have code in configure.ac that tries to detect whether the compiler
supports each warning and suppress it if not, but that doesn't work
with "-Wno-" options, because gcc doesn't error out for
-Wno-unknown-warning unless other diagnostics are being produced.
See https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html.
Handle this by checking whether -Wfoo works when we actually want
-Wno-foo.
gdb/ChangeLog:
2015-12-16 Pedro Alves <palves@redhat.com>
* configure.ac (compiler warning flags): When testing a
-Wno-foo option, check whether -Wfoo works instead.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2015-12-16 Pedro Alves <palves@redhat.com>
* configure.ac (compiler warning flags): When testing a
-Wno-foo option, check whether -Wfoo works instead.
* configure: Regenerate.
This patch implements support for fork and exec events with target remote
mode Linux targets. For such targets with Linux kernels 2.5.46 and later,
this enables follow-fork-mode, detach-on-fork and fork and exec
catchpoints.
The changes required to implement this included:
* Don't exit from gdbserver if there are still active inferiors.
* Allow changing the active process in remote mode.
* Enable fork and exec events in remote mode.
* Print "Ending remote debugging" only when disconnecting.
* Combine remote_kill and extended_remote_kill into a single function
that can handle the multiple inferior case for target remote. Also,
the same thing for remote_mourn and extended_remote_mourn.
* Enable process-style ptids in target remote.
* Remove restriction on multiprocess mode in target remote.
gdb/gdbserver/ChangeLog:
* server.c (process_serial_event): Don't exit from gdbserver
in remote mode if there are still active inferiors.
gdb/ChangeLog:
* inferior.c (number_of_live_inferiors): New function.
(have_live_inferiors): Use number_of_live_inferiors in place
of duplicate code.
* inferior.h (number_of_live_inferiors): Declare new function.
* remote.c (set_general_process): Remove restriction on target
remote mode.
(remote_query_supported): Likewise.
(remote_detach_1): Exit in target remote mode only when there
is just one live inferior left.
(remote_disconnect): Unpush the target directly instead of
calling remote_mourn.
(remote_kill): Rewrite function to handle both target remote
and extended-remote. Call remote_kill_k.
(remote_kill_k): New function.
(extended_remote_kill): Delete function.
(remote_mourn, extended_remote_mourn): Combine functions into
one, remote_mourn, and enable extended functionality for target
remote.
(remote_pid_to_str): Enable "process" style ptid string for
target remote.
(remote_supports_multi_process): Remove restriction on target
remote mode.
AArch64 GDBserver can debug ARM program, and it should recognize
various arm breakpoint instructions. This patch should be included
in 17b1509a.
gdb/gdbserver:
2015-12-11 Yao Qi <yao.qi@linaro.org>
* linux-aarch64-low.c (aarch64_breakpoint_at): Call
arm_breakpoint_at if the process is 32-bit.
Nowdays, GDBserver chooses arm breakpoint instructions by checking
macro __ARM_EABI__. When aarch64 GDBserver debugs arm program,
arm_eabi_breakpoint is still needed, but __ARM_EABI__ isn't defined
in aarch64 compiler. This causes GDBserver chooses the wrong
breakpoint instruction for arm program. This patch fixes it.
gdb/gdbserver:
2015-12-11 Yao Qi <yao.qi@linaro.org>
* linux-aarch32-low.c [__aarch64__]: Use arm_abi_breakpoint
arm breakpoint.
In commit 6085d6f6, Z0 packet is disabled in aarch64 GDBserver if
the inferior is 32-bit or there may be multiple inferiors, because
Z0 packet isn't supported for arm then. Recently, Z0 packet
is supported in arm target, so we don't have such limitation in
aarch64 GDBserver, that is to say, aarch64 GDBserver can use Z0
packet in multi-arch/multi-inferior debugging when the inferior's
arch is arm.
Part of this patch is to revert 6085d6f6, and the rest of the patch
is to move some breakpoint related arm_* functions into
linux-aarch32-low.c in order to share them between arm and aarch64.
This patch is regression tested on aarch64-linux for debugging both
aarch64 programs and arm programs respectively.
gdb/gdbserver:
2015-12-07 Yao Qi <yao.qi@linaro.org>
* configure.srv: Append arm.o to srv_tgtobj for
aarch64*-*-linux* target.
* linux-aarch32-low.c (arm_abi_breakpoint): New macro. Moved
from linux-arm-low.c.
(arm_eabi_breakpoint, arm_breakpoint): Likewise.
(arm_breakpoint_len, thumb_breakpoint): Likewise.
(thumb_breakpoint_len, thumb2_breakpoint): Likewise.
(thumb2_breakpoint_len): Likewise.
(arm_is_thumb_mode, arm_breakpoint_at): Likewise.
(arm_breakpoint_kinds): Likewise.
(arm_breakpoint_kind_from_pc): Likewise.
(arm_sw_breakpoint_from_kind): Likewise.
(arm_breakpoint_kind_from_current_state): Likewise.
* linux-aarch32-low.h (arm_breakpoint_kind_from_pc): Declare.
(arm_sw_breakpoint_from_kind): Declare.
(arm_breakpoint_kind_from_current_state): Declare.
(arm_breakpoint_at): Declare.
* linux-aarch64-low.c (aarch64_sw_breakpoint_from_kind): Call
arm_sw_breakpoint_from_kind if process is 32-bit.
(aarch64_breakpoint_kind_from_pc): New function.
(aarch64_breakpoint_kind_from_current_state): New function.
(the_low_target): Initialize fields breakpoint_kind_from_pc
and breakpoint_kind_from_current_state.
* linux-arm-low.c (arm_breakpoint_kinds): Move to
linux-aarch32-low.c.
(arm_abi_breakpoint, arm_eabi_breakpoint): Likewise.
(arm_breakpoint, arm_breakpoint_len): Likewise.
(thumb_breakpoint, thumb_breakpoint_len): Likewise.
(thumb2_breakpoint, thumb2_breakpoint_len): Likewise.
(arm_is_thumb_mode): Likewise.
(arm_breakpoint_at): Likewise.
(arm_breakpoint_kind_from_pc): Likewise.
(arm_sw_breakpoint_from_kind): Likewise.
(arm_breakpoint_kind_from_current_state): Likewise.
Revert:
2015-08-04 Yao Qi <yao.qi@linaro.org>
* linux-aarch64-low.c (aarch64_supports_z_point_type): Return
0 for Z_PACKET_SW_BP if it may be used in multi-arch debugging.
* server.c (extended_protocol): Remove "static".
* server.h (extended_protocol): Declare it.
Rename target_ops.arch_setup to .post_create_inferior. In the Linux
hook, continue calling the low arch setup, then also set ptrace flags.
This corrects the possibility of running without flags, demonstrated by
a new test that would fail to catch a fork before.
gdb/gdbserver/ChangeLog:
2015-12-04 Josh Stone <jistone@redhat.com>
* target.h (struct target_ops) <arch_setup>: Rename to ...
(struct target_ops) <post_create_inferior>: ... this.
(target_arch_setup): Rename to ...
(target_post_create_inferior): ... this, calling post_create_inferior.
* server.c (start_inferior): Update target_arch_setup calls to
target_post_create_inferior.
* linux-low.c (linux_low_ptrace_options): Forward declare.
(linux_arch_setup): Update its comment for general use.
(linux_post_create_inferior): New, run arch_setup and setup ptrace.
(struct linux_target_ops): Use linux_post_create_inferior.
* lynx-low.c (struct lynx_target_ops): Update arch_setup stub comment
to post_create_inferior.
* nto-low.c (struct nto_target_ops): Likewise.
* spu-low.c (struct spu_target_ops): Likewise.
* win32-low.c (struct win32_target_ops): Likewise.
gdb/testsuite/ChangeLog:
2015-12-04 Josh Stone <jistone@redhat.com>
* gdb.base/catch-fork-static.exp: New.
A duplicate include arm/arm.h was introduced, remove it.
Pushed as obvious.
gdb/gdbserver/ChangeLog:
* linux-arm-low.c: Remove duplicate arch/arm.h include.
This patch removes too simple implementations of the breakpoint_reinsert_addr
operation.
The only reason to keep them around was to support thread events when
PTRACE_EVENT_CLONE was not present but this support has been removed in a
previous patch.
No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
Also compilation was tested on aarch64, bfin, cris, crisv32,
m32r, mips, nios2, ppc, s390, sparc, tic6x, tile, xtensa.
gdb/gdbserver/ChangeLog:
* linux-arm-low.c (arm_reinsert_addr): Remove function.
(struct linux_target_ops <breakpoint_reinsert_addr>: Set to NULL.
* linux-cris-low.c (cris_reinsert_addr> Remove function.
(struct linux_target_ops) <breakpoint_reinsert_addr>: Set to NULL.
* linux-crisv32-low.c (cris_reinsert_addr): Remove function.
(struct linux_target_ops) <breakpoint_reinsert_addr>: Set to NULL.
* linux-mips-low.c (mips_reinsert_addr): Remove function.
(struct linux_target_ops) <breakpoint_reinsert_addr>: Set to NULL.
* linux-nios2-low.c (nios2_reinsert_addr): Remove function.
(struct linux_target_ops) <breakpoint_reinsert_addr>: Set to NULL.
* linux-sparc-low.c (sparc_reinsert_addr): Remove function.
(struct linux_target_ops) <breakpoint_reinsert_addr>: Set to NULL.
This patch removes support for thread events if PTRACE_EVENT_CLONE is not
supported in GDBServer.
Before, on systems that did not support PTRACE_EVENT_CLONE, both GDB and
GDBServer coordinated with libthread_db.so to insert breakpoints at magic
locations in libpthread.so, in order to break at thread creation and thread
death.
Simple software single stepping support was implemented to step over these
breakpoints in case there was no hardware single stepping support. However,
these simple software single stepping implementations were not fit for any other
use as discussed in :
https://sourceware.org/ml/gdb-patches/2015-04/msg01110.html
These too simple implementations conflict with ongoing work to make proper
implementations of software single stepping in GDBServer.
The problem is that if some implementations are correct and others are not and
only there for the thread magic breakpoint, we can't enable features based
solely software single step support since some would be broken.
To keep the incorrect implementations and allow the new proper ones at the same
time we would need to implement fallback code and it quickly becomes ugly and
confusing with multiple checks for legacy software single step or proper
software single step.
However, PTRACE_EVENT_CLONE was first introduced in Linux 2.5.46,
released in November 2002.
So I think it's reasonable to just remove support for kernels that don't support
PTRACE_EVENT_CLONE, and sidestep the libthread_db breakpoints issues entirely.
This thread on the mailling list discusses the issue :
https://sourceware.org/ml/gdb/2015-10/msg00078.html
No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_look_up_symbols): Don't call
linux_supports_traceclone.
* linux-low.h (thread_db_init): Remove use_events argument.
* thread-db.c (thread_db_use_event): Remove global variable.
(struct thread_db) <td_thr_event_enable_p>: Remove field.
(struct thread_db) <td_create_bp>: Remove field.
(thread_db_create_event): Remove function.
(thread_db_enable_reporting): Likewise.
(find_one_thread): Don't check for thread_db_use_events.
(attach_thread): Likewise.
(thread_db_load_search): Remove td_thr_event_enable_p initialization.
(try_thread_db_load_1): Don't check for thread_db_use_events.
(thread_db_init): Remove use_events argument and thread events
handling.
(remove_thread_event_breakpoints): Remove function.
(thread_db_detach): Remove call to remove_thred_event_breakpoints.
Before this patch there was only one call: can_hardware_single_step. Its
implementation was a check on breakpoint_reinsert_addr if NULL it assumed
that the target could hardware single step.
This patch prepares for the case where this is not true anymore.
In order to improve software single stepping in GDBServer the
breakpoint_reinsert_addr operation of targets that had a very simple
software implementation used only for stepping over thread creation events
will be removed.
This will create a case where a target does not support hardware single
step and has the operation breakpoint_reinsert_addr set to NULL, thus
can_hardware_single_step needs to be implemented another way.
A new target operation supports_hardware_single_step is introduced and is
to return true if the target does support such a feature, support for the
feature is manually hardcoded.
Note that the hardware single step support was enabled as per the current
behavior, I did not check if tile for example really has ptrace singlestep
support but since the current implementation assumed it had, I kept it
that way.
No regressions on Ubuntu 14.04 on ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
Compilation tested on: aarch64,arm,bfind,crisv32,m32r,ppc,s390,tic6x,tile,
xtensa.
Not tested : sh.
gdb/gdbserver/ChangeLog:
* linux-aarch64-low.c (aarch64_supports_hardware_single_step):
New function.
(struct linux_target_ops) <supports_hardware_single_step>: Initialize.
* linux-arm-low.c (arm_supports_hardware_single_step): New function.
(struct linux_target_ops) <supports_hardware_single_step>: Initialize.
* linux-bfin-low.c (bfin_supports_hardware_single_step): New function.
(struct linux_target_ops) <bfin_supports_hardware_single_step>:
Initialize.
* linux-crisv32-low.c (cris_supports_hardware_single_step):
New function.
(struct linux_target_ops) <supports_hardware_single_step>: Initialize.
* linux-low.c (can_hardware_single_step): Use
supports_hardware_single_step.
(can_software_single_step): New function.
(start_step_over): Call can_software_single_step.
(linux_supports_hardware_single_step): New function.
(struct target_ops) <supports_software_single_step>: Initialize.
* linux-low.h (struct linux_target_ops)
<supports_hardware_single_step>: Initialize.
* linux-m32r-low.c (m32r_supports_hardware_single_step): New function.
(struct linux_target_ops) <supports_hardware_single_step>: Initialize.
* linux-ppc-low.c (ppc_supports_hardware_single_step): New function.
(struct linux_target_ops) <supports_hardware_single_step> Initialize.
* linux-s390-low.c (s390_supports_hardware_single_step): New function.
(struct linux_target_ops) <supports_hardware_single_step>: Initialize.
* linux-sh-low.c (sh_supports_hardware_single_step): New function.
(struct linux_target_ops) <supports_hardware_single_step>: Initialize.
* linux-tic6x-low.c (tic6x_supports_hardware_single_step): New function.
(struct linux_target_ops) <tic6x_supports_hardware_single_step>:
Initialize.
* linux-tile-low.c (tile_supports_hardware_single_step): New function.
(struct linux_target_ops) <tile_supports_hardware_single_step>:
Initialize.
* linux-x86-low.c (x86_supports_hardware_single_step) New function.
(struct linux_target_ops) <supports_hardware_single_step>: Initialize.
* linux-xtensa-low.c (xtensa_supports_hardware_single_step):
New function.
(struct linux_target_ops) <supports_hardware_single_step>: Initialize.
* target.h (struct target_ops): <supports_software_single_step>:
New field.
(target_supports_software_single_step): New macro.
Without this patch, when doing a software single step, with for example
a conditional breakpoint, gdbserver would wrongly avance the pc of
breakpoint_len and skips an instruction.
This is due to gdbserver assuming that it's hardware single stepping.
When it resumes from the breakpoint address it expects the trap to be
caused by ptrace and if it's rather caused by a software breakpoint
it assumes this is a permanent breakpoint and that it needs to skip
over it.
However when software single stepping, this breakpoint is legitimate as
it's the reinsert breakpoint gdbserver has put in place to break at
the next instruction. Thus gdbserver wrongly advances the pc and skips
an instruction.
This patch fixes this behavior so that gdbserver checks if it is a
reinsert breakpoint from software single stepping. If it is it won't
advance the pc. And if there's no reinsert breakpoint there we assume
then that it's a permanent breakpoint and advance the pc.
Here's a commented log of what would happen before and after the fix on
gdbserver :
/* Here there is a conditional breakpoint at 0x10428 that needs to be
stepped over. */
Need step over [LWP 11204]? yes, found breakpoint at 0x10428
...
/* e7f001f0 is a breakpoint instruction on arm
Here gdbserver writes the software breakpoint we would like to hit
*/
Writing e7f001f0 to 0x0001042c in process 11204
...
Resuming lwp 11220 (continue, signal 0, stop not expected)
pending reinsert at 0x10428
stop pc is 00010428
continue from pc 0x10428
...
/* Here gdbserver hit the software breakpoint that was in place
for the step over */
stop pc is 0001042c
pc is 0x1042c
step-over for LWP 11220.11220 executed software breakpoint
Finished step over.
Could not find fast tracepoint jump at 0x10428 in list (reinserting).
/* Here gdbserver writes back the original instruction */
Writing e50b3008 to 0x0001042c in process 11220
Step-over finished.
Need step over [LWP 11220]? No
/* Here because gdbserver assumes this is a permenant breakpoint it advances
the pc of breakpoint_len, in this case 4 bytes, so we have just skipped
the instruction that was written back here :
Writing e50b3008 to 0x0001042c in process 11220
*/
stop pc is 00010430
pc is 0x10430
Need step over [LWP 11220]? No, no breakpoint found at 0x10430
Proceeding, no step-over needed
proceed_one_lwp: lwp 11220
stop pc is 00010430
This patch fixes this situation and we get the right behavior :
Writing e50b3008 to 0x0001042c in process 11245
Hit a gdbserver breakpoint.
Hit a gdbserver breakpoint.
Step-over finished.
proceeding all threads.
Need step over [LWP 11245]? No
stop pc is 0001042c
pc is 0x1042c
Need step over [LWP 11245]? No, no breakpoint found at 0x1042c
Proceeding, no step-over needed
proceed_one_lwp: lwp 11245
stop pc is 0001042c
pc is 0x1042c
Resuming lwp 11245 (continue, signal 0, stop not expected)
stop pc is 0001042c
continue from pc 0x1042c
It also works if the value at 0x0001042c is a permanent breakpoint.
If so gdbserver will finish the step over, remove the reinserted breakpoint,
resume at that location and on the next SIGTRAP gdbserver will trigger
the advance PC condition as reinsert_breakpoint_inserted_here will be false.
I also tested this against bp-permanent.exp on arm (with a work in progress
software single step patchset) without any regressions.
It's also tested against x86 bp-permanent.exp without any regression.
So both software and hardware single step are tested.
No regressions on Ubuntu 14.04 on ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_wait_1): Fix pc advance condition.
* mem-break.c (reinsert_breakpoint_inserted_here): New function.
* mem-break.h (reinsert_breakpoint_inserted_here): New declaration.
When manually stepping over a permanent breakpoint on ARM we need to fetch the
right breakpoint size based on the current instruction set used.
Since this is not encoded in the stop_pc, the instruction mode needs to be
fetched from the CPSR register.
This is done by introducing a new target operation called :
breakpoint_kind_from_current_state.
For other targets that do not need this, breakpoint_kind_from_pc is used.
No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/gdbserver/ChangeLog:
* linux-arm-low.c (arm_is_thumb_mode): New function.
(arm_breakpoint_at): Use arm_is_thumb_mode.
(arm_breakpoint_kind_from_current_state): New function.
(struct linux_target_ops) <breakpoint_kind_from_current_state>:
Initialize.
* linux-low.c (linux_wait_1): Call breakpoint_kind_from_current_state.
(linux_breakpoint_kind_from_current_state): New function.
(struct target_ops <breakpoint_kind_from_current_state>: Initialize.
* linux-low.h (struct linux_target_ops)
<breakpoint_kind_from_current_state>: New field.
* target.h (struct target_ops): Likewise.
(target_breakpoint_kind_from_current_state): New macro.
When testing with "target remote" with "maint set target-non-stop on",
we regressions like this:
Running /home/pedro/gdb/mygit/build/../src/gdb/testsuite/gdb.threads/continue-pending-after-query.exp ...
FAIL: gdb.threads/continue-pending-after-query.exp: iter 4: continue until exit
FAIL: gdb.threads/continue-pending-after-query.exp: iter 6: continue until exit
FAIL: gdb.threads/continue-pending-after-query.exp: iter 10: continue until exit
=== gdb Summary ===
# of expected passes 28
# of unexpected failures 3
where gdb.log shows:
continue
Continuing.
Remote communication error. Target disconnected.: Connection reset by peer.
(gdb) FAIL: gdb.threads/continue-pending-after-query.exp: iter 4: continue until exit
Enabling gdb + gdbserver debug logs we see:
gdbserver: <<<< exiting linux_wait_1
gdbserver: handling possible serial event
gdbserver: Writing resume reply for LWP 11089.11089:0
gdbserver: handling possible serial event
gdbserver: GDBserver exiting
GDB: Packet received: OK
GDB: infrun: prepare_to_wait
GDB: Sending packet: $vStopped#55...Packet received: W0;process:2b51
GDB: Sending packet: $vStopped#55...Packet received: OK
GDB: infrun: target_wait (-1.0.0, status) =
GDB: infrun: -1.0.0 [Thread 0],
GDB: infrun: status->kind = no-resumed
GDB: Sending packet: $Hgp2b51.2b51#41...Remote connection closed
(gdb) FAIL: gdb.threads/continue-pending-after-query.exp: iter 1: continue until exit
Notice the "Packet received: W0;process:2b51" followed by
vStopped->OK.
That means the process exit notification was successfully sent to GDB
and GDB fetched it. That makes gdbserver exit, in
server.c:process_serial_event:
if (!extended_protocol && have_ran && !target_running ())
{
/* In non-stop, defer exiting until GDB had a chance to query
the whole vStopped list (until it gets an OK). */
if (QUEUE_is_empty (notif_event_p, notif_stop.queue))
{
/* Be transparent when GDB is connected through stdio -- no
need to spam GDB's console. */
if (!remote_connection_is_stdio ())
fprintf (stderr, "GDBserver exiting\n");
remote_close ();
exit (0);
}
}
However, GDB is still busy processing an earlier "no-resumed" event,
and sends a "Hg" packet, which errors out with "Remote connection
closed". IOW, it's not enough to wait for GDB to query the whole
vStopped list, gdbserver needs to wait until the exit event is really
processed.
The fix is to make gdbserver not disconnect until gdb does.
Tested on x86_64 Fedora, native gdbserver, remote + extended-remote +
with and without "maint set target-non-stop on".
gdb/gdbserver/ChangeLog:
2015-10-14 Pedro Alves <palves@redhat.com>
* remote-utils.c (readchar): Don't print "Got EOF" unless
debugging gdbserver.
* server.c (captured_main): Exit gdbserver if gdb disconnects when
in "target remote" mode and there are no processes left to debug.
(process_serial_event): Remove 'have_ran' static local and remove
logic that exits gdbserver in "target remote" mode.
Running killed-outside.exp in with "maint set target-non-stop on"
hangs currently. This test has the inferior process die with a
SIGKILL while stopped. gdbserver gets a SIGCHLD and reacts by
retrieveing the SIGKILL events out of waitpid. But because the
process is not resumed from GDB's perspective, the event is left
pending. When GDB resumes the process afterwards, the process is not
really resumed because it already has the event pending. But nothing
wakes up the event loop to consume the event.
Handle this in the same way nat/linux-nat.c:linux_nat_resume handles
this.
gdb/gdbserver/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* linux-low.c (linux_resume): Wake up the event loop before
returning.
Say GDB wants to access the inferior process's memory. The current
remote general thread is 3, but GDB's switched to thread 2. Because
both threads are of the same process, GDB skips making the remote
thread be thread 2 as well (sending an Hg packet) before accessing
memory (remote.c:set_general_process). However, if thread 3 has
exited meanwhile, thread 3 no longer exists on the server and
gdbserver points current_thread to NULL. The result is the memory
access fails, even through the process still exists.
Fix this by making prepare_to_access memory select the thread to
access memory through.
gdb/gdbserver/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* mem-break.c (check_gdb_bp_preconditions): Remove current_thread
check.
(set_gdb_breakpoint): If prepare_to_access_memory fails, set *ERR
to -1.
* target.c (struct thread_search): New structure.
(thread_search_callback): New function.
(prev_general_thread): New global.
(prepare_to_access_memory, done_accessing_memory): New functions.
* target.h (prepare_to_access_memory, done_accessing_memory):
Replace macros with function declarations.
Testing with "maint set target-non-stop on" causes regressions in
tests that rely on TARGET_WAITKIND_NO_RESUMED, which isn't modelled on
the RSP. In real all-stop, gdbserver detects the situation and
reporst error to GDB, and so the tests (e.g.,
gdb.threads/no-unwaited-for-left.exp) at fail quickly. But with
"maint set target-non-stop on", GDB instead hangs forever waiting for
a stop reply that never comes, and so the tests take longer to time
out.
This adds a new "N" stop reply packet that maps 1-1 to
TARGET_WAITKIND_NO_RESUMED.
gdb/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
PR 14618
* NEWS (New remote packets): Mention the N stop reply.
* remote.c (remote_protocol_features): Add "no-resumed" entry.
(remote_query_supported): Report no-resumed+ support.
(remote_parse_stop_reply): Handle 'N'.
(process_stop_reply): Handle TARGET_WAITKIND_NO_RESUMED.
(remote_wait_as): Handle 'N' / TARGET_WAITKIND_NO_RESUMED.
(_initialize_remote): Register "set/show remote
no-resumed-stop-reply" commands.
gdb/doc/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
PR 14618
* gdb.texinfo (Stop Reply Packets): Document the N stop reply.
(Remote Configuration): Add the "set/show remote
no-resumed-stop-reply" to the available settings table.
(General Query Packets): Document the "no-resumed" qSupported
feature.
gdb/gdbserver/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
PR 14618
* linux-low.c (linux_wait_1): If the last resumed thread is gone,
report TARGET_WAITKIND_NO_RESUMED.
* remote-utils.c (prepare_resume_reply): Handle
TARGET_WAITKIND_NO_RESUMED.
* server.c (report_no_resumed): New global.
(handle_query) <qSupported>: Handle "no-resumed+". Report
"no-resumed+" support.
(resume): When the target reports TARGET_WAITKIND_NO_RESUMED, only
return error if the client doesn't support no-resumed events.
(push_stop_notification): New function.
(handle_target_event): Use it. Report TARGET_WAITKIND_NO_RESUMED
events if the client supports them.
gdb/testsuite/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* gdb.threads/no-unwaited-for-left.exp: Remove setup_kfail calls.
killed-outside.exp regresses with "maint set target-non-stop on". The
logs show:
(gdb) continue
Continuing.
infrun: clear_proceed_status_thread (Thread 9028.9028)
infrun: proceed (addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT)
infrun: proceed: resuming Thread 9028.9028
Sending packet: $Z0,3615a03966,1#4b... Notification received: Stop:X9;process:2344
Packet received: E01
Sending packet: $Z0,3615a13970,1#47...Packet received: E01
Sending packet: $Z0,3615a14891,1#4a...Packet received: E01
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [Thread 9028.9028] at 0x4005e4
Sending packet: $vCont;c:p2344.2344#1a...Packet received: E.target not running.
Sending packet: $qXfer:threads:read::0,fff#03...Packet received: l<threads>\n</threads>\n
Sending packet: $vStopped#55...Packet received: OK
Unexpected vCont reply in non-stop mode: E.target not running.
(gdb) remote_async_inferior_event_handler
infrun: target_wait (-1.0.0, status) =
infrun: 9028.0.0 [process 9028],
infrun: status->kind = signalled, signal = GDB_SIGNAL_KILL
infrun: TARGET_WAITKIND_SIGNALLED
Program terminated with signal SIGKILL, Killed.
The program no longer exists.
infrun: stop_waiting
infrun: clear_step_over_info
infrun: stop_all_threads
remote_thread_exit_events(1)
Note the "Unexpected vCont reply" error.
I traced it to a problem in status_pending_p_callback. It resumes an
LWP when it shouldn't.
gdb/gdbserver/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* linux-low.c (thread_still_has_status_pending_p): Don't check
vCont;t here.
(lwp_resumed): New function.
(status_pending_p_callback): Return early if the LWP is not
supposed to be resumed.
When testing with "maint set target-non-stop on", a few
threading-related tests expose an issue that requires new RSP packets.
Say there are 3 threads running, 1-3. If GDB tries to stop thread 1,
2 and 3, and then waits for their stops, but meanwhile say, thread 2
exits, GDB hangs forever waiting for a stop for thread 2 that won't
ever happen.
This patch fixes the issue by adding support for thread exit events to
the protocol. However, we don't want these always enabled, as they're
useless most of the time, and would slow down remote debugging. So I
made it so that GDB can enable/disable them, and then made gdb do that
around the cases that need it, which currently is only
infrun.c:stop_all_threads.
In turn, if we have thread exit events, then the extra "thread x
exited" traffic slows down attach-many-short-lived-threads.exp enough
that gdb has trouble keeping up with new threads that are spawned
while gdb tries to stop existing ones. To fix that I added support
for the counterpart thread created events too. Enabling those when we
try to stop threads ensures that new threads never get a chance to
themselves start new threads, killing the race.
gdb/doc/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Remote Configuration): List "set/show remote
thread-events" command in configuration table.
(Stop Reply Packets): Document "T05 create" stop
reason and 'w' stop reply.
(General Query Packets): Document QThreadEvents packet. Document
QThreadEvents qSupported feature.
gdb/gdbserver/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* linux-low.c (handle_extended_wait): Assert that the LWP's
waitstatus is TARGET_WAITKIND_IGNORE. If GDB wants to hear about
thread create events, leave the new child's status pending.
(linux_low_filter_event): If GDB wants to hear about thread exit
events, leave the LWP marked dead and don't delete it.
(linux_wait_for_event_filtered): Don't check for thread exit.
(filter_exit_event): New function.
(linux_wait_1): Use it, when returning an exit event.
(linux_resume_one_lwp_throw): Assert that the LWP's
waitstatus is TARGET_WAITKIND_IGNORE.
* remote-utils.c (prepare_resume_reply): Handle
TARGET_WAITKIND_THREAD_CREATED and TARGET_WAITKIND_THREAD_EXITED.
* server.c (report_thread_events): New global.
(handle_general_set): Handle QThreadEvents.
(handle_query) <qSupported>: Handle and report QThreadEvents+;
(handle_target_event): Handle TARGET_WAITKIND_THREAD_CREATED and
TARGET_WAITKIND_THREAD_EXITED.
* server.h (report_thread_events): Declare.
gdb/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* NEWS (New commands): Mention "set/show remote thread-events"
commands.
(New remote packets): Mention thread created/exited stop reasons
and QThreadEvents packet.
* infrun.c (disable_thread_events): New function.
(stop_all_threads): Disable/enable thread create/exit events.
Handle TARGET_WAITKIND_THREAD_EXITED.
(handle_inferior_event_1): Handle TARGET_WAITKIND_THREAD_CREATED
and TARGET_WAITKIND_THREAD_EXITED.
* remote.c (remove_child_of_pending_fork): Also remove threads of
threads that have TARGET_WAITKIND_THREAD_EXITED events.
(remote_parse_stop_reply): Handle "create" magic register. Handle
'w' stop reply.
(initialize_remote): Install remote_thread_events as
to_thread_events target hook.
(remote_thread_events): New function.
* target-delegates.c: Regenerate.
* target.c (target_thread_events): New function.
* target.h (struct target_ops) <to_thread_events>: New field.
(target_thread_events): Declare.
* target/waitstatus.c (target_waitstatus_to_string): Handle
TARGET_WAITKIND_THREAD_CREATED and TARGET_WAITKIND_THREAD_EXITED.
* target/waitstatus.h (enum target_waitkind)
<TARGET_WAITKIND_THREAD_CREATED, TARGET_WAITKIND_THREAD_EXITED):
New values.
Running attach-many-short-lived-threads.exp with the extended-remote
board with "maint set target-non-stop on" times out -- the attach
never completes. Enabling infrun debug logs, we see that GDB is stuck
stopping all threads:
infrun: target_wait (-1.0.0, status) =
infrun: 1639.22213.0 [Thread 1639.22213],
infrun: status->kind = stopped, signal = GDB_SIGNAL_0
infrun: Thread 1639.22260 not executing
infrun: Thread 1639.22256 not executing
infrun: Thread 1639.22258 not executing
infrun: Thread 1639.22257 not executing
infrun: Thread 1639.22259 not executing
infrun: Thread 1639.22255 not executing
infrun: Thread 1639.22253 executing, already stopping
infrun: Thread 1639.22251 executing, already stopping
infrun: Thread 1639.22252 executing, already stopping
infrun: Thread 1639.22250 executing, already stopping
infrun: Thread 1639.22254 executing, already stopping
infrun: Thread 1639.22247 executing, already stopping
infrun: Thread 1639.22213 not executing
infrun: Thread 1639.22207 not executing
infrun: Thread 1639.22201 not executing
infrun: Thread 1639.22219 not executing
infrun: Thread 1639.1639 not executing
** HANG HERE **
GDB is waiting for the stop replies of any of those "already stopping"
threads. Take 22253 for example. On the gdbserver logs we see:
...
resume_stop request for LWP 22253
stopping LWP 22253
Sending sigstop to lwp 22253
linux_resume done
...
and:
my_waitpid (-1, 0x40000001)
my_waitpid (-1, 0x80000001): status(3057f), 22253
LWFE: waitpid(-1, ...) returned 22253, ERRNO-OK
LLW: waitpid 22253 received Trace/breakpoint trap (stopped)
pc is 0x3615ef4ce1
HEW: Got clone event from LWP 22253, new child is LWP 22259
but from here on, we never see any other event for LWP 22253. In
particular, we never see the expected SIGSTOP (from "Sending sigstop"
above). The issue is that linux_resume_stopped_resumed_lwps never
re-resumes the 22253 after the clone event.
gdb/gdbserver/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* linux-low.c (resume_stopped_resumed_lwps): Don't check whether
the thread's last_resume_kind was resume_stop.
With "maint set target-non-stop on", the attach tests occasionally
crash gdbserver.
Basically, gdb attaches with vAttach;PID, and then shortly after reads
the xml target description for that process, to figure out the
process' architecture. On the gdbserver side, the target description
is only filled in when the first process/thread in the thread group
reports its initial PTRACE_ATTACH SIGSTOP. So if GDB is fast enough,
it can read the target description _before_ that initial stop, and
then gdbserver dies dereferencing a NULL tdesc pointer.
gdb/gdbserver/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* linux-low.c (linux_attach): In non-stop mode, wait for one stop
before returning.
There's currently no non-stop equivalent of the all-stop ^C (\003)
"packet" that GDB sends when a ctrl-c is pressed while a foreground
command is active. There's vCont;t, but that's defined to cause a
"signal 0" stop.
This fixes many tests that type ^C, when testing with extended-remote
with "maint set target-non-stop on". E.g.:
Continuing.
talk to me baby
PASS: gdb.base/interrupt.exp: process is alive
a
a
PASS: gdb.base/interrupt.exp: child process ate our char
^C
[Thread 22730.22730] #1 stopped.
0x0000003615ee6650 in __read_nocancel () at ../sysdeps/unix/syscall-template.S:81
81 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS)
(gdb) FAIL: gdb.base/interrupt.exp: send_gdb control C
p func1 ()
gdb/
2015-11-30 Pedro Alves <palves@redhat.com>
* NEWS (New remote packets): Mention vCtrlC.
* remote.c (PACKET_vCtrlC): New enum value.
(async_remote_interrupt): Call target_interrupt instead of
target_stop.
(remote_interrupt_as): Remove 'ptid' parameter.
(remote_interrupt_ns): New function.
(remote_stop): Adjust.
(remote_interrupt): If the target is in non-stop mode, try
interrupting with vCtrlC.
(initialize_remote): Install set remote ctrl-c packet.
gdb/doc/
2015-11-30 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Bootstrapping): Add "interrupting remote targets"
anchor.
(Packets): Document vCtrlC.
gdb/gdbserver/
2015-11-30 Pedro Alves <palves@redhat.com>
* server.c (handle_v_requests): Handle vCtrlC.
This fixes a gdbserver crash when running
gdb.threads/non-ldr-exc-1.exp with "maint set target-non-stop on".
The problem is that qSymbol is called when gdbserver has
current_thread == NULL.
gdb/gdbserver/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* gdbthread.h (find_any_thread_of_pid): Declare.
* inferiors.c (thread_of_pid, find_any_thread_of_pid): New
functions.
* server.c (handle_query): If current_thread is NULL, look for
another thread of the selected process.
This patch adds support for thread names in the remote protocol, and
updates gdb/gdbserver to use it. The information is added to the XML
description sent in response to the qXfer:threads:read packet.
gdb/ChangeLog:
* linux-nat.c (linux_nat_thread_name): Replace implementation by call
to linux_proc_tid_get_name.
* nat/linux-procfs.c (linux_proc_tid_get_name): New function,
implementation inspired by linux_nat_thread_name.
* nat/linux-procfs.h (linux_proc_tid_get_name): New declaration.
* remote.c (struct private_thread_info) <name>: New field.
(free_private_thread_info): Free name field.
(remote_thread_name): New function.
(thread_item_t) <name>: New field.
(clear_threads_listing_context): Free name field.
(start_thread): Get name xml attribute.
(thread_attributes): Add "name" attribute.
(remote_update_thread_list): Copy name field.
(init_remote_ops): Assign remote_thread_name callback.
* target.h (target_thread_name): Update comment.
* NEWS: Mention remote thread name support.
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_target_ops): Use linux_proc_tid_get_name.
* server.c (handle_qxfer_threads_worker): Refactor to include thread
name in reply.
* target.h (struct target_ops) <thread_name>: New field.
(target_thread_name): New macro.
gdb/doc/ChangeLog:
* gdb.texinfo (Thread List Format): Mention thread names.
This crash is observable by debugging a threaded program on LynxOS.
On the GDB side, this is what we would see:
% gdb q
(gdb) target remote machine:4444
(gdb) break q.adb:6
(gdb) cont
[gdb hits breakpoint]
(gdb) cont
Remote connection closed <<<--- expected: [Inferior 1 (Remote target) exited normally]
On the gdbserver side, which was launched as usual:
% gdbserver --once :4444 q
Segmentation fault (core dumped)
Ooops!
The problem happens while GDB is trying to handle the thread termination
event of the thread that hit the breakpoint. It started happening after
the following change was made:
commit 96e7a1eb6d
Date: Fri Oct 16 11:08:38 2015 -0400
Subject: gdbserver: Reset current_thread when the thread is removed.
Reset current_thread and make sure 'remove_process' is used
after all associated threads have been removed first.
More precisely:
. GDBserver receives the execution-resume order;
. lynx-low resumes it succesfully, and then relies on lynx_wait_1
to wait for the next event;
. We quickly receive one, which lynx_wait_1 analyzes to be
a "thread exit" event, and therefore does...
case SIGTHREADEXIT:
remove_thread (find_thread_ptid (new_ptid));
lynx_continue (new_ptid);
goto retry;
=> remove_thread causes current_thread to be set to NULL...
(that's the recent change mentioned above)
=> ... which causes problems during lynx_continue, because
it calls lynx_resume, which calls regcache_invalidate,
which unfortunately assumes that CURRENT_THREAD is not NULL:
void
regcache_invalidate (void)
{
/* Only update the threads of the current process. */
SEGV!--> int pid = ptid_get_pid (current_thread->entry.id);
find_inferior (&all_threads, regcache_invalidate_one, &pid);
}
Since the problem at hand is caused by trying to figure out which
inferior to reset the regcache for, and since lynx_resume actually
had that info, this patch fixes the problem by introducing a new
routine called regcache_invalidate_pid, which invalidates the cache
of the given pid; and then modifies lynx_resume use that new routine
rather than relying on regcache_invalidate to invalidate the regcache
of the expected inferior.
gdb/gdbserver/ChangeLog:
* regcache.h (regcache_invalidate_pid): Add declaration.
* regcache.c (regcache_invalidate_pid): New function, extracted
from regcache_invalidate.
(regcache_invalidate): Reimplement using regcache_invalidate_pid.
Add trivial documentation comment.
* lynx-low.c: Use regcache_invalidate_pid instead of
regcache_invalidate.
See the comment added in configure.ac for more details behind
this change.
gdb/gdbserver/ChangeLog:
* configure.ac: Do not call AC_CHECK_TYPES for Elf32_auxv_t
and Elf64_auxv_t if the target is Android.
The target_process_qsupported method is called for each qSupported
feature that the common code does not recognize. The only current
implementation, for x86 Linux (x86_linux_process_qsupported), assumes
that it either is called with the "xmlRegisters=i386" feature, or that
it is isn't called at all, indicating the connected GDB predates x86
XML descriptions.
That's a bad assumption however. If GDB sends in a new/unknown (to
core gdbserver) feature after "xmlRegisters=i386", say, something like
qSupported:xmlRegisters=i386;UnknownFeature+, then when
target_process_qsupported is called for "UnknownFeature+",
x86_linux_process_qsupported clears the 'use_xml' global and calls
x86_linux_update_xmltarget, and gdbserver ends up _not_ reporting a
XML description...
This commit changes the target_process_qsupported API to instead pass
down a vector of unprocessed qSupported features in one go.
(There's an early call to target_process_qsupported(NULL) that
indicates "starting qSupported processing". There's no matching call
to mark the end of processing, though. I first fixed this by passing
(char *)-1 to indicate that, and adjusted the x86 backend to only
clear 'use_xml' when qSupported processing starts, and then only call
x86_linux_update_xmltarget() when (char *)-1 was passed. However, I
wasn't that happy with the hack and came up this alternative version.)
gdb/gdbserver/ChangeLog:
2015-11-19 Pedro Alves <palves@redhat.com>
* linux-low.c (linux_process_qsupported): Change prototype.
Adjust.
* linux-low.h (struct linux_target_ops) <process_qsupported>:
Change prototype.
* linux-x86-low.c (x86_linux_process_qsupported): Change prototype
and adjust to loop over all features.
* server.c (handle_query) <qSupported>: Adjust to call
target_process_qsupported once, passing it a vector of unprocessed
features.
* target.h (struct target_ops) <process_qsupported>: Change
prototype.
(target_process_qsupported): Adjust.
Both x86_64 GNU/Linux and x86_64 mingw-w64 build cleanly with
--enable-targets=all. This enables -Werror by default in C++ mode
too, in order to let the buildbot catch C++ build regressions for us.
gdb/ChangeLog:
2015-11-19 Pedro Alves <palves@redhat.com>
* configure.ac (ERROR_ON_WARNING): Don't check whether in C++
mode.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2015-11-19 Pedro Alves <palves@redhat.com>
* configure.ac (ERROR_ON_WARNING): Don't check whether in C++
mode.
* configure: Regenerate.
Yao Qi
Simon Marchi
Sergio Durigan Junior
Pedro Alves
Simon Marchi
Max Filippov
Michael Sturm
Walfred Tedeschi
Antoine Tremblay
Joel Brobecker
Luis Machado
Tom Tromey
Andreas Arnez
Carl E. Love
Akash Trehan
Adhemerval Zanella
Chung-Lin Tang
Jon Turney
Ulrich Weigand
Par Olsson
Marcin Kościelnicki
Wei-cheng Wang
Gary Benson
Josh Stone
Mike Frysinger
Patrick Palka
Don Breazeal
Doug Evans