* utils-fpu.inc (enable_fpu, ckm_fp_cc): New macros.
(clrset_fp_cc): Fix mask used for upper 7 condition codes.
* utils-mdmx.inc: Include utils-fpu.inc.
(enable_mdmx): Use enable_fpu.
* utils-fpu.inc: New file.
* utils-mdmx.inc: New file.
* mdmx-ob.s: New file.
* mdmx-ob-sb1.s: New file.
* basic.exp: Run new mdmx-ob and mdmx-ob-sb1 tests.
* sim/mips/basic.exp (run_hilo_test): New procedure.
(models): Only list models that are included in the configuration.
(submodels): New variable, set to submodels of the above.
(mips64vr-*-elf, mips64vrel-*-elf): New configuration stanza.
Run hilo-hazard-[123].s.
(MIPS_MACH_HAS_MULT_HILO_HAZARD, MIPS_MACH_HAS_DIV_HILO_HAZARD): New.
* mips.igen (check_mt_hilo, check_mult_hilo, check_div_hilo): Provide
separate implementations for mipsIV and mipsV. Use new macros to
determine whether the restrictions apply.
* frv.c (frvbf_iacc_cut): Rework, taking rounding into account.
testsuite/
* sim/frv/fr400/scutss.cgs: Fix tests to account for rounding.
Add some new ones.
* gencode.c (table): Change from char to short.
(dumptable): Change generated table from char to short.
* interp.c (sh_jump_table, sh_dsp_table, ppi_table): char to short.
(init_dsp): Compute size of sh_dsp_table.
(sim_resume): Change jump_table from char to short.
Committed by Andrew Cagney.
* mloopx.in: Update copyright.
(xextract-pbb): Fixed trap for system calls operation in parallel.
* mloop2.in (xextract-pbb): Ditto.
2004-01-26 Chris Demetriou <cgd@broadcom.com>
* configure.in (mips*-*-*): Configure in testsuite.
* configure: Regenerate.
[ sim/testsuite/ChangeLog ]
2004-01-26 Chris Demetriou <cgd@broadcom.com>
* sim/mips: New directory. Tests for the MIPS simulator.
[ sim/testsuite/sim/mips/ChangeLog ]
2004-01-26 Chris Demetriou <cgd@broadcom.com>
* basic.exp: New file.
* testutils.inc: New file.
* sanity.s: New file.
* mips.igen (check_mf_cycles, check_mt_hilo, check_mf_hilo)
(check_mult_hilo): Improve comments.
(check_div_hilo): Likewise. Also, fork off a new version
to handle mips32/mips64 (since there are no hazards to check
in MIPS32/MIPS64).
* gencode.c (expand_opcode): Simplify and reorganize.
Eliminate "shift" parameter. Eliminate "4 bits at a time"
assumption. Flatten switch statement to a single level.
Add "eeee" token for even-numbered registers.
(bton): Delete.
(fsca): Use "eeee" token.
(ppi_moves): Rename to "expand_ppi_movxy". Do the ddt
[movx/movy] expansion here, as well as the ppi expansion.
(gensim_caselist): Accept 'eeee' along with 'nnnn'.
(O_RDONLY): Do not define.
(O_WRONLY): Likewise.
(O_RDWR): Likewise.
(targ-vals.h): Include it.
(translate_open_mode): Use TARGET_O_* instead of O_*.
(SWIopen): Likewise.
* Makefile.in (armos.o): Depend on targ-vals.h.
(SPR_REGNUM_MAX): Delete.
* frv.c (gdb/sim-frv.h): Include.
(frvbf_fetch_register, frvbf_store_register): Use register number
constants from gdb/sim-frv.h. Check availability of general
purpose and float registers.
* frv-sim.h (REGNUM_LR): Removed.
(REGNUM_SPR_MIN,REGNUM_SPR_MAX): New macros.
* frv.c (frvbf_fetch_register): Fetch SPR registers based on
REGNUM_SPR_MIN and REGNUM_SPR_MAX. Check whether SPRs are implemented.
Return 0 for an unimplemented register. Return the length of the data
for an implemented register.
(frvbf_store_register): Ditto.
* h8300/compile.c : Addition of extern variable h8300_normal_mode
(SP) : Handle normal mode
(bitfrom) : Use normal mode flag to return suitable value
(lvalue) : Use normal mode flag to return command line location
(decode) : Decode instruction correctly for normal mode
(init_pointers) : Initialise memory correctly for normal mode
(sim_resume) : Handle cases for normal mode using h8300_normal_mode flag
(sim_store_register) : Handle 2 byte PC for normal mode
(sim_fetch_register) : Handle 2 byte PC for normal mode
(set_h8300h) : Set normal mode flag as per architechture
(sim_load) : Allocate 64K for normal mode instead of bigger memory
* callback.h (struct host_callback_struct): New members ftruncate
and truncate.
gdb:
sim/common:
* callback.c (os_ftruncate, os_truncate): New functions.
(default_callback): Initialize ftruncate and truncate members.
sim/sh:
* syscall.h (SYS_truncate, SYS_ftruncate): Define.
* interp.c (trap): Add support for SYS_ftruncate and SYS_truncate.
* sim/frv/testutils.inc (or_gr_immed): New macro.
* sim/frv/fp_exception-fr550.cgs: Write insns using
unaligned registers into the program in order to
cause the required exceptions.
* sim/frv/fp_exception.cgs: Ditto.
* sim/frv/regalign.cgs: Ditto.
* sim/frv/fr550: New subdirectory.
* sim/frv/fr400/*.cgs: Add fr550 as appropriate.
* sim/frv/fr500/*.cgs: Add fr550 as appropriate.
* sim/frv/interrupts/*.cgs: Add fr550 as appropriate.
* sim/frv/interrupts/*-fr550.cgs: New test cases for fr550.
* profile.h (update_FR_ptime): New prototype.
(update_FRdouble_ptime): Ditto.
(update_SPR_ptime): Ditto.
(increase_ACC_busy): Ditto.
(enforce_full_acc_latency): Ditto.
(post_wait_for_SPR): Ditto.
* profile.c (update_FR_ptime): Moved here from profile-fr500.c.
(update_FRdouble_ptime): Ditto.
(update_SPR_ptime): New function.
(increase_ACC_busy): Ditto.
(enforce_full_acc_latency): Ditto.
(vliw_wait_for_fdiv_resource): Correct resource name.
(vliw_wait_for_fsqrt_resource): Ditto.
(post_wait_for_SPR): New function.
* profile-fr500.c (frvbf_model_fr500_u_commit): New function.
(frvbf_model_fr500_u_gr2fr): Pass out_FRk as output register to
adjust_float_register_busy.
(frvbf_model_fr500_u_gr_load): Record latency of SPR registers.
(frvbf_model_fr500_u_fr_load): Wait for and record latency of SPR
registers.
(frvbf_model_fr500_u_float_arith): Ditto.
(frvbf_model_fr500_u_float_dual_arith): Ditto.
(frvbf_model_fr500_u_float_div): Ditto.
(frvbf_model_fr500_u_float_sqrt): Ditto.
(frvbf_model_fr500_u_float_convert): Ditto.
(update_FR_ptime): Moved to profile.c
(update_FRdouble_ptime): Moved to profile.c
* profile-fr400.c (update_FR_ptime): Removed. Identical to functions
for other machines.
(update_FRdouble_ptime): Ditto.
* arch.h,cpu.h,sem.c,decode.[ch],model.c,sem.c: Regenerated.
* registers.c (frv_check_spr_read_access): Check for access to
ACC4-ACC63 and ACCG4-ACCG63.
* profile.h (frv-desc.h): #include it.
(spr_busy): New member of FRV_PROFILE_STATE.
(spr_latency): Ditto.
(GNER_FOR_GR): New macro.
(FNER_FOR_FR): New maccro.
(update_SPR_latency): New function.
(vliw_wait_for_SPR): New function.
* profile.c (profile-fr550.h): #include it.
(update_latencies): Update SPR latencies.
(update_target_latencies): Ditto.
(update_SPR_latency): New function.
(vliw_wait_for_SPR): New function.
* profile-fr500.c (frvbf_model_fr500_u_idiv): Record GNER latency.
(frvbf_model_fr500_u_trap): Removed unused variable, ps.
(frvbf_model_fr500_u_check): Ditto.
(frvbf_model_fr500_u_clrgr): New unit modeller for fr500.
(frvbf_model_fr500_u_clrfr): Ditto.
(frvbf_model_fr500_u_spr2gr): Wait for SPR.
(frvbf_model_fr500_u_gr2spr): Ditto.
* frv-sim.h (H_SPR_ACC4): New macro.
(H_SPR_ACCG4): New macro;
(H_SPR_ACC0): Removed.
(H_SPR_ACCG0): Removed.
* arch.h,model.c,sem[ch],decode.[ch]: Regenerated.
* profile.c (slot_names): FM1 was listed twice. Changed first
instance to FM0. Added IALL, FMALL and FMLOW.
(print_parallel): Don't examine slots with no insns.
On behalf of Doug Evans <dje@sebabeach.org>
* Makefile.in (stamp-arch,stamp-cpu): Pass archfile to cgen.
Remove copying of .cpu file to cgen/cpu, no longer needed.
On behalf of Doug Evans <dje@sebabeach.org>
* cgen.sh: New arg archfile.
* Make-common.in (cgen-arch,cgen-cpu,cgen-defs,cgen-decode,
cgen-cpu-decode,cgen-desc): Update call to cgen.sh.
* sim/frv/interrupts/Ipipe-fr400.cgs: New file.
* sim/frv/interrupts/Ipipe-fr500.cgs: New file.
* sim/frv/interrupts/Ipipe.cgs: Remove (replaced by above).
Dave Brolley <brolley@redhat.com>
* frv/: New directory, simulator for the Fujitsu FR-V.
* testsuite/frv-elf/: New directory.
* testsuite/sim/frv/: New directory.
* configure.in: Add frv configury.
* configure: Regenerate.
2003-08-28 Andrew Cagney <cagney@redhat.com>
* dv-glue.c (hw_glue_finish): Change %d to %ld to match sizeof.
* sim-options.c (print_help): Cast the format with specifier to
"int".
Index: mn10300/ChangeLog
2003-08-28 Andrew Cagney <cagney@redhat.com>
* dv-mn103ser.c (do_polling_event): Change type of "serial_reg" to
"long".
(read_status_reg): Cast "serial_reg" to "long".
* dv-mn103tim.c (do_counter_event): Change type of "timer_nr" to
"long".
(do_counter6_event, write_mode_reg, write_tm6md): Ditto.
* sim/sh/gencode.c ( tab[] ): Addition of MAC.L handler and
correction for MAC.W handler
* sim/sh/interp.c ( macl ): New Function. Implementation of
MAC.L handler.
* MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
maintenance. List igen and sh maintainers. Mention that target
and global maintainers pick up the slack.