(hw_tree_find_*_property): Clean up error message when property is not found.
* dv-pal.c (hw_pal_io_read_buffer): Check the smp property is present before
looking for it.
hw_pal_timer, hw_pal_timer_value): Define.
(hw_pal_io_read_buffer, hw_pal_io_write_buffer): Add timer support
(do_counter_event, do_counter_read, do_counter_value,
do_counter_write): new functions.
* hw-tree.c (hw_printf): Send tree dump to stderr, same as other
trace output.
* hw-base.c (hw_create): Stop searching for a device when one is
found.
* (stamp-tvals sim-inline.c): Use $(SHELL) when invoking
move-if-change. Fixes NT native build problem.
* Makefile.in (nltvals.def): Use $(SHELL) when invoking
move-if-change. Fixes NT native build problem.
* configure: Regenerate with autoconf 2.12.1 to fix shell issues for
NT native builds.
Tidy up hw-properties error messages.
New device dv-glue.c (copied from ../ppc/hw_glue.)
Only attach a port after a devices initialization has finished.
* sky-pke.h (pke_fifo*): Exported these formerly private functions.
(pke_device): Added FIFO cache fields.
* sky-pke.c (pke_fifo_reset): New function for GPUIF client -
clear FIFO contents.
(pke_pcrel_fifo): Added caching facility to prevent O(n^2) cost for
searching for consecutive operand words.
* sky-libvpe.c (MEM, uMEM): New/changed macros that perform modulo
calculations to handle out-of-range VU memory addresses.
(*): Replaced many previous uses of MEM[] and state->uMEM[] with
calls to above macros.
* sky-vu.h (struct VectorUnitState): Added qw/dw size fields for
MEM/uMEM buffers, for overflow prevention. Renamed MEM/uMEM fields
to catch all their prior users.
* sky-vu0.c (vu0_attach): Manually align MEM0/MEM1 buffers to force
16-byte alignment. (zalloc is not enough.)
* sky-vu1.c (vu1_attach): Ditto.
(init_vu): Store buffer sizes from allocation into VectorUnitState.
* sky-gpuif.h (GifPath): Use a pke_fifo strucf instead of
temporary fixed-size array for flexible FIFO sizing.
* sky-gpuif.c (SKY_GPU2_REFRESH): This is now an integer value to be
used as a modulus for periodic refresh.
(refresh): New function to send GPU2 refresh code periodically.
(*): Use pke_fifo calls to en/dequeue GPUIF tags & operands.
* sky-pke.h (struct pke_device): Added fields to allow caching of
results from recent FIFO searches.
the stand-alone executable.
[in ChangeLog.sky:]
* sky-gpuif.c (call_gs): Call properly into GPU2 library if
configured --with-sim-gpu2. Use SKY_GPU2_REFRESH symbol as
placeholder for future GPU2-refresh policy.
[in ChangeLog:]
* Makefile.in (MIPS_EXTRA_LIBS, SIM_EXTRA_LIBS): Added
configurable settings for stand-alone simulator.
start-sanitize-sky
* configure.in: Added --with-sim-gpu2 option to specify path of
sky GPU2 library. Triggers -DSKY_GPU2 for sky-gpuif.c, and
links/compiles stand-alone simulator with this library.
* interp.c (MEM_SIZE): Increased default sky memory size to 16MB.
end-sanitize-sky
* configure.in: Added X11 search, just in case.
* configure: Regenerated.
will ignore this until next SCEI clarification.
* tsv308_1.trc: Fixed test case as per SCEI email.
* tsv316_1.trc: Ditto.
* tsv408_1.trc: Same.
* tsv416_1.trc: Again.
* t-pke3.trc: Added more padding to one VU test to widen timing race.
* Make-common.in (dv-sockser.o): Add rule for.
* aclocal.m4: Check for fcntl.h.
* config.h: Add HAVE_FCNTL_H.
* sim-break.c (remove_breakpoint): Fix thinko.
* sim-hload.c (sim_load): Provide default value of SIM_HANDLES_LMA.
Use SIM_HANDLES_LMA for lma_p arg to sim_load_file.
of PKE, some old test cases had to be modified. There are suspected bugs
in the SCEI test cases too, so "make check" does not run cleanly at present.
* tss*.trc: New files, generated by perl script from
SCEI "test0" bucket.
* tsv*.trc: New files, generated by perl script from SCEI "test0"
bucket. Note that tsv432_0 may obsolete t-pke1.
* Makefile.in (TESTS): Run new scripts.
(check): Bulldoze through failing test cases with "make -k" until
SCEI fixes some of them.
(.run.ok): Increased run-time limit since some test runs can take
several seconds.
effectively full. The code is believed to be functionally complete now.
Some code cleanup is included at no extra charge in this version.
Fri Mar 13 20:21:57 1998 Frank Ch. Eigler <fche@cygnus.com>
* sky-vu1.c: (dump_mem): Commented out function to satiate
warning-ful compilation.
* sky-pke.c: (pke_reset): New function, called explicitly at
initialization and at FBRST.
(pke_fifo_flush): New function to flush (skip over) existing
quadwords in FIFO.
(pke_fifo_fit): New function to add space for new quadword in
FIFO.
(pke_fifo_access): New function to absolute-index into FIFO.
(pke_fifo_old): New function to remove old quadwords from FIFO.
(pke_begin_interrupt_stall): New function to abstract
interrupt-caused stalls.
(pke_*): Access PKE FIFO only thorugh pke_fifo functions.
(pke_pcrel_*): Renamed pke_pc_* functions.
(pke_code_unpack): Numerous logic tweaks for latest UNPACK
behavior changes & clarifications from SCEI.
* sky-pke.h (struct pke_fifo): New explicit FIFO representation.
(struct pke_device): Use struct above.
(PKE_DEBUG): Removed macro as misnomer.
* sky-hardware.c: Moved *_cmd_install declarations out.
* sky-hardware.h: Moved *_cmd_install declarations in.
define macro STATE_PROG_SYMS.
* sim-trace.c (trace_one_insn): Add variables abfd, symsize,
symbol_count, and asymbols. Call bfd_get_symtab_upper_bound
and bfd_canonicalize_symtab, to get symbol table on first use
and preserve it via STATE_PROG_SYMS for future calls to
bfd_find_nearest_line.
for sim/testsuite/sky:
* t-pke4.run: Removed test, since it succeeds yet returns a
non-zero exit code.
* Makefile.in (RUNOPTS): Removed --memory-size flag, made
unnecessary by sim/mips/interp.c changes.
(TESTS): Removed t-pke4.ok target.
* t-pke3.trc: Classified tests with [---] indicators, to match
items up with entries documented in testplan.sgml. Added numerous
additional tests. They assert behavior that assumes certain
favorable answers to PKE question set #6 to SCEI.
* t-pke1.trc: Added some [---] indicators.
for sim/mips:
* sky-pke.c (pke_issue): Revamped interrupt & stall code. Assume
that ER1/ER0/PIS bits are only set if not masked by ERR bits.
Signal PIS only if unmasked.
(pke_code_error): Signal ER1 only if unmasked.
(pke_pc_fifo): Signal ER0 only if unmasked.
(pke_code_unpack): Round up num_operands for last operand's
partial-word. Factor out "R" bit handling for better coverage
analysis. Fill upper words of a quadword with zeroes for Vn_m
UNPACK with n < 4.
* sky-device.c (device_error): Made function accept varargs.
* sky-device.h (device_error): Changed declaration to match.
* interp.c (sim_open): Made 0x0000 area memory be an alias of
the K0/K1 segments. Sanitized code.
* Makefile.in (vr4320.igen) : Added.
* configure.in (mips64vr4320-*-*): Added.
* configure : Rebuilt.
* mips.igen : Correct the bfd-names in the mips-ISA model entries.
Add the vr4320 model entry and mark the vr4320 insn as necessary.
* sky-vu1.c (vu1_io_write_register_window): Make CIA (pc) write
effective by updating more registers.
* sky-libvpe.c: Updated to match earlier VU state-change code.
* sky-vpe.h: Removed unused globals from declarations.
PKE tests run identically on SPARC/Solaris and x86/Linux.
* sky-pke.c (pke_io_{read,write}_buffer): Endianness fixes aka
"E-fixes" in register and FIFO read/writes.
(pke_code_{pkemscalf,pkemscal}): E-fixes in VU CIA setting.
(pke_code_{mpg,unpack}): E-fixes in VU memory & tracking updates.
(pke_code_direct): E-fixes in GPUIF FIFO stuffing.
* sky-pke.h (PKE_MEM_WRITE): E-fixes in trace file writing.
* sky-vu0.c (vu0_attach): Allocate micro/data memory with zalloc
to guarantee sufficient (16-byte) alignment.
* sky-vu1.c (vu1_attach): Ditto.
(vu1_io_read_register_window): *PARTIAL* E-fixes in register accesses.
* sky-libvpe.c (gif_write): E-fixes in GPUIF FIFO stuffing.
* sky-gpuif.c (gif_io_{read,write}_buffer): E-fixes in
register and FIFO read/writes.
* sky-dma.c (do_dma_transfer_tag): E-fixes in tag reading.
mechanism is starting to subside.
* sky-pke.h (PKE_FLAG_INT_NOLOOP): Added device flag to indicate
presence of stalled & interrupted PKEcode.
* sky-pke.c (pke_issue): Added PKEcode interrupt bit handling.
(pke_flip_dbf): Changed double-buffering logic to match SCEI
clarification.
(pke_code_*): Added interrupt bit stalling clause.
(pke_code_pkems*): Added ITOP/ITOPS transmission code.
(pke_code_unpack): Added more careful logic for processing
overflows of VU data memory addresses.
(engine_resume_full): Keep accurate core profile data.
* cgen-utils.c (sim_disassemble_insn): Don't use
sim_core_read_aligned_N, it messes up profiling results.
* sky-pke.h (PKE_MEM_READ): Removed "read" entry from FIFO trace.
* sky-pke.c (pke_attach): Set trace file to line buffering iff
open.
(pke_io_read_buffer, pke_io_write_buffer): Handle erroneous
reads/writes by zero-padding.
(pke_io_write_buffer): Switch to more bit-field definition macros.
(pke_issue): Remove "stalled" entry from FIFO trace.
(pke_pc_advance): Correct logic for DMA-tag-skipping, PKEcode
classification.
(pke_code_mskpath3): Sketch of possible PATH3 masking method.
(pke_code_mpg): Keep order of lower/upper VU words as supplied.
(pke_code_unpack): Logic change for wl/cl/num unpacking. Weird.
little struct.
interp.c: Update. Also add floating point Max/Min functions.
mips.igen: Remove r5900 tag from any floating point instructions.
r5900.igen: Rewrite. Implement *all* floating point insns (except ld/st).
r5400.igen: Tag mdmx functions as being mdmx specific.
discarded function warning.
* igen.c (main): Clarify -Wnodiscard.
* ld-insn.c (parse_function_record): For functions, allow use of
instruction style function model records
were hammered in today's runs. Work is beginning in endian-proofing
the code.
* sky-pke.c (pke1_issue): Issue on correct PKE device.
(pke_io_write_buffer, pke_code_mpg, pke_code_unpack): Perform more
endian conversions.
(pke_code_mpg, pke_code_direct): Add operand alignment assertions.
(pke_code_mpg): Correct VU stall checks. Correct VU opcode
transfer ordering.
(pke_code_direct): Correct typos in DIRECT operand accessing.
(pke_code_unpack): Correct conditional sign-extension handling.
* sky-gpuif.c (gif_io_read_buffer, gif_io_write_buffer): Correct
assertion polarity.
(gif_read_tag): Disable faulty DMA-tag testing code.
the SCEI PKE simulator's output on its own test sample (tsv432.in).
* sky-pke.h (PKE_MEM_READ, PKE_MEM_WRITE, PKE_REG_MASK_SET): Add
trace file records.
* sky-pke.c: (pke_track_write): Removed function. Replaced with
in-line modifications to VU tracking tables.
(pke_attach): Attach VU tracking tables. Use line buffering on
trace files.
(pke_issue): Spit out additional trace records.
(pke_pc_operand_bits): Correct bitfield masking error.
(*): Replace sim_read/write with kludge PKE_MEM_READ/WRITE
throughout.
(pke_code_unpack): Correct numerous small bugs in operand decoding
etc.
