* mips.h: Remove documentation of "+D" and "+T".
opcodes/
* mips-opc.c (mips_builtin_opcodes): Remove "+D" and "+T" entries.
* micromips-opc.c (micromips_opcodes): Likewise.
* mips-dis.c (print_insn_args, print_insn_micromips): Remove "+D"
and "+T" handling. Check for a "0" suffix when deciding whether to
use coprocessor 0 names. In that case, also check for ",H" selectors.
gas/
* config/tc-mips.c (validate_mips_insn, validate_micromips_insn)
(mips_ip): Remove "+D" and "+T" handling.
gas/testsuite/
* gas/mips/lb.d, gas/mips/sb.d: Use coprocessor register names
for LWC0 and SWC0.
* elfxx-mips.h (_bfd_mips_elf_get_synthetic_symtab): New
prototype.
* elf32-mips.c (elf_backend_plt_sym_val): Remove macro.
(bfd_elf32_get_synthetic_symtab): New macro.
* elfxx-mips.c (plt_entry): New structure.
(mips_elf_link_hash_entry): Add use_plt_entry member.
(mips_elf_link_hash_table): Rename plt_entry_size member to
plt_mips_entry_size. Add plt_comp_entry_size, plt_mips_offset,
plt_comp_offset, plt_got_index entries and plt_header_is_comp
members.
(STUB_LW_MICROMIPS, STUB_MOVE_MICROMIPS): New macros.
(STUB_LUI_MICROMIPS, STUB_JALR_MICROMIPS): Likewise.
(STUB_ORI_MICROMIPS, STUB_LI16U_MICROMIPS): Likewise.
(STUB_LI16S_MICROMIPS): Likewise.
(MICROMIPS_FUNCTION_STUB_NORMAL_SIZE): Likewise.
(MICROMIPS_FUNCTION_STUB_BIG_SIZE): Likewise.
(micromips_o32_exec_plt0_entry): New variable.
(mips16_o32_exec_plt_entry): Likewise.
(micromips_o32_exec_plt_entry): Likewise.
(mips_elf_link_hash_newfunc): Initialize use_plt_entry.
(mips_elf_output_extsym): Update to use gotplt_union's plist
member rather than offset.
(mips_elf_gotplt_index): Likewise. Remove the VxWorks
restriction. Use MIPS_ELF_GOT_SIZE to calculate GOT address.
(mips_elf_count_got_symbols): Update to use gotplt_union's plist
member rather than offset.
(mips_elf_calculate_relocation): Handle MIPS16/microMIPS PLT
entries.
(_bfd_mips_elf_create_dynamic_sections): Don't set PLT sizes
here.
(mips_elf_make_plt_record): New function.
(_bfd_mips_elf_check_relocs): Update comment. Record occurences
of JAL relocations that might need a PLT entry.
(_bfd_mips_elf_adjust_dynamic_symbol): Update to use
gotplt_union's plist member rather than offset. Set individual
PLT entry sizes here. Handle MIPS16/microMIPS PLT entries.
Don't set the symbol's value in the symbol table for PLT
references here. Don't set the PLT or PLT GOT section sizes
here.
(mips_elf_estimate_stub_size): Handle microMIPS stubs.
(mips_elf_allocate_lazy_stub): Likewise.
(mips_elf_lay_out_lazy_stubs): Likewise. Define a _MIPS_STUBS_
magic symbol.
(mips_elf_set_plt_sym_value): New function.
(_bfd_mips_elf_size_dynamic_sections): Set PLT header size and
PLT and PLT GOT section sizes here. Set the symbol values in
the symbol table for PLT references here. Handle microMIPS
annotation of the _PROCEDURE_LINKAGE_TABLE_ magic symbol.
(_bfd_mips_elf_finish_dynamic_symbol): Update to use
gotplt_union's plist member rather than offset. Handle
MIPS16/microMIPS PLT entries. Handle microMIPS stubs.
(_bfd_mips_vxworks_finish_dynamic_symbol): Update to use
gotplt_union's plist member rather than offset. Use
MIPS_ELF_GOT_SIZE to calculate GOT address.
(mips_finish_exec_plt): Handle microMIPS PLT. Return status.
(_bfd_mips_elf_finish_dynamic_sections): Handle result from
mips_finish_exec_plt.
(_bfd_mips_elf_link_hash_table_create): Update to use
gotplt_union's plist member rather than offset.
(_bfd_mips_elf_get_synthetic_symtab): New function.
include/elf/
* mips.h (ELF_ST_IS_MIPS_PLT): Respect STO_MIPS16 setting.
(ELF_ST_SET_MIPS_PLT): Likewise.
gdb/
* mips-tdep.c (mips_elf_make_msymbol_special): Handle MIPS16 and
microMIPS synthetic symbols.
ld/
* emulparams/elf32btsmip.sh: Arrange for .got.plt to be placed
as close to .plt as possible.
* scripttempl/elf.sc: Handle $INITIAL_READWRITE_SECTIONS and
$PLT_NEXT_DATA variables.
ld/testsuite/
* ld-mips-elf/jalx-2.dd: Update for microMIPS PLT support.
* ld-mips-elf/pic-and-nonpic-3a.dd: Update for the _MIPS_STUBS_
magic symbol.
* ld-mips-elf/pic-and-nonpic-3b.dd: Likewise.
* ld-mips-elf/pic-and-nonpic-6-n32.dd: Likewise.
* ld-mips-elf/pic-and-nonpic-6-n64.dd: Likewise.
* ld-mips-elf/pic-and-nonpic-6-o32.dd: Likewise.
* ld-mips-elf/stub-dynsym-1-10000.d: Likewise.
* ld-mips-elf/stub-dynsym-1-2fe80.d: Likewise.
* ld-mips-elf/stub-dynsym-1-7fff.d: Likewise.
* ld-mips-elf/stub-dynsym-1-8000.d: Likewise.
* ld-mips-elf/stub-dynsym-1-fff0.d: Likewise.
* ld-mips-elf/tlslib-o32.d: Likewise.
opcodes/
* mips-dis.c (is_mips16_plt_tail): New function.
(print_insn_mips16): Handle MIPS16 PLT entry's GOT slot address
word.
(is_compressed_mode_p): Handle MIPS16/microMIPS PLT entries.
2013-06-08 Catherine Moore <clm@codesourcery.com>
* config/tc-mips.c (is_opcode_valid): Build ASE mask.
(is_opcode_valid_16): Pass ase value to opcode_is_member.
(append_insn): Change INSN_xxxx to ASE_xxxx.
include/
2013-06-08 Catherine Moore <clm@codesourcery.com>
* opcode/mips.h (mips_opcode): Add ase field.
(INSN_ASE_MASK): Delete.
(INSN_DSP): Rename to ASE_DSP. Provide new value.
(INSN_DSPR2): Rename to ASE_DSPR2. Provide new value.
(INSN_MCU): Rename to ASE_MCU. Provide new value.
(INSN_MDMX): Rename to ASE_MDMX. Provide new value.
(INSN_MIPS3d): Rename to ASE_MIPS3D. Provide new value.
(INSN_MT): Rename to ASE_MT. Provide new value.
(INSN_SMARTMIPS): Rename to ASE_SMARTMIPS. Provide new value.
(INSN_VIRT): Rename to ASE_VIRT. Provide new value.
(INSN_VIRT64): Rename to ASE_VIRT64. Provide new value.
(opcode_is_member): Add ase argument. Check ase.
opcodes/
2013-06-08 Catherine Moore <clm@codesourcery.com>
Richard Sandiford <rdsandiford@googlemail.com>
* micromips-opc.c (D32, D33, MC): Update definitions.
(micromips_opcodes): Initialize ase field.
* mips-dis.c (mips_arch_choice): Add ase field.
(mips_arch_choices): Initialize ase field.
(set_default_mips_dis_options): Declare and setup mips_ase.
* mips-opc.c (M3D, SMT, MX, IVIRT, IVIRT64, D32, D33, D64,
MT32, MC): Update definitions.
(mips_builtin_opcodes): Initialize ase field.
* doc/binutils.texi: Document -Mvirt disassembler option.
gas/ChangeLog:
* config/tc-mips.c (struct mips_set_options): New ase_virt field.
(mips_opts): Update for the new field.
(file_ase_virt): New variable.
(ISA_SUPPORTS_VIRT_ASE): New macro.
(ISA_SUPPORTS_VIRT64_ASE): New macro.
(MIPS_CPU_ASE_VIRT): New define.
(is_opcode_valid): Handle ase_virt.
(macro_build): Handle "+J".
(validate_mips_insn): Likewise.
(mips_ip): Likewise.
(enum options): Add OPTION_VIRT and OPTION_NO_VIRT.
(md_longopts): Add mvirt and mnovirt
(md_parse_option): Handle OPTION_VIRT and OPTION_NO_VIRT.
(mips_after_parse_args): Handle ase_virt field.
(s_mipsset): Handle "virt" and "novirt".
(mips_elf_final_processing): Add a comment about virt ASE might need a new flag.
(md_show_usage): Print out the usage of -mvirt and mno-virt options.
* doc/c-mips.texi: Document -mvirt and -mno-virt.
Document ".set virt" and ".set novirt".
gas/testsuite/ChangeLog:
* gas/mips/mips.exp: Run virt and virt64 testcases.
* gas/mips/virt.d: New file.
* gas/mips/virt.s: New file.
* gas/mips/virt64.d: New file.
* gas/mips/virt64.s: New file.
include/opcode/ChangeLog:
* mips.h (OP_MASK_CODE10): Correct definition.
(OP_SH_CODE10): Likewise.
Add a comment that "+J" is used now for OP_*CODE10.
(INSN_ASE_MASK): Update.
(INSN_VIRT): New macro.
(INSN_VIRT64): New macro
opcodes/ChangeLog:
* mips-dis.c (mips_arch_choices): Add INSN_VIRT to mips32r2 .
Add INSN_VIRT and INSN_VIRT64 to mips64r2.
(parse_mips_dis_option): Handle the virt option.
(print_insn_args): Handle "+J".
(print_mips_disassembler_options): Print out message about virt64.
* mips-opc.c (IVIRT): New define.
(IVIRT64): New define.
(mips_builtin_opcodes): Add dmfgc0, dmtgc0, hypcall, mfgc0, mtgc0,
tlbgr, tlbgwi, tlbginv, tlbginvf, tlbgwr, tlbgp VIRT instructions.
Move rfe to the bottom as it conflicts with tlbgp.
* mips-dis.c (is_compressed_mode_p): Only match symbols from the
section disassembled.
binutils/testsuite/
* binutils-all/mips/mixed-micromips.d: New test.
* binutils-all/mips/mixed-mips16.d: New test.
* binutils-all/mips/mixed-micromips.s: New test source.
* binutils-all/mips/mixed-mips16.s: New test source.
* binutils-all/mips/mips.exp: New file.
* bfd-in2.h: Add support for MIPS r5900
* config.bfd: Add support for Sony Playstation 2
* cpu-mips.c: Add support for MIPS r5900
* elfxx-mips.c: Add support for MIPS r5900 (extension of r4000)
* config/tc-mips.c: Add support for MIPS r5900
Add M_LQ_AB and M_SQ_AB to support large values for instructions lq and sq.
* config/tc-mips.c (can_swap_branch_p, get_append_method): Detect some conditional short loops to fix a bug on the r5900 by NOP in the branch delay slot.
* config/tc-mips.c (M_MUL): Support 3 operands in multu on r5900.
* config/tc-mips.c (M_TRUNCWS): Support trunc.w.s on r5900 in MIPS ISA I.
* config/tc-mips.c (s_mipsset): Force 32 bit floating point on r5900.
* configure.in: Detect CPU type when target string contains r5900 (e.g. mips64r5900el-linux-gnu).
* config/tc-mips.c (mips_ip): Check parameter range of instructions mfps and mtps on r5900.
* elf/mips.h: Add MIPS machine variant number for r5900 which is compatible with old Playstation 2 software.
* opcode/mips.h: Add support for r5900 instructions including lq and sq.
* configure.tgt: Support ELF files for Sony Playstation 2 (for ps2dev and ps2sdk).
* emulparams/elf32lr5900n32.sh: Create linker script for Sony Playstation 2 ELF files using MIPS ABI n32.
* emulparams/elf32lr5900.sh: Create linker script for Sony Playstation 2 ELF files using MIPS ABI o32.
* Makefile.am: Add linker scripts for Sony Playstation 2 ELF files.
* opcodes/mips-dis.c: Add names for CP0 registers of r5900.
* opcodes/mips-opc.c: Add M_SQ_AB and M_LQ_AB to support larger range for instructions sq and lq.
* opcodes/mips-opc.c: Add support for MIPS r5900 CPU.
Add support for 128 bit MMI (Multimedia Instructions).
Add support for EE instructions (Emotion Engine).
Disable unsupported floating point instructions (64 bit and undefined compare operations).
Enable instructions of MIPS ISA IV which are supported by r5900.
Disable 64 bit co processor instructions.
Disable 64 bit multiplication and division instructions.
Disable instructions for co-processor 2 and 3, because these are not supported (preparation for later VU0 support (Vector Unit)).
Disable cvt.w.s because this behaves like trunc.w.s and the correct execution can't be ensured on r5900.
Add trunc.w.s using the opcode encoding of cvt.w.s on r5900. This will confuse less developers and compilers.
macros, use local variables for info struct member accesses,
update the type of the variable used to hold the instruction
word.
(print_insn_mips, print_mips16_insn_arg): Likewise.
(print_insn_mips16): Add GET_OP and GET_OP_S local macros, use
local variables for info struct member accesses.
(print_insn_micromips): Add GET_OP_S local macro.
(_print_insn_mips): Update the type of the variable used to hold
the instruction word.
2011-12-08 Andrew Pinski <apinski@cavium.com>
Adam Nemet <anemet@caviumnetworks.com>
* archures.c (bfd_mach_mips_octeon2): New macro
* bfd-in2.h: Regenerate.
* cpu-mips.c (I_mipsocteon2): New enum value.
(arch_info_struct): Add bfd_mach_mips_octeon2.
* elfxx-mips.c (_bfd_elf_mips_mach): Support E_MIPS_MACH_OCTEON2.
(mips_set_isa_flags): Add bfd_mach_mips_octeon2.
(mips_mach_extensions): Add bfd_mach_mips_octeon2.
gas:
2011-12-08 Andrew Pinski <apinski@cavium.com>
Adam Nemet <anemet@caviumnetworks.com>
* tc-mips.c (CPU_IS_OCTEON): Add Octeon2.
(mips_cpu_info_table): Add Octeon2.
* doc/c-mips.texi: Document octeon2 as an acceptable value for -march=.
gas/testsuite:
2011-12-08 Andrew Pinski <apinski@cavium.com>
Adam Nemet <anemet@caviumnetworks.com>
* gas/mips/mips.exp: Add Octeon2 for an architecture.
Run octeon2 test.
* gas/mips/octeon2.d: New file.
* gas/mips/octeon2.s: New file.
include/opcode:
2011-12-08 Andrew Pinski <apinski@cavium.com>
Adam Nemet <anemet@caviumnetworks.com>
* mips.h (INSN_CHIP_MASK): Update according to INSN_OCTEON2.
(INSN_OCTEON2): New macro.
(CPU_OCTEON2): New macro.
(OPCODE_IS_MEMBER): Add Octeon2.
opcodes:
2011-12-08 Andrew Pinski <apinski@cavium.com>
Adam Nemet <anemet@caviumnetworks.com>
* mips-dis.c (mips_arch_choices): Add Octeon2.
For "octeon+", just include OcteonP for the insn.
* mips-opc.c (IOCT): Include Octeon2.
(IOCTP): Include Octeon2.
(IOCT2): New macro.
(mips_builtin_opcodes): Add "laa", "laad", "lac", "lacd", "lad",
"ladd", "lai", "laid", "las", "lasd", "law", "lawd".
Move "lbux", "ldx", "lhx", "lwx", and "lwux" up to where the standard
loads are, and add IOCT2 to them.
Add "lbx" and "lhux".
Add "qmac.00", "qmac.01", "qmac.02", "qmac.03", "qmacs.00",
"qmacs.01", "qmacs.01", "qmacs.02" and "qmacs.03".
Add "zcb" and "zcbt".
2011-11-29 Andrew Pinski <apinski@cavium.com>
* mips-dis.c (mips_arch_choices): Add Octeon+.
* mips-opc.c (IOCT): Include Octeon+.
(IOCTP): New macro.
(mips_builtin_opcodes): Add "saa" and "saad".
bfd/
2011-11-29 Andrew Pinski <apinski@cavium.com>
* archures.c (bfd_mach_mips_octeonp): New macro.
* bfd-in2.h: Regenerate.
* bfd/cpu-mips.c (I_mipsocteonp): New enum value.
(arch_info_struct): Add bfd_mach_mips_octeonp.
* elfxx-mips.c (mips_set_isa_flags): Add bfd_mach_mips_octeonp.
(mips_mach_extensions): Add bfd_mach_mips_octeonp.
include/opcodes/
2011-11-29 Andrew Pinski <apinski@cavium.com>
* mips.h (INSN_CHIP_MASK): Update according to INSN_OCTEONP.
(INSN_OCTEONP): New macro.
(CPU_OCTEONP): New macro.
(OPCODE_IS_MEMBER): Add Octeon+.
(M_SAA_AB, M_SAAD_AB, M_SAA_OB, M_SAAD_OB): New enum values.
gas/
2011-11-29 Andrew Pinski <apinski@cavium.com>
* config/tc-mips.c (CPU_IS_OCTEON): New macro function.
(CPU_HAS_SEQ): Change to use CPU_IS_OCTEON.
(NO_ISA_COP): Likewise.
(macro) <ld_st>: Add support when off0 is true.
Add support for M_SAA_AB, M_SAA_OB, M_SAAD_OB and M_SAAD_AB.
(mips_cpu_info_table): Add octeon+.
* doc/c-mips.texi: Document octeon+ as an acceptable value for -march=.
gas/testsuite/
2011-11-29 Andrew Pinski <apinski@cavium.com>
* gas/mips/mips.exp: Add octeon+ for an architecture.
Run octeon-saa-saad test.
(run_dump_test_arch): For Octeon architectures, also try octeon@.
* gas/mips/octeon-pref.d: Remove -march=octeon from command line.
* gas/mips/octeon.d: Likewise.
* gas/mips/octeon-saa-saad.d: New file.
* gas/mips/octeon-saa-saad.s: New file
* mips-opc.c (synciobdma, syncs, syncw, syncws): Move these
before sync.
(sync): New instruction with 5-bit sync type.
* mips-dis.c (print_insn_args: Add case '1' to print 5-bit values.
(OP_SH_SEQI, OP_MASK_SEQI): New bit mask and shift count for SEQI.
opcodes/
* mips-dis.c (print_insn_args): Handle field descriptor +Q.
* mips-opc.c (mips_builtin_opcodes): Add Octeon instructions seq,
seqi, sne and snei.
gas/
* config/tc-mips.c (validate_mips_insn): Handle field descriptor +Q.
(mips_ip): Likewise.
(macro_build): Likewise.
(CPU_HAS_SEQ): New macro.
(macro2) <M_SEQ_I, M_SNE_I>: Use it. Emit seq/sne and seqi/snei.
gas/testsuite/
* gas/mips/octeon.s, gas/mips/octeon.d: Add tests for seq* and sne*.
* gas/mips/octeon-ill.s, gas/mips/octeon-ill.s: Add tests for seqi
and snei.
* opcodes/mips-dis.c (mips_cp0_names_r3000): New definition.
(mips_cp0_names_r4000): Likewise.
(mips_arch_choices): Link to the above as appropriate.
gas/testsuite/:
* gas/mips/cp0-names-r3000.d: New test for R3000 CP0 symbolic
disassembly.
* gas/mips/cp0-names-r4000.d: New test for R4000/R4400 symbolic
CP0 disassembly.
* mips/mips.exp: Run the new tests.
* config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
(macro_build): Add case '2'.
(macro): Expand M_BALIGN to nop, packrl.ph or balign.
(validate_mips_insn): Add support for balign instruction.
(mips_ip): Handle DSP R2 instructions. Support balign instruction.
(OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
command line options.
(s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
(md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
* doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
.set dspr2, .set nodspr2.
[ gas/testsuite/ChangeLog ]
* gas/mips/mips32-dspr2.s, gas/mips/mips32-dspr2.d: New test for
DSP R2.
* gas/mips/mips.exp: Run new test.
[ include/opcode/Changelog ]
* mips.h (OP_SH_BP, OP_MASK_BP): Add support for balign instruction.
(INSN_DSPR2): Add flag for DSP R2 instructions.
(M_BALIGN): New macro.
[ opcodes/ChangeLog ]
* mips-dis.c (mips_arch_choices): Add DSP R2 support.
(print_insn_args): Add support for balign instruction.
* mips-opc.c (D33): New shortcut for DSP R2 instructions.
(mips_builtin_opcodes): Add DSP R2 instructions.
[ sim/mips/ChangeLog ]
* Makefile.in (IGEN_INCLUDE): Add dsp2.igen.
* configure.ac (mips*-sde-elf*, mipsisa32r2*-*-*, mipsisa64r2*-*-*):
Add dsp2 to sim_igen_machine.
* configure: Regenerate.
* dsp.igen (do_ph_op): Add MUL support when op = 2.
(do_ph_mulq): New function to support mulq_rs.ph and mulq_s.ph.
(mulq_rs.ph): Use do_ph_mulq.
(MFHI, MFLO, MTHI, MTLO): Move these instructions to mips.igen.
* mips.igen: Add dsp2 model and include dsp2.igen.
(MFHI, MFLO, MTHI, MTLO): Extend these instructions for
for *mips32r2, *mips64r2, *dsp.
(MADD, MADDU, MSUB, MSUBU, MULT, MULTU): Extend these instructions
for *mips32r2, *mips64r2, *dsp2.
* dsp2.igen: New file for MIPS DSP REV 2 ASE.
[ sim/testsuite/sim/mips/ChangeLog ]
* basic.exp: Run the dsp2 test.
* utils-dsp.inc (dspckacc_astio, dspck_tsimm): New macro.
* mips32-dsp2.s: New test.
argument and emits the string followed by a comma and then the length of
the string.
(CONST_STRNEQ): New macro. Checks to see if a variable string has a constant
string as its initial characters.
(CONST_STRNCPY): New macro. Copies a constant string to the start of a
variable string.
* bfd-in2.h: Regenerate.
* <remainign files>: Make use of the new macros.
2006-04-30 Thiemo Seufer <ths@mips.com>
David Ung <davidu@mips.com>
* config/tc-mips.c (validate_mips_insn): Handling of udi cases.
(mips_immed): New table that records various handling of udi
instruction patterns.
(mips_ip): Adds udi handling.
[ include/opcode/ChangeLog ]
2006-04-30 Thiemo Seufer <ths@mips.com>
David Ung <davidu@mips.com>
* mips.h: Defines udi bits and masks. Add description of
characters which may appear in the args field of udi
instructions.
[ opcodes/ChangeLog ]
2006-04-30 Thiemo Seufer <ths@mips.com>
David Ung <davidu@mips.com>
* mips-opc.c (mips_builtin_opcodes): Add udi instructions
"udi0" to "udi15".
* mips-dis.c (print_insn_args): Adds udi argument handling.
instructions. Define MIPS16_ALL_ARGS and MIPS16_ALL_STATICS for
save/restore encoding of the args field.
* mips16-opc.c: Add MIPS16e save/restore opcodes.
* mips-dis.c (print_mips16_insn_arg): Handle printing of 'm'/'M'
codes for save/restore.
* config/tc-mips.c (mips16_ip): Add handling of 'm' and 'M' codes
for the MIPS16e save/restore instructions.
* gas/mips/mips.exp: Run new save/restore tests.
* gas/testsuite/gas/mips/mips16e-save.s: New test for generating
different styles of save/restore instructions.
* gas/testsuite/gas/mips/mips16e-save.d: New.
(mips_builtin_opcodes): Move "bc0f", "bc0fl", "bc0t", "bc0tl" to the
bottom to avoid opcode collision with "mftr" and "mttr".
Add MT instructions.
* mips-dis.c (mips_arch_choices): Enable INSN_MT for mips32r2.
(print_insn_args): Add supports for +t, +T, !, $, *, &, g operand
formats.
* mips-dis.c (no_aliases): New disassembly option flag.
(set_default_mips_dis_options): Init no_aliases to zero.
(parse_mips_dis_option): Handle no-aliases option.
(print_insn_mips): Ignore table entries that are aliases
if no_aliases is set.
(print_insn_mips16): Ditto.
* mips-opc.c (mips_builtin_opcodes): Add initializer column for
new pinfo2 member and add INSN_ALIAS initializers as needed. Also
move WR_MACC and RD_MACC initializers from pinfo to pinfo2.
* mips16-opc.c (mips16_opcodes): Ditto.
* mips.h (CPU_RM7000): New macro.
(OPCODE_IS_MEMBER): Match CPU_RM7000 against 4650 insns.
bfd/
* archures.c (bfd_mach_mips7000): New.
* bfd-in2.h: Regenerated.
* cpu-mips.c (arch_info_struct): Add an entry for mips:7000.
* elfxx-mips.c (mips_set_isa_flags): Handle bfd_mach_mips7000.
(mips_mach_extensions): Add an entry for it.
opcodes/
* mips-dis.c (mips_arch_choices): Add rm7000 and rm9000 entries.
gas/
* config/tc-mips.c (hilo_interlocks): True for CPU_RM7000.
(mips_cpu_info_table): Add rm7000 and rm9000 entries.
gas/testsuite/
* gas/mips/rm7000.[sd]: New test.
* gas/mips/mips.exp: Run it.
* mips-dis.c (print_insn_args): Use position extracted by "+A"
to calculate size for "+B". Redo code for "+C" so it shares
the same style as "+A" and "+B" now do.
* mips-dis.c: Update copyright years.
(print_insn_arg): Rename to...
(print_insn_args): This, returning void. Process the whole
string of args rather than a single one. Reindent.
(print_insn_mips): Update to match the above.
2002-12-31 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c (validate_mips_insn, mips_ip): Recognize
the "+D" operand, which will be used only by the disassembler.
[ gas/testsuite/ChangeLog ]
2002-12-31 Chris Demetriou <cgd@broadcom.com>
* gas/mips/cp0sel-names-mips32.d: New test.
* gas/mips/cp0sel-names-mips32r2.d: New test.
* gas/mips/cp0sel-names-mips64.d: New test.
* gas/mips/cp0sel-names-numeric.d: New test.
* gas/mips/cp0sel-names-sb1.d: New test.
* gas/mips/cp0sel-names.s: New test source file.
* gas/mips/mips.exp: Run new tests.
[ include/opcode/ChangeLog ]
2002-12-31 Chris Demetriou <cgd@broadcom.com>
* mips.h: Note that the "+D" operand type name is now used.
[ opcodes/ChangeLog ]
2002-12-31 Chris Demetriou <cgd@broadcom.com>
* mips-dis.c (mips_cp0sel_name): New structure.
(mips_cp0sel_names_mips3264, mips_cp0sel_names_mips3264r2)
(mips_cp0sel_names_sb1): New arrays.
(mips_arch_choice): New structure members "cp0sel_names" and
"cp0sel_names_len".
(mips_arch_choices): Add references to new cp0sel_names arrays
as appropriate, and make all existing entries reference
appropriate mips_XXX_names_numeric arrays rather than simply
using NULL.
(mips_cp0sel_names, mips_cp0sel_names_len): New variables.
(lookup_mips_cp0sel_name): New function.
(set_default_mips_dis_options): Set mips_cp0sel_names and
mips_cp0sel_names_len as appropriate. Remove now-unnecessary
checks for NULL register name arrays.
(parse_mips_dis_option): Likewise.
(print_insn_arg): Handle "+D" operand type.
* mips-opc.c (mips_builtin_opcodes): Add new "+D" variants
of mfc0, mtc0, dmfc0, and dmtc0 to print CP0+sel register
names symbolically.
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* aoutx.h (NAME(aout,machine_type)): Add bfd_mach_mipsisa32r2 case.
* archures.c (bfd_mach_mipsisa32r2): New define.
* bfd-in2.h: Regenerate.
* cpu-mips.c (I_mipsisa32r2): New enum value.
(arch_info_struct): Add entry for I_mipsisa32r2.
* elfxx-mips.c (elf_mips_isa, _bfd_elf_mips_mach)
(_bfd_mips_elf_print_private_bfd_data): Handle E_MIPS_ARCH_32R2.
(_bfd_mips_elf_final_write_processing): Add
bfd_mach_mipsisa32r2 case.
(_bfd_mips_elf_merge_private_bfd_data): Handle merging of
binaries marked as using MIPS32 Release 2.
[ binutils/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* doc/binutils.texi (objdump): Note MIPS HWR (Hardware Register)
changes in MIPS -M options.
[ gas/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* configure.in: Recognize mipsisa32r2, mipsisa32r2el, and
CPU variants.
* configure: Regenerate.
* config/tc-mips.c (ISA_HAS_DROR, ISA_HAS_ROR): New defines.
(macro_build): Handle "K" operand.
(macro2): Use ISA_HAS_DROR and ISA_HAS_ROR in the places where
CPU_HAS_DROR and CPU_HAS_ROR are currently used.
(mips_ip): New variable "lastpos", and implement "+A", "+B",
and "+C" operands for MIPS32 Release 2 ins/ext instructions.
Implement "K" operand for MIPS32 Release 2 rdhwr instruction.
(validate_mips_insn): Implement "+" as a way to extend the
allowed operands, and implement "K", "+A", "+B", and "+C"
operands.
(OPTION_MIPS32R2): New define.
(md_longopts): Add entry for OPTION_MIPS32R2.
(OPTION_ELF_BASE): Adjust to accomodate OPTIONS_MIPS32R2.
(md_parse_option): Handle OPTION_MIPS32R2.
(s_mipsset): Reimplement handling of ".set mipsN" options
and add support for ".set mips32r2".
(mips_cpu_info_table): Add entry for "mips32r2" (MIPS32 Release 2).
(md_show_usage): Document "-mips32r2" option.
* doc/as.texinfo: Document "-mips32r2" option.
* doc/c-mips.texi: Likewise.
[ gas/testsuite/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* gas/mips/cp0-names-mips32r2.d: New test.
* gas/mips/hwr-names-mips32r2.d: New test.
* gas/mips/hwr-names-numeric.d: New test.
* gas/mips/hwr-names.s: New test source file.
* gas/mips/mips32r2.d: New test.
* gas/mips/mips32r2.s: New test source file.
* gas/mips/mips32r2-ill.l: New test.
* gas/mips/mips32r2-ill.s: New test source file.
* gas/mips/mips.exp: Add mips32r2 architecture data array
entry. Run new tests mentioned above.
[ include/elf/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* mips.h (E_MIPS_ARCH_32R2): New define.
[ include/opcode/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* mips.h: Document "+" as the start of two-character operand
type names, and add new "K", "+A", "+B", and "+C" operand types.
(OP_MASK_INSMSB, OP_SH_INSMSB, OP_MASK_EXTMSB)
(OP_SH_EXTMSB, INSN_ISA32R2, ISA_MIPS32R2, CPU_MIPS32R2): New
defines.
[ opcodes/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* mips-dis.c (mips_cp0_names_mips3264r2, mips_hwr_names_numeric)
(mips_hwr_names_mips3264r2): New arrays.
(mips_arch_choice): New "hwr_names" member.
(mips_arch_choices): Adjust for structure change, and add a new
entry for "mips32r2" ISA.
(mips_hwr_names): New variable.
(set_default_mips_dis_options): Set mips_hwr_names.
(parse_mips_dis_option): New "hwr-names" option which sets
mips_hwr_names, and adjust "reg-names=ARCH" to set mips_hwr_names.
(print_insn_arg): Change return type to "int"
and use that to indicate number of characters consumed.
Add support for "+" operand extension character, "+A", "+B",
"+C", and "K" operands.
(print_insn_mips): Adjust for changes to print_insn_arg.
(print_mips_disassembler_options): Adjust for "hwr-names"
addition and "reg-names" change.
* mips-opc (I33): New define (shorthand for INSN_ISA32R2).
(mips_builtin_opcodes): Note that "nop" and "ssnop" are special
forms of "sll". Add new MIPS32 Release 2 instructions: ehb,
di, ei, ext, ins, jr.hb, jalr.hb, mfhc1, mfhc2, mthc1, mthc2,
rdhwr, rdpgpr, seb, seh, synci, wrpgpr, wsbh.
Note that hardware rotate instructions (ror, rorv) can be
used on MIPS32 Release 2, and add the official mnemonics
for them (rotr, rotrv) and the similar "rotl" mnemonic for
left-rotate.
(mips_ip): Likewise.
* mips.h (INSN_MIPS16): New define.
* mips-dis.c (mips_isa_type): Add MIPS16 insn handling.
* mips-opc.c (I16): New define.
(mips_builtin_opcodes): Make jalx an I16 insn.
2002-05-30 Chris G. Demetriou <cgd@broadcom.com>
Ed Satterthwaite <ehs@broadcom.com>
* config/tc-mips.c (mips_set_options): New "ase_mdmx" member.
(mips_opts): Initialize "ase_mdmx" member.
(file_ase_mdmx): New variable.
(CPU_HAS_MDMX): New macro.
(md_begin): Initialize mips_opts.ase_mdmx and file_ase_mdmx
based on command line options and configuration defaults.
(macro_build): Note in comment that use of MDMX in macros is
not currently allowed.
(validate_mips_insn): Add support for the "O", "Q", "X", "Y", and
"Z" MDMX operand types.
(mips_ip): Accept MDMX instructions if mips_opts.ase_mdmx is set,
and add support for the "O", "Q", "X", "Y", and "Z" MDMX operand
types.
(OPTION_MDMX, OPTION_NO_MDMX, md_longopts, md_parse_option):
Add support for "-mdmx" and "-no-mdmx" options.
(OPTION_ELF_BASE): Move to accomodate new options.
(s_mipsset): Support ".set mdmx" and ".set nomdmx".
(mips_elf_final_processing): Set MDMX ASE ELF header flag if
file_ase_mdmx was set.
* doc/as.texinfo: Document -mdmx and -no-mdmx options.
* doc/c-mips.texi: Likewise, and document ".set mdmx" and ".set
nomdmx" directives.
[ gas/testsuite/ChangeLog ]
2002-05-30 Chris G. Demetriou <cgd@broadcom.com>
* gas/mips/mips64-mdmx.s: New file.
* gas/mips/mips64-mdmx.d: Likewise.
* gas/mips/mips.exp: Run new "mips64-mdmx" test.
[ include/opcode/ChangeLog ]
2002-05-30 Chris G. Demetriou <cgd@broadcom.com>
* mips.h (OP_SH_ALN, OP_MASK_ALN, OP_SH_VSEL, OP_MASK_VSEL)
(MDMX_FMTSEL_IMM_QH, MDMX_FMTSEL_IMM_OB, MDMX_FMTSEL_VEC_QH)
(MDMX_FMTSEL_VEC_OB, INSN_READ_MDMX_ACC, INSN_WRITE_MDMX_ACC)
(INSN_MDMX): New constants, for MDMX support.
(opcode character list): Add "O", "Q", "X", "Y", and "Z" for MDMX.
[ opcodes/ChangeLog ]
2002-05-30 Chris G. Demetriou <cgd@broadcom.com>
Ed Satterthwaite <ehs@broadcom.com>
* mips-dis.c (print_insn_arg): Add support for 'O', 'Q', 'X', 'Y',
and 'Z' formats, for MDMX.
(mips_isa_type): Add MDMX instructions to the ISA
bit mask for bfd_mach_mipsisa64.
* mips-opc.c: Add support for MDMX instructions.
(MX): New definition.
* mips-dis.c: Update copyright years to include 2002.
2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
* config/tc-mips.c (mips_set_options): New "ase_mips3d" member.
(mips_opts): Initialize "ase_mips3d" member.
(file_ase_mips3d): New variable.
(CPU_HAS_MIPS3D): New macro.
(md_begin): Initialize mips_opts.ase_mips3d and file_ase_mips3d
based on command line options and configuration defaults.
(macro_build, mips_ip): Accept MIPS-3D instructions if
mips_opts.ase_mips3d is set.
(OPTION_MIPS3D, OPTION_NO_MIPS3D, md_longopts, md_parse_option):
Add support for "-mips3d" and "-no-mips3d" options.
(OPTION_ELF_BASE): Move to accomodate new options.
(s_mipsset): Support ".set mips3d" and ".set nomips3d".
(mips_elf_final_processing): Add a comment indicating that a
MIPS-3D ASE ELF header flag should be set, when one exists.
* doc/as.texinfo: Document -mips3d and -no-mips3d options.
* doc/c-mips.texi: Likewise, and document ".set mips3d" and ".set
nomips3d" directives.
[ gas/testsuite/ChangeLog ]
2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
* gas/mips/mips64-mips3d.s: New file.
* gas/mips/mips64-mips3d.d: Likewise.
* gas/mips/mips.exp: Run new "mips64-mips3d" test.
[ include/opcode/ChangeLog ]
2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
* mips.h (INSN_MIPS3D): New definition used to mark MIPS-3D
instructions.
(OPCODE_IS_MEMBER): Adjust comments to indicate that ASE bit masks
may be passed along with the ISA bitmask.
[ opcodes/ChangeLog ]
2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
* mips-dis.c (mips_isa_type): Add MIPS3D instructions to the ISA
bit masks for bfd_mach_mips_sb1 and bfd_mach_mipsisa64. Add
comments for bfd_mach_mipsisa32 and bfd_mach_mipsisa64 that
indicate that they should dissassemble all applicable
MIPS-specified ASEs.
* mips-opc.c: Add support for MIPS-3D instructions.
(M3D): New definition.
* mips-opc.c: Update copyright years.
2001-10-21 Chris Demetriou <cgd@broadcom.com>
* mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
"bltzall" as writing GPR 31 (since they do).
* mips-dis.c (print_insn_arg): Calculate info->target
where appropriate.
(print_insn_mips): Fill in instruction info.
(print_mips16_insn_arg): Remove unneded variable 'val'.
Removed duplicated instruction target calculations,
calculate once and print that result. Use same idiom for
masking the jump segment bits as is used in print_insn_arg.
[gas/testsuite/ChangeLog]
2001-10-21 Chris Demetriou <cgd@broadcom.com>
* gas/mips/beq.s: Add zero words at end of instructions so
that objdump will print "..." when disassembling.
* gas/mips/beq.d: Update for disassembler changes which force
branch delay-slot nops to be printed.
* gas/mips/bge.d: Ditto.
* gas/mips/bgeu.d: Ditto.
* gas/mips/blt.d: Ditto.
* gas/mips/bltu.d: Ditto.
* gas/mips/jal-svr4pic.d: Ditto.
* gas/mips/jal-xgot.d: Ditto.
2001-10-17 Chris Demetriou <cgd@broadcom.com>
* gas/mips/mips.exp (sb1-ext-ps): New test to test
SB-1 core's paired-single extensions to the MIPS64 ISA.
* gas/mips/sb1-ext-ps.d: New file.
* gas/mips/sb1-ext-ps.s: New file.
[include/opcode/ChangeLog]
2001-10-17 Chris Demetriou <cgd@broadcom.com>
* mips.h (INSN_SB1): New cpu-specific instruction bit.
(OPCODE_IS_MEMBER): Allow instructions matching INSN_SB1
if cpu is CPU_SB1.
[opcodes/ChangeLog]
2001-10-17 Chris Demetriou <cgd@broadcom.com>
* mips-dis.c (mips_isa_type): Make the ISA used to disassemble
SB-1 binaries include instructions specific to the SB-1.
* mips-opc.c (SB1): New definition.
(mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
"recip.ps", "rsqrt.ps", and "sqrt.ps".
Jason Eckhardt <jle@redhat.com>
* mips-dis.c: Add support for bfd_mach_mipsisa32 and
bfd_mach_mipsisa64. Remove bfd_mach_mips32, bfd_mach_mips32_4k,
bfd_mach_mips64.
Richard Sandiford
Maciej W. Rozycki
Catherine Moore
Chao-ying Fu
Andrew Pinski
Michael Eager
Nick Clifton
Alan Modra
Thomas Schwinge
Maxim Kuvyrkov
Pierre Muller
Mingjie Xing
Joseph Myers
Thiemo Seufer
Adam Nemet
Mark Shinwell
Jim Wilson
Fred Fish
Chris Demetriou
Alexandre Oliva
Eric Christopher
Andreas Jaeger
Kazu Hirata