Add missing documentation for the debugredirect setting.
Add description and uses of gdb.in/gdb.cmd to the testsuite README.
Mention this in the NEWS file.
gdb/ChangeLog:
* NEWS: Add debugredirect and testsuite sections.
gdb/doc/ChangeLog:
* gdb.texinfo (Shell Commands): Add debugredirect.
gdb/testsuite/ChangeLog:
* README (Re-running Tests Outside The Testsuite): New section.
This solves an assertion failure when a remote provides a target
description which only refers to floating point registers by their
hardware name (e.g. f0), rather than their ABI name (e.g. ft0). GDB
assumed that should the floating point register feature be presented,
it would contain a register called ft0.
The floating point length is now instead determined by searching for
the same register, but looking for any of its aliases.
gdb/ChangeLog:
* riscv-tdep.c (riscv_gdbarch_init): Support determining flen from
target descriptions using exclusively floating point register name
aliases.
The archive element cache needs tidying when closing an archive element.
This patch fixes these failures:
-FAIL: ar long file names (bfdtest1)
-FAIL: ar thin archive (bfdtest1)
-FAIL: ar thin archive with nested archive (bfdtest1)
* som.c (som_bfd_free_cached_info): Call
_bfd_generic_close_and_cleanup.
This option (also implied by --traditional) causes '$' to introduce
literal hexadecimal constants, rather than the modern convention '0x'.
gas/
* config/tc-s12z.c (s12z_strtol): New function. (md_show_usage): Update.
(md_parse_option): new case OPTION_DOLLAR_HEX. (s12z_init_after_args):
(<global>): Use s12z_strtol instead of strtol.
* doc/c-s12z.texi (S12Z Options): Document new option -mdollar-hex.
* testsuite/gas/s12z/dollar-hex.d: New file.
* testsuite/gas/s12z/dollar-hex.s: New file.
* testsuite/gas/s12z/s12z.exp: Add them.
In this commit:
commit 34d11c682f
Date: Fri May 3 15:23:55 2019 +0100
gdb/fortran: Use floatformats_ia64_quad for fortran 16-byte floats
GDB was changed such that the Fortran's 16-byte float format was
obtained by calling gdbarch_floatformat_for_type instead of just using
gdbarch_long_double_format as it was before.
The problem with this default_floatformat_for_type can return NULL in
some cases, and the code introduced in 34d11c682f didn't consider
this.
This commit introduces several alternative strategies for finding a
suitable 16-byte floating point type. First GDB calls
gdbarch_floatformat_for_type (this was what 34d11c682f added), if this
returns null GDB will use gdbarch_long_double_format if it is the
correct size (this was the format used before 34d11c682f). Finally,
if neither of the above provides a suitable type then GDB will create
a new dummy type.
This final dummy type is unlikely to provide an correct debug
experience as far as examining the 16-byte floats, but it should
prevent GDB crashing.
gdb/ChangeLog:
PR gdb/18644:
* f-lang.c (build_fortran_types): Handle the case where
gdbarch_floatformat_for_type returns a nullptr.
bfd/
* elfxx-mips.c (_bfd_mips_elf_check_relocs): Add NULL pointer
checks. Search the RELA table for n64 relocations.
ld/
* testsuite/ld-mips-elf/pic-reloc-5.d: New test.
* testsuite/ld-mips-elf/pic-reloc-6.d: New test.
* testsuite/ld-mips-elf/pic-reloc-7.d: New test.
* testsuite/ld-mips-elf/pic-reloc-5.s: New test source.
* testsuite/ld-mips-elf/pic-reloc-6.s: New test source.
* testsuite/ld-mips-elf/pic-reloc-7.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
This patch makes changes to the <spec_reg> operand for VMRS and VMSR
instructions as per the Armv8.1-M Mainline.
New <spec_reg> options to support are:
0b0010: FPSCR_nzcvqc, access to FPSCR condition and saturation flags.
0b1100: VPR, privileged only access to the VPR register.
0b1101: P0, access to VPR.P0 predicate fields
0b1110: FPCXT_NS, enables saving and restoring of Non-secure floating
point context.
0b1111: FPCXT_S, enables saving and restoring of Secure floating point
context
*** gas/ChangeLog ***
2019-05-21 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (parse_operands): Update case OP_RVC to
parse p0 and P0.
(do_vmrs): Add checks for valid operands with respect to
cpu and fpu options.
(do_vmsr): Likewise.
(reg_names): New reg_names for FPSCR_nzcvqc, VPR, FPCXT_NS
and FPCXT_S.
* testsuite/gas/arm/armv8_1-m-spec-reg.d: New.
* testsuite/gas/arm/armv8_1-m-spec-reg.s: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad1.d: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad2.d: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad3.d: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad1.l: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad2.l: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad3.l: New.
* testsuite/gas/arm/vfp1xD.d: Updated to allow new valid values.
* testsuite/gas/arm/vfp1xD_t2.d: Likewise.
*** opcodes/ChangeLog ***
2019-05-21 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (coprocessor_opcodes): New instructions for VMRS
and VMSR with the new operands.
This patch adds the following instructions which are part of the
Armv8.1-M Mainline:
CINC
CINV
CNEG
CSINC
CSINV
CSNEG
CSET
CSETM
CSEL
gas/ChangeLog:
2019-05-21 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (TOGGLE_BIT): New.
(T16_32_TAB): New entries for cinc, cinv, cneg, csinc,
csinv, csneg, cset, csetm and csel.
(operand_parse_code): New OP_RR_ZR.
(parse_operand): Handle case for OP_RR_ZR.
(do_t_cond): New.
(insns): New instructions for cinc, cinv, cneg, csinc,
csinv, csneg, cset, csetm, csel.
* testsuite/gas/arm/armv8_1-m-cond-bad.d: New test.
* testsuite/gas/arm/armv8_1-m-cond-bad.l: New test.
* testsuite/gas/arm/armv8_1-m-cond-bad.s: New test.
* testsuite/gas/arm/armv8_1-m-cond.d: New test.
* testsuite/gas/arm/armv8_1-m-cond.s: New test.
opcodes/ChangeLog:
2019-05-21 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (enum mve_instructions): New enum
for csinc, csinv, csneg, csel, cset, csetm, cinv, cinv
and cneg.
(mve_opcodes): New instructions as above.
(is_mve_encoding_conflict): Add cases for csinc, csinv,
csneg and csel.
(print_insn_mve): Accept new %<bitfield>c and %<bitfield>C.
The MIPS64R6 TRM requires that the source register for DAUI
not be r0.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS64
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00087, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 67-68.
gas/
* testsuite/gas/mips/r6-branch-constraints.s: Rename to ...
* testsuite/gas/mips/r6-reg-constraints.s: this and add test
case for DAUI.
* testsuite/gas/mips/r6-branch-constraints.l: Rename to ...
* testsuite/gas/mips/r6-reg-constraints.l: this and add test
for DAUI.
* testsuite/gas/mips/mips.exp: Rename test from
r6-branch-constraints to r6-reg-constraints.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Change source register
constraint for DAUI.
Add a new option to get the linker to emit PLTs that use compact
branches instead of delay slot branches.
bfd/
* elfxx-mips.c (LA25_BC): New macro.
(mips_elf_link_hash_table)<compact_branches>: New field.
(STUB_JALRC): New macro.
(mipsr6_o32_exec_plt0_entry_compact): New array.
(mipsr6_n32_exec_plt0_entry_compact): Likewise.
(mipsr6_n64_exec_plt0_entry_compact): Likewise.
(mipsr6_exec_plt_entry_compact): Likewise.
(mips_elf_create_la25_stub): Use BC instead of J for stubs
when compact_branches is true.
(_bfd_mips_elf_finish_dynamic_symbol): Choose the compact
PLT for MIPSR6 with compact_branches. Do not reorder the
compact branches PLT. Switch the lazy stub for MIPSR6
with compact_branches to use JALRC.
(mips_finish_exec_plt): Choose the compact PLT0 for MIPSR6
when compact_branches is true.
(_bfd_mips_elf_compact_branches): New function.
* elfxx-mips.h (_bfd_mips_elf_compact_branches): New prototype.
ld/
* emultempl/mipself.em (compact_branches): New static variable.
(mips_create_output_section_statements): Call
_bfd_mips_elf_compact_branches.
(PARSE_AND_LIST_PROLOGUE): Add OPTION_COMPACT_BRANCHES and
OPTION_NO_COMPACT_BRANCHES.
(PARSE_AND_LIST_LONGOPTS): Add compact-branches,
no-compact-branches.
(PARSE_AND_LIST_OPTIONS): Add --compact-branches,
--no-compact-branches.
(PARSE_AND_LIST_ARGS_CASES): Handle the above.
* ld.texinfo: Document --compact-branches, --no-compact-branches.
* testsuite/ld-mips-elf/pic-and-nonpic-1-r6.dd: New test.
* testsuite/ld-mips-elf/pic-and-nonpic-1-r6.nd: New test.
* testsuite/ld-mips-elf/pic-and-nonpic-3a-r6.dd: New test.
* testsuite/ld-mips-elf/pic-and-nonpic-3a-r6.gd: New test.
* testsuite/ld-mips-elf/pic-and-nonpic-1a-r6.s: New test source.
* testsuite/ld-mips-elf/pic-and-nonpic-3a-r6.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
This patch fixes a hardcoded `l` specifier on a `bfd_signed_vma`.
Instead this now uses BFD_VMA_FMT which fixes the build on 32 bit
hosts.
Committed under the obvious rule.
bfd/ChangeLog:
PR ld/24373
* elfnn-aarch64.c (_bfd_aarch64_erratum_843419_branch_to_stub):
Fix print formatter.
When building gdb on ubuntu 16.04 with gcc 5.4.0, and running the gdb
testsuite we run into:
...
FAIL: gdb.linespec/explicit.exp: complete after -line: \
cmd complete "b -line argument " (timeout)
...
The failure is reproducible outside the testsuite like this:
...
$ gdb -q build/gdb/testsuite/outputs/gdb.linespec/explicit/explicit \
-ex "complete b -line argument"
Reading symbols from \
build/gdb/testsuite/outputs/gdb.linespec/explicit/explicit...
terminate called after throwing an instance of 'std::length_error'
what(): basic_string::_M_create
Aborted (core dumped)
...
The problem is here in complete_command:
...
completion_result result = complete (arg, &word, "e_char);
std::string arg_prefix (arg, word - arg);
if (result.number_matches != 0)
...
The problem is that the word variable is not initialized when
result.number_matches == 0, but the variable is still used in the arg_prefix
initialization.
Fix this by guarding the arg_prefix initialization with the
'result.number_matches != 0' test.
Build and tested on x86_64-linux.
gdb/ChangeLog:
2019-05-21 Tom de Vries <tdevries@suse.de>
PR cli/24587
* cli/cli-cmds.c (complete_command): Fix use of unitialized variable.
When building gdb on ubuntu 16.04 with gcc 5.4.0, and running the gdb
testsuite we run into failures due test-cases requiring at least c++1.
Fix this by adding -std=c++11 to those test-cases.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2019-05-21 Tom de Vries <tdevries@suse.de>
* gdb.arch/amd64-eval.exp: Require c++11.
* gdb.base/max-depth.exp: Same.
* gdb.compile/compile-cplus-array-decay.exp: Same.
* gdb.cp/meth-typedefs.exp: Same.
* gdb.cp/subtypes.exp: Same.
* gdb.cp/temargs.exp: Same.
gas/ChangeLog:
2019-05-21 Andre Vieira <andre.simoesdiasvieira@arm.com>
PR 24559
* config/tc-arm.c (move_or_literal_pool): Set size_req to 0
for MOVW replacement.
* testsuite/gas/arm/load-pseudo.s: New test input.
* testsuite/gas/arm/m0-load-pseudo.d: New test.
* testsuite/gas/arm/m23-load-pseudo.d: New test.
* testsuite/gas/arm/m33-load-pseudo.d: New test.
The Cortex-A53 erratum currently has two ways it can resolve the erratum when
using the flag --fix-cortex-a53-843419:
1) If the address is within the range of an ADR instruction it rewrites the ADRP
into an ADR, and those doesn't need the use of a veneer.
2) If the address is not within range, it adds a branch to a veneer which will
execute the final bit of the erratum workaround and branch back to the call
site.
When we do this we always generate the veneers and we always align the size of
the text section to 4KB. This is because we only know which workaround we can
use after all linking has finished and all addresses are known. This means even
though the veneers are not used, we still generate the section and we still
change the size of the input section.
This is problematic for small memory devices as this would require the user to
take about a ~4KB hit in memory even though it's not even used.
Since there's no real way to restart the linking process from the final write
phase this patch solves the issue by allowing the user more control over which
erratum workaround gets used.
Concretely this changes the option --fix-cortex-a53-843419 to take optional
arguments --fix-cortex-a53-843419[=full|adr|adrp]
- full (default): Use both ADRP and ADR workaround. This is equivalent to not
specifying any options and is the default behavior before this
patch.
- adr: Only use the ADR workaround, this will not cause any increase in binary
size but linking will fail if the referenced address is out of range of
an ADR instruction.
- adrp: Use only the ADRP workaround, this will never rewrite your ADRP.
In the cases where the user knows how big their binaries are the `adr` option
would prevent the unneeded overhead.
bfd/ChangeLog:
PR ld/24373
* bfd-in.h (enum erratum_84319_opts): New
(bfd_elf64_aarch64_set_options, bfd_elf32_aarch64_set_options): Change
int to enum erratum_84319_opts.
* bfd-in2.h: Regenerate.
* elfnn-aarch64.c (struct elf_aarch64_link_hash_table): Change
fix_erratum_843419 to use new enum, remove fix_erratum_843419_adr.
(_bfd_aarch64_add_stub_entry_after): Conditionally create erratum stub.
(aarch64_size_one_stub): Conditionally size erratum 843419 stubs.
(_bfd_aarch64_resize_stubs): Amend comment.
(elfNN_aarch64_size_stubs): Don't generate stubs when no workaround
requested.
(bfd_elfNN_aarch64_set_options): Use new fix_erratum_843419 enum.
(_bfd_aarch64_erratum_843419_branch_to_stub): Implement selection of
erratum workaround.
(clear_erratum_843419_entry): Update erratum conditional.
ld/ChangeLog:
PR ld/24373
* emultempl/aarch64elf.em (PARSE_AND_LIST_LONGOPTS): Add optional args
to flags.
* NEWS: Add changes to flag.
(PARSE_AND_LIST_OPTIONS): Update help descriptions.
(PARSE_AND_LIST_ARGS_CASES): Add new options to parser.
* testsuite/ld-aarch64/aarch64-elf.exp: Add new run_dump_tests.
* testsuite/ld-aarch64/erratum843419-adr.d: New test.
* testsuite/ld-aarch64/erratum843419-adrp.d: New test.
* testsuite/ld-aarch64/erratum843419-far-adr.d: New test.
* testsuite/ld-aarch64/erratum843419-far-full.d: New test.
* testsuite/ld-aarch64/erratum843419-far.s: New test.
* testsuite/ld-aarch64/erratum843419-full.d: New test.
* testsuite/ld-aarch64/erratum843419-near.s: New test.
* testsuite/ld-aarch64/erratum843419-no-args.d: New test.
The SVE DRAWF register names are missing from binutils, this may cause objdump
and readelf to ignore certain DRAWF output as the registers are unknown (most
notably CIEs).
This patch adds the registers in accordance to the "DWARF for ARM(r) 64-bit
Architecture (AARch64) with SVE support" documentation [1].
[1] https://developer.arm.com/docs/100985/latest/dwarf-for-the-arm-64-bit-architecture-aarch64-with-sve-support
binutils/ChangeLog:
* dwarf.c (dwarf_regnames_aarch64): Add SVE registers.
* testsuite/binutils-all/aarch64/sve-dwarf-registers.d: New test.
* testsuite/binutils-all/aarch64/sve-dwarf-registers.s: New test.
This matches the kill in gdb_file_cmd, and ensures that the command is not
sent to the gdb.in file.
When gdb.in is used as a batch file, any kill commands run before the target
is started will cause gdb to stop processing commands.
gdb/testsuite/ChangeLog:
* lib/gdbserver-support.exp (gdbserver_run): Mark kill as optional.
In an upcoming commit, I need to be able to set the prefix used
to introduce hexadecimal literal constants using a command line
flag. This is not currently possible, because the switch which
determines this (LITERAL_PREFIXDOLLAR_HEX) is a macro set at
build time.
This change substitutes it for a variable to be set at start up.
gas/ChangeLog:
* expr.c (literal_prefix_dollar_hex): New variable.
(operand)[case '$']: Use the new variable instead of the old macro.
Also, move this instance of "case '$'" next to the other one, and
enable it only in the complementary proprocessor case.
* expr.h (literal_prefix_dollar_hex): Declare it.
* config/tc-epiphany.c (md_begin): Assign literal_prefix_dollar_hex.
* config/tc-ip2k.c: ditto
* config/tc-mt.c: ditto
* config/tc-epiphany.h (LITERAL_PREFIXDOLLAR_HEX): Remove macro definition.
* config/tc-ip2k.h: ditto
* config/tc-mt.h: ditto
The range check done to transform an absolute call/jump to a pc-relative one is
off-by-one, and that causes this shortening optimization to be missed if the
branch target is right at the range boundary.
In the non-shrinkable case, the range is what is mentioned in the ISA - -4094
bytes in the backward direction, and 4096 bytes in the positive direction.
In the shrinkable case, the forward jump range increases by two bytes (deleted
because of the shortening from call/jmp to rcall/rjmp), and therefore, the
range is -4094 in the reverse, and 4098 in the positive direction.
Fix the ranges for !shrinkable and shrinkable cases, and add a test caes to
ensure jumps to max forward and backward ranges get relaxed to rjmp.
The current code to compute relative distance in the wrap around case does not
handle the edge case of the target (after adjusting for implicit PC increment)
being exactly half of the wrap around distance. This patch fixes that and adds a
testcase.
The range for a forward relative jump call is 4096 bytes ((2 * 2047) + (2 bytes
for the implicit PC increment)). If the target of the jump is at a distance of
4098 bytes, it is out of range for a forward jump - however, a backward jump can
still reach that address if pmem-wrap-around is 8192.
Assume address 0 has rjmp to address 4098. With a wrap around of 8192 and
*without* adjusting for the implicit PC increment of 2 bytes, rjmp .-4096 will
jump to address 4096 (wrap around at 8192 and decreasing addresses from then
on). Adjusting 2 bytes for the implicit PC increment, the actual target is 4098.
avr_relative_distance_considering_wrap_around though, does the wrap around only
if the passed in distance is less than half of the wrap around distance. In this
case, it is exactly equal to half (original distance 4098, adjusted distance of
4096 and wraparound of 8192), and the bypassed wrap around causes the reloc
overflow error.
Fix by wrapping around even if adjusted distance is equal to half of wrap around
distance.
On IRIX 5, every global symbol that is not explicitly labelled as
being a function is assumed to be an object. There is no reason
why IRIX behaviour should extend to all MIPS targets, so limit this
to only IRIX targets.
gas/
PR 14798
* config/tc-mips.c (s_mips_globl): Only treat symbols that are
not explicitly labelled as BSF_OBJECTs for IRIX targets.
* testsuite/gas/mips/pr14798.s: New test source.
* testsuite/gas/mips/pr14798-irix.d: New test.
* testsuite/gas/mips/pr14798.d: Likewise.
* testsuite/gas/mips/mips.exp: Run the new tests.
binutils/
PR 14798
* testsuite/binutils-all/readelf.ss-mips: Update reference output.
* testsuite/binutils-all/readelf.ss-tmips: Likewise.
ld/
PR 14798
* testsuite/ld-mips-elf/reloc-6a.s: Specify .text section for
global code symbols.
* testsuite/ld-mips-elf/reloc-6b.s: Likewise.
In an upcoming commit, I need to be able to set the prefix used
to introduce hexadecimal literal constants using a command line
flag. This is not currently possible, because the switch which
determines this (LITERAL_PREFIXDOLLAR_HEX) is a macro set at
build time.
This change substitutes it for a variable to be set at start up.
gas/ChangeLog:
* expr.c (literal_prefix_dollar_hex): New variable.
(operand)[case '$']: Use the new variable instead of the old macro.
* expr.h (literal_prefix_dollar_hex): Declare it.
* config/tc-epiphany.c (md_begin): Assign literal_prefix_dollar_hex.
* config/tc-ip2k.c: ditto
* config/tc-mt.c: ditto
* config/tc-epiphany.h (LITERAL_PREFIXDOLLAR_HEX): Remove macro definition.
* config/tc-ip2k.h: ditto
* config/tc-mt.h: ditto
PR 24569
* gprof.c (usage): Restore alphabetical sorting to short options
list. Add -r, -R and -t short options to the list.
(main): Add comment about -g and -G possibly being deprecated.
* gprof.texi: Update usage example in line with changes above.
PR gdb/18644 is caused by GDB using the wrong floating point format
for gfortran's 16-byte floating point type, including when the 16-byte
float is used as the component of a 32-byte complex type.
This commit addresses the issue in two places, first in i386-tdep.c,
there is already some code to force the use of floatformats_ia64_quad
for specific named types, this is extended to include the type names
that gfortran uses for its 16-byte floats.
Second, the builtin 16-byte float type (in f-lang.c) is changed so it
no longer uses gdbarch_long_double_format. On i386 this type is not
16-bytes, but is smaller, this is not what gfortran is expecting.
Instead we now use gdbarch_floatformat_for_type and ask for a
16-byte (128 bit) type using the common gfortran type name. This is
then spotted in i386-tdep.c (thanks to the first change above) and we
again get floatformats_ia64_quad returned.
This patch was tested on X86-64/GNU-Linux using '--target_board=unix'
and '--target_board=unix/-m32', and resolves all of the known failures
associated with PR gdb/18644. I've also added the test case from the
original bug report.
gdb/ChangeLog:
PR gdb/18644:
* f-lang.c (build_fortran_types): Use floatformats_ia64_quad for
16-byte floats.
* i386-tdep.c (i386_floatformat_for_type): Use
floatformats_ia64_quad for the 16-byte floating point component
within a fortran 32-byte complex number.
gdb/testsuite/ChangeLog:
PR gdb/18644
* gdb.fortran/complex.exp: Remove setup_kfail calls.
* gdb.fortran/printing-types.exp: Add new test.
* gdb.fortran/printing-types.f90: Add 16-byte real variable for
testing.
* gdb.fortran/type-kinds.exp (test_cast_1_to_type_kind): Remove
setup_kfail call.
Adds a constructor to 'struct cu_partial_die_info' and disables the
default constructor, preventing partially initialised instances from
being created.
Update 'find_partial_die' to return a const struct.
Users of 'find_partial_die' are updated to take account of the above
two changes.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* dwarf2read.c (struct cu_partial_die_info): Add constructor,
delete default constructor.
(find_partial_die): Update to return const struct.
(partial_die_parent_scope): Move variable declaration into scope
of its use and change its type to auto.
(guess_partial_die_structure_name): Likewise.
(partial_die_info::fixup): Likewise.
find_and_open_source casts away const, but hasn't needed to in a
while. This removes the cast and a strangely hostile comment.
gdb/ChangeLog
2019-05-17 Tom Tromey <tromey@adacore.com>
* source.c (find_and_open_source): Remove cast.
I noticed that annotate_source takes a "char *", but really should
take a "const char *". This patch fixes this.
gdb/ChangeLog
2019-05-17 Tom Tromey <tromey@adacore.com>
* annotate.c (annotate_source): Make "filename" const.
* annotate.h (annotate_source): Use const.
TRANSCRIPT is superseeded by the .in, .cmd and .debug files, and
can be removed.
gdb/testsuite/ChangeLog
* README (Running the Testsuite): Change example.
(Testsuite Parameters): Remove TRANSCRIPT.
* lib/gdb.exp: Remove TRANSCRIPT check.
Add "replay" to the list of GDBSERVER_DEBUG options. This will
cause a gdbserver.replay file to be written to the test output
directory.
At the same time switch this to a comma separated list in order
to easily handle all possible options.
The replay log is created by GDB, but has been added to
GDBSERVER_DEBUG as it is only required for gdbserver tests. To
enable it, the gdb_debug_init is overridden to allow the additional
checking, before calling the original function.
gdb/testsuite/ChangeLog:
* README (Testsuite Parameters): Add replay logging to
GDBSERVER_DEBUG.
(gdbserver,debug): Refer to GDBSERVER_DEBUG.
* lib/gdbserver-support.exp (gdbserver_start): Treat gdbserverdebug
as a comma separated list.
(gdb_debug_init): Override procedure.
When spawning gdb or gdbserver create a .cmd file in the test output
directory containing the full command line, ensuring the current gdb
instance is appended to the files so that they can be quickly matched
to the corresponding gdb.in file.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (default_gdb_spawn): Call gdb_write_cmd_file.
(gdb_write_cmd_file): New procedure.
* lib/gdbserver-support.exp (gdbserver_start): Call
gdbserver_write_cmd_file.
(gdbserver_write_cmd_file): New proedure.
When debugging testsuite failures, it can be awkward parsing gdb.log to
obtain all the commands run in order to manually re-run the test.
This patch adds the functionality to save all gdb commands to the file gdb.in
when the testsuite is run. The file is saved in the directory for the test and
if gdb is restarted then .1, .2, .3 etc is added to the filename.
Once a test has been run, the .in file can be used to re-run the test in the
following way:
gdb -x outputs/gdb.store/gdb.in outputs/gdb.store/store
The code works by intercepting send_gdb. I've added a TYPE to ensure that any
commands that would destroy the playback are kept from the log (for example the
Y from an answer to a y/n question).
Adds library function standard_output_file_with_gdb_instance to open a file
postfixed with count of the gdb instance. Ensure this count is reset when a new
.exp script is run.
I've re-run a random selection of .in files to check they do not error. Logs with
commands such as "attach <pid>" will not directly work when re-run.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (gdb_unload): Mark Y as an answer.
(delete_breakpoints): Likewise.
(gdb_run_cmd): Likewise.
(gdb_start_cmd): Likewise.
(gdb_starti_cmd): Likewise.
(gdb_internal_error_resync): Likewise.
(gdb_test_multiple): Likewise.
(gdb_reinitialize_dir): Likewise.
(default_gdb_exit): Likewise.
(gdb_file_cmd): Mark kill as optional.
(default_gdb_start): Call gdb_stdin_log_init.
(send_gdb): Call gdb_stdin_log_write.
(rerun_to_main): Mark Y as an answer.
(gdb_stdin_log_init): New function.
(gdb_stdin_log_write): Likewise.
Fix up all failures encountered when running the testsuite with
GDB_DEBUG="infrun".
Some tests rely on enabling debugging for various components. With
debugging on, this will be lost to the debug file.
Disable separate tty for mi tests when debugging. This currently
does not work.
disasm.c should send errors to the stderr instead of the logfile.
Note that enabling debug for other components might still cause
additional errors above what has been fixed here.
gdb/ChangeLog:
* disasm.c (set_disassembler_options): Send errors to stderr.
gdb/testsuite/ChangeLog:
* gdb.base/breakpoint-in-ro-region.exp: Disable when debugging.
* gdb.base/debug-expr.exp: Likewise.
* gdb.base/foll-fork.exp: Likewise.
* gdb.base/foll-vfork.exp: Likewise.
* gdb.base/fork-print-inferior-events.exp: Likewise.
* gdb.base/gdb-sigterm.exp: Likewise.
* gdb.base/gdbinit-history.exp: Likewise.
* gdb.base/osabi.exp: Likewise.
* gdb.base/sss-bp-on-user-bp-2.exp: Likewise.
* gdb.base/ui-redirect.exp: Likewise.
* gdb.gdb/unittest.exp: Likewise.
* gdb.mi/mi-break.exp: Disable separate-mi-tty when debugging.
* gdb.mi/mi-watch.exp: Likewise.
* gdb.mi/new-ui-mi-sync.exp: Likewise.
* gdb.mi/user-selected-context-sync.exp: Likewise.
* gdb.python/python.exp: Disable debug test when debugging.
* gdb.threads/check-libthread-db.exp: Disable when debugging.
* gdb.threads/signal-while-stepping-over-bp-other-thread.exp:
Likewise.
* gdb.threads/stepi-random-signal.exp: Likewise.
Add both board option and environment variable which enables gdb
debug via a comma separated list and sends it to the file gdb.debug,
located in the output directory for the current test. Document this.
Add support for the environment variable in the Makefile.
The testsuite can be run with gdb debug enabled in the following way:
make check GDB_DEBUG="infrun,target,remote"
A Test with multiple invocations of GDB will all append debug to the
same log file.
gdb/testsuite/ChangeLog:
* Makefile.in: Pass through GDB_DEBUG.
* README (Testsuite Parameters): Add GDB_DEBUG.
(gdb,debug): Add board setting.
* lib/gdb.exp (default_gdb_start): Start debugging.
(gdb_debug_enabled): New procedure.
(gdb_debug_init): Likewise.
Currently, when logging is enabled, output will be sent to both a
logfile and standard terminal output. The redirect option sends output
only to the logfile. This includes all debug output.
Add the option to redirect debug output seperately to normal
output, using the cli command:
set logging debugredirect on
By setting this and enabling logging, all output and debug will
be sent to the logfile. The user will still see all output but
no debug output.
This causes a change in behaviour for anyone currently using
logging redirect, as now only output will be redirected. Users
will have to issue the additional command above to also redirect
debug.
Expand ui-redirect.exp cover the changes.
gdb/ChangeLog:
* cli/cli-interp.c (struct saved_output_files): Add saved entry.
(cli_interp_base::set_logging): Check debug_redirect.
* cli/cli-interp.h (set_logging): Add debug_redirect parameter.
* cli/cli-logging.c (debug_redirect): Add static variable.
(pop_output_files): Add default param.
(handle_redirections): Print debug setting.
(show_logging_command): Likewise.
(_initialize_cli_logging): Add debugredirect command.
* interps.c (current_interp_set_logging): Add debug_redirect
parameter.
* interps.h (set_logging): Add debug_redirect parameter.
(current_interp_set_logging): Likewise.
* mi/mi-common.h: Likewise.
* mi/mi-interp.c (mi_interp::set_logging): Likewise.
gdb/testsuite/ChangeLog:
* gdb.base/ui-redirect.exp: Add debug redirect tests.
GNU policy is not to include trademark acknowlegements in
documentation [1]
[1] https://www.gnu.org/prep/standards/html_node/Trademarks.html
Committing as obvious.
gas/
* doc/c-arm.texi (ARM Options): Remove "(r)" and "(tm)"
* doc/c-bfin.texi (Blackfin Syntax): Remove "(r)"
Instead of using two bools to decide if the files should close when tee_file
is closed, make file one stay open and file two close. This simplifies the
use cases for it.
Inline the make_logging_output into the calling functions (the logic here
looks ugly in order to simplify a later change).
Expand ui-redirect.exp to cover the changes, similar to mi-logging.exp.
gdb/ChangeLog:
* cli/cli-interp.c (cli_interp_base::set_logging): Create tee_file
directly.
* cli/cli-interp.h (make_logging_output): Remove declaration.
* cli/cli-logging.c (make_logging_output): Remove function.
* mi/mi-interp.c (mi_interp::set_logging): Create tee_file
directly.
* ui-file.c (tee_file::tee_file): Remove bools.
(tee_file::~tee_file): Remove deletes.
* ui-file.h (tee_file): Remove bools.
gdb/testsuite/ChangeLog:
* gdb.base/ui-redirect.exp: Test redirection.
Alan Hayward
Simon Cook
Jan Vrany
Alan Modra
John Darrington
GDB Administrator
Andrew Burgess
Faraz Shahbazker
Sudakshina Das
Matthew Fortune
Tamar Christina
Tom de Vries
Andre Vieira
Senthil Kumar Selvaraj
Nick Clifton
Tom Tromey