* gencode.c (build_instruction, case JUMP): Truncate PC to 32 bits.
* interp.c (CHECKHILO): Define away.
(simSIGINT): New macro.
(membank_size): Increase from 1MB to 2MB.
(control_c): New function.
(sim_resume): Rename parameter signal to signal_number. Add local
variable prev. Call signal before and after simulate.
(sim_stop_reason): Add simSIGINT support.
(sim_warning, sim_error, dotrace, SignalException): Define as stdarg
functions always.
(sim_warning): Delete call to SignalException. Do call printf_filtered
if logfh is NULL.
(AddressTranslation): Add #ifdef DEBUG around debugging message and
a call to sim_warning.
to the OP_* declarations.
(write_template): Similarly for function templates.
* interp.c (insn, extension): Remove global variables. Instead
pass them as arguments to the OP_* functions.
* mn10300_sim.h: Remove decls for "insn" and "extension".
* simops.c (OP_*): Accept "insn" and "extension" as arguments
instead of using globals.
Starting to clean things up.
* Makefile.in: Only link in -ltermcap if it exists.
* erc32.c: Update to version 2.6a. Fix uart handling.
* exec.c: Update to version 2.6a. Add sparclite support.
* float.c: Update to version 2.6a. Convert comments to
preprocessor warnings. Add __setfpucw() for i385 hosts so floating
point exceptions work.
* func.c: Update to version 2.6a. Fix uart handling, add support
for user error traps.
* help.c: Update to version 2.6a. Add help note on user error
traps.
* interf.c: Update to version 2.6a. Fix uart handling, and add
sparclite support.
* examples/gccx: Use sparclite cross compiler, not native gcc.
* examples/srt0.S: Use "mov" rather than "wr" for manipulating
the psr register.
(REG_MDR): Define.
* simops.c: Implement "cmp", "calls", "rets", "jmp" and
a few additional random insns.
We can now function calls. We get out of crt0 into main now, then lose
when calls are nested (because don't handle movm yet).
(REG_D0, REG_A0, REG_SP): Define.
* simops.c: Implement "add", "addc" and a few other random
instructions.
Starting to simulate instructions for the mn10300. Executes some of
the crt0 code now!
* gencode.c (inst_type): Add mips16 instruction encoding types.
(GETDATASIZEINSN): Define.
(MIPS_DECODE): Add REG flag to dsllv, dsrav, and dsrlv. Add
jalx. Add LEFT flag to mfhi and mflo. Add RIGHT flag to mthi and
mtlo.
(MIPS16_DECODE): New table, for mips16 instructions.
(bitmap_val): New static function.
(struct mips16_op): Define.
(mips16_op_table): New table, for mips16 operands.
(build_mips16_operands): New static function.
(process_instructions): If PC is odd, decode a mips16
instruction. Break out instruction handling into new
build_instruction function.
(build_instruction): New static function, broken out of
process_instructions. Check modifiers rather than flags for SHIFT
bit count and m[ft]{hi,lo} direction.
(usage): Pass program name to fprintf.
(main): Remove unused variable this_option_optind. Change
``*loptarg++'' to ``loptarg++''.
(my_strtoul): Parenthesize && within ||.
* interp.c (sim_trace): If tracefh is NULL, set it to stderr.
(LoadMemory): Accept a halfword pAddr if vAddr is odd.
(simulate): If PC is odd, fetch a 16 bit instruction, and
increment PC by 2 rather than 4.
* configure.in: Add case for mips16*-*-*.
* configure: Rebuild.
(SIM_OBJS): Define.
* configure.in: Simplify using macros in ../common/aclocal.m4.
* configure: Regenerated.
* inst.h (enum sim_state): Define.
(cpu_state_type): New member `state'. Set it whenever `exception'
is set.
* compile.c (sim_callback): New global.
(sim_set_simcache_size): Renamed from sim_csize.
(sim_resume, case O_SLEEP): Add right way to decode r0 but #if 0 out
'cus it can't work. Change main loop exit test to use cpu.state.
(sim_trace): New function.
(sim_stop_reason): Add right way to set results, but #if 0 out.
(sim_size): New function.
(sim_info): Redirect calls to printf_filtered through callback.
(sim_set_callbacks): Record callback.
* run.c: Deleted, using one in ../common now.
* tconfig.in: New file.
(SIM_{OBJS,EXTRA_LIBS,EXTRA_LIBDEPS,EXTRA_ALL,EXTRA_INSTALL}): Define.
(SIM_{EXTRA_CLEAN,EXTRA_CFLAGS}): Define.
* configure.in: Simplify using macros in ../common/aclocal.m4.
Call AC_CHECK_HEADERS(stdlib.h).
* configure: Regenerated.
* config.in: New file.
* func.c (sim_set_callbacks): Delete, moved to
* interf.c (sim_set_callbacks): here.
(sim_callback): New global.
Rewrite all calls to printf_filtered to go through callback.
(sim_size,sim_trace): New functions.
(sim_{insert,remove}_breakpoint): #if 0 out.
* sis.c: #include "config.h". #include <stdlib.h> if present.
(main): Coerce fprintf arg to INIT_DISASSEMBLE_INFO to fprintf_ftype.
* sis.h: #include "callback.h".
(myname): New static global.
(main): Recognize new options -a, -c. Also recognize -h if h8/300.
Only process -c ifdef SIM_HAVE_SIMCACHE.
Only process -p/-s ifdef SIM_HAVE_PROFILE.
Parse program name from argv[0] and use in error messages.
Pass sim_args to sim_open. Pass prog_args to sim_create_inferior.
Add support for incomplete h8/300 termination indicators.
(usage): Make more verbose.
* aclocal.m4,config.in,tconfig.in,configure.in,configure: New files.
* Makefile.in,Make-common.in,callback.c: New files.
* nltvals.def,gentmap.c,gentvals.sh: New files.
* Makefile.in: Delete everything that's been moved to
../common/Make-common.in.
(SIM_OBJS): Define.
* configure.in: Simplify using macros in ../common/aclocal.m4.
* configure: Regenerated.
* config.in: New file.
* armos.c: #include config.h.
* wrapper.c (mem_size): Value is in bytes now.
(sim_callback): New global.
(arm_sim_set_profile{,_size}): Delete.
(arm_sim_set_mem_size): Rename to sim_size.
(sim_do_command): Call printf_filtered via callback.
(sim_set_callbacks): Record callback.
* d10v-sim.h (simops): Add flag is_long.
(State): Add pc_changed. Instructions which update the PC should
use the JMP macro which sets this.
(JMP): New macro. Sets the PC and the pc_changed flag.
* gencode.c (write_opcodes): Add is_long field.
* interp.c (lookup_hash): If we blindly apply a short opcode's mask
to a long opcode we could get a false match. Check the opcode size.
(hash): Add a size field to the hash table.
(sim_open): Initialize size field in hash table.
(sim_resume): Change to logic for setting the PC. Used to increment the
PC if it had not been changed. This didn't allow single-instruction loops.
Now checks the flag State.pc_changed. Also now stops when ^C is received.
(dmem_addr): Fix translation of data segments to unified memory.
(sim_ctrl_c): New function. When ^C is received, set stop_simulator flag.
* simops.c: Changed all branch and jump instructions to use new JMP macro.
(OP_20000000): Corrected trace information to show this is a ldi.l, not
a ldi.s instruction.
* interp.c (sim_size): Now allocates unified memory for imap segments
0,1,2, and 127. Initializes imap0 and imap1 to 0x1000. Initializes dmap to 0.
(sim_write): Just call xfer_mem().
(sim_read): Just call xfer_mem().
(xfer_mem): New function. Does appropriate memory mapping and copies bytes.
(dmem_addr): New function. Reads dmap register and translates data
addresses to local addresses.
(pc_addr): New function. Reads imap register and computes local address
corresponding to contents of the PC.
(sim_resume): Change to use pc_addr().
(sim_create_inferior): Change reinitialization code. Also reinitializes
imap[01] and dmap.
(sim_fetch_register): Add fake registers 32,33,34 for imap0, imap1, and dmap.
(sim_store_register): Add fake registers 32,33,34 for imap0, imap1, and dmap.
* simops.c (MEMPTR): Redefine to use dmem_addr().
(OP_5F00): Replace references to STate.imem with dmem_addr().
* d10v-sim.h (State): Remove mem_min and mem_max. Add umem[128].
(RB,SW,RW,SLW,RLW): Redefine to use dmem_addr().
(IMAP0,IMAP1,DMAP,SET_IMAP,SET_IMAP1,SET_DMAP): Define.
(OP_300, OP_400, OP_500, OP_380, OP_480, OP_501): Displacement
is zero extended for sst/sld instructions.
* v850_sim.h (SEX7): Delete. It's no longer needed (and it
was incorrect anyway).
So we properly simulate sst/sld instructions.
autoconf.
* gencode.c (write_opcodes): Pad operands field to account for
MSVC braindamage.
* simops.c: Include errno.h. Exclude SYS_chown, since MSVC
doesn't support it. (Why is this here in the first place?!?)
* v850_sim.h: Get rid of 64 bit defs. Also, get rid of #elif's.
Change number of operands in struct simops from 9 to 6. Define
SIGTRAP and SIGQUIT for MSVC.
* (map): Add support for external mem in the 1->2 meg range.
Also, abort() when memory access is way out of bounds. (Better to
die than to give wrong result. (This will be fixed later.))
* (sim_size): MEM_SIZE is now bytes, not shift factor.
and patterns.
* interp.c (sim_resume): Save and restore PC from the appropriate
register.
* (sim_fetch_register sim_store_register): Fix byte-order problem
with reading and writing registers.
* simops.c (OP_FFFF): Implement pseudo-breakpoint insn.
* interp.c (SignalException): Check for explicit terminating
breakpoint value.
* gencode.c: Pass instruction value through SignalException()
calls for Trap, Breakpoint and Syscall.
* interp.c (SquareRoot): Add HAVE_SQRT check to ensure sqrt() is
only used on those hosts that provide it.
* configure.in: Add sqrt() to list of functions to be checked for.
* config.in: Re-generated.
* configure: Re-generated.
expanding STORE RIGHT, to fix swr.
* support.h (SIGNEXTEND): If the sign bit is not set, explicitly
clear the high bits.
* interp.c (Convert): Fix fmt_single to fmt_long to not truncate.
Fix float to int conversions to produce signed values.
* run.c (main): Explicitly cast malloc() parameter.
This is needed because for certain builds the size field being given
to malloc() is actually 64bits long, and without a cast or malloc
prototype the resulting value used by malloc() depended on the host
endianness, and how long long paramaters are passed into functions.
* interp.c (sim_monitor): Improved monitor printf
simulation. Tidied up simulator warnings, and added "--log" option
for directing warning message output.
* gencode.c: Use sim_warning() rather than WARNING macro.
when compiling with GCC. Simplify.
* simpos.c: Explicitly include "sys/syscall.h". Remove
some #if 0'd code. Enable more emulated syscalls.
Checking in more stuff.
Remove test code. Remove #if 0 code.
* interp.c: Provide prototypes for all static functions.
Fix minor indention problems.
(sim_open, sim_resume): Remove unused variables.
(sim_read): Return type is "int".
* simops.c: Remove unused variables.
(divh): Make result of divide-by-zero zero.
(setf): Initialize result to keep compiler quiet.
(sar instructions): These just clear the overflow bit.
* v850_sim.h: Provide prototypes for put_byte, put_half
and put_word.
Cleaning up.
(v850_callback): Declare.
(do_format_5): Fix extraction of OP[0].
(sim_size): Remove debugging printf.
(sim_set_callbacks): Do something useful.
(sim_stop_reason): Gross hacks to get c-torture running.
* simops.c: Simplify code for computing targets of bCC
insns. Invert 's' bit if 'ov' bit is set for some
instructions. Fix 'cy' bit handling for numerous
instructions. Make the simulator stop when a halt
instruction is encountered. Very crude support for
emulated syscalls (trap 0).
* v850_sim.h: Include "callback.h" and declare
v850_callback. Items in the operand array are 32bits.
Fixes & syscall stuff.
"sregs" field.
(PSW): Remove bogus definition.
* simops.c: Change condition code handling to use the psw
register within the sregs array. Handle "ldsr" and "stsr".
