In the previous design of ASPEED SOCs QEMU model, it set the boot
address at "0" which was the hardcode setting for ast10x0, ast2600,
ast2500 and ast2400.
According to the design of ast2700, it has a bootmcu(riscv-32) which
is used for executing SPL and initialize DRAM and copy u-boot image
from SPI/Flash to DRAM at address 0x400000000 at SPL boot stage.
Then, CPUs(cortex-a35) execute u-boot, kernel and rofs.
Currently, qemu not support emulate two CPU architectures
at the same machine. Therefore, qemu will only support
to emulate CPU(cortex-a35) side for ast2700 and the boot
address is "0x4 00000000".
Fixed hardcode boot address "0" for future models using
a different mapping address.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The Aspeed datasheet refers to the UART controllers
as UART1 - UART13 for the ast10x0, ast2600, ast2500
and ast2400 SoCs and the Aspeed ast2700 introduces an UART0
and the UART controllers as UART0 - UART12.
To keep the naming in the QEMU models
in sync with the datasheet, let's introduce a new UART0 device name
and do the required adjustements.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: - Kept original assert() in aspeed_soc_uart_set_chr()
- Fixed 'i' range in connect_serial_hds_to_uarts() loop ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Remove last two includes of hw/ide/intarnal.h outside of hw/ide and
replace them with newly added public header to allow moving internal.h
into hw/ide to really stop exposing it.
Fixes: a11f439a0e (hw/ide: Stop exposing internal.h to non-IDE files)
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240223142633.933694E6004@zero.eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
PCMachineClass introduces the attribute into the class hierarchy and sets it to
true. There is no sub class overriding the attribute. Commit 30d2a17b46
"hw/i386: Remove the deprecated machines 0.12 up to 0.15" removed the last
overrides of this attribute. The attribute is now unneeded and can be removed.
Fixes: 30d2a17b46 "hw/i386: Remove the deprecated machines 0.12 up to 0.15"
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240224135851.100361-5-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The attribute is of type PCIBus; reflect that in the name. It will also make the
next change more intuitive.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240224135851.100361-3-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Rather than taking a QOM name which has to be resolved, let's pass the parent
directly as pointer. This simplifies the code.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240224135851.100361-2-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Inline the sole remaining use, which is for the -usbdevice command line.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240223124406.234509-9-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
object_resolve_type_unambiguous provides a useful functionality, that
is currently emulated for example by usb_bus_find(). Move it to core
code and add error reporting for increased generality.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240223124406.234509-2-pbonzini@redhat.com>
[PMD: Fixed style]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The nubus-virtio-mmio device is a Nubus card that contains a set of 32 virtio-mmio
devices and a goldfish PIC similar to the m68k virt machine that can be plugged
into the m68k q800 machine.
There are currently a number of drivers under development that can be used in
conjunction with this device to provide accelerated and/or additional hypervisor
services to 68k Classic MacOS.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20240111102954.449462-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Whilst 128k is more than enough for a typical Declaration ROM, a C compiler
configured to produce an unstripped debug binary can generate a ROM image that
exceeds this limit. Increase the maximum size to 1Mb to help make life easier
for developers.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20240111102954.449462-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
sysbus_address_space() is not more used, remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240216153517.49422-7-philmd@linaro.org>
One of the functions of the ChipTOD is to transfer TOD to the Core
(aka PC - Pervasive Core) timebase facility.
The ChipTOD can be programmed with a target address to send the TOD
value to. The hardware implementation seems to perform this by
sending the TOD value to a SCOM address.
This implementation grabs the core directly and manipulates the
timebase facility state in the core. This is a hack, but it works
enough for now. A better implementation would implement the transfer
to the PnvCore xscom register and drive the timebase state machine
from there.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Wire the ChipTOD model to powernv9 and powernv10 machines.
Suggested-by-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The ChipTOD (for Time-Of-Day) is a chip pervasive facility in IBM POWER
(powernv) processors that keeps a time of day clock.
In particular for this model are facilities that initialise and start
the time of day clock, and that synchronise that clock to cores on the
chip, and to other chips. In this way, all cores on all chips can
synchronise timebase (TB).
This model implements functionality sufficient to run the skiboot
chiptod synchronisation procedure (with the following core timebase
state machine implementation). It does not modify the TB in the cores
where the real hardware would, because the QEMU ppc timebase
implementation is always synchronised acros all cores.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This part of the patchset connects the nest1 chiplet model to p10 chip.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The N1 chiplet handle the high speed i/o traffic over PCIe and others.
The N1 chiplet consists of PowerBus Fabric controller,
nest Memory Management Unit, chiplet control unit and more.
This commit creates a N1 chiplet model and initialize and realize the
pervasive chiplet model where chiplet control registers are implemented.
This commit also implement the read/write method for the powerbus scom
registers
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
A POWER10 chip is divided into logical units called chiplets. Chiplets
are broadly divided into "core chiplets" (with the processor cores) and
"nest chiplets" (with everything else). Each chiplet has an attachment
to the pervasive bus (PIB) and with chiplet-specific registers. All nest
chiplets have a common basic set of registers and This model will provide
the registers functionality for common registers of nest chiplet (Pervasive
Chiplet, PB Chiplet, PCI Chiplets, MC Chiplet, PAU Chiplets)
This commit implement the read/write functions of chiplet control registers.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tests the following for both P9 and P10:
- I2C master POR status
- I2C master status after immediate reset
Tests the following for powernv10-ranier only:
- Config pca9552 hotplug device pins as inputs then
Read the INPUT0/1 registers to verify all pins are high
- Connected GPIO pin tests of P10 PCA9552 device. Tests
output of pins 0-4 affect input of pins 5-9 respectively.
- PCA9554 GPIO pins test. Tests input and ouput functionality.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Specs are available here:
https://www.nxp.com/docs/en/data-sheet/PCA9554_9554A.pdf
This is a simple model supporting the basic registers for GPIO
mode. The device also supports an interrupt output line but the
model does not yet support this.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The Power Hypervisor code expects to see a pca9552 device connected
to the 3rd PNV I2C engine on port 1 at I2C address 0x63 (or left-
justified address of 0xC6). This is used by hypervisor code to
control PCIe slot power during hotplug events.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Allow external devices to drive pca9552 input pins by adding
input GPIO's to the model. This allows a device to connect
its output GPIO's to the pca9552 input GPIO's.
In order for an external device to set the state of a pca9552
pin, the pin must first be configured for high impedance (LED
is off). If the pca9552 pin is configured to drive the pin low
(LED is on), then external input will be ignored.
Here is a table describing the logical state of a pca9552 pin
given the state being driven by the pca9552 and an external device:
PCA9552
Configured
State
| Hi-Z | Low |
------+------+-----+
External Hi-Z | Hi | Low |
Device ------+------+-----+
State Low | Low | Low |
------+------+-----+
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
spapr_irq_init currently uses existing macro SPAPR_XIRQ_BASE to refer to
the range of CPU IPIs during initialization of nr-irqs property.
It is more appropriate to have its own define which can be further
reused as appropriate for correct interpretation.
Suggested-by: Cedric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Kowshik Jois <kowsjois@linux.ibm.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Since 'softmmu' is quite a loaded term in QEMU, rename the vhyp MMU
facilities to use the vhyp_mmu_ prefix rather than softmmu_.
vhyp_mmu_ is chosen because the code that manipulates the hash table
via guest software hypercalls is QEMU's implementation of the PAPR
hypervisor interface, called vhyp.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[npiggin: Pick a different name, explain it in changelog.]
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
- Remove sysbus_add_io (Phil)
- Build PPC 4xx PCI host bridges once (Phil)
- Display QOM path while debugging SMBus targets (Joe)
- Simplify x86 PC code (Bernhard)
- Remove qemu_[un]register_reset() calls in x86 PC CMOS (Peter)
- Fix wiring of ICH9 LPC interrupts (Bernhard)
- Split core IDE as device / bus / dma (Thomas)
- Prefer QDev API over QOM for devices (Phil)
- Fix invalid use of DO_UPCAST() in Leon3 (Thomas)
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmXXQ1IACgkQ4+MsLN6t
wN4e2xAAig55EJh/JwpdGx55rFUab3Ay22jgXrExmBir8hzhyzssY+RUj2ALRa5e
T26kxCEqiuT549FtWm/ci6kVax0QD6bqz/6/j451XB9469Z/3BDOV5rhsqF6zlr5
BMbyC8PKnMUluG8v1ZuRjC3m2lK3ZvkVnZtj7SZUR50ssEnR32fVIziN14/OYkts
2B24sLrnLBfvyatMRsuFqGWrcbtMdnwNpjenGfDPOTF33W1sxTQ8GSvx1RV32l69
Yr/iCVoCl+rGxbLLP1TwqtOwzk32p8RsbIt6rWMqVMv/p5F6ezFeiOk7VHnnEJRH
e7TPxt4XeLGPARMQLT3gQh0MGIIodanSHePRBkczuNmKYTJrz+5jMu2Qg4MmMUE/
TV0fKgdjh/edhAOHzJgZqLmNV71icl8WBjfsw2qT4ZwgJzWq7YM2/XZKkeWhk2nQ
whLxfgiU4PNJ6vHhebJNjOovCYQTK2FbXR+PvVn5FEbH4CuFr8mqkYc+vNYM9dLA
b7uMk1H8kcb5+kqfPPU2lVd1wO7uqhxYOYU2O9nYq8aw7ioLoLeEdj2IicLtrA/H
GMtyA5cYeabeRzSXF30tM2AR1uQ/e4Z7oNxW6z3GVK1NrQtKilqPgMKut8uWYvva
crJLpRQhGiY3sDrIkkCcAHzv256dZaJNLR1KPViaHOyVPZV+x2s=
=+h2O
-----END PGP SIGNATURE-----
Merge tag 'hw-misc-20240222' of https://github.com/philmd/qemu into staging
Misc HW patch queue
- Remove sysbus_add_io (Phil)
- Build PPC 4xx PCI host bridges once (Phil)
- Display QOM path while debugging SMBus targets (Joe)
- Simplify x86 PC code (Bernhard)
- Remove qemu_[un]register_reset() calls in x86 PC CMOS (Peter)
- Fix wiring of ICH9 LPC interrupts (Bernhard)
- Split core IDE as device / bus / dma (Thomas)
- Prefer QDev API over QOM for devices (Phil)
- Fix invalid use of DO_UPCAST() in Leon3 (Thomas)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmXXQ1IACgkQ4+MsLN6t
# wN4e2xAAig55EJh/JwpdGx55rFUab3Ay22jgXrExmBir8hzhyzssY+RUj2ALRa5e
# T26kxCEqiuT549FtWm/ci6kVax0QD6bqz/6/j451XB9469Z/3BDOV5rhsqF6zlr5
# BMbyC8PKnMUluG8v1ZuRjC3m2lK3ZvkVnZtj7SZUR50ssEnR32fVIziN14/OYkts
# 2B24sLrnLBfvyatMRsuFqGWrcbtMdnwNpjenGfDPOTF33W1sxTQ8GSvx1RV32l69
# Yr/iCVoCl+rGxbLLP1TwqtOwzk32p8RsbIt6rWMqVMv/p5F6ezFeiOk7VHnnEJRH
# e7TPxt4XeLGPARMQLT3gQh0MGIIodanSHePRBkczuNmKYTJrz+5jMu2Qg4MmMUE/
# TV0fKgdjh/edhAOHzJgZqLmNV71icl8WBjfsw2qT4ZwgJzWq7YM2/XZKkeWhk2nQ
# whLxfgiU4PNJ6vHhebJNjOovCYQTK2FbXR+PvVn5FEbH4CuFr8mqkYc+vNYM9dLA
# b7uMk1H8kcb5+kqfPPU2lVd1wO7uqhxYOYU2O9nYq8aw7ioLoLeEdj2IicLtrA/H
# GMtyA5cYeabeRzSXF30tM2AR1uQ/e4Z7oNxW6z3GVK1NrQtKilqPgMKut8uWYvva
# crJLpRQhGiY3sDrIkkCcAHzv256dZaJNLR1KPViaHOyVPZV+x2s=
# =+h2O
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 22 Feb 2024 12:51:30 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'hw-misc-20240222' of https://github.com/philmd/qemu: (32 commits)
hw/sparc/leon3: Fix wrong usage of DO_UPCAST macro
hw/ide: Stop exposing internal.h to non-IDE files
hw/ide: Remove the include/hw/ide.h legacy file
hw/ide: Move IDE bus related definitions to a new header ide-bus.h
hw/ide: Move IDE device related definitions to ide-dev.h
hw/ide: Move IDE DMA related definitions to a separate header ide-dma.h
hw/ide: Split qdev.c into ide-bus.c and ide-dev.c
hw/ide: Add the possibility to disable the CompactFlash device in the build
hw/acpi/ich9_tco: Include missing 'migration/vmstate.h' header
hw/acpi/cpu: Use CPUState typedef
hw/acpi: Include missing 'qapi/qapi-types-acpi.h' generated header
hw/isa/meson.build: Sort alphabetically
hw/i386/pc_q35: Populate interrupt handlers before realizing LPC PCI function
hw/i386/pc_sysfw: Use qdev_is_realized() instead of QOM API
hw/i386/pc_sysfw: Inline pc_system_flash_create() and remove it
hw/i386/pc: Confine system flash handling to pc_sysfw
hw/i386/pc: Defer smbios_set_defaults() to machine_done
hw/i386/pc: Merge pc_guest_info_init() into pc_machine_initfn()
hw/i386/x86: Turn apic_xrupt_override into class attribute
hw/i386/pc: Do pc_cmos_init_late() from pc_machine_done()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# include/hw/i386/pc.h
include/hw/ide/internal.h is currently included by include/hw/ide/pci.h
and thus exposed to a lot of files that are not part of the IDE subsystem.
Stop including internal.h there and use the appropriate new headers
ide-bus.h and ide-dma.h instead.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20240220085505.30255-8-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
There was only one prototype left in this legacy file. Move it to
ide-dev.h to finally get rid of it.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20240220085505.30255-7-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Let's consolidate the public IDE bus related functions in a separate
header.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240220085505.30255-6-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Untangle internal.h by moving public IDE device related
definitions to ide-dev.h.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240220085505.30255-5-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These definitions are required outside of the hw/ide/ code, too,
so lets's move them from internal.h to a new header called ide-dma.h.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240220085505.30255-4-thuth@redhat.com>
[PMD: Use IDEDMAOps typedef in struct IDEDMA]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
For distros like downstream RHEL, it would be helpful to allow to disable
the CompactFlash device. For making this possible, we need a separate
Kconfig switch for this device, and the code should reside in a separate
file. Let's also introduce a new header ide-dev.h which can be used to
collect definitions related to IDE devices.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20240220085505.30255-2-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
We need the VMStateDescription structure definition from
"migration/vmstate.h" in order to declare vmstate_tco_io_sts.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20240219141412.71418-4-philmd@linaro.org>
ACPIOSTInfo is a QAPI generated structure:
$ git grep -w ACPIOSTInfo
qapi/acpi.json:81:# @ACPIOSTInfo:
qapi/acpi.json:99:{ 'struct': 'ACPIOSTInfo',
qapi/acpi.json:109:# Return a list of ACPIOSTInfo for devices that support status
Include the "qapi/qapi-types-acpi.h" header to avoid the following
errors when including "hw/acpi/cpu.h" or "hw/acpi/memory_hotplug.h"
elsewhere:
include/hw/acpi/cpu.h:67:52: error: unknown type name 'ACPIOSTInfoList'
void acpi_cpu_ospm_status(CPUHotplugState *cpu_st, ACPIOSTInfoList ***list);
^
include/hw/acpi/memory_hotplug.h:51:55: error: unknown type name 'ACPIOSTInfoList'
void acpi_memory_ospm_status(MemHotplugState *mem_st, ACPIOSTInfoList ***list);
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20240219141412.71418-2-philmd@linaro.org>
Rather than distributing PC system flash handling across three files, let's
confine it to one. Now, pc_system_firmware_init() creates, configures and cleans
up the system flash which makes the code easier to understand. It also avoids
the extra call to pc_system_flash_cleanup_unused() in the Xen case.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240208220349.4948-7-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Handling most of smbios data generation in the machine_done notifier is similar
to how the ARM virt machine handles it which also calls smbios_set_defaults()
there. The result is that all pc machines are freed from explicitly worrying
about smbios setup.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240208220349.4948-6-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Resolves redundant code in the piix and q35 machines.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240208220349.4948-5-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The attribute isn't user-changeable and only true for pc-based machines. Turn it
into a class attribute which allows for inlining pc_guest_info_init() into
pc_machine_initfn().
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240208220349.4948-4-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add the two IDE bus BusState pointers to the set we keep in PCMachineState.
This allows us to avoid passing them to pc_cmos_init(), and also will
allow a refactoring of how we call pc_cmos_init_late().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[PMD: Do not zero-init pcms->idebus[] again]
Message-ID: <20240220160622.114437-2-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
sysbus_add_io(...) is a simple wrapper to
memory_region_add_subregion(get_system_io(), ...).
It is used in 3 places; inline it directly.
Rationale: we want to move to an explicit I/O bus,
rather that an implicit one. Besides in heterogeneous
setup we can have more than one I/O bus.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240216150441.45681-1-philmd@linaro.org>
[PMD: Include missing "exec/address-spaces.h" header]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Since the named GPIO lines are a "public" interface to the device,
we can directly call qdev_connect_gpio_out_named(), making it
consistent with how the other A20 input source (port92) is wired.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Message-Id: <20211218130437.1516929-6-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Correct typos automatically found with the `typos` tool
<https://crates.io/crates/typos>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Correct typos automatically found with the `typos` tool
<https://crates.io/crates/typos>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Correct typos automatically found with the `typos` tool
<https://crates.io/crates/typos>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Correct typos automatically found with the `typos` tool
<https://crates.io/crates/typos>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
(mjt: fix comment style as suggested by Philippe)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Correct typos automatically found with the `typos` tool
<https://crates.io/crates/typos>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Since pc_madt_cpu_entry() is only used by:
- hw/i386/acpi-build.c // single call
- hw/i386/acpi-common.c // definition
there is no need to expose it outside of hw/i386/.
Declare it in "acpi-common.h".
acpi-build.c doesn't need "hw/i386/pc.h" anymore.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
HPET_INTCAP is specific to TYPE_HPET, so define it there.
hpet.c doesn't need to include "hw/i386/pc.h" anymore.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Allow boards to use the device creation functions even if USB itself
is not available; of course the functions will fail inexorably, but
this can be okay if the calls are conditional on the existence of
some USB host controller device. This is for example the case for
hw/mips/loongson3_virt.c.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
pc_machine_kvm_type() was introduced by commit e21be724ea ("i386/xen:
add pc_machine_kvm_type to initialize XEN_EMULATE mode") to do Xen
specific initialization by utilizing kvm_type method.
commit eeedfe6c63 ("hw/xen: Simplify emulated Xen platform init")
moves the Xen specific initialization to pc_basic_device_init().
There is no need to keep the PC specific kvm_type() implementation
anymore. So we'll fallback to kvm_arch_get_default_type(), which
simply returns 0.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20231007065819.27498-1-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No need to duplicate AHCIState::ports, directly access it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240213081201.78951-9-philmd@linaro.org>
AHCIState::ports should be unsigned. Besides, we never
check it for negative value. It is unlikely it was ever
used with more than INT32_MAX ports, so it is safe to
convert it to unsigned.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240213081201.78951-7-philmd@linaro.org>
Since ahci_ide_create_devs() is not PCI specific, pass
it an AHCIState argument instead of PCIDevice.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240213081201.78951-6-philmd@linaro.org>
Introduce the 'ich9' variable and inline ahci_get_num_ports().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240213081201.78951-5-philmd@linaro.org>
In order to be able to QOM-embed a structure, we need
its full definition. Move it from "ahci_internal.h"
to the new "hw/ide/ahci-pci.h" header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240213081201.78951-3-philmd@linaro.org>
Now there is an ncpus property, use it in order to deliver the IRQ to
multiple CPU.
Co-developed-by: Frederic Konrad <konrad.frederic@yahoo.fr>
Signed-off-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240131085047.18458-5-chigot@adacore.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Split out the headers for each peripherals and move them in their
right hardware directory.
Update Copyright and add SPDX-License-Identifier at the same time.
Co-developed-by: Frederic Konrad <konrad.frederic@yahoo.fr>
Signed-off-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240131085047.18458-2-chigot@adacore.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Instead of filling an array of all the possible IRQs, only call
qdev_get_gpio_in() when an IRQ is used. Remove the array from
RX62NState. Doing so we avoid calling qdev_get_gpio_in() on an
unrealized device.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240213130341.1793-4-philmd@linaro.org>
"qemu/units.h" is not used in the "hw/rx/rx62n.h"
header, include it in the source where it is.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240213130341.1793-3-philmd@linaro.org>
This field is not set. Remove it along with the dead
code it was guarding.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240209090513.9401-7-philmd@linaro.org>
Since previous commit the MIPSITUState::cpu0 field is not
used anymore. Remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240209090513.9401-6-philmd@linaro.org>
Previous commit removed the MT*C0(SAAR) helpers which
were the only calls to itc_reconfigure() out of hw/,
we can reduce its scope and declare it statically.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240209090513.9401-3-philmd@linaro.org>
The MPS2 SCC device is broadly the same for all FPGA images, but has
minor differences in the behaviour of the CFG registers depending on
the image. In many cases we don't really care about the functionality
controlled by these registers and a reads-as-written or similar
behaviour is sufficient for the moment.
For the AN536 the required behaviour is:
* A_CFG0 has CPU reset and halt bits
- implement as reads-as-written for the moment
* A_CFG1 has flash or ATCM address 0 remap handling
- QEMU doesn't model this; implement as reads-as-written
* A_CFG2 has QSPI select (like AN524)
- implemented (no behaviour, as with AN524)
* A_CFG3 is MCC_MSB_ADDR "additional MCC addressing bits"
- QEMU doesn't care about these, so use the existing
RAZ behaviour for convenience
* A_CFG4 is board rev (like all other images)
- no change needed
* A_CFG5 is ACLK frq in hz (like AN524)
- implemented as reads-as-written, as for other boards
* A_CFG6 is core 0 vector table base address
- implemented as reads-as-written for the moment
* A_CFG7 is core 1 vector table base address
- implemented as reads-as-written for the moment
Make the changes necessary for this; leave TODO comments where
appropriate to indicate where we might want to come back and
implement things like CPU reset.
The other aspects of the device specific to this FPGA image (like the
values of the board ID and similar registers) will be set via the
device's qdev properties.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240206132931.38376-8-peter.maydell@linaro.org
An access fault is raised when the Access Flag is not set in the
looked-up PTE and the AFFD field is not set in the corresponding context
descriptor. This was already implemented for stage 2. Implement it for
stage 1 as well.
Signed-off-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Mostafa Saleh <smostafa@google.com>
Message-id: 20240213082211.3330400-1-luc.michel@amd.com
[PMM: tweaked comment text]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Armv8.1+ CPUs have the Virtual Host Extension (VHE) which adds a
non-secure EL2 virtual timer. We implemented the timer itself in the
CPU model, but never wired up its IRQ line to the GIC.
Wire up the IRQ line (this is always safe whether the CPU has the
interrupt or not, since it always creates the outbound IRQ line).
Report it to the guest via dtb and ACPI if the CPU has the feature.
The DTB binding is documented in the kernel's
Documentation/devicetree/bindings/timer/arm\,arch_timer.yaml
and the ACPI table entries are documented in the ACPI specification
version 6.3 or later.
Because the IRQ line ACPI binding is new in 6.3, we need to bump the
FADT table rev to show that we might be using 6.3 features.
Note that exposing this IRQ in the DTB will trigger a bug in EDK2
versions prior to edk2-stable202311, for users who use the virt board
with 'virtualization=on' to enable EL2 emulation and are booting an
EDK2 guest BIOS, if that EDK2 has assertions enabled. The effect is
that EDK2 will assert on bootup:
ASSERT [ArmTimerDxe] /home/kraxel/projects/qemu/roms/edk2/ArmVirtPkg/Library/ArmVirtTimerFdtClientLib/ArmVirtTimerFdtClientLib.c(72): PropSize == 36 || PropSize == 48
If you see that assertion you should do one of:
* update your EDK2 binaries to edk2-stable202311 or newer
* use the 'virt-8.2' versioned machine type
* not use 'virtualization=on'
(The versions shipped with QEMU itself have the fix.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Message-id: 20240122143537.233498-3-peter.maydell@linaro.org
vhost-user-snd support
x2APIC mode with TCG support
CXL update to r3.1
fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmXMoXUPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpFtMIAKUKD0hzJrwOyPo4xsRUMbsB3ehIsJsMKfOK
w+JWzTaojAG8ENPelWBdL2sEIs5U73VOchjLqHbH2m5sz6GJ13214amvdU/fYc8+
/dU2ZKoAmaR5L1ovKO/fq07y/J6DrITZ5tosy2i84Xa8EnsL4j3wEPNVWsDi7dna
mvXUICSOOoJQ4O2YhSruKCQ8qIgF1/0Oi3u/rcrW3alSs8VQlrtQXxl6k+LbYqek
+Fytco3jMRHPvQ+GYUIwGuHjN15ghArcvbsV0GIa+24BPY5h7YbDYGbfasePT5OK
zDz51jitkoyDrQr+OzwOEe/X5+dVGhayRXfMtU5Qm53IE3y61qc=
=K4b1
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, cleanups, fixes
vhost-user-snd support
x2APIC mode with TCG support
CXL update to r3.1
fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmXMoXUPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpFtMIAKUKD0hzJrwOyPo4xsRUMbsB3ehIsJsMKfOK
# w+JWzTaojAG8ENPelWBdL2sEIs5U73VOchjLqHbH2m5sz6GJ13214amvdU/fYc8+
# /dU2ZKoAmaR5L1ovKO/fq07y/J6DrITZ5tosy2i84Xa8EnsL4j3wEPNVWsDi7dna
# mvXUICSOOoJQ4O2YhSruKCQ8qIgF1/0Oi3u/rcrW3alSs8VQlrtQXxl6k+LbYqek
# +Fytco3jMRHPvQ+GYUIwGuHjN15ghArcvbsV0GIa+24BPY5h7YbDYGbfasePT5OK
# zDz51jitkoyDrQr+OzwOEe/X5+dVGhayRXfMtU5Qm53IE3y61qc=
# =K4b1
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 14 Feb 2024 11:18:13 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (60 commits)
MAINTAINERS: Switch to my Enfabrica email
virtio-gpu-rutabaga.c: override resource_destroy method
virtio-gpu.c: add resource_destroy class method
hw/display/virtio-gpu.c: use reset_bh class method
hw/smbios: Fix port connector option validation
hw/smbios: Fix OEM strings table option validation
virtio-gpu: Correct virgl_renderer_resource_get_info() error check
hw/cxl: Standardize all references on CXL r3.1 and minor updates
hw/cxl: Update mailbox status registers.
hw/cxl: Update RAS Capability Definitions for version 3.
hw/cxl: Update link register definitions.
hw/cxl: Update HDM Decoder capability to version 3
tests/acpi: Update DSDT.cxl to reflect change _STA return value.
hw/i386: Fix _STA return value for ACPI0017
tests/acpi: Allow update of DSDT.cxl
hw/mem/cxl_type3: Fix potential divide by zero reported by coverity
hw/cxl: Pass NULL for a NULL MemoryRegionOps
hw/cxl: Pass CXLComponentState to cache_mem_ops
hw/cxl/device: read from register values in mdev_reg_read()
hw/cxl/mbox: Remove dead code
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When destroying/unrefing resources, devices such as virtio-gpu-rutabaga
need to do their own bookkeeping (free rutabaga resources that are
associated with the virtio_gpu_simple_resource).
This commit adds a class method so that virtio-gpu-rutabaga can override
it in the next commit.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <b0a86630c4d601f3a269fd7e08cfefc13bd4e219.1706626470.git.manos.pitsidianakis@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Previously not all references mentioned any spec version at all.
Given r3.1 is the current specification available for evaluation at
www.computeexpresslink.org update references to refer to that.
Hopefully this won't become a never ending job.
A few structure definitions have been updated to add new fields.
Defaults of 0 and read only are valid choices for these new DVSEC
registers so go with that for now.
There are additional error codes and some of the 'questions' in
the comments are resolved now.
Update documentation reference to point to the CXL r3.1 specification
with naming closer to what is on the cover.
For cases where there are structure version numbers, add defines
so they can be found next to the register definitions.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126121636.24611-6-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Whilst the reported version was 1 so there should be no changes,
a couple of fields (where the value 0 was valid) were not
defined. Make those explicit and update references to be based
on CXL r3.1.
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126121636.24611-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Part of bringing all of CXL emulation inline with CXL r3.1.
No functional changes.
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126121636.24611-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Not actually implemented, but we need to reserve more space for
the larger version of the structure in CXL r3.1.
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126121636.24611-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Part of standardizing the QEMU code on CXL r3.1.
No fuctional changes as everything added is optional and
it is set as not implemented.
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126121636.24611-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In the current mdev_reg_read() implementation, it consistently returns
that the Media Status is Ready (01b). This was fine until commit
25a52959f9 ("hw/cxl: Add support for device sanitation") because the
media was presumed to be ready.
However, as per the CXL 3.0 spec "8.2.9.8.5.1 Sanitize (Opcode 4400h)",
during sanitation, the Media State should be set to Disabled (11b). The
mentioned commit correctly sets it to Disabled, but mdev_reg_read()
still returns Media Status as Ready.
To address this, update mdev_reg_read() to read register values instead
of returning dummy values.
Note that __toggle_media() managed to not only write something
that no one read, it did it to the wrong register storage and
so changed the reported mailbox size which was definitely not
the intent. That gets fixed as a side effect of allocating
separate state storage for this register.
Fixes: commit 25a52959f9 ("hw/cxl: Add support for device sanitation")
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126120132.24248-7-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The real SuperI/O chips emulated by QEMU allow for relocating and enabling or
disabling their SuperI/O functions via software. So far this is not implemented.
Prepare for that by adding isa_parallel_set_{enabled,iobase}.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240114123911.4877-10-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The real SuperI/O chips emulated by QEMU allow for relocating and enabling or
disabling their SuperI/O functions via software. So far this is not implemented.
Prepare for that by adding isa_serial_set_{enabled,iobase}.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240114123911.4877-9-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The real SuperI/O chips emulated by QEMU allow for relocating and enabling or
disabling their SuperI/O functions via software. So far this is not implemented.
Prepare for that by adding isa_fdc_set_{enabled,iobase}.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240114123911.4877-8-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some SuperI/O devices such as the VIA south bridges or the PC87312 controller
allow to enable or disable their SuperI/O functions. Add a convenience function
for implementing this in the VIA south bridges.
The naming of the functions is inspired by its memory_region_set_enabled()
pendant.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240114123911.4877-7-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some SuperI/O devices such as the VIA south bridges or the PC87312 controller
are able to relocate their SuperI/O functions. Add a convenience function for
implementing this in the VIA south bridges.
This convenience function relies on previous simplifications in exec/ioport
which avoids some duplicate synchronization of I/O port base addresses. The
naming of the function is inspired by its memory_region_set_address() pendant.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240114123911.4877-6-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
portio_list_add_1() creates a MemoryRegionPortioList instance which holds a
MemoryRegion `mr` and an array of MemoryRegionPortio elements named `ports`.
Each element in the array gets assigned the same value for its .base attribute.
The same value also ends up as the .addr attribute of `mr` due to the
memory_region_add_subregion() call. This means that all .base attributes are
the same as `mr.addr`.
The only usages of MemoryRegionPortio::base were in portio_read() and
portio_write(). Both functions get above MemoryRegionPortioList as their
opaque parameter. In both cases find_portio() can only return one of the
MemoryRegionPortio elements of the `ports` array. Due to above observation any
element will have the same .base value equal to `mr.addr` which is also
accessible.
Hence, `mrpio->mr.addr` is equivalent to `mrp->base` and
MemoryRegionPortio::base is redundant and can be removed.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240114123911.4877-5-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ParallelState::portio_list isn't used inside ParallelState context but only
inside ISAParallelState context, so move it there.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20240114123911.4877-4-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU populates the apic_state attribute of x86 CPUs if supported by real
hardware or if SMP is active. When handling interrupts, it just checks whether
apic_state is populated to route the interrupt to the PIC or to the APIC.
However, chapter 10.4.3 of [1] requires that:
When IA32_APIC_BASE[11] is 0, the processor is functionally equivalent to an
IA-32 processor without an on-chip APIC.
This means that when apic_state is populated, QEMU needs to check for the
MSR_IA32_APICBASE_ENABLE flag in addition. Implement this which fixes some
real-world BIOSes.
[1] Intel 64 and IA-32 Architectures Software Developer's Manual, Vol. 3A:
System Programming Guide, Part 1
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240106132546.21248-3-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit adds support for x2APIC transitions when writing to
MSR_IA32_APICBASE register and finally adds CPUID_EXT_X2APIC to
TCG_EXT_FEATURES.
The set_base in APICCommonClass now returns an integer to indicate error in
execution. apic_set_base return -1 on invalid APIC state transition,
accelerator can use this to raise appropriate exception.
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Message-Id: <20240111154404.5333-4-minhquangbui99@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit extends the APIC ID to 32-bit long and remove the 255 max APIC
ID limit in userspace APIC. The array that manages local APICs is now
dynamically allocated based on the max APIC ID of created x86 machine.
Also, new x2APIC IPI destination determination scheme, self IPI and x2APIC
mode register access are supported.
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Message-Id: <20240111154404.5333-3-minhquangbui99@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit creates apic_register_read/write which are used by both
apic_mem_read/write for MMIO access and apic_msr_read/write for MSR access.
The apic_msr_read/write returns -1 on error, accelerator can use this to
raise the appropriate exception.
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Message-Id: <20240111154404.5333-2-minhquangbui99@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch derives vhost-user-input from vhost-user-base class, so make
the input stub as a simpler boilerplate wrapper.
With the refactoring, vhost-user-input adds the property 'chardev', this
leads to conflict with the vhost-user-input-pci adds the same property.
To resolve the error, remove the duplicate property from
vhost-user-input-pci.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20231120043721.50555-5-leo.yan@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-12-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now we can take advantage of the new base class and make
vhost-user-i2c a much simpler boilerplate wrapper. Also as this
doesn't require any target specific hacks we only need to build the
stubs once.
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-6-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now the new base class supports config handling we can take advantage
and make vhost-user-gpio a much simpler boilerplate wrapper. Also as
this doesn't require any target specific hacks we only need to build
the stubs once.
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-5-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now we can take advantage of our new base class and make
vhost-user-rng a much simpler boilerplate wrapper. Also as this
doesn't require any target specific hacks we only need to build the
stubs once.
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-4-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Lets keep a cleaner split between the base class and the derived
vhost-user-device which we can use for generic vhost-user stubs. This
includes an update to introduce the vq_size property so the number of
entries in a virtq can be defined.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-2-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The __linux__ version of qemu_chr_open_pp_fd() tries to claim the
parport device with a PPCLAIM ioctl(). On success, it stores the file
descriptor in the chardev object, and returns success. On failure, it
closes the file descriptor, and returns failure.
chardev_new() then passes the Chardev to object_unref(). This duly
calls char_parallel_finalize(), which closes the file descriptor
stored in the chardev object. Since qemu_chr_open_pp_fd() didn't
store it, it's still zero, so this closes standard input. Ooopsie.
To demonstate, add a unit test. With the bug above unfixed, running
this test closes standard input. char_hotswap_test() happens to run
next. It opens a socket, duly gets file descriptor 0, and since it
tests for success with > 0 instead of >= 0, it fails.
The new unit test needs to be conditional exactly like the chardev it
tests. Since the condition is rather complicated, steal the solution
from the serial chardev: define HAVE_CHARDEV_PARALLEL in qemu/osdep.h.
This also permits simplifying chardev/meson.build a bit.
The bug fix is easy enough: store the file descriptor, and leave
closing it to char_parallel_finalize().
The next commit will fix char_hotswap_test()'s test for success.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240203080228.2766159-2-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Test fixed up for BSDs, indentation fixed up, commit message improved]
Currently the DRQ IRQ is updated every time DMA data is sent/received which
is both inefficient and causes excessive logging of the DRQ state. Add a
new drq_state bool that only updates the DRQ IRQ if its state changes.
This commit adds the new drq_state bool to the migration state: since the
version number has already been increased earlier in the series, there is
no need to repeat it again here. The DRQ IRQ is (currently) only used for
PDMA transfers which already have a migration break in this series so
there are no problems setting its value post-load.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-87-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The IRQ represented by irq_data is actually the DRQ (DMA request) line so rename
it accordingly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-86-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
According to the datasheet the previous ESP command remains in the ESP_CMD
register, which caused a problem when consecutive TI commands were issued as
it becomes impossible for the state machine to know when the first TI
command finishes.
This was the original reason for introducing the ti_cmd field which kept
track of the last written command for this purpose. However closer reading
of the datasheet shows that a TI command that terminates due to a change of
SCSI target phase resets the ESP_CMD register to zero which solves this
problem.
Now that this has been fixed in the previous commit, remove the unneeded
ti_cmd field and access the ESP_CMD register directly instead. Bump the
vmstate_esp version to indicate that the ti_cmd field is no longer included.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-64-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This field is currently used to handle deferred interrupts for the DATA IN phase
but the code will soon be updated to do the same for the DATA OUT phase.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-58-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Note that this is a migration break for the q800 machine because the extra PDMA
information is no longer included.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-57-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The special logic in write_response_pdma_cb() is now no longer required since
esp_do_dma() can be used as a direct replacement.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-55-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The special logic in satn_stop_pdma_cb() is now no longer required since
esp_do_dma() can be used as a direct replacement.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-53-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The special logic in satn_pdma_cb() is now no longer required since esp_do_dma()
can be used as a direct replacement.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-50-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This can now be handled by the existing do_dma_pdma_cb() function.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-37-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
We need values 0-3 for TCG_TYPE_I128 on 32-bit hosts.
Cc: qemu-stable@nongnu.org
Fixes: 43eef72f41 ("tcg: Add temp allocation for TCGv_i128")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2159
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Tested-by: Michael Tokarev <mjt@tls.msk.ru>
Some enhancements and fixes for the hppa target.
The major change is, that this patchset adds a new SeaBIOS-hppa firmware
which is built as 32- and 64-bit firmware.
The new 64-bit firmware is necessary to fully support 64-bit operating systems
(HP-UX, Linux, NetBSD,...).
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZcquAQAKCRD3ErUQojoP
X9pjAQCVsWyuYlGCW2paIGVWKV0vsOpwetUrbhRtFUZGqZxb4AD9FbMsXRcCN/oq
CotBPY/a8MEzIQcwYl5QbcI5nNW4ygs=
=RA0B
-----END PGP SIGNATURE-----
Merge tag 'hppa64-pull-request' of https://github.com/hdeller/qemu-hppa into staging
target/hppa: Enhancements and fixes
Some enhancements and fixes for the hppa target.
The major change is, that this patchset adds a new SeaBIOS-hppa firmware
which is built as 32- and 64-bit firmware.
The new 64-bit firmware is necessary to fully support 64-bit operating systems
(HP-UX, Linux, NetBSD,...).
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZcquAQAKCRD3ErUQojoP
# X9pjAQCVsWyuYlGCW2paIGVWKV0vsOpwetUrbhRtFUZGqZxb4AD9FbMsXRcCN/oq
# CotBPY/a8MEzIQcwYl5QbcI5nNW4ygs=
# =RA0B
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 12 Feb 2024 23:47:13 GMT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'hppa64-pull-request' of https://github.com/hdeller/qemu-hppa:
hw/hppa/machine: Load 64-bit firmware on 64-bit machines
target/hppa: Update SeaBIOS-hppa to version 16
hw/net/tulip: add chip status register values
target/hppa: PDC_BTLB_INFO uses 32-bit ints
target/hppa: Allow read-access to PSW with rsm 0,reg instruction
lasi: Add reset I/O ports for LASI audio and FDC
target/hppa: Implement do_transaction_failed handler for I/O errors
lasi: allow access to LAN MAC address registers
hw/pci-host/astro: Implement Hard Fail and Soft Fail mode
hw/pci-host/astro: Avoid aborting on access failure
target/hppa: Add "diag 0x101" for console output support
disas/hppa: Add disassembly for qemu specific instructions
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Update x86 CPU model docs and script
- Add missing close of chardev QIOChannel
- More trace events o nTKS handshake
- Drop unsafe VNC constants
- Increase NOFILE limit during startup
-----BEGIN PGP SIGNATURE-----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=61zI
-----END PGP SIGNATURE-----
Merge tag 'misc-fixes-pull-request' of https://gitlab.com/berrange/qemu into staging
- LUKS support for detached headers
- Update x86 CPU model docs and script
- Add missing close of chardev QIOChannel
- More trace events o nTKS handshake
- Drop unsafe VNC constants
- Increase NOFILE limit during startup
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE2vOm/bJrYpEtDo4/vobrtBUQT98FAmXGMNUACgkQvobrtBUQ
# T998JQ//SqQ3L/AZmhE5cIwZ1XipSMMZ/yEoVIyniA3tL41S7Oimj3O9XvY68TEG
# nnj9Oh+zOlVLxauTHAczveJ7z+XfonQZS3HrbGRUTHU+ezGVjyM618e/h9pSQtYI
# +CCkrjtey1NoT42/um4D/bKg/B2XQeulS+pD12Z9l5zbqEZiw0R9+UwVIJ52G811
# 5UQgIjJ7GNFzalxqiMCkGc0nTyU8keEXQJcdZ4droo42DnU4pZeQWGDimzP61JnW
# 1Crm6aZSuUriUbVmxJde+2eEdPSR4rr/yQ4Pw06hoi1QJALSgGYtOTo8+qsyumHd
# us/2ouMrxOMdsIk4ViAkSTiaje9agPj84VE1Z229Y/uqZcEAuX572n730/kkzqUv
# ZDKxMz0v3rzpkjFmsgj5D4yqJaQp4zn1zYm98ld7HWJVIOf3GSvpaNg9J6jwN7Gi
# HKKkvYns9pxg3OSx++gqnM32HV6nnMDFiddipl/hTiUsnNlnWyTDSvJoNxIUU5+l
# /uEbbdt8xnxx1JP0LiOhgmz6N6FU7oOpaPuJ5CD8xO2RO8D1uBRvmpFcdOTDAfv0
# uYdjhKBI+quKjE64p7gNWYCoqZtipRIJ6AY2VaPU8XHx8GvGFwBLX64oLYiYtrBG
# gkv3NTHRkMhQw9cGQcZIgZ+OLU+1eNF+m9EV7LUjuKl0HWC3Vjs=
# =61zI
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 09 Feb 2024 14:04:05 GMT
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* tag 'misc-fixes-pull-request' of https://gitlab.com/berrange/qemu:
tests: Add case for LUKS volume with detached header
crypto: Introduce 'detached-header' field in QCryptoBlockInfoLUKS
block: Support detached LUKS header creation using qemu-img
block: Support detached LUKS header creation using blockdev-create
crypto: Modify the qcrypto_block_create to support creation flags
qapi: Make parameter 'file' optional for BlockdevCreateOptionsLUKS
crypto: Support LUKS volume with detached header
io: add trace event when cancelling TLS handshake
chardev: close QIOChannel before unref'ing
docs: re-generate x86_64 ABI compatibility CSV
docs: fix highlighting of CPU ABI header rows
scripts: drop comment about autogenerated CPU API file
softmmu: remove obsolete comment about libvirt timeouts
ui: drop VNC feature _MASK constants
qemu_init: increase NOFILE soft limit on POSIX
crypto: Introduce SM4 symmetric cipher algorithm
meson: sort C warning flags alphabetically
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use of String is problematic, because it results in awkward interface
documentation. The previous commit cleaned up one instance.
Move String out of common.json next to its remaining users in net.json
to discourage reuse elsewhere.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240205074709.3613229-15-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
SocketAddress branch @fd is documented in enum SocketAddressType,
unlike the other branches. That's because the branch's type is String
from common.json.
Use a local copy of String, so we can put the documentation in the
usual place.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240205074709.3613229-14-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Linux writes zeroes at bootup into the default ports for LASI audio and
LASI floppy controller to reset those devices. Allow writing to those
registers to avoid HPMCs.
Signed-off-by: Helge Deller <deller@gmx.de>
The Astro/Elroy chip can work in either Hard-Fail or Soft-Fail mode.
Hard fail means the system bus will send an HPMC (=crash) to the
processor, soft fail means the system bus will ignore timeouts of
MMIO-reads or MMIO-writes and return -1ULL.
The HF mode is controlled by a bit in the status register and is usually
programmed by the OS. Return the corresponing values based on the current
value of that bit.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The upcoming syscall catchpoint support needs to get control on syscall
entry and return. Provide the necessary hooks for that, which are
no-ops for now.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240202152506.279476-4-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240207163812.3231697-13-alex.bennee@linaro.org>
The upcoming syscall catchpoint support needs to send stop packets with
an associated reason to GDB. Add an extra parameter to gdb_handlesig()
for that, and rename it to gdb_handlesig_reason(). Provide a
compatibility wrapper with an old name.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240202152506.279476-3-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240207163812.3231697-12-alex.bennee@linaro.org>
This regressed qemu-system-xtensa:
TEST test_load_store on xtensa
qemu-system-xtensa: Some ROM regions are overlapping
These ROM regions might have been loaded by direct user request or by default.
They could be BIOS/firmware images, a guest kernel, initrd or some other file loaded into guest memory.
Check whether you intended to load all this guest code, and whether it has been built to load to the correct addresses.
The following two regions overlap (in the memory address space):
test_load_store ELF program header segment 1 (addresses 0x0000000000001000 - 0x0000000000001f26)
test_load_store ELF program header segment 2 (addresses 0x0000000000001ab8 - 0x0000000000001ab8)
make[1]: *** [Makefile:187: run-test_load_store] Error 1
This reverts commit 62570f1434.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240207163812.3231697-5-alex.bennee@linaro.org>
* Check for 'A' extension on all atomic instructions
* Add support for 'B' extension
* Internally deprecate riscv_cpu_options
* Implement optional CSR mcontext of debug Sdtrig extension
* Internally add cpu->cfg.vlenb and remove cpu->cfg.vlen
* Support vlenb and vregs[] in KVM
* RISC-V gdbstub and TCG plugin improvements
* Remove vxrm and vxsat from FCSR
* Use RISCVException as return type for all csr ops
* Use g_autofree more and fix a memory leak
* Add support for Zaamo and Zalrsc
* Support new isa extension detection devicetree properties
* SMBIOS support for RISC-V virt machine
* Enable xtheadsync under user mode
* Add rv32i,rv32e and rv64e CPUs
-----BEGIN PGP SIGNATURE-----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=yuRM
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20240209' of https://github.com/alistair23/qemu into staging
RISC-V PR for 9.0
* Check for 'A' extension on all atomic instructions
* Add support for 'B' extension
* Internally deprecate riscv_cpu_options
* Implement optional CSR mcontext of debug Sdtrig extension
* Internally add cpu->cfg.vlenb and remove cpu->cfg.vlen
* Support vlenb and vregs[] in KVM
* RISC-V gdbstub and TCG plugin improvements
* Remove vxrm and vxsat from FCSR
* Use RISCVException as return type for all csr ops
* Use g_autofree more and fix a memory leak
* Add support for Zaamo and Zalrsc
* Support new isa extension detection devicetree properties
* SMBIOS support for RISC-V virt machine
* Enable xtheadsync under user mode
* Add rv32i,rv32e and rv64e CPUs
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmXGBRAACgkQr3yVEwxT
# gBPqVA//etMiwP8+lQb2E4pw+QwBIzpm3qFyBlqgSCFrekj1u2kYNd4CH3CKurWE
# ysoQ6OAMeb0MUbRHdjrejjzD/wOg7JNA9h7ynM1VbupveBrJY3GWC6qQWSG+A1j/
# LSgmr/dDya74chDxjxa+7ld3xqloHi5OtdGaeORfdPXl7mjCCKKCoSKYCex1ykup
# uuB7bsjeWeWEbuUsntmeuHJLZJuhpnbuZJmp17tEo+3vWXqjxV00Lik+XMwh3gua
# KOLiAqHjGr2NEhA3Mg1JLcQ+6JLTDM9ugZpQeNGQwMkfuB/RAU7jO/1Di3flbadF
# 8l2xOHu3mydDbfdxTGZNJjcIrMTX/YEewAYZLRYpNsyPOMntgq8HEegwCdWGvK7C
# M5Tc59MNSuBt+zkZkHd21qLYusa2ThP4YT/schh7IA+2F1TSKdhlptEzi2oebIc7
# ilLSgZ9Of72QlAH2OPJNSAL9Nbc06MHEM0JiHIJa5u+XdcVRhZus5h1YIOKXisqF
# YPP22RnI5Jj5d5csa/0ONAZGFh5SRMTJtpjKoKSkzoYJWDjCQ2MiUAOmLscchMZd
# wbK0vjeRf6kRG4U4z7nTmHS9kzH8RXUZDecVcOITuMpKih9LhUiCZ+xPunFYPycJ
# WNFa9/pENcCXJweXvtk4NHwx933rX56678lF6KY2hwUwwaiBOv4=
# =yuRM
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 09 Feb 2024 10:57:20 GMT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20240209' of https://github.com/alistair23/qemu: (61 commits)
target/riscv: add rv32i, rv32e and rv64e CPUs
target/riscv/cpu.c: add riscv_bare_cpu_init()
target/riscv: Enable xtheadsync under user mode
qemu-options: enable -smbios option on RISC-V
target/riscv: SMBIOS support for RISC-V virt machine
smbios: function to set default processor family
smbios: add processor-family option
target/riscv: support new isa extension detection devicetree properties
target/riscv: use misa_mxl_max to populate isa string rather than TARGET_LONG_BITS
target/riscv: Expose Zaamo and Zalrsc extensions
target/riscv: Check 'A' and split extensions for atomic instructions
target/riscv: Add Zaamo and Zalrsc extension infrastructure
hw/riscv/virt.c: use g_autofree in create_fdt_*
hw/riscv/virt.c: use g_autofree in virt_machine_init()
hw/riscv/virt.c: use g_autofree in create_fdt_virtio()
hw/riscv/virt.c: use g_autofree in create_fdt_sockets()
hw/riscv/virt.c: use g_autofree in create_fdt_socket_cpus()
hw/riscv/numa.c: use g_autofree in socket_fdt_write_distance_matrix()
hw/riscv/virt-acpi-build.c: fix leak in build_rhct()
target/riscv: Use RISCVException as return type for all csr ops
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Expand the signature of qcrypto_block_create to enable the
formation of LUKS volumes with detachable headers. To accomplish
that, introduce QCryptoBlockCreateFlags to instruct the creation
process to set the payload_offset_sector to 0.
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
By enhancing the LUKS driver, it is possible to implement
the LUKS volume with a detached header.
Normally a LUKS volume has a layout:
disk: | header | key material | disk payload data |
With a detached LUKS header, you need 2 disks so getting:
disk1: | header | key material |
disk2: | disk payload data |
There are a variety of benefits to doing this:
* Secrecy - the disk2 cannot be identified as containing LUKS
volume since there's no header
* Control - if access to the disk1 is restricted, then even
if someone has access to disk2 they can't unlock
it. Might be useful if you have disks on NFS but
want to restrict which host can launch a VM
instance from it, by dynamically providing access
to the header to a designated host
* Flexibility - your application data volume may be a given
size and it is inconvenient to resize it to
add encryption.You can store the LUKS header
separately and use the existing storage
volume for payload
* Recovery - corruption of a bit in the header may make the
entire payload inaccessible. It might be
convenient to take backups of the header. If
your primary disk header becomes corrupt, you
can unlock the data still by pointing to the
backup detached header
Take the raw-format image as an example to introduce the usage
of the LUKS volume with a detached header:
1. prepare detached LUKS header images
$ dd if=/dev/zero of=test-header.img bs=1M count=32
$ dd if=/dev/zero of=test-payload.img bs=1M count=1000
$ cryptsetup luksFormat --header test-header.img test-payload.img
> --force-password --type luks1
2. block-add a protocol blockdev node of payload image
$ virsh qemu-monitor-command vm '{"execute":"blockdev-add",
> "arguments":{"node-name":"libvirt-1-storage", "driver":"file",
> "filename":"test-payload.img"}}'
3. block-add a protocol blockdev node of LUKS header as above.
$ virsh qemu-monitor-command vm '{"execute":"blockdev-add",
> "arguments":{"node-name":"libvirt-2-storage", "driver":"file",
> "filename": "test-header.img" }}'
4. object-add the secret for decrypting the cipher stored in
LUKS header above
$ virsh qemu-monitor-command vm '{"execute":"object-add",
> "arguments":{"qom-type":"secret", "id":
> "libvirt-2-storage-secret0", "data":"abc123"}}'
5. block-add the raw-drived blockdev format node
$ virsh qemu-monitor-command vm '{"execute":"blockdev-add",
> "arguments":{"node-name":"libvirt-1-format", "driver":"raw",
> "file":"libvirt-1-storage"}}'
6. block-add the luks-drived blockdev to link the raw disk
with the LUKS header by specifying the field "header"
$ virsh qemu-monitor-command vm '{"execute":"blockdev-add",
> "arguments":{"node-name":"libvirt-2-format", "driver":"luks",
> "file":"libvirt-1-format", "header":"libvirt-2-storage",
> "key-secret":"libvirt-2-format-secret0"}}'
7. hot-plug the virtio-blk device finally
$ virsh qemu-monitor-command vm '{"execute":"device_add",
> "arguments": {"num-queues":"1", "driver":"virtio-blk-pci",
> "drive": "libvirt-2-format", "id":"virtio-disk2"}}'
Starting a VM with a LUKS volume with detached header is
somewhat similar to hot-plug in that both maintaining the
same json command while the starting VM changes the
"blockdev-add/device_add" parameters to "blockdev/device".
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In many configurations, e.g. multiple vNICs with multiple queues or
with many Ceph OSDs, the default soft limit of 1024 is not enough.
QEMU is supposed to work fine with file descriptors >= 1024 and does
not use select() on POSIX. Bump the soft limit to the allowed hard
limit to avoid issues with the aforementioned configurations.
Of course the limit could be raised from the outside, but the man page
of systemd.exec states about 'LimitNOFILE=':
> Don't use.
> [...]
> Typically applications should increase their soft limit to the hard
> limit on their own, if they are OK with working with file
> descriptors above 1023,
If the soft limit is already the same as the hard limit, avoid the
superfluous setrlimit call. This can avoid a warning with a strict
seccomp filter blocking setrlimit if NOFILE was already raised before
executing QEMU.
Buglink: https://bugzilla.proxmox.com/show_bug.cgi?id=4507
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
- William's fix on hwpoison migration which used to crash QEMU
- Peter's multifd cleanup + bugfix + optimizations
- Avihai's fix on multifd crash over non-socket channels
- Fabiano's multifd thread-race fix
- Peter's CI fix series
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZcREtRIccGV0ZXJ4QHJl
ZGhhdC5jb20ACgkQO1/MzfOr1wacrwEAl2aeQkh51h/e+OKX7MG4/4Y6Edf6Oz7o
IJLk/cyrUFQA/2exo2lOdv5zHNOJKwAYj8HYDraezrC/MK1eED4Wji0M
=k53l
-----END PGP SIGNATURE-----
Merge tag 'migration-staging-pull-request' of https://gitlab.com/peterx/qemu into staging
Migration pull
- William's fix on hwpoison migration which used to crash QEMU
- Peter's multifd cleanup + bugfix + optimizations
- Avihai's fix on multifd crash over non-socket channels
- Fabiano's multifd thread-race fix
- Peter's CI fix series
# -----BEGIN PGP SIGNATURE-----
#
# iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZcREtRIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1wacrwEAl2aeQkh51h/e+OKX7MG4/4Y6Edf6Oz7o
# IJLk/cyrUFQA/2exo2lOdv5zHNOJKwAYj8HYDraezrC/MK1eED4Wji0M
# =k53l
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 08 Feb 2024 03:04:21 GMT
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [marginal]
# gpg: aka "Peter Xu <peterx@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'migration-staging-pull-request' of https://gitlab.com/peterx/qemu: (34 commits)
ci: Update comment for migration-compat-aarch64
ci: Remove tag dependency for build-previous-qemu
tests/migration-test: Stick with gicv3 in aarch64 test
migration/multifd: Add a synchronization point for channel creation
migration/multifd: Unify multifd and TLS connection paths
migration/multifd: Move multifd_send_setup into migration thread
migration/multifd: Move multifd_send_setup error handling in to the function
migration/multifd: Remove p->running
migration/multifd: Join the TLS thread
migration: Fix logic of channels and transport compatibility check
migration/multifd: Optimize sender side to be lockless
migration/multifd: Fix MultiFDSendParams.packet_num race
migration/multifd: Stick with send/recv on function names
migration/multifd: Cleanup multifd_load_cleanup()
migration/multifd: Cleanup multifd_save_cleanup()
migration/multifd: Rewrite multifd_queue_page()
migration/multifd: Change retval of multifd_send_pages()
migration/multifd: Change retval of multifd_queue_page()
migration/multifd: Split multifd_send_terminate_threads()
migration/multifd: Forbid spurious wakeups
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Provide a function to set the default processor family.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20240123184229.10415-3-heinrich.schuchardt@canonical.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
target/alpha: Use TCG_COND_TST{EQ,NE}
target/m68k: Use TCG_COND_TST{EQ,NE} in gen_fcc_cond
target/sparc: Use TCG_COND_TSTEQ in gen_op_mulscc
target/s390x: Use TCG_COND_TSTNE for CC_OP_{TM,ICM}
target/s390x: Improve general case of disas_jcc
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmXBpTAdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/p6gf9HAasTSRECk2cvjW9
/mcJy0AIaespnI50fG8fm48OoFl0847CdrsJycpZ1spw3W3Wb0cVbMbq/teNMjXZ
0SGQJFk9Baq7wMhW7VzhSzJ96pcorpQprp7XBMdheLXqpT4zsM/EuwEAepBk8RUG
3kCeo38dswXE681ZafZkd/8pPzII19sQK8eiMpceeYkBsbbep+DDcnE18Ee4kISS
u0SbuslKVahxd86LKuzrcz0pNFcmFuR5jRP9hmbQ0MfeAn0Pxlndi+ayZNghfgPf
3hDjskiionFwxb/OoRj45BssTWfDiluWl7IUsHfegPXCQ2Y+woT5Vq6TVGZn0GqS
c6RLQQ==
=TMiE
-----END PGP SIGNATURE-----
Merge tag 'pull-tcg-20240205-2' of https://gitlab.com/rth7680/qemu into staging
tcg: Introduce TCG_COND_TST{EQ,NE}
target/alpha: Use TCG_COND_TST{EQ,NE}
target/m68k: Use TCG_COND_TST{EQ,NE} in gen_fcc_cond
target/sparc: Use TCG_COND_TSTEQ in gen_op_mulscc
target/s390x: Use TCG_COND_TSTNE for CC_OP_{TM,ICM}
target/s390x: Improve general case of disas_jcc
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmXBpTAdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/p6gf9HAasTSRECk2cvjW9
# /mcJy0AIaespnI50fG8fm48OoFl0847CdrsJycpZ1spw3W3Wb0cVbMbq/teNMjXZ
# 0SGQJFk9Baq7wMhW7VzhSzJ96pcorpQprp7XBMdheLXqpT4zsM/EuwEAepBk8RUG
# 3kCeo38dswXE681ZafZkd/8pPzII19sQK8eiMpceeYkBsbbep+DDcnE18Ee4kISS
# u0SbuslKVahxd86LKuzrcz0pNFcmFuR5jRP9hmbQ0MfeAn0Pxlndi+ayZNghfgPf
# 3hDjskiionFwxb/OoRj45BssTWfDiluWl7IUsHfegPXCQ2Y+woT5Vq6TVGZn0GqS
# c6RLQQ==
# =TMiE
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 06 Feb 2024 03:19:12 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* tag 'pull-tcg-20240205-2' of https://gitlab.com/rth7680/qemu: (39 commits)
tcg/tci: Support TCG_COND_TST{EQ,NE}
tcg/s390x: Support TCG_COND_TST{EQ,NE}
tcg/s390x: Add TCG_CT_CONST_CMP
tcg/s390x: Split constraint A into J+U
tcg/ppc: Support TCG_COND_TST{EQ,NE}
tcg/ppc: Add TCG_CT_CONST_CMP
tcg/ppc: Tidy up tcg_target_const_match
tcg/ppc: Use cr0 in tcg_to_bc and tcg_to_isel
tcg/ppc: Sink tcg_to_bc usage into tcg_out_bc
tcg/sparc64: Support TCG_COND_TST{EQ,NE}
tcg/sparc64: Pass TCGCond to tcg_out_cmp
tcg/sparc64: Hoist read of tcg_cond_to_rcond
tcg/i386: Use TEST r,r to test 8/16/32 bits
tcg/i386: Improve TSTNE/TESTEQ vs powers of two
tcg/i386: Support TCG_COND_TST{EQ,NE}
tcg/i386: Move tcg_cond_to_jcc[] into tcg_out_cmp
tcg/i386: Pass x86 condition codes to tcg_out_cmov
tcg/arm: Support TCG_COND_TST{EQ,NE}
tcg/arm: Split out tcg_out_cmp()
tcg/aarch64: Generate CBNZ for TSTNE of UINT32_MAX
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
During drain, we do not care about virtqueue notifications, which is why
we remove the handlers on it. When removing those handlers, whether vq
notifications are enabled or not depends on whether we were in polling
mode or not; if not, they are enabled (by default); if so, they have
been disabled by the io_poll_start callback.
Because we do not care about those notifications after removing the
handlers, this is fine. However, we have to explicitly ensure they are
enabled when re-attaching the handlers, so we will resume receiving
notifications. We do this in virtio_queue_aio_attach_host_notifier*().
If such a function is called while we are in a polling section,
attaching the notifiers will then invoke the io_poll_start callback,
re-disabling notifications.
Because we will always miss virtqueue updates in the drained section, we
also need to poll the virtqueue once after attaching the notifiers.
Buglink: https://issues.redhat.com/browse/RHEL-3934
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-ID: <20240202153158.788922-3-hreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
usb-storage is for the most part just a wrapper around an internally
created scsi-disk device. It uses DEFINE_BLOCK_PROPERTIES() to offer all
of the usual block device properties to the user, but then only forwards
a few select properties to the internal device while the rest is
silently ignored.
This changes scsi_bus_legacy_add_drive() to accept a whole BlockConf
instead of some individual values inside of it so that usb-storage can
now pass the whole configuration to the internal scsi-disk. This enables
the remaining block device properties, e.g. logical/physical_block_size
or discard_granularity.
Buglink: https://issues.redhat.com/browse/RHEL-22375
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240131130607.24117-1-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The VirtIOBlock::rq field has had the type void * since its introduction
in commit 869a5c6df1 ("Stop VM on error in virtio-blk. (Gleb
Natapov)").
Perhaps this was done to avoid the forward declaration of
VirtIOBlockReq.
Hanna Czenczek <hreitz@redhat.com> pointed out the missing type. Specify
the actual type because there is no need to use void * here.
Suggested-by: Hanna Czenczek <hreitz@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240206190610.107963-5-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QEMU initializes preallocated backend memory as the objects are parsed from
the command line. This is not optimal in some cases (e.g. memory spanning
multiple NUMA nodes) because the memory objects are initialized in series.
Allow the initialization to occur in parallel (asynchronously). In order to
ensure optimal thread placement, asynchronous initialization requires prealloc
context threads to be in use.
Signed-off-by: Mark Kanda <mark.kanda@oracle.com>
Message-ID: <20240131165327.3154970-2-mark.kanda@oracle.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
A memory page poisoned from the hypervisor level is no longer readable.
The migration of a VM will crash Qemu when it tries to read the
memory address space and stumbles on the poisoned page with a similar
stack trace:
Program terminated with signal SIGBUS, Bus error.
#0 _mm256_loadu_si256
#1 buffer_zero_avx2
#2 select_accel_fn
#3 buffer_is_zero
#4 save_zero_page
#5 ram_save_target_page_legacy
#6 ram_save_host_page
#7 ram_find_and_save_block
#8 ram_save_iterate
#9 qemu_savevm_state_iterate
#10 migration_iteration_run
#11 migration_thread
#12 qemu_thread_start
To avoid this VM crash during the migration, prevent the migration
when a known hardware poison exists on the VM.
Signed-off-by: William Roche <william.roche@oracle.com>
Link: https://lore.kernel.org/r/20240130190640.139364-2-william.roche@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Add the enumerators, adjust the helpers to match, and dump.
Not supported anywhere else just yet.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For user-only mode, use MMU_USER_IDX.
For system mode, use CPUClass.mmu_index.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
To be used after all targets have populated the hook.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Also remove the stale declaration of host_net_devices; the actual
definition was removed long ago in commit 7cc28cb061 ("net: Remove
the deprecated 'host_net_add' and 'host_net_remove' HMP commands")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
These old functions can be removed now too. Let net_param_nic() print
the full set of network devices directly, and also make it note that a
list more specific to this platform/config will be available by using
'-nic model=help' instead.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
This function is no longer used, as all its callers have been converted
to use pci_init_nic_devices() instead.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
There are no callers of this function any more, as they have all been
converted to qemu_{create,configure}_nic_device().
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Create the device only if there is a corresponding NIC config for it.
Remove the explicit check on nd_table[0].used from hw/hppa/machine.c
which (since commit d8a3220005) tries to do the same thing.
The lasi_82596 support has been disabled since it was first introduced,
since enable_lasi_lan() has always been zero. This allows the user to
enable it by explicitly requesting a NIC model 'lasi_82596' or just
using the alias 'lasi'. Otherwise, it defaults to a PCI NIC as before.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Some callers instantiate the device unconditionally, others will do so only
if there is a NICInfo to go with it. This appears to be fairly random, but
preseve the existing behaviour for now.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Some callers instantiate the device unconditionally, others will do so only
if there is a NICInfo to go with it. This appears to be fairly random, but
preserve the existing behaviour of each caller for now.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
When instantiating XenBus itself, for each NIC which is configured with
either the model unspecified, or set to to "xen" or "xen-net-device",
create a corresponding xen-net-device for it.
Now we can revert the previous more hackish version which relied on the
platform code explicitly registering the NICs on its own XenBus, having
returned the BusState* from xen_bus_init() itself.
This also fixes the setup for Xen PV guests, which was previously broken
in various ways and never actually managed to peer with the netdev.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Eliminate direct access to nd_table[] and nb_nics by processing the the
Xen and ISA NICs first and then calling pci_init_nic_devices() for the
rest.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The loop over nd_table[] to add PCI NICs is repeated in quite a few
places. Add a helper function to do it.
Some platforms also try to instantiate a specific model in a specific
slot, to match the real hardware. Add pci_init_nic_in_slot() for that
purpose.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This will instantiate any NICs which live on a given bus type. Each bus
is allowed *one* substitution (for PCI it's virtio → virtio-net-pci, for
Xen it's xen → xen-net-device; no point in overengineering it unless we
actually want more).
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
