Commit Graph

76 Commits

Author SHA1 Message Date
Jean-Christophe DUBOIS
ec46eaa83a i.MX: Add i.MX6 SOC implementation.
For now we only support the following devices:
* up to 4 Cortex A9 cores
* A9 MPCORE (SCU, GIC, TWD)
* 5 i.MX UARTs
* 2 EPIT timers
* 1 GPT timer
* 3 I2C controllers
* 7 GPIO controllers
* 6 SDHC controllers
* 5 SPI controllers
* 1 CCM device
* 1 SRC device
* various ROM/RAM areas.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-12 13:22:29 +01:00
Grégory ESTRADE
6717f587a4 bcm2835_dma: add emulation of Raspberry Pi DMA controller
At present, all DMA transfers complete inline (so a looping descriptor
queue will lock up the device). We also do not model pause/abort,
arbitrarion/priority, or debug features.

Signed-off-by: Grégory ESTRADE <gregory.estrade@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 1457467526-8840-6-git-send-email-Andrew.Baumann@microsoft.com
[AB: implement 2D mode, cleanup/refactoring for upstream submission]
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16 17:42:18 +00:00
Grégory ESTRADE
5e9c2a8dac bcm2835_fb: add framebuffer device for Raspberry Pi
The framebuffer occupies the upper portion of memory (64MiB by
default), but it can only be controlled/configured via a system
mailbox or property channel (to be added by a subsequent patch).

Signed-off-by: Grégory ESTRADE <gregory.estrade@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 1457467526-8840-4-git-send-email-Andrew.Baumann@microsoft.com
[AB: added Windows (BGR) support and cleanup/refactoring for upstream submission]
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16 17:42:18 +00:00
Andrew Baumann
97398d900c bcm2835_aux: add emulation of BCM2835 AUX (aka UART1) block
At present only the core UART functions (data path for tx/rx) are
implemented, which is enough for UEFI to boot. The following
features/registers are unimplemented:
  * Line/modem control
  * Scratch register
  * Extra control
  * Baudrate
  * SPI interfaces

Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1457467526-8840-3-git-send-email-Andrew.Baumann@microsoft.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16 17:42:18 +00:00
Andrew Jeffery
43e3346e43 hw/arm: Add ASPEED AST2400 SoC model
While the ASPEED AST2400 SoC[1] has a broad range of capabilities this
implementation is minimal, comprising an ARM926 processor, ASPEED VIC
and timer devices, and a 8250 UART.

[1] http://www.aspeedtech.com/products.php?fPath=20&rId=376

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1458096317-25223-4-git-send-email-andrew@aj.id.au
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16 17:42:18 +00:00
Peter Crosthwaite
9776f63645 arm: boot: Support big-endian elfs
Support ARM big-endian ELF files in system-mode emulation. When loading
an elf, determine the endianness mode expected by the elf, and set the
relevant CPU state accordingly.

With this, big-endian modes are now fully supported via system-mode LE,
so there is no need to restrict the elf loading to the TARGET
endianness so the ifdeffery on TARGET_WORDS_BIGENDIAN goes away.

Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: fix typo in comments]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-04 11:30:21 +00:00
Peter Maydell
83ec1923cd hw/arm/virt: Provide a secure-only RAM if booting in Secure mode
If we're booting in Secure mode, provide a secure-only RAM
(just 16MB) so that secure firmware has somewhere to run
from that won't be accessible to the Non-secure guest.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1455288361-30117-2-git-send-email-peter.maydell@linaro.org
2016-03-04 11:30:17 +00:00
Andrew Baumann
716536a9b6 arm/boot: move highbank secure board setup code to common routine
The new version is slightly different, to support Rasbperry Pi (in
particular, Pi1's arm11 core which doesn't support v7 instructions
such as MOVW).

Tested-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-03 15:00:46 +00:00
Andrew Baumann
bad5623690 bcm2836: add bcm2836 SoC device
This is the SoC for Raspberry Pi 2.

Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-03 15:00:46 +00:00
Andrew Baumann
7c62aeb82a bcm2835_peripherals: add rollup device for bcm2835 peripherals
This device maintains all the non-CPU peripherals on bcm2835 (Pi1)
which are also present on bcm2836 (Pi2). It also implements the
private address spaces used for DMA and mailboxes.

Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-03 15:00:45 +00:00
Igor Mammedov
6d152ebaf4 arm: virt-acpi: each MADT.GICC entry as enabled unconditionally
in current impl. condition

build_madt() {
  ...
  if (test_bit(i, cpuinfo->found_cpus))

is always true since loop handles only present CPUs
in range [0..smp_cpus).
But to fill usless cpuinfo->found_cpus we do unnecessary
scan over QOM tree to find the same CPUs.
So mark GICC as present always and drop not needed
code that fills cpuinfo->found_cpus.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1454323689-248759-1-git-send-email-imammedo@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-03 13:46:34 +00:00
Peter Maydell
3df708eb48 hw/arm/virt: add secure memory region and UART
Add a secure memory region to the virt board, which is the
same as the nonsecure memory region except that it also has
a secure-only UART in it. This is only created if the
board is started with the '-machine secure=on' property.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-01-21 14:15:07 +00:00
Alistair Francis
02d07eb494 xlnx-zynqmp: Connect the SPI devices
Connect the Xilinx SPI devices to the ZynqMP model.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
[ PC changes
 * Use QOM alias for bus connectivity on SoC level
]
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
[PMM: free the g_strdup_printf() string when finished with it]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-21 14:15:03 +00:00
Alistair Francis
dc3b89ef87 xlnx-zynqmp: Add support for high DDR memory regions
The Xilinx ZynqMP SoC and EP108 board supports three memory regions:
 - A 2GB region starting at 0
 - A 32GB region starting at 32GB
 - A 256GB region starting at 768GB

This patch adds support for the first two memory regions, which is
automatically created based on the size specified by the QEMU memory
command line argument.

On hardware the physical memory region is one continuous region, it is then
mapped into the three different regions by the DDRC. As we don't model the
DDRC this is done at startup by QEMU. The board creates the memory region and
then passes that memory region to the SoC. The SoC then maps the memory
regions.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: a1e47db941d65733724a300fcd98b74fbeeaaf22.1452637205.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-15 14:34:54 +00:00
Jean-Christophe Dubois
92eccc6e13 i.MX: Add an i.MX25 specific CCM class/instance
With this CCM, i.MX25 timer is accurate with "real world time".

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 2c0cf90be767bfc8520661eca891ab22c61f18fe.1449528242.git.jcd@tribudubois.net
Reviewed-by Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:16 +00:00
Jean-Christophe Dubois
cb54d868c6 i.MX: Split the CCM class into an abstract base class and a concrete class
The IMX_CCM class is now the base abstract class that is used by EPIT
and GPT timer implementation.

IMX31_CCM class is the concrete class implementing CCM for i.MX31 SOC.

For now the i.MX25 continues to use the i.MX31 CCM implementation.

An i.MX25 specific CCM will be introduced in a later patch.

We also rework initialization to stop using deprecated sysbus device init.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: fd3c7f87b50f5ebc99ec91f01413db35017f116d.1449528242.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:15 +00:00
Shannon Zhao
b0a3721e44 ARM: Virt: Add a GPIO controller
ACPI 5.0 supports GPIO-signaled ACPI Events. This can be used for
powerdown, hotplug evnets. Add a GPIO controller in machine virt,
to support powerdown, maybe can be used for cpu hotplug. And
here we use pl061.

Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Wei Huang <wei@redhat.com>
Tested-by: Wei Huang <wei@redhat.com>
Message-id: 1449804086-3464-4-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:13 +00:00
Peter Crosthwaite
baf6b6815b arm: boot: Add secure_board_setup flag
Add a flag that when set, will cause the primary CPU to start in secure
mode, even if the overall boot is non-secure. This is useful for when
there is a board-setup blob that needs to run from secure mode, but
device and secondary CPU init should still be done as-normal for a non-
secure boot.

Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: d1170774d5446d715fced7739edfc61a5be931f9.1447007690.git.crosthwaite.peter@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-10 13:37:33 +00:00
Peter Crosthwaite
dca625768a arm: allwinner-a10: Add SATA
Add the Allwinner A10 AHCI controller module to the SoC.

Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 69d6962f2d14a218bd07e9ac4ccd1947737cc30f.1445917756.git.crosthwaite.peter@gmail.com
Signed-off-by: John Snow <jsnow@redhat.com>
2015-11-06 14:09:01 -05:00
Michael Davidsaver
20c59c3892 armv7-m: Return DeviceState* from armv7m_init()
Change armv7m_init to return the DeviceState* for the NVIC.
This allows access to all GPIO blocks, not just the IRQ inputs.
Move qdev_get_gpio_in() calls out of armv7m_init() into
board code for stellaris and stm32f205 boards.

Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-03 13:49:41 +00:00
Peter Crosthwaite
10b8ec73e6 arm: boot: Add board specific setup code API
Add an API for boards to inject their own preboot software (or
firmware) sequence.

The software then returns to the bootloader via the link register. This
allows boards to do their own little bits of firmware setup without
needed to replace the bootloader completely (which is the requirement
for existing firmware support).

The blob is loaded by a callback if and only if doing a linux boot
(similar to the existing write_secondary support).

Rewrite the comment for the primary boot blob.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 070295644c6ac84696d743913296e8cfefb48c15.1446182614.git.crosthwaite.peter@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-03 13:49:41 +00:00
Sai Pavan Boddu
33108e9f33 target-arm: xlnx-zynqmp: Add sdhci support.
Add two SYSBUS_SDHCI devices for xlnx-zynqmp

Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-10-29 17:59:27 +00:00
Pavel Fedin
b92ad3949b hw/arm/virt: Add gic-version option to virt machine
Add gic_version to VirtMachineState, set it to value of the option
and pass it around where necessary. Instantiate devices and fdt
nodes according to the choice.

max_cpus for virt machine increased to 123 (calculated from redistributor
space available in the memory map). GICv2 compatibility check happens
inside arm_gic_common_realize().

ITS region is added to the memory map too, however currently it not used,
just reserved.

Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Tested-by: Ashok kumar <ashoks@broadcom.com>
[PMM: Added missing cpu_to_le* calls, thanks to Shannon Zhao]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-24 01:29:37 +01:00
Jean-Christophe Dubois
6abc7158cb i.MX: Add GPIO devices to i.MX25 SOC
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 2eb129ba8713aedfe877eaa3d8de80061d880fbb.1441828793.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-14 14:39:49 +01:00
Jean-Christophe Dubois
dde0c4ca6b i.MX: Add GPIO devices to i.MX31 SOC
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 60b67c9a8b948159f4b4163ead86fbf701c011c6.1441828793.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-14 14:39:49 +01:00
Nathan Rossi
52c16b458a arm: xlnx-zynqmp: Fix up GIC region size
The GIC in ZynqMP cover a 64K address space, however the actual
registers are decoded within a 4K address space and mirrored at the 4K
boundaries. This change fixes the defined size for these regions as it
was set to 0x4000/16K incorrectly.

Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1441719672-25296-1-git-send-email-nathan@nathanrossi.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-14 14:39:47 +01:00
Alistair Francis
6fdf3282d1 xlnx-zynqmp: Connect the sysbus AHCI to ZynqMP
Connect the Sysbus AHCI device to ZynqMP.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Sai Pavan Boddu <saipava@xilinx.com>
[PMM: removed unnecessary brackets in error_propagate call]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-08 17:38:45 +01:00
Peter Maydell
d8b1ae4237 hw/arm: new interface for devices which need to behave differently for kernel boot
For ARM we have a little minimalist bootloader in hw/arm/boot.c which
takes the place of firmware if we're directly booting a Linux kernel.
Unfortunately a few devices need special case handling in this situation
to do the initialization which on real hardware would be done by
firmware. (In particular if we're booting a kernel in NonSecure state
then we need to make a TZ-aware GIC put all its interrupts into Group 1,
or the guest will be unable to use them.)

Create a new QOM interface which can be implemented by devices which
need to do something different from their default reset behaviour.
The callback will be called after machine initialization and before
first reset.

Suggested-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1441383782-24378-3-git-send-email-peter.maydell@linaro.org
2015-09-08 17:38:43 +01:00
Jean-Christophe Dubois
d4e26d106a i.MX: Add i2C devices to i.MX31 SOC
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: fb20e6bf5cf946c4530b2cfb55c7e37f5a0fc051.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07 10:39:31 +01:00
Jean-Christophe Dubois
7f3986278b i.MX: Add qtest support for I2C device emulator.
This is using a ds1338 RTC chip on the I2C bus. This RTC chip is
not present on the real 3DS PDK board.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Acked-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 05601683a2a95c881cbc9f22651a044d969bd0ae.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07 10:39:31 +01:00
Jean-Christophe Dubois
ee708c999d i.MX: Add SOC support for i.MX25
For now we support the following devices:
      * CPU: ARM926
      * Interrupt Controller: AVIC
      * CCM
      * UART x 5
      * EPIT x 2
      * GPT x 4
      * FEC
      * I2C x 3

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 62218bfa90f9101f79098e768c3d58bd92dcb7f3.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07 10:39:30 +01:00
Jean-Christophe Dubois
f044ac4980 i.MX: KZM: use standalone i.MX31 SOC support
Convert the KZM board to use the i.MX31 SoC defintition instead of
redefining the entire SoC on the machine level. Major rewrite of the
machine init code.

While touching the memory map comment de-indent to the correct level
of indentation.

This obsoletes the legacy i.MX device device creation helpers which are removed.

Tested by booting a minimal Linux system on the emulated platform

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 5e783561f092e1c939562fdff001f1ab1194b07f.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07 10:39:30 +01:00
Jean-Christophe Dubois
558df83db7 i.MX: Add SOC support for i.MX31
For now we support the following devices:
  * CPU: ARM1136
  * Interrupt Controller: AVIC
  * CCM
  * UART x 2
  * EPIT x 2
  * GPT

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: f146d819594e41568daec42a1d0f440cdfe3df76.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07 10:39:30 +01:00
Pavel Fedin
5125f9cd25 hw/arm/virt: Add high MMIO PCI region, 512G in size
This large region is necessary for some devices like ivshmem and video cards
32-bit kernels can be built without LPAE support. In this case such a kernel
will not be able to use PCI controller which has windows in high addresses.
In order to work around the problem, "highmem" option is introduced. It
defaults to on on, but can be manually set to off in order to be able to run
those old 32-bit guests.

Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
[PMM: Added missing ULL suffixes and a comment to the a15memmap[] entry]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07 10:39:29 +01:00
Alistair Francis
6675d71915 xlnx-zynqmp: Connect the four OCM banks
The Xilinx EP108 has four separate OCM banks which are located
adjacent to each other. This patch adds the four banks to
the ZynqMP SoC.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: afa6ba31163a5d541a0bef4b0dc11f2597e0c495.1436813543.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-25 15:45:06 +01:00
Jean-Christophe Dubois
282e74c83f i.MX: Split CCM emulator in a header file and a source file
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: b1d6f990229b2608bbaba24f4ff359571c0b07da.1437080501.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-13 11:26:20 +01:00
Peter Maydell
fba0a593b2 Stop including qemu-common.h in memory.h
Including qemu-common.h from other header files is generally a bad
idea, because it means it's very easy to end up with a circular
dependency. For instance, if we wanted to include memory.h from
qom/cpu.h we'd end up with this loop:
 memory.h -> qemu-common.h -> cpu.h -> cpu-qom.h -> qom/cpu.h -> memory.h

Remove the include from memory.h. This requires us to fix up a few
other files which were inadvertently getting declarations indirectly
through memory.h.

The biggest change is splitting the fprintf_function typedef out
into its own header so other headers can get at it without having
to include qemu-common.h.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1435933104-15216-1-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-06 14:59:09 +02:00
Peter Crosthwaite
b58850e79d arm: xlnx-zynqmp: Add 2xCortexR5 CPUs
Add the 2xCortexR5 CPUs to zynqmp board. They are powered off on reset
(this is true of real hardware) by default or selectable as the boot
processor.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: da34128c73ca13fc4f8c3293e1a33d1e1e345655.1434501320.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-19 14:17:45 +01:00
Peter Crosthwaite
6396a193d3 arm: xlnx-zynqmp: Add boot-cpu property
Add a string property that specifies the primary boot cpu. All CPUs
except the one selected will start-powered-off. This allows for elf
boots on any CPU, which prepares support for booting R5 elfs directly
on the R5 processors.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 53331c00d80c7ce9c6a83712348773f1b38fae2b.1434501320.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-19 14:17:45 +01:00
Peter Crosthwaite
2e5577bc55 arm: xlnx-zynqmp: Preface CPU variables with "apu"
The CPUs currently supported by zynqmp are the APU (application
processing unit) CPUs. There are other CPUs in Zynqmp so unqualified
"cpus" in ambiguous. Preface the variables with "APU" accordingly, to
prepare support adding the RPU (realtime processing unit) processors.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: ce32287fc365aea898465e981da3546a227e0811.1434501320.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-19 14:17:45 +01:00
Eric Auger
decf4f807b hw/arm/sysbus-fdt: enable vfio-calxeda-xgmac dynamic instantiation
This patch allows the instantiation of the vfio-calxeda-xgmac device
from the QEMU command line (-device vfio-calxeda-xgmac,host="<device>").

A specialized device tree node is created for the guest, containing
compat, dma-coherent, reg and interrupts properties.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1434455898-17895-1-git-send-email-eric.auger@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-19 14:17:44 +01:00
Eric Auger
5f7a5a0edc hw/arm/virt: add dynamic sysbus device support
Allows sysbus devices to be instantiated from command line by
using -device option. Machvirt creates a platform bus at init.
The dynamic sysbus devices are attached to this platform bus device.

The platform bus device registers a machine init done notifier
whose role will be to bind the dynamic sysbus devices. Indeed
dynamic sysbus devices are created after machine init.

machvirt also registers a notifier that will build the device
tree nodes for the platform bus and its children dynamic sysbus
devices.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1433244554-12898-4-git-send-email-eric.auger@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02 16:31:18 +01:00
Eric Auger
ac9d32e396 hw/arm/boot: arm_load_kernel implemented as a machine init done notifier
Device tree nodes for the platform bus and its children dynamic sysbus
devices are added in a machine init done notifier. To load the dtb once,
after those latter nodes are built and before ROM freeze, the actual
arm_load_kernel existing code is moved into a notifier notify function,
arm_load_kernel_notify. arm_load_kernel now only registers the
corresponding notifier.

Machine files that do not support platform bus stay unchanged. Machine
files willing to support dynamic sysbus devices must call arm_load_kernel
before sysbus-fdt arm_register_platform_bus_fdt_creator to make sure
dynamic sysbus device nodes are integrated in the dtb.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Shannon Zhao <zhaoshenglong@huawei.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1433244554-12898-3-git-send-email-eric.auger@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02 16:31:17 +01:00
Eric Auger
11d306b9df hw/arm/sysbus-fdt: helpers for platform bus nodes addition
This new C module will be used by ARM machine files to generate
platform bus node and their dynamic sysbus device tree nodes.

Dynamic sysbus device node addition is done in a machine init
done notifier. arm_register_platform_bus_fdt_creator does the
registration of this latter and is supposed to be called by
ARM machine files that support platform bus and their dynamic
sysbus. Addition of dynamic sysbus nodes is done only if the
user did not provide any dtb.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Shannon Zhao <zhaoshenglong@huawei.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1433244554-12898-2-git-send-email-eric.auger@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02 15:44:28 +01:00
Christoffer Dall
bd204e63a7 target-arm: Add the GICv2m to the virt board
Add a GICv2m device to the virt board to enable MSIs on the generic PCI
host controller.  We allocate 64 SPIs in the IRQ space for now (this can
be increased/decreased later) and map the GICv2m right after the GIC in
the memory map.

Reviewed-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1432897270-7780-5-git-send-email-christoffer.dall@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02 14:56:25 +01:00
Shannon Zhao
ee246400c1 hw/arm/virt-acpi-build: Generate GTDT table
ACPI v5.1 defines GTDT for ARM devices as a place to describe timer
related information in the system. The Arch Timer interrupts must
be provided for GTDT.

Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1432522520-8068-11-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-29 11:28:56 +01:00
Shannon Zhao
982d06c561 hw/arm/virt-acpi-build: Generate MADT table
MADT describes GIC enabled ARM platforms. The GICC and GICD
subtables are used to define the GIC regions.

Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1432522520-8068-10-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-29 11:28:56 +01:00
Shannon Zhao
f5d8c8cd79 hw/arm/virt-acpi-build: Basic framework for building ACPI tables on ARM
Introduce a preliminary framework in virt-acpi-build.c with the main
ACPI build functions. It exposes the generated ACPI contents to
guest over fw_cfg.

The required ACPI v5.1 tables for ARM are:
- RSDP: Initial table that points to XSDT
- RSDT: Points to FADT GTDT MADT tables
- FADT: Generic information about the machine
- GTDT: Generic timer description table
- MADT: Multiple APIC description table
- DSDT: Holds all information about system devices/peripherals, pointed by FADT

Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 1432522520-8068-5-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-29 11:28:54 +01:00
Shannon Zhao
6a1f001be3 hw/arm/virt: Record PCIe ranges in MemMapEntry array
To generate ACPI table for PCIe controller, we need the base and size of
the PCIe ranges. Record these ranges in MemMapEntry array, then we could
share and use them for generating ACPI table.

Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1432522520-8068-4-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-29 11:28:54 +01:00
Shannon Zhao
afe0b3803f hw/arm/virt: Move common definitions to virt.h
Move some common definitions to virt.h. These will be used by
generating ACPI tables.

Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1432522520-8068-3-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-29 11:28:54 +01:00