Commit Graph

1626 Commits

Author SHA1 Message Date
Peter Maydell d3392718e1 target/arm: Add v8M support to exception entry code
Add support for v8M and in particular the security extension
to the exception entry code. This requires changes to:
 * calculation of the exception-return magic LR value
 * push the callee-saves registers in certain cases
 * clear registers when taking non-secure exceptions to avoid
   leaking information from the interrupted secure code
 * switch to the correct security state on entry
 * use the vector table for the security state we're targeting

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1506092407-26985-13-git-send-email-peter.maydell@linaro.org
2017-10-06 16:46:49 +01:00
Peter Maydell 907bedb3f3 target/arm: Add support for restoring v8M additional state context
For v8M, exceptions from Secure to Non-Secure state will save
callee-saved registers to the exception frame as well as the
caller-saved registers. Add support for unstacking these
registers in exception exit when necessary.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1506092407-26985-12-git-send-email-peter.maydell@linaro.org
2017-10-06 16:46:48 +01:00
Peter Maydell bfb2eb5278 target/arm: Update excret sanity checks for v8M
In v8M, more bits are defined in the exception-return magic
values; update the code that checks these so we accept
the v8M values when the CPU permits them.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1506092407-26985-11-git-send-email-peter.maydell@linaro.org
2017-10-06 16:46:48 +01:00
Peter Maydell bed079da04 target/arm: Add new-in-v8M SFSR and SFAR
Add the new M profile Secure Fault Status Register
and Secure Fault Address Register.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1506092407-26985-10-git-send-email-peter.maydell@linaro.org
2017-10-06 16:46:48 +01:00
Peter Maydell 4e4259d3c5 target/arm: Don't warn about exception return with PC low bit set for v8M
In the v8M architecture, return from an exception to a PC which
has bit 0 set is not UNPREDICTABLE; it is defined that bit 0
is discarded [R_HRJH]. Restrict our complaint about this to v7M.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1506092407-26985-9-git-send-email-peter.maydell@linaro.org
2017-10-06 16:46:48 +01:00
Peter Maydell cb484f9a6e target/arm: Warn about restoring to unaligned stack
Attempting to do an exception return with an exception frame that
is not 8-aligned is UNPREDICTABLE in v8M; warn about this.
(It is not UNPREDICTABLE in v7M, and our implementation can
handle the merely-4-aligned case fine, so we don't need to
do anything except warn.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1506092407-26985-8-git-send-email-peter.maydell@linaro.org
2017-10-06 16:46:48 +01:00
Peter Maydell 224e0c300a target/arm: Check for xPSR mismatch usage faults earlier for v8M
ARM v8M specifies that the INVPC usage fault for mismatched
xPSR exception field and handler mode bit should be checked
before updating the PSR and SP, so that the fault is taken
with the existing stack frame rather than by pushing a new one.
Perform this check in the right place for v8M.

Since v7M specifies in its pseudocode that this usage fault
check should happen later, we have to retain the original
code for that check rather than being able to merge the two.
(The distinction is architecturally visible but only in
very obscure corner cases like attempting an invalid exception
return with an exception frame in read only memory.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1506092407-26985-7-git-send-email-peter.maydell@linaro.org
2017-10-06 16:46:48 +01:00
Peter Maydell 3f0cddeee1 target/arm: Restore SPSEL to correct CONTROL register on exception return
On exception return for v8M, the SPSEL bit in the EXC_RETURN magic
value should be restored to the SPSEL bit in the CONTROL register
banked specified by the EXC_RETURN.ES bit.

Add write_v7m_control_spsel_for_secstate() which behaves like
write_v7m_control_spsel() but allows the caller to specify which
CONTROL bank to use, reimplement write_v7m_control_spsel() in
terms of it, and use it in exception return.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1506092407-26985-6-git-send-email-peter.maydell@linaro.org
2017-10-06 16:46:48 +01:00
Peter Maydell 3919e60b6e target/arm: Restore security state on exception return
Now that we can handle the CONTROL.SPSEL bit not necessarily being
in sync with the current stack pointer, we can restore the correct
security state on exception return. This happens before we start
to read registers off the stack frame, but after we have taken
possible usage faults for bad exception return magic values and
updated CONTROL.SPSEL.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1506092407-26985-5-git-send-email-peter.maydell@linaro.org
2017-10-06 16:46:47 +01:00
Peter Maydell de2db7ec89 target/arm: Prepare for CONTROL.SPSEL being nonzero in Handler mode
In the v7M architecture, there is an invariant that if the CPU is
in Handler mode then the CONTROL.SPSEL bit cannot be nonzero.
This in turn means that the current stack pointer is always
indicated by CONTROL.SPSEL, even though Handler mode always uses
the Main stack pointer.

In v8M, this invariant is removed, and CONTROL.SPSEL may now
be nonzero in Handler mode (though Handler mode still always
uses the Main stack pointer). In preparation for this change,
change how we handle this bit: rename switch_v7m_sp() to
the now more accurate write_v7m_control_spsel(), and make it
check both the handler mode state and the SPSEL bit.

Note that this implicitly changes the point at which we switch
active SP on exception exit from before we pop the exception
frame to after it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1506092407-26985-4-git-send-email-peter.maydell@linaro.org
2017-10-06 16:46:47 +01:00
Peter Maydell 5b5223997c target/arm: Don't switch to target stack early in v7M exception return
Currently our M profile exception return code switches to the
target stack pointer relatively early in the process, before
it tries to pop the exception frame off the stack. This is
awkward for v8M for two reasons:
 * in v8M the process vs main stack pointer is not selected
   purely by the value of CONTROL.SPSEL, so updating SPSEL
   and relying on that to switch to the right stack pointer
   won't work
 * the stack we should be reading the stack frame from and
   the stack we will eventually switch to might not be the
   same if the guest is doing strange things

Change our exception return code to use a 'frame pointer'
to read the exception frame rather than assuming that we
can switch the live stack pointer this early.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1506092407-26985-3-git-send-email-peter.maydell@linaro.org
2017-10-06 16:46:47 +01:00
Jan Kiszka 77077a8300 arm: Fix SMC reporting to EL2 when QEMU provides PSCI
This properly forwards SMC events to EL2 when PSCI is provided by QEMU
itself and, thus, ARM_FEATURE_EL3 is off.

Found and tested with the Jailhouse hypervisor. Solution based on
suggestions by Peter Maydell.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-id: 4f243068-aaea-776f-d18f-f9e05e7be9cd@siemens.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-10-06 16:46:47 +01:00
Dr. David Alan Gilbert 44b1ff319c migration: pre_save return int
Modify the pre_save method on VMStateDescription to return an int
rather than void so that it potentially can fail.

Changed zillions of devices to make them return 0; the only
case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already
had an error_report/return case.

Note: If you add an error exit in your pre_save you must emit
an error_report to say why.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-09-27 11:35:59 +01:00
Peter Maydell 460b6c8e58 * Speed up AddressSpaceDispatch creation (Alexey)
* Fix kvm.c assert (David)
 * Memory fixes and further speedup (me)
 * Persistent reservation manager infrastructure (me)
 * virtio-serial: add enable_backend callback (Pavel)
 * chardev GMainContext fixes (Peter)
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAlnFX3UUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroMq2wf/Z7i67tTQYhaY7trAehdGDLSa6C4m
 0xAex+DVJrpfxFHLINkktx9NpvyZbQ/PuA0+5W10qmfPVF3hddTgLL3Dcg5xkQOh
 qNa2pFPMTn2T4eEdAANycNEF3nz8at5EnZ5anW2uMS41iDMq6aBjPhDgvi/iyG4w
 GBeZFjUUXQ8Wtp5fZJ1RgV/2PFg3W1REodvM143Ge84UUmnltf/snmx3NMQWw5wu
 coZFSIpcachMRxZ+bbLtJnCoRWG+8lkmTXYkswRWGez+WniscR0898RRpD0lJgIA
 cgeX5Cg/EbBIpwcqjsW2018WlsH5qp4rb6wVuqTY2kzbG+FUyKSqxSwGZw==
 =9GLQ
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Speed up AddressSpaceDispatch creation (Alexey)
* Fix kvm.c assert (David)
* Memory fixes and further speedup (me)
* Persistent reservation manager infrastructure (me)
* virtio-serial: add enable_backend callback (Pavel)
* chardev GMainContext fixes (Peter)

# gpg: Signature made Fri 22 Sep 2017 20:07:33 BST
# gpg:                using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (32 commits)
  chardev: remove context in chr_update_read_handler
  chardev: use per-dev context for io_add_watch_poll
  chardev: add Chardev.gcontext field
  chardev: new qemu_chr_be_update_read_handlers()
  scsi: add persistent reservation manager using qemu-pr-helper
  scsi: add multipath support to qemu-pr-helper
  scsi: build qemu-pr-helper
  scsi, file-posix: add support for persistent reservation management
  memory: Share special empty FlatView
  memory: seek FlatView sharing candidates among children subregions
  memory: trace FlatView creation and destruction
  memory: Create FlatView directly
  memory: Get rid of address_space_init_shareable
  memory: Rework "info mtree" to print flat views and dispatch trees
  memory: Do not allocate FlatView in address_space_init
  memory: Share FlatView's and dispatch trees between address spaces
  memory: Move address_space_update_ioeventfds
  memory: Alloc dispatch tree where topology is generared
  memory: Store physical root MR in FlatView
  memory: Rename mem_begin/mem_commit/mem_add helpers
  ...

# Conflicts:
#	configure
2017-09-23 12:55:40 +01:00
Alexey Kardashevskiy b516572f31 memory: Get rid of address_space_init_shareable
Since FlatViews are shared now and ASes not, this gets rid of
address_space_init_shareable().

This should cause no behavioural change.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20170921085110.25598-17-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-22 01:06:51 +02:00
Peter Maydell 4ce31af4ae target/arm: Remove out of date ARM ARM section references in A64 decoder
In the A64 decoder, we have a lot of references to section numbers
from version A.a of the v8A ARM ARM (DDI0487). This version of the
document is now long obsolete (we are currently on revision B.a),
and various intervening versions renumbered all the sections.

The most recent B.a version of the document doesn't assign
section numbers at all to the individual instruction classes
in the way that the various A.x versions did. The simplest thing
to do is just to delete all the out of date C.x.x references.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20170915150849.23557-1-peter.maydell@linaro.org
2017-09-21 16:32:25 +01:00
Peter Maydell 5cb18069d7 nvic: Support banked exceptions in acknowledge and complete
Update armv7m_nvic_acknowledge_irq() and armv7m_nvic_complete_irq()
to handle banked exceptions:
 * acknowledge needs to use the correct vector, which may be
   in sec_vectors[]
 * acknowledge needs to return to its caller whether the
   exception should be taken to secure or non-secure state
 * complete needs its caller to tell it whether the exception
   being completed is a secure one or not

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1505240046-11454-20-git-send-email-peter.maydell@linaro.org
2017-09-21 16:31:09 +01:00
Peter Maydell 5d4791991d target/arm: Handle banking in negative-execution-priority check in cpu_mmu_index()
Now that we have a banked FAULTMASK register and banked exceptions,
we can implement the correct check in cpu_mmu_index() for whether
the MPU_CTRL.HFNMIENA bit's effect should apply. This bit causes
handlers which have requested a negative execution priority to run
with the MPU disabled. In v8M the test has to check this for the
current security state and so takes account of banking.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1505240046-11454-17-git-send-email-peter.maydell@linaro.org
2017-09-21 16:31:09 +01:00
Peter Maydell 2fb50a3340 nvic: Make set_pending and clear_pending take a secure parameter
Make the armv7m_nvic_set_pending() and armv7m_nvic_clear_pending()
functions take a bool indicating whether to pend the secure
or non-secure version of a banked interrupt, and update the
callsites accordingly.

In most callsites we can simply pass the correct security
state in; in a couple of cases we use TODO comments to indicate
that we will return the code in a subsequent commit.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1505240046-11454-10-git-send-email-peter.maydell@linaro.org
2017-09-21 16:31:09 +01:00
Peter Maydell 3b2e934463 nvic: Implement AIRCR changes for v8M
The Application Interrupt and Reset Control Register has some changes
for v8M:
 * new bits SYSRESETREQS, BFHFNMINS and PRIS: these all have
   real state if the security extension is implemented and otherwise
   are constant
 * the PRIGROUP field is banked between security states
 * non-secure code can be blocked from using the SYSRESET bit
   to reset the system if SYSRESETREQS is set

Implement the new state and the changes to register read and write.
For the moment we ignore the effects of the secure PRIGROUP.
We will implement the effects of PRIS and BFHFNMIS later.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1505240046-11454-6-git-send-email-peter.maydell@linaro.org
2017-09-21 16:29:27 +01:00
Peter Maydell 50f11062d4 target/arm: Implement MSR/MRS access to NS banked registers
In v8M the MSR and MRS instructions have extra register value
encodings to allow secure code to access the non-secure banked
version of various special registers.

(We don't implement the MSPLIM_NS or PSPLIM_NS aliases, because
we don't currently implement the stack limit registers at all.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1505240046-11454-2-git-send-email-peter.maydell@linaro.org
2017-09-21 16:28:23 +01:00
Igor Mammedov ba1ba5cca3 arm: drop intermediate cpu_model -> cpu type parsing and use cpu type directly
there are 2 use cases to deal with:
  1: fixed CPU models per board/soc
  2: boards with user configurable cpu_model and fallback to
     default cpu_model if user hasn't specified one explicitly

For the 1st
  drop intermediate cpu_model parsing and use const cpu type
  directly, which replaces:
     typename = object_class_get_name(
           cpu_class_by_name(TYPE_ARM_CPU, cpu_model))
     object_new(typename)
  with
     object_new(FOO_CPU_TYPE_NAME)
  or
     cpu_generic_init(BASE_CPU_TYPE, "my cpu model")
  with
     cpu_create(FOO_CPU_TYPE_NAME)

as result 1st use case doesn't have to invoke not necessary
translation and not needed code is removed.

For the 2nd
 1: set default cpu type with MachineClass::default_cpu_type and
 2: use generic cpu_model parsing that done before machine_init()
    is run and:
    2.1: drop custom cpu_model parsing where pattern is:
       typename = object_class_get_name(
           cpu_class_by_name(TYPE_ARM_CPU, cpu_model))
       [parse_features(typename, cpu_model, &err) ]

    2.2: or replace cpu_generic_init() which does what
         2.1 does + create_cpu(typename) with just
         create_cpu(machine->cpu_type)
as result cpu_name -> cpu_type translation is done using
generic machine code one including parsing optional features
if supported/present (removes a bunch of duplicated cpu_model
parsing code) and default cpu type is defined in an uniform way
within machine_class_init callbacks instead of adhoc places
in boadr's machine_init code.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1505318697-77161-6-git-send-email-imammedo@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-09-19 09:09:32 -03:00
Richard Henderson 37e29a6425 target/arm: Avoid an extra temporary for store_exclusive
Instead of copying addr to a local temp, reuse the value (which we
have just compared as equal) already saved in cpu_exclusive_addr.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20170908163859.29820-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-14 18:43:18 +01:00
Jaroslaw Pelczar dddbba9943 AArch64: Fix single stepping of ERET instruction
Previously when single stepping through ERET instruction via GDB
would result in debugger entering the "next" PC after ERET instruction.
When debugging in kernel mode, this will also cause unintended behavior,
because debugger will try to access memory from EL0 point of view.

Signed-off-by: Jaroslaw Pelczar <j.pelczar@samsung.com>
Message-id: 001c01d32895$483027f0$d89077d0$@samsung.com
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-14 18:43:18 +01:00
Peter Maydell 351e527a61 target/arm: Rename 'type' to 'excret' in do_v7m_exception_exit()
In the v7M and v8M ARM ARM, the magic exception return values are
referred to as EXC_RETURN values, and in QEMU we use V7M_EXCRET_*
constants to define bits within them. Rename the 'type' variable
which holds the exception return value in do_v7m_exception_exit()
to excret, making it clearer that it does hold an EXC_RETURN value.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1505137930-13255-8-git-send-email-peter.maydell@linaro.org
2017-09-14 18:43:17 +01:00
Peter Maydell 4d1e7a4745 target/arm: Add and use defines for EXCRET constants
The exception-return magic values get some new bits in v8M, which
makes some bit definitions for them worthwhile.

We don't use the bit definitions for the switch on the low bits
which checks the return type for v7M, because this is defined
in the v7M ARM ARM as a set of valid values rather than via
per-bit checks.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1505137930-13255-7-git-send-email-peter.maydell@linaro.org
2017-09-14 18:43:17 +01:00
Peter Maydell 7115cdf578 target/arm: Remove unnecessary '| 0xf0000000' from do_v7m_exception_exit()
In do_v7m_exception_exit(), there's no need to force the high 4
bits of 'type' to 1 when calling v7m_exception_taken(), because
we know that they're always 1 or we could not have got to this
"handle return to magic exception return address" code. Remove
the unnecessary ORs.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1505137930-13255-6-git-send-email-peter.maydell@linaro.org
2017-09-14 18:43:17 +01:00
Peter Maydell c615887865 target/arm: Get PRECISERR and IBUSERR the right way round
For a bus fault, the M profile BFSR bit PRECISERR means a bus
fault on a data access, and IBUSERR means a bus fault on an
instruction access. We had these the wrong way around; fix this.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1505137930-13255-4-git-send-email-peter.maydell@linaro.org
2017-09-14 18:43:17 +01:00
Peter Maydell dc3c4c14f0 target/arm: Clear exclusive monitor on v7M reset, exception entry/exit
For M profile we must clear the exclusive monitor on reset, exception
entry and exception exit.  We weren't doing any of these things; fix
this bug.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1505137930-13255-3-git-send-email-peter.maydell@linaro.org
2017-09-14 18:43:16 +01:00
Peter Maydell 4a16724f06 target/arm: Use M_REG_NUM_BANKS rather than hardcoding 2
Use a symbolic constant M_REG_NUM_BANKS for the array size for
registers which are banked by M profile security state, rather
than hardcoding lots of 2s.

Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1505137930-13255-2-git-send-email-peter.maydell@linaro.org
2017-09-14 18:43:16 +01:00
Laurent Vivier 6dba634097 hmp: fix "dump-quest-memory" segfault (arm)
Running QEMU with
    qemu-system-aarch64 -M none -nographic -m 256
and executing
    dump-guest-memory /dev/null 0 8192
results in segfault

Fix by checking if we have CPU, and exit with
error if there is no CPU:

    (qemu) dump-guest-memory /dev/null
    this feature or command is not currently supported

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20170913142036.2469-3-lvivier@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-09-14 15:52:10 +01:00
Peter Maydell ef475b5dd1 target-arm:
* cleanups converting to DEFINE_PROP_LINK
  * allwinner-a10: mark as not user-creatable
  * initial patches working towards ARMv8M support
  * implement generating aborts on memory transaction failures
  * make BXJ behave correctly (ie not UNDEF) on ARMv6-and-later
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJZsUjvAAoJEDwlJe0UNgzey10P+wf1TRxRMGnoDftimLyPt9Pt
 cXYSP1KKF4qn618ZSJHPHJasWEx2obAP8JrrA8qLz0quWpWlXZ40bhgxKX9iKb2l
 4jrt/DjfTH7RWMRs94lOb0ZOtMokLfjHMSBhP31xR4Lgia0HdlmwqUPLr2T10ffE
 B9BKvPbXcee9Ss7osDqQr3OMUtSMjuc3G3z3WaySwG80od9MB8mblnMU0h9gZEeT
 6csGRHU8rfOkv9ZzrSJRWBuhmxC0Mrg3lB3iZffupFnI//q+PZfW2+ojAyn+pATu
 3YgHjgfgw4P5N2iGlg8c4y6mrig0fQNHWIXWFk7zWp7kWCdXnq5doFpJmi+CfMlE
 yQqMYzuy2Bd9n2fAB036nvb1LBHEKFYfKxqPoeJzuB9wEcXjmnbwuJ+iAKo/DP94
 9wE/cPNKySFmZJFEz+byAZvnEp0ynpQtDoCnaIJPbx6ytkKfL9xXX78+mmlTn8hj
 55NyH2aaEXpuxJKkld1pP2O+r/amFJ603rujSEaK0Or2YGcE1fit+YZSSh1glt25
 b3vEKn1ydWV4udRjBIEd0l/PIhGenILXC3bDONiWqEIPaMVeOxjhl+lvEHmELOjd
 t+o4ntQfU94Z6eDXPhx/bXqIZi9qtDbMZosojWL6wMAIMEiuXlB/a9vhcs9uBnRJ
 M0PiR5jVpZgDfLipV/8A
 =URgX
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20170907' into staging

target-arm:
 * cleanups converting to DEFINE_PROP_LINK
 * allwinner-a10: mark as not user-creatable
 * initial patches working towards ARMv8M support
 * implement generating aborts on memory transaction failures
 * make BXJ behave correctly (ie not UNDEF) on ARMv6-and-later

# gpg: Signature made Thu 07 Sep 2017 14:26:07 BST
# gpg:                using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20170907: (31 commits)
  target/arm: Add Jazelle feature
  target/arm: Implement new do_transaction_failed hook
  hw/arm: Set ignore_memory_transaction_failures for most ARM boards
  boards.h: Define new flag ignore_memory_transaction_failures
  target/arm: Implement BXNS, and banked stack pointers
  target/arm: Move regime_is_secure() to target/arm/internals.h
  target/arm: Make CFSR register banked for v8M
  target/arm: Make MMFAR banked for v8M
  target/arm: Make CCR register banked for v8M
  target/arm: Make MPU_CTRL register banked for v8M
  target/arm: Make MPU_RNR register banked for v8M
  target/arm: Make MPU_RBAR, MPU_RLAR banked for v8M
  target/arm: Make MPU_MAIR0, MPU_MAIR1 registers banked for v8M
  target/arm: Make VTOR register banked for v8M
  nvic: Add NS alias SCS region
  target/arm: Make CONTROL register banked for v8M
  target/arm: Make FAULTMASK register banked for v8M
  target/arm: Make PRIMASK register banked for v8M
  target/arm: Make BASEPRI register banked for v8M
  target/arm: Add MMU indexes for secure v8M
  ...

# Conflicts:
#	target/arm/translate.c
2017-09-07 16:46:15 +01:00
Portia Stephens c99a55d38d target/arm: Add Jazelle feature
This adds a feature bit indicating support of the (trivial) Jazelle
implementation if ARM_FEATURE_V6 is set or if the processor is arm926
or arm1026.  This fixes the issue that any BXJ instruction will
result in an illegal_op.  BXJ instructions will now check if the
architecture supports ARM_FEATURE_JAZELLE.

Signed-off-by: Portia Stephens <portia.stephens@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20170905211232.11092-1-portia.stephens@xilinx.com
[PMM: edited commit message and comment text a bit]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-07 13:54:55 +01:00
Peter Maydell c79c0a314c target/arm: Implement new do_transaction_failed hook
Implement the new do_transaction_failed hook for ARM, which should
cause the CPU to take a prefetch abort or data abort.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1504626814-23124-4-git-send-email-peter.maydell@linaro.org
2017-09-07 13:54:55 +01:00
Peter Maydell fb602cb726 target/arm: Implement BXNS, and banked stack pointers
Implement the BXNS v8M instruction, which is like BX but will do a
jump-and-switch-to-NonSecure if the branch target address has bit 0
clear.

This is the first piece of code which implements "switch to the
other security state", so the commit also includes the code to
switch the stack pointers around, which is the only complicated
part of switching security state.

BLXNS is more complicated than just "BXNS but set the link register",
so we leave it for a separate commit.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1503414539-28762-21-git-send-email-peter.maydell@linaro.org
2017-09-07 13:54:54 +01:00
Peter Maydell 61fcd69b0d target/arm: Move regime_is_secure() to target/arm/internals.h
Move the regime_is_secure() utility function to internals.h;
we are going to want to call it from translate.c.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1503414539-28762-20-git-send-email-peter.maydell@linaro.org
2017-09-07 13:54:54 +01:00
Peter Maydell 334e8dad7a target/arm: Make CFSR register banked for v8M
Make the CFSR register banked if v8M security extensions are enabled.

Not all the bits in this register are banked: the BFSR
bits [15:8] are shared between S and NS, and we store them
in the NS copy of the register.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1503414539-28762-19-git-send-email-peter.maydell@linaro.org
2017-09-07 13:54:54 +01:00
Peter Maydell c51a5cfc9f target/arm: Make MMFAR banked for v8M
Make the MMFAR register banked if v8M security extensions are
enabled.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1503414539-28762-18-git-send-email-peter.maydell@linaro.org
2017-09-07 13:54:54 +01:00
Peter Maydell 9d40cd8a68 target/arm: Make CCR register banked for v8M
Make the CCR register banked if v8M security extensions are enabled.

This is slightly more complicated than the other "add banking"
patches because there is one bit in the register which is not
banked. We keep the live data in the NS copy of the register,
and adjust it on register reads and writes. (Since we don't
currently implement the behaviour that the bit controls, there
is nowhere else that needs to care.)

This patch includes the enforcement of the bits which are newly
RES1 in ARMv8M.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1503414539-28762-17-git-send-email-peter.maydell@linaro.org
2017-09-07 13:54:54 +01:00
Peter Maydell ecf5e8eae8 target/arm: Make MPU_CTRL register banked for v8M
Make the MPU_CTRL register banked if v8M security extensions are
enabled.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1503414539-28762-16-git-send-email-peter.maydell@linaro.org
2017-09-07 13:54:53 +01:00
Peter Maydell 1bc04a8880 target/arm: Make MPU_RNR register banked for v8M
Make the MPU_RNR register banked if v8M security extensions are
enabled.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1503414539-28762-15-git-send-email-peter.maydell@linaro.org
2017-09-07 13:54:53 +01:00
Peter Maydell 62c58ee0b2 target/arm: Make MPU_RBAR, MPU_RLAR banked for v8M
Make the MPU registers MPU_MAIR0 and MPU_MAIR1 banked if v8M security
extensions are enabled.

We can freely add more items to vmstate_m_security without
breaking migration compatibility, because no CPU currently
has the ARM_FEATURE_M_SECURITY bit enabled and so this
subsection is not yet used by anything.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1503414539-28762-14-git-send-email-peter.maydell@linaro.org
2017-09-07 13:54:53 +01:00
Peter Maydell 4125e6feb7 target/arm: Make MPU_MAIR0, MPU_MAIR1 registers banked for v8M
Make the MPU registers MPU_MAIR0 and MPU_MAIR1 banked if v8M security
extensions are enabled.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1503414539-28762-13-git-send-email-peter.maydell@linaro.org
2017-09-07 13:54:53 +01:00
Peter Maydell 45db7ba681 target/arm: Make VTOR register banked for v8M
Make the VTOR register banked if v8M security extensions are enabled.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1503414539-28762-12-git-send-email-peter.maydell@linaro.org
2017-09-07 13:54:53 +01:00
Peter Maydell 8bfc26ea30 target/arm: Make CONTROL register banked for v8M
Make the CONTROL register banked if v8M security extensions are enabled.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1503414539-28762-10-git-send-email-peter.maydell@linaro.org
2017-09-07 13:54:53 +01:00
Peter Maydell 42a6686b2f target/arm: Make FAULTMASK register banked for v8M
Make the FAULTMASK register banked if v8M security extensions are enabled.

Note that we do not yet implement the functionality of the new
AIRCR.PRIS bit (which allows the effect of the NS copy of FAULTMASK to
be restricted).

This patch includes the code to determine for v8M which copy
of FAULTMASK should be updated on exception exit; further
changes will be required to the exception exit code in general
to support v8M, so this is just a small piece of that.

The v8M ARM ARM introduces a notation where individual paragraphs
are labelled with R (for rule) or I (for information) followed
by a random group of subscript letters. In comments where we want
to refer to a particular part of the manual we use this convention,
which should be more stable across document revisions than using
section or page numbers.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1503414539-28762-9-git-send-email-peter.maydell@linaro.org
2017-09-07 13:54:52 +01:00
Peter Maydell 6d80483419 target/arm: Make PRIMASK register banked for v8M
Make the PRIMASK register banked if v8M security extensions are enabled.

Note that we do not yet implement the functionality of the new
AIRCR.PRIS bit (which allows the effect of the NS copy of PRIMASK to
be restricted).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1503414539-28762-8-git-send-email-peter.maydell@linaro.org
2017-09-07 13:54:52 +01:00
Peter Maydell acf949411f target/arm: Make BASEPRI register banked for v8M
Make the BASEPRI register banked if v8M security extensions are enabled.

Note that we do not yet implement the functionality of the new
AIRCR.PRIS bit (which allows the effect of the NS copy of BASEPRI to
be restricted).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1503414539-28762-7-git-send-email-peter.maydell@linaro.org
2017-09-07 13:54:52 +01:00
Peter Maydell 66787c7868 target/arm: Add MMU indexes for secure v8M
Now that MPU lookups can return different results for v8M
when the CPU is in secure vs non-secure state, we need to
have separate MMU indexes; add the secure counterparts
to the existing three M profile MMU indexes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1503414539-28762-6-git-send-email-peter.maydell@linaro.org
2017-09-07 13:54:52 +01:00
Peter Maydell 1d2091bc75 target/arm: Register second AddressSpace for secure v8M CPUs
If a v8M CPU supports the security extension then we need to
give it two AddressSpaces, the same way we do already for
an A profile core with EL3.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1503414539-28762-5-git-send-email-peter.maydell@linaro.org
2017-09-07 13:54:52 +01:00
Peter Maydell 1e577cc7cf target/arm: Add state field, feature bit and migration for v8M secure state
As the first step in implementing ARM v8M's security extension:
 * add a new feature bit ARM_FEATURE_M_SECURITY
 * add the CPU state field that indicates whether the CPU is
   currently in the secure state
 * add a migration subsection for this new state
   (we will add the Secure copies of banked register state
   to this subsection in later patches)
 * add a #define for the one new-in-v8M exception type
 * make the CPU debug log print S/NS status

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1503414539-28762-4-git-send-email-peter.maydell@linaro.org
2017-09-07 13:54:52 +01:00
Peter Maydell 504e3cc36b target/arm: Implement new PMSAv8 behaviour
Implement the behavioural side of the new PMSAv8 specification.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1503414539-28762-3-git-send-email-peter.maydell@linaro.org
2017-09-07 13:54:51 +01:00
Peter Maydell 0e1a46bbd2 target/arm: Implement ARMv8M's PMSAv8 registers
As part of ARMv8M, we need to add support for the PMSAv8 MPU
architecture.

PMSAv8 differs from PMSAv7 both in register/data layout (for instance
using base and limit registers rather than base and size) and also in
behaviour (for example it does not have subregions); rather than
trying to wedge it into the existing PMSAv7 code and data structures,
we define separate ones.

This commit adds the data structures which hold the state for a
PMSAv8 MPU and the register interface to it.  The implementation of
the MPU behaviour will be added in a subsequent commit.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1503414539-28762-2-git-send-email-peter.maydell@linaro.org
2017-09-07 13:54:51 +01:00
Richard Henderson d0264d86b0 target/arm: Perform per-insn cross-page check only for Thumb
ARM is a fixed-length ISA and we can compute the page crossing
condition exactly once during init_disas_context.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-06 08:06:48 -07:00
Richard Henderson 722ef0a562 target/arm: Split out thumb_tr_translate_insn
We need not check for ARM vs Thumb state in order to dispatch
disassembly of every instruction.

Tested-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-06 08:06:48 -07:00
Richard Henderson f7708456aa target/arm: Move ss check to init_disas_context
We can check for single-step just once.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-06 08:06:48 -07:00
Richard Henderson dcc3a21209 target/arm: [a64] Move page and ss checks to init_disas_context
Since AArch64 uses a fixed-width ISA, we can pre-compute the number of
insns remaining on the page.  Also, we can check for single-step once.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-06 08:06:48 -07:00
Lluís Vilanova 2316922420 target/arm: [tcg] Port to generic translation framework
Tested-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-Id: <150002631325.22386.10348327185029496649.stgit@frigg.lan>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-06 08:06:48 -07:00
Lluís Vilanova 58350fa4b2 target/arm: [tcg,a64] Port to disas_log
Incrementally paves the way towards using the generic instruction translation
loop.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-Id: <150002606914.22386.15524101311003685068.stgit@frigg.lan>
[rth: Move tb->size computation and use that result.]
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-06 08:06:48 -07:00
Lluís Vilanova 4013f7fc81 target/arm: [tcg] Port to disas_log
Incrementally paves the way towards using the generic instruction translation
loop.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Benneé <alex.benee@linaro.org>
Message-Id: <150002582711.22386.191527630537864599.stgit@frigg.lan>
[rth: Move tb->size computation and use that result.]
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-06 08:06:48 -07:00
Lluís Vilanova be4079641f target/arm: [tcg,a64] Port to tb_stop
Incrementally paves the way towards using the generic instruction translation
loop.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-Id: <150002558503.22386.1149037590886263349.stgit@frigg.lan>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-06 08:06:48 -07:00
Lluís Vilanova 70d3c035ae target/arm: [tcg] Port to tb_stop
Incrementally paves the way towards using the generic instruction translation
loop.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-Id: <150002534291.22386.13499916738708680298.stgit@frigg.lan>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-06 08:06:48 -07:00
Lluís Vilanova 24299c892c target/arm: [tcg,a64] Port to translate_insn
Incrementally paves the way towards using the generic instruction translation
loop.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-Id: <150002510079.22386.10164419868911710218.stgit@frigg.lan>
[rth: Adjust for translate_insn interface change.]
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-06 08:06:47 -07:00
Lluís Vilanova 13189a9080 target/arm: [tcg] Port to translate_insn
Incrementally paves the way towards using the generic instruction translation
loop.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-Id: <150002485863.22386.13949856269576226529.stgit@frigg.lan>
[rth: Adjust for translate_insn interface change.]
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-06 08:06:47 -07:00
Lluís Vilanova 0cb56b373d target/arm: [tcg,a64] Port to breakpoint_check
Incrementally paves the way towards using the generic instruction translation
loop.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-Id: <150002461630.22386.14827196109258040543.stgit@frigg.lan>
[rth: Use DISAS_TOO_MANY for "execute only one more" after bp.]
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-06 08:06:47 -07:00
Lluís Vilanova a68956ad7f target/arm: [tcg,a64] Port to insn_start
Incrementally paves the way towards using the generic instruction translation
loop.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Benneé <alex.benee@linaro.org>
Message-Id: <150002413187.22386.156315485813606121.stgit@frigg.lan>
[rth: Use DISAS_TOO_MANY for "execute only one more" after bp.]
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-06 08:06:47 -07:00
Lluís Vilanova f62bd897e6 target/arm: [tcg] Port to insn_start
Incrementally paves the way towards using the generic instruction translation
loop.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Benneé <alex.benee@linaro.org>
Message-Id: <150002388959.22386.12439646324427589940.stgit@frigg.lan>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-06 08:06:47 -07:00
Lluís Vilanova b14768544f target/arm: [tcg] Port to tb_start
Incrementally paves the way towards using the generic instruction translation
loop.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Benneé <alex.benee@linaro.org>
Message-Id: <150002364681.22386.1701754996184325808.stgit@frigg.lan>
[rth: Adjust for tb_start interface change.]
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-06 08:06:47 -07:00
Lluís Vilanova 5c03990665 target/arm: [tcg,a64] Port to init_disas_context
Incrementally paves the way towards using the generic instruction translation
loop.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Benneé <alex.benee@linaro.org>
Message-Id: <150002340430.22386.10889954302345646107.stgit@frigg.lan>
[rth: Adjust for max_insns interface change.]
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-06 08:06:47 -07:00
Lluís Vilanova 1d8a553523 target/arm: [tcg] Port to init_disas_context
Incrementally paves the way towards using the generic instruction translation
loop.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Benneé <alex.benee@linaro.org>
Message-Id: <150002316201.22386.12115078843605656029.stgit@frigg.lan>
[rth: Adjust for max_insns interface change.]
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-06 08:06:47 -07:00
Lluís Vilanova dcba3a8d44 target/arm: [tcg] Port to DisasContextBase
Incrementally paves the way towards using the generic
instruction translation loop.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Benneé <alex.benee@linaro.org>
Message-Id: <150002291931.22386.11441154993010495674.stgit@frigg.lan>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-06 08:06:47 -07:00
Richard Henderson 3805c2eba8 target/arm: Delay check for magic kernel page
There's nothing magic about the exception that we generate in order
to execute the magic kernel page.  We can and should allow gdb to
set a breakpoint at this location.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-06 08:06:47 -07:00
Lluís Vilanova 77fc6f5e28 target: [tcg] Use a generic enum for DISAS_ values
Used later. An enum makes expected values explicit and
bounds the value space of switches.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <150002049746.22386.2316077281615710615.stgit@frigg.lan>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-06 08:06:47 -07:00
Richard Henderson a0c231e651 target/arm: Use DISAS_NORETURN
Fold DISAS_EXC and DISAS_TB_JUMP into DISAS_NORETURN.

In both cases all following code is dead.  In the first
case because we have exited the TB via exception; in the
second case because we have exited the TB via goto_tb
and its associated machinery.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-06 08:06:47 -07:00
Richard Henderson 3e4d91b94c target/arm: Fix aa64 ldp register writeback
For "ldp x0, x1, [x0]", if the second load is on a second page and
the second page is unmapped, the exception would be raised with x0
already modified.  This means the instruction couldn't be restarted.

Cc: qemu-arm@nongnu.org
Cc: qemu-stable@nongnu.org
Reported-by: Andrew <andrew@fubar.geek.nz>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20170825224833.4463-1-richard.henderson@linaro.org
Fixes: https://bugs.launchpad.net/qemu/+bug/1713066
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMM: tweaked comment format]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-04 17:13:53 +01:00
Peter Maydell c528af7aa6 target/arm: Allow deliver_fault() caller to specify EA bit
For external aborts, we will want to be able to specify the EA
(external abort type) bit in the syndrome field.  Allow callers of
deliver_fault() to do that by adding a field to ARMMMUFaultInfo which
we use when constructing the syndrome values.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2017-09-04 17:13:53 +01:00
Peter Maydell aac43da1d7 target/arm: Factor out fault delivery code
We currently have some similar code in tlb_fill() and in
arm_cpu_do_unaligned_access() for delivering a data abort or prefetch
abort.  We're also going to want to do the same thing to handle
external aborts.  Factor out the common code into a new function
deliver_fault().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2017-09-04 17:13:53 +01:00
Andrew Jones b2bfe9f7f1 target/arm/kvm: pmu: improve error handling
If a KVM PMU init or set-irq attr call fails we just silently stop
the PMU DT node generation. The only way they could fail, though,
is if the attr's respective KVM has-attr call fails. But that should
never happen if KVM advertises the PMU capability, because both
attrs have been available since the capability was introduced. Let's
just abort if this should-never-happen stuff does happen, because,
if it does, then something is obviously horribly wrong.

Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Christoffer Dall <cdall@linaro.org>
Message-id: 1500471597-2517-5-git-send-email-drjones@redhat.com
[PMM: change kvm32.c kvm_arm_pmu_init() to the new API too]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-04 15:21:54 +01:00
Andrew Jones b16595275b hw/arm/virt: allow pmu instantiation with userspace irqchip
Move the in-kernel-irqchip test to only guard the set-irq
stage, not the init stage of the PMU.  Also add the PMU to
the KVM device irq line synchronization to enable its use.

Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Christoffer Dall <cdall@linaro.org>
Message-id: 1500471597-2517-4-git-send-email-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-04 15:21:54 +01:00
Andrew Jones 3f07cb2aab target/arm/kvm: pmu: split init and set-irq stages
When adding a PMU with a userspace irqchip we skip the set-irq
stage of device creation. Split the 'create' function into two
functions 'init' and 'set-irq' so they may be called separately.

Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Christoffer Dall <cdall@linaro.org>
Message-id: 1500471597-2517-3-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-04 15:21:54 +01:00
Andrew Jones 07f48730bc hw/arm/virt: add pmu interrupt state
Mimicking gicv3-maintenance-interrupt, add the PMU's interrupt to
CPU state.

Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1500471597-2517-2-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-04 15:21:53 +01:00
Peter Maydell 15b3f556ba target/arm: Create and use new function arm_v7m_is_handler_mode()
Add a utility function for testing whether the CPU is in Handler
mode; this is just a check whether v7m.exception is non-zero, but
we do it in several places and it makes the code a bit easier
to read to not have to mentally figure out what the test is testing.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1501692241-23310-14-git-send-email-peter.maydell@linaro.org
2017-09-04 15:21:53 +01:00
Peter Maydell bd70b29ba9 target/arm: Don't calculate lr in arm_v7m_cpu_do_interrupt() until needed
Move the code in arm_v7m_cpu_do_interrupt() that calculates the
magic LR value down to when we're actually going to use it.
Having the calculation and use so far apart makes the code
a little harder to understand than it needs to be.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1501692241-23310-13-git-send-email-peter.maydell@linaro.org
2017-09-04 15:21:53 +01:00
Peter Maydell 5b906f3589 target/arm: Make arm_cpu_dump_state() handle the M-profile XPSR
Make the arm_cpu_dump_state() debug logging handle the M-profile XPSR
rather than assuming it's an A-profile CPSR.  On M profile the PSR
line of a register dump will now look like this:

XPSR=41000000 -Z-- T priv-thread

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1501692241-23310-12-git-send-email-peter.maydell@linaro.org
2017-09-04 15:21:52 +01:00
Peter Maydell eeade00176 target/arm: Don't use cpsr_write/cpsr_read to transfer M profile XPSR
For M profile the XPSR is a similar but not identical format to the
A profile CPSR/SPSR. (For instance the Thumb bit is in a different
place.) For guest accesses we make the M profile code go through
xpsr_read() and xpsr_write() which handle the different layout.
However for migration we use cpsr_read() and cpsr_write() to
marshal state into and out of the migration data stream. This
is pretty confusing and works more by luck than anything else.
Make M profile migration use xpsr_read() and xpsr_write() instead.

The most complicated part of this is handling the possibility
that the migration source is an older QEMU which hands us a
CPSR format value; helpfully we can always tell the two apart.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1501692241-23310-11-git-send-email-peter.maydell@linaro.org
2017-09-04 15:21:52 +01:00
Peter Maydell e6ae5981ea target/arm: Don't store M profile PRIMASK and FAULTMASK in daif
We currently store the M profile CPU register state PRIMASK and
FAULTMASK in the daif field of the CPU state in its I and F
bits. This is a legacy from the original implementation, which
tried to share the cpu_exec_interrupt code between A profile
and M profile. We've since separated out the two cases because
they are significantly different, so now there is no common
code between M and A profile which looks at env->daif: all the
uses are either in A-only or M-only code paths. Sharing the state
fields now is just confusing, and will make things awkward
when we implement v8M, where the PRIMASK and FAULTMASK
registers are banked between security states.

Switch M profile over to using v7m.faultmask and v7m.primask
fields for these registers.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1501692241-23310-10-git-send-email-peter.maydell@linaro.org
2017-09-04 15:21:52 +01:00
Peter Maydell 987ab45e10 target/arm: Define and use XPSR bit masks
The M profile XPSR is almost the same format as the A profile CPSR,
but not quite. Define some XPSR_* macros and use them where we
definitely dealing with an XPSR rather than reusing the CPSR ones.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1501692241-23310-9-git-send-email-peter.maydell@linaro.org
2017-09-04 15:21:52 +01:00
Peter Maydell 9d17da4b68 target/arm: Fix outdated comment about exception exit
When we switched our handling of exception exit to detect
the magic addresses at translate time rather than via
a do_unassigned_access hook, we forgot to update a
comment; correct the omission.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1501692241-23310-8-git-send-email-peter.maydell@linaro.org
2017-09-04 15:21:52 +01:00
Peter Maydell 59e4972c3f target/arm: Remove incorrect comment about MPU_CTRL
Remove the comment that claims that some MPU_CTRL bits are stored
in sctlr_el[1]. This has never been true since MPU_CTRL was added
in commit 29c483a506 -- the comment is a leftover from
Michael Davidsaver's original implementation, which I modified
not to use sctlr_el[1]; I forgot to delete the comment then.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1501692241-23310-7-git-send-email-peter.maydell@linaro.org
2017-09-04 15:21:52 +01:00
Peter Maydell ebfe27c593 target/arm: Tighten up Thumb decode where new v8M insns will be
Tighten up the T32 decoder in the places where new v8M instructions
will be:
 * TT/TTT/TTA/TTAT are in what was nominally LDREX/STREX r15, ...
   which is UNPREDICTABLE:
   make the UNPREDICTABLE behaviour be to UNDEF
 * BXNS/BLXNS are distinguished from BX/BLX via the low 3 bits,
   which in previous architectural versions are SBZ:
   enforce the SBZ via UNDEF rather than ignoring it, and move
   the "ARCH(5)" UNDEF case up so we don't leak a TCG temporary
 * SG is in the encoding which would be LDRD/STRD with rn = r15;
   this is UNPREDICTABLE and we currently UNDEF:
   move this check further up the code so that we don't leak
   TCG temporaries in the UNDEF case and have a better place
   to put the SG decode.

This means that if a v8M binary is accidentally run on v7M
or if a test case hits something that we haven't implemented
yet the behaviour will be obvious (UNDEF) rather than obscure
(plough on treating it as a different instruction).

In the process, add some comments about the instruction patterns
at these points in the decode. Our Thumb and ARM decoders are
very difficult to understand currently, but gradually adding
comments like this should help to clarify what exactly has
been decoded when.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1501692241-23310-5-git-send-email-peter.maydell@linaro.org
2017-09-04 15:21:51 +01:00
Peter Maydell 3279adb95e target/arm: Consolidate PMSA handling in get_phys_addr()
Currently get_phys_addr() has PMSAv7 handling before the
"is translation disabled?" check, and then PMSAv5 after it.
Tidy this up by making the PMSAv5 code handle the "MPU disabled"
case itself, so that we have all the PMSA code in one place.
This will make adding the PMSAv8 code slightly cleaner, and
also means that pre-v7 PMSA cores benefit from the MPU lookup
logging that the PMSAv7 codepath had.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1501692241-23310-4-git-send-email-peter.maydell@linaro.org
2017-09-04 15:21:51 +01:00
Peter Maydell 0e2845689e target/arm: Don't trap WFI/WFE for M profile
M profile cores can never trap on WFI or WFE instructions. Check for
M profile in check_wfx_trap() to ensure this.

The existing code will do the right thing for v7M cores because
the hcr_el2 and scr_el3 registers will be all-zeroes and so we
won't attempt to trap, but when we start setting ARM_FEATURE_V8
for v8M cores the v8A handling of SCTLR.nTWE and .nTWI will not
give the right results.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1501692241-23310-3-git-send-email-peter.maydell@linaro.org
2017-09-04 15:21:51 +01:00
Peter Maydell 03ae85f858 target/arm: Use MMUAccessType enum rather than int
In the ARM get_phys_addr() code, switch to using the MMUAccessType
enum and its MMU_* values rather than int and literal 0/1/2.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1501692241-23310-2-git-send-email-peter.maydell@linaro.org
2017-09-04 15:21:51 +01:00
Igor Mammedov 701e3c78ce arm: replace cpu_arm_init() with cpu_generic_init()
it's just a wrapper, drop it and use cpu_generic_init() directly

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1503592308-93913-19-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-09-01 11:54:24 -03:00
Alistair Francis 4a2fdb78e7 target/arm: Require alignment for load exclusive
According to the ARM ARM exclusive loads require the same alignment as
exclusive stores. Let's update the memops used for the load to match
that of the store. This adds the alignment requirement to the memops.

Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20170815145714.17635-4-richard.henderson@linaro.org
[rth: Require 16-byte alignment for 64-bit LDXP.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-08-15 17:38:44 +01:00
Richard Henderson 19514cde3b target/arm: Correct load exclusive pair atomicity
We are not providing the required single-copy atomic semantics for
the 64-bit operation that is the 32-bit paired load.

At the same time, leave the entire 64-bit value in cpu_exclusive_val
and stop writing to cpu_exclusive_high.  This means that we do not
have to re-assemble the 64-bit quantity when it comes time to store.

At the same time, drop a redundant temporary and perform all loads
directly into the cpu_exclusive_* globals.

Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20170815145714.17635-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-08-15 17:38:44 +01:00
Alistair Francis 955fd0ad5d target/arm: Correct exclusive store cmpxchg memop mask
When we perform the atomic_cmpxchg operation we want to perform the
operation on a pair of 32-bit registers. Previously we were just passing
the register size in which was set to MO_32. This would result in the
high register to be ignored. To fix this issue we hardcode the size to
be 64-bits long when operating on 32-bit pairs.

Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Portia Stephens <portia.stephens@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20170815145714.17635-2-richard.henderson@linaro.org
Message-Id: <bc18dddca56e8c2ea4a3def48d33ceb5d21d1fff.1502488636.git.alistair.francis@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-08-15 16:11:22 +01:00
Vladimir Sementsov-Ogievskiy 8908eb1a4a trace-events: fix code style: print 0x before hex numbers
The only exception are groups of numers separated by symbols
'.', ' ', ':', '/', like 'ab.09.7d'.

This patch is made by the following:

> find . -name trace-events | xargs python script.py

where script.py is the following python script:
=========================
 #!/usr/bin/env python

import sys
import re
import fileinput

rhex = '%[-+ *.0-9]*(?:[hljztL]|ll|hh)?(?:x|X|"\s*PRI[xX][^"]*"?)'
rgroup = re.compile('((?:' + rhex + '[.:/ ])+' + rhex + ')')
rbad = re.compile('(?<!0x)' + rhex)

files = sys.argv[1:]

for fname in files:
    for line in fileinput.input(fname, inplace=True):
        arr = re.split(rgroup, line)
        for i in range(0, len(arr), 2):
            arr[i] = re.sub(rbad, '0x\g<0>', arr[i])

        sys.stdout.write(''.join(arr))
=========================

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20170731160135.12101-5-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-08-01 12:13:07 +01:00
Peter Maydell f1a4694078 target/arm: Migrate MPU_RNR register state for M profile cores
The PMSAv7 region number register is migrated for R profile
cores using the cpreg scheme, but M profile doesn't use
cpregs, and so we weren't migrating the MPU_RNR register state
at all. Fix that by adding a migration subsection for the
M profile case.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1501153150-19984-6-git-send-email-peter.maydell@linaro.org
2017-07-31 13:09:52 +01:00
Peter Maydell 69ceea64bf target/arm: Move PMSAv7 reset into arm_cpu_reset() so M profile MPUs get reset
When the PMSAv7 implementation was originally added it was for R profile
CPUs only, and reset was handled using the cpreg .resetfn hooks.
Unfortunately for M profile cores this doesn't work, because they do
not register any cpregs. Move the reset handling into arm_cpu_reset(),
where it will work for both R profile and M profile cores.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1501153150-19984-5-git-send-email-peter.maydell@linaro.org
2017-07-31 13:09:52 +01:00
Peter Maydell 8531eb4f61 target/arm: Rename cp15.c6_rgnr to pmsav7.rnr
Almost all of the PMSAv7 state is in the pmsav7 substruct of
the ARM CPU state structure. The exception is the region
number register, which is in cp15.c6_rgnr. This exception
is a bit odd for M profile, which otherwise generally does
not store state in the cp15 substruct.

Rename cp15.c6_rgnr to pmsav7.rnr accordingly.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1501153150-19984-4-git-send-email-peter.maydell@linaro.org
2017-07-31 13:09:52 +01:00
Peter Maydell bf446a11df target/arm: Don't allow guest to make System space executable for M profile
For an M profile v7PMSA, the system space (0xe0000000 - 0xffffffff) can
never be executable, even if the guest tries to set the MPU registers
up that way. Enforce this restriction.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1501153150-19984-3-git-send-email-peter.maydell@linaro.org
2017-07-31 13:09:18 +01:00
Peter Maydell 38aaa60ca4 target/arm: Don't do MPU lookups for addresses in M profile PPB region
The M profile PMSAv7 specification says that if the address being looked
up is in the PPB region (0xe0000000 - 0xe00fffff) then we do not use
the MPU regions but always use the default memory map. Implement this
(we were previously behaving like an R profile PMSAv7, which does not
special case this).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1501153150-19984-2-git-send-email-peter.maydell@linaro.org
2017-07-31 13:05:21 +01:00
Peter Maydell 709e4407ad target/arm: Correct MPU trace handling of write vs execute
Correct off-by-one bug in the PSMAv7 MPU tracing where it would print
a write access as "reading", an insn fetch as "writing", and a read
access as "execute".

Since we have an MMUAccessType enum now, we can make the code clearer
in the process by using that rather than the raw 0/1/2 values.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1500906792-18010-1-git-send-email-peter.maydell@linaro.org
2017-07-31 13:05:04 +01:00
Philippe Mathieu-Daudé 87e0331c5a docs: fix broken paths to docs/devel/tracing.txt
With the move of some docs/ to docs/devel/ on ac06724a71,
no references were updated.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-07-31 13:12:53 +03:00
Emilio G. Cota e4256c3cbf target/arm: fix TCG temp leak in aarch64 rev16
Fix a TCG temporary leak in the new aarch64 rev16 handling.

Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-24 17:59:28 +01:00
Lluís Vilanova 9c489ea6be tcg: Pass generic CPUState to gen_intermediate_code()
Needed to implement a target-agnostic gen_intermediate_code()
in the future.

Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Benneé <alex.benee@linaro.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-Id: <150002025498.22386.18051908483085660588.stgit@frigg.lan>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-07-19 14:45:16 -07:00
Aurelien Jarno 68cedf733a target/arm: optimize aarch32 rev16
Use the same mask to avoid having to load two different constants, as
suggested by Richard Henderson.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20170516230159.4195-2-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-07-19 14:45:15 -07:00
Richard Henderson abb1066df3 target/arm: Optimize aarch64 rev16
It is much shorter to reverse all 4 half-words in parallel
than extract, reverse, and deposit each in turn.

Suggested-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-07-19 14:45:15 -07:00
Alex Bennée b29fd33db5 target/arm: use DISAS_EXIT for eret handling
Previously DISAS_JUMP did ensure this but with the optimisation of
8a6b28c7 (optimize indirect branches) we might not leave the loop.
This means if any pending interrupts are cleared by changing IRQ flags
we might never get around to servicing them. You usually notice this
by seeing the lookup_tb_ptr() helper gainfully chaining TBs together
while cpu->interrupt_request remains high and the exit_request has not
been set.

This breaks amongst other things the OPTEE test suite which executes
an eret from the secure world after a non-secure world IRQ has gone
pending which then never gets serviced.

Instead of using the previously implied semantics of DISAS_JUMP we use
DISAS_EXIT which will always exit the run-loop.

CC: Etienne Carriere <etienne.carriere@linaro.org>
CC: Joakim Bech <joakim.bech@linaro.org>
CC: Jaroslaw Pelczar <j.pelczar@samsung.com>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Emilio G. Cota <cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 20170713141928.25419-7-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-17 13:36:07 +01:00
Alex Bennée 0b609cc128 target/arm: use gen_goto_tb for ISB handling
While an ISB will ensure any raised IRQs happen on the next
instruction it doesn't cause any to get raised by itself. We can
therefore use a simple tb exit for ISB instructions and rely on the
exit_request check at the top of each TB to deal with exiting if
needed.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 20170713141928.25419-6-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-17 13:36:07 +01:00
Alex Bennée 4cae8f56fb target/arm/translate: ensure gen_goto_tb sets exit flags
As the gen_goto_tb function can do both static and dynamic jumps it
should also set the is_jmp field. This matches the behaviour of the
a64 code.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 20170713141928.25419-5-alex.bennee@linaro.org
[tweak to multiline comment formatting]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-17 13:36:07 +01:00
Alex Bennée abd1fb0ee2 target/arm/translate.h: expand comment on DISAS_EXIT
We already have an exit condition, DISAS_UPDATE which will exit the
run-loop. Expand on the difference with DISAS_EXIT in the comments.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 20170713141928.25419-4-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-17 13:36:07 +01:00
Alex Bennée e8d5230221 target/arm/translate: make DISAS_UPDATE match declared semantics
DISAS_UPDATE should be used when the wider CPU state other than just
the PC has been updated and we should therefore exit the TCG runtime
and return to the main execution loop rather assuming DISAS_JUMP would
do that.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 20170713141928.25419-3-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-17 13:36:07 +01:00
Peter Maydell 8d92e26b45 target/arm: Make Cortex-M3 and M4 default to 8 PMSA regions
The Cortex-M3 and M4 CPUs always have 8 PMSA MPU regions (this isn't
a configurable option for the hardware).  Make the default value of
the pmsav7-dregion property be set per-cpu, so we don't need to have
every user of these CPUs set it manually.  (The existing default of
16 is correct for the other PMSAv7 core, the Cortex-R5.)

This fixes a bug where we were creating the M3 and M4 with
too many regions; most guest software would not notice or
care, though, since it would just not use the registers
associated with the unexpected extra regions.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1499788408-10096-4-git-send-email-peter.maydell@linaro.org
2017-07-17 13:36:07 +01:00
Peter Maydell 792dac309c target-arm: v7M: ignore writes to CONTROL.SPSEL from Thread mode
For v7M, writes to the CONTROL register are only permitted for
privileged code. However even if the code is privileged, the
write must not affect the SPSEL bit in the CONTROL register
if the CPU is in Thread mode (as documented in the pseudocode
for the MSR instruction). Implement this, instead of permitting
SPSEL to be written in all cases.

This was causing mbed applications not to run, because the
RTX RTOS they use relies on this behaviour.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1498820791-8130-1-git-send-email-peter.maydell@linaro.org
2017-07-11 11:21:26 +01:00
Alexander Graf 5d721b785f ARM: KVM: Enable in-kernel timers with user space gic
When running with KVM enabled, you can choose between emulating the
gic in kernel or user space. If the kernel supports in-kernel virtualization
of the interrupt controller, it will default to that. If not, if will
default to user space emulation.

Unfortunately when running in user mode gic emulation, we miss out on
interrupt events which are only available from kernel space, such as the timer.
This patch leverages the new kernel/user space pending line synchronization for
timer events. It does not handle PMU events yet.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1498577737-130264-1-git-send-email-agraf@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-11 11:21:26 +01:00
Richard Henderson 8da54b2507 target/arm: Exit after clearing aarch64 interrupt mask
Exit to cpu loop so we reevaluate cpu_arm_hw_interrupts.

Tested-by: Emilio G. Cota <cota@braap.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-19 11:11:26 -07:00
Peter Maydell a65afaae0f x86 and machine queue, 2017-06-05
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJZNam5AAoJECgHk2+YTcWmiNAP/1yGqibhujtVTviYpbHbVOBx
 wsHkeNOqb1WUXw0bfGw8RfGTlcuoBaeL7r88iwFL8G303g2OPiS1H/tcRuT7gfG0
 YV3xdpGYMDFBu1JMV2VSnCqWXfa92EbPJ0vRLjxTD/heLmekVA7TUdiZVBf+S7hK
 fQLWqzZboV7RFDm6OUBQOxjCU8/WJ7ggShQJhItzBJTIZJA2C2iiO07v+U04Cwku
 Z0eoiwXTMnjDhvKLh8AE5jO3KLCrxGT6u9u9szXMwUtQUDX14X2U5PFCAB89mhUZ
 bYW3rRvpsU9eDMQVUo92Lej0e+47T0Mb4R7F9vjWsHwTI+VgcO+K0DXlYru0uKOJ
 XLoZVtGls3nRuJIDrMsICCkuveulGZs98YlVcjGjzdfJ748P6FpEQmL9v6WiExHi
 G8lu0tP2nW4n1DU+1p4EMQcKWueKuN/p7OhCWGGFvNDeGSvm1e8//TITmbtMZ2/E
 PizmCW5YQSGPOGg7fq4C3RhLfkQj4gsESe1lHdWsgSOZd9KYmJWg256BNInroky+
 zb8XYts7/i2ogKtj8c9YV8jwvbiHjAYVcO4mr9GNFERO1FSdPbNKuVm2IldChLIt
 trI4vngvTIygTcURA7s+cOXFRAnznHrHYl+QH9XQJqI2Ay/+3nGYY+/EYFpCc0EW
 l2f/b2ZChRU/UlchdleG
 =0C6J
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/ehabkost/tags/x86-and-machine-pull-request' into staging

x86 and machine queue, 2017-06-05

# gpg: Signature made Mon 05 Jun 2017 19:58:01 BST
# gpg:                using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/x86-and-machine-pull-request:
  scripts: Test script to look for -device crashes
  qemu.py: Add QEMUMachine.exitcode() method
  qemu.py: Don't set _popen=None on error/shutdown
  spapr: cleanup spapr_fixup_cpu_numa_dt() usage
  numa: move numa_node from CPUState into target specific classes
  numa: make hmp 'info numa' fetch numa nodes from qmp_query_cpus() result
  numa: make sure that all cpus have has_node_id set if numa is enabled
  numa: move default mapping init to machine
  numa: consolidate cpu_preplug fixups/checks for pc/arm/spapr
  pc: Use "min-[x]level" on compat_props

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-06 10:00:34 +01:00
Igor Mammedov 15f8b14228 numa: move numa_node from CPUState into target specific classes
Move vcpu's associated numa_node field out of generic CPUState
into inherited classes that actually care about cpu<->numa mapping,
i.e: ARMCPU, PowerPCCPU, X86CPU.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1496161442-96665-6-git-send-email-imammedo@redhat.com>
[ehabkost: s/CPU is belonging to/CPU belongs to/ on comments]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-06-05 14:59:09 -03:00
Emilio G. Cota e75449a346 target/aarch64: optimize indirect branches
Measurements:

[Baseline performance is that before applying this and the previous commit]

-                                    NBench, aarch64-softmmu. Host: Intel i7-4790K @ 4.00GHz

 1.7x +-+--------------------------------------------------------------------------------------------------------------+-+
      |                                                                                                                  |
      |   cross                                                                                                          |
 1.6x +cross+jr.................................................####...................................................+-+
      |                                                         #++#                                                     |
      |                                                         #  #                                                     |
 1.5x +-+...................................................*****..#...................................................+-+
      |                                                     *+++*  #                                                     |
      |                                                     *   *  #                                                     |
 1.4x +-+...................................................*...*..#...................................................+-+
      |                                                     *   *  #                                                     |
      |                                     #####           *   *  #                                                     |
 1.3x +-+................................****+++#...........*...*..#...................................................+-+
      |                                  *++*   #           *   *  #                                                     |
      |                                  *  *   #           *   *  #                                                     |
 1.2x +-+................................*..*...#...........*...*..#...................................................+-+
      |                                  *  *   #           *   *  #                                                     |
      |                            ####  *  *   #           *   *  #                                                     |
 1.1x +-+.......................+++#..#..*..*...#...........*...*..#...................................................+-+
      |                         ****  #  *  *   #           *   *  #                                        ****####     |
      |                         *  *  #  *  *   #           *   *  #  ****###   +++####            ****###  *  *   #     |
   1x +-++-++++++-++++****###++-*++*++#++*++*+-+#++****+++++*+++*++#++*++*-+#++*****++#++****###-++*++*-+#++*+-*+++#+-++-+
      |     *****###  *  *  #   *  *  #  *  *   #  *++*###  *   *  #  *  *  #  *   *  #  *  *++#   *  *  #  *  *   #     |
      |     *   *++#  *  *  #   *  *  #  *  *   #  *  *  #  *   *  #  *  *  #  *   *  #  *  *  #   *  *  #  *  *   #     |
 0.9x +-+---*****###--****###---****###--****####--****###--*****###--****###--*****###--****###---****###--****####---+-+
      ASSIGNMENT BITFIELD   FOURFP EMULATION   HUFFMAN   LU DECOMPOSITIONNEURAL NUMERIC SORSTRING SORT    hmean
  png: http://imgur.com/qO9ubtk
NB. cross here represents the previous commit.

-                            SPECint06 (test set), aarch64-linux-user. Host: Intel i7-4790K @ 4.00GHz

 1.5x +-+--------------------------------------------------------------------------------------------------------------+-+
      |                                                                       *****                                      |
      |                                                                       *+++*                           jr         |
      |                                                                       *   *                                      |
 1.4x +-+.....................................................................*...*.....................+++............+-+
      |                                                                       *   *                      |               |
      |                                      *****                            *   *                      |               |
      |                                      *   *                            *   *                    *****             |
 1.3x +-+....................................*...*............................*...*....................*.|.*...........+-+
      |                       +++            *   *                            *   *                    * | *             |
      |                      *****           *   *                            *   *                    *+++*             |
      |                      *   *           *   *                            *   *                    *   *             |
 1.2x +-+....................*...*...........*...*............................*...*...........*****....*...*...........+-+
      |     *****            *   *           *   *                            *   *           *   *    *   *    +++      |
      |     *   *            *   *           *   *                            *   *           *   *    *   *   *****     |
      |     *   *            *   *   *****   *   *                            *   *           *   *    *   *   *   *     |
 1.1x +-+...*...*............*...*...*...*...*...*............................*...*....+++....*...*....*...*...*...*...+-+
      |     *   *            *   *   *   *   *   *                            *   *   *****   *   *    *   *   *   *     |
      |     *   *            *   *   *   *   *   *   *****                    *   *   *   *   *   *    *   *   *   *     |
      |     *   *   *****    *   *   *   *   *   *   *   *   ******           *   *   *   *   *   *    *   *   *   *     |
   1x +-++-+*+++*-++*+++*++++*+-+*+++*-++*+++*-++*+++*+++*++-*++++*-++*****+++*++-*+++*++-*+++*+-+*++++*+++*++-*+++*+-++-+
      |     *   *   *   *    *   *   *   *   *   *   *   *   *    *   *+++*   *   *   *   *   *   *    *   *   *   *     |
      |     *   *   *   *    *   *   *   *   *   *   *   *   *    *   *   *   *   *   *   *   *   *    *   *   *   *     |
      |     *   *   *   *    *   *   *   *   *   *   *   *   *    *   *   *   *   *   *   *   *   *    *   *   *   *     |
 0.9x +-+---*****---*****----*****---*****---*****---*****---******---*****---*****---*****---*****----*****---*****---+-+
         astar   bzip2      gcc   gobmk h264ref   hmmlibquantum      mcf omnetpperlbench   sjengxalancbmk   hmean
  png: http://imgur.com/3Dp4vvq

-                           SPECint06 (train set), aarch64-linux-user. Host: Intel i7-4790K @ 4.00GHz

 1.7x +-+--------------------------------------------------------------------------------------------------------------+-+
      |                                                                                                                  |
      |                                                                                                       jr         |
 1.6x +-+...............................................................................................+++............+-+
      |                                                                                                *****             |
      |                                                                                                *+++*             |
      |                                                                                                *   *             |
 1.5x +-+..............................................................................................*...*...........+-+
      |                                                                        +++                     *   *             |
      |                                                                       *****                    *   *             |
 1.4x +-+.....................................................................*+++*....................*...*...........+-+
      |                                                                       *   *                    *   *             |
      |                                      *****                            *   *                    *   *             |
      |                                      *   *                            *   *   *****            *   *             |
 1.3x +-+....................................*...*............................*...*...*...*............*...*...........+-+
      |                       +++            *   *                            *   *   *   *            *   *             |
      |                      *****           *   *                            *   *   *   *   *****    *   *             |
 1.2x +-+....................*...*...........*...*............................*...*...*...*...*+++*....*...*...*****...+-+
      |                      *   *           *   *                            *   *   *   *   *   *    *   *   *+++*     |
      |     *****            *   *   *****   *   *                            *   *   *   *   *   *    *   *   *   *     |
      |     *   *            *   *   *+++*   *   *                            *   *   *   *   *   *    *   *   *   *     |
 1.1x +-+...*...*............*...*...*...*...*...*............................*...*...*...*...*...*....*...*...*...*...+-+
      |     *   *   *****    *   *   *   *   *   *                    *****   *   *   *   *   *   *    *   *   *   *     |
      |     *   *   *   *    *   *   *   *   *   *    +++    ******   *+++*   *   *   *   *   *   *    *   *   *   *     |
   1x +-+---*****---*****----*****---*****---*****---*****---******---*****---*****---*****---*****----*****---*****---+-+
         astar   bzip2      gcc   gobmk h264ref   hmmlibquantum      mcf omnetpperlbench   sjengxalancbmk   hmean
  png: http://imgur.com/vRrdc9j

Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-05 09:25:42 -07:00
Emilio G. Cota e78722368c target/aarch64: optimize cross-page direct jumps in softmmu
Perf numbers in next commit's log.

Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-05 09:25:42 -07:00
Emilio G. Cota 8a6b28c7b5 target/arm: optimize indirect branches
Speed up indirect branches by jumping to the target if it is valid.

Softmmu measurements (see later commit for user-mode results):

Note: baseline (i.e. speedup == 1x) is QEMU v2.9.0.

- Impact on Boot time

| setup  | ARM debian jessie boot+shutdown time | stddev |
|--------+--------------------------------------+--------|
| v2.9.0 |                                 8.84 |   0.07 |
| +cross |                                 8.85 |   0.03 |
| +jr    |                                 8.83 |   0.06 |

-                            NBench, arm-softmmu (debian jessie guest). Host: Intel i7-4790K @ 4.00GHz

  1.3x +-+-------------------------------------------------------------------------------------------------------------+-+
       |                                                                                                                 |
       |   cross                                                          ####                                           |
 1.25x +cross+jr..........................................................#++#.........................................+-+
       |                                                        ####      #  #                                           |
       |                                                     +++#  #      #  #                                           |
       |                                      +++            ****  #      #  #                                           |
  1.2x +-+...................................####............*..*..#......#..#.........................................+-+
       |                                  ****  #            *  *  #      #  #     ####                                  |
       |                                  *  *  #            *  *  #      #  #     #  #                                  |
 1.15x +-+................................*..*..#............*..*..#......#..#.....#..#................................+-+
       |                                  *  *  #            *  *  #      #  #     #  #                                  |
       |                                  *  *  #      ####  *  *  #      #  #     #  #                                  |
       |                                  *  *  #      #  #  *  *  #      #  #     #  #                         ####     |
  1.1x +-+................................*..*..#......#..#..*..*..#......#..#.....#..#.........................#..#...+-+
       |                                  *  *  #      #  #  *  *  #      #  #     #  #                         #  #     |
       |                                  *  *  #      #  #  *  *  #      #  #     #  #                         #  #     |
 1.05x +-+..........................####..*..*..#......#..#..*..*..#......#..#.....#..#......+++............*****..#...+-+
       |                        *****  #  *  *  #      #  #  *  *  #  *****  #     #  #   +++ |    ****###  *   *  #     |
       |                        *+++*  #  *  *  #      #  #  *  *  #  *+++*  #  ****  #  *****###  *  *  #  *   *  #     |
       |     *****###  +++####  *   *  #  *  *  #  *****  #  *  *  #  *   *  #  *  *  #  * | *++#  *  *  #  *   *  #     |
    1x +-++-+*+++*-+#++****++#++*+-+*++#+-*++*++#-+*+++*-+#++*++*++#++*+-+*++#+-*++*++#-+*+++*-+#++*++*++#++*+-+*++#+-++-+
       |     *   *  #  *  *  #  *   *  #  *  *  #  *   *  #  *  *  #  *   *  #  *  *  #  *   *  #  *  *  #  *   *  #     |
       |     *   *  #  *  *  #  *   *  #  *  *  #  *   *  #  *  *  #  *   *  #  *  *  #  *   *  #  *  *  #  *   *  #     |
 0.95x +-+---*****###--****###--*****###--****###--*****###--****###--*****###--****###--*****###--****###--*****###---+-+
       ASSIGNMENT BITFIELD   FOURFP EMULATION   HUFFMAN   LU DECOMPOSITIONEURAL NNUMERIC SOSTRING SORT     hmean
  png: http://imgur.com/eOLmZNR

NB. 'cross' represents the previous commit.

Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1493263764-18657-8-git-send-email-cota@braap.org>
[rth: Replace gen_jr global variable with DISAS_EXIT state.]
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-05 09:25:42 -07:00
Emilio G. Cota 7ad55b4ffd target/arm: optimize cross-page direct jumps in softmmu
Instead of unconditionally exiting to the exec loop, use the
lookup_and_goto_ptr helper to jump to the target if it is valid.

Perf impact: see next commit's log.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1493263764-18657-7-git-send-email-cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-05 09:25:42 -07:00
Luc MICHEL 95e9a242e2 target/arm: add data cache invalidation cp15 instruction to cortex-r5
The cp15, CRn=15, opc1=0, CRm=5, opc2=0 instruction invalidates all the
data cache on the cortex-r5. Implementing it as a NOP.

Signed-off-by: Luc MICHEL <luc.michel@git.antfield.fr>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-06-04 18:42:55 +03:00
Peter Maydell 3bef701256 arm: Implement HFNMIENA support for M profile MPU
Implement HFNMIENA support for the M profile MPU. This bit controls
whether the MPU is treated as enabled when executing at execution
priorities of less than zero (in NMI, HardFault or with the FAULTMASK
bit set).

Doing this requires us to use a different MMU index for "running
at execution priority < 0", because we will have different
access permissions for that case versus the normal case.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1493122030-32191-14-git-send-email-peter.maydell@linaro.org
2017-06-02 11:51:49 +01:00
Michael Davidsaver 29c483a506 arm: add MPU support to M profile CPUs
The M series MPU is almost the same as the already implemented R
profile MPU (v7 PMSA).  So all we need to implement here is the MPU
register interface in the system register space.

This implementation has the same restriction as the R profile MPU
that it doesn't permit regions to be sized down smaller than 1K.

We also do not yet implement support for MPU_CTRL.HFNMIENA; this
bit should if zero disable use of the MPU when running HardFault,
NMI or with FAULTMASK set to 1 (ie at an execution priority of
less than zero) -- if the MPU is enabled we don't treat these
cases any differently.

Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Message-id: 1493122030-32191-13-git-send-email-peter.maydell@linaro.org
[PMM: Keep all the bits in mpu_ctrl field, rather than
 using SCTLR bits for them; drop broken HFNMIENA support;
 various cleanup]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-02 11:51:48 +01:00
Michael Davidsaver 5dd0641d23 armv7m: Classify faults as MemManage or BusFault
General logic is that operations stopped by the MPU are MemManage,
and those which go through the MPU and are caught by the unassigned
handle are BusFault. Distinguish these by looking at the
exception.fsr values, and set the CFSR bits and (if appropriate)
fill in the BFAR or MMFAR with the exception address.

Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Message-id: 1493122030-32191-12-git-send-email-peter.maydell@linaro.org
[PMM: i-side faults do not set BFAR/MMFAR, only d-side;
 added some CPU_LOG_INT logging]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-06-02 11:51:48 +01:00
Peter Maydell 790a11503c arm: All M profile cores are PMSA
All M profile CPUs are PMSA, so set the feature bit.
(We haven't actually implemented the M profile MPU register
interface yet, but setting this feature bit gives us closer
to correct behaviour for the MPU-disabled case.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1493122030-32191-11-git-send-email-peter.maydell@linaro.org
2017-06-02 11:51:48 +01:00
Michael Davidsaver 3a00d560bc armv7m: Implement M profile default memory map
Add support for the M profile default memory map which is used
if the MPU is not present or disabled.

The main differences in behaviour from implementing this
correctly are that we set the PAGE_EXEC attribute on
the right regions of memory, such that device regions
are not executable.

Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Message-id: 1493122030-32191-10-git-send-email-peter.maydell@linaro.org
[PMM: rephrased comment and commit message; don't mark
 the flash memory region as not-writable; list all
 the cases in the default map explicitly rather than
 using a 'default' case for the non-executable regions]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-02 11:51:48 +01:00
Michael Davidsaver c9f9f1246d armv7m: Improve "-d mmu" tracing for PMSAv7 MPU
Improve the "-d mmu" tracing for the PMSAv7 MPU translation
process as an aid in debugging guest MPU configurations:
 * fix a missing newline for a guest-error log
 * report the region number with guest-error or unimp
   logs of bad region register values
 * add a log message for the overall result of the lookup
 * print "0x" prefix for hex values

Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1493122030-32191-9-git-send-email-peter.maydell@linaro.org
[PMM: a little tidyup, report region number in all messages
 rather than just one]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-02 11:51:48 +01:00
Peter Maydell e9235c6983 arm: Remove unnecessary check on cpu->pmsav7_dregion
Now that we enforce both:
 * pmsav7_dregion == 0 implies has_mpu == false
 * PMSA with has_mpu == false means SCTLR.M cannot be set
we can remove a check on pmsav7_dregion from get_phys_addr_pmsav7(),
because we can only reach this code path if the MPU is enabled
(and so region_translation_disabled() returned false).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1493122030-32191-8-git-send-email-peter.maydell@linaro.org
2017-06-02 11:51:48 +01:00
Peter Maydell 06312febfb arm: Don't let no-MPU PMSA cores write to SCTLR.M
If the CPU is a PMSA config with no MPU implemented, then the
SCTLR.M bit should be RAZ/WI, so that the guest can never
turn on the non-existent MPU.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1493122030-32191-7-git-send-email-peter.maydell@linaro.org
2017-06-02 11:51:48 +01:00
Peter Maydell f50cd31413 arm: Don't clear ARM_FEATURE_PMSA for no-mpu configs
Fix the handling of QOM properties for PMSA CPUs with no MPU:

Allow no-MPU to be specified by either:
 * has-mpu = false
 * pmsav7_dregion = 0
and make setting one imply the other. Don't clear the PMSA
feature bit in this situation.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1493122030-32191-6-git-send-email-peter.maydell@linaro.org
2017-06-02 11:51:47 +01:00
Peter Maydell 452a095526 arm: Clean up handling of no-MPU PMSA CPUs
ARM CPUs come in two flavours:
 * proper MMU ("VMSA")
 * only an MPU ("PMSA")
For PMSA, the MPU may be implemented, or not (in which case there
is default "always acts the same" behaviour, but it isn't guest
programmable).

QEMU is a bit confused about how we indicate this: we have an
ARM_FEATURE_MPU, but it's not clear whether this indicates
"PMSA, not VMSA" or "PMSA and MPU present" , and sometimes we
use it for one purpose and sometimes the other.

Currently trying to implement a PMSA-without-MPU core won't
work correctly because we turn off the ARM_FEATURE_MPU bit
and then a lot of things which should still exist get
turned off too.

As the first step in cleaning this up, rename the feature
bit to ARM_FEATURE_PMSA, which indicates a PMSA CPU (with
or without MPU).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1493122030-32191-5-git-send-email-peter.maydell@linaro.org
2017-06-02 11:51:47 +01:00
Peter Maydell e7b921c2d9 arm: Use different ARMMMUIdx values for M profile
Make M profile use completely separate ARMMMUIdx values from
those that A profile CPUs use. This is a prelude to adding
support for the MPU and for v8M, which together will require
6 MMU indexes which don't map cleanly onto the A profile
uses:
 non secure User
 non secure Privileged
 non secure Privileged, execution priority < 0
 secure User
 secure Privileged
 secure Privileged, execution priority < 0

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1493122030-32191-4-git-send-email-peter.maydell@linaro.org
2017-06-02 11:51:47 +01:00
Peter Maydell 8bd5c82030 arm: Add support for M profile CPUs having different MMU index semantics
The M profile CPU's MPU has an awkward corner case which we
would like to implement with a different MMU index.

We can avoid having to bump the number of MMU modes ARM
uses, because some of our existing MMU indexes are only
used by non-M-profile CPUs, so we can borrow one.
To avoid that getting too confusing, clean up the code
to try to keep the two meanings of the index separate.

Instead of ARMMMUIdx enum values being identical to core QEMU
MMU index values, they are now the core index values with some
high bits set. Any particular CPU always uses the same high
bits (so eventually A profile cores and M profile cores will
use different bits). New functions arm_to_core_mmu_idx()
and core_to_arm_mmu_idx() convert between the two.

In general core index values are stored in 'int' types, and
ARM values are stored in ARMMMUIdx types.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1493122030-32191-3-git-send-email-peter.maydell@linaro.org
2017-06-02 11:51:47 +01:00
Peter Maydell e517d95b63 arm: Use the mmu_idx we're passed in arm_cpu_do_unaligned_access()
When identifying the DFSR format for an alignment fault, use
the mmu index that we are passed, rather than calling cpu_mmu_index()
to get the mmu index for the current CPU state. This doesn't actually
make any difference since the only cases where the current MMU index
differs from the index used for the load are the "unprivileged
load/store" instructions, and in that case the mmu index may
differ but the translation regime is the same (apart from the
"use from Hyp mode" case which is UNPREDICTABLE).
However it's the more logical thing to do.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1493122030-32191-2-git-send-email-peter.maydell@linaro.org
2017-06-02 11:51:47 +01:00
Wei Huang 2b3ffa9292 target/arm: clear PMUVER field of AA64DFR0 when vPMU=off
The PMUv3 driver of linux kernel (in arch/arm64/kernel/perf_event.c)
relies on the PMUVER field of id_aa64dfr0_el1 to decide if PMU support
is present or not. This patch clears the PMUVER field under TCG mode
when vPMU=off. Without it, PMUv3 will init insider guest VMs even
with vPMU=off. This patch also removes a redundant line inside the
if-statement.

Signed-off-by: Wei Huang <wei@redhat.com>
Message-id: 1495123889-32301-1-git-send-email-wei@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-02 11:51:47 +01:00
Eric Blake cf83f14005 shutdown: Add source information to SHUTDOWN and RESET
Time to wire up all the call sites that request a shutdown or
reset to use the enum added in the previous patch.

It would have been less churn to keep the common case with no
arguments as meaning guest-triggered, and only modified the
host-triggered code paths, via a wrapper function, but then we'd
still have to audit that I didn't miss any host-triggered spots;
changing the signature forces us to double-check that I correctly
categorized all callers.

Since command line options can change whether a guest reset request
causes an actual reset vs. a shutdown, it's easy to also add the
information to reset requests.

Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au> [ppc parts]
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> [SPARC part]
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x parts]
Message-Id: <20170515214114.15442-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-05-23 13:28:17 +02:00
Igor Mammedov bd4c1bfe3e virt-arm: add node-id property to CPU
it will allow switching from cpu_index to property based
numa mapping in follow up patches.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <1494415802-227633-5-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-05-11 16:08:49 -03:00
Igor Mammedov 46de5913b6 hw/arm/virt: extract mp-affinity calculation in separate function
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1493816238-33120-3-git-send-email-imammedo@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-05-11 16:08:48 -03:00
Peter Maydell f4e8e4edda arm: Remove workarounds for old M-profile exception return implementation
Now that we've rewritten M-profile exception return so that the magic
PC values are not visible to other parts of QEMU, we can delete the
special casing of them elsewhere.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1491844419-12485-10-git-send-email-peter.maydell@linaro.org
2017-04-20 17:39:17 +01:00
Peter Maydell 3bb8a96f53 arm: Implement M profile exception return properly
On M profile, return from exceptions happen when code in Handler mode
executes one of the following function call return instructions:
 * POP or LDM which loads the PC
 * LDR to PC
 * BX register
and the new PC value is 0xFFxxxxxx.

QEMU tries to implement this by not treating the instruction
specially but then catching the attempt to execute from the magic
address value.  This is not ideal, because:
 * there are guest visible differences from the architecturally
   specified behaviour (for instance jumping to 0xFFxxxxxx via a
   different instruction should not cause an exception return but it
   will in the QEMU implementation)
 * we have to account for it in various places (like refusing to take
   an interrupt if the PC is at a magic value, and making sure that
   the MPU doesn't deny execution at the magic value addresses)

Drop these hacks, and instead implement exception return the way the
architecture specifies -- by having the relevant instructions check
for the magic value and raise the 'do an exception return' QEMU
internal exception immediately.

The effect on the generated code is minor:

 bx lr, old code (and new code for Thread mode):
  TCG:
   mov_i32 tmp5,r14
   movi_i32 tmp6,$0xfffffffffffffffe
   and_i32 pc,tmp5,tmp6
   movi_i32 tmp6,$0x1
   and_i32 tmp5,tmp5,tmp6
   st_i32 tmp5,env,$0x218
   exit_tb $0x0
   set_label $L0
   exit_tb $0x7f2aabd61993
  x86_64 generated code:
   0x7f2aabe87019:  mov    %ebx,%ebp
   0x7f2aabe8701b:  and    $0xfffffffffffffffe,%ebp
   0x7f2aabe8701e:  mov    %ebp,0x3c(%r14)
   0x7f2aabe87022:  and    $0x1,%ebx
   0x7f2aabe87025:  mov    %ebx,0x218(%r14)
   0x7f2aabe8702c:  xor    %eax,%eax
   0x7f2aabe8702e:  jmpq   0x7f2aabe7c016

 bx lr, new code when in Handler mode:
  TCG:
   mov_i32 tmp5,r14
   movi_i32 tmp6,$0xfffffffffffffffe
   and_i32 pc,tmp5,tmp6
   movi_i32 tmp6,$0x1
   and_i32 tmp5,tmp5,tmp6
   st_i32 tmp5,env,$0x218
   movi_i32 tmp5,$0xffffffffff000000
   brcond_i32 pc,tmp5,geu,$L1
   exit_tb $0x0
   set_label $L1
   movi_i32 tmp5,$0x8
   call exception_internal,$0x0,$0,env,tmp5
  x86_64 generated code:
   0x7fe8fa1264e3:  mov    %ebp,%ebx
   0x7fe8fa1264e5:  and    $0xfffffffffffffffe,%ebx
   0x7fe8fa1264e8:  mov    %ebx,0x3c(%r14)
   0x7fe8fa1264ec:  and    $0x1,%ebp
   0x7fe8fa1264ef:  mov    %ebp,0x218(%r14)
   0x7fe8fa1264f6:  cmp    $0xff000000,%ebx
   0x7fe8fa1264fc:  jae    0x7fe8fa126509
   0x7fe8fa126502:  xor    %eax,%eax
   0x7fe8fa126504:  jmpq   0x7fe8fa122016
   0x7fe8fa126509:  mov    %r14,%rdi
   0x7fe8fa12650c:  mov    $0x8,%esi
   0x7fe8fa126511:  mov    $0x56095dbeccf5,%r10
   0x7fe8fa12651b:  callq  *%r10

which is a difference of one cmp/branch-not-taken. This will
be lost in the noise of having to exit generated code and
look up the next TB anyway.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1491844419-12485-9-git-send-email-peter.maydell@linaro.org
2017-04-20 17:39:17 +01:00
Peter Maydell 064c379c99 arm: Track M profile handler mode state in TB flags
For M profile exception-return handling we'd like to generate different
code for some instructions depending on whether we are in Handler
mode or Thread mode. This isn't the same as "are we privileged
or user", so we need an extra bit in the TB flags to distinguish.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1491844419-12485-8-git-send-email-peter.maydell@linaro.org
2017-04-20 17:39:17 +01:00
Peter Maydell b636649f5a arm: Abstract out "are we singlestepping" test to utility function
We now test for "are we singlestepping" in several places and
it's not a trivial check because we need to care about both
architectural singlestep and QEMU gdbstub singlestep. We're
also about to add another place that needs to make this check,
so pull the condition out into a function.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1491844419-12485-7-git-send-email-peter.maydell@linaro.org
2017-04-20 17:39:17 +01:00
Peter Maydell f021b2c462 arm: Move condition-failed codepath generation out of if()
Move the code to generate the "condition failed" instruction
codepath out of the if (singlestepping) {} else {}. This
will allow adding support for handling a new is_jmp type
which can't be neatly split into "singlestepping case"
versus "not singlestepping case".

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1491844419-12485-6-git-send-email-peter.maydell@linaro.org
2017-04-20 17:39:17 +01:00
Peter Maydell 4d5e8c969a arm: Move gen_set_condexec() and gen_set_pc_im() up in the file
Move the utility routines gen_set_condexec() and gen_set_pc_im()
up in the file, as we will want to use them from a function
placed earlier in the file than their current location.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1491844419-12485-5-git-send-email-peter.maydell@linaro.org
2017-04-20 17:39:17 +01:00
Peter Maydell 5425415ebb arm: Factor out "generate right kind of step exception"
We currently have two places that do:
            if (dc->ss_active) {
                gen_step_complete_exception(dc);
            } else {
                gen_exception_internal(EXCP_DEBUG);
            }

Factor this out into its own function, as we're about to add
a third place that needs the same logic.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1491844419-12485-4-git-send-email-peter.maydell@linaro.org
2017-04-20 17:39:17 +01:00
Peter Maydell bedb8a6b09 arm: Thumb shift operations should not permit interworking branches
In Thumb mode, the only instructions which can cause an interworking
branch by writing the PC are BLX, BX, BXJ, LDR, POP and LDM. Unlike
ARM mode, data processing instructions which target the PC do not
cause interworking branches.

When we added support for doing interworking branches on writes to
PC from data processing instructions in commit 21aeb3430c, we
accidentally changed a Thumb instruction to have interworking
branch behaviour for writes to PC. (MOV, MOVS register-shifted
register, encoding T2; this is the standard encoding for
LSL/LSR/ASR/ROR (register).)

For this encoding, behaviour with Rd == R15 is specified as
UNPREDICTABLE, so allowing an interworking branch is within
spec, but it's confusing and differs from our handling of this
class of UNPREDICTABLE for other Thumb ALU operations. Make
it perform a simple (non-interworking) branch like the others.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1491844419-12485-3-git-send-email-peter.maydell@linaro.org
2017-04-20 17:39:17 +01:00
Peter Maydell 9d7c59c84d arm: Don't implement BXJ on M-profile CPUs
For M-profile CPUs, the BXJ instruction does not exist at all, and
the encoding should always UNDEF. We were accidentally implementing
it to behave like A-profile BXJ; correct the error.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1491844419-12485-2-git-send-email-peter.maydell@linaro.org
2017-04-20 17:39:17 +01:00
Ishani Chugh dffc58519e arm/kvm: Remove trailing newlines from error_report()
Signed-off-by: Ishani Chugh <chugh.ishani@research.iiit.ac.in>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1491629987-6826-1-git-send-email-chugh.ishani@research.iiit.ac.in
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-20 17:39:17 +01:00
Peter Maydell 65ed2ed90d target/arm: Add assertion about FSC format for syndrome registers
In tlb_fill() we construct a syndrome register value from a
fault status register value which is filled in by arm_tlb_fill().
arm_tlb_fill() returns FSR values which might be in the format
used with short-format page descriptors, or the format used
with long-format (LPAE) descriptors. The syndrome register
always uses LPAE-format FSR status codes.

It isn't actually possible to end up delivering a syndrome
register value to the guest for a fault which is reported
with a short-format FSR (that kind of stage 1 fault will only
happen for an AArch32 translation regime which doesn't have
a syndrome register, and can never be redirected to an AArch64
or Hyp exception level). Add an assertion which checks this,
and adjust the code so that we construct a syndrome with
an invalid status code, rather than allowing set bits in
the FSR input to randomly corrupt other fields in the syndrome.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1491486152-24304-1-git-send-email-peter.maydell@linaro.org
2017-04-20 17:39:17 +01:00
Peter Maydell 2c4a7cc5af arm: Move excnames[] array into arm_log_exceptions()
The excnames[] array is defined in internals.h because we used
to use it from two different source files for handling logging
of AArch32 and AArch64 exception entry. Refactoring means that
it's now used only in arm_log_exception() in helper.c, so move
the array into that function.

Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1491821097-5647-1-git-send-email-peter.maydell@linaro.org
2017-04-20 17:39:17 +01:00
Peter Maydell 32b81e620e target/arm: Add missing entries to excnames[] for log strings
Recent changes have added new EXCP_ values to ARM but forgot
to update the excnames[] array which is used to provide
human-readable strings when printing information about the
exception for debug logging. Add the missing entries, and
add a comment to the list of #defines to help avoid the mistake
being repeated in future.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1491486340-25988-1-git-send-email-peter.maydell@linaro.org
2017-04-20 17:39:17 +01:00
Peter Maydell b28b3377d7 arm: Fix APSR writes via M profile MSR
Our implementation of writes to the APSR for M-profile via the MSR
instruction was badly broken.

First and worst, we had the sense wrong on the test of bit 2 of the
SYSm field -- this is supposed to request an APSR write if bit 2 is 0
but we were doing it if bit 2 was 1.  This bug was introduced in
commit 58117c9bb4, so hasn't been in a QEMU release.

Secondly, the choice of exactly which parts of APSR should be written
is defined by bits in the 'mask' field.  We were not passing these
through from instruction decode, making it impossible to check them
in the helper.

Pass the mask bits through from the instruction decode to the helper
function and process them appropriately; fix the wrong sense of the
SYSm bit 2 check.

Invalid mask values and invalid combinations of mask and register
number are UNPREDICTABLE; we choose to treat them as if the mask
values were valid.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1487616072-9226-5-git-send-email-peter.maydell@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2017-03-20 12:41:44 +00:00
Peter Maydell 3d54026fb0 arm: Enforce should-be-1 bits in MRS decoding
The MRS instruction requires that bits [19..16] are all 1s, and for
A/R profile also that bits [7..0] are all 0s.  At this point in the
decode tree we have checked all of the rest of the instruction but
were allowing these to be any value.  If these bits are not set then
the result is architecturally UNPREDICTABLE, but choosing to UNDEF is
more helpful to the user and avoids unexpected odd behaviour if the
encodings are used for some purpose in future architecture versions.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1487616072-9226-4-git-send-email-peter.maydell@linaro.org
2017-03-20 12:41:44 +00:00
Peter Maydell 43ac657423 arm: Don't decode MRS(banked) or MSR(banked) for M profile
M profile doesn't have the MSR(banked) and MRS(banked) instructions
and uses the encodings for different kinds of M-profile MRS/MSR.
Guard the relevant bits of the decode logic to make sure we don't
accidentally fall into them by accident on M-profile.

(The bit being checked for this (bit 5) is part of the SYSm field on
M-profile, but since no currently allocated system registers have
encodings with bit 5 of SYSm set, this hasn't been a problem in
practice.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1487616072-9226-3-git-send-email-peter.maydell@linaro.org
2017-03-20 12:41:44 +00:00
Peter Maydell 001b3cab51 arm: HVC and SMC encodings don't exist for M profile
M profile doesn't have the HVC or SMC encodings, so make them always
UNDEF rather than generating calls to helper functions that assume
A/R profile.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1487616072-9226-2-git-send-email-peter.maydell@linaro.org
2017-03-20 12:41:44 +00:00
Andrew Jones d5affb0d86 target/arm/arm-powerctl: Fix psci info return values
The power state spec section 5.1.5 AFFINITY_INFO defines the
affinity info return values as

  0 ON
  1 OFF
  2 ON_PENDING

I grepped QEMU for power_state to ensure that no assumptions
of OFF=0 were being made.

Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20170303123232.4967-1-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-03-14 11:28:54 +00:00
Andrew Baumann 6ecd0b6ba0 target/arm: implement armv8 PMUSERENR (user-mode enable bits)
In armv8, this register implements more than a single bit, with
fine-grained enables for read access to event counters, cycles
counters, and write access to the software increment. This change
implements those checks using custom access functions for the relevant
registers.

Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 20170228215801.10472-2-Andrew.Baumann@microsoft.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: move a couple of access functions to be only compiled
 ifndef CONFIG_USER_ONLY to avoid compiler warnings]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-03-14 11:28:54 +00:00
Alex Bennée 6568da459b target/arm/helper: make it clear the EC field is also in hex
..just like the rest of the displayed ESR register. Otherwise people
might scratch their heads if a not obviously hex number is displayed
for the EC field.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-03-09 10:41:48 +00:00
Paolo Bonzini 2ae41db262 KVM: do not use sigtimedwait to catch SIGBUS
Call kvm_on_sigbus_vcpu asynchronously from the VCPU thread.
Information for the SIGBUS can be stored in thread-local variables
and processed later in kvm_cpu_exec.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-03 16:40:02 +01:00
Paolo Bonzini 4d39892cca KVM: remove kvm_arch_on_sigbus
Build it on kvm_arch_on_sigbus_vcpu instead.  They do the same
for "action optional" SIGBUSes, and the main thread should never get
"action required" SIGBUSes because it blocks the signal.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-03 16:40:02 +01:00
Vijaya Kumar K d3a3e52962 target-arm: Add GICv3CPUState in CPUARMState struct
Add gicv3state void pointer to CPUARMState struct
to store GICv3CPUState.

In case of usecase like CPU reset, we need to reset
GICv3CPUState of the CPU. In such scenario, this pointer
becomes handy.

Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1487850673-26455-5-git-send-email-vijay.kilari@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-28 17:10:00 +00:00
Peter Maydell e13886e3a7 armv7m: Raise correct kind of UsageFault for attempts to execute ARM code
M profile doesn't implement ARM, and the architecturally required
behaviour for attempts to execute with the Thumb bit clear is to
generate a UsageFault with the CFSR INVSTATE bit set.  We were
incorrectly implementing this as generating an UNDEFINSTR UsageFault;
fix this.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2017-02-28 12:08:19 +00:00
Peter Maydell aa488fe3bb armv7m: Check exception return consistency
Implement the exception return consistency checks
described in the v7M pseudocode ExceptionReturn().

Inspired by a patch from Michael Davidsaver's series, but
this is a reimplementation from scratch based on the
ARM ARM pseudocode.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2017-02-28 12:08:19 +00:00
Peter Maydell 39ae2474e3 armv7m: Extract "exception taken" code into functions
Extract the code from the tail end of arm_v7m_do_interrupt() which
enters the exception handler into a pair of utility functions
v7m_exception_taken() and v7m_push_stack(), which correspond roughly
to the pseudocode PushStack() and ExceptionTaken().

This also requires us to move the arm_v7m_load_vector() utility
routine up so we can call it.

Handling illegal exception returns has some cases where we want to
take a UsageFault either on an existing stack frame or with a new
stack frame but with a specific LR value, so we want to be able to
call these without having to go via arm_v7m_cpu_do_interrupt().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2017-02-28 12:08:18 +00:00
Michael Davidsaver a25dc805e2 armv7m: Simpler and faster exception start
All the places in armv7m_cpu_do_interrupt() which pend an
exception in the NVIC are doing so for synchronous
exceptions. We know that we will always take some
exception in this case, so we can just acknowledge it
immediately, rather than returning and then immediately
being called again because the NVIC has raised its outbound
IRQ line.

Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
[PMM: tweaked commit message; added DEBUG to the set of
exceptions we handle immediately, since it is synchronous
when it results from the BKPT instruction]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2017-02-28 12:08:18 +00:00
Peter Maydell a5d8235545 armv7m: Remove unused armv7m_nvic_acknowledge_irq() return value
Having armv7m_nvic_acknowledge_irq() return the new value of
env->v7m.exception and its one caller assign the return value
back to env->v7m.exception is pointless. Just make the return
type void instead.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2017-02-28 12:08:18 +00:00
Michael Davidsaver a73c98e159 armv7m: Escalate exceptions to HardFault if necessary
The v7M exception architecture requires that if a synchronous
exception cannot be taken immediately (because it is disabled
or at too low a priority) then it should be escalated to
HardFault (and the HardFault exception is then taken).
Implement this escalation logic.

Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
[PMM: extracted from another patch]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2017-02-28 12:08:17 +00:00
Peter Maydell 7ecdaa4a96 armv7m: Fix condition check for taking exceptions
The M profile condition for when we can take a pending exception or
interrupt is not the same as that for A/R profile.  The code
originally copied from the A/R profile version of the
cpu_exec_interrupt function only worked by chance for the
very simple case of exceptions being masked by PRIMASK.
Replace it with a call to a function in the NVIC code that
correctly compares the priority of the pending exception
against the current execution priority of the CPU.

[Michael Davidsaver's patchset had a patch to do something
similar but the implementation ended up being a rewrite.]

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2017-02-28 12:08:17 +00:00
Nick Reilly a4f5c5b723 Add missing fp_access_check() to aarch64 crypto instructions
The aarch64 crypto instructions for AES and SHA are missing the
check for if the FPU is enabled.

Signed-off-by: Nick Reilly <nreilly@blackberry.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-28 12:08:15 +00:00
Alex Bennée ca759f9e38 tcg: enable MTTCG by default for ARM on x86 hosts
This enables the multi-threaded system emulation by default for ARMv7
and ARMv8 guests using the x86_64 TCG backend. This is because on the
guest side:

  - The ARM translate.c/translate-64.c have been converted to
    - use MTTCG safe atomic primitives
    - emit the appropriate barrier ops
  - The ARM machine has been updated to
    - hold the BQL when modifying shared cross-vCPU state
    - defer powerctl changes to async safe work

All the host backends support the barrier and atomic primitives but
need to provide same-or-better support for normal load/store
operations.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
2017-02-24 10:32:46 +00:00
Alex Bennée a67cf27727 target-arm: ensure all cross vCPUs TLB flushes complete
Previously flushes on other vCPUs would only get serviced when they
exited their TranslationBlocks. While this isn't overly problematic it
violates the semantics of TLB flush from the point of view of source
vCPU.

To solve this we call the cputlb *_all_cpus_synced() functions to do
the flushes which ensures all flushes are completed by the time the
vCPU next schedules its own work. As the TLB instructions are modelled
as CP writes the TB ends at this point meaning cpu->exit_request will
be checked before the next instruction is executed.

Deferring the work until the architectural sync point is a possible
future optimisation.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-24 10:32:46 +00:00
Alex Bennée c22edfebff target-arm: don't generate WFE/YIELD calls for MTTCG
The WFE and YIELD instructions are really only hints and in TCG's case
they were useful to move the scheduling on from one vCPU to the next. In
the parallel context (MTTCG) this just causes an unnecessary cpu_exit
and contention of the BQL.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-24 10:32:46 +00:00
Alex Bennée 062ba099e0 target-arm/powerctl: defer cpu reset work to CPU context
When switching a new vCPU on we want to complete a bunch of the setup
work before we start scheduling the vCPU thread. To do this cleanly we
defer vCPU setup to async work which will run the vCPUs execution
context as the thread is woken up. The scheduling of the work will kick
the vCPU awake.

This avoids potential races in MTTCG system emulation.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-24 10:32:46 +00:00
Alex Bennée 0336cbf853 cputlb and arm/sparc targets: convert mmuidx flushes from varg to bitmap
While the vargs approach was flexible the original MTTCG ended up
having munge the bits to a bitmap so the data could be used in
deferred work helpers. Instead of hiding that in cputlb we push the
change to the API to make it take a bitmap of MMU indexes instead.

For ARM some the resulting flushes end up being quite long so to aid
readability I've tended to move the index shifting to a new line so
all the bits being or-ed together line up nicely, for example:

    tlb_flush_page_by_mmuidx(other_cs, pageaddr,
                             (1 << ARMMMUIdx_S1SE1) |
                             (1 << ARMMMUIdx_S1SE0));

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
[AT: SPARC parts only]
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
[PM: ARM parts only]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-24 10:32:46 +00:00
Jan Kiszka 8d04fb55de tcg: drop global lock during TCG code execution
This finally allows TCG to benefit from the iothread introduction: Drop
the global mutex while running pure TCG CPU code. Reacquire the lock
when entering MMIO or PIO emulation, or when leaving the TCG loop.

We have to revert a few optimization for the current TCG threading
model, namely kicking the TCG thread in qemu_mutex_lock_iothread and not
kicking it in qemu_cpu_kick. We also need to disable RAM block
reordering until we have a more efficient locking mechanism at hand.

Still, a Linux x86 UP guest and my Musicpal ARM model boot fine here.
These numbers demonstrate where we gain something:

20338 jan       20   0  331m  75m 6904 R   99  0.9   0:50.95 qemu-system-arm
20337 jan       20   0  331m  75m 6904 S   20  0.9   0:26.50 qemu-system-arm

The guest CPU was fully loaded, but the iothread could still run mostly
independent on a second core. Without the patch we don't get beyond

32206 jan       20   0  330m  73m 7036 R   82  0.9   1:06.00 qemu-system-arm
32204 jan       20   0  330m  73m 7036 S   21  0.9   0:17.03 qemu-system-arm

We don't benefit significantly, though, when the guest is not fully
loading a host CPU.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-Id: <1439220437-23957-10-git-send-email-fred.konrad@greensocs.com>
[FK: Rebase, fix qemu_devices_reset deadlock, rm address_space_* mutex]
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
[EGC: fixed iothread lock for cpu-exec IRQ handling]
Signed-off-by: Emilio G. Cota <cota@braap.org>
[AJB: -smp single-threaded fix, clean commit msg, BQL fixes]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
[PM: target-arm changes]
Acked-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-24 10:32:45 +00:00
Wei Huang d6f02ce3b8 target-arm: Enable vPMU support under TCG mode
This patch contains several fixes to enable vPMU under TCG mode. It
first removes the checking of kvm_enabled() while unsetting
ARM_FEATURE_PMU. With it, the .pmu option can be used to turn on/off vPMU
under TCG mode. Secondly the PMU node of DT table is now created under TCG.
The last fix is to disable the masking of PMUver field of ID_AA64DFR0_EL1.

Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1486504171-26807-5-git-send-email-wei@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-10 17:40:28 +00:00
Wei Huang e6ec54571e target-arm: Add support for PMU register PMINTENSET_EL1
This patch adds access support for PMINTENSET_EL1.

Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1486504171-26807-4-git-send-email-wei@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-10 17:40:28 +00:00
Wei Huang fdb8665672 target-arm: Add support for AArch64 PMU register PMXEVTYPER_EL0
In order to support Linux perf, which uses PMXEVTYPER register,
this patch adds read/write access support for PMXEVTYPER. The access
is CONSTRAINED UNPREDICTABLE when PMSELR is not 0x1f. Additionally
this patch adds support for PMXEVTYPER_EL0.

Signed-off-by: Wei Huang <wei@redhat.com>
Message-id: 1486504171-26807-3-git-send-email-wei@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-10 17:40:28 +00:00
Wei Huang 6b0407805d target-arm: Add support for PMU register PMSELR_EL0
This patch adds support for AArch64 register PMSELR_EL0. The existing
PMSELR definition is revised accordingly.

Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: Moved #ifndef CONFIG_USER_ONLY to cover new regdefs]
Message-id: 1486504171-26807-2-git-send-email-wei@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-10 17:40:28 +00:00
Peter Maydell 9bb6558a21 target/arm: A32, T32: Create Instruction Syndromes for Data Aborts
Add support for generating the ISS (Instruction Specific Syndrome)
for Data Abort exceptions taken from AArch32. These syndromes are
used by hypervisors for example to trap and emulate memory accesses.

This is the equivalent for AArch32 guests of the work done for AArch64
guests in commit aaa1f954d4.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2017-02-07 18:30:00 +00:00
Peter Maydell 63f26fcfda target/arm: Abstract out pbit/wbit tests in ARM ldr/str decode
In the ARM ldr/str decode path, rather than directly testing
"insn & (1 << 21)" and "insn & (1 << 24)", abstract these
bits out into wbit and pbit local flags. (We will want to
do more tests against them to determine whether we need to
provide syndrome information.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2017-02-07 18:29:59 +00:00
Julian Brown 4061200059 arm: Correctly handle watchpoints for BE32 CPUs
In BE32 mode, sub-word size watchpoints can fail to trigger because the
address of the access is adjusted in the opcode helpers before being
compared with the watchpoint registers.  This patch reverses the address
adjustment before performing the comparison with the help of a new CPUClass
hook.

This version of the patch augments and tidies up comments a little.

Signed-off-by: Julian Brown <julian@codesourcery.com>
Message-id: caaf64ffc72f6ae183015337b7afdbd4b8989cb6.1484929304.git.julian@codesourcery.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-07 18:29:59 +00:00
Julian Brown f7478a92dd Fix Thumb-1 BE32 execution and disassembly.
Thumb-1 code has some issues in BE32 mode (as currently implemented). In
short, since bytes are swapped within words at load time for BE32
executables, this also swaps pairs of adjacent Thumb-1 instructions.

This patch un-swaps those pairs of instructions again, both for execution,
and for disassembly. (The previous version of the patch always read four
bytes in arm_read_memory_func and then extracted the proper two bytes,
in a probably misguided attempt to match the behaviour of actual hardware
as described by e.g. the ARM9TDMI TRM, section 3.3 "Endian effects for
instruction fetches". It's less complicated to just read the correct
two bytes though.)

Signed-off-by: Julian Brown <julian@codesourcery.com>
Message-id: ca20462a044848000370318a8bd41dd0a4ed273f.1484929304.git.julian@codesourcery.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-07 18:29:59 +00:00
Julian Brown 3a062d5730 target/arm: Add cfgend parameter for ARM CPU selection.
Add a new "cfgend" property which selects whether the CPU resets into
big-endian mode or not.  This setting affects whether we reset with
SCTLR_B (ARMv6 and earlier) or SCTLR_EE (ARMv7 and later) set.

Signed-off-by: Julian Brown <julian@codesourcery.com>
Message-id: 11420d1c49636c1790e60578ee996e51f0f0b835.1484929304.git.julian@codesourcery.com
[PMM: use error_report_err() rather than error_report();
 move the integratorcp changes to their own patch;
 drop an unnecessary extra #include;
 rephrase commit message accordingly;
 move setting of reset_sctlr above registration of cpregs
 so it actually has an effect]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-07 18:29:59 +00:00
Michael S. Tsirkin 1b28762a33 arm: add trailing ; after MISMATCH_CHECK
Macro calls without a trailing ; look weird in C, this works as a side
effect of how QEMU_BUILD_BUG_ON is implemented. Fix this up.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-01 03:37:18 +02:00
Michael S. Tsirkin 705ae59fec arm: better stub version for MISMATCH_CHECK
stub version of MISMATCH_CHECK is empty so it's easy to misuse for
people not building kvm on arm.  Use QEMU_BUILD_BUG_ON similar to the
non-stub version to make it easier to catch bugs.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-01 03:37:18 +02:00
Peter Maydell 056f43df91 armv7m: R14 should reset to 0xffffffff
For M profile (unlike A profile) the reset value of R14 is specified
as 0xffffffff.  (The rationale is that this is an illegal exception
return value, so if guest code tries to return to it it will result
in a helpful exception.)

Registers r0 to r12 and the flags are architecturally UNKNOWN on
reset, so we leave those at zero.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1485285380-10565-11-git-send-email-peter.maydell@linaro.org
2017-01-27 15:29:08 +00:00
Michael Davidsaver dc7abe4d65 armv7m: FAULTMASK should be 0 on reset
For M profile CPUs, FAULTMASK should be 0 on reset, like PRIMASK.
QEMU stores FAULTMASK in the PSTATE F bit, so (as with PRIMASK in the
I bit) we have to clear these to undo the A profile default of 1.

Update the comment accordingly and move it so that it's closer to the
code it's referring to.

Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1485285380-10565-10-git-send-email-peter.maydell@linaro.org
[PMM: rewrote commit message, moved comments]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-27 15:29:08 +00:00
Peter Maydell 7517748e3f armv7m: Report no-coprocessor faults correctly
For v7M attempts to access a nonexistent coprocessor are reported
differently from plain undefined instructions (as UsageFaults of type
NOCP rather than type UNDEFINSTR).  Split them out into a new
EXCP_NOCP so we can report the FSR value correctly.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1485285380-10565-8-git-send-email-peter.maydell@linaro.org
2017-01-27 15:29:08 +00:00
Michael Davidsaver 81dd9648c6 armv7m: set CFSR.UNDEFINSTR on undefined instructions
When we take an exception for an undefined instruction, set the
appropriate CFSR bit.

Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1485285380-10565-7-git-send-email-peter.maydell@linaro.org
[PMM: tweaked commit message, comment]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-27 15:29:08 +00:00
Michael Davidsaver dc858c6633 armv7m: honour CCR.STACKALIGN on exception entry
The CCR.STACKALIGN bit controls whether the CPU is supposed to force
8-alignment of the stack pointer on entry to the exception handler.

Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Message-id: 1485285380-10565-6-git-send-email-peter.maydell@linaro.org
[PMM: commit message and comment tweaks]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-27 15:29:08 +00:00
Peter Maydell 2c4da50d94 armv7m: add state for v7M CCR, CFSR, HFSR, DFSR, MMFAR, BFAR
Add the structure fields, VMState fields, reset code and macros for
the v7M system control registers CCR, CFSR, HFSR, DFSR, MMFAR and
BFAR.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1485285380-10565-4-git-send-email-peter.maydell@linaro.org
2017-01-27 15:29:08 +00:00
Peter Maydell 531c60a97a target/arm: Drop IS_M() macro
We only use the IS_M() macro in two places, and it's a bit of a
namespace grab to put in cpu.h.  Drop it in favour of just explicitly
calling arm_feature() in the places where it was used.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1485285380-10565-2-git-send-email-peter.maydell@linaro.org
2017-01-27 15:29:08 +00:00
Michael Davidsaver a20ee60055 armv7m: Clear FAULTMASK on return from non-NMI exceptions
FAULTMASK must be cleared on return from all
exceptions other than NMI.

Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1484937883-1068-7-git-send-email-peter.maydell@linaro.org
2017-01-27 15:20:22 +00:00
Michael Davidsaver abc24d86cc armv7m: Fix reads of CONTROL register bit 1
The v7m CONTROL register bit 1 is SPSEL, which indicates
the stack being used. We were storing this information
not in v7m.control but in the separate v7m.other_sp
structure field. Unfortunately, the code handling reads
of the CONTROL register didn't take account of this, and
so if SPSEL was updated by an exception entry or exit then
a subsequent guest read of CONTROL would get the wrong value.

Using a separate structure field doesn't really gain us
anything in efficiency, so drop this unnecessary complexity
in favour of simply storing all the bits in v7m.control.

This is a migration compatibility break for M profile
CPUs only.

Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1484937883-1068-6-git-send-email-peter.maydell@linaro.org
[PMM: rewrote commit message;
 use deposit32(); use FIELD to define constants for
 masking and shifting of CONTROL register fields
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-27 15:20:21 +00:00
Michael Davidsaver 1b9ea408fc armv7m: Explicit error for bad vector table
Give an explicit error and abort when a load
from the vector table fails. Architecturally this
should HardFault (which will then immediately
fail to load the HardFault vector and go into Lockup).
Since we don't model Lockup, just report this guest
error via cpu_abort(). This is more helpful than the
previous behaviour of reading a zero, which is the
address of the reset stack pointer and not a sensible
location to jump to.

Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1484937883-1068-4-git-send-email-peter.maydell@linaro.org
[PMM: expanded commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-27 15:20:21 +00:00
Michael Davidsaver 542b3478a0 armv7m: Replace armv7m.hack with unassigned_access handler
For v7m we need to catch attempts to execute from special
addresses at 0xfffffff0 and above. Previously we did this
with the aid of a hacky special purpose lump of memory
in the address space and a check in translate.c for whether
we were translating code at those addresses.

We can implement this more cleanly using a CPU
unassigned access handler which throws the exception
if the unassigned access is for one of the special addresses.

Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1484937883-1068-3-git-send-email-peter.maydell@linaro.org
[PMM:
 * drop the deletion of the "don't interrupt if PC is magic"
   code in arm_v7m_cpu_exec_interrupt() -- this is still
   required
 * don't generate an exception for unassigned accesses
   which aren't to the magic address -- although doing
   this is in theory correct in practice it will break
   currently working guests which rely on the RAZ/WI
   behaviour when they touch devices which we haven't
   modelled.
 * trigger EXCP_EXCEPTION_EXIT on is_exec, not !is_write
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-27 15:20:21 +00:00
Michael Davidsaver 58117c9bb4 armv7m: MRS/MSR: handle unprivileged access
The MRS and MSR instruction handling has a number of flaws:
 * unprivileged accesses should only be able to read
   CONTROL and the xPSR subfields, and only write APSR
   (others RAZ/WI)
 * privileged access should not be able to write xPSR
   subfields other than APSR
 * accesses to unimplemented registers should log as
   guest errors, not abort QEMU

Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1484937883-1068-2-git-send-email-peter.maydell@linaro.org
[PMM: rewrote commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-27 15:20:20 +00:00
Jianjun Duan 2c21ee769e migration: extend VMStateInfo
Current migration code cannot handle some data structures such as
QTAILQ in qemu/queue.h. Here we extend the signatures of put/get
in VMStateInfo so that customized handling is supported. put now
will return int type.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

Signed-off-by: Jianjun Duan <duanj@linux.vnet.ibm.com>
Message-Id: <1484852453-12728-2-git-send-email-duanj@linux.vnet.ibm.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-01-24 17:54:47 +00:00
Peter Maydell 598cf1c805 * QOM interface fix (Eduardo)
* RTC fixes (Gaohuai, Igor)
 * Memory leak fixes (Li Qiang, me)
 * Ctrl-a b regression (Marc-André)
 * Stubs cleanups and fixes (Leif, me)
 * hxtool tweak (me)
 * HAX support (Vincent)
 * QemuThread, exec.c and SCSI fixes (Roman, Xinhua, me)
 * PC_COMPAT_2_8 fix (Marcelo)
 * stronger bitmap assertions (Peter)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQExBAABCAAbBQJYggc9FBxwYm9uemluaUByZWRoYXQuY29tAAoJEL/70l94x66D
 5pMH/092iVHw1la8VmphQd8W7hkCHckvVbwaEJ+n4BP8MjeUNmYFJX+op9Qlpqfe
 ekYqQgK69v2UwuofVK2gqS+Y2EyFHivTESk5pS3SM3lTewV1fzCM/HVG3pTxV/ol
 V+eBnp+shrfNG3Eg7YThTqx4LkDUp24Pd3HJVblQZMVpqGzL2xUuUQzSf8F/eeQJ
 xO61pm0ovpCY5MCg3kPLx8GIkPAmcXo5jhMCTz5aLnQW6TO/mwx271a4UE2RTLZ7
 cFjNhxdGSzlnn2RwId4HVYWGU42taW6mpa8NX1hVVUXa1A2qlAfi5N/WLaH0aGYR
 J5ZTIaXdPUBx2SrUmd8udj4a818=
 =H5BQ
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* QOM interface fix (Eduardo)
* RTC fixes (Gaohuai, Igor)
* Memory leak fixes (Li Qiang, me)
* Ctrl-a b regression (Marc-André)
* Stubs cleanups and fixes (Leif, me)
* hxtool tweak (me)
* HAX support (Vincent)
* QemuThread, exec.c and SCSI fixes (Roman, Xinhua, me)
* PC_COMPAT_2_8 fix (Marcelo)
* stronger bitmap assertions (Peter)

# gpg: Signature made Fri 20 Jan 2017 12:49:01 GMT
# gpg:                using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (35 commits)
  pc.h: move x-mach-use-reliable-get-clock compat entry to PC_COMPAT_2_8
  bitmap: assert that start and nr are non negative
  Revert "win32: don't run subprocess tests on Mingw32 platform"
  hax: add Darwin support
  Plumb the HAXM-based hardware acceleration support
  target/i386: Add Intel HAX files
  kvm: move cpu synchronization code
  KVM: PPC: eliminate unnecessary duplicate constants
  ramblock-notifier: new
  char: fix ctrl-a b not working
  exec: Add missing rcu_read_unlock
  x86: ioapic: fix fail migration when irqchip=split
  x86: ioapic: dump version for "info ioapic"
  x86: ioapic: add traces for ioapic
  hxtool: emit Texinfo headings as @subsection
  qemu-thread: fix qemu_thread_set_name() race in qemu_thread_create()
  serial: fix memory leak in serial exit
  scsi-block: fix direction of BYTCHK test for VERIFY commands
  pc: fix crash in rtc_set_memory() if initial cpu is marked as hotplugged
  acpi: filter based on CONFIG_ACPI_X86 rather than TARGET
  ...

# Conflicts:
#	include/hw/i386/pc.h
2017-01-20 16:42:07 +00:00
Peter Maydell c25bd18a04 target-arm: Enable EL2 feature bit on A53 and A57
Enable the ARM_FEATURE_EL2 bit on Cortex-A52 and
Cortex-A57, since this is all now sufficiently implemented
to work with the GICv3. We provide the usual CPU property
to disable it for backwards compatibility with the older
virt boards.

In this commit, we disable the EL2 feature on the
virt and ZynpMP boards, so there is no overall effect.
Another commit will expose a board-level property to
allow the user to enable EL2.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1483977924-14522-18-git-send-email-peter.maydell@linaro.org
2017-01-20 11:15:10 +00:00
Peter Maydell 3f591a2022 target/arm/psci.c: If EL2 implemented, start CPUs in EL2
The PSCI spec states that a CPU_ON call should cause the new
CPU to be started in the highest implemented Non-secure
exception level. We were incorrectly starting it at the
exception level of the caller, which happens to be correct
if EL2 is not implemented. Implement the correct logic
as described in the PSCI 1.0 spec section 6.4:
 * if EL2 exists and SCR_EL3.HCE is set: start in EL2
 * otherwise start in EL1

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Message-id: 1483977924-14522-17-git-send-email-peter.maydell@linaro.org
2017-01-20 11:15:10 +00:00
Peter Maydell e45868a3f3 target-arm: Add ARMCPU fields for GIC CPU i/f config
Add fields to the ARMCPU structure to allow CPU classes to
specify the configurable aspects of their GIC CPU interface.
In particular, the virtualization support allows different
values for number of list registers, priority bits and
preemption bits.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1483977924-14522-6-git-send-email-peter.maydell@linaro.org
2017-01-20 11:15:09 +00:00
Peter Maydell aa1b3111b3 target-arm: Expose output GPIO line for VCPU maintenance interrupt
The GICv3 support for virtualization includes an outbound
maintenance interrupt signal which is asserted when the
CPU interface wants to signal to the hypervisor that it
needs attention. Expose this as an outbound GPIO line from
the CPU object which can be wired up as a physical interrupt
line by the board code (as we do already for the CPU timers).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1483977924-14522-4-git-send-email-peter.maydell@linaro.org
2017-01-20 11:15:09 +00:00
Peter Maydell 4d2ec4da1c target/arm: Implement DBGVCR32_EL2 system register
The DBGVCR_EL2 system register is needed to run a 32-bit
EL1 guest under a Linux EL2 64-bit hypervisor. Its only
purpose is to provide AArch64 with access to the state of
the DBGVCR AArch32 register. Since we only have a dummy
DBGVCR, implement a corresponding dummy DBGVCR32_EL2.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2017-01-20 11:15:07 +00:00
Peter Maydell 87a4b27034 target/arm: Handle VIRQ and VFIQ in arm_cpu_do_interrupt_aarch32()
To run a VM in 32-bit EL1 our AArch32 interrupt handling code
needs to be able to cope with VIRQ and VFIQ exceptions.
These behave like IRQ and FIQ except that we don't need to try
to route them to Monitor mode.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2017-01-20 11:15:07 +00:00
Vincent Palatin b39466269b kvm: move cpu synchronization code
Move the generic cpu_synchronize_ functions to the common hw_accel.h header,
in order to prepare for the addition of a second hardware accelerator.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Message-Id: <f5c3cffe8d520011df1c2e5437bb814989b48332.1484045952.git.vpalatin@chromium.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-19 22:07:46 +01:00
Peter Maydell a8c611e113 This is the same as the v3 posted except a re-base and a few extra signoffs
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJYeOOmAAoJEPvQ2wlanipE3ZUH/Rsfpl23kXCMmqoXEIhWXy+h
 yf8ARWCmpU6UKfwb+sH4vLegBfU56f62vVkGQ6oaaAbuyQ4SxCUlZGMO/rqY8/TE
 m57aM+VfEE+bIdinAtLjFM24EVp/exMfkeutK7ItzLv7GwlrBos0J5veyCuyJ15q
 pccV24jrpbJGilEeJ2GblKp3r2I3dInQGauOQhtoP3MNjHmYNSQD7noSbdN/JiTR
 9H2eV700pg3ZPaSfO+CTVQN+cHjK1FC6qLi6916YZY9llnSOnDAegBYgbwE1RIBw
 AULpWrezYveKy71eFhHVtGxnPeCJ8J4GVECMK0P0cdxzprIXFh1kZezyM4bxAGk=
 =sboI
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stsquad/tags/pull-tcg-common-tlb-reset-20170113-r1' into staging

This is the same as the v3 posted except a re-base and a few extra signoffs

# gpg: Signature made Fri 13 Jan 2017 14:26:46 GMT
# gpg:                using RSA key 0xFBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>"
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8  DF35 FBD0 DB09 5A9E 2A44

* remotes/stsquad/tags/pull-tcg-common-tlb-reset-20170113-r1:
  cputlb: drop flush_global flag from tlb_flush
  cpu_common_reset: wrap TCG specific code in tcg_enabled()
  qom/cpu: move tlb_flush to cpu_common_reset

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-16 18:23:02 +00:00
Richard Henderson 86c9ab2776 target/arm: Fix ubfx et al for aarch64
The patch in 59a71b4c5b suffered from a merge failure
when compared to the original patch in

  http://lists.nongnu.org/archive/html/qemu-devel/2016-12/msg00137.html

Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-13 09:48:20 -08:00
Peter Maydell b6af8ea602 x86 and machine queue, 2017-01-17
Includes i386, CPU, NUMA, and memory backends changes.
 
 i386:
  target/i386: Fix bad patch application to translate.c
 
 CPU:
  qmp: Report QOM type name on query-cpu-definitions
 
 NUMA:
  numa: make -numa parser dynamically allocate CPUs masks
 
 Memory backends:
  qom: remove unused header
  monitor: reuse user_creatable_add_opts() instead of user_creatable_add()
  monitor: fix qmp/hmp query-memdev not reporting IDs of memory backends
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJYd8KHAAoJECgHk2+YTcWmHL4QALOeGD9hts4xw+1Q/kIzZYKt
 4fDdhGxyZ5faOiSUL8F2bOMXcOCsH+oNgvapxyKsZw1z79VbdEHgSUJtgv89Dz58
 sZ6UA1YAg2cWVaKFbRm98qGOImHmPEyNS/C7EpkejB41TXWAXM6Oh4PYeYgaibi3
 HxHW+oi7/4ugAs0dnIihaE/kMQmO4qWTtuDGosTPkTl4XuwWeMbC2BXaYIyZKAS5
 F2MgEXbxph889PcsNMeE5xy5hw3CA34gpq+Xs+ai+Box7AjIGemZVgqHdYcSjMSI
 pmaLO8R1ciyzPfjgwojOkVzFIft1A5XyoAiWUTmR0o3KQLs0gmG7XkKpjId2UzTk
 Xl2mxQjWAxZNlbfOoNYRf6UhwAIjpKYrjYyr0nrrumXB+9YH1d/0ix+3UjtZLU+e
 Qgg+sSgv11MPpdc9t1gcvXVzB+h+eqp7WLYH3j5vdYJZwLVVJJusXJxmyy72BrdK
 2AdL14RziPYvVvlQZ4fM5wp1HtTMUe96VLhHxwOpBDcdcdZIk1E8SxZXde1fUk41
 OS+egry27xgoJ6pJMZlB8t4TKqcSj8x5dNLi9+qjtfDSRonPAROCBus4jugUd6Ds
 xeW06s7Hbm0BxGYn/3s860RPTJrJPX3+MjLtFbIdXSbwHWM6jsy4U9qQdLRlneR9
 oTCyWo0AeuDFe0bQ110m
 =KII3
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/ehabkost/tags/x86-and-machine-pull-request' into staging

x86 and machine queue, 2017-01-17

Includes i386, CPU, NUMA, and memory backends changes.

i386:
 target/i386: Fix bad patch application to translate.c

CPU:
 qmp: Report QOM type name on query-cpu-definitions

NUMA:
 numa: make -numa parser dynamically allocate CPUs masks

Memory backends:
 qom: remove unused header
 monitor: reuse user_creatable_add_opts() instead of user_creatable_add()
 monitor: fix qmp/hmp query-memdev not reporting IDs of memory backends

# gpg: Signature made Thu 12 Jan 2017 17:53:11 GMT
# gpg:                using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/x86-and-machine-pull-request:
  qmp: Report QOM type name on query-cpu-definitions
  numa: make -numa parser dynamically allocate CPUs masks
  target/i386: Fix bad patch application to translate.c
  monitor: fix qmp/hmp query-memdev not reporting IDs of memory backends
  monitor: reuse user_creatable_add_opts() instead of user_creatable_add()
  qom: remove unused header

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-13 14:38:21 +00:00
Alex Bennée d10eb08f5d cputlb: drop flush_global flag from tlb_flush
We have never has the concept of global TLB entries which would avoid
the flush so we never actually use this flag. Drop it and make clear
that tlb_flush is the sledge-hammer it has always been.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
[DG: ppc portions]
Acked-by: David Gibson <david@gibson.dropbear.id.au>
2017-01-13 14:24:37 +00:00
Alex Bennée 1f5c00cfdb qom/cpu: move tlb_flush to cpu_common_reset
It is a common thing amongst the various cpu reset functions want to
flush the SoftMMU's TLB entries. This is done either by calling
tlb_flush directly or by way of a general memset of the CPU
structure (sometimes both).

This moves the tlb_flush call to the common reset function and
additionally ensures it is only done for the CONFIG_SOFTMMU case and
when tcg is enabled.

In some target cases we add an empty end_of_reset_fields structure to the
target vCPU structure so have a clear end point for any memset which
is resetting value in the structure before CPU_COMMON (where the TLB
structures are).

While this is a nice clean-up in general it is also a precursor for
changes coming to cputlb for MTTCG where the clearing of entries
can't be done arbitrarily across vCPUs. Currently the cpu_reset
function is usually called from the context of another vCPU as the
architectural power up sequence is run. By using the cputlb API
functions we can ensure the right behaviour in the future.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2017-01-13 14:24:31 +00:00
Eduardo Habkost 8ed877b784 qmp: Report QOM type name on query-cpu-definitions
The new typename attribute on query-cpu-definitions will be used
to help management software use device-list-properties to check
which properties can be set using -cpu or -global for the CPU
model.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1479320499-29818-1-git-send-email-ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-12 15:51:36 -02:00
Richard Henderson bc21dbcc12 target-arm: Use clrsb helper
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10 08:47:48 -08:00
Richard Henderson 7539a012f6 target-arm: Use clz opcode
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10 08:06:11 -08:00
Richard Henderson 59a71b4c5b target-arm: Use new deposit and extract ops
Use the new primitives for UBFX and SBFX.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10 08:06:10 -08:00
Cédric Le Goater 91db4642f8 target-arm: Add VBAR support to ARM1176 CPUs
ARM1176 CPUs have TrustZone support and can use the Vector Base
Address Register, but currently, qemu only adds VBAR support to ARMv7
CPUs. Fix this by adding a new feature ARM_FEATURE_VBAR which can used
for ARMv7 and ARM1176 CPUs.

The VBAR feature is always set for ARMv7 because some legacy boards
require it even if this is not architecturally correct.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 1481810970-9692-1-git-send-email-clg@kaod.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-27 14:59:30 +00:00
Peter Maydell c9b61d9aa1 target-arm: Log AArch64 exception returns
We already log exception entry; add logging of the AArch64 exception
return path as well.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-12-27 14:59:25 +00:00
Richard Henderson 0a97c40f8e target-arm: Fix aarch64 disas_ldst_single_struct
We add s->be_data within do_vec_ld/st.  Adding it here means that
we have the wrong bits set in SIZE for a big-endian host, leading
to g_assert_not_reached in write_vec_element and read_vec_element.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1481085020-2614-3-git-send-email-rth@twiddle.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-27 14:59:24 +00:00
Richard Henderson 416d72b97b target-arm: Fix aarch64 vec_reg_offset
Since CPUARMState.vfp.regs is not 16 byte aligned, the ^ 8 fixup used
for a big-endian host doesn't do what's intended.  Fix this by adding
in the vfp.regs offset after computing the inter-register offset.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1481085020-2614-2-git-send-email-rth@twiddle.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-27 14:59:24 +00:00
Julian Brown 0f1944735b Correct value of ARM Cortex-A8 MVFR1 register.
The value of the MVFR1 (Media and VFP Feature Register 1) register for
the Cortex-A8 appears to be incorrect (according to the TRM, DDI0344K),
with the "full denormal arithmetic" and "propagation of NaN" fields
holding both 0 instead of both 1.

I had a go tracing the history of the use of this value, and it seems
it's always just been wrong in QEMU: maybe it was derived from early
documentation, or guessed based on the use of a "VFP Lite" implementation
in the Cortex-A8.

Depending on the startup/early-boot code in use, this can manifest as
failure to perform denormal arithmetic properly: in our case, selecting
a Cortex-A8 CPU when using QEMU as an instruction-set simulator for
bare-metal GCC testing caused tests using denormal arithmetic to
fail. Problems might be masked (or not occur) when using a full OS kernel
with suitable trap handlers (I'm not sure).

Signed-off-by: Julian Brown <julian@codesourcery.com>
Message-id: 1481130858-31767-1-git-send-email-julian@codesourcery.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-27 14:59:23 +00:00
Thomas Huth fcf5ef2ab5 Move target-* CPU file into a target/ folder
We've currently got 18 architectures in QEMU, and thus 18 target-xxx
folders in the root folder of the QEMU source tree. More architectures
(e.g. RISC-V, AVR) are likely to be included soon, too, so the main
folder of the QEMU sources slowly gets quite overcrowded with the
target-xxx folders.
To disburden the main folder a little bit, let's move the target-xxx
folders into a dedicated target/ folder, so that target-xxx/ simply
becomes target/xxx/ instead.

Acked-by: Laurent Vivier <laurent@vivier.eu> [m68k part]
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> [tricore part]
Acked-by: Michael Walle <michael@walle.cc> [lm32 part]
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x part]
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [s390x part]
Acked-by: Eduardo Habkost <ehabkost@redhat.com> [i386 part]
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> [sparc part]
Acked-by: Richard Henderson <rth@twiddle.net> [alpha part]
Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa part]
Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ppc part]
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [cris&microblaze part]
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32 part]
Signed-off-by: Thomas Huth <thuth@redhat.com>
2016-12-20 21:52:12 +01:00