Commit Graph

368 Commits

Author SHA1 Message Date
Markus Armbruster f51074cdc6 pci-hotplug-old: Has been dead for five major releases, bury
Commit 79ca616 (v1.6.0) accidentally disabled legacy x86-only HMP
commands pci_add, pci_del: it defined CONFIG_PCI_HOTPLUG only as make
variable, not as preprocessor macro, killing the code conditional on
defined(CONFIG_PCI_HOTPLUG_OLD).

In all this time, nobody reported the loss.  I only noticed it when I
tried to test some error reporting change that forced me to touch this
old crap again.

Fun: git-log hw/pci/pci-hotplug-old.c shows our faith in the backward
compatibility god has been strong enough to sacrifice at its altar
about a dozen times, but not strong enough to even once verify the
legacy feature's still there, let alone works.

Remove the commands along with the code backing them.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-03-01 12:37:54 +01:00
David Gibson 8af738b3ee Give ivshmem its own config option
Currently the ivshmem device is built whenever both PCI and KVM support are
included.  This patch gives it its own config option to allow easier
customization of whether to include it.  It's enabled by default in the
same circumstances as now - when both PCI and KVM are available.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-Id: <1425017077-18487-4-git-send-email-david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-02-27 15:17:46 +01:00
David Gibson 2296594257 Create specific config option for "platform-bus"
Currently the "platform-bus" device is included for all softmmu builds.
This bridge is intended for use on any platforms that require dynamic
creation of sysbus devices.  However, at present it is used only for the
PPC E500 target, with plans for the ARM "virt" target in the immediate
future.

To avoid a not-very-useful entry appearing in "qemu -device ?" output on
other targets, this patch makes a specific config option for platform-bus
and enables it (for now) only on ppc configurations which include E500
and on ARM (which always includes the "virt" target).

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <1425017077-18487-3-git-send-email-david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-02-27 15:17:42 +01:00
David Gibson 4681867544 Add specific config options for PCI-E bridges
The i82801b11, ioh3420 and xio3130 PCI Express devices are currently
included in the build unconditionally.

While they could theoretically appear on any target platform with PCI-E,
they're pretty unlikely to appear on platforms that aren't Intel derived.

Therefore, to avoid presenting unlikely-to-be-relevant devices to the user,
add config options to enable these components, and enable them by default
only on x86 and arm platforms.

(Note that this patch does include these for aarch64, via its inclusion of
arm-softmmu.mak).

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-Id: <1425017077-18487-2-git-send-email-david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-02-27 15:17:35 +01:00
David Gibson c3cf77cb63 Make sysbus EHCI devices ARM only by default
A number of ARM embedded boards include EHCI USB host controllers which
appear as directly mapped devices, rather than sitting on a PCI bus.

At present code to emulate such devices is included whenever EHCI support
is included.  This patch adjusts teh config options to only include them
in builds targetting ARM by default.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-02-18 10:53:10 +01:00
Alexander Graf 332261de2b pci: Move PCI VGA to pci.mak
Every platform that supports PCI can also spawn the Bochs VGA PCI adapter. Move
it to pci.mak to enable it for everyone.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-13 05:46:08 +00:00
Alexander Graf 4ab29b8214 arm: Add PCIe host bridge in virt machine
Now that we have a working "generic" PCIe host bridge driver, we can plug
it into ARM's virt machine to always have PCIe available to normal ARM VMs.

I've successfully managed to expose a Bochs VGA device, XHCI and an e1000
into an AArch64 VM with this and they all lived happily ever after.

Signed-off-by: Alexander Graf <agraf@suse.de>
Tested-by: Claudio Fontana <claudio.fontana@huawei.com>
[PMM: Squashed in fix for off-by-one error in bus-range DT property
 from Laszlo Ersek <lersek@redhat.com>]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-13 05:46:08 +00:00
Jiri Slaby b30934cb52 hw: misc, add educational driver
I am using qemu for teaching the Linux kernel at our university. I
wrote a simple PCI device that can answer to writes/reads, generate
interrupts and perform DMA. As I am dragging it locally over 2 years,
I am sending it to you now.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
[Fix 32-bit compilation. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-26 12:26:55 +01:00
Frank Blaschka 8cba80c3a0 s390: Add PCI bus support
This patch implements a pci bus for s390x together with infrastructure
to generate and handle hotplug events, to configure/unconfigure via
sclp instruction, to do iommu translations and provide s390 support for
MSI/MSI-X notification processing.

Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-01-12 10:14:04 +01:00
Kevin O'Connor 224d10ff5a sdhci: Support SDHCI devices on PCI
Support for PCI devices following the "SD Host Controller Simplified
Specification Version 2.00" spec.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-15 17:34:44 +01:00
Maciej W. Rozycki dff4021730 mips: Remove CONFIG_VT82C686 from non-Fulong configs
Fix the regression introduced with commit
47934d0aad [hw: move ISA bridges and
devices to hw/isa/, configure with default-configs/], by removing
CONFIG_VT82C686 from configurations that previously did not enable it.
That southbridge is only available on Fulong platforms (CONFIG_FULONG)
that are exclusively little-endian, 64-bit MIPS.  Previously vt82c686.o
was pulled explicitly with obj-$(CONFIG_FULONG).

Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-11-07 11:15:49 +00:00
Alexander Graf 4a761ffa37 PPC: Fix default config ordering and add eTSEC for ppc64
We messed up the ordering in our default configs for PPC. The top entries
are generic entries, then come sections that indicate that features are only
in because of a special feature (such as PReP).

Fix the ordering again and while at it add eTSEC support to the ppc64 target
so that we can spawn eTSEC adapters with qemu-system-ppc64.

Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08 12:50:54 +02:00
Bastian Koppelmann 0aaeb118b3 target-tricore: Add initialization for translation and activate target
Add tcg and cpu model initialization.
Add gen_intermediate_code function.
Activate target in configure and add softmmu config.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-id: 1409572800-4116-5-git-send-email-kbastian@mail.uni-paderborn.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-01 14:49:20 +01:00
Vasilis Liaskovitis 10b7e74bf2 pc: implement pc-dimm device abstraction
Each hotplug-able memory slot is a PCDIMMDevice.
A hot-add operation for a memory device:
- creates a new PCDIMMDevice and makes hotplug controller to map it into
  guest address space

Hotplug operations are done through normal device_add commands.
For migration case, all hotplugged memory devices on source should be
specified on target's command line using '-device' option with
properties set to the same values as on source.

To simplify review, patch introduces only PCDIMMDevice QOM skeleton that
will be extended by following patches to implement actual memory hotplug
and related functions.

Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:47 +03:00
Doug Kwan 9c35126c56 target-ppc: Add a new user mode target for little-endian PPC64.
Signed-off-by: Doug Kwan <dougkwan@google.com>
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:40 +02:00
Tom Musta e58f8d1ff9 target-ppc: Enable Building of libdecnumber
Enable compilation of the newly added libdecnumber library code.
Object file targets are added to Makefile.target using a newly
introduced flag CONFIG_LIBDECNUMBER.  The flag is added
to the PowerPC targets (ppc[64]-linux-user, ppc[64]-softmmu).

Signed-off-by: Tom Musta <tommusta@gmail.com>
[agraf: add ppcemb and ppc64abi32 config]
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:29 +02:00
Cornelia Huck 7b35d0c44c s390x: split flic into kvm and non-kvm parts
Introduce a common parent class for both cases, where kvm and non-kvm
can hook up callbacks. This will be used by follow-on patches for
adapter registration and mapping.

We now always have a flic, regardless of whether we use kvm; the
non-kvm implementation just doesn't do anything.

Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-05-20 13:05:57 +02:00
Gerd Hoffmann 840a178c94 usb: mtp filesharing
Implementation of a USB Media Transfer Device device for easy
filesharing.  Read-only.  No access control inside qemu, it will
happily export any file it is able to open to the guest, i.e.
standard unix access rights for the qemu process apply.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-04-23 10:28:14 +02:00
Fabien Chouteau eb1e7c3e51 Add Enhanced Three-Speed Ethernet Controller (eTSEC)
This implementation doesn't include ring priority, TCP/IP Off-Load, QoS.

Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05 03:06:45 +01:00
Peter Maydell c2cb92f9ea Several features, fixes and cleanups for kvm/s390:
- sclp event facility: cleanup structure. This allows to use
   realize/unrealize   as well as migration support via vmsd
 - reboot: Two fixes that make reboot much more reliable
 - ipl: make elf loading more robust
 - flic interrupt controller: This allows to migrate floating
   interrupts, as well as clear them on reset etc.
 - enable async_pf feature of KVM on s390
 - several sclp fixes and cleanups
 - several sigp fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJTDwZVAAoJEBF7vIC1phx8lx4P/Rv+UVD9XDFFF8yHuye1am40
 NpRGjdarQ/9QUkS4gqyKwYUvIjAClk5id7U2d5zrfdc8XC49AH0ZhVFMdRupaOon
 AUqXjOXD5zAh9bfUcewg1EK1P1VuKcp0hyh0jFlIqk9Xmidw8N5guQ6iBoTqGJD5
 UYTp0PuSqIjY1RCuF4fCTCurzRd1+J2oKcQBip7BSWlVuWZlg2/hPxoIraLezlz2
 huwOU9tkSGXwSRv4C6fCcukEwlqnvkE6W0MCrHrcb2T8xYwAR2Jjs0TsscbKxb+t
 lIjZRiCxBrFwOLUqGN8DMYtZPffR+cigZ5bYb4o3PPJ0DQL4vLQVd8SPMPrdJhbb
 M7UOaeTclSTQuzmM/Uuc1pmrFc8PDq0dg50dT3weH2bW8aSgyqutYGpmUcm1Q6kq
 JLFuyswOBr1vS9o0TlBunP4+TqJJrnGvtIQ4EbRZm7zP78mBaIIrUcAZlbgOI+XI
 cSjtFXkBOCz0j28J9GSHrsWMC7RQ179TGdcH/FjDpu0dNDOxH7eH5gZPQoQDAqwC
 SjstqJdIFnd0qxOB1EqcgMUxbSqQYq3hoGvJ644ZrMA3T5trBn0fSw3J9ZU/qAK7
 EvOKRacMfcacIj4l0aEQgpwqVmktwIYnkfetX/QAKw/4AImJz/R9GRkmYgjCfOH8
 /CUfXM71zWLEdv1o5uJ5
 =toIt
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/borntraeger/tags/kvm-s390-20140227' into staging

Several features, fixes and cleanups for kvm/s390:

- sclp event facility: cleanup structure. This allows to use
  realize/unrealize   as well as migration support via vmsd
- reboot: Two fixes that make reboot much more reliable
- ipl: make elf loading more robust
- flic interrupt controller: This allows to migrate floating
  interrupts, as well as clear them on reset etc.
- enable async_pf feature of KVM on s390
- several sclp fixes and cleanups
- several sigp fixes and cleanups

* remotes/borntraeger/tags/kvm-s390-20140227: (22 commits)
  s390x/ipl: Fix crash of ELF images with arbitrary entry points
  s390x/kvm: Rework priv instruction handlers
  s390x/kvm: Add missing SIGP CPU RESET order
  s390x/kvm: Rework SIGP INITIAL CPU RESET handler
  s390x/cpu: Use ioctl to reset state in the kernel
  s390-ccw.img: new binary rom to match latest fixes
  s390-ccw.img: Fix sporadic errors with ccw boot image - initialize css
  s390-ccw.img: Fix sporadic reboot hangs: Initialize next_idx
  s390x/event-facility: exploit realize/unrealize
  s390x/event-facility: add support for live migration
  s390x/event-facility: code restructure
  s390x/event-facility: some renaming
  s390x/sclp: Fixed setting of condition code register
  s390x/sclp: Add missing checks to SCLP handler
  s390x/sclp: Fixed the size of sccb and code parameter
  s390x/eventfacility: mask out commands
  s390x/virtio-hcall: Specification exception for illegal subcodes
  s390x/virtio-hcall: Add range check for hypervisor call
  s390x/kvm: Fixed bad SIGP SET-ARCHITECTURE handler
  s390x/async_pf: Check for apf extension and enable pfault
  ...

Conflicts:
	linux-headers/linux/kvm.h

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-04 14:50:46 +00:00
Mark Cave-Ayland 9eb08a435a sun4m: Add Sun CG3 framebuffer and corresponding OpenBIOS FCode ROM
The CG3 framebuffer is a simple 8-bit framebuffer for use with operating
systems such as early Solaris that do not have drivers for TCX.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Blue Swirl <blauwirbel@gmail.com>
CC: Anthony Liguori <aliguori@amazon.com>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Bob Breuer <breuerr@mc.net>
CC: Artyom Tarasenko <atar4qemu@gmail.com>
2014-02-27 10:01:41 +00:00
Jens Freimann 3a553fc658 s390x/kvm: implement floating-interrupt controller device
This patch implements a floating-interrupt controller device (flic)
which interacts with the s390 flic kvm_device.

Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-02-27 09:51:25 +01:00
Andreas Färber aaab89a68e ppcemb-softmmu: Drop Mac and e500 emulation
They are still available in ppc-softmmu and ppc64-softmmu.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-13 17:47:43 +01:00
Peter Maydell f673e70ccc PReP machine and devices
* Cleanups for Raven PCI host bridge
 * Removal of PReP machine and devices from qemu-system-ppcemb
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJS+Pv3AAoJEPou0S0+fgE/3/EQAKK/J1xVXGv1BCrtrBjct1qt
 ygmZyE3cpjqWGUMvVQG2ReMlPBcwpskEKXjcAJgPtoGF9Ia/RVjccZLalMRL1EcB
 Kiz+iMqjBq8u+mPBBDTZ+ByvtrJpJtvrQng6s+3cATvCzkFVX0TniJJ4mW2PO7CP
 cf4U8NxYTsQNM5kNlbbbB1f2xsem7P00SYusWrra1Lnp9Wzh5fywi4E3cPd/HeQ5
 yrKsHVCP8fbtqI1tR7cCAh5udYK6J+TJKc2AY/g0QYBcIHxBXPo4otIS5Iv4BJJP
 Tp9CvW3KIzw+zpuHTgBEIwv1iywftdjl9XBj5X0LSn0PRQpmkV3rYNOAIAPFg+7X
 86PN1bexme35/aBMXHUuqdRhGosYIFyloC2igscgNfRfkO8FStCX/uf2JzjI+6qY
 IwlkSKHTxPd237pY9fJjdzao+8Nb54UaaK7O5tpUTE8EjGegYsanT4RWiTSpsPYo
 kUiX2rTxahhokXxZ+pLlTlUJT9e3eTw9TYVktvp+r8LpvJET9QmSoyoW7wcNWMet
 VOtCYDltT3EMQzpiwfnTCwWf72WZeX2rS2XNsddulxV0hRDvqHY57mlsyZW7YHpM
 g6WAdMaLzq3xCM9+GDF2GLKfSmQORp5cmke4ldY1/qvbrSn3DahSN7BPA+vMpR3b
 v5ph5fqwiYbch4ofgW1F
 =nxnv
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/afaerber/tags/prep-for-upstream' into staging

PReP machine and devices

* Cleanups for Raven PCI host bridge
* Removal of PReP machine and devices from qemu-system-ppcemb

# gpg: Signature made Mon 10 Feb 2014 16:19:03 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg:                 aka "Andreas Färber <afaerber@suse.com>"

* remotes/afaerber/tags/prep-for-upstream:
  prep: Drop from ppcemb-softmmu
  raven: Use constant PCI_NUM_PINS instead of 4
  prep: Kill get_system_io() usage

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-13 14:52:06 +00:00
Andreas Färber ea81ce06a4 prep: Drop from ppcemb-softmmu
ppcemb covers only embedded processors, which does not include PReP.

Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2014-02-10 17:06:26 +01:00
Beniamino Galvani 22f90bcb2b hw/net: add support for Allwinner EMAC Fast Ethernet controller
This patch adds support for the Fast Ethernet MAC found on Allwinner
SoCs, together with a basic emulation of Realtek RTL8201CP PHY.

Since there is no public documentation of the Allwinner controller, the
implementation is based on Linux kernel driver.

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-08 14:50:48 +00:00
Peter Maydell 13a7f79dfe default-configs: Add config for aarch64-linux-user
Add a config for aarch64-linux-user, thereby enabling it as
a valid target.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-01-08 19:07:21 +00:00
liguang 9158fa5451 hw/arm: add allwinner a10 SoC support
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1387159292-10436-5-git-send-email-lig.fnst@cn.fujitsu.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17 20:12:51 +00:00
liguang c3931ee8b4 hw/intc: add allwinner A10 interrupt controller
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1387159292-10436-4-git-send-email-lig.fnst@cn.fujitsu.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17 20:12:51 +00:00
liguang 3589de8c97 hw/timer: add allwinner a10 timer
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1387159292-10436-3-git-send-email-lig.fnst@cn.fujitsu.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17 20:12:51 +00:00
Antony Pavlov c6f09eb4a0 hw/arm: add very initial support for Canon DIGIC SoC
DIGIC is Canon Inc.'s name for a family of SoC
for digital cameras and camcorders.

There is no publicly available specification for
DIGIC chips. All information about DIGIC chip
internals is based on reverse engineering efforts
made by CHDK (http://chdk.wikia.com) and
Magic Lantern (http://www.magiclantern.fm) projects
contributors.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1387188908-754-2-git-send-email-antonynpavlov@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17 20:12:51 +00:00
Peter Maydell 013424d436 default-configs: Add config for aarch64-softmmu
Add a config for aarch64-softmmu; this enables building of this target.
The resulting executable doesn't know about any 64 bit CPUs, but all
the 32 bit CPUs and board models work.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1385645602-18662-8-git-send-email-peter.maydell@linaro.org
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
2013-12-17 19:42:31 +00:00
Peter Crosthwaite c21c3b53e1 hw/timer: Introduce ARM A9 Global Timer.
The ARM A9 MPCore has a timer that is global to all cores in the cluster.
The timer is shared but each core has a private independent comparator
and interrupt.

Based on version contributed by Francois LEGAL.

Signed-off-by: François LEGAL <devel@thom.fr.eu.org>
Message-id: 4918e89476b8da916be2964ec41578b50d569a37.1385969450.git.peter.crosthwaite@xilinx.com
[PC changes:
 * New commit message
 * Re-implemented as single timer model
 * Fixed backwards counting issue in polled mode
 * completed VMSD fields
 * macroified magic numbers (and headerified reg definitions)
 * split of as device-model-only patch
 * use bitops for 64 bit register access
 * Fixed auto increment mode to check condition properly
 * general cleanup (names/style etc).
]
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
[PMM:
 * minor typo fixes
 * added missing return after error_setg()
 * dropped setting dc->no_user = 1
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10 13:24:51 +00:00
Andreas Färber 53cb9a1c2f arm11mpcore: Split off SCU device
Inspired by a9scu.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-11-05 17:47:30 +01:00
Anthony Liguori 1ba1905abd Merge remote-tracking branch 'agraf/ppc-for-upstream' into staging
* agraf/ppc-for-upstream: (29 commits)
  spapr: Use DeviceClass::fw_name for device tree CPU node
  target-ppc: Fill in OpenFirmware names for some PowerPCCPU families
  target-ppc: dump-guest-memory support
  dump-guest-memory: Check for the correct return value
  target-ppc: Use #define for max slb entries
  target-ppc: Check for error on address translation in memsave command
  target-ppc: Update slb array with correct index values.
  spapr-pci: enable irqfd for INTx
  xics-kvm: enable irqfd for MSI
  xics: Implement H_XIRR_X
  xics: Implement H_IPOLL
  xics-kvm: Support for in-kernel XICS interrupt controller
  xics: add cpu_setup callback
  xics: split to xics and xics-common
  xics: add missing const specifiers to TypeInfo
  xics: convert init() to realize()
  xics: add pre_save/post_load dispatchers
  xics: replace fprintf with error_report
  spapr: move cpu_setup after kvmppc_set_papr
  xics: move reset and cpu_setup
  ...

Message-id: 1382736474-32128-1-git-send-email-agraf@suse.de
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-10-31 17:01:12 +01:00
Alex Bennée b86160555f integrator: fix Linux boot failure by emulating dbg region
Commit 9b8c69243 (since reverted) broke the ability to boot the kernel
as the value returned by unassigned_mem_read returned non-zero and left
the kernel looping forever waiting for it to change (see
integrator_led_set in the kernel code).

Relying on a varying implementation detail is incorrect anyway so this
introduces a basic stub of a memory region for the debug/LED section
on the integrator board.

Signed-off-by: Alex Bennée <alex@bennee.com>
Message-id: 1382451366-9539-1-git-send-email-alex.bennee@linaro.org
[PMM: removed three unused fields from struct IntegratorDebugState]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-10-31 14:00:16 +01:00
David Gibson 11ad93f681 xics-kvm: Support for in-kernel XICS interrupt controller
Recent (host) kernels support emulating the PAPR defined "XICS" interrupt
controller system within KVM.  This patch allows qemu to initialize and
configure the in-kernel XICS, and keep its state in sync with qemu's XICS
state as necessary.

This should give considerable performance improvements.  e.g. on a simple
IPI ping-pong test between hardware threads, using qemu XICS gives us
around 5,000 irqs/second, whereas the in-kernel XICS gives us around
70,000 irqs/s on the same hardware configuration.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[Mike Qiu <qiudayu@linux.vnet.ibm.com>: fixed mistype which caused ics_set_kvm_state() to fail]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-10-25 23:25:47 +02:00
Ákos Kovács b77abd95a9 default-configs/: CONFIG_GDBSTUB_XML removed
Makefile.target: Build gdbstub-xml.o only when
TARGET_XML_FILES is not empty.

Signed-off-by: Ákos Kovács <akoskovacs@gmx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-10-16 18:21:01 +02:00
Peter Maydell 66aae5e1ec default-configs: Fix A9MP and A15MP config names
When individual CONFIG_ switches for the A9MPcore and A15MPcore
devices were created, they were inadvertently given incorrect names
(CONFIG_ARM9MPCORE and CONFIG_ARM15MPCORE). These CPUs are
"Cortex-A9MP" and "Cortex-A15MP", and in particular the ARM9 is
a different (rather older) CPU than the Cortex-A9. Rename the
CONFIG_ switches to bring them into line with the source file
names and CPU names.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1376056215-26391-1-git-send-email-peter.maydell@linaro.org
2013-08-20 14:54:32 +01:00
Aurelien Jarno cc413a3935 mips_malta: do not raise exceptions when accessing invalid memory
Since commit c658b94f6e, MIPS raises
exceptions when accessing invalid memory. This is not the correct
behaviour for MIPS Malta Core LV, as the GT-64120A system controller
just ignore undecoded access. This feature is used by the Linux kernel
to probe for some devices.

Emulate the correct behaviour in QEMU by adding an empty slot covering
the entire memory space decoded by the GT-64120A.

Tested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-08-14 16:47:30 +02:00
Paolo Bonzini 6dd2a5c98a pc_sysfw: do not make it a device anymore
Move the code to hw/i386, the sole remaining property is available
as !pci_enabled.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1376069702-22330-4-git-send-email-aliguori@us.ibm.com

Rebased.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-08-12 09:31:14 -05:00
Paolo Bonzini 9c9984242c default-configs/ppc64: add all components of i82378 SuperIO chip used by prep
The device provides an ISA bus so that pseries can also run the
endianness test.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374501278-31549-24-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-25 08:12:28 -05:00
Paolo Bonzini 85d3846a39 default-configs: add SuperIO to SH4
The device provides an ISA bus to run the endianness test on.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374501278-31549-23-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-25 08:12:28 -05:00
Paolo Bonzini be6d08be25 default-configs: add test device to all machines supporting ISA
This will let these machines run an endianness test for ISA
I/O port space.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374501278-31549-22-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-25 08:12:28 -05:00
Paolo Bonzini 61fcb62862 isa_mmio: delete
It is not used anymore.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374501278-31549-15-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-25 08:12:27 -05:00
Alexey Kardashevskiy 42e5b4c988 pseries: move interrupt controllers to hw/intc/
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-11 18:51:23 +02:00
David Gibson 79ca616f29 pci: Cleanup configuration for pci-hotplug.c
pci-hotplug.c and the CONFIG_PCI_HOTPLUG variable which controls its
compilation are misnamed.  They're not about PCI hotplug in general, but
rather about the pci_add/pci_del interface which are now deprecated in
favour of the more general device_add/device_del interface.  This patch
therefore renames them to pci-hotplug-old.c and CONFIG_PCI_HOTPLUG_OLD.

CONFIG_PCI_HOTPLUG=y was listed twice in {i386,x86_64}-softmmu.make for no
particular reason, so we clean that up too.  In addition it was included in
ppc64-softmmu.mak for which the old hotplug interface was never used and is
unsuitable, so we remove that too.

Most of pci-hotplug.c was additionaly protected by #ifdef TARGET_I386.  The
small piece which wasn't is only called from the pci_add and pci_del hooks
in hmp-commands.hx, which themselves were protected by #ifdef TARGET_I386.
This patch therefore also removes the #ifdef from pci-hotplug-old.c,
and changes the ifdefs in hmp-commands.hx to use CONFIG_PCI_HOTPLUG_OLD.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-04 10:45:31 +03:00
Scott Wood d85937e683 kvm/openpic: in-kernel mpic support
Enables support for the in-kernel MPIC that thas been merged into the
KVM next branch.  This includes irqfd/KVM_IRQ_LINE support from Alex
Graf (along with some other improvements).

Note from Alex regarding kvm_irqchip_create():

  On x86, one would call kvm_irqchip_create() to initialize an
  in-kernel interrupt controller.  That function then goes ahead and
  initializes global capability variables as well as the default irq
  routing table.

  On ppc, we can't call kvm_irqchip_create() because we can have
  different types of interrupt controllers.  So we want to do all the
  things that function would do for us in the in-kernel device init
  handler.

Signed-off-by: Scott Wood <scottwood@freescale.com>
[agraf: squash in kvm_irqchip_commit_routes patch, fix non-kvm build,
        fix ppcemb]
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-01 01:11:14 +02:00
Keith Busch f3c507adcd NVMe: Initial commit for new storage interface
Initial commit for emulated Non-Volatile-Memory Express (NVMe) pci
storage device.

NVMe is an open, industry driven storage specification defining
an optimized register and command set designed to deliver the full
capabilities of non-volatile memory on PCIe SSDs. Further information
may be found on the organizations website at:

http://www.nvmexpress.org/

This commit implements the minimum from the specification to work with
existing drivers.

Cc: Keith Busch <keith.busch@gmail.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-17 17:47:59 +02:00
Peter Maydell 187f1bcb9c ppc: Remove CONFIG_FDT conditionals
Now that we know we're compiling with libfdt we can remove the
CONFIG_FDT conditionals.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 1369409217-7553-5-git-send-email-peter.maydell@linaro.org
2013-06-14 15:34:19 +01:00
Jan Kiszka 8f3b664f6c audio: Enable all cards
...or they will bitrot to death.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-id: 5181234A.6060504@web.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-03 12:04:49 -05:00
Igor Mammedov f0513d2c01 target-i386: Introduce ICC bus/device/bridge
Provides a hotpluggable bus for APIC and CPU.

* icc-bridge will serve as a parent for icc-bus and provide
  mmio mapping services to child icc-devices.
* icc-device will replace SysBusDevice as a parent of APIC
  and IOAPIC devices.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-01 13:06:06 +02:00
Hu Tao eec3d2adc9 introduce a new qom device to deal with panicked event
pvpanic device is used to send guest panic event from guest to qemu.

When guest panic happens, pvpanic device driver will write a event
number to IO port 0x505(which is the IO port occupied by pvpanic device,
by default). On receiving the event, pvpanic device will pause guest
cpu(s), and send a qmp event QEVENT_GUEST_PANICKED.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: b66077a40235b3531632a05a6ff373850afc7d2e.1366945969.git.hutao@cn.fujitsu.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-30 10:30:01 -05:00
Paolo Bonzini b3e6d591b0 audio: enable PCI audio cards for all PCI-enabled targets
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1366303444-24620-9-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-29 12:17:06 -05:00
Paolo Bonzini 98af93fde2 audio: replace audio card configuration with default-configs
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1366303444-24620-6-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-29 12:16:37 -05:00
Anthony Liguori 6165daa4c8 Merge remote-tracking branch 'bonzini/scsi-next' into staging
# By Paolo Bonzini (5) and others
# Via Paolo Bonzini
* bonzini/scsi-next:
  vhost-scsi-s390: new device supporting the tcm_vhost Linux kernel module
  vhost-scsi-ccw: new device supporting the tcm_vhost Linux kernel module
  vhost-scsi-pci: new device supporting the tcm_vhost Linux kernel module
  vhost-scsi: new device supporting the tcm_vhost Linux kernel module
  virtio: simplify Makefile conditionals
  virtio-scsi: create VirtIOSCSICommon
  vhost: Add vhost_commit callback for SeaBIOS ROM region re-mapping
  scsi: VMWare PVSCSI paravirtual device implementation
  scsi: avoid assertion failure on VERIFY command

Message-id: 1366381460-6041-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-22 08:05:05 -05:00
Anthony Liguori 5dff24beba pci: add pci test device
This adds a new device that we can use for testing PCI PIO and MMIO, with and
 without ioeventfd in different configurations.  FAST_MMIO will be added if/when
 kvm supports it.  Also included are minor cleanups in kvm APIs that it needs.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQEcBAABAgAGBQJRbIJQAAoJECgfDbjSjVRpQuoH/RfMHb6YYfsuwJKUsjCKxhdr
 695YqNsBLmh7E/+wr1dwUsKrMGSF97VSGAIPeX0u4wwP6jrORhA9iycCevXYlh/S
 O7RTcePqVEQrwnMX5rOAEWGARVzg4hAT8i4Pdza1A+gBvaO/WLZIVJfUOHBAZNL7
 2TTDymfixipErcTcxckITHfaShn9ajZgt/Yo8oVX70VqklWU+OEU/tYEXmvTC0H3
 bTuTU3vpeAlCubF0AHHZqWA9g7myrKMCxwv4LWx7gmQGXoyQesy4s5C9KMrld1On
 RovLw0REbtjB2xGjAj3g82ESK5eoi295Th/E7Fu1NJNYyDyfhxB7/cnbRa+Wpsg=
 =jvZE
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'mst/tags/for_anthony' into staging

pci: add pci test device

This adds a new device that we can use for testing PCI PIO and MMIO, with and
without ioeventfd in different configurations.  FAST_MMIO will be added if/when
kvm supports it.  Also included are minor cleanups in kvm APIs that it needs.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Mon 15 Apr 2013 05:42:24 PM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found

# By Michael S. Tsirkin
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
  pci: add pci test device
  kvm: support non datamatch ioeventfd
  kvm: support any size for pio eventfd
  kvm: remove unused APIs

Message-id: cover.1366272004.git.mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-19 08:38:05 -05:00
Dmitry Fleytman 881d588a98 scsi: VMWare PVSCSI paravirtual device implementation
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Yan Vugenfirer <yan@daynix.com>
[ Rename files to vmw_pvscsi, fix setting of hostStatus in
  pvscsi_request_cancelled - Paolo ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-19 10:44:17 +02:00
Paolo Bonzini 2b6b7099fb configure: eliminate target_libs_softmmu
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-04-18 14:12:31 +02:00
Michael S. Tsirkin 22773d6066 pci: add pci test device
This device is used for kvm unit tests,
currently it supports testing performance of ioeventfd.
Using updated kvm unittest, here's an example output:
        mmio-no-eventfd:pci-mem 8796
        mmio-wildcard-eventfd:pci-mem 3609
        mmio-datamatch-eventfd:pci-mem 3685
        portio-no-eventfd:pci-io 5287
        portio-wildcard-eventfd:pci-io 1762
        portio-datamatch-eventfd:pci-io 1777

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-04-16 01:41:53 +03:00
Paolo Bonzini 3b8acc11d3 configure: fix TPM logic
A non-native i386 or x86_64 emulator should not have TPM passthrough
support, since the TPM is only present for those hosts.

Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-15 15:16:41 +02:00
Stefan Weil 174d5d990c hw: Add lost ARM core again
Commit 0434e30afb accidentally removed
the compilation of arm11mpcore.c.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-15 15:16:30 +02:00
Hu Tao 35b2028f47 Fix failure to create q35 machine
This is a regression introduced by c0907c9e64. How to reproduce:

$ qemu-system-x86_64 -nodefaults -vnc :0 -M q35
qemu-system-x86_64: Unknown device 'q35-pcihost' for default sysbus
Aborted (core dumped)

Tested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-15 15:16:25 +02:00
Paolo Bonzini 0434e30afb hw: move ARM CPU cores to hw/cpu/, configure with default-configs/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:16 +02:00
Paolo Bonzini e28bee8ee6 hw: move other devices to hw/misc/, configure with default-configs/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:16 +02:00
Paolo Bonzini 7702e47c21 hw: move interrupt controllers to hw/intc/, configure with default-configs/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:16 +02:00
Paolo Bonzini d2c0bd8458 hw: move DMA controllers to hw/dma/, configure with default-configs/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:14 +02:00
Paolo Bonzini c0907c9e64 hw: move PCI bridges to hw/pci-* or hw/ARCH
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:14 +02:00
Paolo Bonzini 3bd884511f hw: move timer devices to hw/timer/, configure with default-configs/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:14 +02:00
Paolo Bonzini 47934d0aad hw: move ISA bridges and devices to hw/isa/, configure with default-configs/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:14 +02:00
Paolo Bonzini 9944d32001 hw: move char devices to hw/char/, configure via default-configs/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:14 +02:00
Paolo Bonzini 80b4ecc86d hw: move more files to hw/xen/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:14 +02:00
Paolo Bonzini 31e1706082 hw: move SSI controllers to hw/ssi/, configure via default-configs/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:13 +02:00
Paolo Bonzini 53ed424e09 hw: move I2C controllers to hw/i2c/, configure via default-configs/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:13 +02:00
Paolo Bonzini fc97bb5ba3 hw: move display devices to hw/display/, configure via default-configs/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:13 +02:00
Paolo Bonzini 34b8f63ea1 hw: move audio devices to hw/audio/, configure via default-configs/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:13 +02:00
Paolo Bonzini 7b2478956a hw: move block devices to hw/block/, configure via default-configs/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:13 +02:00
Paolo Bonzini d7e35d4a84 hw: move NICs to hw/net/, configure via default-configs/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:13 +02:00
Paolo Bonzini 0ddfaf7fe4 hw: move MC146818RTC to hw/timer/, configure via default-configs/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:13 +02:00
Paolo Bonzini a100107d56 hw: move watchdogs to hw/watchdog, configure via default-configs/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:13 +02:00
Paolo Bonzini ddf2bcfc63 hw: make all of hw/pci/ configurable via default-configs/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:12 +02:00
Paolo Bonzini aaa4d1df2e hw: make all of hw/usb/ configurable via default-configs/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:12 +02:00
Paolo Bonzini 9a1179dc86 hw: make all of hw/ide/ configurable via default-configs/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:12 +02:00
Paolo Bonzini 49ab747f66 hw: move target-independent files to subdirectories
This patch tackles all files that are compiled once, moving
them to subdirectories of hw/.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:12 +02:00
Paolo Bonzini ce3b494cb5 moxie: configure with default-configs file
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:11 +02:00
Dmitry Fleytman 786fd2b0f8 VMXNET3 device implementation
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Yan Vugenfirer <yan@daynix.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-25 11:13:10 +01:00
Anthony Green d15a9c2390 Add top level changes for moxie
Signed-off-by: Anthony Green <green@moxielogic.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-03-23 14:25:42 +00:00
Peter Crosthwaite 06a1cea5f6 pl330: Initial version
Device model for Primecell PL330 DMA controller.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Tested-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Reviewed-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 098aac26233d7334bed2bca4f06f539638ca6d24.1361853677.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-03-15 16:41:58 +00:00
Stefan Berger 1272ec8814 Build TPM passthrough for i386 and x86_64 targets
Build the TPM passthrough driver only for i386 and x86_64 targets
using the default-configs files for those targets with softmmu.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-8-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-12 13:40:55 -05:00
Stefan Berger ab214c2960 Build the TPM frontend code
Build the TPM frontend code that has been added so far.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-5-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-12 13:40:12 -05:00
Paolo Bonzini e4c8b28cde ppc: express FDT dependency of pSeries and e500 boards via default-configs/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01 15:01:19 +01:00
Igor Mitsyanko d7dfca0807 hw/sdhci: introduce standard SD host controller
Device model for standard SD Host Controller Interface (SDHCI) compliant with
version 2.00 of SD association specification.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28 18:23:14 +00:00
Gerd Hoffmann 6c83f81542 make usb devices configurable
Leave the core usb devices (usb hub, tablet, mouse, keyboard)
enabled unconditionally.  Make the other ones configurable.

Exceptions:
  - bluetooth: not qdevified yet, has a vl.c dependency because
    of that, thus disabling isn't as easy as not linking the
    object file.
  - smardcard: ccid-card-emulated depends on that one *and*
    CONFIG_SMARTCARD_NSS.  So it isn't a one-liner and comes
    as separate patch because of that.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-02-19 12:28:48 +01:00
Alberto Garcia 9c16fa79bf Add TEWS TPCI200 IndustryPack emulation
The TPCI200 is a PCI board that supports up to 4 IndustryPack modules.

A new bus type called 'IndustryPack' has been created so any
compatible module can be attached to this board.

Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alberto Garcia <agarcia@igalia.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-14 13:26:12 -06:00
Andreas Färber 63e3555e80 Merge branch 'master' of git://git.qemu.org/qemu into prep-up
Conflicts:
	hw/Makefile.objs
	hw/ppc_prep.c

Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2013-01-10 21:52:28 +01:00
Aurelien Jarno 0356404b0f target-sparc64: disable VGA cirrus
OpenBIOS on sparc64 only support Standard VGA and not Cirrus VGA. Don't
build Cirrus VGA support so that it can't be selected.

This fixes the breakage introduced by commit f2898771.

Reported-by: Richard Henderson <rth@twiddle.net>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-27 14:36:04 +00:00
Gerd Hoffmann 419ad67208 serial: add pci variant
So we get a hot-pluggable 16550 uart.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-22 13:26:42 -05:00
Peter A. G. Crosthwaite 82a2499011 m25p80: Initial implementation of SPI flash device
Added device model for m25p80 style SPI flash family.

Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
2012-10-10 11:13:32 +10:00
Hervé Poussineau 52a71bff60 prep: Use pc87312 device instead of collection of random ISA devices
We can't however replace the built-in IDE controller, as the one in
pc87312 is only single-channel and can use only IRQ 14. Therefore the
pc87312's IDE function gets disabled via the config property.

PReP emulation also gains a parallel port emulation this way.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
[AF: Use TYPE_PC87312 constant, add to ppc64-softmmu and to MAINTAINERS]
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2012-08-15 22:11:11 +02:00
Andreas Färber acbb090b24 prep: Include devices for ppc64 as well
Allows running qemu-system-ppc64 -M prep for consistency.

Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Acked-by: Hervé Poussineau <hpoussineau@reactos.org>
2012-08-15 22:10:41 +02:00
Andreas Färber 58f9b98f8a arm: Move some ARM devices into libhw
Avoids some unnecessary dependencies on cpu.h and prepares for
a future armeb-softmmu where most machines would not be built.

Defer touching the SoC devices since most have implicit or explicit
dependencies on the CPU.

Signed-off-by: Andreas Färber <andreas.faerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-08-13 16:13:02 +01:00
Guan Xuetao 79683f6117 unicore32-softmmu: Add ps2 support
This patch adds ps2/keyboard support, and enables CONFIG_PCKBD.

Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-11 09:37:02 +00:00
Guan Xuetao 56d07a9050 unicore32-softmmu: Add puv3 ostimer support
This patch adds puv3 ostimer support, include os timer
device simulation and ptimer support in puv3 machine.

Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-11 09:37:00 +00:00
Guan Xuetao fbbdf9838d unicore32-softmmu: Add puv3 soc/board support
This patch only add puv3 soc/board support, which introduces puv3
machine description, and specifies console type.

Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-11 09:36:59 +00:00
Guan Xuetao 4f23a1e645 unicore32-softmmu: Add unicore32-softmmu build support
This patch adds unicore32-softmmu build support, include configure,
makefile, arch_init, and all missing functions needed by softmmu.
Although all missing functions are empty, unicore32-softmmu could
be build successfully.
By 20120804: change QEMU_ARCH_UNICORE32 to 0x4000

Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-11 09:36:55 +00:00
Hervé Poussineau aebcf56fde esp: move PCI emulation to a new file esp-pci.c
sparc machines loose ability to instanciate PCI ESP SCSI adapter,
which is not a big loose as they don't have PCI bus support.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-09 18:21:47 +00:00
Paolo Bonzini e7b2f53bd2 esp: enable for all PCI machines
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-08-03 10:04:37 +02:00
Paolo Bonzini ca5481ed57 Revert "megasas: disable due to build breakage"
This reverts commit 9233685597.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-08-03 10:04:37 +02:00
Jia Liu d962783e98 target-or32: Add linux user support
Add QEMU OpenRISC linux user support.

Signed-off-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-07-27 21:13:05 +00:00
Jia Liu e67db06e9f target-or32: Add target stubs and QOM cpu
Add OpenRISC target stubs, QOM cpu and basic machine.

Signed-off-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-07-27 21:12:55 +00:00
Hervé Poussineau fabaaf1d1f esp: add AMD PCscsi emulation (PCI SCSI adapter)
The PCI version is supported in lots of Operating Systems,
and has been successfully tested on:
- MS DOS 6.22 (using DC390 driver)
- MS Windows 3.11 (using DC390 driver)
- MS Windows 98 SE (using default driver)
- MS Windows NT 3.1 (using DC390 driver)
- MS Windows NT 4.0 (using default driver)

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-07-14 10:13:29 +00:00
Anthony Liguori 9233685597 megasas: disable due to build breakage
The Buildbot has detected a new failure on builder default_i386_rhel61 while
building qemu.

Full details are available at:
 http://buildbot.b1-systems.de/qemu/builders/default_i386_rhel61/builds/304

The proper fix is non-trivial so let's disable the build by default until it's
fixed properly.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-07-09 18:16:16 -05:00
Hannes Reinecke e8f943c3bc megasas: LSI Megaraid SAS HBA emulation
This patch adds an emulation for the LSI Megaraid SAS 8708EM2 HBA.
I've tested it to work with Linux, Windows Vista, and Windows7.

Signed-off-by: Hannes Reinecke <hare@suse.de>
[ Squashed trivial changes from Andreas Faerber, rebased over IOMMU
  and QBus changes - Paolo ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-07-02 11:11:25 +02:00
Andreas Färber 07f9fd4864 xilinx_axi*: Share devices between microblaze and microblazeel
Speeds up the build.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2012-06-15 12:44:27 +02:00
Andreas Färber 9bbfbb61af hw/xilinx_*: Share Xilinx devices between ppc and microblaze
Speeds up the build.

xilinx_ethlite uses tswap32() and is thus target-dependent.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2012-06-15 12:44:26 +02:00
Andreas Färber 0adb124659 Drop darwin-user
It's been orphaned, not compiling for a long time and despite Apple's
drop of their Rosetta ppc emulation technology with Mac OS X Lion no one
has stepped up to fix it.

Testing necessary changes wrt QOM'ification thus is impossible, so we
might as well remove it completely.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2012-05-01 00:17:27 +02:00
Paolo Bonzini 7725d14679 get rid of CONFIG_VIRTIO_SCSI
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-03-19 16:35:14 +01:00
Anthony Liguori 9ef1300b1b Merge remote-tracking branch 'bonzini/virtio-scsi' into staging
* bonzini/virtio-scsi:
  scsi-block: always use scsi_generic_ops for cache != none
  scsi: fix searching for an empty id
  scsi: fix wrong return for target INQUIRY
  virtio-scsi: add migration support
  virtio-scsi: process control queue requests
  virtio-scsi: add basic SCSI bus operation
  virtio-scsi: Add basic request processing infrastructure
  virtio-scsi: Add virtio-scsi stub device
  scsi-disk: add migration support
  scsi-generic: add migration support
  scsi: add SCSIDevice vmstate definitions
  scsi-disk: enable scatter/gather functionality
  scsi: add scatter/gather functionality
  scsi: pass residual amount to command_complete
  ahci: use new DMA helpers
  dma-helpers: add accounting wrappers
  dma-helpers: add dma_buf_read and dma_buf_write
  dma-helpers: make QEMUSGList target independent
2012-02-24 09:33:03 -06:00
Hervé Poussineau 78207d80a3 jazz-led: compile it only twice
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-22 09:02:19 -06:00
Jordan Justen bd183c79b5 hw/pc_sysfw: support system flash memory with pflash
Flash can be enabled by calling pc_system_firmware_init
with the system_flash_enabled parameter being non-zero.
If system_flash_enabled is zero, then the older qemu
rom creation method will be used.

If flash is enabled and a pflash image is found, then
it is used for the system firmware image.

If flash is enabled and a pflash image is not initially
found, then a read-only pflash device is created using
the -bios filename.

KVM cannot execute from a pflash region currently.
Therefore, when KVM is enabled, the old rom based
initialization method is used.

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-22 09:02:18 -06:00
Stefan Hajnoczi 973abc7f41 virtio-scsi: Add virtio-scsi stub device
Add a useless virtio SCSI HBA device:

  qemu -device virtio-scsi-pci

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-02-22 13:39:59 +01:00
Andreas Färber 10ecb3f665 linux-user: Add default configs for mips64[el]
Prepares for mips64[el]-linux-user targets.

Signed-off-by: Khansa Butt <khansa@kics.edu.pk>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2012-02-02 17:51:20 +02:00
Andreas Färber 72f341ff7a linux-user: Add default-configs for mipsn32[el]
Prepares for mipsn32[el]-linux-user targets.

Signed-off-by: Ulricht Hecht <uli@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2012-02-02 17:51:20 +02:00
Anthony Liguori c4ccbeaca5 Merge remote-tracking branch 'afaerber/prep-up' into staging
* afaerber/prep-up:
  prep: Use i82378 PCI->ISA bridge for 'prep' machine
  prep: Add i82378 PCI-to-ISA bridge emulation
  prep: Add i82374 DMA emulation
  MAINTAINERS: Add PCI host bridge files to PReP machine
  prep: qdev'ify Raven host bridge (SysBus)
  prep_pci: Update I/O to MemoryRegion ops
  prep_pci: Simplify I/O endianness
  prep: qdev'ify Raven host bridge (PCIDevice)
  prep: Use ISA m48t59
  prep: Fix offset of BIOS MemoryRegion
2012-01-23 10:58:02 -06:00
Blue Swirl 3d402831de vga: make Cirrus ISA device optional
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-01-22 07:28:23 +00:00
Andreas Färber a04ff94097 prep: Add i82378 PCI-to-ISA bridge emulation
Prepare Intel 82378 emulation for use by PReP platforms.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>

Create ISA bus in this device (suggested by Markus).
Rebase onto Memory API, mark memory ops as Little Endian.
Add VMState. Provide access to i8259 IRQs via qdev GPIOs.

Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
2012-01-20 00:27:12 +01:00
Andreas Färber 23b96cdb15 prep: Add i82374 DMA emulation
Prepare Intel 82374 emulation for use by Intel 82378 PCI->ISA bridge.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>

Confine to CONFIG_I82374. Add VMState.

Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Reviewed-by: Alexander Graf <agraf@suse.de>
2012-01-20 00:27:12 +01:00
Hector Martin 62c6ae04cf xhci: Initial xHCI implementation
Based on the implementation from Hector Martin <hector@marcansoft.com>

Hectors's implementation completely sidestepped the qemu usb system and
used libusb directly for usb device pass through.  So I've ripped out
the libusb bits (or left them in disabled, as reference for further
coding) and hooked up the qemu subsystem instead.  That work is not
complete yet though, partly due to limitations of the qemu usb
subsystem.  Nevertheless I think it is better to continue development
in-tree, especially as the qemu usb bits need a bunch of improvements
too for decent usb 3.0 support.

Current state:
  - usb-storage emulation should work ok.
  - Devices which need constant polling (HID emulation like usb-tablet)
    are known to not work.
  - ISO xfers are not implemented yet.
  - superspeed ports are not implemented yet.
  - usb pass-through is completely untested so far.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-01-17 09:44:32 +01:00
Max Filippov 82b25dc8b0 xtensa_lx60: add FLASH support
LX60 carry 4 Mbyte FLASH and 128 Kbyte SRAM, LX200 carry 16 Mbyte FLASH
and 32 Mbyte SRAM. Either of these memories may be mapped to the system
ROM region.

Select boot from FLASH if -kernel option is not specified, otherwise
boot from SRAM.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2011-11-02 05:05:52 +04:00
Jan Kiszka cfce6d8934 i8259: Move to hw library
No target-specific bits remaining, let's move it over.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16 11:11:56 +00:00
Max Filippov 0200db650e target-xtensa: add Avnet LX60/LX110/LX200 boards
These boards carry similar hardware: SDRAM (48M for LX110, 64M for LX60,
96M for LX200), 16 Mbyte FLASH, FPGA, 10/100 Mbps Ethernet PHY and 16550
UART. FPGA may be loaded with almost any Tensilica processor. It is also
used to implement Ethernet MAC, e.g. OpenCores 10/100 Mbps Ethernet MAC
and LED/DIP switches access.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16 10:42:21 +00:00
Richard Henderson 80bb2ff770 target-alpha: Add CLIPPER emulation.
This is a DP264 variant, SMP capable, no unusual hardware present.

The emulation does not currently include any PCI IOMMU code.
Hopefully the generic support for that can be merged to HEAD soon.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-08 08:49:09 -07:00
Max Filippov cfa550c6ac target-xtensa: add target to the configure script
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10 16:57:36 +00:00
Blue Swirl 1213406bf8 g364fb: compile in hwlib
Compile g364fb in hwlib. Two compilations less for the full build.

Acked-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10 14:46:12 +00:00
Richard Henderson b758aca1f6 target-alpha: Enable the alpha-softmmu target.
With all of the pre-existing code that would not compile gone,
this is the earliest point at which the target can be enabled.

There is no machine defined yet, so this will crash on startup.
Enable the target anyway, to make sure that further compilation
problems do not creep back in.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-05-31 10:18:05 -07:00
Gerd Hoffmann 94527ead7e usb: add ehci adapter
This patch finally merges the EHCI host adapter aka USB 2.0 support.

Based on the ehci bits collected @ git://git.kiszka.org/qemu.git ehci

EHCI has a long out-of-tree history.  Project was started by Mark
Burkley, with contributions by Niels de Vos.  David S. Ahern continued
working on it.  Kevin Wolf, Jan Kiszka and Vincent Palatin contributed
bugfixes.

/me (Gerd Hoffmann) picked it up where it left off, prepared the code
for merge, fixed a few bugs and added basic user docs.

Cc: David S. Ahern <daahern@cisco.com>
Cc: Jan Kiszka <jan.kiszka@web.de>
Cc: Kevin Wolf <mail@kevin-wolf.de>
Cc: Vincent Palatin <vincent.palatin_qemu@m4x.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-05-26 11:57:09 +02:00
Alexander Graf 0f3301d406 s390x: build s390x by default
This patch enables building of s390x-softmmu and s390x-linux-user
targets by default.

Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-20 17:35:12 +02:00
Guan Xuetao d2fbca9422 unicore32: necessary modifications for other files to support unicore32
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-04-12 18:49:05 +00:00
Michael Walle 5052d2277f lm32: add support for the Milkymist board
This patch adds almost complete support for the Milkymist system-on-chip
(http://www.milkymist.org).

Additional to running bare metal applications, booting a linux kernel with
initrd is supported.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04 10:26:54 +02:00
Michael Walle b4e37d9856 lm32: add Milkymist memory card support
This patch adds support for Milkymist's memory card core.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04 10:26:53 +02:00
Jan Kiszka 663dc4e7bb vmmouse: Fix typo preventing x86-64 build
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-03-22 07:44:14 +01:00
Michal Simek d746ce6dba microblaze: Compile uart 16550 serial driver
Upcomming little endian platform will use 16550 serial driver.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
2011-03-16 15:18:58 +01:00
Michael Walle d821732aba lm32: EVR32 and uclinux BSP
This patch adds support for the following two BSPs:
 - LM32 EVR32 BSP (as used by RTEMS)
 - uclinux BSP by Theobroma Systems

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-03-07 13:42:37 +01:00
Edgar E. Iglesias ed02c54d1f microblaze: Correct copy+paste:o in defconfigs
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-03-01 22:17:52 +01:00
Edgar E. Iglesias 877fdc12b1 microblaze: Allow targeting little-endian mb
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
2011-02-23 12:31:53 +01:00
Blue Swirl 1c9c5fcdfe applesmc: make optional
Based on patch by David Ahern.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-20 09:34:16 +00:00
Blue Swirl dd703b991c hpet: make optional
Ignore failure with hpet device creation.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-12 09:45:06 +00:00
Blue Swirl 86d864140b x86: make vmmouse optional
Compile vmmouse in hwlib. Ignore failure if vmmouse device can't be
created.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-12 09:43:44 +00:00
Alexander Graf f675d5c889 config: add ahci for pci capable machines
This patch enables AHCI for all machines supporting PCI.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17 16:11:02 +01:00
Alexander Graf 461d13d31c config: move ide core and pci to pci.mak
Every device that can do PCI should also be able to do IDE. So let's move
the IDE definitions over to pci.mak.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17 16:11:02 +01:00
Paul Brook a4c75a21f3 Split out common pcnet code
The core pcnet emulation code is used by both the PCI "pcnet" device
and the SPARC "lance" device.  Split the common code frm the PCI code so
that that can be configures independantly.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-11-27 11:23:34 +00:00
Paul Brook 129cac5b5a Remove PCI from sparc32 target
None of the (current) sparc32 machines have a PCI bus, so remove the PCI
code from these configs.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-11-27 10:33:55 +00:00
Paul Brook 050e27c8c9 Fix previous commit
Fix breakage from previous commit (missing pci.mak, and incorrect
include in default-configs/s390x-softmmu.mak).

Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-11-27 00:34:15 +00:00
Paul Brook 01af7daf55 VirtIO config option
Make virtio devices optional.  Selecting individual devices is not useful
as the host bindings are all in one file.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-11-27 00:06:13 +00:00
Paul Brook f8f5cfbaa4 PCI config include
Split PCI config options into a separate file

Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-11-27 00:06:13 +00:00
Edgar E. Iglesias 2c50e26efd powerpc: Add a virtex5 ml507 refdesign board
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2010-09-30 18:53:30 +02:00
Blue Swirl 08af49da7e piix4: compile only once
Compile piix4 in hwlib. Two compilations less for the full build.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-03 06:49:47 +00:00
Huacai Chen 016512f3d4 MIPS: Initial support of VIA IDE controller used by fulong mini pc
Signed-off-by: Huacai Chen <zltjiangshi@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-29 23:07:52 +02:00
Huacai Chen d0f7453d13 MIPS: Initial support of bonito north bridge used by fulong mini pc
Signed-off-by: Huacai Chen <zltjiangshi@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-29 23:07:51 +02:00
Blue Swirl 4556bd8b25 Compile dma only once
Use a qemu_irq to request CPU exit.

7 compilations less for the full build.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-22 08:00:52 +00:00
Blue Swirl 956a3e6bb7 Compile pckbd only once
Use a qemu_irq to indicate A20 line changes. Move I/O port 92
to pckbd.c.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-22 07:59:01 +00:00
Blue Swirl c69ea0dff2 Compile acpi_piix4, apm and pm_smbus only once
12 compilations less for the full build.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-17 19:32:37 +00:00
Artyom Tarasenko 676d9b9b88 sparc32 use empty_slot for missing RAM v1
use empty_slot device for the RAM which is not installed

Models without ECC don't trap when missing ram is accessed.

v0->v1 compile only once and fix indentation

Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-18 08:55:20 +00:00
Aurelien Jarno 5ba9e9522c sh_pci: fix memory and I/O access
Since commit 8da3ff1809 ("MMIO callback
interface changes"), the addresses passed to the I/O functions are an
offset to the start of the area. As a consequence, there is no need to
correct the address using the value of IOBR. This make possible the use
of the default MMIO functions. Moreover the addresses are now remaped
when the value if IOBR change.

The memory area corresponds to the devices behing the PCI bus, it should
not be mapped by the PCI controller. Remove the corresponding code.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-13 20:17:24 +02:00
Aurelien Jarno 56839a19e8 hw/r2d: add flash memory
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-11 03:58:19 +02:00
Paul Brook 61d3cf93e2 OHCI qdev conversion
Convert remaining OHCI devices to QDEV interface.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-04-05 19:57:40 +01:00
Blue Swirl 2b5eb37123 Compile most PPC devices only once
Make byte swapping unconditional since PPC is big endian.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-30 17:36:23 +00:00
Blue Swirl add85a76bb Compile prep_pci only once
Make byte swapping unconditional since PPC is big endian.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29 19:24:04 +00:00
Blue Swirl 5c4532ee78 Compile openpic only once
Replace TARGET_PAGE_SIZE with 4096. Make byte swapping unconditional
since PPC is big endian.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29 19:23:59 +00:00
Blue Swirl 02c7c992f0 Compile ide/macio only once
Replace TARGET_PAGE_SIZE with 4096. Make byte swapping unconditional
since PPC is big endian.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29 19:23:57 +00:00
Blue Swirl 3d08ff698b Compile pflash_cfi01 only once
Push TARGET_WORDS_BIGENDIAN dependency to board level.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29 19:23:56 +00:00
Blue Swirl 5f9fc5ad7e Compile pflash_cfi02 only once
Push TARGET_WORDS_BIGENDIAN dependency to board level.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29 19:23:55 +00:00
Blue Swirl 53b67b3052 Compile acpi only once
Use qemu_irqs to trigger CMOS S3 and SMI events.

Avoid using kvm.h, which uses CPUState.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29 19:23:52 +00:00
Blue Swirl 57448a975e Compile vmware_vga only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-27 18:18:17 +00:00
Blue Swirl b970ea8f8d Compile some MIPS devices only once
Move CPU specific declarations to a separate file.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-27 07:26:16 +00:00
Blue Swirl f7736b91c4 Compile ide/core only once
Make win2k install hack unconditional as it is still restricted to
x86 only in vl.c.

Replace TARGET_PAGE_SIZE and 4096 with PAGE_SIZE.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-27 06:20:53 +00:00
Alexander Graf b305b9d7d6 target-s390: Don't compile in virtio-pci
As soon as virtio-pci.c gets compiled and used on S390 the internal qdev magic
gets confused and tries to give us PCI devices instead of S390 virtio devices.

Since we don't have PCI on S390, we can safely not compile virtio-pci at all.

In order to do this I added a new config option "CONFIG_VIRTIO_PCI" that I
enabled for every platform except S390. Thanks to this the change should be a
complete nop for every other platform.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-26 23:41:10 +01:00
Blue Swirl 70615c38de Compile sound devices only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-22 20:18:40 +00:00
Blue Swirl 2d48377a85 Compile serial only once
Push TARGET_WORDS_BIGENDIAN dependency to board level.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:11 +00:00
Blue Swirl d3ffc7a6e7 Compile ne2000_isa only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:10 +00:00
Blue Swirl 35da37e141 Compile fdc only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:06 +00:00
Blue Swirl 9953b2fc28 Compile most IDE devices only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:05 +00:00
Blue Swirl 4c65f1e5ba Compile usb-uhci only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:04 +00:00
Blue Swirl 7f55c7ced6 Compile vga-isa only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:03 +00:00
Blue Swirl 7109371158 Compile pcspk only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:02 +00:00
Blue Swirl df6327780d Compile i8254 only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:02 +00:00
Blue Swirl b994504610 Compile parallel only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:01 +00:00
Blue Swirl 1afdfddc41 Compile vga-pci only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:00 +00:00
Kevin Wolf 7b23447571 Build usb-ohci for PCs
The OHCI emulation isn't obviously broken and there are people who want to use
it. Let's build it by default so that it can be enabled via -device.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-06 23:02:47 +01:00
Paul Brook 23f2166d73 ARM defconfig fix
Tix typo in default-configs/arm-softmmu.mak

Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-02-23 23:31:53 +00:00
Alexander Graf 10c339a07d Add support for S390x system emulation
Let's enable the basics for system emulation so we can run virtual machines
with KVM!

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-05 17:36:05 +01:00
Paul Brook 1dfe3943e9 DS1338 RTC
Implement MAXIM SD1338 RTC+NVRAM.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-11-22 21:27:40 +00:00
Paul Brook f165b53a89 Built network devices once
Move some generic NICS into libhw, and build them for ARM targets.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-11-19 16:42:45 +00:00
Juan Quintela c62c4551b8 Only compile ssi when one target uses it
Patchworks-ID: 35221
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08 21:17:17 -05:00
Juan Quintela 93a604004a Only compile ssi-sd when one target uses it
Patchworks-ID: 35220
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08 21:17:17 -05:00
Juan Quintela ee99ca01e8 Only compile max111x when one target uses it
Patchworks-ID: 35219
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08 21:17:17 -05:00
Juan Quintela 20a4afc421 Only compile ads7846 when one target uses it
Patchworks-ID: 35218
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08 21:17:17 -05:00
Juan Quintela 54bcf07471 Only compile sd0323 when one target uses it
Patchworks-ID: 35217
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08 21:17:17 -05:00
Juan Quintela 6a559be594 Only compile sd0303 when one target uses it
Patchworks-ID: 35216
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08 21:17:16 -05:00
Juan Quintela 4aa5b83fd1 Only compile stellaris_input when one target uses it
Patchworks-ID: 35213
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08 21:17:16 -05:00