OpenE2K
/
qemu-e2k
13
4
Fork 0
Code Issues 4 Pull Requests Projects 2 Releases Activity
qemu-e2k/hw
History
aliguori c45ca54ff9 IDE: Return zero when reading error register with slave selected (Justin Chevrier) 
During hardware detection Openserver issues commands to slaves on both primary
and secondary ports. We already return a zero for the status register in this
situation but after reading the status register the Openserver installer
proceeds to check the value of the error register. Currently we return the
existing value in the register. This confuses the installer and it tries to
access the slave units later on. When the command that gets issued later gets
ignored the installer freezes. The patch below returns zero when reading the
error register if a slave unit is selected. Openserver can now successfully be
installed using the emulated IDE hard drive.

Return zero when reading error register with slave selected

Signed-off-by: Justin Chevrier <theburner1@yahoo.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6252 c046a42c-6fe2-441c-8c8c-71466251a162
 		2009-01-08 21:03:07 +00:00
..
ac97.c Use the ARRAY_SIZE() macro where appropriate. 2008-12-22 20:33:55 +00:00
acpi.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
adb.c VM load/save support for PPC devices 2008-12-30 19:01:19 +00:00
adlib.c Make audio violate POSIX less 2008-12-03 22:48:44 +00:00
ads7846.c
…
alpha_palcode.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
an5206.c uImage: rename load_uboot() to load_uimage() (Hollis Blanchard) 2008-11-20 22:14:40 +00:00
apb_pci.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
apic.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
arm-misc.h Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
arm_boot.c uImage: rename load_uboot() to load_uimage() (Hollis Blanchard) 2008-11-20 22:14:40 +00:00
arm_gic.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
arm_pic.c
…
arm_sysctl.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
arm_timer.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
armv7m.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
armv7m_nvic.c Fix warnings that would be caused by ld flag --warn-common 2008-09-17 19:04:14 +00:00
audiodev.h
…
axis_dev88.c ETRAX: Always provide a valid net model. 2009-01-07 22:46:50 +00:00
baum.c baum: remove 2 warnings 2008-12-11 22:42:58 +00:00
baum.h
…
blizzard.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
blizzard_template.h Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
boards.h ETRAX: Add a model for the axis devboard88 machine. 2009-01-07 12:19:50 +00:00
bt-hci-csr.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
bt-hci.c Add qemu_strndup: qemu_strdup with length limit. 2008-11-09 00:28:40 +00:00
bt-hid.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
bt-l2cap.c Add L2CAP logic and a virtual SDP server for use in emulated devices. 2008-09-29 00:14:22 +00:00
bt-sdp.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
bt.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
bt.h Use VHCI to allow the host os to participate in a qemu bluetooth "vlan". 2008-09-29 00:31:41 +00:00
cbus.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
cdrom.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
cirrus_vga.c Add cirrus reset handler 2009-01-05 17:37:06 +00:00
cirrus_vga_rop.h
…
cirrus_vga_rop2.h
…
cs4231.c Remove address masking 2008-12-02 17:47:02 +00:00
cs4231a.c Make audio violate POSIX less 2008-12-03 22:48:44 +00:00
cuda.c VM load/save support for PPC devices 2008-12-30 19:01:19 +00:00
devices.h SM501 emulation for R2D-SH4 2008-11-05 20:24:35 +00:00
dma.c Use the ARRAY_SIZE() macro where appropriate. 2008-12-22 20:33:55 +00:00
ds1225y.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
dummy_m68k.c uImage: rename load_uboot() to load_uimage() (Hollis Blanchard) 2008-11-20 22:14:40 +00:00
e1000.c Implement e1000 link status (Mark McLoughlin) 2009-01-08 19:45:50 +00:00
e1000_hw.h
…
ecc.c
…
eccmemctl.c Implement hw/eccmemctl.c version differences (Robert Reif) 2008-12-23 15:08:13 +00:00
eepro100.c Add a -net name=foo parameter (Mark McLoughlin) 2009-01-07 17:48:51 +00:00
eeprom93xx.c
…
eeprom93xx.h
…
es1370.c Make audio violate POSIX less 2008-12-03 22:48:44 +00:00
esp.c Remove address masking 2008-12-02 17:47:02 +00:00
etraxfs.c ETRAX: Always provide a valid net model. 2009-01-07 22:46:50 +00:00
etraxfs.h
…
etraxfs_dma.c ETRAX: Process out channels immediately when the channel is started. 2009-01-07 13:46:31 +00:00
etraxfs_dma.h ETRAX-FS: Make etraxfs_dmac_run local. 2008-11-04 20:29:29 +00:00
etraxfs_eth.c Add a -net name=foo parameter (Mark McLoughlin) 2009-01-07 17:48:51 +00:00
etraxfs_pic.c ETRAX: Correctly update the interrupt vector when interrupts get masked. 2009-01-07 13:30:41 +00:00
etraxfs_ser.c ETRAX-FS: No need to decode the address anymore. 2008-12-06 23:19:03 +00:00
etraxfs_timer.c ETRAX: Support timer count reads and correct frequencies. 2009-01-07 13:24:40 +00:00
fdc.c Use the ARRAY_SIZE() macro where appropriate. 2008-12-22 20:33:55 +00:00
fdc.h
…
firmware_abi.h
…
flash.h Fill in WLAN and BT platform data in CAL area as expected by Maemo. 2008-07-29 14:19:16 +00:00
fmopl.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
fmopl.h
…
fw_cfg.c Allow to register a callback with fw_cfg_add_callback() 2008-12-11 17:30:50 +00:00
fw_cfg.h Add common keys to firmware configuration 2008-09-18 18:33:18 +00:00
g364fb.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
g364fb_template.h Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
grackle_pci.c VM load/save support for PPC devices 2008-12-30 19:01:19 +00:00
gt64xxx.c Fix undeclared symbol warnings from sparse 2008-10-26 13:43:07 +00:00
gumstix.c Set default max_cpus to one. 2008-10-28 10:59:59 +00:00
gus.c Add missing static qualifier 2008-12-11 00:14:28 +00:00
gusemu.h
…
gusemu_hal.c
…
gusemu_mixer.c
…
gustate.h
…
heathrow_pic.c VM load/save support for PPC devices 2008-12-30 19:01:19 +00:00
hpet.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
hpet_emul.h Remove trailing spaces introduced by commit 6081 2008-12-18 22:42:43 +00:00
hw.h Reintroduce migrate-to-exec: support (Charles Duffy) 2008-11-11 16:46:33 +00:00
i2c.c Fix load width for slave address in i2c_bus_load (Chris Lalancette). 2008-07-29 13:57:48 +00:00
i2c.h Don't use "hz" in identifiers to make AIX happy. 2008-11-12 17:36:08 +00:00
i8254.c Remove trailing spaces introduced by commit 6081 2008-12-18 22:42:43 +00:00
i8259.c Special Mask Mode for i8259 PIC (Sebastian Reichelt). 2008-07-19 09:18:48 +00:00
ide.c IDE: Return zero when reading error register with slave selected (Justin Chevrier) 2009-01-08 21:03:07 +00:00
integratorcp.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
iommu.c add Arbiter Enable Register support to sparc iommu (Robert Reif) 2008-12-21 10:46:23 +00:00
irq.c
…
irq.h
…
isa.h Make DMA bottom-half driven (v2) 2008-10-31 17:25:56 +00:00
isa_mmio.c
…
jazz_led.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
lm832x.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
lsi53c895a.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
m48t59.c Register reset handlers 2008-12-28 18:27:10 +00:00
mac_dbdma.c VM load/save support for PPC devices 2008-12-30 19:01:19 +00:00
mac_nvram.c VM load/save support for PPC devices 2008-12-30 19:01:19 +00:00
macio.c
…
mainstone.c Set default max_cpus to one. 2008-10-28 10:59:59 +00:00
mainstone.h
…
max111x.c
…
max7310.c Use the ARRAY_SIZE() macro where appropriate. 2008-12-22 20:33:55 +00:00
mc146818rtc.c Remove trailing spaces introduced by commit 6081 2008-12-18 22:42:43 +00:00
mcf.h
…
mcf5206.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
mcf5208.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
mcf_fec.c Fix build breakage introduced by r6219 2009-01-07 19:59:59 +00:00
mcf_intc.c
…
mcf_uart.c
…
mips.h target-mips: DMA support for RC4030 chipset 2009-01-01 13:03:36 +00:00
mips_int.c
…
mips_jazz.c target-mips: DMA support for RC4030 chipset 2009-01-01 13:03:36 +00:00
mips_malta.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
mips_mipssim.c Set default max_cpus to one. 2008-10-28 10:59:59 +00:00
mips_r4k.c Set default max_cpus to one. 2008-10-28 10:59:59 +00:00
mips_timer.c target-mips: CP0 Random register improvements 2009-01-08 18:48:12 +00:00
mipsnet.c Add a -net name=foo parameter (Mark McLoughlin) 2009-01-07 17:48:51 +00:00
mpcore.c Attached patch contains warning fixes. 2008-12-05 17:56:40 +00:00
mst_fpga.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
musicpal.c Add a -net name=foo parameter (Mark McLoughlin) 2009-01-07 17:48:51 +00:00
nand.c Fix undeclared symbol warnings from sparse 2008-10-26 13:43:07 +00:00
ne2000.c Add a -net name=foo parameter (Mark McLoughlin) 2009-01-07 17:48:51 +00:00
nseries.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
nvram.h Suppress gcc 4.x -Wpointer-sign (included in -Wall) warnings 2008-09-20 08:07:15 +00:00
omap.h Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
omap1.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
omap2.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
omap_clk.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
omap_dma.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
omap_dss.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
omap_i2c.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
omap_lcd_template.h
…
omap_lcdc.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
omap_mmc.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
omap_sx1.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
onenand.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
openpic.c Fix undeclared symbol warnings from sparse 2008-10-26 13:43:07 +00:00
palm.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
parallel.c Parallel port reset 2008-12-07 23:26:09 +00:00
pc.c Add HPET emulation to qemu (Beth Kon) 2008-12-17 23:28:44 +00:00
pc.h Fix warnings introduced by commit 6081 2008-12-18 22:42:34 +00:00
pci.c PCI: Mask writes to RO bits in the command reg of PCI config space 2008-12-18 22:43:40 +00:00
pci.h PCI: Mask writes to RO bits in the command reg of PCI config space 2008-12-18 22:43:40 +00:00
pci_host.h Improve PCI debug support 2009-01-08 18:52:52 +00:00
pckbd.c MIPS Magnum: fix memory-mapped i8042 2008-12-10 15:02:07 +00:00
pcmcia.h Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
pcnet.c Add a -net name=foo parameter (Mark McLoughlin) 2009-01-07 17:48:51 +00:00
pcspk.c Make audio violate POSIX less 2008-12-03 22:48:44 +00:00
pflash_cfi01.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
pflash_cfi02.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
piix_pci.c Fix undeclared symbol warnings from sparse 2008-10-26 13:43:07 +00:00
pixel_ops.h
…
pl011.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
pl022.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
pl031.c Fix RTC initial date computation 2008-12-04 21:34:52 +00:00
pl050.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
pl061.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
pl080.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
pl110.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
pl110_template.h
…
pl181.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
pl190.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
ppc.c Fix undeclared symbol warnings from sparse 2008-10-26 13:43:07 +00:00
ppc.h target-ppc: move OpenBIOS machines type to ppc.h from hw/ppc_oldworld.c 2009-01-08 16:01:23 +00:00
ppc4xx.h target-ppc: create a helper function to allow more flexible RAM allocation for PPC 4xx 2008-12-15 23:15:56 +00:00
ppc4xx_devs.c target-ppc: create a helper function to allow more flexible RAM allocation for PPC 4xx 2008-12-15 23:15:56 +00:00
ppc4xx_pci.c target-ppc: kill a few warnings 2008-12-07 23:00:00 +00:00
ppc405.h target-ppc: move PPC4xx SDRAM controller emulation from ppc405_uc.c to ppc4xx_devs.c 2008-12-15 22:59:34 +00:00
ppc405_boards.c PPC405EP: fix fpga write function 2008-12-11 22:43:07 +00:00
ppc405_uc.c target-ppc: rename ppc405_sdram_init() to ppc4xx_sdram_init() 2008-12-15 22:59:45 +00:00
ppc440.c target-ppc: PowerPC 440EP SoC emulation 2008-12-16 10:44:06 +00:00
ppc440.h target-ppc: PowerPC 440EP SoC emulation 2008-12-16 10:44:06 +00:00
ppc440_bamboo.c target-ppc: IBM PowerPC 440EP Bamboo reference board emulation 2008-12-16 10:44:14 +00:00
ppc_chrp.c Set default max_cpus to one. 2008-10-28 10:59:59 +00:00
ppc_mac.h Use OpenBIOS for g3bw machine 2008-12-24 20:23:51 +00:00
ppc_oldworld.c target-ppc: move OpenBIOS machines type to ppc.h from hw/ppc_oldworld.c 2009-01-08 16:01:23 +00:00
ppc_prep.c Fix PPC PREP platform, broken by commit 5849 2008-12-05 16:05:41 +00:00
prep_pci.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
primecell.h
…
ps2.c
…
ps2.h Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
ptimer.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
pxa.h Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
pxa2xx.c PXA: Account for offset from page start in a subpage mapping. 2008-12-07 16:08:49 +00:00
pxa2xx_dma.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
pxa2xx_gpio.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
pxa2xx_keypad.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
pxa2xx_lcd.c Fix the PXA2xx LCD dirty page detection a little more. 2008-12-15 01:35:39 +00:00
pxa2xx_mmci.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
pxa2xx_pcmcia.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
pxa2xx_pic.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
pxa2xx_template.h Fix RGBT 5:5:5 drawing on pxa2xx lcd (Lars Munch) 2008-11-03 01:08:14 +00:00
pxa2xx_timer.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
r2d.c SH4: kill a few warnings 2008-12-07 22:46:42 +00:00
rc4030.c target-mips: DMA support for RC4030 chipset 2009-01-01 13:03:36 +00:00
realview.c Set default max_cpus to one. 2008-10-28 10:59:59 +00:00
realview_gic.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
rtl8139.c Add a -net name=foo parameter (Mark McLoughlin) 2009-01-07 17:48:51 +00:00
sb16.c Use the ARRAY_SIZE() macro where appropriate. 2008-12-22 20:33:55 +00:00
sbi.c Remove address masking 2008-12-02 17:47:02 +00:00
scsi-disk.c add "serial" parameter to -drive flag (Gleb Natapov) 2009-01-07 17:32:33 +00:00
scsi-disk.h
…
scsi-generic.c scsi-generic: correct error management 2008-10-17 08:08:56 +00:00
scsi.h
…
sd.c
…
sd.h
…
serial.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
sh.h SH4: Eliminate P4 to A7 mangling (Takashi YOSHII). 2008-12-07 19:39:58 +00:00
sh7750.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
sh7750_regnames.c
…
sh7750_regnames.h
…
sh7750_regs.h
…
sh_intc.c Use the ARRAY_SIZE() macro where appropriate. 2008-12-22 20:33:55 +00:00
sh_intc.h Use the ARRAY_SIZE() macro where appropriate. 2008-12-22 20:33:55 +00:00
sh_pci.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
sh_serial.c SH4: SCI improvement 2008-12-07 22:46:49 +00:00
sh_timer.c SH4: Eliminate P4 to A7 mangling (Takashi YOSHII). 2008-12-07 19:39:58 +00:00
sharpsl.h
…
shix.c Make DMA bottom-half driven (v2) 2008-10-31 17:25:56 +00:00
slavio_intctl.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
slavio_misc.c hw/slavio_misc.c remove address from debug trace (Robert Reif) 2008-12-21 16:00:20 +00:00
slavio_serial.c Remove address masking 2008-12-02 17:47:02 +00:00
slavio_timer.c Remove address masking 2008-12-02 17:47:02 +00:00
sm501.c Use the ARRAY_SIZE() macro where appropriate. 2008-12-22 20:33:55 +00:00
sm501_template.h Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
smbus.c
…
smbus.h Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
smbus_eeprom.c
…
smc91c111.c Add a -net name=foo parameter (Mark McLoughlin) 2009-01-07 17:48:51 +00:00
soc_dma.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
soc_dma.h Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
sparc32_dma.c Revert part of r5853 2008-12-15 20:24:25 +00:00
sparc32_dma.h
…
spitz.c Move spitz microdrive to PCMCIA socket 0. 2008-12-07 23:33:34 +00:00
ssd0303.c Introduce accessors for DisplayState (Stefano Stabellini) 2008-11-24 19:29:13 +00:00
ssd0323.c Introduce accessors for DisplayState (Stefano Stabellini) 2008-11-24 19:29:13 +00:00
ssi-sd.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
stellaris.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
stellaris_enet.c Add a -net name=foo parameter (Mark McLoughlin) 2009-01-07 17:48:51 +00:00
stellaris_input.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
sun4c_intctl.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
sun4m.c Sun4m use 0 for nonexistent devices (Robert Reif) 2008-12-24 20:21:18 +00:00
sun4m.h Halt the CPU using a qemu_irq 2008-11-02 10:51:05 +00:00
sun4u.c Implement tick interrupt disable bits 2008-12-23 08:47:26 +00:00
tc6393xb.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
tc6393xb_template.h Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
tc58128.c Fix undeclared symbol warnings from sparse 2008-10-26 13:43:07 +00:00
tcx.c Remove address masking 2008-12-02 17:47:02 +00:00
tmp105.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
tosa.c tc6393xb: non-accelerated FB support (Dmitry Baryshkov). 2008-11-04 09:04:41 +00:00
tsc210x.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
tsc2005.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
tusb6010.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
twl92230.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
unin_pci.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
usb-bt.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
usb-hid.c fix usb-hid SET_IDLE behaviour (Stefano Stabellini) 2009-01-07 16:41:47 +00:00
usb-hub.c
…
usb-msd.c Add image format option for USB mass-storage devices 2008-08-21 22:24:32 +00:00
usb-musb.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
usb-net.c Add a -net name=foo parameter (Mark McLoughlin) 2009-01-07 17:48:51 +00:00
usb-ohci.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00
usb-serial.c Implement "info chardev" command. (Gerd Hoffmann) 2008-10-31 17:31:29 +00:00
usb-uhci.c uhci: Change default transaction lifetime to 32 frames (Max Krasnyansky) 2008-09-11 19:42:00 +00:00
usb-wacom.c
…
usb.c usb: generic packet handler cleanup and documentation (Max Krasnyansky) 2008-08-21 19:29:38 +00:00
usb.h Emulate a USB bluetooth dongle (or HCI Transport layer). 2008-09-29 00:40:44 +00:00
versatile_pci.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
versatilepb.c Change MMIO callbacks to use offsets, not absolute addresses. 2008-12-01 18:59:50 +00:00
vga.c Add cirrus reset handler 2009-01-05 17:37:06 +00:00
vga_int.h Add cirrus reset handler 2009-01-05 17:37:06 +00:00
vga_template.h
…
virtio-balloon.c pci: virtio: use pci id defines (Gerd Hoffman) 2008-12-11 21:20:03 +00:00
virtio-balloon.h Add virtio-balloon support 2008-12-04 20:33:06 +00:00
virtio-blk.c pci: virtio: use pci id defines (Gerd Hoffman) 2008-12-11 21:20:03 +00:00
virtio-blk.h pci: virtio: use pci id defines (Gerd Hoffman) 2008-12-11 21:20:03 +00:00
virtio-net.c Implement virtio_net link status (Mark McLoughlin) 2009-01-08 19:46:33 +00:00
virtio-net.h Implement virtio_net link status (Mark McLoughlin) 2009-01-08 19:46:33 +00:00
virtio.c Rename fls to qemu_fls 2008-12-11 19:37:54 +00:00
virtio.h Make struct iovec universally available 2008-12-05 20:05:26 +00:00
vmmouse.c Remove unnecessary trailing newlines 2008-12-13 09:32:43 +00:00
vmport.c Silence vmport unless DEBUG is enabled. 2008-08-19 19:13:06 +00:00
vmware_vga.c Use the ARRAY_SIZE() macro where appropriate. 2008-12-22 20:33:55 +00:00
wm8750.c Make audio violate POSIX less 2008-12-03 22:48:44 +00:00
zaurus.c Update FSF address in GPL/LGPL boilerplate 2009-01-04 22:05:52 +00:00