Since there are only 4 bnd registers, return "(bad)" for register
number > 3.
PR binutils/21594
* i386-dis.c (OP_E_register): Check valid bnd register.
(OP_G): Likewise.
PR binutils/21588
* rl78-decode.opc (OP_BUF_LEN): Define.
(GETBYTE): Check for the index exceeding OP_BUF_LEN.
(rl78_decode_opcode): Use OP_BUF_LEN as the length of the op_buf
array.
* rl78-decode.c: Regenerate.
This is a follow-up to
[PATCH 0/6] Unify the disassembler selection in gdb and objdump
https://sourceware.org/ml/binutils/2017-05/msg00192.html
that is, opcodes is able to select the right disassembler, so gdb
doesn't have to select them. Instead, gdb can just use
default_print_insn. As a result, these print_insn_XXX are not used
out of opcodes, so this patch also moves their declarations from
include/dis-asm.h to opcodes/disassemble.h. With this change,
GDB doesn't use any print_insn_XXX directly any more.
gdb:
2017-06-14 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_gdb_print_insn): Call
default_print_insn instead of print_insn_aarch64.
* arm-tdep.c (gdb_print_insn_arm): Call
default_print_insn instead of print_insn_big_arm
and print_insn_little_arm.
* i386-tdep.c (i386_print_insn): Call default_print_insn
instead of print_insn_i386.
* ia64-tdep.c (ia64_print_insn): Call
default_print_insn instead of print_insn_ia64.
* mips-tdep.c (gdb_print_insn_mips): Call
default_print_insn instead of print_insn_big_mips
and print_insn_little_mips.
* spu-tdep.c (gdb_print_insn_spu): Call default_print_insn
instead of print_insn_spu.
include:
2017-06-14 Yao Qi <yao.qi@linaro.org>
* dis-asm.h (print_insn_aarch64): Move it to opcodes/disassemble.h.
(print_insn_big_arm, print_insn_big_mips): Likewise.
(print_insn_i386, print_insn_ia64): Likewise.
(print_insn_little_arm, print_insn_little_mips): Likewise.
(print_insn_spu): Likewise.
opcodes:
2017-06-14 Yao Qi <yao.qi@linaro.org>
* aarch64-dis.c: Include disassemble.h instead of dis-asm.h.
* arm-dis.c: Likewise.
* ia64-dis.c: Likewise.
* mips-dis.c: Likewise.
* spu-dis.c: Likewise.
* disassemble.h (print_insn_aarch64): New declaration, moved from
include/dis-asm.h.
(print_insn_big_arm, print_insn_big_mips): Likewise.
(print_insn_i386, print_insn_ia64): Likewise.
(print_insn_little_arm, print_insn_little_mips): Likewise.
PR binutils/21587
* rx-decode.opc: Include libiberty.h
(GET_SCALE): New macro - validates access to SCALE array.
(GET_PSCALE): New macro - validates access to PSCALE array.
(DIs, SIs, S2Is, rx_disp): Use new macros.
* rx-decode.c: Regenerate.
Later CPU generations added optional operands to the ipte/idte
instructions. I've added these with:
https://sourceware.org/ml/binutils/2017-05/msg00316.html ... but
supported the optional operands only with the specific hardware
levels. However, it is more useful to have the optional operands
already in the first versions. Of course they need to be zero there.
Regression-tested with on s390 and s390x. Committed to mainline.
Bye,
-Andreas-
opcodes/ChangeLog:
2017-06-01 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-opc.txt: Support the optional parameters with the first
versions of ipte/idte.
gas/ChangeLog:
2017-06-01 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* testsuite/gas/s390/esa-g5.d: Add ipte tests.
* testsuite/gas/s390/esa-g5.s: Likewise.
* testsuite/gas/s390/zarch-z196.d: Remove ipte tests.
* testsuite/gas/s390/zarch-z196.s: Likewise.
* testsuite/gas/s390/zarch-z990.d: Add idte tests.
* testsuite/gas/s390/zarch-z990.s: Likewise.
* testsuite/gas/s390/zarch-zEC12.d: Remove ipte/idte tests.
* testsuite/gas/s390/zarch-zEC12.s: Likewise.
Currently print_insn_arc relies on BFD mach and ELF private headers to
distinguish between various ARC architectures. Sometimes those values are not
correct or available, mainly in the case of debugging targets without and ELF
file available. Changing a BFD mach is not a problem for the debugger, because
this is a generic BFD field, and GDB, for example, already sets it according to
information provided in XML target description or specified via GDB 'set arch'
command. However, things are more complicated for ELF private headers, since
it requires existing of an actual ELF file. To workaround this problem this
patch allows CPU model to be specified via disassemble info options. If CPU is
specified in options, then it will take a higher precedence than whatever might
be specified in ELF file.
This is mostly needed for ARC EM and ARC HS, because they have the same
"architecture" (mach) ARCv2 and differ in their private ELF headers. Other ARC
architectures can be distinguished between each other purely via "mach" field.
Proposed disassemble option format is "cpu=<CPU>", where CPU can be any valid
ARC CPU name as supported by GAS. Note that this creates a seeming redundancy
with objdump -m/--architecture option, however -mEM and -mHS still result in
"ARCv2" architecture internally, while -Mcpu={HS,EM} would have an actual
effect on disassembler.
opcodes/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* arc-dis.c (enforced_isa_mask): Declare.
(cpu_types): Likewise.
(parse_cpu_option): New function.
(parse_disassembler_options): Use it.
(print_insn_arc): Use enforced_isa_mask.
(print_arc_disassembler_options): Document new options.
binutils/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* doc/binutils.texi: Document new cpu=... disassembler options for ARC.
This patch adds missing variants of ipte and idte instructions added with later CPU
generations.
ipte got an optional operand with z196 and another one with zEC12.
idte got an optional operand with zEC12
opcodes/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-opc.c: Add new idte/ipte variants.
* s390-opc.txt: Likewise.
gas/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* testsuite/gas/s390/zarch-z196.d: Add new idte/ipte variants.
* testsuite/gas/s390/zarch-z196.s: Likewise.
* testsuite/gas/s390/zarch-zEC12.d: Likewise.
* testsuite/gas/s390/zarch-zEC12.s: Likewise.
So far we only had an instruction flag which made an arbitrary number
of operands optional. This limits error checking capabilities for
instructions marked that way. With this patch the optparm flag only
allows a single optional parameter and another one is added (optparm2)
allowing 2 optional arguments. Hopefully we won't need more than that
in the future. So far there will be only a single use of optparm2.
gas/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* config/tc-s390.c (md_gather_operands): Support new optparm2
instruction flag.
include/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* opcode/s390.h: Add new instruction flags optparm2.
opcodes/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-dis.c (s390_print_insn_with_opcode): Support new optparm2
instruction flag.
* s390-mkopc.c (main): Recognize the new instruction flag when
parsing instruction list.
This patch changes rl78 to let disassble.c:disassembler select
disassembler. rl78_get_disassembler doesn't handle the case
that abfd is NULL, so this patch also fix it.
gdb:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* rl78-tdep.c (rl78_gdbarch_init): Don't call
set_gdbarch_print_insn.
opcodes:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* rl78-dis.c (rl78_get_disassembler): If parameter abfd
is NULL, set cpu to E_FLAG_RL78_ANY_CPU.
Nowadays, opcodes/disassemble.c:disassembler selects the proper
disassembler according to ABFD only. However, it actually
selects disassemblers according to arch, mach, endianess, and
abfd. This patch adds them to the parameters of disassembler,
so that its caller can still select disassemblers in case that
abfd is NULL (a typical case in GDB).
There isn't any functionality change.
binutils:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* objdump.c (disassemble_data): Caller update.
include:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* dis-asm.h (disassembler): Update declaration.
opcodes:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* disassemble.c (disassembler): Add arguments a, big and mach.
Use them.
sim/common:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* sim-trace.c (trace_disasm): Caller update.
Add MIPS16e2 ASE support as per the architecture specification[1],
including in particular:
1. A new ELF ASE flag to mark MIPS16e2 binaries.
2. MIPS16e2 instruction assembly support, including a relaxation update
to use LUI rather than an LI/SLL instruction pair for loading the
high part of 32-bit addresses.
3. MIPS16e2 instruction disassembly support, including updated rules for
extended forms of instructions that are now subdecoded and therefore
do not alias to the original MIPS16 ISA revision instructions even
for encodings that are not valid in the MIPS16e2 instruction set.
Add `-mmips16e2' and `-mno-mips16e2' GAS command-line options and their
corresponding `mips16e2' and `no-mips16e2' settings for the `.set' and
`.module' pseudo-ops. Control the availability of the MT ASE subset of
the MIPS16e2 instruction set with a combination of these controls and
the preexisting MT ASE controls.
Parts of this change by Matthew Fortune and Andrew Bennett.
References:
[1] "MIPS32 Architecture for Programmers: MIPS16e2 Application-Specific
Extension Technical Reference Manual", Imagination Technologies
Ltd., Document Number: MD01172, Revision 01.00, April 26, 2016
include/
* elf/mips.h (AFL_ASE_MIPS16E2): New macro.
(AFL_ASE_MASK): Adjust accordingly.
* opcode/mips.h: Document new operand codes defined.
(mips_operand_type): Add OP_REG28 enum value.
(INSN2_SHORT_ONLY): Update description.
(ASE_MIPS16E2, ASE_MIPS16E2_MT): New macros.
bfd/
* elfxx-mips.c (print_mips_ases): Handle MIPS16e2 ASE.
opcodes/
* mips-dis.c (mips_arch_choices): Add ASE_MIPS16E2 and
ASE_MIPS16E2_MT flags to the unnamed MIPS16 entry.
(mips_convert_abiflags_ases): Handle the AFL_ASE_MIPS16E2 flag.
(print_insn_arg) <OP_REG28>: Add handler.
(validate_insn_args) <OP_REG28>: Handle.
(print_mips16_insn_arg): Handle MIPS16 instructions that require
32-bit encoding and 9-bit immediates.
(print_insn_mips16): Handle MIPS16 instructions that require
32-bit encoding and MFC0/MTC0 operand decoding.
* mips16-opc.c (decode_mips16_operand) <'>', '9', 'G', 'N', 'O'>
<'Q', 'T', 'b', 'c', 'd', 'r', 'u'>: Add handlers.
(RD_C0, WR_C0, E2, E2MT): New macros.
(mips16_opcodes): Add entries for MIPS16e2 instructions:
GP-relative "addiu" and its "addu" spelling, "andi", "cache",
"di", "ehb", "ei", "ext", "ins", GP-relative "lb", "lbu", "lh",
"lhu", and "lw" instructions, "ll", "lui", "lwl", "lwr", "mfc0",
"movn", "movtn", "movtz", "movz", "mtc0", "ori", "pause",
"pref", "rdhwr", "sc", GP-relative "sb", "sh" and "sw"
instructions, "swl", "swr", "sync" and its "sync_acquire",
"sync_mb", "sync_release", "sync_rmb" and "sync_wmb" aliases,
"xori", "dmt", "dvpe", "emt" and "evpe". Add split
regular/extended entries for original MIPS16 ISA revision
instructions whose extended forms are subdecoded in the MIPS16e2
ISA revision: "li", "sll" and "srl".
binutils/
* readelf.c (print_mips_ases): Handle MIPS16e2 ASE.
* NEWS: Mention MIPS16e2 ASE support.
gas/
* config/tc-mips.c (RELAX_MIPS16_ENCODE): Add `e2' flag.
(RELAX_MIPS16_E2): New macro.
(RELAX_MIPS16_PIC, RELAX_MIPS16_SYM32, RELAX_MIPS16_NOMACRO)
(RELAX_MIPS16_USER_SMALL, RELAX_MIPS16_USER_EXT)
(RELAX_MIPS16_DSLOT, RELAX_MIPS16_JAL_DSLOT)
(RELAX_MIPS16_EXTENDED, RELAX_MIPS16_MARK_EXTENDED)
(RELAX_MIPS16_CLEAR_EXTENDED, RELAX_MIPS16_ALWAYS_EXTENDED)
(RELAX_MIPS16_MARK_ALWAYS_EXTENDED)
(RELAX_MIPS16_CLEAR_ALWAYS_EXTENDED, RELAX_MIPS16_MACRO)
(RELAX_MIPS16_MARK_MACRO, RELAX_MIPS16_CLEAR_MACRO): Shift bits.
(mips16_immed_extend): New prototype.
(options): Add OPTION_MIPS16E2 and OPTION_NO_MIPS16E2 enum
values.
(md_longopts): Add "mmips16e2" and "mno-mips16e2" options.
(mips_ases): Add "mips16e2" entry.
(mips_set_ase): Handle MIPS16e2 ASE.
(insn_insert_operand): Explicitly handle immediates with MIPS16
instructions that require 32-bit encoding.
(is_opcode_valid_16): Pass enabled ASE bitmask on to
`opcode_is_member'.
(validate_mips_insn): Explicitly handle immediates with MIPS16
instructions that require 32-bit encoding.
(operand_reg_mask) <OP_REG28>: Add handler.
(match_reg28_operand): New function.
(match_operand) <OP_REG28>: Add handler.
(append_insn): Pass ASE_MIPS16E2 setting to RELAX_MIPS16_ENCODE.
(match_mips16_insn): Handle MIPS16 instructions that require
32-bit encoding and `V' and `u' operand codes.
(mips16_ip): Allow any characters except from `.' in opcodes.
(mips16_immed_extend): Handle 9-bit immediates. Do not shuffle
immediates whose width is not one of these listed.
(md_estimate_size_before_relax): Handle MIPS16e2 relaxation.
(mips_relax_frag): Likewise.
(md_convert_frag): Likewise.
(mips_convert_ase_flags): Handle MIPS16e2 ASE.
* doc/as.texinfo (Target MIPS options): Add `-mmips16e2' and
`-mno-mips16e2' options.
(-mmips16e2, -mno-mips16e2): New options.
* doc/c-mips.texi (MIPS Options): Add `-mmips16e2' and
`-mno-mips16e2' options.
(MIPS ASE Instruction Generation Overrides): Add `.set mips16e2'
and `.set nomips16e2'.
The `sel' operand of CP0 move instructions is a part of the base ISA and
has nothing to do with the MT ASE.
opcodes/
* mips-dis.c (print_insn_args) <default>: Remove an MT ASE
reference in CP0 move operand decoding.
Disassemble the MIPS16 BREAK and SDBBP instruction's immediate operand
in the hexadecimal rather than decimal numeral system and add respective
operandless variants with an implicit 0 operand, making our handling of
these instructions consistent with how we have processed their regular
MIPS and microMIPS counterparts since forever.
opcodes/
* mips16-opc.c (decode_mips16_operand) <'6'>: Switch the operand
type to hexadecimal.
(mips16_opcodes): Add operandless "break" and "sdbbp" entries.
binutils/
* testsuite/binutils-all/mips/mips16-extend-insn.d: Adjust BREAK
and SDBBP disassembly.
gas/
* testsuite/gas/mips/mips16.d: Adjust BREAK disassembly.
* testsuite/gas/mips/mips16-64@mips16.d: Likewise.
* testsuite/gas/mips/mips16-64.d: Likewise.
* testsuite/gas/mips/mips16-64@mips16-64.d: Likewise.
* testsuite/gas/mips/mips16-macro.d: Likewise.
* testsuite/gas/mips/mips16-64@mips16-macro.d: Likewise.
* testsuite/gas/mips/mips16-sub.d: Likewise.
* testsuite/gas/mips/mips16-32@mips16-sub.d: Likewise.
Following the way how descriptive SYNC mnemonics have been defined in
the architecture[1][2] mark them as aliases, so that the generic SYNC
instruction can be alternatively disassembled along with its immediate
operand, as noted in the documents referred.
References:
[1] "MIPS Architecture For Programmers, Volume II-A: The MIPS32
Instruction Set", MIPS Technologies, Inc., Document Number: MD00086,
Revision 5.04, December 11, 2013, Table 4.7 "Encodings of the
Bits[10:6] of the SYNC instruction; the SType Field", p. 305
[2] "MIPS Architecture for Programmers, Volume II-B: The microMIPS32
Instruction Set", MIPS Technologies, Inc., Document Number: MD00582,
Revision 5.04, January 15, 2014, Table 5.28 "Encodings of the
Bits[10:6] of the SYNC instruction; the SType Field", p. 481
opcodes/
* mips-opc.c (mips_builtin_opcodes): Mark "synciobdma", "syncs",
"syncw", "syncws", "sync_acquire", "sync_mb", "sync_release",
"sync_rmb" and "sync_wmb" as aliases.
* micromips-opc.c (micromips_opcodes): Mark "sync_acquire",
"sync_mb", "sync_release", "sync_rmb" and "sync_wmb" as aliases.
gas/
* testsuite/gas/mips/mips32r2-sync-1.d: New test.
* testsuite/gas/mips/micromips@mips32r2-sync-1.d: New test.
* testsuite/gas/mips/mips.exp: Run the new tests.
e.g.
1: auipc ra, %pcrel_hi(symbol)
jalr ra, %pcrel_lo(1b)(ra)
The use of ra instead of t1 for address construction provides an
opportunity for a microarchitecture to elide the write of the
destination address, and instead read the target address as an
immediate spread across the fused auipc+jalr pair. The link
register ra in the jalr overwrites the target address temporary.
2017-05-01 Michael Clark <michaeljclark@mac.com>
* riscv-opc.c (riscv_opcodes) <call>: Use RA not T1 as a temporary
register.
Correct the disassembly of the PC-relative immediate argument of the
MIPS16 synthetic LA, LW, DLA and LD instructions and do not mask the
LSB, which in this case is a part of the data address rather than the
ISA bit and has to be fully presented.
opcodes/
* mips-dis.c (print_insn_arg): Only clear the ISA bit for jumps
and branches and not synthetic data instructions.
binutils/
* testsuite/binutils-all/mips/mips16-undecoded.d: Adjust the
disassembly of PC-relative LA and LW synthetic instructions.
enter/leave mnemonics are enhanced to not only accept register ranges
but also single register (i.e., r13) or even no GPR register at all.
gas/
2017-04-25 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/leave_enter.d: Update test.
* testsuite/gas/arc/leave_enter.s: Likewise.
opcodes/
2017-04-25 Claudiu Zissulescu <claziss@synopsys.com>
* arc-dis.c (print_insn_arc): Smartly print enter/leave mnemonics.
* arc-opc.c (insert_r13el): New function.
(R13_EL): Define.
* arc-tbl.h: Add new enter/leave variants.
NOP and MOV 0,0 are having the same encoding. As MOV mnemonic is
located before NOP in the instruction table, the disassembler prints
MOV 0,0 for NOP. Reorder the instructions such that NOP is first.
gas/
2017-04-25 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/b.d: Update test.
* testsuite/gas/arc/noargs_hs.d: Likewise.
opcode/
2017-04-25 Claudiu Zissulescu <claziss@synopsys.com>
* arc-tbl.h: Reorder NOP entry to be before MOV instructions.
Complement commit 986e18a5a9 ("Add a second 'pinfo' member to
mips_opcode to extend number of available bits"),
<https://sourceware.org/ml/binutils/2005-01/msg00261.html>, and add a
help text for the `-M no-aliases' disassembler option.
opcodes/
* mips-dis.c (print_mips_disassembler_options): Add
`no-aliases'.
Complement commit 986e18a5a9 ("Add a second 'pinfo' member to
mips_opcode to extend number of available bits"),
<https://sourceware.org/ml/binutils/2005-01/msg00261.html>, and annotate
MIPS16 NOP, LA, DLA and the synthetic forms of LD and LW instructions as
aliases. These correspond to MOVE, and the PC-relative ADDIU, DADDIU,
LD and LW hardware instructions respectively.
binutils/
* testsuite/binutils-all/mips/mips16-alias.d: New test.
* testsuite/binutils-all/mips/mips16-noalias.d: New test.
* testsuite/binutils-all/mips/mips16-alias.s: New test source.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
opcodes/
* mips16-opc.c (AL): New macro.
(mips16_opcodes): Mark "nop", "la", "dla", and synthetic forms
of "ld" and "lw" as aliases.
This prevents the disassembler to show `return' instructions as
`rett' in V9 and later architectures.
opcodes/ChangeLog:
2017-04-21 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-opc.c (sparc_opcodes): Mark RETT instructions as v6notv9.
PR binutils/21380
opcodes * aarch64-tbl.h (aarch64_opcode_table): Fix masks for LD1R, LD2R,
LD3R and LD4R.
gas * testsuite/gas/aarch64/illegal-3.s: New file.
* testsuite/gas/aarch64/illegal-3.d: New file.
PPC_OPCODE_* renumbered to fill the gaps left by previous patches,
and reordered chronologically just because. I kept PPC_OPCODE_TMR
because presumably it might be used in future APUinfo for e6500.
include/
* opcode/ppc.h (PPC_OPCODE_*): Renumber and order chronologically.
(PPC_OPCODE_SPE): Comment on this and other bits used for APUinfo.
opcodes/
* ppc-dis.c (ppc_opts): Formatting. Set PPC_OPCODE_TMR for e6500.
* ppc-opc.c (powerpc_opcodes <mftmr, mttmr>): Remove now
unnecessary E6500.
This bit is also useless as it can be replaced with PPC_OPCODE_POWER9.
Defining the VSX2 and VSX3 selection based on cpu bits also lets the
assembler/disassembler distinguish between the power7 VSX opcodes and
the power8 ones. Note that this change means -mvsx now reverts back
to just adding the power7 VSX insns.
include/
* opcode/ppc.h (PPC_OPCODE_VSX3): Delete.
opcodes/
* ppc-dis.c (ppc_opts): Remove PPC_OPCODE_VSX3.
* ppc-opc.c (PPCVSX2): Define as PPC_OPCODE_POWER8.
(PPCVSX3): Define as PPC_OPCODE_POWER9.
This bit is worse than useless. Using it prevents the assembler and
disassembler distinguishing between opcodes added for power8 and those
added for power9.
include/
* opcode/ppc.h (PPC_OPCODE_ALTIVEC2): Delete.
opcodes/
* ppc-dis.c (ppc_opts): Remove PPC_OPCODE_ALTIVEC2.
* ppc-opc.c (PPCVEC2): Define as PPC_OPCODE_POWER8|PPC_OPCODE_E6500.
(PPCVEC3): Define as PPC_OPCODE_POWER9.
PPC_OPCODE_440 being set for ppc476 meant that many opcodes needed to
be deprecated for ppc476. There are far fewer to add specially for
ppc476 if PPC_OPCODE_440 is not set for ppc476.
* ppc-dis.c (ppc_opts <476>): Remove PPC_OPCODE_440.
* ppc-opc.c (MULHW): Add PPC_OPCODE_476.
(powerpc_opcodes): Adjust PPC440, PPC464 and PPC476 insns to suit
removal of PPC_OPCODE_440 from ppc476 cpu selection bits.
include * dis-asm.h: Add prototypes for wasm32 disassembler.
opcodes * Makefile.am: Add wasm32-dis.c.
* configure.ac: Add wasm32-dis.c to wasm32 target.
* disassemble.c: Add wasm32 disassembler code.
* wasm32-dis.c: New file.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
* po/opcodes.pot: Regenerate.
gas * testsuite/gas/wasm32/allinsn.d: Adjust test for disassembler
changes.
* testsuite/gas/wasm32/disass.d: New test.
* testsuite/gas/wasm32/disass.s: New test.
* testsuite/gas/wasm32/disass-2.d: New test.
* testsuite/gas/wasm32/disass-2.s: New test.
* testsuite/gas/wasm32/reloc.d: Adjust test for changed reloc
names.
* testsuite/gas/wasm32/reloc.s: Update test for changed assembler
syntax.
* testsuite/gas/wasm32/wasm32.exp: Run new tests. Expect allinsn
test to succeed.
The memory disassemble_info::disassembler_options points to is always
owned by the client. I.e., that field is an non-owning, observing
pointer. Thus const makes sense.
Are the include/ and opcodes/ bits OK?
Tested on x86_64 Fedora 23, built with --enable-targets=all.
include/ChangeLog:
2017-04-05 Pedro Alves <palves@redhat.com>
* dis-asm.h (disassemble_info) <disassembler_options>: Now a
"const char *".
(next_disassembler_option): Constify.
opcodes/ChangeLog:
2017-04-05 Pedro Alves <palves@redhat.com>
* arc-dis.c (parse_option, parse_disassembler_options): Constify.
* arm-dis.c (parse_arm_disassembler_options): Constify.
* ppc-dis.c (powerpc_init_dialect): Constify local.
* vax-dis.c (parse_disassembler_options): Constify.
gdb/ChangeLog:
2017-04-05 Pedro Alves <palves@redhat.com>
* arm-tdep.c (show_disassembly_style_sfunc): Constify local.
* disasm.c (set_disassembler_options): Constify local.
* i386-tdep.c (i386_print_insn): Remove cast and FIXME comment.
Nick Clifton