(tmp-gencode, gencode.o, gencode): Delete targets.
(simops.h): New file.
($(BUILT_SRC_FROM_IGEN)): Do not depend on simops.h.
* gencode.c: Delete file.
* hw_htab.c (htab_map_binary): Don't try to map the text section
when it is empty.
* emul_chirp.c (map_over_chirp_note): Default load-base to -1 not
CHIRP_LOAD_BASE.
(emul_chirp_create): Map in the interrupt table.
* lib/sim-defs.exp (run_sim_test): Include a description such as
"assembling" or "linking" that identifies the phase a test fails
in, for easier analysis of failures.
* interp.c (sim_resume): New function from sim-resume.c, install
the stepping event after having processed the pending ticks.
(has_stepped): Likewise.
(sim_info): Produce an output only if verbose or STATE_VERBOSE_P.
pending interrupts.
* interrupts.c (interrupts_process): Keep track of the last number
of masked insn cycles.
(interrupts_initialize): Clear last number of masked insn cycles.
(interrupts_info): Report them.
(interrupts_update_pending): Compute clear and set masks of
interrupts and clear the interrupt bits before setting them
(due to SCI interrupt sharing).
* interrupts.h (struct interrupts): New members last_mask_cycles
and xirq_last_mask_cycles.
2001-04-18 matthew green <mrg@redhat.com>
* armcopro.c (write_cp15_reg): Set CHANGEMODE if endianness changes.
(read_cp15_reg): Make non-static.
(XScale_cp15_LDC): Update for write_cp15_reg() change.
(XScale_cp15_MCR): Likewise.
(XScale_cp15_write_reg): Likewise.
(XScale_check_memacc): New function. Check for breakpoints being
activated by memory accesses. Does not support the Branch Target
Buffer.
(XScale_set_fsr_far): New function. Set FSR and FAR for XScale.
(XScale_debug_moe): New function. Set the debug Method Of Entry,
if configured.
(write_cp14_reg): Reset count counter if requested.
* armdefs.h (struct ARMul_State): New members `LastTime' and
`CP14R0_CCD' used for the timer/counters.
(ARMul_CP13_R0_FIQ, ARMul_CP13_R0_IRQ, ARMul_CP13_R8_PMUS,
ARMul_CP14_R0_ENABLE, ARMul_CP14_R0_CLKRST, ARMul_CP14_R0_CCD,
ARMul_CP14_R0_INTEN0, ARMul_CP14_R0_INTEN1, ARMul_CP14_R0_INTEN2,
ARMul_CP14_R0_FLAG0, ARMul_CP14_R0_FLAG1, ARMul_CP14_R0_FLAG2,
ARMul_CP14_R10_MOE_IB, ARMul_CP14_R10_MOE_DB, ARMul_CP14_R10_MOE_BT,
ARMul_CP15_R1_ENDIAN, ARMul_CP15_R1_ALIGN, ARMul_CP15_R5_X,
ARMul_CP15_R5_ST_ALIGN, ARMul_CP15_R5_IMPRE, ARMul_CP15_R5_MMU_EXCPT,
ARMul_CP15_DBCON_M, ARMul_CP15_DBCON_E1, ARMul_CP15_DBCON_E0): New
defines for XScale registers.
(XScale_check_memacc, XScale_set_fsr_far, XScale_debug_moe): Prototype.
(ARMul_Emulate32, ARMul_Emulate26): Clean up function definition.
(ARMul_Emulate32): Handle the clock counter and hardware instruction
breakpoints. Call XScale_set_fsr_far() for software breakpoints and
software interrupts.
(LoadMult): Call XScale_set_fsr_far() for data aborts.
(LoadSMult): Likewise.
(StoreMult): Likewise.
(StoreSMult): Likewise.
* armemu.h (write_cp15_reg): Update prototype.
* arminit.c (ARMul_NewState): Initialise CP14R0_CCD and LastTime.
(ARMul_Abort): If XScale, check for FIQ and IRQ being enabled in CP13
register 0.
* armvirt.c (GetWord): Call XScale_check_memacc().
(PutWord): Likewise.
PENDING_FILL. Use PENDING_SCHED directly to handle the pending
set of the FCSR.
* sim-main.h (COCIDX): Remove definition; this isn't supported by
PENDING_FILL, and you can get the intended effect gracefully by
calling PENDING_SCHED directly.
2001-03-16 Frank Ch. Eigler <fche@redhat.com>
Add support for mmap-based memory regions.
* sim-memopt.c (mmap_next_fd): New global.
(sim_memory_init): Reinitialize it.
(OPTION_MEMORY_MAPFILE, memory_option_handler): Support new
"--memory-mapfile FILE" option. Check for some errors.
(do_memopt_add): Conditionally do mmap instead of malloc for
backing store of simulated memory. Check for more errors.
(do_simopt_delete, sim_memory_uninstall): Corresponding cleanup.
* sim-memopt.h (munmap_length): New member of _sim_memopt.
* configure.in: Look for mmap/fstat related functions and headers.
* config.in, configure: Regenerated.
2001-02-09 Ben Elliston <bje@redhat.com>
* (profile_print_pc): Write header out in target byte order.
2001-02-09 Ben Elliston <bje@redhat.com>
* sim-profile.c (profile_pc_init): Correct bug in loop logic when
adjusting the pc shift value.
later inspection by the trap handler.
(count_argc): New function.
(prog_argv): Declare static.
(sim_write): Declare.
(trap): Implement argc, argnlen and argn system calls. Do not
abort on unknown system calls--simply return -1.
* syscall.h (SYS_argc, SYS_argnlen, SYS_argn): Define.
[common/ChangeLog]
2001-01-12 Chris Demetriou <cgd@sibyte.com>
* aclocal.m4 (SIM_AC_OPTION_SCACHE): Properly
handle the case where a numeric value is supplied.
[eg. m32r/ChangeLog]
2001-01-12 Frank Ch. Eigler <fche@redhat.com>
* configure: Regenerated with sim_scache fix.
* sim-fpu.h (sim_fpu_printn_fpu): Declare.
* sim-fpu.c (print_bits): Add digits parameter. Print only as many
trailing digits as specified (-1 to print all digits).
(sim_fpu_print_fpu): New wrapper around sim_fpu_printn_fpu.
(sim_fpu_printn_fpu): Rename from sim_fpu_print_fpu; update calls
to print_bits ().
* sim-endian.h: Don't have parameters on macro definitions which
are simply renaming functions, to permit use of XCONCAT2 in both
the macro name and the arguments in a use of such a definition.
In sim/ppc:
* sim-endian.h: Don't have parameters on macro definitions which
are simply renaming functions, to permit use of XCONCAT2 in both
the macro name and the arguments in a use of such a definition.
* lib/sim-defs.exp (run_sm_test): Correct comment. "output" and
"xerror" options do not use a list of machines. Clear options from
previous test case. Use "$cpu_option" to identify the machine to the
assembler, if specified.
* cgen.sh: Handle an isa argument between cpu and mach. Default to
`all'. Pass `-i' options to cgen applications.
* Make-common.in (cgen-arch, cgen-cpu, cgen-decode, cgen-cpu-decode,
cgen-desc): Pass $(isa) to cgen.sh.
2000-10-19 Frank Ch. Eigler <fche@redhat.com>
On advice from Chris G. Demetriou <cgd@sibyte.com>:
* sim-main.h (GPR_CLEAR): Remove unused alternative macro.
* dv-m68hc11tim.c (cycle_to_string): New function to translate
the cpu cycle into some formatted time string.
(m68hc11tim_print_timer): Use it.
* dv-m68hc11sio.c (m68hc11sio_info): Use cycle_to_string.
* dv-m68hc11spi.c (m68hc11spi_info): Likewise.
* interrupts.c (interrupts_info): Likewise.
* m68hc11_sim.c (cpu_info): Likewise.
* sim-profile.h (PROFILE_DATA): Add cpu_freq.
(PROFILE_CPU_FREQ): New macro.
* sim-profile.c (OPTION_PROFILE_CPU_FREQUENCY): New enumerator.
(profile-options): Add profile-cpu-frequency.
(parse_frequency): New function.
(profile_option_handler): Handle OPTION_PROFILE_CPU_FREQUENCY.
(profile_print_speed): Print cpu frequency and simulated execution time.
Re-indent other items to match.
(movm): Initialize PC and mask.
(mov, movbu, movhu): Set srcreg2 from RI0.
(bsch): Initialize c.
(sat16_cmp): Actually do the comparison.
(mov_llt): Do not overwrite dstreg with uninitialized variable.
* sim-events.c (sim_events_remain_time): New function returning
the time that remains before the event is raised.
* hw-events.c (hw_event_remain_time): Likewise.
* sim-events.h (sim_events_remain_time): Declare.
* hw-events.h (hw_event_remain_time): Declare.
* sim-hw.c: Use <errno.h> instead of <sys/errno.h>
(OPTION_HW_LIST): New option --hw-list to list the devices.
(hw_option_handler): List the device tree with 'sim_hw_print'.
* sim-bits.h (_MSB_16, _LSB_16): Define for 16-bit targets.
(MASK, LSBIT, MSBIT): Likewise and use _MSB_16 and _LSB_16.
(EXTENDED): Define for 16-bit word size.
* sim-bits.c (LSEXTRACTED, MSEXTRACTED, LSINSERTED,
MSINSERTED, LSSEXT, MSSEXT): Implement for 16-bit word size.
* sim-types.h: Added support for 16-bit targets.
(ARM_Strong_Prop, STRONGARM): Define.
* arminit.c (ARMul_NewState): Reset is_StrongARM.
(ARMul_SelectProcessor): Set is_StrongARM.
* wrapper.c (sim_create_inferior): Use bfd machine type to
determine processor type to emulate.
* armemu.h (BUSUSEDINCPCS, BUSUSEDINCPCN): Don't increment PC
when emulating StrongARM.
(SET_ABORT): Save CPSR in SPSR and set LR.
* armemu.c (ARMul_Emulate, isize): Set to INSN_SIZE.
(WriteR15, WriteSR15): Do not discard bit 1 in Thumb mode.
* arminit.c (ARMul_Abort): Use new SETABORT and INSN_SIZE.
* armemu.c (ARMul_Emulate26, bl): Use WriteR15Branch() to
modify PC. Moved the existing logic...
(WriteR15Branch): ... here. New function.
(WriteR15, WriteSR15): Drop the two least significant bits.
(LoadSMult): Use WriteR15Branch() to modify PC.
(LoadMult): Use WRITEDESTB() instead of WRITEDEST().
* armsupp.c (ARMul_CPSRAltered): Zero out bits as they're
extracted from state->Cpsr, but preserve the unused bits.
(ARMul_GetCPSR): Get bits preserved in state->Cpsr.
(ARMul_GetSPSR, ARMul_FixCPSR): Use ARMul_GetCPSR() to
get the full CPSR word.
(SETPSR_F, SETPSR_S, SETPSR_X, SETPSR_C): New macros.
(SETPSR, SET_INTMODE, SETCC): Removed.
* armsupp.c (ARMul_FixCPSR, ARMul_FixSPSR): Do not test bit
mask. Use SETPSR_* to modify PSR.
(ARMul_SetCPSR): Load all bits from value.
* armemu.c (ARMul_Emulate, msr): Do not test bit mask.
2000-06-20 Frank Ch. Eigler <fche@redhat.com>
* compile.c: Don't include "wait.h".
(sim_resume): Use local SIM_WIFEXITED and SIM_WIFSIGNALED macros
instead of WIF* from host.
* Makefile.in (interp.o): Depends on ppi.c .
(ppi.c): New rule.
* gencode.c (printonmatch, think, genopc): Deleted.
(MAX_NR_STUFF): Now 42.
(tab): Add SH-DSP CPU instructions.
Amalgamate ldc / stc / lds / sts instructions with similar
bit patterns. Fix opcodes of stc Rm_BANK,@-<REG_N>.
Fix semantics of lds.l @<REG_N>+,MACH (no sign extend).
(movsxy_tab): New array.
For movs, change MMMM field to GGGG, and mmmm field to MMMM.
Added entries for movx, movy and parallel processing insns.
(ppi_tab): New array.
(qfunc): Stabilize sort.
(expand_opcode): Handle [01][01]NN, [01][01]xx and [01][01]yy.
Handle 'M', 'G' 's' 'X', 'a', 'Y' and 'A'.
(dumptable): Now takes three arguments. Changed all callers.
Emit just one contigous jump table.
(filltable): Now takes an argument. Changed all callers.
Make index static.
(ppi_moves, expand_ppi_code, ppi_filltable, ppi_gensim): New functions.
(gensim_caselist): New function, broken out of gensim.
Handle opcode fields 'x', 'y', 's', 'M', 'G', 'X', 'a', and 'Y'.
Handle ref '9'.
(gensim): Handle 'N' in code field and '8' in refs field.
Call gensim_caselist - twice.
(ppi_index): New static variable.
(main): Unsupport default action.
Add dsp support for -x / -s option. Add -p option.
* interp.c (sh_jump_table, sh_dsp_table, ppi_table): Declare.
(saved_state_type): Rearrange to allow amalgamated ldc / stc /
lds / sts to work efficiently.
(target_dsp): New static variable.
(GBR, VBR, SSR, SPC, MACH, MACL): Reflect saved_state_type change.
(FPUL, Rn_BANK, SET_Rn_BANK, M, Q, S, T, SR_BL, SR_RB): Likewise.
(SR_MD, SR_RC, SET_SR_BIT, GET_SR, SET_RC, GET_FPSCR): Likewise.
(RS, RE, MOD, MOD_ME, DSP_R): Likewise.
(set_fpscr1): Likewise. Use target_dsp to check for dsp.
(MOD_MSi, SIG_BUS_FETCH): Deleted.
(CREG, SREG, PR, SR_MASK_DMY, SR_MASK_DMX, SR_DMY): New macros.
(SR_DMX, DSR, MOD_DELTA, GET_DSP_GRD): Likewise.
(SET_MOD): Reflect saved_state_type change. Set MOD_DELTA instead
of MOD_MS, and encode SR_DMY / SR_DMX into high word of MOD_ME.
(set_sr): Reflect saved_state_type change. Fix SR_RB handling.
Use SET_MOD.
(MA, L, TL, TB): Now controlled by ACE_FAST.
(SEXT32): Just cast to int.
(SIGN32): Fixed to only shift by 31.
(CHECK_INSN_PTR): SIGBUS at insn fetch now represented by insn_end 0.
(ppi_insn): Declare.
(ppi.c): Include.
(init_dsp): Set target_dsp. When it changes, switch end of
sh_jump_table with sh_dsp_table.
(sim_resume) Don't declare sh_jump_table0. Use sh_jump_table instead.
Don't Declare PR if it's #defined.
Fix single-stepping (Was broken in Mar 6 16:59:10 patch).
(sim_store_register, sim_read_register): Translate accesses to
reflect saved_state_type change.
* interp.c (set_sr): Set sr.
(SET_RC, MOD, MOD_MS, MOD_ME, SET_MOD, MOD_MS, MOD_ME): New macros.
(set_fpscr1): Don't bank-switch fpu registers when simulating sh-dsp.
(DSP_R): Fix definition.
(sim_resume): Remove outdated SET_SR use.
* interp.c (saved_state): New members for struct member asregs:
rs, re, insn_end, xram_start, yram_start.
(struct loop_bounds): New struct.
(SKIP_INSN): New macro.
(get_loop_bounds): New function.
(endianw): Renamed to global_endianw.
(maskw): negated bits.
(PC): Now insn_ptr.
(SR_MASK_RC, SR_RC_INCREMENT, SR_RC, RAISE_EXCEPTION): New macros.
(RS, RE, DSP_R, DSP_GRD, A1, A0, X0, X1, Y0, Y1, M0, A1G): Likewise.
(M1, A0G, RIAT, PT2H, PH2T, SET_NIP, CHECK_INSN_PTR): Likewise.
(SIG_BUS_FETCH): Likewise
(raise_exception, riat_fast): New functions.
(raise_buserror, sim_stop): Use raise_exception.
(PROCESS_SPECIAL_ADDRESS): Use xram_start / yram_start.
(BUSERROR, WRITE_BUSERROR, READ_BUSERROR):
Reverse sense of mask argument.
(FP_OP, set_dr): Use RAISE_EXCEPTION.
(wlat_fast, wwat_fast, wbat_fast, rlat_fast, rwat_fast, rbat_fast):
Declare. Remove redundant masking.
(wwat_fast, rwat_fast): Add argument endianw. Changed callers.
(MA): Updated for change pc -> PC.
(Delay_Slot): Use RIAT.
(empty): Deleted.
(trap): Remove argument little_endian. Add argument endianw.
Changed all callers. Use raise_exception.
(macw): Add argument endainw. Changed all callers.
(init_dsp): New function, extended after broken out of init_pointers.
(sim_resume): Replace pc with insn_ptr. Replace little_endian with
endianw. Replace nia with nip. Reverse sense of maskb / maskw /
maskl. Implement logic for zero-overhead loops. Don't try to
interpret garbage when getting a SIGBUS at insn fetch.
(sim_open): Call init_dsp.
* gencode.c (tab): Use SET_NIP instead of nia = . Use PH2T / PT2H /
RAISE_EXCEPTION where appropriate.
Add extra cycles for brai, braf , bsr, bsrf, jmp, jsr.
* interp.c (sim_store_register, sim_fetch_register):
Do proper endianness switch.
* interp.c (saved_state_type): New members for struct member asregs:
xymem_select, xmem, ymem, xmem_offset, ymem_offset.
(special_address): Delete.
(BUSERROR): Now a two-argument predicate.
(PROCESS_SPECIAL_ADDRESS, WRITE_BUSERROR, READ_BUSERROR): New macros.
(wlat_little, wwat_little, wbat_any, wlat_big, wwat_big): Delete.
(process_wlat_addr, process_wwat_addr): New functions.
(process_wbat_addr, process_rlat_addr, process_rwat_addr): Likewise.
(process_rbat_addr): Likewise.
(wlat_fast, wwat_fast, wbat_fast): Use WRITE_BUSERROR.
(rlat_little, rwat_little, rbat_any, rlat_big, rwat_big): Delete.
(rlat_fast, rwat_fast, rbat_fast): Use READ_BUSERROR.
(RWAT, RLAT, RBAT, WWAT, WLAT, WBAT): Delete SLOW versions.
(do_rdat, trap): Delete SLOW code.
(SEXT32, SIGN32): New macros.
(swap, swap16): Now integer in - integer out. Changed all callers.
(strswaplen, strnswap): Delete SLOW versions.
(init_pointers): Initialize dsp memory selection (preliminary).
(sim_store_register, sim_fetch_register): Use swap instead of
big / little endian read / write functions.
* interp.c (maskl): Deleted.
(endianw, endianb): New variables.
(special_address): Now inline.
(bp_holder): Put raising of buserror there, rename to:
(raise_buserror).
(BUSERROR): Now yields a value. Changed all users.
(wbat_big): Delete.
(wlat_fast, wwat_fast, wbat_fast): New functions.
(rlat_fast, rwat_fast, rbat_fast): Likewise.
(RWAT, RLAT, RBAT, WWAT, WLAT, WBAT): Use new functions.
(do_rdat, do_wdat): Likewise. Take maskl argument instead of
little_endian one. Changed caller macros.
(swap, swap16): Use w[rw]lat_big / w[rw]lat_little directly.
(strswaplen, strnswap): New functions.
(trap): Use them to fix up endian mismatches;
disable SYS_execve and SYS_execv; fix double address translation for
SYS_pipe and SYS_stat.
(sym_write, sym_read): Add endianness translation.
(sym_store_register, sym_fetch_register): Add maskl local variable.
(sim_open): Set endianw and endianb.
genericXor, genericBtst): Use `unsigned32'.
* op_utils.c: Likewise.
* mn10300.igen, am33.igen: Use `unsigned32', `signed32',
`unsigned64' or `signed64' where type width is relevant.
sim:
* Makefile.in (interp.o): Depends on ppi.c .
(ppi.c): New rule.
* gencode.c (printonmatch, think, genopc): Deleted.
(MAX_NR_STUFF): Now 42.
(tab): Add SH-DSP CPU instructions.
Amalgamate ldc / stc / lds / sts instructions with similar
bit patterns. Fix opcodes of stc Rm_BANK,@-<REG_N>.
Fix semantics of lds.l @<REG_N>+,MACH (no sign extend).
(movsxy_tab): New array.
For movs, change MMMM field to GGGG, and mmmm field to MMMM.
Added entries for movx, movy and parallel processing insns.
(ppi_tab): New array.
(qfunc): Stabilize sort.
(expand_opcode): Handle [01][01]NN, [01][01]xx and [01][01]yy.
Handle 'M', 'G' 's' 'X', 'a', 'Y' and 'A'.
(dumptable): Now takes three arguments. Changed all callers.
Emit just one contigous jump table.
(filltable): Now takes an argument. Changed all callers.
Make index static.
(ppi_moves, expand_ppi_code, ppi_filltable, ppi_gensim): New functions.
(gensim_caselist): New function, broken out of gensim.
Handle opcode fields 'x', 'y', 's', 'M', 'G', 'X', 'a', and 'Y'.
Handle ref '9'.
(gensim): Handle 'N' in code field and '8' in refs field.
Call gensim_caselist - twice.
(ppi_index): New static variable.
(main): Unsupport default action.
Add dsp support for -x / -s option. Add -p option.
* interp.c (sh_jump_table, sh_dsp_table, ppi_table): Declare.
(saved_state_type): Rearrange to allow amalgamated ldc / stc /
lds / sts to work efficiently.
(target_dsp): New static variable.
(GBR, VBR, SSR, SPC, MACH, MACL): Reflect saved_state_type change.
(FPUL, Rn_BANK, SET_Rn_BANK, M, Q, S, T, SR_BL, SR_RB): Likewise.
(SR_MD, SR_RC, SET_SR_BIT, GET_SR, SET_RC, GET_FPSCR): Likewise.
(RS, RE, MOD, MOD_ME, DSP_R): Likewise.
(set_fpscr1): Likewise. Use target_dsp to check for dsp.
(MOD_MSi, SIG_BUS_FETCH): Deleted.
(CREG, SREG, PR, SR_MASK_DMY, SR_MASK_DMX, SR_DMY): New macros.
(SR_DMX, DSR, MOD_DELTA, GET_DSP_GRD): Likewise.
(SET_MOD): Reflect saved_state_type change. Set MOD_DELTA instead
of MOD_MS, and encode SR_DMY / SR_DMX into high word of MOD_ME.
(set_sr): Reflect saved_state_type change. Fix SR_RB handling.
Use SET_MOD.
(MA, L, TL, TB): Now controlled by ACE_FAST.
(SEXT32): Just cast to int.
(SIGN32): Fixed to only shift by 31.
(CHECK_INSN_PTR): SIGBUS at insn fetch now represented by insn_end 0.
(ppi_insn): Declare.
(ppi.c): Include.
(init_dsp): Set target_dsp. When it changes, switch end of
sh_jump_table with sh_dsp_table.
(sim_resume) Don't declare sh_jump_table0. Use sh_jump_table instead.
Don't Declare PR if it's #defined.
Fix single-stepping (Was broken in Mar 6 16:59:10 patch).
(sim_store_register, sim_read_register): Translate accesses to
reflect saved_state_type change.
* interp.c (set_sr): Set sr.
(SET_RC, MOD, MOD_MS, MOD_ME, SET_MOD, MOD_MS, MOD_ME): New macros.
(set_fpscr1): Don't bank-switch fpu registers when simulating sh-dsp.
(DSP_R): Fix definition.
(sim_resume): Remove outdated SET_SR use.
* interp.c (saved_state): New members for struct member asregs:
rs, re, insn_end, xram_start, yram_start.
(struct loop_bounds): New struct.
(SKIP_INSN): New macro.
(get_loop_bounds): New function.
(endianw): Renamed to global_endianw.
(maskw): negated bits.
(PC): Now insn_ptr.
(SR_MASK_RC, SR_RC_INCREMENT, SR_RC, RAISE_EXCEPTION): New macros.
(RS, RE, DSP_R, DSP_GRD, A1, A0, X0, X1, Y0, Y1, M0, A1G): Likewise.
(M1, A0G, RIAT, PT2H, PH2T, SET_NIP, CHECK_INSN_PTR): Likewise.
(SIG_BUS_FETCH): Likewise
(raise_exception, riat_fast): New functions.
(raise_buserror, sim_stop): Use raise_exception.
(PROCESS_SPECIAL_ADDRESS): Use xram_start / yram_start.
(BUSERROR, WRITE_BUSERROR, READ_BUSERROR):
Reverse sense of mask argument.
(FP_OP, set_dr): Use RAISE_EXCEPTION.
(wlat_fast, wwat_fast, wbat_fast, rlat_fast, rwat_fast, rbat_fast):
Declare. Remove redundant masking.
(wwat_fast, rwat_fast): Add argument endianw. Changed callers.
(MA): Updated for change pc -> PC.
(Delay_Slot): Use RIAT.
(empty): Deleted.
(trap): Remove argument little_endian. Add argument endianw.
Changed all callers. Use raise_exception.
(macw): Add argument endainw. Changed all callers.
(init_dsp): New function, extended after broken out of init_pointers.
(sim_resume): Replace pc with insn_ptr. Replace little_endian with
endianw. Replace nia with nip. Reverse sense of maskb / maskw /
maskl. Implement logic for zero-overhead loops. Don't try to
interpret garbage when getting a SIGBUS at insn fetch.
(sim_open): Call init_dsp.
* gencode.c (tab): Use SET_NIP instead of nia = . Use PH2T / PT2H /
RAISE_EXCEPTION where appropriate.
Add extra cycles for brai, braf , bsr, bsrf, jmp, jsr.
* interp.c (sim_store_register, sim_fetch_register):
Do proper endianness switch.
* interp.c (saved_state_type): New members for struct member asregs:
xymem_select, xmem, ymem, xmem_offset, ymem_offset.
(special_address): Delete.
(BUSERROR): Now a two-argument predicate.
(PROCESS_SPECIAL_ADDRESS, WRITE_BUSERROR, READ_BUSERROR): New macros.
(wlat_little, wwat_little, wbat_any, wlat_big, wwat_big): Delete.
(process_wlat_addr, process_wwat_addr): New functions.
(process_wbat_addr, process_rlat_addr, process_rwat_addr): Likewise.
(process_rbat_addr): Likewise.
(wlat_fast, wwat_fast, wbat_fast): Use WRITE_BUSERROR.
(rlat_little, rwat_little, rbat_any, rlat_big, rwat_big): Delete.
(rlat_fast, rwat_fast, rbat_fast): Use READ_BUSERROR.
(RWAT, RLAT, RBAT, WWAT, WLAT, WBAT): Delete SLOW versions.
(do_rdat, trap): Delete SLOW code.
(SEXT32, SIGN32): New macros.
(swap, swap16): Now integer in - integer out. Changed all callers.
(strswaplen, strnswap): Delete SLOW versions.
(init_pointers): Initialize dsp memory selection (preliminary).
(sim_store_register, sim_fetch_register): Use swap instead of
big / little endian read / write functions.
* interp.c (maskl): Deleted.
(endianw, endianb): New variables.
(special_address): Now inline.
(bp_holder): Put raising of buserror there, rename to:
(raise_buserror).
(BUSERROR): Now yields a value. Changed all users.
(wbat_big): Delete.
(wlat_fast, wwat_fast, wbat_fast): New functions.
(rlat_fast, rwat_fast, rbat_fast): Likewise.
(RWAT, RLAT, RBAT, WWAT, WLAT, WBAT): Use new functions.
(do_rdat, do_wdat): Likewise. Take maskl argument instead of
little_endian one. Changed caller macros.
(swap, swap16): Use w[rw]lat_big / w[rw]lat_little directly.
(strswaplen, strnswap): New functions.
(trap): Use them to fix up endian mismatches;
disable SYS_execve and SYS_execv; fix double address translation for
SYS_pipe and SYS_stat.
(sym_write, sym_read): Add endianness translation.
(sym_store_register, sym_fetch_register): Add maskl local variable.
(sim_open): Set endianw and endianb.
gdb:
* sh-tdep.c (sh_dsp_reg_names, sh3_dsp_reg_names): New arrays.
(sh_processor_type_table): Add entries for bfd_mach_sh_dsp and
bfd_mach_sh3_dsp.
(sh_show_regs): Floating point registers are called fr0-fr15.
For sh4, display fpul, fpscr and fr0-fr15 / dr0-dr14 as appropriate.
Handle sh-dsp and sh3-dsp.
config/sh/tm-sh.h (REGISTER_VIRTUAL_TYPE): sh-dsp / sh3-dsp
don't have floating point registers.
(DSR_REGNUM, A0G_REGNUM, A0_REGNUM, A1G_REGNUM, A1_REGNUM): Define.
(M0_REGNUM, M1_REGNUM, X0_REGNUM, X1_REGNUM, Y0_REGNUM): Likewise.
(Y1_REGNUM, MOD_REGNUM, RS_REGNUM, RE_REGNUM, R0B_REGNUM): Likewise.
2000-04-14 Gary Thomas <gthomas@redhat.com>
* v850.igen: Define 'br *' as illegal since this is the only
way to provide a breakpoint on some v850 family processors.
2000-03-11 Philip Blundell <philb@gnu.org>
* armemu.c (LoadSMult, LoadMult): Correct handling of aborts.
Patch from Allan Skillman <Allan.Skillman@arm.com>.
* cgen-fpu.h: Rename extsfdf to fextsfdf. Rename truncdfsf to
ftruncdfsf.
* cgen-accfp.c (fextsfdf): New function.
(ftruncdfsf): New function.
(cgen_init_accurate_fpu): Initialize fextsfdf and ftruncdfsf.
Kazu Hirata
Andrew Cagney
Matthew Green
Ben Elliston
Fred Fish
Ben Harris
Dave Brolley
Nick Clifton
John R. Moore
Stephane Carrez
Daniel Jacobowitz
Jim Blandy
Alexandre Oliva
Frank Ch. Eigler
J.T. Conklin
Michael Meissner
Chris Demetriou
DJ Delorie
Jonathan Larmour
Geoffrey Keating
Michael Chastain
Greg McGary
Elena Zannoni
Fernando Nasser
Jeff Law
Joern Rennecke