opcodes/
* ppc-opc.c (powerpc_opcodes) <brd, brh, brw>: New mnemonics.
gas/
* testsuite/gas/ppc/byte_rev.d,
* testsuite/gas/ppc/byte_rev.s: New test.
* testsuite/gas/ppc/ppc.exp: Run it.
opcodes/
* ppc-opc.c (powerpc_opcodes) <slbiag>: Add variant with L operand.
gas/
* testsuite/gas/ppc/power10.s: New test.
* testsuite/gas/ppc/power10.d: Likewise.
* testsuite/gas/ppc/ppc.exp: Run it.
Now that ISA3.1 is out we can finish with the powerxx silliness.
bfd/
* elf64-ppc.c: Rename powerxx to power10 throughout.
gas/
* config/tc-ppc.c (md_assemble): Update for PPC_OPCODE_POWER10
renaming.
* testsuite/gas/ppc/prefix-align.d: Use -mpower10/-Mpower10 in
place of -mfuture/-Mfuture.
* testsuite/gas/ppc/prefix-pcrel.d: Likewise.
* testsuite/gas/ppc/prefix-reloc.d: Likewise.
gold/
* powerpc.cc: Rename powerxx to power10 throughout.
include/
* elf/ppc64.h: Update comment.
* opcode/ppc.h (PPC_OPCODE_POWER10): Rename from PPC_OPCODE_POWERXX.
ld/
* testsuite/ld-powerpc/callstub-1.d: Use -mpower10/-Mpower10 in
place of -mfuture/-Mfuture.
* testsuite/ld-powerpc/notoc2.d: Likewise.
* testsuite/ld-powerpc/powerpc.exp: Likewise.
* testsuite/ld-powerpc/tlsgd.d: Likewise.
* testsuite/ld-powerpc/tlsie.d: Likewise.
* testsuite/ld-powerpc/tlsld.d: Likewise.
opcodes/
* ppc-dis.c (ppc_opts): Add "power10" entry.
(print_insn_powerpc): Update for PPC_OPCODE_POWER10 renaming.
* ppc-opc.c (POWER10): Rename from POWERXX. Update all uses.
binutils* dwarf.c (do_checks): New global variable.
(display_formatted_table): Warn about an unexpected number of
columns in the table, if checks are enabled. Do not complain
about the lack of data following the number of entries in the
table if the table is empty.
(display_debug_lines_decoded): Only warn about an unexpected
number of columns in a table if checks are enabled.
* dwarf.h (do_checks): Add a prototype.
* elfcomm.c (error): Remove weak attribute.
(warn): Likewise.
* readelf.c (do_checks): Delete.
(warn): Delete.
(process_section_headers): Only warn about empty sections if
checks are enabled.
gas * dwarf2dbg.c (out_dir_and_file_list): Add comments describing the
construction of a DWARF-5 directory name table.
* testsuite/gas/elf/pr25917.d: Update expected output.
PR 25917
* dwarf.c (display_debug_lines_decoded): Warn if encountering a
supicious number of entries for DWARF-5 format directory and file
name tables. Do not display file name table header if the table
is empty. Do not allocate space for empty tables.
This fixes PR 25863 by fixing the condition in the parsing of vmul in
do_mve_vmull. It also simplifies the code in there fixing latent issues that
would lead to NEON code being accepted when it shouldn't.
gas/ChangeLog:
2020-05-04 Andre Vieira <andre.simoesdiasvieira@arm.com>
PR gas/25863
* config/tc-arm.c (do_mve_vmull): Fix scalar and NEON parsing of vmul.
* testsuite/gas/arm/mve-scalar-vmult-it.d: New test.
* testsuite/gas/arm/mve-scalar-vmult-it.s: New test.
PR 25917
* dwarf2dbg.c (out_dir_and_file_list): Check for the directory
table's existence before looking at its entries.
* testsuite/gas/elf/pr25917.s: New test source file.
* testsuite/gas/elf/pr25917.d: New test driver.
* testsuite/gas/elf/elf.exp (run_elf_list_test): Run the new test.
Starting with RH.0 release Xtensa ISA adds immediate parameter to
simcall opcode. For assembly source compatibility treat "simcall"
instruction without parameter as "simcall 0" when parameter is required.
2020-04-29 Max Filippov <jcmvbkbc@gmail.com>
gas/
* config/tc-xtensa.c (XTENSA_MARCH_EARLIEST): Define macro as 0
if it's not defined.
(microarch_earliest): New static variable.
(xg_translate_idioms): Translate "simcall" to "simcall 0" when
simcall opcode has mandatory parameter.
(xg_init_global_config): Initialize microarch_earliest.
PR 22699
opcodes * sh-opc.h (IMM0_8): Replace with IMM0_8S and IMM0_8U. Use
IMM0_8S for arithmetic insns and IMM0_8U for logical insns.
* sh-dis.c (print_insn_sh): Change IMM0_8 case to IMM0_8S and add
IMM0_8U case.
gas * config/tc-sh.c (build_Mytes): Change operand type IMM0_8 to
IMM0_8S and add support for IMM0_8U.
* testsuite/gas/sh/sh4a.s: Add test of a logical insn using an
unsigned 8-bit immediate.
* testsuite/gas/sh/sh4a.d: Extended expected disassembly.
The 64-bit version of binutils got support for the PE COFF BIG OBJ format a
couple of years ago. The BIG OBJ format is a slightly different COFF format
which extends the size of the number of section field in the header from a
uint16_t to a uint32_t and so greatly increases the number of sections allowed.
However the 32-bit version of bfd never got support for this. The GHC Haskell
compiler generates a great deal of symbols due to it's use of
-ffunction-sections and -fdata-sections.
This meant that we could not build the 32-bit version of the GHC Compiler for
many releases now as binutils didn't have this support.
This patch adds the support to the 32-bit port of binutils as well and also does
come cleanup in the code.
bfd/ChangeLog:
* coff-i386.c (COFF_WITH_PE_BIGOBJ): New.
* coff-x86_64.c (COFF_WITH_PE_BIGOBJ): New.
* config.bfd (targ_selvecs): Rename x86_64_pe_be_vec
to x86_64_pe_big_vec as it not a big-endian format.
(vec i386_pe_big_vec): New.
* configure.ac: Likewise.
* targets.c: Likewise.
* configure: Regenerate.
* pe-i386.c (TARGET_SYM_BIG, TARGET_NAME_BIG,
COFF_WITH_PE_BIGOBJ): New.
* pe-x86_64.c (TARGET_SYM_BIG, TARGET_NAME_BIG):
New.
(x86_64_pe_be_vec): Moved.
gas/ChangeLog:
* NEWS: Add news entry for big-obj.
* config/tc-i386.c (i386_target_format): Support new format.
* doc/c-i386.texi: Add i386 support.
* testsuite/gas/pe/big-obj.d: Rename test to not be x64 specific.
* testsuite/gas/pe/pe.exp (big-obj): Make test run on i386 as well.
ld/ChangeLog:
* pe-dll.c (pe_detail_list): Add pe-bigobj-i386.
PR 25878
* dwarf2dbg.c (struct file_entry): Add auto_assigned field.
(assign_file_to_slot): New function. Fills in an entry in the
files table.
(allocate_filenum): Use new function.
(allocate_filename_to_slot): Use new function. If the specified
slot entry is already in use, but was chosen automatically then
reassign the automatic entry.
Introduce new relaxations XTENSA_PDIFF{8,16,32} for positive differences
(subtracted symbol precedes diminished symbol) and XTENSA_NDIFF{8,16,32}
for negative differences (subtracted symbol follows diminished symbol).
Don't generate XTENSA_DIFF relocations in the assembler, generate
XTENSA_PDIFF or XTENSA_NDIFF based on relative symbol position.
Handle XTENSA_DIFF in BFD for compatibility with old object files.
Handle XTENSA_PDIFF and XTENSA_NDIFF in BFD, treating difference value
as unsigned.
2020-04-22 Max Filippov <jcmvbkbc@gmail.com>
bfd/
* bfd-in2.h: Regenerated.
* elf32-xtensa.c (elf_howto_table): New entries for
R_XTENSA_PDIFF{8,16,32} and R_XTENSA_NDIFF{8,16,32}.
(elf_xtensa_reloc_type_lookup, elf_xtensa_do_reloc)
(relax_section): Add cases for R_XTENSA_PDIFF{8,16,32} and
R_XTENSA_NDIFF{8,16,32}.
* libbfd.h (bfd_reloc_code_real_names): Add names for
BFD_RELOC_XTENSA_PDIFF{8,16,32} and
BFD_RELOC_XTENSA_NDIFF{8,16,32}.
* reloc.c: Add documentation for BFD_RELOC_XTENSA_PDIFF{8,16,32}
and BFD_RELOC_XTENSA_NDIFF{8,16,32}.
binutils/
* readelf.c (is_none_reloc): Recognize
BFD_RELOC_XTENSA_PDIFF{8,16,32} and
BFD_RELOC_XTENSA_NDIFF{8,16,32}.
gas/
* config/tc-xtensa.c (md_apply_fix): Replace
BFD_RELOC_XTENSA_DIFF{8,16,32} generation with
BFD_RELOC_XTENSA_PDIFF{8,16,32} and
BFD_RELOC_XTENSA_NDIFF{8,16,32} generation.
* testsuite/gas/xtensa/loc.d: Replace BFD_RELOC_XTENSA_DIFF16
with BFD_RELOC_XTENSA_PDIFF16 in the expected output.
include/
* elf/xtensa.h (elf_xtensa_reloc_type): New entries for
R_XTENSA_PDIFF{8,16,32} and R_XTENSA_NDIFF{8,16,32}.
ld/
* testsuite/ld-xtensa/relax-loc.d: New test definition.
* testsuite/ld-xtensa/relax-loc.s: New test source.
* testsuite/ld-xtensa/xtensa.exp (relax-loc): New test.
* config/obj-elf.c (elf_frob_symbol): Unconditionally remove
symbol for ".symver .. remove".
* doc/as.texi (.symver): Update.
* testsuite/gas/symver/symver11.s: Make foo weak.
* testsuite/gas/symver/symver11.d: Expect an error.
* testsuite/gas/symver/symver7.d: Allow other random symbols.
The MC68000/10 decodes the second operand of CMPI strictly as destination
operand, which disallows PC relative addressing, even though the insn
doesn't write to the operand. This restriction has only been lifted for
the MC68020+ and CPU32.
opcodes:
PR 25848
* m68k-opc.c (m68k_opcodes): Allow pc-rel for second operand of
cmpi only on m68020up and cpu32.
gas:
PR 25848
* testsuite/gas/m68k/operands.s: Add tests for cmpi.
* testsuite/gas/m68k/operands.d: Update.
* testsuite/gas/m68k/op68000.d: Update for new error messages.
The check in bfd_get_full_section_contents is trying to check that we don't
allocate more space for a section than the size of the section is on disk.
Previously we excluded linker created sections since they didn't have a size on
disk. However we also need to exclude sections with no content as well such as
the BSS section. Space for these would not have been allocated by the assembler
and so the check would incorrectly fail.
bfd/ChangeLog:
PR binutils/24753
* compress.c (bfd_get_full_section_contents): Exclude sections with no
content.
gas/ChangeLog:
PR binutils/24753
* testsuite/gas/arm/pr24753.d: New test.
* testsuite/gas/arm/pr24753.s: New test.
Extend .symver directive to update visibility of the original symbol and
assign one original symbol to different versioned symbols:
.symver foo, foo@VERS_1, local # Change foo to a local symbol.
.symver foo, foo@VERS_2, hidden # Change foo to a hidden symbol.
.symver foo, foo@@VERS_3, remove # Remove foo from symbol table.
.symver foo, bar@V1 # Assign foo to bar@V1 and baz@V2.
.symver foo, baz@V2
PR gas/23840
PR gas/25295
* NEWS: Mention .symver extension.
* config/obj-elf.c (obj_elf_find_and_add_versioned_name): New
function.
(obj_elf_symver): Call obj_elf_find_and_add_versioned_name to
add a version name. Add local, hidden and remove visibility
support.
(elf_frob_symbol): Handle the list of version names. Update the
original symbol to local, hidden or remove it from the symbol
table.
(elf_frob_file_before_adjust): Handle the list of version names.
* config/obj-elf.h (elf_visibility): New.
(elf_versioned_name_list): Likewise.
(elf_obj_sy): Change local to bitfield. Add rename, bad_version
and visibility. Change versioned_name pointer to struct
elf_versioned_name_list.
* doc/as.texi: Update .symver directive.
* testsuite/gas/symver/symver.exp: Run all *.d tests. Add more
error checking tests.
* testsuite/gas/symver/symver6.d: New file.
* testsuite/gas/symver/symver7.d: Likewise.
* testsuite/gas/symver/symver7.s: Likewise.
* testsuite/gas/symver/symver8.d: Likewise.
* testsuite/gas/symver/symver8.s: Likewise.
* testsuite/gas/symver/symver9.s: Likewise.
* testsuite/gas/symver/symver9a.d: Likewise.
* testsuite/gas/symver/symver9b.d: Likewise.
* testsuite/gas/symver/symver10.s: Likewise.
* testsuite/gas/symver/symver10a.d: Likewise.
* testsuite/gas/symver/symver10b.d: Likewise.
* testsuite/gas/symver/symver11.d: Likewise.
* testsuite/gas/symver/symver11.s: Likewise.
* testsuite/gas/symver/symver12.d: Likewise.
* testsuite/gas/symver/symver12.s: Likewise.
* testsuite/gas/symver/symver13.d: Likewise.
* testsuite/gas/symver/symver13.s: Likewise.
* testsuite/gas/symver/symver14.d: Likewise.
* testsuite/gas/symver/symver14.l: Likewise.
* testsuite/gas/symver/symver15.d: Likewise.
* testsuite/gas/symver/symver15.l: Likewise.
* testsuite/gas/symver/symver6.l: Removed.
* testsuite/gas/symver/symver6.s: Updated.
This patch implements the TSB instructions:
https://developer.arm.com/docs/ddi0596/f/base-instructions-alphabetic-order/
tsb-csync-trace-synchronization-barrier
Since TSB and PSB both use the same (and only) argument "CSYNC", this patch
reuses it for TSB. However, the same argument would imply different value
for CRm:Op2 which are anyway fixed values, so I have diverted the
inserter/extracter function to dummy versions instead of the "hint" version.
The operand checker part still uses the existing infratructure for
AARCH64_OPND_BARRIER_PSB to make sure the operand is parsed correctly.
gas/ChangeLog:
2020-04-20 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_barrier_psb): Update error messages
to include TSB.
* testsuite/gas/aarch64/system-2.d: Update -march and new tsb tests.
* testsuite/gas/aarch64/system-2.s: Add new tsb tests.
* testsuite/gas/aarch64/system.d: Update.
opcodes/ChangeLog:
2020-04-20 Sudakshina Das <sudi.das@arm.com>
* aarch64-asm.c (aarch64_ins_none): New.
* aarch64-asm.h (ins_none): New declaration.
* aarch64-dis.c (aarch64_ext_none): New.
* aarch64-dis.h (ext_none): New declaration.
* aarch64-opc.c (aarch64_print_operand): Update case for
AARCH64_OPND_BARRIER_PSB.
* aarch64-tbl.h (aarch64_opcode_table): Add tsb.
(AARCH64_OPERANDS): Update inserter/extracter for
AARCH64_OPND_BARRIER_PSB to use new dummy functions.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
There are a few instruction in AArch64 that are in the HINT space. Any of
these instructions should be accepted by the assembler/disassembler at any
architecture version. This patch fixes the existing instructions that are
not behaving accordingly.
I have used all of the instructions mentioned in the following to make the
changes:
https://developer.arm.com/docs/ddi0596/f/base-instructions-alphabetic-order/
hint-hint-instruction
gas/ChangeLog:
2020-04-20 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/bti.d: Update -march option.
* testsuite/gas/aarch64/illegal-bti.d: Remove.
* testsuite/gas/aarch64/illegal-bti.l: Remove.
* testsuite/gas/aarch64/illegal-ras-1.l: Remove esb.
* testsuite/gas/aarch64/illegal-ras-1.s: Remove esb.
opcodes/ChangeLog:
2020-04-20 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (aarch64_feature_bti, BTI, BTI_INSN): Remove.
(aarch64_feature_ras, RAS): Likewise.
(aarch64_feature_stat_profile, STAT_PROFILE): Likewise.
(aarch64_opcode_table): Update bti, xpaclri, pacia1716, pacib1716,
autia1716, autib1716, esb, psb, dgh, paciaz, paciasp, pacibz, pacibsp,
autiaz, autiasp, autibz, autibsp to be CORE_INSN.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
BFIN has lots of instructions that contain "=", so "sym = expression"
is disabled for that target. This makes an exception for assignment
to dot, fixing the recent regression of ld-scripts/pr18963.
* config/tc-bfin.h (TC_EQUAL_IN_INSN): Allow assignment to dot.
PR 25803
gas * config/obj-elf.c (obj_elf_type): Reject ifunc symbols on MIPS
targets.
* testsuite/gas/elf/elf.exp: Add MIPS targets to the list to skip
for the type-2 test.
* testsuite/gas/elf/type-noifunc.e: Update to allow for MIPS
targets running this test.
bfd * elfxx-mips.c (_bfd_mips_elf_adjust_dynamic_symbol): Replace an
abort with a more helpful error message.
Add support for the JMP32 class of eBPF instructions.
cpu/ChangeLog
* bpf.cpu (define-cond-jump-insn): Renamed from djci.
(dcji) New version with support for JMP32
gas/ChangeLog
* testsuite/gas/bpf/bpf.exp: Run jump32 tests.
* testsuite/gas/bpf/jump32.s: New file.
* testsuite/gas/bpf/jump32.d: Likewise.
opcodes/ChangeLog
* bpf-desc.c: Regenerate.
* bpf-desc.h: Likewise.
* bpf-opc.c: Regenerate.
* bpf-opc.h: Likewise.
The m32c target header has a duplicate entry for MD_PCREL_FROM_SECTION.
The duplication was present since the initial commit of the port.
* config/tc-m32c.h (MD_PCREL_FROM_SECTION): Delete duplicate define.
(md_pcrel_from_section): Remove duplicate prototype.
The moxie target header uses md_pcrel_from, thus the local prototype and
the macro definition for MD_PCREL_FROM_SECTION are not needed.
* config/tc-moxie.h (MD_PCREL_FROM_SECTION): Delete define.
(md_pcrel_from): Remove prototytpe.
Fix
gas/doc/c-z80.texi:244: warning: `.' or `,' must follow @xref, not )
gas/doc/c-z80.texi:278: warning: `.' or `,' must follow @xref, not )
gas/doc/c-z80.texi:284: warning: `.' or `,' must follow @xref, not )
gas/doc/c-z80.texi:291: warning: `.' or `,' must follow @xref, not )
gas/doc/c-z80.texi:295: warning: `.' or `,' must follow @xref, not )
* doc/c-z80.texi: Fix @xref warnings.
