This patch adds support for a subset of the ARMv8.3 pointer authentication
instructions: XPACLRI, PACIA1716, PACIB1716, AUTIA1716, AUTIA1716, PACIAZ,
PACIASP, PACIBZ, PACISP, AUTIAZ, AUTIASP, AUTIBZ, AUTIBSP.
These are aliases to HINT #0x7, HINT #0x8, HINT #0xa, HINT #0xc, HINT #0xe,
HINT #0x18, HINT #0x19, ..., HINT #0x1f respectively.
For more details about pointer authentication in ARMv8.3 see
https://community.arm.com/groups/processors/blog/2016/10/27/armv8-a-architecture-2016-additions
opcodes/
2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com>
* aarch64-tbl.h (aarch64_feature_v8_3, ARMV8_3, V8_3_INSN): New.
(arch64_opcode_table): Add xpaclri, pacia1716, pacib1716, autia1716,
autib1716, paciaz, paciasp, pacibz, pacibsp, autiaz, autiasp, autibz,
autibsp.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
gas/
2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com>
* testsuite/gas/aarch64/system-3.s: New.
* testsuite/gas/aarch64/system-3.d: New.
* testsuite/gas/aarch64/system.d: Update expected output.
SVE uses some new fields to store W, X and scalar FP registers.
This patch adds corresponding operands.
include/
* opcode/aarch64.h (AARCH64_OPND_SVE_Rm): New aarch64_opnd.
(AARCH64_OPND_SVE_Rn_SP, AARCH64_OPND_SVE_VZn, AARCH64_OPND_SVE_Vd)
(AARCH64_OPND_SVE_Vm, AARCH64_OPND_SVE_Vn): Likewise.
opcodes/
* aarch64-tbl.h (AARCH64_OPERANDS): Add entries for the new SVE core
and FP register operands.
* aarch64-opc.h (FLD_SVE_Rm, FLD_SVE_Rn, FLD_SVE_Vd, FLD_SVE_Vm)
(FLD_SVE_Vn): New aarch64_field_kinds.
* aarch64-opc.c (fields): Add corresponding entries.
(aarch64_print_operand): Handle the new SVE core and FP register
operands.
* aarch64-opc-2.c: Regenerate.
* aarch64-asm-2.c: Likewise.
* aarch64-dis-2.c: Likewise.
gas/
* config/tc-aarch64.c (parse_operands): Handle the new SVE core
and FP register operands.
This patch adds support for the new SVE floating-point immediate
operands. One operand uses the same 8-bit encoding as base AArch64,
but in a different position. The others use a single bit to select
between two values.
One of the single-bit operands is a choice between 0 and 1, where 0
is not a valid 8-bit encoding. I think the cleanest way of handling
these single-bit immediates is therefore to use the IEEE float encoding
itself as the immediate value and select between the two possible values
when encoding and decoding.
As described in the covering note for the patch that added F_STRICT,
we get better error messages by accepting unsuffixed vector registers
and leaving the qualifier matching code to report an error. This means
that we carry on parsing the other operands, and so can try to parse FP
immediates for invalid instructions like:
fcpy z0, #2.5
In this case there is no suffix to tell us whether the immediate should
be treated as single or double precision. Again, we get better error
messages by picking one (arbitrary) immediate size and reporting an error
for the missing suffix later.
include/
* opcode/aarch64.h (AARCH64_OPND_SVE_FPIMM8): New aarch64_opnd.
(AARCH64_OPND_SVE_I1_HALF_ONE, AARCH64_OPND_SVE_I1_HALF_TWO)
(AARCH64_OPND_SVE_I1_ZERO_ONE): Likewise.
opcodes/
* aarch64-tbl.h (AARCH64_OPERANDS): Add entries for the new SVE FP
immediate operands.
* aarch64-opc.h (FLD_SVE_i1): New aarch64_field_kind.
* aarch64-opc.c (fields): Add corresponding entry.
(operand_general_constraint_met_p): Handle the new SVE FP immediate
operands.
(aarch64_print_operand): Likewise.
* aarch64-opc-2.c: Regenerate.
* aarch64-asm.h (ins_sve_float_half_one, ins_sve_float_half_two)
(ins_sve_float_zero_one): New inserters.
* aarch64-asm.c (aarch64_ins_sve_float_half_one): New function.
(aarch64_ins_sve_float_half_two): Likewise.
(aarch64_ins_sve_float_zero_one): Likewise.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis.h (ext_sve_float_half_one, ext_sve_float_half_two)
(ext_sve_float_zero_one): New extractors.
* aarch64-dis.c (aarch64_ext_sve_float_half_one): New function.
(aarch64_ext_sve_float_half_two): Likewise.
(aarch64_ext_sve_float_zero_one): Likewise.
* aarch64-dis-2.c: Regenerate.
gas/
* config/tc-aarch64.c (double_precision_operand_p): New function.
(parse_operands): Use it to calculate the dp_p input to
parse_aarch64_imm_float. Handle the new SVE FP immediate operands.
This patch adds the new SVE integer immediate operands. There are
three kinds:
- simple signed and unsigned ranges, but with new widths and positions.
- 13-bit logical immediates. These have the same form as in base AArch64,
but at a different bit position.
In the case of the "MOV Zn.<T>, #<limm>" alias of DUPM, the logical
immediate <limm> is not allowed to be a valid DUP immediate, since DUP
is preferred over DUPM for constants that both instructions can handle.
- a new 9-bit arithmetic immediate, of the form "<imm8>{, LSL #8}".
In some contexts the operand is signed and in others it's unsigned.
As an extension, we allow shifted immediates to be written as a single
integer, e.g. "#256" is equivalent to "#1, LSL #8". We also use the
shiftless form as the preferred disassembly, except for the special
case of "#0, LSL #8" (a redundant encoding of 0).
include/
* opcode/aarch64.h (AARCH64_OPND_SIMM5): New aarch64_opnd.
(AARCH64_OPND_SVE_AIMM, AARCH64_OPND_SVE_ASIMM)
(AARCH64_OPND_SVE_INV_LIMM, AARCH64_OPND_SVE_LIMM)
(AARCH64_OPND_SVE_LIMM_MOV, AARCH64_OPND_SVE_SHLIMM_PRED)
(AARCH64_OPND_SVE_SHLIMM_UNPRED, AARCH64_OPND_SVE_SHRIMM_PRED)
(AARCH64_OPND_SVE_SHRIMM_UNPRED, AARCH64_OPND_SVE_SIMM5)
(AARCH64_OPND_SVE_SIMM5B, AARCH64_OPND_SVE_SIMM6)
(AARCH64_OPND_SVE_SIMM8, AARCH64_OPND_SVE_UIMM3)
(AARCH64_OPND_SVE_UIMM7, AARCH64_OPND_SVE_UIMM8)
(AARCH64_OPND_SVE_UIMM8_53): Likewise.
(aarch64_sve_dupm_mov_immediate_p): Declare.
opcodes/
* aarch64-tbl.h (AARCH64_OPERANDS): Add entries for the new SVE
integer immediate operands.
* aarch64-opc.h (FLD_SVE_immN, FLD_SVE_imm3, FLD_SVE_imm5)
(FLD_SVE_imm5b, FLD_SVE_imm7, FLD_SVE_imm8, FLD_SVE_imm9)
(FLD_SVE_immr, FLD_SVE_imms, FLD_SVE_tszh): New aarch64_field_kinds.
* aarch64-opc.c (fields): Add corresponding entries.
(operand_general_constraint_met_p): Handle the new SVE integer
immediate operands.
(aarch64_print_operand): Likewise.
(aarch64_sve_dupm_mov_immediate_p): New function.
* aarch64-opc-2.c: Regenerate.
* aarch64-asm.h (ins_inv_limm, ins_sve_aimm, ins_sve_asimm)
(ins_sve_limm_mov, ins_sve_shlimm, ins_sve_shrimm): New inserters.
* aarch64-asm.c (aarch64_ins_limm_1): New function, split out from...
(aarch64_ins_limm): ...here.
(aarch64_ins_inv_limm): New function.
(aarch64_ins_sve_aimm): Likewise.
(aarch64_ins_sve_asimm): Likewise.
(aarch64_ins_sve_limm_mov): Likewise.
(aarch64_ins_sve_shlimm): Likewise.
(aarch64_ins_sve_shrimm): Likewise.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis.h (ext_inv_limm, ext_sve_aimm, ext_sve_asimm)
(ext_sve_limm_mov, ext_sve_shlimm, ext_sve_shrimm): New extractors.
* aarch64-dis.c (decode_limm): New function, split out from...
(aarch64_ext_limm): ...here.
(aarch64_ext_inv_limm): New function.
(decode_sve_aimm): Likewise.
(aarch64_ext_sve_aimm): Likewise.
(aarch64_ext_sve_asimm): Likewise.
(aarch64_ext_sve_limm_mov): Likewise.
(aarch64_top_bit): Likewise.
(aarch64_ext_sve_shlimm): Likewise.
(aarch64_ext_sve_shrimm): Likewise.
* aarch64-dis-2.c: Regenerate.
gas/
* config/tc-aarch64.c (parse_operands): Handle the new SVE integer
immediate operands.
This patch adds support for addresses of the form:
[<base>, #<offset>, MUL VL]
This involves adding a new AARCH64_MOD_MUL_VL modifier, which is
why I split it out from the other addressing modes.
For LD2, LD3 and LD4, the offset must be a multiple of the structure
size, so for LD3 the possible values are 0, 3, 6, .... The patch
therefore extends value_aligned_p to handle non-power-of-2 alignments.
include/
* opcode/aarch64.h (AARCH64_OPND_SVE_ADDR_RI_S4xVL): New aarch64_opnd.
(AARCH64_OPND_SVE_ADDR_RI_S4x2xVL, AARCH64_OPND_SVE_ADDR_RI_S4x3xVL)
(AARCH64_OPND_SVE_ADDR_RI_S4x4xVL, AARCH64_OPND_SVE_ADDR_RI_S6xVL)
(AARCH64_OPND_SVE_ADDR_RI_S9xVL): Likewise.
(AARCH64_MOD_MUL_VL): New aarch64_modifier_kind.
opcodes/
* aarch64-tbl.h (AARCH64_OPERANDS): Add entries for new MUL VL
operands.
* aarch64-opc.c (aarch64_operand_modifiers): Initialize
the AARCH64_MOD_MUL_VL entry.
(value_aligned_p): Cope with non-power-of-two alignments.
(operand_general_constraint_met_p): Handle the new MUL VL addresses.
(print_immediate_offset_address): Likewise.
(aarch64_print_operand): Likewise.
* aarch64-opc-2.c: Regenerate.
* aarch64-asm.h (ins_sve_addr_ri_s4xvl, ins_sve_addr_ri_s6xvl)
(ins_sve_addr_ri_s9xvl): New inserters.
* aarch64-asm.c (aarch64_ins_sve_addr_ri_s4xvl): New function.
(aarch64_ins_sve_addr_ri_s6xvl): Likewise.
(aarch64_ins_sve_addr_ri_s9xvl): Likewise.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis.h (ext_sve_addr_ri_s4xvl, ext_sve_addr_ri_s6xvl)
(ext_sve_addr_ri_s9xvl): New extractors.
* aarch64-dis.c (aarch64_ext_sve_addr_reg_mul_vl): New function.
(aarch64_ext_sve_addr_ri_s4xvl): Likewise.
(aarch64_ext_sve_addr_ri_s6xvl): Likewise.
(aarch64_ext_sve_addr_ri_s9xvl): Likewise.
* aarch64-dis-2.c: Regenerate.
gas/
* config/tc-aarch64.c (SHIFTED_NONE, SHIFTED_MUL_VL): New
parse_shift_modes.
(parse_shift): Handle SHIFTED_MUL_VL.
(parse_address_main): Add an imm_shift_mode parameter.
(parse_address, parse_sve_address): Update accordingly.
(parse_operands): Handle MUL VL addressing modes.
This patch adds most of the new SVE addressing modes and associated
operands. A follow-on patch adds MUL VL, since handling it separately
makes the changes easier to read.
The patch also introduces a new "operand-dependent data" field to the
operand flags, based closely on the existing one for opcode flags.
For SVE this new field needs only 2 bits, but it could be widened
in future if necessary.
include/
* opcode/aarch64.h (AARCH64_OPND_SVE_ADDR_RI_U6): New aarch64_opnd.
(AARCH64_OPND_SVE_ADDR_RI_U6x2, AARCH64_OPND_SVE_ADDR_RI_U6x4)
(AARCH64_OPND_SVE_ADDR_RI_U6x8, AARCH64_OPND_SVE_ADDR_RR)
(AARCH64_OPND_SVE_ADDR_RR_LSL1, AARCH64_OPND_SVE_ADDR_RR_LSL2)
(AARCH64_OPND_SVE_ADDR_RR_LSL3, AARCH64_OPND_SVE_ADDR_RX)
(AARCH64_OPND_SVE_ADDR_RX_LSL1, AARCH64_OPND_SVE_ADDR_RX_LSL2)
(AARCH64_OPND_SVE_ADDR_RX_LSL3, AARCH64_OPND_SVE_ADDR_RZ)
(AARCH64_OPND_SVE_ADDR_RZ_LSL1, AARCH64_OPND_SVE_ADDR_RZ_LSL2)
(AARCH64_OPND_SVE_ADDR_RZ_LSL3, AARCH64_OPND_SVE_ADDR_RZ_XTW_14)
(AARCH64_OPND_SVE_ADDR_RZ_XTW_22, AARCH64_OPND_SVE_ADDR_RZ_XTW1_14)
(AARCH64_OPND_SVE_ADDR_RZ_XTW1_22, AARCH64_OPND_SVE_ADDR_RZ_XTW2_14)
(AARCH64_OPND_SVE_ADDR_RZ_XTW2_22, AARCH64_OPND_SVE_ADDR_RZ_XTW3_14)
(AARCH64_OPND_SVE_ADDR_RZ_XTW3_22, AARCH64_OPND_SVE_ADDR_ZI_U5)
(AARCH64_OPND_SVE_ADDR_ZI_U5x2, AARCH64_OPND_SVE_ADDR_ZI_U5x4)
(AARCH64_OPND_SVE_ADDR_ZI_U5x8, AARCH64_OPND_SVE_ADDR_ZZ_LSL)
(AARCH64_OPND_SVE_ADDR_ZZ_SXTW, AARCH64_OPND_SVE_ADDR_ZZ_UXTW):
Likewise.
opcodes/
* aarch64-tbl.h (AARCH64_OPERANDS): Add entries for the new SVE
address operands.
* aarch64-opc.h (FLD_SVE_imm6, FLD_SVE_msz, FLD_SVE_xs_14)
(FLD_SVE_xs_22): New aarch64_field_kinds.
(OPD_F_OD_MASK, OPD_F_OD_LSB, OPD_F_NO_ZR): New flags.
(get_operand_specific_data): New function.
* aarch64-opc.c (fields): Add entries for FLD_SVE_imm6, FLD_SVE_msz,
FLD_SVE_xs_14 and FLD_SVE_xs_22.
(operand_general_constraint_met_p): Handle the new SVE address
operands.
(sve_reg): New array.
(get_addr_sve_reg_name): New function.
(aarch64_print_operand): Handle the new SVE address operands.
* aarch64-opc-2.c: Regenerate.
* aarch64-asm.h (ins_sve_addr_ri_u6, ins_sve_addr_rr_lsl)
(ins_sve_addr_rz_xtw, ins_sve_addr_zi_u5, ins_sve_addr_zz_lsl)
(ins_sve_addr_zz_sxtw, ins_sve_addr_zz_uxtw): New inserters.
* aarch64-asm.c (aarch64_ins_sve_addr_ri_u6): New function.
(aarch64_ins_sve_addr_rr_lsl): Likewise.
(aarch64_ins_sve_addr_rz_xtw): Likewise.
(aarch64_ins_sve_addr_zi_u5): Likewise.
(aarch64_ins_sve_addr_zz): Likewise.
(aarch64_ins_sve_addr_zz_lsl): Likewise.
(aarch64_ins_sve_addr_zz_sxtw): Likewise.
(aarch64_ins_sve_addr_zz_uxtw): Likewise.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis.h (ext_sve_addr_ri_u6, ext_sve_addr_rr_lsl)
(ext_sve_addr_rz_xtw, ext_sve_addr_zi_u5, ext_sve_addr_zz_lsl)
(ext_sve_addr_zz_sxtw, ext_sve_addr_zz_uxtw): New extractors.
* aarch64-dis.c (aarch64_ext_sve_add_reg_imm): New function.
(aarch64_ext_sve_addr_ri_u6): Likewise.
(aarch64_ext_sve_addr_rr_lsl): Likewise.
(aarch64_ext_sve_addr_rz_xtw): Likewise.
(aarch64_ext_sve_addr_zi_u5): Likewise.
(aarch64_ext_sve_addr_zz): Likewise.
(aarch64_ext_sve_addr_zz_lsl): Likewise.
(aarch64_ext_sve_addr_zz_sxtw): Likewise.
(aarch64_ext_sve_addr_zz_uxtw): Likewise.
* aarch64-dis-2.c: Regenerate.
gas/
* config/tc-aarch64.c (REG_TYPE_SVE_BASE, REG_TYPE_SVE_OFFSET): New
register types.
(get_reg_expected_msg): Handle them.
(aarch64_addr_reg_parse): New function, split out from
aarch64_reg_parse_32_64. Handle Z registers too.
(aarch64_reg_parse_32_64): Call it.
(parse_address_main): Add base_qualifier, offset_qualifier,
base_type and offset_type parameters. Handle SVE base and offset
registers.
(parse_address): Update call to parse_address_main.
(parse_sve_address): New function.
(parse_operands): Parse the new SVE address operands.
Some SVE instructions count the number of elements in a given vector
pattern and allow a scale factor of [1, 16] to be applied to the result.
This scale factor is written ", MUL #n", where "MUL" is a new operator.
E.g.:
UQINCD X0, POW2, MUL #2
This patch adds support for this kind of operand.
All existing operators were shifts of some kind, so there was a natural
range of [0, 63] regardless of context. This was then narrowered further
by later checks (e.g. to [0, 31] when used for 32-bit values).
In contrast, MUL doesn't really have a natural context-independent range.
Rather than pick one arbitrarily, it seemed better to make the "shift"
amount a full 64-bit value and leave the range test to the usual
operand-checking code. I've rearranged the fields of aarch64_opnd_info
so that this doesn't increase the size of the structure (although I don't
think its size is critical anyway).
include/
* opcode/aarch64.h (AARCH64_OPND_SVE_PATTERN_SCALED): New
aarch64_opnd.
(AARCH64_MOD_MUL): New aarch64_modifier_kind.
(aarch64_opnd_info): Make shifter.amount an int64_t and
rearrange the fields.
opcodes/
* aarch64-tbl.h (AARCH64_OPERANDS): Add an entry for
AARCH64_OPND_SVE_PATTERN_SCALED.
* aarch64-opc.h (FLD_SVE_imm4): New aarch64_field_kind.
* aarch64-opc.c (fields): Add a corresponding entry.
(set_multiplier_out_of_range_error): New function.
(aarch64_operand_modifiers): Add entry for AARCH64_MOD_MUL.
(operand_general_constraint_met_p): Handle
AARCH64_OPND_SVE_PATTERN_SCALED.
(print_register_offset_address): Use PRIi64 to print the
shift amount.
(aarch64_print_operand): Likewise. Handle
AARCH64_OPND_SVE_PATTERN_SCALED.
* aarch64-opc-2.c: Regenerate.
* aarch64-asm.h (ins_sve_scale): New inserter.
* aarch64-asm.c (aarch64_ins_sve_scale): New function.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis.h (ext_sve_scale): New inserter.
* aarch64-dis.c (aarch64_ext_sve_scale): New function.
* aarch64-dis-2.c: Regenerate.
gas/
* config/tc-aarch64.c (SHIFTED_MUL): New parse_shift_mode.
(parse_shift): Handle it. Reject AARCH64_MOD_MUL for all other
shift modes. Skip range tests for AARCH64_MOD_MUL.
(process_omitted_operand): Handle AARCH64_OPND_SVE_PATTERN_SCALED.
(parse_operands): Likewise.
The SVE instructions have two enumerated operands: one to select a
vector pattern and another to select a prefetch operation. The latter
is a cut-down version of the base AArch64 prefetch operation.
Both types of operand can also be specified as raw enum values such as #31.
Reserved values can only be specified this way.
If it hadn't been for the pattern operand, I would have been tempted
to use the existing parsing for prefetch operations and add extra
checks for SVE. However, since the patterns needed new enum parsing
code anyway, it seeemed cleaner to reuse it for the prefetches too.
Because of the small number of enum values, I don't think we'd gain
anything by using hash tables.
include/
* opcode/aarch64.h (AARCH64_OPND_SVE_PATTERN): New aarch64_opnd.
(AARCH64_OPND_SVE_PRFOP): Likewise.
(aarch64_sve_pattern_array): Declare.
(aarch64_sve_prfop_array): Likewise.
opcodes/
* aarch64-tbl.h (AARCH64_OPERANDS): Add entries for
AARCH64_OPND_SVE_PATTERN and AARCH64_OPND_SVE_PRFOP.
* aarch64-opc.h (FLD_SVE_pattern): New aarch64_field_kind.
(FLD_SVE_prfop): Likewise.
* aarch64-opc.c: Include libiberty.h.
(aarch64_sve_pattern_array): New variable.
(aarch64_sve_prfop_array): Likewise.
(fields): Add entries for FLD_SVE_pattern and FLD_SVE_prfop.
(aarch64_print_operand): Handle AARCH64_OPND_SVE_PATTERN and
AARCH64_OPND_SVE_PRFOP.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Likewise.
* aarch64-opc-2.c: Likewise.
gas/
* config/tc-aarch64.c (parse_enum_string): New function.
(po_enum_or_fail): New macro.
(parse_operands): Handle AARCH64_OPND_SVE_PATTERN and
AARCH64_OPND_SVE_PRFOP.
This patch adds the Zn and Pn registers, and associated fields and
operands.
include/
* opcode/aarch64.h (AARCH64_OPND_CLASS_SVE_REG): New
aarch64_operand_class.
(AARCH64_OPND_CLASS_PRED_REG): Likewise.
(AARCH64_OPND_SVE_Pd, AARCH64_OPND_SVE_Pg3, AARCH64_OPND_SVE_Pg4_5)
(AARCH64_OPND_SVE_Pg4_10, AARCH64_OPND_SVE_Pg4_16)
(AARCH64_OPND_SVE_Pm, AARCH64_OPND_SVE_Pn, AARCH64_OPND_SVE_Pt)
(AARCH64_OPND_SVE_Za_5, AARCH64_OPND_SVE_Za_16, AARCH64_OPND_SVE_Zd)
(AARCH64_OPND_SVE_Zm_5, AARCH64_OPND_SVE_Zm_16, AARCH64_OPND_SVE_Zn)
(AARCH64_OPND_SVE_Zn_INDEX, AARCH64_OPND_SVE_ZnxN)
(AARCH64_OPND_SVE_Zt, AARCH64_OPND_SVE_ZtxN): New aarch64_opnds.
opcodes/
* aarch64-tbl.h (AARCH64_OPERANDS): Add entries for new SVE operands.
* aarch64-opc.h (FLD_SVE_Pd, FLD_SVE_Pg3, FLD_SVE_Pg4_5)
(FLD_SVE_Pg4_10, FLD_SVE_Pg4_16, FLD_SVE_Pm, FLD_SVE_Pn, FLD_SVE_Pt)
(FLD_SVE_Za_5, FLD_SVE_Za_16, FLD_SVE_Zd, FLD_SVE_Zm_5, FLD_SVE_Zm_16)
(FLD_SVE_Zn, FLD_SVE_Zt, FLD_SVE_tzsh): New aarch64_field_kinds.
* aarch64-opc.c (fields): Add corresponding entries here.
(operand_general_constraint_met_p): Check that SVE register lists
have the correct length. Check the ranges of SVE index registers.
Check for cases where p8-p15 are used in 3-bit predicate fields.
(aarch64_print_operand): Handle the new SVE operands.
* aarch64-opc-2.c: Regenerate.
* aarch64-asm.h (ins_sve_index, ins_sve_reglist): New inserters.
* aarch64-asm.c (aarch64_ins_sve_index): New function.
(aarch64_ins_sve_reglist): Likewise.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis.h (ext_sve_index, ext_sve_reglist): New extractors.
* aarch64-dis.c (aarch64_ext_sve_index): New function.
(aarch64_ext_sve_reglist): Likewise.
* aarch64-dis-2.c: Regenerate.
gas/
* config/tc-aarch64.c (NTA_HASVARWIDTH): New macro.
(AARCH64_REG_TYPES): Add ZN and PN.
(get_reg_expected_msg): Handle them.
(parse_vector_type_for_operand): Add a reg_type parameter.
Skip the width for Zn and Pn registers.
(parse_typed_reg): Extend vector handling to Zn and Pn. Update the
call to parse_vector_type_for_operand. Set HASVARTYPE for Zn and Pn,
expecting the width to be 0.
(parse_vector_reg_list): Restrict error about [BHSD]nn operands to
REG_TYPE_VN.
(vectype_to_qualifier): Use S_[BHSD] qualifiers for NTA_HASVARWIDTH.
(parse_operands): Handle the new Zn and Pn operands.
(REGSET16): New macro, split out from...
(REGSET31): ...here.
(reg_names): Add Zn and Pn entries.
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch extends
instructions in the group Adv.SIMD Scalar Shift By Immediate to support
FP16, making this support available when +simd+fp16 is enabled.
The extended instructions are: SCVTF, FCVTZS, UCVTF and FCVTZU.
The general form for these instructions is
<OP> <Hd>, <Hs>, #<imm>
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16: Add tests for Adv.SIMD scalar shift
by immediate instructions.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (QL_SSHIFT_H): New.
(aarch64_opcode_table): Add fp16 versions of scvtf, fcvtzs, ucvtf
and fcvtzu to the Adv.SIMD scalar shift by immediate group.
Change-Id: I40506496f52dd96909e7344f243b38a1870df7ff
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch extends
instructions in the group Adv.SIMD Shift By Immediate to support FP16,
making this support available when +simd+fp16 is enabled.
The new instructions legal make some uses of the 4h vector type that had
been invalid. This patch adjusts a test that checks for these uses.
The extended instructions are: SCVTF, FCVTZS, UCVTF and FCVTZU.
The general form for these instructions is
<OP> <Vd>.<T>, <Vs>.<T>, #<imm>
where T is 4h or 8h.
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16.s: Add tests for Adv.SIMD across lanes
instructions.
* gas/aarch64/illegal.d: Update expected output.
* gas/aarch64/illegal.s: Replace tests for illegal use of 'h'
specifier.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (QL_VSHIFT_H): New.
(aarch64_opcode_table): Add fp16 versions of scvtf, fcvtzs, ucvtf
and fcvtzu to the Adv.SIMD shift by immediate group.
Change-Id: I3480f63883d54db46562573185da6982f2365ee8
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch adds FP16
instructions to the group Adv.SIMD Scalar Pairwise, making them
available when +simd+fp16 is enabled.
The instructions added are: FMAXNMP, FADDP, FMAXP, FMINNMP and FMINP
The general form for these instructions is
<OP> <Hd>, <V>.<T>
where T is 4h or 8h.
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16.s: Add tests for Adv.SIMD Scalar
Pairwise instructions.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (QL_SISD_PAIR_H): New.
(aarch64_opcode_table): Add fp16 versions of fmaxnmp, faddp,
fmaxp, fminnmp, fminp to the Adv.SIMD scalar pairwise group.
Change-Id: I19937ede3441b66dd0f940269ece895b17d3c345
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch adds an FP16
instruction to the group Adv.SIMD Modified Immediate, making it
available when +simd+fp16 is enabled.
The instruction added is: FMOV.
The form of this instructions is
<OP> <Hd>, #<imm>
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16.s: Add tests for Adv.SIMD modified immediate
instructions.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (QL_SIMD_IMM_H): New.
(aarch64_opcode_table): Add fp16 version of fmov to the Adv.SIMD
modified immediate group.
Change-Id: Ic66af44c494e6a53fb1cf01c372cdc62d12643e2
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch adds FP16
instructions to the group Adv.SIMD Across Lanes, making them available
when +simd+fp16 is enabled.
The instructions added are: FMAXNMV, FMAXV, FMINNMV and FMINV.
The general form for these instructions is
<OP> <Hd>, <V>.<T>
where T is 4h or 8h.
The new instructions valid make uses of the 8H and 4H that were
previously illegal. The patch adjusts a test for illegal uses of vector
types to take this into account.
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16.s: Add tests for Adv.SIMD across lanes
instructions.
* gas/aarch64/illegal.d: Update expected output.
* gas/aarch64/illegal.s: Replace test for illegal use of 'h'
specifier.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (QL_XLANES_FP_H): New.
(aarch64_opcode_table): Add fp16 versions of fmaxnmv, fmaxv,
fminnmv, fminv to the Adv.SIMD across lanes group.
Change-Id: Ib9a47e867f55e0272c2446eb7e16837503d2f94c
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch adds FP16
instructions to the group Scalar Indexed Element, making them available
when +simd+fp16 is enabled.
The instructions added are: FMLA, FMLS, FMUL and FMULX.
The general form for these instructions is
<OP> <Hd>, <Hs>, <V>.h[<idx>]
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16.s: Add tests for scalar indexed element
instructions.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (aarch64_opcode_table): Add fp16 versions of fmla,
fmls, fmul and fmulx to the scalar indexed element group.
Change-Id: I6a4ee20a9ae1019b89d0fd05da55222f267c5627
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch adds FP16
instructions to the group Vector Indexed Element, making them available
when +simd+fp16 is enabled.
The instructions added are: FMLA, FMLS, FMUL and FMULX.
The general form for these instructions is
<OP> <V>.<T>, <V>.<T>, <V>.h[<idx>]
where T is 4h or 8h
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16.s: Add tests for vector indexed element
instructions.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (QL_ELEMENT_FP_H): New.
(aarch64_opcode_table): Add fp16 versions of fmla, fmls, fmul and
fmulx to the vector indexed element group.
Change-Id: Ib70cd4eaa6ea2938f84ac41f31d72644dbb0ceb4
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch adds FP16
instructions to the group Scalar Two Register Misc, making them
available when +simd+fp16 is enabled.
The instructions added are: FCMGT, FCMGE, FCMEQ, FCMLE, FCMLT, FCVTNS,
FCVTNU, FCVTPS, FCVTPU, FCVTMS, FCVTMU, FCVTZS, FCVTZU, FCVTAS, FCVTAU,
SCVTF, UCVTF, FRECPE, FRSQRTE and FRECPX.
The general form for these instructions is
<OP> <Hd>, <Hs>
or
<OP> <Hd>, <Hs>, #0.0
Tested the series for aarch64-none-linux-gnu with cross-compiled
check-binutils and check-gas.
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16.s: Add tests for scalar two register misc.
instructions.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (QL_SISD_FCMP_H_0): new.
(QL_S_2SAMEH): New.
(aarch64_opcode_table): Add fp16 versions of fcvtns, fcvtms,
fcvtas, scvtf, fcmgt, fcmeq, fcmlt, fcvtps, fcvtzs, frecpe,
frecpx, fcvtnu, fcvtmu, fcvtau, ucvtf, fcmge, fcmle, fcvtpu,
fcvtzu and frsqrte to the scalar two register misc. group.
Change-Id: I19b25baae33027ce1bade68cc8dc47a4321d045c
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch adds FP16
instructions to the group Vector Two Register Misc, making them
available when +simd+fp16 is enabled.
The instructions added are: FCMGT, FCMGE, FCMEQ, FCMLE, FCMLT, FABS,
FNEG, FRINTN, FRINTA, FRINTP, FRINTM, FRINTX, FRINTZ, FRINTI, FCVTNS,
FCVTNU, FCVTPS, FCVTPU, FCVTMS, FCVTMU, FCVTZS, FCVTZU, FCVTAS, FCVTAU,
SCVTF, UCVTF, FRECPE, FRSQRTE and FSQRT.
The general form for these instructions is
<OP> <Vd>.<T>, <Vs>.<T>
where T is 4h or 8h.
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16.s: Add tests for vector two register misc.
instructions.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (QL_V2SAMEH): New.
(aarch64_opcode_table): Add fp16 versions of frintn, frintm,
fcvtns, fcvtms, fcvtas, scvtf, fcmgt, fcmeq, fcmlt, fabs, frintp,
frintz, fcvtps, fcvtzs, frecpe, frinta, frintx, fcvtnu, fcvtmu,
fcvtau, ucvtf, fcmge, fcmle, fneg, frinti, fcvtpu, fcvtzu, frsqrte
and fsqrt to the vector register misc. group.
Change-Id: I0267511a7f7ea14247504d29fe4752e84c9af9ad
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch adds FP16
instructions to the group Scalar Three Register Same, making them
available when +simd+fp16 is enabled.
The instructions added are: FABD, FMULX, FCMEQ, FCMGE, FCMGT, FACGE,
FACGT, FRECPS and FRSQRTS.
The general form for these instructions is
<OP> <Hd>, <Hs>, <Hm>
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16.s: Add tests for scalar three register same
instructions.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (aarch64_opcode_table): Add fp16 versions of
fmulx, fcmeq, frecps, frsqrts, fcmge, facge, fabd, fcmgt and
facgt to the scalar three same group.
Change-Id: I155eb8d7c1e9a7c89d691d7e4aae83be51ff1238
ARMv8.2 adds 16-bit floating point operations as an optional extension
to floating point and Adv.SIMD support. This patch adds FP16
instructions to the group Vector Three Register Same, making them
available when +simd+fp16 is enabled.
The instructions added are: FMAXNM, FMAXNMP, FNMINNM, FMINNMP, FMLA,
FMLS, FADD, FADDP, FSUB, FABD, FMULX, FMUL, FCMEQ, FCMGE, FCMGT, FACGE,
FACGT, FMAX, FMAXP, FMIN, FMINP, FRECPS, FDIV and FRSQRTS.
The general form for these instructions is
<OP> <Vd>.<T>, <Vs>.<T>, <Vm>.<T>
where T is 4h or 8h.
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: New.
* gas/aarch64/advsimd-fp16.s: New.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (QL_V3SAMEH): New.
(aarch64_opcode_table): Add fp16 versions of fmaxnm, fmla, fadd,
fmulx, fcmeq, fmax, frecps, fminnm, fmls, fsub, fmin, frsqrts,
fmaxnmp, faddp, fmul, fcmge, facge, fmaxp, fdiv, fminnmp, fabd,
fcmgt, facgt and fminp to the vector three same group.
Change-Id: I3f1c5fe82ca73f7a17fe5329cf2b0de03c94328c
The Statistical Profile Extension adds the instruction PSB CSYNC as an
alias for the HINT #17 instruction. This patch adds the instruction to
binutils as a HINT alias that takes an operand.
A new operand type, AARCH64_OPND_BARRIER_PSB, is added to represent the
operand to PSB. A parser for the operand type is added to the assembler
and a printer to the disassembler. The operand name "csync" is added to
the list of HINT options with HINT number #17. Encoding and decoding of
the operand is handled by the ins_hint/ext_hint functions added in the
preceding patches.
gas/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (aarch64_hint_opt_hsh): New.
(parse_barrier_psb): New.
(parse_operands): Add case for AARCH64_OPND_BARRIER_PSB.
(md_begin): Set up aarch64_hint_opt_hsh.
gas/testsuite/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/system-2.d: Enable the statistical profiling
extension. Update the expected output.
* gas/aarch64/system-2.s: Add tests for PSB CSYNC.
* gas/aarch64/system.d: Update the expected output.
include/opcode/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (aarch64_opnd): Add AARCH64_OPND_BARRIER_PSB.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-opc.c (aarch64_hint_options): Add "csync".
(aarch64_print_operands): Handle AARCH64_OPND_BARRIER_PSB.
* aarch64-tbl.h (aarch64_feature_stat_profile): New.
(STAT_PROFILE): New.
(aarch64_opcode_table): Add "psb".
(AARCH64_OPERANDS): Add "BARRIER_PSB".
Change-Id: I5ffb672d26a8b15b48785478d359350a9b70ca09
The Statistical Profile Extension adds the instruction PSB CSYNC as an
alias for the HINT #17 instruction. This patch adds support for aliases
of HINT which take an operand, adding a table to store operand names and
their matching hint number as well as encoding and decoding functions
for such operands. Parsing and printing the operands are deferred to any
support added for aliases with such operands.
include/opcode/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (aarch64_hint_options): Declare.
(aarch64_opnd_info): Add field hint_option.
opcodes/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm.c (aarch64_ins_hint): New.
* aarch64-asm.h (aarch64_ins_hint): Declare.
* aarch64-dis.c (aarch64_ext_hint): New.
* aarch64-dis.h (aarch64_ext_hint): Declare.
* aarch64-opc-2.c: Regenerate.
* aarch64-opc.c (aarch64_hint_options): New.
* aarch64-tbl.h (AARCH64_OPERANDS): Fix typos.
Change-Id: I2205038fc1c47d3025d1f0bc2fbf405b5575b287
This patch adds the alias REV64 <Rd>, <Rs> as an alias for REV <Rd>,
<Rs>. However, REV is still the preferred form for the instruction.
gas/testsuite/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/alias-2.d: Add tests for REV.
* gas/aarch64/alias-2.s: Likewise.
opcodes/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (aarchr64_opcode_table): Update "rev", add
"rev64".
Change-Id: I331567c8d3618ba9fec1673c6e0b5977222dde61
ARMv8.2 adds two new instructions: BFC as an alias for BFM and REV64 as
an alias for REV. This patch set adds support for these to binutils,
enabled when the -march=armv8.2-a is given. It depends on the support
for an instruction being its preferred form which was added in an
earlier patch.
This patch adds the alias BFC <Rd>, #<imm>, #<width> as the preferred
form for BFM when the source is a zero register and the conditions for
using the BFI form are met (in other words, BFC is the preferred form
for BFI <Rd>, <Rs>, #<imm>, #<width> when the <Rs> is a zero register).
gas/testsuite/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/alias-2.d: New.
* gas/aarch64/alias-2.s: New.
include/opcode/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (aarch64_op): Add OP_BFC.
opcodes/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-asm.c (convert_bfc_to_bfm): New.
(convert_to_real): Add case for OP_BFC.
* aarch64-dis-2.c: Regenerate.
* aarch64-dis.c: (convert_bfm_to_bfc): New.
(convert_to_alias): Add case for OP_BFC.
* aarch64-opc-2.c: Regenerate.
* aarch64-opc.c (operand_general_constraint_met_p): Weaken assert
to allow width operand in three-operand instructions.
* aarch64-tbl.h (QL_BF1): New.
(aarch64_feature_v8_2): New.
(ARMV8_2): New.
(aarch64_opcode_table): Add "bfc".
Change-Id: I6efe318b2538ba11f0caece7c6d70957441c872b
Szabolcs Nagy
Richard Sandiford
Alan Modra
Matthew Wahab
Jiong Wang
Yufeng Zhang
Nick Clifton