df7b86aa4c
PR 14072
...
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* sysdep.h: Generate an error if included before config.h.
* alpha-opc.c: Include sysdep.h before any other header file.
* alpha-dis.c: Likewise.
* avr-dis.c: Likewise.
* cgen-opc.c: Likewise.
* cr16-dis.c: Likewise.
* cris-dis.c: Likewise.
* crx-dis.c: Likewise.
* d10v-dis.c: Likewise.
* d10v-opc.c: Likewise.
* d30v-dis.c: Likewise.
* d30v-opc.c: Likewise.
* h8500-dis.c: Likewise.
* i370-dis.c: Likewise.
* i370-opc.c: Likewise.
* m10200-dis.c: Likewise.
* m10300-dis.c: Likewise.
* micromips-opc.c: Likewise.
* mips-opc.c: Likewise.
* mips61-opc.c: Likewise.
* moxie-dis.c: Likewise.
* or32-opc.c: Likewise.
* pj-dis.c: Likewise.
* ppc-dis.c: Likewise.
* ppc-opc.c: Likewise.
* s390-dis.c: Likewise.
* sh-dis.c: Likewise.
* sh64-dis.c: Likewise.
* sparc-dis.c: Likewise.
* sparc-opc.c: Likewise.
* spu-dis.c: Likewise.
* tic30-dis.c: Likewise.
* tic54x-dis.c: Likewise.
* tic80-dis.c: Likewise.
* tic80-opc.c: Likewise.
* tilegx-dis.c: Likewise.
* tilepro-dis.c: Likewise.
* v850-dis.c: Likewise.
* v850-opc.c: Likewise.
* vax-dis.c: Likewise.
* w65-dis.c: Likewise.
* xgate-dis.c: Likewise.
* xtensa-dis.c: Likewise.
* rl78-decode.opc: Likewise.
* rl78-decode.c: Regenerate.
* rx-decode.opc: Likewise.
* rx-decode.c: Regenerate.
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* sysdep.h: Generate an error if included before config.h.
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* aclocal.m4: Regenerate.
* bfd-in.h: Generate an error if included before config.h.
* sysdep.h: Likewise.
* bfd-in2.h: Regenerate.
* compress.c: Remove #include "config.h".
* plugin.c: Likewise.
* elf32-m68hc1x.c: Include sysdep.h before alloca-conf.h.
* elf64-hppa.c: Likewise.
* som.c: Likewise.
* xsymc.c: Likewise.
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* aclocal.m4: Regenerate.
* Makefile.am: Use wrappers around C files generated by flex.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
* itbl-lex-wrapper.c: New file.
* config/bfin-lex-wrapper.c: New file.
* cgen.c: Include as.h before setjmp.h.
* config/tc-dlx.c: Include as.h before any other header.
* config/tc-h8300.c: Likewise.
* config/tc-lm32.c: Likewise.
* config/tc-mep.c: Likewise.
* config/tc-microblaze.c: Likewise.
* config/tc-mmix.c: Likewise.
* config/tc-msp430.c: Likewise.
* config/tc-or32.c: Likewise.
* config/tc-tic4x.c: Likewise.
* config/tc-tic54x.c: Likewise.
* config/tc-xtensa.c: Likewise.
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* unwind-ia64.h: Include config.h.
2012-05-17 15:13:28 +00:00
7282333f3d
binutils/
...
* dwarf.c (process_debug_info): Display abbrev offset in hex.
(display_debug_abbrev): Show offset of abbrev.
binutils/testsuite/
* binutils-all/objdump.W: Update.
* binutils-all/readelf.wa: Update.
* binutils-all/i386/compressed-1a.d: Update.
* binutils-all/x86-64/compressed-1a.d: Update.
gas/testsuite/
* gas/elf/dwarf2-1.d: Update.
* gas/elf/dwarf2-2.d: Update.
* gas/i386/dw2-compress-1.d: Update.
2012-05-17 10:00:37 +00:00
a2ff7a4bb4
* dwarf.c (display_debug_ranges): Don't report more than one use
...
of the same range set as an overlap.
2012-05-17 07:19:35 +00:00
691bf19c4e
PR binutils/13558
...
* bfd/aout-cris.c: Include sysdep.h before bfd.h.
* bfd/aout-ns32k.c: Likewise.
* bfd/aout-sparcle.c: Likewise.
* bfd/aout0.c: Likewise.
* bfd/bfd-in2.h: Likewise.
* bfd/coff-stgo32.c: Likewise.
* bfd/cpu-lm32.c: Likewise.
* bfd/cpu-microblaze.c: Likewise.
* bfd/cpu-score.c: Likewise.
* bfd/cpu-tilegx.c: Likewise.
* bfd/cpu-tilepro.c: Likewise.
* bfd/elf32-lm32.c: Likewise.
* bfd/elf32-microblaze.c: Likewise.
* bfd/elf32-score7.c: Likewise.
* bfd/elf32-tilepro.c: Likewise.
* bfd/elfxx-tilegx.c: Likewise.
* bfd/mach-o.h: Likewise.
* bfd/nlm32-ppc.c: Likewise.
* bfd/ns32knetbsd.c: Likewise.
* bfd/pef.h: Likewise.
* bfd/plugin.c: Likewise.
* bfd/stab-syms.c: Likewise.
* bfd/sunos.c: Likewise.
* bfd/syms.c: Likewise.
* bfd/xsym.h: Likewise.
* Makefile.am (CFILES): Add syslex_wrap.c.
(sysinfo): Depend upon syslex_wrap.o.
(syslex_wrap.o): New rule.
(syslex.o): Delete rule.
* syslex_wrap.c: New file.
* Makefile.in: Regenerate.
2012-05-16 14:26:46 +00:00
101af531fe
* arm-dis.c (arm_opcodes): Don't disassemble STMFD/LDMIA sp!, {reg}
...
to PUSH/POP {reg}.
* binutils-all/arm/objdump.exp:
STMFD/LDMIA sp!, {reg} don't disassemble to PUSH/POP {reg} any longer.
* gas/arm/stm-ldm.d: STMFD/LDMIA sp!, {reg} don't disassemble to
PUSH/POP {reg} any longer. Some new test cases have been added as well.
* gas/arm/stm-ldm.s: Likewise.
2012-05-16 10:53:49 +00:00
6927f98292
* config/tc-m68hc11.c: Add S12X and XGATE co-processor support.
...
Add option to offset S12 addresses into XGATE memory space.
Tweak target flags to match other tools. (i.e. -m m68hc11).
* doc/as.texinfo: Mention new options.
* doc/c-m68hc11.texi: Document new options.
* NEWS: Mention new support.
* archures.c: Add bfd_arch_m9s12x and bfd_arch_m9s12xg.
* config.bfd: Likewise.
* cpu-m9s12x.c: New.
* cpu-m9s12xg.c: New.
* elf32-m68hc12.c: Add S12X and XGATE co-processor support.
Add option to offset S12 addresses into XGATE memory space.
Fix carry bug in IMM16 (IMM8 low/high) relocate.
* Makefile.am (ALL_MACHINES): Add cpu-m9s12x and cpu-m9s12xg.
(ALL_MACHINES_CFILES): Likewise.
* reloc.c: Add S12X relocs.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* gas/m68hc11/insns9s12x.s: New
* gas/m68hc11/insns9s12x.d: New
* gas/m68hc11/hexprefix.s: New
* gas/m68hc11/hexprefix.d: New
* gas/m68hc11/9s12x-exg-sex-tfr.s: New
* gas/m68hc11/9s12x-exg-sex-tfr.d: New
* gas/m68hc11/insns9s12xg.s: New
* gas/m68hc11/insns9s12xg.d: New
* gas/m68hc11/9s12x-mov.s: New
* gas/m68hc11/9s12x-mov.d: New
* gas/m68hc11/m68hc11.exp: Updated
* gas/m68hc11/*.d: Brought in line with changed objdump output.
* gas/all/gas.exp: XFAIL all hc11/12 targets for redef2,3.
* gas/elf/elf.exp: XFAIL all hc11/12 targets for redef.
* gas/elf/dwarf2-1.d: Skip for hc11/12 targets.
* gas/elf/dwarf2-2.d: Likewise.
* ld-m68hc11/xgate-link.s: New.
* ld-m68hc11/xgate-link.d: New.
* ld-m68hc11/xgate-offset.s: New.
* ld-m68hc11/xgate-offset.d: New.
* ld-m68hc11/xgate1.s: New.
* ld-m68hc11/xgate1.d: New.
* ld-m68hc11/xgate2.s: New.
* ld-m68hc11/m68hc11.exp: Updated.
* ld-m68hc11/*.d: Brought in line with changed objdump output.
* ld-gc/gc.exp: Update CFLAGS for m68hc11.
* ld-plugin/plugin.exp: Likewise.
* ld-srec/srec.exp: XFAIL for m68hc11 and m68hc12.
* configure.in: Add S12X and XGATE co-processor support to m68hc11
target.
* disassemble.c: Likewise.
* configure: Regenerate.
* m68hc11-dis.c: Make objdump output more consistent, use hex
instead of decimal and use 0x prefix for hex.
* m68hc11-opc.c: Add S12X and XGATE opcodes.
* dis-asm.h (print_insn_m9s12x): Prototype.
(print_insn_m9s12xg): Prototype.
* m68hc11.h (R_M68HC12_16B, R_M68HC12_PCREL_9, R_M68HC12_PCREL_10)
R_M68HC12_HI8XG, R_M68HC12_LO8XG): New relocations.
(E_M68HC11_XGATE_RAMOFFSET): Define.
* m68hc11.h: Add XGate definitions.
(struct m68hc11_opcode): Add xg_mask field.
2012-05-15 12:55:51 +00:00
b9c361e0ad
Add support for PowerPC VLE.
...
2012-05-14 Catherine Moore <clm@codesourcery.com>
* NEWS: Mention PowerPC VLE port.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
Catherine Moore <clm@codesourcery.com>
bfd/
* bfd.c (bfd_lookup_section_flags): Add section parm.
* ecoff.c (bfd_debug_section): Remove flag_info initializer.
* elf-bfd.h (bfd_elf_section_data): Move in section_flag_info.
(bfd_elf_lookup_section_flags): Add section parm.
* elf32-ppc.c (is_ppc_vle): New function.
(ppc_elf_modify_segment_map): New function.
(elf_backend_modify_segment_map): Define.
(has_vle_insns): New define.
* elf32-ppc.h (ppc_elf_modify_segment_map): Declare.
* elflink.c (bfd_elf_lookup_section_flags): Add return value & parm.
Move in logic to omit / include a section.
* libbfd-in.h (bfd_link_info): Add section parm.
(bfd_generic_lookup_section_flags): Likewise.
* reloc.c (bfd_generic_lookup_section_flags): Likewise.
* section.c (bfd_section): Move out section_flag_info.
(BFD_FAKE_SECTION): Remove flag_info initializer.
* targets.c (_bfd_lookup_section_flags): Add section parm.
2012-05-14 Catherine Moore <clm@codesourcery.com>
bfd/
* archures.c (bfd_mach_ppc_vle): New.
* bfd-in2.h: Regenerated.
* cpu-powerpc.c (bfd_powerpc_archs): New entry for vle.
* elf32-ppc.c (split16_format_type): New enumeration.
(ppc_elf_vle_split16): New function.
(HOWTO): Add entries for R_PPC_VLE relocations.
(ppc_elf_reloc_type_lookup): Handle PPC_VLE relocations.
(ppc_elf_section_flags): New function.
(ppc_elf_lookup_section_flags): New function.
(ppc_elf_section_processing): New function.
(ppc_elf_check_relocs): Handle PPC_VLE relocations.
(ppc_elf_relocation_section): Likewise.
(elf_backend_lookup_section_flags_hook): Define.
(elf_backend_section_flags): Define.
(elf_backend_section_processing): Define.
* elf32-ppc.h (ppc_elf_section_processing): Declare.
* libbfd.h: Regenerated.
* reloc.c (BFD_RELOC_PPC_VLE_REL8, BFD_RELOC_PPC_VLE_REL15,
BFD_RELOC_PPC_VLE_REL24, BFD_RELOC_PPC_VLE_LO16A,
BFD_RELOC_PPC_VLE_LO16D, BFD_RELOC_PPC_VLE_HI16A,
BFD_RELOC_PPC_VLE_HI16D, BFD_RELOC_PPC_VLE_HA16A,
BFD_RELOC_PPC_VLE_HA16D, BFD_RELOC_PPC_VLE_SDA21,
BFD_RELOC_PPC_VLE_SDA21_LO, BFD_RELOC_PPC_VLE_SDAREL_LO16A,
BFD_RELOC_PPC_VLE_SDAREL_LO16D, BFD_RELOC_PPC_VLE_SDAREL_HI16A,
BFD_RELOC_PPC_VLE_SDAREL_HI16D, BFD_RELOC_PPC_VLE_SDAREL_HA16A,
BFD_RELOC_PPC_VLE_SDAREL_HA16D): New bfd relocations.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
gas/
* config/tc-ppc.c (insn_validate): New func of existing code to call..
(ppc_setup_opcodes): ..from 2 places here.
Revise for second (VLE) opcode table.
Add #ifdef'd code to print opcode tables.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
gas/
* config/tc-ppc.c (ppc_setup_opcodes): Allow out-of-order
for the VLE conditional branches.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
gas/
* config/tc-ppc.c (PPC_VLE_SPLIT16A): New macro.
(PPC_VLE_SPLIT16D): New macro.
(PPC_VLE_LO16A): New macro.
(PPC_VLE_LO16D): New macro.
(PPC_VLE_HI16A): New macro.
(PPC_VLE_HI16D): New macro.
(PPC_VLE_HA16A): New macro.
(PPC_VLE_HA16D): New macro.
(PPC_APUINFO_VLE): New definition.
(md_chars_to_number): New function.
(md_parse_option): Check for combinations of little
endian and -mvle.
(md_show_usage): Document -mvle.
(ppc_arch): Recognize VLE.
(ppc_mach): Recognize bfd_mach_ppc_vle.
(ppc_setup_opcodes): Print the opcode table if
* config/tc-ppc.h (ppc_frag_check): Declare.
* doc/c-ppc.texi: Document -mvle.
* NEWS: Mention PowerPC VLE port.
2012-05-14 Catherine Moore <clm@codesourcery.com>
gas/
* config/tc-ppc.h (ppc_dw2_line_min_insn_length): Declare.
(DWARF2_LINE_MIN_INSN_LENGTH): Redefine.
* config/tc-ppc.c (ppc_dw2_line_min_insn_length): New.
* dwarf2dbg.c (scale_addr_delta): Handle values of 1
for DWARF2_LINE_MIN_INSN_LENGTH.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
gas/testsuite/
* gas/ppc/ppc.exp: Run new tests.
* gas/ppc/vle-reloc.d: New test.
* gas/ppc/vle-reloc.s: New test.
* gas/ppc/vle-simple-1.d: New test.
* gas/ppc/vle-simple-1.s: New test.
* gas/ppc/vle-simple-2.d: New test.
* gas/ppc/vle-simple-2.s: New test.
* gas/ppc/vle-simple-3.d: New test.
* gas/ppc/vle-simple-3.s: New test.
* gas/ppc/vle-simple-4.d: New test.
* gas/ppc/vle-simple-4.s: New test.
* gas/ppc/vle-simple-5.d: New test.
* gas/ppc/vle-simple-5.s: New test.
* gas/ppc/vle-simple-6.d: New test.
* gas/ppc/vle-simple-6.s: New test.
* gas/ppc/vle.d: New test.
* gas/ppc/vle.s: New test.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
include/elf/
* ppc.h (SEC_PPC_VLE): Remove.
2012-05-14 Catherine Moore <clm@codesourcery.com>
James Lemke <jwlemke@codesourcery.com>
include/elf/
* ppc.h (R_PPC_VLE_REL8): New reloction.
(R_PPC_VLE_REL15): Likewise.
(R_PPC_VLE_REL24): Likewise.
(R_PPC_VLE_LO16A): Likewise.
(R_PPC_VLE_LO16D): Likewise.
(R_PPC_VLE_HI16A): Likewise.
(R_PPC_VLE_HI16D): Likewise.
(R_PPC_VLE_HA16A): Likewise.
(R_PPC_VLE_HA16D): Likewise.
(R_PPC_VLE_SDA21): Likewise.
(R_PPC_VLE_SDA21_LO): Likewise.
(R_PPC_VLE_SDAREL_LO16A): Likewise.
(R_PPC_VLE_SDAREL_LO16D): Likewise.
(R_PPC_VLE_SDAREL_HI16A): Likewise.
(R_PPC_VLE_SDAREL_HI16D): Likewise.
(R_PPC_VLE_SDAREL_HA16A): Likewise.
(R_PPC_VLE_SDAREL_HA16D): Likewise.
(SEC_PPC_VLE): Remove.
(PF_PPC_VLE): New program header flag.
(SHF_PPC_VLE): New section header flag.
(vle_opcodes, vle_num_opcodes): New.
(VLE_OP): New macro.
(VLE_OP_TO_SEG): New macro.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
include/opcode/
* ppc.h (PPC_OPCODE_VLE): New definition.
(PPC_OP_SA): New macro.
(PPC_OP_SE_VLE): New macro.
(PPC_OP): Use a variable shift amount.
(powerpc_operand): Update comments.
(PPC_OPSHIFT_INV): New macro.
(PPC_OPERAND_CR): Replace with...
(PPC_OPERAND_CR_BIT): ...this and
(PPC_OPERAND_CR_REG): ...this.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
ld/
* ldlang.c (walk_wild_consider_section): Don't copy section_flag_list.
Pass it to callback.
(walk_wild_section_general): Pass section_flag_list to callback.
(lang_add_section): Add sflag_list parm.
Move out logic to keep / omit a section & call bfd_lookup_section_flags.
(output_section_callback_fast): Add sflag_list parm.
Add new parm to lang_add_section calls.
(output_section_callback): Likewise.
(check_section_callback): Add sflag_list parm.
(lang_place_orphans): Add new parm to lang_add_section calls.
(gc_section_callback): Add sflag_list parm.
(find_relro_section_callback): Likewise.
* ldlang.h (callback_t): Add flag_info parm.
(lang_add_section): Add sflag_list parm.
* emultempl/armelf.em (elf32_arm_add_stub_section):
Add lang_add_section parm.
* emultempl/beos.em (gld*_place_orphan): Likewise.
* emultempl/elf32.em (gld*_place_orphan): Likewise.
* emultempl/hppaelf.em (hppaelf_add_stub_section): Likewise.
* emultempl/m68hc1xelf.em (m68hc11elf_add_stub_section): Likewise.
* emultempl/mipself.em (mips_add_stub_section): Likewise.
* emultempl/mmo.em (mmo_place_orphan): Likewise.
* emultempl/pe.em (gld_*_place_orphan): Likewise.
* emultempl/pep.em (gld_*_place_orphan): Likewise.
* emultempl/ppc64elf.em (ppc_add_stub_section): Likewise.
* emultempl/spuelf.em (spu_place_special_section): Likewise.
* emultempl/vms.em (vms_place_orphan): Likewise.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
ld/testsuite/
* ld-powerpc/powerpc.exp: Create ppceabitests.
* ld-powerpc/vle-multiseg.s: New.
* ld-powerpc/vle-multiseg-1.d: New.
* ld-powerpc/vle-multiseg-1.ld: New.
* ld-powerpc/vle-multiseg-2.d: New.
* ld-powerpc/vle-multiseg-2.ld: New.
* ld-powerpc/vle-multiseg-3.d: New.
* ld-powerpc/vle-multiseg-3.ld: New.
* ld-powerpc/vle-multiseg-4.d: New.
* ld-powerpc/vle-multiseg-4.ld: New.
* ld-powerpc/vle-multiseg-5.d: New.
* ld-powerpc/vle-multiseg-5.ld: New.
* ld-powerpc/vle-multiseg-6.d: New.
* ld-powerpc/vle-multiseg-6.ld: New.
* ld-powerpc/vle-multiseg-6a.s: New.
* ld-powerpc/vle-multiseg-6b.s: New.
* ld-powerpc/vle-multiseg-6c.s: New.
* ld-powerpc/vle-multiseg-6d.s: New.
* ld-powerpc/powerpc.exp: Run new tests.
2012-05-14 Catherine Moore <clm@codesourcery.com>
ld/
* NEWS: Mention PowerPC VLE port.
2012-05-14 Catherine Moore <clm@codesourcery.com>
ld/testsuite/
* ld-powerpc/apuinfo.rd: Update for VLE.
* ld-powerpc/vle-reloc-1.d: New.
* ld-powerpc/vle-reloc-1.s: New.
* ld-powerpc/vle-reloc-2.d: New.
* ld-powerpc/vle-reloc-2.s: New.
* ld-powerpc/vle-reloc-3.d: New.
* ld-powerpc/vle-reloc-3.s: New.
* ld-powerpc/vle-reloc-def-1.s: New.
* ld-powerpc/vle-reloc-def-2.s: New.
* ld-powerpc/vle-reloc-def-3.s: New.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
opcodes/
* ppc-dis.c (get_powerpc_dialect): Use is_ppc_vle.
(PPC_OPCD_SEGS, VLE_OPCD_SEGS): New defines.
(vle_opcd_indices): New array.
(lookup_vle): New function.
(disassemble_init_powerpc): Revise for second (VLE) opcode table.
(print_insn_powerpc): Likewise.
* ppc-opc.c: Likewise.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
Nathan Froyd <froydnj@codesourcery.com>
opcodes/
* ppc-opc.c (insert_arx, extract_arx): New functions.
(insert_ary, extract_ary): New functions.
(insert_li20, extract_li20): New functions.
(insert_rx, extract_rx): New functions.
(insert_ry, extract_ry): New functions.
(insert_sci8, extract_sci8): New functions.
(insert_sci8n, extract_sci8n): New functions.
(insert_sd4h, extract_sd4h): New functions.
(insert_sd4w, extract_sd4w): New functions.
(insert_vlesi, extract_vlesi): New functions.
(insert_vlensi, extract_vlensi): New functions.
(insert_vleui, extract_vleui): New functions.
(insert_vleil, extract_vleil): New functions.
(BI_MASK, BB_MASK, BT): Use PPC_OPERAND_CR_BIT.
(BI16, BI32, BO32, B8): New.
(B15, B24, CRD32, CRS): New.
(CRD, OBF, BFA, CR, CRFS): Use PPC_OPERAND_CR_REG.
(DB, IMM20, RD, Rx, ARX, RY, RZ): New.
(ARY, SCLSCI8, SCLSCI8N, SE_SD, SE_SDH): New.
(SH6_MASK): Use PPC_OPSHIFT_INV.
(SI8, UI5, OIMM5, UI7, BO16): New.
(VLESIMM, VLENSIMM, VLEUIMM, VLEUIMML): New.
(XT6, XA6, XB6, XB6S, XC6): Use PPC_OPSHIFT_INV.
(ALLOW8_SPRG): New.
(insert_sprg, extract_sprg): Check ALLOW8_SPRG.
(OPVUP, OPVUP_MASK OPVUP): New
(BD8, BD8_MASK, BD8IO, BD8IO_MASK): New.
(EBD8IO, EBD8IO1_MASK, EBD8IO2_MASK, EBD8IO3_MASK): New.
(BD15, BD15_MASK, EBD15, EBD15_MASK, EBD15BI, EBD15BI_MASK): New.
(BD24,BD24_MASK, C_LK, C_LK_MASK, C, C_MASK): New.
(IA16, IA16_MASK, I16A, I16A_MASK, I16L, I16L_MASK): New.
(IM7, IM7_MASK, LI20, LI20_MASK, SCI8, SCI8_MASK): New.
(SCI8BF, SCI8BF_MASK, SD4, SD4_MASK): New.
(SE_IM5, SE_IM5_MASK): New.
(SE_R, SE_R_MASK, SE_RR, SE_RR_MASK): New.
(EX, EX_MASK, BO16F, BO16T, BO32F, BO32T): New.
(BO32DNZ, BO32DZ): New.
(NO371, PPCSPE, PPCISEL, PPCEFS, MULHW): Include PPC_OPCODE_VLE.
(PPCVLE): New.
(powerpc_opcodes): Add new VLE instructions. Update existing
instruction to include PPCVLE if supported.
* ppc-dis.c (ppc_opts): Add vle entry.
(get_powerpc_dialect): New function.
(powerpc_init_dialect): VLE support.
(print_insn_big_powerpc): Call get_powerpc_dialect.
(print_insn_little_powerpc): Likewise.
(operand_value_powerpc): Handle negative shift counts.
(print_insn_powerpc): Handle 2-byte instruction lengths.
2012-05-14 19:45:30 +00:00
343dbc36ff
Print addend as signed in objdump
...
binutils/
* objdump.c (disassemble_bytes): Print addend as signed.
(dump_reloc_set): Likewise.
gas/testsuite/
* gas/all/fwdexp.d: Expect addend as signed.
* gas/alpha/elf-reloc-1.d: Likewise.
* gas/i386/mixed-mode-reloc64.d: Likewise.
* gas/i386/reloc64.d: Likewise.
* gas/i386/ilp32/mixed-mode-reloc64.d: Expect addend as signed.
* gas/i386/ilp32/reloc64.d: Likewise.
* gas/ia64/pcrel.d: Likewise.
* gas/mips/branch-misc-2-64.d: Likewise.
* gas/mips/branch-misc-2pic-64.d: Likewise.
* gas/mips/branch-misc-4-64.d: Likewise.
* gas/mips/ldstla-n64-sym32.d: Likewise.
* gas/mips/micromips@branch-misc-2-64.d: Likewise.
* gas/mips/micromips@branch-misc-2pic-64.d: Likewise.
* gas/mips/micromips@branch-misc-4-64.d: Likewise.
* gas/mips/mips16-hilo-n32.d: Likewise.
* gas/ppc/astest.d: Likewise.
* gas/ppc/astest2.d: Likewise.
* gas/ppc/astest2_64.d: Likewise.
* gas/ppc/astest64.d: Likewise.
* gas/ppc/test1elf32.d: Likewise.
* gas/ppc/test1elf64.d: Likewise.
* gas/sparc/reloc64.d: Likewise.
2012-05-14 02:40:00 +00:00
4723351a02
* doc/binutils.texi: Add --dwarf-check option.
...
* dwarf.c (dwarf_check): New global flag.
(fetch_indexed_string): New function.
(fetch_indexed_value): New function.
(get_FORM_name): Add DW_FORM_GNU_str_index and DW_FORM_GNU_addr_index.
(decode_location_expression): Add DW_OP_GNU_addr_index.
(read_and_display_attr_value): Add DW_FORM_GNU_str_index,
DW_FORM_GNU_addr_index, DW_AT_GNU_addr_base, and DW_AT_GNU_ranges_base.
(get_AT_name): Add new attributes for Fission.
(process_debug_info): Load new debug sections for Fission.
(load_debug_info): Check for .debug_info.dwo section.
(display_loc_list, display_loc_list_dwo): New functions.
(display_debug_loc): Move logic to above two functions.
(display_debug_info): Choose abbrev section based on info section.
(display_debug_types): Likewise.
(display_trace_info): Likewise.
(comp_addr_base): New function.
(display_debug_addr): New function.
(display_debug_str_offsets): New function.
(display_debug_ranges): Allow missing range lists. Suppress
diagnostics if dwarf_check not set.
(debug_displays): Add column to select abbrev section.
* dwarf.h (enum dwarf_section_display_enum): Add new debug sections
for Fission.
(struct dwarf_section): Add abbrev_sec field.
(struct dwarf_section_display): New type.
(debug_info): Add addr_base, ranges_base fields.
(dwarf_check): New global variable.
* objdump.c (usage): Add --dwarf-check option.
(enum option_values): Add OPTION_DWARF_CHECK.
(long_options): Add --dwarf-check.
(main): Likewise.
* readelf.c (OPTION_DWARF_CHECK): New macro.
(options): Add --dwarf-check.
(parse_args): Likewise.
(process_section_headers): Use const_strneq instead of
streq.
2012-05-11 18:18:34 +00:00
e04d7088af
Always display addend as signed hex number
...
binutils/
PR binutils/14088
* readelf.c (dump_relocations): Always display addend as
signed hex number.
ld/testsuite/
PR binutils/14088
* ld-ia64/tlspic.rd: Updated.
* ld-x86-64/tlsdesc-nacl.rd: Likewise.
* ld-x86-64/tlsdesc.rd: Likewise.
* ld-x86-64/tlspic-nacl.rd: Likewise.
* ld-x86-64/tlspic.rd: Likewise.
2012-05-11 15:48:15 +00:00
208a4923ed
PR binutils/14028
...
* configure.in: Invoke ACX_HEADER_STRING.
* configure: Regenerate.
* config.in: Regenerate.
* sysdep.h: If STRINGS_WITH_STRING is defined then include both
string.h and strings.h.
2012-05-11 14:25:30 +00:00
afd6e1ffce
* dwarf.c (read_and_display_attr_value): Don't look up tag from
...
abbrev for DW_FORM_ref_addr.
2012-05-10 06:18:48 +00:00
a8c30cbad4
Added log for a change I made in binutils/MAINTAINERS.
2012-05-09 00:36:46 +00:00
8d88d7ec85
Added my contact information to the maintainers section.
2012-05-09 00:33:37 +00:00
96109726a4
binutils/
...
* doc/binutils.texi (objcopy): Add --strip-dwo, --extract-dwo options.
(strip): Add --strip-dwo option.
* objcopy.c (enum strip_action): Add STRIP_DWO, STRIP_NONDWO.
(enum command_line_switch): Add OPTION_EXTRACT_DWO, OPTION_STRIP_DWO.
(strip_options): Add --strip-dwo option.
(copy_options): Add --extract-dwo, --strip-dwo options.
(copy_usage): Likewise.
(strip_usage): Add --strip-dwo option.
(is_dwo_section): New function.
(is_strip_section_1): Check for DWO sections.
(copy_object): Check for --strip-dwo, --extract-dwo options.
(copy_relocations_in_section): Discard relocations for DWO sections.
Discard entire relocation section when no relocations.
(strip_main): Add --strip-dwo option.
(copy_main): Add --strip-dwo, --extract-dwo options.
2012-05-08 17:49:36 +00:00
e5b62927f4
* Makefile.am (check_DEJAGNU): Export LC_ALL=C in place of other
...
LC and LANG environment vars.
* Makefile.in: Regenerate.
2012-05-08 12:14:15 +00:00
a19c41a7dc
* dwarf.c (get_TAG_name): Use get_DW_TAG_name.
...
(get_FORM_name): Use get_DW_FORM_name.
(get_AT_name): Use get_DW_AT_name.
2012-05-07 15:04:59 +00:00
cce3d66c34
* Makefile.am (check-DEJAGNU): Clear LC_COLLATE, LC_ALL and LANG.
...
* Makefile.in: Regenerate.
2012-05-07 09:21:48 +00:00
45dfa85a1e
Replace all uses of bfd_abs_section, bfd_com_section, bfd_und_section
...
and bfd_ind_section with their _ptr variants, or use corresponding
bfd_is_* macros.
2012-05-05 03:05:32 +00:00
f6c1a2d592
Add support for Motorola XGATE embedded CPU
2012-05-03 13:12:08 +00:00
1c062060da
* po/vi.po: Updated Vietnamese translation.
...
* po/it.po: New Italian translation.
* configure.in (ALL_LINGUAS): Add it.
* configure: Regenerate.
2012-05-02 14:51:05 +00:00
57402f1e31
PR binutils/13121
...
Rename 'finfo' to 'flaginfo' to avoid conflicts with
AIX system headers.
2012-05-01 16:07:36 +00:00
2e30cb575a
* doc/binutils.texi: Add -D/--enable-deterministic-archives option
...
to strip and objcopy.
* objcopy.c (deterministic): New global variable.
(strip_options): Add --enable-deterministic-archives.
(copy_options): Likewise.
(copy_usage): Likewise.
(strip_usage): Likewise.
(copy_archive): When stripping all, don't add archive map; set
deterministic output when requested.
(strip_main): Add -D/--enable-deterministic-archives option.
(copy_main): Likewise.
2012-04-25 17:50:14 +00:00
c398915025
Don't generate empty reloc sections
...
binutils/
PR binutils/13947
* objcopy.c (copy_object): Call copy_relocations_in_section
before copy_section.
(skip_section): New.
(copy_relocations_in_section): Likewise.
(copy_section): Use skip_section. Don't copy relocations here.
binutils/testsuite/
PR binutils/13947
* binutils-all/i386/compressed-1b.d: Remove empty REL section.
* binutils-all/i386/compressed-1c.d: Likewise.
* binutils-all/x86-64/compressed-1b.d: Remove empty RELA
section.
* binutils-all/x86-64/compressed-1c.d: Likewise.
2012-04-13 02:52:34 +00:00
1233b4a775
* objdump.c (dump_bfd): If defaulting to dwarf call
...
dwarf_select_sections_all to enable displays.
2012-04-11 14:05:30 +00:00
5879767462
binutils/
...
2012-04-06 Roland McGrath <mcgrathr@google.com>
* configure.in (AC_CHECK_HEADERS): Add locale.h.
* config.in: Regenerate.
* configure: Regenerate.
gas/
2012-04-06 Roland McGrath <mcgrathr@google.com>
* configure.in (AC_CHECK_HEADERS): Add locale.h.
* config.in: Regenerate.
* configure: Regenerate.
gold/
2012-04-06 Roland McGrath <mcgrathr@google.com>
* configure.in (AC_CHECK_HEADERS): Add locale.h.
* config.in: Regenerate.
* configure: Regenerate.
ld/
2012-04-06 Roland McGrath <mcgrathr@google.com>
* configure.in (AC_CHECK_HEADERS): Add locale.h.
* config.in: Regenerate.
* configure: Regenerate.
2012-04-06 16:49:02 +00:00
443507505d
* configure.in (AC_CHECK_FUNCS): Add setlocale.
...
(AM_LC_MESSAGES): Add.
* aclocal.m4: Regenerate.
* config.in: Regenerate.
* configure: Regenerate.
2012-04-05 08:43:41 +00:00
5a68afcf73
bfd/
...
2012-04-03 Roland McGrath <mcgrathr@google.com>
* elf-nacl.c: New file.
* elf-nacl.h: New file.
* elf32-i386.c (elf_backend_modify_segment_map): Define for
bfd_elf32_i386_nacl_vec.
(elf_backend_modify_program_headers): Likewise.
* elf64-x86-64.c (elf_backend_modify_segment_map): Define for
bfd_elf64_x86_64_nacl_vec and bfd_elf32_x86_64_nacl_vec.
(elf_backend_modify_program_headers): Likewise.
* Makefile.am (BFD32_BACKENDS, BFD64_BACKENDS): Add elf-nacl.lo here.
(BFD32_BACKENDS_CFILES, BFD64_BACKENDS_CFILES): Add elf-nacl.c here.
* Makefile.in: Regenerated.
* configure.in (bfd_elf64_x86_64_nacl_vec): Add elf-nacl.o to tb here.
(bfd_elf32_x86_64_nacl_vec): Likewise.
(bfd_elf64_x86_64_vec, bfd_elf32_x86_64_vec): Likewise.
(bfd_elf64_x86_64_freebsd_vec, bfd_elf64_x86_64_sol2_vec): Likewise.
(bfd_elf64_l1om_vec, bfd_elf64_l1om_freebsd_vec): Likewise.
(bfd_elf64_k1om_vec, bfd_elf64_k1om_freebsd_vec): Likewise.
(bfd_elf32_i386_nacl_vec): Likewise.
(bfd_elf32_i386_sol2_vec, bfd_elf32_i386_freebsd_vec): Likewise.
(bfd_elf32_i386_vxworks_vec, bfd_elf32_i386_vec): Likewise.
* configure: Regenerated.
binutils/testsuite/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* lib/binutils-common.exp (is_elf_format): Consider *-*-nacl* to
be ELF too.
* binutils-all/elfedit-4.d: Add "#as: --64" option.
* binutils-all/i386/i386.exp: Accept nacl targets too.
* binutils-all/x86-64/x86-64.exp: Likewise.
gas/testsuite/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* gas/i386/k1om.d: Add not-target match for *-*-nacl*.
* gas/i386/l1om.d: Likewise.
ld/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* configure.tgt (i[3-7]86-*-nacl*, x86_64-*-nacl*): Handle them.
* emulparams/elf_nacl.sh: New file.
* emulparams/elf_i386_nacl.sh: New file.
* emulparams/elf32_x86_64_nacl.sh: New file.
* emulparams/elf_x86_64_nacl.sh: New file.
* Makefile.am (ALL_EMULATION_SOURCES): Add eelf_i386_nacl.c here.
(ALL_64_EMULATION_SOURCES): Add eelf32_x86_64_nacl.c and
eelf_x86_64_nacl.c here.
(eelf_i386_nacl.c, eelf32_x86_64_nacl.c, eelf_x86_64_nacl.c):
New targets.
* Makefile.in: Regenerated.
* scripttempl/elf.sc: Handle SEPARATE_CODE cases.
ld/testsuite/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* ld-x86-64/ilp32-4-nacl.d: New file.
* ld-x86-64/x86-64.exp: Run it.
* ld-discard/discard.exp: Accept nacl targets too.
* ld-elf/binutils.exp: Likewise.
* ld-elf/comm-data.exp: Likewise.
* ld-elf/elf.exp: Likewise.
* ld-elf/tls_common.exp: Likewise.
* ld-elfvers/vers.exp: Likewise.
* ld-elfvsb/elfvsb.exp: Likewise.
* ld-elfweak/elfweak.exp: Likewise.
* ld-gc/gc.exp: Likewise.
* ld-ifunc/binutils.exp: Likewise.
* ld-ifunc/ifunc.exp: Likewise.
* ld-linkonce/linkonce.exp:Likewise.
* ld-pie/pie.exp: Likewise.
* ld-shared/shared.exp: Likewise.
* ld-undefined/weak-undef.exp: Likewise.
* ld-unique/unique.exp: Likewise.
* ld-x86-64/dwarfreloc.exp: Likewise.
* ld-x86-64/line.exp: Likewise.
* lib/ld-lib.exp (slurp_options): Support global array
options_regsub to apply substitutions to the contents
of options lines read from the file.
* ld-i386/emit-relocs.d: Renamed to ...
* ld-i386/emit-relocs.rd: ... this.
* ld-i386/i386.exp: Accept nacl targets too.
For them, use options_regsub to replace elf_i386 with
elf_i386_nacl in run_dump_test cases; apply the same
substitution in $i386tests; replace foo.rd expectations
files with foo-nacl.rd in $i386tests.
(i386tests): Change emit-relocs.d to emit-relocs.rd here.
* ld-i386/emit-relocs-nacl.rd: New file.
* ld-i386/plt-nacl.pd: New file.
* ld-i386/plt-pic-nacl.pd: New file.
* ld-i386/tlsbin-nacl.rd: New file.
* ld-i386/tlsbindesc-nacl.rd: New file.
* ld-i386/tlsdesc-nacl.rd: New file.
* ld-i386/tlsgdesc-nacl.rd: New file.
* ld-i386/tlsnopic-nacl.rd: New file.
* ld-i386/tlspic-nacl.rd: New file.
* ld-x86-64/x86-64.exp: Accept nacl targets too.
For them, use options_regsub to replace elf_x86_64 with
elf_x86_64_nacl in run_dump_test cases; apply the same
substitution in $x86_64tests; replace foo.rd expectations
files with foo-nacl.rd in $x86_64tests.
Add explicit -melf_x86_64 to ld options in tests that need it,
in case the default emulation is x32 (as it is for x86_64-nacl).
* ld/testsuite/ld-x86-64/plt-nacl.pd: New file.
* ld/testsuite/ld-x86-64/split-by-file-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsbin-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsbindesc-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsdesc-nacl.pd: New file.
* ld/testsuite/ld-x86-64/tlsdesc-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsgdesc-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlspic-nacl.rd: New file.
* ld-i386/hidden2.d: Loosen regexps to match any file format variant,
and not to depend on exact addresses, displacements, etc. where
they are irrelevant.
* ld-i386/pcrel16.d: Likewise.
* ld-i386/pcrel16abs.d: Likewise.
* ld-i386/pr12718.d: Likewise.
* ld-i386/pr12921.d: Likewise.
* ld-i386/reloc.d: Likewise.
* ld-i386/tlsbin.dd: Likewise.
* ld-i386/tlsbin.sd: Likewise.
* ld-i386/tlsbin.td: Likewise.
* ld-i386/tlsbindesc.dd: Likewise.
* ld-i386/tlsbindesc.sd: Likewise.
* ld-i386/tlsbindesc.td: Likewise.
* ld-i386/tlsdesc.dd: Likewise.
* ld-i386/tlsdesc.sd: Likewise.
* ld-i386/tlsdesc.td: Likewise.
* ld-i386/tlsg.sd: Likewise.
* ld-i386/tlsgdesc.dd: Likewise.
* ld-i386/tlsindntpoff.dd: Likewise.
* ld-i386/tlsnopic.dd: Likewise.
* ld-i386/tlsnopic.sd: Likewise.
* ld-i386/tlspic.dd: Likewise.
* ld-i386/tlspic.sd: Likewise.
* ld-i386/tlspic.td: Likewise.
* ld-i386/tlspie2.d: Likewise.
* ld-x86-64/hidden2.d: Likewise.
* ld-x86-64/pcrel16.d: Likewise.
* ld-x86-64/pr12718.d: Likewise.
* ld-x86-64/pr12921.d: Likewise.
* ld-x86-64/protected3.d: Likewise.
* ld-x86-64/tlsbin.dd: Likewise.
* ld-x86-64/tlsbin.sd: Likewise.
* ld-x86-64/tlsbin.td: Likewise.
* ld-x86-64/tlsbindesc.dd: Likewise.
* ld-x86-64/tlsbindesc.sd: Likewise.
* ld-x86-64/tlsbindesc.td: Likewise.
* ld-x86-64/tlsdesc.dd: Likewise.
* ld-x86-64/tlsdesc.sd: Likewise.
* ld-x86-64/tlsdesc.td: Likewise.
* ld-x86-64/tlsg.sd: Likewise.
* ld-x86-64/tlsgd5.dd: Likewise.
* ld-x86-64/tlsgd6.dd: Likewise.
* ld-x86-64/tlsgdesc.dd: Likewise.
* ld-x86-64/tlspic.dd: Likewise.
* ld-x86-64/tlspic.sd: Likewise.
* ld-x86-64/tlspic.td: Likewise.
* ld-x86-64/ilp32-8.d: Match any file format variant.
Use a -Ttext and adjust expected results, to handle variant layouts.
* ld-x86-64/ilp32-9.d: Likewise.
* ld-i386/alloc.t: Remove superfluous OUTPUT_FORMAT statement.
* ld-i386/pr12627.t: Likewise.
* ld-x86-64/abs-l1om.d: Add target: constraint.
* ld-x86-64/protected2-l1om.d: Likewise.
* ld-x86-64/protected3-l1om.d: Likewise.
* ld-x86-64/ilp32-4.d: Likewise.
* ld-x86-64/plt.s: New file.
* ld-x86-64/pltlib.s: New file.
* ld-x86-64/plt.pd: New file.
* ld-x86-64/x86-64.exp (x86_64tests): Add them.
* ld-i386/plt.s: New file.
* ld-i386/pltlib.s: New file.
* ld-i386/plt.pd: New file.
* ld-i386/plt-pic.s: New file.
* ld-i386/plt-pic.pd: New file.
* ld-i386/i386.exp (i386tests): Add them.
2012-04-03 16:01:38 +00:00
b149968f7a
PR binutils/13925
...
* stabs.c (stab_demangle_v3_arglist): Cope with the demangler
returning an empty context for a function with no arguments.
2012-03-30 12:51:07 +00:00
658c734487
* dwarf.c (display_gdb_index): Handle index version 6.
2012-03-29 01:55:41 +00:00
8560e02a72
PR binutils/3807
...
* binutils-all/objcopy.exp (localize-hidden-1): Correct xfailed
mips-targets.
2012-03-13 00:41:22 +00:00
0a22ae8eb5
* mn10300.h (elf_mn10300_reloc_type): Add R_MN10300_TLS_GD,
...
R_MN10300_TLS_LD, R_MN10300_TLS_LDO, R_MN10300_TLS_GOTIE,
R_MN10300_TLS_IE, R_MN10300_TLS_LE, R_MN10300_TLS_DPTMOD,
R_MN10300_TLS_DTPOFF and R_MN10300_TLS_TPOFF.
* elf-m10300.c (elf32_mn10300_link_hash_entry): Add tls_type
field.
(elf32_mn10300_link_hash_table): Add tls_ldm_got entry;
(elf_mn10300_tdata): Define.
(elf_mn10300_local_got_tls_type): Define.
(elf_mn10300_howto_table): Add entries for R_MN10300_TLS_GD,
R_MN10300_TLS_LD, R_MN10300_TLS_LDO, R_MN10300_TLS_GOTIE,
R_MN10300_TLS_IE, R_MN10300_TLS_LE, R_MN10300_TLS_DPTMOD,
R_MN10300_TLS_DTPOFF, R_MN10300_TLS_TPOFF relocs.
(mn10300_reloc_map): Likewise.
(elf_mn10300_tls_transition): New function.
(dtpoff, tpoff, mn10300_do_tls_transition): New functions.
(mn10300_elf_check_relocs): Add TLS support.
(mn10300_elf_final_link_relocate): Likewise.
(mn10300_elf_relocate_section): Likewise.
(mn10300_elf_relax_section): Likewise.
(elf32_mn10300_link_hash_newfunc): Initialise new field.
(_bfd_mn10300_copy_indirect_symbol): New function.
(elf32_mn10300_link_hash_table_create): Initialise new fields.
(_bfd_mn10300_elf_size_dynamic_sections): Add TLS support.
(_bfd_mn10300_elf_finish_dynamic_symbol): Likewise.
(_bfd_mn10300_elf_reloc_type_class): Allocate an
elf_mn10300_obj_tdata structure.
(elf_backend_copy_indirect_symbol): Define.
* reloc.c (BFD_MN10300_TLS_GD, BFD_MN10300_TLS_LD,
BFD_MN10300_TLS_LDO, BFD_MN10300_TLS_GOTIE, BFD_MN10300_TLS_IE,
BFD_MN10300_TLS_LE, BFD_MN10300_TLS_DPTMOD,
BFD_MN10300_TLS_DTPOFF, BFD_MN10300_TLS_TPOFF): New relocations.
(BFD_RELOC_MN10300_32_PCREL, BFD_RELOC_MN10300_16_PCREL): Move to
alongside other MN10300 relocations.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* config/tc-mn10300.c (other_registers): Add SSP and USP.
(md_assemble): Add support for TLS relocs.
(mn10300_parse_name): Likewise.
* readelf.c (is_16bit_abs_reloc): Add detection of R_MN10300_16.
2012-03-07 17:52:00 +00:00
ae9ab7c019
* doc/binutils.texi (c++filt): Fix typos.
2012-02-29 10:44:10 +00:00
fb6ceddedd
Add big-endian support for tilegx.
...
bfd/
* config.bfd (tilegx-*-*): rename little endian vector; add big
endian vector.
(tilegxbe-*-*): New case.
* configure.in (bfd_elf32_tilegx_vec): Rename...
(bfd_elf32_tilegx_le_vec): ... to this.
(bfd_elf32_tilegx_be_vec): New vector.
(bfd_elf64_tilegx_vec): Rename...
(bfd_elf64_tilegx_le_vec): ... to this.
(bfd_elf64_tilegx_be_vec): New vector.
* configure: Regenerate.
* elf32-tilegx.c (TARGET_LITTLE_SYM): Rename.
(TARGET_LITTLE_NAME): Ditto.
(TARGET_BIG_SYM): Define.
(TARGET_BIG_NAME): Define.
* elf64-tilegx.c (TARGET_LITTLE_SYM): Rename.
(TARGET_LITTLE_NAME): Ditto.
(TARGET_BIG_SYM): Define.
(TARGET_BIG_NAME): Define.
* targets.c (bfd_elf32_tilegx_vec): Rename...
(bfd_elf32_tilegx_le_vec): ... to this.
(bfd_elf32_tilegx_be_vec): Declare.
(bfd_elf64_tilegx_vec): Rename...
(bfd_elf64_tilegx_le_vec): ... to this.
(bfd_elf64_tilegx_be_vec): Declare.
(_bfd_target_vector): Add / rename above vectors.
binutils/testsuite/
* binutils-all/objdump.exp (cpus_expected): Add tilegx.
gas/
* tc-tilegx.c (tilegx_target_format): Handle big endian.
(OPTION_EB): Define.
(OPTION_EL): Define.
(md_longopts): Add entries for "EB" and "EL".
(md_parse_option): Handle OPTION_EB and OPTION_EL.
(md_show_usage): Add -EB and -EL.
(md_number_to_chars): New.
* tc-tilegx.h (TARGET_BYTES_BIG_ENDIAN): Guard definition with
ifndef.
(md_number_to_chars): Delete.
* configure.tgt (tilegx*be): Handle.
* doc/as.texinfo [TILE-Gx]: Document -EB and -EL.
* doc/c-tilegx.texi: Ditto.
ld/
* Makefile.am (ALL_EMULATION_SOURCES): Add eelf32tilegx_be.c.
(ALL_64_EMULATION_SOURCES): Add eelf64tilegx_be.c.
(eelf32tilegx_be.c): Add rule to build this file.
(eelf64tilegx_be.c): Ditto.
* Makefile.in: Regenerate.
* configure.tgt (tilegx-*-*): Support big endian.
(tilegxbe-*-*): New.
* emulparams/elf32tilegx.sh (OUTPUT_FORMAT): Rename.
(BIG_OUTPUT_FORMAT): Define.
(LITTLE_OUTPUT_FORMAT): Define.
* emulparams/elf32tilegx_be.sh: New.
* emulparams/elf64tilegx.sh (OUTPUT_FORMAT): Rename.
(BIG_OUTPUT_FORMAT): Define.
(LITTLE_OUTPUT_FORMAT): Define.
* emulparams/elf64tilegx_be.sh: New.
ld/testsuite/
* ld-tilegx/reloc-be.d: New.
* ld-tilegx/reloc-le.d: New.
* ld-tilegx/reloc.d: Delete.
* ld-tilegx/tilegx.exp: Test big and little endian.
2012-02-25 19:51:34 +00:00
5b3d386eed
PR binutils/13710
...
* defparse.y (keyword_as_name): Disable LIBRARY
keyword.
* doc/binutils.texi: Document LIBRARY exception.
PR binutils/13710
* deffilep.y (keyword_as_name): Disable LIBRARY
keyword.
2012-02-24 14:20:19 +00:00
9a30f23643
PR binutils/13682
...
* NEWS: Mention new feature.
* dlltool.c (i386_x64_dljtab): New stub-code for x64
delayed-load feature.
(i386_x64_trampoline): New trampoline-code for x64
delayed-load feature.
(make_one_lib_file): Add support for x64 delayed-load
feature.
(make_delay_head): Likewis
2012-02-21 16:10:12 +00:00
6c7130122d
* objdump.c (slurp_file): Close file if fstat fails.
2012-02-20 03:25:21 +00:00
74bc605283
* dwarf.c (dwarf_vmatoa64): New function.
...
(read_and_display_attr_value): Print 8-byte forms as single hex
numbers.
(process_debug_info): Print type signatures as single hex numbers.
* elfcomm.c (byte_get_64): New function.
* elfcomm.h (byte_get_64): New function.
2012-02-15 18:32:30 +00:00
3140414bd2
* binutils-all/dlltool.exp: Add setup_xfail.
2012-02-14 02:40:39 +00:00
1d2b8df224
Regenerate
2012-02-14 01:25:47 +00:00
71ac97b253
* binutils-all/dw2-decodedline.S: Always have whitespace before
...
directives.
* binutils-all/version.s: Likewise.
* binutils-all/objdump.exp (dw2-decodedline): Don't run for
hppa64*-*-hpux*, i370-*-*, i960-*-*.
2012-02-14 01:00:50 +00:00
aa83d1ec50
ChangeLog binutils
...
2012-02-11 Kai Tietz <ktietz@redhat.com>
PR binutils/13657
* defparse.y (%union): New type id_const.
(opt_name2): New rule.
(keyword_as_name): New rule.
(opt_name): Adjust rule.
(opt_import_name): Likewise.
(opt_equal_name): Likewise.
ChangeLog binutils/testsuite
2012-02-11 Kai Tietz <ktietz@redhat.com>
* binutils-all/version.def: New file.
* binutils-all/dlltool.exp: Add version-dll test.
ChangeLog ld
2012-02-11 Kai Tietz <ktietz@redhat.com>
* deffilep.y (%union): New type id_const.
(opt_name2): New rule.
(keyword_as_name): New rule.
(dot_name): Replaced by opt_name2 rule.
(opt_name): Adjust rule.
(opt_equal_name): Likewise.
2012-02-11 20:02:03 +00:00
7afcdbb2bf
PR binutils/13297
...
* resrc.c (write_rc_dialog_control): Omit text dump for
EDITTEXT, COMBOBOX, LISTBOX, and SCROLLBAR.
2012-02-11 15:15:34 +00:00
dbb7c4414b
* sysdep.h: Include sys/stat.h here.
...
* ar.c: Don't include headers already included by sysdep.h.
* bucomm.c: Likewise.
* budbg.h: Likewise.
* dlltool.h: Likewise.
* elfedit.c: Likewise.
* nlmconv.c: Likewise.
* objcopy.c: Likewise.
* objdump.c: Likewise.
* objdump.h: Likewise.
* readelf.c: Likewise.
* rename.c: Likewise.
* resrc.c: Likewise.
* strings.c: Likewise.
* windres.c: Likewise.
* od-macho.c: Ensure #include sysdep.h is first.
* od-xcoff.c: Likewise.
* dllwrap.c: Remove alloca pragma handled by sysdep.h, and
remove duplicate headers.
* dlltool.c: Likewise and ensure #include sysdep.h is first.
2012-02-09 04:51:44 +00:00
1c9e87ee56
* binutils-all/readelf.n: Add #pass to cope with targets that add
...
their own notes.
2012-02-02 08:45:03 +00:00
36e32b27f6
PR binutils/13493
...
* ar.c (ranlib_main): Process --plugin option.
* doc/binutils.texi: Document --plugin support for ranlib.
2012-02-01 16:49:26 +00:00
f20bd22b62
oops - accidentally omitted from previous delta.
2012-02-01 16:13:55 +00:00
8b971f9fe9
PR binutils/13482
...
* readelf.c (process_corefile_note_segment): Fix off-by-one errors
verifying the contents of a note.
* binutils-all/version.s: New test source file.
* binutils-all/readelf.n: New file: expected readelf output.
* binutils-all/readelf.exp: Add test of .note section contents.
2012-02-01 15:44:30 +00:00
fa1908fd56
PR binutils/13622
...
* readelf.c (process_section_groups): If there are no section
headers do not scan for section groups.
(process_note_sections): Likewise for note sections.
2012-01-26 09:59:30 +00:00
2128eb399e
2012-01-20 Tristan Gingold <gingold@adacore.com>
...
* od-macho.c (OPT_SEG_SPLIT_INFO): New macro.
(options): Add an entry for seg_split_info.
(mach_o_help): Document it.
(dump_segment_split_info): New function.
(dump_load_command): Handle seg_split_info.
2012-01-20 10:40:53 +00:00
2fc0fe4faa
2012-01-19 Tristan Gingold <gingold@adacore.com>
...
* dwarf.c (process_extended_line_op): Add a cast to silent a
warning.
2012-01-19 13:58:15 +00:00
143a3db098
2012-01-19 Tristan Gingold <gingold@adacore.com>
...
* dwarf.c (process_extended_line_op): Reindent define_file output.
Detect define_file opcode length mismatch.
(display_debug_lines_decoded): Add an entry in file_table for each
define_file opcode.
Ignore DW_LNE_set_discriminator and DW_LNE_HP_set_sequence.
Display extended opcode for unhandle opcode.
2012-01-19 11:34:44 +00:00
576477a6ee
Update copyright message year.
2012-01-17 00:07:04 +00:00
ddb1377cc0
PR binutils/13593
...
* nm.c (OPTION_SIZE_SORT): Define.
(long_options): Don't set no_sort, sort_numerically or
sort_by_size directly.
(main): Instead set the flags here, making them mutually exclusive.
2012-01-16 08:43:20 +00:00
1598539f98
2012-01-10 Tristan Gingold <gingold@adacore.com>
...
* objdump.c (display_object_bfd): Renamed from ...
(display_bfd): ... this.
(display_any_bfd): New function.
(display_file): Split. Handle nested archives.
2012-01-10 11:52:27 +00:00
52546677d1
binutils/
...
* configure.in: Use AM_ZLIB.
* configure: Regenerated.
ld/
* configure.in: Use AM_ZLIB.
* configure: Regenerated.
2012-01-10 00:02:47 +00:00
99eac5be5f
* po/ru.po: Updated Russian translation.
2012-01-06 10:29:57 +00:00
23e1d3291c
Rotate ChangeLogs
2012-01-05 10:09:39 +00:00
9f4a5bd19a
bfd/
...
2012-01-04 Tristan Gingold <gingold@adacore.com>
* mach-o.h (bfd_mach_o_fvmlib_command): New structure.
(bfd_mach_o_load_command): Add fvmlib field.
* mach-o.c (bfd_mach_o_read_fvmlib): New function.
(bfd_mach_o_read_command): Handle fvmlib.
binutils/
2012-01-04 Tristan Gingold <gingold@adacore.com>
* od-macho.c (dump_load_command): Handle fvmlib.
include/mach-o/
2012-01-04 Tristan Gingold <gingold@adacore.com>
* external.h (mach_o_fvmlib_command_external): New structure.
2012-01-04 10:37:36 +00:00
fc55a90257
bfd/
...
2012-01-04 Tristan Gingold <gingold@adacore.com>
* mach-o.h: Reindent header.
(bfd_mach_o_encryption_info_command): New structure.
(bfd_mach_o_load_command): Add encryption_info field.
* mach-o.c (bfd_mach_o_read_encryption_info): New function.
(bfd_mach_o_read_command): Handle BFD_MACH_O_LC_ENCRYPTION_INFO.
(bfd_mach_o_read_command): Adjust error message.
binutils/
2012-01-04 Tristan Gingold <gingold@adacore.com>
* od-macho.c: Update copyright year.
(dump_load_command): Handle BFD_MACH_O_LC_ENCRYPTION_INFO.
include/mach-o/
2012-01-04 Tristan Gingold <gingold@adacore.com>
* external.h: Update copyright year.
(mach_o_symtab_command_external): Add comments.
(mach_o_encryption_info_command_external): New structure.
2012-01-04 09:58:55 +00:00
3362e0d9fb
* dwarf.c (read_and_display_attr_value): Handle DW_LANG_Go.
2011-12-29 01:53:00 +00:00
9cb80f72d8
* configure.in (--enable-deterministic-archives): Grok new
...
argument. Set DEFAULT_AR_DETERMINISTIC to 1 or 0 accordingly.
* configure: Regenerated.
* config.in: Regenerated.
* ar.c (deterministic): Initialize to -1.
(decode_options, ranlib_main): Grok U option.
(usage, ranlib_usage): Mention U; say for D and U which is the default.
(default_deterministic): New function.
(ranlib_main): Call it.
(main): Likewise. Make newer_only && deterministic error
non-fatal if it was just DEFAULT_AR_DETERMINISTIC and not the D option.
* doc/binutils.texi (ar cmdline, ranlib): Document U modifier and
--enable-deterministic-archives behavior.
2011-12-21 19:39:11 +00:00
2634e8c8ff
binutils/
...
2011-12-16 Tristan Gingold <gingold@adacore.com>
* od-macho.c: Include mach-o/codesign.h
(OPT_CODESIGN): Define.
(options): Add an entry for codesign.
(mach_o_help): Likewise.
(dump_header): Fix indentation.
(dump_thread): Do not test result of xmalloc.
(bfd_mach_o_cs_magic, bfd_mach_o_cs_hash_type): New.
(dump_code_signature_superblob): New function.
(swap_code_codedirectory_v1_in): Likewise.
(hexdump): Likewise.
(dump_code_signature_codedirectory): Likewise.
(dump_code_signature_blob, dump_code_signature): Likewise.
(dump_load_command): Dump code signature.
(mach_o_dump): Likewise.
include/mach-o/
2011-12-16 Tristan Gingold <gingold@adacore.com>
* codesign.h: New file.
2011-12-16 10:23:01 +00:00
83c257caea
* readelf.c (get_symbol_type): Add ELFOSABI_FREEBSD to the
...
supported abi's.
* config/obj-elf.c (obj_elf_type): Add ELFOSABI_FREEBSD to the
supported abi's.
2011-12-15 11:37:03 +00:00
12fa714fff
Missing file from my previous commit.
2011-12-13 10:00:40 +00:00
c5012cd8d5
bfd/
...
2011-12-13 Tristan Gingold <gingold@adacore.com>
* mach-o.c (bfd_mach_o_read_symtab_symbols): Make global. Remove
prototype.
(bfd_mach_o_section_get_entry_size): Make global.
(bfd_mach_o_section_get_nbr_indirect): Likewise.
(bfd_mach_o_read_symtab_strtab): Likewise.
(struct bfd_mach_o_xlat_name): Move to mach-o.h
(bfd_mach_o_print_flags): Move to binutils/od-macho.c
(bfd_mach_o_get_name_of_null, bfd_mach_o_get_name): Likewise.
(bfd_mach_o_cpu_name, bfd_mach_o_filetype_name): Likewise.
(bfd_mach_o_header_flags_name): Likewise.
(bfd_mach_o_load_command_name): Likewise.
(bfd_mach_o_print_private_header): Likewise.
(bfd_mach_o_print_section_map, bfd_mach_o_print_section): Likwise.
(bfd_mach_o_print_segment, bfd_mach_o_print_dysymtab): Likewise.
(bfd_mach_o_print_dyld_info): Likewise.
(bfd_mach_o_print_private_bfd_data): Remove.
(bfd_mach_o_type_name): Make global.
(bfd_mach_o_section_attribute_name): Likewise.
* mach-o.h (bfd_mach_o_xlat_name): Added.
(bfd_mach_o_section_get_nbr_indirect)
(bfd_mach_o_section_get_entry_size)
(bfd_mach_o_read_symtab_symbols)
(bfd_mach_o_read_symtab_strtab)
(bfd_mach_o_section_attribute_name)
(bfd_mach_o_section_type_name): Likewise.
* mach-o-target.c (bfd_mach_o_bfd_print_private_bfd_data): Define.
binutils/
2011-12-13 Tristan Gingold <gingold@adacore.com>
* od-macho.c: New file.
* objdump.h (objdump_private_desc_mach_o): Add.
* configure.in: Add Mach-O od_vectors.
* Makefile.am (CFILES): Add od-macho.c
* configure: Regenerate.
* Makefile.in: Regenerate.
2011-12-13 09:13:15 +00:00
4b68bca3c1
2011-12-06 David Daney <david.daney@cavium.com>
...
* readelf.c (dynamic_section_mips_val): Factor out trailing '\n'
from printed strings and move it to the end of the function.
Use BFD_VMA_FMT for printf format specifier for dynamic tag value.
Use print_vma() to print dynamic tag values.
2011-12-07 03:50:10 +00:00
1b31d05e6b
* readelf.c (ia64_process_unwind): Turn into a void funtion.
...
(hppa_process_unwind): Likewise.
(arm_process_unwind): Likewise.
(process_unwind): Likewise.
(arm_get_section_word): Rename to get_unwind_section_word.
Add sym_name parameter to return the offset into the string table
of the symbol associated with the reloc applied to the word.
(decode_tic6x_unwind_regmask): Add NULL argument to invocation of
get_unwind_section_word.
(dump_arm_unwind): Likewise.
(decode_arm_unwind_bytecode): Prepend a comma when *not* the first
register in a list.
(decode_arm_unwind): If the returned function address is 0 and a
valid symname offset is provided use that to compute the name
associated with the entry.
Add extra checks of the compact model index entry.
2011-12-02 17:04:33 +00:00
b3364cb9c2
* ar.c (ranlib_usage): Describe -D.
...
(ranlib_main): Parse -D.
(ranlib_touch): Set BFD_DETERMINISTIC_OUTPUT under -D.
* doc/binutils.texi (ranlib): Describe -D, and also --help/-h/-H.
2011-11-29 18:07:41 +00:00
a734115acd
PR binutils/13421
...
* readelf.c (arm_section_get_word): Add descriptive comments.
Initliase the rel_type field of the arm_sec structure.
(expand_prel31): Rename to arm_expand_prel31.
(dump_arm_unwind): Use new name.
Print the function name based on the function address entry.
2011-11-28 16:51:09 +00:00
e3cb57c393
* binutils-all/objdump.exp (cpus): Add MicroBlaze.
...
(objdump -WL): Skip this test on MCore, Moxie and OpenRisc
targets.
* binutils-all/objcopy.exp (localize-hidden-1): Expect this test
to fail on MIPS based targets.
2011-11-25 14:47:48 +00:00
f48e6c458d
* binutils/readelf.c (process_program_headers): Fix typo printing p_memsz
...
field.
2011-11-11 20:50:38 +00:00
99c513f6ac
[.]
...
* configure.ac (rl78-*-*) New case.
* configure: Regenerate.
[bfd]
* Makefile.am (ALL_MACHINES): Add cpu-rl78.lo.
(ALL_MACHINES_CFILES): Add cpu-rl78.c.
(BFD32_BACKENDS): Add elf32-rl78.lo.
(BFD32_BACKENDS_CFILES): Add elf32-rl78.c.
(Makefile.in): Regenerate.
* archures.c (bfd_architecture): Define bfd_arch_rl78.
(bfd_archures_list): Add bfd_rl78_arch.
* config.bfd: Add rl78-*-elf.
* configure.in: Add bfd_elf32_rl78_vec.
* reloc.c (bfd_reloc_code_type): Add BFD_RELOC_RL78_* relocations.
* targets.c (bfd_target_vector): Add bfd_elf32_rl78_vec.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* libbfd.h: Regenerate.
* cpu-rl78.c: New file.
* elf32-rl78.c: New file.
[binutils]
* readelf.c: Include elf/rl78.h
(guess_is_rela): Handle EM_RL78.
(dump_relocations): Likewise.
(get_machine_name): Likewise.
(is_32bit_abs_reloc): Likewise.
* NEWS: Mention addition of RL78 support.
* MAINTAINERS: Add myself as RL78 port maintainer.
[gas]
* Makefile.am (TARGET_CPU_CFILES): Add tc-rl78.c.
(TARGET_CPU_HFILES): Add rc-rl78.h.
(EXTRA_DIST): Add rl78-parse.c and rl78-parse.y.
(rl78-parse.c, rl78-parse.h, rl78-parse.o, rl78-defs.h): New rules.
* Makefile.in: Regenerate.
* configure.in: Add rl78 case.
* configure: Regenerate.
* configure.tgt: Add rl78 case.
* config/rl78-defs.h: New file.
* config/rl78-parse.y: New file.
* config/tc-rl78.c: New file.
* config/tc-rl78.h: New file.
* NEWS: Add Renesas RL78.
* doc/Makefile.am (c-rl78.texi): New.
* doc/Makefile.in: Likewise.
* doc/all.texi: Enable it.
* doc/as.texi: Add it.
[include]
* dis-asm.h (print_insn_rl78): Declare.
[include/elf]
* common.h (EM_RL78, EM_78K0R): New.
* rl78.h: New.
[include/opcode]
* rl78.h: New file.
[ld]
* Makefile.am (ALL_EMULATION_SOURCES): Add eelf32rl78.c.
(+eelf32rl78.c): New rule.
* Makefile.in: Regenerate.
* configure.tgt: Add rl78-*-* case.
* emulparams/elf32rl78.sh: New file.
* NEWS: Mention addition of Renesas RL78 support.
[opcodes]
* Makefile.am (TARGET_LIBOPCODES_CFILES): Add rl78-decode.c and
rl78-dis.c.
(MAINTAINERCLEANFILES): Add rl78-decode.c.
(rl78-decode.c): New rule, built from rl78-decode.opc and opc2c.
* Makefile.in: Regenerate.
* configure.in: Add bfd_rl78_arch case.
* configure: Regenerate.
* disassemble.c: Define ARCH_rl78.
(disassembler): Add ARCH_rl78 case.
* rl78-decode.c: New file.
* rl78-decode.opc: New file.
* rl78-dis.c: New file.
2011-11-02 03:09:11 +00:00
b3f5b73ba4
* dwarf.c (display_debug_frames): If do_debug_frames_interp,
...
DW_CFA_restore goes to DW_CFA_undefined, not DW_CFA_unreferenced.
2011-10-28 18:27:46 +00:00
ab8b6d29a2
Add myself as TILEPro and TILE-Gx port maintainer.
2011-10-28 14:41:13 +00:00
69f56ae1d3
Mention Tilera support in binutils/NEWS, and fix the TILEPro
...
capitalization in gas/NEWs and ld/NEWS.
2011-10-28 14:37:30 +00:00
5b169225fe
* MAINTAINERS: Add myself as EPIPHANY port maintainer.
2011-10-27 14:13:24 +00:00
506eb5219e
binutils: fix out of tree building with syslex regens
...
If you take a release tarball (which has pregenerated syslex and sysinfo files
in it), apply some patches which touch syslex.l, and then build the result out
of tree, it will fail. This is because syslex.l uses sysinfo.h, but the
sysinfo.y file wasn't updated and so it wasn't regenerated (the files are found
in the $srcdir), and the build rule for syslex.c does not use -I$(srcdir) when
it finds a local file. Simple fix below.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-25 20:39:41 +00:00
cfb8c0921c
bfd:
...
* Makefile.am (ALL_MACHINES): Add cpu-epiphany.lo .
(ALL_MACHINES_CFILES): Add cpu-epiphany.c .
(BFD32_BACKENDS): Add elf32-epiphany.lo .
(BFD32_BACKENDS_CFILES): Add elf32-epiphany.c .
* Makefile.in, bfd-in2.h, configure, libbfd.h: Regenerate.
* archures.c (bfd_arch_epiphany): Add.
(bfd_mach_epiphany16, bfd_mach_epiphany32): Define.
(bfd_epiphany_arch): Declare.
(bfd_archures_list): Add &bfd_epiphany_arch.
* config.bfd (epiphany-*-elf): New target case.
* configure.in (bfd_elf32_epiphany_vec): New target vector case.
* reloc.c (BFD_RELOC_EPIPHANY_SIMM8): New relocation.
(BFD_RELOC_EPIPHANY_SIMM24, BFD_RELOC_EPIPHANY_HIGH): Likewise.
(BFD_RELOC_EPIPHANY_LOW, BFD_RELOC_EPIPHANY_SIMM11): Likewise.
(BFD_RELOC_EPIPHANY_IMM11, BFD_RELOC_EPIPHANY_IMM8): Likewise.
* targets.c (bfd_elf32_epiphany_vec): Declare.
(_bfd_target_vector): Add bfd_elf32_epiphany_vec.
* po/SRC-POTFILES.in, po/bfd.pot: Regenerate.
* cpu-epiphany.c, elf32-epiphany.c: New files.
binutils:
* readelf.c (include "elf/epiphany.h")
(guess_is_rela, dump_relocation): Handle EM_ADAPTEVA_EPIPHANY.
(get_machine_name, is_32bit_abs_reloc, is_32bit_pcrel_reloc): Likewise.
(is_16bit_abs_reloc, is_none_reloc): Likewise.
* po/binutils.pot: Regenerate.
cpu:
* cpu/epiphany.cpu, cpu/epiphany.opc: New files.
gas:
* NEWS: Mention addition of Adapteva Epiphany support.
* config/tc-epiphany.c, config/tc-epiphany.h: New files.
* Makefile.am (TARGET_CPU_CFILES): Add config/tc-epiphany.c .
(TARGET_CPU_HFILES): Add config/tc-epiphany.h .
* Makefile.in, configure, doc/Makefile.in, po/POTFILES.in: Regenerate.
* configure.in: Also set using_cgen for epiphany.
* configure.tgt: Handle epiphany.
* doc/Makefile.am (CPU_DOCS): Add c-epiphany.texi .
* doc/all.texi: Set EPIPHANY.
* doc/as.texinfo: Add EPIPHANY-specific text.
* doc/c-epiphany.texi: New file.
* po/gas.pot: Regenerate.
gas/testsuite:
* gas/epiphany: New directory.
include:
* dis-asm.h (print_insn_epiphany): Declare.
* elf/epiphany.h: New file.
* elf/common.h (EM_ADAPTEVA_EPIPHANY): Define.
ld:
* NEWS: Mention addition of Adapteva Epiphany support.
* Makefile.am (ALL_EMULATION_SOURCES): Add eelf32epiphany.c .
(eelf32epiphany.c): New rule.
* Makefile.in: Regenerate.
* configure.tgt: Handle epiphany-*-elf.
* po/ld.pot: Regenerate.
* testsuite/ld-srec/srec.exp: xfail epiphany.
* emulparams/elf32epiphany.sh: New file.
opcodes:
* Makefile.am (HFILES): Add epiphany-desc.h and epiphany-opc.h .
(TARGET_LIBOPCODES_CFILES): Add epiphany-asm.c, epiphany-desc.c,
epiphany-dis.c, epiphany-ibld.c and epiphany-opc.c .
(CLEANFILES): Add stamp-epiphany.
(EPIPHANY_DEPS): Set. Make CGEN-generated Epiphany files depend on it.
(stamp-epiphany): New rule.
* Makefile.in, configure, po/POTFILES.in, po/opcodes.pot: Regenerate.
* configure.in: Handle bfd_epiphany_arch.
* disassemble.c (ARCH_epiphany): Define.
(disassembler): Handle bfd_arch_epiphany.
* epiphany-asm.c, epiphany-desc.c, epiphany-desc.h: New files.
* epiphany-dis.c, epiphany-ibld.c, epiphany-opc.c: Likewise.
* epiphany-opc.h: Likewise.
2011-10-25 11:18:16 +00:00
81472056d7
2011-10-25 Kai Tietz <ktietz@redhat.com>
...
* winduni.h (unicode_from_ascii_len): New prototype.
* winduni.c (unicode_from_ascii_len): New function.
* windres.h (define_stringtable): Add additional length argument.
* windres.c (define_stringtable): Add length argument for string.
* rcparse.y (res_unicode_sizedstring): New rule.
(res_unicode_sizedstring_concat): Likewise.
(string_data): Adjust rule.
2011-10-25 Kai Tietz <ktietz@redhat.com>
* binutils-all/windres/strtab4.rc: New test.
* binutils-all/windres/strtab4.rsd: Likewise.
2011-10-25 08:03:18 +00:00
a7a0b6a5be
binutils/
...
* dwarf.c (read_and_display_attr_value) <DW_AT_import>: Add CU_OFFSET
also for DW_FORM_ref_udata.
2011-10-24 14:28:02 +00:00
07725569e1
Updated Japanese translation
2011-10-24 11:51:22 +00:00
746c5e8cf0
Set target from the the first object only if it isn't set.
...
2011-10-16 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/13278
* ar.c (open_inarch): Set the target from the the first object
on the list only if it isn't set.
2011-10-16 19:36:10 +00:00
9cf03b7e41
2011-10-13 Nick Clifton <nickc@redhat.com>
...
Fixes to aid translation:
* addr2line.c (translate_address): Add comments describing context
of a couple of printf statements.
* ar.c (write_archive): Allow translation of error message.
* bucomm.c (endian_string): Allow translation of strings.
(display_target_list): Allow translation.
* coffdump.c (dump_coff_type): Allow translation of output.
(dump_coff_where): Likewise.
(dump_coff_symbol): Likewise.
(dump_coff_scope): Likewise.
(dump_coff_sfile): Likewise.
(dump_coff_section): Likewise.
(coff_dump): Likewise.
* dlltool (def_version): Allow translation of output.
(run): Likewise.
* dllwrap.c (run): Allow translation of output.
* dwarf.c (print_dwarf_vma): Allow translation of output.
(process_extended_line_op): Remove spurious translation.
Add translation for strings that can be translated.
(decode_location_exression): Allow translation of output.
(read_and_display_attr_value): Allow translation of output.
* readelf.c (slurp_rela_relocs): Add translation for error
messages when failing to get data.
(slurp_rel_relocs): Likewise.
(get_32bit_elf_symbols): Likewise.
(get_64bit_elf_symbols): Likewise.
(dump_ia64_vms_dynamic_relocs): Replace abbreviation with full
word.
(process_relocs): Remove spurious translation.
(decode_tic6x_unwind_bytecode): Likewise.
(process_version_section): Improve error messages.
(process_mips_specific): Likewise.
(print_gnu_note): Remove spurious translation.
(print_stapsdt_note): Likewise.
(get_ia64_vms_note_type): Likewise.
* sysdump.c (getCHARS): Allow translation.
(fillup): Allow translation of output.
(getone): Likewise.
(must): Likewise.
(derived_type): Likewise.
* doc/binutils.doc (addr2line): Extend description of command line
options.
* po/binutils.pot: Regenerate.
2011-10-13 15:33:34 +00:00
ba5cdace0d
PR binutils/13219
...
* readelf.c (GET_ELF_SYMBOLS): Add sym_count parameter.
(get_32bit_elf_symbols): Add num_syms_return argument.
Return the number of symbols loaded into the symbol table.
(get_64bit_elf_symbols): Likewise.
(process_section_headers): Use GET_ELF_SYMBOLS to initialise
symbol count.
(proces_relocs): Likewise.
(ia64_process_unwind): Likewise.
(hppa_process_unwind): Likewise.
(arm_process_unwind): Likewise.
(process_dynamic_section): Likewise.
(process_version_sections): Likewise.
(process_symbol_table): Likewise.
(process_section_groups): Likewise.
Add check before indexing into the symbol table.
(apply_relocations): Likewise.
2011-10-13 09:33:02 +00:00
bfb6c1ab1e
PR binutils/13051
...
Fix a syntax error bug when compiling rc files with the VERSIONINFO resource
containing more than one language block inside a single StringFileInfo block.
* windint.h (rc_ver_stringtable): New structure definition.
(rc_ver_info): Use it.
* rcparse.y (verstringtable): New variable.
(verstringtables): New type.
(verstringtables:): New rule declaration.
(verblocks:): Use it.
* resrc.c (append_ver_stringtable): New function.
(append_ver_stringfileinfo): Update to use stringtables.
* windres.h (append_ver_stringfileinfo): Update declaration.
(append_ver_stringtable): New declaration.
* resrc.c (write_rc_versioninfo): Update to support multiple blocks.
* resbin.c (bin_to_res_version): Likewise.
(res_to_bin_versioninfo): Likewise.
* binutils-all\windres\version.rsd: Regenerate.
* binutils-all\windres\version_cat.rsd: Regenerate.
* binutils-all\windres\version_mlang.rc: Add new test.
* binutils-all\windres\version_mlang.rsd: Likewise.
2011-10-11 15:56:29 +00:00
d569865703
Updated Bulgarian, Spanish, Finnish, French, Russian and Ukranian translations.
2011-10-10 16:12:24 +00:00
639e9644ec
Don't run dw2-decodedline.S on ia64.
...
2011-10-07 H.J. Lu <hongjiu.lu@intel.com>
* binutils-all/objdump.exp: Don't run dw2-decodedline.S on ia64.
2011-10-07 20:13:54 +00:00
d4cb0ea0ca
* readelf.c (get_machine_dlags): Add support for RX's PID mode.
...
* ld-scripts/phdrs.exp: Expect to fail for the RX.
* elf32-rx.c: Add support for PID mode.
(rx_elf_relocate_section): Add checks for unsafe PID relocations.
Include addend in R_RX_SYM relocations.
* config/rx-defs.h (rx_pid_register): New.
(rx_gp_register): New.
* config/rx-parse.y (rx_lex): Add support for %gpreg and %pidreg.
(displacement): Add PID support.
* config/tc-rx.c (rx_pid_mode): New.
(rx_num_int_regs): New.
(rx_pid_register): New.
(rx_gp_register): New.
(options): Add -mpid and -mint-register= options.
(md_longopts): Likewise.
(md_parse_option): Likewise.
(md_show_usage): Likewise.
(rx_pid_symbol): New.
(rx_pidreg_symbol): New.
(rx_gpreg_symbol): New.
(md_begin): Support PID.
(rx_validate_fix_sub): Support PID.
(tc_gen_reloc): Support PID.
* doc/c-rx.texi: Document PID support.
* rx.h (E_FLAG_RX_PID): New.
2011-10-05 14:13:31 +00:00
4eee63bce8
binutils/
...
2011-10-04 Paul Woegerer <paul_woegerer@mentor.com>
Carlos O'Donell <carlos@codesourcery.com>
* dwarf.c (display_debug_lines_decoded): Index directory_table with
directory_index from file_table entry.
binutils/testsuite/
2011-10-04 Carlos O'Donell <carlos@codesourcery.com>
* binutils-all/dw2-decodedline.S: New file.
* binutils-all/objdump.WL: New file.
* binutils-all/objdump.exp: Update copyright year.
New test case for -WL.
2011-10-04 14:25:40 +00:00
48049d1ee9
* binutils/dwarf.h (dwarf_section_display_enum): Add missing enum
...
constant.
2011-09-30 21:06:00 +00:00
766ad87609
* binutils/testsuite/binutils-all/elfedit-4.d: Give test a unique name.
2011-09-28 16:43:20 +00:00
a82526dd00
2011-09-28 Tristan Gingold <gingold@adacore.com>
...
* od-xcoff.c (dump_xcoff32_aout_header): Fix typo.
2011-09-28 07:22:39 +00:00
21eb9156ec
2011-09-27 Tristan Gingold <gingold@adacore.com>
...
* od-xcoff.c (dump_xcoff32_aout_header): Remove some gettext macros.
(dump_xcoff32_sections_header): Likewise.
(dump_xcoff32_symbols, dump_xcoff32_relocs): Likewise.
(dump_xcoff32_lineno, dump_xcoff32_loader): Likewise.
(dump_xcoff32_except): Likewise.
(dump_xcoff32_typchk, dump_xcoff32_tbtags): Likewise.
2011-09-27 12:48:01 +00:00
4a5cb34fc9
2011-09-27 Tristan Gingold <gingold@adacore.com>
...
* readelf.c (print_ia64_vms_note): Fix xgettext warnings.
2011-09-27 12:05:33 +00:00
a7142d9403
binutils/
...
2011-09-22 Tristan Gingold <gingold@adacore.com>
* NEWS: Add marker for 2.22.
gas/
2011-09-22 Tristan Gingold <gingold@adacore.com>
* NEWS: Add marker for 2.22.
ld/
2011-09-22 Tristan Gingold <gingold@adacore.com>
* NEWS: Add marker for 2.22.
2011-09-22 08:11:16 +00:00
9e8c70f96b
Annotate sparc objects with cpu hardware capabilities used.
...
bfd/
* elfxx-sparc.c (_bfd_sparc_elf_merge_private_bfd_data): New.
* elfxx-sparc.h: Declare it.
* elf32-sparc.c (elf32_sparc_merge_private_bfd_data): Call it.
* elf64-sparc.c (elf64_sparc_merge_private_bfd_data): Likewise.
binutils/
* readelf.c (display_sparc_hwcaps): New.
(display_sparc_gnu_attribute): New.
(process_sparc_specific): New.
(process_arch_specific): When EM_SPARC, EM_SPARC32PLUS,
or EM_SPARCV9 invoke process_sparc_specific.
gas/
* config/tc-sparc.c (hwcap_seen): New bitmask, defined when
not TE_SOLARIS.
(sparc_ip): When not TE_SOLARIS, accumulate hwcap bits from
sparc_opcode->flags of instruction into hwcap_seen.
(sparc_md_end): Create Tag_GNU_Sparc_HWCAPS attribute if
hwcap_seen is non-zero and not TE_SOLARIS.
gas/testsuite/
* gas/sparc/hpcvis3.s: Update for fixed fchksum16 mnemonic.
* gas/sparc/hpcvis3.d: Likewise.
include/elf/
* sparc.h (Tag_GNU_Sparc_HWCAPS): New object attribute.
(ELF_SPARC_HWCAP_*): New HWCAPS bitmask values.
include/opcode/
* sparc.h (struct sparc_opcode): Expand 'flags' to unsigned int.
(F_MUL32, F_DIV32, F_FSMULD, F_V8PLUS, F_POPC, F_VIS, F_VIS2,
F_ASI_BLK_INIT, F_FMAF, F_VIS3, F_HPC, F_RANDOM, F_TRANS,
F_FJFMAU, F_IMA, F_ASI_CACHE_SPARING): New flag bits.
opcodes/
* sparc-opc.c (sparc_opcodes): Annotate table with HWCAP flag
bits. Fix "fchksm16" mnemonic.
2011-09-21 20:49:16 +00:00
cdd30861d6
* MAINTAINER: Take over from Jakub Jalinek as SPARC maintainer.
2011-09-21 18:39:48 +00:00
b3681d67e4
Check zero address size.
...
2011-09-18 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/13196
* dwarf.c (display_debug_aranges): Check zero address size.
2011-09-18 16:50:17 +00:00
4c8e8a7ee0
Remove the group section if all members are removed.
...
binutils/
2011-09-15 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/13180
* objcopy.c (is_strip_section_1): New.
(is_strip_section): Use it. Remove the group section if all
members are removed.
binutils/testsuite/
2011-09-15 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/13180
* binutils-all/group-6.d: New.
* binutils-all/group-6.s: Likewise.
* binutils-all/objcopy.exp: Run group-6 for ELF targrts.
2011-09-16 04:23:19 +00:00
7b01d2c3ae
* po/ja.po: Updated Japanese translation.
2011-09-08 16:09:57 +00:00
7cf8042268
Updated Spanish translations.
2011-08-26 15:15:52 +00:00
066a66625f
PR binutils/12964
...
* Makefile.am (embedspu): Use awk rather than sed.
* Makefile.in: Regenerate.
2011-08-08 00:27:15 +00:00
212b606321
binutils/
...
* dwarf.c (read_and_display_attr_value): Recognize DW_FORM_data4 and
DW_FORM_data8 as location list pointers only for DWARF < 4.
2011-07-27 16:40:59 +00:00
4ccf1e317a
* dwarf2.c (dwarf_debug_sections): Add .debug_macro
...
and .zdebug_macro entry.
(dwarf_debug_section_enum): Add debug_macro.
* NEWS: Mention .debug_macro support.
* dwarf.c (read_and_display_attr_value): Don't print a tab
if attribute is 0.
(get_AT_name): Handle DW_AT_GNU_macros.
(get_line_filename_and_dirname, display_debug_macro): New
functions.
(debug_displays): Add an entry for .debug_macro and .zdebug_macro.
* readelf.c (process_section_headers): With do_debug_macinfo
handle also .debug_macro sections.
* dwarf.h (dwarf_section_display_enum): Add macro.
2011-07-26 21:31:37 +00:00
df58fc944d
bfd/
...
2011-02-25 Chao-ying Fu <fu@mips.com>
Ilie Garbacea <ilie@mips.com>
Maciej W. Rozycki <macro@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
Catherine Moore <clm@codesourcery.com>
Richard Sandiford <rdsandiford@googlemail.com>
* archures.c (bfd_mach_mips_micromips): New macro.
* cpu-mips.c (I_micromips): New enum value.
(arch_info_struct): Add bfd_mach_mips_micromips.
* elfxx-mips.h (_bfd_mips_elf_is_target_special_symbol): New
prototype.
(_bfd_mips_elf_relax_section): Likewise.
(_bfd_mips16_elf_reloc_unshuffle): Rename to...
(_bfd_mips_elf_reloc_unshuffle): ... this. Handle microMIPS
ASE.
(_bfd_mips16_elf_reloc_shuffle): Rename to...
(_bfd_mips_elf_reloc_shuffle): ... this. Handle microMIPS ASE.
(gprel16_reloc_p): Handle microMIPS ASE.
(literal_reloc_p): New function.
* elf32-mips.c (elf_micromips_howto_table_rel): New variable.
(_bfd_mips_elf32_gprel16_reloc): Handle microMIPS ASE.
(mips16_gprel_reloc): Update for _bfd_mips_elf_reloc_unshuffle
and _bfd_mips_elf_reloc_shuffle changes.
(mips_elf_gprel32_reloc): Update comment.
(micromips_reloc_map): New variable.
(bfd_elf32_bfd_reloc_type_lookup): Handle microMIPS ASE.
(mips_elf32_rtype_to_howto): Likewise.
(mips_info_to_howto_rel): Likewise.
(bfd_elf32_bfd_is_target_special_symbol): Define.
(bfd_elf32_bfd_relax_section): Likewise.
* elf64-mips.c (micromips_elf64_howto_table_rel): New variable.
(micromips_elf64_howto_table_rela): Likewise.
(mips16_gprel_reloc): Update for _bfd_mips_elf_reloc_unshuffle
and _bfd_mips_elf_reloc_shuffle changes.
(micromips_reloc_map): Likewise.
(bfd_elf64_bfd_reloc_type_lookup): Handle microMIPS ASE.
(bfd_elf64_bfd_reloc_name_lookup): Likewise.
(mips_elf64_rtype_to_howto): Likewise.
(bfd_elf64_bfd_is_target_special_symbol): Define.
* elfn32-mips.c (elf_micromips_howto_table_rel): New variable.
(elf_micromips_howto_table_rela): Likewise.
(mips16_gprel_reloc): Update for _bfd_mips_elf_reloc_unshuffle
and _bfd_mips_elf_reloc_shuffle changes.
(micromips_reloc_map): Likewise.
(bfd_elf32_bfd_reloc_type_lookup): Handle microMIPS ASE.
(bfd_elf32_bfd_reloc_name_lookup): Likewise.
(mips_elf_n32_rtype_to_howto): Likewise.
(bfd_elf32_bfd_is_target_special_symbol): Define.
* elfxx-mips.c (LA25_LUI_MICROMIPS_1): New macro.
(LA25_LUI_MICROMIPS_2): Likewise.
(LA25_J_MICROMIPS_1, LA25_J_MICROMIPS_2): Likewise.
(LA25_ADDIU_MICROMIPS_1, LA25_ADDIU_MICROMIPS_2): Likewise.
(TLS_RELOC_P): Handle microMIPS ASE.
(mips_elf_create_stub_symbol): Adjust value of stub symbol if
target is a microMIPS function.
(micromips_reloc_p): New function.
(micromips_reloc_shuffle_p): Likewise.
(got16_reloc_p, call16_reloc_p): Handle microMIPS ASE.
(got_disp_reloc_p, got_page_reloc_p): New functions.
(got_ofst_reloc_p): Likewise.
(got_hi16_reloc_p, got_lo16_reloc_p): Likewise.
(call_hi16_reloc_p, call_lo16_reloc_p): Likewise.
(hi16_reloc_p, lo16_reloc_p, jal_reloc_p): Handle microMIPS ASE.
(micromips_branch_reloc_p): New function.
(tls_gd_reloc_p, tls_ldm_reloc_p): Likewise.
(tls_gottprel_reloc_p): Likewise.
(_bfd_mips16_elf_reloc_unshuffle): Rename to...
(_bfd_mips_elf_reloc_unshuffle): ... this. Handle microMIPS
ASE.
(_bfd_mips16_elf_reloc_shuffle): Rename to...
(_bfd_mips_elf_reloc_shuffle): ... this. Handle microMIPS ASE.
(_bfd_mips_elf_lo16_reloc): Handle microMIPS ASE.
(mips_tls_got_index, mips_elf_got_page): Likewise.
(mips_elf_create_local_got_entry): Likewise.
(mips_elf_relocation_needs_la25_stub): Likewise.
(mips_elf_calculate_relocation): Likewise.
(mips_elf_perform_relocation): Likewise.
(_bfd_mips_elf_symbol_processing): Likewise.
(_bfd_mips_elf_add_symbol_hook): Likewise.
(_bfd_mips_elf_link_output_symbol_hook): Likewise.
(mips_elf_add_lo16_rel_addend): Likewise.
(_bfd_mips_elf_check_relocs): Likewise.
(mips_elf_adjust_addend): Likewise.
(_bfd_mips_elf_relocate_section): Likewise.
(mips_elf_create_la25_stub): Likewise.
(_bfd_mips_vxworks_finish_dynamic_symbol): Likewise.
(_bfd_mips_elf_gc_sweep_hook): Likewise.
(_bfd_mips_elf_is_target_special_symbol): New function.
(mips_elf_relax_delete_bytes): Likewise.
(opcode_descriptor): New structure.
(RA): New macro.
(OP32_SREG, OP32_TREG, OP16_VALID_REG): Likewise.
(b_insns_32, bc_insn_32, bz_insn_32, bzal_insn_32): New variables.
(beq_insn_32): Likewise.
(b_insn_16, bz_insn_16): New variables.
(BZC32_REG_FIELD): New macro.
(bz_rs_insns_32, bz_rt_insns_32): New variables.
(bzc_insns_32, bz_insns_16):Likewise.
(BZ16_REG, BZ16_REG_FIELD): New macros.
(jal_insn_32_bd16, jal_insn_32_bd32): New variables.
(jal_x_insn_32_bd32): Likewise.
(j_insn_32, jalr_insn_32): Likewise.
(ds_insns_32_bd16, ds_insns_32_bd32): Likewise.
(jalr_insn_16_bd16, jalr_insn_16_bd32, jr_insn_16): Likewise.
(JR16_REG): New macro.
(ds_insns_16_bd16): New variable.
(lui_insn): Likewise.
(addiu_insn, addiupc_insn): Likewise.
(ADDIUPC_REG_FIELD): New macro.
(MOVE32_RD, MOVE32_RS): Likewise.
(MOVE16_RD_FIELD, MOVE16_RS_FIELD): Likewise.
(move_insns_32, move_insns_16): New variables.
(nop_insn_32, nop_insn_16): Likewise.
(MATCH): New macro.
(find_match): New function.
(check_br16_dslot, check_br32_dslot): Likewise.
(check_br16, check_br32): Likewise.
(IS_BITSIZE): New macro.
(check_4byte_branch): New function.
(_bfd_mips_elf_relax_section): Likewise.
(_bfd_mips_elf_merge_private_bfd_data): Disallow linking MIPS16
and microMIPS modules together.
(_bfd_mips_elf_print_private_bfd_data): Handle microMIPS ASE.
* reloc.c (BFD_RELOC_MICROMIPS_7_PCREL_S1): New relocation.
(BFD_RELOC_MICROMIPS_10_PCREL_S1): Likewise.
(BFD_RELOC_MICROMIPS_16_PCREL_S1): Likewise.
(BFD_RELOC_MICROMIPS_GPREL16): Likewise.
(BFD_RELOC_MICROMIPS_JMP, BFD_RELOC_MICROMIPS_HI16): Likewise.
(BFD_RELOC_MICROMIPS_HI16_S): Likewise.
(BFD_RELOC_MICROMIPS_LO16): Likewise.
(BFD_RELOC_MICROMIPS_LITERAL): Likewise.
(BFD_RELOC_MICROMIPS_GOT16): Likewise.
(BFD_RELOC_MICROMIPS_CALL16): Likewise.
(BFD_RELOC_MICROMIPS_GOT_HI16): Likewise.
(BFD_RELOC_MICROMIPS_GOT_LO16): Likewise.
(BFD_RELOC_MICROMIPS_CALL_HI16): Likewise.
(BFD_RELOC_MICROMIPS_CALL_LO16): Likewise.
(BFD_RELOC_MICROMIPS_SUB): Likewise.
(BFD_RELOC_MICROMIPS_GOT_PAGE): Likewise.
(BFD_RELOC_MICROMIPS_GOT_OFST): Likewise.
(BFD_RELOC_MICROMIPS_GOT_DISP): Likewise.
(BFD_RELOC_MICROMIPS_HIGHEST): Likewise.
(BFD_RELOC_MICROMIPS_HIGHER): Likewise.
(BFD_RELOC_MICROMIPS_SCN_DISP): Likewise.
(BFD_RELOC_MICROMIPS_JALR): Likewise.
(BFD_RELOC_MICROMIPS_TLS_GD): Likewise.
(BFD_RELOC_MICROMIPS_TLS_LDM): Likewise.
(BFD_RELOC_MICROMIPS_TLS_DTPREL_HI16): Likewise.
(BFD_RELOC_MICROMIPS_TLS_DTPREL_LO16): Likewise.
(BFD_RELOC_MICROMIPS_TLS_GOTTPREL): Likewise.
(BFD_RELOC_MICROMIPS_TLS_TPREL_HI16): Likewise.
(BFD_RELOC_MICROMIPS_TLS_TPREL_LO16): Likewise.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
binutils/
2011-02-25 Chao-ying Fu <fu@mips.com>
Maciej W. Rozycki <macro@codesourcery.com>
* readelf.c (get_machine_flags): Handle microMIPS ASE.
(get_mips_symbol_other): Likewise.
gas/
2011-02-25 Maciej W. Rozycki <macro@codesourcery.com>
Chao-ying Fu <fu@mips.com>
Richard Sandiford <rdsandiford@googlemail.com>
* config/tc-mips.h (mips_segment_info): Add one bit for
microMIPS.
(TC_LABEL_IS_LOCAL): New macro.
(mips_label_is_local): New prototype.
* config/tc-mips.c (S0, S7): New macros.
(emit_branch_likely_macro): New variable.
(mips_set_options): Add micromips.
(mips_opts): Initialise micromips to -1.
(file_ase_micromips): New variable.
(CPU_HAS_MICROMIPS): New macro.
(hilo_interlocks): Set for microMIPS too.
(gpr_interlocks): Likewise.
(cop_interlocks): Likewise.
(cop_mem_interlocks): Likewise.
(HAVE_CODE_COMPRESSION): New macro.
(micromips_op_hash): New variable.
(micromips_nop16_insn, micromips_nop32_insn): New variables.
(NOP_INSN): Handle microMIPS ASE.
(mips32_to_micromips_reg_b_map): New macro.
(mips32_to_micromips_reg_c_map): Likewise.
(mips32_to_micromips_reg_d_map): Likewise.
(mips32_to_micromips_reg_e_map): Likewise.
(mips32_to_micromips_reg_f_map): Likewise.
(mips32_to_micromips_reg_g_map): Likewise.
(mips32_to_micromips_reg_l_map): Likewise.
(mips32_to_micromips_reg_n_map): Likewise.
(mips32_to_micromips_reg_h_map): New variable.
(mips32_to_micromips_reg_m_map): Likewise.
(mips32_to_micromips_reg_q_map): Likewise.
(micromips_to_32_reg_h_map): New variable.
(micromips_to_32_reg_i_map): Likewise.
(micromips_to_32_reg_m_map): Likewise.
(micromips_to_32_reg_q_map): Likewise.
(micromips_to_32_reg_b_map): New macro.
(micromips_to_32_reg_c_map): Likewise.
(micromips_to_32_reg_d_map): Likewise.
(micromips_to_32_reg_e_map): Likewise.
(micromips_to_32_reg_f_map): Likewise.
(micromips_to_32_reg_g_map): Likewise.
(micromips_to_32_reg_l_map): Likewise.
(micromips_to_32_reg_n_map): Likewise.
(micromips_imm_b_map, micromips_imm_c_map): New macros.
(RELAX_DELAY_SLOT_16BIT): New macro.
(RELAX_DELAY_SLOT_SIZE_FIRST): Likewise.
(RELAX_DELAY_SLOT_SIZE_SECOND): Likewise.
(RELAX_MICROMIPS_ENCODE, RELAX_MICROMIPS_P): New macros.
(RELAX_MICROMIPS_TYPE, RELAX_MICROMIPS_AT): Likewise.
(RELAX_MICROMIPS_U16BIT, RELAX_MICROMIPS_UNCOND): Likewise.
(RELAX_MICROMIPS_COMPACT, RELAX_MICROMIPS_LINK): Likewise.
(RELAX_MICROMIPS_RELAX32, RELAX_MICROMIPS_TOOFAR16): Likewise.
(RELAX_MICROMIPS_MARK_TOOFAR16): Likewise.
(RELAX_MICROMIPS_CLEAR_TOOFAR16): Likewise.
(RELAX_MICROMIPS_TOOFAR32): Likewise.
(RELAX_MICROMIPS_MARK_TOOFAR32): Likewise.
(RELAX_MICROMIPS_CLEAR_TOOFAR32): Likewise.
(INSERT_OPERAND, EXTRACT_OPERAND): Handle microMIPS ASE.
(mips_macro_warning): Add delay_slot_16bit_p, delay_slot_32bit_p,
fsize and insns.
(mips_mark_labels): New function.
(mips16_small, mips16_ext): Remove variables, replacing with...
(forced_insn_size): ... this.
(append_insn, mips16_ip): Update accordingly.
(micromips_insn_length): New function.
(insn_length): Return the length of microMIPS instructions.
(mips_record_mips16_mode): Rename to...
(mips_record_compressed_mode): ... this. Handle microMIPS ASE.
(install_insn): Handle microMIPS ASE.
(reglist_lookup): New function.
(is_size_valid, is_delay_slot_valid): Likewise.
(md_begin): Handle microMIPS ASE.
(md_assemble): Likewise. Update for append_insn interface change.
(micromips_reloc_p): New function.
(got16_reloc_p): Handle microMIPS ASE.
(hi16_reloc_p): Likewise.
(lo16_reloc_p): Likewise.
(jmp_reloc_p): New function.
(jalr_reloc_p): Likewise.
(matching_lo_reloc): Handle microMIPS ASE.
(insn_uses_reg, reg_needs_delay): Likewise.
(mips_move_labels): Likewise.
(mips16_mark_labels): Rename to...
(mips_compressed_mark_labels): ... this. Handle microMIPS ASE.
(gpr_mod_mask): New function.
(gpr_read_mask, gpr_write_mask): Handle microMIPS ASE.
(fpr_read_mask, fpr_write_mask): Likewise.
(insns_between, nops_for_vr4130, nops_for_insn): Likewise.
(fix_loongson2f_nop, fix_loongson2f_jump): Likewise.
(MICROMIPS_LABEL_CHAR): New macro.
(micromips_target_label, micromips_target_name): New variables.
(micromips_label_name, micromips_label_expr): New functions.
(micromips_label_inc, micromips_add_label): Likewise.
(mips_label_is_local): Likewise.
(micromips_map_reloc): Likewise.
(can_swap_branch_p): Handle microMIPS ASE.
(append_insn): Add expansionp argument. Handle microMIPS ASE.
(start_noreorder, end_noreorder): Handle microMIPS ASE.
(macro_start, macro_warning, macro_end): Likewise.
(brk_fmt, cop12_fmt, jalr_fmt, lui_fmt): New variables.
(mem12_fmt, mfhl_fmt, shft_fmt, trap_fmt): Likewise.
(BRK_FMT, COP12_FMT, JALR_FMT, LUI_FMT): New macros.
(MEM12_FMT, MFHL_FMT, SHFT_FMT, TRAP_FMT): Likewise.
(macro_build): Handle microMIPS ASE. Update for append_insn
interface change.
(mips16_macro_build): Update for append_insn interface change.
(macro_build_jalr): Handle microMIPS ASE.
(macro_build_lui): Likewise. Simplify.
(load_register): Handle microMIPS ASE.
(load_address): Likewise.
(move_register): Likewise.
(macro_build_branch_likely): New function.
(macro_build_branch_ccl): Likewise.
(macro_build_branch_rs): Likewise.
(macro_build_branch_rsrt): Likewise.
(macro): Handle microMIPS ASE.
(validate_micromips_insn): New function.
(expr_const_in_range): Likewise.
(mips_ip): Handle microMIPS ASE.
(options): Add OPTION_MICROMIPS and OPTION_NO_MICROMIPS.
(md_longopts): Add mmicromips and mno-micromips.
(md_parse_option): Handle OPTION_MICROMIPS and
OPTION_NO_MICROMIPS.
(mips_after_parse_args): Handle microMIPS ASE.
(md_pcrel_from): Handle microMIPS relocations.
(mips_force_relocation): Likewise.
(md_apply_fix): Likewise.
(mips_align): Handle microMIPS ASE.
(s_mipsset): Likewise.
(s_cpload, s_cpsetup, s_cpreturn): Use relocation wrappers.
(s_dtprel_internal): Likewise.
(s_gpword, s_gpdword): Likewise.
(s_insn): Handle microMIPS ASE.
(s_mips_stab): Likewise.
(relaxed_micromips_32bit_branch_length): New function.
(relaxed_micromips_16bit_branch_length): New function.
(md_estimate_size_before_relax): Handle microMIPS ASE.
(mips_fix_adjustable): Likewise.
(tc_gen_reloc): Handle microMIPS relocations.
(mips_relax_frag): Handle microMIPS ASE.
(md_convert_frag): Likewise.
(mips_frob_file_after_relocs): Likewise.
(mips_elf_final_processing): Likewise.
(mips_nop_opcode): Likewise.
(mips_handle_align): Likewise.
(md_show_usage): Handle microMIPS options.
* symbols.c (TC_LABEL_IS_LOCAL): New macro.
(S_IS_LOCAL): Add a TC_LABEL_IS_LOCAL check.
* doc/as.texinfo (Target MIPS options): Add -mmicromips and
-mno-micromips.
(-mmicromips, -mno-micromips): New options.
* doc/c-mips.texi (-mmicromips, -mno-micromips): New options.
(MIPS ISA): Document .set micromips and .set nomicromips.
(MIPS insn): Update for microMIPS support.
gas/testsuite/
2011-02-25 Maciej W. Rozycki <macro@codesourcery.com>
Chao-ying Fu <fu@mips.com>
Richard Sandiford <rdsandiford@googlemail.com>
* gas/mips/micromips.d: New test.
* gas/mips/micromips-branch-delay.d: Likewise.
* gas/mips/micromips-branch-relax.d: Likewise.
* gas/mips/micromips-branch-relax-pic.d: Likewise.
* gas/mips/micromips-size-1.d: Likewise.
* gas/mips/micromips-trap.d: Likewise.
* gas/mips/micromips.l: New stderr output.
* gas/mips/micromips-branch-delay.l: Likewise.
* gas/mips/micromips-branch-relax.l: Likewise.
* gas/mips/micromips-branch-relax-pic.l: Likewise.
* gas/mips/micromips-size-0.l: New list test.
* gas/mips/micromips-size-1.l: New stderr output.
* gas/mips/micromips.s: New test source.
* gas/mips/micromips-branch-delay.s: Likewise.
* gas/mips/micromips-branch-relax.s: Likewise.
* gas/mips/micromips-size-0.s: Likewise.
* gas/mips/micromips-size-1.s: Likewise.
* gas/mips/mips.exp: Run the new tests.
* gas/mips/dli.s: Use .p2align.
* gas/mips/elf_ase_micromips.d: New test.
* gas/mips/elf_ase_micromips-2.d: Likewise.
* gas/mips/micromips@abs.d: Likewise.
* gas/mips/micromips@add.d: Likewise.
* gas/mips/micromips@alnv_ps-swap.d: Likewise.
* gas/mips/micromips@and.d: Likewise.
* gas/mips/micromips@beq.d: Likewise.
* gas/mips/micromips@bge.d: Likewise.
* gas/mips/micromips@bgeu.d: Likewise.
* gas/mips/micromips@blt.d: Likewise.
* gas/mips/micromips@bltu.d: Likewise.
* gas/mips/micromips@branch-likely.d: Likewise.
* gas/mips/micromips@branch-misc-1.d: Likewise.
* gas/mips/micromips@branch-misc-2-64.d: Likewise.
* gas/mips/micromips@branch-misc-2.d: Likewise.
* gas/mips/micromips@branch-misc-2pic-64.d: Likewise.
* gas/mips/micromips@branch-misc-2pic.d: Likewise.
* gas/mips/micromips@branch-misc-4-64.d: Likewise.
* gas/mips/micromips@branch-misc-4.d: Likewise.
* gas/mips/micromips@branch-self.d: Likewise.
* gas/mips/micromips@cache.d: Likewise.
* gas/mips/micromips@daddi.d: Likewise.
* gas/mips/micromips@dli.d: Likewise.
* gas/mips/micromips@elf-jal.d: Likewise.
* gas/mips/micromips@elf-rel2.d: Likewise.
* gas/mips/micromips@elfel-rel2.d: Likewise.
* gas/mips/micromips@elf-rel4.d: Likewise.
* gas/mips/micromips@jal-svr4pic.d: Likewise.
* gas/mips/micromips@jal-svr4pic-noreorder.d: Likewise.
* gas/mips/micromips@lb-svr4pic-ilocks.d: Likewise.
* gas/mips/micromips@li.d: Likewise.
* gas/mips/micromips@loc-swap-dis.d: Likewise.
* gas/mips/micromips@loc-swap.d: Likewise.
* gas/mips/micromips@mips1-fp.d: Likewise.
* gas/mips/micromips@mips32-cp2.d: Likewise.
* gas/mips/micromips@mips32-imm.d: Likewise.
* gas/mips/micromips@mips32-sf32.d: Likewise.
* gas/mips/micromips@mips32.d: Likewise.
* gas/mips/micromips@mips32r2-cp2.d: Likewise.
* gas/mips/micromips@mips32r2-fp32.d: Likewise.
* gas/mips/micromips@mips32r2-sync.d: Likewise.
* gas/mips/micromips@mips32r2.d: Likewise.
* gas/mips/micromips@mips4-branch-likely.d: Likewise.
* gas/mips/micromips@mips4-fp.d: Likewise.
* gas/mips/micromips@mips4.d: Likewise.
* gas/mips/micromips@mips5.d: Likewise.
* gas/mips/micromips@mips64-cp2.d: Likewise.
* gas/mips/micromips@mips64.d: Likewise.
* gas/mips/micromips@mips64r2.d: Likewise.
* gas/mips/micromips@pref.d: Likewise.
* gas/mips/micromips@relax-at.d: Likewise.
* gas/mips/micromips@relax.d: Likewise.
* gas/mips/micromips@rol-hw.d: Likewise.
* gas/mips/micromips@uld2-eb.d: Likewise.
* gas/mips/micromips@uld2-el.d: Likewise.
* gas/mips/micromips@ulh2-eb.d: Likewise.
* gas/mips/micromips@ulh2-el.d: Likewise.
* gas/mips/micromips@ulw2-eb-ilocks.d: Likewise.
* gas/mips/micromips@ulw2-el-ilocks.d: Likewise.
* gas/mips/cache.d: Likewise.
* gas/mips/daddi.d: Likewise.
* gas/mips/mips32-imm.d: Likewise.
* gas/mips/pref.d: Likewise.
* gas/mips/elf-rel27.d: Handle microMIPS ASE.
* gas/mips/l_d.d: Likewise.
* gas/mips/l_d-n32.d: Likewise.
* gas/mips/l_d-n64.d: Likewise.
* gas/mips/ld.d: Likewise.
* gas/mips/ld-n32.d: Likewise.
* gas/mips/ld-n64.d: Likewise.
* gas/mips/s_d.d: Likewise.
* gas/mips/s_d-n32.d: Likewise.
* gas/mips/s_d-n64.d: Likewise.
* gas/mips/sd.d: Likewise.
* gas/mips/sd-n32.d: Likewise.
* gas/mips/sd-n64.d: Likewise.
* gas/mips/mips32.d: Update immediates.
* gas/mips/micromips@mips32-cp2.s: New test source.
* gas/mips/micromips@mips32-imm.s: Likewise.
* gas/mips/micromips@mips32r2-cp2.s: Likewise.
* gas/mips/micromips@mips64-cp2.s: Likewise.
* gas/mips/cache.s: Likewise.
* gas/mips/daddi.s: Likewise.
* gas/mips/mips32-imm.s: Likewise.
* gas/mips/elf-rel4.s: Handle microMIPS ASE.
* gas/mips/lb-pic.s: Likewise.
* gas/mips/ld.s: Likewise.
* gas/mips/mips32.s: Likewise.
* gas/mips/mips.exp: Add the micromips arch. Exclude mips16e
from micromips. Run mips32-imm.
* gas/mips/jal-mask-11.d: New test.
* gas/mips/jal-mask-12.d: Likewise.
* gas/mips/micromips@jal-mask-11.d: Likewise.
* gas/mips/jal-mask-1.s: Source for the new tests.
* gas/mips/jal-mask-21.d: New test.
* gas/mips/jal-mask-22.d: Likewise.
* gas/mips/micromips@jal-mask-12.d: Likewise.
* gas/mips/jal-mask-2.s: Source for the new tests.
* gas/mips/mips.exp: Run the new tests.
* gas/mips/mips16-e.d: Add --special-syms to `objdump'.
* gas/mips/tmips16-e.d: Likewise.
* gas/mips/mipsel16-e.d: Likewise.
* gas/mips/tmipsel16-e.d: Likewise.
* gas/mips/and.s: Adjust padding.
* gas/mips/beq.s: Likewise.
* gas/mips/bge.s: Likewise.
* gas/mips/bgeu.s: Likewise.
* gas/mips/blt.s: Likewise.
* gas/mips/bltu.s: Likewise.
* gas/mips/branch-misc-2.s: Likewise.
* gas/mips/jal.s: Likewise.
* gas/mips/li.s: Likewise.
* gas/mips/mips4.s: Likewise.
* gas/mips/mips4-fp.s: Likewise.
* gas/mips/relax.s: Likewise.
* gas/mips/and.d: Update accordingly.
* gas/mips/elf-jal.d: Likewise.
* gas/mips/jal.d: Likewise.
* gas/mips/li.d: Likewise.
* gas/mips/relax-at.d: Likewise.
* gas/mips/relax.d: Likewise.
include/elf/
2011-02-25 Chao-ying Fu <fu@mips.com>
Maciej W. Rozycki <macro@codesourcery.com>
* mips.h (R_MICROMIPS_min): New relocations.
(R_MICROMIPS_26_S1): Likewise.
(R_MICROMIPS_HI16, R_MICROMIPS_LO16): Likewise.
(R_MICROMIPS_GPREL16, R_MICROMIPS_LITERAL): Likewise.
(R_MICROMIPS_GOT16, R_MICROMIPS_PC7_S1): Likewise.
(R_MICROMIPS_PC10_S1, R_MICROMIPS_PC16_S1): Likewise.
(R_MICROMIPS_CALL16, R_MICROMIPS_GOT_DISP): Likewise.
(R_MICROMIPS_GOT_PAGE, R_MICROMIPS_GOT_OFST): Likewise.
(R_MICROMIPS_GOT_HI16, R_MICROMIPS_GOT_LO16): Likewise.
(R_MICROMIPS_SUB, R_MICROMIPS_HIGHER): Likewise.
(R_MICROMIPS_HIGHEST, R_MICROMIPS_CALL_HI16): Likewise.
(R_MICROMIPS_CALL_LO16, R_MICROMIPS_SCN_DISP): Likewise.
(R_MICROMIPS_JALR, R_MICROMIPS_HI0_LO16): Likewise.
(R_MICROMIPS_TLS_GD, R_MICROMIPS_TLS_LDM): Likewise.
(R_MICROMIPS_TLS_DTPREL_HI, R_MICROMIPS_TLS_DTPREL_LO): Likewise.
(R_MICROMIPS_TLS_GOTTPREL): Likewise.
(R_MICROMIPS_TLS_TPREL_HI16): Likewise.
(R_MICROMIPS_TLS_TPREL_LO16): Likewise.
(R_MICROMIPS_GPREL7_S2, R_MICROMIPS_PC23_S2): Likewise.
(R_MICROMIPS_max): Likewise.
(EF_MIPS_ARCH_ASE_MICROMIPS): New macro.
(STO_MIPS_ISA, STO_MIPS_FLAGS): Likewise.
(ELF_ST_IS_MIPS_PLT, ELF_ST_SET_MIPS_PLT): Likewise.
(STO_MICROMIPS): Likewise.
(ELF_ST_IS_MICROMIPS, ELF_ST_SET_MICROMIPS): Likewise.
(ELF_ST_IS_COMPRESSED): Likewise.
(STO_MIPS_PLT, STO_MIPS_PIC): Rework.
(ELF_ST_IS_MIPS_PIC, ELF_ST_SET_MIPS_PIC): Likewise.
(STO_MIPS16, ELF_ST_IS_MIPS16, ELF_ST_SET_MIPS16): Likewise.
include/opcode/
2011-02-25 Chao-ying Fu <fu@mips.com>
Maciej W. Rozycki <macro@codesourcery.com>
* mips.h (OP_MASK_EXTLSB, OP_SH_EXTLSB): New macros.
(OP_MASK_STYPE, OP_SH_STYPE): Likewise.
(OP_MASK_CODE10, OP_SH_CODE10): Likewise.
(OP_MASK_TRAP, OP_SH_TRAP): Likewise.
(OP_MASK_OFFSET12, OP_SH_OFFSET12): Likewise.
(OP_MASK_OFFSET10, OP_SH_OFFSET10): Likewise.
(OP_MASK_RS3, OP_SH_RS3): Likewise.
(OP_MASK_MB, OP_SH_MB, OP_MASK_MC, OP_SH_MC): Likewise.
(OP_MASK_MD, OP_SH_MD, OP_MASK_ME, OP_SH_ME): Likewise.
(OP_MASK_MF, OP_SH_MF, OP_MASK_MG, OP_SH_MG): Likewise.
(OP_MASK_MJ, OP_SH_MJ, OP_MASK_ML, OP_SH_ML): Likewise.
(OP_MASK_MP, OP_SH_MP, OP_MASK_MQ, OP_SH_MQ): Likewise.
(OP_MASK_IMMA, OP_SH_IMMA, OP_MASK_IMMB, OP_SH_IMMB): Likewise.
(OP_MASK_IMMC, OP_SH_IMMC, OP_MASK_IMMF, OP_SH_IMMF): Likewise.
(OP_MASK_IMMG, OP_SH_IMMG, OP_MASK_IMMH, OP_SH_IMMH): Likewise.
(OP_MASK_IMMI, OP_SH_IMMI, OP_MASK_IMMJ, OP_SH_IMMJ): Likewise.
(OP_MASK_IMML, OP_SH_IMML, OP_MASK_IMMM, OP_SH_IMMM): Likewise.
(OP_MASK_IMMN, OP_SH_IMMN, OP_MASK_IMMO, OP_SH_IMMO): Likewise.
(OP_MASK_IMMP, OP_SH_IMMP, OP_MASK_IMMQ, OP_SH_IMMQ): Likewise.
(OP_MASK_IMMU, OP_SH_IMMU, OP_MASK_IMMW, OP_SH_IMMW): Likewise.
(OP_MASK_IMMX, OP_SH_IMMX, OP_MASK_IMMY, OP_SH_IMMY): Likewise.
(INSN_WRITE_GPR_S): New macro.
(INSN2_BRANCH_DELAY_16BIT, INSN2_BRANCH_DELAY_32BIT): Likewise.
(INSN2_READ_FPR_D): Likewise.
(INSN2_MOD_GPR_MB, INSN2_MOD_GPR_MC): Likewise.
(INSN2_MOD_GPR_MD, INSN2_MOD_GPR_ME): Likewise.
(INSN2_MOD_GPR_MF, INSN2_MOD_GPR_MG): Likewise.
(INSN2_MOD_GPR_MJ, INSN2_MOD_GPR_MP): Likewise.
(INSN2_MOD_GPR_MQ, INSN2_MOD_SP): Likewise.
(INSN2_READ_GPR_31, INSN2_READ_GP, INSN2_READ_PC): Likewise.
(INSN2_UNCOND_BRANCH, INSN2_COND_BRANCH): Likewise.
(INSN2_MOD_GPR_MHI, INSN2_MOD_GPR_MM, INSN2_MOD_GPR_MN): Likewise.
(CPU_MICROMIPS): New macro.
(M_BC1FL, M_BC1TL, M_BC2FL, M_BC2TL): New enum values.
(M_BEQL, M_BGEZ, M_BGEZL, M_BGEZALL, M_BGTZ, M_BGTZL): Likewise.
(M_BLEZ, M_BLEZL, M_BLTZ, M_BLTZL, M_BLTZALL, M_BNEL): Likewise.
(M_CACHE_OB, M_JALS_1, M_JALS_2, M_JALS_A): Likewise.
(M_LDC2_OB, M_LDL_OB, M_LDM_AB, M_LDM_OB): Likewise.
(M_LDP_AB, M_LDP_OB, M_LDR_OB, M_LL_OB, M_LLD_OB): Likewise.
(M_LWC2_OB, M_LWL_OB, M_LWM_AB, M_LWM_OB): Likewise.
(M_LWP_AB, M_LWP_OB, M_LWR_OB): Likewise.
(M_LWU_OB, M_PREF_OB, M_SC_OB, M_SCD_OB): Likewise.
(M_SDC2_OB, M_SDL_OB, M_SDM_AB, M_SDM_OB): Likewise.
(M_SDP_AB, M_SDP_OB, M_SDR_OB): Likewise.
(M_SWC2_OB, M_SWL_OB, M_SWM_AB, M_SWM_OB): Likewise.
(M_SWP_AB, M_SWP_OB, M_SWR_OB): Likewise.
(MICROMIPSOP_MASK_MAJOR, MICROMIPSOP_SH_MAJOR): New macros.
(MICROMIPSOP_MASK_IMMEDIATE, MICROMIPSOP_SH_IMMEDIATE): Likewise.
(MICROMIPSOP_MASK_DELTA, MICROMIPSOP_SH_DELTA): Likewise.
(MICROMIPSOP_MASK_CODE10, MICROMIPSOP_SH_CODE10): Likewise.
(MICROMIPSOP_MASK_TRAP, MICROMIPSOP_SH_TRAP): Likewise.
(MICROMIPSOP_MASK_SHAMT, MICROMIPSOP_SH_SHAMT): Likewise.
(MICROMIPSOP_MASK_TARGET, MICROMIPSOP_SH_TARGET): Likewise.
(MICROMIPSOP_MASK_EXTLSB, MICROMIPSOP_SH_EXTLSB): Likewise.
(MICROMIPSOP_MASK_EXTMSBD, MICROMIPSOP_SH_EXTMSBD): Likewise.
(MICROMIPSOP_MASK_INSMSB, MICROMIPSOP_SH_INSMSB): Likewise.
(MICROMIPSOP_MASK_CODE, MICROMIPSOP_SH_CODE): Likewise.
(MICROMIPSOP_MASK_CODE2, MICROMIPSOP_SH_CODE2): Likewise.
(MICROMIPSOP_MASK_CACHE, MICROMIPSOP_SH_CACHE): Likewise.
(MICROMIPSOP_MASK_SEL, MICROMIPSOP_SH_SEL): Likewise.
(MICROMIPSOP_MASK_OFFSET12, MICROMIPSOP_SH_OFFSET12): Likewise.
(MICROMIPSOP_MASK_3BITPOS, MICROMIPSOP_SH_3BITPOS): Likewise.
(MICROMIPSOP_MASK_STYPE, MICROMIPSOP_SH_STYPE): Likewise.
(MICROMIPSOP_MASK_OFFSET10, MICROMIPSOP_SH_OFFSET10): Likewise.
(MICROMIPSOP_MASK_RS, MICROMIPSOP_SH_RS): Likewise.
(MICROMIPSOP_MASK_RT, MICROMIPSOP_SH_RT): Likewise.
(MICROMIPSOP_MASK_RD, MICROMIPSOP_SH_RD): Likewise.
(MICROMIPSOP_MASK_FS, MICROMIPSOP_SH_FS): Likewise.
(MICROMIPSOP_MASK_FT, MICROMIPSOP_SH_FT): Likewise.
(MICROMIPSOP_MASK_FD, MICROMIPSOP_SH_FD): Likewise.
(MICROMIPSOP_MASK_FR, MICROMIPSOP_SH_FR): Likewise.
(MICROMIPSOP_MASK_RS3, MICROMIPSOP_SH_RS3): Likewise.
(MICROMIPSOP_MASK_PREFX, MICROMIPSOP_SH_PREFX): Likewise.
(MICROMIPSOP_MASK_BCC, MICROMIPSOP_SH_BCC): Likewise.
(MICROMIPSOP_MASK_CCC, MICROMIPSOP_SH_CCC): Likewise.
(MICROMIPSOP_MASK_COPZ, MICROMIPSOP_SH_COPZ): Likewise.
(MICROMIPSOP_MASK_MB, MICROMIPSOP_SH_MB): Likewise.
(MICROMIPSOP_MASK_MC, MICROMIPSOP_SH_MC): Likewise.
(MICROMIPSOP_MASK_MD, MICROMIPSOP_SH_MD): Likewise.
(MICROMIPSOP_MASK_ME, MICROMIPSOP_SH_ME): Likewise.
(MICROMIPSOP_MASK_MF, MICROMIPSOP_SH_MF): Likewise.
(MICROMIPSOP_MASK_MG, MICROMIPSOP_SH_MG): Likewise.
(MICROMIPSOP_MASK_MH, MICROMIPSOP_SH_MH): Likewise.
(MICROMIPSOP_MASK_MI, MICROMIPSOP_SH_MI): Likewise.
(MICROMIPSOP_MASK_MJ, MICROMIPSOP_SH_MJ): Likewise.
(MICROMIPSOP_MASK_ML, MICROMIPSOP_SH_ML): Likewise.
(MICROMIPSOP_MASK_MM, MICROMIPSOP_SH_MM): Likewise.
(MICROMIPSOP_MASK_MN, MICROMIPSOP_SH_MN): Likewise.
(MICROMIPSOP_MASK_MP, MICROMIPSOP_SH_MP): Likewise.
(MICROMIPSOP_MASK_MQ, MICROMIPSOP_SH_MQ): Likewise.
(MICROMIPSOP_MASK_IMMA, MICROMIPSOP_SH_IMMA): Likewise.
(MICROMIPSOP_MASK_IMMB, MICROMIPSOP_SH_IMMB): Likewise.
(MICROMIPSOP_MASK_IMMC, MICROMIPSOP_SH_IMMC): Likewise.
(MICROMIPSOP_MASK_IMMD, MICROMIPSOP_SH_IMMD): Likewise.
(MICROMIPSOP_MASK_IMME, MICROMIPSOP_SH_IMME): Likewise.
(MICROMIPSOP_MASK_IMMF, MICROMIPSOP_SH_IMMF): Likewise.
(MICROMIPSOP_MASK_IMMG, MICROMIPSOP_SH_IMMG): Likewise.
(MICROMIPSOP_MASK_IMMH, MICROMIPSOP_SH_IMMH): Likewise.
(MICROMIPSOP_MASK_IMMI, MICROMIPSOP_SH_IMMI): Likewise.
(MICROMIPSOP_MASK_IMMJ, MICROMIPSOP_SH_IMMJ): Likewise.
(MICROMIPSOP_MASK_IMML, MICROMIPSOP_SH_IMML): Likewise.
(MICROMIPSOP_MASK_IMMM, MICROMIPSOP_SH_IMMM): Likewise.
(MICROMIPSOP_MASK_IMMN, MICROMIPSOP_SH_IMMN): Likewise.
(MICROMIPSOP_MASK_IMMO, MICROMIPSOP_SH_IMMO): Likewise.
(MICROMIPSOP_MASK_IMMP, MICROMIPSOP_SH_IMMP): Likewise.
(MICROMIPSOP_MASK_IMMQ, MICROMIPSOP_SH_IMMQ): Likewise.
(MICROMIPSOP_MASK_IMMU, MICROMIPSOP_SH_IMMU): Likewise.
(MICROMIPSOP_MASK_IMMW, MICROMIPSOP_SH_IMMW): Likewise.
(MICROMIPSOP_MASK_IMMX, MICROMIPSOP_SH_IMMX): Likewise.
(MICROMIPSOP_MASK_IMMY, MICROMIPSOP_SH_IMMY): Likewise.
(MICROMIPSOP_MASK_CODE, MICROMIPSOP_SH_CODE): Likewise.
(MICROMIPSOP_MASK_CODE2, MICROMIPSOP_SH_CODE2): Likewise.
(MICROMIPSOP_MASK_CACHE, MICROMIPSOP_SH_CACHE): Likewise.
(MICROMIPSOP_MASK_CODE20, MICROMIPSOP_SH_CODE20): Likewise.
(MICROMIPSOP_MASK_PERFREG, MICROMIPSOP_SH_PERFREG): Likewise.
(MICROMIPSOP_MASK_CODE19, MICROMIPSOP_SH_CODE19): Likewise.
(MICROMIPSOP_MASK_ALN, MICROMIPSOP_SH_ALN): Likewise.
(MICROMIPSOP_MASK_VECBYTE, MICROMIPSOP_SH_VECBYTE): Likewise.
(MICROMIPSOP_MASK_VECALIGN, MICROMIPSOP_SH_VECALIGN): Likewise.
(MICROMIPSOP_MASK_DSPACC, MICROMIPSOP_SH_DSPACC): Likewise.
(MICROMIPSOP_MASK_DSPACC_S, MICROMIPSOP_SH_DSPACC_S): Likewise.
(MICROMIPSOP_MASK_DSPSFT, MICROMIPSOP_SH_DSPSFT): Likewise.
(MICROMIPSOP_MASK_DSPSFT_7, MICROMIPSOP_SH_DSPSFT_7): Likewise.
(MICROMIPSOP_MASK_SA3, MICROMIPSOP_SH_SA3): Likewise.
(MICROMIPSOP_MASK_SA4, MICROMIPSOP_SH_SA4): Likewise.
(MICROMIPSOP_MASK_IMM8, MICROMIPSOP_SH_IMM8): Likewise.
(MICROMIPSOP_MASK_IMM10, MICROMIPSOP_SH_IMM10): Likewise.
(MICROMIPSOP_MASK_WRDSP, MICROMIPSOP_SH_WRDSP): Likewise.
(MICROMIPSOP_MASK_RDDSP, MICROMIPSOP_SH_RDDSP): Likewise.
(MICROMIPSOP_MASK_BP, MICROMIPSOP_SH_BP): Likewise.
(MICROMIPSOP_MASK_MT_U, MICROMIPSOP_SH_MT_U): Likewise.
(MICROMIPSOP_MASK_MT_H, MICROMIPSOP_SH_MT_H): Likewise.
(MICROMIPSOP_MASK_MTACC_T, MICROMIPSOP_SH_MTACC_T): Likewise.
(MICROMIPSOP_MASK_MTACC_D, MICROMIPSOP_SH_MTACC_D): Likewise.
(MICROMIPSOP_MASK_BBITIND, MICROMIPSOP_SH_BBITIND): Likewise.
(MICROMIPSOP_MASK_CINSPOS, MICROMIPSOP_SH_CINSPOS): Likewise.
(MICROMIPSOP_MASK_CINSLM1, MICROMIPSOP_SH_CINSLM1): Likewise.
(MICROMIPSOP_MASK_SEQI, MICROMIPSOP_SH_SEQI): Likewise.
(micromips_opcodes): New declaration.
(bfd_micromips_num_opcodes): Likewise.
ld/testsuite/
2011-02-25 Catherine Moore <clm@codesourcery.com>
Chao-ying Fu <fu@mips.com>
Maciej W. Rozycki <macro@codesourcery.com>
* lib/ld-lib.exp (run_dump_test): Support distinct assembler
flags for the same source named multiple times.
* ld-mips-elf/jalx-1.s: New test source.
* ld-mips-elf/jalx-1.d: New test output.
* ld-mips-elf/jalx-1.ld: New test linker script.
* ld-mips-elf/jalx-2-main.s: New test source.
* ld-mips-elf/jalx-2-ex.s: Likewise.
* ld-mips-elf/jalx-2-printf.s: Likewise.
* ld-mips-elf/jalx-2.dd: New test output.
* ld-mips-elf/jalx-2.ld: New test linker script.
* ld-mips-elf/mips16-and-micromips.d: New test.
* ld-mips-elf/mips-elf.exp: Run the new tests
opcodes/
2011-02-25 Chao-ying Fu <fu@mips.com>
Maciej W. Rozycki <macro@codesourcery.com>
* micromips-opc.c: New file.
* mips-dis.c (micromips_to_32_reg_b_map): New array.
(micromips_to_32_reg_c_map, micromips_to_32_reg_d_map): Likewise.
(micromips_to_32_reg_e_map, micromips_to_32_reg_f_map): Likewise.
(micromips_to_32_reg_g_map, micromips_to_32_reg_l_map): Likewise.
(micromips_to_32_reg_q_map): Likewise.
(micromips_imm_b_map, micromips_imm_c_map): Likewise.
(micromips_ase): New variable.
(is_micromips): New function.
(set_default_mips_dis_options): Handle microMIPS ASE.
(print_insn_micromips): New function.
(is_compressed_mode_p): Likewise.
(_print_insn_mips): Handle microMIPS instructions.
* Makefile.am (CFILES): Add micromips-opc.c.
* configure.in (bfd_mips_arch): Add micromips-opc.lo.
* Makefile.in: Regenerate.
* configure: Regenerate.
* mips-dis.c (micromips_to_32_reg_h_map): New variable.
(micromips_to_32_reg_i_map): Likewise.
(micromips_to_32_reg_m_map): Likewise.
(micromips_to_32_reg_n_map): New macro.
2011-07-24 14:20:15 +00:00
7a9068fe16
Add initial Intel K1OM support.
...
bfd/
2011-07-22 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.am (ALL_MACHINES): Add cpu-k1om.lo.
(ALL_MACHINES_CFILES): Add cpu-k1om.c.
* Makefile.in: Regenerated.
* archures.c (bfd_architecture): Add bfd_arch_k1om.
(bfd_k1om_arch): New.
(bfd_archures_list): Add &bfd_k1om_arch.
* bfd-in2.h: Regenerated.
* config.bfd (targ64_selvecs): Add bfd_elf64_k1om_vec if
bfd_elf64_x86_64_vec is supported. Add bfd_elf64_k1om_freebsd_vec
if bfd_elf64_x86_64_freebsd_vec is supported.
(targ_selvecs): Likewise.
* configure.in: Support bfd_elf64_k1om_vec and
bfd_elf64_k1om_freebsd_vec.
* configure: Regenerated.
* cpu-k1om.c: New.
* elf64-x86-64.c (elf64_k1om_elf_object_p): New.
(bfd_elf64_k1om_vec): Likewise.
(bfd_elf64_k1om_freebsd_vec): Likewise.
* targets.c (bfd_elf64_k1om_vec): New.
(bfd_elf64_k1om_freebsd_vec): Likewise.
(_bfd_target_vector): Add bfd_elf64_k1om_vec and
bfd_elf64_k1om_freebsd_vec.
binutils/
2011-07-22 H.J. Lu <hongjiu.lu@intel.com>
* dwarf.c (init_dwarf_regnames): Handle EM_K1OM.
* elfedit.c (elf_machine): Support EM_K1OM.
(elf_class): Likewise.
* readelf.c (guess_is_rela): Handle EM_K1OM.
(dump_relocations): Likewise.
(get_machine_name): Likewise.
(get_section_type_name): Likewise.
(get_elf_section_flags): Likewise.
(process_section_headers): Likewise.
(get_symbol_index_type): Likewise.
(is_32bit_abs_reloc): Likewise.
(is_32bit_pcrel_reloc): Likewise.
(is_64bit_abs_reloc): Likewise.
(is_64bit_pcrel_reloc): Likewise.
(is_none_reloc): Likewise.
* doc/binutils.texi: Mention K1OM for elfedit.
binutils/testsuite/
2011-07-22 H.J. Lu <hongjiu.lu@intel.com>
* binutils-all/elfedit.exp: Run elfedit-4.
* binutils-all/elfedit-4.d: New.
gas/
2011-07-22 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (cpu_arch): Add k1om.
(i386_align_code): Handle PROCESSOR_K1OM.
(check_cpu_arch_compatible): Check EM_K1OM.
(i386_arch): Handle Intel K1OM.
(i386_mach): Return bfd_mach_k1om for Intel K1OM.
(i386_target_format): Return ELF_TARGET_K1OM_FORMAT for Intel
K1OM.
* config/tc-i386.h (ELF_TARGET_K1OM_FORMAT): New.
(processor_type): Add PROCESSOR_K1OM.
* doc/c-i386.texi: Document k1om.
gas/testsuite/
2011-07-22 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/k1om.d: New.
* gas/i386/k1om-inval.l: Likewise.
* gas/i386/k1om-inval.s: Likewise.
* gas/i386/i386.exp: Run k1om-inval and k1om.
include/elf/
2011-07-22 H.J. Lu <hongjiu.lu@intel.com>
* common.h (EM_K1OM): New.
ld/
2011-07-22 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.am (ALL_64_EMULATIONS): Add eelf_k1om.o and
eelf_k1om_fbsd.o
(eelf_k1om.c): New.
(eelf_k1om_fbsd.c): Likewise.
* Makefile.in: Regenerated.
* configure.tgt (targ64_extra_emuls): Add elf_k1om if elf_x86_64
is supported. Add elf_k1om_fbsd if elf_x86_64_fbsd is supported.
(targ_extra_emuls): Likewise.
* emulparams/elf_k1om.sh: New.
* emulparams/elf_k1om_fbsd.sh: Likewise.
ld/testsuite/
2011-07-22 H.J. Lu <hongjiu.lu@intel.com>
* ld-x86-64/abs-k1om.d: New.
* ld-x86-64/protected2-k1om.d: Likewise.
* ld-x86-64/protected3-k1om.d: Likewise.
* ld-x86-64/x86-64.exp: Run abs-k1om, protected2-k1om and
protected3-k1om.
opcodes/
2011-07-22 H.J. Lu <hongjiu.lu@intel.com>
* configure.in: Handle bfd_k1om_arch.
* configure: Regenerated.
* disassemble.c (disassembler): Handle bfd_k1om_arch.
* i386-dis.c (print_insn): Handle bfd_mach_k1om and
bfd_mach_k1om_intel_syntax.
* i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to
~(CpuL1OM|CpuK1OM). Add CPU_K1OM_FLAGS.
(cpu_flags): Add CpuK1OM.
* i386-opc.h (CpuK1OM): New.
(i386_cpu_flags): Add cpuk1om.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
2011-07-22 20:22:38 +00:00
b76e66d3ba
PR 12983
...
* binutils/nm.c (display_file): Decompress debug sections when
printing line numbers.
2011-07-12 04:47:49 +00:00
2bb70ae0f4
ELFOSABI_GNU
...
bfd/
* elf.c (_bfd_elf_set_osabi): Use ELFOSABI_GNU name instead of
ELFOSABI_LINUX alias.
* elf32-hppa.c: Likewise.
* elf32-i370.c: Likewise.
* elf64-hppa.c: Likewise.
binutils/
* elfedit.c (osabis): Use ELFOSABI_GNU name instead of ELFOSABI_LINUX
alias and ELFOSABI_HURD. Add GNU alias.
* readelf.c (get_osabi_name, get_symbol_binding, get_symbol_type):
Likewise.
* doc/binutils.texi <elfedit>: Update accordingly.
elfcpp/
* elfcpp.h (ELFOSABI): Add ELFOSABI_GNU with value of ELFOSABI_LINUX,
keep ELFOSABI_LINUX as an alias. Remove ELFOSABI_HURD.
gas/
* config/obj-elf.c (obj_elf_type): Use ELFOSABI_GNU name instead of
ELFOSABI_LINUX alias.
* config/tc-ia64.c: Likewise.
include/elf/
* common.h (ELFOSABI_GNU): Define, replaces...
(ELFOSABI_LINUX): ... this, kept as an alias.
(ELFOSABI_HURD): Remove.
ld/testsuite/
* ld-ifunc/ifunc.exp: Update for changed output.
* ld-unique/unique.exp: Likewise.
2011-07-03 13:45:32 +00:00
9c55345c8c
ELFOSABI_GNU
...
bfd/
* elf.c (_bfd_elf_set_osabi): Use ELFOSABI_GNU name instead of
ELFOSABI_LINUX alias.
* elf32-hppa.c: Likewise.
* elf32-i370.c: Likewise.
* elf64-hppa.c: Likewise.
binutils/
* elfedit.c (osabis): Use ELFOSABI_GNU name instead of ELFOSABI_LINUX
alias and ELFOSABI_HURD. Add GNU alias.
* readelf.c (get_osabi_name, get_symbol_binding, get_symbol_type):
Likewise.
* doc/binutils.texi <elfedit>: Update accordingly.
elfcpp/
* elfcpp.h (ELFOSABI): Add ELFOSABI_GNU with value of ELFOSABI_LINUX,
keep ELFOSABI_LINUX as an alias. Remove ELFOSABI_HURD.
gas/
* config/obj-elf.c (obj_elf_type): Use ELFOSABI_GNU name instead of
ELFOSABI_LINUX alias.
* config/tc-ia64.c: Likewise.
include/elf/
* common.h (ELFOSABI_GNU): Define, replaces...
(ELFOSABI_LINUX): ... this, kept as an alias.
(ELFOSABI_HURD): Remove.
ld/testsuite/
* ld-ifunc/ifunc.exp: Update for changed output.
* ld-unique/unique.exp: Likewise.
2011-07-03 13:37:09 +00:00
8adf5d7047
PR binutils/12325
...
* doc/binutils.texi (ar cmdline): Document --target, --version and
--help command line options.
2011-07-01 15:02:21 +00:00
28902555d0
* binutils-all/objcopy.exp (strip_test, strip_executable):
...
On ELF targets, test that OS/ABI is preserved.
(copy_setup): Do test on tic6x-*-uclinux.
2011-06-30 21:41:05 +00:00
75d5a45f82
PR binutils/12558
...
* ar.c (main): When asked to move members in an archive that is
being created, ignore the move request.
2011-06-30 15:08:17 +00:00
a7dbfd1c34
* readelf.c (get_section_type_name): When displaying an unknown
...
section type display the hex value first on the assumption that
the full message will probably be truncated into a 15 character
field.
2011-06-29 16:51:37 +00:00
f8b999f945
* dwarf2.h (enum dwarf_location_atom): Add DW_OP_GNU_parameter_ref.
...
* dwarf.c (decode_location_expression): For DW_OP_GNU_convert and
DW_OP_GNU_reinterpret, if uvalue is 0, don't add cu_offset.
Handle DW_OP_GNU_parameter_ref.
2011-06-22 15:03:19 +00:00
8b7789423c
Fix misc x32 bugs.
...
bfd/
2011-06-19 H.J. Lu <hongjiu.lu@intel.com>
* elf64-x86-64.c (elf_backend_post_process_headers): Defined
for x32.
binutils/testsuite/
2011-06-19 H.J. Lu <hongjiu.lu@intel.com>
* binutils-all/elfedit-1.d: Updated for x32.
gas/
2011-06-19 H.J. Lu <hongjiu.lu@intel.com>
* configure.tgt: Support x32.
ld/
2011-06-19 H.J. Lu <hongjiu.lu@intel.com>
* configure.tgt: Support x32.
ld/testsuite/
2011-06-19 H.J. Lu <hongjiu.lu@intel.com>
* ld-elf/eh1.d: Skip x32.
* ld-elf/eh2.d: Likewise.
* ld-elf/eh3.d: Likewise.
* ld-elf/eh4.d: Likewise.
* ld-elfvsb/elfvsb.exp: Only xfail 64bit x86_64-*-linux*.
* ld-shared/shared.exp: Likewise.
* ld-ifunc/ifunc-1-local-x86.d: Support x32.
* ld-ifunc/ifunc-1-x86.d: Likewise.
* ld-ifunc/ifunc-3a-x86.d: Likewise.
* ld-x86-64/pcrel16.d: Likewise.
* ld-x86-64/x86-64.exp (x86_64tests): Add missing -melf_x86_64.
2011-06-19 21:22:16 +00:00
af61e67f31
* dwarf-mode.el (dwarf-do-insert-substructure): Call
...
expand-file-name.
(dwarf-do-refresh): Likewise.
2011-06-16 16:39:23 +00:00
faa9a424ea
include/elf/
...
* common.h (NT_ARM_VFP): Define.
bfd/
* elf-bfd.h (elfcore_write_arm_vfp): Add prototype.
* elf.c (elfcore_grok_arm_vfp): New function.
(elfcore_grok_note): Call it to handle NT_ARM_VFP notes.
(elfcore_write_arm_vfp): New function.
(elfcore_write_register_note): Call it to handle .reg-arm-vfp.
binutils/
* readelf.c (get_note_type): Handle NT_ARM_VFP.
2011-06-15 16:36:58 +00:00
aa137e4d51
* Makefile.am (ALL_MACHINES): Add cpu-tilegx.lo and cpu-tilepro.lo.
...
(ALL_MACHINE_CFILES): Add cpu-tilegx.c and cpu-tilepro.c.
(BFD32_BACKENDS): Add elf32-tilegx.lo, elf32-tilepro.lo,
and elfxx-tilegx.lo.
(BFD32_BACKENDS_CFILES): Add elf32-tilegx.c elf32-tilepro.c, and
elfxx-tilegx.c.
(BFD64_BACKENDS): Add elf64-tilegx.lo.
(BFD64_BACKENDS_CFILES): Add elf64-tilegx.c.
* Makefile.in: Regenerate.
* arctures.c (bfd_architecture): Define bfd_arch_tilepro,
bfd_arch_tilegx, bfd_mach_tilepro, bfd_mach_tilegx.
(bfd_arch_info): Add bfd_tilegx_arch, bfd_tilepro_arch.
(bfd_archures_list): Add bfd_tilegx_arch, bfd_tilepro_arch.
bfd-in2.h: Regenerate.
* config.bfd: Handle tilegx-*-* and tilepro-*-*.
* configure.in: Handle bfd_elf32_tilegx_vec, bfd_elf32_tilepro_vec,
and bfd_elf64_tilegx_vec.
* configure: Regenerate.
* elf-bfd.h (enum elf_target_id): Define TILEGX_ELF_DATA and
TILEPRO_ELF_DATA.
* libbfd.h: Regenerate.
* reloc.c: Add BFD_RELOC_TILEPRO_{COPY, GLOB_DAT, JMP_SLOT,
RELATIVE, BROFF_X1, JOFFLONG_X1, JOFFLONG_X1_PLT, IMM8_X0,
IMM8_Y0, IMM8_X1, IMM8_Y1, DEST_IMM8_X1, MT_IMM15_X1, MF_IMM15_X1,
IMM16_X0, IMM16_X1, IMM16_X0_LO, IMM16_X1_LO, IMM16_X0_HI,
IMM16_X1_HI, IMM16_X0_HA, IMM16_X1_HA, IMM16_X0_PCREL,
IMM16_X1_PCREL, IMM16_X0_LO_PCREL, IMM16_X1_LO_PCREL,
IMM16_X0_HI_PCREL, IMM16_X1_HI_PCREL, IMM16_X0_HA_PCREL,
IMM16_X1_HA_PCREL, IMM16_X0_GOT, IMM16_X1_GOT, IMM16_X0_GOT_LO,
IMM16_X1_GOT_LO, IMM16_X0_GOT_HI, IMM16_X1_GOT_HI,
IMM16_X0_GOT_HA, IMM16_X1_GOT_HA, MMSTART_X0, MMEND_X0,
MMSTART_X1, MMEND_X1, SHAMT_X0, SHAMT_X1, SHAMT_Y0, SHAMT_Y1,
IMM16_X0_TLS_GD, IMM16_X1_TLS_GD, IMM16_X0_TLS_GD_LO,
IMM16_X1_TLS_GD_LO, IMM16_X0_TLS_GD_HI, IMM16_X1_TLS_GD_HI,
IMM16_X0_TLS_GD_HA, IMM16_X1_TLS_GD_HA, IMM16_X0_TLS_IE,
IMM16_X1_TLS_IE, IMM16_X0_TLS_IE_LO, IMM16_X1_TLS_IE_LO,
IMM16_X0_TLS_IE_HI, IMM16_X1_TLS_IE_HI, IMM16_X0_TLS_IE_HA,
IMM16_X1_TLS_IE_HA, TLS_DTPMOD32, TLS_DTPOFF32, TLS_TPOFF32}
Add BFD_RELOC_TILEGX_{HW0, HW1, HW2, HW3, HW0_LAST, HW1_LAST,
HW2_LAST, COPY, GLOB_DAT, JMP_SLOT, RELATIVE, BROFF_X1,
JUMPOFF_X1, JUMPOFF_X1_PLT, IMM8_X0, IMM8_Y0, IMM8_X1, IMM8_Y1,
DEST_IMM8_X1, MT_IMM14_X1, MF_IMM14_X1, MMSTART_X0, MMEND_X0,
SHAMT_X0, SHAMT_X1, SHAMT_Y0, SHAMT_Y1, IMM16_X0_HW0,
IMM16_X1_HW0, IMM16_X0_HW1, IMM16_X1_HW1, IMM16_X0_HW2,
IMM16_X1_HW2, IMM16_X0_HW3, IMM16_X1_HW3, IMM16_X0_HW0_LAST,
IMM16_X1_HW0_LAST, IMM16_X0_HW1_LAST, IMM16_X1_HW1_LAST,
IMM16_X0_HW2_LAST, IMM16_X1_HW2_LAST, IMM16_X0_HW0_PCREL,
IMM16_X1_HW0_PCREL, IMM16_X0_HW1_PCREL, IMM16_X1_HW1_PCREL,
IMM16_X0_HW2_PCREL, IMM16_X1_HW2_PCREL, IMM16_X0_HW3_PCREL,
IMM16_X1_HW3_PCREL, IMM16_X0_HW0_LAST_PCREL,
IMM16_X1_HW0_LAST_PCREL, IMM16_X0_HW1_LAST_PCREL,
IMM16_X1_HW1_LAST_PCREL, IMM16_X0_HW2_LAST_PCREL,
IMM16_X1_HW2_LAST_PCREL, IMM16_X0_HW0_GOT, IMM16_X1_HW0_GOT,
IMM16_X0_HW1_GOT, IMM16_X1_HW1_GOT, IMM16_X0_HW2_GOT,
IMM16_X1_HW2_GOT, IMM16_X0_HW3_GOT, IMM16_X1_HW3_GOT,
IMM16_X0_HW0_LAST_GOT, IMM16_X1_HW0_LAST_GOT,
IMM16_X0_HW1_LAST_GOT, IMM16_X1_HW1_LAST_GOT,
IMM16_X0_HW2_LAST_GOT, IMM16_X1_HW2_LAST_GOT, IMM16_X0_HW0_TLS_GD,
IMM16_X1_HW0_TLS_GD, IMM16_X0_HW1_TLS_GD, IMM16_X1_HW1_TLS_GD,
IMM16_X0_HW2_TLS_GD, IMM16_X1_HW2_TLS_GD, IMM16_X0_HW3_TLS_GD,
IMM16_X1_HW3_TLS_GD, IMM16_X0_HW0_LAST_TLS_GD,
IMM16_X1_HW0_LAST_TLS_GD, IMM16_X0_HW1_LAST_TLS_GD,
IMM16_X1_HW1_LAST_TLS_GD, IMM16_X0_HW2_LAST_TLS_GD,
IMM16_X1_HW2_LAST_TLS_GD, IMM16_X0_HW0_TLS_IE,
IMM16_X1_HW0_TLS_IE, IMM16_X0_HW1_TLS_IE, IMM16_X1_HW1_TLS_IE,
IMM16_X0_HW2_TLS_IE, IMM16_X1_HW2_TLS_IE, IMM16_X0_HW3_TLS_IE,
IMM16_X1_HW3_TLS_IE, IMM16_X0_HW0_LAST_TLS_IE,
IMM16_X1_HW0_LAST_TLS_IE, IMM16_X0_HW1_LAST_TLS_IE,
IMM16_X1_HW1_LAST_TLS_IE, IMM16_X0_HW2_LAST_TLS_IE,
IMM16_X1_HW2_LAST_TLS_IE, TLS_DTPMOD64, TLS_DTPOFF64, TLS_TPOFF64,
TLS_DTPMOD32, TLS_DTPOFF32, TLS_TPOFF32}
* targets.c (bfd_elf32_tilegx_vec): Declare.
(bfd_elf32_tilepro_vec): Declare.
(bfd_elf64_tilegx_vec): Declare.
(bfd_target_vector): Add bfd_elf32_tilegx_vec, bfd_elf32_tilepro_vec,
and bfd_elf64_tilegx_vec.
* cpu-tilegx.c: New file.
* cpu-tilepro.c: New file.
* elf32-tilepro.h: New file.
* elf32-tilepro.c: New file.
* elf32-tilegx.c: New file.
* elf32-tilegx.h: New file.
* elf64-tilegx.c: New file.
* elf64-tilegx.h: New file.
* elfxx-tilegx.c: New file.
* elfxx-tilegx.h: New file.
* Makefile.am (TARGET_CPU_CFILES): Add config/tc-tilegx.c and
config/tc-tilepro.c.
(TARGET_CPU_HFILES): Add config/tc-tilegx.h and
config/tc-tilepro.h.
* Makefile.in: Regenerate.
* configure.tgt (tilepro-*-*): New.
(tilegx-*-*): Likewise.
* config/tc-tilegx.c: New file.
* config/tc-tilegx.h: Likewise.
* config/tc-tilepro.h: Likewise.
* config/tc-tilepro.c: Likewise.
* doc/Makefile.am (CPU_DOCS): Add c-tilegx.texi and
c-tilepro.texi.
* doc/Makefile.in: Regenerate.
* doc/all.texi (TILEGX): Define.
(TILEPRO): Define.
* doc/as.texinfo: Add Tile-Gx and TILEPro documentation. Include
c-tilegx.texi and c-tilepro.texi.
* doc/c-tilegx.texi: New.
* doc/c-tilepro.texi: New.
* gas/tilepro/t_constants.s: New file.
* gas/tilepro/t_constants.d: Likewise.
* gas/tilepro/t_insns.s: Likewise.
* gas/tilepro/tilepro.exp: Likewise.
* gas/tilepro/t_insns.d: Likewise.
* gas/tilegx/tilegx.exp: Likewise.
* gas/tilegx/t_insns.d: Likewise.
* gas/tilegx/t_insns.s: Likewise.
* dis-asm.h (print_insn_tilegx): Declare.
(print_insn_tilepro): Likewise.
* tilegx.h: New file.
* tilepro.h: New file.
* common.h: Add EM_TILEGX.
* tilegx.h: New file.
* tilepro.h: New file.
* Makefile.am (ALL_EMULATION_SOURCES): Add eelf32tilegx.c and
eelf32tilepro.c.
(ALL_64_EMULATION_SOURCES): Add eelf64tilegx.c.
(eelf32tilegx.c): New target.
(eelf32tilepro.c): Likewise.
(eelf64tilegx.c): Likewise.
* Makefile.in: Regenerate.
* configure.tgt: Handle tilegx-*-* and tilepro-*-*.
* emulparams/elf32tilegx.sh: New file.
* emulparams/elf64tilegx.sh: New file.
* emulparams/elf32tilepro.sh: New file.
* ld-elf/eh5.d: Don't run on tile*.
* ld-srec/srec.exp: xfail on tile*.
* ld-tilegx/external.s: New file.
* ld-tilegx/reloc.d: New file.
* ld-tilegx/reloc.s: New file.
* ld-tilegx/tilegx.exp: New file.
* ld-tilepro/external.s: New file.
* ld-tilepro/reloc.d: New file.
* ld-tilepro/reloc.s: New file.
* ld-tilepro/tilepro.exp: New file.
* Makefile.am (TARGET_LIBOPCODES_CFILES): Add tilegx-dis.c,
tilegx-opc.c, tilepro-dis.c, and tilepro-opc.c.
* Makefile.in: Regenerate.
* configure.in: Handle bfd_tilegx_arch and bfd_tilepro_arch.
* configure: Regenerate.
* disassemble.c (disassembler): Add ARCH_tilegx and ARCH_tilepro.
* po/POTFILES.in: Regenerate.
* tilegx-dis.c: New file.
* tilegx-opc.c: New file.
* tilepro-dis.c: New file.
* tilepro-opc.c: New file.
2011-06-13 15:18:54 +00:00
e682d13b0a
2011-06-09 Tristan Gingold <gingold@adacore.com>
...
* od-xcoff.c (xcoff32_read_symbols): Allow missing string table
length.
2011-06-09 15:29:05 +00:00
592458412f
PR binutils/12855
...
* readelf.c (process_version_sections): Handle binaries containing
corrupt version information.
(process_symbol_table): Stop processing a symbol's version
information if it could not be read in.
(get_data): Add comment describing the function.
(process_section_headers): Set dynamic_strings_length to 0 if the
dynamic strings could not be read in.
(process_dynamic_section): Likewise.
(process_section_groups): Stop processing the group information if
the data could not be read in.
(hppa_processs_unwind): Assert that there is only one string table
in the file.
(arm_process_unwind): Likewise.
(ia64_process_unwind): Likewise.
Set the size of the unwind auxillary information to 0 if the data
could not be read.
(load_specific_debug_section): Handle a failure to read in the
section.
(process_mips_specific): Stop display of the PLT GOT section if it
could not be read in.
2011-06-08 15:59:07 +00:00
516ec24de2
2011-06-08 Tristan Gingold <gingold@adacore.com>
...
* makefile.vms (DEFS): Define OBJDUMP_PRIVATE_VECTORS.
2011-06-08 12:40:28 +00:00
ad6b52dd0b
* dwarf.c: Fix conversion to TU number.
2011-06-07 23:39:28 +00:00
cc643b88f1
Fix spelling mistakes.
2011-06-02 13:43:24 +00:00
9483a6ee46
* MAINTAINERS: Update my email address.
2011-06-01 11:08:25 +00:00
1ab52cbe05
PR binutils/12820
...
* configure.in (BUILD_INSTALL_MISC): Only add embedspu once.
* configure: Regenerate.
2011-05-31 08:54:47 +00:00
1c10be1e7a
PR binutils/12820
...
* Makefile.am (bin_PROGRAMS): Move BUILD_INSTALL_MISC to..
(bin_SCRIPTS): ..here.
(EXTRA_SCRIPTS): Define.
(EXTRA_DIST): Add embedspu.sh.
(DISTCLEANFILES): Add embedspu.
(embedspu): Depend on Makefile. Replace sed "s" command with "c".
* Makefile.in: Regenerate.
2011-05-30 06:12:03 +00:00
51d0d03fd3
* dwarf.c (loc_offsets): New variable.
...
(loc_offsets_compar): New routine.
(display_debug_loc): Handle loc_offsets not being in ascending order
and also a single .debug_loc entry being used multiple times.
2011-05-25 15:10:56 +00:00
0ba0c2b343
PR binutils/12753
...
* nm.c (filter_symbols): Treat unique symbols as global symbols.
* doc/binutils.texi (nm): Mention that some lowercase letters
actually indicate global symbols.
* lib/utils-lib.exp (run_dump_test): Allow nm as a program.
* binutils-all/nm.exp: Test running "nm -g" on an object file
containing a unique symbol.
2011-05-18 16:35:03 +00:00
429628a55b
Missing entry.
...
2011-05-15 Tristan Gingold <gingold@adacore.com>
* od-xcoff.c: New file.
* objdump.h: New file.
* objdump.c: Include objdump.h
(dump_private_options, objdump_private_vectors): New variables.
(usage): Mention -P/--private. Display handled options.
(long_options): Add -P/--private.
(dump_target_specific): New function.
(dump_bfd): Handle dump_private_options.
(main): Handle -P.
* doc/binutils.texi (objdump): Document -P/--private.
* configure.in (OBJDUMP_PRIVATE_VECTORS, OBJDUMP_PRIVATE_OFILES):
New variables, compute them.
(od_vectors): Add vectors for private dumpers. Make them uniq.
(OBJDUMP_DEFS): Add OBJDUMP_PRIVATE_VECTORS.
* Makefile.am (HFILES): Add objdump.h
(CFILES): Add od-xcoff.c
(OBJDUMP_PRIVATE_OFILES): New variable.
(objdump_DEPENDENCIES): Append OBJDUMP_PRIVATE_OFILES.
(objdump_LDADD): Ditto.
(EXTRA_objdump_SOURCES): Define.
* Makefile.in: Regenerate.
* configure: Regenerate.
2011-05-16 13:45:42 +00:00
6abcee9042
2011-05-16 Tristan Gingold <gingold@adacore.com>
...
* od-xcoff.c: New file.
* objdump.h: New file.
* objdump.c: Include objdump.h
(dump_private_options, objdump_private_vectors): New variables.
(usage): Mention -P/--private. Display handled options.
(long_options): Add -P/--private.
(dump_target_specific): New function.
(dump_bfd): Handle dump_private_options.
(main): Handle -P.
* doc/binutils.texi (objdump): Document -P/--private.
* configure.in (OBJDUMP_PRIVATE_VECTORS, OBJDUMP_PRIVATE_OFILES):
New variables, compute them.
(od_vectors): Add vectors for private dumpers. Make them uniq.
(OBJDUMP_DEFS): Add OBJDUMP_PRIVATE_VECTORS.
* Makefile.am (HFILES): Add objdump.h
(CFILES): Add od-xcoff.c
(OBJDUMP_PRIVATE_OFILES): New variable.
(objdump_DEPENDENCIES): Append OBJDUMP_PRIVATE_OFILES.
(objdump_LDADD): Ditto.
(EXTRA_objdump_SOURCES): Define.
* Makefile.in: Regenerate.
* configure: Regenerate.
2011-05-16 12:22:13 +00:00
b0a0c50aa8
* binutils-all/objcopy.exp objcopy_text): Remove xfails for sh-rtems
...
and tic4x.
2011-05-13 04:14:51 +00:00
7e665af3af
2011-05-10 Tristan Gingold <gingold@adacore.com>
...
* dwarf.c (process_extended_line_op): Dump unknown records.
2011-05-10 09:08:37 +00:00
44bbc88ae6
Mention PR binutils/12632 in ChangeLog.
2011-05-08 14:43:19 +00:00
19094d10cd
* objcopy.c (copy_archive): Check bfd_openw result in unknown object
...
case. Rewrite without goto.
2011-05-06 14:41:56 +00:00
0892011df2
* dwarf.c (decode_location_expression): Handle DW_OP_GNU_const_type,
...
DW_OP_GNU_regval_type, DW_OP_GNU_deref_type, DW_OP_GNU_convert
and DW_OP_GNU_reinterpret.
2011-05-03 08:43:14 +00:00
1cd48f989a
* MAINTAINERS: Add myself as DWARF2 maintainer.
2011-05-03 08:33:42 +00:00
fde6f1fc67
Add testcases for "ar -d" and "ar -m".
...
2011-05-02 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/12720
* binutils-all/ar.exp (delete_an_element): New.
(move_an_element): Likewise.
Run delete_an_element and move_an_element.
2011-05-02 12:47:47 +00:00
4510857d06
PR binutils/12720
...
Revert the following change
Michael Snyder <msnyder@vmware.com>
* ar.c (move_members): Plug memory leak.
(delete_members): Plug memory leak.
2011-05-02 06:04:11 +00:00
e17de01501
Update binutils-all/x86-64/compressed-1a.d.
...
2011-04-30 H.J. Lu <hongjiu.lu@intel.com>
* binutils-all/x86-64/compressed-1a.d: Adjust for change in output
format.
2011-04-30 13:17:19 +00:00
b15d6aa360
* binutils-all/i386/compressed-1a.d: Adjust for change in output
...
format.
2011-04-29 01:45:51 +00:00
fd2f003344
* NEWS: Add note about --dwarf-depth, --dwarf-start, and
...
dwarf-mode.el.
* objdump.c (suppress_bfd_header): New global.
(usage): Update.
(OPTION_DWARF_DEPTH, OPTION_DWARF_START): New constants.
(options): Add dwarf-depth and dwarf-start entries.
(dump_bfd): Use suppress_bfd_header.
(main): Handle OPTION_DWARF_START, OPTION_DWARF_DEPTH.
* doc/binutils.texi (objcopy): Document --dwarf-depth and
--dwarf-start.
(readelf): Likewise.
* dwarf-mode.el: New file.
* dwarf.c (dwarf_cutoff_level, dwarf_start_die): New globals.
(read_and_display_attr_value): Also check debug_info_p.
(process_debug_info): Handle dwarf_start_die and
dwarf_cutoff_level.
* dwarf.h (dwarf_cutoff_level, dwarf_start_die): Declare.
* readelf.c (usage): Update.
(OPTION_DWARF_DEPTH): New macro.
(OPTION_DWARF_START): Likewise.
(options): Add dwarf-depth and dwarf-start entries.
(parse_args): Handle OPTION_DWARF_START and OPTION_DWARF_DEPTH.
testsuite
* binutils-all/objdump.W: Correct output.
2011-04-28 17:23:17 +00:00
6adc060c88
binutils/
...
* dwarf.c (display_gdb_index): Support version 5, warn on version 4.
2011-04-28 07:27:30 +00:00
43294ab7fc
2011-04-27 Tristan Gingold <gingold@adacore.com>
...
* dwarf.c (process_extended_line_op): Handle
DW_LNE_HP_source_file_correlation.
2011-04-27 12:09:48 +00:00
b4e7b88557
Updated Danish, Esperanto and French translations.
2011-04-27 10:02:27 +00:00
c6a9fc58fd
* readelf.c (print_stapsdt_note): New function.
...
(process_note): Use it.
2011-04-26 13:17:20 +00:00
70616151ac
* readelf.c (get_stapsdt_note_type): New function.
...
(process_note): Recognize "stapsdt" notes.
2011-04-26 13:09:10 +00:00
2aee03ae36
* readelf.c (process_corefile_note_segment): Change header field
...
widths.
(process_note): Change field widths.
2011-04-26 13:07:47 +00:00
664f90a331
* readelf.c (print_gnu_note): New function.
...
(process_note): Use it.
2011-04-25 14:53:27 +00:00
4161fbb015
* MAINTAINERS: Update my email address.
2011-04-22 02:45:24 +00:00
7f880bc3d4
Adjust broken ChangeLog entry
2011-04-13 12:02:36 +00:00
ec25acb399
* windres.c (usage): Add new --preprocessor-arg option.
...
(option_values): Add new OPTION_PREPROCESSOR_ARG enumerator.
(option long_options): Add preprocessor-arg option.
(main): Handle it.
* doc/binutils.texi: Add documentation for --preprocessor-arg
option.
* NEWS: Add line about new --preprocessor-arg option for windres.
* binutils-all/windres/windres.exp: Add '// cpparg <option>' command
to rc file interpretation to specify addition pre-processor commands
as script option.
* binutils-all/windres/strtab3.rc: New.
* binutils-all/windres/strtab3.rsd: New.
* binutils-all/windres/README: Add note about cpparg script option.
argument
2011-04-13 07:50:15 +00:00
0389ec1ea0
* binutils-all/arm/simple.s: Fix assembly problems for COFF based
...
ARM toolchaisn by removing .type and .size directives.
2011-04-11 15:12:29 +00:00
894e93a83c
* arlex.l: Prevent redefinition of YY_NO_UNPUT.
...
* syslex.l: Likewise.
2011-04-08 15:28:47 +00:00
1fbaefec00
2011-04-07 Paul Carroll<pcarroll@codesourcery.com>
...
opcodes/
* arm-dis.c (print_insn): init vars moved into private_data structure.
binutils/testsuite/
* binutils-all/arm/simple.s: Demo issue with objdump with
multiple input files
* binutils-all/arm/objdump.exp: added new ARM test case code
2011-04-08 11:42:19 +00:00
fa197c1c74
2011-04-07 Paul Brook <paul@codesourcery.com>
...
binutils/
* readelf.c (arm_section_get_word): Handle C6000 relocations.
(decode_tic6x_unwind_regmask, decode_arm_unwind_bytecode,
decode_tic6x_unwind_bytecode, expand_prel31): New functions.
(decode_arm_unwind): Split out common code from ARM specific bits.
(dump_arm_unwind): Use expand_prel31.
(arm_process_unwind): Handle SHT_C6000_UNWIND sections.
(process_unwind): Add SHT_C6000_UNWIND.
2011-04-07 11:40:12 +00:00
8c5fc80011
bfd:
...
* config.bfd (thumb-*-oabi): Don't handle in list of obsolete
targets.
(strongarm*, thumb*, xscale*): Remove architectures.
(strongarm-*-kaos*, thumb-*-coff, thumb-*-elf, thumb-epoc-pe*,
thumb-*-pe*, strongarm-*-elf, strongarm-*-coff, xscale-*-elf,
xscale-*-coff): Remove targets.
binutils:
* configure.in (thumb-*-pe*): Remove.
* configure: Regenerate.
binutils/testsuite:
* binutils-all/objcopy.exp (*arm*-*-coff): Change to arm*-*-coff.
(xscale-*-coff, thumb*-*-coff, thumb*-*-pe): Don't handle.
gas:
* configure.tgt (strongarm*be, strongarm*b, strongarm*,
xscale*be|xscale*b, xscale*): Remove architectures.
(thumb-*-coff, thumb-*-rtems*, thumb-*-elf, thumb-epoc-pe,
thumb-*-pe, xscale-*-coff, xscale-*-elf): Remove targets.
gas/testsuite:
* gas/all/gas.exp (*arm*-*-coff): Change to arm*-*-coff.
(thumb*-*-coff, thumb*-*-pe*): Don;t handle.
* gas/arm/arm.exp (*arm*-*-*): Change to arm*-*-*.
(*xscale*-*-*): Don't handle.
* gas/cfi/cfi.exp (xscale*-*): Don't handle.
* gas/elf/elf.exp (*arm*-*-*): Change to arm*-*-*.
(xscale*-*-*): Don't handle.
ld:
* configure.tgt (thumb-*-linux-* | thumb-*-uclinux*,
strongarm-*-coff, strongarm-*-elf, strongarm-*-kaos*,
thumb-*-coff, thumb-*-elf, thumb-epoc-pe, thumb-*-pe,
xscale-*-coff, xscale-*-elf): Remove targets.
ld/testsuite:
* ld-selective/selective.exp (xscale-*-*): Don't handle.
* ld-srec/srec.exp (strongarm*-*-*, xscale*-*-*, thumb-*-*): Don't
handle.
(*arm*-*-*): Change to arm*-*-*.
(strongarm*-*-coff, xscale*-*-coff, thumb-*-coff*, thumb-*-pe*,
thumb-*-elf*, strongarm*-*-*, thumb-*-*): Remove xfails.
* ld-undefined/undefined.exp (thumb*-*-pe*, thumb*-*-pe*): Remove
commented-out xfails.
(thumb-elf): Remove reference in comment.
* lib/ld-lib.exp (strongarm*-*-*, xscale*-*-*, thumb-*-*): Don't
handle.
2011-04-06 17:09:56 +00:00
a8aa951d7b
Add missing ChangeLog entry
2011-04-05 20:42:54 +00:00
8ea9e2be56
2011-04-05 Sterling Augustine <augustine.sterling@gmail.com>
...
* MAINTAINERS: Update my email address.
2011-04-05 20:39:57 +00:00
1e99536ae5
Make the unknown archive element readable.
...
2011-04-03 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/12632
* objcopy.c (copy_unknown_object): Make the archive element
readable.
2011-04-04 01:35:59 +00:00
bf03e63286
binutils/
...
* objdump.c (dump_reloc_set): Output R_SPARC_OLO10 relocations
accurately, rather than how they are represented internally.
2011-04-04 00:34:26 +00:00
545f57c6fa
bfd/
...
2011-03-31 Tristan Gingold <gingold@adacore.com>
* makefile.vms (DEFS): Add HAVE_bfd_elf64_ia64_vms_vec.
* configure.com: Set BFD_HOST_64BIT_LONG_LONG and
BFD_HOST_LONG_LONG to 1.
binutils/
2011-03-31 Tristan Gingold <gingold@adacore.com>
* makefile.vms (readelf.exe): New target.
2011-03-31 14:15:31 +00:00
083faca904
bfd/
...
2011-03-31 Tristan Gingold <gingold@adacore.com>
* vms-alpha.c (vms_get_remaining_object_record): Fix dec-c warning.
(_bfd_vms_write_etir): Ditto.
(_bfd_vms_slurp_etir): Avoid to use intptr_t
* configure.com: Generate bfd_stdint.h
binutils/
2011-03-31 Tristan Gingold <gingold@adacore.com>
* makefile.vms (DEBUG_OBJS): Add elfcomm.obj.
libiberty/
2011-03-31 Tristan Gingold <gingold@adacore.com>
* makefile.vms (OBJS): Add filename_cmp.obj
2011-03-31 11:08:41 +00:00
ac14530735
include/elf/
...
* tic6x.h (R_C6000_JUMP_SPLOT, R_C6000_EHTYPE,
R_C6000_PCR_H16, R_C6000_PCR_L16): New relocs.
(SHN_TIC6X_SCOMMON): Define.
bfd/
* elf32-tic6x.h (struct elf32_tic6x_params): New.
(elf32_tic6x_setup): Declare.
* elf32-tic6x.c: Include <limits.h>.
(ELF_DYNAMIC_LINKER, DEFAULT_STACK_SIZE, PLT_ENTRY_SIZE): Define.
(struct elf32_tic6x_link_hash_table, struct elf32_link_hash_entry):
New structures.
(elf32_tic6x_link_hash_table, is_tic6x_elf): New macros.
(tic6x_elf_scom_section, tic6x_elf_scom_symbol,
tic6x_elf_scom_symbol_ptr): New static variables.
(elf32_tic6x_howto_table, elf32_tic6x_howto_table_rel,
elf32_tic6x_reloc_map): Add R_C6000_JUMP_SLOT, R_C6000_EHTYPE,
R_C6000_PCR_H16 and R_C6000_PCR_L16.
(elf32_tic6x_link_hash_newfunc, elf32_tic6x_link_hash_table_create,
elf32_tic6x_link_hash_table_free, elf32_tic6x_setup,
elf32_tic6x_using_dsbt, elf32_tic6x_install_rela,
elf32_tic6x_create_dynamic_sections, elf32_tic6x_make_got_dynreloc,
elf32_tic6x_finish_dynamic_symbol, elf32_tic6x_gc_sweep_hook,
elf32_tic6x_adjust_dynamic_symbol): New static functions.
(elf32_tic6x_relocate_section): For R_C6000_PCR_S21, convert branches
to weak symbols as required by the ABI.
Handle GOT and DSBT_INDEX relocs, and copy relocs to the output file
as needed when generating DSBT output.
(elf32_tic6x_check_relocs, elf32_tic6x_add_symbol_hook,
elf32_tic6x_symbol_processing, elf32_tic6x_section_from_bfd_section,
elf32_tic6x_allocate_dynrelocs, elf32_tic6x_size_dynamic_sections,
elf32_tic6x_always_size_sections, elf32_tic6x_modify_program_headers,
elf32_tic6x_finish_dynamic_sections, elf32_tic6x_plt_sym_val,
elf32_tic6x_copy_private_data, elf32_tic6x_link_omit_section_dynsym):
New static functions.
(ELF_MAXPAGESIZE): Define to 0x1000.
(bfd_elf32_bfd_copy_private_bfd_data,
bfd_elf32_bfd_link_hash_table_create,
bfd_elf32_bfd_link_hash_table_free, elf_backend_can_refcount,
elf_backend_want_got_plt, elf_backend_want_dynbss,
elf_backend_plt_readonly, elf_backend_got_header_size,
elf_backend_gc_sweep_hook, elf_backend_modify_program_headers,
elf_backend_create_dynamic_sections, elf_backend_adjust_dynamic_symbol,
elf_backend_check_relocs, elf_backend_add_symbol_hook,
elf_backend_symbol_processing, elf_backend_link_output_symbol_hook,
elf_backend_section_from_bfd_section,
elf_backend_finish_dynamic_symbol, elf_backend_always_size_sections,
elf32_tic6x_size_dynamic_sections, elf_backend_finish_dynamic_sections,
elf_backend_omit_section_dynsym, elf_backend_plt_sym_val): Define.
* bfd/reloc.c (BFD_RELOC_C6000_JUMP_SLOT, BFD_RELOC_C6000_EHTYPE,
BFD_RELOC_C6000_PCR_H16, BFD_RELOC_C6000_PCR_S16): Add.
* bfd/bfd-in2.h: Regenerate.
* bfd/libbfd.h: Regenerate.
* config.bfd: Accept tic6x-*-* instead of tic6x-*-elf.
gas/
* config/tc-tic6x.c (sbss_section, scom_section, scom_symbol): New
static variables.
(md_begin): Initialize them.
(s_tic6x_scomm): New static function.
(md_pseudo_table): Add "scomm".
(tc_gen_reloc): Really undo all adjustments made by
bfd_install_relocation.
* doc/c-tic6x.texi: Document the .scomm directive.
gas/testsuite/
* gas/tic6x/scomm-directive-1.s: New test.
* gas/tic6x/scomm-directive-1.d: New test.
* gas/tic6x/scomm-directive-2.s: New test.
* gas/tic6x/scomm-directive-2.d: New test.
* gas/tic6x/scomm-directive-3.s: New test.
* gas/tic6x/scomm-directive-3.d: New test.
* gas/tic6x/scomm-directive-4.s: New test.
* gas/tic6x/scomm-directive-4.d: New test.
* gas/tic6x/scomm-directive-5.s: New test.
* gas/tic6x/scomm-directive-5.d: New test.
* gas/tic6x/scomm-directive-6.s: New test.
* gas/tic6x/scomm-directive-6.d: New test.
* gas/tic6x/scomm-directive-7.s: New test.
* gas/tic6x/scomm-directive-7.d: New test.
* gas/tic6x/scomm-directive-8.s: New test.
* gas/tic6x/scomm-directive-8.d: New test.
ld/
* emulparams/elf32_tic6x_le.sh (BIG_OUTPUT_FORMAT, EXTRA_EM_FILE,
GENERATE_SHLIB_SCRIPT): New defines.
(TEXT_START_ADDR): Define differently depending on target.
(.got): Redefine to include "*(.dsbt)".
(SDATA_START_SYMBOLS): Remove, replace with
(OTHER_GOT_SYMBOLS): New.
(OTHER_BSS_SECTIONS): Define only for ELF targets.
* emultempl/tic6xdsbt.em: New file.
* gen-doc.texi: Set C6X.
* ld.texinfo: Likewise.
(Options specific to C6X uClinux targets): New section.
binutils/
* readelf.c (get_symbol_index_type): Handle SCOM for TIC6X.
(dump_relocations): Likewise.
binutils/testsuite/
* lib/binutils-common.exp (is_elf_format): Accept tic6x*-*-uclinux*.
ld/testsuite/
* ld-scripts/crossref.exp: Add CFLAGS for tic6x*-*-*.
* ld-elf/sec-to-seg.exp: Remove tic6x from list of targets defining
pagesize to 1.
* ld-tic6x/tic6x.exp: Add support for DSBT shared library/executable
linking tests.
* ld-tic6x/dsbt.ld: New linker script.
* ld-tic6x/dsbt-be.ld: New linker script.
* ld-tic6x/dsbt-overflow.ld: New linker script.
* ld-tic6x/dsbt-inrange.ld: New linker script.
* ld-tic6x/shlib-1.s: New test.
* ld-tic6x/shlib-2.s: New test.
* ld-tic6x/shlib-app-1r.s: New test.
* ld-tic6x/shlib-app-1.s: New test.
* ld-tic6x/shlib-1.sd: New test.
* ld-tic6x/shlib-1.dd: New test.
* ld-tic6x/shlib-app-1.rd: New test.
* ld-tic6x/shlib-app-1rb.rd: New test.
* ld-tic6x/shlib-app-1.sd: New test.
* ld-tic6x/static-app-1rb.od: New test.
* ld-tic6x/shlib-app-1.dd: New test.
* ld-tic6x/shlib-app-1rb.sd: New test.
* ld-tic6x/static-app-1b.od: New test.
* ld-tic6x/static-app-1r.od: New test.
* ld-tic6x/shlib-1rb.rd: New test.
* ld-tic6x/shlib-app-1rb.dd: New test.
* ld-tic6x/shlib-1rb.sd: New test.
* ld-tic6x/shlib-1rb.dd: New test.
* ld-tic6x/shlib-app-1b.od: New test.
* ld-tic6x/tic6x.exp: New test.
* ld-tic6x/static-app-1rb.rd: New test.
* ld-tic6x/shlib-app-1r.od: New test.
* ld-tic6x/static-app-1.od: New test.
* ld-tic6x/static-app-1b.rd: New test.
* ld-tic6x/static-app-1r.rd: New test.
* ld-tic6x/static-app-1rb.sd: New test.
* ld-tic6x/static-app-1b.sd: New test.
* ld-tic6x/static-app-1rb.dd: New test.
* ld-tic6x/static-app-1r.sd: New test.
* ld-tic6x/static-app-1b.dd: New test.
* ld-tic6x/shlib-1b.rd: New test.
* ld-tic6x/static-app-1r.dd: New test.
* ld-tic6x/shlib-app-1b.rd: New test.
* ld-tic6x/shlib-1r.rd: New test.
* ld-tic6x/shlib-app-1r.rd: New test.
* ld-tic6x/shlib-1b.sd: New test.
* ld-tic6x/static-app-1.rd: New test.
* ld-tic6x/shlib-app-1b.sd: New test.
* ld-tic6x/shlib-1r.sd: New test.
* ld-tic6x/shlib-1b.dd: New test.
* ld-tic6x/shlib-app-1r.sd: New test.
* ld-tic6x/shlib-app-1b.dd: New test.
* ld-tic6x/shlib-1r.dd: New test.
* ld-tic6x/static-app-1.sd: New test.
* ld-tic6x/shlib-app-1r.dd: New test.
* ld-tic6x/static-app-1.dd: New test.
* ld-tic6x/shlib-noindex.rd: New test.
* ld-tic6x/shlib-noindex.dd: New test.
* ld-tic6x/shlib-noindex.sd: New test.
* ld-tic6x/got-reloc-local-1.s: New test.
* ld-tic6x/got-reloc-local-2.s: New test.
* ld-tic6x/got-reloc-local-r.d: New test.
* ld-tic6x/got-reloc-global.s: New test.
* ld-tic6x/got-reloc-global-addend-1.d: New test.
* ld-tic6x/got-reloc-global-addend-1.s: New test.
* ld-tic6x/got-reloc-global-addend-2.d: New test.
* ld-tic6x/got-reloc-inrange.d: New test.
* ld-tic6x/got-reloc-overflow.d: New test.
* ld-tic6x/got-reloc-global-addend-2.s: New test.
* ld-tic6x/dsbt-index-error.d: New test.
* ld-tic6x/dsbt-index.d: New test.
* ld-tic6x/dsbt-index.s: New test.
* ld-tic6x/shlib-app-1.od: New test.
* ld-tic6x/shlib-app-1rb.od: New test.
* ld-tic6x/shlib-1.rd: New test.
* ld-tic6x/weak.d: New test.
* ld-tic6x/weak-be.d: New test.
* ld-tic6x/weak.s: New test.
* ld-tic6x/weak-data.d: New test.
* ld-tic6x/common.d: New test.
* ld-tic6x/common.ld: New test.
* ld-tic6x/common.s: New test.
2011-03-31 08:58:28 +00:00
00e98fc759
binutils/
...
2011-03-31 Tristan Gingold <gingold@adacore.com>
* readelf.c (get_ia64_vms_note_type): New function.
(print_ia64_vms_note): Ditto.
(process_note): Recognize VMS/ia64 specific notes.
Display them.
(process_corefile_note_segment): Decode VMS notes.
include/elf
2011-03-31 Tristan Gingold <gingold@adacore.com>
* ia64.h (Elf64_External_VMS_Note): New struct.
(NT_VMS_MHD, NT_VMS_LNM, NT_VMS_SRC, NT_VMS_TITLE, NT_VMS_EIDC,
NT_VMS_FPMODE, NT_VMS_LINKTIME, NT_VMS_IMGNAM, NT_VMS_IMGID
NT_VMS_LINKID, NT_VMS_IMGBID, NT_VMS_GSTNAM, NT_VMS_ORIG_DYN)
NT_VMS_PATCHTIME) New macros.
2011-03-31 07:49:45 +00:00
877c169de7
2011-03-30 Catherine Moore <clm@codesourcery.com>
...
* addr2line.c (translate_addresses): Sign extend the pc
if sign_extend_vma is enabled.
2011-03-30 16:09:40 +00:00
2842702f2f
* readelf.c (process_gnu_liblist): Stop memory leak.
2011-03-30 15:37:48 +00:00
9382dad2ae
* coffdump.c: Include bfd_stdint.h
2011-03-29 02:06:53 +00:00
fbe3e2c8df
* coffdump.c (coff_dump): Correct spelling error.
...
(show_usage): Replace SYSROFF by COFF.
2011-03-28 15:24:02 +00:00
1a9911c3b8
* coffdump.c (dump_coff_scope): Use double typecast for pointer P
...
to allow compilation for all targets.
2011-03-28 11:58:18 +00:00
767221a942
* dwarf.c (decode_location_expression): Use dwarf_vmatoa
...
function to display DW_OP_addr OP.
(process_debug_info): Use dwarf_vma type for local variables
length and type_offset.
2011-03-25 18:01:58 +00:00
49e7b35019
* dwarf.c (process_debug_info): Use offset_size to determine
...
the bit-size of the computation unit's offset.
2011-03-25 17:54:57 +00:00
c48d800e15
* bucomm.c (make_tempname): Stop memory leak.
...
ICVS: ----------------------------------------------------------------------
2011-03-25 17:51:10 +00:00
4b41844bd9
* objdump.c (dump_reloc_set): Free malloced memory.
2011-03-25 17:49:32 +00:00
1fcab1afa6
* stabs.c (parse_stab_enum_type): Fix memory leaks.
...
(parse_stab_struct_type): Ditto.
(parse_stab_struct_fields): Ditto.
(parse_stab_one_struct_field): Ditto.
(parse_stab_members): Ditto.
(stab_demangle_qualified): Ditto.
2011-03-25 17:46:07 +00:00
09192bc76c
* prdbg.c (pr_function_type): Close memory leaks.
...
(pr_method_type): Likewise.
(tg_class_static_member): Likewise.
(tg_class_method_variant): Likewise.
(tg_class_static_method_variant): Likewise.
2011-03-25 17:24:28 +00:00
cd37dafcf4
* ieee.c (ieee_add_bb11): Plug memory leak.
...
(ieee_function_type): Likewise.
(ieee_class_baseclass): Likewise.
2011-03-25 17:22:15 +00:00
8e4850a9e3
* ar.c (write_archive): Plug memory leak.
2011-03-25 17:18:54 +00:00
a1bc0327a3
* ar.c (delete_members): Plug memory leak.
2011-03-25 17:17:03 +00:00
6a6969108e
* ar.c (move_members): Plug memory leak.
2011-03-25 17:14:02 +00:00
68187828c0
* strings.c (print_strings): Plug memory leak.
2011-03-25 17:09:08 +00:00
467c65bce2
Replace bfd_vma type and analog types by dwarf_vma and analogs.
...
Use dwarf specific print functions to display these type values.
* dwarf.h (dwarf_signed_vma): New type;
(DWARF2_External_LineInfo): Replace bfd_vma by dwarf_vma.
(DWARF2_External_PubNames): Likewise.
(DWARF2_External_CompUnit): Likewise.
(DWARF2_External_ARange): Likewise.
(read_leb128): Change return type to dwarf_vma.
* dwarf.c (print_dwarf_vma): Use __MINGW32__ conditional and
check byte_size values.
(dwarf_vmatoa): Change parameter type to dwarf_vma.
(dwarf_svmatoa): New static function.
(read_leb128): Change return type to dwarf_vma.
(read_sleb128): New static function.
(struct State_Machine_Registers): Change address field type to
dwarf_vma.
(process_extended_line_op): Adapt to type changes.
(fetch_indirect_string): Likewise.
(idisplay_block): Likewise.
(decode_location_expression): Likewise.
(read_and_display_attr_value): Likewise.
(process_debug_info): Likewise.
(display_debug_lines_raw): Likewise.
(display_debug_lines_decoded): Likewise.
(SLEB macro): Use new read_sleb128 function.
2011-03-25 15:15:52 +00:00
c60ce34ad5
PR 12590
...
* ar.c (ranlib_main): Init arg_index properly.
(usage): Describe --target.
2011-03-17 12:56:35 +00:00
629e7ca8ec
* dwarf.c (dw_TAG_name): Handle DW_TAG_GNU_call_site_parameter.
...
(read_and_display_attr_value): Handle DW_AT_GNU_call_site_data_value,
DW_AT_GNU_call_site_target and DW_AT_GNU_call_site_target_clobbered.
(get_AT_name): Handle DW_AT_GNU_call_site_value,
DW_AT_GNU_call_site_data_value, DW_AT_GNU_call_site_target,
DW_AT_GNU_call_site_target_clobbered, DW_AT_GNU_tail_call,
DW_AT_GNU_all_tail_call_sites, DW_AT_GNU_all_call_sites and
DW_AT_GNU_all_source_call_sites.
(decode_location_expression) <case DW_OP_GNU_entry_value>: Adjust
handling.
* dwarf.c (get_TAG_name): Handle DW_TAG_GNU_call_site.
(decode_location_expression): Handle DW_OP_GNU_entry_value.
(read_and_display_attr_value): Handle DW_AT_GNU_call_site_value.
(get_AT_name): Likewise.
2011-03-16 13:00:10 +00:00
0cbf353135
2011-03-14 Michael Snyder <msnyder@vmware.com>
...
* objcopy.c (set_pe_subsystem): Free subsystem.
2011-03-14 20:51:59 +00:00
c30fe01daf
2011-03-08 Michael Snyder <msnyder@vmware.com>
...
* wrstabs.c (stab_start_struct_type): Close memory leak.
2011-03-14 19:05:39 +00:00
0429c154e1
2011-03-07 Michael Snyder <msnyder@vmware.com>
...
* readelf.c (process_version_sections): Free symbols.
2011-03-14 17:48:31 +00:00
497b9b328d
2011-03-07 Michael Snyder <msnyder@vmware.com>
...
* nm.c (display_rel_file): Free symsizes.
2011-03-14 17:37:53 +00:00
8f7e76d024
* common.h (EM_V850): V850s now supplied by Renesas.
...
* readelf.c (get_machine_name): Update EM_V850 entry.
2011-03-10 10:23:37 +00:00
505f141243
objdump: fix typo in help message
2011-03-03 09:38:37 +00:00
5115b233c7
PR binutils/12523
...
* readelf.c (process_object): Clear dynamic_info_DT_GNU_HASH.
2011-03-01 00:02:32 +00:00
8b6efd89a4
ChangeLog binutils/
...
2011-02-28 Kai Tietz <kai.tietz@onevision.com>
* debug.c (debug_start_source): Use filename_(n)cmp.
* ieee.c (ieee_finish_compilation_unit): Likewise.
(ieee_lineno): Likewise.
* nlmconv.c (main): Likewise.
* objcopy.c (strip_main): Likewise.
(copy_main): Likewise.
* objdump.c (show_line): Likewise.
(dump_reloc_set): Likewise.
* srconv.c (main): Likewise.
* wrstabs.c (stab_lineno): Likewise.
ChangeLog gas/
2011-02-28 Kai Tietz <kai.tietz@onevision.com>
* depend.c (register_dependency): Use filename_(n)cmp.
* dwarf2dbg.c (get_filenum): Likewise.
* ecoff.c (add_file): Likewise.
(ecoff_generate_asm_lineno): Likewise.
* input-scrub.c (new_logical_line_flags): Likewise.
* listing.c (file_info): Likewise.
(listing_newline): Likewise.
* remap.c (remap_debug_filename): Likewise.
* stabs.c (generate_asm_file): Likewise.
(stabs_generate_asm_lineno): Likewise.
2011-02-28 18:32:52 +00:00
61865e301b
* readelf.c (decode_arm_unwind): Implement decoding of remaining
...
ARM unwind instructions (i.e. VFP/NEON and Intel Wireless MMX).
2011-02-24 11:57:26 +00:00
47704ddfbe
ChangeLog include/
...
2011-02-23 Kai Tietz <kai.tietz@onevision.com>
* dwarf2.h (_ELF_DWARF2_H): Renamed to
_DWARF2_H.
(DWARF2_External_LineInfo, DWARF2_Internal_LineInfo,
DWARF2_External_PubNames, DWARF2_Internal_PubNames,
DWARF2_External_CompUnit, DWARF2_Internal_CompUnit,
DWARF2_External_ARange, DWARF2_Internal_ARange): Removed.
ChangeLog binutils/
2011-02-23 Kai Tietz <kai.tietz@onevision.com>
* dwarf.c (read_leb128): Use bfd_vma instead of
long type.
(dwarf_vmatoa): New helper routine.
(process_extended_line_op): Use for adr bfd_vma
type and print those typed values via BFD_VMA_FMT
or via dwarf_vmatoa for localized prints.
(fetch_indirect_string): Adjust offset's type.
(decode_location_expression): Adjust argument types
and uvalue type.
(read_and_display_attr_value): Likewise.
(read_and_display_attr): Likewise.
(decode_location_expression): Adjust printf format.
(process_debug_info): Likewise.
(display_debug_lines_raw): Likewise.
(display_debug_lines_decoded): Likewise.
(display_debug_pubnames): Likewise.
(display_debug_loc): Likewise.
(display_debug_aranges): Likewise.
* dwarf.h (DWARF2_External_LineInfo,
DWARF2_Internal_LineInfo, DWARF2_External_PubNames,
DWARF2_Internal_PubNames, DWARF2_External_CompUnit,
DWARF2_Internal_CompUnit, DWARF2_External_ARange,
DWARF2_Internal_ARange): Added..
(read_leb128): Adjust return type.
2011-02-23 08:52:34 +00:00
822ce8ee21
Remove freebsd1 from libtool.m4 macros and config.rpath.
...
/:
Import from Libtool and gnulib:
2011-01-27 Gerald Pfeifer <gerald@pfeifer.com>
Prepare for supporting FreeBSD 10.
* config.rpath: Remove handling of freebsd1* which soon would
match FreeBSD 10.0.
2011-01-20 Gerald Pfeifer <gerald@pfeifer.com> (tiny change)
Remove support for FreeBSD 1.x.
* libtool.m4 (_LT_LINKER_SHLIBS)
(_LT_SYS_DYNAMIC_LINKER): Remove handling of freebsd1* which
soon would incorrectly match FreeBSD 10.0.
bfd/:
* configure: Regenerate.
gas/:
* configure: Regenerate.
ld/:
* configure: Regenerate.
opcodes/:
* configure: Regenerate.
binutils/:
* configure: Regenerate.
gprof/:
* configure: Regenerate.
2011-02-13 21:00:14 +00:00
82f2dbf73d
PR binutils/12467
...
* readelf.c (process_program_headers): Issue a warning if there
are no program headers but the file header has a non-zero program
header offset.
(process_section_headers): Issue a warning if there are no section
headers but the file header has a non-zero section header offset.
(process_section_groups): Reword the no section message so that it
can be distinguished from the one issued by process_section_headers.
* elf.c (assign_file_positions_for_load_sections): Set the program
header offset and entry size to zero if there are no program
headers.
2011-02-08 09:40:05 +00:00
6ec8b48eb8
binutils/
...
* dwarf.c (display_gdb_index): Support version 4, warn on version 3.
2011-01-26 10:27:46 +00:00
293c573efd
* readelf.c (process_object): Free dynamic_section after use.
2011-01-19 18:19:54 +00:00
2b52916eef
Reset dump_sects after processing each archive member.
...
2011-01-18 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/12408
* readelf.c (process_archive): Free and reset dump_sects
after processing each archive member.
2011-01-18 17:43:56 +00:00
7a88bc9c3d
* readelf.c (print_symbol): Handle symbol characters as unsigned.
...
Whitespace fixes.
2011-01-11 10:46:55 +00:00
f74656046a
* po/da.po: Updated Danish translation.
2011-01-10 13:51:10 +00:00
9849fbfc41
* bucomm.c (get_file_size): Check for negative sizes and issue a
...
warning message if encountered.
2011-01-06 11:34:28 +00:00
47a50e5b13
* lib/binutils-common.exp (regexp_diff): Use "==" instead of "eq".
2011-01-03 16:53:28 +00:00
4fb3aee212
Update copyright in comments to 2011.
2011-01-01 21:42:17 +00:00
0db46eb403
Update copyright to 2011.
...
binutils/
2011-01-01 H.J. Lu <hongjiu.lu@intel.com>
* version.c (print_version): Update copyright to 2011.
gas/
2011-01-01 H.J. Lu <hongjiu.lu@intel.com>
* gas.c (parse_args): Update copyright to 2011.
gold/
2011-01-01 H.J. Lu <hongjiu.lu@intel.com>
* version.cc (print_version): Update copyright to 2011.
ld/
2011-01-01 H.J. Lu <hongjiu.lu@intel.com>
* ldver.c (ldversion): Update copyright to 2011.
opcodes/
2011-01-01 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (process_copyright): Update copyright to 2011.
2011-01-01 20:55:48 +00:00
9e9e082043
Rotate binutils ChangeLogs.
2011-01-01 16:43:53 +00:00
8941d5e8f1
* binutils-all/copy-2.d: Change "hppa" to "hppa*" in not-target list.
...
* binutils-all/copy-3.d: Add hppa*-*-hpux* to not-target list.
* binutils-all/objcopy.exp (reverse-bytes): xfail on 32-bit hpux.
2011-01-01 01:56:59 +00:00
aeffff6722
bfd/
...
2010-12-23 Robert Millan <rmh@gnu.org>
* config.bfd: Recognize mips-freebsd and mips-kfreebsd-gnu.
* configure.host: Likewise.
* configure.in: Support for `bfd_elf32_ntradbigmips_freebsd_vec',
`bfd_elf32_ntradlittlemips_freebsd_vec',
`bfd_elf32_tradbigmips_freebsd_vec',
`bfd_elf32_tradlittlemips_freebsd_vec',
`bfd_elf64_tradbigmips_freebsd_vec' and
`bfd_elf64_tradlittlemips_freebsd_vec'.
* configure: Regenerate.
* elf32-mips.c: New target for FreeBSD support
(same as traditional MIPS but overrides ELF_OSABI
with ELFOSABI_FREEBSD).
* elf64-mips.c: Likewise.
* elfn32-mips.c: Likewise.
* targets.c (_bfd_target_vector): Add
`bfd_elf32_ntradbigmips_freebsd_vec',
`bfd_elf32_ntradlittlemips_freebsd_vec',
`bfd_elf32_tradbigmips_freebsd_vec',
`bfd_elf32_tradlittlemips_freebsd_vec',
`bfd_elf64_tradbigmips_freebsd_vec' and
`bfd_elf64_tradlittlemips_freebsd_vec'.
ld/
2010-12-14 Robert Millan <rmh@gnu.org>
* configure.tgt: Recognize mips-freebsd and mips-kfreebsd-gnu.
* emulparams/elf32btsmip_fbsd.sh: New file.
* emulparams/elf32btsmipn32_fbsd.sh: Likewise.
* emulparams/elf32ltsmip_fbsd.sh: Likewise.
* emulparams/elf32ltsmipn32_fbsd.sh: Likewise.
* emulparams/elf64btsmip_fbsd.sh: Likewise.
* emulparams/elf64ltsmip_fbsd.sh: Likewise.
* Makefile.am: Add build rules for `eelf32btsmip_fbsd.c',
`eelf32btsmipn32_fbsd.c', `eelf32ltsmip_fbsd.c',
`eelf32ltsmipn32_fbsd.c', `eelf64btsmip_fbsd.c' and
`eelf64ltsmip_fbsd.c'.
* Makefile.in: Regenerate.
gas/
2010-12-19 Robert Millan <rmh@gnu.org>
Richard Sandiford <rdsandiford@googlemail.com>
* config/tc-mips.c (ELF_TARGET): New macro. Generates target
names accordingly to whether TE_FreeBSD and whether TE_TMIPS
are defined.
(mips_target_format): Refactor code using ELF_TARGET().
(support_64bit_objects): Likewise.
* configure.in: Recognize mips-freebsd and mips-kfreebsd-gnu.
* configure.tgt: Likewise.
* configure: Regenerate.
binutils/testsuite/
* binutils-all/readelf.exp: Handle MIPS FreeBSD targets.
gas/testsuite/
* gas/mips/e32el-rel2.d: Accept any file format.
* gas/mips/elf-rel.d: Likewise.
* gas/mips/elf-rel2.d: Likewise.
* gas/mips/elf-rel3.d: Likewise.
* gas/mips/elfel-rel.d: Likewise.
* gas/mips/elfel-rel2.d: Likewise.
* gas/mips/elfel-rel3.d: Likewise.
* gas/mips/ldstla-32-mips3-shared.d: Likewise.
* gas/mips/ldstla-32-mips3.d: Likewise.
* gas/mips/ldstla-32-shared.d: Likewise.
* gas/mips/ldstla-32.d: Likewise.
* gas/mips/ldstla-n64-shared.d: Likewise.
* gas/mips/ldstla-n64.d: Likewise.
* gas/mips/noat-1.d: Likewise.
* gas/mips/set-arch.d: Likewise.
* gas/mips/tls-o32.d: Likewise.
ld/testsuite/
* ld-mips-elf/mips-elf-flags.exp: Handle FreeBSD targets.
* ld-mips-elf/mips-elf.exp: Likewise.
* ld-mips-elf/mips16-call-global.d: Accept any file format.
* ld-mips-elf/mips16-intermix.d: Likewise.
2010-12-31 11:01:00 +00:00
da88a76442
2010-12-15 Kai Tietz <kai.tietz@onevision.com>
...
* dwarf.c (display_gdb_index): Fix printf types for
used formatters.
2010-12-15 08:45:59 +00:00
08ebfb8c18
Fix typos in elfedit documentation.
...
2010-12-12 Peter Breitenlohner <peb@mppmu.mpg.de>
PR binutils/12306
* doc/binutils.texi: Fix typos in elfedit documentation.
2010-12-12 15:29:31 +00:00
13485ea2e5
* binemul.h (do_ar_emul_append): Declare.
...
* binemul.c (any_ok): New function.
(do_ar_emul_append): Rename from do_ar_emul_default_append. Make
global, add check arg. Adjust callers.
(ar_emul_default_replace): Tidy.
* configure.tgt (powerpc-*-aix[5-9]*,rs6000-*-aix[5-9]*): Use
bin_aix_emulation.
* emul_aix.c (bin_aix5_emulation, ar_emul_aix_internal): Delete.
(ar_emul_aix5_append, ar_emul_aix5_replace): Delete.
(check_aix): New function.
(ar_emul_aix_append, ar_emul_aix_replace): Rewrite.
2010-12-10 08:51:47 +00:00
738f4d98b4
gas/
...
* config/tc-mips.c (file_ase_mips16): Adjust comment.
(append_insn): Update file_ase_mips16.
(mips_after_parse_args): Don't set file_ase_mips16 here.
gas/testsuite/
* gas/mips/elf_ase_mips16.d: Update test for new MIPS16 ASE flag
semantics.
* gas/mips/elf_ase_mips16-2.d: New test.
* gas/mips/nop.s: Source for the new test.
* gas/mips/mips.exp: Run the new test.
binutils/testsuite/
* lib/binutils-common.exp (regexp_diff): Implement inverse
matching, requested by `!'.
2010-12-09 23:57:22 +00:00
8b9a522f57
bfd/binutils/gas/gprof/ld/libiberty/opcodes: add .gitignore
...
This seems to cover a few random targets as well as --enable-targets=all.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-12-09 09:03:18 +00:00
dbcf63876c
* ar.c: Formatting.
...
(usage): Correct help strings.
(decode_options): Correct getopt_long short options. Remove
duplicate non-handled option message.
(main): Don't handle -M specially.
2010-12-08 05:05:30 +00:00
90b79792c0
* ar.c (long_options): Add target.
...
(decode_options): Handle the --target option.
(open_inarch): Check for plugin's target, default to --target
(replace_members): Use generic `target'.
2010-12-08 05:00:14 +00:00
4e4075512b
* ar.c (operation): New global variable.
...
(show_version): Likewise.
(show_help): Likewise.
(long_options): Likewise.
(usage): Fix help string argument order.
(decode_options): New.
(ranlib_main): Use getopt_long.
(main): Use decode_options.
2010-12-08 04:59:36 +00:00
1154c3efa1
* ar.c (main): Split ranlib path.
...
(ranlib_usage): New
(ranlib_main): New
2010-12-08 04:58:23 +00:00
5bbdf3d565
* dwarf.c: #include "bfd_stdint.h".
...
(do_gdb_index): New global.
(display_gdb_index): New function.
(dwarf_select_sections_by_names) Add "gdb_index".
(dwarf_select_sections_all): Set do_gdb_index.
(debug_displays): Add .gdb_index.
* dwarf.h (do_gdb_index): Declare.
* objdump.c (usage): Add gdb_index.
* readelf.c (usage): Add gdb_index.
(process_section_headers): Process ".gdb_index".
* doc/binutils.texi (readelf): Document gdb_index dump.
(objdump): Ditto.
2010-12-03 17:07:20 +00:00
04276a0cf5
2010-12-01 Kai Tietz <kai.tietz@onevision.com>
...
PR binutils/11065
* dlltool.c (dll_name_set_by_exp_name): New variable.
(def_name): Allow setting of dll_name by .def file.
(def_library): Likewise.
(main): Set dll_name_set_by_exp_name, if dll_name is
set indirect by exp_name.
2010-12-01 14:15:06 +00:00
bad62cf581
* dwarf.c (decode_location_expression, display_debug_frames): Move
...
code handling DW_EH_PE_pcrel into..
(get_encoded_value): ..here.
2010-11-26 05:35:01 +00:00
a9a7adc0f4
update japanese translation
2010-11-26 00:00:55 +00:00
1de34e0afe
Update translations
2010-11-25 06:08:52 +00:00
3284fe0c5e
Add and use elfcomm.c/elfcomm.h.
...
2010-11-21 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/12235
* elfcomm.c: New.
* elfcomm.h: Likewise.
* Makefile.am (HFILES): Add elfcomm.h.
(CFILES): Add elfcomm.c.
(ELFLIBS): New.
(readelf_SOURCES): Add $(ELFLIBS).
(elfedit_SOURCES): Likewise.
(objdump_SOURCES): Likewise.
* Makefile.in: Regenerated.
* dwarf.c: Include "elfcomm.h".
(byte_get): Removed.
(byte_get_little_endian): Likewise.
(byte_get_big_endian): Likewise.
(byte_get_signed): Likewise.
(error): Likewise.
(warn): Likewise.
* dwarf.h (dwarf_vma): Defined with HOST_WIDEST_INT.
(dwarf_size_type): Likewise.
(byte_get): Removed.
(byte_get_signed): Likewise.
(byte_get_little_endian): Likewise.
(byte_get_big_endian): Likewise.
(error): Likewise.
(warn): Likewise.
* elfedit.c: Include "elfcomm.h". Don't include "aout/ar.h".
Call error () instead of non_fatal ().
(streq): Removed.
(strneq): Likewise.
(const_strneq): Likewise.
(non_fatal): Likewise.
(BYTE_GET): Likewise.
(BYTE_PUT): Likewise.
(byte_get): Likewise.
(byte_put): Likewise.
(byte_get_little_endian): Likewise.
(byte_get_big_endian): Likewise.
(byte_put_little_endian): Likewise.
(byte_put_big_endian): Likewise.
(adjust_relative_path): Likewise.
(archive_info): Likewise.
(setup_archive): Likewise.
(release_archive): Likewise.
(setup_nested_archive): Likewise.
(get_archive_member_name): Likewise.
(get_archive_member_name_at): Likewise.
(make_qualified_name): Likewise.
* objdump.c: Include "elfcomm.h".
* readelf.c: Include "elfcomm.h". Don't include "aout/ar.h".
(BYTE_GET): Removed.
(BYTE_GET_SIGNED): Removed.
(streq): Likewise.
(strneq): Likewise.
(const_strneq): Likewise.
(byte_put): Likewise.
(byte_put_little_endian): Likewise.
(byte_put_big_endian): Likewise.
(adjust_relative_path): Likewise.
(archive_info): Likewise.
(setup_archive): Likewise.
(release_archive): Likewise.
(setup_nested_archive): Likewise.
(get_archive_member_name): Likewise.
(get_archive_member_name_at): Likewise.
(make_qualified_name): Likewise.
2010-11-21 21:27:15 +00:00
eb22018c4c
binutils/testsuite/
...
* lib/binutils-common.exp (regexp_diff): New procedure.
* lib/utils-lib.exp (regexp_diff): Delete.
gas/testsuite/
* lib/gas-defs.exp (regexp_diff): Delete.
(run_dump_test): Remove final "" argument in call to regexp_diff.
(run_list_test): Likewise.
(run_list_test_stdin): Likewise.
* gas/all/gas.exp (test_cond): Likewise.
* gas/elf/elf.exp (run_elf_list_test): Likewise.
* gas/m68k/all.exp: Likewise.
* gas/mep/complex-relocs.exp (regexp_test): Likewise.
* gas/mt/relocs.exp (regexp_test): Likewise.
* gas/symver/symver.exp (run_error_test): Likewise.
ld/testsuite/
* lib/ld-lib.exp (regexp_diff, simple_diff): Delete.
2010-11-20 15:36:34 +00:00
f3097f3364
binutils/testsuite/
...
* lib/binutils-common.exp: New file.
* lib/utils-lib.exp (load_common_lib): New function. Load
binutils-common.exp.
(is_elf_format): Delete.
gas/testsuite/
* lib/gas-defs.exp (load_common_lib): New function. Load
binutils-common.exp.
(is_elf_format, is_aout_format, is_pecoff_format): Delete.
ld/testsuite/
* lib/ld-lib.exp (load_common_lib): New function. Load
binutils-common.exp.
(is_elf_format, is_elf64, is_aout_format, is_pecoff_format): Delete.
2010-11-20 15:36:10 +00:00
3832723d11
PR binutils/11742
...
* readelf.c (get_archive_member_name): Formatting. Properly
handle full size ar_name.
2010-11-18 07:54:07 +00:00
cc5914eb31
* ar.c (print_contents): Don't internationalize strings without words.
...
* dwarf.c (process_extended_line_op): Likewise.
(process_debug_info): Likwise.
(display_debug_lines_raw): Likewise.
(display_debug_lines_decoded): Likewise.
(display_debug_abbrev): Likewise.
* readelf.c (process_file_header): Likewise.
(GET_OP): Likewise.
(decode_arm_unwind): Likewise.
(process_mips_specific): Likewise.
* resrc.c (run_cmd): Likewise.
(rcparse_warning): Likewise.
* objdump.c (dump_headers): Don't print "Pg".
2010-11-17 03:35:50 +00:00
426fb1a6d0
* windmc.c: ,%s' -> `%s' in a number of strings.
2010-11-15 23:54:23 +00:00
781303cee5
blackfin: add support for L1 code/data flags
...
Add new linker options for marking programs to load into L1 memory
at runtime. This needs new EF flag bits, so declare them.
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-11-15 22:30:47 +00:00
38626e2529
Use binutils_assemble_flags for --nocompress-debug-sections.
...
2010-11-15 H.J. Lu <hongjiu.lu@intel.com>
* binutils-all/compress.exp: Replace binutils_assemble with
binutils_assemble_flags for --nocompress-debug-sections.
2010-11-15 21:05:26 +00:00
6dbf72d7a6
Also expect .zdebug in DWARF debug section name.
...
binutils/testsuite/
2010-11-15 H.J. Lu <hongjiu.lu@intel.com>
* binutils-all/compress.exp: Pass --nocompress-debug-sections to
assembler for uncompressed debug sections.
* binutils-all/testranges.d: Also expect .zdebug in section name.
gas/testsuite/
2010-11-15 H.J. Lu <hongjiu.lu@intel.com>
* gas/elf/dwarf2-3.d: Also expect .zdebug in section name.
* gas/i386/debug1.d: Likewise.
* gas/lns/lns-common-1.d: Likewise.
* gas/lns/lns-duplicate.d: Likewise.
2010-11-15 18:14:11 +00:00
fd50354116
bfd/
...
* archures.c (bfd_mach_mips_loongson_3a): Defined.
* bfd-in2.h (bfd_mach_mips_loongson_3a): Defined.
* cpu-mips.c (I_loongson_3a): New add.
(arch_info_struct): Add loongson_3a.
* elfxx-mips.c (_bfd_elf_mips_mach): Add loongson_3a.
(mips_set_isa_flags): Add loongson_3a.
(mips_mach_extensions): Add loongson_3a in MIPS64 extensions.
binutils/
* readelf.c (get_machine_flags): Add loongson-3a.
gas/
* config/tc-mips.c (mips_cpu_info_table): Add loongson3a in MIPS 64.
* doc/c-mips.texi (MIPS cpu): Add loongson3a.
include/
* elf/mips.h (E_MIPS_MACH_LS3A): Defined.
* opcode/mips.h (INSN_LOONGSON_3A): Defined.
(CPU_LOONGSON_3A): Defined.
(OPCODE_IS_MEMBER): Add LOONGSON_3A.
opcodes/
* mips-dis.c (mips_arch_choices): Add loongson3a.
* mips-opc.c (IL3A): Defined as INSN_LOONGSON_3A.
(mips_builtin_opcodes): Modify some instructions' membership from
IL2F to IL2F|IL3A, since these instructions are supported by Loongson_3A.
2010-11-11 10:23:39 +00:00
8e295ce05a
Updated translations.
2010-11-10 14:39:10 +00:00
6548efc112
Updated Japanese translations.
2010-11-08 11:37:07 +00:00
5940a93c84
Improve binutils testsuite coverage for GNU/Hurd.
...
binutils/testsuite/
* lib/utils-lib.exp (is_elf_format): Consider for *-*-gnu*, too.
* binutils-all/elfedit-2.d (target): Likewise.
* binutils-all/elfedit-3.d (target): Likewise.
* binutils-all/i386/i386.exp: Likewise.
* binutils-all/objcopy.exp: Likewise.
* binutils-all/strip-3.d (target): Likewise.
gas/testsuite/
* lib/gas-defs.exp (is_elf_format): Consider for *-*-gnu*, too.
* gas/elf/elf.exp: Likewise.
* gas/symver/symver.exp: Likewise.
ld/
* configure.host: Add stanza for *-*-gnu*.
ld/testsuite/
* lib/ld-lib.exp (is_elf_format): Consider for *-*-gnu*, too.
* ld-discard/discard.exp: Likewise.
* ld-elf/binutils.exp: Likewise.
* ld-elf/commonpage1.d (target): Likewise.
* ld-elf/compress1c.d (target): Likewise.
* ld-elf/discard1.d (target): Likewise.
* ld-elf/discard2.d (target): Likewise.
* ld-elf/discard3.d (target): Likewise.
* ld-elf/dynsym1.d (target): Likewise.
* ld-elf/eh6.d (target): Likewise.
* ld-elf/elf.exp: Likewise.
(array_tests): Move -static tests to...
(array_tests_static): ... here, and handle it accordingly.
* ld-elf/hash.d (target): Likewise.
* ld-elf/header.d (target): Likewise.
* ld-elf/loadaddr1.d (target): Likewise.
* ld-elf/loadaddr2.d (target): Likewise.
* ld-elf/loadaddr3a.d (target): Likewise.
* ld-elf/loadaddr3b.d (target): Likewise.
* ld-elf/local1.d (target): Likewise.
* ld-elf/maxpage1.d (target): Likewise.
* ld-elf/maxpage2.d (target): Likewise.
* ld-elf/maxpage3a.d (target): Likewise.
* ld-elf/multibss1.d (target): Likewise.
* ld-elf/noload-2.d (target): Likewise.
* ld-elf/seg.d (target): Likewise.
* ld-elf/textaddr1.d (target): Likewise.
* ld-elf/textaddr2.d (target): Likewise.
* ld-elf/textaddr3.d (target): Likewise.
* ld-elf/textaddr4.d (target): Likewise.
* ld-elf/textaddr5.d (target): Likewise.
* ld-elf/textaddr6.d (target): Likewise.
* ld-elf/textaddr7.d (target): Likewise.
* ld-elf/tls_common.exp: Likewise.
* ld-elf/unknown2.d (target): Likewise.
* ld-elfvers/vers.exp: Likewise.
* ld-elfvsb/elfvsb.exp: Likewise.
* ld-elfweak/elfweak.exp: Likewise.
(setup_xfail_gnu_hurd): New function. Use it where appropriate.
* ld-gc/abi-note.d (target): Likewise.
* ld-gc/gc.exp: Likewise.
* ld-gc/pr11218.d (target): Likewise.
* ld-gc/start.d (target): Likewise.
* ld-i386/i386.exp: Likewise.
* ld-ifunc/binutils.exp: Likewise.
* ld-ifunc/ifunc.exp: Likewise.
* ld-linkonce/linkonce.exp: Likewise.
* ld-linkonce/zeroehl32.d (target): Likewise.
* ld-pie/pie.exp: Likewise.
* ld-scripts/phdrs2.exp: Likewise.
* ld-scripts/rgn-at5.d (target): Likewise.
* ld-shared/shared.exp: Likewise.
* ld-undefined/entry-3.d (target): Likewise.
* ld-undefined/entry-4.d (target): Likewise.
* ld-undefined/weak-undef.exp: Likewise.
2010-11-08 06:43:40 +00:00
4e011fb578
bfd/
...
* hash.c (bfd_hash_hash): Extract from..
(bfd_hash_lookup): ..here.
(bfd_hash_rename): New function.
* section.c (bfd_rename_section): New function.
* bfd-in.h (bfd_hash_rename): Declare.
* bfd-in2.h: Regenerate.
* elf.c (_bfd_elf_make_section_from_shdr): Rename input sections
when compressing or decompressing. Don't assert name match.
* elf64-hppa.c (get_reloc_section): Don't assert name match.
* elfxx-ia64.c (get_reloc_section): Likewise.
binutils/
* objcopy.c (copy_main): No need to rename sections when compressing
or decompressing.
binutils/testsuite/
* binutils-all/objdump.W: Adjust expected result for debug section
rename.
2010-11-08 02:48:57 +00:00
7603b4ae74
missed from last commit
2010-11-05 12:01:48 +00:00
9b585a95b7
* bin2c.c: Remove internationalization and version report.
...
* Makefile.am: Update bin2c rule.
* Makefile.in: Regenerate.
2010-11-05 10:50:59 +00:00
2ee0aedfb8
bfd/
...
2010-11-05 Tristan Gingold <gingold@adacore.com>
* po/bfd.pot: Regenerate
binutils/
2010-11-05 Tristan Gingold <gingold@adacore.com>
* po/binutils.pot: Regenerate
gas/
2010-11-05 Tristan Gingold <gingold@adacore.com>
* po/gas.pot: Regenerate
* po/POTFILES.in: Regenerate
gprof/
2010-11-05 Tristan Gingold <gingold@adacore.com>
* po/gprof.pot: Regenerate
ld/
2010-11-05 Tristan Gingold <gingold@adacore.com>
* po/ld.pot: Regenerate
* po/POTFILES.in: Regenerate
opcodes/
2010-11-05 Tristan Gingold <gingold@adacore.com>
* po/opcodes.pot: Regenerate
2010-11-05 10:25:11 +00:00
44f4576731
binutils/
...
2010-11-05 Tristan Gingold <gingold@adacore.com>
* NEWS: Add marker for 2.21.
gas/
2010-11-05 Tristan Gingold <gingold@adacore.com>
* NEWS: Add marker for 2.21.
ld/
2010-11-05 Tristan Gingold <gingold@adacore.com>
* NEWS: Add marker for 2.21.
2010-11-05 08:33:51 +00:00
6b6bc957dd
Don't display bits only used for BFD in abfd->flags.
...
bfd/
2010-11-02 H.J. Lu <hongjiu.lu@intel.com>
* bfd.c (BFD_FLAGS_FOR_BFD_USE_MASK): New.
* bfd-in2.h: Regenerated.
binutils/
2010-11-02 H.J. Lu <hongjiu.lu@intel.com>
* objdump.c (dump_bfd_header): Don't display
BFD_FLAGS_FOR_BFD_USE_MASK bits in abfd->flags.
2010-11-03 02:31:02 +00:00
877791769e
bfd:
...
* elf32-tic6x.c (elf32_tic6x_obj_attrs_arg_type): Except for
Tag_ABI_compatibility, treat odd tags as strings and even ones as
integers.
(elf32_tic6x_obj_attrs_order, elf32_tic6x_tag_to_array_alignment,
elf32_tic6x_array_alignment_to_tag): New.
(elf32_tic6x_merge_attributes): Handle more attributes. Set type
for merged attributes.
(elf_backend_obj_attrs_order): Define.
binutils:
* readelf.c (display_tic6x_attribute): Handle more attributes.
gas:
* config/tc-tic6x.c (OPTION_MPID, OPTION_MPIC, OPTION_MNO_PIC):
New enum values.
(md_longopts): Add options mpid, mpic and mno-pic.
(tic6x_pid_type, tic6x_pid, tic6x_pic, tic6x_pid_type_table,
tic6x_pid_types, tic6x_use_pid): New.
(md_parse_option): Handle new options.
(md_show_usage): Output help text for new options.
(tic6x_set_attributes): Set PID and PIC attributes.
* doc/as.texinfo: Document -mpid=, -mpic and -mno-pic.
* doc/c-tic6x.texi (TIC6X Options): Likewise.
gas/testsuite:
* gas/tic6x/attr-array-directive-1.d,
gas/tic6x/attr-array-directive-1.s,
gas/tic6x/attr-array-directive-2.d,
gas/tic6x/attr-array-directive-2.s,
gas/tic6x/attr-array-directive-3.d,
gas/tic6x/attr-array-directive-3.s,
gas/tic6x/attr-array-directive-4.d,
gas/tic6x/attr-array-directive-4.s,
gas/tic6x/attr-conformance-directive-1.d,
gas/tic6x/attr-conformance-directive-1.s,
gas/tic6x/attr-conformance-directive-2.d,
gas/tic6x/attr-conformance-directive-2.s,
gas/tic6x/attr-pic-directive-1.d,
gas/tic6x/attr-pic-directive-1.s,
gas/tic6x/attr-pic-directive-2.d,
gas/tic6x/attr-pic-directive-2.s,
gas/tic6x/attr-pic-opts-mno-pic.d, gas/tic6x/attr-pic-opts-mpic.d,
gas/tic6x/attr-pid-directive-1.d,
gas/tic6x/attr-pid-directive-1.s,
gas/tic6x/attr-pid-directive-2.d,
gas/tic6x/attr-pid-directive-2.s,
gas/tic6x/attr-pid-opts-mpid-far.d,
gas/tic6x/attr-pid-opts-mpid-near.d,
gas/tic6x/attr-pid-opts-mpid-no.d,
gas/tic6x/attr-stack-directive-1.d,
gas/tic6x/attr-stack-directive-1.s,
gas/tic6x/attr-stack-directive-2.d,
gas/tic6x/attr-stack-directive-2.s,
gas/tic6x/attr-wchar-directive-1.d,
gas/tic6x/attr-wchar-directive-1.s,
gas/tic6x/attr-wchar-directive-2.d,
gas/tic6x/attr-wchar-directive-2.s: New tests.
include/elf:
* tic6x-attrs.h (Tag_ABI_wchar_t, Tag_ABI_stack_align_needed,
Tag_ABI_stack_align_preserved, Tag_ABI_PID, Tag_ABI_PIC,
Tag_ABI_array_object_alignment,
Tag_ABI_array_object_align_expected, Tag_ABI_conformance): Define.
ld/testsuite:
* ld-tic6x/attr-array-16-16.d, ld-tic6x/attr-array-16-4.d,
ld-tic6x/attr-array-16-416.d, ld-tic6x/attr-array-16-48.d,
ld-tic6x/attr-array-16-8.d, ld-tic6x/attr-array-16-816.d,
ld-tic6x/attr-array-16.s, ld-tic6x/attr-array-4-16.d,
ld-tic6x/attr-array-4-4.d, ld-tic6x/attr-array-4-416.d,
ld-tic6x/attr-array-4-48.d, ld-tic6x/attr-array-4-8.d,
ld-tic6x/attr-array-4-816.d, ld-tic6x/attr-array-4.s,
ld-tic6x/attr-array-416-16.d, ld-tic6x/attr-array-416-4.d,
ld-tic6x/attr-array-416-416.d, ld-tic6x/attr-array-416-48.d,
ld-tic6x/attr-array-416-8.d, ld-tic6x/attr-array-416-816.d,
ld-tic6x/attr-array-416.s, ld-tic6x/attr-array-48-16.d,
ld-tic6x/attr-array-48-4.d, ld-tic6x/attr-array-48-416.d,
ld-tic6x/attr-array-48-48.d, ld-tic6x/attr-array-48-8.d,
ld-tic6x/attr-array-48-816.d, ld-tic6x/attr-array-48.s,
ld-tic6x/attr-array-8-16.d, ld-tic6x/attr-array-8-4.d,
ld-tic6x/attr-array-8-416.d, ld-tic6x/attr-array-8-48.d,
ld-tic6x/attr-array-8-8.d, ld-tic6x/attr-array-8-816.d,
ld-tic6x/attr-array-8.s, ld-tic6x/attr-array-816-16.d,
ld-tic6x/attr-array-816-4.d, ld-tic6x/attr-array-816-416.d,
ld-tic6x/attr-array-816-48.d, ld-tic6x/attr-array-816-8.d,
ld-tic6x/attr-array-816-816.d, ld-tic6x/attr-array-816.s,
ld-tic6x/attr-conformance-10-10.d,
ld-tic6x/attr-conformance-10-11.d,
ld-tic6x/attr-conformance-10-none.d,
ld-tic6x/attr-conformance-10.s, ld-tic6x/attr-conformance-11-10.d,
ld-tic6x/attr-conformance-11-11.d,
ld-tic6x/attr-conformance-11-none.d,
ld-tic6x/attr-conformance-11.s,
ld-tic6x/attr-conformance-none-10.d,
ld-tic6x/attr-conformance-none-11.d,
ld-tic6x/attr-conformance-none-none.d,
ld-tic6x/attr-conformance-none.s, ld-tic6x/attr-pic-0.s,
ld-tic6x/attr-pic-00.d, ld-tic6x/attr-pic-01.d,
ld-tic6x/attr-pic-1.s, ld-tic6x/attr-pic-10.d,
ld-tic6x/attr-pic-11.d, ld-tic6x/attr-pid-0.s,
ld-tic6x/attr-pid-00.d, ld-tic6x/attr-pid-01.d,
ld-tic6x/attr-pid-02.d, ld-tic6x/attr-pid-1.s,
ld-tic6x/attr-pid-10.d, ld-tic6x/attr-pid-11.d,
ld-tic6x/attr-pid-12.d, ld-tic6x/attr-pid-2.s,
ld-tic6x/attr-pid-20.d, ld-tic6x/attr-pid-21.d,
ld-tic6x/attr-pid-22.d, ld-tic6x/attr-stack-16-16.d,
ld-tic6x/attr-stack-16-8.d, ld-tic6x/attr-stack-16-816.d,
ld-tic6x/attr-stack-16.s, ld-tic6x/attr-stack-8-16.d,
ld-tic6x/attr-stack-8-8.d, ld-tic6x/attr-stack-8-816.d,
ld-tic6x/attr-stack-8.s, ld-tic6x/attr-stack-816-16.d,
ld-tic6x/attr-stack-816-8.d, ld-tic6x/attr-stack-816-816.d,
ld-tic6x/attr-stack-816.s, ld-tic6x/attr-wchar-0.s,
ld-tic6x/attr-wchar-00.d, ld-tic6x/attr-wchar-01.d,
ld-tic6x/attr-wchar-02.d, ld-tic6x/attr-wchar-1.s,
ld-tic6x/attr-wchar-10.d, ld-tic6x/attr-wchar-11.d,
ld-tic6x/attr-wchar-12.d, ld-tic6x/attr-wchar-2.s,
ld-tic6x/attr-wchar-20.d, ld-tic6x/attr-wchar-21.d,
ld-tic6x/attr-wchar-22.d: New tests.
2010-11-02 14:36:39 +00:00
34734a010b
Include compressed DWARF debug sections in ELF linker scripts.
...
binutils/testsuite/
2010-11-02 H.J. Lu <hongjiu.lu@intel.com>
* binutils-all/libdw2.out: Also accept MIPS_DWARF.
ld/
2010-11-02 H.J. Lu <hongjiu.lu@intel.com>
* scripttempl/armbpabi.sc: Include compressed DWARF debug
sections.
* scripttempl/avr.sc: Likewise.
* scripttempl/elf32cr16.sc: Likewise.
* scripttempl/elf32crx.sc: Likewise.
* scripttempl/elf32msp430.sc: Likewise.
* scripttempl/elf32msp430_3.sc: Likewise.
* scripttempl/elf32sh-symbian.sc: Likewise.
* scripttempl/elf64hppa.sc: Likewise.
* scripttempl/elf_chaos.sc: Likewise.
* scripttempl/elfd10v.sc: Likewise.
* scripttempl/elfd30v.sc: Likewise.
* scripttempl/elfi370.sc: Likewise.
* scripttempl/elfm68hc11.sc: Likewise.
* scripttempl/elfm68hc12.sc: Likewise.
* scripttempl/elfxtensa.sc: Likewise.
* scripttempl/ip2k.sc: Likewise.
* scripttempl/iq2000.sc: Likewise.
* scripttempl/mep.sc: Likewise.
* scripttempl/mmo.sc: Likewise.
* scripttempl/v850.sc: Likewise.
* scripttempl/xstormy16.sc: Likewise.
ld/testsuite/
2010-11-02 H.J. Lu <hongjiu.lu@intel.com>
* ld-elf/compress1a.d: Also check MIPS_DWARF.
* ld-elf/compress1b.d: Likewise.
* ld-elf/compress1c.d: Likewise.
2010-11-02 13:47:44 +00:00
290c52bdbb
2010-10-30 Kai Tietz <kai.tietz@onevision.com>
...
* dlltool.c (scan_drectve_symbols): Allow quoted strings for -export
directives.
2010-10-30 17:14:02 +00:00
3cbd1c0665
bfd:
...
* elf32-tic6x.c (elf32_tic6x_obj_attrs_arg_type): Check
Tag_ABI_compatibility not Tag_compatibility.
(elf32_tic6x_merge_attributes): Update compatibility attribute
name in comment. Return FALSE if merging common attributes fails.
binutils:
* readelf.c (display_tic6x_attribute): Use Tag_ABI_compatibility
not hardcoded 32. Display name of this attribute.
gas:
* doc/c-tic6x.texi (TIC6X Directives): Mention
Tag_ABI_compatibility.
gas/testsuite:
* gas/tic6x/attr-compatibility-directive-1.d,
gas/tic6x/attr-compatibility-directive-1.s,
gas/tic6x/attr-compatibility-directive-2.d,
gas/tic6x/attr-compatibility-directive-2.s: New tests.
include/elf:
* tic6x-attrs.h (Tag_ABI_compatibility): Define.
ld/testsuite:
* ld-tic6x/attr-compatibility-gnu-gnu.d,
ld-tic6x/attr-compatibility-gnu-other.d,
ld-tic6x/attr-compatibility-gnu.s,
ld-tic6x/attr-compatibility-other-gnu.d,
ld-tic6x/attr-compatibility-other-other.d,
ld-tic6x/attr-compatibility-other.s: New tests.
2010-10-29 16:47:55 +00:00
4a114e3e0c
Add compressed debug section support to binutils and ld.
...
bfd/
2010-10-29 H.J. Lu <hongjiu.lu@intel.com>
Cary Coutant <ccoutant@google.com>
* archive.c (bfd_openr_next_archived_file): Copy BFD_COMPRESS
and BFD_DECOMPRESS.
* bfd.c (BFD_COMPRESS): New.
(BFD_DECOMPRESS): Likewise.
(BFD_FLAGS_SAVED): Likewise.
(bfd_preserve_save): Replace BFD_IN_MEMORY with BFD_FLAGS_SAVED.
* compress.c (bfd_uncompress_section_contents): Removed.
(get_uncompressed_size): New.
(decompress_contents): Likewise.
(bfd_compress_section_contents): Likewise.
(bfd_get_full_section_contents): Likewise.
(bfd_is_section_compressed): Likewise.
(bfd_init_section_decompress_status): Likewise.
(bfd_init_section_compress_status): Likewise.
* dwarf2.c (dwarf_debug_sections): New.
(dwarf_debug_section_enum): Likewise.
(read_section): Remove section_name and compressed_section_name.
Add dwarf_debug_section_enum. Try compressed debug section.
(read_indirect_string): Updated.
(read_abbrevs): Likewise.
(decode_line_info): Likewise.
(read_debug_ranges): Likewise.
(find_line): Updated.
* ecoff.c (bfd_debug_section): Add compress_status and
compressed_size.
* elf.c (_bfd_elf_make_section_from_shdr): Call
bfd_is_section_compressed to check if a DWARF debug section is
compressed. Call bfd_init_section_compress_status or
bfd_init_section_decompress_status if needed.
* elflink.c (elf_link_input_bfd): Replace bfd_get_section_contents
with bfd_get_full_section_contents.
* merge.c (_bfd_add_merge_section): Likewise.
* reloc.c (bfd_generic_get_relocated_section_contents): Likewise.
* simple.c (bfd_simple_get_relocated_section_contents): Likewise.
* elfxx-target.h (TARGET_BIG_SYM): Allow BFD_COMPRESS and
BFD_DECOMPRESS.
(TARGET_LITTLE_SYM): Likewise.
* libbfd-in.h (dwarf_debug_section): New.
(dwarf_debug_sections): Likewise.
* libbfd.c (_bfd_generic_get_section_contents): Issue an error
when getting contents on compressed/decompressed section.
* section.c (COMPRESS_SECTION_NONE): New.
(COMPRESS_SECTION_DONE): Likewise.
(DECOMPRESS_SECTION_SIZED): Likewise.
(BFD_FAKE_SECTION): Add compress_status and compressed_size.
(bfd_malloc_and_get_section): Replace bfd_get_section_contents
with bfd_get_full_section_contents.
* bfd-in2.h: Regenerated.
* libbfd.h: Likewise.
binutils/
2010-10-29 H.J. Lu <hongjiu.lu@intel.com>
* addr2line.c (process_file): Set BFD_DECOMPRESS.
* objcopy.c (do_debug_sections): New.
(OPTION_COMPRESS_DEBUG_SECTIONS): New.
(OPTION_DECOMPRESS_DEBUG_SECTIONS): Likewise.
(copy_options): Add OPTION_COMPRESS_DEBUG_SECTIONS and
OPTION_DECOMPRESS_DEBUG_SECTIONS.
(copy_usage): Add --compress-debug-sections and
--decompress-debug-sections.
(copy_file): Set BFD_COMPRESS or BFD_DECOMPRESS.
(copy_section): Replace bfd_get_section_contents with
bfd_get_full_section_contents.
(copy_main): Handle OPTION_COMPRESS_DEBUG_SECTIONS and
OPTION_DECOMPRESS_DEBUG_SECTIONS. Check do_debug_sections to
rename DWARF debug sections.
* objdump.c (load_specific_debug_section): Replace
bfd_get_section_contents with bfd_get_full_section_contents.
Remove bfd_uncompress_section_contents.
(dump_section): Replace bfd_get_section_contents with
bfd_get_full_section_contents.
(display_file): Set BFD_DECOMPRESS if needed.
* readelf.c (uncompress_section_contents): Set buffer to NULL
to indiate decompression failure.
(load_specific_debug_section): Always call
uncompress_section_contents.
* doc/binutils.texi: Document --compress-debug-sections and
--decompress-debug-sections.
binutils/testsuite/
2010-10-29 H.J. Lu <hongjiu.lu@intel.com>
* binutils-all/compress.exp: New.
* binutils-all/dw2-1.S: Likewise.
* binutils-all/dw2-2.S: Likewise.
* binutils-all/libdw2-compressed.out: Likewise.
* binutils-all/libdw2.out: Likewise.
gas/
2010-10-29 H.J. Lu <hongjiu.lu@intel.com>
* write.c (compress_debug): Optimize section flags check.
gas/testsuite/
2010-10-29 H.J. Lu <hongjiu.lu@intel.com>
* elf/dwarf2-1.s: Replace .zdebug_abbrev section with
.debug_abbrev section.
* elf/dwarf2-2.3: Likewise.
* elf/dwarf2-1.d: Pass --compress-debug-sections to assembler.
Updated.
* elf/dwarf2-2.d: Likewise.
* gas/i386/i386.exp: Remove xfail on dw2-compress-2 and
x86-64-dw2-compress-2.
ld/
2010-10-29 H.J. Lu <hongjiu.lu@intel.com>
* ldfile.c (ldfile_try_open_bfd): Set BFD_DECOMPRESS after
bfd_openr returns.
* emultempl/elf32.em (gld${EMULATION_NAME}_try_needed): Likewise.
* scripttempl/elf.sc: Include compressed DWARF debug sections.
ld/testsuite/
2010-10-29 H.J. Lu <hongjiu.lu@intel.com>
* ld-elf/compress.exp: New.
* ld-elf/compress1.s: Likewise.
* ld-elf/compress1a.d: Likewise.
* ld-elf/compress1b.d: Likewise.
* ld-elf/compress1c.d: Likewise.
2010-10-29 12:10:39 +00:00
e58bcb8f09
PR binutils/12058
...
* ar.c (usage): Revert previous change. Describe how 's' can be
used as a command letter.
* doc/binutils.texi (ar cmdline): Describe how 's' can be used as
a command letter.
2010-10-29 08:47:02 +00:00
b559362370
bfd:
...
2010-10-29 Bernd Schmidt <bernds@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* elf32-tic6x.c (elf32_tic6x_merge_attributes): Check for mismatch
of DSBT attributes.
binutils:
2010-10-29 Bernd Schmidt <bernds@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* readelf.c (display_tic6x_attribute): Handle Tag_ABI_DSBT.
gas:
2010-10-29 Bernd Schmidt <bernds@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* config/tc-tic6x.c (OPTION_MDSBT, OPTION_MNO_DSBT): New enum
values.
(md_longopts): Add mdsbt and mno-dsbt.
(tic6x_dsbt): New static variable.
(md_parse_option): Handle OPTION_MDSBT and OPTION_MNO_DSBT.
(md_show_usage): Output help text for -mdsbt and -mno-dsbt.
(TAG): Add comma at the end.
(tic6x_set_attributes): Set Tag_ABI_DSBT.
* doc/as.texinfo: Document -mdsbt and -mno-dsbt.
* doc/c-tic6x.texi (TIC6X Options): Likewise.
(TIC6X Directives): Mention Tag_ABI_DSBT.
gas/testsuite:
2010-10-29 Bernd Schmidt <bernds@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* gas/tic6x/attr-dsbt-directive-1.d,
gas/tic6x/attr-dsbt-directive-1.s,
gas/tic6x/attr-dsbt-directive-2.d,
gas/tic6x/attr-dsbt-directive-2.s,
gas/tic6x/attr-dsbt-opts-mdsbt.d,
gas/tic6x/attr-dsbt-opts-mno-dsbt.d: New tests.
include/elf:
2010-10-29 Bernd Schmidt <bernds@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* tic6x-attrs.h (Tag_ABI_DSBT): New.
ld/testsuite:
2010-10-29 Bernd Schmidt <bernds@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* ld-tic6x/attr-dsbt-0.s, ld-tic6x/attr-dsbt-00.d,
ld-tic6x/attr-dsbt-01.d, ld-tic6x/attr-dsbt-1.s,
ld-tic6x/attr-dsbt-10.d, ld-tic6x/attr-dsbt-11.d: New tests.
2010-10-29 00:15:59 +00:00
3a728a9c27
PR binutils/12058
...
* ar.c (usage): Remove spurious 's' from list of accepted command
letters.
2010-10-28 14:11:29 +00:00
137b6b5f5e
* readelf.c (is_32bit_abs_reloc): Support i960 and microblaze.
...
(is_32bit_pcrel_reloc): Support microblaze.
2010-10-28 06:00:13 +00:00
Nick Clifton
Alan Modra
James Lemke
H.J. Lu
Cary Coutant
Jakub Jelinek
Sean Keys
Tom Tromey
Roland McGrath
Hans-Peter Nilsson
Walter Lee
Kai Tietz
Tristan Gingold
Ian Lance Taylor
David Daney
Andreas Schwab
DJ Delorie
Joern Rennecke
Mike Frysinger
Jan Kratochvil
Carlos O'Donell
Matthew Gretton-Dann
David S. Miller
Richard Sandiford
Thomas Schwinge
Bernd Schmidt
Ulrich Weigand
Daniel Jacobowitz
Jie Zhang
Paul Brook
Joseph Myers
Sterling Augustine
Catherine Moore
Pierre Muller
Michael Snyder
Ralf Wildenhues
Maciej W. Rozycki
Dave Anglin
Doug Evans