Somewhat simplify "sub" instructions.
Correctly sign extend operands for "mul". Put the correct
half of the result in MDR for "mul" and "mulu".
Implement remaining instructions.
Tweak opcode for "syscall".
* Make-common.in (CSEARCH): Do not include the gdb directory in
the search path.
* Make-common.in (SIM_ENDIAN, SIM_HOSTENDIAN, SIM_INLINE,
SIM_WARNING): Drop, requiring the simulator specific Makefile.in
to explicitly incorporate these.
* aclocal.m4 (--enable-sim-alignment); New option. Strongly
specify the alignment restrictions of the target architecture -
without this option all alignment restrictions are accomodated.
(--enable-sim-assert): New option. Conditionally compile in
assertion statements.
(--enable-sim-float): New option. Strongly specify the target's
floating point support.
(--enable-sim-hardware): New option. Specify the hardware devices
included in the simulation.
(--enable-sim-packages): New option. Specify the hardware
packages included in the simulation.
(--enable-sim-regparm): New option. Specify that parameters be
passed in registers instead of on the stack.
(--enable-sim-reserved-bits): New option. Specify that reserved
bits within an instruction are are correctly set.
(--enable-sim-smp): New option. Specify the level of SMP support
to be included in the simulator.
(--enable-sim-stdcall): New option. Specify an alternative
function call convention.
(--enable-sim-xor-endian): New option. Configure xor-endian
support used by some targets to implement bi-endian support.
(main): New locals sd,no_args,sim_argv.
Run buildargv on -a option. Pass argv to sim_open, argv[0]
is program name. Update call to sim_set_callbacks.
Record result of sim_open, pass to other sim_foo routines.
(SignalException): Pass floating point cases to mips16_entry.
(ValueFPR): Don't restrict fmt_single and fmt_word to even
registers.
(StoreFPR): Likewise. Also, don't clobber fpr + 1 for fmt_single
or fmt_word.
(COP_LW): Pass fmt_word rather than fmt_uninterpreted to StoreFPR,
and then set the state to fmt_uninterpreted.
(COP_SW): Temporarily set the state to fmt_word while calling
ValueFPR.
scheme which is more compatible with WinGDB builds.
* configure.in: Improve comment on how to run autoconf.
* configure: Re-run autoconf to get new ../common/aclocal.m4.
* Makefile.in: Use autoconf substitution to install common
makefile fragment.
into here. Makes insertion into makefiles easier. Also, change
the way that callback.o, gentmap, targ-vals.h, targ-map.c,
targ-map.o, and run are built. They are now built in the
individual simulator directories, taking sources from ../common as
necessary. This replaces the merging of libcommon.a into
linsim.a, which was problematic for the WinGDB build process.
* run.c: Include config.h from . instead of ../common.
* Make-common.in: Remove. It's no longer necessary.
array to make gdb implementation easier.
(REG_*): Add definitions for all registers in the state array.
(SEXT32, SEXT40, SEXT44, SEXT60): Remove unused macros.
* simops.c: Related changes.
(mips16_entry): New static function.
(SignalException): Look for mips16 entry and exit instructions.
(simulate): Use the correct index when setting fpr_state after
doing a pending move.
force a 64 bit multiplication.
(build_instruction) [OR]: In mips16 mode, don't do anything if the
destination register is 0, since that is the default mips16 nop
instruction.
(build_endian_shift): Don't check proc64.
(build_instruction): Always set memval to uword64. Cast op2 to
uword64 when shifting it left in memory instructions. Always use
the same code for stores--don't special case proc64.
relative operands.
(build_instruction): Call JALDELAYSLOT rather than DELAYSLOT for a
jal instruction.
* interp.c (simJALDELAYSLOT): Define.
(JALDELAYSLOT): Define.
(INDELAYSLOT, INJALDELAYSLOT): Define.
(simulate): Clear simJALDELAYSLOT when simDELAYSLOT is cleared.
* gencode.c (build_instruction, case JUMP): Truncate PC to 32 bits.
* interp.c (CHECKHILO): Define away.
(simSIGINT): New macro.
(membank_size): Increase from 1MB to 2MB.
(control_c): New function.
(sim_resume): Rename parameter signal to signal_number. Add local
variable prev. Call signal before and after simulate.
(sim_stop_reason): Add simSIGINT support.
(sim_warning, sim_error, dotrace, SignalException): Define as stdarg
functions always.
(sim_warning): Delete call to SignalException. Do call printf_filtered
if logfh is NULL.
(AddressTranslation): Add #ifdef DEBUG around debugging message and
a call to sim_warning.
to the OP_* declarations.
(write_template): Similarly for function templates.
* interp.c (insn, extension): Remove global variables. Instead
pass them as arguments to the OP_* functions.
* mn10300_sim.h: Remove decls for "insn" and "extension".
* simops.c (OP_*): Accept "insn" and "extension" as arguments
instead of using globals.
Starting to clean things up.
* Makefile.in: Only link in -ltermcap if it exists.
* erc32.c: Update to version 2.6a. Fix uart handling.
* exec.c: Update to version 2.6a. Add sparclite support.
* float.c: Update to version 2.6a. Convert comments to
preprocessor warnings. Add __setfpucw() for i385 hosts so floating
point exceptions work.
* func.c: Update to version 2.6a. Fix uart handling, add support
for user error traps.
* help.c: Update to version 2.6a. Add help note on user error
traps.
* interf.c: Update to version 2.6a. Fix uart handling, and add
sparclite support.
* examples/gccx: Use sparclite cross compiler, not native gcc.
* examples/srt0.S: Use "mov" rather than "wr" for manipulating
the psr register.
(REG_MDR): Define.
* simops.c: Implement "cmp", "calls", "rets", "jmp" and
a few additional random insns.
We can now function calls. We get out of crt0 into main now, then lose
when calls are nested (because don't handle movm yet).
(REG_D0, REG_A0, REG_SP): Define.
* simops.c: Implement "add", "addc" and a few other random
instructions.
Starting to simulate instructions for the mn10300. Executes some of
the crt0 code now!
* gencode.c (inst_type): Add mips16 instruction encoding types.
(GETDATASIZEINSN): Define.
(MIPS_DECODE): Add REG flag to dsllv, dsrav, and dsrlv. Add
jalx. Add LEFT flag to mfhi and mflo. Add RIGHT flag to mthi and
mtlo.
(MIPS16_DECODE): New table, for mips16 instructions.
(bitmap_val): New static function.
(struct mips16_op): Define.
(mips16_op_table): New table, for mips16 operands.
(build_mips16_operands): New static function.
(process_instructions): If PC is odd, decode a mips16
instruction. Break out instruction handling into new
build_instruction function.
(build_instruction): New static function, broken out of
process_instructions. Check modifiers rather than flags for SHIFT
bit count and m[ft]{hi,lo} direction.
(usage): Pass program name to fprintf.
(main): Remove unused variable this_option_optind. Change
``*loptarg++'' to ``loptarg++''.
(my_strtoul): Parenthesize && within ||.
* interp.c (sim_trace): If tracefh is NULL, set it to stderr.
(LoadMemory): Accept a halfword pAddr if vAddr is odd.
(simulate): If PC is odd, fetch a 16 bit instruction, and
increment PC by 2 rather than 4.
* configure.in: Add case for mips16*-*-*.
* configure: Rebuild.
(SIM_OBJS): Define.
* configure.in: Simplify using macros in ../common/aclocal.m4.
* configure: Regenerated.
* inst.h (enum sim_state): Define.
(cpu_state_type): New member `state'. Set it whenever `exception'
is set.
* compile.c (sim_callback): New global.
(sim_set_simcache_size): Renamed from sim_csize.
(sim_resume, case O_SLEEP): Add right way to decode r0 but #if 0 out
'cus it can't work. Change main loop exit test to use cpu.state.
(sim_trace): New function.
(sim_stop_reason): Add right way to set results, but #if 0 out.
(sim_size): New function.
(sim_info): Redirect calls to printf_filtered through callback.
(sim_set_callbacks): Record callback.
* run.c: Deleted, using one in ../common now.
* tconfig.in: New file.
(SIM_{OBJS,EXTRA_LIBS,EXTRA_LIBDEPS,EXTRA_ALL,EXTRA_INSTALL}): Define.
(SIM_{EXTRA_CLEAN,EXTRA_CFLAGS}): Define.
* configure.in: Simplify using macros in ../common/aclocal.m4.
Call AC_CHECK_HEADERS(stdlib.h).
* configure: Regenerated.
* config.in: New file.
* func.c (sim_set_callbacks): Delete, moved to
* interf.c (sim_set_callbacks): here.
(sim_callback): New global.
Rewrite all calls to printf_filtered to go through callback.
(sim_size,sim_trace): New functions.
(sim_{insert,remove}_breakpoint): #if 0 out.
* sis.c: #include "config.h". #include <stdlib.h> if present.
(main): Coerce fprintf arg to INIT_DISASSEMBLE_INFO to fprintf_ftype.
* sis.h: #include "callback.h".
(myname): New static global.
(main): Recognize new options -a, -c. Also recognize -h if h8/300.
Only process -c ifdef SIM_HAVE_SIMCACHE.
Only process -p/-s ifdef SIM_HAVE_PROFILE.
Parse program name from argv[0] and use in error messages.
Pass sim_args to sim_open. Pass prog_args to sim_create_inferior.
Add support for incomplete h8/300 termination indicators.
(usage): Make more verbose.
* aclocal.m4,config.in,tconfig.in,configure.in,configure: New files.
* Makefile.in,Make-common.in,callback.c: New files.
* nltvals.def,gentmap.c,gentvals.sh: New files.
* Makefile.in: Delete everything that's been moved to
../common/Make-common.in.
(SIM_OBJS): Define.
* configure.in: Simplify using macros in ../common/aclocal.m4.
* configure: Regenerated.
* config.in: New file.
* armos.c: #include config.h.
* wrapper.c (mem_size): Value is in bytes now.
(sim_callback): New global.
(arm_sim_set_profile{,_size}): Delete.
(arm_sim_set_mem_size): Rename to sim_size.
(sim_do_command): Call printf_filtered via callback.
(sim_set_callbacks): Record callback.
* d10v-sim.h (simops): Add flag is_long.
(State): Add pc_changed. Instructions which update the PC should
use the JMP macro which sets this.
(JMP): New macro. Sets the PC and the pc_changed flag.
* gencode.c (write_opcodes): Add is_long field.
* interp.c (lookup_hash): If we blindly apply a short opcode's mask
to a long opcode we could get a false match. Check the opcode size.
(hash): Add a size field to the hash table.
(sim_open): Initialize size field in hash table.
(sim_resume): Change to logic for setting the PC. Used to increment the
PC if it had not been changed. This didn't allow single-instruction loops.
Now checks the flag State.pc_changed. Also now stops when ^C is received.
(dmem_addr): Fix translation of data segments to unified memory.
(sim_ctrl_c): New function. When ^C is received, set stop_simulator flag.
* simops.c: Changed all branch and jump instructions to use new JMP macro.
(OP_20000000): Corrected trace information to show this is a ldi.l, not
a ldi.s instruction.
* interp.c (sim_size): Now allocates unified memory for imap segments
0,1,2, and 127. Initializes imap0 and imap1 to 0x1000. Initializes dmap to 0.
(sim_write): Just call xfer_mem().
(sim_read): Just call xfer_mem().
(xfer_mem): New function. Does appropriate memory mapping and copies bytes.
(dmem_addr): New function. Reads dmap register and translates data
addresses to local addresses.
(pc_addr): New function. Reads imap register and computes local address
corresponding to contents of the PC.
(sim_resume): Change to use pc_addr().
(sim_create_inferior): Change reinitialization code. Also reinitializes
imap[01] and dmap.
(sim_fetch_register): Add fake registers 32,33,34 for imap0, imap1, and dmap.
(sim_store_register): Add fake registers 32,33,34 for imap0, imap1, and dmap.
* simops.c (MEMPTR): Redefine to use dmem_addr().
(OP_5F00): Replace references to STate.imem with dmem_addr().
* d10v-sim.h (State): Remove mem_min and mem_max. Add umem[128].
(RB,SW,RW,SLW,RLW): Redefine to use dmem_addr().
(IMAP0,IMAP1,DMAP,SET_IMAP,SET_IMAP1,SET_DMAP): Define.
(OP_300, OP_400, OP_500, OP_380, OP_480, OP_501): Displacement
is zero extended for sst/sld instructions.
* v850_sim.h (SEX7): Delete. It's no longer needed (and it
was incorrect anyway).
So we properly simulate sst/sld instructions.
autoconf.
* gencode.c (write_opcodes): Pad operands field to account for
MSVC braindamage.
* simops.c: Include errno.h. Exclude SYS_chown, since MSVC
doesn't support it. (Why is this here in the first place?!?)
* v850_sim.h: Get rid of 64 bit defs. Also, get rid of #elif's.
Change number of operands in struct simops from 9 to 6. Define
SIGTRAP and SIGQUIT for MSVC.
* (map): Add support for external mem in the 1->2 meg range.
Also, abort() when memory access is way out of bounds. (Better to
die than to give wrong result. (This will be fixed later.))
* (sim_size): MEM_SIZE is now bytes, not shift factor.
and patterns.
* interp.c (sim_resume): Save and restore PC from the appropriate
register.
* (sim_fetch_register sim_store_register): Fix byte-order problem
with reading and writing registers.
* simops.c (OP_FFFF): Implement pseudo-breakpoint insn.
* interp.c (SignalException): Check for explicit terminating
breakpoint value.
* gencode.c: Pass instruction value through SignalException()
calls for Trap, Breakpoint and Syscall.
* interp.c (SquareRoot): Add HAVE_SQRT check to ensure sqrt() is
only used on those hosts that provide it.
* configure.in: Add sqrt() to list of functions to be checked for.
* config.in: Re-generated.
* configure: Re-generated.
expanding STORE RIGHT, to fix swr.
* support.h (SIGNEXTEND): If the sign bit is not set, explicitly
clear the high bits.
* interp.c (Convert): Fix fmt_single to fmt_long to not truncate.
Fix float to int conversions to produce signed values.
* run.c (main): Explicitly cast malloc() parameter.
This is needed because for certain builds the size field being given
to malloc() is actually 64bits long, and without a cast or malloc
prototype the resulting value used by malloc() depended on the host
endianness, and how long long paramaters are passed into functions.
* interp.c (sim_monitor): Improved monitor printf
simulation. Tidied up simulator warnings, and added "--log" option
for directing warning message output.
* gencode.c: Use sim_warning() rather than WARNING macro.
David Edelsohn
Ian Lance Taylor
Andrew Cagney
Jeff Law
Gavin Romig-Koch
Michael Meissner
Jim Wilson
Angela Marie Thomas
Dawn Perchik
Mark Alexander
Stu Grossman
Rob Savoye
Martin Hunt
Jason Molenda
Jackie Smith Cashion