The new options are:
+aes: Enables the AES instructions of Armv8-a,
enabled by default with +crypto.
+sha2: Enables the SHA1 and SHA2 instructions of Armv8-a,
enabled by default with +crypto.
These options have been turned on by default when +crypto
is used, as such no breakage is expected.
The reason for the split is because with the introduction of Armv8.4-a
the implementation of AES has explicitly been made independent of the
implementation of the other crypto extensions. Backporting the split does
not break any of the previous requirements and so is safe to do.
gas * config/tc-aarch64.c
(aarch64_features): Include AES and SHA2 in CRYPTO.
Add SHA2 and AES.
include * opcode/aarch64.h:
(AARCH64_FEATURE_SHA2, AARCH64_FEATURE_AES): New.
opcodes * aarch64-tbl.h (aarch64_feature_crypto): Add AES and SHA2.
(aarch64_feature_sha2, aarch64_feature_aes): New.
(SHA2, AES): New.
(AES_INSN, SHA2_INSN): New.
(pmull, pmull2, aese, aesd, aesmc, aesimc): Change to AES_INS.
(sha1h, sha1su1, sha256su0, sha1c, sha1p,
sha1m, sha1su0, sha256h, sha256h2, sha256su1):
Change to SHA2_INS.
gas * config/tc-arm.c (arm_extensions):
(arm_archs): New entry for "armv8.4-a".
Add FPU_ARCH_DOTPROD_NEON_VFP_ARMV8.
(arm_ext_v8_2): New variable.
(enum arm_reg_type): New enumeration REG_TYPE_NSD.
(reg_expected_msgs): New entry for REG_TYPE_NSD.
(parse_typed_reg_or_scalar): Handle REG_TYPE_NSD.
(parse_scalar): Support REG_TYPE_VFS.
(enum operand_parse_code): New enumerations OP_RNSD and OP_RNSD_RNSC.
(parse_operands): Handle OP_RNSD and OP_RNSD_RNSC.
(NEON_SHAPE_DEF): New entries for DHH and DHS.
(neon_scalar_for_fmac_fp16_long): New function to generate Rm encoding
for new FP16 instructions in ARMv8.2-A.
(do_neon_fmac_maybe_scalar_long): New function to encode new FP16
instructions in ARMv8.2-A.
(do_neon_vfmal): Wrapper function for vfmal.
(do_neon_vfmsl): Wrapper function for vfmsl.
(insns): New entries for vfmal and vfmsl.
* doc/c-arm.texi (-march): Document "armv8.4-a".
* testsuite/gas/arm/dotprod-mandatory.d: New test.
* testsuite/gas/arm/armv8_2-a-fp16.s: New test source.
* testsuite/gas/arm/armv8_2-a-fp16-illegal.s: New test source.
* testsuite/gas/arm/armv8_2-a-fp16.d: New test.
* testsuite/gas/arm/armv8_3-a-fp16.d: New test.
* testsuite/gas/arm/armv8_4-a-fp16.d: New test.
* testsuite/gas/arm/armv8_2-a-fp16-thumb2.d: New test.
* testsuite/gas/arm/armv8_2-a-fp16-illegal.d: New test.
* testsuite/gas/arm/armv8_2-a-fp16-illegal.l: New error file.
opcodes * arm-dis.c (coprocessor_opcodes): New entries for ARMv8.2-A new
FP16 instructions, including vfmal.f16 and vfmsl.f16.
include * opcode/arm.h (ARM_AEXT2_V8_4A): Include Dot Product feature.
(ARM_EXT2_V8_4A): New macro.
(ARM_AEXT2_V8_4A): Likewise.
(ARM_ARCH_V8_4A): Likewise.
A small number of NPS400 instruction incorrectly used NONE as an
insn_class_t, which would trigger a build warning. Fixed by changing to
MISC.
opcodes/ChangeLog:
* arc-nps400-tbl.h: Change incorrect use of NONE to MISC.
binutils has lacked proper pluralization of output messages for a long
time, for example, readelf will display information about a section
that "contains 1 entries" or "There are 1 section headers". Fixing
this properly requires us to use ngettext, because other languages
have different rules to English.
This patch defines macros for ngettext and friends to handle builds
with --disable-nls, and tidies the existing nls support. I've
redefined gettext rather than just defining "_" as dgettext in bfd and
opcodes in case someone wants to use gettext there (which might
conceivably happen with generated code).
bfd/
* sysdep.h: Formatting, comment fixes.
(gettext, ngettext): Redefine when ENABLE_NLS.
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
(_): Define using gettext.
(textdomain, bindtextdomain): Use safer "do nothing".
* hosts/alphavms.h (textdomain, bindtextdomain): Likewise.
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
opcodes/
* opintl.h: Formatting, comment fixes.
(gettext, ngettext): Redefine when ENABLE_NLS.
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
(_): Define using gettext.
(textdomain, bindtextdomain): Use safer "do nothing".
binutils/
* sysdep.h (textdomain, bindtextdomain): Use safer "do nothing".
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
gas/
* asintl.h (textdomain, bindtextdomain): Use safer "do nothing".
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
gold/
* system.h (textdomain, bindtextdomain): Use safer "do nothing".
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
ld/
* ld.h (textdomain, bindtextdomain): Use safer "do nothing".
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
Force printing of the short/signed values using hexadecimal
representation via disassembler option.
opcode/
2017-11-03 Claudiu Zissulescu <claziss@synopsys.com>
* arc-dis.c (print_hex): New variable.
(parse_option): Check for hex option.
(print_insn_arc): Use hexadecimal representation for short
immediate values when requested.
(print_arc_disassembler_options): Add hex option to the list.
binutils/
2017-11-03 Claudiu Zissulescu <claziss@synopsys.com>
* doc/binutils.texi (ARC): Update disassembler options.
* testsuite/binutils-all/arc/hexprint.s: New file.
* testsuite/binutils-all/arc/objdump.exp: Test hex printing feature.
These are all invalid instructions, so they should not disassemble.
opcodes/ChangeLog
2017-10-24 Andrew Waterman <andrew@sifive.com>
* riscv-opc.c (match_c_addi16sp) : New function.
(match_c_addi4spn): New function.
(match_c_lui): Don't allow 0-immediate encodings.
(riscv_opcodes) <addi>: Use the above functions.
<add>: Likewise.
<c.addi4spn>: Likewise.
<c.addi16sp>: Likewise.
gas/ChangeLog
2017-10-24 Andrew Waterman <andrew@sifive.com>
* testsuite/gas/riscv/c-addi16sp-fail.d: New test.
testsuite/gas/riscv/c-addi16sp-fail.l: Likewise.
testsuite/gas/riscv/c-addi16sp-fail.s: Likewise.
testsuite/gas/riscv/c-addi4spn-fail.d: Likewise.
testsuite/gas/riscv/c-addi4spn-fail.l: Likewise.
testsuite/gas/riscv/c-addi4spn-fail.s: Likewise.
testsuite/gas/riscv/riscv.exp: Add new tests.
FT32B is a new FT32 family member. It has a code
compression scheme, which requires the use of linker
relaxations. The change is quite large, so submission
is in several parts.
Part 1 adds a 15-bit instruction field, and CPU-specific functions for
the code compression that are used in binutils and GDB.
bfd/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elf32-ft32.c: Add HOWTO R_FT32_15.
* reloc.c: Add BFD_RELOC_FT32_15.
gas/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* config/tc-ft32.c (md_assemble): Replace FT32_FLD_K8 with
K15.
(md_apply_fix, tc_gen_reloc): Add BFD_RELOC_FT32_15.
include/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* elf/ft32.h: Add R_FT32_15.
* opcode/ft32.h: Replace FT32_FLD_K8 with K15.
(ft32_shortcode, sc_compar, ft32_split_shortcode,
ft32_merge_shortcode, ft32_merge_shortcode): New functions.
opcodes/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* opcodes/ft32-dis.c (print_insn_ft32): Replace FT32_FLD_K8 with K15.
* opcodes/ft32-opc.c (ft32_opc_info): Replace FT32_FLD_K8 with
K15. Add jmpix pattern.
sim/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* sim/ft32/interp.c (step_once): Replace FT32_FLD_K8 with K15.
prno, tpei, and irbm are missing in the optable.
gas/ChangeLog:
2017-10-09 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* testsuite/gas/s390/zarch-arch12.d (prno, tpei, irbm): New
instructions added.
* testsuite/gas/s390/zarch-arch12.s: Likewise.
* testsuite/gas/s390/zarch-z13.d: Rename ppno to prno.
opcodes/ChangeLog:
2017-10-09 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-opc.txt (prno, tpei, irbm): New instructions added.
The recent POP adjusted a few of the instruction formats. This patch
adjusts our optable accordingly. No user visible change - hopefully.
opcodes/ChangeLog:
2017-10-09 Heiko Carstens <heiko.carstens@de.ibm.com>
* s390-opc.c (INSTR_SI_RD): New macro.
(INSTR_S_RD): Adjust example instruction.
* s390-opc.txt (lpsw, ssm, ts): Change S_RD instruction format to
SI_RD.
opcodes/
* ppc-opc.c (vle_opcodes): Add e_lmvsprw, e_lmvgprw,
e_lmvsrrw, e_lmvcsrrw and e_lmvcsrrw as official mnemonics for
VLE multimple load/store instructions. Old e_ldm* variants are
kept as aliases.
Add missing e_lmvmcsrrw and e_stmvmcsrrw.
gas/
* testsuite/gas/ppc/vle-mult-ld-st-insns.s: New file: Tests the
support for the VLE multiple load/store instructions.
* testsuite/gas/ppc/vle-mult-ld-st-insns.d: New file: Test
driver.
* testsuite/gas/ppc/ppc.exp: Run it.
PR 22179
opcodes * riscv-opc.c (riscv_opcodes): Add fmv.x.w and fmv.w.x as the new
names for the fmv.x.s and fmv.s.x instructions respectively.
gas * testsuite/gas/riscv/fmv.x.s: New file: Tests the support for the
renamed fmv.x.s and fmv.s.x instructions.
* testsuite/gas/riscv/fmv.x.d: New file: Test driver.
From PR 22123:
The common opcodes of emac and mac seem to be only implemented for mac.
To reproduce:
echo "macw %d3l,%a0l" > /tmp/dummy.S
m68k-unknown-elf-as -m5208 /tmp/dummy.S
Outputs something like:
/tmp/dummy.S: Assembler messages:
/tmp/dummy.S:1: Error: operands mismatch -- statement `macw %d3l,%a0l' ignored
This behavior occurs only if the CPU supports only emac but not explicitly mac (but emac is a superset of mac).
Hi,
While compiling GDB using a mingw compiler from Fedora 26:
../gdb/configure --host=x86_64-w64-mingw32 --target=x86_64-w64-mingw32 \
--disable-binutils --disable-ld --disable-gold --disable-gas --disable-sim \
--disable-gprof --enable-targets=all
I stumbled upon a simple occurrence of -Werror=maybe-uninitialized:
../../gdb/opcodes/aarch64-opc.c: In function 'expand_fp_imm':
../../gdb/opcodes/aarch64-opc.c:2880:10: error: 'imm' may be used uninitialized in this function [-Werror=maybe-uninitialized]
return imm;
^~~
It is the compiler's fault, because this function always assigns to
'imm' if the necessary conditions are met, and it calls "assert (0)"
otherwise, but I thought it'd be clearer to have 'imm' explicitly set
to zero anyway.
opcodes/ChangeLog:
2017-09-21 Sergio Durigan Junior <sergiodj@redhat.com>
* aarch64-opc.c (expand_fp_imm): Initialize 'imm'.
Since the NOTRACK prefix is no longer required to be the last prefix
before the REX prefix, restriction on the NOTRACK prefix position is
removed from assembler as well as disassembler. Assembler encodes the
NOTRACK prefix the same way as the DS segment register, which places
it before other prefixes. Disassembler displays prefixes in the order
they appear.
gas/
* config/tc-i386.c (NOTRACK_PREFIX): Removed.
(REX_PREFIX): Updated.
(MAX_PREFIXES): Likewise.
(parse_insn): Remove restriction on NOTRACK prefix position.
* testsuite/gas/i386/notrack.s: Add tests with NOTRACK prefix
before other prefixes.
* testsuite/gas/i386/x86-64-notrack.s: Likewise.
* testsuite/gas/i386/notrackbad.s: Remove tests with NOTRACK
prefix before other prefixes.
* testsuite/gas/i386/x86-64-notrackbad.s: Likewise.
* testsuite/gas/i386/notrack-intel.d: Updated.
* testsuite/gas/i386/notrack.d: Likewise.
* testsuite/gas/i386/notrackbad.l: Likewise.
* testsuite/gas/i386/x86-64-notrack-intel.d: Likewise.
* testsuite/gas/i386/x86-64-notrack.d: Likewise.
* testsuite/gas/i386/x86-64-notrackbad.l: Likewise.
opcodes/
* i386-dis.c (last_active_prefix): Removed.
(ckprefix): Don't set last_active_prefix.
(NOTRACK_Fixup): Don't check last_active_prefix.
For opcode fields that are not addresses, display as
integers instead of using print_address_func.
opcodes/ChangeLog:
2017-08-31 James Bowman <james.bowman@ftdichip.com>
* ft32-dis.c (print_insn_ft32): Correct display of non-address
fields.
* ppc-opc.c: Formatting and comment fixes. Move insert and
extract functions earlier, deleting forward declarations.
(insert_nbi, insert_raq, insert_rbx): Expand use of RT_MASK and
RA_MASK.
This fixes "-M noaliases" disassembly for "c.nop", which is an alias for
"c.addi x0, 0".
opcodes/ChangeLog
2017-08-01 Palmer Dabbelt <palmer@dabbelt.com>
* riscv-opc.c (riscv_opcodes): Mark "c.nop" as an alias.
According to ARMv8-A architecture manual, REG_SP is allowed in CRC32
instructions in Thumb mode. It is REG_PC that will cause unpredictable
behaviours on both ARM and Thumb.
This patch removes the incorrect warning on Thumb mode.
Meanwhile the disassembler is updated to use format "<bitfield>R" instead of
"<bitfield>S". "<bitfield>S" is not used elsewhere. so I have deleted related
code from the disassembler.
gas/
* config/tc-arm.c (do_crc32_1): Remove warning on REG_SP for thumb_mode.
* testsuite/gas/arm/crc32-armv8-a-bad.d: Update exepcted result.
* testsuite/gas/arm/crc32-armv8-r-bad.d: Likewise.
* testsuite/gas/arm/crc32-armv8-a.d: Likewise.
* testsuite/gas/arm/crc32-armv8-r.d: Likewise.
* testsuite/gas/arm/crc32-armv8-ar-bad.s: Update test case.
* testsuite/gas/arm/crc32-armv8-ar.s: Likewise.
* testsuite/gas/arm/crc32-bad.l: Update expected error message.
opcode/
* arm-dis.c (thumb32_opcodes): Use format 'R' instead of 'S' for
register operands in CRC instructions.
(print_insn_thumb32): Remove "<bitfield>S" support. Updated the
comments.
Fix build on x86:
opcodes/disassemble.c: In function ‘disassembler’:
opcodes/disassemble.c:113:52: error: unused parameter ‘big’ [-Werror=unused-parameter]
disassembler (enum bfd_architecture a, bfd_boolean big, unsigned long mach,
^~~
opcodes/disassemble.c:113:71: error: unused parameter ‘mach’ [-Werror=unused-parameter]
disassembler (enum bfd_architecture a, bfd_boolean big, unsigned long mach,
^~~~
cc1: all warnings being treated as errors
* disassemble.c (disassembler): Mark big and mach with
ATTRIBUTE_UNUSED.
Fix `set architecture' and `set endian' command disassembly regressions
from commit 39503f8242 ("Delegate opcodes to select disassembler in
GDB"), and commit 003ca0fd22 ("Refactor disassembler selection"), as
well as a MIPS compressed ISA disassembly target regression from commit
6394c60699 ("Don't use print_insn_XXX in GDB"), which caused assertion
failures to trigger.
For example with the `mips-linux-gnu' target we get:
$ cat main.c
int
main (void)
{
return 0;
}
$ gcc -mips32r2 -O2 main.c -o main
$ gcc -mips16 -mips32r2 -O2 main.c -o main16
$ gdb
GNU gdb (GDB) 8.0.50.20170731-git
[...]
(gdb) file main
Reading symbols from main...done.
(gdb) show architecture
The target architecture is set automatically (currently mips:isa32r2)
(gdb) show endian
The target endianness is set automatically (currently big endian)
(gdb) disassemble main
Dump of assembler code for function main:
0x00400500 <+0>: jr ra
0x00400504 <+4>: move v0,zero
End of assembler dump.
(gdb) set architecture mips:isa64r2
The target architecture is assumed to be mips:isa64r2
(gdb) disassemble main
Dump of assembler code for function main:
0x00400500 <+0>:
.../gdb/arch-utils.c:979: internal-error: int default_print_insn(bfd_vma, disassemble_info*): Assertion `info->mach == bfd_get_mach (exec_bfd)' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) n
[...]
Command aborted.
(gdb) set architecture auto
The target architecture is set automatically (currently mips:isa32r2)
(gdb) set endian little
The target is assumed to be little endian
(gdb) disassemble main
Dump of assembler code for function main:
0x00400500 <+0>:
.../gdb/arch-utils.c:978: internal-error: int default_print_insn(bfd_vma, disassemble_info*): Assertion `info->endian == (bfd_big_endian (exec_bfd) ? BFD_ENDIAN_BIG : BFD_ENDIAN_LITTLE)' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) n
[...]
Command aborted.
(gdb) set endian auto
The target endianness is set automatically (currently big endian)
(gdb) set architecture i386
The target architecture is assumed to be i386
(gdb) disassemble main
Dump of assembler code for function main:
0x00400500 <+0>:
.../gdb/arch-utils.c:976: internal-error: int default_print_insn(bfd_vma, disassemble_info*): Assertion `info->arch == bfd_get_arch (exec_bfd)' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) n
[...]
Command aborted.
(gdb) set architecture auto
The target architecture is set automatically (currently mips:isa32r2)
(gdb) file main16
Load new symbol table from "main16"? (y or n) y
Reading symbols from main16...done.
(gdb) disassemble main
Dump of assembler code for function main:
0x00400501 <+0>:
.../gdb/arch-utils.c:979: internal-error: int default_print_insn(bfd_vma, disassemble_info*): Assertion `info->mach == bfd_get_mach (exec_bfd)' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) n
Command aborted.
(gdb)
Remove the assertions then, restoring previous semantics:
(gdb) file main
Reading symbols from main...done.
(gdb) set architecture mips:isa64r2
The target architecture is assumed to be mips:isa64r2
(gdb) disassemble main
Dump of assembler code for function main:
0x00400500 <+0>: jr ra
0x00400504 <+4>: move v0,zero
End of assembler dump.
(gdb) set endian little
The target is assumed to be little endian
(gdb) disassemble main
Dump of assembler code for function main:
0x00400500 <+0>: j 0x3800c
0x00400504 <+4>: addiu s0,t0,0
End of assembler dump.
(gdb) set architecture i386
The target architecture is assumed to be i386
(gdb) disassemble main
Dump of assembler code for function main:
0x00400500 <+0>: add %eax,%esp
0x00400502 <+2>: add %cl,(%eax)
0x00400504 <+4>: add %al,(%eax)
0x00400506 <+6>: adc %ah,0x0
End of assembler dump.
(gdb) set architecture auto
The target architecture is set automatically (currently mips:isa32r2)
(gdb) set endian auto
The target endianness is set automatically (currently big endian)
(gdb) file main16
Load new symbol table from "main16"? (y or n) y
Reading symbols from main16...done.
(gdb) disassemble main
Dump of assembler code for function main:
0x00400501 <+0>: jr ra
0x00400503 <+2>: li v0,0
End of assembler dump.
(gdb)
gdb/
* arch-utils.c (default_print_insn): Remove arch/mach/endian
assertions.
opcodes/
* disassemble.c (disassembler): Remove arch/mach/endian
assertions.
The bit pattern comment in "aarch64_opcode_lookup_1" is reversed.
This patch fixed this.
opcode/
* aarch64-gen.c (print_decision_tree_1): Reverse the index of PATTERN to
correct the print.
* aarch64-dis-2.c: Regenerated.
With IBM z14 officially announced I can add z14 as CPU name.
No regressions with that patch on s390x.
gas/ChangeLog:
2017-07-21 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* config/tc-s390.c (s390_parse_cpu): Add z14 as alternate CPU
name.
* doc/as.texinfo: Add z14 to CPU string list.
* doc/c-s390.texi: Likewise.
opcodes/ChangeLog:
2017-07-21 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-mkopc.c (main): Enable z14 as CPU string in the opcode
table.
The following relocation types were added to GCC/binutils:
ARC_JLI_SECTOFF is a relocation type in Metaware that is now used by
GCC as well to adjust the index of function calls to functions with
attribute jli_call_always.
bfd/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
John Eric Martin <John.Martin@emmicro-us.com>
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elf32-arc.c (JLI): Define.
* reloc.c: Add JLI relocations.
gas/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/jli-1.d: New file.
* testsuite/gas/arc/jli-1.s: Likewise.
* testsuite/gas/arc/taux.d: Update for jli_base.
include/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
John Eric Martin <John.Martin@emmicro-us.com>
* elf/arc-reloc.def: Add JLI relocs howto.
* opcode/arc-func.h (replace_jli): New function.
ld/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
John Eric Martin <John.Martin@emmicro-us.com>
* emulparams/arcelf.sh (JLI_START_TABLE): Define.
* scripttempl/elfarc.sc: Handle jlitab section.
* scripttempl/elfarcv2.sc: Likewise.
* testsuite/ld-arc/arc.exp: Add JLI test.
* testsuite/ld-arc/jli-script.ld: New file.
* testsuite/ld-arc/jli-simple.dd: Likewise.
* testsuite/ld-arc/jli-simple.rd: Likewise.
* testsuite/ld-arc/jli-simple.s: Likewise.
* testsuite/ld/testsuite/ld-arc/jli-overflow.s: Likewise.
* testsuite/ld/testsuite/ld-arc/jli-overflow.d: Likewise.
* testsuite/ld/testsuite/ld-arc/jli-overflow.err: Likewise.
opcode/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
John Eric Martin <John.Martin@emmicro-us.com>
* arc-opc.c (UIMM10_6_S_JLIOFF): Define.
(UIMM3_23): Adjust accordingly.
* arc-regs.h: Add/correct jli_base register.
* arc-tbl.h (jli_s): Likewise.
When elf section size is beyond unsigned int max value, objdump fails
to disassemble from that section. Ex on PowerPC,
$ objdump -h /proc/kcore
Idx Name Size VMA
4 load2 100000000 c000000000000000
Here, size of load2 section is 0x100000000. Also note that, 0xc00....
address range is kernel space for PowerPC. Now let's try to disassemble
do_sys_open() using /proc/kcore.
$ cat /proc/kallsyms | grep -A1 -w do_sys_open
c00000000036c000 T do_sys_open
c00000000036c2d0 T SyS_open
Before patch:
$ objdump -d --start-address=0xc00000000036c000 --stop-address=0xc00000000036c2d0 /proc/kcore
/proc/kcore: file format elf64-powerpcle
Disassembly of section load2:
c00000000036c000 <load2+0x36c000>:
c00000000036c000: Address 0xc00000000036c000 is out of bounds.
Fix this by changing type of 'buffer_length' from unsigned int to
size_t. After patch:
$ objdump -d --start-address=0xc00000000036c000 --stop-address=0xc00000000036c2d0 /proc/kcore
/proc/kcore: file format elf64-powerpcle
Disassembly of section load2:
c00000000036c000 <load2+0x36c000>:
c00000000036c000: fc 00 4c 3c addis r2,r12,252
c00000000036c004: 00 53 42 38 addi r2,r2,21248
c00000000036c008: a6 02 08 7c mflr r0
include/
* dis-asm.h (struct disassemble_info): Change type of buffer_length
field to size_t.
opcodes/
* dis-buf.c (buffer_read_memory): Change type of end_addr_offset,
max_addr_offset and octets variables to size_t.
88c1242dc0 changed some generated files rather than the source.
* cgen-dis.in: Include disassemble.h, not dis-asm.h.
* m32c-dis.c: Regenerate.
* mep-dis.c: Regenerate.
The instructions are not documented in the Intel SDM but are documented
in the AMD APM as an alias to the group 2, ModRM.reg == 4 variant.
Both AMD and Intel CPUs execute the C[0-1] and D[0-3] instructions as
expected, i.e., like the /4 aliases:
#include <stdio.h>
int main(void)
{
int a = 2;
printf ("a before: %d\n", a);
asm volatile(".byte 0xd0,0xf0" /* SHL %al */
: "+a" (a));
printf("a after : %d\n", a);
return 0;
}
$ ./a.out
a before: 2
a after : 4
This patch adds support mvfr2 control registers for armv8-a as
this was missed from the original port to armv8-a (documented
at G6.2.109 in (Issue B.a) of the ARM-ARM. This was discovered
by an internal user of the GNU toolchain.
I'd like to backport this to the binutils 2.28 and binutils 2.29
release branch if possible (with suitable testing and basically
checking removing the armv8-r parts).
Tristan - are you ok with the backports ?
Applied to trunk.
regards Ramana
2017-07-04 Ramana Radhakrishnan <ramana.radhakrishnan@arm.com>
* gas/config/tc-arm.c (arm_regs): Add MVFR2.
(do_vmrs): Constraint for MVFR2 and armv8.
(do_vmsr): Likewise.
* gas/testsuite/gas/arm/armv8-a+fp.d: Update.
* gas/testsuite/gas/arm/armv8-ar+fp.s: Likewise.
* gas/testsuite/gas/arm/armv8-r+fp.d: Likewise.
* gas/testsuite/gas/arm/vfp-bad.s: Likewise.
* gas/testsuite/gas/arm/vfp-bad.l: Likewise.
* opcodes/arm-dis.c: Support MVFR2 in disassembly
with vmrs and vmsr.