ENDBR64 is added to the special TLSDESC entry, which is similar to the
PLT0 entry, in the x86-64 lazy procedure linkage table to support Intel
CET. The NaCl PLT is different from the normal PLT. This patch adds
plt_tlsdesc_entry, plt_tlsdesc_entry_size, plt_tlsdesc_got1_offset,
plt_tlsdesc_got2_offset, plt_tlsdesc_got1_insn_end and
plt_tlsdesc_got2_insn_end to elf_x86_lazy_plt_layout to support both
normal and NaCl TLSDESC entries. This fixed
FAIL: TLS descriptor -fpic -shared transitions
for x86_64-nacl.
* elf32-i386.c (elf_i386_lazy_plt): Add plt_tlsdesc_entry,
plt_tlsdesc_entry_size, plt_tlsdesc_got1_offset,
plt_tlsdesc_got2_offset, plt_tlsdesc_got1_insn_end and
plt_tlsdesc_got2_insn_end for TLSDESC entry.
(elf_i386_lazy_ibt_plt): Likewise.
(elf_i386_nacl_plt): Likewise.
* elf64-x86-64.c (tlsdesc_plt_entry): Moved and renamed to ...
(elf_x86_64_tlsdesc_plt_entry): This.
(elf_x86_64_lazy_plt): Add plt_tlsdesc_entry,
plt_tlsdesc_entry_size, plt_tlsdesc_got1_offset,
plt_tlsdesc_got2_offset, plt_tlsdesc_got1_insn_end and
plt_tlsdesc_got2_insn_end for TLSDESC entry.
(elf_x86_64_lazy_bnd_plt): Likewise.
(elf_x86_64_lazy_ibt_plt): Likewise.
(elf_x32_lazy_ibt_plt): Likewise.
(elf_x86_64_nacl_plt): Likewise.
(elf_x86_64_finish_dynamic_sections): Use plt_tlsdesc_entry,
plt_tlsdesc_entry_size, plt_tlsdesc_got1_offset,
plt_tlsdesc_got2_offset, plt_tlsdesc_got1_insn_end and
plt_tlsdesc_got2_insn_end to update TLSDESC entry.
* elfxx-x86.h (elf_x86_lazy_plt_layout): Update comments.
Add plt_tlsdesc_entry, plt_tlsdesc_entry_size,
plt_tlsdesc_got1_offset, plt_tlsdesc_got2_offset,
plt_tlsdesc_got1_insn_end and plt_tlsdesc_got2_insn_end.
(elf_x86_non_lazy_plt_layout): Update comments.
(elf_x86_plt_layout): Likewise.
bfd_hide_sym_by_version can't be used to check if a versioned symbol is
hidden. This patch adds _bfd_elf_link_hide_sym_by_version to support
both versioned and unversioned symbols by extracting versioned symbol
check from _bfd_elf_link_assign_sym_version.
bfd/
PR ld/23194
* elf-bfd.h (_bfd_elf_link_hide_sym_by_version): New.
* elflink.c (_bfd_elf_link_hide_versioned_symbol): New function.
Extracted from _bfd_elf_link_assign_sym_version.
(_bfd_elf_link_hide_sym_by_version): New function.
(_bfd_elf_link_assign_sym_version): Use
_bfd_elf_link_hide_versioned_symbol.
* elfxx-x86.c (_bfd_x86_elf_link_symbol_references_local): Call
_bfd_elf_link_hide_sym_by_version instead of
bfd_hide_sym_by_version. Don't check unversioned symbol.
ld/
PR ld/23194
* testsuite/ld-i386/pr23194.d: Expect only R_386_GLOB_DAT
against foobar.
* testsuite/ld-i386/pr23194.map: Add foobar.
* testsuite/ld-x86-64/pr23194.map: Likewise.
* testsuite/ld-i386/pr23194.s: Add a common foobar symbol.
* testsuite/ld-x86-64/pr23194.s: Likewise.
* testsuite/ld-x86-64/pr23194.d: Expect only R_X86_64_GLOB_DAT
against foobar.
This patch regenerates a number of files that either were edited by
hand or not regenerated when s12z support was added to binutils.
bfd/
* Makefile.in: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
gas/
* po/POTFILES.in: Regenerate.
ld/
* po/BLD-POTFILES.in: Regenerate.
opcodes/
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
Warnings from configure tests aren't usually checked. gcc's
"visibility attribute not supported in this configuration" warning is
enabled by default so we don't need to add any warning flag except
-Werror.
* configure.ac (bfd_cv_hidden): Run test with -Werror in CFLAGS.
* configure: Regenerate.
The last patch was enough to cure the testcase, but not the original
object file. This patch does the same for hppa as is done for ppc64,
simply test for the section belonging to a group. I've also
restricted stubs to load, alloc, code sections.
PR 23207
* elf32-hppa.c (hppa_get_stub_entry): Return NULL when link_sec
is NULL.
(elf32_hppa_size_stubs): Only create stubs for load, alloc, code
sections.
(final_link_relocate): Revert last change.
We don't create PLT call stubs for anything in non-alloc sections,
so it doesn't pay to go looking for them. The problem is that
non-alloc sections aren't processed by group_sections and thus don't
get a link_sec set up for them.
PR 23207
* elf32-hppa.c (final_link_relocate): Don't look for plt call
stubs in non-alloc sections.
All sections in a section group should be marked with SHF_GROUP. But
some tools generate broken objects without SHF_GROUP. This patch fixes
them up for objcopy and strip.
PR binutils/23199
* elf.c (setup_group): Mark section in a section group with
SHF_GROUP.
bfd_hide_sym_by_version can't be used to check if a versioned symbol is
hidden. It has to be synced with _bfd_elf_link_assign_sym_version to
get the correct answer.
bfd/
PR ld/23194
* elfxx-x86.c (_bfd_x86_elf_link_symbol_references_local): Don't
set eh->local_ref to 1 if a symbol is versioned and there is a
version script.
ld/
PR ld/23194
* testsuite/ld-i386/i386.exp: Run pr23194.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr23194.d: New file.
* testsuite/ld-i386/pr23194.map: Likewise.
* testsuite/ld-i386/pr23194.s: Likewise.
* testsuite/ld-x86-64/pr23194.d: Likewise.
* testsuite/ld-x86-64/pr23194.map: Likewise.
* testsuite/ld-x86-64/pr23194.s: Likewise.
bfd * Makefile.am: Add s12z files.
* Makefile.in: Regenerate.
* archures.c: Add bfd_s12z_arch.
* bfd-in.h: Add exports of bfd_putb24 and bfd_putl24.
* bfd-in2.h: Regenerate.
* config.bfd: Add s12z target.
* configure.ac: Add s12z target.
* configure: Regenerate.
* cpu-s12z.c: New file.
* elf32-s12z.c: New file.
* libbfd.c (bfd_putb24): New function.
(bfd_putl24): New function.
* libbfd.h: Regenerate.
* reloc.c: Add s12z relocations.
(bfd_get_reloc_size): Handle size 5 relocs.
* targets.c: Add s12z_elf32_vec.
opcodes * Makefile.am: Add support for s12z architecture.
* configure.ac: Likewise.
* disassemble.c: Likewise.
* disassemble.h: Likewise.
* Makefile.in: Regenerate.
* configure: Regenerate.
* s12z-dis.c: New file.
* s12z.h: New file.
include * elf/s12z.h: New header.
ld * Makefile.am: Add support for s12z architecture.
* configure.tgt: Likewise.
* Makefile.in: Regenerate.
* emulparams/m9s12zelf.sh: New file.
* scripttempl/elfm9s12z.sc: New file.
* testsuite/ld-discard/static.d: Expect to fail for the s12z
target.
* testsuite/ld-elf/endsym.d: Likewise.
* testsuite/ld-elf/merge.d: Likewise.
* testsuite/ld-elf/pr14926.d: Skip for the s12z target.
* testsuite/ld-elf/sec64k.exp: Likewise.
* testsuite/ld-s12z: New directory.
* testsuite/ld-s12z/opr-linking.d: New file.
* testsuite/ld-s12z/opr-linking.s: New file.
* testsuite/ld-s12z/relative-linking.d: New file.
* testsuite/ld-s12z/relative-linking.s: New file.
* testsuite/ld-s12z/z12s.exp: New file.
gas * Makefile.am: Add support for s12z target.
* Makefile.in: Regenerate.
* NEWS: Mention the new support.
* config/tc-s12z.c: New file.
* config/tc-s12z.h: New file.
* configure.tgt: Add s12z support.
* doc/Makefile.am: Likewise.
* doc/Makefile.in: Regenerate.
* doc/all.texi: Add s12z documentation.
* doc/as.textinfo: Likewise.
* doc/c-s12z.texi: New file.
* testsuite/gas/s12z: New directory.
* testsuite/gas/s12z/abs.d: New file.
* testsuite/gas/s12z/abs.s: New file.
* testsuite/gas/s12z/adc-imm.d: New file.
* testsuite/gas/s12z/adc-imm.s: New file.
* testsuite/gas/s12z/adc-opr.d: New file.
* testsuite/gas/s12z/adc-opr.s: New file.
* testsuite/gas/s12z/add-imm.d: New file.
* testsuite/gas/s12z/add-imm.s: New file.
* testsuite/gas/s12z/add-opr.d: New file.
* testsuite/gas/s12z/add-opr.s: New file.
* testsuite/gas/s12z/and-imm.d: New file.
* testsuite/gas/s12z/and-imm.s: New file.
* testsuite/gas/s12z/and-opr.d: New file.
* testsuite/gas/s12z/and-opr.s: New file.
* testsuite/gas/s12z/and-or-cc.d: New file.
* testsuite/gas/s12z/and-or-cc.s: New file.
* testsuite/gas/s12z/bfext-special.d: New file.
* testsuite/gas/s12z/bfext-special.s: New file.
* testsuite/gas/s12z/bfext.d: New file.
* testsuite/gas/s12z/bfext.s: New file.
* testsuite/gas/s12z/bit-manip.d: New file.
* testsuite/gas/s12z/bit-manip.s: New file.
* testsuite/gas/s12z/bit.d: New file.
* testsuite/gas/s12z/bit.s: New file.
* testsuite/gas/s12z/bra-expression-defined.d: New file.
* testsuite/gas/s12z/bra-expression-defined.s: New file.
* testsuite/gas/s12z/bra-expression-undef.d: New file.
* testsuite/gas/s12z/bra-expression-undef.s: New file.
* testsuite/gas/s12z/bra.d: New file.
* testsuite/gas/s12z/bra.s: New file.
* testsuite/gas/s12z/brclr-symbols.d: New file.
* testsuite/gas/s12z/brclr-symbols.s: New file.
* testsuite/gas/s12z/brset-clr-opr-imm-rel.d: New file.
* testsuite/gas/s12z/brset-clr-opr-imm-rel.s: New file.
* testsuite/gas/s12z/brset-clr-opr-reg-rel.d: New file.
* testsuite/gas/s12z/brset-clr-opr-reg-rel.s: New file.
* testsuite/gas/s12z/brset-clr-reg-imm-rel.d: New file.
* testsuite/gas/s12z/brset-clr-reg-imm-rel.s: New file.
* testsuite/gas/s12z/brset-clr-reg-reg-rel.d: New file.
* testsuite/gas/s12z/brset-clr-reg-reg-rel.s: New file.
* testsuite/gas/s12z/clb.d: New file.
* testsuite/gas/s12z/clb.s: New file.
* testsuite/gas/s12z/clr-opr.d: New file.
* testsuite/gas/s12z/clr-opr.s: New file.
* testsuite/gas/s12z/clr.d: New file.
* testsuite/gas/s12z/clr.s: New file.
* testsuite/gas/s12z/cmp-imm.d: New file.
* testsuite/gas/s12z/cmp-imm.s: New file.
* testsuite/gas/s12z/cmp-opr-inc.d: New file.
* testsuite/gas/s12z/cmp-opr-inc.s: New file.
* testsuite/gas/s12z/cmp-opr-rdirect.d: New file.
* testsuite/gas/s12z/cmp-opr-rdirect.s: New file.
* testsuite/gas/s12z/cmp-opr-reg.d: New file.
* testsuite/gas/s12z/cmp-opr-reg.s: New file.
* testsuite/gas/s12z/cmp-opr-rindirect.d: New file.
* testsuite/gas/s12z/cmp-opr-rindirect.s: New file.
* testsuite/gas/s12z/cmp-opr-sxe4.d: New file.
* testsuite/gas/s12z/cmp-opr-sxe4.s: New file.
* testsuite/gas/s12z/cmp-opr-xys.d: New file.
* testsuite/gas/s12z/cmp-opr-xys.s: New file.
* testsuite/gas/s12z/cmp-s-imm.d: New file.
* testsuite/gas/s12z/cmp-s-imm.s: New file.
* testsuite/gas/s12z/cmp-s-opr.d: New file.
* testsuite/gas/s12z/cmp-s-opr.s: New file.
* testsuite/gas/s12z/cmp-xy.d: New file.
* testsuite/gas/s12z/cmp-xy.s: New file.
* testsuite/gas/s12z/com-opr.d: New file.
* testsuite/gas/s12z/com-opr.s: New file.
* testsuite/gas/s12z/complex-shifts.d: New file.
* testsuite/gas/s12z/complex-shifts.s: New file.
* testsuite/gas/s12z/db-tb-cc-opr.d: New file.
* testsuite/gas/s12z/db-tb-cc-opr.s: New file.
* testsuite/gas/s12z/db-tb-cc-reg.d: New file.
* testsuite/gas/s12z/db-tb-cc-reg.s: New file.
* testsuite/gas/s12z/dbCC.d: New file.
* testsuite/gas/s12z/dbCC.s: New file.
* testsuite/gas/s12z/dec-opr.d: New file.
* testsuite/gas/s12z/dec-opr.s: New file.
* testsuite/gas/s12z/dec.d: New file.
* testsuite/gas/s12z/dec.s: New file.
* testsuite/gas/s12z/div.d: New file.
* testsuite/gas/s12z/div.s: New file.
* testsuite/gas/s12z/eor.d: New file.
* testsuite/gas/s12z/eor.s: New file.
* testsuite/gas/s12z/exg.d: New file.
* testsuite/gas/s12z/exg.s: New file.
* testsuite/gas/s12z/ext24-ld-xy.d: New file.
* testsuite/gas/s12z/ext24-ld-xy.s: New file.
* testsuite/gas/s12z/inc-opr.d: New file.
* testsuite/gas/s12z/inc-opr.s: New file.
* testsuite/gas/s12z/inc.d: New file.
* testsuite/gas/s12z/inc.s: New file.
* testsuite/gas/s12z/inh.d: New file.
* testsuite/gas/s12z/inh.s: New file.
* testsuite/gas/s12z/jmp.d: New file.
* testsuite/gas/s12z/jmp.s: New file.
* testsuite/gas/s12z/jsr.d: New file.
* testsuite/gas/s12z/jsr.s: New file.
* testsuite/gas/s12z/ld-imm-page2.d: New file.
* testsuite/gas/s12z/ld-imm-page2.s: New file.
* testsuite/gas/s12z/ld-imm.d: New file.
* testsuite/gas/s12z/ld-imm.s: New file.
* testsuite/gas/s12z/ld-immu18.d: New file.
* testsuite/gas/s12z/ld-immu18.s: New file.
* testsuite/gas/s12z/ld-large-direct.d: New file.
* testsuite/gas/s12z/ld-large-direct.s: New file.
* testsuite/gas/s12z/ld-opr.d: New file.
* testsuite/gas/s12z/ld-opr.s: New file.
* testsuite/gas/s12z/ld-s-opr.d: New file.
* testsuite/gas/s12z/ld-s-opr.s: New file.
* testsuite/gas/s12z/ld-small-direct.d: New file.
* testsuite/gas/s12z/ld-small-direct.s: New file.
* testsuite/gas/s12z/lea-immu18.d: New file.
* testsuite/gas/s12z/lea-immu18.s: New file.
* testsuite/gas/s12z/lea.d: New file.
* testsuite/gas/s12z/lea.s: New file.
* testsuite/gas/s12z/mac.d: New file.
* testsuite/gas/s12z/mac.s: New file.
* testsuite/gas/s12z/min-max.d: New file.
* testsuite/gas/s12z/min-max.s: New file.
* testsuite/gas/s12z/mod.d: New file.
* testsuite/gas/s12z/mod.s: New file.
* testsuite/gas/s12z/mov.d: New file.
* testsuite/gas/s12z/mov.s: New file.
* testsuite/gas/s12z/mul-imm.d: New file.
* testsuite/gas/s12z/mul-imm.s: New file.
* testsuite/gas/s12z/mul-opr-opr.d: New file.
* testsuite/gas/s12z/mul-opr-opr.s: New file.
* testsuite/gas/s12z/mul-opr.d: New file.
* testsuite/gas/s12z/mul-opr.s: New file.
* testsuite/gas/s12z/mul-reg.d: New file.
* testsuite/gas/s12z/mul-reg.s: New file.
* testsuite/gas/s12z/mul.d: New file.
* testsuite/gas/s12z/mul.s: New file.
* testsuite/gas/s12z/neg-opr.d: New file.
* testsuite/gas/s12z/neg-opr.s: New file.
* testsuite/gas/s12z/not-so-simple-shifts.d: New file.
* testsuite/gas/s12z/not-so-simple-shifts.s: New file.
* testsuite/gas/s12z/opr-18u.d: New file.
* testsuite/gas/s12z/opr-18u.s: New file.
* testsuite/gas/s12z/opr-expr.d: New file.
* testsuite/gas/s12z/opr-expr.s: New file.
* testsuite/gas/s12z/opr-ext-18.d: New file.
* testsuite/gas/s12z/opr-ext-18.s: New file.
* testsuite/gas/s12z/opr-idx-24-reg.d: New file.
* testsuite/gas/s12z/opr-idx-24-reg.s: New file.
* testsuite/gas/s12z/opr-idx3-reg.d: New file.
* testsuite/gas/s12z/opr-idx3-reg.s: New file.
* testsuite/gas/s12z/opr-idx3-xysp-24.d: New file.
* testsuite/gas/s12z/opr-idx3-xysp-24.s: New file.
* testsuite/gas/s12z/opr-indirect-expr.d: New file.
* testsuite/gas/s12z/opr-indirect-expr.s: New file.
* testsuite/gas/s12z/opr-symbol.d: New file.
* testsuite/gas/s12z/opr-symbol.s: New file.
* testsuite/gas/s12z/or-imm.d: New file.
* testsuite/gas/s12z/or-imm.s: New file.
* testsuite/gas/s12z/or-opr.d: New file.
* testsuite/gas/s12z/or-opr.s: New file.
* testsuite/gas/s12z/p2-mul.d: New file.
* testsuite/gas/s12z/p2-mul.s: New file.
* testsuite/gas/s12z/page2-inh.d: New file.
* testsuite/gas/s12z/page2-inh.s: New file.
* testsuite/gas/s12z/psh-pul.d: New file.
* testsuite/gas/s12z/psh-pul.s: New file.
* testsuite/gas/s12z/qmul.d: New file.
* testsuite/gas/s12z/qmul.s: New file.
* testsuite/gas/s12z/rotate.d: New file.
* testsuite/gas/s12z/rotate.s: New file.
* testsuite/gas/s12z/s12z.exp: New file.
* testsuite/gas/s12z/sat.d: New file.
* testsuite/gas/s12z/sat.s: New file.
* testsuite/gas/s12z/sbc-imm.d: New file.
* testsuite/gas/s12z/sbc-imm.s: New file.
* testsuite/gas/s12z/sbc-opr.d: New file.
* testsuite/gas/s12z/sbc-opr.s: New file.
* testsuite/gas/s12z/shift.d: New file.
* testsuite/gas/s12z/shift.s: New file.
* testsuite/gas/s12z/simple-shift.d: New file.
* testsuite/gas/s12z/simple-shift.s: New file.
* testsuite/gas/s12z/single-ops.d: New file.
* testsuite/gas/s12z/single-ops.s: New file.
* testsuite/gas/s12z/specd6.d: New file.
* testsuite/gas/s12z/specd6.s: New file.
* testsuite/gas/s12z/st-large-direct.d: New file.
* testsuite/gas/s12z/st-large-direct.s: New file.
* testsuite/gas/s12z/st-opr.d: New file.
* testsuite/gas/s12z/st-opr.s: New file.
* testsuite/gas/s12z/st-s-opr.d: New file.
* testsuite/gas/s12z/st-s-opr.s: New file.
* testsuite/gas/s12z/st-small-direct.d: New file.
* testsuite/gas/s12z/st-small-direct.s: New file.
* testsuite/gas/s12z/st-xy.d: New file.
* testsuite/gas/s12z/st-xy.s: New file.
* testsuite/gas/s12z/sub-imm.d: New file.
* testsuite/gas/s12z/sub-imm.s: New file.
* testsuite/gas/s12z/sub-opr.d: New file.
* testsuite/gas/s12z/sub-opr.s: New file.
* testsuite/gas/s12z/tfr.d: New file.
* testsuite/gas/s12z/tfr.s: New file.
* testsuite/gas/s12z/trap.d: New file.
* testsuite/gas/s12z/trap.s: New file.
binutils* readelf.c: Add support for s12z architecture.
* testsuite/lib/binutils-common.exp (is_elf_format): Excluse s12z
targets.
Since symbols created by HIDDEN and PROVIDE_HIDDEN assignments in
linker script may be marked as defined, but not hidden, we can't
set eh->local_ref to 1 in _bfd_x86_elf_link_symbol_references_local.
Also R_386_GOT32X should be handled as just like R_386_GOT32 when
relocating a section. The input R_386_GOT32X relocations, which
can be relaxed, should have been converted to R_386_PC32, R_386_32
or R_386_GOTOFF.
bfd/
PR ld/23189
* elf32-i386.c (elf_i386_relocate_section): Handle R_386_GOT32X
like R_386_GOT32.
* elfxx-x86.c (_bfd_x86_elf_link_symbol_references_local): Don't
set eh->local_ref to 1 for linker defined symbols.
ld/
PR ld/23189
* testsuite/ld-i386/i386.exp: Run pr23189.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr23189.d: New file.
* testsuite/ld-i386/pr23189.s: Likewise.
* testsuite/ld-i386/pr23189.t: Likewise.
* testsuite/ld-x86-64/pr23189.d: Likewise.
* testsuite/ld-x86-64/pr23189.s: Likewise.
* testsuite/ld-x86-64/pr23189.t: Likewise.
This patch prevents elf_next_in_group list pointer confusion when
SHT_GROUP sections specify other SHT_GROUP sections in their list of
group sections.
PR 23199
* elf.c (setup_group): Formatting. Check that SHT_GROUP entries
don't point at other SHT_GROUP sections. Set shdr corresponding
to invalid entry, to NULL rather than section 0. Identify
SHT_GROUP section index when reporting an error. Cope with NULL
shdr pointer.
Fix:
cc1: warnings being treated as errors
.../bfd/elf32-nds32.c: In function 'nds32_convert_32_to_16':
.../bfd/elf32-nds32.c:6816: error: 'insn_type' may be used uninitialized in this function
make[4]: *** [elf32-nds32.lo] Error 1
seen with GCC 4.1.2 and 4.4.7.
bfd/
* elf32-nds32.c (nds32_convert_32_to_16): Preset `insn_type'.
https://sourceware.org/ml/binutils/2013-05/msg00271.html was supposed
to banish "file format is ambiguous" errors for ELF. It didn't,
because the code supposedly detecting formats that implement
match_priority didn't work. That was due to not placing all matching
targets into the vector of matching targets. ELF objects should all
match the generic ELF target (priority 2), plus one or more machine
specific targets (priority 1), and perhaps a single machine specific
target with OS/ABI set (priority 0, best match). So the armel object
in the testcase actually matches elf32-littlearm,
elf32-littlearm-symbian, and elf32-littlearm-vxworks (all priority 1),
and elf32-little (priority 2). As the PR reported, elf32-little
wasn't seen as matching. Fixing that part of the problem wasn't too
difficult but matching the generic ELF target as well as the ARM ELF
targets resulted in ARM testsuite failures.
These proved to be the annoying reordering of stubs that occurs from
time to time due to the stub names containing the section id.
Matching another target causes more sections to be created in
elf_object_p. If section ids change, stub names change, which results
in different hashing and can therefore result in different hash table
traversal and stub creation order. That particular problem is fixed
by resetting section_id to the initial state before attempting each
target match, and taking a snapshot of its value after a successful
match.
PR 22458
* format.c (struct bfd_preserve): Add section_id.
(bfd_preserve_save, bfd_preserve_restore): Save and restore
_bfd_section_id.
(bfd_reinit): Set _bfd_section_id.
(bfd_check_format_matches): Put all matches of any priority into
matching_vector. Save initial section id and start each attempted
match at that section id.
* libbfd-in.h (_bfd_section_id): Declare.
* section.c (_bfd_section_id): Rename from section_id and make
global. Adjust uses.
(bfd_get_next_section_id): Delete.
* elf64-ppc.c (ppc64_elf_setup_section_lists): Replace use of
bfd_get_section_id with _bfd_section_id.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
2018-05-15 Christophe Guillon <christophe.guillon@st.com>
* coffcode.h (coff_bigobj_swap_aux_in): Make sure that all fields
of the aux structure are initialised.
Change-Id: I81be255ac6611afbe00995fac550e98e6a07e5df
bfd * targets.c: Wrap nfp_elf64_vec in BFD64 ifdef.
include * opcode/nfp.h: Use uint64_t instead of bfd_vma.
opcodes * nfp-dis.c: Use uint64_t for instruction variables, not bfd_vma.
If IFUNC symbol is defined in position-dependent executable, we should
change it to the normal function and set its address to its PLT entry
which should be resolved by R_*_IRELATIVE at run-time. All external
references should be resolved to its PLT in executable.
bfd/
PR ld/23169
* elf-ifunc.c (_bfd_elf_allocate_ifunc_dyn_relocs): Don't issue
an error on IFUNC pointer defined in PDE.
* elf32-i386.c (elf_i386_finish_dynamic_symbol): Call
_bfd_x86_elf_link_fixup_ifunc_symbol.
* elf64-x86-64.c (elf_x86_64_finish_dynamic_symbol): Likewise.
* elfxx-x86.c (_bfd_x86_elf_link_fixup_ifunc_symbol): New
function.
* elfxx-x86.h (_bfd_x86_elf_link_fixup_ifunc_symbol): New.
ld/
PR ld/23169
* testsuite/ld-ifunc/ifunc-9-i386.d: New file.
* testsuite/ld-ifunc/ifunc-9-x86-64.d: Likewise.
* testsuite/ld-ifunc/pr23169a.c: Likewise.
* testsuite/ld-ifunc/pr23169a.rd: Likewise.
* testsuite/ld-ifunc/pr23169b.c: Likewise.
* testsuite/ld-ifunc/pr23169b.c: Likewise.
* testsuite/ld-ifunc/pr23169c.rd: Likewise.
* testsuite/ld-ifunc/pr23169c.rd: Likewise.
* testsuite/ld-ifunc/ifunc-9-x86.d: Removed.
* testsuite/ld-ifunc/ifunc.exp: Run PR ld/23169 tests.
__bss_start, _end and _edata are defined by linker to mark regions
within executables and shared libraries. All references within
executables should be locally resolved.
This patch doesn't change how their references within shared libraries
are resolved.
bfd/
PR ld/23162
* elfxx-x86.c (elf_x86_linker_defined): New function.
(_bfd_x86_elf_link_check_relocs): Use it to mark __bss_start,
_end and _edata locally defined within executables.
ld/
PR ld/23162
* testsuite/ld-elf/pr23162.map: New file.
* testsuite/ld-elf/pr23162.rd: Likewise.
* testsuite/ld-elf/pr23162a.c: Likewise.
* testsuite/ld-elf/pr23162b.c: Likewise.
* testsuite/ld-elf/shared.exp: Run PR ld/23162 tests.
Sections may well belong in multiple segments. The testcase in the PR
saw an allocated section being assigned to an ABIFLAGS segment, then
not being assigned to a LOAD segment because it had already been
handled. To fix that particular problem this patch sets and tests
segment_mark only for LOAD segments. I kept the segment_mark test for
LOAD segments because I think there may otherwise be a problem with
zero size sections.
A few other problems showed up with the testcase. Some targets align
.dynamic, resulting in the test failing with "section .dynamic lma
0x800000c0 adjusted to 0x800000cc" and similar messages. I've tried
to handle that with some more hacks to the segment lma, which do the
right thing for the testcase, but may well fail in other situations.
I've also removed the tests of segment lma (p_paddr) and code involved
in deciding that an adjusted segment no longer covers the file or
program headers. Those test can't be correct in the face of objcopy
--change-section-lma. It may be necessary to reinstate the tests but
do them modulo page size, but we'll see how this goes.
PR 20659
bfd/
* elf.c (rewrite_elf_program_header): Use segment_mark only for
PT_LOAD headers. Delete first_matching_lma and first_suggested_lma.
Instead make matching_lma and suggested_lma pointers to the
sections. Align section vma and lma calculated from segment.
Don't clear includes_phdrs or includes_filehdr based on p_paddr
test. Try to handle alignment padding before first section by
adjusting new segment lma down. Adjust PT_PHDR map p_paddr.
ld/
* testsuite/ld-elf/changelma.d,
* testsuite/ld-elf/changelma.lnk,
* testsuite/ld-elf/changelma.s: New test.
My original implementation for LDI32 pseudo does not conform to
the TI ABI. I wrongly documented my TI PRU ELF object files inspection,
which got propagated into my binutils implementation.
Issue was exposed when running the GCC ABI testsuite against TI toolchain.
According to TI ABI, LDI32 must use first LDI instruction to load
the MSB 16bits, and second LDI instruction for the LSB 16bits.
This patch will break binary compatibility with previously released
binutils versions for PRU. Still, I think it is better to fix
binutils to conform to the chip vendor ABI.
bfd * elf32-pru.c (pru_elf32_do_ldi32_relocate): Make LDI32 relocation
conformant to TI ABI.
(pru_elf32_relax_section): Likewise.
(pru_elf_relax_delete_bytes): Fix offsets for new LDI32 code.
* elf32-pru.c (pru_elf32_do_ldi32_relocate): Ignore addend.
(pru_elf32_pmem_relocate): Trap - should not get here.
(pru_elf32_relocate_section): Add support for REL relocations.
(elf_info_to_howto_rel): Enable REL.
(elf_backend_may_use_rel_p): Likewise.
(elf_backend_may_use_rela_p): Likewise.
(elf_backend_default_use_rela_p): Likewise.
gas * config/tc-pru.c (md_apply_fix): Make LDI32 relocation conformant
to TI ABI.
(pru_assemble_arg_i): Likewise.
(output_insn_ldi32): Likewise.
* testsuite/gas/pru/ldi.d: Update test for the now fixed LDI32.
* gas/config/tc-pru.c (pru_assemble_arg_b): Check imm8 operand range.
* gas/testsuite/gas/pru/illegal2.l: New test.
* gas/testsuite/gas/pru/illegal2.s: New test.
* gas/testsuite/gas/pru/pru.exp: Register new illegal2 test.
ld * scripttempl/pru.sc: Add LD sections to allow linking TI
toolchain object files.
* scripttempl/pru.sc: Switch to init_array.
* testsuite/ld-pru/ldi32.d: Update LDI32 test to conform to TI ABI.
* testsuite/ld-pru/norelax_ldi32-data.d: Likewise.
* testsuite/ld-pru/norelax_ldi32-dis.d: Likewise.
* testsuite/ld-pru/relax_ldi32-data.d: Likewise.
* testsuite/ld-pru/relax_ldi32-dis.d: Likewise.
PR 22809
* elf.c (bfd_elf_get_str_section): Check for an excessively large
string section.
* elf-attrs.c (_bfd_elf_parse_attributes): Issue an error if the
attribute section is larger than the size of the file.
Avoids gcc pr85623 for these calls.
* cofflink.c (_bfd_coff_link_input_bfd): Use memcmp rather than
strncmp when checking for ".bf" special symbol.
* prXXigen.c (_bfd_XXi_swap_scnhdr_out): Make pe_required_section_flags
section name a char array, remove sentinal known_sections entry,
and adjust loop over known_sections to suit. Use memcmp rather
than strncmp.
This patch is aimed at silencing gcc8 -Wstringop-truncation warnings.
Unfortunately adding __attribute__ ((__nonstring)) doesn't work in a
number of the places patched here, (see
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=85643) so if you have
recent glibc headers installed you'll need to configure binutils with
--disable-werror to compile using gcc8 or gcc9.
include/
* ansidecl.h: Import from gcc.
* coff/internal.h (struct internal_scnhdr): Add ATTRIBUTE_NONSTRING
to s_name.
(struct internal_syment): Add ATTRIBUTE_NONSTRING to _n_name.
bfd/
* elf-linux-core.h (struct elf_external_linux_prpsinfo32_ugid32),
(struct elf_external_linux_prpsinfo32_ugid16),
(struct elf_external_linux_prpsinfo64_ugid32),
(struct elf_external_linux_prpsinfo64_ugid16): Add ATTRIBUTE_NONSTRING
to pr_fname and pr_psargs fields. Remove GCC diagnostic pragmas.
Move comment to..
* elf.c (elfcore_write_prpsinfo): ..here. Indent nested preprocessor
directives.
* elf32-arm.c (elf32_arm_nabi_write_core_note): Add ATTRIBUTE_NONSTRING
to data.
* elf32-ppc.c (ppc_elf_write_core_note): Likewise.
* elf32-s390.c (elf_s390_write_core_note): Likewise.
* elf64-s390.c (elf_s390_write_core_note): Likewise.
* elfxx-aarch64.c (_bfd_aarch64_elf_write_core_note): Likewise.
* elf64-x86-64.c (elf_x86_64_write_core_note): Add GCC diagnostic
pragmas.
* peXXigen.c (_bfd_XXi_swap_scnhdr_out): Use strnlen to avoid
false positive gcc-8 warning.
gas/
* config/obj-evax.c (shorten_identifier): Use memcpy in place
of strncpy.
* config/obj-macho.c (obj_mach_o_make_or_get_sect): Ensure
segname and sectname fields are NUL terminated.
When IBM long double is used, the .gnu_attribute 4 is set to 1 | (1 *
4). IEEE long double sets the same .gnu_attribute to 1 | (3 * 4).
* elf32-ppc.c (_bfd_elf_ppc_merge_fp_attributes): Fix the order
of arguments when warning about different long double types.
The _gp_disp is a magic symbol, always implicitly defined by the linker.
It does not make a sense to write it into symbol tables for output files.
Moreover, now if the linker gets a version script, the _gp_disp symbol
gets zero version definition index. The zero index means[1]:
"The symbol is local, not available outside the object."
But the _gp_disp symbol has GLOBAL binding. That confuses some tools
like for example the LLD linker when they get such files as inputs.
This patch fixes the problem - it prevents writing the _gp_disp symbol
in regular and dynamic symbol tables.
This was tested by running LD test suite on a mipsel-linux board.
References:
[1] "Linux Standard Base Specification", Section "10.7.2 Symbol
Version Table", p. 32
2018-05-03 Simon Atanasyan <simon@atanasyan.com>
bfd/
* elf32-mips.c: (elf32_mips_fixup_symbol): New function.
(elf_backend_fixup_symbol): New macro.
* elfxx-mips.c: (mips_elf_output_extsym): Discard _gp_disp
handling.
(_bfd_mips_elf_finish_dynamic_symbol): Likewise.
ld/
* testsuite/ld-mips-elf/gp-disp-sym.d: New test.
* testsuite/ld-mips-elf/gp-disp-sym.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new test.
* testsuite/ld-mips-elf/mips16-pic-2.ad: Update for _gp_disp
symbol removal.
* testsuite/ld-mips-elf/mips16-pic-2.nd: Likewise.
* testsuite/ld-mips-elf/pic-and-nonpic-3a.dd: Likewise.
* testsuite/ld-mips-elf/tlslib-o32-hidden.got: Likewise.
* testsuite/ld-mips-elf/tlslib-o32-ver.got: Likewise.
* testsuite/ld-mips-elf/tlslib-o32.got: Likewise.
Two of the gcc ifunc tests fail for ppc32, due to my pr22374 fix being
a little too enthusiastic in trimming PLT entries. ppc64 doesn't have
the same failures because ppc64_elf_check_relocs happens to set
needs_plt for any ifunc reloc.
PR 23123
PR 22374
* elf32-ppc.c (ppc_elf_adjust_dynamic_symbol): Don't drop plt
relocs for ifuncs.
* elf64-ppc.c (ppc64_elf_adjust_dynamic_symbol): Comment fixes.
If you create an ifunc using GCC's __attribute__ ifunc, like:
extern int gnu_ifunc (int arg);
static int gnu_ifunc_target (int arg) { return 0; }
__typeof (gnu_ifunc) *gnu_ifunc_resolver (unsigned long hwcap) { return gnu_ifunc_target; }
__typeof (gnu_ifunc) gnu_ifunc __attribute__ ((ifunc ("gnu_ifunc_resolver")));
then you end up with two (function descriptor) symbols, one for the
ifunc itself, and another for the resolver:
(...)
12: 0000000000020060 104 FUNC GLOBAL DEFAULT 18 gnu_ifunc_resolver
(...)
16: 0000000000020060 104 GNU_IFUNC GLOBAL DEFAULT 18 gnu_ifunc
(...)
Both ifunc and resolver symbols have the same address/value, so
ppc64_elf_get_synthetic_symtab only creates a synthetic text symbol
for one of them. In the case above, it ends up being created for the
resolver, only:
(gdb) maint print msymbols
(...)
[ 7] t 0x980 .frame_dummy section .text
[ 8] T 0x9e4 .gnu_ifunc_resolver section .text
[ 9] T 0xa58 __glink_PLTresolve section .text
(...)
GDB needs to know when a program stepped into an ifunc resolver, so
that it can know whether to step past the resolver into the target
function without the user noticing. The way GDB does it is my
checking whether the current PC points to an ifunc symbol (since
resolver and ifunc have the same address by design).
The problem is then that ppc64_elf_get_synthetic_symtab never creates
the synchetic symbol for the ifunc, so GDB stops stepping at the
resolver (in a test added by the following patch):
(gdb) step
gnu_ifunc_resolver (hwcap=21) at gdb/testsuite/gdb.base/gnu-ifunc-lib.c:33
33 {
(gdb) FAIL: gdb.base/gnu-ifunc.exp: resolver_attr=1: resolver_debug=1: final_debug=0: step
After this commit, we get:
[ 8] i 0x9e4 .gnu_ifunc section .text
[ 9] T 0x9e4 .gnu_ifunc_resolver section .text
And stepping an ifunc call takes to the final function:
(gdb) step
0x00000000100009e8 in .final ()
(gdb) PASS: gdb.base/gnu-ifunc.exp: resolver_attr=1: resolver_debug=1: final_debug=0: step
An alternative to touching bfd I considered was for GDB to check
whether there's an ifunc data symbol / function descriptor that points
to the current PC, whenever the program stops, but discarded it
because we'd have to do a linear scan over .opd over an over to find a
matching function descriptor for the current PC. At that point I
considered caching that info, but quickly dismissed it as then that
has no advantage (memory or performance) over just creating the
synthetic ifunc text symbol in the first place.
I ran the binutils and ld testsuites on PPC64 ELFv1 (machine gcc110 on
the GCC compile farm), and saw no regressions. This commit is part of
a GDB patch series that includes GDB tests that fail without this fix.
bfd/ChangeLog:
2018-04-26 Pedro Alves <palves@redhat.com>
* elf64-ppc.c (ppc64_elf_get_synthetic_symtab): Don't consider
ifunc and non-ifunc symbols duplicates.
The size of the stack segment defaults to 32KB, and can be overridden
by defining the __stacksize symbol.
2018-04-25 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
bfd/
* elf32-arm.c (DEFAULT_STACK_SIZE): New.
(elf32_arm_always_size_sections): Create stack segment.
Define and handle TLS relocations for FDPIC in BFD and gas.
In gas, the new relocations are rejected if the --fdpic option was not
specified.
We also define the __tdata_start symbol to mark the start of the
.tdata section. This allows FDPIC static binaries to find the start of
.tdata section, since phdr->p_vaddr of TLS segment is not a valid
value for FDPIC.
2018-04-25 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
bfd/:
* bfd-in2.h (BFD_RELOC_ARM_TLS_GD32_FDPIC)
(BFD_RELOC_ARM_TLS_LDM32_FDPIC, BFD_RELOC_ARM_TLS_IE32_FDPIC): New
relocations.
* elf32-arm.c (elf32_arm_howto_table_2): Add R_ARM_TLS_GD32_FDPIC,
R_ARM_TLS_LDM32_FDPIC, R_ARM_TLS_IE32_FDPIC relocations.
(elf32_arm_reloc_map): Add R_ARM_TLS_GD32_FDPIC,
R_ARM_TLS_LDM32_FDPIC, R_ARM_TLS_IE32_FDPIC.
(struct elf32_arm_link_hash_table): Update comment.
(elf32_arm_final_link_relocate): Handle TLS FDPIC relocations.
(IS_ARM_TLS_RELOC): Likewise.
(elf32_arm_check_relocs): Likewise.
(allocate_dynrelocs_for_symbol): Likewise.
(elf32_arm_size_dynamic_sections): Update comment.
* reloc.c: Add BFD_RELOC_ARM_TLS_GD32_FDPIC,
BFD_RELOC_ARM_TLS_LDM32_FDPIC, BFD_RELOC_ARM_TLS_IE32_FDPIC.
gas/
* config/tc-arm.c (reloc_names): Add TLSGD_FDPIC, TLSLDM_FDPIC,
GOTTPOFF_FDIC relocations.
(md_apply_fix): Handle the new TLS FDPIC relocations.
(tc_gen_reloc): Likewise.
(arm_fix_adjustable): Likewise.
include/
* elf/arm.h: Add R_ARM_TLS_GD32_FDPIC, R_ARM_TLS_LDM32_FDPIC,
R_ARM_TLS_IE32_FDPIC.
ld/
* scripttempl/elf.sc: Define __tdata_start for .tdata section.
FDPIC requires special PLT entries, defined in this patch.
Note that lazy binding is not supported because of a race condition
for lack of an atomic 64-bits load instruction.
2018-04-25 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
bfd/
* elf32-arm.c (elf32_arm_fdpic_plt_entry): New.
(elf32_arm_create_dynamic_sections): Handle FDPIC.
(elf32_arm_allocate_plt_entry): Likewise.
(elf32_arm_populate_plt_entry): Likewise.
(elf32_arm_output_plt_map_1): Likewise.
ELF files targetting ARM FDPIC use the ELFOSABI_ARM_FDPIC flag.
Set it appropriately in file generators (eg. gas), and handle it in
readers (eg. readelf).
2018-04-25 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
bfd/
* elf32-arm.c (elf32_arm_print_private_bfd_data): Support
EF_ARM_PIC and ELFOSABI_ARM_FDPIC.
(elf32_arm_post_process_headers): Support ELFOSABI_ARM_FDPIC.
(ELF_OSABI): Define to ELFOSABI_ARM_FDPIC.
binutils/
* readelf.c (decode_ARM_machine_flags): Support EF_ARM_PIC.
(get_osabi_name): Support ELFOSABI_ARM_FDPIC.
gas/
* config/tc-arm.c (arm_fdpic): New.
(elf32_arm_target_format): Support FDPIC.
(OPTION_FDPIC): New.
(md_longopts): Support FDPIC.
(md_parse_option): Likewise.
(md_show_usage): Likewise.
include/
* elf/arm.h (EF_ARM_FDPIC): New.
This seems to work with gcc-8 and a bunch of prior gcc versions I tested.
* elf-linux-core.h: Disable gcc-8 string truncation warning.
* elf.c (elfcore_write_prpsinfo): Likewise.
The gcc warning has been fixed, and the patch regressed builds with
some older versions of gcc.
* elf-linux-core.h: Revert last change.
* elf.c: Likewise.
All of these warnings were false positives. -Wstringop-truncation is
particularly annoying when it warns about strncpy used quite correctly.
bfd/
* elf-linux-core.h (swap_linux_prpsinfo32_ugid32_out): Disable
gcc-8 string truncation warning.
(swap_linux_prpsinfo32_ugid16_out): Likewise.
(swap_linux_prpsinfo64_ugid32_out): Likewise.
(swap_linux_prpsinfo64_ugid16_out): Likewise.
* elf.c (elfcore_write_prpsinfo): Likewise.
gas/
* stabs.c (generate_asm_file): Use memcpy rather than strncpy.
Remove call to strlen inside loop.
* config/tc-cr16.c (getreg_image): Warning fix.
* config/tc-crx.c (getreg_image): Warning fix.
We were emitting dynamic relocs on the second word of a TLS GD GOT
entry pair (the dtprel offset), without the addend necessary when no
symbol is present on the dynamic reloc. Unfortunately the simple
solution of providing the proper addend doesn't work due to an hppa
glibc ld.so bug that ignores such addends. So instead optimize the
relocs. The dtprel offset is known at link time for locally defined
symbols (the only case where we'll end up with no symbol on a dynamic
reloc) so we can omit the dynamic reloc in that case.
Furthermore, we can omit a dynamic reloc on the first word of a TLS GD
GOT entry pair (the module id) if the symbol is local and we are
producing an executable. Similarly, a tprel reloc on a TLS IE GOT
entry is not needed for local symbols in an executable. So the
condition for TLS GOT relocs can become bfd_link_dll(info) rather than
bfd_link_pic(info) as needed for normal GOT relocs.
This all presumes hppa ld.so doesn't need to differentiate TLS GD GOT
pairs from TLS LD GOT pairs, which is currently true.
PR 22978
* elf32-hppa.c (got_relocs_needed): Add extra param to special
case both dtprel and tprel relocs.
(allocate_dynrelocs): Adjust conditions for got relocs.
(elf32_hppa_relocate_section): Likewise for local sym got relocs.
Emit dynamic relocs on TLS GOT entries for shared libraries,
not when pic. Omit dynamic reloc on dtprel entry when local,
and on tprel entry when local and executable.
The only stub type that makes sense for undefined symbols, or those
defined in shared libraries, is a plt call stub. This patch arranges
to have "destination" set to -1 on such symbols, making for an easy
test in hppa_type_of_stub.
PR 22537
* elf32-hppa.c (elf32_hppa_size_stubs): Init "destination" to -1.
(hppa_type_of_stub): Don't return a long branch stub for
symbols other than those defined statically.
Define elf32_bed and elf64_bed before including "elf32-target.h" and
"elf64-target.h" to avoid local elf32_bed and elf64_bed variables.
* elf32-i386.c (elf32_bed): Define before including
"elf32-target.h".
* elf64-x86-64.c (elf64_bed): Define before including
"elf64-target.h".
(elf32_bed): Define before including "elf32-target.h".
Use a normal input file with compatible relocation to hold linker
created sections,
PR ld/23055
* elfxx-x86.c (_bfd_x86_elf_link_setup_gnu_properties): Use a
normal input file with compatible relocation.
Andrew Sadek <andrew.sadek.se@gmail.com>
A new implemented feature in GCC Microblaze that allows Position
Independent Code to run using Data Text Relative addressing instead
of using Global Offset Table.
Its aim was to make 'PIC' more efficient and flexible as elf size
excess performance overhead were noticed when using GOT due to the
indirect addressing.
include/ChangeLog:
* bfdlink.h (Add flag): Add new flag @ 'bfd_link_info' struct.
* elf/microblaze.h (Add 3 new relocations):
R_MICROBLAZE_TEXTPCREL_64, R_MICROBLAZE_TEXTREL_64
and R_MICROBLAZE_TEXTREL_32_LO for relax function.
bfd/ChangeLog:
* bfd/reloc.c (2 new BFD relocations):
BFD_RELOC_MICROBLAZE_64_TEXTPCREL &
BFD_RELOC_MICROBLAZE_64_TEXTPCREL
* bfd/bfd-in2.h: Regenerate
* bfd/libbfd.h: Regenerate
* bfd/elf32-microblaze.c (Handle new relocs): define 'HOWTO' of 3
new relocs and handle them in both relocate and relax functions.
(microblaze_elf_reloc_type_lookup): add mapping between for new
bfd relocs.
(microblaze_elf_relocate_section): Handle new relocs in case of
elf relocation.
(microblaze_elf_relax_section): Handle new relocs for elf relaxation.
gas/ChangeLog:
* gas/config/tc-microblaze.c (Handle new relocs directives in
assembler): Handle new relocs from compiler output.
(imm_types): add new imm types for data text relative addressing
TEXT_OFFSET, TEXT_PC_OFFSET
(md_convert_frag): conversion for BFD_RELOC_MICROBLAZE_64_TEXTPCREL,
BFD_RELOC_MICROBLAZE_64_TEXTPCREL
(md_apply_fix): apply fix for BFD_RELOC_MICROBLAZE_64_TEXTPCREL,
BFD_RELOC_MICROBLAZE_64_TEXTPCREL
(md_estimate_size_before_relax): estimate size for
BFD_RELOC_MICROBLAZE_64_TEXTPCREL,
BFD_RELOC_MICROBLAZE_64_TEXTPCREL
(tc_gen_reloc): generate relocations for
BFD_RELOC_MICROBLAZE_64_TEXTPCREL,
BFD_RELOC_MICROBLAZE_64_TEXTPCREL
ld/ChangeLog:
* ld/lexsup.c (Add 2 ld options):
(ld_options): add disable-multiple-abs-defs @ 'ld_options' array
(parse_args): parse new option and pass flag to 'link_info' struct.
* ld/ldlex.h (Add enum): add new enum @ 'option_values' enum.
* ld/ld.texinfo (Add new option): Add description for
'disable-multiple-abs-defs'
* ld/main.c: Initialize flags with false @ 'main'. Handle
disable-multiple-abs-defs @ 'mutiple_definition'.
PR 23055
* aoutx.h (find_nearest_line): Check that the symbol name exists
and is long enough, before attempting to see if it is for a .o
file.
* hash.c (bfd_hash_hash): Add an assertion that the string is not
NULL.
* linker.c (bfd_link_hash_lookup): Fail if the table or string are
NULL.
(_bfd_generic_link_add_archive_symbols): Fail if an archive entry
has no name.
max-page-size only matters for demand paged executables or shared
libraries, and the ideal size is the largest value used by your
operating system. Values larger than necessary just waste file space
and memory. common-page-size also affects file and memory size,
trading a possible small increase in file size for a decrease in
memory size when the operating system is using a common-page-size
page. With a powerpc max-page-size of 64k and common-page-size of 4k
many executables will use no more memory pages when the system page
size is 4k than an executable linked with -z max-page-size=0x1000,
yet will still run on a system using 64k pages. However, when running
on a system using 64k pages relro protection will not be completely
effective.
Due to the relro problem, powerpc binutils has been using a default
common-page-size of 64k since 2014-12-18 (git commit 04c6a44c7),
leading to complaints about increased file and memory sizes. People
not using relro do have a valid reason to complain..
So this patch introduces an extra back-end value to use as the default
for common-page-size when generating relro executables, and enables
the support for powerpc. Non relro executables will now be generated
with a default common-page-size of 4k.
bfd/
* elf-bfd.h (struct elf_backend_data): Add relropagesize.
* elfxx-target.h (ELF_RELROPAGESIZE): Provide default and
sanity test.
(elfNN_bed): Init relropagesize.
* bfd.c (bfd_emul_get_commonpagesize): Add boolean param to
select relropagesize.
* elf32-ppc.c (ELF_COMMONPAGESIZE): Define as 0x1000.
(ELF_RELROPAGESIZE): Define as ELF_MAXPAGESIZE.
(ELF_MINPAGESIZE): Don't define.
* elf64-ppc.c (ELF_COMMONPAGESIZE): Define as 0x1000.
(ELF_RELROPAGESIZE): Define as ELF_MAXPAGESIZE.
* bfd-in2.h: Regenerate.
ld/
* ldmain.c (main): Move config.maxpagesize and
config.commonpagesize initialization to..
* ldemul.c (after_parse_default): ..here.
* testsuite/ld-powerpc/ppc476-shared.d: Pass -z common-page-size.
* testsuite/ld-powerpc/ppc476-shared2.d: Likewise.
The default max-page-size on ppc32 has been 64k since 1995-02-15 (git
commit bcbe2c71). There was a change committed 2003-07-12 to chose a
4k page if __QNXTARGET__ is defined, but that particular commit was
from an earlier posted patch
https://sourceware.org/ml/binutils/2003-07/msg00211.html that only
made the change effective for arm, rather than the later one
https://sourceware.org/ml/binutils/2003-07/msg00220.html that also
changed powerpc and sh..
Since the __QNXTARGET__ #ifdef in elf32-ppc.c is ineffective unless
the user defines it in his or her CFLAGS, I'm removing that code.
* elf32-ppc.c (ELF_MAXPAGESIZE, ELF_COMMONPAGESIZE): Don't depend
on __QNXTARGET__ define.
Enabling shared lib tests showed the powerpc-lynxos target is broken,
and has been for a long time. The breakage happened in a 2005-05-07
patch of mine, git commit 3b36f7e62, I think. There have been no bug
reports I recall so it seems the target is dead. powerpc-windiss is
similarly broken.
This patch fixes the breakage, and puts the targets on the obsolete
list.
bfd/
* config.bfd: Add powerpc-*-lynxos* and powerpc-*-windiss*
to obsolete list.
ld/
* emulparams/elf32ppcwindiss.sh: Rewrite to use elf32ppc.sh.
* emulparams/ppclynx.sh: Likewise.
Prevent a null BFD pointer dereference and a resulting segmentation
fault in `mips_elf64_write_rel' or `mips_elf64_write_rela':
Program received signal SIGSEGV, Segmentation fault.
0x0000000000437690 in mips_elf64_write_rela (abfd=0x71e130, sec=0x720700,
rela_hdr=0x721ff8, count=0x7fffffffb82c, data=0x7fffffffb88c)
at .../bfd/elf64-mips.c:4123
4123 if ((*ptr->sym_ptr_ptr)->the_bfd->xvec != abfd->xvec
4124 && ! _bfd_elf_validate_reloc (abfd, ptr))
in the MIPS64 (n64 MIPS) ELF backend whenever the STN_UNDEF symbol index
is retrieved from the `r_sym' field of a relocation seen in input while
running `objcopy' or `strip'. The reason for the null BFD pointer is
that internally in BFD an STN_UNDEF symbol reference resolves to an
absolute zero symbol that does not have a BFD associated. Check the
pointer then before using it, like the generic ELF backend does in
`elf_write_relocs'.
This complements the same change made for generic ELF bundled with:
commit e35765a9a2
Author: Ian Lance Taylor <ian@airs.com>
Date: Sun Dec 15 19:59:18 1996 +0000
which (obviously due to a CVS -> GIT repository conversion inaccuracy)
seems to be one corresponding to this ChangeLog entry:
* elfcode.h (write_relocs): Handle absolute symbol.
from:
commit c86158e591
Author: Ian Lance Taylor <ian@airs.com>
Date: Fri Aug 30 22:09:51 1996 +0000
("Add SH ELF support."), which also updated RELA only and not REL (which
has been since fixed with: commit 947216bf8f ("ELF reloc code tidy"),
<https://sourceware.org/ml/binutils/2002-11/msg00727.html>).
bfd/
* elf64-mips.c (mips_elf64_write_rel): Handle a NULL BFD pointer
in the BFD symbol referred by the relocation.
(mips_elf64_write_rela): Likewise.
Prevent an out-of-range access and a possible segmentation fault in
`mips_elf64_slurp_one_reloc_table':
Program received signal SIGSEGV, Segmentation fault.
mips_elf64_slurp_one_reloc_table (abfd=0x71bd90, asect=0x71cf70,
rel_hdr=<value optimized out>, reloc_count=1,
relents=<value optimized out>, symbols=0x7218c0, dynamic=0)
at .../bfd/elf64-mips.c:3758
3757 ps = symbols + rela.r_sym - 1;
3758 s = *ps;
in the MIPS64 (n64 MIPS) ELF backend whenever an invalid symbol index is
retrieved from the `r_sym' field of a relocation seen in input while
running `objcopy' or `strip'. Issue an error instead, like the generic
ELF backend does, taking code from `elf_slurp_reloc_table_from_section',
except for relocation types that do not refer to a symbol.
This complements commit 1f70368c21 ("Stop objdump crash on corrupt
reloc table"), <https://sourceware.org/ml/binutils/2002-09/msg00332.html>,
and commit 05a487dc8c ("make check fails on i686-linux-gnu"),
<https://sourceware.org/ml/binutils/2002-09/msg00340.html>, where the
generic ELF backend code comes from.
bfd/
* elf64-mips.c (mips_elf64_slurp_one_reloc_table): Issue an
error for out-of-range `r_sym' values.
This patch adds the analysis part of PLT call optimization, enabling
the code added with the previous patch that actually performs the
optimization.
Gold support is not available yet.
bfd/
* elf64-ppc.c (struct _ppc64_elf_section_data): Add has_pltcall field.
(struct ppc_link_hash_table): Add can_convert_all_inline_plt.
(ppc64_elf_check_relocs): Set has_pltcall.
(ppc64_elf_adjust_dynamic_symbol): Discard some PLT entries.
(ppc64_elf_inline_plt): New function.
(ppc64_elf_size_dynamic_sections): Discard some PLT entries for locals.
* elf64-ppc.h (ppc64_elf_inline_plt): Declare.
* elf32-ppc.c (has_pltcall): Define.
(struct ppc_elf_link_hash_table): Add can_convert_all_inline_plt.
(ppc_elf_check_relocs): Set has_pltcall.
(ppc_elf_inline_plt): New function.
(ppc_elf_adjust_dynamic_symbol): Discard some PLT entries.
(ppc_elf_size_dynamic_sections): Likewise.
* elf32-ppc.h (ppc_elf_inline_plt): Declare.
ld/
* emultempl/ppc64elf.em (no_inline_plt): New var.
(ppc_before_allocation): Call ppc64_elf_inline_plt.
(enum ppc64_opt): Add OPTION_NO_INLINE_OPT.
(PARSE_AND_LIST_LONGOPTS, PARSE_AND_LIST_OPTIONS,
PARSE_AND_LIST_ARGS_CASES): Handle --no-inline-optimize.
* emultemps/ppc32elf.em (no_inline_opt): New var.
(prelim_size_sections): New function, extracted from..
(ppc_before_allocation): ..here. Call ppc_elf_inline_plt.
(enum ppc32_opt): Add OPTION_NO_INLINE_OPT.
(PARSE_AND_LIST_LONGOPTS, PARSE_AND_LIST_OPTIONS,
PARSE_AND_LIST_ARGS_CASES): Handle --no-inline-optimize.
In addition to the existing relocs we need two more to mark all
instructions in the call sequence, PLTCALL on the call itself (plus
the toc restore insn for ppc64), and PLTSEQ on others. All
relocations in a particular sequence have the same symbol.
Example ppc64 ELFv2 assembly:
.reloc .,R_PPC64_PLTSEQ,puts
std 2,24(1)
addis 12,2,puts@plt@ha # .reloc .,R_PPC64_PLT16_HA,puts
ld 12,puts@plt@l(12) # .reloc .,R_PPC64_PLT16_LO_DS,puts
.reloc .,R_PPC64_PLTSEQ,puts
mtctr 12
.reloc .,R_PPC64_PLTCALL,puts
bctrl
ld 2,24(1)
Example ppc32 -fPIC assembly:
addis 12,30,puts+32768@plt@ha # .reloc .,R_PPC_PLT16_HA,puts+0x8000
lwz 12,12,puts+32768@plt@l # .reloc .,R_PPC_PLT16_LO,puts+0x8000
.reloc .,R_PPC_PLTSEQ,puts+32768
mtctr 12
.reloc .,R_PPC_PLTCALL,puts+32768
bctrl
Marking sequences like this allows the linker to convert them to nops
and a direct call if the target symbol turns out to be local.
When the call is __tls_get_addr, each relocation shown above is paired
with an R_PPC*_TLSLD or R_PPC*_TLSGD reloc to additionally mark the
sequence for possible TLS optimization. The TLSLD or TLSGD relocs are
emitted first.
include/
* elf/ppc.h (R_PPC_PLTSEQ, R_PPC_PLTCALL): Define.
* elf/ppc64.h (R_PPC64_PLTSEQ, R_PPC64_PLTCALL): Define.
bfd/
* elf32-ppc.c (ppc_elf_howto_raw): Add PLTSEQ and PLTCALL howtos.
(is_plt_seq_reloc): New function.
(ppc_elf_check_relocs): Handle PLTSEQ and PLTCALL relocs.
(ppc_elf_tls_optimize): Handle inline plt call sequence.
(ppc_elf_relax_section): Handle PLTCALL reloc.
(ppc_elf_relocate_section): Nop out inline plt call sequence when
resolving locally.
* elf64-ppc.c (ppc64_elf_howto_raw): Add R_PPC64_PLTSEQ and
R_PPC64_PLTCALL entries. Comment R_PPC64_TOCSAVE.
(has_tls_get_addr_call): Correct comment.
(is_branch_reloc): Add PLTCALL.
(is_plt_seq_reloc): New function.
(ppc64_elf_check_relocs): Handle PLT16_LO_DS reloc. Set
has_tls_reloc for R_PPC64_TLSGD and R_PPC64_TLSLD. Create plt
entry for R_PPC64_PLTCALL.
(ppc64_elf_tls_optimize): Handle inline plt call sequence.
(ppc_type_of_stub): Handle PLTCALL reloc.
(toc_adjusting_stub_needed): Likewise.
(ppc64_elf_relocate_section): Set "can_plt_call" for PLTCALL
reloc insn. Nop out inline plt call sequence when resolving
locally. Handle __tls_get_addr inline plt call optimization.
elfcpp/
* powerpc.h (R_POWERPC_PLTSEQ, R_POWERPC_PLTCALL): Define.
gold/
* powerpc.cc (Target_powerpc::Track_tls::maybe_skip_tls_get_addr_call):
Handle inline plt sequence relocs.
(Stub_table::Plt_stub_key::Plt_stub_key): Likewise.
(Target_powerpc::Scan::reloc_needs_plt_for_ifunc): Likewise.
(Target_powerpc::Relocate::relocate): Likewise.
Necessary if gcc is to use PLT16 relocs to implement -mlongcall, and
there isn't a good technical reason why local symbols should be
excluded from PLT16 support. Non-ifunc local symbol PLT entries go in
a separate section to other PLT entries. In a fixed position
executable they won't need to be relocated, and in a PIE or shared
library I chose to not implement lazy relocation.
bfd/
* elf64-ppc.c (LOCAL_PLT_ENTRY_SIZE): Define.
(struct ppc_stub_hash_entry): Add symtype field.
(PLT_KEEP): Define.
(struct ppc_link_hash_table): Add pltlocal and relpltlocal.
(create_linkage_sections): Create pltlocal and relpltlocal.
(ppc64_elf_check_relocs): Allow PLT relocs on local symbols.
Set PLT_KEEP.
(ppc64_elf_adjust_dynamic_symbol): Keep PLT entries for inline calls.
(allocate_dynrelocs): Allocate pltlocal and relpltlocal.
(ppc64_elf_size_dynamic_sections): Size pltlocal and relpltlocal.
Keep PLT entries for inline calls against locals.
(ppc_build_one_stub): Use pltlocal as appropriate.
(ppc_size_one_stub): Likewise.
(ppc64_elf_size_stubs): Set symtype.
(build_global_entry_stubs_and_plt): Init pltlocal and write
relpltlocal for globals.
(write_plt_relocs_for_local_syms): Likewise for local syms.
(ppc64_elf_relocate_section): Support PLT for local syms.
* elf32-ppc.c (PLT_KEEP): Define.
(struct ppc_elf_link_hash_table): Add pltlocal and relpltlocal.
(ppc_elf_create_glink): Create pltlocal and relpltlocal.
(ppc_elf_check_relocs): Allow PLT relocs on local symbols.
Set PLT_KEEP. Adjust update_local_sym_info call.
(ppc_elf_adjust_dynamic_symbol): Keep PLT entries for inline calls.
(allocate_dynrelocs): Allocate pltlocal and relpltlocal.
(ppc_elf_size_dynamic_sections): Size pltlocal and relpltlocal.
(ppc_elf_relocate_section): Support PLT16 relocs for local syms.
(write_global_sym_plt): Init pltlocal and write relpltlocal.
(ppc_finish_symbols): Likewise for locals.
ld/
* emulparams/elf32ppc.sh (OTHER_RELRO_SECTIONS_2): Add .branch_lt.
(OTHER_GOT_RELOC_SECTIONS): Add .rela.branch_lt.
* testsuite/ld-powerpc/elfv2so.d: Update for symbol/stub reordering.
* testsuite/ld-powerpc/relbrlt.d: Likewise.
* testsuite/ld-powerpc/relbrlt.s: Likewise.
* testsuite/ld-powerpc/tlsso.r: Likewise.
* testsuite/ld-powerpc/tlstocso.r: Likewise.
gold/
* powerpc.cc (Target_powerpc::lplt_): New variable.
(Target_powerpc::lplt_section): Associated accessor.
(Target_powerpc::plt_off): Handle local non-ifunc symbols.
(Target_powerpc::make_lplt_section): New function.
(Target_powerpc::make_local_plt_entry): New function.
(Powerpc_relobj::do_relocate_sections): Write out lplt.
(Output_data_plt_powerpc::first_plt_entry_offset): Zero for lplt.
(Output_data_plt_powerpc::add_local_entry): New function.
(Output_data_plt_powerpc::do_write): Ignore lplt.
(Target_powerpc::make_iplt_section): Make lplt first.
(Target_powerpc::make_brlt_section): Make .branch_lt relro.
(Target_powerpc::Scan::local): Handle PLT16 relocs.
The current scheme where we output PLT relocs for global symbols in
finish_dynamic_symbol, and PLT relocs for local symbols when
outputting stubs does not work if PLT entries are to be used for
inline PLT sequences against non-dynamic globals or local symbols.
bfd/
* elf64-ppc.c (ppc_build_one_stub): Move output of PLT relocs
for local symbols to..
(write_plt_relocs_for_local_syms): ..here. New function.
(ppc64_elf_finish_dynamic_symbol): Move output of PLT relocs for
global symbols to..
(build_global_entry_stubs_and_plt): ..here. Rename from
build_global_entry_stubs.
(ppc64_elf_build_stubs): Always call build_global_entry_stubs_and_plt.
Call write_plt_relocs_for_local_syms.
* elf32-ppc.c (get_sym_h): New function.
(ppc_elf_relax_section): Use get_sym_h.
(ppc_elf_relocate_section): Move output of PLT relocs and glink
stubs for local symbols to..
(ppc_finish_symbols): ..here. New function.
(ppc_elf_finish_dynamic_symbol): Move output of PLT relocs for
global syms to..
(write_global_sym_plt): ..here. New function.
* elf32-ppc.h (ppc_elf_modify_segment_map): Delete attribute.
(ppc_finish_symbols): Declare.
ld/
* ppc32elf.em (ppc_finish): Call ppc_finish_symbols.
The PowerPC64 ELFv2 ABI and the PowerPC SysV ABI support a number of
relocations that can be used to create and access a PLT entry.
However, the relocs are not well defined. The PLT16 family of relocs
talk about "the section offset or address of the procedure linkage
table entry". It's plain that we do need a relative address when PIC
as otherwise we'd have dynamic text relocations, but "section offset"
doesn't specify which section. The most obvious one, ".plt", isn't
that useful because there is no readily available way of addressing
the start of the ".plt" section. Much more useful would be "the
GOT/TOC-pointer relative offset of the procedure linkage table entry",
and I suppose you could argue that is a "section offset" of sorts.
For PowerPC64 it is better to use the same TOC-pointer relative
addressing even when non-PIC, since ".plt" may be located outside the
range of a 32-bit address. However, for ppc32 we do want an absolute
address when non-PIC as a GOT pointer may not be set up. Also, for
ppc32 PIC we have a similar situation to R_PPC_PLTREL24 in that the
GOT pointer is set to a location in the .got2 section and we need to
specify the .got2 offset in the PLT16 reloc addend.
This patch supports PLT16 relocations using these semantics. This is
not an ABI change for ppc32 since the relocations were not previously
supported by GNU ld, but is for ppc64 where some of the PLT16 relocs
were supported. I'm not particularly concerned since the old ppc64
PLT16 reloc semantics made them almost completely useless.
bfd/
* elf32-ppc.c (ppc_elf_check_relocs): Handle PLT16 relocs.
(ppc_elf_relocate_section): Likewise.
* elf64-ppc.c (ppc64_elf_check_relocs): Handle PLT16_LO_DS.
(ppc64_elf_relocate_section): Likewise. Correct PLT16
resolution to plt entry relative to toc pointer.
gold/
* powerpc.cc (Target_powerpc::plt_off): New functions.
(is_plt16_reloc): New function.
(Stub_table::plt_off): Use Target_powerpc::plt_off.
(Stub_table::plt_call_size): Use plt_off.
(Stub_table::do_write): Likewise.
(Target_powerpc::Scan::get_reference_flags): Return RELATIVE_REF
for PLT16 relocations.
(Target_powerpc::Scan::reloc_needs_plt_for_ifunc): Return true
for PLT16 relocations.
(Target_powerpc::Scan::global): Make a PLT entry for PLT16 relocations.
(Target_powerpc::Relocate::relocate): Support PLT16 relocations.
(Powerpc_scan_relocatable_reloc::global_strategy): Return RELOC_SPECIAL
for ppc32 plt16 relocs.
It is possible to construct indirect calls to __tls_get_addr in
assembly that confuse TLS optimization. (PowerPC gcc doesn't support
such calls, ignoring -mlongcall for __tls_get_addr.) This patch fixes
the problem by requiring a TLSLD or TLSGD marker reloc before any insn
in an indirect call to __tls_get_addr will be optimized. They also
need additional marker relocs defined in a later patch, so don't
expect the optimization to work just yet. The point here is to
prevent mis-optimization of indirect calls without any marker relocs.
The presense of a marker reloc is tracked by a new bit in the tls_mask
field of ppc_link_hash_entry and the corresponding lgot_masks unsigned
char array for local symbols. Since the field is only 8 bits, we've
run out of space. However, tracking TLS use for variables, and
tracking IFUNC for functions are independent, and bits can be reused.
TLS_TLS is always set for TLS usage, so can be used to select the
meaning of the other bits. This patch does that even for elf32-ppc.c
which hasn't yet run out of space in the field.
* elf64-ppc.c (TLS_TLS, TLS_GD, TLS_LD, TLS_TPREL, TLS_DTPREL,
TLS_TPRELGD, TLS_EXPLICIT): Renumber. Test TLS_TLS throughout
file when other TLS flags are tested in a mask.
(TLS_MARK, NON_GOT): Define.
(PLT_IFUNC): Redefine, and test TLS_TLS throughout file as well.
(update_local_sym_info): Don't create got entry when NON_GOT.
(ppc64_elf_check_relocs): Pass NON_GOT with PLT_IFUNC.
Set TLS_MARK.
(get_tls_mask): Do toc lookup if tls_mask is just TLS_MARK.
(ppc64_elf_relocate_section): Likewise.
(ppc64_elf_tls_optimize): Don't attempt to optimize indirect
__tls_get_addr calls lacking a marker reloc.
* elf32-ppc.c (TLS_TLS, TLS_GD, TLS_LD, TLS_TPREL, TLS_DTPREL,
TLS_TPRELGD): Renumber. Update comment.
(TLS_MARK, NON_GOT): Define.
(PLT_IFUNC): Redefine, and test TLS_TLS throughout file as well.
(update_local_sym_info): Don't create got entry when NON_GOT.
(ppc_elf_check_relocs): Pass NON_GOT with PLT_IFUNC.
Set TLS_MARK.
(ppc_elf_tls_optimize): Don't attempt to optimize indirect
__tls_get_addr calls lacking a marker reloc.