2013-02-09 Jürgen Urban <JuergenUrban@gmx.de>
* config/tc-mips.c (CPU_HAS_LDC1_SDC1): New macro.
(macro): Use it. Assert that trunc.w.s is not used for r5900.
opcodes/
2013-02-09 Jürgen Urban <JuergenUrban@gmx.de>
* mips-opc.c (mips_builtin_opcodes): Enable l.d and s.d macros for
single-float. Disable ll, lld, sc and scd for EE. Disable the
trunc.w.s macro for EE.
gas/testsuite/
2013-02-09 Jürgen Urban <JuergenUrban@gmx.de>
* gas/mips/24k-triple-stores-2.d, gas/mips/24k-triple-stores-2.s,
gas/mips/micromips@24k-triple-stores-2.d: Move "sc" tests to...
* gas/mips/24k-triple-stores-2-llsc.d,
gas/mips/24k-triple-stores-2-llsc.s,
gas/mips/micromips@24k-triple-stores-2-llsc.d: ...these new tests.
* gas/mips/r5900-full.d, gas/mips/r5900-full.s: Verify that the
MIPS ISA level can be upgraded to support ll, sc, lld and scd.
* gas/mips/l_d-single.d, gas/mips/s_d-single.d,
gas/mips/r5900-nollsc.l, gas/mips/r5900-nollsc.s: New tests.
* gas/mips/mips.exp: Update accordingly. Add "nollsc" to r5900
properties.
* bfd-in2.h: Add support for MIPS r5900
* config.bfd: Add support for Sony Playstation 2
* cpu-mips.c: Add support for MIPS r5900
* elfxx-mips.c: Add support for MIPS r5900 (extension of r4000)
* config/tc-mips.c: Add support for MIPS r5900
Add M_LQ_AB and M_SQ_AB to support large values for instructions lq and sq.
* config/tc-mips.c (can_swap_branch_p, get_append_method): Detect some conditional short loops to fix a bug on the r5900 by NOP in the branch delay slot.
* config/tc-mips.c (M_MUL): Support 3 operands in multu on r5900.
* config/tc-mips.c (M_TRUNCWS): Support trunc.w.s on r5900 in MIPS ISA I.
* config/tc-mips.c (s_mipsset): Force 32 bit floating point on r5900.
* configure.in: Detect CPU type when target string contains r5900 (e.g. mips64r5900el-linux-gnu).
* config/tc-mips.c (mips_ip): Check parameter range of instructions mfps and mtps on r5900.
* elf/mips.h: Add MIPS machine variant number for r5900 which is compatible with old Playstation 2 software.
* opcode/mips.h: Add support for r5900 instructions including lq and sq.
* configure.tgt: Support ELF files for Sony Playstation 2 (for ps2dev and ps2sdk).
* emulparams/elf32lr5900n32.sh: Create linker script for Sony Playstation 2 ELF files using MIPS ABI n32.
* emulparams/elf32lr5900.sh: Create linker script for Sony Playstation 2 ELF files using MIPS ABI o32.
* Makefile.am: Add linker scripts for Sony Playstation 2 ELF files.
* opcodes/mips-dis.c: Add names for CP0 registers of r5900.
* opcodes/mips-opc.c: Add M_SQ_AB and M_LQ_AB to support larger range for instructions sq and lq.
* opcodes/mips-opc.c: Add support for MIPS r5900 CPU.
Add support for 128 bit MMI (Multimedia Instructions).
Add support for EE instructions (Emotion Engine).
Disable unsupported floating point instructions (64 bit and undefined compare operations).
Enable instructions of MIPS ISA IV which are supported by r5900.
Disable 64 bit co processor instructions.
Disable 64 bit multiplication and division instructions.
Disable instructions for co-processor 2 and 3, because these are not supported (preparation for later VU0 support (Vector Unit)).
Disable cvt.w.s because this behaves like trunc.w.s and the correct execution can't be ensured on r5900.
Add trunc.w.s using the opcode encoding of cvt.w.s on r5900. This will confuse less developers and compilers.
2011-12-08 Andrew Pinski <apinski@cavium.com>
Adam Nemet <anemet@caviumnetworks.com>
* archures.c (bfd_mach_mips_octeon2): New macro
* bfd-in2.h: Regenerate.
* cpu-mips.c (I_mipsocteon2): New enum value.
(arch_info_struct): Add bfd_mach_mips_octeon2.
* elfxx-mips.c (_bfd_elf_mips_mach): Support E_MIPS_MACH_OCTEON2.
(mips_set_isa_flags): Add bfd_mach_mips_octeon2.
(mips_mach_extensions): Add bfd_mach_mips_octeon2.
gas:
2011-12-08 Andrew Pinski <apinski@cavium.com>
Adam Nemet <anemet@caviumnetworks.com>
* tc-mips.c (CPU_IS_OCTEON): Add Octeon2.
(mips_cpu_info_table): Add Octeon2.
* doc/c-mips.texi: Document octeon2 as an acceptable value for -march=.
gas/testsuite:
2011-12-08 Andrew Pinski <apinski@cavium.com>
Adam Nemet <anemet@caviumnetworks.com>
* gas/mips/mips.exp: Add Octeon2 for an architecture.
Run octeon2 test.
* gas/mips/octeon2.d: New file.
* gas/mips/octeon2.s: New file.
include/opcode:
2011-12-08 Andrew Pinski <apinski@cavium.com>
Adam Nemet <anemet@caviumnetworks.com>
* mips.h (INSN_CHIP_MASK): Update according to INSN_OCTEON2.
(INSN_OCTEON2): New macro.
(CPU_OCTEON2): New macro.
(OPCODE_IS_MEMBER): Add Octeon2.
opcodes:
2011-12-08 Andrew Pinski <apinski@cavium.com>
Adam Nemet <anemet@caviumnetworks.com>
* mips-dis.c (mips_arch_choices): Add Octeon2.
For "octeon+", just include OcteonP for the insn.
* mips-opc.c (IOCT): Include Octeon2.
(IOCTP): Include Octeon2.
(IOCT2): New macro.
(mips_builtin_opcodes): Add "laa", "laad", "lac", "lacd", "lad",
"ladd", "lai", "laid", "las", "lasd", "law", "lawd".
Move "lbux", "ldx", "lhx", "lwx", and "lwux" up to where the standard
loads are, and add IOCT2 to them.
Add "lbx" and "lhux".
Add "qmac.00", "qmac.01", "qmac.02", "qmac.03", "qmacs.00",
"qmacs.01", "qmacs.01", "qmacs.02" and "qmacs.03".
Add "zcb" and "zcbt".
2011-11-29 Andrew Pinski <apinski@cavium.com>
* mips-dis.c (mips_arch_choices): Add Octeon+.
* mips-opc.c (IOCT): Include Octeon+.
(IOCTP): New macro.
(mips_builtin_opcodes): Add "saa" and "saad".
bfd/
2011-11-29 Andrew Pinski <apinski@cavium.com>
* archures.c (bfd_mach_mips_octeonp): New macro.
* bfd-in2.h: Regenerate.
* bfd/cpu-mips.c (I_mipsocteonp): New enum value.
(arch_info_struct): Add bfd_mach_mips_octeonp.
* elfxx-mips.c (mips_set_isa_flags): Add bfd_mach_mips_octeonp.
(mips_mach_extensions): Add bfd_mach_mips_octeonp.
include/opcodes/
2011-11-29 Andrew Pinski <apinski@cavium.com>
* mips.h (INSN_CHIP_MASK): Update according to INSN_OCTEONP.
(INSN_OCTEONP): New macro.
(CPU_OCTEONP): New macro.
(OPCODE_IS_MEMBER): Add Octeon+.
(M_SAA_AB, M_SAAD_AB, M_SAA_OB, M_SAAD_OB): New enum values.
gas/
2011-11-29 Andrew Pinski <apinski@cavium.com>
* config/tc-mips.c (CPU_IS_OCTEON): New macro function.
(CPU_HAS_SEQ): Change to use CPU_IS_OCTEON.
(NO_ISA_COP): Likewise.
(macro) <ld_st>: Add support when off0 is true.
Add support for M_SAA_AB, M_SAA_OB, M_SAAD_OB and M_SAAD_AB.
(mips_cpu_info_table): Add octeon+.
* doc/c-mips.texi: Document octeon+ as an acceptable value for -march=.
gas/testsuite/
2011-11-29 Andrew Pinski <apinski@cavium.com>
* gas/mips/mips.exp: Add octeon+ for an architecture.
Run octeon-saa-saad test.
(run_dump_test_arch): For Octeon architectures, also try octeon@.
* gas/mips/octeon-pref.d: Remove -march=octeon from command line.
* gas/mips/octeon.d: Likewise.
* gas/mips/octeon-saa-saad.d: New file.
* gas/mips/octeon-saa-saad.s: New file
2011-07-24 Maciej W. Rozycki <macro@codesourcery.com>
* mips.h (INSN_TRAP): Rename to...
(INSN_NO_DELAY_SLOT): ... this.
(INSN_SYNC): Remove macro.
gas/
2011-07-24 Maciej W. Rozycki <macro@codesourcery.com>
* config/tc-mips.c (can_swap_branch_p): Adjust for the rename of
INSN_TRAP to INSN_NO_DELAY_SLOT. Remove the check for INSN_SYNC
as well as explicit checks for ERET and DERET when scheduling
branch delay slots.
opcodes/
2011-07-24 Maciej W. Rozycki <macro@codesourcery.com>
* mips-opc.c (NODS): New macro.
(TRAP): Adjust for the rename of INSN_TRAP to INSN_NO_DELAY_SLOT.
(DSP_VOLA): Likewise.
(mips_builtin_opcodes): Add NODS annotation to "deret" and
"eret". Replace INSN_SYNC with NODS throughout. Use NODS in
place of TRAP for "wait", "waiti" and "yield".
* mips16-opc.c (NODS): New macro.
(TRAP): Adjust for the rename of INSN_TRAP to INSN_NO_DELAY_SLOT.
(mips16_opcodes): Use NODS in place of TRAP for "jalrc", "jrc",
"restore" and "save".
* mips-opc.c (mips_builtin_opcodes): Correct register use
annotation of "alnv.ps".
gas/testsuite/
* gas/mips/alnv_ps-swap.d: New test for ALNV.PS instruction
branch swapping.
* gas/mips/alnv_ps-swap.s: Source for the new test.
* gas/mips/mips.exp: Run the new test.
2010-12-03 Mingming Sun <mingm.sun@gmail.com>
* mips-opc.c: (mips_builtin_opcodes): Add loongson3a mul/div and
fixed point instructions.
gas/testsuite/
2010-12-03 Mingming Sun <mingm.sun@gmail.com>
* gas/mips/loongson-3a.s, gas/mips/loongson-3a.d: New test.
* gas/mips/mips.exp: Run it.
* mips-opc.c (mips_builtin_opcodes): Move M_LD_OB and M_SD_OB
macros before their corresponding MIPS III hardware instructions.
gas/
* config/tc-mips.c (macro)[M_LD_OB, M_SD_OB]: Handle 64-bit ABIs.
gas/testsuite/
* gas/mips/lineno.s: Convert to o32.
* gas/mips/lineno.d: Adjust patterns accordingly. Force the o32
ABI.
* mips-opc.c (mips_builtin_opcodes): Add "sync_acquire",
"sync_mb", "sync_release", "sync_rmb" and "sync_wmb".
gas/testsuite/
* gas/mips/mips32r2-sync.d: New test for MIPS32r2 "sync"
instruction variants.
* gas/mips/octeon@mips32r2-sync.d: Likewise, Octeon version.
* gas/mips/mips32r2-sync.s: Source for the new test.
* gas/mips/mips.exp: Run the new test.
David Ung <davidu@mips.com>
* mips-opc.c: Change membership to I1 for instructions ssnop and
ehb.
2010-05-26 Catherine Moore <clm@codesoucery.com>
Maxim Kuvyrkov <maxim@codesourcery.com>
* gas/mips/set-arch.d: Expect ehb.
* mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific
dmfc2 and dmtc2 before the architecture-level variants.
gas/testsuite/
* gas/mips/octeon.s: Add more tests for dmfc2 and dmtc2.
* gas/mips/octeon.d: Update.
* gas/mips/octeon-ill.l: Update error message.
* mips-opc.c (synciobdma, syncs, syncw, syncws): Move these
before sync.
(sync): New instruction with 5-bit sync type.
* mips-dis.c (print_insn_args: Add case '1' to print 5-bit values.
(mips_builtin_opcodes): Mark c0, c2 and c3 as CP. Add Octeon to the
membership of di, dmfc0, dmtc0, ei, mfc0 and mtc0. Add dmfc2 and
dmtc2 Octeon instructions.
(OP_SH_SEQI, OP_MASK_SEQI): New bit mask and shift count for SEQI.
opcodes/
* mips-dis.c (print_insn_args): Handle field descriptor +Q.
* mips-opc.c (mips_builtin_opcodes): Add Octeon instructions seq,
seqi, sne and snei.
gas/
* config/tc-mips.c (validate_mips_insn): Handle field descriptor +Q.
(mips_ip): Likewise.
(macro_build): Likewise.
(CPU_HAS_SEQ): New macro.
(macro2) <M_SEQ_I, M_SNE_I>: Use it. Emit seq/sne and seqi/snei.
gas/testsuite/
* gas/mips/octeon.s, gas/mips/octeon.d: Add tests for seq* and sne*.
* gas/mips/octeon-ill.s, gas/mips/octeon-ill.s: Add tests for seqi
and snei.
instructions FP_S. Mark l.s, li.s, lwc1, swc1, s.s, trunc.w.s and
cop1 macros INSN2_M_FP_S. Mark l.d, li.d, ldc1 and sdc1 macros
INSN2_M_FP_D. Mark trunc.w.d macro INSN2_M_FP_S and INSN2_M_FP_D.
* mips.h (INSN_ISA*): Redefine certain values as an
enumeration. Update comments.
(mips_isa_table): New.
(ISA_MIPS*): Redefine to match enumeration.
(OPCODE_IS_MEMBER): Modify to correctly test new INSN_ISA*
values.
opcodes/
* mips-opc.c (I3_32, I3_33, I4_32, I4_33, I5_33): New.
(mips_builtin_opcodes): Use these new I* values.
2007-10-04 David Daney <ddaney@avtrex.com>
* mips-opc.c (mips_builtin_opcodes): Mark lwxc1 as working on FP_S
registers.
gas/testsuite/
2007-10-04 David Daney <ddaney@avtrex.com>
* gas/mips/odd-float.d, gas/mips/odd-float.s: New test.
* gas/mips/mips.exp: Run it.
* config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
(macro_build): Add case '2'.
(macro): Expand M_BALIGN to nop, packrl.ph or balign.
(validate_mips_insn): Add support for balign instruction.
(mips_ip): Handle DSP R2 instructions. Support balign instruction.
(OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
command line options.
(s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
(md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
* doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
.set dspr2, .set nodspr2.
[ gas/testsuite/ChangeLog ]
* gas/mips/mips32-dspr2.s, gas/mips/mips32-dspr2.d: New test for
DSP R2.
* gas/mips/mips.exp: Run new test.
[ include/opcode/Changelog ]
* mips.h (OP_SH_BP, OP_MASK_BP): Add support for balign instruction.
(INSN_DSPR2): Add flag for DSP R2 instructions.
(M_BALIGN): New macro.
[ opcodes/ChangeLog ]
* mips-dis.c (mips_arch_choices): Add DSP R2 support.
(print_insn_args): Add support for balign instruction.
* mips-opc.c (D33): New shortcut for DSP R2 instructions.
(mips_builtin_opcodes): Add DSP R2 instructions.
[ sim/mips/ChangeLog ]
* Makefile.in (IGEN_INCLUDE): Add dsp2.igen.
* configure.ac (mips*-sde-elf*, mipsisa32r2*-*-*, mipsisa64r2*-*-*):
Add dsp2 to sim_igen_machine.
* configure: Regenerate.
* dsp.igen (do_ph_op): Add MUL support when op = 2.
(do_ph_mulq): New function to support mulq_rs.ph and mulq_s.ph.
(mulq_rs.ph): Use do_ph_mulq.
(MFHI, MFLO, MTHI, MTLO): Move these instructions to mips.igen.
* mips.igen: Add dsp2 model and include dsp2.igen.
(MFHI, MFLO, MTHI, MTLO): Extend these instructions for
for *mips32r2, *mips64r2, *dsp.
(MADD, MADDU, MSUB, MSUBU, MULT, MULTU): Extend these instructions
for *mips32r2, *mips64r2, *dsp2.
* dsp2.igen: New file for MIPS DSP REV 2 ASE.
[ sim/testsuite/sim/mips/ChangeLog ]
* basic.exp: Run the dsp2 test.
* utils-dsp.inc (dspckacc_astio, dspck_tsimm): New macro.
* mips32-dsp2.s: New test.
2006-04-30 Thiemo Seufer <ths@mips.com>
David Ung <davidu@mips.com>
* config/tc-mips.c (validate_mips_insn): Handling of udi cases.
(mips_immed): New table that records various handling of udi
instruction patterns.
(mips_ip): Adds udi handling.
[ include/opcode/ChangeLog ]
2006-04-30 Thiemo Seufer <ths@mips.com>
David Ung <davidu@mips.com>
* mips.h: Defines udi bits and masks. Add description of
characters which may appear in the args field of udi
instructions.
[ opcodes/ChangeLog ]
2006-04-30 Thiemo Seufer <ths@mips.com>
David Ung <davidu@mips.com>
* mips-opc.c (mips_builtin_opcodes): Add udi instructions
"udi0" to "udi15".
* mips-dis.c (print_insn_args): Adds udi argument handling.
(mips_builtin_opcodes): Move "bc0f", "bc0fl", "bc0t", "bc0tl" to the
bottom to avoid opcode collision with "mftr" and "mttr".
Add MT instructions.
* mips-dis.c (mips_arch_choices): Enable INSN_MT for mips32r2.
(print_insn_args): Add supports for +t, +T, !, $, *, &, g operand
formats.
* mips-dis.c (no_aliases): New disassembly option flag.
(set_default_mips_dis_options): Init no_aliases to zero.
(parse_mips_dis_option): Handle no-aliases option.
(print_insn_mips): Ignore table entries that are aliases
if no_aliases is set.
(print_insn_mips16): Ditto.
* mips-opc.c (mips_builtin_opcodes): Add initializer column for
new pinfo2 member and add INSN_ALIAS initializers as needed. Also
move WR_MACC and RD_MACC initializers from pinfo to pinfo2.
* mips16-opc.c (mips16_opcodes): Ditto.
* mips-opc.c (mips_builtin_opcodes): Move coprocessor 2
move/branch operations to the bottom so that VR5400 multimedia
instructions take precedence in disassembly.
gas/testsuite/
* gas/mips/vr5400.d: Update for a correct disassembly of
"racm.ob".
* mips-opc.c (mips_builtin_opcodes): Remove the MIPS32
ISA-specific "break" encoding.
gas/testsuite/
* gas/mips/mips32.s: Adjust for the unified "break" syntax. Add
another "break" case. Update the comment accordingly.
* gas/mips/set-arch.s: Likewise.
* gas/mips/mips32.d: Adjust for the new output.
* gas/mips/set-arch.d: Likewise.
Richard Sandiford
Nick Clifton
Maciej W. Rozycki
Andrew Pinski
Chao-ying Fu
Catherine Moore
Alan Modra
Adam Nemet
Joseph Myers
Mark Shinwell
David Daney
Thiemo Seufer
David Ung
Fred Fish