For PLT expressions, we should subtract the PLT relocation size only for
jump instructions. Since PLT relocations are PC relative, we only allow
"symbol@PLT" in PLT expression.
gas/
PR gas/23997
* config/tc-i386.c (x86_cons): Check for invalid PLT expression.
(md_apply_fix): Subtract the PLT relocation size only for jump
instructions.
* testsuite/gas/i386/reloc32.s: Add test for invalid PLT
expression.
* testsuite/gas/i386/reloc64.s: Likewise.
* testsuite/gas/i386/ilp32/reloc64.s: Likewise.
* testsuite/gas/i386/reloc32.l: Updated.
* testsuite/gas/i386/reloc64.l: Likewise.
* testsuite/gas/i386/ilp32/reloc64.l: Likewise.
ld/
PR gas/23997
* testsuite/ld-i386/i386.exp: Run PR gas/23997 test.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-x86-64/pr23997a.s: New file.
* testsuite/ld-x86-64/pr23997b.c: Likewise.
* testsuite/ld-x86-64/pr23997c.c: Likewise.
Linkers group input note sections with the same name into one output
note section with the same name. One output note section is placed in
one PT_NOTE segment. New linkers merge all input .note.gnu.property
sections into one output .note.gnu.property section with a single
NT_GNU_PROPERTY_TYPE_0 note in a single PT_NOTE segment. Since older
linkers treat input .note.gnu.property section as a generic note section
and just concatenate all input .note.gnu.property sections into one
output .note.gnu.property section without merging them, we may
see one or more NT_GNU_PROPERTY_TYPE_0 notes in PT_NOTE segment, which
are invalid.
GNU_PROPERTY_X86_UINT32_VALID was defined to address this issue such
that linker sets the bit for non-relocatable outputs. But it isn't
sufficient:
1. It doesn't cover generic properties.
2. When -mx86-used-note=yes is passed to x86 assembler, the
GNU_PROPERTY_X86_UINT32_VALID bit is set in GNU_PROPERTY_X86_ISA_1_USED
property in object file and older linkers generate invalid
NT_GNU_PROPERTY_TYPE_0 notes with the GNU_PROPERTY_X86_UINT32_VALID bit
set.
I am proposing the following changes:
1. Add PT_GNU_PROPERTY segment type:
# define PT_GNU_PROPERTY (PT_LOOS + 0x474e553)
which covers .note.gnu.property section.
2. Remove GNU_PROPERTY_X86_UINT32_VALID.
bfd/
PR ld/23900
* elf.c (get_program_header_size): Add a PT_GNU_PROPERTY
segment for NOTE_GNU_PROPERTY_SECTION_NAME.
(_bfd_elf_map_sections_to_segments): Create a PT_GNU_PROPERTY
segment for NOTE_GNU_PROPERTY_SECTION_NAME.
* elfxx-x86.c (_bfd_elf_link_setup_gnu_properties): Don't set
GNU_PROPERTY_X86_UINT32_VALID.
binutils/
PR ld/23900
* readelf.c (get_segment_type): Support PT_GNU_PROPERTY.
(decode_x86_isa): Don't check GNU_PROPERTY_X86_UINT32_VALID.
(decode_x86_feature_1): Likewise.
(decode_x86_feature_2): Likewise.
(print_gnu_property_note): Remove GNU_PROPERTY_X86_UINT32_VALID
check.
* testsuite/binutils-all/i386/empty.d: Updated.
* testsuite/binutils-all/x86-64/empty-x32.d: Likewise.
* testsuite/binutils-all/x86-64/empty.d: Likewise.
* testsuite/binutils-all/i386/pr21231b.s: Change
GNU_PROPERTY_X86_ISA_1_USED bits to 0x7fffffff.
* testsuite/binutils-all/x86-64/pr21231b.s: Likewise.
gas/
PR ld/23900
* config/tc-i386.c (x86_cleanup): Don't set
GNU_PROPERTY_X86_UINT32_VALID.
* testsuite/gas/i386/property-1.s: Change
GNU_PROPERTY_X86_ISA_1_USED bits to 0.
include/
PR ld/23900
* elf/common.h (PT_GNU_PROPERTY): New.
(GNU_PROPERTY_X86_UINT32_VALID): Removed.
ld/
PR ld/23900
* testsuite/ld-elf/elf.exp: Run PR ld/23900 test.
* testsuite/ld-elf/pr23900-1-32.rd: New file.
* testsuite/ld-elf/pr23900-1-64.rd: Likewise.
* testsuite/ld-elf/pr23900-1.d: Likewise.
* testsuite/ld-elf/pr23900-1.s: Likewise.
* testsuite/ld-elf/pr23900-2.s: Likewise.
* testsuite/ld-elf/pr23900-2a.d: Likewise.
* testsuite/ld-elf/pr23900-2b.d: Likewise.
* testsuite/ld-i386/ibt-plt-1.d: Adjusted.
* testsuite/ld-i386/ibt-plt-2c.d: Likewise.
* testsuite/ld-i386/ibt-plt-2d.d: Likewise.
* testsuite/ld-i386/ibt-plt-3d.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d.d: Likewise.
* testsuite/ld-i386/pr23372c.d: Expect <None>
for GNU_PROPERTY_X86_ISA_1_USED.
* testsuite/ld-x86-64/pr23372c-x32.d: Likewise.
* testsuite/ld-x86-64/pr23372c.d: Likewise.
* testsuite/ld-x86-64/pr23372d-x32.d: Likewise.
* testsuite/ld-x86-64/pr23372d.d: Likewise.
* testsuite/ld-x86-64/property-x86-5a.s: Change
GNU_PROPERTY_X86_ISA_1_USED bits to 0.
* testsuite/ld-x86-64/property-x86-5b.s: Likewise.
gas/
PR gas/23954
* config/tc-riscv.c (my_getSmallExpression): Expand comment for
register support. Set expr_end if parse a register.
(riscv_ip) <'u'>: Break if imm_expr is not a symbol or constant.
* testsuite/gas/riscv/auipc-parsing.d: New.
* testsuite/gas/riscv/auipc-parsing.l: New.
* testsuite/gas/riscv/auipc-parsing.s: New.
Put back BFD_RELOC_X86_64_GOTPCREL in TC_FORCE_RELOCATION_LOCAL, which
was removed by
commit 56ceb5b540
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Thu Oct 22 04:49:20 2015 -0700
Add R_X86_64_[REX_]GOTPCRELX support to gas and ld
by accident.
PR gas/23956
gas/
* config/tc-riscv.c (validate_riscv_insn) <'1'>: New case.
(percent_op_null): New.
(riscv_ip) <'j'>: Set imm_reloc before p.
<'1'>: New case.
<'0'>: Use percent_op_null and don't set imm_reloc.
<alu_op>: Handle *args == '1'.
* testsuite/gas/riscv/tprel-add.d: New.
* testsuite/gas/riscv/tprel-add.l: New.
* testsuite/gas/riscv/tprel-add.s: New.
opcodes/
* riscv-opc.c (riscv_opcodes) <"add">: Use 1 not 0 for fourth arg.
This patch started off just adding the warnings in tc-ppc.c about
incorrect usage of @l, @h and @ha in instructions that don't have
16-bit D-form fields. That unfortunately showed up three warnings in
ld/testsuite/ld-powerpc/vle-multiseg.s on instructions like
e_li r3, IV_table@l+0x00
which was being assembled to
8: 70 60 00 00 e_li r3,0
a: R_PPC_ADDR16_LO IV_table
The ADDR16_LO reloc is of course completely bogus on e_li, which has
a split 20-bit signed integer field in bits 0x1f7fff, the low 11 bit
in 0x7ff, the next 5 bits in 0x1f0000, and the high 4 bits in 0x7800.
Applying an ADDR16_LO reloc to the instruction potentially changes
the e_li instruction to e_add2i., e_add2is, e_cmp16i, e_mull2i,
e_cmpl16i, e_cmph16i, e_cmphl16i, e_or2i, e_and2i., e_or2is, e_lis,
e_and2is, or some invalid encodings.
Now there is a relocation that suits e_li, R_PPC_VLE_ADDR20, which was
added 2017-09-05 but I can't see code in gas to generate the
relocation. In any case, VLE_ADDR20 probably doesn't have the correct
semantics for @l since ideally you'd want an @l to pair with @h or @ha
to generate a 32-bit constant. Thus @l should only produce a 16-bit
value, I think. So we need some more relocations to handle e_li it
seems, or as I do in this patch, modify the behaviour of existing
relocations when applied to e_li instructions.
include/
* opcode/ppc.h (E_OPCODE_MASK, E_LI_MASK, E_LI_INSN): Define.
bfd/
* elf32-ppc.c (ppc_elf_howto_raw <R_PPC_VLE_ADDR20>): Correct
mask and shift value.
(ppc_elf_vle_split16): Use E_OPCODE_MASK. Handle e_li
specially.
gas/
* config/tc-ppc.c (md_assemble): Adjust relocs for VLE before
TLS tweaks. Handle e_li. Warn on unexpected operand field
for lo16/hi16/ha16 relocs.
The RISC-V assembler generates fake labels with the name '.L0 ' as
part of the debug information (see
gas/config/tc-riscv.h:FAKE_LABEL_NAME).
The problem is that currently, when disassembling an object file, the
output looks like this (this is an example from the GDB testsuite, but
is pretty representative of anything with debug information):
000000000000001e <main>:
1e: 7179 addi sp,sp,-48
20: f406 sd ra,40(sp)
22: f022 sd s0,32(sp)
24: 1800 addi s0,sp,48
0000000000000026 <.L0 >:
26: 87aa mv a5,a0
28: feb43023 sd a1,-32(s0)
2c: fcc43c23 sd a2,-40(s0)
30: fef42623 sw a5,-20(s0)
0000000000000034 <.L0 >:
34: fec42783 lw a5,-20(s0)
38: 0007871b sext.w a4,a5
3c: 678d lui a5,0x3
3e: 03978793 addi a5,a5,57 # 3039 <.LASF30+0x2a9d>
42: 02f71463 bne a4,a5,6a <.L0 >
0000000000000046 <.L0 >:
46: 000007b7 lui a5,0x0
4a: 0007b783 ld a5,0(a5) # 0 <need_malloc>
4e: 6f9c ld a5,24(a5)
0000000000000050 <.L0 >:
50: 86be mv a3,a5
52: 466d li a2,27
54: 4585 li a1,1
56: 000007b7 lui a5,0x0
5a: 00078513 mv a0,a5
5e: 00000097 auipc ra,0x0
62: 000080e7 jalr ra # 5e <.L0 +0xe>
0000000000000066 <.L0 >:
66: 4785 li a5,1
68: a869 j 102 <.L0 >
000000000000006a <.L0 >:
6a: 000007b7 lui a5,0x0
6e: 00078513 mv a0,a5
72: 00000097 auipc ra,0x0
76: 000080e7 jalr ra # 72 <.L0 +0x8>
The frequent repeated '.L0 ' labels are pointless, as they are
non-unique there's no way to match a use of '.L0 ' to its appearence
in the output, so we'd be better off just not printing it at all.
That's what this patch does by defining a 'symbol_is_valid' method for
RISC-V. With this commit, the same disassembly now looks like this:
000000000000001e <main>:
1e: 7179 addi sp,sp,-48
20: f406 sd ra,40(sp)
22: f022 sd s0,32(sp)
24: 1800 addi s0,sp,48
26: 87aa mv a5,a0
28: feb43023 sd a1,-32(s0)
2c: fcc43c23 sd a2,-40(s0)
30: fef42623 sw a5,-20(s0)
34: fec42783 lw a5,-20(s0)
38: 0007871b sext.w a4,a5
3c: 678d lui a5,0x3
3e: 03978793 addi a5,a5,57 # 3039 <.LASF30+0x2a9d>
42: 02f71463 bne a4,a5,6a <.L4>
46: 000007b7 lui a5,0x0
4a: 0007b783 ld a5,0(a5) # 0 <need_malloc>
4e: 6f9c ld a5,24(a5)
50: 86be mv a3,a5
52: 466d li a2,27
54: 4585 li a1,1
56: 000007b7 lui a5,0x0
5a: 00078513 mv a0,a5
5e: 00000097 auipc ra,0x0
62: 000080e7 jalr ra # 5e <main+0x40>
66: 4785 li a5,1
68: a869 j 102 <.L5>
000000000000006a <.L4>:
6a: 000007b7 lui a5,0x0
6e: 00078513 mv a0,a5
72: 00000097 auipc ra,0x0
76: 000080e7 jalr ra # 72 <.L4+0x8>
In order to share the fake label between the assembler and the
libopcodes library, I've added some new defines RISCV_FAKE_LABEL_NAME
and RISCV_FAKE_LABEL_CHAR in include/opcode/riscv.h. I could have
just moved FAKE_LABEL_NAME to the include file, however, I thnk this
would be confusing, someone working on the assembler would likely not
expect to find FAKE_LABEL_NAME defined outside of the assembler source
tree. By introducing the RISCV_FAKE_LABEL_* defines I can leave the
assembler standard FAKE_LABEL_ defines in the assembler source, but
still share the RISCV_FAKE_LABEL_* with libopcodes.
gas/ChangeLog:
* config/tc-riscv.h (FAKE_LABEL_NAME): Define as
RISCV_FAKE_LABEL_NAME.
(FAKE_LABEL_CHAR): Define as RISCV_FAKE_LABEL_CHAR.
include/ChangeLog:
* dis-asm.h (riscv_symbol_is_valid): Declare.
* opcode/riscv.h (RISCV_FAKE_LABEL_NAME): Define.
(RISCV_FAKE_LABEL_CHAR): Define.
opcodes/ChangeLog:
* disassembler.c (disassemble_init_for_target): Add RISC-V
initialisation.
* riscv-dis.c (riscv_symbol_is_valid): New function.
Armv8.3-A has another key used in pointer authentication called the
B-key (other than the A-key that is already supported). In order for
stack unwinders to work it is necessary to be able to identify frames
that have been signed with the B-key rather than the A-key and it was
felt that keeping this as an augmentation character in the CIE was the
best bet. The DWARF extensions for ARM therefore propose to add a new
augmentation character 'B' to the CIE augmentation string and the
corresponding cfi directive ".cfi_b_key_frame". I've made the relevant
changes to GAS and LD to add support for B-key unwinding, which required
modifying LD to check for 'B' in the augmentation string, adding the
".cfi_b_key_frame" directive to GAS and adding a "pauth_key" field to
GAS's fde_entry and cie_entry structs.
The pointer authentication instructions will behave as NOPs on
architectures that don't support them, and so a check for the
architecture being assembled for is not necessary since there will be no
behavioural difference between augmentation strings with and without the
'B' character on such architectures.
2018-12-05 Sam Tebbs <sam.tebbs@arm.com>
bfd/
* elf-eh-frame.c (_bfd_elf_parse_eh_frame): Add check for 'B'.
gas/
* dw2gencfi.c (struct cie_entry): Add tc_cie_entry_extras invocation.
(alloc_fde_entry): Add tc_fde_entry_init_extra invocation.
(output_cie): Add tc_output_cie_extra invocation.
(select_cie_for_fde): Add tc_cie_fde_equivalent_extra and
tc_cie_entry_init_extra invocation.
(frch_cfi_data, cfa_save_data): Move to dwgencfi.h.
* config/tc-aarch64.c (s_aarch64_cfi_b_key_frame): Declare.
(md_pseudo_table): Add "cfi_b_key_frame".
* config/tc-aarch64.h (tc_fde_entry_extras, tc_cie_entry_extras,
tc_fde_entry_init_extra, tc_output_cie_extra,
tc_cie_fde_equivalent_extra, tc_cie_entry_init_extra): Define.
* dw2gencfi.h (struct fde_entry): Add tc_fde_entry_extras invocation.
(pointer_auth_key): Define.
(frch_cfi_data, cfa_save_data): Move from dwgencfi.c.
* doc/c-aarch64.texi (.cfi_b_key_frame): Add documentation.
* testsuite/gas/aarch64/(pac_ab_key.d, pac_ab_key.s): New file.
This removes ineffectual and wrong code caching section names in
gas/stabs.c. Code like
seg = subseg_new (name, 0);
...
if (seg->name == name)
seg->name = xstrdup (name);
with the idea of being able to unconditionally free "name" later no
longer works. "name" is referenced by the section hash table as well
as in the section->name field. It would be possible to use
"bfd_rename_section (stdoutput, seg, xstrdup (name))", but instead I
opted for a fairly straight-forward approach of adding extra
parameters to two functions to indicate section name strings should be
freed if possible.
PR 23938
* read.h (get_stab_string_offset): Update prototype.
* stabs.c (get_stab_string_offset): Add free_stabstr_secname
parameter. Free stabstr_secname if unused as section name.
Don't xstrdup name when used.
(s_stab_generic): Remove forward declaration. Add
stab_secname_obstack_end param. Reference notes obstack via
macros. Delete cached_secname. Adjust get_stab_string_offset
call. Free stab_secname if unused as section name.
(s_stab): Adjust s_stab_generic call.
(s_xstab): Likewise. Delete saved_secname and saved_strsecname.
* config/obj-elf.c (obj_elf_init_stab_section): Adjust
get_stab_string_offset call.
* config/obj-coff.c (obj_coff_init_stab_section): Likewise.
* config/obj-som.c (obj_som_init_stab_section): Likewise.
* testsuite/gas/all/pr23938.s: New test.
* testsuite/gas/all/gas.exp: Run it.
`-march=r5900' already enables the R5900 short loop workaround.
However, the R5900 ISA and most other MIPS ISAs are mutually
exclusive since R5900-specific instructions are generated as well.
The `-mfix-r5900' option can be used in combination with e.g.
`-mips2' or `-mips3' to generate generic MIPS binaries that also
work with the R5900 target.
This change has been tested with `make RUNTESTFLAGS=mips.exp
check-gas' for the targets `mipsr5900el-unknown-linux-gnu',
`mipsr5900el-elf' and `mips3-unknown-linux-gnu'.
gas/
* config/tc-mips.c (mips_fix_r5900, mips_fix_r5900_explicit):
New variables.
(options): Add OPTION_FIX_R5900 and OPTION_NO_FIX_R5900
enumeration constants.
(md_longopts): Add "mfix-r5900" and "mno-fix-r5900" options.
(can_swap_branch_p, md_parse_option, mips_after_parse_args):
Handle the new options.
(md_show_usage): Document the `-mfix-r5900' option.
* doc/as.texi: Likewise.
* doc/c-mips.texi: Likewise.
* testsuite/gas/mips/mips.exp: Run R5900 dump tests.
* testsuite/gas/mips/r5900-fix.d: Test `-mfix-r5900' option.
* testsuite/gas/mips/r5900-fix.s: Likewise.
* testsuite/gas/mips/r5900-no-fix.d: Test `-mno-fix-r5900'.
* testsuite/gas/mips/r5900-no-fix.s: Likewise.
These are documented by NXP as alternative mnemonics for BCC and BCS
respectively.
gas/ChangeLog:
* config/tc-s12z.c (opcodes): bhs, blo: New members.
* testsuite/gas/s12z/bra.d: Add tests for aliases.
* testsuite/gas/s12z/bra.s: Add tests for aliases.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch add support to the Bulk Allocation Tag instructions from
MTE. These are the following instructions added in this patch:
- LDGV <Xt>, [<Xn|SP>]!
- STGV <Xt>, [<Xn|SP>]!
This needed a new kind of operand for the new addressing [<Xn|SP>]!
since this has no offset and only takes a pre-indexed version.
Hence AARCH64_OPND_ADDR_SIMPLE_2 and ldtdgv_indexed are introduced.
(AARCH64_OPND_ADDR_SIMPLE fulfilled the no offset criteria but does
not allow writeback). We also needed new encoding and decoding
functions to be able to do the same.
where
<Xt> : Is the 64-bit destination GPR.
<Xn|SP> : Is the 64-bit first source GPR or Stack pointer.
*** include/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (aarch64_opnd): Add AARCH64_OPND_ADDR_SIMPLE_2.
(aarch64_insn_class): Add ldstgv_indexed.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-asm.c (aarch64_ins_addr_simple_2): New.
* aarch64-asm.h (ins_addr_simple_2): Declare the above.
* aarch64-dis.c (aarch64_ext_addr_simple_2): New.
* aarch64-dis.h (ext_addr_simple_2): Declare the above.
* aarch64-opc.c (operand_general_constraint_met_p): Add case for
AARCH64_OPND_ADDR_SIMPLE_2 and ldstgv_indexed.
(aarch64_print_operand): Add case for AARCH64_OPND_ADDR_SIMPLE_2.
* aarch64-tbl.h (aarch64_opcode_table): Add stgv and ldgv.
(AARCH64_OPERANDS): Define ADDR_SIMPLE_2.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_operands): Add switch case for
AARCH64_OPND_ADDR_SIMPLE_2 and allow [base]! for it.
(warn_unpredictable_ldst): Exempt ldstgv_indexed for ldgv.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Add tests for ldgv and stgv.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch add support to the Tag setting instructions from
MTE which consists of the following instructions:
- STG [<Xn|SP>, #<simm>]
- STG [<Xn|SP>, #<simm>]!
- STG [<Xn|SP>], #<simm>
- STZG [<Xn|SP>, #<simm>]
- STZG [<Xn|SP>, #<simm>]!
- STZG [<Xn|SP>], #<simm>
- ST2G [<Xn|SP>, #<simm>]
- ST2G [<Xn|SP>, #<simm>]!
- ST2G [<Xn|SP>], #<simm>
- STZ2G [<Xn|SP>, #<simm>]
- STZ2G [<Xn|SP>, #<simm>]!
- STZ2G [<Xn|SP>], #<simm>
- STGP <Xt>, <Xt2>, [<Xn|SP>, #<imm>]
- STGP <Xt>, <Xt2>, [<Xn|SP>, #<imm>]!
- STGP <Xt>, <Xt2>, [<Xn|SP>], #<imm>
where
<Xn|SP> : Is the 64-bit GPR or Stack pointer.
<simm> : Is the optional signed immediate offset, a multiple of 16
in the range -4096 to 4080, defaulting to 0.
*** include/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (aarch64_opnd): Add AARCH64_OPND_ADDR_SIMM11
and AARCH64_OPND_ADDR_SIMM13.
(aarch64_opnd_qualifier): Add new AARCH64_OPND_QLF_imm_tag.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (aarch64_opnd_qualifiers): Add new data
for AARCH64_OPND_QLF_imm_tag.
(operand_general_constraint_met_p): Add case for
AARCH64_OPND_ADDR_SIMM11 and AARCH64_OPND_ADDR_SIMM13.
(aarch64_print_operand): Likewise.
* aarch64-tbl.h (QL_LDST_AT, QL_STGP): New.
(aarch64_opcode_table): Add stg, stzg, st2g, stz2g and stgp
for both offset and pre/post indexed versions.
(AARCH64_OPERANDS): Define ADDR_SIMM11 and ADDR_SIMM13.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_operands): Add switch case for
AARCH64_OPND_ADDR_SIMM11 and AARCH64_OPND_ADDR_SIMM13.
(fix_insn): Likewise.
(warn_unpredictable_ldst): Exempt STGP.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Add tests for stg, st2g,
stzg, stz2g and stgp.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch add support to the Tag generation instructions from
MTE. These are the following instructions added in this patch:
- IRG <Xd|SP>, <Xn|SP>{, Xm}
- ADDG <Xd|SP>, <Xn|SP>, #<uimm1>. #<uimm2>
- SUBG <Xd|SP>, <Xn|SP>, #<uimm1>. #<uimm2>
- GMI <Xd>, <Xn|SP>, <Xm>
where
<Xd|SP> : Is the 64-bit destination GPR or Stack pointer.
<Xn|SP> : Is the 64-bit source GPR or Stack pointer.
<uimm6> : Is the unsigned immediate, a multiple of 16
in the range 0 to 1008.
<uimm4> : Is the unsigned immediate, in the range 0 to 15.
*** include/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (aarch64_opnd): Add
AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10 as new enums.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.h (aarch64_field_kind): New FLD_imm4_3.
(OPD_F_SHIFT_BY_4, operand_need_shift_by_four): New.
* aarch64-opc.c (fields): Add entry for imm4_3.
(operand_general_constraint_met_p): Add cases for
AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10.
(aarch64_print_operand): Likewise.
* aarch64-tbl.h (QL_ADDG): New.
(aarch64_opcode_table): Add addg, subg, irg and gmi.
(AARCH64_OPERANDS): Define UIMM4_ADDG and UIMM10.
* aarch64-asm.c (aarch64_ins_imm): Add case for
operand_need_shift_by_four.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_operands): Add switch case for
AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: New.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
* testsuite/gas/aarch64/illegal-memtag.d: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions. Memory Tagging Extension is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch adds the new command line option and the new feature macros.
*** include/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_MEMTAG): New.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (aarch64_feature_memtag): New.
(MEMTAG, MEMTAG_INSN): New.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_features): Add "memtag"
as a new option.
* doc/c-aarch64.texi: Document the same.
Instructions having an optional argument following a memory address
operand were not handled correctly if the optional argument was not
specified.
gas/ChangeLog:
2018-11-09 Andreas Krebbel <krebbel@linux.ibm.com>
* config/tc-s390.c (skip_optargs_p): New function.
(md_gather_operands): Use skip_optargs_p.
* testsuite/gas/s390/s390.exp: Run the new test.
* testsuite/gas/s390/zarch-optargs.d: New test.
* testsuite/gas/s390/zarch-optargs.s: New test.
We support source like the following
.data
.quad x-.
.space 8
x:
where at the time the .quad line is assembled, x is unknown so a fixup
is emitted for later evaluation. This is supported for data even when
the target may not have relocations for the expression, for example,
32-bit powerpc targets lack a 64-bit reloc. As long as the fixup
resolves at assembly time, gas is happy.
The idea of this patch is to support fixups that resolve at assembly
time for instructions too, even when the target might lack the
necessary relocations (and thus no howto).
* config/tc-ppc.c (fixup_size): New function.
(md_assemble): Use it to derive size and pcrel directly
from fixup reloc type.
VCVT between f16 and f32 is an Advanced SIMD instruction.
Not all the VCVT alternatives need neon, hence the check for neon is in
the encode function.
The check on neon for VCVT.f16.f32 (and vice versa) is missing.
vshcmd: > echo 'vcvt.f16.f32 d1, q1' | gas/as-new -mfpu=vfpxd -march=armv8.5-a -
testdir [15:59:10] $
Also, the handling of the condition code behaves differently to other
SIMD instructions -- no error message is produced when assembling an
instruction with a condition code suffix despite the arm encoding not
allowing a condition code. (n.b. the actual binary produced is
independent of the suffix).
The instruction should be treated similarly to VSUBL that has the same
caveat of "must be unconditional" describing the {<c>} symbol. vcvt
half-precision to single precision found in F6.1.58 in the ARM
Architecture Reference Manual issue C.a, vsubl found in F6.1.240 in
the ARM Architecture Reference Manual issue C.a
2018-11-06 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-arm.c (do_neon_cvt_1): Add check for neon and condition
codes to half-precision conversion.
* testsuite/gas/arm/neon-cond-bad-inc.s: Check vcvteq disallowed.
* testsuite/gas/arm/neon-cond-bad.l: Likewise.
* testsuite/gas/arm/neon-cond-bad_t2.d: Check vcvteq allowed in IT
block.
* testsuite/gas/arm/vfp-bad.l: Ensure vcvt doesn't work without neon.
* testsuite/gas/arm/vfp-bad.s: Likewise.
The instruction mask bits should never overlap any of the operands,
nor should operand bits overlap, but some operands weren't checked.
This patch arranges to check the omitted operands, using a mask
returned by the operand->insert function. Some tweaking of various
insert functions is needed to support this: The error case must set
field bits.
Since I was looking at the insert functions, I tidied some dead code
and simplified some of the powerpc_operands entries.
gas/
* config/tc-ppc.c (insn_validate): Don't ignore mask in
PPC_OPSHIFT_INV case. Call the insert function to calculate
a mask.
opcodes/
* ppc-opc.c (insert_arx, insert_ary, insert_rx, insert_ry, insert_ls),
(insert_evuimm1_ex0, insert_evuimm2_ex0, insert_evuimm4_ex0),
(insert_evuimm8_ex0, insert_evuimm_lt8, insert_evuimm_lt16),
(insert_rD_rS_even, insert_off_lsp, insert_off_spe2, insert_Ddd):
Don't return zero on error, insert mask bits instead.
(insert_sd4h, extract_sd4h, insert_sd4w, extract_sd4w): Delete.
(insert_sh6, extract_sh6): Delete dead code.
(insert_sprbat, insert_sprg): Use unsigned comparisions.
(powerpc_operands <OIMM>): Set shift count rather than using
PPC_OPSHIFT_INV.
<SE_SDH, SE_SDW>: Likewise. Don't use insert/extract functions.
This adds another check that might have saved me a little time
recently if it had been present.
* config/tc-ppc.c (insn_validate): Check that optional operands
are not followed by non-optional operands.
Many VEX-/EVEX-encoded instructions accessing GPRs become WIG outside of
64-bit mode. The respective templates should specify neither VexWIG nor
VexW0, but instead the setting of the bit should be determined from
- REX.W in 64-bit mode,
- the setting established through -mvexwig= / -mevexwig= otherwise.
This implies that the evex-wig2 testcase needs to go away, as being
wrong altogether.
A few test additions desirable here will only happen in later patches,
as the disassembler needs adjustments first.
Once again SSE2AVX templates are left alone, for it being unclear what
the behavior there should be.
This file was never supposed to be widely used. The fact that it has
found its way into many gas files led to bugs, typically when code
expecting a symbolS* to point at a struct symbol is presented with a
struct local_symbol. Also, commit 158184ac9e changed these structs in
2012 but didn't catch all places where symbol bsym was being used to
test for a local_symbol.
* Makefile.am (HFILES): Delete struc-symbol.h.
* doc/internals.texi: Delete struc-symbol.h reference and out
of date local symbol description.
* struc-symbol.h: Delete. Move contents to..
* symbols.c: ..here.
(symbol_on_chain, symbol_symbolS): New functions.
* symbols.h (symbol_on_chain, symbol_symbolS): Declare.
* cgen.c: Don't #include struc-symbol.h.
(gas_cgen_parse_operand): Don't test for local_symbol using
bsym, instead call symbol_symbolS. Use symbol_get_bfdsym.
(weak_operand_overflow_check, make_right_shifted_expr): Use
symbol accessors.
* config/obj-coff.c: Don't #include struc-symbol.h.
(GET_FILENAME_STRING): Delete.
* config/obj-elf.c: Don't #include struc-symbol.h.
(elf_file_symbol): Use symbol accessors.
(elf_adjust_symtab): Call symbol_on_chain.
* config/obj-evax.c: Don't #include struc-symbol.h.
* config/tc-nds32.c: Likewise.
* config/tc-rl78.c: Likewise.
* config/tc-rx.c: Likewise.
* config/tc-alpha.c: Likewise.
(add_to_link_pool, s_alpha_comm): Use symbol accessors.
* config/tc-arc.c: Don't #include struc-symbol.h.
(arc_check_relocs): Use symbol accessors, testing gas symbol
section rather than bfd symbol section.
* config/tc-avr.c: Don't #include struc-symbol.h.
(avr_patch_gccisr_frag): Use symbol accessors.
* config/tc-bfin.c: Don't #include struc-symbol.h.
(bfin_loop_beginend): Use symbol accessors.
* config/tc-csky.c: Don't #include struc-symbol.h.
(v2_work_movih, v2_work_ori): Use symbol accessors. Check for
absolute symbol as well as O_constant.
* config/tc-riscv.c: Don't #include struc-symbol.h.
(riscv_pre_output_hook): Use symbol accessors.
* config/tc-s390.c: Don't #include struc-symbol.h.
(s390_literals): Use symbol accessors.
* config/tc-score.c (s3_build_la_pic, s3_build_lwst_pic): Use
symbol accessors.
(s3_relax_branch_inst16, s3_relax_cmpbranch_inst32): Don't
test symbol bsym.
* config/tc-score7.c: Don't #include struc-symbol.h.
(s7_build_la_pic, s7_build_lwst_pic): Use symbol accessors.
(s7_b32_relax_to_b16): Don't test symbol bsym.
* config/tc-sh.c: Don't #include struc-symbol.h.
(insert_loop_bounds): Use symbol accessors.
(sh_frob_section): Remove bogus symbol canonicalization.
* config/tc-tic54x.c: Don't #include struc-symbol.h.
(tic54x_bss): Use symbol accessors.
* config/tc-tilegx.c: Don't #include struc-symbol.h.
(emit_tilegx_instruction, tilegx_parse_name): Use symbol accessors.
* config/tc-tilepro.c: Don't #include struc-symbol.h.
(emit_tilepro_instruction, tilepro_parse_name): Use accessors.
* config/tc-xtensa.c: Don't #include struc-symbol.h.
(xg_assemble_vliw_tokens): Use symbol accessors.
(xg_order_trampoline_chain): Likewise.
* ehopt.c: Don't #include struc-symbol.h.
(check_eh_frame): Correct local symbol test. Use symbol accessors.
* write.c: Don't #include struc-symbol.h.
(create_note_reloc, maybe_generate_build_notes): Use symbol accessors.
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
Local symbols don't have a sy_frag field.
PR 23837
* config/tc-hppa.c: Don't include struc-symbol.h.
(pa_build_unwind_subspace): Call get_symbol_frag rather than
referencing sy_frag.
This patch adds the vector alignment hints to the vector load and
store instructions as documented in the IBM z14 Principles of
Operations manual:
http://publibfi.boulder.ibm.com/epubs/pdf/dz9zr011.pdf
opcodes/ChangeLog:
2018-10-23 Andreas Krebbel <krebbel@linux.ibm.com>
* s390-opc.txt: Add vector load/store instructions with additional
alignment parameter.
gas/ChangeLog:
2018-10-23 Andreas Krebbel <krebbel@linux.ibm.com>
* config/tc-s390.c (md_gather_operands): Fix for optional operands
following memory addresses.
* testsuite/gas/s390/zarch-arch12.d: Add regexp checks for new
instruction variants.
* testsuite/gas/s390/zarch-arch12.s: Emit new instruction
variants.
Commit 1f38083f42 added a test
to check that the assembler handled fixups with resolved to
constant values. We were not handling this in the case of
16 bit values. This change fixes that.
* gas/config/tc-s12z.c (md_apply_fix): Handle BFD_RELOC_16
* config/tc-alpha.c (md_apply_fix): Handle BFD_RELOC_8 for fixups
without a symbol.
* testsuite/gas/all/gas.exp: Don't xfail forward test here..
* testsuite/gas/all/forward.d: ..do so here, removing alpha.
.eqv (and ==) ought not simplify expressions involving dot or other
symbols set by .eqv. If such simplification occurs, the value of dot
will be that at the assignment rather than at the place where the
symbol is used.
PR 23800
* expr.c (expr): Don't simplify expressions involving forward_ref
symbols when mode is expr_defer.
* config/tc-spu.c (spu_cons): Parse expression using normal
expression evaluation if @ppu is not detected.
* testsuite/gas/all/eqv-dot.d,
* testsuite/gas/all/eqv-dot.s: New test.
* testsuite/gas/all/gas.exp: Run it.
* testsuite/gas/mips/r5900.s: Extend the R5900 short loop fix
test with border cases.
* testsuite/gas/mips/r5900.d: Add extra expected disassembly.
* config/tc-mips.c (can_swap_branch_p): Clarify the R5900 short
loop hardware bug conditions. Correct note on the R5900
instruction count short loop fix.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools)
The encodings can be found in the System Register XML.
This patch adds support for the mitigation for Spectre Variant 4 by
adding the PSTATE bit SSBS which are accessible using MSR and MRS
instructions. Although this is a mandatory addition to the ARMv8.5-A,
it is permitted to be added to any version of the ARMv8 architecture.
This is enabled using the command line option of +ssbs for older
versions.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_SSBS): New.
(AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_SSBS by default.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (operand_general_constraint_met_p): Add
SSBS in the check for one-bit immediate.
(aarch64_sys_regs): New entry for SSBS.
(aarch64_sys_reg_supported_p): New check for above.
(aarch64_pstatefields): New entry for SSBS.
(aarch64_pstatefield_supported_p): New check for above.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_features): Add new "ssbs".
* doc/c-aarch64.texi: Document the same.
* testsuite/gas/aarch64/ssbs-illegal1.d: New test.
* testsuite/gas/aarch64/ssbs-illegal1.l: New test.
* testsuite/gas/aarch64/ssbs-illegal2.d: New test.
* testsuite/gas/aarch64/ssbs-illegal2.l: New test.
* testsuite/gas/aarch64/ssbs.s: New test.
* testsuite/gas/aarch64/ssbs1.d: Test with +ssbs
* testsuite/gas/aarch64/ssbs2.d: Test with armv8.5-a.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order/bti-branch-target-identification)
The Branch Target Identification instructions (BTI) are allocated to
existing HINT space, using HINT numbers 32, 34, 36, 38, such that
bits[7:6] of the instruction identify the compatibility of the BTI
instruction to different branches.
BTI {<targets>}
where <targets> one of the following, specifying which type of
indirection is allowed:
j : Can be a target of any BR Xn isntruction.
c : Can be a target of any BLR Xn and BR {X16|X17}.
jc: Can be a target of any free branch.
A BTI instruction without any <targets> is the strictest of all and
can not be a target of nay free branch.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_BTI): New.
(AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_BTI by default.
(aarch64_opnd): Add AARCH64_OPND_BTI_TARGET.
(HINT_OPD_CSYNC, HINT_OPD_C, HINT_OPD_J): New macros to
define HINT #imm values.
(HINT_OPD_JC, HINT_OPD_NULL): Likewise.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.h (HINT_OPD_NOPRINT, HINT_ENCODE): New.
(HINT_FLAG, HINT_VALUE): New macros to encode NO_PRINT flag
with the hint immediate.
* aarch64-opc.c (aarch64_hint_options): New entries for
c, j, jc and default (with HINT_OPD_F_NOPRINT flag) for BTI.
(aarch64_print_operand): Add case for AARCH64_OPND_BTI_TARGET
while checking for HINT_OPD_F_NOPRINT flag.
* aarch64-dis.c (aarch64_ext_hint): Use new HINT_VALUE to
extract value.
* aarch64-tbl.h (aarch64_feature_bti, BTI, BTI_INSN): New.
(aarch64_opcode_table): Add entry for BTI.
(AARCH64_OPERANDS): Add new description for BTI targets.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_bti_operand): New.
(process_omitted_operand): Add case for AARCH64_OPND_BTI_TARGET.
(parse_operands): Likewise.
* testsuite/gas/aarch64/system.d: Update for BTI.
* testsuite/gas/aarch64/bti.s: New.
* testsuite/gas/aarch64/bti.d: New.
* testsuite/gas/aarch64/illegal-bti.d: New.
* testsuite/gas/aarch64/illegal-bti.l: New.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools)
The encodings can be found in the System Register XML.
This patch adds the following:
MSR Xn, RNDR
MSR Xn, RNDRRS
These are optional instructions in ARMv8.5-A and hence the new
+rng is added.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_RNG): New.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (aarch64_sys_regs): New entries for
rndr and rndrrs.
(aarch64_sys_reg_supported_p): New check for above.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_features): New "rng" option.
* doc/c-aarch64.texi: Document the same.
* testsuite/gas/aarch64/sysreg-4.s: Test both instructions.
* testsuite/gas/aarch64/sysreg-4.d: Likewise.
* testsuite/gas/aarch64/illegal-sysreg-4.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order)
This patch adds the prediction restriction instructions (that is, cfp,
dvp, cpp). These instructions are retrospectively made optional for
all versions of the architecture from ARMv8.0 to ARMv8.4 and is
mandatory from ARMv8.5. Hence adding a new +predres which can be used
by the older architectures.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_PREDRES): New.
(AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_PREDRES by default.
(aarch64_opnd): Add AARCH64_OPND_SYSREG_SR.
(aarch64_sys_regs_sr): Declare new table.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-dis.c (aarch64_ext_sysins_op): Add case for
AARCH64_OPND_SYSREG_SR.
* aarch64-opc.c (aarch64_print_operand): Likewise.
(aarch64_sys_regs_sr): Define table.
(aarch64_sys_ins_reg_supported_p): Check for RCTX with
AARCH64_FEATURE_PREDRES.
* aarch64-tbl.h (aarch64_feature_predres): New.
(PREDRES, PREDRES_INSN): New.
(aarch64_opcode_table): Add entries for cfp, dvp and cpp.
(AARCH64_OPERANDS): Add new description for SYSREG_SR.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_sys_regs_sr_hsh): New.
(parse_operands): Add entry for AARCH64_OPND_SYSREG_SR.
(md_begin): Allocate and initialize aarch64_sys_regs_sr_hsh
with aarch64_sys_regs_sr.
(aarch64_features): Add new "predres" option for older
architectures.
* doc/c-aarch64.texi: Document the same.
* testsuite/gas/aarch64/sysreg-4.s: New.
* testsuite/gas/aarch64/sysreg-4.d: New.
* testsuite/gas/aarch64/illegal-sysreg-4.d: New.
* testsuite/gas/aarch64/illegal-sysreg-4.l: New.
* testsuite/gas/aarch64/predres.s: New.
* testsuite/gas/aarch64/predres.d: New.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order)
This instruction is retrospectively made optional for all versions of
the architecture from ARMv8.0 to ARMv8.4 and is mandatory from
ARMv8.5. Hence a new command line option of "+sb" is added for older
architectures.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_SB): New.
(AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_SB by default.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (aarch64_feature_sb): New.
(SB, SB_INSN): New.
(aarch64_opcode_table): Add entry for sb.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_features): Add new "sb" option
for older architectures.
* doc/c-aarch64.texi: Document the same.
* testsuite/gas/aarch64/sb.s: New.
* testsuite/gas/aarch64/sb.d: New.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools)
This is the first of the patch series and adds -march=armv8.5-a and
other internal feature marcos needed for it.
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_archs): New entry for armv8.5-a.
* doc/c-aarch64.texi: Add documentation for the same.
*** include/ChnageLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_V8_5): New.
(AARCH64_ARCH_V8_5): New.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (aarch64_feature_set aarch64_feature_v8_5): New.
(ARMV8_5, V8_5_INSN): New.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools)
This patch adds the Execution and Data Prediction Restriction
instructions (that is, cfprctx, dvprxtc, cpprctx). These are all
aliases to MCR and are disassembled as such.
This instruction is retrospectively made optional for all versions of
the architecture from ARMv8.0 to ARMv8.4 and is mandatory from
ARMv8.5. Hence adding a new +predres for older versions of the
architecture.
*** include/ChangeLog ***
2018-10-05 Sudakshina Das <sudi.das@arm.com>
* opcode/arm.h (ARM_EXT2_PREDRES): New.
(ARM_ARCH_V8_5A): Add ARM_EXT2_PREDRES by default.
*** gas/ChangeLog ***
2018-10-05 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (arm_ext_predres): New.
(insns): Add new cfprctx, dvprctx and cpprctx instructions.
(arm_extensions): Add "predres".
* doc/c-arm.texi: Document the above.
* testsuite/gas/arm/predres-bad.d: New test.
* testsuite/gas/arm/predres-bad.l: New test.
* testsuite/gas/arm/predres.s: New test.
* testsuite/gas/arm/predres1.d: New test.
* testsuite/gas/arm/predres2.d: New test.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools)
This patch adds the instruction SB. This instruction is
retrospectively made optional for all versions of the architecture
from ARMv8.0 to ARMv8.4 and is mandatory from ARMv8.5. Hence adding a
new "+sb" for older archtectures.
*** include/ChangeLog ***
2018-10-05 Sudakshina Das <sudi.das@arm.com>
* opcode/arm.h (ARM_EXT2_SB): New.
(ARM_ARCH_V8_5A): Add ARM_EXT2_SB by default.
*** opcodes/ChangeLog ***
2018-10-05 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (arm_opcodes): Add sb.
(thumb32_opcodes): Likewise.
*** gas/ChangeLog ***
2018-10-05 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (arm_ext_sb): New.
(insns): Add new sb instruction.
(arm_extensions): Add "sb".
* doc/c-arm.texi: Document the above.
* testsuite/gas/arm/sb-bad.d: New test.
* testsuite/gas/arm/sb-bad.l: New test.
* testsuite/gas/arm/sb-thumb1.d: New test.
* testsuite/gas/arm/sb-thumb2.d: New test.
* testsuite/gas/arm/sb.s: New test.
* testsuite/gas/arm/sb1.d: New test.
* testsuite/gas/arm/sb2.d: New test.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools)
This is the first of the patch series and adds -march=armv8.5-a and
other internal feature marcos needed for it.
*** gas/ChangeLog ***
2018-10-05 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (arm_archs): New entry for armv8.5-a.
(cpu_arch_ver): Likewise.
* doc/c-arm.texi: Add documentation for the same.
* testsuite/gas/arm/attr-march-armv8_5-a.d: New.
*** include/ChnageLog ***
2018-10-05 Sudakshina Das <sudi.das@arm.com>
* opcode/arm.h (ARM_EXT2_V8_5A): New.
(ARM_AEXT2_V8_5A, ARM_ARCH_V8_5A): New.
This patch adds the new instruction and relocation as per proposal:
https://openrisc.io/proposals/ladrp
This is to be added to the spec in an upcoming revision. The new instruction
l.adrp loads the page offset of the current instruction offset by
a 21-bit immediate shifted left 13-bits. This is meant to be used with
a 13-bit lower bit page offset. This allows us to free up the got
register r16.
l.adrp r3, foo
l.ori r4, r3, po(foo)
l.lbz r5, po(foo)(r3)
l.sb po(foo)(r3), r6
The relocations we add are:
- BFD_RELOC_OR1K_PLTA26 For PLT jump relocation with PLT entry
asm: plta() implemented using l.ardp, meaning
no need for r16 (the GOT reg)
- BFD_RELOC_OR1K_GOT_PG21 Upper 21-bit Page offset got address
asm: got()
- BFD_RELOC_OR1K_TLS_GD_PG21 Upper 21-bit Page offset with TLS General
asm: tlsgd() Dynamic calculation
- BFD_RELOC_OR1K_TLS_LDM_PG21 Upper 21-bit Page offset with TLS local
asm: tlsldm() dynamic calculation
- BFD_RELOC_OR1K_TLS_IE_PG21 Upper 21-bit Page offset with TLS Initial
asm: gottp() Executable calculation
- BFD_RELOC_OR1K_PCREL_PG21 Default relocation for disp21 (l.adrp
instructions)
- BFD_RELOC_OR1K_LO13 low 13-bit page offset relocation
asm: po() i.e. mem loads, addi etc
- BFD_RELOC_OR1K_SLO13 low 13-bit page offset relocation
asm: po() i.e. mem stores, with split immediate
- BFD_RELOC_OR1K_GOT_LO13, low 13-bit page offset with GOT calcs
asm: gotpo()
- BFD_RELOC_OR1K_TLS_GD_LO13 Lower 13-bit offset with TLS GD calcs
asm: tlsgdpo()
- BFD_RELOC_OR1K_TLS_LDM_LO13 Lower 13-bit offset with TLS LD calcs
asm: tlsldmpo()
- BFD_RELOC_OR1K_TLS_IE_LO13 Lower 13-bit offset with TLS IE calcs
asm: gottppo()
bfd/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* bfd-in2.h: Regenerated.
* elf32-or1k.c: (or1k_elf_howto_table): Fix formatting for
R_OR1K_PLT26, Add R_OR1K_PCREL_PG21, R_OR1K_GOT_PG21,
R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21, R_OR1K_TLS_IE_PG21,
R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13, R_OR1K_TLS_LDM_LO13,
R_OR1K_TLS_IE_LO13, R_OR1K_SLO13, R_OR1K_PLTA26.
(or1k_reloc_map): Add BFD_RELOC_OR1K_PCREL_PG21,
BFD_RELOC_OR1K_GOT_PG21, BFD_RELOC_OR1K_TLS_GD_PG21,
BFD_RELOC_OR1K_TLS_LDM_PG21, BFD_RELOC_OR1K_TLS_IE_PG21,
BFD_RELOC_OR1K_LO13, BFD_RELOC_OR1K_GOT_LO13,
BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_GD_LO13,
BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_LO13,
BFD_RELOC_OR1K_SLO13, BFD_RELOC_OR1K_PLTA26.
(elf_or1k_link_hash_table): Add field saw_plta.
(or1k_final_link_relocate): Add value calculations for new relocations.
(or1k_elf_relocate_section): Add section relocations for new
relocations.
(or1k_write_plt_entry): New function.
(or1k_elf_finish_dynamic_sections): Add support for PLTA relocations
using new l.adrp instruction. Cleanup PLT relocation code generation.
* libbfd.h: Regenerated.
* reloc.c: Add BFD_RELOC_OR1K_PCREL_PG21, BFD_RELOC_OR1K_LO13,
BFD_RELOC_OR1K_SLO13, BFD_RELOC_OR1K_GOT_PG21, BFD_RELOC_OR1K_GOT_LO13,
BFD_RELOC_OR1K_PLTA26, BFD_RELOC_OR1K_TLS_GD_PG21,
BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_PG21,
BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_PG21,
BFD_RELOC_OR1K_TLS_IE_LO13.
cpu/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* or1k.opc (parse_disp26): Add support for plta() relocations.
(parse_disp21): New function.
(or1k_rclass): New enum.
(or1k_rtype): New enum.
(or1k_imm16_relocs): Define new PO and SPO relocation mappings.
(parse_reloc): Add new po(), gotpo() and gottppo() for LO13 relocations.
(parse_imm16): Add support for the new 21bit and 13bit relocations.
* or1korbis.cpu (f-disp26): Don't assume SI.
(f-disp21): New pc-relative 21-bit 13 shifted to right.
(insn-opcode): Add ADRP.
(l-adrp): New instruction.
gas/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* config/tc-or1k.c (or1k_apply_fix): Add BFD_RELOC_OR1K_TLS_GD_PG21,
BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_PG21,
BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_PG21,
BFD_RELOC_OR1K_TLS_IE_LO13.
* testsuite/gas/or1k/allinsn.s: Add test for l.adrp.
* testsuite/gas/or1k/allinsn.d: Add test results for new
instructions.
* testsuite/gas/or1k/reloc-1.s: Add tests to generate
R_OR1K_PLTA26, R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21,
R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13,
R_OR1K_TLD_LDM_LO13, R_OR1K_TLS_IE_LO13, R_OR1K_LO13, R_OR1K_SLO13
relocations.
* testsuite/gas/or1k/reloc-1.d: Add relocation results for
tests.
* testsuite/gas/or1k/reloc-2.s: Add negative tests for store to
gotpo().
* testsuite/gas/or1k/reloc-2.l: Add expected error test results.
ld/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* testsuite/ld-or1k/or1k.exp: Add test cases for plt generation.
* testsuite/ld-or1k/plt1.dd: New file.
* testsuite/ld-or1k/plt1.s: New file.
* testsuite/ld-or1k/plt1.x.dd: New file.
* testsuite/ld-or1k/plta1.dd: New file.
* testsuite/ld-or1k/plta1.s: New file.
* testsuite/ld-or1k/pltlib.s: New file.
include/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* elf/or1k.h (elf_or1k_reloc_type): Add R_OR1K_PCREL_PG21,
R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21,
R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13,
R_OR1K_TLS_GD_LO13, R_OR1K_TLS_LDM_LO13, R_OR1K_TLS_IE_LO13,
R_OR1K_SLO13, R_OR1K_PLTA26.
opcodes/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* or1k-asm.c: Regenerated.
* or1k-desc.c: Regenerated.
* or1k-desc.h: Regenerated.
* or1k-dis.c: Regenerated.
* or1k-ibld.c: Regenerated.
* or1k-opc.c: Regenerated.
* or1k-opc.h: Regenerated.
* or1k-opinst.c: Regenerated.
Any open sequence at the end of a section or assembly is considered an error.
This patch adds a check at the end to ensure that all sequences have been closed
and if not reports a warning.
During disassembly it's not possible to detect this condition in the back-end so
the warning is only emitted from the assembler for now.
gas/
* config/tc-aarch64.c (force_automatic_sequence_close,
aarch64_frob_section): New.
* config/tc-aarch64.h (tc_frob_section, aarch64_frob_section): New.
This patch adds the verification rules for move prefix constraints.
The Arm SVE instruction MOVPRFX introduces[1] constraints on the instruction at
PC+4. Particularly the following constraints are handled by this patch
* MOVPRFX must be followed by an instruction.
* MOVPRFX can only be followed by non-layout altering directives.
* MOVPRFX destination register MUST be used as the destination register in the
instruction at PC+4, and is not allowed to be used in any other position other than
destructive input. This includes registers that architecturally overlap. e.g. x1
should be treated as z1.
* MOVPRFX must be followed by a restricted set of SVE instructions.
* The size of the destination register of MOVPRFX must be equal to that of
the operation at PC+4.
* The predicate register and operation of MOVPRFX must match that of the instruction
at PC+4
* The predicated instruction at PC+4 must use the merging predicate.
* Architectural aliases and pseudo-instructions need to be supported as well.
* MOVPRFX cannot be the last instruction in a sequence
Any failure to adhere to any of these constrains will emit an assembly warning
and a disassembly note.
[1] https://developer.arm.com/docs/ddi0584/latest/arm-architecture-reference-manual-supplement-the-scalable-vector-extension-sve-for-armv8-a
include/
* opcode/aarch64.h (aarch64_inst): Remove.
(enum err_type): Add ERR_VFI.
(aarch64_is_destructive_by_operands): New.
(init_insn_sequence): New.
(aarch64_decode_insn): Remove param name.
opcodes/
* aarch64-opc.c (init_insn_block): New.
(verify_constraints, aarch64_is_destructive_by_operands): New.
* aarch64-opc.h (verify_constraints): New.
gas/
* config/tc-aarch64.c (output_operand_error_report): Order warnings.
This patch introduces aarch64_instr_sequence which is a structure similar to IT
blocks on Arm in order to track instructions that introduce a constraint or
dependency on instruction 1..N positions away from the instruction that opened
the block.
The struct is also wired through to the locations that require it.
gas/
* config/tc-aarch64.c (now_instr_sequence):
(*insn_sequence, now_instr_sequence): New.
(output_operand_error_record, do_encode): Add insn_sequence.
(md_assemble): Update insn_sequence.
(try_to_encode_as_unscaled_ldst, fix_mov_imm_insn, fix_insn):
Pass insn_sequence.
* config/tc-aarch64.h (struct aarch64_segment_info_type):
Add insn_sequence.
include/
* opcode/aarch64.h (struct aarch64_instr_sequence): New.
(aarch64_opcode_encode): Use it.
opcodes/
* aarch64-asm.c (aarch64_opcode_encode): Add insn_sequence.
* aarch64-dis.c (insn_sequence): New.
Increase the fixup length to 4 for the 20 bit displacement.
gas/ChangeLog:
2018-09-25 Andreas Krebbel <krebbel@linux.ibm.com>
* config/tc-s390.c (md_apply_fix): Set fx_size to 4 for 20 bit
displacements.
* testsuite/gas/s390/s390.exp: Run new test.
* testsuite/gas/s390/zarch-z990-symbol-lay.s: New test.
H.J. Lu
Sam Tebbs
Jim Wilson
Alan Modra
Andrew Burgess
Fredrik Noring
Jozef Lawrynowicz
John Darrington
Thomas Preud'homme
Sudakshina Das
Andreas Krebbel
Yoshinori Sato
Matthew Malcomson
Jan Beulich
Stafford Horne
Tamar Christina