This patch removes the (undocumented) LIBGCC2_TF_CEXT target macro,
replacing it by -fbuilding-libgcc predefines (and thereby gets rid of
another LIBGCC2_LONG_DOUBLE_TYPE_SIZE conditional, though some more
patches are needed before that target macro can be eliminated). This
macro indicated the suffix used on __builtin_huge_val,
__builtin_copysign, __builtin_fabs built-in function names to produce
the names for a given floating-point mode.
Predefines are added for all floating-point modes supported for
libgcc, not just TFmode. These are fully accurate for modes
corresponding to float, double and long double. For other modes, the
suffix for *constants* is determined by the targetm.c.mode_for_suffix
hook (the limit to two possible suffixes 'w' and 'q' being hardcoded
in various places). This is in fact the suffix for built-in functions
as well where such functions exist.
* For i386, the *q functions always exist (whether or not TFmode is
used for long double). The *w functions never exist (but this
doesn't matter for libgcc, since no i386 configuration treats XFmode
as a supported scalar mode if long double is TFmode; if __float80
were to be supported for 64-bit Android, properly such functions
ought to be added).
* For ia64, the *q functions exist for non-HP-UX (under HP-UX, long
double is TFmode, so they aren't needed). The *w functions never
exist. This is an issue for this libgcc code for the XFmode complex
functions in libgcc on HP-UX; as I understand it, right now those
will accidentally be using TFmode versions of those three functions,
so involving unnecessary conversions, while the sanity check on CEXT
accidentally passes because all it tests is the sizes of the types.
Because of the lack of 'w' functions, the patch uses 'l' when the
constant suffix is 'w', matching what the existing libgcc code would
do for IA64 HP-UX in that case.
Ideally there would be generic code to create such built-in functions
for all supported floating-point types. That may be something to
consider if support for TS 18661-3 (standard bindings for IEEE
754-2008, defining names such as _Float128, and function names such as
copysignf128) is added in future.
Bootstrapped with no regressions on x86_64-unknown-linux-gnu.
gcc:
* system.h (LIBGCC2_TF_CEXT): Poison.
* config/i386/cygming.h (LIBGCC2_TF_CEXT): Remove.
* config/i386/darwin.h (LIBGCC2_TF_CEXT): Likewise.
* config/i386/dragonfly.h (LIBGCC2_TF_CEXT): Likewise.
* config/i386/freebsd.h (LIBGCC2_TF_CEXT): Likewise.
* config/i386/gnu-user-common.h (LIBGCC2_TF_CEXT): Likewise.
* config/i386/openbsdelf.h (LIBGCC2_TF_CEXT): Likewise.
* config/i386/sol2.h (LIBGCC2_TF_CEXT): Likewise.
* config/ia64/ia64.h (LIBGCC2_TF_CEXT): Likewise.
* config/ia64/linux.h (LIBGCC2_TF_CEXT): Likewise.
gcc/c-family:
* c-cppbuiltin.c (c_cpp_builtins): Define __LIBGCC_*_FUNC_EXT__
for supported floating-point modes.
libgcc:
* libgcc2.c (CEXT): Define using __LIBGCC_*_FUNC_EXT__.
From-SVN: r215368
The i386 sfp-machine.h defines FP_TRAPPING_EXCEPTIONS in a way that is
always wrong: it treats a set bit as indicating the exception is
trapping, when actually a set bit (both for 387 and SSE floating
point) indicates it is masked, and a clear bit indicates it is
trapping. This patch fixes this bug.
Bootstrapped with no regressions on x86_64-unknown-linux-gnu.
libgcc:
* config/i386/sfp-machine.h (FP_TRAPPING_EXCEPTIONS): Treat clear
bits not set bits as indicating trapping exceptions.
gcc/testsuite:
* gcc.dg/torture/float128-exact-underflow.c: New test.
From-SVN: r215347
This patch removes the LIBGCC2_HAS_{SF,DF,XF,TF}_MODE target macros,
replacing them by predefines with -fbuilding-libgcc, together with a
target hook that can influence those predefines when needed.
The new default is that a floating-point mode is supported in libgcc
if (a) it passes the scalar_mode_supported_p hook (otherwise it's not
plausible for it to be supported in libgcc) and (b) it's one of those
four modes (since those are the modes for which libgcc hardcodes the
possibility of support). The target hook can override the default
choice (in either direction) for modes that pass
scalar_mode_supported_p (although overriding in the direction of
returning true when the default would return false only makes sense if
all relevant functions are specially defined in libgcc for that
particular target).
The previous default settings depended on various settings such as
LIBGCC2_LONG_DOUBLE_TYPE_SIZE, as well as targets defining the above
target macros if the default wasn't correct.
The default scalar_mode_supported_p only declares a floating-point
mode to be supported if it matches one of float / double / long
double. This means that in most cases where a mode is only supported
conditionally in libgcc (TFmode only supported if it's the mode of
long double, most commonly), the default gets things right. Overrides
were needed in the following cases:
* SFmode would always have been supported in libgcc (the condition was
BITS_PER_UNIT == 8, true for all current targets), but pdp11
defaults to 64-bit float, and in that case SFmode would fail
scalar_mode_supported_p. I don't know if libgcc actually built for
pdp11 (and the port may well no longer be being used), but this
patch adds a scalar_mode_supported_p hook to it to ensure SFmode is
treated as supported.
* Certain i386 and ia64 targets need the new hook to match the
existing cases for when XFmode or TFmode support is present in
libgcc. For i386, the hook can always declare XFmode to be
supported - the cases where it's not are the cases where long double
is TFmode, in which case XFmode fails scalar_mode_supported_p[*] -
but TFmode support needs to be conditional. (And of the targets not
defining LIBGCC2_HAS_TF_MODE before this patch, some defined
LONG_DOUBLE_TYPE_SIZE to 64, so ensuring LIBGCC2_HAS_TF_MODE would
always be false, while others did not define it, so allowing it to
be true in the -mlong-double-128 case. This patch matches that
logic, although I suspect all the latter targets would have been
broken if you tried to enable -mlong-double-128 by default, for lack
of the soft-fp TFmode support in libgcc, which is separately
configured.)
[*] I don't know if it's deliberate not to support __float80 at all
with -mlong-double-128.
In order to implement the default version of the new hook,
insn-modes.h was made to contain macros such as HAVE_TFmode for each
machine mode, so the default hook can contain conditionals on whether
XFmode and TFmode exist (to match the hardcoding of a list of modes in
libgcc). This is also used in fortran/trans-types.c; previously it
had a conditional on defined(LIBGCC2_HAS_TF_MODE) (a bit dubious,
since it ignored the value of the macro), which is replaced by testing
defined(HAVE_TFmode), in conjunction with requiring
targetm.libgcc_floating_mode_supported_p.
(Fortran is testing something stronger than that hook: not only is
libgcc support required, but also libm or equivalent. Thus, it has a
test for ENABLE_LIBQUADMATH_SUPPORT in the case that the mode is
TFmode and that's not the same as any of the three standard types.
The old and new tests are intended to accept exactly the same set of
modes for all targets.)
Apart from the four target macros eliminated by this patch, it gets us
closer to eliminating LIBGCC2_LONG_DOUBLE_TYPE_SIZE as well, though a
few more places using that macro need changing first.
Bootstrapped with no regressions on x86_64-unknown-linux-gnu; also
built cc1 for crosses to ia64-elf and pdp11-none as a minimal test of
changes for those targets.
gcc:
* target.def (libgcc_floating_mode_supported_p): New hook.
* targhooks.c (default_libgcc_floating_mode_supported_p): New
function.
* targhooks.h (default_libgcc_floating_mode_supported_p): Declare.
* doc/tm.texi.in (LIBGCC2_HAS_DF_MODE, LIBGCC2_HAS_XF_MODE)
(LIBGCC2_HAS_TF_MODE): Remove.
(TARGET_LIBGCC_FLOATING_MODE_SUPPORTED_P): New @hook.
* doc/tm.texi: Regenerate.
* genmodes.c (emit_insn_modes_h): Define HAVE_%smode for each
machine mode.
* system.h (LIBGCC2_HAS_SF_MODE, LIBGCC2_HAS_DF_MODE)
(LIBGCC2_HAS_XF_MODE, LIBGCC2_HAS_TF_MODE): Poison.
* config/i386/cygming.h (LIBGCC2_HAS_TF_MODE): Remove.
* config/i386/darwin.h (LIBGCC2_HAS_TF_MODE): Remove.
* config/i386/djgpp.h (IX86_MAYBE_NO_LIBGCC_TFMODE): Define.
* config/i386/dragonfly.h (LIBGCC2_HAS_TF_MODE): Remove.
* config/i386/freebsd.h (LIBGCC2_HAS_TF_MODE): Remove.
* config/i386/gnu-user-common.h (LIBGCC2_HAS_TF_MODE): Remove.
* config/i386/i386-interix.h (IX86_NO_LIBGCC_TFMODE): Define.
* config/i386/i386.c (ix86_libgcc_floating_mode_supported_p): New
function.
(TARGET_LIBGCC_FLOATING_MODE_SUPPORTED_P): Define.
* config/i386/i386elf.h (IX86_MAYBE_NO_LIBGCC_TFMODE): Define.
* config/i386/lynx.h (IX86_MAYBE_NO_LIBGCC_TFMODE): Define.
* config/i386/netbsd-elf.h (IX86_MAYBE_NO_LIBGCC_TFMODE): Define.
* config/i386/netbsd64.h (IX86_MAYBE_NO_LIBGCC_TFMODE): Define.
* config/i386/nto.h (IX86_MAYBE_NO_LIBGCC_TFMODE): Define.
* config/i386/openbsd.h (IX86_MAYBE_NO_LIBGCC_TFMODE): Define.
* config/i386/openbsdelf.h (LIBGCC2_HAS_TF_MODE): Remove.
* config/i386/rtemself.h (IX86_NO_LIBGCC_TFMODE): Define.
* config/i386/sol2.h (LIBGCC2_HAS_TF_MODE): Remove.
* config/i386/vx-common.h (IX86_MAYBE_NO_LIBGCC_TFMODE): Define.
* config/ia64/elf.h (IA64_NO_LIBGCC_TFMODE): Define.
* config/ia64/freebsd.h (IA64_NO_LIBGCC_TFMODE): Define.
* config/ia64/hpux.h (LIBGCC2_HAS_XF_MODE, LIBGCC2_HAS_TF_MODE):
Remove.
* config/ia64/ia64.c (TARGET_LIBGCC_FLOATING_MODE_SUPPORTED_P):
New macro.
(ia64_libgcc_floating_mode_supported_p): New function.
* config/ia64/linux.h (LIBGCC2_HAS_TF_MODE): Remove.
* config/ia64/vms.h (IA64_NO_LIBGCC_XFMODE)
(IA64_NO_LIBGCC_TFMODE): Define.
* config/msp430/msp430.h (LIBGCC2_HAS_DF_MODE): Remove.
* config/pdp11/pdp11.c (TARGET_SCALAR_MODE_SUPPORTED_P): New
macro.
(pdp11_scalar_mode_supported_p): New function.
* config/rl78/rl78.h (LIBGCC2_HAS_DF_MODE): Remove.
* config/rx/rx.h (LIBGCC2_HAS_DF_MODE): Remove.
gcc/c-family:
* c-cppbuiltin.c (c_cpp_builtins): Define __LIBGCC_HAS_%s_MODE__
macros for floating-point modes.
gcc/fortran:
* trans-types.c (gfc_init_kinds): Check
targetm.libgcc_floating_mode_supported_p for floating-point
modes. Check HAVE_TFmode instead of LIBGCC2_HAS_TF_MODE.
libgcc:
* libgcc2.h (LIBGCC2_HAS_SF_MODE): Define using
__LIBGCC_HAS_SF_MODE__.
(LIBGCC2_HAS_DF_MODE): Define using __LIBGCC_HAS_DF_MODE__.
(LIBGCC2_HAS_XF_MODE): Define using __LIBGCC_HAS_XF_MODE__.
(LIBGCC2_HAS_TF_MODE): Define using __LIBGCC_HAS_TF_MODE__.
* config/libbid/bid_gcc_intrinsics.h
(LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Do not define.
(LIBGCC2_HAS_XF_MODE): Define using __LIBGCC_HAS_XF_MODE__.
(LIBGCC2_HAS_TF_MODE): Define using __LIBGCC_HAS_TF_MODE__.
* fixed-bit.h (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Do not define.
(LIBGCC2_HAS_SF_MODE): Define using __LIBGCC_HAS_SF_MODE__.
(LIBGCC2_HAS_DF_MODE): Define using __LIBGCC_HAS_DF_MODE__.
From-SVN: r215215
gcc/
PR target/63223
* config/avr/avr.md (*tablejump.3byte-pc): New insn.
(*tablejump): Restrict to !AVR_HAVE_EIJMP_EICALL. Add void clobber.
(casesi): Expand to *tablejump.3byte-pc if AVR_HAVE_EIJMP_EICALL.
libgcc/
PR target/63223
* config/avr/libgcc.S (__tablejump2__): Rewrite to use RAMPZ, ELPM
and R24 as needed. Make work for all devices and .text locations.
(__do_global_ctors, __do_global_dtors): Use word addresses.
(__tablejump__, __tablejump_elpm__): Remove functions.
* t-avr (LIB1ASMFUNCS): Remove _tablejump, _tablejump_elpm.
Add _tablejump2.
(XICALL, XIJMP): New macros.
From-SVN: r215152
gcc:
* config/i386/cygming.h (TF_SIZE): Remove.
* config/i386/darwin.h (TF_SIZE): Remove.
* config/i386/dragonfly.h (TF_SIZE): Remove.
* config/i386/freebsd.h (TF_SIZE): Remove.
* config/i386/gnu-user-common.h (TF_SIZE): Remove.
* config/i386/openbsdelf.h (TF_SIZE): Remove.
* config/i386/sol2.h (TF_SIZE): Remove.
* config/ia64/hpux.h (XF_SIZE, TF_SIZE): Remove.
* config/ia64/linux.h (TF_SIZE): Remove.
* doc/tm.texi.in (SF_SIZE, DF_SIZE, XF_SIZE, TF_SIZE): Remove.
* doc/tm.texi: Regenerate.
* system.h (SF_SIZE, DF_SIZE, XF_SIZE, TF_SIZE): Poison.
gcc/c-family:
* c-cppbuiltin.c (c_cpp_builtins): Define macros for mantissa
digits of floating-point modes if -fbuilding-libgcc.
libgcc:
* libgcc2.c (SF_SIZE): Change all uses to __LIBGCC_SF_MANT_DIG__.
(DF_SIZE): Change all uses to __LIBGCC_DF_MANT_DIG__.
(XF_SIZE): Change all uses to __LIBGCC_XF_MANT_DIG__.
(TF_SIZE): Change all uses to __LIBGCC_TF_MANT_DIG__.
* libgcc2.h (SF_SIZE): Change to __LIBGCC_SF_MANT_DIG__. Give
error if not defined and LIBGCC2_HAS_SF_MODE is defined.
(DF_SIZE): Change to __LIBGCC_DF_MANT_DIG__. Give error if not
defined and LIBGCC2_HAS_DF_MODE is defined.
(XF_SIZE): Change to __LIBGCC_XF_MANT_DIG__. Give error if not
defined and LIBGCC2_HAS_XF_MODE is defined.
(TF_SIZE): Change to __LIBGCC_TF_MANT_DIG__. Give error if not
defined and LIBGCC2_HAS_TF_MODE is defined.
From-SVN: r215014
gcc/c-family:
* c-cppbuiltin.c (c_cpp_builtins): Also define
__LIBGCC_EH_TABLES_CAN_BE_READ_ONLY__,
__LIBGCC_EH_FRAME_SECTION_NAME__, __LIBGCC_JCR_SECTION_NAME__,
__LIBGCC_CTORS_SECTION_ASM_OP__, __LIBGCC_DTORS_SECTION_ASM_OP__,
__LIBGCC_TEXT_SECTION_ASM_OP__, __LIBGCC_INIT_SECTION_ASM_OP__,
__LIBGCC_INIT_ARRAY_SECTION_ASM_OP__,
__LIBGCC_STACK_GROWS_DOWNWARD__,
__LIBGCC_DONT_USE_BUILTIN_SETJMP__,
__LIBGCC_DWARF_ALT_FRAME_RETURN_COLUMN__,
__LIBGCC_DWARF_FRAME_REGISTERS__,
__LIBGCC_EH_RETURN_STACKADJ_RTX__, __LIBGCC_JMP_BUF_SIZE__,
__LIBGCC_STACK_POINTER_REGNUM__ and
__LIBGCC_VTABLE_USES_DESCRIPTORS__ for -fbuilding-libgcc.
(builtin_define_with_value): Handle backslash-escaping in string
macro values.
libgcc:
* Makefile.in (CRTSTUFF_CFLAGS): Add -fbuilding-libgcc.
* config/aarch64/linux-unwind.h (STACK_POINTER_REGNUM): Change all
uses to __LIBGCC_STACK_POINTER_REGNUM__.
(DWARF_ALT_FRAME_RETURN_COLUMN): Change all uses to
__LIBGCC_DWARF_ALT_FRAME_RETURN_COLUMN__.
* config/alpha/vms-unwind.h (DWARF_ALT_FRAME_RETURN_COLUMN):
Change use to __LIBGCC_DWARF_ALT_FRAME_RETURN_COLUMN__.
* config/cr16/unwind-cr16.c (STACK_GROWS_DOWNWARD): Change all
uses to __LIBGCC_STACK_GROWS_DOWNWARD__.
(DWARF_FRAME_REGISTERS): Change all uses to
__LIBGCC_DWARF_FRAME_REGISTERS__.
(EH_RETURN_STACKADJ_RTX): Change all uses to
__LIBGCC_EH_RETURN_STACKADJ_RTX__.
* config/cr16/unwind-dw2.h (DWARF_FRAME_REGISTERS): Change use to
__LIBGCC_DWARF_FRAME_REGISTERS__. Remove conditional definition.
* config/i386/cygming-crtbegin.c (EH_FRAME_SECTION_NAME): Change
use to __LIBGCC_EH_FRAME_SECTION_NAME__.
(JCR_SECTION_NAME): Change use to __LIBGCC_JCR_SECTION_NAME__.
* config/i386/cygming-crtend.c (EH_FRAME_SECTION_NAME): Change use
to __LIBGCC_EH_FRAME_SECTION_NAME__.
(JCR_SECTION_NAME): Change use to __LIBGCC_JCR_SECTION_NAME__
* config/mips/linux-unwind.h (STACK_POINTER_REGNUM): Change use to
__LIBGCC_STACK_POINTER_REGNUM__.
(DWARF_ALT_FRAME_RETURN_COLUMN): Change all uses to
__LIBGCC_DWARF_ALT_FRAME_RETURN_COLUMN__.
* config/nios2/linux-unwind.h (STACK_POINTER_REGNUM): Change use
to __LIBGCC_STACK_POINTER_REGNUM__.
* config/pa/hpux-unwind.h (DWARF_ALT_FRAME_RETURN_COLUMN): Change
all uses to __LIBGCC_DWARF_ALT_FRAME_RETURN_COLUMN__.
* config/pa/linux-unwind.h (DWARF_ALT_FRAME_RETURN_COLUMN): Change
all uses to __LIBGCC_DWARF_ALT_FRAME_RETURN_COLUMN__.
* config/rs6000/aix-unwind.h (DWARF_ALT_FRAME_RETURN_COLUMN):
Change all uses to __LIBGCC_DWARF_ALT_FRAME_RETURN_COLUMN__.
(STACK_POINTER_REGNUM): Change all uses to
__LIBGCC_STACK_POINTER_REGNUM__.
* config/rs6000/darwin-fallback.c (STACK_POINTER_REGNUM): Change
use to __LIBGCC_STACK_POINTER_REGNUM__.
* config/rs6000/linux-unwind.h (STACK_POINTER_REGNUM): Change all
uses to __LIBGCC_STACK_POINTER_REGNUM__.
* config/sparc/linux-unwind.h (DWARF_FRAME_REGISTERS): Change use
to __LIBGCC_DWARF_FRAME_REGISTERS__.
* config/sparc/sol2-unwind.h (DWARF_FRAME_REGISTERS): Change use
to __LIBGCC_DWARF_FRAME_REGISTERS__.
* config/tilepro/linux-unwind.h (STACK_POINTER_REGNUM): Change use
to __LIBGCC_STACK_POINTER_REGNUM__.
* config/xtensa/unwind-dw2-xtensa.h (DWARF_FRAME_REGISTERS):
Remove conditional definition.
* crtstuff.c (TEXT_SECTION_ASM_OP): Change all uses to
__LIBGCC_TEXT_SECTION_ASM_OP__.
(EH_FRAME_SECTION_NAME): Change all uses to
__LIBGCC_EH_FRAME_SECTION_NAME__.
(EH_TABLES_CAN_BE_READ_ONLY): Change all uses to
__LIBGCC_EH_TABLES_CAN_BE_READ_ONLY__.
(CTORS_SECTION_ASM_OP): Change all uses to
__LIBGCC_CTORS_SECTION_ASM_OP__.
(DTORS_SECTION_ASM_OP): Change all uses to
__LIBGCC_DTORS_SECTION_ASM_OP__.
(JCR_SECTION_NAME): Change all uses to
__LIBGCC_JCR_SECTION_NAME__.
(INIT_SECTION_ASM_OP): Change all uses to
__LIBGCC_INIT_SECTION_ASM_OP__.
(INIT_ARRAY_SECTION_ASM_OP): Change all uses to
__LIBGCC_INIT_ARRAY_SECTION_ASM_OP__.
* generic-morestack.c (STACK_GROWS_DOWNWARD): Change all uses to
__LIBGCC_STACK_GROWS_DOWNWARD__.
* libgcc2.c (INIT_SECTION_ASM_OP): Change all uses to
__LIBGCC_INIT_SECTION_ASM_OP__.
(INIT_ARRAY_SECTION_ASM_OP): Change all uses to
__LIBGCC_INIT_ARRAY_SECTION_ASM_OP__.
(EH_FRAME_SECTION_NAME): Change all uses to
__LIBGCC_EH_FRAME_SECTION_NAME__.
* libgcov-profiler.c (VTABLE_USES_DESCRIPTORS): Remove conditional
definitions. Change all uses to
__LIBGCC_VTABLE_USES_DESCRIPTORS__.
* unwind-dw2.c (STACK_GROWS_DOWNWARD): Change all uses to
__LIBGCC_STACK_GROWS_DOWNWARD__.
(DWARF_FRAME_REGISTERS): Change all uses to
__LIBGCC_DWARF_FRAME_REGISTERS__.
(EH_RETURN_STACKADJ_RTX): Change all uses to
__LIBGCC_EH_RETURN_STACKADJ_RTX__.
* unwind-dw2.h (DWARF_FRAME_REGISTERS): Remove conditional
definition. Change use to __LIBGCC_DWARF_FRAME_REGISTERS__.
* unwind-sjlj.c (DONT_USE_BUILTIN_SETJMP): Change all uses to
__LIBGCC_DONT_USE_BUILTIN_SETJMP__.
(JMP_BUF_SIZE): Change use to __LIBGCC_JMP_BUF_SIZE__.
From-SVN: r214954
gcc/
2014-07-30 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
* config/s390/s390.c (s390_emit_tpf_eh_return): Pass original return
address as second parameter to __tpf_eh_return routine.
libgcc/
2014-07-30 J. D. Johnston <jjohnst@us.ibm.com>
* config/s390/tpf-unwind.h: Include <stdbool.h>.
(__tpf_eh_return): Add original return address as second parameter.
Handle cases where unwinder routines were called directly, instead
of from within the C++ library.
From-SVN: r213305
* config/i386/cygming-crtbegin.c (deregister_frame_fn): Newly public.
(__gcc_deregister_frame): Move logic to detect deregister function to...
(__gcc_register_frame): here, so it's consistent with the register logic.
From-SVN: r213009
* config/pa/linux-atomic.c (__sync_lock_release_4): New.
(SYNC_LOCK_RELEASE): Update to use __kernel_cmpxchg for release.
Don't use SYNC_LOCK_RELEASE for int type.
From-SVN: r212767
2014-07-10 Rong Xu <xur@google.com>
Add gcov-tool: an offline gcda profile processing tool
Support.
* gcc/gcov-io.c (gcov_position): Make avaialble to gcov-tool.
(gcov_is_error): Ditto.
(gcov_read_string): Ditto.
(gcov_read_sync): Ditto.
* gcc/gcov-io.h: Move counter defines to gcov-counter.def.
* gcc/gcov-dump.c (tag_counters): Use gcov-counter.def.
* gcc/coverage.c: Ditto.
* gcc/gcov-tool.c: Offline gcda profile processing tool.
(unlink_gcda_file): Remove one gcda file.
(unlink_profile_dir): Remove gcda files from the profile path.
(gcov_output_files): Output gcda files to an output dir.
(profile_merge): Merge two profiles in directory.
(print_merge_usage_message): Print merge usage.
(merge_usage): Print merge usage and exit.
(do_merge): Driver for profile merge sub-command.
(profile_rewrite): Rewrite profile.
(print_rewrite_usage_message): Print rewrite usage.
(rewrite_usage): Print rewrite usage and exit.
(do_rewrite): Driver for profile rewrite sub-command.
(print_usage): Print gcov-info usage and exit.
(print_version): Print gcov-info version.
(process_args): Process arguments.
(main): Main routine for gcov-tool.
* gcc/Makefile.in: Build and install gcov-tool.
* gcc/gcov-counter.def: New file split from gcov-io.h.
* libgcc/libgcov-driver.c (gcov_max_filename): Make available
to gcov-tool.
* libgcc/libgcov-merge.c (__gcov_merge_add): Replace
gcov_read_counter() with a Macro.
(__gcov_merge_ior): Ditto.
(__gcov_merge_time_profile): Ditto.
(__gcov_merge_single): Ditto.
(__gcov_merge_delta): Ditto.
* libgcc/libgcov-util.c (void gcov_set_verbose): Set the verbose flag
in the utility functions.
(set_fn_ctrs): Utility function for reading gcda files to in-memory
gcov_list object link lists.
(tag_function): Ditto.
(tag_blocks): Ditto.
(tag_arcs): Ditto.
(tag_lines): Ditto.
(tag_counters): Ditto.
(tag_summary): Ditto.
(read_gcda_finalize): Ditto.
(read_gcda_file): Ditto.
(ftw_read_file): Ditto.
(read_profile_dir_init): Ditto.
(gcov_read_profile_dir): Ditto.
(gcov_read_counter_mem): Ditto.
(gcov_get_merge_weight): Ditto.
(merge_wrapper): A wrapper function that calls merging handler.
(gcov_merge): Merge two gcov_info objects with weights.
(find_match_gcov_info): Find the matched gcov_info in the list.
(gcov_profile_merge): Merge two gcov_info object lists.
(__gcov_add_counter_op): Process edge profile counter values.
(__gcov_ior_counter_op): Process IOR profile counter values.
(__gcov_delta_counter_op): Process delta profile counter values.
(__gcov_single_counter_op): Process single profile counter values.
(fp_scale): Callback function for float-point scaling.
(int_scale): Callback function for integer fraction scaling.
(gcov_profile_scale): Scaling profile counters.
(gcov_profile_normalize): Normalize profile counters.
* libgcc/libgcov.h: Add headers and functions for gcov-tool use.
(gcov_get_counter): New.
(gcov_get_counter_target): Ditto.
(struct gcov_info): Make the functions field mutable in gcov-tool
compilation.
* gcc/doc/gcc.texi: Include gcov-tool.texi.
* gcc/doc/gcov-tool.texi: Document for gcov-tool.
From-SVN: r212448
Currently it is not possible to build GCC's libjava support on Cygwin-64.
This patch fixes the current build-problems on Cygwin-64 and the most
fundamental bugs on that platform.
Note you must still add --enable-threads=posix to successfully build the
java language support.
boehm-gc/ChangeLog:
2014-05-13 Bernd Edlinger <bernd.edlinger@hotmail.de>
Fix current cygwin-64 build problems.
* include/gc_config_macros.h (GC_PTHREADS): Use __CYGWIN__ instead
of __CYGWIN32__ here.
* win32_threads.c (GC_push_all_stacks): Push all X86_64 registers.
(GC_get_thread_stack_base): Get the stack base for X86_64.
libffi/ChangeLog:
2014-05-13 Bernd Edlinger <bernd.edlinger@hotmail.de>
Fix current cygwin-64 build problems.
* src/java_raw_api.c: Remove if !defined(FFI_NO_RAW_API).
* src/x86/ffi.c: Add if defined(__CYGWIN__).
* src/x86/win64.S (ffi_closure_win64, ffi_call_win64): Added
handling for FFI_TYPE_UINT64, FFI_TYPE_POINTER and FFI_TYPE_INT.
Added SEH information. Fixed formatting.
libgcc/ChangeLog:
2014-05-13 Bernd Edlinger <bernd.edlinger@hotmail.de>
* unwind-seh.c (_Unwind_Backtrace): Uncommented, finished
implementation.
libjava/ChangeLog:
2014-05-13 Bernd Edlinger <bernd.edlinger@hotmail.de>
Fix current cygwin-64 build problems.
* configure.host: Added handling for x86_64-*-cygwin/mingw.
* boehm.cc (_Jv_GCAttachThread, _Jv_GCDetachThread): Don't compile if
GC_WIN32_THREADS is defined.
* java/lang/natClass.cc (_Jv_InterfaceAssignableFrom): Rename interface
to source_interface.
libjava/classpath/ChangeLog:
2014-05-13 Bernd Edlinger <bernd.edlinger@hotmail.de>
Fix current cygwin-64 build problems.
* native/fdlibm/mprec.c (_REENT_CHECK_MP, _REENT_MP_FREELIST,
_REENT_MP_P5S, __ULong, __Long): Undefine previous definitions.
From-SVN: r210386
2014-04-30 Bernd Edlinger <bernd.edlinger@hotmail.de>
Work around for current cygwin32 build problems.
* config/i386/cygming-crtbegin.c (__register_frame_info,
__deregister_frame_info, _Jv_RegisterClasses): Compile weak default
functions only for 64-bit systems.
From-SVN: r209942
2014-03-20 Joel Sherrill <joel.sherrill@oarcorp.com>
* config.host (v850*-*-*): Add to tmake_file instead of resetting
it. This was removing the v850*-*-rtems* settings.
From-SVN: r208708
PR libgcc/60472
* crtstuff.c (frame_dummy): Use void **jcr_list temporary
variable to avoid array subscript is above array bounds warnings.
Use __builtin_expect when checking *jcr_list for NULL.
From-SVN: r208457
2014-02-18 Kai Tietz <ktietz@redhat.com>
Jonathan Schleifer <js@webkeks.org>
PR objc/56870
* unwind-seh.c (_GCC_specific_handler): Pass proper
value to unwind-handler.
Co-Authored-By: Jonathan Schleifer <js@webkeks.org>
From-SVN: r207849
2014-01-25 Walter Lee <walt@tilera.com>
* config/tilepro/atomic.c: Include tconfig.h. Don't include
config.h or system.h.
(bool) Define.
From-SVN: r207088
2014-01-25 Walter Lee <walt@tilera.com>
* config/tilepro/atomic.c (pre_atomic_barrier): Mark inline.
(post_atomic_barrier): Ditto.
(__fetch_and_do): New macro.
(__atomic_fetch_and_do): Use __fetch_and_do.
(__sync_fetch_and_do): New macro.
(__sync_fetch_and_add_4): New function.
(__sync_fetch_and_sub_4): New function.
(__sync_fetch_and_or_4): New function.
(__sync_fetch_and_and_4): New function.
(__sync_fetch_and_xor_4): New function.
(__sync_fetch_and_nand_4): New function.
(__sync_fetch_and_add_8): New function.
(__sync_fetch_and_sub_8): New function.
(__sync_fetch_and_or_8): New function.
(__sync_fetch_and_and_8): New function.
(__sync_fetch_and_xor_8): New function.
(__sync_fetch_and_nand_8): New function.
(__do_and_fetch): New macro.
(__atomic_do_and_fetch): Use __do_and_fetch.
(__sync_do_and_fetch): New macro.
(__sync_add_and_fetch_4): New function.
(__sync_sub_and_fetch_4): New function.
(__sync_or_and_fetch_4): New function.
(__sync_and_and_fetch_4): New function.
(__sync_xor_and_fetch_4): New function.
(__sync_nand_and_fetch_4): New function.
(__sync_add_and_fetch_8): New function.
(__sync_sub_and_fetch_8): New function.
(__sync_or_and_fetch_8): New function.
(__sync_and_and_fetch_8): New function.
(__sync_xor_and_fetch_8): New function.
(__sync_nand_and_fetch_8): New function.
(__sync_exchange_methods): New macro.
(__sync_val_compare_and_swap_4): New function.
(__sync_bool_compare_and_swap_4): New function.
(__sync_lock_test_and_test_4): New function.
(__sync_val_compare_and_swap_8): New function.
(__sync_bool_compare_and_swap_8): New function.
(__sync_lock_test_and_test_8): New function.
(__subword_cmpxchg_body): New macro.
(__atomic_compare_exchange_1): Use __subword_cmpxchg_body.
(__atomic_compare_exchange_2): Ditto.
(__sync_subword_cmpxchg): New macro.
(__sync_val_compare_and_swap_1): New function.
(__sync_bool_compare_and_swap_1): New function.
(__sync_val_compare_and_swap_2): New function.
(__sync_bool_compare_and_swap_2): New function.
(__atomic_subword): Rename to ...
(__subword): ... New name.
(__atomic_subword_fetch): Use __subword.
(__sync_subword_fetch): New macro.
(__sync_fetch_and_add_1): New function.
(__sync_fetch_and_sub_1): New function.
(__sync_fetch_and_or_1): New function.
(__sync_fetch_and_and_1): New function.
(__sync_fetch_and_xor_1): New function.
(__sync_fetch_and_nand_1): New function.
(__sync_fetch_and_add_2): New function.
(__sync_fetch_and_sub_2): New function.
(__sync_fetch_and_or_2): New function.
(__sync_fetch_and_and_2): New function.
(__sync_fetch_and_xor_2): New function.
(__sync_fetch_and_nand_2): New function.
(__sync_add_and_fetch_1): New function.
(__sync_sub_and_fetch_1): New function.
(__sync_or_and_fetch_1): New function.
(__sync_and_and_fetch_1): New function.
(__sync_xor_and_fetch_1): New function.
(__sync_nand_and_fetch_1): New function.
(__sync_add_and_fetch_2): New function.
(__sync_sub_and_fetch_2): New function.
(__sync_or_and_fetch_2): New function.
(__sync_and_and_fetch_2): New function.
(__sync_xor_and_fetch_2): New function.
(__sync_nand_and_fetch_2): New function.
(__atomic_subword_lock): Use __subword.
(__sync_subword_lock): New macro.
(__sync_lock_test_and_set_1): New function.
(__sync_lock_test_and_set_2): New function.
From-SVN: r207087
2014-01-25 Walter Lee <walt@tilera.com>
* config/tilepro/atomic.c (BIT_OFFSET): Define.
(__atomic_subword_cmpxchg): Use BIT_OFFSET.
(__atomic_subword): Ditto.
From-SVN: r207086
2014-01-25 Walter Lee <walt@tilera.com>
* config/tilepro/atomic.c (__atomic_do_and_fetch): Add a
prefix op argument.
(__atomic_nand_fetch_4): Add prefix op.
(__atomic_nand_fetch_8): Ditto.
From-SVN: r207085
2014-01-08 Rong Xu <xur@google.com>
* gcc/gcov-io.c (gcov_var): Move from gcov-io.h.
(gcov_position): Ditto.
(gcov_is_error): Ditto.
(gcov_rewrite): Ditto.
* gcc/gcov-io.h: Refactor. Move gcov_var to gcov-io.h, and libgcov
only part to libgcc/libgcov.h.
* libgcc/libgcov-driver.c: Use libgcov.h.
(buffer_fn_data): Use xmalloc instead of malloc.
(gcov_exit_merge_gcda): Ditto.
* libgcc/libgcov-driver-system.c (allocate_filename_struct): Ditto.
* libgcc/libgcov.h: New common header files for libgcov-*.h.
* libgcc/libgcov-interface.c: Use libgcov.h
* libgcc/libgcov-merge.c: Ditto.
* libgcc/libgcov-profiler.c: Ditto.
* libgcc/Makefile.in: Add dependence to libgcov.h
From-SVN: r206435
libgcc:
* config/rs6000/ibm-ldouble.c (__gcc_qdiv): Scale up arguments in
case of small numerator and finite nonzero result.
gcc/testsuite:
* gcc.target/powerpc/rs6000-ldouble-3.c: New test.
From-SVN: r206310
gcc/
* common/config/arc/arc-common.c, config/arc/arc-modes.def,
config/arc/arc-protos.h, config/arc/arc.c, config/arc/arc.h,
config/arc/arc.md, config/arc/arc.opt, config/arm/arm_neon_builtins.def,
config/arm/crypto.def, config/i386/avx512cdintrin.h,
config/i386/avx512erintrin.h, config/i386/avx512fintrin.h,
config/i386/avx512pfintrin.h, config/i386/btver2.md,
config/i386/shaintrin.h, config/i386/slm.md, config/linux-protos.h,
config/linux.c, config/winnt-c.c, diagnostic-color.c,
diagnostic-color.h, gimple-ssa-isolate-paths.c, vtable-verify.c,
vtable-verify.h: Use the standard form for the copyright notice.
gcc/c-family/
* array-notation-common.c, c-cilkplus.c: Use the standard form for
the copyright notice.
gcc/c/
* c-array-notation.c: Use the standard form for the copyright notice.
gcc/cp/
* cp-array-notation.c, cp-cilkplus.c, vtable-class-hierarchy.c: Use
the standard form for the copyright notice.
gcc/testsuite/
* gcc.target/arc/arc.exp: Use the standard form for the copyright
notice.
libgcc/
* config/arc/asm.h, config/arc/crtg.S, config/arc/crtgend.S,
config/arc/crti.S, config/arc/crtn.S, config/arc/divtab-arc700.c,
config/arc/dp-hack.h, config/arc/fp-hack.h,
config/arc/ieee-754/adddf3.S, config/arc/ieee-754/addsf3.S,
config/arc/ieee-754/arc600-dsp/divdf3.S,
config/arc/ieee-754/arc600-dsp/divsf3.S,
config/arc/ieee-754/arc600-dsp/muldf3.S,
config/arc/ieee-754/arc600-dsp/mulsf3.S,
config/arc/ieee-754/arc600-mul64/divdf3.S,
config/arc/ieee-754/arc600-mul64/divsf3.S,
config/arc/ieee-754/arc600-mul64/muldf3.S,
config/arc/ieee-754/arc600-mul64/mulsf3.S,
config/arc/ieee-754/arc600/divsf3.S,
config/arc/ieee-754/arc600/mulsf3.S,
config/arc/ieee-754/divdf3.S, config/arc/ieee-754/divsf3-stdmul.S,
config/arc/ieee-754/divsf3.S, config/arc/ieee-754/divtab-arc-df.c,
config/arc/ieee-754/divtab-arc-sf.c, config/arc/ieee-754/eqdf2.S,
config/arc/ieee-754/eqsf2.S, config/arc/ieee-754/extendsfdf2.S,
config/arc/ieee-754/fixdfsi.S, config/arc/ieee-754/fixsfsi.S,
config/arc/ieee-754/fixunsdfsi.S, config/arc/ieee-754/floatsidf.S,
config/arc/ieee-754/floatsisf.S, config/arc/ieee-754/floatunsidf.S,
config/arc/ieee-754/gedf2.S, config/arc/ieee-754/gesf2.S,
config/arc/ieee-754/gtdf2.S, config/arc/ieee-754/gtsf2.S,
config/arc/ieee-754/muldf3.S, config/arc/ieee-754/mulsf3.S,
config/arc/ieee-754/orddf2.S, config/arc/ieee-754/ordsf2.S,
config/arc/ieee-754/truncdfsf2.S, config/arc/ieee-754/uneqdf2.S,
config/arc/ieee-754/uneqsf2.S, config/arc/initfini.c,
config/arc/lib1funcs.S, config/arc/t-arc, config/arc/t-arc-newlib,
config/cris/umulsidi3.S, config/msp430/cmpsi2.S,
config/msp430/epilogue.S, config/msp430/lib2bitcountHI.c,
config/msp430/lib2divHI.c, config/msp430/lib2divQI.c,
config/msp430/lib2divSI.c, config/msp430/lib2mul.c,
config/msp430/msp430-divmod.h, config/msp430/msp430-mul.h,
config/msp430/slli.S, config/msp430/srai.S, config/msp430/srli.S,
config/rl78/divmodhi.S, config/rl78/divmodqi.S, config/rl78/divmodsi.S,
config/rl78/signbit.S, vtv_end.c, vtv_end_preinit.c, vtv_start.c,
vtv_start_preinit.c: Use the standard form for the copyright notice.
libgomp/
* hashtab.h: Use the standard form for the copyright notice.
libstdc++-v3/
* testsuite/18_support/new_handler.cc,
testsuite/18_support/terminate_handler.cc,
testsuite/18_support/unexpected_handler.cc: Use the standard form for
the copyright notice.
From-SVN: r206288
contrib/
2013-12-31 Chung-Lin Tang <cltang@codesourcery.com>
* config-list.mk: Add nios2-elf, nios2-linux-gnu. Corrected
ordering of some configs.
gcc/
2013-12-31 Chung-Lin Tang <cltang@codesourcery.com>
Sandra Loosemore <sandra@codesourcery.com>
Based on patches from Altera Corporation
* config.gcc (nios2-*-*): Add nios2 config targets.
* configure.ac (TLS_SECTION_ASM_FLAG): Add nios2 case.
("$cpu_type"): Add nios2 as new cpu type.
* configure: Regenerate.
* config/nios2/nios2.c: New file.
* config/nios2/nios2.h: New file.
* config/nios2/nios2-opts.h: New file.
* config/nios2/nios2-protos.h: New file.
* config/nios2/elf.h: New file.
* config/nios2/elf.opt: New file.
* config/nios2/linux.h: New file.
* config/nios2/nios2.opt: New file.
* config/nios2/nios2.md: New file.
* config/nios2/predicates.md: New file.
* config/nios2/constraints.md: New file.
* config/nios2/t-nios2: New file.
* common/config/nios2/nios2-common.c: New file.
* doc/invoke.texi (Nios II options): Document Nios II specific
options.
* doc/md.texi (Nios II family): Document Nios II specific
constraints.
* doc/extend.texi (Function Specific Option Pragmas): Document
Nios II supported target pragma functionality.
gcc/testsuite/
2013-12-31 Sandra Loosemore <sandra@codesourcery.com>
Chung-Lin Tang <cltang@codesourcery.com>
Based on patches from Altera Corporation
* gcc.dg/stack-usage-1.c (SIZE): Define case for __nios2__.
* gcc.dg/20040813-1.c: Skip for nios2-*-*.
* gcc.dg/20020312-2.c: Add __nios2__ case.
* g++.dg/other/PR23205.C: Skip for nios2-*-*.
* g++.dg/other/pr23205-2.C: Skip for nios2-*-*.
* g++.dg/cpp0x/constexpr-rom.C: Skip for nios2-*-*.
* g++.dg/cpp0x/alias-decl-debug-0.C: Skip for nios2-*-*.
* g++.old-deja/g++.jason/thunk3.C: Skip for nios2-*-*.
* lib/target-supports.exp (check_profiling_available): Check for
nios2-*-elf.
* gcc.c-torture/execute/pr47237.x:: Skip for nios2-*-*.
* gcc.c-torture/execute/20101011-1.c: Skip for nios2-*-*.
* gcc.c-torture/execute/builtins/lib/chk.c (memset): Place
char-based memset loop before inline check, to prevent
problems when called to initialize .bss. Update comments.
* gcc.target/nios2/nios2.exp: New DejaGNU file.
* gcc.target/nios2/nios2-custom-1.c: New test.
* gcc.target/nios2/nios2-trap-insn.c: New test.
* gcc.target/nios2/nios2-builtin-custom.c: New test.
* gcc.target/nios2/nios2-builtin-io.c: New test.
* gcc.target/nios2/nios2-stack-check-1.c: New test.
* gcc.target/nios2/nios2-stack-check-2.c: New test.
* gcc.target/nios2/nios2-rdctl.c: New test.
* gcc.target/nios2/nios2-wrctl.c: New test.
* gcc.target/nios2/nios2-wrctl-zero.c: New test.
* gcc.target/nios2/nios2-wrctl-not-zero.c: New test.
* gcc.target/nios2/nios2-rdwrctl-1.c: New test.
* gcc.target/nios2/nios2-reg-constraints.c: New test.
* gcc.target/nios2/nios2-ashlsi3-one_shift.c: New test.
* gcc.target/nios2/nios2-mul-options-1.c: New test.
* gcc.target/nios2/nios2-mul-options-2.c: New test.
* gcc.target/nios2/nios2-mul-options-3.c: New test.
* gcc.target/nios2/nios2-mul-options-4.c: New test.
* gcc.target/nios2/nios2-nor.c: New test.
* gcc.target/nios2/nios2-stxio.c: New test.
* gcc.target/nios2/custom-fp-1.c: New test.
* gcc.target/nios2/custom-fp-2.c: New test.
* gcc.target/nios2/custom-fp-3.c: New test.
* gcc.target/nios2/custom-fp-4.c: New test.
* gcc.target/nios2/custom-fp-5.c: New test.
* gcc.target/nios2/custom-fp-6.c: New test.
* gcc.target/nios2/custom-fp-7.c: New test.
* gcc.target/nios2/custom-fp-8.c: New test.
* gcc.target/nios2/custom-fp-cmp-1.c: New test.
* gcc.target/nios2/custom-fp-conversion.c: New test.
* gcc.target/nios2/custom-fp-double.c: New test.
* gcc.target/nios2/custom-fp-float.c: New test.
* gcc.target/nios2/nios2-int-types.c: New test.
* gcc.target/nios2/nios2-cache-1.c: New test.
* gcc.target/nios2/nios2-cache-2.c: New test.
libgcc/
2013-12-31 Sandra Loosemore <sandra@codesourcery.com>
Chung-Lin Tang <cltang@codesourcery.com>
Based on patches from Altera Corporation
* config.host (nios2-*-*,nios2-*-linux*): Add nios2 host cases.
* config/nios2/lib2-nios2.h: New file.
* config/nios2/lib2-divmod-hi.c: New file.
* config/nios2/linux-unwind.h: New file.
* config/nios2/lib2-divmod.c: New file.
* config/nios2/linux-atomic.c: New file.
* config/nios2/t-nios2: New file.
* config/nios2/crti.asm: New file.
* config/nios2/t-linux: New file.
* config/nios2/lib2-divtable.c: New file.
* config/nios2/lib2-mul.c: New file.
* config/nios2/tramp.c: New file.
* config/nios2/crtn.asm: New file.
From-SVN: r206256
* config/i386/cpuinfo.c (enum vendor_signatures): Remove.
(__cpu_indicator_init): Use signature_INTEL_ebx and signature_AMD_ebx
from cpuid.h to check vendor signatures.
From-SVN: r206211
2013-12-04 Kugan Vivekanandarajah <kuganv@linaro.org>
* config/arm/bpapi-lib.h (TARGET_HAS_NO_HW_DIVIDE): Define for
architectures that do not have hardware divide instruction.
i.e. architectures that do not define __ARM_ARCH_EXT_IDIV__.
From-SVN: r205666
libgcc/ChangeLog:
2013-12-03 Adhemerval Zanella <azanella@linux.vnet.ibm.com>
* config/rs6000/ibm-ldouble.c (__gcc_qadd): Fix add
of normal number and qNaN to not raise an inexact exception.
gcc/testsuite/ChangeLog:
2013-12-03 Adhemerval Zanella <azanella@linux.vnet.ibm.com>
* gcc.target/powerpc/pr57363.c: New test.
From-SVN: r205645
2013-11-26 Matthew Leach <matthew.leach@arm.com>
* config/aarch64/linux-unwind.h (aarch64_fallback_frame_state): Check
for correct opcodes on BE.
From-SVN: r205479
* libgcov-driver.c (run_accounted): Make global level static.
(gcov_exit_merge_summary): Silence warning; do not clear
run_accounted here.
(gcov_exit): Clear it here.
From-SVN: r204993
* libgcov-driver.c (get_gcov_dump_complete): Update comments.
(all_prg, crc32): Remove static vars.
(gcov_exit_compute_summary): Rewrite to return crc32; do not clear
all_prg.
(gcov_exit_merge_gcda): Add crc32 parameter.
(gcov_exit_merge_summary): Add crc32 and all_prg parameter;
do not account run if it was already accounted.
(gcov_exit_dump_gcov): Add crc32 and all_prg parameters.
(gcov_exit): Initialize all_prg; update.
From-SVN: r204983
2013-11-14 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Alan Modra <amodra@gmail.com>
* config/rs6000/linux-unwind.h (ppc_fallback_frame_state): Correct
location of CR save area for 64-bit little-endian systems.
Co-Authored-By: Alan Modra <amodra@gmail.com>
From-SVN: r204800
2013-11-10 Kai Tietz <ktietz@redhat.com>
* config/i386/cygming-crtbegin.c (__gcc_register_frame):
Increment load-count on use of LIBGCC_SONAME DLL.
(hmod_libgcc): New static variable to hold handle of
LIBGCC_SONAME DLL.
(__gcc_deregister_frame): Decrement load-count of
LIBGCC_SONAME DLL.
From-SVN: r204635
uClibc can be built without fenv support, extend the configure check for
decimal floating point to probe the existance of fenv.h, too.
libgcc/ChangeLog:
2013-03-24 Bernhard Reutner-Fischer <aldot@gcc.gnu.org>
* configure.ac (libgcc_cv_dfp): Extend check to probe fenv.h
availability.
* configure: Regenerate
From-SVN: r204562
* config/i386/sfp-exceptions.c (__sfp_handle_exceptions): Handle
FP_EX_DENORM. Store result to volatile location after SSE division
to close interrupt window. Remove unneeded fwait after x87
division since interrupt window will be closed by emitted fstp.
From-SVN: r204540
gcc/
* config/i386/i386-c.c (ix86_target_macros): Define _SOFT_FLOAT
for !TARGET_80387.
* config/i386/rtemself.h (TARGET_OS_CPP_BUILTINS): Do not define
_SOFT_FLOAT here.
(LONG_DOUBLE_TYPE_SIZE): New define.
(LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Ditto.
libgcc/
* config/i386/32/sfp-machine.h (_FP_MUL_MEAT_S): Define.
(_FP_MUL_MEAT_D): Ditto.
(_FP_DIV_MEAT_S): Ditto.
(_FP_DIV_MEAT_D): Ditto.
* config.host (i[34567]86-*-rtems*): Remove i386/t-softfp, add
t-softfp-sfdf and t-softfp to tmake_file.
M gcc/config/i386/i386-c.c
M gcc/config/i386/rtemself.h
M gcc/ChangeLog
M libgcc/ChangeLog
M libgcc/config.host
M libgcc/config/i386/32/sfp-machine.h
From-SVN: r204404
* config.host (cpu_type) <Setting default>: Add entry for
crisv32-*-*.
(tmake_file) <crisv32-*-elf, cris-*-elf, cris-*-linux*>
<crisv32-*-linux*>: Adjust.
* longlong.h: Wrap the whole CRIS section in a single
defined(__CRIS__) conditional. Add comment about add_ssaaaa
and sub_ddmmss.
(COUNT_LEADING_ZEROS_0): Define when count_leading_zeros is
defined.
[__CRIS__] (__umulsidi3): Define.
[__CRIS__] (umul_ppmm): Define in terms of __umulsidi3.
* config/cris/sfp-machine.h: New file.
* config/cris/umulsidi3.S: New file.
* config/cris/t-elfmulti (LIB2ADD_ST): Add umulsidi3.S.
* config/cris/arit.c (SIGNMULT): New macro.
(__Div, __Mod): Use SIGNMULT instead of naked multiplication.
* config/cris/mulsi3.S: Tweak to avoid redundant register-copying;
saving 3 out of originally 33 cycles from the fastest
path, 3 out of 54 from the medium path and one from the longest
path. Improve comments.
From-SVN: r203640
gcc/
2013-10-15 Richard Biener <rguenther@suse.de>
* tree-tailcall.c (find_tail_calls): Don't use tail-call recursion
for built-in functions.
gcc/testsuite/
* gcc.dg/torture/builtin-self.c: New file.
libgcc/
* sync.c: Remove static aliases and define each function directly
under its real name.
From-SVN: r203628
libgcc:
PR gcov-profile/58127
* libgcov.c (__gcov_indirect_call_callee): Don't make this a
__thread var for emulated TLS.
(__gcov_indirect_call_counters): Likewise.
From-SVN: r201829
* config/mips/mips16.S (CE_STARTFN, CE_ENDFN): New macros.
(RET_FUNCTION): Use them in place of STARTFN and ENDFN.
(CALL_STUB_NO_RET): Likewise.
(CALL_STUB_RET): Likewise.
* config/mips/libgcc-mips16.ver: Remove __mips16_call_stub and
__mips16_ret call/return stub symbols.
* config.host <mips*-*-linux>: For non-R5900 add t-slibgcc-libgcc
to tmake_file.
Co-Authored-By: Catherine Moore <clm@codesourcery.com>
Co-Authored-By: Richard Sandiford <rdsandiford@googlemail.com>
From-SVN: r201805
* cgraph.h (cgraph_node): Add profile_id.
* value-prof.c (cgraph_node_map): Turn into pointer_map.
(init_node_map): Rewrite to handle hashes increas of incremental
IDs.
(del_node_map): Update.
(find_func_by_funcdef_no): Replace by ...
(find_func_by_profile_id): ... this one.
(gimple_ic_transform): Do not remove useful histograms when
speculation is not done; dump info when indirect call removal
can happen at LTO.
* value-prof.h (find_func_by_profile_id, gimple_ic): Declare.
* gcov-io.h (__gcov_indirect_call_profiler): Replace by ...
(__gcov_indirect_call_profiler_v2): .. this one.
* profile.h (init_node_map): Update.
* coverage.c (coverage_compute_profile_id): New function.
* coverage.h (coverage_compute_profile_id): Declare.
* tree-profile.c (init_ic_make_global_vars): Make
__gcov_indirect_call_callee and __gcov_indirect_call_counters global.
(gimple_init_edge_profiler): Update prototype of
__gcov_indirect_call_profiler.
(gimple_gen_ic_func_profiler): Simplify.
(tree_profiling): Use init_node_map
From-SVN: r201634
Commit the vtable verification feature. This feature is designed to
detect, at run time, if/when the vtable pointer in a C++ object has
been corrupted, before allowing virtual calls through that pointer.
If pointer corruption is detected, execution of the program is halted.
libstdc++-v3 ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* fragment.am: Add XTEMPLATE_FLAGS.
* configure.ac: Add definitions for --enable-vtable-verify.
* acinclude.m4: Add --enable-vtable-verify and
--disable-vtable-verify; define --enable-vtable-verify; define
VTV_CXXFLAGS, VTV_PCH_CXXFLAGS and VTV_CXXLINKFLAGS.
* config/abi/pre/gnu.ver: Export symbols for vtable verification.
* libsupc++/Makefile.am: Define vtv_sources and add it to
libsupc___la_SOURCES and libsupc__convenience_la_SOURCES.
* libsupc++/vtv_stubs.cc: New file.
* include/Makefile.am: Add VTV_PCH_CXXFLAGS to PCHFLAGS.
* src/Makefile.am: Add VTV_CXXFLAGS to AM_CXXFLAGS; add
VTV_CXXLINKFLAGS to CXXLINK.
* src/c++98/Makefile.am: Comment out XTEMPLATE_FLAGS; add VTV_CXXFLAGS
to AM_CXXFLAGS; add VTV_CXXXLINKFLAGS to CXXLINK.
* src/C++11/Makefile.am: Ditto.
* doc/xml/manual/configure.xml: Add entry for --enable-vtable-verify.
* scripts/testsuite_flags.in: Add cxxvtvflags to Usage; cause
cxxvtvflags to use VTV_CXXFLAGS and VTV_CXXLINKFLAGS.
* testsuite/lib/libstdc++.exp: Add cxxvtvflags; add code to locate
libvtv if --enable-vtable-verify was used; set cxxvtvflags; add
cxxvtvflags to cxx_final.
* testsuite/18_support/bad_exception/23591_thread-1.c: Add
-fvtable-verify=none to compiler flags.
* testsuite/17_intro/freestanding.cc: Add -fvtable-verify=none
to compiler flags.
* configure: Regenerated.
* Makefile.in: Regenerated.
* python/Makefile.in: Regenerated.
* include/Makefile.in: Regenerated.
* libsupc++/Makefile.in: Regenerated.
* config.h.in: Regenerated.
* po/Makefile.in: Regenerated.
* src/Makefile.in: Regenerated.
* src/c++98/Makefile.in: Regenerated.
* src/c++11/Makefile.in: Regenerated.
* doc/Makefile.in: Regenerated.
* testsuite/Makefile.in: Regenerated.
top level ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* configure.ac: Add target-libvtv to target_libraries; disable libvtv
on non-linux systems; add target-libvtv to noconfigdirs; add
libsupc++/.libs to C++ library search paths.
* configure: Regenerated.
* Makefile.def: Add libvtv to target_modules; make libvtv depend on
libstdc++ and libgcc.
* Makefile.in: Regenerated.
include/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* vtv-change-permission.h: New file.
contrib/ChangeLog:
2013-08-06 Caroline Tice4 <cmtice@google.com>
* gcc_update: Add libvtv files.
libgcc/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
config.host (extra_parts): Add vtv_start.o, vtv_end.o
vtv_start_preinit.o and vtv_end_preinit.o.
configure.ac: Add code to check/set enable_vtable_verify.
Makefile.in: Add rules to build vtv_*.o, if enable_vtable_verify is
true.
vtv_start_preinit.c: New file.
vtv_end_preinit.c: New file.
vtv_start.c: New file.
vtv_end.c: New file.
configure: Regenerated.
gcc/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* gcc.c (VTABLE_VERIFICATION_SPEC): New definition.
(LINK_COMMAND_SPEC): Add VTABLE_VERIFICATION_SPEC.
* tree-pass.h: Add pass_vtable_verify.
* varasm.c (assemble_variable): Add code to properly set the comdat
section and name for the .vtable_map_vars section.
(assemble_vtyv_preinit_initializer): New function.
(default_sectin_type_flags): Make sure .vtable_map_vars section has
LINK_ONCE flag.
* output.h: Add function decl for assemble_vtv_preinit_initializer.
* vtable-verify.c: New file.
* vtable-verify.h: New file.
* flag-types.h (enum vtv_priority): Defintions for flag_vtable_verify
initialiation levels.
* timevar.def (TV_VTABLE_VERIFICATION): New definition.
* passes.def: Insert pass_vtable_verify.
* aclocal.m4: Reorder includes.
* doc/invoke.texi: Add documentation for the flags -fvtable-verify=,
-fvtv-debug and -fvtv-counts.
* config/gnu-user.h (GNU_USER_TARGET_STARTFILE_SPEC): Add vtv_start*.o,
as appropriate, if -fvtable-verify=... is used.
(GNU_USER_TARGET_ENDFILE_SPEC): Add vtv_end*.o as appropriate, if
-fvtable-verify=... is used.
* Makefile.in (OBJS): Add vtable-verify.o to list.
(vtable-verify.o): Add new build rule.
(GTFILES): Add vtable-verify.c to list.
* common.opt (fvtable-verify=): New flag.
(vtv_priority): Values for fvtable-verify= flag.
(fvtv-counts): New flag.
(fvtv-debug): New flag.
* tree.h (save_vtable_map_decl): New extern function decl.
gcc/cp/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* Make-lang.in (*CXX_AND_OBJCXX_OBJS): Add vtable-class-hierarchy.o to
list.
(vtable-class-hierarchy.o): Add build rule.
* cp-tree.h (vtv_start_verification_constructor_init_function): New
extern function decl.
(vtv_finish_verification_constructor_init_function): New extern
function decl.
(build_vtbl_address): New extern function decl.
(get_mangled_vtable_map_var_name): New extern function decl.
(vtv_compute_class_hierarchy_transitive_closure): New extern function
decl.
(vtv_generate_init_routine): New extern function decl.
(vtv_save_class_info): New extern function decl.
(vtv_recover_class_info): New extern function decl.
(vtv_build_vtable_verify_fndecl): New extern function decl.
* class.c (finish_struct_1): Add call to vtv_save_class_info if
flag_vtable_verify is true.
* config-lang.in: Add vtable-class-hierarchy.c to gtfiles list.
* vtable-class-hierarchy.c: New file.
* mangle.c (get_mangled_vtable_map_var_name): New function.
* decl2.c (start_objects): Update function comment.
(cp_write_global_declarations): Call vtv_recover_class_info,
vtv_compute_class_hierarchy_transitive_closure and
vtv_build_vtable_verify_fndecl, before calling
finalize_compilation_unit, and call vtv_generate_init_rount after, IFF
flag_vtable_verify is true.
(vtv_start_verification_constructor_init_function): New function.
(vtv_finish_verification_constructor_init_function): New function.
* init.c (build_vtbl_address): Remove static qualifier from function.
libvtv/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
Initial check-in of new vtable verification feature.
* configure.ac : New file.
* acinclude.m4 : New file.
* Makefile.am : New file.
* aclocal.m4 : New file.
* configure.tgt : New file.
* configure: New file (generated).
* Makefile.in: New file (generated).
* vtv_set.h : New file.
* vtv_utils.cc : New file.
* vtv_utils.h : New file.
* vtv_malloc.cc : New file.
* vtv_rts.cc : New file.
* vtv_malloc.h : New file.
* vtv_rts.h : New file.
* vtv_fail.cc : New file.
* vtv_fail.h : New file.
* vtv_map.h : New file.
* scripts/run-testsuite.sh : New file.
* scripts/sum-vtv-counts.c : New file.
* testsuite/parts-test-main.h : New file.
* testusite/dataentry.cc : New file.
* testsuite/temp_deriv.cc : New file.
* testsuite/register_pair.cc : New file.
* testsuite/virtual_inheritance.cc : New file.
* testsuite/field-test.cc : New file.
* testsuite/nested_vcall_test.cc : New file.
* testsuite/template-list-iostream.cc : New file.
* testsuite/register_pair_inserts.cc : New file.
* testsuite/register_pair_inserts_mt.cc : New file.
* testsuite/event.list : New file.
* testsuite/parts-test-extra-parts-views.cc : New file.
* testsuite/parts-test-extra-parts-views.h : New file.
* testsuite/environment-fail-32.s : New file.
* testsuite/parts-test-extra-parts.h : New file.
* testsuite/temp_deriv2.cc : New file.
* testsuite/dlopen_mt.cc : New file.
* testsuite/event.h : New file.
* testsuite/template-list.cc : New file.
* testsuite/replace-fail.cc : New file.
* testsuite/Makefile.am : New file.
* testsuite/Makefile.in: New file (generated).
* testsuite/mempool_negative.c : New file.
* testsuite/parts-test-main.cc : New file.
* testsuite/event-private.cc : New file.
* testsuite/thunk.cc : New file.
* testsuite/event-defintiions.cc : New file.
* testsuite/event-private.h : New file.
* testsuite/parts-test.list : New file.
* testusite/register_pair_mt.cc : New file.
* testsuite/povray-derived.cc : New file.
* testsuite/event-main.cc : New file.
* testsuite/environment.cc : New file.
* testsuite/template-list2.cc : New file.
* testsuite/thunk_vtable_map_attack.cc : New file.
* testsuite/parts-test-extra-parts.cc : New file.
* testsuite/environment-fail-64.s : New file.
* testsuite/dlopen.cc : New file.
* testsuite/so.cc : New file.
* testsuite/temp_deriv3.cc : New file.
* testsuite/const_vtable.cc : New file.
* testsuite/mempool_positive.c : New file.
* testsuite/dup_name.cc : New file.
From-SVN: r201555
2013-07-23 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* config/s390/linux-unwind.h: Use the proper dwarf to hard reg
mapping for FPRs when creating the fallback framestate.
From-SVN: r201156
gcc/
PR target/57516
* config/avr/avr-fixed.md (round<mode>3_const): Turn expander to insn.
* config/avr/avr.md (adjust_len): Add `round'.
* config/avr/avr-protos.h (avr_out_round): New prototype.
(avr_out_plus): Add `out_label' argument.
* config/avr/avr.c (avr_out_plus_1): Add `out_label' argument.
(avr_out_plus): Pass down `out_label' to avr_out_plus_1.
Handle the case where `insn' is just a pattern.
(avr_out_bitop): Handle the case where `insn' is just a pattern.
(avr_out_round): New function.
(avr_adjust_insn_length): Handle ADJUST_LEN_ROUND.
libgcc/
PR target/57516
* config/avr/lib1funcs-fixed.S (__roundqq3, __rounduqq3)
(__round_s2_const, __round_u2_const)
(__round_s4_const, __round_u4_const, __round_x8):
Saturate result if addition result cannot be represented.
gcc/testsuite/
PR target/57516
* gcc.target/avr/torture/builtins-4-roundfx.c (test2hr, test2k):
Adjust to corrected rounding.
From-SVN: r201051
PR target/6526
* config/sh/lib1funcs.S (sdivsi3_i4, udivsi3_i4): Do not change bits
other than FPSCR.PR and FPSCR.SZ. Add SH4A implementation.
PR target/6526
* gcc.target/sh/pr6526.c: New.
From-SVN: r199873
* config/tilepro/atomic.h: Don't include stdint.h or features.h.
Replace int64_t with long long. Add __extension__ where
appropriate.
* config/tilepro/atomic.c: Include config.h.
From-SVN: r199855
* config/sparc/sol2-unwind.h (MD_FALLBACK_FRAME_STATE_FOR): Do not set
fs->signal_frame for SIGFPE raised for IEEE-754 exceptions.
* config/i386/sol2-unwind.h (x86_fallback_frame_state): Likewise.
From-SVN: r199381
* config/sparc/sol2-unwind.h (sparc64_frob_update_context): Do it for
signal frames as well.
(MD_FALLBACK_FRAME_STATE_FOR): Do minor cleanups throughout and add the
STACK_BIAS to the CFA offset.
From-SVN: r199191
libgcc/
* config.host: Match little-endian powerpc-linux.
gcc/
* config.gcc: Support little-endian powerpc-linux targets.
* config/rs6000/linux.h (LINK_OS_LINUX_EMUL): Define.
(LINK_OS_LINUX_SPEC): Define.
* config/rs6000/linuxspe.h (TARGET_DEFAULT):
Preserve MASK_LITTLE_ENDIAN.
* config/rs6000/default64.h (TARGET_DEFAULT): Likewise.
* config/rs6000/linuxaltivec.h (TARGET_DEFAULT): Likewise.
* config/rs6000/linux64.h (OPTION_LITTLE_ENDIAN): Don't zero.
(LINK_OS_LINUX_EMUL32, LINK_OS_LINUX_EMUL64): Define.
(LINK_OS_LINUX_SPEC32, LINK_OS_LINUX_SPEC64): Use above.
* config/rs6000/rs6000.c (output_toc): Don't use .tc for TARGET_ELF.
Correct fp word order for little-endian. Don't shift toc entries
smaller than a word for little-endian.
* config/rs6000/rs6000.md (bswaphi2, bswapsi2 split): Comment.
(bswapdi2 splits): Correct low-part subreg for little-endian.
Remove wrong BYTES_BIG_ENDIAN tests, and rename vars to remove
low/high where such is correct only for be.
* config/rs6000/sysv4.h (SUBTARGET_OVERRIDE_OPTIONS): Allow
little-endian for -mcall-aixdesc.
From-SVN: r198273
libgcc/
* config/aarch64/sfp-machine.h (_FP_W_TYPE): Change to define
as 'unsigned long long' instead of 'unsigned long'.
(_FP_WS_TYPE): Change to define as 'signed long long' instead of
'signed long'.
From-SVN: r198090
* config/arm/linux-atomic.c (SUBWORD_SYNC_OP, SUBWORD_VAL_CAS)
(SUBWORD_TEST_AND_SET): Use signed char/short types instead of
unsigned char/unsigned short.
(__sync_val_compare_and_swap_{1,2}): Handle signed argument.
From-SVN: r197806
libgcc/
2013-04-04 Meador Inge <meadori@codesourcery.com>
* config/arm/bpabi.S (aeabi_ldivmod): Add DWARF information for
computing the location of the link register.
(aeabi_uldivmod): Ditto.
From-SVN: r197493
PR tree-optimization/53265
* common.opt (Waggressive-loop-optimizations): New option.
* tree-ssa-loop-niter.c: Include tree-pass.h.
(do_warn_aggressive_loop_optimizations): New function.
(record_estimate): Call it. Don't add !is_exit bounds to loop->bounds
if number_of_latch_executions returned constant.
(estimate_numbers_of_iterations_loop): Call number_of_latch_executions
early. If number_of_latch_executions returned constant, set
nb_iterations_upper_bound back to it.
* cfgloop.h (struct loop): Add warned_aggressive_loop_optimizations
field.
* Makefile.in (tree-ssa-loop-niter.o): Depend on $(TREE_PASS_H).
* doc/invoke.texi (-Wno-aggressive-loop-optimizations): Document.
* gcc.dg/pr53265.c: New test.
* gcc.dg/torture/pr49518.c: Add -Wno-aggressive-loop-optimizations
to dg-options.
* g++.dg/opt/longbranch2.C (EBCOTLut): Double sizes of a2 and a3
arrays.
* gcc.dg/tree-ssa/cunroll-10.c (main): Rename to foo. Add argument
n, use it as high bound instead of 4.
* unwind-dw2.c (execute_cfa_program): Avoid
-Waggressive-array-optimizations warnings for DW_CFA_GNU_window_save
on targets with DWARF_FRAME_REGISTERS < 32.
* testsuite/libmudflap.c/fail37-frag.c: Add optimization barrier.
From-SVN: r196650
PR target/55431
* config/rs6000/linux-unwind.h (ppc_linux_aux_vector): Delete.
(ppc_fallback_frame_state): Always set up save locations for fp
and altivec. Don't bother with non-callee-saved regs, r0-r13
except for r2 on ppc64, fr0-fr13, v0-v19, vscr.
From-SVN: r196077
gcc/
PR target/54222
* config/avr/avr.md (unspec) <UNSPEC_ROUND>: Add.
* config/avr/avr-fixed.md (ALL4QA, ALL124QA): New mode iterators.
(round<mode>3, round<mode>3_const): New expanders for fixed-mode.
(*round<mode>3.libgcc): New insns for fixed-modes.
* config/avr/builtins.def (ABSxx): Use a non-NULL LIBNAME.
(ROUNDxx, COUNTLSxx, BITSxx, xxBITS): New DEF_BUILTINs.
(ROUNDFX, COUNTLSFX, ABSFX): New DEF_BUILTINs.
* config/avr/stdfix.h (absFX, bitsFX, FXbits): Remove inline
implementations. Define to __builtin_avr_absFX,
__builtin_avr_bitsFX, __builtin_avr_FXbits, respectively.
(roundFX, countlsFX): Define to __builtin_avr_roundFX,
__builtin_avr_countlsFX, respectively.
* config/avr/avr-c.c (target.h): Include it.
(enum avr_builtin_id): New enum.
(avr_resolve_overloaded_builtin): New static function.
(avr_register_target_pragmas): Use it to set
targetm.resolve_overloaded_builtin.
* config/avr/avr.c (avr_init_builtins): Supply myriads of local
tree nodes used by DEF_BUILTIN.
(avr_expand_builtin) <AVR_BUILTIN_ROUNDxx>: Sanity-check them.
(avr_fold_builtin) <AVR_BUILTIN_BITSxx>: Fold to VIEW_COVERT_EXPR.
<AVR_BUILTIN_xxBITS>: Same.
libgcc/
PR target/54222
* config/avr/lib2funcs.c: New C sources for modules for libgcc.a.
* config/avr/lib2-object.mk: New iterator to build objects from it.
* config/avr/t-avr: Iterate lib2-object.mk to build objects from
lib2funcs.c.
(LIB2FUNCS_EXCLUDE): Add _clrsbdi2.
(LIB1ASMFUNCS): Add: _ssabs_1, _mask1, _ret, _roundqq3, _rounduqq3,
_round_s2, _round_u2, _round_2_const, _addmask_2, _round_s4,
_round_u4, _round_4_const, _addmask_4, _round_x8, _rounddq3
_roundudq3, _roundda3 _rounduda3, _roundta3 _rounduta3.
* config/avr/lib1funcs-fixed.S: Implement them.
gcc/testsuite/
PR target/54222
* gcc.target/avr/torture/builtins-4-roundfx.c: New test.
* gcc.target/avr/torture/builtins-5-countlsfx.c: New test.
From-SVN: r195878
* config/v850/lib1funcs.S: Add support for e3v5 architecture
variant.
* config/v850/constraints.md (Q): Define as a memory constraint.
* config/v850/predicates.md (label_ref_operand): New predicate.
(e3v5_shift_operand): New predicate.
(ior_operator): New predicate.
* config/v850/t-v850: Add e3v5 multilib.
* config/v850/v850-protos.h (v850_adjust_insn_length): Prototype.
(v850_gen_movdi): Prototype.
* config/v850/v850.c: Add support for e3v5 architecture.
Rename all uses of TARGET_V850E || TARGET_V850E2_ALL to
TARGET_V850E_UP.
(construct_save_jarl): Add e3v5 long JARL support.
(v850_adjust_insn_length): New function. Adjust length of call
insns when using e3v5 instructions.
(v850_gen_movdi): New function: Generate instructions to move a
DImode value.
* config/v850/v850.h (TARGET_CPU_v850e3v5): Define.
(CPP_SPEC): Define __v850e3v5__ as appropriate.
(TARGET_USE_FPU): Enable for e3v5.
(CONST_OK_FOR_W): New macro.
(ADJUST_INSN_LENGTH): Define.
* config/v850/v850.md (UNSPEC_LOOP): Define.
(attr cpu): Add v850e3v5.
Rename all uses of TARGET_V850E2 to TARGET_V850E2V3_UP.
(movdi): New pattern.
(movdi_internal): New pattern.
(cbranchsf4): Conditionalize on TARGET_USE_FPU.
(cbranchdf4): Conditionalize on TARGET_USE_FPU.
(cstoresf4): Likewise.
(cstoredf4): Likewise.
(insv): New pattern.
(rotlso3_a): New pattern.
(rotlsi3_b): New pattern
(rotlsi3_v850e3v5): New pattern.
(doloop_begin): New pattern.
(fix_loop_counter): New pattern.
(doloop_end): New pattern.
(branch_normal): Add e3v5 long branch support.
(branch_invert): Likewise.
(branch_z_normal): Likewise.
(branch_z_invert): Likewise.
(branch_nz_normal): Likewise.
(branch_nz_invert): Likewise.
(call_internal_short): Add e3v5 register-indirect JARL support.
(call_internal_long): Likewise.
(call_value_internal_short): Likewise.
(call_value_internal_long): Likewise.
* config/v850/v850.opt (mv850e3v5, mv850e2v4): New options.
(mloop): New option.
* config.gcc: Add support for configuring v840e3v5 target.
* doc/invoke.texi: Document new v850 specific command line
options.
From-SVN: r195623
gcc: PR target/54663
* config.gcc (microblaze*-linux*): Add tmake_file to allow building
of microblaze-c.o.
libgcc:
* config.host(microblaze*-linux*): tmake_file: Remove
t-slibgcc-nolc-override, add t-slibgcc-libgcc.
* config/microblaze/t-microblaze: Set LIB2FUNCS_EXCLUDE
to exclude functions from being built with libgcc.c and use
the microblaze assembly.
From-SVN: r195488
2013-01-17 Yufeng Zhang <yufeng.zhang@arm.com>
* config/aarch64/sync-cache.c (__aarch64_sync_cache_range): Cast the
results of (dcache_lsize - 1) and (icache_lsize - 1) to the type
__UINTPTR_TYPE__; also cast 'base' to the same type before the
alignment operation.
From-SVN: r195266
* fixed-bit.c (SATFRACT) <FROM_TYPE=1, TO_TYPE=4>: Only
declare / set min_low, min_high if TO_MODE_UNSIGNED == 0.
(SATFRACT) <FROM_TYPE=TO_TYPE=4>: Only declare / set min_low,
min_high if FROM_MODE_UNSIGNED == 0 and TO_MODE_UNSIGNED == 0.
From-SVN: r195141