Make it possible for boards to override the kind of interrupt
to be signaled when the decr timer hits. The 405's signal PIT
interrupts while the 440's signal DECR.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
KVM on PowerPC used to have completely broken interrupt logic. Usually,
interrupts work by having a PIC that pulls a line up/down, so the CPU knows
that an interrupt is active. This line stays active until some action is
done to the PIC to release the line.
On KVM for PPC, we just checked if there was an interrupt pending and pulled
a line in the kernel module. We never released it though, hoping that kernel
space would just declare an interrupt as released when injected - which is
wrong.
To fix this, we need to completely redesign the interrupt injection logic.
Whenever an interrupt line gets triggered, we need to notify kernel space
that the line is up. Whenever it gets released, we do the same. This way
we can assure that the interrupt state is always known to kernel space.
This fixes random stalls in KVM guests on PowerPC that were waiting for
an interrupt while everyone else thought they received it already.
Signed-off-by: Alexander Graf <agraf@suse.de>
This function had been disabled from the beginning:
see 9fddaa0c0c
cpu_reset() function is in target-ppc/helper.c
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
For what I know DCR is always 32 bits wide, so we should also use uint32_t to
pass it along the stacks.
This fixes a warning when compiling qemu-system-ppc64 with KVM enabled, making
it compile without --disable-werror
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix the alternate time base the same way as the default timebase. SPR_ATBL
should return a 64-bit value on 64 bit implementations.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
On PPC we have a 64-bit time base. Usually (PPC32) this is accessed using
two separate 32 bit SPR accesses to SPR_TBU and SPR_TBL.
On PPC64 the SPR_TBL register acts as 64 bit though, so we get the full
64 bits as return value. If we only take the lower ones, fine. But Linux
wants to see all 64 bits or it breaks.
This patch makes PPC64 Linux work even after TB crossed the 32-bit boundary,
which usually happened a few seconds after bootup.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Changes:
(1) register pstrcpy_targphys() in rom list, it is used for kernel
command lines by a number of architectures.
(2) add rom_ptr() function to get a pointer for applying changes
to loaded images. Needed for example to tell the linux kernel
where it finds the initrd image by updating the header.
(3) make sparc use rom_ptr for initrd setup.
booting sparc-test works now, and 'info roms' shows this:
(qemu) info roms
addr=0000000000000000 size=0x2a3828 mem=ram name="phdr #0: vmlinux-2.6.11+tcx"
addr=00000000007ff000 size=0x00000e mem=ram name="cmdline"
addr=0000000000800000 size=0x400000 mem=ram name="/root/qemu-test/sparc-test/linux.img"
addr=0000000070000000 size=0x0e4000 mem=rom name="phdr #0: /home/kraxel/projects/qemu/build-zfull/pc-bios/openbios-sparc32"
reboot via 'system_reset' works too.
Patchworks-ID: 35262
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In the very least, a change like this requires discussion on the list.
The naming convention is goofy and it causes a massive merge problem. Something
like this _must_ be presented on the list first so people can provide input
and cope with it.
This reverts commit 99a0949b72.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Callers must pass ELF machine, byte swapping and symbol LSB clearing
information to ELF loader. A.out loader needs page size information, pass
that too as a parameter.
Extract prototypes to a separate file. Move loader.[ch] and elf_ops.h under hw.
Adjust callers. Also use target_phys_addr_t instead of target_ulong for
addresses: loader addresses aren't virtual.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Use parameter 'next' to fix the hdecr case.
Also pass 'next' by value instead of pointer (more easy to read and no
performance issue for an always_inline function).
Signed-off-by: Tristan Gingold <gingold@adacore.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This is a large patch that changes all occurrences of logfile/loglevel
global variables to use the new qemu_log*() macros.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6338 c046a42c-6fe2-441c-8c8c-71466251a162
Use macros to avoid #ifdefs on debugging code.
This patch doesn't try to merge logging macros from different files,
but just unify the debugging code #ifdefs onto a macro on each file. A
further cleanup can unify the debugging macros on a common header, later
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6332 c046a42c-6fe2-441c-8c8c-71466251a162
Use proper INPUT_NB definitions to allocate PowerPC input pins structure,
fixing a buffer overflow in the 6xx bus case.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3659 c046a42c-6fe2-441c-8c8c-71466251a162
Always make the hypervisor timers available.
Remove all TARGET_PPC64H checks, keeping a few if (0) tests for cases
that cannot be properly handled with the current PowerPC CPU definition.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3656 c046a42c-6fe2-441c-8c8c-71466251a162
* make PowerPC NVRAM accessors generic to be able to use a MacIO NVRAM
instead of the M48T59 one
* split PowerMac targets code:
- move all PowerMac related definitions and prototypes into hw/ppc_mac.h
- add hw/mac_dbdma.c, hw/mac_nvram.c and macio.c
which implements shared PowerMac devices
- define the g3bw machine in a new hw/ppc_oldworld.c file
* Fix the g3bw target:
- fix the Grackle host PCI device
- connect the Heathrow PIC to the PowerPC 6xx bus pins
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3475 c046a42c-6fe2-441c-8c8c-71466251a162
Protect PowerPC 64 only features with #ifdef (TARGET_PPC64)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3316 c046a42c-6fe2-441c-8c8c-71466251a162
(problem reported by Andreas Farber).
: ----------------------------------------------------------------------
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3292 c046a42c-6fe2-441c-8c8c-71466251a162
Share most code with the time-base management routines.
Remove time-base write routines from user-mode emulation environments.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3277 c046a42c-6fe2-441c-8c8c-71466251a162
* cleanup cpu.h, removing definitions used only in translate.c/translate_init.c
* add new flags to define instructions sets more precisely
* various changes in MMU models definitions
* add definitions for PowerPC 440/460 support (insns and SPRs).
* add definitions for PowerPC 401/403 and 620 input pins model
* Fix definitions for most PowerPC 401, 403, 405, 440, 601, 602, 603 and 7x0
* Preliminary support for PowerPC 74xx (aka G4) without altivec.
* Code provision for other PowerPC support (7x5, 970, ...).
* New SPR and PVR defined, from PowerPC 2.04 specification and other sources
* Misc code bugs, error messages and styles fixes.
* Update status files for PowerPC cores support.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3244 c046a42c-6fe2-441c-8c8c-71466251a162
Edgar E. Iglesias