This patch adds the byte and halfword variants of the Store Conditional
instructions. A common macro is introduced and the existing implementations
of stwcx. and stdcx. are refactored to use this macro.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the byte and halfword variants of the Load and
Reserve instructions. Since there is much commonality among
all forms of Load and Reserve, a macro is provided and the existing
implementations of lwarx and ldarx are refactoried to use this
macro.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds a flag for the atomic instructions introduced
in Power ISA V2.06B.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch addes the signed Divide Word Extended instructions
which were introduced in Power ISA 2.06B.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch addes the Unsigned Divide Word Extended instructions
which were introduced in Power ISA 2.06B.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Divide Doubleword Extended instructions.
The implementation builds on the unsigned helper provided in
the previous patch.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Divide Doubleword Extended Unsigned
instructions. This instruction requires dividing a 128-bit
value by a 64 bit value. Since 128 bit integer division is
not supported in TCG, a helper is used. An architecture
independent 128-bit division routine is added to host-utils.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
[agraf: use ||]
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds a flag for the Divide Extended instructions that
were introduced in Power ISA V2.06B. The flag is added to the
Power7 and Power8 models.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Bit Permute Doubleword (bpermd) instruction,
which was introduced in Power ISA 2.06 as part of the base 64-bit
architecture.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the non-signalling scalar conversion instructions:
- VSX Scalar Convert Single Precision to Double Precision
Non-Signalling (xscvspdpn)
- VSX Scalar Convert Double Precision to Single Precision
Non-Signalling (xscvdpspn)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX Scalar Round to Single Precision (xsrsp)
instruction.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Floating Merge Even Word (fmrgew) and Floating
Merge Odd Word (fmrgow) instructions.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Move To VSR instructions (mfvsrd, mfvsrwz)
and Move From VSR instructions (mtvsrd, mtvsrwa, mtvsrwz). These
instructions are unusual in that they are considered a floating
point instruction if the indexed VSR is in the first half of the
array (0-31) but they are considered vector instructions if the
indexed VSR is in the second half of the array (32-63).
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patchs adds the VSX Logical instructions that are new with
ISA V2.07:
- VSX Logical Equivalence (xxleqv)
- VSX Logical NAND (xxlnand)
- VSX Logical ORC (xxlorc)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX Scalar Convert Unsigned Integer Doubleword
to Floating Point Format and Round to Single Precision (xscvuxdsp)
and VSX Scalar Convert Signed Integer Douglbeword to Floating Point
Format and Round to Single Precision (xscvsxdsp) instructions.
The existing integer to floating point conversion macro (VSX_CVT_INT_TO_FP)
is modified to support the rounding of the intermediate floating point
result to single precision.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Single Precision VSX Scalar Fused Multiply-Add
instructions: xsmaddasp, xsmaddmsp, xssubasp, xssubmsp, xsnmaddasp,
xsnmaddmsp, xsnmsubasp, xsnmsubmsp.
The existing VSX_MADD() macro is modified to support rounding of the
intermediate double precision result to single precision.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX Scalar Reciprocal Square Root Estimate
Single Precision (xsrsqrtesp) instruction.
The existing VSX_RSQRTE() macro is modified to support rounding
of the intermediate double-precision result to single precision.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX Scalar Square Root Single Precision (xssqrtsp)
instruction.
The existing VSX_SQRT() macro is modified to support rounding of the
intermediate double-precision result to single-precision.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX Scalar Reciprocal Estimate Single Precision
(xsresp) instruction.
The existing VSX_RE macro is modified to support rounding of the
intermediate double precision result to single precision.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX Scalar Divide Single Precision (xsdivsp)
instruction.
The existing VSX_DIV macro is modified to support rounding of the
intermediate double precision result to single precision.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX Scalar Multiply Single-Precision (xsmulsp)
instruction.
The existing VSX_MUL macro is modified to support rounding of the
intermediate result to single precision.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX Scalar Add Single-Precision (xsaddsp) and
VSX Scalar Subtract Single-Precision (xssubsp) instructions.
The existing VSX_ADD_SUB macro is modified to support the rounding
of the (intermediate) result to single-precision.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds two store scalar instructions:
- Store VSX Scalar as Integer Word Indexed (stxsiwx)
- Store VSX Scalar Single-Precision Indexed (stxsspx)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch refactors the stxsdx instruction. Reusable code is
extracted into a macro which will be used in subsequent patches
in this series.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the scalar load instructions introduced in ISA
V2.07:
- Load VSX Scalar as Integer Word Algebraic Indexd (lxsiwax)
- Load VSX Scalar as Integer Word and Zero Indexed (lxsiwzx)
- Load VSX Scalar Single-Precision Indexed (lxsspx)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch refactors the lxsdx generator. Resuable code is isolated
into a macro. The macro will be used in subsequent patches in this
series to implement other scalar load instructions.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds a flag to identify those VSX instructions that are
new to Power ISA V2.07. The flag is added to the Power 8 processor
initialization so that the P8 models understand how to decode and
emulate instructions in this category.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX instructions that convert between floating
point formats: xscvdpsp, xscvspdp, xvcvdpsp, xvcvspdp.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX floating point compare vector instructions:
- xvcmpeqdp[.], xvcmpgedp[.], xvcmpgtdp[.]
- xvcmpeqsp[.], xvcmpgesp[.], xvcmpgtsp[.]
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX floating point maximum and minimum
instructions:
- xsmaxdp, xvmaxdp, xvmaxsp
- xsmindp, xvmindp, xvminsp
Because of the Power ISA definitions of maximum and minimum
on various boundary cases, the standard softfloat comparison
routines (e.g. float64_lt) do not work as well as one might
think. Therefore specific routines for comparing 64 and 32
bit floating point numbers are implemented in the PowerPC
helper code.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX scalar floating point compare ordered
and unordered instructions.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX floating point test for software square
root instructions defined by V2.06 of the PowerPC ISA: xstsqrtdp,
xvtsqrtdp, xvtsqrtsp.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX floating point test for software divide
instructions defined by V2.06 of the PowerPC ISA: xstdivdp, xvtdivdp,
and xvtdivsp.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX floating point reciprocal square root
estimate instructions defined by V2.06 of the PowerPC ISA: xsrsqrtedp,
xvrsqrtedp, xvrsqrtesp.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX floating point square root instructions
defined by V2.06 of the PowerPC ISA: xssqrtdp, xvsqrtdp, xvsqrtsp.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX floating point reciprocal estimate instructions
defined by V2.06 of the PowerPC ISA: xsredp, xvredp, xvresp.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX floating point divide instructions defined
by V2.06 of the PowerPC ISA: xsdivdp, xvdivdp, xvdivsp.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX floating point multiply instructions defined
by V2.06 of the PowerPC ISA: xsmuldp, xvmuldp, xvmulsp.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the floating point addition and subtraction
instructions defined by V2.06 of the PowerPC ISA: xssubdp,
xvsubdp and xvsubsp.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds general support that will be used by the VSX helper
routines:
- a union describing the various VSR subfields.
- access routines to get and set VSRs
- VSX decoders
- a general routine to generate a handler that invokes a VSX
helper.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The fload_invalid_op_excp() function sets assorted invalid
operation status bits. However, it also implicitly modifies
the FPRF field of the PowerPC FPSCR. Many VSX instructions
set invalid operation bits but do not alter FPRF. Thus the
function is more generally useful if the setting of the FPRF
field is made conditional via a parameter.
All invocations of this routine in existing instructions are
modified to pass 1 and thus retain their current behavior.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The Figure 17 "SPR encodings" of the PowerISA 2.07 describes CTRL SPR as:
priviledged
# spr5-9 spr0-4 name mtspr mfspr len cat
136 00100 01000 CTRL - no 32 S
152 00100 11000 CTRL yes - 32 S
According to this chart, the hypervisor's CTRL (#152) does not support
reading, the user-space's CTRL (UCTRL, #136) does not support writing.
This replaces unsupported operations with the default SPR_NOACCESS hook.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
The LPCR special purpose register was introduced with the PowerPC 970MP family.
This patch initializes LPCR for the following families:
- 970 MP
- POWER5+
- POWER7
- POWER8
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Due to missing @one_reg_id assignment in _spr_register(),
the kvm_get_one_reg/kvm_set_one_reg API has never really been working.
This reenables the API by assigning the @one_reg_id field in the SPR
descriptor.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
commit f80872e21c (mmu-hash64: Implement
Virtual Page Class Key Protection) added a new page protection
mechanism based on page keys and the AMR register to control access.
The AMR register allows or prohibits reads and/or writes on a page
depending on the control bits associated to the key. A store or a load
is only permitted if the associate bit is 0 (Power ISA), and not 1 as
the code is currently doing. This patch modifies ppc_hash64_amr_prot()
to correct the protection check.
This issue was unvailed by commit ccfb53ed6360cac0d5f6f7915ca9ae7eed866412
(target-ppc: fix Authority Mask Register init value) which changed the
initialisation value of the AMR register to 0.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The existing default value (-1) of the AMR register forbids data access
to all 32 classes. Since the guest linux does not change this register,
we end up with the guest hanging right after switching from the real to
protected mode.
This sets the default AMR value to zero what enables data access for all
classes.
The only reason for not hitting this bug before is that
kvm_arch_put_registers() did not put any SPR to KVM due to missing
assignment of @one_reg_id in _spr_register() (which is going to be fixed
by a separate patch).
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The DAR and DSISR can be very useful when debugging issues, so add
them to ppc_cpu_dump_state. We had another bug in this area: all
of the v2.06 MMU types were missing.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
SPR_750FX_HID2 and L2CR are not defined in 970* user manuals nor POWER5
bookIV nor PowerISA 2.04, the numbers assigned to them are not defined
either so remove them.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
PowerISA 2.04+ puts MMUCFG and MMUCSR0 SPRs to "E" (embedded) category so
remove it from POWER7/8 class as it is "S" (server) category.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Assuming that "U" in SPR_UCTRL is for "user", there is inconsistency with
970 user manuals/P5-bookIV/PowerISA204 which define the number as:
priviledged
# spr5-9 spr0-4 name mtspr mfspr len cat
136 00100 01000 CTRL - no 32 S
152 00100 11000 CTRL yes - 32 S
This swaps the numbers. No effect from this change is expected though.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
The 970GX definition was added in 2007 and it made sense then but this
version has never been released to the markets and it does not exist in
the real world so there is no point in emulating it.
This removes 970GX.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
PowerISA defines LPCR SPR number as 318=0x13E but QEMU uses the value of
316.
This fixes the definition of LPCR SPR.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Since last use of PPC_DUMP_CPU by whoever he/she was, env->tlb became
a union and POWERPC CPU class got QOM'ed so defining PPC_DUMP_CPU
breaks compile.
This fixes compiler errors.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
* QTest cleanups and test cases for PCI NICs
* NAND fix for "info qtree"
* Cleanup and extension of QOM machine tests
* IndustryPack test cases and conversion to QOM realize
* I2C cleanups
* Cleanups of legacy qdev properties
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQIcBAABAgAGBQJTAooJAAoJEPou0S0+fgE/SuQQALW3zvra4ZLRAQV0e8kFoyj1
vVtmLkDhnCe4cYfxxfOX91NA0rH1ts2EO1+UcnaCHJlptNWfA+8qJW69XgYpHE3c
DKQlKPL/9pV5ywY5uUw/t1UJHg2BfrLBDDM4lP+vrpwiQYq4kp24JffnhfY3l9MA
9qdkXu1HrlWoLRVGnMyGDXI8cb+5bTL+FEc6UuHl3P89/gj5BV+LDWn0QOFbAkxq
4wk+Xh6sHKcfOdq6vMCNGlTjlJnpbY43D1a8+q6hFGG8JBlpne7Oer7bse9k4uTK
q/CzyNzC0lnjjcULpa4ptRlycH0ruD9DPY7Lco9XqYd3l/c9742PmTEqN5TZseKD
XD7+hwT1tk7W8rihm8KETCP6sKlXz4w8tJiWe6IT3zwRzvXIolxxK93heQuaX73Z
HFDmvTPVLUiWF8ftKTyWZM3w+jsbSH0QSrMCIHKJrPTRWTKphx0DUP74lWjNsvGs
FFBjpAgrflLihxiuRrcLmekGn0xCTjhQWIo2GoiWTgLSEHNQQQUNO+15/kcU/vlI
hh3DJpiBKeSnUapHHL0OEK6ryeHoG95akiRjImwWVthNLk4KEuWtlhFPYBtulO5A
PA02trE4Ah769effX0ZYdNl23KbW4VxpZ8VZv+kp7RTrDKxw551HoEFJ5ja0nkvB
O1CfsE7x0GH/Rbi/Hxhu
=KRcc
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' into staging
QOM infrastructure fixes and device conversions
* QTest cleanups and test cases for PCI NICs
* NAND fix for "info qtree"
* Cleanup and extension of QOM machine tests
* IndustryPack test cases and conversion to QOM realize
* I2C cleanups
* Cleanups of legacy qdev properties
# gpg: Signature made Mon 17 Feb 2014 22:15:37 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
* remotes/afaerber/tags/qom-devices-for-peter: (49 commits)
qtest: Include system headers before user headers
qapi: Refine human printing of sizes
qdev: Use QAPI type names for properties
qdev: Add enum property types to QAPI schema
block: Handle "rechs" and "large" translation options
qdev: Remove hex8/32/64 property types
qdev: Remove most legacy printers
qdev: Use human mode in "info qtree"
qapi: Add human mode to StringOutputVisitor
qdev: Inline qdev_prop_parse()
qdev: Legacy properties are just strings
qdev: Legacy properties are now read-only
qdev: Remove legacy parsers for hex8/32/64
qdev: Sizes are now parsed by StringInputVisitor
qapi: Add size parser to StringInputVisitor
qtest: Don't segfault with invalid -qtest option
ipack: Move IndustryPack out of hw/char/
ipoctal232: QOM parent field cleanup
ipack: QOM parent field cleanup for IPackDevice
ipack: QOM parent field cleanup for IPackBus
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We now have to pass an address space to our _phys helpers. During the
transition apparently the EPR exit path missed out, so let's put it there.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Not only 44x CPUs (BookE) but also 40x CPUs can run with 1k page size.
Move the criteria to a central inline function to avoid repetition
and #ifdef'fery. Update qom-test to no longer exempt them.
Signed-off-by: Andreas Färber <afaerber@suse.de>
The recent VSX patches broken compilation of QEMU when configurated
with --enable-debug, as it was treating "target long" TCG variables
as "i64" which is not true for 32bit targets.
This patch fixes all the places that the compiler has found to use
the correct variable type and if necessary manually cast.
Reported-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
We generate different code depending on whether MSR_VSX is set or
clear, so it needs to be part of our hflags too which indicate whether
we're still in the same translation block cache bucket.
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX Shift Left Double by Word Immediate
(xxsldwi) instruction.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX Splat Word (xxsplatw) instruction.
This is the first instruction to use the UIM immediate field
and consequently a decoder is also added.
V2: reworked implementation per Richard Henderson's comments.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX Select (xxsel) instruction.
The xxsel instruction has four VSR operands. Thus the xC
instruction decoder is added.
The xxsel instruction is massively overloaded in the opcode
table since only bits 26 and 27 are opcode bits. This
overloading is done in matrix fashion with two macros
(GEN_XXSEL_ROW and GEN_XX_SEL).
V2: (1) eliminated unecessary XXSEL macro (2) tighter implementation
using tcg_gen_andc_i64.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX Merge High Word and VSX Merge Low Word
instructions.
V2: Now implemented using deposit (per Richard Henderson's comment)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX logical instructions that are defined
by the Version 2.06 Power ISA (aka Power7):
- xxland
- xxlandc
- xxlor
- xxlxor
- xxlnor
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX scalar move instructions:
- xsabsdp (Scalar Absolute Value Double-Precision)
- xsnabspd (Scalar Negative Absolute Value Double-Precision)
- xsnegdp (Scalar Negate Double-Precision)
- xscpsgndp (Scalar Copy Sign Double-Precision)
A common generator macro (VSX_SCALAR_MOVE) is added since these
instructions vary only slightly from each other.
Macros to support VSX XX2 and XX3 form opcodes are also added.
These macros handle the overloading of "opcode 2" space (instruction
bits 26:30) caused by AX and BX bits (29 and 30, respectively).
V3: Per feedback from Paolo Bonzini, moved the sign mask into a
temporary and used andc.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
So far POWER7+ was a part of POWER7 family. However it has a different
PVR base value so in order to support PVR masks, it needs a separate
family class.
This adds a new family class, PVR base and mask values and moves
Power7+ v2.1 CPU to a new family. The class init function is copied
from the POWER7 family.
This defines a firmware name for the new family as "PowerPC,POWER7+"
instead of previously used "PowerPC,POWER7" from the POWER7 family.
The reason for that is that the Sapphire firmware (a h0st firmware)
uses "PowerPC,POWER7+" already and since no specification defines
exactly the CPU nodes naming in the device tree, we better stay
in sync with the host firmware.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Store VSX Vector Word*4 Indexed (stxvw4x)
instruction.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Store VSX Scalar Doubleword Indexed (stxsdx)
instruction.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Load VSX Vector Word*4 Indexed (lxvw4x)
instruction.
V2: changed to use deposit_i64 per Richard Henderson's review.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Load VSX Vector Doubleword & Splat Indexed
(lxvdsx) instruction.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Load VSX Scalar Doubleowrd Indexed (lxsdx)
instruction.
The lower 8 bytes of the target register are undefined; this
implementation leaves those bytes unaltered.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the xxpermdi instruction. The instruction
uses bits 22, 23, 29 and 30 for non-opcode fields (DM, AX
and BX). This results in overloading of the opcode table
with aliases, which can be seen in the GEN_XX3FORM_DM
macro.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the stxvd2x instruction.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the lxvd2x instruction.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds VSX VSRs to the the list of global register indices.
More specifically, it adds the lower halves of the first 32 VSRs to
the list of global register indices. The upper halves of the first
32 VSRs are already defined via cpu_fpr[]. And the second 32 VSRs
are already defined via the cpu_avrh[] and cpu_avrl[] arrays.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds decoders for the VSX fields XT, XS, XA, XB and
DM. The first four are split fields and a general helper for
these types of fields is also added.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds support for the VSX bit of the PowerPC Machine
State Register (MSR) as well as the corresponding VSX Unavailable
exception.
The VSX bit is added to the defined bits masks of the Power7 and
Power8 CPU models.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the flag POWERPC_FLAG_VSX to the list of defined
flags and also adds this flag to the list of supported features of
the Power7 and Power8 CPUs. Additionally, the VSX instructions
are added to the list of TCG-enabled instruction.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
IBM POWERPC processors encode PVR as a CPU family in higher 16 bits and
a CPU version in lower 16 bits. Since there is no significant change
in behavior between versions, there is no point to add every single CPU
version in QEMU's CPU list. Also, new CPU versions of already supported
CPU won't break the existing code.
This adds PVR value/mask support for KVM, i.e. for -cpu host option.
As CPU family class name for POWER7 is "POWER7-family", there is no need
to touch aliases.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
The latest update to v3.13-rc3 (bf63839f) breaks the
ppc build with KVM:
kvm-all.o: In function `kvm_update_guest_debug':
kvm-all.c:1910: undefined reference to `kvm_arch_update_guest_debug'
kvm-all.o: In function `kvm_insert_breakpoint':
kvm-all.c:1937: undefined reference to `kvm_arch_insert_sw_breakpoint'
kvm-all.c:1945: undefined reference to `kvm_arch_insert_hw_breakpoint'
kvm-all.o: In function `kvm_remove_breakpoint':
kvm-all.c:1977: undefined reference to `kvm_arch_remove_sw_breakpoint'
kvm-all.c:1985: undefined reference to `kvm_arch_remove_hw_breakpoint'
kvm-all.o: In function `kvm_remove_all_breakpoints':
kvm-all.c:2009: undefined reference to `kvm_arch_remove_sw_breakpoint'
kvm-all.c:2006: undefined reference to `kvm_arch_remove_sw_breakpoint'
kvm-all.c:2017: undefined reference to `kvm_arch_remove_all_hw_breakpoints'
We need stubs until something gets implemented.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Instead of relying on cpu_model, obtain the device tree node label
per CPU. Use DeviceClass::fw_name as source.
Whenever DeviceClass::fw_name is unknown, default to "PowerPC,UNKNOWN".
As a consequence, spapr_fixup_cpu_dt() can operate on each CPU's fw_name,
obsoleting sPAPREnvironment::cpu_model, and spapr_create_fdt_skel() can
drop its cpu_model argument.
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Set the expected values for POWER7, POWER7+, POWER8 and POWER5+.
Note that POWER5+ and POWER7+ are intentionally lacking the '+', so the
lack of a POWER7P family constitutes no problem.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch add support for dumping guest memory using dump-guest-memory
monitor command.
Before patch:
(qemu) dump-guest-memory testcrash
this feature or command is not currently supported
(qemu)
After patch:
(qemu) dump-guest-memory testcrash
(qemu)
crash was able to read the file
crash> bt
PID: 0 TASK: c000000000c0d0d0 CPU: 0 COMMAND: "swapper/0"
R0: 0000000028000084 R1: c000000000cafa50 R2: c000000000cb05b0
R3: 0000000000000000 R4: c000000000bc4cb0 R5: 0000000000000000
R6: 001efe93b8000000 R7: 0000000000000000 R8: 0000000000000000
R9: b000000000001032 R10: 0000000000000001 R11: 0001eb2117e00d55
....
...
NOTE: Currently crash tools doesn't look at ELF notes in the dump on ppc64.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Instead of opencoding 64 use MAX_SLB_ENTRIES. We don't update the kernel
header here.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Without this, a value of rb=0 and rs=0 results in replacing the 0th
index. This can be observed when using gdb remote debugging support.
(gdb) x/10i do_fork
0xc000000000085330 <do_fork>: Cannot access memory at address 0xc000000000085330
(gdb)
This is because when we do the slb sync via kvm_cpu_synchronize_state,
we overwrite the slb entry (0th entry) for 0xc000000000085330
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Recent PowerKVM allows the kernel to intercept some RTAS calls from the
guest directly. This is used to implement the more efficient in-kernel
XICS for example. qemu is still responsible for assigning the RTAS token
numbers however, and needs to tell the kernel which RTAS function name is
assigned to a given token value. This patch adds a convenience wrapper for
the KVM_PPC_RTAS_DEFINE_TOKEN ioctl() which is used for this purpose.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Commit 2345f1c01 was supposed to render L2CR writes into noops. Instead,
it made them illegal instruction traps which apparently didn't confuse
XNU, but can easily confuse other OSs.
Fix it up by actually doing nothing when we write to L2CR.
Reported-by: Julio Guerra <guerr@julio.in>
Signed-off-by: Alexander Graf <agraf@suse.de>
Tested-by: Julio Guerra <guerr@julio.in>
The Load Vector Element (lve*x) and Store Vector Element (stve*x)
instructions not only byte-swap in Little Endian mode, they also
invert the element that is accessed. For example, the RTL for
lvehx contains this:
eb <-- EA[60:63]
if Big-Endian byte ordering then
VRT[8*eb:8*eb+15] <-- MEM(EA,2)
else
VRT[112-(8*eb):127-(8*eb)] <-- MEM(EA,2)
This patch adds the element inversion, as described in the last line
of the RTL.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
# By Peter Maydell (3) and Ákos Kovács (2)
# Via Paolo Bonzini
* bonzini/configure:
ui/Makefile.objs: delete unnecessary cocoa.o dependency
default-configs/: CONFIG_GDBSTUB_XML removed
Makefile.target: CONFIG_NO_* variables removed
rules.mak: New string testing functions
rules.mak: New logical functions for handling y/n values
CONFIG_NO_* variables replaced with the lnot logical function
Signed-off-by: Ákos Kovács <akoskovacs@gmx.com>
[PMM: fixed a few CONFIG_NO_* uses that were missed]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
# By Richard Henderson
# Via Richard Henderson
* rth/tcg-pull:
exec: Add both big- and little-endian memory helpers
tcg: Add qemu_ld_st_i32/64
tcg: Add TCGMemOp
configure: Remove CONFIG_QEMU_LDST_OPTIMIZATION
tcg: Add tcg-be-ldst.h
tcg: Add tcg-be-null.h
exec: Delete is_tcg_gen_code and GETRA_EXT
tcg-aarch64: Update to helper_ret_*_mmu routines
tcg: Merge tcg_register_helper into tcg_context_init
tcg: Add tcg-runtime.c helpers to all_helpers
tcg: Put target helper data into an array.
tcg: Remove stray semi-colons from target-*/helper.h
tcg: Move helper registration into tcg_context_init
target-m68k: Rename helpers.h to helper.h
tcg: Use a GHashTable for tcg_find_helper
tcg: Delete tcg_helper_get_name declaration
tcg-hppa: Remove tcg backend
Message-id: 1381440525-6666-1-git-send-email-rth@twiddle.net
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
During GEN_HELPER=1, these are actually stray top-level semi-colons
which are technically invalid ISO C, but GCC accepts as an extension.
If we added enough __extension__ markers that we could dare use
-Wpedantic, we'd see
warning: ISO C does not allow extra ‘;’ outside of a function
This will become a hard error in the next patch, wherein those ; will
appear in the middle of a data structure.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Since this is only read in cpu_copy() and linux-user has a global
cpu_model, drop the field from generic code.
Signed-off-by: Andreas Färber <afaerber@suse.de>
The x86 and ppc targets call cpu_synchronize_state() from their
*_cpu_dump_state() callbacks to ensure that up to date state is dumped
when KVM is enabled (for example when a KVM internal error occurs).
Move this call up into the generic cpu_dump_state() function so that
other KVM targets (namely MIPS) can take advantage of it.
This requires kvm_cpu_synchronize_state() and cpu_synchronize_state() to
be moved out of the #ifdef NEED_CPU_H in <sysemu/kvm.h> so that they're
accessible to qom/cpu.c.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Alexander Graf <agraf@suse.de>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: qemu-ppc@nongnu.org
Cc: kvm@vger.kernel.org
Signed-off-by: Gleb Natapov <gleb@redhat.com>
* 'tcg-next' of git://github.com/rth7680/qemu: (29 commits)
tcg-i386: Make use of zero-extended memory helper routines
tcg: Introduce zero and sign-extended versions of load helpers
exec: Split softmmu_defs.h
target: Include softmmu_exec.h where forgotten
exec: Rename USUFFIX to LSUFFIX
tcg-i386: Don't perform GETPC adjustment in TCG code
exec: Reorganize the GETRA/GETPC macros
configure: Allow x32 as a host
tcg-i386: Adjust tcg_out_tlb_load for x32
tcg-i386: Use intptr_t appropriately
tcg: Fix jit debug for x32
tcg: Use appropriate types in tcg_reg_alloc_call
tcg: Change tcg_out_ld/st offset to intptr_t
tcg: Change tcg_gen_exit_tb argument to uintptr_t
tcg: Use uintptr_t in TCGHelperInfo
tcg: Change relocation offsets to intptr_t
tcg: Change memory offsets to intptr_t
tcg: Change frame pointer offsets to intptr_t
tcg: Define TCG_ptr properly
tcg: Define TCG_TYPE_PTR properly
...
Several targets forgot to include softmmu_exec.h, which would
break them with a header cleanup to follow.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The function qemu_notify_event is defined by a header that we don't
include in the PPC KVM code. Include it to get the code building
again.
target-ppc/kvm_ppc.c: In function 'kvmppc_timer_hack':
target-ppc/kvm_ppc.c:26:5: error: implicit declaration of function 'qemu_notify_event' [-Werror=implicit-function-declaration]
target-ppc/kvm_ppc.c:26:5: error: nested extern declaration of 'qemu_notify_event' [-Werror=nested-externs]
Signed-off-by: Alexander Graf <agraf@suse.de>
Use SLB_ESID_V instead of (1 << 27) in the code
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Bit extraction for the FP BF and L field of the MTFSFI and MTFSF
instructions is wrong and doesn't match the reference manual (which
explain the bit number in big endian format). It has been broken in
commit 7d08d85645.
This patch fixes this, which in turn fixes the problem reported by
Khem Raj about the floor() function of libm.
Reported-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
CC: qemu-stable@nongnu.org (1.6)
Signed-off-by: Alexander Graf <agraf@suse.de>
Add MSR_LE to the msr_mask for POWER7.
Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
On POWER7, LPCR_ILE is used to control what endian guests take
their exceptions in so use it instead of MSR_ILE.
Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
# By Alex Bligh (32) and others
# Via Stefan Hajnoczi
* stefanha/block: (42 commits)
win32-aio: drop win32_aio_flush_cb()
aio-win32: replace incorrect AioHandler->opaque usage with ->e
aio / timers: remove dummy_io_handler_flush from tests/test-aio.c
aio / timers: Remove legacy interface
aio / timers: Switch entire codebase to the new timer API
aio / timers: Add scripts/switch-timer-api
aio / timers: Add test harness for AioContext timers
aio / timers: convert block_job_sleep_ns and co_sleep_ns to new API
aio / timers: Convert rtc_clock to be a QEMUClockType
aio / timers: Remove main_loop_timerlist
aio / timers: Rearrange timer.h & make legacy functions call non-legacy
aio / timers: Add qemu_clock_get_ms and qemu_clock_get_ms
aio / timers: Remove legacy qemu_clock_deadline & qemu_timerlist_deadline
aio / timers: Remove alarm timers
aio / timers: Add documentation and new format calls
aio / timers: Use all timerlists in icount warp calculations
aio / timers: Introduce new API timer_new and friends
aio / timers: On timer modification, qemu_notify or aio_notify
aio / timers: Convert mainloop to use timeout
aio / timers: Convert aio_poll to use AioContext timers' deadline
...
Message-id: 1377202298-22896-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
This is an autogenerated patch using scripts/switch-timer-api.
Switch the entire code base to using the new timer API.
Note this patch may introduce some line length issues.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Convert stderr messages calling error_get_pretty()
to error_report().
Timestamp is prepended by -msg timstamp option with it.
Per Markus's comment below, A conversion from fprintf() to
error_report() is always an improvement, regardless of
error_get_pretty().
http://marc.info/?l=qemu-devel&m=137513283408601&w=2
But, it is not reasonable to convert them at one time
because fprintf() is used everwhere in qemu.
So, it should be done step by step with avoiding regression.
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Let's avoid -cpu host barfing at this PVR.
Linux recognizes it as "POWER5+ (gs) v2.1".
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375321323-29954-5-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It is ISA 2.03. Modelled as 970FX minus AltiVec flag.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375321323-29954-4-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375321323-29954-3-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375321323-29954-2-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 03a15a5436 claimed to add a POWER7+
model but instead added a "POWER7P" model, with an unhelpful "POWER7P"
description on top. Fix this to "POWER7+" as we already have "POWER3+",
"POWER4+" and "POWER5+" and there being no reason to deviate with the
user-visible command line -cpu POWER7P from the marketing name POWER7+.
Further, don't needlessly deviate from the scheme of naming PVR constant,
QOM type and device description after the exact revision that is in fact
encoded in the PVR used.
That way, we can change the user-friendly alias -cpu POWER7+ to point to a
different revision if we so desire, while not polluting the type namespace.
This naming scheme is sensible and completely orthogonal to how PVRs may
or may not get matched to CPU types.
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375736387-8429-1-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds CPU PVR definition for POWER7+.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-id: 1375412374-24701-1-git-send-email-aik@ozlabs.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375106733-832-2-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
'dprintf' is the name of a POSIX standard function so we should not be
stealing it for our debug macro. Rename to 'DPRINTF' (in line with
a number of other source files.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Acked-by: Richard Henderson <rth@twiddle.net>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1375100199-13934-4-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
At present, the savevm / migration support for the pseries machine will not
work when KVM is enabled. That's because KVM manages the guest's hash page
table in the host kernel, so qemu has no visibility of it. This patch
fixes this by using new kernel interfaces to extract and reinsert the
guest's hash table during the migration process.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Message-id: 1374175984-8930-11-git-send-email-aliguori@us.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Model TCE tables as a device that's hooked up as a child object to
the owner. Besides the code cleanup, we get a few nice benefits:
1) free actually works now (it was dead code before)
2) the TCE information is visible in the device tree
3) we can expose table information as properties such that if we
change the window_size, we can use globals to keep migration
working.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-id: 1374175984-8930-6-git-send-email-aliguori@us.ibm.com
[dwg: pseries: savevm support for PAPR TCE tables]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[alexey: ppc kvm: fix to compile]
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The savevm code for the powerpc cpu emulation is currently based around
the old register_savevm() rather than register_vmstate() method. It's also
rather broken, missing some important state on some CPU models.
This patch completely rewrites the savevm for target-ppc, using the new
VMStateDescription approach. Exactly what needs to be saved in what
configurations has been more carefully examined, too. This introduces a
new version (5) of the cpu save format. The old load function is retained
to support version 4 images.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-id: 1374175984-8930-2-git-send-email-aliguori@us.ibm.com
[aik: ppc cpu savevm convertion fixed to use PowerPCCPU instead of CPUPPCState]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit c643bed99 moved qemu_init_vcpu() calls to common CPUState code.
This causes x86 cpu-add to fail with "KVM: setting VAPIC address failed".
The reason for the failure is that CPUClass::kvm_fd is not yet
initialized in the following call graph:
->x86_cpu_realizefn
->x86_cpu_apic_realize
->qdev_init
->device_set_realized
->device_reset (hotplugged == 1)
->apic_reset_common
->vapic_base_update
->kvm_apic_vapic_base_update
This causes attempted KVM vCPU ioctls to fail.
By contrast, in the non-hotplug case the APIC is reset much later, when
the vCPU is already initialized.
As a quick and safe solution, move the qemu_init_vcpu() call back into
the targets' realize functions.
Reported-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Acked-by: Igor Mammedov <imammedo@redhat.com> (for i386)
Tested-by: Jia Liu <proljc@gmail.com> (for openrisc)
Signed-off-by: Andreas Färber <afaerber@suse.de>
Replace the GDB_CORE_XML define in gdbstub.c with a CPUClass field.
Use first_cpu for qSupported and qXfer:features:read: for now.
Add a stub for xml_builtin.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Completes migration of target-specific code to new target-*/gdbstub.c.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Signed-off-by: Andreas Färber <afaerber@suse.de>
This avoids polluting the global namespace with a non-prefixed macro and
makes it obvious in the call sites that we return.
Semi-automatic conversion using, e.g.,
sed -i 's/GET_REGL(/return gdb_get_regl(mem_buf, /g' target-*/gdbstub.c
followed by manual tweaking for sparc's GET_REGA() and Coding Style.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Signed-off-by: Andreas Färber <afaerber@suse.de>
CPUState::gdb_num_regs replaces num_g_regs.
CPUClass::gdb_num_core_regs replaces NUM_CORE_REGS.
Allows building gdb_register_coprocessor() for xtensa, too.
As a side effect this should fix coprocessor register numbering for SMP.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Signed-off-by: Andreas Färber <afaerber@suse.de>
Change breakpoint_invalidate() argument to CPUState alongside.
Since all targets now assign a softmmu-only field, we can drop helpers
cpu_class_set_{do_unassigned_access,vmsd}() and device_class_set_vmsd().
Prepares for changing cpu_memory_rw_debug() argument to CPUState.
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Signed-off-by: Andreas Färber <afaerber@suse.de>
Prepares for changing cpu_single_step() argument to CPUState.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Signed-off-by: Andreas Färber <afaerber@suse.de>
Where no extra implementation is needed, fall back to CPUClass::set_pc().
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Signed-off-by: Andreas Färber <afaerber@suse.de>
This moves setting the Program Counter from gdbstub into target code.
Use vaddr type as upper-bound replacement for target_ulong.
Signed-off-by: Andreas Färber <afaerber@suse.de>
This patch adds CPU PVR definition for POWER8,
and enables QEMU to launch guests on POWER8 hardware.
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Andreas Farber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
MPC86xx processors are based on the e600 core, which is not the case
in qemu where it is based on the 7400 processor.
This patch creates the e600 core and instantiates the MPC86xx
processors based on it. Therefore, adding the high BATs, the SPRG
4..7 registers, which are e600-specific [1], and a HW MMU model (as 7400).
This allows to define the MPC8610 processor too.
Tested with a kernel using the HW TLB misses.
[1] http://cache.freescale.com/files/32bit/doc/ref_manual/E600CORERM.pdf
Signed-off-by: Julio Guerra <guerr@julio.in>
Signed-off-by: Alexander Graf <agraf@suse.de>
x86 was using additional CPU_DUMP_* flags, so make that configurable in
CPUClass::reset_dump_flags.
This adds reset logging for alpha, unicore32 and xtensa.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Choose CPUState rather than PowerPCCPU since doing a CPU() cast on the
macro argument would hide type mismatches.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Since commit 878096eeb2 (cpu: Turn
cpu_dump_{state,statistics}() into CPUState hooks) CPUArchState is no
longer needed.
Add documentation and make the functions available through qemu/log.h
outside NEED_CPU_H to allow use in qom/cpu.c. Moving them to qom/cpu.h
was not yet possible due to convoluted include paths, so that some
devices grow an implicit and unneeded dependency on qom/cpu.h for now.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Reviewed-by: Richard Henderson <rth@twiddle.net>
[AF: Simplified mb_cpu_do_interrupt() and do_interrupt_all() changes]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Also use bool type while at it.
Prepares for moving singlestep_enabled field to CPUState.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Commit b632a148b6 (target-ppc: QOM method
dispatch for MMU fault handling) introduced a use of ENV_GET_CPU()
inside target-ppc/ code. Use ppc_env_get_cpu() instead.
Purely cosmetic, non-functional change to aid in locating and removing
ENV_GET_CPU() usages.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move next_cpu from CPU_COMMON to CPUState.
Move first_cpu variable to qom/cpu.h.
gdbstub needs to use CPUState::env_ptr for now.
cpu_copy() no longer needs to save and restore cpu_next.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Rebased, simplified cpu_copy()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
A transition from CPUFooState to FooCPU can be considered safe,
just like FooCPU::env access in the opposite direction.
The only benefit of the FOO_CPU() casts would be protection against
bogus CPUFooState pointers, but then surrounding code would likely
break, too.
This should slightly improve interrupt etc. performance when going from
CPUFooState to FooCPU.
For any additional CPU() casts see 3556c233d9
(qom: allow turning cast debugging off).
Reported-by: Anthony Liguori <aliguori@us.ibm.com>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The functions cpu_clone_regs() and cpu_set_tls() are not purely CPU
related -- they are specific to the TLS ABI for a a particular OS.
Move them into the linux-user/ tree where they belong.
target-lm32 had entirely unused implementations, since it has no
linux-user target; just drop them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The L2CR register contains a number of bits that either impose configuration
which we can't deal with or mean "something is in progress until the bit is
0 again".
Since we don't model the former and we do want to accomodate guests using the
latter semantics, let's just ignore writes to L2CR. That way guests always read
back 0 and are usually happy with that.
Signed-off-by: Alexander Graf <agraf@suse.de>
When running QEMU with "-cpu ?" we walk through every alias for every
target CPU we know about. This takes several seconds on my very fast
host system.
Let's introduce a class object cache in the alias table. Using that we
don't have to go through the tedious work of finding our target class.
Instead, we can just go directly from the alias name to the target class
pointer.
This patch brings -cpu "?" to reasonable times again.
Before:
real 0m4.716s
After:
real 0m0.025s
Signed-off-by: Alexander Graf <agraf@suse.de>
Tom Musta
Alexey Kardashevskiy
Greg Kurz
Cédric Le Goater
Anton Blanchard
Peter Maydell
Alexander Graf
Andreas Färber
Edgar E. Iglesias
Aneesh Kumar K.V
David Gibson
Anthony Liguori
Ákos Kovács
Richard Henderson
James Hogan
Aurelien Jarno
Anthony Liguori
Alex Bligh
Seiji Aguchi
Anthony Liguori
Prerna Saxena
Julio Guerra
Paolo Bonzini