3eebd5eb03
gas/
...
* config/tc-mips.c (macro): Handle M_PREF_AB.
include/opcode/
* mips.h (M_PREF_AB): New enum value.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Add "pref" macro.
2011-02-28 16:06:51 +00:00
89c0d58cff
Swap ChangeLog entries.
2011-02-28 16:03:38 +00:00
26bb3ddd50
gas/opcodes: blackfin: move dsp mac func defines to common header
...
The mmod field is decoded in a few places (gas/opcodes/sim), so move it to
a common place to avoid duplication.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-02-12 19:36:31 +00:00
dd76fcb82e
opcodes: blackfin: add multiple inclusion protection
...
Prevent build errors if the header happens to be included multiple times.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-02-11 17:47:54 +00:00
98d23befa7
gas/
...
* doc/as.texinfo (Target TIC6X options): Don't mention "-matomic".
* doc/c-tic6x.texi (TIC6X Directives): Don't mention ".atomic".
(TIC6X Options): Don't mention "-matomic".
* config/tc-tic6x.c (OPTION_MATOMIC, OPTION_MNO_ATOMIC): Delete.
(md_longopts): Remove corresponding entries.
(md_parse_option): Don't handle them.
(md_show_usage): Don't document them.
(tic6x_atomic): Delete variable.
(tic6x_update_features): Always copy tic6x_arch_enable to
tic6x_features.
(tic6x_arch_enable): Remove references to TIC6X_INSN_ATOMIC.
(s_tic6x_atomic, s_tic6x_noatomic): Remove functions.
(md_pseudo_table): Remove ".atomic" and ".noatomic".
gas/testsuite/
* gas/tic6x/dir-junk.l: Remove tests for .atomic and .noatomic.
* gas/tic6x/dir-junk.s: Likewise.
* gas/tic6x/insns-c674x-bad.d: Remove test.
* gas/tic6x/insns-c674x-bad.l: Likewise.
* gas/tic6x/insns-atomic.d: Remove "-matomic" switch.
include/opcode/
* tic6x-opcode-table.h (cmtl, ll, sl): Available on C64XP.
* tic6x.h (TIC6X_INSN_ATOMIC): Remove.
2011-02-03 23:20:26 +00:00
3c853d9313
PR gas/11395
...
* config/tc-hppa.c (pa_ip): Revert last change. Add variable need_cond
to determine whether a 64-bit condition is needed for 'A' and 'S'
conditions. Default to 32-bit never condition for logical and unit
instructions. Add error message for missing branch on bit condition.
* hppa.h (pa_opcodes): Revert last change. Exchange 32 and 64-bit
"bb" entries.
* hppa-dis.c (compare_cond_64_names): Change never condition to ",*".
(add_cond_64_names): Likewise.
(logical_cond_64_names): Likewise.
(unit_cond_64_names): Likewise.
2010-12-31 16:43:46 +00:00
79676006fb
Move ChangeLog entry.
2010-12-29 16:57:42 +00:00
a64718d3b1
PR gas/11395
...
* config/tc-hppa.c (pa_ip): Set doubleword carry/borrow bit when a
doubleword completer or doubleword condition is found in an add/sub
instruction. Reject match for 'A'/'S' only if there is no condition
and d bit is not set.
* gas/hppa/basic/add2.s: Add test for a simple doubleword carry
instruction.
* gas/hppa/basic/sub2.s: Add tests for simple word and doubleword
borrow instructions.
* gas/hppa/basic/basic.exp: Update regexps for above.
* opcode/hppa.h: Clear "d" bit in "add" and "sub" patterns.
2010-12-27 02:05:14 +00:00
1bec78e97d
include/opcode/
...
* mips.h: Update commentary after last commit.
2010-12-18 11:28:25 +00:00
9867540240
include/opcode/
...
2010-12-14 Mingjie Xing <mingjie.xing@gmail.com>
* mips.h (OP_*_OFFSET_A, OP_*_OFFSET_B, OP_*_OFFSET_C)
(OP_*_RZ, OP_*_FZ, INSN2_M_FP_D, INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z)
(INSN2_READ_GPR_Z, INSN2_READ_FPR_Z, INSN2_READ_GPR_D): Define.
opcodes/
2010-12-14 Mingjie Xing <mingjie.xing@gmail.com>
* mips-opc.c (WR_z, WR_Z, RD_z, RD_Z, RD_d): Define.
(mips_builtin_opcodes): Add loongson3a specific instructions.
* mips-dis.c (print_insn_args): Handle the new arguments +a|b|c|z|Z.
gas/
2010-12-14 Mingjie Xing <mingjie.xing@gmail.com>
* config/tc-mips.c (insn_uses_reg): Handle the new flags
INSN2_READ_FPR_Z, INSN2_READ_GPR_D and INSN2_READ_GPR_Z.
(append_insn): Handle delay-slot filling for the new flags.
(validate_mips_insn): Handle the new arguments +a|b|c|z|Z.
(mips_ip): Handle the new arguments +a|b|c|z|Z.
gas/testsuite/
2010-12-14 Mingjie Xing <mingjie.xing@gmail.com>
* gas/mips/loongson-3a-2.s, gas/mips/loongson-3a-2.d,
gas/mips/loongson-3a-3.s, gas/mips/loongson-3a-3.d: New tests.
* gas/mips/mips.exp: Run them.
2010-12-18 11:14:14 +00:00
1e8766d7c9
2010-11-25 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
...
* config/tc-s390.c (current_cpu): Initialize with latest CPU.
(init_default_arch): Default to z/Architecture mode if CPU provides it.
Remove the check setting the CPU default.
2010-11-25 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* opcode/s390.h (enum s390_opcode_cpu_val): Add S390_OPCODE_MAXCPU.
2010-11-25 09:33:54 +00:00
435b94a4ae
include/opcode/
...
* mips.h: Fix previous commit.
2010-11-23 20:24:32 +00:00
d051516a87
* mips.h (INSN_CHIP_MASK): Update according to INSN_LOONGSON_3A.
...
(INSN_LOONGSON_3A): Clear bit 31.
* elfxx-mips.c (mips_set_isa_flags): Move bfd_mach_loongson_3a
after bfd_mach_mips_sb1.
* config/tc-mips.c (mips_cpu_info_table): Move loongson3a after sb1.
2010-11-23 17:04:13 +00:00
251665fc5f
PR gas/12198
...
* gas/config/tc-arm.c (arm_arch_v6m_only): New variable.
(aeabi_set_public_attributes): Ensure we only set the Operating System
Extension when we are on an M-profile core.
* gas/testsuite/gas/arm/pr12198-1.d: New test.
* gas/testsuite/gas/arm/pr12918-1.s: Likewise.
* gas/testsuite/gas/arm/pr12198-2.d: Likewise.
* gas/testsuite/gas/arm/pr12918-2.s: Likewise.
* include/opcode/arm.h (ARM_AEXT_V6M_ONLY): New define.
(ARM_AEXT_V6M): Rewrite in terms of ARM_AEXT_V6M_ONLY.
(ARM_ARCH_V6M_ONLY): New define.
2010-11-15 10:03:05 +00:00
fd50354116
bfd/
...
* archures.c (bfd_mach_mips_loongson_3a): Defined.
* bfd-in2.h (bfd_mach_mips_loongson_3a): Defined.
* cpu-mips.c (I_loongson_3a): New add.
(arch_info_struct): Add loongson_3a.
* elfxx-mips.c (_bfd_elf_mips_mach): Add loongson_3a.
(mips_set_isa_flags): Add loongson_3a.
(mips_mach_extensions): Add loongson_3a in MIPS64 extensions.
binutils/
* readelf.c (get_machine_flags): Add loongson-3a.
gas/
* config/tc-mips.c (mips_cpu_info_table): Add loongson3a in MIPS 64.
* doc/c-mips.texi (MIPS cpu): Add loongson3a.
include/
* elf/mips.h (E_MIPS_MACH_LS3A): Defined.
* opcode/mips.h (INSN_LOONGSON_3A): Defined.
(CPU_LOONGSON_3A): Defined.
(OPCODE_IS_MEMBER): Add LOONGSON_3A.
opcodes/
* mips-dis.c (mips_arch_choices): Add loongson3a.
* mips-opc.c (IL3A): Defined as INSN_LOONGSON_3A.
(mips_builtin_opcodes): Modify some instructions' membership from
IL2F to IL2F|IL3A, since these instructions are supported by Loongson_3A.
2010-11-11 10:23:39 +00:00
4469d2be4b
cgen/
...
* utils-cgen.scm (gen-attr-accessors): Rename bool attribute to bool_.
* cpu/mep.opc (mep_cgen_insn_supported): Ditto.
include/opcode/
* cgen.h (CGEN_ATTR, CGEN_ATTR_TYPE): Rename bool attribute to bool_.
(CGEN_ATTR_BOOLS, CGEN_ATTR_CGEN_INSN_ALIAS_VALUE): Likewise.
opcodes/
* fr30-desc.h: Regenerate.
* frv-desc.h: Regenerate.
* ip2k-desc.h: Regenerate.
* iq2000-desc.h: Regenerate.
* lm32-desc.h: Regenerate.
* m32c-desc.h: Regenerate.
* m32r-desc.h: Regenerate.
* mep-desc.h: Regenerate.
* mep-opc.c: Regenerate.
* mt-desc.h: Regenerate.
* openrisc-desc.h: Regenerate.
* xc16x-desc.h: Regenerate.
* xstormy16-desc.h: Regenerate.
2010-10-09 06:50:23 +00:00
bb73df25a8
include/
...
* opcode/tic6x-control-registers.h (tscl): Now read_write.
gas/testsuite/
* gas/tic6x/insns-bad-1.s: Remove test for readonly tscl.
* gas/tic6x/insns-bad-1.l: Likewise.
* gas/tic6x/insns-c674x.d: Add test for writeable tscl.
* gas/tic6x/insns-c674x.s: Likewise.
2010-09-29 10:14:02 +00:00
d9aee5d7f7
2010-09-27 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
...
* s390-mkopc.c (enum s390_opcde_cpu_val): Add S390_OPCODE_Z196.
(main): Recognize the new CPU string.
* s390-opc.c: Add new instruction formats and masks.
* s390-opc.txt: Add new z196 instructions.
2010-09-27 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* opcode/s390.h: Add S390_OPCODE_Z196 to enum s390_opcode_cpu_val.
2010-09-27 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* config/tc-s390.c: (md_parse_option): New option -march=z196.
* doc/c-s390.texi: Document new option.
2010-09-27 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* gas/s390/s390.exp: Run the zarch-z196 test.
* gas/s390/zarch-z196.d: Add new instructions.
* gas/s390/zarch-z196.s: Likewise.
* gas/s390/zarch-z9-109.d: Likewise.
* gas/s390/zarch-z9-109.s: Likewise.
2010-09-27 13:36:48 +00:00
90ec0d684e
* bfd/bfd-in2.h (BFD_RELOC_ARM_HVC): New enum value.
...
* gas/config/tc-arm.c (arm_ext_virt): New variable.
(arm_reg_type): Add REG_TYPE_RNB for banked registers.
(reg_entry): Allow registers to be larger than a byte.
(reg_alias): Fix type warning.
(parse_operands): Parse banked registers when appropriate.
(do_mrs): Add support for Virtualization Extensions.
(do_hvc): New function.
(do_t_mrs): Add support for Virtualization Extensions.
(do_t_msr): Likewise.
(do_t_hvc): New function.
(SPLRBANK): New define.
(reg_names): Add banked registers.
(insns): Add support for Virtualization Extensions.
(md_apply_fixup): Likewise.
(arm_cpus): -mcpu=cortex-a15 implies the Virtualization Extensions.
(arm_extensions): Add 'virt' extension.
(aeabi_set_public_attributes): Add support for Virtualization
Extensions.
* gas/doc/c-arm.texi: Document 'virt' extension.
* gas/testsuite/gas/arm/armv7-a+virt.d: New test.
* gas/testsuite/gas/arm/armv7-a+virt.s: Likewise.
* gas/testsuite/gas/arm/attr-march-all.d: Update for Virtualization Extensions.
* gas/testsuite/gas/arm/attr-march-armv7-a+sec+virt.d: New test.
* gas/testsuite/gas/arm/attr-march-armv7-a+virt.d: Likewise.
* include/opcode/arm.h (ARM_EXT_VIRT): New define.
(ARM_ARCH_V7A_IDIV_MP_SEC): Rename...
(ARM_ARCH_V7A_IDIV_MP_SEC_VIRT): ...to this and include Virtualization
Extensions.
* opcodes/arm-dis.c (arm_opcodes): Add Virtualiztion Extensions support.
(thumb32_opcodes): Likewise.
(banked_regname): New function.
(print_insn_arm): Add Virtualization Extensions support.
(print_insn_thumb32): Likewise.
2010-09-23 15:52:19 +00:00
eea54501f7
* gas/config/tc-arm.c (arm_ext_adiv): New variable.
...
(do_div): New function.
(insns): Accept UDIV and SDIV in ARM state.
(arm_cpus): The cortex-a15 option has all current v7-A extensions.
(arm_extensions): Add 'idiv' extension.
(aeabi_set_public_attributes): Update Tag_DIV_use values for the
Integer Divide extension.
* gas/doc/c-arm.texi: Document the idiv extension.
* gas/testsuite/gas/arm/armv7-a+idiv.d: New test.
* gas/testsuite/gas/arm/armv7-a+idiv.s: Likewise.
* gas/testsuite/gas/arm/attr-march-all.d: Update for Integer divide extension.
* gas/testsuite/gas/arm/attr-march-armv7-a+idiv.d: New test.
* include/opcode/arm.h (ARM_AEXT_ADIV): New define.
(ARM_ARCH_V7A_IDIV_MP_SEC): Likewise.
* opcodes/arm-dis.c (arm_opcodes): Support disassembly of UDIV and SDIV in
ARM state.
2010-09-23 15:37:45 +00:00
b2a5fbdc94
* config/tc-arm.c (arm_ext_v6m): New variable.
...
(arm_ext_m): Add support for OS extension.
(arm_ext_os): New variable.
(do_t_swi): In v6-M ensure we have the OS extension.
(arm_cpus): The cortex-m1 and cortex-m0 options have the OS
extension by default.
(arm_archs): Add armv6s-m.
(arm_extensions): Add 'os' extension.
(cpu_arch_ver): Add support for v6S-M.
* gas/doc/c-arm.texi: Document the OS Extension, and v6-m and v6s-m
architecture options.
* gas/testsuite/gas/arm/archv6s-m-bad.d: New test.
* gas/testsuite/gas/arm/archv6s-m-bad.l: Likewise.
* gas/testsuite/gas/arm/archv6s-m.d: Likewise.
* gas/testsuite/gas/arm/archv6s-m.s: Likewise.
* gas/testsuite/gas/arm/attr-march-armv6-m+os.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv6s-m.d: Likewise.
* include/opcode/arm.h (ARM_EXT_OS): New define.
(ARM_AEXT_V6SM): Likewise.
(ARM_ARCH_V6SM): Likewise.
2010-09-23 15:31:34 +00:00
f4c65163c7
* gas/config/tc-arm.c (arm_ext_v6z): Remove.
...
(arm_ext_sec): New variable.
(do_t_smc): In Thumb state SMC requires v7-A.
(insns): Make SMC depend on Security Extensions.
(arm_cpus): All -mcpu=cortex-a* options have the Security Extensions.
(arm_extensions): Add 'sec' extension.
(cpu_arch_ver): Reorder.
(aeabi_set_public_attributes): Emit Tag_Virtualization_use as
appropriate.
* gas/doc/c-arm.texi: Document Security Extensions.
* gas/testsuite/gas/arm/attr-march-all.d: Update for Security Extensions..
* gas/testsuite/gas/arm/attr-march-armv6k+sec.d: New test.
* gas/testsuite/gas/arm/attr-march-armv6z.d: Update for Security Extensions.
* gas/testsuite/gas/arm/attr-march-armv6zk.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv6zkt2.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv6zt2.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv7-a+sec.d: New test.
* gas/testsuite/gas/arm/attr-mcpu.d: Update for Security Extensions.
* gas/testsuite/gas/arm/thumb32.d: Likewise.
* gas/testsuite/gas/arm/thumb32.s: Likewise.
* include/opcode/arm.h (ARM_EXT_V6Z): Remove.
(ARM_EXT_SEC): New define.
(ARM_AEXT_V6Z): Use Security Extensions.
(ARM_AEXT_V6ZK): Likeiwse.
(ARM_AEXT_V6ZT2): Likewise.
(ARM_AEXT_V6ZKT2): Likewise.
(ARM_AEXT_V7_ARM): Base v7 does not have Security Extensions.
(ARM_ARCH_V7A_SEC): New define.
(ARM_ARCH_V7A_MP): Rename...
(ARM_ARCH_V7A_MP_SEC): ...to this and add Security Extensions.
* ld/testsuite/ld-arm/attr-merge-6.attr: Update for Security Extensions.
* ld/testsuite/ld-arm/attr-merge-7.attr: Likewise.
* opcodes/arm-dis.c (arm_opcodes): SMC implies Security Extensions.
(thumb32_opcodes): Likewise.
2010-09-23 15:26:24 +00:00
60e5ef9f19
* gas/config/tc-arm.c (arm_ext_mp): Add.
...
(do_pld): Update comment.
(insns): Add support for pldw.
(arm_cpus): Update cortex-a5, cortex-a9, and cortex-a15 to support
MP extension.
(arm_extensions): Add 'mp' extension.
(aeabi_set_public_attributes): Emit correct build attribute when
MP extension is enabled.
* gas/doc/c-arm.texi: Update for MP extensions.
* gas/testsuite/gas/arm/arch7a-mp.d: Add.
* gas/testsuite/gas/arm/arch7ar-mp.s: Likewise.
* gas/testsuite/gas/arm/arch7r-mp.d: Likewise.
* gas/testsuite/gas/arm/armv2-mp-bad.d: Likewise.
* gas/testsuite/gas/arm/armv2-mp-bad.l: Likewise.
* gas/testsuite/gas/arm/attr-march-all.d: Update for MP extension.
* gas/testsuite/gas/arm/attr-march-armv7-a+mp.d: Add.
* gas/testsuite/gas/arm/attr-march-armv7-r+mp.d: Likewise.
* include/opcode/arm.h (ARM_EXT_MP): Add.
(ARM_ARCH_V7A_MP): Likewise.
* opcodes/arm-dis.c (arm_opcodes): Add support for pldw.
(thumb32_opcodes): Likewise.
2010-09-23 15:18:19 +00:00
73a63ccf2f
opcodes/gas: blackfin: support OUTC debug insn
...
The disassembler has partial (but incomplete/broken) support already for
the pseudo debug insn OUTC, so let's fix it up and finish it. And now
that the disassembler can handle it, make sure our assembler can output
it too.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-09-22 20:59:00 +00:00
ee99860ac0
opcodes: blackfin: strip trailing whitespace
2010-09-21 06:04:21 +00:00
f9c7014e9c
[include/opcode]
...
* rx.h (RX_Operand_Type): Add TwoReg.
(RX_Opcode_ID): Remove ediv and ediv2.
[opcodes]
* rx-decode.opc (SRR): New.
(rx_decode_opcode): Use it for movbi and movbir. Decode NOP2 (mov
r0,r0) and NOP3 (max r0,r0) special cases.
* rx-decode.c: Regenerate.
[sim/rx]
* rx.c (decode_cache_base): New.
(id_names): Remove ediv and edivu.
(optype_names): Add TwoReg.
(maybe_get_mem_page): New.
(rx_get_byte): Call it.
(get_op): Add TwoReg support.
(put_op): Likewise.
(PD, PS, PS2, GD, GS, GS2, DSZ, SSZ, S2SZ, US1, US2, OM): "opcode"
is a pointer now.
(DO_RETURN): New. We use longjmp to return an exception result.
(decode_opcode): Make opcode a pointer to the decode cache. Save
decoded opcode information and re-use. Call DO_RETURN instead of
return throughout. Remove ediv and edivu.
* mem.c (ptdc): New. Adds decode cache.
(rx_mem_ptr): Support it.
(rx_mem_decode_cache): New.
* mem.h (enum mem_ptr_action): add MPA_DECODE_CACHE.
(rx_mem_decode_cache): Declare.
* gdb-if.c (sim_resume): Add decode_opcode's setjmp logic here...
* main.c (main): ...and here. Use a fast loop if neither trace
nor disassemble is given.
* cpu.h (RX_MAKE_STEPPED, RX_MAKE_HIT_BREAK, RX_MAKE_EXITED,
RX_MAKE_STOPPED, RX_EXITED, RX_STOPPED): Adjust so that 0 is not a
valid code for anything.
2010-07-29 18:41:28 +00:00
933786524e
[sim/rx]
...
* README.txt: New.
* config.h (CYCLE_ACCURATE, CYCLE_STATS): New.
* configure.in (--enable-cycle-accurate, --enable-cycle-stats):
New. Default to enabled.
* configure: Regenerate.
* cpu.h (regs_type): Add cycle tracking info.
(reset_pipeline_stats): Declare.
(halt_pipeline_stats): Declare.
(pipeline_stats): Declare.
* main.c (done): Call pipeline_stats().
* mem.h (rx_mem_ptr): Moved to here ...
* mem.c (mem_ptr): ... from here. Rename throughout.
(mem_put_byte): Move LEDs to Port A. Add Port B to control cycle
statistics. Move UART to SCI4.
(mem_put_hi): Add TPU 1-2. TPU 1 and 2 count CPU cycles.
* reg.c (init_regs): Set Rt reg to -1 (no reg).
* rx.c: Add cycle counting and statistics throughout.
(rx_get_byte): Optimize for speed.
(decode_opcode): Likewise.
(reset_pipeline_stats): New.
(halt_pipeline_stats): New.
(pipeline_stats): New.
* trace.c (sim_disasm_one): Print cycle count.
[include/opcode]
* rx.h (RX_Opcode_ID): Add nop2 and nop3 for statistics.
2010-07-28 21:58:22 +00:00
1cd986c585
Add support for v850E2 and v850E2V3
2010-07-23 14:52:54 +00:00
9a2c708887
gas/
...
* config/tc-mips.c (nops_for_insn_or_target): Replace
MIPS16_INSN_BRANCH with MIPS16_INSN_UNCOND_BRANCH and
MIPS16_INSN_COND_BRANCH.
include/opcode/
* mips.h (MIPS16_INSN_UNCOND_BRANCH): New macro.
(MIPS16_INSN_BRANCH): Rename to...
(MIPS16_INSN_COND_BRANCH): ... this.
opcodes/
* mips-dis.c (print_mips16_insn_arg): Remove branch instruction
type and delay slot determination.
(print_insn_mips16): Extend branch instruction type and delay
slot determination to cover all instructions.
* mips16-opc.c (BR): Remove macro.
(UBR, CBR): New macros.
(mips16_opcodes): Update branch annotation for "b", "beqz",
"bnez", "bteqz" and "btnez". Add branch annotation for "jalrc"
and "jrc".
2010-07-06 00:02:46 +00:00
bdc70b4a03
include/opcode/
...
* ppc.h (PPC_OPCODE_32, PPC_OPCODE_BOOKE64, PPC_OPCODE_CLASSIC): Delete.
Renumber other PPC_OPCODE defines.
gas/
* config/tc-ppc.c (ppc_set_cpu): Remove old opcode flags.
(ppc_setup_opcodes): Likewise. Simplify opcode selection.
opcodes/
* ppc-dis.c (ppc_opts, powerpc_init_dialect): Remove old opcode flags.
* ppc-opc.c (PPC32, POWER32, COM32, CLASSIC): Delete.
(PPC64, MFDEC2): Update.
(NON32, NO371): Define.
(powerpc_opcode): Update to not use old opcode flags, and avoid
-m601 duplicates.
2010-07-03 06:51:56 +00:00
f2bae120dc
* ppc.h (PPC_OPCODE_COMMON): Expand comment.
2010-07-03 03:32:50 +00:00
360cfc9c8b
remove maxq-coff port
2010-06-29 04:17:34 +00:00
e01d869a3b
gas/
...
* config/tc-ppc.c (md_assemble): Emit APUinfo section for
PPC_OPCODE_E500.
gas/testsuite/
* gas/ppc/e500.s: Add eieio, mbar and lwsync
* gas/ppc/e500.d: Likewise.
include/opcode/
* ppc.h (PPC_OPCODE_E500): Define.
opcodes/
* ppc-dis.c (ppc_opts): Remove PPC_OPCODE_E500MC from e500 and
e500x2. Add PPC_OPCODE_E500 to e500 and e500x2
* ppc-opc.c (powerpc_opcodes): Deprecate all opcodes on EFS which
touch floating point regs and are enabled by COM, PPC or PPCCOM.
Treat sync as msync on e500. Treat eieio as mbar 1 on e500.
Treat lwsync as msync on e500.
2010-06-14 14:48:05 +00:00
f79e2745b2
gas/
...
* config/tc-mips.c (is_opcode_valid): Remove expansionp.
(macro_build): Change invocation of is_opcode_valid.
(mips_ip): Likewise.
gas/testsuite/
* gas/mips/mips-no-jalx.l: Delete.
* gas/mips/mips-no-jalx.s: Delete.
* gas/mips/mips-jalx-2.d: New.
* gas/mips/mips-jalx-2.s: New.
* gas/mips/mips.exp (mips-jalx-2): Run new test.
(mips-no-jalx): Remove deleted test.
include/
* opcode/mips.h (INSN_MIPS16): Remove.
opcodes/
* mips-dis.c (mips_arch): Remove INSN_MIPS16.
* mips-opc.c (I16): Remove.
(mips_builtin_op): Reclassify jalx.
2010-05-26 12:59:56 +00:00
2462afa169
gas/testsuite:
...
* gas/tic6x/insns-c674x.s, gas/tic6x/insns-c674x.d: Also test
"b .S2 b3".
include/opcode:
* tic6x-insn-formats.h (s_branch): Correct typo in bitmask.
2010-04-21 18:56:45 +00:00
e4e42b45d5
Upgrade header files to use GPLv3
2010-04-15 10:26:09 +00:00
40b365969f
bfd:
...
* Makefile.am (ALL_MACHINES): Add cpu-tic6x.lo.
(ALL_MACHINES_CFILES): Add cpu-tic6x.c.
(BFD32_BACKENDS): Add elf32-tic6x.lo.
(BFD32_BACKENDS_CFILES): Add elf32-tic6x.c.
* Makefile.in: Regenerate.
* archures.c (bfd_arch_tic6x, bfd_tic6x_arch): New.
(bfd_archures_list): Update.
* config.bfd (tic6x-*-elf): New.
* configure.in (bfd_elf32_tic6x_be_vec, bfd_elf32_tic6x_le_vec):
New.
* configure: Regenerate.
* cpu-tic6x.c, elf32-tic6x.c: New.
* reloc.c (BFD_RELOC_C6000_PCR_S21, BFD_RELOC_C6000_PCR_S12,
BFD_RELOC_C6000_PCR_S10, BFD_RELOC_C6000_PCR_S7,
BFD_RELOC_C6000_ABS_S16, BFD_RELOC_C6000_ABS_L16,
BFD_RELOC_C6000_ABS_H16, BFD_RELOC_C6000_SBR_U15_B,
BFD_RELOC_C6000_SBR_U15_H, BFD_RELOC_C6000_SBR_U15_W,
BFD_RELOC_C6000_SBR_S16, BFD_RELOC_C6000_SBR_L16_B,
BFD_RELOC_C6000_SBR_L16_H, BFD_RELOC_C6000_SBR_L16_W,
BFD_RELOC_C6000_SBR_H16_B, BFD_RELOC_C6000_SBR_H16_H,
BFD_RELOC_C6000_SBR_H16_W, BFD_RELOC_C6000_SBR_GOT_U15_W,
BFD_RELOC_C6000_SBR_GOT_L16_W, BFD_RELOC_C6000_SBR_GOT_H16_W,
BFD_RELOC_C6000_DSBT_INDEX, BFD_RELOC_C6000_PREL31,
BFD_RELOC_C6000_COPY, BFD_RELOC_C6000_ALIGN,
BFD_RELOC_C6000_FPHEAD, BFD_RELOC_C6000_NOCMP): New.
* targets.c (bfd_elf32_tic6x_be_vec, bfd_elf32_tic6x_le_vec): New.
(_bfd_target_vector): Update.
* bfd-in2.h, libbfd.h: Regenerate.
binutils:
* MAINTAINERS: Add self as TI C6X maintainer.
* NEWS: Add news entry for TI C6X support.
* readelf.c: Include elf/tic6x.h.
(guess_is_rela): Handle EM_TI_C6000.
(dump_relocations): Likewise.
(get_tic6x_dynamic_type): New.
(get_dynamic_type): Call it.
(get_machine_flags): Handle EF_C6000_REL.
(get_osabi_name): Handle machine-specific values only for relevant
machines. Handle C6X values.
(get_tic6x_segment_type): New.
(get_segment_type): Call it.
(get_tic6x_section_type_name): New.
(get_section_type_name): Call it.
(is_32bit_abs_reloc, is_16bit_abs_reloc, is_none_reloc): Handle
EM_TI_C6000.
gas:
* Makefile.am (TARGET_CPU_CFILES): Add config/tc-tic6x.c.
(TARGET_CPU_HFILES): Add config/tc-tic6x.h.
* Makefile.in: Regenerate.
* NEWS: Add news entry for TI C6X support.
* app.c (do_scrub_chars): Handle "||^" for TI C6X. Handle
TC_PREDICATE_START_CHAR and TC_PREDICATE_END_CHAR. Keep spaces in
operands if TC_KEEP_OPERAND_SPACES.
* configure.tgt (tic6x-*-*): New.
* config/tc-ia64.h (TC_PREDICATE_START_CHAR,
TC_PREDICATE_END_CHAR): Define.
* config/tc-tic6x.c, config/tc-tic6x.h: New.
* doc/Makefile.am (CPU_DOCS): Add c-tic6x.texi.
* doc/Makefile.in: Regenerate.
* doc/all.texi (TIC6X): Define.
* doc/as.texinfo: Add TI C6X documentation. Include c-tic6x.texi.
* doc/c-tic6x.texi: New.
gas/testsuite:
* gas/tic6x: New directory and testcases.
include:
* dis-asm.h (print_insn_tic6x): Declare.
include/elf:
* common.h (ELFOSABI_C6000_ELFABI, ELFOSABI_C6000_LINUX): Define.
* tic6x.h: New.
include/opcode:
* tic6x-control-registers.h, tic6x-insn-formats.h,
tic6x-opcode-table.h, tic6x.h: New.
ld:
* Makefile.am (ALL_EMULATIONS): Add eelf32_tic6x_be.o and
eelf32_tic6x_le.o.
(eelf32_tic6x_be.c, eelf32_tic6x_le.c): New.
* NEWS: Add news entry for TI C6X support.
* configure.tgt (tic6x-*-*): New.
* emulparams/elf32_tic6x_be.sh, emulparams/elf32_tic6x_le.sh: New.
ld/testsuite:
* ld-elf/flags1.d, ld-elf/merge.d: XFAIL for tic6x-*-*.
* ld-elf/sec-to-seg.exp: Set B_test_same_seg to 0 for tic6x-*-*.
* ld-tic6x: New directory and testcases.
opcodes:
* Makefile.am (TARGET_LIBOPCODES_CFILES): Add tic6x-dis.c.
* Makefile.in: Regenerate.
* configure.in (bfd_tic6x_arch): New.
* configure: Regenerate.
* disassemble.c (ARCH_tic6x): Define if ARCH_all.
(disassembler): Handle TI C6X.
* tic6x-dis.c: New.
2010-03-25 21:12:36 +00:00
c67a084a24
* config/tc-mips.c (mips_fix_loongson2f, mips_fix_loongson2f_nop,
...
mips_fix_loongson2f_jump): New variables.
(md_longopts): Add New options -mfix-loongson2f-nop/jump,
-mno-fix-loongson2f-nop/jump.
(md_parse_option): Initialize variables via above options.
(options): New enums for the above options.
(md_begin): Initialize nop_insn from LOONGSON2F_NOP_INSN.
(fix_loongson2f, fix_loongson2f_nop, fix_loongson2f_jump):
New functions.
(append_insn): call fix_loongson2f().
(mips_handle_align): Replace the implicit nops.
* config/tc-mips.h (MAX_MEM_FOR_RS_ALIGN_CODE): Modified
for the new mips_handle_align().
* doc/c-mips.texi: Document the new options.
* gas/mips/loongson-2f-2.s: New test of -mfix-loongson2f-nop.
* gas/mips/loongson-2f-2.d: Likewise.
* gas/mips/loongson-2f-3.s: New test of -mfix-loongson2f-jump.
* gas/mips/loongson-2f-3.d: Likewise.
* gas/mips/mips.exp: Run the new tests.
* opcode/mips.h (LOONGSON2F_NOP_INSN): New macro.
2010-02-25 11:15:48 +00:00
466ef64fe3
missed from last commit
2010-02-08 02:04:05 +00:00
ce3d2015b2
include/
...
* opcode/ppc.h (PPC_OPCODE_TITAN): Define.
bfd/
* archures.c (bfd_mach_ppc_titan): Define.
* bfd-in2.h: Regenerate.
* cpu-powerpc.c (bfd_powerpc_archs): Add titan entry.
opcodes/
* ppc-dis.c (ppc_opts): Add titan entry.
* ppc-opc.c (TITAN, MULHW): Define.
(powerpc_opcodes): Support AppliedMicro Titan core (APM83xxx).
gas/
* config/tc-ppc.c (md_show_usage): Mention -mtitan. Don't use tabs.
(ppc_mach): Handle titan.
* doc/c-ppc.texi: Mention -mtitan.
gas/testsuite/
* gas/ppc/titan.d, * gas/ppc/titan.s: New test.
* gas/ppc/ppc.exp: Run it.
2010-02-08 01:59:38 +00:00
1319d143a7
Remove argument name.
...
2010-01-14 H.J. Lu <hongjiu.lu@intel.com>
* ia64.h (ia64_find_opcode): Remove argument name.
(ia64_find_next_opcode): Likewise.
(ia64_dis_opcode): Likewise.
(ia64_free_opcode): Likewise.
(ia64_find_dependency): Likewise.
2010-01-14 15:18:42 +00:00
1fbb9298a4
* cgen.h: Include bfd_stdint.h.
...
(CGEN_INSN_LGSINT, CGEN_INSN_LGUINT): New types.
2009-11-23 03:56:29 +00:00
ada65aa377
2009-11-18 Paul Brook <paul@codesourcery.com>
...
gas/
* config/tc-arm.c (arm_fpus): Add fpv4-sp-d16.
(aeabi_set_public_attributes): Correctly mark VFPv3xD.
include/opcode/
* arm.h (FPU_VFP_V4_SP_D16, FPU_ARCH_VFP_V4_SP_D16): Define.
2009-11-18 15:48:59 +00:00
9e3c6df664
2009-11-17 Paul Brook <paul@codesourcery.com>
...
Daniel Jacobowitz <dan@codesourcery.com>
gas/
* doc/c-arm.texi: Document .arch armv7e-m.
* config/tc-arm.c (arm_ext_v6_dsp, arm_ext_v7m): New.
(insns): Put Thumb versions of v5TExP instructions into
arm_ext_v5exp also. Move some Thumb variants from
arm_ext_v6_notm to arm_ext_v6_dsp.
(arm_archs): Add armv7e-m architecture.
(aeabi_set_public_attributes): Handle -march=armv7e-m.
gas/testsuite/
* gas/arm/attr-march-armv7em.d: New test.
* gas/arm/arch7em-bad.d: New test.
* gas/arm/arch7em-bad.l: New test.
* gas/arm/arch7em.d: New test.
* gas/arm/arch7em.s: New test.
include/elf/
* arm.h (TAG_CPU_ARCH_V7E_M): Define.
include/opcode/
* arm.h (ARM_EXT_V6_DSP): Define.
(ARM_AEXT_V6T2, ARM_AEXT_NOTM): Include ARM_EXT_V6_DSP.
(ARM_AEXT_V7EM, ARM_ARCH_V7EM): Define.
binutils/
* readelf.c (arm_attr_tag_CPU_arch): Add v7E-M.
bfd/
* elf32-arm.c (using_thumb_only, arch_has_arm_nop,
arch_has_thumb2_nop): Handle TAG_CPU_ARCH_V7E_M.
(tag_cpu_arch_combine): Ditto. Correct MAX_TAG_CPU_ARCH test.
2009-11-17 16:31:56 +00:00
0d734b5d06
[opcodes]
...
* rx-decode.opc (rx_decode_opcode) (mvtipl): Add.
(mvtcp, mvfcp, opecp): Remove.
* rx-decode.c: Regenerate.
* rx-dis.c (cpen): Remove.
[gas]
* config/rx-parse.y (MVTIPL): Update bit pattern.
(cpen): Remove.
[include/opcode]
* rx.h (rx_decode_opcode) (mvtipl): Add.
(mvtcp, mvfcp, opecp): Remove.
2009-11-05 00:38:45 +00:00
62f3b8c867
2009-11-02 Paul Brook <paul@codesourcery.com>
...
ld/testsuite/
* ld-arm/arm-elf.exp: Add new attr-merge-vfp tests.
* ld-arm/attr-merge-vfp-1.d: New test.
* ld-arm/attr-merge-vfp-1r.d: New test.
* ld-arm/attr-merge-vfp-2.d: New test.
* ld-arm/attr-merge-vfp-2r.d: New test.
* ld-arm/attr-merge-vfp-3.d: New test.
* ld-arm/attr-merge-vfp-3r.d: New test.
* ld-arm/attr-merge-vfp-4.d: New test.
* ld-arm/attr-merge-vfp-4r.d: New test.
* ld-arm/attr-merge-vfp-5.d: New test.
* ld-arm/attr-merge-vfp-5r.d: New test.
* ld-arm/attr-merge-vfp-2.s: New test.
* ld-arm/attr-merge-vfp-3.s: New test.
* ld-arm/attr-merge-vfp-3-d16.s: New test.
* ld-arm/attr-merge-vfp-4.s: New test.
* ld-arm/attr-merge-vfp-4-d16.s: New test.
gas/
* doc/c-arm.texi: Document new -mfpu options.
* config/tc-arm.c (fpu_vfp_ext_v3xd, fpu_vfp_fp16, fpu_neon_ext_fma,
fpu_vfp_ext_fma): New.
(NEON_ENC_TAB): Add vfma, vfms, vfnma and vfnms.
(do_vfp_nsyn_fma_fms, do_neon_fmac): New functions.
(insns): Move double precision load/store. Split out double
precision VFPv3 instrucitons. Add VFPv4 instructions.
(arm_fpus): Add VFPv3-FP16, VFPv3xD and VFPv4 variants.
(aeabi_set_public_attributes): Set VFPv4 variants
gas/testsuite/
* gas/arm/attr-mfpu-vfpv4.d: New test.
* gas/arm/attr-mfpu-vfpv4-d16.d: New test.
* gas/arm/neon-fma-cov.d: New test.
* gas/arm/neon-fma-cov.s: New test.
* gas/arm/vfp-fma-inc.s: New test.
* gas/arm/vfp-fma-arm.d: New test.
* gas/arm/vfp-fma-arm.s: New test.
* gas/arm/vfp-fma-thumb.d: New test.
* gas/arm/vfp-fma-thumb.s: New test.
* gas/arm/vfma1.d: New test.
* gas/arm/vfma1.s: New test.
* gas/arm/vfpv3xd.d: New test.
* gas/arm/vfpv3xd.s: New test.
include/opcode/
* arm.h (FPU_VFP_EXT_V3xD, FPU_VFP_EXT_FP16, FPU_NEON_EXT_FMA,
FPU_VFP_EXT_FMA, FPU_VFP_V3xD, FPU_VFP_V4D16, FPU_VFP_V4): Define.
(FPU_ARCH_VFP_V3D16_FP16, FPU_ARCH_VFP_V3_FP16, FPU_ARCH_VFP_V3xD,
FPU_ARCH_VFP_V3xD_FP16, FPU_ARCH_VFP_V4, FPU_ARCH_VFP_V4D16,
FPU_ARCH_NEON_VFP_V4): Define.
binutils/
* readelf.c (arm_attr_tag_VFP_arch): Add VFPv4 and VFPv4-D16.
bfd/
* elf32-arm.c (elf32_arm_merge_eabi_attributes): Handle VFPv4
attributes.
opcodes/
* arm-dis.c (coprocessor_opcodes): Update to use new feature flags.
Add VFPv4 instructions.
2009-11-02 13:44:05 +00:00
ac1e9eca70
cpu/
...
* m32c.opc (opc.h): cgen-types.h -> cgen/basic-modes.h.
cgen-ops.h -> cgen/basic-ops.h.
include/opcode/
* cgen-bitset.h: Delete, moved to ../cgen/bitset.h.
* cgen.h: Update. Improve multi-inclusion macro name.
include/cgen/
* basic-modes.h: New file. Moved here from opcodes/cgen-types.h.
* basic-ops.h: New file. Moved here from opcodes/cgen-ops.h.
* bitset.h: New file. Moved here from ../opcode/cgen-bitset.h.
Update license to GPL v3.
opcodes/
* cgen-ops.h: Delete, moved to ../include/cgen/basic-ops.h.
* cgen-types.h: Delete, moved to ../include/cgen/basic-modes.h.
* cgen-bitset.c: Update.
* fr30-desc.h: Regenerate.
* frv-desc.h: Regenerate.
* ip2k-desc.h: Regenerate.
* iq2000-desc.h: Regenerate.
* lm32-desc.h: Regenerate.
* m32c-desc.h: Regenerate.
* m32c-opc.h: Regenerate.
* m32r-desc.h: Regenerate.
* mep-desc.h: Regenerate.
* mt-desc.h: Regenerate.
* openrisc-desc.h: Regenerate.
* xc16x-desc.h: Regenerate.
* xstormy16-desc.h: Regenerate.
2009-10-24 00:17:08 +00:00
9fe54b1ca1
gas/
...
* config/tc-ppc.c (md_show_usage): Document -m476.
* doc/c-ppc.texi (PowerPC-Opts): Document -m476.
gas/testsuite/
* gas/ppc/476.s: New test.
* gas/ppc/476.d: Likewise.
* gas/ppc/ppc.exp: Run the 476 test.
include/opcode/
* ppc.h (PPC_OPCODE_476): Define.
opcodes/
* ppc-dis.c (ppc_opts): Add "476" entry.
* ppc-opc.c (PPC476): Define.
(powerpc_opcodes): Update mnemonics where required for 476.
2009-10-02 14:42:42 +00:00
634b50f2a6
gas/
...
* config/tc-ppc.c (md_show_usage): Rename "ppca2" to "a2".
* doc/c-ppc.texi (PowerPC-Opts): Likewise.
gas/testsuite/
* gas/ppc/a2.d: Rename "ppca2" to "a2".
include/opcode/
* ppc.h (PPC_OPCODE_A2): Rename from PPC_OPCODE_PPCA2.
opcodes/
* ppc-opc.c (PPCA2): Use renamed mask PPC_OPCODE_A2.
* ppc-dis.c (ppc_opts): Likewise.
Rename "ppca2" to "a2".
2009-10-01 19:24:48 +00:00
c7927a3c0e
bfd
...
* Makefile.am (ALL_MACHINES): Add cpu-rx.lo.
(ALL_MACHINES_CFILES): Add cpu-rx.c.
(BFD32_BACKENDS): Add elf32-rx.lo.
(BFD32_BACKENDS_CFILES): Add elf32-rx.c.
* archures.c (bfd_architecture): Add bfd_arch_rx and bfd_mach_rx.
Export bfd_rx_arch.
(bfd_archures_list): Add bfd_rx_arch.
* config.bfd: Add entry for rx-*-elf.
* configure.in: Add entries for bfd_elf32_rx_le_vec and
bfd_elf32_rx_be_vec.
* reloc.c: Add RX relocations.
* targets.c: Add RX target vectors.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* libbfd.h: Regenerate.
* cpu-rx.c: New file.
* elf32-rx.c: New file.
binutils
* readelf.c: Add support for RX target.
* MAINTAINERS: Add DJ and NickC as maintainers for RX.
gas
* Makefile.am: Add RX target.
* configure.in: Likewise.
* configure.tgt: Likewise.
* read.c (do_repeat_with_expander): New function.
* read.h: Provide a prototype for do_repeat_with_expander.
* doc/Makefile.am: Add RX target documentation.
* doc/all.texi: Likewise.
* doc/as.texinfo: Likewise.
* Makefile.in: Regenerate.
* NEWS: Mention support for RX architecture.
* configure: Regenerate.
* doc/Makefile.in: Regenerate.
* config/rx-defs.h: New file.
* config/rx-parse.y: New file.
* config/tc-rx.h: New file.
* config/tc-rx.c: New file.
* doc/c-rx.texi: New file.
gas/testsuite
* gas/rx: New directory.
* gas/rx/*: New set of test cases.
* gas/elf/section2.e-rx: New expected output file.
* gas/all/gas.exp: Add support for RX target.
* gas/elf/elf.exp: Likewise.
* gas/lns/lns.exp: Likewise.
* gas/macros/macros.exp: Likewise.
include
* dis-asm.h: Add prototype for print_insn_rx.
include/elf
* rx.h: New file.
include/opcode
* rx.h: New file.
ld
* Makefile.am: Add rules to build RX emulation.
* configure.tgt: Likewise.
* NEWS: Mention support for RX architecture.
* Makefile.in: Regenerate.
* emulparams/elf32rx.sh: New file.
* emultempl/rxelf.em: New file.
opcodes
* Makefile.am: Add RX files.
* configure.in: Add support for RX target.
* disassemble.c: Likewise.
* Makefile.in: Regenerate.
* configure: Regenerate.
* opc2c.c: New file.
* rx-decode.c: New file.
* rx-decode.opc: New file.
* rx-dis.c: New file.
2009-09-29 14:17:19 +00:00
Maciej W. Rozycki
Mike Frysinger
Bernd Schmidt
Dave Anglin
Richard Sandiford
Andreas Krebbel
Nick Clifton
Matthew Gretton-Dann
Alan Modra
DJ Delorie
Catherine Moore
Joseph Myers
H.J. Lu
Doug Evans
Paul Brook
Peter Bergner