A lot of cpu state is stored in global variables, as is memory handling.
The sim_size support needs unwinding at some point. But at least this
is an improvement on the status quo.
In preparation for converting to nrun, call the common functions that
are needed. This doesn't produce any new warnings, and the generated
code should be the same.
A lot of cpu state is stored in global variables, as is memory handling.
The sim_size support needs unwinding at some point. But at least this
is an improvement on the status quo.
In preparation for converting to nrun, call the common functions that
are needed. This doesn't produce any new warnings, and the generated
code should be the same.
Looks like historical restructuring in this dir lost the d10v-elf subdir
and no one noticed in the meantime. Re-add it to the testsuite.
There are some failures, but better some tests get run than none at all.
A lot of cpu state is stored in global variables, as is memory handling.
The sim_size support needs unwinding at some point. But at least this
is an improvement on the status quo.
In preparation for converting to nrun, call the common functions that
are needed. This doesn't produce any new warnings, and the generated
code should be the same.
This port already was storing its cpu state in the sim_cpu structure, so
converting it over was pretty easy. It is allocating memory itself still,
but we'll fix that up in the future at some point.
The mcore port had a few structs/defines that were never used.
Similarly, the microblaze port, because it was copied from mcore, has
that same dead code, and more. The watchpoint logic was never actually
used. Punt it all.
Since the sim doesn't have any debug support in it, we can only exit
cleanly. But this is still better than nothing.
Change the default microblaze sim to not dump the debug load output
when running. No other does this, and it breaks the testsuite.
If a test doesn't write anything at all to stdout, the current test
framework can't support that. Even if you put a blank output line:
# output:
the setup happily clobbers that with a default pass/fail string.
Tweak the parsing logic so we only set the output to pass/fail when
the test has no output marker.
With newer versions of gcc (5.x), the extern inline we're using with the
sim-arange module no longer works. Since this code really wants the gnu
inline semantics, use that attribute explicitly.
Reported-by: DJ Delorie <dj@redhat.com>
Reported-by: Joel Sherrill <joel.sherrill@oarcorp.com>
Since the testsuite subdir has to handle dynamic arch values already,
there's no real value in requiring arches to opt in to it. Most have
a testsuite now anyways, and we're requiring it in the future.
In preparation for converting to nrun, call the common functions that
are needed. This doesn't produce any new warnings, and the generated
code should be the same.
A lot of cpu state is stored in global variables, as is memory handling.
The sim_size support needs unwinding at some point. But at least this
is an improvement on the status quo.
In preparation for converting to nrun, call the common functions that
are needed. This doesn't produce any new warnings, and the generated
code should be the same.
The sbrk syscall assumes the sbrk region starts after the bss and the
current implementation requires a bss section to exist. Since there
is no requirement for programs to have a bss in general, we want to
drop this check. However, there is still the sbrk syscall that wants
to know about the region.
Since libgloss doesn't actually use the sbrk syscall (it implements
sbrk in its own way), and the sim really shouldn't enforce a specific
memory layout on programs, lets simply delete sbrk support. Now it
always returns an error.
A lot of cpu state is stored in global variables, as is memory handling.
The sim_size support needs unwinding at some point. But at least this
is an improvement on the status quo.
The build line was missing the normal BUILD_xxx flags. Once we added
that, we get warnings that weren't shown before. As we fix those, we
notice that the -d option segfaults because it tries to write readonly
memory. Fix that too as part of the const/prototype clean up.
The previous profile change broke these sims that use sim-profile but
not sim-cpu (due to missing model support). Add simple funcs until we
can convert these over properly.
The profile code was using STATE_WATCHPOINTS to get access to the PC, but
we already have a standard method for getting the pc, so switch to that.
This assumes that sizeof_pc is the same size as sim_cia, but we already
assume this in places by way of sim_pc_{get,set}, and this is how it's
documented in the sim-base.h API.
This partially reverts commits:
105dd264de3df3af7c3fc4892a6b379e3042ec07
Now that dv-sockser is handled entirely by the common build logic, the
failure these targets were hitting isn't really possible anymore. Lets
reset their hardware status back to defaulting to on. Some of these
were set to "always" previously, but we don't support that anymore.
The current default handling for the --enable-sim-hardware option ends up
forcing the value to whatever is set as the first argument when calling
the macro (by virtue of how autoconf works). Relocate the setup code to
the 4th parameter of the AC_ARG_ENABLE macro to fix it.
This was caused by the simplification work in 1517bd2742.
Reported-by: Hans-Peter Nilsson <hans-peter.nilsson@axis.com>
Since no sim is using the "always" option to SIM_AC_OPTION_HARDWARE, and
we don't want to require hw support to always be enabled, drop the option.
This leads to a slight simplification in the macro too as we can collapse
the sim_hw_p variable.
This looks like copy & paste logic from the m32r port (and history
suggests this as well). Since building with hw & device support
enabled leads to failures:
sim/frv/devices.c: In function 'device_io_read_buffer':
sim/frv/devices.c:39:15: error: 'UART_INCHAR_ADDR' undeclared (first use in this function)
Delete it entirely. We leave device support in place as it is used
to flush the scache.
If dv-sockser is available, lets add it to the common SIM_HW_OBJS
variable so it is always included automatically. Now ports do not
have to shoe horn it in directly themselves. It does mean it will
be compiled for targets that don't explicitly use it, but that's
really what we want anyways.
This lets ports assume that the dv-sockser API is always available if
they want to. This way we don't have to do an abort at configure time
and it makes the resulting code a bit simpler.
* load.c (rl78_load): If the G10, G13 or G14 flag bits are set in
the ELF header use them to select the proper emulation mode.
* mem.c (mem_put_byte): Use mem_put_hi to store a value into the
MDB register.
(mem_get_byte): Use mem_get_hi to extract a value from the MDB
register.
Rather than manually include tconfig.h when we think we'll need it (which
is error prone as it can define symbols we expect from config.h), have it
be included directly by config.h. Since we know we have to include that
header everywhere already, this will make sure tconfig.h isn't missed.
It should also be fine as tconfig.h is supposed to be simple and only set
up a few core defines for the target.
This allows us to stop symlinking it in place all the time and just use
it straight out of the respective source directory.
Pull out the duplicated dv_sockser_install prototype from the tconfig.in
files and put it in the one place it gets used -- sim-module.c. This is
still arguably incorrect, but it's better than the status quo where the
tconfig.in has to include header files and duplicate the dv-sockser func.
The tconfig header is meant to be simple and contain a target defines.
This dates back to the start of the repo, but has never really been used.
The sim-inline.c file has been checked in to the source, and attempts to
build it in the build tree leads to a circular dep warning from make. It
also doesn't produce a file that is usable -- it can't be compiled. Punt!
We want people to stop using the run.c frontend, but it's hard to notice
when it's still set as the default. Lets flip things so nrun.c is the
default, and users of run.c will get an error by default. We turn that
error into a warning for existing sims so we don't break them -- this is
mostly meant for people starting new ports.
Since sim-endian.c doesn't actually use sim_io funcs, it's weird to
include the sim-io.h header here. It's doing so only for the assert
header. So lets relocate the include to the right place.
Add a trailing semi-colon to the sed print command as the BSD sed
implementation wants it. It's a nop otherwise and works fine on
GNU/etc... implementations too.
The use of $< ends up picking the wrong object out of the depend
list. Specify the input name directly to avoid fragility.
On BSD systems, we need to make sure all options come before the
non-options (i.e. the files).
Reported-by: Chris Johns <chrisj@rtems.org>
URL: https://sourceware.org/bugzilla/show_bug.cgi?id=13160
* v850.igen: Add more e3v5 support.
(FMAF.S): New pattern.
(FMSF.S): New pattern.
(FNMAF.S): New pattern.
(FNMSF.S): New pattern.
(cnvq15q30): New pattern.
(cnvq30q15): New pattern.
(cnvq31q62): New pattern.
(cnvq62q31): New pattern.
(dup.h): New pattern.
(dup.w): New pattern.
(expq31): New pattern.
(modadd): New pattern.
(mov.dw): New pattern.
(mov.h): New pattern.
(mov.w): New pattern.
(pki16i32): New pattern.
(pki16ui8): New pattern.
(pki32i16): New pattern.
(pki64i32): New pattern.
(pkq15q31): New pattern.
(pkq30q31): New pattern.
(pkq31q15): New pattern.
(pkui8i16): New pattern.
(vabs.h): New pattern.
(vabs.w): New pattern.
(vadd.dw): New placeholder pattern.
(vadd.h): New placeholder pattern.
(vadd.w): New placeholder pattern.
(vadds.h): New placeholder pattern.
(vadds.w): New placeholder pattern.
(vaddsat.h): New placeholder pattern.
(vaddsat.w): New placeholder pattern.
(vand): New pattern.
(vbiq.h): New placeholder pattern.
(vbswap.dw): New placeholder pattern.
(vbswap.h): New placeholder pattern.
(vbswap.w): New placeholder pattern.
(vcalc.h): New placeholder pattern.
(vcalc.w): New placeholder pattern.
(vcmov): New placeholder pattern.
* msp430-sim.c (sim_open): Allocate memory regions matching those
declared in the libgloss/msp430 linker scripts.
Allow sim_load_file to fail.
(get_op): Test the correct address bit when checking for out of
range addresses.
Include the address in the error message when an illegal access to
the hardware multiplier is detected.
(put_op): Test the correct address bit when checking for out of
range addresses.
Binaries produced by most erc32 tool-chains do not include
system initialization. sis will detect this and initialize
necessary registers for memory and timer control.
These look like left over hacks from the days where we had to protect
ourselves from the compiler and C library. None of these checks are
relevant, and we have common configure logic to do header tests. Punt
them all now.
Commit 07774fccc3 update the microblaze
opcodes table to avoid C++ collisions, but missed updating the sim.
That caused it to fail to build due to missing keywords.
After successfully call buildargv(), the code need to be sure of calling
freeargv() in any cases.
2015-02-02 Chen Gang <gang.chen.5i5j@gmail.com>
* common/sim-options.c (sim_args_command): Call freeargv() when
failure occurs.
This should fix a build failure reported on x86_64-mingw32 by Daniel
Calcoen due to conflicting declarations of "open". This patch just
renames the static global in sim/rx/gdb-if.c into "rx_sim_is_open".
sim/rx/ChangeLog:
* gdb-if.c (open): Rename to...
(rx_sim_is_open): This. Replace all uses of "open" by uses of
"rx_sim_is_open" throughout.
Tested by rebuilding on x86_64-linux.
... using automake 1.11.1, which is the version we're currently
using throughout, instead of 1.11.3. This should be a no-op in
practice, but will help automake/aclocal version-related
differences to cloud real changes being made.
sim/common/ChangeLog:
* aclocal.m4, configure: Regenerate using automake 1.11.1.
On Windows, a recent gnulib update imported the lstat module, and
this caused a remote-sim.c build failure in struct host_callback_struct:
In file included from /[...]/gdb/remote-sim.c:34:0:
/[...]/gdb/../include/gdb/callback.h:93:9: error: duplicate member '_stati64'
int (*lstat) (host_callback *, const char *, struct stat *);
^
What happens it that gnulib's stat.h makes the following defines:
/* Large File Support on native Windows. */
#if 1
# define stat _stati64
#endif
and then:
#if 1
# if ! 0
/* mingw does not support symlinks, therefore it does not have lstat. But
without links, stat does just fine. */
# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
# define lstat stat
# endif
So, the following fields in struct host_callback_struct...
int (*stat) (host_callback *, const char *, struct stat *);
int (*fstat) (host_callback *, int, struct stat *);
int (*lstat) (host_callback *, const char *, struct stat *);
... get translated to...
int (*_stati64) (host_callback *, const char *, struct _stati64 *);
int (*_fstati64) (host_callback *, int, struct _stati64 *);
int (*_stati64) (host_callback *, const char *, struct _stati64 *);
... which causes two fields to have the same name.
This patch fixes the issue by renaming the stat-related fields
by adding a "to_" prefix, similar to what is done in GDB's
target_ops vector.
include/gdb/ChangeLog:
* callback.h (struct host_callback_struct) <to_stat>: Renamed
from "stat".
<to_fstat>: Renamed from "fstat".
<to_lstat>: Renamed from "lstat".
sim/common/ChangeLog:
* sim-io.c (sim_io_stat, sim_io_fstat): Adjust calls to "stat"
and "fstat" callbacks by calls to "to_stat" and "to_fstat" (resp)
callbacks following renaming in callback.h.
* syscall.c (cb_syscall): Likewise. Adjust calls to "lstat"
callback by call to "to_lstat" callback
sim/cris/ChangeLog:
* traps.c (cris_break_13_handler): Adjust call to "fstat" callback
by call to "to_fstat" following renaming in callback.h.
sim/h8300/ChangeLog:
* compile.c (sim_resume): Adjust calls to "stat" and "fstat"
callbacks by calls to "to_stat" and "to_fstat" (resp) callbacks
following renaming in callback.h.
It seems that the implementation of the SH fabs and fneg insns in the
simulator is not correct. They use the FP_UNARY macro which checks the
FPSCR.PR setting and raises an exception if PR = 1 (double precision)
and the register number is not even (i.e. a valid DF reg number).
For normal unary FP insns this is fine. However, fneg and fabs perform
the same (integer) operations regardless of the FPSCR.PR setting.
This issue initially popped up here
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=63260
I've checked some of the failing tests mentioned in GCC PR 63260 above
with the patch applied and the failures go away.
sim/sh/ChangeLog (tiny patch):
* gencode.c (fabs, fneg): Implement as integer operation
instead of using the FP_UNARY macro.
GDB and SIM both have functions called "debug_printf", which conflicts
at link time. This commit shadows SIM's debug_printf with a macro so
that SIM's symbol ends up being called "sim_debug_printf".
sim/common/ChangeLog:
* sim-trace.h (debug_printf): New define.
The situation here is similar to that of the other nearby (previous)
sims fixed; it fails at the dv_sockser_install declaration in
sim/m32r/tconfig.in. But, as opposed to e.g. frv, this *does* have a
definition of UART_INCHAR_ADDR et al. It's somewhat tempting to keep
sim-hardware enabled here but, I'm disabling it for the same reasons
as for frv. Unsurprisingly (as m32r seems to be the template), the
same confusing lines are in sim/m32r/Makefile.in as in
sim/frv/Makefile.in at that time, deleted in 73e76d20. Again, commit
73e76d20 (for m32r as well as for frv) attempted to move the
non-existing dv-sockser.o use to $(m32r_extra_objs) but missed that
AC_SUBST would only affect @m32r_extra_objs@ and not
$(m32r_extra_objs) per se so nothing happened. As for frv, I'm
removing the $(m32r_extra_objs) too, to avoid confusion. Make
check-sim for m32r-elf shows no regressions (5 failures; 100 expected
passes) compared to bf3d9781ec (before the recent config.in regen,
after sim-hardware mostly-enabled) and eed23bb4a1 (before the
sim-hardware mostly-enabled; 2013-03-23).
sim/m32r:
* configure.ac: Default simulator hardware to off again. Remove
dead m32r_extra_objs substitution.
* configure: Regenerate.
* Makefile.in: Remove unused frv_extra_objs.
See nearby (previous) commit for the iq2000 sim; this similarly fails
at the dv_sockser_install declaration in sim/sh64/tconfig.in. I'm
disabling simulator hardware to be consistent with the state before
94c63d78f (2013-03-23) and with the actions for the frv sim and the
iq2000 sim. Make check-sim for sh64-elf shows no regressions (25
failures; 357 expected passes) compared to bf3d9781ec (before the
recent config.in regen, after sim-hardware mostly-enabled) and
eed23bb4a1 (before the sim-hardware mostly-enabled; 2013-03-23).
sim/sh64:
* configure.ac: Default simulator hardware to off again
without emitting errors when off or dv-sockser.o unavailable.
* configure: Regenerate.
See nearby (previous) commit for the frv sim; this similarly fails at
the dv_sockser_install declaration in sim/iq2000/tconfig.in. There's
no HAVE_DV_SOCKSER conditionals here and no other dv-sockser.o
artefacts so maybe there is no further fallout, but I'm going to
disable sim-hardware just be consistent with the state before
94c63d78f (2013-03-23) and with the actions for the frv sim. Make
check-sim for iq2000-elf shows no failures but that's in no small part
because it has no test-suite.
sim/iq2000:
* configure.ac: Default simulator hardware to off again
without emitting errors when off or dv-sockser.o unavailable.
* configure: Regenerate.
At 2974be626, frv-elf fails at the dv_sockser_install declaration in
sim/frv/tconfig.in. But, with the trivial #include's added (see other
sims tconfig.in, like cris or mn10300), it *still* fails building
sim/frv/devices.c because of a missing UART_INCHAR_ADDR. I have no
insight into what'd be a valid value, except that there's a definition
in m32r, which was probably used as a template with frv not finished.
Simulated hardware should not have been be enabled, and was indeed not
enabled by default before 94c63d78f (2013-03-23), where it seems to
have been enabled for no simulator-specific reason. Except
dv-sockser.o wasn't enabled even then: sim/frv/config.in wasn't
regenerated, so HAVE_DV_SOCKSER was never defined. Maybe people were
fooled by this in sim/frv/Makefile.in at that time (these two lines
were later deleted, in 73e76d20):
CONFIG_DEVICES = dv-sockser.o
CONFIG_DEVICES =
(As it seems people have missed it before: the second line overrides
the first...) I'm guessing these lines were part of the
never-completed hardware-support. Commit 73e76d20 attempted to move
the imagined dv-sockser.o from $(CONFIG_DEVICES) to $(frv_extra_objs)
but missed that AC_SUBST would only affect @frv_extra_objs@ (not
$(frv_extra_objs) per se) so nothing happened regarding sockser:
dv-sockser.o was not compiled and HAVE_DV_SOCKSER was not defined.
I'm removing the $(frv_extra_objs) too, to avoid confusion. The best
action seems to be disabling all hardware support by default again
until a specific sim maintainer finishes the work.
Make check-sim for frv-elf shows no failures after this.
sim/frv:
* configure.ac: Default simulator hardware to off again. Remove
dead frv_extra_objs substitution.
* configure: Regenerate.
* Makefile.in: Remove unused frv_extra_objs.
Directories that don't use libtool need to add -ldl (on most *nix
hosts) to provide dlopen for libbfd.
config/
* plugins.m4 (AC_PLUGINS): If plugins are enabled, add -ldl to
LIBS via AC_SEARCH_LIBS.
gdb/
* acinclude.m4 (GDB_AC_CHECK_BFD): Don't add -ldl.
* config.in: Regenerate.
sim/ppc/
* configure.ac: Invoke AC_PLUGINS.
* config.in: Regenerate.
and regen lots of configure files.
* msp430-sim.c: Move static hardware multiply support variables
from here...
* msp430-sim.h (msp430_cpu_state): ... into here ...
* msp430-sim.c (get_op, put_op): ... and update references to use
the msp430_cpu_state structure.
* msp430-sim.c (get_op): Handle reads of low result register when
in MAC mode.
(put_op): Copy MAC result into result words.
Handle writes to the low result register.
* msp430-sim.c (sim_open): Do not allocate memory over the
hardware multiply registers.
(get_op): Add support for reads from the hardware multiply
registers.
(put_op): Add support for writes to the hardware multiply
registers.
(msp430_step_once): Add support for the RETI instruction used by
the CPUX architecture.
PR sim/8388
* armemu.c (WriteR15Load): New function. Determines if the state
can be changed upon a write to R15.
(LoadMult): Use WriteR15Load.
* armemu.h (WRITEDESTB): Use WriteR15Load.
This fix is simple:
msp430-sim.c: In function 'maybe_perform_syscall':
msp430-sim.c:898:10: warning: format '%d' expects argument of type 'int',
but argument 5 has type 'long int' [-Wformat]
This one we change to use casts like everyone else does in the code base:
msp430-sim.c: In function 'msp430_step_once':
msp430-sim.c:985:7: warning: passing argument 3 of 'init_disassemble_info'
from incompatible pointer type [enabled by default]
include/dis-asm.h:368:13: note: expected 'fprintf_ftype' but argument is
of type 'int (*)(struct FILE * __restrict__, const char * __restrict__)'
It is rare for people to want to modify the cmd arg. In general, they
really shouldn't be, but a few still do. For those who misbehave, dupe
the string locally so they can bang on it.
sim/rx/gdb-if.c had a function named `rx_signal_to_host'. This
function mapped signal numbers used by the BSP to host signal
numbers which, at one time a while back, were used by GDB
as target signal numbers. This change updates the signal
numbers returned to be those names prefixed with "GDB_SIGNAL_"
as defined in include/gdb/signals.h.
It also changes the name of the function somewhat to better
match what the function currently does. I noticed that this
function is not static - and there's no reason for it not
to be - so I made it static too.
* gdb-if.c (rx_signal_to_host): Rename to
`rx_signal_to_gdb_signal'. Make static. Update all callers
to use new name. Use signal names from include/gdb/signals.h.
Many of the simulators change the SIGINT handler.
E.g., moxie/interp.c:
sigsave = signal (SIGINT, interrupt);
However, this is unnecessary.
remote-sim.h already provides an API for asynchronously stopping
a sim; and both gdb and the drivers (run.c and nrun.c at least,
I didn't check the others) install a SIGINT handler which
calls this method.
URL: https://sourceware.org/bugzilla/show_bug.cgi?id=16450
Reported-by: Tom Tromey <tromey@redhat.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
When cross-compiling GDB for PPC, there's a prerequisite "-lz" for psim
that results in a build failure. With such prerequisite, GNU Make will
try to search the library from build machine's /usr/lib which is wrong.
On 64-bit Linux build machines the compilation will fail because of this.
URL: https://sourceware.org/bugzilla/show_bug.cgi?id=12202
This removes the last uses of PARAMS from sim.
2014-01-06 Tom Tromey <tromey@redhat.com>
* README-HACKING: Don't use PARAMS.
* arm/wrapper.c: Don't use PARAMS.
* bfin/sim-main.h: Don't use PARAMS.
* common/callback.c: Don't use PARAMS.
* common/cgen-trace.c: Don't use PARAMS.
* common/run-sim.h: Don't use PARAMS.
* common/run.c: Don't use PARAMS.
* common/sim-base.h: Don't use PARAMS.
* common/sim-load.c: Don't use PARAMS.
* common/sim-options.h: Don't use PARAMS.
* common/sim-trace.c: Don't use PARAMS.
* common/sim-trace.h: Don't use PARAMS.
* common/sim-utils.h: Don't use PARAMS.
* cr16/cr16_sim.h: Don't use PARAMS.
* cr16/gencode.c: Don't use PARAMS.
* cr16/interp.c: Don't use PARAMS.
* cr16/simops.c: Don't use PARAMS.
* d10v/d10v_sim.h: Don't use PARAMS.
* d10v/gencode.c: Don't use PARAMS.
* d10v/interp.c: Don't use PARAMS.
* d10v/simops.c: Don't use PARAMS.
* erc32/erc32.c: Don't use PARAMS.
* erc32/exec.c: Don't use PARAMS.
* erc32/float.c: Don't use PARAMS.
* erc32/func.c: Don't use PARAMS.
* erc32/sis.c: Don't use PARAMS.
* erc32/sis.h: Don't use PARAMS.
* mips/interp.c: Don't use PARAMS.
* mips/sim-main.h: Don't use PARAMS.
* sh/interp.c: Don't use PARAMS.
* v850/sim-main.h: Don't use PARAMS.
* v850/v850_sim.h: Don't use PARAMS.
I meant for this script to be +x, but missed when doing the initial CVS
commit. It wasn't possible to fix w/CVS, but it is w/git, so do it.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-12-03 Mike Frysinger <vapier@gentoo.org>
* run-tests.sh: Add +x file mode.
These files are source files and have no business being +x. We couldn't
easily fix it in CVS (you need login+write access to the raw rcs files),
but we can fix this w/git.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger
Jiri Gaisler
James Bowman
Nick Clifton
Chen Gang
Joel Brobecker
Anthony Green
Oleg Endo
Joel Sherrill
Gary Benson
Hans-Peter Nilsson
Alan Modra
Roland McGrath
Michael Eager
DJ Delorie
David McQuillan
Kevin Buettner
Aaro Koskinen
Tom Tromey
Steve Ellcey
Will Newton