PR binutils/18025
* coffgen.c (coff_find_nearest_line_with_names): If the dwarf2
lookup fails, check for an address bias in the dwarf info, and if
one exists, retry the lookup with the biased value.
* dwarf2.c (_bfd_dwarf2_find_symbol_bias): New function.
Determines if a bias exists bewteen the addresses of functions
based on DWARF information vs symbol table information.
* libbfd-in.h (_bfd_dwarf2_find_symbol_bias): Prototype.
* libbfd.h: Regenerate.
These were the BFD changes needed for building a C++ GDB with
--enable-targets=all, on x86_64 Fedora 20.
For libbfd.h and libcoff.h, this does same as already done when
generating bfd.h: open extern "C" in the -in.h header, and close it
from the Makefile.
bfd/doc/ChangeLog:
2015-02-11 Pedro Alves <palves@redhat.com>
* Makefile.am (libbfd.h, libcoff.h): Close extern "C" scope.
* Makefile.in: Regenerate.
bfd/ChangeLog:
2015-02-11 Pedro Alves <palves@redhat.com>
* libbfd-in.h [__cplusplus]: Open extern "C" scope.
* libcoff-in.h [__cplusplus]: Open extern "C" scope.
* libbfd.h: Regenerate.
* libcoff.h: Regenerate.
* elf-bfd.h [__cplusplus]: Wrap in extern "C".
* mach-o.h [__cplusplus]: Wrap in extern "C".
* som.h [__cplusplus]: Wrap in extern "C".
PR binutils/17512
* objdump.c (display_any_bfd): Avoid infinite loop closing and
opening the same archive again and again.
* archive64.c (bfd_elf64_archive_slurp_armap): Add range checks.
* libbfd.c (safe_read_leb128): New function.
* libbfd-in.h (safe_read_leb128): Add prototype.
* libbfd.h: Regenerate.
* elf-attrs.c (_bfd_elf_parse_attributes): Use safe_read_leb128.
Check for an over-long subsection length.
* elf.c (elf_parse_notes): Check that the namedata is long enough
for the string comparison that is about to be performed.
(elf_read_notes): Zero-terminate the note buffer.
Refactor each relaxation pattern to raise the maintainability.
In origin, all patterns is analysed in nds32_elf_relax_section,
so it is hard to debug and maintain. Therefore, we classify all
patterns into different functions in this patch.
Moreover, we adjust all optimizations into nds32_elf_relax_section
to take these optimizations in turn. This can promise all relaxation
being done after calling gld${EMULATION_NAME}_after_allocation.
bfd/
* aoutx.h (NAME (aout, machine_type)): Add mips32r6 and mips64r6.
* archures.c (bfd_architecture): Likewise.
* bfd-in2.h (bfd_architecture): Likewise.
(bfd_reloc_code_real): Add relocs BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and
BFD_RELOC_MIPS_19_PCREL_S2.
* cpu-mips.c (arch_info_struct): Add mips32r6 and mips64r6.
* elf32-mips.c: Define relocs R_MIPS_PC21_S2, R_MIPS_PC26_S2
R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16.
(mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
* elf64-mips.c: Define REL, and RELA relocations R_MIPS_PC21_S2,
R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16
and R_MIPS_PCLO16.
(mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
* elfn32-mips.c: Likewise.
* elfxx-mips.c (MIPSR6_P): New define.
(mipsr6_exec_plt_entry): New array.
(hi16_reloc_p): Add support for R_MIPS_PCHI16.
(lo16_reloc_p): Add support for R_MIPS_PCLO16.
(aligned_pcrel_reloc_p): New function.
(mips_elf_relocation_needs_la25_stub): Add support for relocs:
R_MIPS_PC21_S2 and R_MIPS_PC26_S2.
(mips_elf_calculate_relocation): Add support for relocs:
R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2,
R_MIPS_PCHI16 and R_MIPS_PCLO16.
(_bfd_elf_mips_mach): Add support for mips32r6 and mips64r6.
(mips_elf_add_lo16_rel_addend): Add support for R_MIPS_PCHI16.
(_bfd_mips_elf_check_relocs): Add support for relocs:
R_MIPS_PC21_S2 and R_MIPS_PC26_S2.
(_bfd_mips_elf_relocate_section): Add a check for unaligned
pc relative relocs.
(_bfd_mips_elf_finish_dynamic_symbol): Add support for MIPS r6
plt entry.
(mips_set_isa_flags): Add support for mips32r6 and mips64r6.
(_bfd_mips_elf_print_private_bfd_data): Likewise.
(mips_32bit_flags_p): Add support for mips32r6.
* libbfd.h (bfd_reloc_code_real_names): Add entries for
BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2,
BFD_RELOC_MIPS_18_PCREL_S3 and BFD_RELOC_MIPS_19_PCREL_S2.
* reloc.c: Document relocs BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and
BFD_RELOC_MIPS_19_PCREL_S2.
binutils/
* readelf.c (get_machine_flags): Add support for mips32r6 and
mips64r6.
elfcpp/
* mips.h (E_MIPS_ARCH_32R6, E_MIPS_ARCH_64R6): New enum constants.
gas/
* config/tc-mips.c (mips_nan2008): New static global.
(mips_flag_nan2008): Removed.
(LL_SC_FMT): New define.
(COP12_FMT): Updated.
(ISA_IS_R6): New define.
(ISA_HAS_64BIT_REGS): Add mips64r6.
(ISA_HAS_DROR): Likewise.
(ISA_HAS_64BIT_FPRS): Add mips32r6 and mips64r6.
(ISA_HAS_ROR): Likewise.
(ISA_HAS_ODD_SINGLE_FPR): Likewise.
(ISA_HAS_MXHC1): Likewise.
(hilo_interlocks): Likewise.
(md_longopts): Likewise.
(ISA_HAS_LEGACY_NAN): New define.
(options): Add OPTION_MIPS32R6 and OPTION_MIPS64R6.
(mips_ase): Add field rem_rev.
(mips_ases): Updated to add which ISA an ASE was removed in.
(mips_isa_rev): Add support for mips32r6 and mips64r6.
(mips_check_isa_supports_ase): Add support to check if an ASE
has been removed in the specified MIPS ISA revision.
(validate_mips_insn): Skip '-' character.
(macro_build): Likewise.
(mips_check_options): Prevent R6 working with fp32, mips16,
micromips, or branch relaxation.
(file_mips_check_options): Set R6 floating point registers to
64 bit. Also deal with the nan2008 option.
(limited_pcrel_reloc_p): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(operand_reg_mask): Add support for OP_SAME_RS_RT, OP_CHECK_PREV
and OP_NON_ZERO_REG.
(match_check_prev_operand): New static function.
(match_same_rs_rt_operand): New static function.
(match_non_zero_reg_operand): New static function.
(match_operand): Added entries for: OP_SAME_RS_RT, OP_CHECK_PREV
and OP_NON_ZERO_REG.
(insns_between): Added case to deal with forbidden slots.
(append_insn): Added support for relocs: BFD_RELOC_MIPS_21_PCREL_S2
and BFD_RELOC_MIPS_26_PCREL_S2.
(match_insn): Add support for operands -A, -B, +' and +". Also
skip '-' character.
(mips_percent_op): Add entries for %pcrel_hi and %pcrel_lo.
(md_parse_option): Add support for mips32r6 and mips64r6. Also
update the nan option handling.
(md_pcrel_from): Add cases for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2.
(mips_force_relocation): Prevent forced relaxation for MIPS r6.
(md_apply_fix): Add support for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(s_mipsset): Add support for mips32r6 and mips64r6.
(s_nan): Update to support the new nan2008 framework.
(tc_gen_reloc): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(mips_elf_final_processing): Updated to use the mips_nan2008.
(mips_cpu_info_table): Add entries for mips32r6 and mips64r6.
(macro): Enable ldc2, sdc2, ll, lld, swc2, sc, scd, cache, pref
macros for R6.
(mips_fix_adjustable): Make PC relative R6 relocations relative
to the symbol and not the section.
* configure.ac: Add support for mips32r6 and mips64r6.
* configure: Regenerate.
* doc/c-mips.texi: Document the -mips32r6 and -mips64r6 command line
options.
* doc/as.texinfo: Likewise.
gas/testsuite/
* gas/mips/24k-triple-stores-1.s: If testing for r6 prevent
non-supported instructions from being tested.
* gas/mips/24k-triple-stores-2.s: Likewise.
* gas/mips/24k-triple-stores-3.s: Likewise.
* gas/mips/24k-triple-stores-6.s: Likewise.
* gas/mips/beq.s: Likewise.
* gas/mips/eva.s: Likewise.
* gas/mips/ld-zero-3.s: Likewise.
* gas/mips/mips32-cp2.s: Likewise.
* gas/mips/mips32.s: Likewise.
* gas/mips/mips4.s: Likewise.
* gas/mips/add.s: Don't test the add instructions if r6, and
add padding.
* gas/mips/add.d: Check for a triple dot not a nop at the end of the
disassembly output.
* gas/mips/micromips@add.d: Likewise.
* gas/mips/mipsr6@24k-branch-delay-1.d: New file.
* gas/mips/mipsr6@24k-triple-stores-1.d: New file.
* gas/mips/mipsr6@24k-triple-stores-2-llsc.d: New file.
* gas/mips/mipsr6@24k-triple-stores-2.d: New file.
* gas/mips/mipsr6@24k-triple-stores-3.d: New file.
* gas/mips/mipsr6@24k-triple-stores-6.d: New file.
* gas/mips/mipsr6@add.d: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msingle-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msingle-float.s: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msoft-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msoft-float.s: New file.
* gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.s: New file.
* gas/mips/mipsr6@beq.d: New file.
* gas/mips/mipsr6@bge.d: New file.
* gas/mips/mipsr6@bgeu.d: New file.
* gas/mips/mipsr6@blt.d: New file.
* gas/mips/mipsr6@bltu.d: New file.
* gas/mips/mipsr6@branch-misc-1.d: New file.
* gas/mips/mipsr6@branch-misc-2-64.d: New file.
* gas/mips/mipsr6@branch-misc-2pic-64.d: New file.
* gas/mips/mipsr6@branch-misc-4-64.d: New file.
* gas/mips/mipsr6@cache.d: New file.
* gas/mips/mipsr6@eva.d: New file.
* gas/mips/mipsr6@jal-svr4pic-noreorder.d: New file.
* gas/mips/mipsr6@jal-svr4pic.d: New file.
* gas/mips/mipsr6@ld-zero-2.d: New file.
* gas/mips/mipsr6@ld-zero-3.d: New file.
* gas/mips/mipsr6@loc-swap-dis.d: New file.
* gas/mips/mipsr6@mips32-cp2.d: New file.
* gas/mips/mipsr6@mips32-imm.d: New file.
* gas/mips/mipsr6@mips32.d: New file.
* gas/mips/mipsr6@mips32r2.d: New file.
* gas/mips/mipsr6@mips4-fp.d: New file.
* gas/mips/mipsr6@mips4-fp.l: New file.
* gas/mips/mipsr6@mips4-fp.s: New file.
* gas/mips/mipsr6@mips4.d: New file.
* gas/mips/mipsr6@mips5-fp.d: New file.
* gas/mips/mipsr6@mips5-fp.l: New file.
* gas/mips/mipsr6@mips5-fp.s: New file.
* gas/mips/mipsr6@mips64.d: New file.
* gas/mips/mipsr6@msa-branch.d: New file.
* gas/mips/mipsr6@msa.d: New file.
* gas/mips/mipsr6@pref.d: New file.
* gas/mips/mipsr6@relax-swap3.d: New file.
* gas/mips/r6-64-n32.d: New file.
* gas/mips/r6-64-n64.d: New file.
* gas/mips/r6-64-removed.l: New file.
* gas/mips/r6-64-removed.s: New file.
* gas/mips/r6-64.s: New file.
* gas/mips/r6-attr-none-double.d: New file.
* gas/mips/r6-n32.d: New file.
* gas/mips/r6-n64.d: New file.
* gas/mips/r6-removed.l: New file.
* gas/mips/r6-removed.s: New file.
* gas/mips/r6.d: New file.
* gas/mips/r6.s: New file.
* gas/mips/mipsr6@mips32-dsp.d: New file.
* gas/mips/mipsr6@mips32-dspr2.d: New file.
* gas/mips/mipsr6@mips32r2-ill.l: New file.
* gas/mips/mipsr6@mips32r2-ill.s: New file.
* gas/mips/cache.s: Add r6 instruction varients.
* gas/mips/mips.exp: Add support for the mips32r6 and mips64r6
architectures. Also prevent non r6 supported tests from running.
Finally, add in support for running the new r6 tests.
(run_dump_test_arch): Add support for mipsr6 tests.
(run_list_test_arch): Add support for using files of the
form arch@testname.l .
include/elf/
* mips.h: Add relocs: R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3,
R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16.
(E_MIPS_ARCH_32R6): New define.
(E_MIPS_ARCH_64R6): New define.
include/opcode/
* mips.h (mips_operand_type): Add new entries: OP_SAME_RS_RT,
OP_CHECK_PREV and OP_NON_ZERO_REG. Add descriptions for the MIPS R6
instruction arguments: -a, -b, -d, -s, -t, -u, -v, -w, -x, -y, -A, -B,
+I, +O, +R, +:, +\, +", +;
(mips_check_prev_operand): New struct.
(INSN2_FORBIDDEN_SLOT): New define.
(INSN_ISA32R6): New define.
(INSN_ISA64R6): New define.
(INSN_UPTO32R6): New define.
(INSN_UPTO64R6): New define.
(mips_isa_table): Add INSN_UPTO32R6 and INSN_UPTO64R6.
(ISA_MIPS32R6): New define.
(ISA_MIPS64R6): New define.
(CPU_MIPS32R6): New define.
(CPU_MIPS64R6): New define.
(cpu_is_member): Add cases for CPU_MIPS32R6, and CPU_MIPS64R6.
ld/
* ldmain.c (get_emulation): Add support for -mips32r6 and -mips64r6.
opcodes/
* mips-dis.c (mips_arch_choices): Add entries for mips32r6 and
mips64r6.
(parse_mips_dis_option): Allow MSA and virtualization support for
mips64r6.
(mips_print_arg_state): Add fields dest_regno and seen_dest.
(mips_seen_register): New function.
(print_insn_arg): Refactored code to use mips_seen_register
function. Add support for OP_SAME_RS_RT, OP_CHECK_PREV and
OP_NON_ZERO_REG. Changed OP_REPEAT_DEST_REG case to print out
the register rather than aborting.
(print_insn_args): Add length argument. Add code to correctly
calculate the instruction address for pc relative instructions.
(validate_insn_args): New static function.
(print_insn_mips): Prevent jalx disassembling for r6. Use
validate_insn_args.
(print_insn_micromips): Use validate_insn_args.
all the arguments are valid.
* mips-formats.h (PREV_CHECK): New define.
* mips-opc.c (decode_mips_operand): Add support for -a, -b, -d, -s,
-t, -u, -v, -w, -x, -y, -A, -B, +I, +O, +R, +:, +\, +", +;
(RD_pc): New define.
(FS): New define.
(I37): New define.
(I69): New define.
(mips_builtin_opcodes): Add MIPS R6 instructions. Exclude recoded
MIPS R6 instructions from MIPS R2 instructions.
Avoid scan of symbols on objects in coff archives since we don't need
to do anything special with common symbols. The scan is quite useless,
and breaks LTO due to slim LTO objects not having symbols available
until after the plugin has claimed them. Instead we can add objects
based on their archive symbol map.
Also, rip out the archive symbol hash table used by the generic
linker. Using a hash breaks one feature of unix archive linking;
The first object file in an archive defining any given symbol should
be the object extracted to satisfy that symbol. What's more a hash
isn't much faster except in pathological cases where object file
ordering causes many scans of the archive. See the comment which I'm
removing from elf_link_add_archive_symbols.
Finally, tidy elflink.c archive handling a little.
PR 13557
* linker.c (struct archive_list, struct archive_hash_entry,
struct archive_hash_table, archive_hash_newfunc,
archive_hash_table_init, archive_hash_lookup, archive_hash_allocate,
archive_hash_table_free): Delete.
(_bfd_generic_link_add_archive_symbols): Add h and name params to
checkfn. Rewrite using a straight-forward scan over archive map.
(generic_link_check_archive_element_no_collect,
generic_link_check_archive_element_collect,
generic_link_check_archive_element): Add h and name params.
* aoutx.h (aout_link_check_archive_element): Likewise.
* pdp11.c (aout_link_check_archive_element): Likewise.
* xcofflink.c (xcoff_link_check_archive_element): Likewise.
* cofflink.c (coff_link_check_archive_element): Likewise. Don't
scan symbols, simply add archive element whenever h is undefined.
(coff_link_check_ar_symbols): Delete.
* ecoff.c (read_ext_syms_and_strs): Delete.
(reread_ext_syms_and_strs): Delete.
(ecoff_link_check_archive_element): Add h and name param. Don't
scan symbols, simply add based on h. Use ecoff_link_add_object_symbols.
* elflink.c (elf_link_is_defined_archive_symbol): Don't test
archive_pass.
(elf_link_add_archive_symbols): Delete "defined" array, merge
functionality into "included". Make "included" a char array. Don't
set or test archive_pass.
* libbfd-in.h (_bfd_generic_link_add_archive_symbols): Update.
* libbfd.h: Regenerate.
* elf32-avr.c: Handle R_AVR_PORT5 and R_AVR_PORT6.
* reloc.c: Add BFD_RELOC_AVR_PORT5 and BFD_RELOC_AVR_PORT6.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* avr.h: Add R_AVR_PORT5 and R_AVR_PORT6.
* config/tc-avr.c (avr_operand): Permit referring to r26-r31 by
name as [xyz][hl]. Permit using a symbol whoes name begins with
`r' to refer to a register.
Allow arbitrary expressions for the P and p operators.
(md_apply_fix): Check the BFD_RELOC_AVR_PORT5 and
BFD_RELOC_AVR_PORT6 relocations.
* archures.c: add avrtiny architecture for avr target.
* bfd-in2.h: Regenerate.
* cpu-avr.c (arch_info_struct): add avrtiny arch info.
* elf32-avr.c (elf_avr_howto_table): new relocation R_AVR_LDS_STS_16
added for 16 bit LDS/STS instruction of avrtiny arch.
(avr_reloc_map): reloc R_AVR_LDS_STS_16 is mapped to
BFD_RELOC_AVR_LDS_STS_16.
(bfd_elf_avr_final_write_processing): select machine number avrtiny arch.
(elf32_avr_object_p): set machine number for avrtiny arch.
* libbfd.h: Regenerate.
* reloc.c: Add documentation for BFD_RELOC_AVR_LDS_STS_16 reloc.
* config/tc-avr.c (mcu_types): Add avrtiny arch.
Add avrtiny arch devices attiny4, attiny5, attiny9, attiny10, attiny20
and attiny40.
(md_show_usage): Add avrtiny arch in usage message.
(avr_operand): validate and issue error for invalid register for avrtiny.
add new reloc exp for 16 bit lds/sts instruction.
(md_apply_fix): check 16 bit lds/sts operand for out of range and encode.
(md_assemble): check ISA for arch and issue diagnostic.
* include/elf/avr.h (E_AVR_MACH_AVRTINY): define avrtiny machine number.
(R_AVR_LDS_STS_16): define 16 bit lds/sts reloc number.
* include/opcode/avr.h (AVR_ISA_TINY): define avrtiny specific ISA.
(AVR_ISA_2xxxa): define ISA without LPM.
(AVR_ISA_AVRTINY): define avrtiny arch ISA.
Add doc for contraint used in 16 bit lds/sts.
Adjust ISA group for icall, ijmp, pop and push.
Add 16 bit lds/sts encoding and update 32 bit lds/sts constraints.
* opcodes/avr-dis.c (avr_operand): Handle constraint j for 16 bit lds/sts.
(print_insn_avr): do not select opcode if insn ISA is avrtiny and machine
is not avrtiny.
* Makefile.am (ALL_EMULATION_SOURCES): add avrtiny emulation source.
(eavrtiny.c): add rules for avrtiny emulation source.
* Makefile.in: Regenerate.
* configure.tgt: Add avrtiny to avr target emulations.
* scripttempl/avrtiny.sc: New file.
linker script template for avrtiny arch.
* emulparams/avrtiny.sh: New file.
emulation parameters for avrtiny arch.
This teaches the DWARF2 find_line functions how to deal with separate
debug relocatable object files. Also fixes a major bug:
When _bfd_dwarf2_slurp_debug_info was split out, place_sections ran
after .debug_info was relocated. This defeated the whole purpose of
place_sections. See the comment I added before place_sections.
Fixes some minor bugs too:
- place_sections didn't set VMA for alloc but non-load sections (bss).
- zero size sections can have symbols, so they need their VMA set too.
- last_vma was incorrectly adjusted.
- my last change to place_sections left VMA unchanged for .debug_info
when the linker has mapped input to output sections, but this is
wrong since bfd_simple_get_relocated_section_contents unmaps debug
sections.
PR 16867
* dwarf2.c: Formatting.
(struct dwarf2_debug): Make adjusted_section_count signed.
(unset_sections): Make i signed.
(set_debug_vma): New function.
(place_sections): Handle separate debug object file. Set VMA
on debug sections, even if they have an output section. Also
set VMA on zero size sections, and non-load but alloc sections.
Set adjusted_section_count to -1 when no section adjustment.
Malloc adjusted_sections. Don't double last_vma. Transfer
alloc section VMAs to separate debug file.
(_bfd_dwarf2_cleanup_debug_info): Free adjusted_sections.
(_bfd_dwarf2_slurp_debug_info): Add do_place parameter. Drop
test on symbols being the same before using old stash. Read
and use separate debug file symbols. Call place_sections.
(find_line): Don't call place_sections here.
* libbfd-in.h (_bfd_dwarf2_slurp_debug_info): Update proto.
* libbfd.h: Regenerate.
* mach-o.c (bfd_mach_o_find_nearest_line): Adjust
_bfd_dwarf2_slurp_debug_info call.
* simple.c (simple_save_output_info): Clarify comment.
This adds support for "func@localentry", an expression that returns the
ELFv2 local entry point address of function "func". I've excluded
dynamic relocation support because that obviously would require glibc
changes.
include/elf/
* ppc64.h (R_PPC64_REL24_NOTOC, R_PPC64_ADDR64_LOCAL): Define.
bfd/
* elf64-ppc.c (ppc64_elf_howto_raw): Add R_PPC64_ADDR64_LOCAL entry.
(ppc64_elf_reloc_type_lookup): Support R_PPC64_ADDR64_LOCAL.
(ppc64_elf_check_relocs): Likewise.
(ppc64_elf_relocate_section): Likewise.
* Add BFD_RELOC_PPC64_ADDR64_LOCAL.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
gas/
* config/tc-ppc.c (ppc_elf_suffix): Support @localentry.
(md_apply_fix): Support R_PPC64_ADDR64_LOCAL.
ld/testsuite/
* ld-powerpc/elfv2-2a.s, ld-powerpc/elfv2-2b.s: New files.
* ld-powerpc/elfv2-2exe.d, ld-powerpc/elfv2-2so.d: New files.
* ld-powerpc/powerpc.exp: Run new test.
elfcpp/
* powerpc.h (R_PPC64_REL24_NOTOC, R_PPC64_ADDR64_LOCAL): Define.
gold/
* powerpc.cc (Target_powerpc::Scan::local, global): Support
R_PPC64_ADDR64_LOCAL.
(Target_powerpc::Relocate::relocate): Likewise.
This changes the behaviour of @h and @ha on PowerPC64 to report errors
on 32-bit overflow. The motivation for this change is that on
PowerPC64, most uses of @h and @ha modifiers and their corresponding
relocations are to build up 32-bit offsets. We'd like to know when
such offsets overflow. Only rarely do people use @h or @ha with the
high 32-bit modifiers to build a 64-bit constant. Those uses will now
need to use two new modifiers, @high and @higha, if the constant isn't
known at assembly time. For now, we won't report overflow at assembly
time..
This also fixes an error when applying some of the HIGHER and HIGHEST
relocations.
include/elf/
* ppc64.h (R_PPC64_ADDR16_HIGH, R_PPC64_ADDR16_HIGHA,
R_PPC64_TPREL16_HIGH, R_PPC64_TPREL16_HIGHA,
R_PPC64_DTPREL16_HIGH, R_PPC64_DTPREL16_HIGHA): New.
(IS_PPC64_TLS_RELOC): Match new tls relocs.
bfd/
* reloc.c (BFD_RELOC_PPC64_ADDR16_HIGH, BFD_RELOC_PPC64_ADDR16_HIGHA,
BFD_RELOC_PPC64_TPREL16_HIGH, BFD_RELOC_PPC64_TPREL16_HIGHA,
BFD_RELOC_PPC64_DTPREL16_HIGH, BFD_RELOC_PPC64_DTPREL16_HIGHA): New.
* elf64-ppc.c (ppc64_elf_howto_raw): Add entries for new relocs.
Make all _HA and _HI relocs report signed overflow.
(ppc64_elf_reloc_type_lookup): Handle new relocs.
(must_be_dyn_reloc, ppc64_elf_check_relocs): Likewise.
(dec_dynrel_count, ppc64_elf_relocate_section): Likewise.
(ppc64_elf_relocate_section): Don't apply 0x8000 adjust to
R_PPC64_TPREL16_HIGHER, R_PPC64_TPREL16_HIGHEST,
R_PPC64_DTPREL16_HIGHER, and R_PPC64_DTPREL16_HIGHEST.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
gas/
* config/tc-ppc.c (SEX16): Don't mask.
(REPORT_OVERFLOW_HI): Define as zero.
(ppc_elf_suffix): Support @high, @higha, @dtprel@high, @dtprel@higha,
@tprel@high, and @tprel@higha modifiers.
(md_assemble): Ignore X_unsigned when applying 16-bit insn fields.
Add (disabled) code to check @h and @ha reloc overflow for powerpc64.
Handle new relocs.
(md_apply_fix): Similarly.
elfcpp/
* powerpc.h (R_PPC64_ADDR16_HIGH, R_PPC64_ADDR16_HIGHA,
R_PPC64_TPREL16_HIGH, R_PPC64_TPREL16_HIGHA,
R_PPC64_DTPREL16_HIGH, R_PPC64_DTPREL16_HIGHA): Define.
gold/
* powerpc.cc (Target_powerpc::Scan::check_non_pic): Handle new relocs.
(Target_powerpc::Scan::global, local): Likewise.
(Target_powerpc::Relocate::relocate): Likewise. Check for overflow
on all ppc64 @h and @ha relocs.
opcodes/
* s390-opc.c (J12_12, J24_24): New macros.
(INSTR_MII_UPI): Rename to INSTR_MII_UPP.
(MASK_MII_UPI): Rename to MASK_MII_UPP.
* s390-opc.txt: Rename MII_UPI to MII_UPP for bprp instruction.
include/elf/
* s390.h: Add new relocs R_390_PC12DBL, R_390_PLT12DBL,
R_390_PC24DBL, and R_390_PLT24DBL.
gas/testsuite/
* gas/s390/zarch-zEC12.s: Change bprp second operand and add
variants requiring relocations.
* gas/s390/zarch-zEC12.d: Likewise.
gas/
* config/tc-s390.c (md_gather_operands, md_apply_fix): Support new
relocs.
bfd/
* elf32-s390.c: Add new relocation definitions R_390_PC12DBL,
R_390_PLT12DBL, R_390_PC24DBL, and R_390_PLT24DBL.
(elf_s390_reloc_type_lookup, elf_s390_check_relocs)
(elf_s390_gc_sweep_hook, elf_s390_relocate_section): Support new
relocations.
* elf64-s390.c: See elf32-s390.c
* bfd-in2.h: Add new relocs to enum bfd_reloc_code_real.
* libbfd.h: Add new reloc strings.
* config.bfd (msp430): Define targ_selvecs.
* configure.in: Add bfd_elf32_msp430_ti_vec.
* cpu-msp430.c: Add some more MSP430 machine numbers.
* elf32-msp430.c Add support for MSP430X relocations.
Add support for TI compiler generated relocations.
Add support for sym_diff relocations.
Add support for relaxing out of range short branches into long
branches.
Add support for MSP430 attribute section.
* reloc.c: Add MSP430X relocations.
* targets.c: Add bfd_elf32_msp430_ti_vec.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* libbfd.h: Regenerate.
* readelf.c: Add support for MSP430X architecture.
* readelf.exp: Expect -wi test to fail for the MSP430.
* config/tc-msp430.c: Add support for the MSP430X architecture.
Add code to insert a NOP instruction after any instruction that
might change the interrupt state.
Add support for the LARGE memory model.
Add code to initialise the .MSP430.attributes section.
* config/tc-msp430.h: Add support for the MSP430X architecture.
* doc/c-msp430.texi: Document the new -mL and -mN command line
options.
* NEWS: Mention support for the MSP430X architecture.
* gas/all/gas.exp: Skip the DIFF1 test for the MSP430.
Expect the FORWARD test to pass for the MSP430.
Skip the REDEF tests for the MSP430.
Expect the 930509A test to fail for the MSP430.
* gas/all/sleb128-4.d: Skip for the MSP430.
* gas/elf/elf.exp: Set target_machine to msp430 for the MSP430.
Skip the EHOPT0 test for the MSP430.
Skip the REDEF and EQU-RELOC tests for the MSP430.
* gas/elf/section2.e-msp430: New file.
* gas/lns/lns-big-delta.d: Remove expectation of 20-bit
addresses.
* gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430.
* gas/msp430/msp430x.s: New test.
* gas/msp430/msp430x.d: Expected disassembly.
* gas/msp430/msp430.exp: Run new test.
* gas/msp430/opcode.d: Update expected disassembly.
* msp430.h: Add MSP430X relocs.
Add some more MSP430 machine numbers.
Add values used by .MSP430.attributes section.
* msp430.h: Add patterns for MSP430X instructions.
* Makefile.am: Add emsp430X.c
* Makefine.in: Regenerate.
* configure.tgt (msp430): Add msp430X emulation.
* ldmain.c (multiple_definition): Only disable relaxation if it
was enabled by the user.
* ldmain.h (RELAXATION_ENABLED_BY_USER): New macro.
* emulparams/msp430all.sh: Add support for MSP430X.
* emultempl/generic.em: (before_parse): Enable relaxation for the
MSP430.
* scripttempl/msp430.sc: Reorganize sections. Add .rodata
section.
* scripttempl/msp430_3.sc: Likewise.
* NEWS: Mention support for MSP430X.
* ld-elf/flags1.d: Expect this test to pass on the MSP430.
* ld-elf/init-fini-arrays.d: Expect this test to fail on the
MSP430.
* ld-elf/merge.d: Expect this test to pass on the MSP430.
* ld-elf/sec64k.exp: Skip these tests for the MSP430.
* ld-gc/pr13683.d: Expect this test to fail on the MSP430.
* ld-srec/srec.exp: Expect these tests to fail on the MSP430.
* ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to
fail on the MSP430.
* msp430-dis.c: Add support for MSP430X instructions.
* metag.h: New file.
* dis-asm.h (print_insn_metag): New declaration.
* metag.h: New file.
* Makefile.am: Add Meta.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.in: Add Meta.
* disassemble.c: Add Meta support.
* metag-dis.c: New file.
* Makefile.am: Add Meta.
* Makefile.in: Regenerate.
* archures.c (bfd_mach_metag): New.
* bfd-in2.h: Regenerate.
* config.bfd: Add Meta.
* configure: Regenerate.
* configure.in: Add Meta.
* cpu-metag.c: New file.
* elf-bfd.h: Add Meta.
* elf32-metag.c: New file.
* elf32-metag.h: New file.
* libbfd.h: Regenerate.
* reloc.c: Add Meta relocations.
* targets.c: Add Meta.
* Makefile.am: Add Meta.
* Makefile.in: Regenerate.
* config/tc-metag.c: New file.
* config/tc-metag.h: New file.
* configure.tgt: Add Meta.
* doc/Makefile.am: Add Meta.
* doc/Makefile.in: Regenerate.
* doc/all.texi: Add Meta.
* doc/as.texiinfo: Document Meta options.
* doc/c-metag.texi: New file.
* gas/metag/labelarithmetic.d: New file.
* gas/metag/labelarithmetic.s: New file.
* gas/metag/metacore12.d: New file.
* gas/metag/metacore12.s: New file.
* gas/metag/metacore21-invalid.l: New file.
* gas/metag/metacore21-invalid.s: New file.
* gas/metag/metacore21.d: New file.
* gas/metag/metacore21.s: New file.
* gas/metag/metacore21ext.d: New file.
* gas/metag/metacore21ext.s: New file.
* gas/metag/metadsp21-invalid.l: New file.
* gas/metag/metadsp21-invalid.s: New file.
* gas/metag/metadsp21.d: New file.
* gas/metag/metadsp21.s: New file.
* gas/metag/metadsp21ext.d: New file.
* gas/metag/metadsp21ext.s: New file.
* gas/metag/metafpu21.d: New file.
* gas/metag/metafpu21.s: New file.
* gas/metag/metafpu21ext.d: New file.
* gas/metag/metafpu21ext.s: New file.
* gas/metag/metag.exp: New file.
* gas/metag/tls.d: New file.
* gas/metag/tls.s: New file.
* Makefile.am: Add Meta.
* Makefile.in: Regenerate.
* configure.tgt: Add Meta.
* emulparams/elf32metag.sh: New file.
* emultempl/metagelf.em: New file.
* ld-elf/merge.d: Mark Meta as xfail.
* ld-gc/start.d: Skip this test on Meta.
* ld-gc/personality.d: Skip this test on Meta.
* ld-metag/external.s: New file.
* ld-metag/metag.exp: New file.
* ld-metag/pcrel.d: New file.
* ld-metag/pcrel.s: New file.
* ld-metag/shared.d: New file.
* ld-metag/shared.r: New file.
* ld-metag/shared.s: New file.
* ld-metag/stub.d: New file.
* ld-metag/stub.s: New file.
* ld-metag/stub_pic_app.d: New file.
* ld-metag/stub_pic_app.r: New file.
* ld-metag/stub_pic_app.s: New file.
* ld-metag/stub_pic_shared.d: New file.
* ld-metag/stub_pic_shared.s: New file.
* ld-metag/stub_shared.d: New file.
* ld-metag/stub_shared.r: New file.
* ld-metag/stub_shared.s: New file.
* binutils/readelf.c: (guess_is_rela): Add EM_METAG.
(dump_relocations): Add EM_METAG.
(get_machine_name): Correct case for Meta.
(is_32bit_abs_reloc): Add support for Meta ADDR32 reloc.
(is_none_reloc): Add support for Meta NONE reloc.
bfd/
* bfd.c (bfd_find_nearest_line_discriminator): New macro.
* coff-rs6000.c: Init _bfd_find_nearest_line_discriminator.
* coff64-rs6000.c: Likewise.
* dwarf2.c (struct line_info): Add discriminator field.
(add_line_info): Fill in new discriminator field.
(decode_line_info): Record discriminator information instead
of ignoring it.
(lookup_address_in_line_info_table): Return discriminator field if
requested.
(comp_unit_find_nearest_line): Add discriminator argument.
(find_line): Likewise.
(_bfd_dwarf2_find_nearest_line): Likewise.
(_bfd_dwarf2_find_line): Likewise.
* elf-bfd.h (_bfd_elf_find_nearest_line_discriminator): New.
(_bfd_elf_find_line_discriminator): Likewise.
(_bfd_generic_find_nearest_line_discriminator): Likewise. Defined.
* elf.c (_bfd_elf_find_nearest_line): Change to a wrapper
that invokes _bfd_elf_find_nearest_line_discriminator with correct
arguments.
(_bfd_elf_find_nearest_line_discriminator): New.
(_bfd_elf_find_line): Change to a wrapper
that invokes _bfd_elf_find_line_discriminator with correct
arguments.
(_bfd_elf_find_line_discriminator): New.
* coffgen.c (coff_find_nearest_line_with_names): Handle
new discriminator argument.
* elf32-arm.c (elf32_arm_find_nearest_line): Likewise.
* elf64-alpha.c (elf64_alpha_find_nearest_line): Likewise.
* elfxx-mips.c (_bfd_mips_elf_find_nearest_line): Likewise.
* mach-o.c (bfd_mach_o_find_nearest_line): Likewise.
* libbfd-in.h (_bfd_dwarf2_find_nearest_line): Add discriminator
argument.
(_bfd_dwarf2_find_line): Likewise.
(_bfd_generic_find_nearest_line_discriminator): New.
* libbfd.c (_bfd_generic_find_nearest_line_discriminator): New.
* bfd-in2.h: Regenerated.
* libbfd.h: Likewise.
* targets.c (BFD_JUMP_TABLE_SYMBOLS): Initialize
_bfd_find_nearest_line_discriminator with
_bfd_generic_find_nearest_line_discriminator.
(bfd_target): Add _bfd_find_nearest_line_discriminator.
binutils/
* addr2line.c (find_address_in_section): Invoke
bfd_find_nearest_line_discriminator to get the discriminator.
(find_offset_in_section): Likewise.
(translate_addresses): Print discriminator if it is non-zero.
* objdump.c (show_line): Invoke
bfd_find_nearest_line_discriminator to get the discriminator,
and keep track of prev_discriminator. Print discriminator
if it is non-zero.
(disassemble_data): Initialize prev_discriminator.
(dump_reloc_set): Invoke bfd_find_nearest_line_discriminator
to get the discriminator, and keep track of last_discriminator.
Print discriminator if it is non-zero.
* elf64-s390.c: Include elf-s390-common.c.
(R_390_IRELATIVE): New reloc.
(elf_s390_reloc_type_lookup): Support R_390_IRELATIVE.
(RELA_ENTRY_SIZE): New macro.
(elf_s390_link_hash_entry): New fields ifunc_resolver_address and
*ifunc_resolver_section.
(struct plt_entry): New struct.
(struct elf_s390_obj_tdata): New field local_plt.
(elf_s390_local_plt): New macro.
(struct elf_s390_link_hash_table): New field irelifunc.
(ELF64): New macro.
(link_hash_newfunc): Initialize new fields.
(elf_s390_check_relocs): Handle IFUNC symbols.
(elf_s390_adjust_dynamic_symbol): Don't do anything for IFUNC
symbols.
(allocate_dynrelocs): Call s390_elf_allocate_ifunc_dyn_relocs for
IFUNC symbols.
(elf_s390_size_dynamic_sections): Handle IFUNC symbols.
(elf_s390_relocate_section): Likewise.
(elf_s390_finish_dynamic_symbol): Likewise.
(elf_s390_finish_dynamic_sections): Handle local IFUNC symbols.
(elf_s390_finish_ifunc_symbol): New function.
(elf_s390_gc_sweep_hook): Handle local plt entries.
(elf_backend_add_symbol_hook): Define.
* elf32-s390.c: See elf64-s390.c changes.
* elf-s390-common.c: New file.
* bfd-in2.h (BFD_RELOC_390_IRELATIVE): New enum field.
* libbfd.h (BFD_RELOC_390_IRELATIVE): New entry for
BFD_RELOC_390_IRELATIVE.
* reloc.c (BFD_RELOC_390_IRELATIVE): Document new relocation.
2012-07-13 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* elf/s390.h (START_RELOC_NUMBERS): Define R_390_IRELATIVE reloc.
2012-07-13 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* emulparams/elf_s390.sh (IREL_IN_PLT): Define.
* emulparams/elf64_s390.sh (IREL_IN_PLT): Define.
* reloc.c: Add new ENUM for BFD_RELOC_AVR_8_LO,
BFD_RELOC_AVR_8_HI, BFD_RELOC_AVR_8_HHI.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenrate.
* elf32-avr.c (elf_avr_howto_table): Add entries for
R_AVR_8_LO8, R_AVR_8_HI8, R_AVR_8_HHI8.
(avr_reloc_map): Add RELOC mappings for R_AVR_8_LO8, R_AVR_8_HI8,
R_AVR_8_HHI8.
* config/tc-avr.c (exp_mod_pm): Remove variable.
(exp_mod_data_t): New typedef.
(pexp_mod_data, exp_mod_data): New variables.
(avr_parse_cons_expression): Scan through exp_mod_data[] to find
data expression modifiers "pm", "gs", "lo8", hi8", "hhi8", "hh8"
and set pexp_mod_data accordingly to be used in avr_cons_fix_new.
(avr_cons_fix_new): Handle new data expression modifiers shipped
in pexp_mod_data.
(md_apply_fix): Handle BFD_RELOC_AVR_8_LO, BFD_RELOC_AVR_8_HI,
BFD_RELOC_AVR_8_HHI.
* elf/avr.h (RELOC_NUMBERS): Add values for R_AVR_8_LO8,
R_AVR_8_HI8, R_AVR_8_HHI8.
* bfd.c (bfd_assert_handler_type): New API type.
(bfd_set_assert_handler, bfd_get_assert_handler): New API functions.
(_bfd_assert_handler): New variable.
(_bfd_default_assert_handler): New function.
(bfd_assert): Call _bfd_assert_handler, not _bfd_error_handler.
* libbfd-in.h (_bfd_assert_handler): Declare.
* libbfd.h, bfd-in2.h: Regenerate.
* archive.c (_bfd_ar_sizepad): New function. Correctly install and
pad the size field in an archive header.
(_bfd_generic_read_ar_hdr_mag): Use the correct type and scan
function for the archive size field.
(bfd_generic_openr_next_archived_file): Likewise.
(do_slurp_coff_armap): Likewise.
(_bfd_write_archive_contents): Likewise.
(_bfd_bsd44_write_ar_hdr): Use the new function.
(bfd_ar_hdr_from_filesystem): Likewise.
(_bfd_write_archive_contents): Likewise.
(bsd_write_armap): Likewise.
(coff_write_armap): Likewise.
* archive64.c (bfd_elf64_archive_write_armap): Likewise.
* bfdio.c (bfd_bread): Use correct type for archive element
sizes.
* ar.c (open_inarch): Likewise.
(extract_file): Likewise.
* libbfd-in.h (struct areltdata): Use correct types for
parsed_size and extra_size fields.
Prototype _bfd_ar_sizepad function.
* libbfd.h: Regenerate.
* dwarf2.c (_bfd_dwarf2_slurp_debug_info): Factor out the part
which reads DWARF2 and stores in stash from find_line.
(find_line) Call _bfd_dwarf2_slurp_debug_info.
* libbfd-in.h (_bfd_dwarf2_slurp_debug_info): Add declaration.
* libbfd.h (_bfd_dwarf2_slurp_debug_info): Regenerate.
* mach-o.c (dsym_subdir): The name of subdir where debug
information may be stored.
(bfd_mach_o_lookup_uuid_command): New. Lookup a load command whose
type is UUID.
(bfd_mach_o_dsym_for_uuid_p): New. Check if the specified BFD is
corresponding to the executable.
(bfd_mach_o_find_dsym): New. Find a debug information BFD in the
specified binary file.
(bfd_mach_o_follow_dsym): New. Find a debug information BFD for
the original BFD.
(bfd_mach_o_find_nearest_line): Check dSYM files for Mach-O
executables, dylibs, and bundles.
(bfd_mach_o_close_and_cleanup): Clean up BFDs for the dSYM file.
* mach-o.h (dsym_bfd): The BFD of the dSYM file.
* dwarf2.c (bfd_dwarf2_cleanup_debug_info): Accept stash as an
argument like other functions to support formats other than ELF.
* elf-bfd.h (bfd_dwarf2_cleanup_debug_info): Move to bfd-in.h.
* elf.c (_bfd_elf_close_and_cleanup): Pass dwarf2_find_line_info
in tdata as a parameter.
* libbfd-in.h (bfd_dwarf2_cleanup_debug_info): Move from
elf-bfd.h.
* libbfd.h (bfd_dwarf2_cleanup_debug_info): Regenerate.
* mach-o-target.c (bfd_mach_o_close_and_cleanup): Remove the
fallback macro.
(bfd_mach_o_find_nearest_line): Likewise.
* mach-o.c (bfd_mach_o_find_nearest_line): Add the definition
which calls _bfd_dwarf2_find_nearest_line.
(bfd_mach_o_close_and_cleanup): Likewise.
* mach-o.h (mach_o_data_struct): Add dwarf2_find_line_info.
(bfd_mach_o_find_nearest_line): Add declaration.
(bfd_mach_o_close_and_cleanup): Add declaration.
* peXXigen.c (_bfd_XXi_final_link_postscripte): Sort pdata in temporary
buffer and use rawsize for sorting.
* coffcode.h (coff_compute_section_file_positions): Set rawsize
before doing alignment.
* tic6x.h (R_C6000_JUMP_SPLOT, R_C6000_EHTYPE,
R_C6000_PCR_H16, R_C6000_PCR_L16): New relocs.
(SHN_TIC6X_SCOMMON): Define.
bfd/
* elf32-tic6x.h (struct elf32_tic6x_params): New.
(elf32_tic6x_setup): Declare.
* elf32-tic6x.c: Include <limits.h>.
(ELF_DYNAMIC_LINKER, DEFAULT_STACK_SIZE, PLT_ENTRY_SIZE): Define.
(struct elf32_tic6x_link_hash_table, struct elf32_link_hash_entry):
New structures.
(elf32_tic6x_link_hash_table, is_tic6x_elf): New macros.
(tic6x_elf_scom_section, tic6x_elf_scom_symbol,
tic6x_elf_scom_symbol_ptr): New static variables.
(elf32_tic6x_howto_table, elf32_tic6x_howto_table_rel,
elf32_tic6x_reloc_map): Add R_C6000_JUMP_SLOT, R_C6000_EHTYPE,
R_C6000_PCR_H16 and R_C6000_PCR_L16.
(elf32_tic6x_link_hash_newfunc, elf32_tic6x_link_hash_table_create,
elf32_tic6x_link_hash_table_free, elf32_tic6x_setup,
elf32_tic6x_using_dsbt, elf32_tic6x_install_rela,
elf32_tic6x_create_dynamic_sections, elf32_tic6x_make_got_dynreloc,
elf32_tic6x_finish_dynamic_symbol, elf32_tic6x_gc_sweep_hook,
elf32_tic6x_adjust_dynamic_symbol): New static functions.
(elf32_tic6x_relocate_section): For R_C6000_PCR_S21, convert branches
to weak symbols as required by the ABI.
Handle GOT and DSBT_INDEX relocs, and copy relocs to the output file
as needed when generating DSBT output.
(elf32_tic6x_check_relocs, elf32_tic6x_add_symbol_hook,
elf32_tic6x_symbol_processing, elf32_tic6x_section_from_bfd_section,
elf32_tic6x_allocate_dynrelocs, elf32_tic6x_size_dynamic_sections,
elf32_tic6x_always_size_sections, elf32_tic6x_modify_program_headers,
elf32_tic6x_finish_dynamic_sections, elf32_tic6x_plt_sym_val,
elf32_tic6x_copy_private_data, elf32_tic6x_link_omit_section_dynsym):
New static functions.
(ELF_MAXPAGESIZE): Define to 0x1000.
(bfd_elf32_bfd_copy_private_bfd_data,
bfd_elf32_bfd_link_hash_table_create,
bfd_elf32_bfd_link_hash_table_free, elf_backend_can_refcount,
elf_backend_want_got_plt, elf_backend_want_dynbss,
elf_backend_plt_readonly, elf_backend_got_header_size,
elf_backend_gc_sweep_hook, elf_backend_modify_program_headers,
elf_backend_create_dynamic_sections, elf_backend_adjust_dynamic_symbol,
elf_backend_check_relocs, elf_backend_add_symbol_hook,
elf_backend_symbol_processing, elf_backend_link_output_symbol_hook,
elf_backend_section_from_bfd_section,
elf_backend_finish_dynamic_symbol, elf_backend_always_size_sections,
elf32_tic6x_size_dynamic_sections, elf_backend_finish_dynamic_sections,
elf_backend_omit_section_dynsym, elf_backend_plt_sym_val): Define.
* bfd/reloc.c (BFD_RELOC_C6000_JUMP_SLOT, BFD_RELOC_C6000_EHTYPE,
BFD_RELOC_C6000_PCR_H16, BFD_RELOC_C6000_PCR_S16): Add.
* bfd/bfd-in2.h: Regenerate.
* bfd/libbfd.h: Regenerate.
* config.bfd: Accept tic6x-*-* instead of tic6x-*-elf.
gas/
* config/tc-tic6x.c (sbss_section, scom_section, scom_symbol): New
static variables.
(md_begin): Initialize them.
(s_tic6x_scomm): New static function.
(md_pseudo_table): Add "scomm".
(tc_gen_reloc): Really undo all adjustments made by
bfd_install_relocation.
* doc/c-tic6x.texi: Document the .scomm directive.
gas/testsuite/
* gas/tic6x/scomm-directive-1.s: New test.
* gas/tic6x/scomm-directive-1.d: New test.
* gas/tic6x/scomm-directive-2.s: New test.
* gas/tic6x/scomm-directive-2.d: New test.
* gas/tic6x/scomm-directive-3.s: New test.
* gas/tic6x/scomm-directive-3.d: New test.
* gas/tic6x/scomm-directive-4.s: New test.
* gas/tic6x/scomm-directive-4.d: New test.
* gas/tic6x/scomm-directive-5.s: New test.
* gas/tic6x/scomm-directive-5.d: New test.
* gas/tic6x/scomm-directive-6.s: New test.
* gas/tic6x/scomm-directive-6.d: New test.
* gas/tic6x/scomm-directive-7.s: New test.
* gas/tic6x/scomm-directive-7.d: New test.
* gas/tic6x/scomm-directive-8.s: New test.
* gas/tic6x/scomm-directive-8.d: New test.
ld/
* emulparams/elf32_tic6x_le.sh (BIG_OUTPUT_FORMAT, EXTRA_EM_FILE,
GENERATE_SHLIB_SCRIPT): New defines.
(TEXT_START_ADDR): Define differently depending on target.
(.got): Redefine to include "*(.dsbt)".
(SDATA_START_SYMBOLS): Remove, replace with
(OTHER_GOT_SYMBOLS): New.
(OTHER_BSS_SECTIONS): Define only for ELF targets.
* emultempl/tic6xdsbt.em: New file.
* gen-doc.texi: Set C6X.
* ld.texinfo: Likewise.
(Options specific to C6X uClinux targets): New section.
binutils/
* readelf.c (get_symbol_index_type): Handle SCOM for TIC6X.
(dump_relocations): Likewise.
binutils/testsuite/
* lib/binutils-common.exp (is_elf_format): Accept tic6x*-*-uclinux*.
ld/testsuite/
* ld-scripts/crossref.exp: Add CFLAGS for tic6x*-*-*.
* ld-elf/sec-to-seg.exp: Remove tic6x from list of targets defining
pagesize to 1.
* ld-tic6x/tic6x.exp: Add support for DSBT shared library/executable
linking tests.
* ld-tic6x/dsbt.ld: New linker script.
* ld-tic6x/dsbt-be.ld: New linker script.
* ld-tic6x/dsbt-overflow.ld: New linker script.
* ld-tic6x/dsbt-inrange.ld: New linker script.
* ld-tic6x/shlib-1.s: New test.
* ld-tic6x/shlib-2.s: New test.
* ld-tic6x/shlib-app-1r.s: New test.
* ld-tic6x/shlib-app-1.s: New test.
* ld-tic6x/shlib-1.sd: New test.
* ld-tic6x/shlib-1.dd: New test.
* ld-tic6x/shlib-app-1.rd: New test.
* ld-tic6x/shlib-app-1rb.rd: New test.
* ld-tic6x/shlib-app-1.sd: New test.
* ld-tic6x/static-app-1rb.od: New test.
* ld-tic6x/shlib-app-1.dd: New test.
* ld-tic6x/shlib-app-1rb.sd: New test.
* ld-tic6x/static-app-1b.od: New test.
* ld-tic6x/static-app-1r.od: New test.
* ld-tic6x/shlib-1rb.rd: New test.
* ld-tic6x/shlib-app-1rb.dd: New test.
* ld-tic6x/shlib-1rb.sd: New test.
* ld-tic6x/shlib-1rb.dd: New test.
* ld-tic6x/shlib-app-1b.od: New test.
* ld-tic6x/tic6x.exp: New test.
* ld-tic6x/static-app-1rb.rd: New test.
* ld-tic6x/shlib-app-1r.od: New test.
* ld-tic6x/static-app-1.od: New test.
* ld-tic6x/static-app-1b.rd: New test.
* ld-tic6x/static-app-1r.rd: New test.
* ld-tic6x/static-app-1rb.sd: New test.
* ld-tic6x/static-app-1b.sd: New test.
* ld-tic6x/static-app-1rb.dd: New test.
* ld-tic6x/static-app-1r.sd: New test.
* ld-tic6x/static-app-1b.dd: New test.
* ld-tic6x/shlib-1b.rd: New test.
* ld-tic6x/static-app-1r.dd: New test.
* ld-tic6x/shlib-app-1b.rd: New test.
* ld-tic6x/shlib-1r.rd: New test.
* ld-tic6x/shlib-app-1r.rd: New test.
* ld-tic6x/shlib-1b.sd: New test.
* ld-tic6x/static-app-1.rd: New test.
* ld-tic6x/shlib-app-1b.sd: New test.
* ld-tic6x/shlib-1r.sd: New test.
* ld-tic6x/shlib-1b.dd: New test.
* ld-tic6x/shlib-app-1r.sd: New test.
* ld-tic6x/shlib-app-1b.dd: New test.
* ld-tic6x/shlib-1r.dd: New test.
* ld-tic6x/static-app-1.sd: New test.
* ld-tic6x/shlib-app-1r.dd: New test.
* ld-tic6x/static-app-1.dd: New test.
* ld-tic6x/shlib-noindex.rd: New test.
* ld-tic6x/shlib-noindex.dd: New test.
* ld-tic6x/shlib-noindex.sd: New test.
* ld-tic6x/got-reloc-local-1.s: New test.
* ld-tic6x/got-reloc-local-2.s: New test.
* ld-tic6x/got-reloc-local-r.d: New test.
* ld-tic6x/got-reloc-global.s: New test.
* ld-tic6x/got-reloc-global-addend-1.d: New test.
* ld-tic6x/got-reloc-global-addend-1.s: New test.
* ld-tic6x/got-reloc-global-addend-2.d: New test.
* ld-tic6x/got-reloc-inrange.d: New test.
* ld-tic6x/got-reloc-overflow.d: New test.
* ld-tic6x/got-reloc-global-addend-2.s: New test.
* ld-tic6x/dsbt-index-error.d: New test.
* ld-tic6x/dsbt-index.d: New test.
* ld-tic6x/dsbt-index.s: New test.
* ld-tic6x/shlib-app-1.od: New test.
* ld-tic6x/shlib-app-1rb.od: New test.
* ld-tic6x/shlib-1.rd: New test.
* ld-tic6x/weak.d: New test.
* ld-tic6x/weak-be.d: New test.
* ld-tic6x/weak.s: New test.
* ld-tic6x/weak-data.d: New test.
* ld-tic6x/common.d: New test.
* ld-tic6x/common.ld: New test.
* ld-tic6x/common.s: New test.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
* elf32-rx.c: Add it to the list, corresponding to R_RX_OPneg.
* config/tc-rx.c (tc_gen_reloc): Emit an RX_OP_NEG expression
instead of an RH_NEG32 one.
PR corefile/8210
bfd/
* bfd-in2.h: Regenerate.
* corefile.c (bfd_core_file_pid): New.
* targets.c (BFD_JUMP_TABLE_CORE): Add NAME##_core_file_pid.
(struct bfd_target) <_core_file_pid>: New.
* libbfd-in.h (_bfd_nocore_core_file_pid): Declare.
* libbfd.c (_bfd_nocore_core_file_pid): New.
* elf-bfd.h (bfd_elf32_core_file_pid, bfd_elf64_core_file_pid):
Declare.
* elfcode.h (elf_core_file_pid): New define.
* elfcore.h (elf_core_file_pid): New function.
* elf.c (elfcore_make_pid): Rewrite.
(elfcore_grok_prstatus): Only set core_pid if not set yet.
(elfcore_grok_prstatus) [!HAVE_PRSTATUS_T_PR_WHO]: Fallback to
getting the lwpid from prstat.pr_pid.
* elf64-x86-64.c (elf64_x86_64_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
(elf64_x86_64_grok_psinfo): Extract the the main process's PID,
and store it in elf_tdata's core_pid field.
* elf32-i386.c (elf_i386_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
(elf_i386_grok_psinfo): Extract the the main process's PID, and
store it in elf_tdata's core_pid field.
* elf32-am33lin.c (elf32_am33lin_grok_prstatus): Write the LWPID
to elf_tdata's core_lwpid instead of to core_pid.
* elf32-arm.c (elf32_arm_nabi_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf32-cris.c (cris_elf_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf32-frv.c (elf32_frv_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf32-hppa.c (elf32_hppa_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf32-mips.c (elf32_mips_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf32-ppc.c (ppc_elf_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf32-s390.c (elf_s390_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf32-score.c (s3_bfd_score_elf_grok_prstatus): Write the LWPID
to elf_tdata's core_lwpid instead of to core_pid.
* elf32-score7.c (s7_bfd_score_elf_grok_prstatus): Write the LWPID
to elf_tdata's core_lwpid instead of to core_pid.
* elf32-sh.c (elf32_shlin_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf32-xtensa.c (elf_xtensa_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf64-hppa.c (elf64_hppa_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf64-mips.c (elf64_mips_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf64-ppc.c (ppc64_elf_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elfn32-mips.c (elf32_mips_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* plugin.c (bfd_plugin_core_file_pid): New function.
* aout-target.h (MY_core_file_pid): Define.
* aout-tic30.c (MY_core_file_pid, MY_core_file_p): New defines.
* coff-rs6000.c (coff_core_file_pid): New define.
(rs6000coff_vec, pmac_xcoff_vec): Use BFD_JUMP_TABLE_CORE.
* coff64-rs6000.c (coff_core_file_pid): New define.
(rs6000coff64_vec): Use BFD_JUMP_TABLE_CORE.
(xcoff64_core_file_pid): New define.
(aix5coff64_vec): Use BFD_JUMP_TABLE_CORE.
* mach-o-target.c (bfd_mach_o_core_file_pid): New define.
* aix386-core.c (aix386_core_file_pid): New define.
* hppabsd-core.c (hppabsd_core_core_file_pid): New define.
* hpux-core.c (hpux_core_core_file_pid): New define.
* irix-core.c (irix_core_core_file_pid): New define.
* lynx-core.c (lynx_core_file_pid): New define.
* osf-core.c (osf_core_core_file_pid): New define.
* ptrace-core.c (ptrace_unix_core_file_pid): New define.
* sco5-core.c (sco5_core_file_pid): New define.
* xcoff-target.h (coff_core_file_pid): New define.
* netbsd-core.c (netbsd_core_core_file_pid): New define.
gdb/
2010-08-18 Pedro Alves <pedro@codesourcery.com>
PR corefile/8210
gdb/
* corelow.c (add_to_thread_list): Don't use
gdbarch_core_reg_section_encodes_pid. Use bfd_core_file_pid.
(get_core_register_section): Don't use
gdbarch_core_reg_section_encodes_pid.
* gdbarch.sh (core_reg_section_encodes_pid): Delete.
* gdbarch.h, gdbarch.c: Regenerate.
* amd64-sol2-tdep.c (amd64_sol2_init_abi): Don't set
gdbarch_core_reg_section_encodes_pid.
* i386-sol2-tdep.c (i386_sol2_init_abi): Ditto.
* sparc-sol2-tdep.c (sparc32_sol2_init_abi): Ditto.
* sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Ditto.
* vms-lib.c (credat_lo, credat_hi): New fields.
(vms_read_block): Adjust comments.
(vms_write_block): New function.
(_bfd_vms_lib_archive_p): Decode majorid once. Replace some
hard-coded values with constants. Set credat_lo and credat_hi.
(_bfd_vms_lib_mkarchive): Add argument kind.
Set ver, mhd_size and type according to kind.
(_bfd_vms_lib_alpha_mkarchive): New function.
(struct lib_index): Renamed from struct vms_index
(lib_index_cmp): Renamed from vms_index_cmp. Adjusted.
(get_idxlen): Type of idx argument adjusted. Add is_elfidx
argument and handle it.
(vms_write_index): Adjust argument idx. Handle elf indexes.
(_bfd_vms_lib_build_map): Adjust type of arguments modules and res.
(_bfd_vms_lib_write_archive_contents): Add is_elfidx variable and
use it. Handle elf indexes. Set credat.
* libbfd-in.h (_bfd_vms_lib_mkarchive): Renamed to ...
(_bfd_vms_lib_alpha_mkarchive): ... this.
* libbfd.h: Regenerated.
* vms-alpha.c (vms_alpha_vec): Adjust after previous renaming.
* elf32-xtensa.c (elf_xtensa_relocate_section): Add a large amount
of code to change the bits in the instructions to match the changes
in the relocations. Declare dest_addr and sym_sec to help.
Joseph Myers <joseph@codesourcery.com>
Andrew Stubbs <ams@codesourcery.com>
bfd/
* config.bfd (sh-*-uclinux* | sh[12]-*-uclinux*): Add
bfd_elf32_shl_vec, and FDPIC vectors to targ_selvecs.
* configure.in: Handle FDPIC vectors.
* elf32-sh-relocs.h: Add FDPIC and movi20 relocations.
* elf32-sh.c (DEFAULT_STACK_SIZE): Define.
(SYMBOL_FUNCDESC_LOCAL): Define. Use it instead of
SYMBOL_REFERENCES_LOCAL for function descriptors.
(fdpic_object_p): New.
(sh_reloc_map): Add FDPIC and movi20 relocations.
(sh_elf_info_to_howto, sh_elf_relocate_section): Handle new invalid
range.
(struct elf_sh_plt_info): Add got20 and short_plt. Update all
definitions.
(FDPIC_PLT_ENTRY_SIZE, FDPIC_PLT_LAZY_OFFSET): Define.
(fdpic_sh_plt_entry_be, fdpic_sh_plt_entry_le, fdpic_sh_plts): New.
(FDPIC_SH2A_PLT_ENTRY_SIZE, FDPIC_SH2A_PLT_LAZY_OFFSET): Define.
(fdpic_sh2a_plt_entry_be, fdpic_sh2a_plt_entry_le)
(fdpic_sh2a_short_plt_be, fdpic_sh2a_short_plt_le, fdpic_sh2a_plts):
New.
(get_plt_info): Handle FDPIC.
(MAX_SHORT_PLT): Define.
(get_plt_index, get_plt_offset): Handle short_plt.
(union gotref): New.
(struct elf_sh_link_hash_entry): Add funcdesc, rename tls_type to
got_type and adjust all uses. Add GOT_FUNCDESC.
(struct sh_elf_obj_tdata): Add local_funcdesc. Rename
local_got_tls_type to local_got_type.
(sh_elf_local_got_type): Renamed from sh_elf_local_got_tls_type. All
users changed.
(sh_elf_local_funcdesc): Define.
(struct elf_sh_link_hash_table): Add sfuncdesc, srelfuncdesc, fdpic_p,
and srofixup.
(sh_elf_link_hash_newfunc): Initialize new fields.
(sh_elf_link_hash_table_create): Set fdpic_p.
(sh_elf_omit_section_dynsym): New.
(create_got_section): Create .got.funcdesc, .rela.got.funcdesc
and .rofixup.
(allocate_dynrelocs): Allocate local function descriptors and space
for R_SH_FUNCDESC-related relocations, and for rofixups.
Handle GOT_FUNCDESC. Create fixups. Handle GOT entries which
require function descriptors.
(sh_elf_always_size_sections): Handle PT_GNU_STACK and __stacksize.
(sh_elf_modify_program_headers): New.
(sh_elf_size_dynamic_sections): Allocate function descriptors for
local symbols. Allocate .got.funcdesc contents. Allocate rofixups.
Handle local GOT entries of type GOT_FUNCDESC. Create fixups for
local GOT entries. Ensure that FDPIC libraries always have a PLTGOT
entry in the .dynamic section.
(sh_elf_add_dyn_reloc, sh_elf_got_offset, sh_elf_initialize_funcdesc)
(sh_elf_add_rofixup, sh_elf_osec_to_segment)
(sh_elf_osec_readonly_p, install_movi20_field): New functions.
(sh_elf_relocate_section): Handle new relocations, R_SH_FUNCDESC,
R_SH_GOTFUNCDESC and R_SH_GOTOFFFUNCDESC. Use sh_elf_got_offset
and .got.plt throughout to find _GLOBAL_OFFSET_TABLE_. Add rofixup
read-only section warnings. Handle undefined weak symbols. Generate
fixups for R_SH_DIR32 and GOT entries. Check for cross-segment
relocations and clear EF_SH_PIC. Handle 20-bit relocations.
Always generate R_SH_DIR32 for FDPIC instead of R_SH_RELATIVE.
(sh_elf_gc_sweep_hook): Handle R_SH_FUNCDESC, R_SH_GOTOFF20,
R_SH_GOTFUNCDESC, R_SH_GOTFUNCDESC20, and R_SH_GOTOFFFUNCDESC.
Handle 20-bit relocations.
(sh_elf_copy_indirect_symbol): Copy function descriptor reference
counts.
(sh_elf_check_relocs): Handle new relocations. Make symbols
dynamic for FDPIC relocs. Account for rofixups. Error for FDPIC
symbol mismatches. Allocate a GOT for R_SH_DIR32. Allocate fixups
for R_SH_DIR32.
(sh_elf_copy_private_data): Copy PT_GNU_STACK size.
(sh_elf_merge_private_data): Copy initial flags. Do not clobber
non-mach flags. Set EF_SH_PIC for FDPIC. Reject FDPIC mismatches.
(sh_elf_finish_dynamic_symbol): Do not handle got_funcdesc entries
here. Rename sgot to sgotplt and srel to srelplt. Handle short_plt,
FDPIC descriptors, and got20. Create R_SH_FUNCDESC_VALUE for FDPIC.
Use install_movi20_field. Rename srel to srelgot. Always generate
R_SH_DIR32 for FDPIC instead of R_SH_RELATIVE.
(sh_elf_finish_dynamic_sections): Fill in the GOT pointer in rofixup.
Do not fill in reserved GOT entries for FDPIC. Correct DT_PLTGOT.
Rename sgot to sgotplt. Assert that the right number of rofixups
and dynamic relocations were allocated.
(sh_elf_use_relative_eh_frame, sh_elf_encode_eh_address): New.
(elf_backend_omit_section_dynsym): Use sh_elf_omit_section_dynsym.
(elf_backend_can_make_relative_eh_frame)
(elf_backend_can_make_lsda_relative_eh_frame)
(elf_backend_encode_eh_address): Define.
(TARGET_BIG_SYM, TARGET_BIG_NAME, TARGET_LITTLE_SYM)
(TARGET_LITTLE_NAME, elf_backend_modify_program_headers, elf32_bed):
Redefine for FDPIC vector.
* reloc.c: Add SH FDPIC and movi20 relocations.
* targets.c (_bfd_target_vector): Add FDPIC vectors.
* configure, bfd-in2.h, libbfd.h: Regenerated.
binutils/
* readelf.c (get_machine_flags): Handle EF_SH_PIC and EF_SH_FDPIC.
gas/
* config/tc-sh.c (sh_fdpic): New.
(sh_check_fixup): Handle relocations on movi20.
(parse_exp): Do not reject PIC operators here.
(build_Mytes): Check for unhandled PIC operators here. Use
sh_check_fixup for movi20.
(enum options): Add OPTION_FDPIC.
(md_longopts, md_parse_option, md_show_usage): Add --fdpic.
(sh_fix_adjustable, md_apply_fix): Handle FDPIC and movi20 relocations.
(sh_elf_final_processing): Handle --fdpic.
(sh_uclinux_target_format): New.
(sh_parse_name): Handle FDPIC relocation operators.
* config/tc-sh.h (TARGET_FORMAT): Define specially for TE_UCLINUX.
(sh_uclinux_target_format): Declare for TE_UCLINUX.
* configure.tgt (sh-*-uclinux* | sh[12]-*-uclinux*): Set
em=uclinux.
* doc/c-sh.texi (SH Options): Document --fdpic.
gas/testsuite/
* gas/sh/basic.exp: Run new tests. Handle uClinux like Linux.
* gas/sh/fdpic.d: New file.
* gas/sh/fdpic.s: New file.
* gas/sh/reg-prefix.d: Force big-endian.
* gas/sh/sh2a-pic.d: New file.
* gas/sh/sh2a-pic.s: New file.
* lib/gas-defs.exp (is_elf_format): Include sh*-*-uclinux*.
include/elf/
* sh.h (EF_SH_PIC, EF_SH_FDPIC): Define.
(R_SH_FIRST_INVALID_RELOC_6, R_SH_LAST_INVALID_RELOC_6): New. Adjust
other invalid ranges.
(R_SH_GOT20, R_SH_GOTOFF20, R_SH_GOTFUNCDESC, R_SH_GOTFUNCDESC20)
(R_SH_GOTOFFFUNCDESC, R_SH_GOTOFFFUNCDESC20, R_SH_FUNCDESC)
(R_SH_FUNCDESC_VALUE): New.
ld/
* Makefile.am (ALL_EMULATIONS): Add eshelf_fd.o and eshlelf_fd.o.
(eshelf_fd.c, eshlelf_fd.c): New rules.
* Makefile.in: Regenerate.
* configure.tgt (sh-*-uclinux*): Add shelf_fd and shlelf_fd
emulations.
* emulparams/shelf_fd.sh: New file.
* emulparams/shlelf_fd.sh: New file.
* emulparams/shlelf_linux.sh: Update comment.
ld/testsuite/
* ld-sh/sh.exp: Handle uClinux like Linux.
* lib/ld-lib.exp (is_elf_format): Include sh*-*-uclinux*.
* ld-sh/fdpic-funcdesc-shared.d: New file.
* ld-sh/fdpic-funcdesc-shared.s: New file.
* ld-sh/fdpic-funcdesc-static.d: New file.
* ld-sh/fdpic-funcdesc-static.s: New file.
* ld-sh/fdpic-gotfuncdesc-shared.d: New file.
* ld-sh/fdpic-gotfuncdesc-shared.s: New file.
* ld-sh/fdpic-gotfuncdesc-static.d: New file.
* ld-sh/fdpic-gotfuncdesc-static.s: New file.
* ld-sh/fdpic-gotfuncdesci20-shared.d: New file.
* ld-sh/fdpic-gotfuncdesci20-shared.s: New file.
* ld-sh/fdpic-gotfuncdesci20-static.d: New file.
* ld-sh/fdpic-gotfuncdesci20-static.s: New file.
* ld-sh/fdpic-goti20-shared.d: New file.
* ld-sh/fdpic-goti20-shared.s: New file.
* ld-sh/fdpic-goti20-static.d: New file.
* ld-sh/fdpic-goti20-static.s: New file.
* ld-sh/fdpic-gotofffuncdesc-shared.d: New file.
* ld-sh/fdpic-gotofffuncdesc-shared.s: New file.
* ld-sh/fdpic-gotofffuncdesc-static.d: New file.
* ld-sh/fdpic-gotofffuncdesc-static.s: New file.
* ld-sh/fdpic-gotofffuncdesci20-shared.d: New file.
* ld-sh/fdpic-gotofffuncdesci20-shared.s: New file.
* ld-sh/fdpic-gotofffuncdesci20-static.d: New file.
* ld-sh/fdpic-gotofffuncdesci20-static.s: New file.
* ld-sh/fdpic-gotoffi20-shared.d: New file.
* ld-sh/fdpic-gotoffi20-shared.s: New file.
* ld-sh/fdpic-gotoffi20-static.d: New file.
* ld-sh/fdpic-gotoffi20-static.s: New file.
* ld-sh/fdpic-plt-be.d: New file.
* ld-sh/fdpic-plt-le.d: New file.
* ld-sh/fdpic-plt.s: New file.
* ld-sh/fdpic-plti20-be.d: New file.
* ld-sh/fdpic-plti20-le.d: New file.
* ld-sh/fdpic-stack-default.d: New file.
* ld-sh/fdpic-stack-size.d: New file.
* ld-sh/fdpic-stack.s: New file.
* vms-lib.c (_bfd_vms_lib_ia64_archive_p): New function.
* libbfd-in.h (_bfd_vms_lib_ia64_archive_p): Add prototype.
* libbfd.h: Regenerate.
* configure.in (havevecs): Define HAVE_all_vecs when
--enable-targets=all is set. Use AC_SUBST on it.
(tdefaults): Do not add havevecs.
(bfd_elf64_ia64_vms_vec): Add vms-lib.lo and vms-misc.lo
* configure: Regenerate.
* Makefile.am (HAVEVECS): New variable.
(INCLUDES): Add HAVEVECS.
* Makefile.in: Regenerate.
* elfxx-ia64.c (INCLUDE_IA64_VMS): New macro, defined if vms
target is selected. Add #ifdef/#endif around vms specific code.
(bfd_elfNN_archive_p, bfd_elfNN_archive_slurp_armap,
bfd_elfNN_archive_slurp_extended_name_table,
bfd_elfNN_archive_construct_extended_name_table,
bfd_elfNN_archive_truncate_arname,
bfd_elfNN_archive_write_armap,
bfd_elfNN_archive_read_ar_hdr,
bfd_elfNN_archive_write_ar_hdr,
bfd_elfNN_archive_openr_next_archived_file,
bfd_elfNN_archive_get_elt_at_index,
bfd_elfNN_archive_generic_stat_arch_elt,
bfd_elfNN_archive_update_armap_timestamp): Define to use vms archives.
* vms.h: Include time.h. Add prototypes for vms_get_module_name,
vms_time_to_time_t and vms_rawtime_to_time_t.
* vms.c (vms_alpha_vec): Add archives support.
* vms-misc.c: Include safe-ctype.h
(vms_get_module_name): New function.
(vms_time_to_time_t, vms_rawtime_to_time_t): Ditto.
* vms-hdr.c (_bfd_vms_write_hdr): Put module name creation to the
vms_get_module_name function. Use this function.
* targets.c: Declare vms_lib_txt_vec. Add it to _bfd_target_vector.
* libbfd-in.h: Add prototype for _bfd_append_relative_path.
Add prototypes for vms-lib.c
* libbfd.h: Regenerate.
* configure.in (TDEFINES): Add an entry for vms_lib_txt_vec. Add
vms-lib.lo to vms_alpha_vec.
* config.bfd (targ_cpu): Add targ_selvecs for alpha*-*-*vms*.
* configure: Regenerate.
* bfd.c: Add selective_search field.
* bfd-in2.h: Regenerate.
* archive.c (append_relative_path): Rename to
_bfd_append_relative_path and make it public.
(_bfd_get_elt_at_filepos): Adjust for above renaming.
* Makefile.am (BFD32_BACKENDS): Add vms-lib.lo
(BFD32_BACKENDS_CFILES): Add vms-lib.c
* Makefile.in: Regenerate.
* elf/sparc.h (R_SPARC_JMP_IREL, R_SPARC_IRELATIVE): Define.
bfd/
* reloc.c (BFD_RELOC_SPARC_JMP_IREL): New.
(BFD_RELOC_SPARC_IRELATIVE): Likewise.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elfxx-sparc.h (_bfd_sparc_elf_link_hash_table): Add loc_hash_table
and loc_hash_memory.
(_bfd_sparc_elf_link_hash_table_free): Declare.
* elf32-sparc.c (elf32_sparc_add_symbol_hook): New.
(elf_backend_add_symbol_hook, elf_backend_post_process_headers,
bfd_elf32_bfd_link_hash_table_free): Define.
* elf64-sparc.c (elf64_sparc_add_symbol_hook): Set
has_ifunc_symbols if STT_GNU_IFUNC.
(bfd_elf64_bfd_link_hash_table_free): Define.
(elf_backend_post_process_headers): Define always.
* elfxx-sparc.c (sparc_jmp_irel_howto, sparc_irelative_howto): New.
(sparc_reloc_map): Add entries for new IFUNC relocs.
(_bfd_sparc_elf_reloc_type_lookup): Handle new IFUNC relocs.
(_bfd_sparc_elf_info_to_howto_ptr): Likewise.
(elf_sparc_local_htab_hash, elf_sparc_local_htab_eq,
elf_sparc_get_local_sym_hash): New.
(_bfd_sparc_elf_create_dynamic_sections): Move PLT ops initialization
from here...
(_bfd_sparc_elf_link_hash_table_create): ... to here. Allocate
local hash table.
(_bfd_sparc_elf_link_hash_table_free): New.
(create_ifunc_sections): New.
(_bfd_sparc_elf_check_relocs): Unconditionally assign htab->elf.dynobj
and call create_ifunc_sections(). For local STT_GNU_IFUNC symbols
cons up a fake local hash table entry for it. Unconditionally add
a PLT refcount for STT_GNU_IFUNC symbols when h->def_regular. Count
dyn relocs for ifunc.
(_bfd_sparc_elf_adjust_dynamic_symbol): Handle ifunc.
(allocate_dynrelocs): Unconditionally emit a PLT entry when STT_GNU_IFUNC
and h->def_regular. Count GOT dyn relocs for ifunc.
(allocate_local_dynrelocs): New function.
(_bfd_sparc_elf_size_dynamic_sections): Invoke it over the local hash table.
Emit dynamic relocs to irelplt when not shared. Treat iplt like splt.
(_bfd_sparc_elf_relocate_section): Handle ifunc relocations by hand.
(_bfd_sparc_elf_finish_dynamic_symbol): Adjust for non-dynamic ifunc plt
in iplt/irelplt.
ld/testsuite/
* ld-ifunc/ifunc.exp: Run for sparc.
* reloc.c: Add BFD_RELOC_MACH_O_SECTDIFF and BFD_RELOC_MACH_O_PAIR.
* bfd-in2.h: Regenerated.
* libbfd.h: Regenerated.
* mach-o.c (FILE_ALIGN): New macro.
(bfd_mach_o_canonicalize_symtab): Adjust for bfd_mach_o_asymbol.
(bfd_mach_o_print_symbol): Ditto.
(bfd_mach_o_scan_write_thread): Adjust type of variable offset.
(bfd_mach_o_get_reloc_upper_bound): New function.
(bfd_mach_o_canonicalize_reloc): Ditto.
(bfd_mach_o_scan_write_relocs): Ditto.
(bfd_mach_o_scan_write_section_32): Remove offset argument.
(bfd_mach_o_scan_write_section_64): Ditto.
(bfd_mach_o_scan_write_segment_32): Write relocs. Fix size of data
written for load command. Do not compute section file offset.
(bfd_mach_o_scan_write_segment_64): Ditto.
(bfd_mach_o_scan_write_symtab): Compute file offset first.
Adjust for bfd_mach_o_asymbol. Move code to convert from BFD to
Mach-O to ...
(bfd_mach_o_mangle_symbols): ... this new function.
(bfd_mach_o_write_contents): Be sure to habe load commands built.
Call bfd_mach_o_mangle_symbols.
(bfd_mach_o_build_commands): Adjust for filelen field.
Use FILE_ALIGN macro. Clear section file offset if section is empty.
Do not set symtab file offset anymore here.
(bfd_mach_o_make_empty_symbol): Allocate a bfd_mach_o_asymbol.
(bfd_mach_o_make_bfd_section): Set SEC_RELOC if has reloc.
Set reloc_count and rel_filepos section fields.
(bfd_mach_o_scan_read_section_32): Type of argument offset is now
unsigned int.
(bfd_mach_o_scan_read_section_64): Ditto.
(bfd_mach_o_scan_read_section): Ditto.
(bfd_mach_o_scan_read_symtab_symbol): Typr of argument s is now
bfd_mach_o_asymbol. Use unsigned int for file offset type.
(bfd_mach_o_scan_read_symtab_symbol): Adjust for bfd_mach_o_asymbol.
Handle weak-ref symbols.
(bfd_mach_o_scan_read_symtab_symbols): Adjust for bfd_mach_o_asymbol.
(bfd_mach_o_scan_read_dysymtab_symbol): Ditto.
(bfd_mach_o_scan): Remove assignment to removed field.
(bfd_mach_o_mkobject_init): Ditto.
(bfd_mach_o_bfd_print_private_bfd_data): Adjust printf formatter.
(bfd_mach_o_bfd_reloc_type_lookup): New macro.
(bfd_mach_o_bfd_reloc_name_lookup): Ditto.
(bfd_mach_o_swap_reloc_in): Ditto.
(bfd_mach_o_swap_reloc_out): Ditto.
* mach-o.h (BFD_MACH_O_REFERENCE_FLAG_UNDEFINED_NON_LAZY)
(BFD_MACH_O_REFERENCE_FLAG_UNDEFINED_LAZY)
(BFD_MACH_O_REFERENCE_FLAG_DEFINED)
(BFD_MACH_O_REFERENCE_FLAG_PRIVATE_DEFINED)
(BFD_MACH_O_REFERENCE_FLAG_PRIVATE_UNDEFINED_NON_LAZY)
(BFD_MACH_O_REFERENCE_FLAG_PRIVATE_UNDEFINED_LAZY)
(BFD_MACH_O_REFERENCED_DYNAMICALLY, BFD_MACH_O_N_DESC_DISCARDED)
(BFD_MACH_O_N_NO_DEAD_STRIP, BFD_MACH_O_N_WEAK_REF)
(BFD_MACH_O_N_WEAK_DEF): New macros.
Add comments.
(bfd_mach_o_section_type): Add new enumeration values.
(BFD_MACH_O_S_SELF_MODIFYING_CODE)
(BFD_MACH_O_S_ATTR_LIVE_SUPPORT)
(BFD_MACH_O_S_ATTR_NO_DEAD_STRIP)
(BFD_MACH_O_S_ATTR_STRIP_STATIC_SYMS, BFD_MACH_O_S_ATTR_NO_TOC): New
macros.
(BFD_MACH_O_GENERIC_RELOC_VANILLA)
(BFD_MACH_O_GENERIC_RELOC_PAIR)
(BFD_MACH_O_GENERIC_RELOC_SECTDIFF)
(BFD_MACH_O_GENERIC_RELOC_PB_LA_PTR)
(BFD_MACH_O_GENERIC_RELOC_LOCAL_SECTDIFF): Ditto.
(BFD_MACH_O_RELENT_SIZE): Ditto.
(BFD_MACH_O_R_PCREL, BFD_MACH_O_GET_R_LENGTH)
(BFD_MACH_O_R_EXTERN, BFD_MACH_O_GET_R_TYPE)
(BFD_MACH_O_GET_R_SYMBOLNUM, BFD_MACH_O_SET_R_LENGTH)
(BFD_MACH_O_SET_R_TYPE, BFD_MACH_O_SET_R_SYMBOLNUM): Ditto.
(BFD_MACH_O_SR_SCATTERED, BFD_MACH_O_SR_PCREL)
(BFD_MACH_O_GET_SR_LENGTH, BFD_MACH_O_GET_SR_TYPE)
(BFD_MACH_O_GET_SR_ADDRESS, BFD_MACH_O_SET_SR_LENGTH)
(BFD_MACH_O_SET_SR_TYPE, BFD_MACH_O_SET_SR_ADDRESS): Ditto.
(bfd_mach_o_reloc_info): New struct.
(bfd_mach_o_asymbol): New struct.
(bfd_mach_o_symtab_command): The symbols field is now of type
bfd_mach_o_asymbol.
(bfd_mach_o_load_command): The offset and len fields are now of type
unsigned int.
(mach_o_data_struct): Remove symbols, nsymbols and ibfd fields.
Add a filelen field. Add comments.
(bfd_mach_o_backend_data): New struct.
(bfd_mach_o_get_backend_data): New macro.
(bfd_mach_o_scan_read_symtab_symbol): Parameter symbol now of type
bfd_mach_o_asymbol.
(bfd_mach_o_scan_read_dysymtab_symbol): Ditto.
(bfd_mach_o_get_reloc_upper_bound): New prototype.
(bfd_mach_o_canonicalize_reloc): Ditto.
* mach-o-target.c (bfd_mach_o_bfd_is_local_label_name): Remove
duplicated macro. Now defined to _bfd_generic_is_local_label.
(TARGET_NAME_BACKEND): New macro...
(TARGET_NAME_BACKEND): ... used to name a new variable.
(TARGET_NAME): Define relocs table using bfd_mach_o, reference
Mach-O backend data.
* mach-o-i386.c (i386_howto_table): New variable.
(bfd_mach_o_i386_swap_reloc_in): New function.
(bfd_mach_o_i386_swap_reloc_out): Ditto.
(bfd_mach_o_i386_bfd_reloc_type_lookup): Ditto.
(bfd_mach_o_i386_bfd_reloc_name_lookup): Ditto.
(bfd_mach_o_swap_reloc_in, bfd_mach_o_swap_reloc_out): New macros.
(bfd_mach_o_bfd_reloc_type_lookup)
(bfd_mach_o_bfd_reloc_name_lookup): Ditto.
* ppc.h (R_PPC_TLSGD, R_PPC_TLSLD): Add new relocs.
* ppc64.h (R_PPC64_TLSGD, R_PPC64_TLSLD): Add new relocs.
bfd/
* reloc.c (BFD_RELOC_PPC_TLSGD, BFD_RELOC_PPC_TLSLD): New.
* section.c (struct bfd_section): Add has_tls_get_addr_call.
(BFD_FAKE_SECTION): Init new flag.
* ecoff.c (bfd_debug_section): Likewise.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elf32-ppc.c (ppc_elf_howto_raw): Add R_PPC_TLSGD and R_PPC_TLSLD.
(ppc_elf_reloc_type_lookup): Handle new relocs.
(ppc_elf_check_relocs): Set has_tls_get_addr_call on finding such
without marker relocs.
(ppc_elf_tls_optimize): Allow out-of-order __tls_get_addr relocs
if section has no old-style calls.
(ppc_elf_relocate_section): Set tls_mask for non-tls relocs too.
Don't try to optimize new-style __tls_get_addr call when handling
arg setup relocs. Instead do so for R_PPC_TLSGD and R_PPC_TLSLD
relocs.
* elf64-ppc.c (ppc64_elf_howto_raw): Add R_PPC64_TLSGD, R_PPC64_TLSLD.
(ppc64_elf_reloc_type_lookup): Handle new relocs.
(ppc64_elf_check_relocs): Set has_tls_get_addr_call on finding such
without marker relocs.
(ppc64_elf_tls_optimize): Allow out-of-order __tls_get_addr relocs
if section has no old-style calls. Set toc_ref for new relocs as
appropriate.
(ppc64_elf_relocate_section): Set tls_mask for non-tls relocs too.
Don't try to optimize new-style __tls_get_addr call when handling
arg setup relocs. Instead do so for R_PPC_TLSGD and R_PPC_TLSLD
relocs.
gas/
* config/tc-ppc.c (ppc_elf_suffix): Error if ppc32 tls got relocs
have non-zero addend.
(md_assemble): Parse args of __tls_get_addr calls.
(md_apply_fix): Handle BFD_RELOC_PPC_TLSGD and BFD_RELOC_PPC_TLSLD.
ld/testsuite/
* ld-powerpc/tlsmark.s, * ld-powerpc/tlsmark.d: New test.
* ld-powerpc/tlsmark32.s, * ld-powerpc/tlsmark32.d: New test.
* ld-powerpc/powerpc.exp: Run them.
* elf32-cr16.c (R_CR16_GOT_REGREL20, R_CR16_GOTC_REGREL20 and
R_CR16_GLOB_DAT): New macros
(cr16_elf_howto_table): Add entries for for R_CR16_GOT_REGREL20,
R_CR16_GOTC_REGREL20 and R_CR16_GLOB_DAT.
(cr16_reloc_map): Ditto
(_bfd_cr16_elf_create_got_section): New function to create GOT section.
(_bfd_cr16_elf_create_dynamic_sections): New function to create dynamic
section.
(_bfd_cr16_elf_adjust_dynamic_symbol): New function to adjust symbol
defined by dynamic object.
(_bfd_cr16_elf_size_dynamic_sections): New function to find the size
of dynamic section.
(_bfd_cr16_elf_finish_dynamic_symbol): New function to handle dynamic
symbols.
(_bfd_cr16_elf_finish_dynamic_symbol): New function to handle dynamic
sections.
(bfd_cr16_elf32_create_embedded_relocs): New function to create
embedded relocs in .emreloc section in memory for .data.rel section.
(_bfd_cr16_elf_reloc_type_class): New function for classify reloc types.
(cr16_elf_check_relocs): New function for checking reloc types in
first phase.
(cr16_elf_final_link_relocate): Update for handling the new reloc
types R_CR16_GOT_REGREL20 and R_CR16_GOTC_REGREL20.
(elf32_cr16_relax_section): Update relax implementation.
* reloc.c (bfd_reloc_code_type): Add entries for R_CR16_GOT_REGREL20,
R_CR16_GOTC_REGREL20 and R_CR16_GLOB_DAT.
* bfd-in.h (bfd_boolean bfd_cr16_elf32_create_embedded_relocs): Declared
* libbfd.h, bfd-in2.h: Regenerate.
* reloc.c (BFD_RELOC_MIPS16_GOT16, BFD_RELOC_MIPS16_CALL16): Declare.
* libbfd.h, bfd-in2.h: Regenerate.
* elf32-mips.c (elf_mips16_howto_table_rel): Fill in reserved
R_MIPS16_GOT16 and R_MIPS16_CALL16 entries.
(mips16_reloc_map): Add mappings.
* elf64-mips.c (mips16_elf64_howto_table_rel): Fill in reserved
R_MIPS16_GOT16 and R_MIPS16_CALL16 entries.
(mips16_elf64_howto_table_rela): Likewise.
(mips16_reloc_map): Add mappings.
* elfn32-mips.c (elf_mips16_howto_table_rel): Fill in reserved
R_MIPS16_GOT16 and R_MIPS16_CALL16 entries.
(elf_mips16_howto_table_rela): Likewise.
(mips16_reloc_map): Add mappings.
* elfxx-mips.c (mips_elf_create_shadow_symbol): New function.
(section_allows_mips16_refs_p): Likewise.
(mips16_stub_symndx): Likewise.
(mips_elf_check_mips16_stubs): Treat the data argument as a
bfd_link_info. Mark every dynamic symbol as needing MIPS16 stubs
and create a "shadow" symbol for the original MIPS16 definition.
(mips16_reloc_p, got16_reloc_p, call16_reloc_p, hi16_reloc_p)
(lo16_reloc_p, mips16_call_reloc_p): New functions.
(_bfd_mips16_elf_reloc_unshuffle): Use mips16_reloc_p to generalize
relocation checks.
(_bfd_mips16_elf_reloc_shuffle): Likewise.
(_bfd_mips_elf_lo16_reloc): Handle R_MIPS16_GOT16.
(mips_elf_got16_entry): Add comment.
(mips_elf_calculate_relocation): Use hi16_reloc_p,
lo16_reloc_p, mips16_call_reloc_p, call16_reloc_p and got16_reloc_p
to generalize relocation checks. Use section_allows_mips16_refs_p
instead of mips16_stub_section_p. Handle R_MIPS16_CALL16 and
R_MIPS16_GOT16, allowing the former to refer directly to a
MIPS16 function if its stub is not needed.
(mips16_stub_section_p): Delete.
(_bfd_mips_elf_symbol_processing): Convert odd-valued function
symbols into even MIPS16 symbols.
(mips_elf_add_lo16_rel_addend): Use mips16_reloc_p to generalize
a relocation check.
(_bfd_mips_elf_check_relocs): Calculate "bed" and "rel_end"
earlier in the function. Use mips16_stub_symndx to identify
the target function. Avoid out-of-bounds accesses when the
stub has no relocations; report an error instead. Use
section_allows_mips16_refs_p instead of mips16_stub_section_p.
Use mips16_call_reloc_p and got16_reloc_p to generalize relocation
checks. Handle R_MIPS16_CALL16 and R_MIPS16_GOT16. Don't create
dynamic relocations for absolute references to __gnu_local_gp.
(_bfd_mips_elf_always_size_sections): Pass a bfd_link_info as
the argument to mips_elf_check_mips16_stubs. Generalize comment.
(_bfd_mips_elf_relocate_section): Use hi16_reloc_p and got16_reloc_p
to generalize relocation checks.
(_bfd_mips_elf_finish_dynamic_symbol): If a dynamic MIPS16 function
symbol has a non-MIPS16 stub, redirect the symbol to the stub.
Fix an overly long line. Don't give dynamic symbols type STO_MIPS16.
(_bfd_mips_elf_gc_sweep_hook): Handle R_MIPS16_CALL16 and
R_MIPS16_GOT16.
gas/
* config/tc-mips.c (mips16_reloc_p, got16_reloc_p, hi16_reloc_p)
(lo16_reloc_p): New functions.
(reloc_needs_lo_p): Use hi16_reloc_p and got16_reloc_p to
generalize relocation checks.
(matching_lo_reloc): New function.
(fixup_has_matching_lo_p): Use it.
(mips16_mark_labels): Don't clobber a symbol's visibility.
(append_insn): Use hi16_reloc_p and lo16_reloc_p.
(mips16_ip): Handle BFD_RELOC_MIPS16_GOT16 and BFD_RELOC_MIPS16_CALL16.
(md_apply_fix): Likewise.
(mips16_percent_op): Add %got and %call16.
(mips_frob_file): Use got16_reloc_p to generalize relocation checks.
Use matching_lo_reloc.
(mips_force_relocation): Use hi16_reloc_p and lo16_reloc_p to
generalize relocation checks.
(mips_fix_adjustable): Use lo16_reloc_p to generalize relocation
checks.
gas/testsuite/
* gas/mips/elf-rel8-mips16.d, gas/mips/elf-rel8-mips16.s,
* gas/mips/elf-rel9-mips16.d, gas/mips/elf-rel9-mips16.s,
* gas/mips/elf-rel13-mips16.d, gas/mips/elf-rel13-mips16.s: New tests.
* gas/mips/mips.exp: Run them.
ld/testsuite/
* ld-mips-elf/mips16-local-stubs-1.d: Remove stub_for_h3,
which was only referenced by the .pdr section, and was not
actually needed by code.
* ld-mips-elf/mips16-intermix.d: Remove unused static function stubs.
* ld-mips-elf/mips16-pic-1a.s,
ld-mips-elf/mips16-pic-1b.s,
ld-mips-elf/mips16-pic-1-dummy.s,
ld-mips-elf/mips16-pic-1.dd,
ld-mips-elf/mips16-pic-1.gd,
ld-mips-elf/mips16-pic-1.inc,
ld-mips-elf/mips16-pic-1.ld,
ld-mips-elf/mips16-pic-2a.s,
ld-mips-elf/mips16-pic-2b.s,
ld-mips-elf/mips16-pic-2.ad,
ld-mips-elf/mips16-pic-2.dd,
ld-mips-elf/mips16-pic-2.gd,
ld-mips-elf/mips16-pic-2.nd,
ld-mips-elf/mips16-pic-2.rd: New tests.
* ld-mips-elf/mips-elf.exp: Run them.
* bfd/archive.c (_bfd_find_nested_archive): New function.
(get_extended_arelt_filename): Add origin parameter.
(_bfd_generic_read_ar_hdr_mag): Deal with extended name
combined with a file offset.
(append_relative_path): New function.
(_bfd_get_elt_at_filepos): Deal with external members and
nested archives.
(bfd_generic_openr_next_archived_file): Thin archives.
(bfd_generic_archive_p): Recognize new magic string.
(adjust_relative_path): New function.
(_bfd_construct_extended_name_table): Construct extended
names for thin archive members.
(_bfd_write_archive_contents): Emit new magic string, skip
copying files for thin archives.
* bfd/bfd-in.h (bfd_is_thin_archive): New macro.
* bfd/bfd.c (struct bfd): New fields for thin archives.
* bfd/libbfd-in.h (struct areltdata): New field for thin archives.
* bfd/opncls.c (bfd_close): Delete BFDs for nested archives.
* binutils/ar.c (make_thin_archive): New global flag.
(map_over_members): Deal with full pathnames in thin archives.
(usage, main): Add 'T' option for building thin archives.
(replace_members): Pass thin archive flag to ar_emul_append.
* binutils/arsup.c (ar_open): Initialize new flag.
* binutils/binemul.c (ar_emul_append): Add new parameter for
flattening nested archives.
(do_ar_emul_default_append): New function.
(ar_emul_default_append): Factored out recursive code.
* binutils/binemul.h (ar_emul_default_append): Add new parameter.
(struct bin_emulation_xfer_struct): New parameter for ar_append.
* binutils/dlltool.c (gen_lib_file): Initialize thin archive flag.
* binutils/emul_aix.c (ar_emul_aix_internal): Add new flatten
parameter, currently unimplemented.
All callers changed.
* binutils/objcopy.c (copy_archive): Preserve thin archive flag.
* binutils/doc/binutils.texi: Update ar documentation.
* binutils/testsuite/binutils-all/ar.exp: Add thin archive tests.
* include/aout/ar.h (ARMAGT): New magic string for thin archives.
* libbfd.c (bfd_realloc_or_free): New function. Performs like
bfd_realloc, but if the (re)allocation fails, the pointer is
freed.
* libbfd-in.h: Prototype.
* libbfd.h: Regenerate.
* bfdio.c (bfd_bwrite): Use the new function.
(bfd_seek): Likewise.
* bfdwin.c:(bfd_get_file_window): Likewise.
* elf-strtab.c (_bfd_elf_strtab_add): Likewise.
* elf32-ppc.c (ppc_elf_relax_section): Likewise.
* elf32-xtensa.c (vsprintf_msg): Likewise.
* mach-o.c (bfd_mach_o_core_fetch_environment): Likewise.
* stabs.c (_bfd_link_seciton_stabs): Likewise.
* vms-misc.c (_bfd_vms_get_record): Likewise.
* vms-tir.c (check_section): Likewise.
* vms.c (vms_new_section_hook): Likewise.
* elf32-arm.c (elf32_arm_section_map_add): Check that the
allocation of sec_data->map succeeded before using it.
* elflink.c (elf_link_output_sym): Do not overwrite finfo->
symshndxbuf until it is known that the reallocation succeeded.
* reloc.c (BFD_RELOC_MN10300_ALIGN): Add.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elf-m10300.h: Handle R_MN10300_ALIGN relocs.
* mn10300_elf_relax_delete_bytes): Honour R_MN10300_ALIGN relocs.
Re-fix off by one error in comparisons.
* config/tc-mn10300.c (tc_gen_reloc): Fix test that decides when
sym_diff relocs should be generated.
(md_apply_fix): Skip R_MN10300_ALIGN relocs.
(mn10300_fix_adjustable): Do not adjust R_MN10300_ALIGN relocs.
(mn10300_handle_align): New function. Generate R_MN10300_ALIGN
relocs to record alignment requests.
* config/tc-mn10300.h (TC_FORCE_RELOCATION_SUB_SAME): Also force
R_MN10300_ALIGN relocs.
(HANDLE_ALIGN): Define. Call mn10300_handle_align.
* gas/all/gas.exp: Do not run diff1.s test for mn10300.
* ld-mn10300/mn10300.exp: Run new tests. Skip i126256 test if
a compiler is not available.
* ld-mn10300/i112045-3.s: New test.
* ld-mn10300/i112045-3.d: Expected disassembly.
* ld-mn10300/i135409.s: Rename to i135409-1.s.
* ld-mn10300/i135409.d: Rename to i135409-1.d
* ld-mn10300/i135409-2.s: New test.
* ld-mn10300/i135409-2.d: Expected symbol table.
* ld-mn10300/i36434.d: Adjust expected disassembly.
* linker.c (bfd_section_already_linked_table_insert): Change
return type from void to boolean. Return FALSE on failure.
(_bfd_generic_section_already_linked): Test return value of
bfd_section_already_linked_table_insert, call fatal on error.
* elflink.c (_bfd_elf_section_already_linked): Test return value
of bfd_section_already_linked_table_insert, call fatal on error.
* libbfd-in.h (bfd_section_already_linked_table_insert): Update
return type to bfd_boolean.
* libbfd.h: Regenerate.
* spu.h (R_SPU_PPU32, R_SPU_PPU64): Define.
bfd/
* reloc.c (BFD_RELOC_SPU_PPU32, BFD_RELOC_SPU_PPU64): Define.
* elf-bfd.h (struct elf_backend_data): Change return type of
elf_backend_relocate_section to int.
* elf32-spu.c (elf_howto_table): Add howtos for R_SPU_PPU32 and
R_SPU_PPU64.
(spu_elf_bfd_to_reloc_type): Convert new relocs.
(spu_elf_count_relocs): New function.
(elf_backend_count_relocs): Define.
(spu_elf_relocate_section): Arrange to emit R_SPU_PPU32 and
R_SPU_PPU64 relocs.
* elflink.c (elf_link_input_bfd): Emit relocs if relocate_section
returns 2.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
gas/
* config/tc-spu.c (md_pseudo_table): Add int, long, quad. Call
spu_cons for word.
(md_assemble): Tidy use of insn.flag.
(get_imm): Likewise. Handle uppercase input too.
(spu_cons): New function.
* config/tc-spu.h (tc_fix_adjustable): Don't adjust SPU_PPU relocs.
(TC_FORCE_RELOCATION): Don't resolve them either.
binutils/
* embedspu.sh (find_prog): Prefer prog in same dir as embedspu
over one found on the users path.
(main): Generate .reloc for each R_SPU_PPU* reloc.