qemu-e2k/Makefile.target

435 lines
12 KiB
Makefile
Raw Normal View History

# -*- Mode: makefile -*-
GENERATED_HEADERS = config-target.h
CONFIG_NO_PCI = $(if $(subst n,,$(CONFIG_PCI)),n,y)
CONFIG_NO_KVM = $(if $(subst n,,$(CONFIG_KVM)),n,y)
CONFIG_NO_XEN = $(if $(subst n,,$(CONFIG_XEN)),n,y)
include ../config-host.mak
include config-devices.mak
include config-target.mak
include $(SRC_PATH)/rules.mak
ifneq ($(HWDIR),)
include $(HWDIR)/config.mak
endif
TARGET_PATH=$(SRC_PATH)/target-$(TARGET_BASE_ARCH)
$(call set-vpath, $(SRC_PATH):$(TARGET_PATH):$(SRC_PATH)/hw)
ifdef CONFIG_LINUX
QEMU_CFLAGS += -I../linux-headers
endif
QEMU_CFLAGS += -I.. -I$(TARGET_PATH) -DNEED_CPU_H
include $(SRC_PATH)/Makefile.objs
ifdef CONFIG_USER_ONLY
# user emulator name
QEMU_PROG=qemu-$(TARGET_ARCH2)
else
# system emulator name
QEMU_PROG=qemu-system-$(TARGET_ARCH2)$(EXESUF)
endif
PROGS=$(QEMU_PROG)
STPFILES=
ifndef CONFIG_HAIKU
LIBS+=-lm
endif
config-target.h: config-target.h-timestamp
config-target.h-timestamp: config-target.mak
ifdef CONFIG_TRACE_SYSTEMTAP
stap: $(QEMU_PROG).stp
ifdef CONFIG_USER_ONLY
TARGET_TYPE=user
else
TARGET_TYPE=system
endif
$(QEMU_PROG).stp:
$(call quiet-command,sh $(SRC_PATH)/scripts/tracetool \
--$(TRACE_BACKEND) \
--binary $(bindir)/$(QEMU_PROG) \
--target-arch $(TARGET_ARCH) \
--target-type $(TARGET_TYPE) \
--stap < $(SRC_PATH)/trace-events > $(QEMU_PROG).stp," GEN $(QEMU_PROG).stp")
else
stap:
endif
all: $(PROGS) stap
# Dummy command so that make thinks it has done something
@true
#########################################################
# cpu emulator library
libobj-y = exec.o translate-all.o cpu-exec.o translate.o
libobj-y += tcg/tcg.o tcg/optimize.o
libobj-y += fpu/softfloat.o
libobj-y += op_helper.o helper.o
ifeq ($(TARGET_BASE_ARCH), i386)
libobj-y += cpuid.o
endif
libobj-$(CONFIG_NEED_MMU) += mmu.o
libobj-$(TARGET_ARM) += neon_helper.o iwmmxt_helper.o
libobj-y += disas.o
$(libobj-y): $(GENERATED_HEADERS)
# libqemu
translate.o: translate.c cpu.h
translate-all.o: translate-all.c cpu.h
tcg/tcg.o: cpu.h
# HELPER_CFLAGS is used for all the code compiled with static register
# variables
op_helper.o user-exec.o: QEMU_CFLAGS += $(HELPER_CFLAGS)
# Note: this is a workaround. The real fix is to avoid compiling
# cpu_signal_handler() in user-exec.c.
signal.o: QEMU_CFLAGS += $(HELPER_CFLAGS)
#########################################################
# Linux user emulator target
ifdef CONFIG_LINUX_USER
$(call set-vpath, $(SRC_PATH)/linux-user:$(SRC_PATH)/linux-user/$(TARGET_ABI_DIR))
QEMU_CFLAGS+=-I$(SRC_PATH)/linux-user/$(TARGET_ABI_DIR) -I$(SRC_PATH)/linux-user
obj-y = main.o syscall.o strace.o mmap.o signal.o thunk.o \
elfload.o linuxload.o uaccess.o gdbstub.o cpu-uname.o \
user-exec.o $(oslib-obj-y)
obj-$(TARGET_HAS_BFLT) += flatload.o
obj-$(TARGET_I386) += vm86.o
obj-i386-y += ioport-user.o
nwfpe-obj-y = fpa11.o fpa11_cpdo.o fpa11_cpdt.o fpa11_cprt.o fpopcode.o
nwfpe-obj-y += single_cpdo.o double_cpdo.o extended_cpdo.o
obj-arm-y += $(addprefix nwfpe/, $(nwfpe-obj-y))
obj-arm-y += arm-semi.o
obj-m68k-y += m68k-sim.o m68k-semi.o
$(obj-y) $(obj-$(TARGET_BASE_ARCH)-y): $(GENERATED_HEADERS)
obj-y += $(addprefix ../libuser/, $(user-obj-y))
obj-y += $(addprefix ../libdis-user/, $(libdis-y))
obj-y += $(libobj-y)
endif #CONFIG_LINUX_USER
#########################################################
# Darwin user emulator target
ifdef CONFIG_DARWIN_USER
$(call set-vpath, $(SRC_PATH)/darwin-user)
QEMU_CFLAGS+=-I$(SRC_PATH)/darwin-user -I$(SRC_PATH)/darwin-user/$(TARGET_ARCH)
# Leave some space for the regular program loading zone
LDFLAGS+=-Wl,-segaddr,__STD_PROG_ZONE,0x1000 -image_base 0x0e000000
LIBS+=-lmx
obj-y = main.o commpage.o machload.o mmap.o signal.o syscall.o thunk.o \
gdbstub.o user-exec.o
obj-i386-y += ioport-user.o
$(obj-y) $(obj-$(TARGET_BASE_ARCH)-y): $(GENERATED_HEADERS)
obj-y += $(addprefix ../libuser/, $(user-obj-y))
obj-y += $(addprefix ../libdis-user/, $(libdis-y))
obj-y += $(libobj-y)
endif #CONFIG_DARWIN_USER
#########################################################
# BSD user emulator target
ifdef CONFIG_BSD_USER
$(call set-vpath, $(SRC_PATH)/bsd-user)
QEMU_CFLAGS+=-I$(SRC_PATH)/bsd-user -I$(SRC_PATH)/bsd-user/$(TARGET_ARCH)
obj-y = main.o bsdload.o elfload.o mmap.o signal.o strace.o syscall.o \
gdbstub.o uaccess.o user-exec.o
obj-i386-y += ioport-user.o
$(obj-y) $(obj-$(TARGET_BASE_ARCH)-y): $(GENERATED_HEADERS)
obj-y += $(addprefix ../libuser/, $(user-obj-y))
obj-y += $(addprefix ../libdis-user/, $(libdis-y))
obj-y += $(libobj-y)
endif #CONFIG_BSD_USER
#########################################################
# System emulator target
ifdef CONFIG_SOFTMMU
obj-y = arch_init.o cpus.o monitor.o machine.o gdbstub.o balloon.o
# virtio has to be here due to weird dependency between PCI and virtio-net.
# need to fix this properly
obj-$(CONFIG_NO_PCI) += pci-stub.o
obj-$(CONFIG_VIRTIO) += virtio.o virtio-blk.o virtio-balloon.o virtio-net.o virtio-serial-bus.o
obj-y += vhost_net.o
obj-$(CONFIG_VHOST_NET) += vhost.o
obj-$(CONFIG_REALLY_VIRTFS) += 9pfs/virtio-9p-device.o
obj-$(CONFIG_KVM) += kvm.o kvm-all.o
obj-$(CONFIG_NO_KVM) += kvm-stub.o
obj-y += memory.o
LIBS+=-lz
QEMU_CFLAGS += $(VNC_TLS_CFLAGS)
QEMU_CFLAGS += $(VNC_SASL_CFLAGS)
QEMU_CFLAGS += $(VNC_JPEG_CFLAGS)
QEMU_CFLAGS += $(VNC_PNG_CFLAGS)
QEMU_CFLAGS += $(GLIB_CFLAGS)
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
# xen support
obj-$(CONFIG_XEN) += xen-all.o xen_machine_pv.o xen_domainbuild.o xen-mapcache.o
obj-$(CONFIG_NO_XEN) += xen-stub.o
obj-i386-$(CONFIG_XEN) += xen_platform.o
# Inter-VM PCI shared memory
CONFIG_IVSHMEM =
ifeq ($(CONFIG_KVM), y)
ifeq ($(CONFIG_PCI), y)
CONFIG_IVSHMEM = y
endif
endif
obj-$(CONFIG_IVSHMEM) += ivshmem.o
# Hardware support
obj-i386-y += vga.o
obj-i386-y += mc146818rtc.o i8259.o pc.o
obj-i386-y += cirrus_vga.o sga.o apic.o ioapic.o piix_pci.o
obj-i386-y += vmport.o
obj-i386-y += device-hotplug.o pci-hotplug.o smbios.o wdt_ib700.o
obj-i386-y += debugcon.o multiboot.o
obj-i386-y += pc_piix.o
obj-i386-$(CONFIG_KVM) += kvmclock.o
obj-i386-$(CONFIG_SPICE) += qxl.o qxl-logger.o qxl-render.o
# shared objects
obj-ppc-y = ppc.o
obj-ppc-y += vga.o
# PREP target
obj-ppc-y += i8259.o mc146818rtc.o
obj-ppc-y += ppc_prep.o
# OldWorld PowerMac
obj-ppc-y += ppc_oldworld.o
# NewWorld PowerMac
obj-ppc-y += ppc_newworld.o
# IBM pSeries (sPAPR)
ifeq ($(CONFIG_FDT)$(TARGET_PPC64),yy)
obj-ppc-y += spapr.o spapr_hcall.o spapr_rtas.o spapr_vio.o
obj-ppc-y += xics.o spapr_vty.o spapr_llan.o spapr_vscsi.o
endif
# PowerPC 4xx boards
obj-ppc-y += ppc4xx_devs.o ppc4xx_pci.o ppc405_uc.o ppc405_boards.o
obj-ppc-y += ppc440.o ppc440_bamboo.o
# PowerPC E500 boards
obj-ppc-y += ppce500_mpc8544ds.o mpc8544_guts.o
# PowerPC 440 Xilinx ML507 reference board.
obj-ppc-y += virtex_ml507.o
obj-ppc-$(CONFIG_KVM) += kvm_ppc.o
obj-ppc-$(CONFIG_FDT) += device_tree.o
# Xilinx PPC peripherals
obj-ppc-y += xilinx_intc.o
obj-ppc-y += xilinx_timer.o
obj-ppc-y += xilinx_uartlite.o
obj-ppc-y += xilinx_ethlite.o
# LM32 boards
obj-lm32-y += lm32_boards.o
obj-lm32-y += milkymist.o
# LM32 peripherals
obj-lm32-y += lm32_pic.o
obj-lm32-y += lm32_juart.o
obj-lm32-y += lm32_timer.o
obj-lm32-y += lm32_uart.o
obj-lm32-y += lm32_sys.o
obj-lm32-y += milkymist-ac97.o
obj-lm32-y += milkymist-hpdmc.o
obj-lm32-y += milkymist-memcard.o
obj-lm32-y += milkymist-minimac2.o
obj-lm32-y += milkymist-pfpu.o
obj-lm32-y += milkymist-softusb.o
obj-lm32-y += milkymist-sysctl.o
obj-lm32-$(CONFIG_OPENGL) += milkymist-tmu2.o
obj-lm32-y += milkymist-uart.o
obj-lm32-y += milkymist-vgafb.o
obj-lm32-y += framebuffer.o
obj-mips-y = mips_r4k.o mips_jazz.o mips_malta.o mips_mipssim.o
obj-mips-y += mips_addr.o mips_timer.o mips_int.o
obj-mips-y += vga.o i8259.o
obj-mips-y += jazz_led.o
obj-mips-y += gt64xxx.o mc146818rtc.o
obj-mips-y += cirrus_vga.o
obj-mips-$(CONFIG_FULONG) += bonito.o vt82c686.o mips_fulong2e.o
obj-microblaze-y = petalogix_s3adsp1800_mmu.o
obj-microblaze-y += petalogix_ml605_mmu.o
obj-microblaze-y += microblaze_pic_cpu.o
obj-microblaze-y += xilinx_intc.o
obj-microblaze-y += xilinx_timer.o
obj-microblaze-y += xilinx_uartlite.o
obj-microblaze-y += xilinx_ethlite.o
obj-microblaze-y += xilinx_axidma.o
obj-microblaze-y += xilinx_axienet.o
obj-microblaze-$(CONFIG_FDT) += device_tree.o
# Boards
obj-cris-y = cris_pic_cpu.o
obj-cris-y += cris-boot.o
obj-cris-y += axis_dev88.o
# IO blocks
obj-cris-y += etraxfs_dma.o
obj-cris-y += etraxfs_pic.o
obj-cris-y += etraxfs_eth.o
obj-cris-y += etraxfs_timer.o
obj-cris-y += etraxfs_ser.o
ifeq ($(TARGET_ARCH), sparc64)
obj-sparc-y = sun4u.o apb_pci.o
obj-sparc-y += vga.o
obj-sparc-y += mc146818rtc.o
obj-sparc-y += cirrus_vga.o
else
obj-sparc-y = sun4m.o lance.o tcx.o sun4m_iommu.o slavio_intctl.o
obj-sparc-y += slavio_timer.o slavio_misc.o sparc32_dma.o
obj-sparc-y += cs4231.o eccmemctl.o sbi.o sun4c_intctl.o leon3.o
# GRLIB
obj-sparc-y += grlib_gptimer.o grlib_irqmp.o grlib_apbuart.o
endif
obj-arm-y = integratorcp.o versatilepb.o arm_pic.o arm_timer.o
obj-arm-y += arm_boot.o pl011.o pl031.o pl050.o pl080.o pl110.o pl181.o pl190.o
obj-arm-y += versatile_pci.o
obj-arm-y += realview_gic.o realview.o arm_sysctl.o arm11mpcore.o a9mpcore.o
obj-arm-y += armv7m.o armv7m_nvic.o stellaris.o pl022.o stellaris_enet.o
obj-arm-y += pl061.o
obj-arm-y += arm-semi.o
obj-arm-y += pxa2xx.o pxa2xx_pic.o pxa2xx_gpio.o pxa2xx_timer.o pxa2xx_dma.o
obj-arm-y += pxa2xx_lcd.o pxa2xx_mmci.o pxa2xx_pcmcia.o pxa2xx_keypad.o
obj-arm-y += gumstix.o
obj-arm-y += zaurus.o ide/microdrive.o spitz.o tosa.o tc6393xb.o
obj-arm-y += omap1.o omap_lcdc.o omap_dma.o omap_clk.o omap_mmc.o omap_i2c.o \
omap_gpio.o omap_intc.o omap_uart.o
obj-arm-y += omap2.o omap_dss.o soc_dma.o omap_gptimer.o omap_synctimer.o \
omap_gpmc.o omap_sdrc.o omap_spi.o omap_tap.o omap_l4.o
obj-arm-y += omap_sx1.o palm.o tsc210x.o
obj-arm-y += nseries.o blizzard.o onenand.o vga.o cbus.o tusb6010.o usb-musb.o
obj-arm-y += mst_fpga.o mainstone.o
obj-arm-y += z2.o
obj-arm-y += musicpal.o bitbang_i2c.o marvell_88w8618_audio.o
obj-arm-y += framebuffer.o
obj-arm-y += syborg.o syborg_fb.o syborg_interrupt.o syborg_keyboard.o
obj-arm-y += syborg_serial.o syborg_timer.o syborg_pointer.o syborg_rtc.o
obj-arm-y += syborg_virtio.o
obj-arm-y += vexpress.o
obj-arm-y += strongarm.o
obj-arm-y += collie.o
obj-sh4-y = shix.o r2d.o sh7750.o sh7750_regnames.o tc58128.o
obj-sh4-y += sh_timer.o sh_serial.o sh_intc.o sh_pci.o sm501.o
obj-sh4-y += ide/mmio.o
obj-m68k-y = an5206.o mcf5206.o mcf_uart.o mcf_intc.o mcf5208.o mcf_fec.o
obj-m68k-y += m68k-semi.o dummy_m68k.o
obj-s390x-y = s390-virtio-bus.o s390-virtio.o
obj-alpha-y = i8259.o mc146818rtc.o
obj-alpha-y += vga.o cirrus_vga.o
obj-xtensa-y += xtensa_pic.o
obj-xtensa-y += xtensa_sample.o
obj-xtensa-y += xtensa_dc232b.o
obj-xtensa-y += xtensa-semi.o
main.o: QEMU_CFLAGS+=$(GPROF_CFLAGS)
monitor.o: hmp-commands.h qmp-commands.h
$(obj-y) $(obj-$(TARGET_BASE_ARCH)-y): $(GENERATED_HEADERS)
obj-y += $(addprefix ../, $(common-obj-y))
obj-y += $(addprefix ../libdis/, $(libdis-y))
obj-y += $(libobj-y)
obj-y += $(addprefix $(HWDIR)/, $(hw-obj-y))
obj-y += $(addprefix ../, $(trace-obj-y))
endif # CONFIG_SOFTMMU
libcacard: initial commit libcacard emulates a Common Access Card (CAC) which is a standard for smartcards. It is used by the emulated ccid card introduced in a following patch. Docs are available in docs/libcacard.txt Signed-off-by: Alon Levy <alevy@redhat.com> --- changes from v24->v25: * Fix out of tree builds. * Fix build with linux-user targets. changes from v23->v24: (Jes Sorensen review 2) * Makefile.target: use obj-$(CONFIG_*) += * remove unrequired includes, include qemu-common before qemu-thread * required adding #define NO_NSPR_10_SUPPORT (harmless) changes from v22->v23: * configure fixes: (reported by Stefan Hajnoczi) * test a = b, not a == b (second isn't portable) * quote $source_path in case it contains spaces - this doesn't really help since there are many other places that need similar fixes, not introduced by this patch. changes from v21->v22: * fix configure to not link libcacard if nss not found (reported by Stefan Hajnoczi) * fix vscclient linkage with simpletrace backend (reported by Stefan Hajnoczi) * card_7816.c: add missing break in ERROR_DATA_NOT_FOUND (reported by William van de Velde) changes from v20->v21: (Jes Sorensen review) * use qemu infrastructure: qemu-thread, qemu-common (qemu_malloc and qemu_free), error_report * assert instead of ASSERT * cosmetic fixes * use strpbrk and isspace * add --disable-nss --enable-nss here, instead of in the final patch. * split vscclient, passthru and docs to following patches. changes from v19->v20: * checkpatch.pl changes from v15->v16: Build: * don't erase self with distclean * fix make clean after make distclean * Makefile: make vscclient link quiet Behavioral: * vcard_emul_nss: load coolkey in more situations * vscclient: * use hton,ntoh * send init on connect, only start vevent thread on response * read payload after header check, before type switch * remove Reconnect * update for vscard_common changes, empty Flush implementation Style/Whitespace: * fix wrong variable usage * remove unused variable * use only C style comments * add copyright header * fix tabulation Signed-off-by: Alon Levy <alevy@redhat.com> libcacard: fix out of tree builds
2010-11-28 15:36:38 +01:00
ifndef CONFIG_LINUX_USER
ifndef CONFIG_BSD_USER
libcacard: initial commit libcacard emulates a Common Access Card (CAC) which is a standard for smartcards. It is used by the emulated ccid card introduced in a following patch. Docs are available in docs/libcacard.txt Signed-off-by: Alon Levy <alevy@redhat.com> --- changes from v24->v25: * Fix out of tree builds. * Fix build with linux-user targets. changes from v23->v24: (Jes Sorensen review 2) * Makefile.target: use obj-$(CONFIG_*) += * remove unrequired includes, include qemu-common before qemu-thread * required adding #define NO_NSPR_10_SUPPORT (harmless) changes from v22->v23: * configure fixes: (reported by Stefan Hajnoczi) * test a = b, not a == b (second isn't portable) * quote $source_path in case it contains spaces - this doesn't really help since there are many other places that need similar fixes, not introduced by this patch. changes from v21->v22: * fix configure to not link libcacard if nss not found (reported by Stefan Hajnoczi) * fix vscclient linkage with simpletrace backend (reported by Stefan Hajnoczi) * card_7816.c: add missing break in ERROR_DATA_NOT_FOUND (reported by William van de Velde) changes from v20->v21: (Jes Sorensen review) * use qemu infrastructure: qemu-thread, qemu-common (qemu_malloc and qemu_free), error_report * assert instead of ASSERT * cosmetic fixes * use strpbrk and isspace * add --disable-nss --enable-nss here, instead of in the final patch. * split vscclient, passthru and docs to following patches. changes from v19->v20: * checkpatch.pl changes from v15->v16: Build: * don't erase self with distclean * fix make clean after make distclean * Makefile: make vscclient link quiet Behavioral: * vcard_emul_nss: load coolkey in more situations * vscclient: * use hton,ntoh * send init on connect, only start vevent thread on response * read payload after header check, before type switch * remove Reconnect * update for vscard_common changes, empty Flush implementation Style/Whitespace: * fix wrong variable usage * remove unused variable * use only C style comments * add copyright header * fix tabulation Signed-off-by: Alon Levy <alevy@redhat.com> libcacard: fix out of tree builds
2010-11-28 15:36:38 +01:00
# libcacard needs qemu-thread support, and besides is only needed by devices
# so not requires with linux-user / bsd-user targets
libcacard: initial commit libcacard emulates a Common Access Card (CAC) which is a standard for smartcards. It is used by the emulated ccid card introduced in a following patch. Docs are available in docs/libcacard.txt Signed-off-by: Alon Levy <alevy@redhat.com> --- changes from v24->v25: * Fix out of tree builds. * Fix build with linux-user targets. changes from v23->v24: (Jes Sorensen review 2) * Makefile.target: use obj-$(CONFIG_*) += * remove unrequired includes, include qemu-common before qemu-thread * required adding #define NO_NSPR_10_SUPPORT (harmless) changes from v22->v23: * configure fixes: (reported by Stefan Hajnoczi) * test a = b, not a == b (second isn't portable) * quote $source_path in case it contains spaces - this doesn't really help since there are many other places that need similar fixes, not introduced by this patch. changes from v21->v22: * fix configure to not link libcacard if nss not found (reported by Stefan Hajnoczi) * fix vscclient linkage with simpletrace backend (reported by Stefan Hajnoczi) * card_7816.c: add missing break in ERROR_DATA_NOT_FOUND (reported by William van de Velde) changes from v20->v21: (Jes Sorensen review) * use qemu infrastructure: qemu-thread, qemu-common (qemu_malloc and qemu_free), error_report * assert instead of ASSERT * cosmetic fixes * use strpbrk and isspace * add --disable-nss --enable-nss here, instead of in the final patch. * split vscclient, passthru and docs to following patches. changes from v19->v20: * checkpatch.pl changes from v15->v16: Build: * don't erase self with distclean * fix make clean after make distclean * Makefile: make vscclient link quiet Behavioral: * vcard_emul_nss: load coolkey in more situations * vscclient: * use hton,ntoh * send init on connect, only start vevent thread on response * read payload after header check, before type switch * remove Reconnect * update for vscard_common changes, empty Flush implementation Style/Whitespace: * fix wrong variable usage * remove unused variable * use only C style comments * add copyright header * fix tabulation Signed-off-by: Alon Levy <alevy@redhat.com> libcacard: fix out of tree builds
2010-11-28 15:36:38 +01:00
obj-$(CONFIG_SMARTCARD_NSS) += $(addprefix ../libcacard/, $(libcacard-y))
endif # CONFIG_BSD_USER
libcacard: initial commit libcacard emulates a Common Access Card (CAC) which is a standard for smartcards. It is used by the emulated ccid card introduced in a following patch. Docs are available in docs/libcacard.txt Signed-off-by: Alon Levy <alevy@redhat.com> --- changes from v24->v25: * Fix out of tree builds. * Fix build with linux-user targets. changes from v23->v24: (Jes Sorensen review 2) * Makefile.target: use obj-$(CONFIG_*) += * remove unrequired includes, include qemu-common before qemu-thread * required adding #define NO_NSPR_10_SUPPORT (harmless) changes from v22->v23: * configure fixes: (reported by Stefan Hajnoczi) * test a = b, not a == b (second isn't portable) * quote $source_path in case it contains spaces - this doesn't really help since there are many other places that need similar fixes, not introduced by this patch. changes from v21->v22: * fix configure to not link libcacard if nss not found (reported by Stefan Hajnoczi) * fix vscclient linkage with simpletrace backend (reported by Stefan Hajnoczi) * card_7816.c: add missing break in ERROR_DATA_NOT_FOUND (reported by William van de Velde) changes from v20->v21: (Jes Sorensen review) * use qemu infrastructure: qemu-thread, qemu-common (qemu_malloc and qemu_free), error_report * assert instead of ASSERT * cosmetic fixes * use strpbrk and isspace * add --disable-nss --enable-nss here, instead of in the final patch. * split vscclient, passthru and docs to following patches. changes from v19->v20: * checkpatch.pl changes from v15->v16: Build: * don't erase self with distclean * fix make clean after make distclean * Makefile: make vscclient link quiet Behavioral: * vcard_emul_nss: load coolkey in more situations * vscclient: * use hton,ntoh * send init on connect, only start vevent thread on response * read payload after header check, before type switch * remove Reconnect * update for vscard_common changes, empty Flush implementation Style/Whitespace: * fix wrong variable usage * remove unused variable * use only C style comments * add copyright header * fix tabulation Signed-off-by: Alon Levy <alevy@redhat.com> libcacard: fix out of tree builds
2010-11-28 15:36:38 +01:00
endif # CONFIG_LINUX_USER
obj-$(CONFIG_GDBSTUB_XML) += gdbstub-xml.o
$(QEMU_PROG): $(obj-y) $(obj-$(TARGET_BASE_ARCH)-y)
$(call LINK,$^)
gdbstub-xml.c: $(TARGET_XML_FILES) $(SRC_PATH)/scripts/feature_to_c.sh
$(call quiet-command,rm -f $@ && $(SHELL) $(SRC_PATH)/scripts/feature_to_c.sh $@ $(TARGET_XML_FILES)," GEN $(TARGET_DIR)$@")
hmp-commands.h: $(SRC_PATH)/hmp-commands.hx
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@," GEN $(TARGET_DIR)$@")
qmp-commands.h: $(SRC_PATH)/qmp-commands.hx
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@," GEN $(TARGET_DIR)$@")
clean:
rm -f *.o *.a *~ $(PROGS) nwfpe/*.o fpu/*.o
rm -f *.d */*.d tcg/*.o ide/*.o 9pfs/*.o
rm -f hmp-commands.h qmp-commands.h gdbstub-xml.c
ifdef CONFIG_TRACE_SYSTEMTAP
rm -f *.stp
endif
install: all
ifneq ($(PROGS),)
$(INSTALL) -m 755 $(PROGS) "$(DESTDIR)$(bindir)"
ifneq ($(STRIP),)
$(STRIP) $(patsubst %,"$(DESTDIR)$(bindir)/%",$(PROGS))
endif
endif
ifdef CONFIG_TRACE_SYSTEMTAP
$(INSTALL_DIR) "$(DESTDIR)$(datadir)/../systemtap/tapset"
$(INSTALL_DATA) $(QEMU_PROG).stp "$(DESTDIR)$(datadir)/../systemtap/tapset"
endif
# Include automatically generated dependency files
-include $(wildcard *.d */*.d)