Commit Graph

923 Commits

Author SHA1 Message Date
Blue Swirl cffc581873 Sparc: split lazy condition code handling op helpers
Move lazy condition code handling op helpers to cc_helper.c.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-23 15:09:28 +00:00
Blue Swirl 2e2f4ade86 Sparc: avoid AREG0 for float and VIS ops
Make floating point and VIS ops take a parameter for CPUState instead
of relying on global env.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-23 15:09:13 +00:00
Blue Swirl 1bccec25e1 Sparc: split FPU and VIS op helpers
Move FPU op helpers to fop_helper.c. Move VIS op helpers to vis_helper.c,
compile it only for Sparc64.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-23 15:08:56 +00:00
Blue Swirl ab3b491f21 Sparc: split helper.c
Move CPU init to cpu_init.c and interrupt handling to int32_helper.c
for Sparc32 and int64_helper.c for Sparc64.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-23 15:07:52 +00:00
Jan Kiszka cfce6d8934 i8259: Move to hw library
No target-specific bits remaining, let's move it over.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16 11:11:56 +00:00
Max Filippov 0200db650e target-xtensa: add Avnet LX60/LX110/LX200 boards
These boards carry similar hardware: SDRAM (48M for LX110, 64M for LX60,
96M for LX200), 16 Mbyte FLASH, FPGA, 10/100 Mbps Ethernet PHY and 16550
UART. FPGA may be loaded with almost any Tensilica processor. It is also
used to implement Ethernet MAC, e.g. OpenCores 10/100 Mbps Ethernet MAC
and LED/DIP switches access.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16 10:42:21 +00:00
Max Filippov 5e40857374 target-xtensa: rename dc232b board to sim
This is to get aligned with the linux name for this machine.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16 10:40:23 +00:00
Max Filippov 935f7a2b42 target-xtensa: add fsf core
This is FSF big endian core implemented through linux overlay.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16 10:40:16 +00:00
Max Filippov 53add759be target-xtensa: add dc232b core
This is Diamond 232L Standard Core Rev.B (LE), implemented through
linux/gdb overlay.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16 10:40:02 +00:00
Max Filippov 63f95e4c65 target-xtensa: remove hand-written xtensa cores implementations
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16 10:39:36 +00:00
Anthony Liguori 36f490b176 Merge remote-tracking branch 'qemu-kvm-tmp/memory/batch' into staging 2011-10-14 10:44:52 -05:00
Avi Kivity 6bf9fd43cf Introduce PortioList
Add a type and methods for manipulating a list of disjoint I/O ports,
used in some older hardware devices.

Based on original patch by Richard Henderson.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-11 15:57:07 +02:00
Anthony Liguori ebffe2afce Merge remote-tracking branch 'qmp/queue/qmp' into staging 2011-10-10 08:21:46 -05:00
Richard Henderson 80bb2ff770 target-alpha: Add CLIPPER emulation.
This is a DP264 variant, SMP capable, no unusual hardware present.

The emulation does not currently include any PCI IOMMU code.
Hopefully the generic support for that can be merged to HEAD soon.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-08 08:49:09 -07:00
Fabien Chouteau ddd1055b07 PPC: booke timers
While working on the emulation of the freescale p2010 (e500v2) I realized that
there's no implementation of booke's timers features. Currently mpc8544 uses
ppc_emb (ppc_emb_timers_init) which is close but not exactly like booke (for
example booke uses different SPR).

Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-10-06 09:48:09 +02:00
Alexander Graf 0a6b8dde65 PPC: Add new target config for pseries
We only support -M pseries when certain prerequisites are met, such
as a PPC64 guest and libfdt. To only gather these requirements in
a single place, this patch introduces a new CONFIG_PSERIES variable
that gets set when all prerequisites are met.

Signed-off-by: Alexander Graf <agraf@suse.de>
2011-10-06 09:48:02 +02:00
Alexander Graf 5c145dacac PPC: E500: Add PV spinning code
CPUs that are not the boot CPU need to run in spinning code to check if they
should run off to execute and if so where to jump to. This usually happens
by leaving secondary CPUs looping and checking if some variable in memory
changed.

In an environment like Qemu however we can be more clever. We can just export
the spin table the primary CPU modifies as MMIO region that would event based
wake up the respective secondary CPUs. That saves us quite some cycles while
the secondary CPUs are not up yet.

So this patch adds a PV device that simply exports the spinning table into the
guest and thus allows the primary CPU to wake up secondary ones.

Signed-off-by: Alexander Graf <agraf@suse.de>

---

v1 -> v2:

  - change into MMIO scheme
  - map the secondary NIP instead of 0 1:1
  - only map 64MB for TLB, same as u-boot
  - prepare code for 64-bit spinnings

v2 -> v3:

  - remove r6
  - set MAS2_M
  - map EA 0
  - use second TLB1 entry

v3 -> v4:

  - change to memoryops

v4 -> v5:

  - fix endianness bugs

v5 -> v6:

  - add header
2011-10-06 09:47:52 +02:00
Alexander Graf d751dfb313 PPC: Move openpic to target specific code compilation
The MPIC has some funny feature where it maps different registers to an MMIO
region depending which CPU accesses them.

To be able to reflect that, we need to make OpenPIC be compiled in the target
code, so it can access cpu_single_env.

Signed-off-by: Alexander Graf <agraf@suse.de>
2011-10-06 09:43:32 +02:00
Anthony Liguori e3193601c8 qapi: use middle mode in QMP server
Use the new middle mode within the existing QMP server.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-04 11:00:46 -03:00
Lluís Vilanova 937b1258b7 build: Move tracing objects into libuser on usermode emulation targets
This will apply libuser-specific compilation flags (like the ones added by
--enable-user-pie), but keep softmmu emulation targets "as-is".

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-16 08:25:56 -05:00
Max Filippov 47d05a8629 target-xtensa: add dc232b core and board
This is Diamond 232L Standard Core Rev.B (LE).

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10 16:57:40 +00:00
Max Filippov 1ddeaa5d42 target-xtensa: implement SIMCALL
Tensilica iss provides support for applications running in freestanding
environment through SIMCALL command. It is used by Tensilica libc to
access argc/argv, for file I/O, etc.

Note that simcalls that accept buffer addresses expect virtual addresses.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10 16:57:39 +00:00
Max Filippov 7b039f741c target-xtensa: add sample board
Sample board and sample CPU core are used for debug and may be used for
development of custom SoC emulators.

This board has two fixed size memory regions for DTCM and ITCM and
variable length SRAM region.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10 16:57:36 +00:00
Max Filippov 2328826b1d target-xtensa: add target stubs
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10 16:57:36 +00:00
Blue Swirl 1213406bf8 g364fb: compile in hwlib
Compile g364fb in hwlib. Two compilations less for the full build.

Acked-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10 14:46:12 +00:00
Avi Kivity fcdf7729be ReadWriteHandler: remove
No longer used.

Reviewed-by: Richard Henderson  <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-04 17:46:50 +03:00
Anthony Liguori 9aed1e036d Rename qemu -> qemu-system-i386
This has been discussed before in the past.  The special casing really makes no
sense anymore.  This seems like a good change to make for 1.0.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-02 10:34:55 -05:00
Lluís 6d8a764e0f trace: [configure] rename CONFIG_*_TRACE into CONFIG_TRACE_*
Provides a more hierarchical view of the variable domain.

Also adds the CONFIG_TRACE_* variables for all backends.

[Stefan added missing 'test' in stap if statement]

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-09-01 10:34:53 +01:00
Lluís e03b41d477 build: Fix linkage of QEMU_PROG
Using '$^' to establish the files to link with will remove any repeated entries
in the list of dependencies.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
2011-09-01 10:34:53 +01:00
Brad 0fc6b5828f Fix build on OpenBSD with BSD userland emu and smartcard NSS enabled
The first issue is the hard coded POSIX Real Time extensions library in the
libcacard/Makefile. From looking at the code it doesn't seem this is necessary
anyway. Robert Relyea seems to think it most likely isn't necessary.

The second issue was the missing exclusion of the BSD userland binary
builds from the addition of this Makefile target for the smartcard NSS
code which breaks the builds if smartcard NSS support is enabled.

pastebin clip of the build failure..

http://pastebin.com/raw.php?i=BLCKd3s6

Signed-off-by: Brad Smith <brad@comstyle.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-08-27 15:42:02 +00:00
Anthony Liguori 01e0451a08 Revert "Merge remote-tracking branch 'qemu-kvm/memory/batch' into staging"
This reverts commit 8ef9ea85a2, reversing
changes made to 444dc48298.

From Avi:

  Please revert the entire pull (git revert 8ef9ea85a2) while I work this
  out - it isn't trivial.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-25 14:39:18 -05:00
Avi Kivity fb48f855ee ReadWriteHandler: remove
No longer used.

Reviewed-by: Richard Henderson  <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-08-24 20:17:43 +03:00
Anthony Liguori 41a748265f Remove qemu_malloc/qemu_free
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-20 23:01:08 -05:00
Edgar E. Iglesias bbea04df98 etrax: Remove hw/etraxfs.c.
The Bare ETRAX FS board was a fictive machine that I used when
developing the CRIS system emulation. Since we support the
real AXIS-dev88 developer boards, there is no reason to
keep the fictive one around.

This commit also removes the double registration of the axis-dev88
board.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-08-09 12:22:38 +02:00
Kirill Batuzov 8f2e8c07a6 Add TCG optimizations stub
Added file tcg/optimize.c to hold TCG optimizations. Function tcg_optimize
is called from tcg_gen_code_common. It calls other functions performing
specific optimizations. Stub for constant folding was added.

Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-30 10:51:25 +00:00
Vasily Khoruzhick 3bf11207c0 Add support for Zipit Z2 machine
Zipit Z2 is small PXA270 based handheld.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30 07:08:30 +02:00
Avi Kivity 093bc2cd88 Hierarchical memory region API
The memory API separates the attributes of a memory region (its size, how
reads or writes are handled, dirty logging, and coalescing) from where it
is mapped and whether it is enabled.  This allows a device to configure
a memory region once, then hand it off to its parent bus to map it according
to the bus configuration.

Hierarchical registration also allows a device to compose a region out of
a number of sub-regions with different properties; for example some may be
RAM while others may be MMIO.

Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-29 08:25:42 -05:00
Anthony Liguori e18df14185 Add hard build dependency on glib
GLib is an extremely common library that has a portable thread implementation
along with tons of other goodies.

GLib and GObject have a fantastic amount of infrastructure we can leverage in
QEMU including an object oriented programming infrastructure.

Short term, it has a very nice thread pool implementation that we could leverage
in something like virtio-9p.  It also has a test harness implementation that
this series will use.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
2011-07-21 16:48:13 -03:00
Blue Swirl 21673cdecb Avoid CPU endian memory accesses in devices
Don't compile virtio.c in hwlib, it depends on memory accesses
performed in CPU endianness.

Make loads and stores in CPU endianness unavailable to devices
and poison them to avoid further bugs.

Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-20 21:22:43 +00:00
Blue Swirl a3ce3668cc Merge branch 'for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm
* 'for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm:
  target-arm: Fix BASEPRI, BASEPRI_MAX, and FAULTMASK access
  target-arm: Minimal implementation of performance counters
  Revert "Makefile.target: Allow target helpers to be in any *_helper.c file"
  Revert "target-arm: Use global env in neon_helper.c helpers"
  target-arm: Pass fp status pointer explicitly to neon fp helpers
  target-arm: Make VFP binop helpers take pointer to fpstatus, not CPUState
  target-arm: Add helper function to generate code to get fpstatus pointer
  Revert "target-arm: Use global env in iwmmxt_helper.c helpers"

Conflicts:
	Makefile.target
2011-07-20 20:23:01 +00:00
Jan Kiszka 868bb33faa xen: Fold CONFIG_XEN_MAPCACHE into CONFIG_XEN
Xen won't be enabled if there is no backend support available for the
host. And that also means the map cache will work. So drop the separate
config switch and move the required stubs over to xen-stub.c.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-17 01:54:24 +02:00
Jan Kiszka 6dbd588a41 xen: Clean up build system
Introduce CONFIG_XEN_BACKEND so that this new config solely controls the
target-independent backend build and CONFIG_XEN can focus on per-target
building.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-17 01:54:24 +02:00
Blue Swirl 3b88670664 Merge branch 'ppc-next' of git://repo.or.cz/qemu/agraf
* 'ppc-next' of git://repo.or.cz/qemu/agraf:
  PPC: move TLBs to their own arrays
  PPC: 440: Use 440 style MMU as default, so Qemu knows the MMU type
  PPC: E500: Use MAS registers instead of internal TLB representation
  PPC: Only set lower 32bits with mtmsr
  PPC: update openbios firmware
  PPC: mpc8544ds: Add hypervisor node
  PPC: calculate kernel,initrd,cmdline locations dynamically
  target-ppc: Handle memory-forced I/O controller access
  PPC: E500: Implement reboot controller
2011-07-01 21:12:50 +00:00
Blue Swirl cea5f9a28f cpu-exec.c: avoid AREG0 use
Make functions take a parameter for CPUState instead of relying
on global env. Pass CPUState pointer to TCG prologue, which moves
it to AREG0.

Thanks to Peter Maydell and Laurent Desnogues for the ARM prologue
change.

Revert the hacks to avoid AREG0 use on Sparc hosts.

Move cpu_has_work() and cpu_pc_from_tb() from exec.h to cpu.h.

Compile the file without HELPER_CFLAGS.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26 18:25:38 +00:00
Jan Kiszka af2be20777 Fix fallouts from Linux header inclusion
This is an all-in-one fix for the smaller and bigger mistakes of the
build system changes for accompanied Linux headers:
 - only enable KVM and vhost on Linux hosts
 - fix powerpc asm header symlink
 - do not use Linux headers on non-Linux hosts
 - fix kvmclock for !CONFIG_KVM
 - fix s390 build on non-Linux hosts

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Tested-by: Andreas Färber <andreas.faerber@web.de>
Tested-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26 17:35:47 +00:00
Peter Maydell b501b5e461 Revert "Makefile.target: Allow target helpers to be in any *_helper.c file"
Reverts commit 348883d482, so the
global env is no longer available to helper.c files other than
op_helper.c.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2011-06-22 15:01:46 +00:00
Anthony Liguori d6034a3a61 Merge remote-tracking branch 'qemu-kvm/uq/master' into staging 2011-06-22 07:13:10 -05:00
Jan Kiszka e205c7902f Switch build system to accompanied kernel headers
This helps reducing our build-time checks for feature support in the
available Linux kernel headers. And it helps users that do not have
sufficiently recent headers installed on their build machine.

Consequently, the patch removes and build-time checks for kvm and vhost
in configure, the --kerneldir switch, and KVM_CFLAGS. Kernel headers are
supposed to be provided by QEMU only.

s390 needs some extra love as it carries redefinitions from kernel
headers.

CC: Alexander Graf <agraf@suse.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-06-20 15:16:12 -03:00
Steven Smith 01195b7347 xen: Add the Xen platform pci device
Introduce a new emulated PCI device, specific to fully virtualized Xen
guests.  The device is necessary for PV on HVM drivers to work.

Signed-off-by: Steven Smith <ssmith@xensource.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-19 04:43:04 +02:00
Alexander Graf b0fb84236d PPC: E500: Implement reboot controller
When Linux reboots an e500 VM, it writes to a magic register in the
"global-utilities" device indicated by the device tree. We were not
emulating that device so far, rendering the VM reboot-less.

This patch implements that device with only the reboot functionality
implemented and adds it to the device tree. With this patch applied,
I can successfully reboot a -M mpc8544ds VM.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Andreas Färber <andreas.faerber@web.de>
2011-06-17 02:58:23 +02:00
Edgar E. Iglesias 448293961f Merge remote branch 'rth/axp-next' into alpha-merge
* rth/axp-next: (26 commits)
  target-alpha: Implement TLB flush primitives.
  target-alpha: Use a fixed frequency for the RPCC in system mode.
  target-alpha: Trap for unassigned and unaligned addresses.
  target-alpha: Remap PIO space for 43-bit KSEG for EV6.
  target-alpha: Implement cpu_alpha_handle_mmu_fault for system mode.
  target-alpha: Implement more CALL_PAL values inline.
  target-alpha: Disable interrupts properly.
  target-alpha: All ISA checks to use TB->FLAGS.
  target-alpha: Swap shadow registers moving to/from PALmode.
  target-alpha: Implement do_interrupt for system mode.
  target-alpha: Add IPRs to be used by the emulation PALcode.
  target-alpha: Use kernel mmu_idx for pal_mode.
  target-alpha: Add various symbolic constants.
  target-alpha: Use do_restore_state for arithmetic exceptions.
  target-alpha: Tidy up arithmetic exceptions.
  target-alpha: Tidy exception constants.
  target-alpha: Enable the alpha-softmmu target.
  target-alpha: Rationalize internal processor registers.
  target-alpha: Merge HW_REI and HW_RET implementations.
  target-alpha: Cleanup MMU modes.
  ...
2011-06-10 22:21:14 +02:00
Anthony Liguori 93e0597ef9 Merge remote-tracking branch 'jvrao/for-anthony' into staging 2011-06-08 12:15:43 -05:00
Jan Kiszka 7665385a85 virtio: Move virtio-pci to hw library
This module has no target dependencies (except for target_phys_addr_t
size) and can thus be built as part of libhw.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-06-08 09:11:31 +01:00
Glauber Costa a90d469007 Add an isa device for SGA
This patch adds a dummy legacy ISA device whose responsibility is to
deploy sgabios, an option rom for a serial graphics adapter.
The proposal is that this device is always-on when -nographics,
but can otherwise be enable in any setup when -device sga is used.

[v2: suggestions on qdev by Markus ]
[v3: cleanups and documentation, per list suggestions ]

Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-06-07 13:52:30 -05:00
Aurelien Jarno cf67c6bad5 softfloat-native: remove
Remove softfloat-native support, all targets are now using softfloat
instead.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-06-03 16:07:51 +02:00
Stefan Weil 873c321393 virtio-9p: Use relative includes for files in hw
Commit 353ac78d49 moved the files
without fixing the include paths. It used a modified CFLAGS
to add hw to the include search path, but this breaks builds
where the user wants to set special CFLAGS. Long include paths
also increase compilation time.

Therefore this patch removes the special CFLAGS for virtio
and fixes the include statements by using relative include paths.

v2: Remove special CFLAGS.
v3: Update needed for latest QEMU.

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Venkateswararao Jujjuri (JV) <jvrao@linux.vnet.ibm.com>
2011-06-01 10:25:03 -07:00
Aneesh Kumar K.V f4f61d272e virtio-9p: Move device specific code to virtio-9p-device
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri (JV) <jvrao@linux.vnet.ibm.com>
2011-06-01 10:24:50 -07:00
Richard Henderson b758aca1f6 target-alpha: Enable the alpha-softmmu target.
With all of the pre-existing code that would not compile gone,
this is the earliest point at which the target can be enabled.

There is no machine defined yet, so this will crash on startup.
Enable the target anyway, to make sure that further compilation
problems do not creep back in.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-05-31 10:18:05 -07:00
Richard Henderson 352e48b0f4 target-alpha: Remove partial support for palcode emulation.
This code does not work, and will be replaced by a bios image.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-05-31 10:18:04 -07:00
Blue Swirl 42a623c7db Move user emulator stuff from cpu-exec.c to user-exec.c
Simplify cpu-exec.c by refactoring.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-05-28 06:26:00 +00:00
Jun Nakajima 432d268c05 xen: Introduce the Xen mapcache
On IA32 host or IA32 PAE host, at present, generally, we can't create
an HVM guest with more than 2G memory, because generally it's almost
impossible for Qemu to find a large enough and consecutive virtual
address space to map an HVM guest's whole physical address space.
The attached patch fixes this issue using dynamic mapping based on
little blocks of memory.

Each call to qemu_get_ram_ptr makes a call to qemu_map_cache with the
lock option, so mapcache will not unmap these ram_ptr.

Blocks that do not belong to the RAM, but usually to a device ROM or to
a framebuffer, are handled in a separate function. So the whole RAMBlock
can be map.

Signed-off-by: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08 10:10:01 +02:00
Anthony PERARD 3285cf4fe7 xen: Add initialisation of Xen
The xenpv machine use the common init function.

Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08 10:10:00 +02:00
Anthony PERARD ce6bc29458 xen: Make Xen build once.
xen_domainbuild and xen_machine_pv are built only for i386 targets.

Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08 10:09:59 +02:00
Michael Walle 57aa265d46 lm32: add Milkymist Minimac2 support
This patch adds support for Milkymist's minimal Ethernet MAC v2. It
superseds minimac1.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-05-03 10:48:40 +02:00
Aneesh Kumar K.V 353ac78d49 virtio-9p: move 9p files around
Now that we start adding more files related to 9pfs
it make sense to move them to a separate directory

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2011-04-27 08:24:37 -07:00
Dmitry Eremin-Solenikov c64b21d519 Basic implementation of Sharp Zaurus SL-5500 collie PDA
Add very basic implementation of collie PDA emulation. The system lacks
LoCoMo and graphics/sound emulation. Linux kernel boots up to mounting
rootfs (theoretically it can be provided in pflash images).

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-20 12:59:15 +02:00
Dmitry Eremin-Solenikov 5bc95aa246 Implement basic part of SA-1110/SA-1100
Basic implementation of DEC/Intel SA-1100/SA-1110 chips emulation.
Implemented:
 - IRQs
 - GPIO
 - PPC
 - RTC
 - UARTs (no IrDA/etc.)
 - OST reused from pxa25x

Everything else is TODO (esp. PM/idle/sleep!) - see the todo in the
hw/strongarm.c

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-20 12:59:15 +02:00
Peter Maydell 348883d482 Makefile.target: Allow target helpers to be in any *_helper.c file
Build all files matching *_helper.c with HELPER_CFLAGS, not just
op_helper.c. This allows you to put target helper functions which
use the global 'env' variable in multiple source files.

This only affects the ARM target as all the other targets currently only
have op_helper.c.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-04 20:18:06 +02:00
Michael Walle 5052d2277f lm32: add support for the Milkymist board
This patch adds almost complete support for the Milkymist system-on-chip
(http://www.milkymist.org).

Additional to running bare metal applications, booting a linux kernel with
initrd is supported.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04 10:26:54 +02:00
Michael Walle d23948b15a lm32: add Milkymist VGAFB support
This patch adds support for Milkymist's VGA framebuffer.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04 10:26:53 +02:00
Michael Walle 883de16b46 lm32: add Milkymist UART support
This patch adds support for Milkymist's simple UART.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04 10:26:53 +02:00
Michael Walle 0670dadd64 lm32: add Milkymist TMU2 support
This patch adds support for Milkymist's texture mapping unit. For fast
computation this model needs hardware accelerated 3D graphics support
(OpenGL). There is no graphical output, all computations belong to internal
framebuffers only.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04 10:26:53 +02:00
Michael Walle 9683242448 lm32: add Milkymist System Controller support
This patch adds support for Milkymist's System Controller core. The model
has the following features:
 - support for shutting down and restarting the board
 - provide two timers and GPIO
 - provide registers for system identification and reading the boards
   capabilities

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04 10:26:53 +02:00
Michael Walle 87a381ec34 lm32: add Milkymist SoftUSB support
This patch adds support for Milkymist's SoftUSB core. This model differ
from the real hardware in its functionality. The real hardware consits of a
tiny freely programmable microcontroller which controls the USB ports. For
simplicity reasons, this model emulates only keyboard and mouse input
devices, eg. input events translates directly to the corresponding expected
messages.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04 10:26:53 +02:00
Michael Walle 5ee18b9c68 lm32: add Milkymist PFPU support
This patch adds support for Milkymist's Programmable FPU.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04 10:26:53 +02:00
Michael Walle 0742454485 lm32: add Milkymist Minimac support
This patch adds support for Milkymist's minimal Ethernet MAC.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04 10:26:53 +02:00
Michael Walle b4e37d9856 lm32: add Milkymist memory card support
This patch adds support for Milkymist's memory card core.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04 10:26:53 +02:00
Michael Walle e4dc6d2cdc lm32: add Milkymist HPDMC support
This patch adds support for the Milkymist's High Performance Dynamic Memory
Controller. This is just a dumb model without any functionality. While the
real hardware acts for example as a bridge between software and hardware
for sending SDRAM commans, this model will only eat up these commands and
always returns the expected hardware states, eg. PLL locked etc.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04 10:26:53 +02:00
Michael Walle 25a8bb96f4 lm32: add Milkymist AC97 support
This patch adds support for the Milkymist AC97 compatible sound output and
input core.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04 10:26:53 +02:00
Alexander Graf 1b01b4e717 Only build ivshmem when CONFIG_PCI && CONFIG_KVM
The ivshmem depends on PCI and KVM, not only KVM. Reflect this
in the Makefile, so we don't get build errors on s390x.

Signed-off-by: Alexander Graf <agraf@suse.de>
CC: Cam Macdonell <cam@cs.ualberta.ca>
CC: Juan Quintela <quintela@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-04 00:34:08 +02:00
Peter Maydell 2055283bcc hw/vexpress.c: Add model of ARM Versatile Express board
Add a model of the ARM Versatile Express board (with A9MPx4
daughterboard).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-03 18:04:36 +02:00
Robert Relyea 111a38b018 libcacard: initial commit
libcacard emulates a Common Access Card (CAC) which is a standard
for smartcards. It is used by the emulated ccid card introduced in
a following patch. Docs are available in docs/libcacard.txt

Signed-off-by: Alon Levy <alevy@redhat.com>

---

changes from v24->v25:
 * Fix out of tree builds.
 * Fix build with linux-user targets.

changes from v23->v24: (Jes Sorensen review 2)
 * Makefile.target: use obj-$(CONFIG_*) +=
 * remove unrequired includes, include qemu-common before qemu-thread
  * required adding #define NO_NSPR_10_SUPPORT (harmless)

changes from v22->v23:
 * configure fixes: (reported by Stefan Hajnoczi)
  * test a = b, not a == b (second isn't portable)
  * quote $source_path in case it contains spaces
   - this doesn't really help since there are many other places
     that need similar fixes, not introduced by this patch.

changes from v21->v22:
 * fix configure to not link libcacard if nss not found
    (reported by Stefan Hajnoczi)
 * fix vscclient linkage with simpletrace backend
    (reported by Stefan Hajnoczi)
 * card_7816.c: add missing break in ERROR_DATA_NOT_FOUND
    (reported by William van de Velde)

changes from v20->v21: (Jes Sorensen review)
 * use qemu infrastructure: qemu-thread, qemu-common (qemu_malloc
  and qemu_free), error_report
 * assert instead of ASSERT
 * cosmetic fixes
 * use strpbrk and isspace
 * add --disable-nss --enable-nss here, instead of in the final patch.
 * split vscclient, passthru and docs to following patches.

changes from v19->v20:
 * checkpatch.pl

changes from v15->v16:

Build:
 * don't erase self with distclean
 * fix make clean after make distclean
 * Makefile: make vscclient link quiet

Behavioral:
 * vcard_emul_nss: load coolkey in more situations
 * vscclient:
  * use hton,ntoh
  * send init on connect, only start vevent thread on response
  * read payload after header check, before type switch
  * remove Reconnect
  * update for vscard_common changes, empty Flush implementation

Style/Whitespace:
 * fix wrong variable usage
 * remove unused variable
 * use only C style comments
  * add copyright header
  * fix tabulation

Signed-off-by: Alon Levy <alevy@redhat.com>

libcacard: fix out of tree builds
2011-04-01 19:07:48 -05:00
Ben Herrenschmidt 6e270446d0 Implement PAPR virtual SCSI interface (ibmvscsi)
This patch implements the infrastructure and hypercalls necessary for
the PAPR specified Virtual SCSI interface.  This is the normal method
for providing (virtual) disks to PAPR partitions.

Signed-off-by: Ben Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 18:34:57 +02:00
David Gibson 8d90ad9005 Implement sPAPR Virtual LAN (ibmveth)
This patch implements the PAPR specified Inter Virtual Machine Logical
LAN; that is the virtual hardware used by the Linux ibmveth driver.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 18:34:56 +02:00
David Gibson b5cec4c5f2 Implement the PAPR (pSeries) virtualized interrupt controller (xics)
PAPR defines an interrupt control architecture which is logically divided
into ICS (Interrupt Control Presentation, each unit is responsible for
presenting interrupts to a particular "interrupt server", i.e. CPU) and
ICS (Interrupt Control Source, each unit responsible for one or more
hardware interrupts as numbered globally across the system).  All PAPR
virtual IO devices expect to deliver interrupts via this mechanism.  In
Linux, this interrupt controller system is handled by the "xics" driver.

On pSeries systems, access to the interrupt controller is virtualized via
hypercalls and RTAS methods.  However, the virtualized interface is very
similar to the underlying interrupt controller hardware, and similar PICs
exist un-virtualized in some other systems.

This patch implements both the ICP and ICS sides of the PAPR interrupt
controller.  For now, only the hypercall virtualized interface is provided,
however it would be relatively straightforward to graft an emulated
register interface onto the underlying interrupt logic if we want to add
a machine with a hardware ICS/ICP system in the future.

There are some limitations in this implementation: it is assumed for now
that only one instance of the ICS exists, although a full xics system can
have several, each responsible for a different group of hardware irqs.
ICP/ICS can handle both level-sensitve (LSI) and message signalled (MSI)
interrupt inputs.  For now, this implementation supports only MSI
interrupts, since that is used by PAPR virtual IO devices.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 18:34:56 +02:00
David Gibson 39ac845510 Implement hcall based RTAS for pSeries machines
On pSeries machines, operating systems can instantiate "RTAS" (Run-Time
Abstraction Services), a runtime component of the firmware which implements
a number of low-level, infrequently used operations.  On logical partitions
under a hypervisor, many of the RTAS functions require hypervisor
privilege.  For simplicity, therefore, hypervisor systems typically
implement the in-partition RTAS as just a tiny wrapper around a hypercall
which actually implements the various RTAS functions.

This patch implements such a hypercall based RTAS for our emulated pSeries
machine.  A tiny in-partition "firmware" calls a new hypercall, which
looks up available RTAS services in a table.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 18:34:56 +02:00
David Gibson 4040ab7237 Implement the bus structure for PAPR virtual IO
This extends the "pseries" (PAPR) machine to include a virtual IO bus
supporting the PAPR defined hypercall based virtual IO mechanisms.

So far only one VIO device is provided, the vty / vterm, providing
a full console (polled only, for now).

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 18:34:55 +02:00
David Gibson 9fdf0c2995 Start implementing pSeries logical partition machine
This patch adds a "pseries" machine to qemu.  This aims to emulate a
logical partition on an IBM pSeries machine, compliant to the
"PowerPC Architecture Platform Requirements" (PAPR) document.

This initial version is quite limited, it implements a basic machine
and PAPR hypercall emulation.  So far only one hypercall is present -
H_PUT_TERM_CHAR - so that a (write-only) console is available.

Multiple CPUs are permitted, with SMP entry handled kexec() style.

The machine so far more resembles an old POWER4 style "full system
partition" rather than a modern LPAR, in that the guest manages the
page tables directly, rather than via hypercalls.

The machine requires qemu to be configured with --enable-fdt.  The
machine can (so far) only be booted with -kernel - i.e. no partition
firmware is provided.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 18:34:55 +02:00
Michal Simek 00914b7d97 microblaze: Add PetaLogix ml605 MMU little-endian ref design
Add the first Microblaze little endian platform.
Platform uses uart16550, axi ethernet, timer, intc.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
2011-03-16 15:18:58 +01:00
Edgar E. Iglesias 93f1e4016b xilinx: Add AXIENET & DMA models
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
2011-03-16 15:18:58 +01:00
Michael Walle d821732aba lm32: EVR32 and uclinux BSP
This patch adds support for the following two BSPs:
 - LM32 EVR32 BSP (as used by RTEMS)
 - uclinux BSP by Theobroma Systems

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-03-07 13:42:37 +01:00
Michael Walle f19410ca69 lm32: system control model
This patch add support for a system control block. It is supposed to
act as helper for the emulated program. E.g. shutting down the VM or
printing test results. This model is intended for testing purposes only and
doesn't fit to any real hardware. Therefore, it is not added to any board
by default. Instead a user has to add it explicitly with the '-device'
commandline parameter.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-03-07 13:42:37 +01:00
Michael Walle 770ae5713a lm32: uart model
This patch add support for the LatticeMico32 UART.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-03-07 13:42:36 +01:00
Michael Walle ea7924dcc4 lm32: timer model
This patch adds support for the LatticeMico32 system timer.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-03-07 13:42:36 +01:00
Michael Walle 15d7dc4f80 lm32: juart model
This patch adds the JTAG UART model. It is accessed through special control
registers and opcodes. Therefore the translation uses callbacks to this
model.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-03-07 13:42:36 +01:00
Michael Walle 4ef66fa718 lm32: interrupt controller model
This patch adds the interrupt controller of the lm32. Because the PIC is
accessed through special control registers and opcodes, there are callbacks
from the lm32 translation code to this model.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-03-07 13:42:36 +01:00
Michael Walle 81ea0e1304 LatticeMico32 target support
This patch adds support for the LatticeMico32 softcore processor by Lattice
Semiconductor.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-03-07 13:42:36 +01:00
Blue Swirl 1c9c5fcdfe applesmc: make optional
Based on patch by David Ahern.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-20 09:34:16 +00:00
Jan Kiszka 0ec329dab9 kvm: x86: Introduce kvmclock device to save/restore its state
If kvmclock is used, which implies the kernel supports it, register a
kvmclock device with the sysbus. Its main purpose is to save and restore
the kernel state on migration, but this will also allow to visualize it
one day.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
CC: Glauber Costa <glommer@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-02-14 12:43:09 -02:00
Blue Swirl dd703b991c hpet: make optional
Ignore failure with hpet device creation.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-12 09:45:06 +00:00
Blue Swirl 86d864140b x86: make vmmouse optional
Compile vmmouse in hwlib. Ignore failure if vmmouse device can't be
created.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-12 09:43:44 +00:00
Mike Frysinger c3109ba1b1 linux-user/FLAT: allow targets to override FLAT processing
This brings flatload.c more in line with the current Linux FLAT loader
which allows targets to handle various FLAT aspects in their own way.
For the common behavior, the new functions get stubbed out.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
2011-02-09 10:33:54 +02:00
Fabien Chouteau b04d989054 SPARC: Emulation of Leon3
Leon3 is an open-source VHDL System-On-Chip, well known in space industry (more
information on http://www.gaisler.com).

Leon3 is made of multiple components available in the GrLib VHDL library.
Three devices are implemented: uart, timers and IRQ manager.
You can find code for these peripherals in the grlib_* files.

Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-24 20:54:34 +00:00
Blue Swirl 4c3b5a4891 Add scripts directory
Move build and user scripts into scripts directory.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-20 20:54:21 +00:00
Anthony Liguori a7bd621d7a Merge remote branch 'mst/for_anthony' into staging 2011-01-10 10:32:01 -06:00
Aurelien Jarno 818c2e1b97 Merge branch 'spice.v23.pull' of git://anongit.freedesktop.org/spice/qemu
* 'spice.v23.pull' of git://anongit.freedesktop.org/spice/qemu:
  vnc/spice: add set_passwd monitor command.
  vnc: support password expire
  vnc: auth reject cleanup
  spice: add qmp 'query-spice' and hmp 'info spice' commands.
  spice: connection events.
  spice: add qxl device
  spice: add qxl vgabios binary.
2010-12-27 22:59:48 +01:00
Isaku Yamahata b3a29fd560 build, pci: remove QMP dependency on core PCI code
by introducing pci-stub.c, eliminate QMP dependency on core PCI code
rquired by query-pci command.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-12-22 13:06:24 +02:00
Alexander Graf 3455749191 usb_ohci: Always use little endian
This patch replaces explicit bswaps with endianness hints to the
mmio layer.

Because we don't depend on the target endianness anymore, we can also
move the driver over to Makefile.objs.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11 15:24:26 +00:00
Alexander Graf 5cf7a3ca5b rtl8139: Declare as little endian
This patch replaces explicit bswaps with endianness hints to the
mmio layer.

Because we don't depend on the target endianness anymore, we can also
move the driver over to Makefile.objs.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11 15:24:26 +00:00
Alexander Graf 32600a309f e1000: Make little endian
The e1000 has compatibility code to handle big endianness which makes it
mandatory to be recompiled on different targets.

With the generic mmio endianness solution, there's no need for that anymore.
We just declare all mmio to be little endian and call it a day.

Because we don't depend on the target endianness anymore, we can also
move the driver over to Makefile.objs.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11 15:24:26 +00:00
Gerd Hoffmann a19cbfb346 spice: add qxl device
qxl is a paravirtual graphics card.  The qxl device is the bridge
between the guest and the spice server (aka libspice-server).  The
spice server will send the rendering commands to the spice client, which
will actually render them.

The spice server is also able to render locally, which is done in case
the guest wants read something from video memory.  Local rendering is
also used to support display over vnc and sdl.

qxl is activated using "-vga qxl".  qxl supports multihead, additional
cards can be added via '-device qxl".

[ v2: add copyright to files                     ]
[ v2: use qemu-common.h for standard includes    ]
[ v2: create separate qxl-vga device for primary ]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2010-12-09 14:23:24 +01:00
Paul Brook 01af7daf55 VirtIO config option
Make virtio devices optional.  Selecting individual devices is not useful
as the host bindings are all in one file.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-11-27 00:06:13 +00:00
Paul Brook f8f5cfbaa4 PCI config include
Split PCI config options into a separate file

Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-11-27 00:06:13 +00:00
Daniel P. Berrange c276b17da6 Add support for generating a systemtap tapset static probes
This introduces generation of a qemu.stp/qemu-system-XXX.stp
files which provides tapsets with friendly names for static
probes & their arguments. Instead of

    probe process("qemu").mark("qemu_malloc") {
        printf("Malloc %d %p\n", $arg1, $arg2);
    }

It is now possible todo

    probe qemu.system.i386.qemu_malloc {
        printf("Malloc %d %p\n", size, ptr);
    }

There is one tapset defined per target arch, for both
user and system emulators.

* Makefile.target: Generate stp files for each target
* tracetool: Support for generating systemtap tapsets
* configure: Check for whether systemtap is available
  with the DTrace backend

Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-21 09:16:56 -06:00
Anthony Liguori 371c338eca Revert "Add support for generating a systemtap tapset static probes"
This reverts commit 2834c3e014.

Conflicts:

	Makefile.target
2010-11-21 09:16:56 -06:00
Peter Maydell b88417062d Fix compilation failure with simple trace when srcdir==objdir
Fix a makefile error that meant that qemu would not compile if
the source and object directories were the same.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-16 14:35:00 -06:00
Daniel P. Berrange 2834c3e014 Add support for generating a systemtap tapset static probes
This introduces generation of a qemu.stp/qemu-system-XXX.stp
files which provides tapsets with friendly names for static
probes & their arguments. Instead of

    probe process("qemu").mark("qemu_malloc") {
        printf("Malloc %d %p\n", $arg1, $arg2);
    }

It is now possible todo

    probe qemu.system.i386.qemu_malloc {
        printf("Malloc %d %p\n", size, ptr);
    }

There is one tapset defined per target arch.

* Makefile: Generate a qemu.stp file for systemtap
* tracetool: Support for generating systemtap tapsets

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-16 09:31:18 -06:00
Jes Sorensen b152aa84d5 Consolidate oom_check() functions
This consolidates the duplicated oom_check() functions, as well as
splitting them into OS dependant versions to avoid the #ifdef
grossness that was present in the old osdep.c version.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-10-30 08:02:39 +00:00
Anthony Liguori 48f57044e6 Merge remote branch 'qmp/for-anthony' into staging 2010-10-05 13:54:49 -05:00
Andreas Färber aff447c916 Haiku doesn't have libm
Math functions are integrated into Haiku's libroot.

Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-10-03 06:31:21 +00:00
Luiz Capitulino acd0a09337 Monitor: Rename the qemu-monitor.hx file
Let's be consistent and call it hmp-commands.hx, so that we have
qmp-commands.hx for QMP and hmp-commands.hx for HMP.

Please, note that this commit doesn't touch qemu-monitor.texi. All
texi files have the qemu- prefix and I don't think it's worth
changing that.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-10-01 10:20:07 -03:00
Luiz Capitulino f36b4afba9 QMP: Introduce command dispatch table
Also update QMP functions to use it. The table is generated
from the qmp-commands.hx file.

From now on, QMP and HMP have different command dispatch
tables.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-10-01 10:20:06 -03:00
Edgar E. Iglesias 2c50e26efd powerpc: Add a virtex5 ml507 refdesign board
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2010-09-30 18:53:30 +02:00
Stefan Hajnoczi 94a420b170 trace: Add trace-events file for declaring trace events
This patch introduces the trace-events file where trace events can be
declared like so:

qemu_malloc(size_t size) "size %zu"
qemu_free(void *ptr) "ptr %p"

These trace event declarations are processed by a new tool called
tracetool to generate code for the trace events.  Trace event
declarations are independent of the backend tracing system (LTTng User
Space Tracing, ftrace markers, DTrace).

The default "nop" backend generates empty trace event functions.
Therefore trace events are disabled by default.

The trace-events file serves two purposes:

1. Adding trace events is easy.  It is not necessary to understand the
   details of a backend tracing system.  The trace-events file is a
   single location where trace events can be declared without code
   duplication.

2. QEMU is not tightly coupled to one particular backend tracing system.
   In order to support tracing across QEMU host platforms and to
   anticipate new backend tracing systems that are currently maturing,
   it is important to be flexible and not tied to one system.

This commit includes fixes from Prerna Saxena
<prerna@linux.vnet.ibm.com> and Blue Swirl <blauwirbel@gmail.com>.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2010-09-09 16:22:44 -05:00
Hollis Blanchard 52ba784d35 Fix "make install" with a cross toolchain
We must be able to use a non-native strip executable, but not all
versions of 'install' support the --strip-program option (e.g.
OpenBSD). Accordingly, we can't use 'install -s', and we must run strip
separately.

Signed-off-by: Hollis Blanchard <hollis@penguinppc.org>
Cc: blauwirbel@gmail.com
2010-08-26 18:18:26 +02:00
Cam Macdonell 3dcbf8f9ca Disable build of ivshmem on non-KVM systems
Signed-off-by: Cam Macdonell <cam@cs.ualberta.ca>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-15 09:44:53 +00:00
Cam Macdonell 6cbf4c8c64 RESEND: Inter-VM shared memory PCI device
resend for bug fix related to removal of irqfd

Support an inter-vm shared memory device that maps a shared-memory object as a
PCI device in the guest.  This patch also supports interrupts between guest by
communicating over a unix domain socket.  This patch applies to the qemu-kvm
repository.

    -device ivshmem,size=<size in format accepted by -m>[,shm=<shm name>]

Interrupts are supported between multiple VMs by using a shared memory server
by using a chardev socket.

    -device ivshmem,size=<size in format accepted by -m>[,shm=<shm name>]
           [,chardev=<id>][,msi=on][,ioeventfd=on][,vectors=n][,role=peer|master]
    -chardev socket,path=<path>,id=<id>

The shared memory server, sample programs and init scripts are in a git repo here:

    www.gitorious.org/nahanni

Signed-off-by: Cam Macdonell <cam@cs.ualberta.ca>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-10 16:25:16 -05:00
Corentin Chary efe556adb7 vnc: tight add PNG encoding
Introduce a new encoding: VNC_ENCODING_TIGHT_PNG [1] (-269) with a new
tight filter VNC_TIGHT_PNG (0x0A). When the client tells it supports the Tight PNG
encoding, the server will use tight, but will always send encoding pixels using
PNG instead of zlib. If the client also told it support JPEG, then the server can
send JPEG, because PNG will only be used in the cases zlib was used in normal tight.

This encoding was introduced to speed up HTML5 based VNC clients like noVNC [2], but
can also be used on devices like iPhone where PNG can be rendered in hardware.

[1] http://wiki.qemu.org/VNC_Tight_PNG
[2] http://github.com/kanaka/noVNC/

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-26 17:36:14 -05:00
Corentin Chary 2f6f5c7a00 vnc: tight: add JPEG and gradient subencoding with smooth image detection
Add gradient filter and JPEG compression with an heuristic to detect how
lossy the comppression will be. This code has been adapted from
libvncserver/tight.c.

JPEG support can be enabled/disabled at compile time with --enable-vnc-jpeg
and --disable-vnc-jpeg.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-26 17:23:53 -05:00
Alexander Graf 1ddda5cd36 AppleSMC device emulation
Intel Macs have a chip called the "AppleSMC" which they use to control
certain Apple specific parts of the hardware, like the keyboard background
light.

That chip is also used to store a key that Mac OS X uses to decrypt binaries.

This patch adds emulation for that chip, so we're getting one step further
to having Mac OS X run natively on Qemu.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-11 20:33:10 +03:00
Blue Swirl 08af49da7e piix4: compile only once
Compile piix4 in hwlib. Two compilations less for the full build.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-03 06:49:47 +00:00
cmchao 02d7434111 hw/omap1.c : separate uart module
Signed-off-by: cmchao <cmchao@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 20:41:37 +02:00
cmchao 2c1d9ecb22 hw/omwp2.c : separate l4 interconnect module
Signed-off-by: cmchao <cmchao@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 20:41:37 +02:00
cmchao cc9577cfb7 hw/omap2.c : separate tap module(Test-Chip-level)
Signed-off-by: cmchao <cmchao@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 20:41:37 +02:00
cmchao 2d08cc7c3f hw/omap2.c : separate spi module
Signed-off-by: cmchao <cmchao@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 20:41:37 +02:00
cmchao 7f132a21fc hw/omap1.c : separate interrupt controller module
Signed-off-by: cmchao <cmchao@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 20:41:37 +02:00
cmchao 0bf4301600 hw/omap2.c : separate sdrc (sdram controller)
Signed-off-by: cmchao <cmchao@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 20:41:36 +02:00
cmchao f3354b0e5d hw/omap2.c : separate gpmc(general purpose memory controller)
Signed-off-by: cmchao <cmchao@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 20:41:36 +02:00
cmchao 011d87d033 hw/omap2.c : separate synctimer module
Signed-off-by: cmchao <cmchao@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 20:41:36 +02:00
cmchao c58d37cfdc hw/omap2.c : separate gptimer module
Signed-off-by: cmchao <cmchao@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 20:41:36 +02:00
cmchao e5c6b25a14 hw/omap1.c : separate gpio module
Signed-off-by: cmchao <cmchao@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 20:41:35 +02:00
Huacai Chen 051c190bce MIPS: Initial support of fulong mini pc (machine construction)
Signed-off-by: Huacai Chen <zltjiangshi@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-29 23:07:52 +02:00
Huacai Chen edf79e66c0 Initial support of vt82686b south bridge used by fulong mini pc
Signed-off-by: Huacai Chen <zltjiangshi@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-29 23:07:51 +02:00
Huacai Chen d0f7453d13 MIPS: Initial support of bonito north bridge used by fulong mini pc
Signed-off-by: Huacai Chen <zltjiangshi@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-29 23:07:51 +02:00
Venkateswararao Jujjuri (JV) 758e8e38eb virtio-9p: Make infrastructure for the new security model.
This patch adds required infrastructure for the new security model.

- A new configure option for attr/xattr.
- if CONFIG_VIRTFS will be defined if both CONFIG_LINUX and CONFIG_ATTR defined.
- Defines routines related to both security models.

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-06-22 15:15:50 -05:00
Edgar E. Iglesias 77d4f95e11 cris: Break out image loading to hw/cris-boot.c.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@axis.com>
2010-06-10 14:45:46 +02:00
Richard Henderson 680c877af4 linux-user: Use qemu-malloc.c.
Since we're no longer setting PAGE_RESERVED, there's no need to
implement qemu_malloc via mmap.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-28 23:27:19 +02:00
Blue Swirl 4556bd8b25 Compile dma only once
Use a qemu_irq to request CPU exit.

7 compilations less for the full build.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-22 08:00:52 +00:00
Blue Swirl 956a3e6bb7 Compile pckbd only once
Use a qemu_irq to indicate A20 line changes. Move I/O port 92
to pckbd.c.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-22 07:59:01 +00:00
Blue Swirl c69ea0dff2 Compile acpi_piix4, apm and pm_smbus only once
12 compilations less for the full build.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-17 19:32:37 +00:00
Isaku Yamahata 845773ab03 pc: split out piix specific part from pc.c into pc_piix.c
Finally, we can safely split out the piix specific part from pc.c
into pc_piix.c.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15 15:53:25 +00:00
Isaku Yamahata 93d89f63e5 acpi: split acpi.c into the common part and the piix4 part.
Split acpi.c into the common part and the piix4 specific part.
The common part will be used later.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15 15:30:49 +00:00
Isaku Yamahata 04762841d8 acpi: split out apm register emulation from acpi.c
Split out apm register emulation for acpi.c into apm.c.
The apm emulation will be used later.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15 15:27:19 +00:00
Isaku Yamahata fc0bdd995c acpi: split out piix4 smbus routines from acpi.c into pm_smbus.c
Split out piix4 smbus routines from acpi.c into pm_smbus.c and
use it.
The split out smbus emulation will be used later.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15 15:25:31 +00:00
Blue Swirl d08555c17a Compile virtio-9p-debug and virtio-9p-local once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-14 19:31:53 +00:00
Jan Kiszka 0e1a275bd4 Add KVM CFLAGS to vhost build
The configure test of vhost uses KVM CFLAGS, so the build must use them
as well. Otherwise we specifically miss what --kerneldir provides.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-05-03 12:39:12 -05:00
Anthony Liguori 9f10751365 virtio-9p: Add a virtio 9p device to qemu
This patch doesn't implement the 9p protocol handling
code. It adds a simple device which dump the protocol data.

[jvrao@linux.vnet.ibm.com: Little-Endian to host format conversion]
[aneesh.kumar@linux.vnet.ibm.com: Multiple-mounts support]

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-05-03 12:17:37 -05:00
Richard Henderson 6495a04457 linux-user: Remove ELFLOAD32.
The ABI-specific types used by linux_binprm and image_info
are different after forcing TARGET_ABI32 on.  Which means
that the parameters that load_elf_binary_multi sees are not
those that loader_exec passed.  This is inherently broken
and is more trouble than it's worth fixing.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-25 12:59:30 +00:00
Blue Swirl d3538b45ea Compile event_notifier only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-19 19:47:49 +00:00
Blue Swirl 04c9a0cbc2 Compile vl.c once
Since kvm.h can be used in files compiled once,
we can partially revert
b33612d035.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-19 19:46:13 +00:00
Paolo Bonzini 98c8573eb3 provide a stub version of kvm-all.c if !CONFIG_KVM
This allows limited use of kvm functions (which will return ENOSYS)
even in once-compiled modules.  The patch also improves a bit the error
messages for KVM initialization.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[blauwirbel@gmail.com: fixed Win32 build]
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-19 18:59:30 +00:00
Paolo Bonzini 28c2897373 move balloon handling to balloon.c
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-09 18:55:56 +02:00
Alexander Graf e9d0fc7463 Make virtio-pci building conditional again
Commit b305b9d7d6 made building of virtio-pci
conditional and not enabled on S390x, because it collides with the S390 bus.

Commit 087431d1d1 accidentially reverted that
behavior, breaking S390x again.

So here's a follow-up patch disabling building of virtio-pci on S390x again.

This unbreaks the S390x target.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-08 21:49:15 +02:00
Paul Brook a67ba3b6f8 Revert "Compile usb-ohci only once"
This reverts commit f1698408f1.

PCI is always little-endian. Having a user-visible "be" property is just
plain wrong.
2010-04-04 21:18:26 +01:00
Blue Swirl 240566908f sparc32: rename iommu.c to sun4m_iommu.c to make room for other IOMMUs
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-03 07:35:50 +00:00
Michael S. Tsirkin d59700553e vhost: vhost net support
This adds vhost net device support in qemu. Will be tied to tap device
and virtio by following patches.  Raw backend is currently missing,
will be worked on/submitted separately.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-01 13:56:43 -05:00
Michael S. Tsirkin 2292b33986 notifier: event notifier implementation
event notifiers are slightly generalized eventfd descriptors. Current
implementation depends on eventfd because vhost is the only user, and
vhost depends on eventfd anyway, but a stub is provided for non-eventfd
case.

We'll be able to further generalize this when another user comes along
and we see how to best do this.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-01 13:56:43 -05:00
Anthony Liguori 087431d1d1 virtio-pci: compile per-target
With vhost, virtio-pci needs to include kvm.h and kvm.h needs to be built
per-target.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-01 13:56:19 -05:00
Anthony Liguori b33612d035 Fix -enable-kvm
Make vl.o compiled per target and fix a thinko in hw/acpi.c.  It's not trivial
to make kvm.h consumable by compiled-once files.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-01 09:58:48 -05:00
Blue Swirl 2b5eb37123 Compile most PPC devices only once
Make byte swapping unconditional since PPC is big endian.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-30 17:36:23 +00:00
Blue Swirl add85a76bb Compile prep_pci only once
Make byte swapping unconditional since PPC is big endian.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29 19:24:04 +00:00
Blue Swirl 29e922b61f Compile qemu-timer only once
Arrange various declarations so that also non-CPU code can access
them, adjust users.

Move CPU specific code to cpus.c.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29 19:24:00 +00:00
Blue Swirl 5c4532ee78 Compile openpic only once
Replace TARGET_PAGE_SIZE with 4096. Make byte swapping unconditional
since PPC is big endian.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29 19:23:59 +00:00
Blue Swirl 02c7c992f0 Compile ide/macio only once
Replace TARGET_PAGE_SIZE with 4096. Make byte swapping unconditional
since PPC is big endian.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29 19:23:57 +00:00
Blue Swirl 3d08ff698b Compile pflash_cfi01 only once
Push TARGET_WORDS_BIGENDIAN dependency to board level.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29 19:23:56 +00:00
Blue Swirl 5f9fc5ad7e Compile pflash_cfi02 only once
Push TARGET_WORDS_BIGENDIAN dependency to board level.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29 19:23:55 +00:00
Blue Swirl 53b67b3052 Compile acpi only once
Use qemu_irqs to trigger CMOS S3 and SMI events.

Avoid using kvm.h, which uses CPUState.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29 19:23:52 +00:00
Blue Swirl ad96090a01 Refactor target specific handling, compile vl.c only once
Move target specific functions and RAM handling to arch_init.c.

Add a flag to QEMUOptions structure to indicate for which
architectures the option is allowed, check the flag
in run time and remove conditional code in option handling.

Now that no target dependencies remain, compile vl.c only once
for all targets.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29 19:23:52 +00:00
Blue Swirl 296af7c952 Refactor CPUState handling out of vl.c
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29 19:23:50 +00:00
Blue Swirl 57448a975e Compile vmware_vga only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-27 18:18:17 +00:00
Blue Swirl b970ea8f8d Compile some MIPS devices only once
Move CPU specific declarations to a separate file.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-27 07:26:16 +00:00
Blue Swirl f7736b91c4 Compile ide/core only once
Make win2k install hack unconditional as it is still restricted to
x86 only in vl.c.

Replace TARGET_PAGE_SIZE and 4096 with PAGE_SIZE.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-27 06:20:53 +00:00
Blue Swirl 8f51bdab44 Compile virtio-pci only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-22 20:18:58 +00:00
Blue Swirl 70615c38de Compile sound devices only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-22 20:18:40 +00:00
Blue Swirl 952760bb7b Compile pci_host only once
Convert pci_host_conf_register_mmio_noswap(x) to
pci_host_conf_register_mmio(x, 0).

Convert pci_host_conf_register_mmio(x) to
pci_host_conf_register_mmio(x, 1) for big endian hosts, all cases
happen to be BE.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:15 +00:00
Blue Swirl c1f63a9d43 Compile pcie_host only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:14 +00:00
Blue Swirl 6842a08ee0 Compile pci only once
Move coalesced_mmio declarations to a more accessible location.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:13 +00:00
Blue Swirl f1698408f1 Compile usb-ohci only once
Push TARGET_WORDS_BIGENDIAN dependency to board level.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:12 +00:00
Blue Swirl 2d48377a85 Compile serial only once
Push TARGET_WORDS_BIGENDIAN dependency to board level.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:11 +00:00
Blue Swirl d3ffc7a6e7 Compile ne2000_isa only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:10 +00:00
Blue Swirl 84108e128e Compile isa_mmio only once
Push TARGET_WORDS_BIGENDIAN dependency to board level.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:09 +00:00
Blue Swirl 7161e5710b Compile most PCI network cards only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:08 +00:00
Blue Swirl e1060e9d2d Compile qemu-error only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:07 +00:00
Blue Swirl 64dc9c31ae Compile async only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:07 +00:00
Blue Swirl 35da37e141 Compile fdc only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:06 +00:00
Blue Swirl 9953b2fc28 Compile most IDE devices only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:05 +00:00
Blue Swirl 4c65f1e5ba Compile usb-uhci only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:04 +00:00
Blue Swirl 7f55c7ced6 Compile vga-isa only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:03 +00:00
Blue Swirl 7109371158 Compile pcspk only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:02 +00:00
Blue Swirl df6327780d Compile i8254 only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:02 +00:00