Commit Graph

923 Commits

Author SHA1 Message Date
Edgar E. Iglesias 448293961f Merge remote branch 'rth/axp-next' into alpha-merge
* rth/axp-next: (26 commits)
  target-alpha: Implement TLB flush primitives.
  target-alpha: Use a fixed frequency for the RPCC in system mode.
  target-alpha: Trap for unassigned and unaligned addresses.
  target-alpha: Remap PIO space for 43-bit KSEG for EV6.
  target-alpha: Implement cpu_alpha_handle_mmu_fault for system mode.
  target-alpha: Implement more CALL_PAL values inline.
  target-alpha: Disable interrupts properly.
  target-alpha: All ISA checks to use TB->FLAGS.
  target-alpha: Swap shadow registers moving to/from PALmode.
  target-alpha: Implement do_interrupt for system mode.
  target-alpha: Add IPRs to be used by the emulation PALcode.
  target-alpha: Use kernel mmu_idx for pal_mode.
  target-alpha: Add various symbolic constants.
  target-alpha: Use do_restore_state for arithmetic exceptions.
  target-alpha: Tidy up arithmetic exceptions.
  target-alpha: Tidy exception constants.
  target-alpha: Enable the alpha-softmmu target.
  target-alpha: Rationalize internal processor registers.
  target-alpha: Merge HW_REI and HW_RET implementations.
  target-alpha: Cleanup MMU modes.
  ...
2011-06-10 22:21:14 +02:00
Anthony Liguori 93e0597ef9 Merge remote-tracking branch 'jvrao/for-anthony' into staging 2011-06-08 12:15:43 -05:00
Jan Kiszka 7665385a85 virtio: Move virtio-pci to hw library
This module has no target dependencies (except for target_phys_addr_t
size) and can thus be built as part of libhw.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-06-08 09:11:31 +01:00
Glauber Costa a90d469007 Add an isa device for SGA
This patch adds a dummy legacy ISA device whose responsibility is to
deploy sgabios, an option rom for a serial graphics adapter.
The proposal is that this device is always-on when -nographics,
but can otherwise be enable in any setup when -device sga is used.

[v2: suggestions on qdev by Markus ]
[v3: cleanups and documentation, per list suggestions ]

Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-06-07 13:52:30 -05:00
Aurelien Jarno cf67c6bad5 softfloat-native: remove
Remove softfloat-native support, all targets are now using softfloat
instead.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-06-03 16:07:51 +02:00
Stefan Weil 873c321393 virtio-9p: Use relative includes for files in hw
Commit 353ac78d49 moved the files
without fixing the include paths. It used a modified CFLAGS
to add hw to the include search path, but this breaks builds
where the user wants to set special CFLAGS. Long include paths
also increase compilation time.

Therefore this patch removes the special CFLAGS for virtio
and fixes the include statements by using relative include paths.

v2: Remove special CFLAGS.
v3: Update needed for latest QEMU.

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Venkateswararao Jujjuri (JV) <jvrao@linux.vnet.ibm.com>
2011-06-01 10:25:03 -07:00
Aneesh Kumar K.V f4f61d272e virtio-9p: Move device specific code to virtio-9p-device
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri (JV) <jvrao@linux.vnet.ibm.com>
2011-06-01 10:24:50 -07:00
Richard Henderson b758aca1f6 target-alpha: Enable the alpha-softmmu target.
With all of the pre-existing code that would not compile gone,
this is the earliest point at which the target can be enabled.

There is no machine defined yet, so this will crash on startup.
Enable the target anyway, to make sure that further compilation
problems do not creep back in.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-05-31 10:18:05 -07:00
Richard Henderson 352e48b0f4 target-alpha: Remove partial support for palcode emulation.
This code does not work, and will be replaced by a bios image.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-05-31 10:18:04 -07:00
Blue Swirl 42a623c7db Move user emulator stuff from cpu-exec.c to user-exec.c
Simplify cpu-exec.c by refactoring.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-05-28 06:26:00 +00:00
Jun Nakajima 432d268c05 xen: Introduce the Xen mapcache
On IA32 host or IA32 PAE host, at present, generally, we can't create
an HVM guest with more than 2G memory, because generally it's almost
impossible for Qemu to find a large enough and consecutive virtual
address space to map an HVM guest's whole physical address space.
The attached patch fixes this issue using dynamic mapping based on
little blocks of memory.

Each call to qemu_get_ram_ptr makes a call to qemu_map_cache with the
lock option, so mapcache will not unmap these ram_ptr.

Blocks that do not belong to the RAM, but usually to a device ROM or to
a framebuffer, are handled in a separate function. So the whole RAMBlock
can be map.

Signed-off-by: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08 10:10:01 +02:00
Anthony PERARD 3285cf4fe7 xen: Add initialisation of Xen
The xenpv machine use the common init function.

Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08 10:10:00 +02:00
Anthony PERARD ce6bc29458 xen: Make Xen build once.
xen_domainbuild and xen_machine_pv are built only for i386 targets.

Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08 10:09:59 +02:00
Michael Walle 57aa265d46 lm32: add Milkymist Minimac2 support
This patch adds support for Milkymist's minimal Ethernet MAC v2. It
superseds minimac1.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-05-03 10:48:40 +02:00
Aneesh Kumar K.V 353ac78d49 virtio-9p: move 9p files around
Now that we start adding more files related to 9pfs
it make sense to move them to a separate directory

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2011-04-27 08:24:37 -07:00
Dmitry Eremin-Solenikov c64b21d519 Basic implementation of Sharp Zaurus SL-5500 collie PDA
Add very basic implementation of collie PDA emulation. The system lacks
LoCoMo and graphics/sound emulation. Linux kernel boots up to mounting
rootfs (theoretically it can be provided in pflash images).

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-20 12:59:15 +02:00
Dmitry Eremin-Solenikov 5bc95aa246 Implement basic part of SA-1110/SA-1100
Basic implementation of DEC/Intel SA-1100/SA-1110 chips emulation.
Implemented:
 - IRQs
 - GPIO
 - PPC
 - RTC
 - UARTs (no IrDA/etc.)
 - OST reused from pxa25x

Everything else is TODO (esp. PM/idle/sleep!) - see the todo in the
hw/strongarm.c

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-20 12:59:15 +02:00
Peter Maydell 348883d482 Makefile.target: Allow target helpers to be in any *_helper.c file
Build all files matching *_helper.c with HELPER_CFLAGS, not just
op_helper.c. This allows you to put target helper functions which
use the global 'env' variable in multiple source files.

This only affects the ARM target as all the other targets currently only
have op_helper.c.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-04 20:18:06 +02:00
Michael Walle 5052d2277f lm32: add support for the Milkymist board
This patch adds almost complete support for the Milkymist system-on-chip
(http://www.milkymist.org).

Additional to running bare metal applications, booting a linux kernel with
initrd is supported.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04 10:26:54 +02:00
Michael Walle d23948b15a lm32: add Milkymist VGAFB support
This patch adds support for Milkymist's VGA framebuffer.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04 10:26:53 +02:00
Michael Walle 883de16b46 lm32: add Milkymist UART support
This patch adds support for Milkymist's simple UART.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04 10:26:53 +02:00
Michael Walle 0670dadd64 lm32: add Milkymist TMU2 support
This patch adds support for Milkymist's texture mapping unit. For fast
computation this model needs hardware accelerated 3D graphics support
(OpenGL). There is no graphical output, all computations belong to internal
framebuffers only.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04 10:26:53 +02:00
Michael Walle 9683242448 lm32: add Milkymist System Controller support
This patch adds support for Milkymist's System Controller core. The model
has the following features:
 - support for shutting down and restarting the board
 - provide two timers and GPIO
 - provide registers for system identification and reading the boards
   capabilities

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04 10:26:53 +02:00
Michael Walle 87a381ec34 lm32: add Milkymist SoftUSB support
This patch adds support for Milkymist's SoftUSB core. This model differ
from the real hardware in its functionality. The real hardware consits of a
tiny freely programmable microcontroller which controls the USB ports. For
simplicity reasons, this model emulates only keyboard and mouse input
devices, eg. input events translates directly to the corresponding expected
messages.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04 10:26:53 +02:00
Michael Walle 5ee18b9c68 lm32: add Milkymist PFPU support
This patch adds support for Milkymist's Programmable FPU.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04 10:26:53 +02:00
Michael Walle 0742454485 lm32: add Milkymist Minimac support
This patch adds support for Milkymist's minimal Ethernet MAC.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04 10:26:53 +02:00
Michael Walle b4e37d9856 lm32: add Milkymist memory card support
This patch adds support for Milkymist's memory card core.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04 10:26:53 +02:00
Michael Walle e4dc6d2cdc lm32: add Milkymist HPDMC support
This patch adds support for the Milkymist's High Performance Dynamic Memory
Controller. This is just a dumb model without any functionality. While the
real hardware acts for example as a bridge between software and hardware
for sending SDRAM commans, this model will only eat up these commands and
always returns the expected hardware states, eg. PLL locked etc.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04 10:26:53 +02:00
Michael Walle 25a8bb96f4 lm32: add Milkymist AC97 support
This patch adds support for the Milkymist AC97 compatible sound output and
input core.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04 10:26:53 +02:00
Alexander Graf 1b01b4e717 Only build ivshmem when CONFIG_PCI && CONFIG_KVM
The ivshmem depends on PCI and KVM, not only KVM. Reflect this
in the Makefile, so we don't get build errors on s390x.

Signed-off-by: Alexander Graf <agraf@suse.de>
CC: Cam Macdonell <cam@cs.ualberta.ca>
CC: Juan Quintela <quintela@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-04 00:34:08 +02:00
Peter Maydell 2055283bcc hw/vexpress.c: Add model of ARM Versatile Express board
Add a model of the ARM Versatile Express board (with A9MPx4
daughterboard).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-03 18:04:36 +02:00
Robert Relyea 111a38b018 libcacard: initial commit
libcacard emulates a Common Access Card (CAC) which is a standard
for smartcards. It is used by the emulated ccid card introduced in
a following patch. Docs are available in docs/libcacard.txt

Signed-off-by: Alon Levy <alevy@redhat.com>

---

changes from v24->v25:
 * Fix out of tree builds.
 * Fix build with linux-user targets.

changes from v23->v24: (Jes Sorensen review 2)
 * Makefile.target: use obj-$(CONFIG_*) +=
 * remove unrequired includes, include qemu-common before qemu-thread
  * required adding #define NO_NSPR_10_SUPPORT (harmless)

changes from v22->v23:
 * configure fixes: (reported by Stefan Hajnoczi)
  * test a = b, not a == b (second isn't portable)
  * quote $source_path in case it contains spaces
   - this doesn't really help since there are many other places
     that need similar fixes, not introduced by this patch.

changes from v21->v22:
 * fix configure to not link libcacard if nss not found
    (reported by Stefan Hajnoczi)
 * fix vscclient linkage with simpletrace backend
    (reported by Stefan Hajnoczi)
 * card_7816.c: add missing break in ERROR_DATA_NOT_FOUND
    (reported by William van de Velde)

changes from v20->v21: (Jes Sorensen review)
 * use qemu infrastructure: qemu-thread, qemu-common (qemu_malloc
  and qemu_free), error_report
 * assert instead of ASSERT
 * cosmetic fixes
 * use strpbrk and isspace
 * add --disable-nss --enable-nss here, instead of in the final patch.
 * split vscclient, passthru and docs to following patches.

changes from v19->v20:
 * checkpatch.pl

changes from v15->v16:

Build:
 * don't erase self with distclean
 * fix make clean after make distclean
 * Makefile: make vscclient link quiet

Behavioral:
 * vcard_emul_nss: load coolkey in more situations
 * vscclient:
  * use hton,ntoh
  * send init on connect, only start vevent thread on response
  * read payload after header check, before type switch
  * remove Reconnect
  * update for vscard_common changes, empty Flush implementation

Style/Whitespace:
 * fix wrong variable usage
 * remove unused variable
 * use only C style comments
  * add copyright header
  * fix tabulation

Signed-off-by: Alon Levy <alevy@redhat.com>

libcacard: fix out of tree builds
2011-04-01 19:07:48 -05:00
Ben Herrenschmidt 6e270446d0 Implement PAPR virtual SCSI interface (ibmvscsi)
This patch implements the infrastructure and hypercalls necessary for
the PAPR specified Virtual SCSI interface.  This is the normal method
for providing (virtual) disks to PAPR partitions.

Signed-off-by: Ben Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 18:34:57 +02:00
David Gibson 8d90ad9005 Implement sPAPR Virtual LAN (ibmveth)
This patch implements the PAPR specified Inter Virtual Machine Logical
LAN; that is the virtual hardware used by the Linux ibmveth driver.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 18:34:56 +02:00
David Gibson b5cec4c5f2 Implement the PAPR (pSeries) virtualized interrupt controller (xics)
PAPR defines an interrupt control architecture which is logically divided
into ICS (Interrupt Control Presentation, each unit is responsible for
presenting interrupts to a particular "interrupt server", i.e. CPU) and
ICS (Interrupt Control Source, each unit responsible for one or more
hardware interrupts as numbered globally across the system).  All PAPR
virtual IO devices expect to deliver interrupts via this mechanism.  In
Linux, this interrupt controller system is handled by the "xics" driver.

On pSeries systems, access to the interrupt controller is virtualized via
hypercalls and RTAS methods.  However, the virtualized interface is very
similar to the underlying interrupt controller hardware, and similar PICs
exist un-virtualized in some other systems.

This patch implements both the ICP and ICS sides of the PAPR interrupt
controller.  For now, only the hypercall virtualized interface is provided,
however it would be relatively straightforward to graft an emulated
register interface onto the underlying interrupt logic if we want to add
a machine with a hardware ICS/ICP system in the future.

There are some limitations in this implementation: it is assumed for now
that only one instance of the ICS exists, although a full xics system can
have several, each responsible for a different group of hardware irqs.
ICP/ICS can handle both level-sensitve (LSI) and message signalled (MSI)
interrupt inputs.  For now, this implementation supports only MSI
interrupts, since that is used by PAPR virtual IO devices.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 18:34:56 +02:00
David Gibson 39ac845510 Implement hcall based RTAS for pSeries machines
On pSeries machines, operating systems can instantiate "RTAS" (Run-Time
Abstraction Services), a runtime component of the firmware which implements
a number of low-level, infrequently used operations.  On logical partitions
under a hypervisor, many of the RTAS functions require hypervisor
privilege.  For simplicity, therefore, hypervisor systems typically
implement the in-partition RTAS as just a tiny wrapper around a hypercall
which actually implements the various RTAS functions.

This patch implements such a hypercall based RTAS for our emulated pSeries
machine.  A tiny in-partition "firmware" calls a new hypercall, which
looks up available RTAS services in a table.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 18:34:56 +02:00
David Gibson 4040ab7237 Implement the bus structure for PAPR virtual IO
This extends the "pseries" (PAPR) machine to include a virtual IO bus
supporting the PAPR defined hypercall based virtual IO mechanisms.

So far only one VIO device is provided, the vty / vterm, providing
a full console (polled only, for now).

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 18:34:55 +02:00
David Gibson 9fdf0c2995 Start implementing pSeries logical partition machine
This patch adds a "pseries" machine to qemu.  This aims to emulate a
logical partition on an IBM pSeries machine, compliant to the
"PowerPC Architecture Platform Requirements" (PAPR) document.

This initial version is quite limited, it implements a basic machine
and PAPR hypercall emulation.  So far only one hypercall is present -
H_PUT_TERM_CHAR - so that a (write-only) console is available.

Multiple CPUs are permitted, with SMP entry handled kexec() style.

The machine so far more resembles an old POWER4 style "full system
partition" rather than a modern LPAR, in that the guest manages the
page tables directly, rather than via hypercalls.

The machine requires qemu to be configured with --enable-fdt.  The
machine can (so far) only be booted with -kernel - i.e. no partition
firmware is provided.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 18:34:55 +02:00
Michal Simek 00914b7d97 microblaze: Add PetaLogix ml605 MMU little-endian ref design
Add the first Microblaze little endian platform.
Platform uses uart16550, axi ethernet, timer, intc.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
2011-03-16 15:18:58 +01:00
Edgar E. Iglesias 93f1e4016b xilinx: Add AXIENET & DMA models
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
2011-03-16 15:18:58 +01:00
Michael Walle d821732aba lm32: EVR32 and uclinux BSP
This patch adds support for the following two BSPs:
 - LM32 EVR32 BSP (as used by RTEMS)
 - uclinux BSP by Theobroma Systems

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-03-07 13:42:37 +01:00
Michael Walle f19410ca69 lm32: system control model
This patch add support for a system control block. It is supposed to
act as helper for the emulated program. E.g. shutting down the VM or
printing test results. This model is intended for testing purposes only and
doesn't fit to any real hardware. Therefore, it is not added to any board
by default. Instead a user has to add it explicitly with the '-device'
commandline parameter.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-03-07 13:42:37 +01:00
Michael Walle 770ae5713a lm32: uart model
This patch add support for the LatticeMico32 UART.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-03-07 13:42:36 +01:00
Michael Walle ea7924dcc4 lm32: timer model
This patch adds support for the LatticeMico32 system timer.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-03-07 13:42:36 +01:00
Michael Walle 15d7dc4f80 lm32: juart model
This patch adds the JTAG UART model. It is accessed through special control
registers and opcodes. Therefore the translation uses callbacks to this
model.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-03-07 13:42:36 +01:00
Michael Walle 4ef66fa718 lm32: interrupt controller model
This patch adds the interrupt controller of the lm32. Because the PIC is
accessed through special control registers and opcodes, there are callbacks
from the lm32 translation code to this model.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-03-07 13:42:36 +01:00
Michael Walle 81ea0e1304 LatticeMico32 target support
This patch adds support for the LatticeMico32 softcore processor by Lattice
Semiconductor.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-03-07 13:42:36 +01:00
Blue Swirl 1c9c5fcdfe applesmc: make optional
Based on patch by David Ahern.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-20 09:34:16 +00:00
Jan Kiszka 0ec329dab9 kvm: x86: Introduce kvmclock device to save/restore its state
If kvmclock is used, which implies the kernel supports it, register a
kvmclock device with the sysbus. Its main purpose is to save and restore
the kernel state on migration, but this will also allow to visualize it
one day.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
CC: Glauber Costa <glommer@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-02-14 12:43:09 -02:00
Blue Swirl dd703b991c hpet: make optional
Ignore failure with hpet device creation.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-12 09:45:06 +00:00
Blue Swirl 86d864140b x86: make vmmouse optional
Compile vmmouse in hwlib. Ignore failure if vmmouse device can't be
created.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-12 09:43:44 +00:00
Mike Frysinger c3109ba1b1 linux-user/FLAT: allow targets to override FLAT processing
This brings flatload.c more in line with the current Linux FLAT loader
which allows targets to handle various FLAT aspects in their own way.
For the common behavior, the new functions get stubbed out.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
2011-02-09 10:33:54 +02:00
Fabien Chouteau b04d989054 SPARC: Emulation of Leon3
Leon3 is an open-source VHDL System-On-Chip, well known in space industry (more
information on http://www.gaisler.com).

Leon3 is made of multiple components available in the GrLib VHDL library.
Three devices are implemented: uart, timers and IRQ manager.
You can find code for these peripherals in the grlib_* files.

Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-24 20:54:34 +00:00
Blue Swirl 4c3b5a4891 Add scripts directory
Move build and user scripts into scripts directory.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-20 20:54:21 +00:00
Anthony Liguori a7bd621d7a Merge remote branch 'mst/for_anthony' into staging 2011-01-10 10:32:01 -06:00
Aurelien Jarno 818c2e1b97 Merge branch 'spice.v23.pull' of git://anongit.freedesktop.org/spice/qemu
* 'spice.v23.pull' of git://anongit.freedesktop.org/spice/qemu:
  vnc/spice: add set_passwd monitor command.
  vnc: support password expire
  vnc: auth reject cleanup
  spice: add qmp 'query-spice' and hmp 'info spice' commands.
  spice: connection events.
  spice: add qxl device
  spice: add qxl vgabios binary.
2010-12-27 22:59:48 +01:00
Isaku Yamahata b3a29fd560 build, pci: remove QMP dependency on core PCI code
by introducing pci-stub.c, eliminate QMP dependency on core PCI code
rquired by query-pci command.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-12-22 13:06:24 +02:00
Alexander Graf 3455749191 usb_ohci: Always use little endian
This patch replaces explicit bswaps with endianness hints to the
mmio layer.

Because we don't depend on the target endianness anymore, we can also
move the driver over to Makefile.objs.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11 15:24:26 +00:00
Alexander Graf 5cf7a3ca5b rtl8139: Declare as little endian
This patch replaces explicit bswaps with endianness hints to the
mmio layer.

Because we don't depend on the target endianness anymore, we can also
move the driver over to Makefile.objs.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11 15:24:26 +00:00
Alexander Graf 32600a309f e1000: Make little endian
The e1000 has compatibility code to handle big endianness which makes it
mandatory to be recompiled on different targets.

With the generic mmio endianness solution, there's no need for that anymore.
We just declare all mmio to be little endian and call it a day.

Because we don't depend on the target endianness anymore, we can also
move the driver over to Makefile.objs.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11 15:24:26 +00:00
Gerd Hoffmann a19cbfb346 spice: add qxl device
qxl is a paravirtual graphics card.  The qxl device is the bridge
between the guest and the spice server (aka libspice-server).  The
spice server will send the rendering commands to the spice client, which
will actually render them.

The spice server is also able to render locally, which is done in case
the guest wants read something from video memory.  Local rendering is
also used to support display over vnc and sdl.

qxl is activated using "-vga qxl".  qxl supports multihead, additional
cards can be added via '-device qxl".

[ v2: add copyright to files                     ]
[ v2: use qemu-common.h for standard includes    ]
[ v2: create separate qxl-vga device for primary ]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2010-12-09 14:23:24 +01:00
Paul Brook 01af7daf55 VirtIO config option
Make virtio devices optional.  Selecting individual devices is not useful
as the host bindings are all in one file.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-11-27 00:06:13 +00:00
Paul Brook f8f5cfbaa4 PCI config include
Split PCI config options into a separate file

Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-11-27 00:06:13 +00:00
Daniel P. Berrange c276b17da6 Add support for generating a systemtap tapset static probes
This introduces generation of a qemu.stp/qemu-system-XXX.stp
files which provides tapsets with friendly names for static
probes & their arguments. Instead of

    probe process("qemu").mark("qemu_malloc") {
        printf("Malloc %d %p\n", $arg1, $arg2);
    }

It is now possible todo

    probe qemu.system.i386.qemu_malloc {
        printf("Malloc %d %p\n", size, ptr);
    }

There is one tapset defined per target arch, for both
user and system emulators.

* Makefile.target: Generate stp files for each target
* tracetool: Support for generating systemtap tapsets
* configure: Check for whether systemtap is available
  with the DTrace backend

Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-21 09:16:56 -06:00
Anthony Liguori 371c338eca Revert "Add support for generating a systemtap tapset static probes"
This reverts commit 2834c3e014.

Conflicts:

	Makefile.target
2010-11-21 09:16:56 -06:00
Peter Maydell b88417062d Fix compilation failure with simple trace when srcdir==objdir
Fix a makefile error that meant that qemu would not compile if
the source and object directories were the same.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-16 14:35:00 -06:00
Daniel P. Berrange 2834c3e014 Add support for generating a systemtap tapset static probes
This introduces generation of a qemu.stp/qemu-system-XXX.stp
files which provides tapsets with friendly names for static
probes & their arguments. Instead of

    probe process("qemu").mark("qemu_malloc") {
        printf("Malloc %d %p\n", $arg1, $arg2);
    }

It is now possible todo

    probe qemu.system.i386.qemu_malloc {
        printf("Malloc %d %p\n", size, ptr);
    }

There is one tapset defined per target arch.

* Makefile: Generate a qemu.stp file for systemtap
* tracetool: Support for generating systemtap tapsets

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-16 09:31:18 -06:00
Jes Sorensen b152aa84d5 Consolidate oom_check() functions
This consolidates the duplicated oom_check() functions, as well as
splitting them into OS dependant versions to avoid the #ifdef
grossness that was present in the old osdep.c version.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-10-30 08:02:39 +00:00
Anthony Liguori 48f57044e6 Merge remote branch 'qmp/for-anthony' into staging 2010-10-05 13:54:49 -05:00
Andreas Färber aff447c916 Haiku doesn't have libm
Math functions are integrated into Haiku's libroot.

Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-10-03 06:31:21 +00:00
Luiz Capitulino acd0a09337 Monitor: Rename the qemu-monitor.hx file
Let's be consistent and call it hmp-commands.hx, so that we have
qmp-commands.hx for QMP and hmp-commands.hx for HMP.

Please, note that this commit doesn't touch qemu-monitor.texi. All
texi files have the qemu- prefix and I don't think it's worth
changing that.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-10-01 10:20:07 -03:00
Luiz Capitulino f36b4afba9 QMP: Introduce command dispatch table
Also update QMP functions to use it. The table is generated
from the qmp-commands.hx file.

From now on, QMP and HMP have different command dispatch
tables.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-10-01 10:20:06 -03:00
Edgar E. Iglesias 2c50e26efd powerpc: Add a virtex5 ml507 refdesign board
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2010-09-30 18:53:30 +02:00
Stefan Hajnoczi 94a420b170 trace: Add trace-events file for declaring trace events
This patch introduces the trace-events file where trace events can be
declared like so:

qemu_malloc(size_t size) "size %zu"
qemu_free(void *ptr) "ptr %p"

These trace event declarations are processed by a new tool called
tracetool to generate code for the trace events.  Trace event
declarations are independent of the backend tracing system (LTTng User
Space Tracing, ftrace markers, DTrace).

The default "nop" backend generates empty trace event functions.
Therefore trace events are disabled by default.

The trace-events file serves two purposes:

1. Adding trace events is easy.  It is not necessary to understand the
   details of a backend tracing system.  The trace-events file is a
   single location where trace events can be declared without code
   duplication.

2. QEMU is not tightly coupled to one particular backend tracing system.
   In order to support tracing across QEMU host platforms and to
   anticipate new backend tracing systems that are currently maturing,
   it is important to be flexible and not tied to one system.

This commit includes fixes from Prerna Saxena
<prerna@linux.vnet.ibm.com> and Blue Swirl <blauwirbel@gmail.com>.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2010-09-09 16:22:44 -05:00
Hollis Blanchard 52ba784d35 Fix "make install" with a cross toolchain
We must be able to use a non-native strip executable, but not all
versions of 'install' support the --strip-program option (e.g.
OpenBSD). Accordingly, we can't use 'install -s', and we must run strip
separately.

Signed-off-by: Hollis Blanchard <hollis@penguinppc.org>
Cc: blauwirbel@gmail.com
2010-08-26 18:18:26 +02:00
Cam Macdonell 3dcbf8f9ca Disable build of ivshmem on non-KVM systems
Signed-off-by: Cam Macdonell <cam@cs.ualberta.ca>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-15 09:44:53 +00:00
Cam Macdonell 6cbf4c8c64 RESEND: Inter-VM shared memory PCI device
resend for bug fix related to removal of irqfd

Support an inter-vm shared memory device that maps a shared-memory object as a
PCI device in the guest.  This patch also supports interrupts between guest by
communicating over a unix domain socket.  This patch applies to the qemu-kvm
repository.

    -device ivshmem,size=<size in format accepted by -m>[,shm=<shm name>]

Interrupts are supported between multiple VMs by using a shared memory server
by using a chardev socket.

    -device ivshmem,size=<size in format accepted by -m>[,shm=<shm name>]
           [,chardev=<id>][,msi=on][,ioeventfd=on][,vectors=n][,role=peer|master]
    -chardev socket,path=<path>,id=<id>

The shared memory server, sample programs and init scripts are in a git repo here:

    www.gitorious.org/nahanni

Signed-off-by: Cam Macdonell <cam@cs.ualberta.ca>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-10 16:25:16 -05:00
Corentin Chary efe556adb7 vnc: tight add PNG encoding
Introduce a new encoding: VNC_ENCODING_TIGHT_PNG [1] (-269) with a new
tight filter VNC_TIGHT_PNG (0x0A). When the client tells it supports the Tight PNG
encoding, the server will use tight, but will always send encoding pixels using
PNG instead of zlib. If the client also told it support JPEG, then the server can
send JPEG, because PNG will only be used in the cases zlib was used in normal tight.

This encoding was introduced to speed up HTML5 based VNC clients like noVNC [2], but
can also be used on devices like iPhone where PNG can be rendered in hardware.

[1] http://wiki.qemu.org/VNC_Tight_PNG
[2] http://github.com/kanaka/noVNC/

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-26 17:36:14 -05:00
Corentin Chary 2f6f5c7a00 vnc: tight: add JPEG and gradient subencoding with smooth image detection
Add gradient filter and JPEG compression with an heuristic to detect how
lossy the comppression will be. This code has been adapted from
libvncserver/tight.c.

JPEG support can be enabled/disabled at compile time with --enable-vnc-jpeg
and --disable-vnc-jpeg.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-26 17:23:53 -05:00
Alexander Graf 1ddda5cd36 AppleSMC device emulation
Intel Macs have a chip called the "AppleSMC" which they use to control
certain Apple specific parts of the hardware, like the keyboard background
light.

That chip is also used to store a key that Mac OS X uses to decrypt binaries.

This patch adds emulation for that chip, so we're getting one step further
to having Mac OS X run natively on Qemu.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-11 20:33:10 +03:00
Blue Swirl 08af49da7e piix4: compile only once
Compile piix4 in hwlib. Two compilations less for the full build.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-03 06:49:47 +00:00
cmchao 02d7434111 hw/omap1.c : separate uart module
Signed-off-by: cmchao <cmchao@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 20:41:37 +02:00
cmchao 2c1d9ecb22 hw/omwp2.c : separate l4 interconnect module
Signed-off-by: cmchao <cmchao@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 20:41:37 +02:00
cmchao cc9577cfb7 hw/omap2.c : separate tap module(Test-Chip-level)
Signed-off-by: cmchao <cmchao@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 20:41:37 +02:00
cmchao 2d08cc7c3f hw/omap2.c : separate spi module
Signed-off-by: cmchao <cmchao@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 20:41:37 +02:00
cmchao 7f132a21fc hw/omap1.c : separate interrupt controller module
Signed-off-by: cmchao <cmchao@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 20:41:37 +02:00
cmchao 0bf4301600 hw/omap2.c : separate sdrc (sdram controller)
Signed-off-by: cmchao <cmchao@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 20:41:36 +02:00
cmchao f3354b0e5d hw/omap2.c : separate gpmc(general purpose memory controller)
Signed-off-by: cmchao <cmchao@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 20:41:36 +02:00
cmchao 011d87d033 hw/omap2.c : separate synctimer module
Signed-off-by: cmchao <cmchao@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 20:41:36 +02:00
cmchao c58d37cfdc hw/omap2.c : separate gptimer module
Signed-off-by: cmchao <cmchao@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 20:41:36 +02:00
cmchao e5c6b25a14 hw/omap1.c : separate gpio module
Signed-off-by: cmchao <cmchao@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 20:41:35 +02:00
Huacai Chen 051c190bce MIPS: Initial support of fulong mini pc (machine construction)
Signed-off-by: Huacai Chen <zltjiangshi@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-29 23:07:52 +02:00
Huacai Chen edf79e66c0 Initial support of vt82686b south bridge used by fulong mini pc
Signed-off-by: Huacai Chen <zltjiangshi@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-29 23:07:51 +02:00
Huacai Chen d0f7453d13 MIPS: Initial support of bonito north bridge used by fulong mini pc
Signed-off-by: Huacai Chen <zltjiangshi@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-29 23:07:51 +02:00
Venkateswararao Jujjuri (JV) 758e8e38eb virtio-9p: Make infrastructure for the new security model.
This patch adds required infrastructure for the new security model.

- A new configure option for attr/xattr.
- if CONFIG_VIRTFS will be defined if both CONFIG_LINUX and CONFIG_ATTR defined.
- Defines routines related to both security models.

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-06-22 15:15:50 -05:00
Edgar E. Iglesias 77d4f95e11 cris: Break out image loading to hw/cris-boot.c.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@axis.com>
2010-06-10 14:45:46 +02:00
Richard Henderson 680c877af4 linux-user: Use qemu-malloc.c.
Since we're no longer setting PAGE_RESERVED, there's no need to
implement qemu_malloc via mmap.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-28 23:27:19 +02:00
Blue Swirl 4556bd8b25 Compile dma only once
Use a qemu_irq to request CPU exit.

7 compilations less for the full build.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-22 08:00:52 +00:00
Blue Swirl 956a3e6bb7 Compile pckbd only once
Use a qemu_irq to indicate A20 line changes. Move I/O port 92
to pckbd.c.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-22 07:59:01 +00:00
Blue Swirl c69ea0dff2 Compile acpi_piix4, apm and pm_smbus only once
12 compilations less for the full build.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-17 19:32:37 +00:00
Isaku Yamahata 845773ab03 pc: split out piix specific part from pc.c into pc_piix.c
Finally, we can safely split out the piix specific part from pc.c
into pc_piix.c.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15 15:53:25 +00:00
Isaku Yamahata 93d89f63e5 acpi: split acpi.c into the common part and the piix4 part.
Split acpi.c into the common part and the piix4 specific part.
The common part will be used later.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15 15:30:49 +00:00
Isaku Yamahata 04762841d8 acpi: split out apm register emulation from acpi.c
Split out apm register emulation for acpi.c into apm.c.
The apm emulation will be used later.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15 15:27:19 +00:00
Isaku Yamahata fc0bdd995c acpi: split out piix4 smbus routines from acpi.c into pm_smbus.c
Split out piix4 smbus routines from acpi.c into pm_smbus.c and
use it.
The split out smbus emulation will be used later.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15 15:25:31 +00:00
Blue Swirl d08555c17a Compile virtio-9p-debug and virtio-9p-local once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-14 19:31:53 +00:00
Jan Kiszka 0e1a275bd4 Add KVM CFLAGS to vhost build
The configure test of vhost uses KVM CFLAGS, so the build must use them
as well. Otherwise we specifically miss what --kerneldir provides.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-05-03 12:39:12 -05:00
Anthony Liguori 9f10751365 virtio-9p: Add a virtio 9p device to qemu
This patch doesn't implement the 9p protocol handling
code. It adds a simple device which dump the protocol data.

[jvrao@linux.vnet.ibm.com: Little-Endian to host format conversion]
[aneesh.kumar@linux.vnet.ibm.com: Multiple-mounts support]

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-05-03 12:17:37 -05:00
Richard Henderson 6495a04457 linux-user: Remove ELFLOAD32.
The ABI-specific types used by linux_binprm and image_info
are different after forcing TARGET_ABI32 on.  Which means
that the parameters that load_elf_binary_multi sees are not
those that loader_exec passed.  This is inherently broken
and is more trouble than it's worth fixing.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-25 12:59:30 +00:00
Blue Swirl d3538b45ea Compile event_notifier only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-19 19:47:49 +00:00
Blue Swirl 04c9a0cbc2 Compile vl.c once
Since kvm.h can be used in files compiled once,
we can partially revert
b33612d035.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-19 19:46:13 +00:00
Paolo Bonzini 98c8573eb3 provide a stub version of kvm-all.c if !CONFIG_KVM
This allows limited use of kvm functions (which will return ENOSYS)
even in once-compiled modules.  The patch also improves a bit the error
messages for KVM initialization.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[blauwirbel@gmail.com: fixed Win32 build]
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-19 18:59:30 +00:00
Paolo Bonzini 28c2897373 move balloon handling to balloon.c
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-09 18:55:56 +02:00
Alexander Graf e9d0fc7463 Make virtio-pci building conditional again
Commit b305b9d7d6 made building of virtio-pci
conditional and not enabled on S390x, because it collides with the S390 bus.

Commit 087431d1d1 accidentially reverted that
behavior, breaking S390x again.

So here's a follow-up patch disabling building of virtio-pci on S390x again.

This unbreaks the S390x target.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-08 21:49:15 +02:00
Paul Brook a67ba3b6f8 Revert "Compile usb-ohci only once"
This reverts commit f1698408f1.

PCI is always little-endian. Having a user-visible "be" property is just
plain wrong.
2010-04-04 21:18:26 +01:00
Blue Swirl 240566908f sparc32: rename iommu.c to sun4m_iommu.c to make room for other IOMMUs
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-03 07:35:50 +00:00
Michael S. Tsirkin d59700553e vhost: vhost net support
This adds vhost net device support in qemu. Will be tied to tap device
and virtio by following patches.  Raw backend is currently missing,
will be worked on/submitted separately.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-01 13:56:43 -05:00
Michael S. Tsirkin 2292b33986 notifier: event notifier implementation
event notifiers are slightly generalized eventfd descriptors. Current
implementation depends on eventfd because vhost is the only user, and
vhost depends on eventfd anyway, but a stub is provided for non-eventfd
case.

We'll be able to further generalize this when another user comes along
and we see how to best do this.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-01 13:56:43 -05:00
Anthony Liguori 087431d1d1 virtio-pci: compile per-target
With vhost, virtio-pci needs to include kvm.h and kvm.h needs to be built
per-target.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-01 13:56:19 -05:00
Anthony Liguori b33612d035 Fix -enable-kvm
Make vl.o compiled per target and fix a thinko in hw/acpi.c.  It's not trivial
to make kvm.h consumable by compiled-once files.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-01 09:58:48 -05:00
Blue Swirl 2b5eb37123 Compile most PPC devices only once
Make byte swapping unconditional since PPC is big endian.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-30 17:36:23 +00:00
Blue Swirl add85a76bb Compile prep_pci only once
Make byte swapping unconditional since PPC is big endian.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29 19:24:04 +00:00
Blue Swirl 29e922b61f Compile qemu-timer only once
Arrange various declarations so that also non-CPU code can access
them, adjust users.

Move CPU specific code to cpus.c.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29 19:24:00 +00:00
Blue Swirl 5c4532ee78 Compile openpic only once
Replace TARGET_PAGE_SIZE with 4096. Make byte swapping unconditional
since PPC is big endian.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29 19:23:59 +00:00
Blue Swirl 02c7c992f0 Compile ide/macio only once
Replace TARGET_PAGE_SIZE with 4096. Make byte swapping unconditional
since PPC is big endian.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29 19:23:57 +00:00
Blue Swirl 3d08ff698b Compile pflash_cfi01 only once
Push TARGET_WORDS_BIGENDIAN dependency to board level.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29 19:23:56 +00:00
Blue Swirl 5f9fc5ad7e Compile pflash_cfi02 only once
Push TARGET_WORDS_BIGENDIAN dependency to board level.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29 19:23:55 +00:00
Blue Swirl 53b67b3052 Compile acpi only once
Use qemu_irqs to trigger CMOS S3 and SMI events.

Avoid using kvm.h, which uses CPUState.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29 19:23:52 +00:00
Blue Swirl ad96090a01 Refactor target specific handling, compile vl.c only once
Move target specific functions and RAM handling to arch_init.c.

Add a flag to QEMUOptions structure to indicate for which
architectures the option is allowed, check the flag
in run time and remove conditional code in option handling.

Now that no target dependencies remain, compile vl.c only once
for all targets.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29 19:23:52 +00:00
Blue Swirl 296af7c952 Refactor CPUState handling out of vl.c
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29 19:23:50 +00:00
Blue Swirl 57448a975e Compile vmware_vga only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-27 18:18:17 +00:00
Blue Swirl b970ea8f8d Compile some MIPS devices only once
Move CPU specific declarations to a separate file.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-27 07:26:16 +00:00
Blue Swirl f7736b91c4 Compile ide/core only once
Make win2k install hack unconditional as it is still restricted to
x86 only in vl.c.

Replace TARGET_PAGE_SIZE and 4096 with PAGE_SIZE.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-27 06:20:53 +00:00
Blue Swirl 8f51bdab44 Compile virtio-pci only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-22 20:18:58 +00:00
Blue Swirl 70615c38de Compile sound devices only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-22 20:18:40 +00:00
Blue Swirl 952760bb7b Compile pci_host only once
Convert pci_host_conf_register_mmio_noswap(x) to
pci_host_conf_register_mmio(x, 0).

Convert pci_host_conf_register_mmio(x) to
pci_host_conf_register_mmio(x, 1) for big endian hosts, all cases
happen to be BE.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:15 +00:00
Blue Swirl c1f63a9d43 Compile pcie_host only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:14 +00:00
Blue Swirl 6842a08ee0 Compile pci only once
Move coalesced_mmio declarations to a more accessible location.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:13 +00:00
Blue Swirl f1698408f1 Compile usb-ohci only once
Push TARGET_WORDS_BIGENDIAN dependency to board level.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:12 +00:00
Blue Swirl 2d48377a85 Compile serial only once
Push TARGET_WORDS_BIGENDIAN dependency to board level.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:11 +00:00
Blue Swirl d3ffc7a6e7 Compile ne2000_isa only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:10 +00:00
Blue Swirl 84108e128e Compile isa_mmio only once
Push TARGET_WORDS_BIGENDIAN dependency to board level.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:09 +00:00
Blue Swirl 7161e5710b Compile most PCI network cards only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:08 +00:00
Blue Swirl e1060e9d2d Compile qemu-error only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:07 +00:00
Blue Swirl 64dc9c31ae Compile async only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:07 +00:00
Blue Swirl 35da37e141 Compile fdc only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:06 +00:00
Blue Swirl 9953b2fc28 Compile most IDE devices only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:05 +00:00
Blue Swirl 4c65f1e5ba Compile usb-uhci only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:04 +00:00
Blue Swirl 7f55c7ced6 Compile vga-isa only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:03 +00:00
Blue Swirl 7109371158 Compile pcspk only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:02 +00:00
Blue Swirl df6327780d Compile i8254 only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:02 +00:00
Blue Swirl b994504610 Compile parallel only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:01 +00:00
Blue Swirl 1afdfddc41 Compile vga-pci only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:00 +00:00
Blue Swirl 4d9045339a Compile disassemblers only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 08:28:47 +00:00
Paolo Bonzini db1a49726c split out qemu-timer.c
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-17 11:16:15 -05:00
Anthony Liguori 4a39943bd1 Merge remote branch 'markus/qerror' into staging 2010-03-17 09:44:37 -05:00
Markus Armbruster b4a51f7f5d error: Move qemu_error() & friends from monitor.c to own file
They're about reporting errors, not about the monitor.
2010-03-16 16:55:05 +01:00
Aurelien Jarno 409dbce54b load_elf: replace the address addend by a translation function
A few machines need to translate the ELF header addresses into physical
addresses. Currently the only possibility is to add a value to the
addresses.

This patch replaces the addend argument by and a translation function
and an opaque passed to the function. A NULL function does not translate
the address.

The patch also convert all machines that have an addend, simplify the
PowerPC kernel loading and fix the MIPS kernel loading using this new
feature. Other machines may benefit from this feature.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-16 08:38:05 +01:00
Andre Przywara c6dc6f63bf x86/cpuid: move CPUID functions into separate file
about half of target-i386/helper.c consist of CPUID related functions.
Only one of them is a real TCG helper function. So move the whole
CPUID stuff out of this into a separate file to get better
maintainable parts.
This is only code reordering and should not affect QEMU's
functionality.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-13 16:50:54 +01:00
Richard Henderson 6049f4f831 alpha-linux-user: Implement signals.
Move userland PALcode handling into linux-user main loop so that
we can send signals from there.  This also makes alpha_palcode.c
system-level only, so don't build it for userland.  Add defines
for GENTRAP PALcall mapping to signals.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-28 17:54:52 +01:00
Blue Swirl 51464fafdf Don't compile rwhandler.c for user targets
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-20 09:27:38 +00:00
Michael S. Tsirkin 049f7adbd5 rwhandler: simplified way to register for mem/io
Some users prefer a single callback with length passed as parameter to
using b/w/l callbacks. It would maybe be cleaner to just pass length to
existing callbacks but that's a lot of churn.  So for now add a wrapper.
For convenience use pcibus_t for address so a single callback can be
used for pci io and pci memory.

I did have to resort to preprocessor to reduce code duplication.  It is
however slightly more straightforward, and better contained than what we
had with pci_host_template.h. Again, it would go away if we just passed
len to existing callbacks.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-02-14 16:10:53 +02:00
Loïc Minier da79030f47 linux-user: adapt uname machine to emulated CPU
This patch for linux-user adapts the output of the emulated uname()
syscall to match the configured CPU.  Tested with x86, x86-64 and arm
emulation.

Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Loïc Minier <lool@dooz.org>
2010-02-06 17:19:43 +01:00
Blue Swirl e1c6bbabee Refactor DEC 21154 PCI bridge
It's currently not used by PPC machines. Refactor so that also Sparc64
machines can use it.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-05 18:48:36 +00:00
Edgar E. Iglesias 2548de3a34 microblaze: The petalogix s3adsp board uses intel flashes
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
2010-01-24 17:15:05 +01:00
Amit Shah 4d3053a3c6 Move virtio-serial to Makefile.objs
There's nothing target-dependent in the virtio-serial code so allow it
to be compiled just once for all the targets.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-20 08:25:23 -06:00
Amit Shah 98b19252cf virtio-console: qdev conversion, new virtio-serial-bus
This commit converts the virtio-console device to create a new
virtio-serial bus that can host console and generic serial ports. The
file hosting this code is now called virtio-serial-bus.c.

The virtio console is now a very simple qdev device that sits on the
virtio-serial-bus and communicates between the bus and qemu's chardevs.

This commit also includes a few changes to the virtio backing code for
pci and s390 to spawn the virtio-serial bus.

As a result of the qdev conversion, we get rid of a lot of legacy code.
The old-style way of instantiating a virtio console using

    -virtioconsole ...

is maintained, but the new, preferred way is to use

    -device virtio-serial -device virtconsole,chardev=...

With this commit, multiple devices as well as multiple ports with a
single device can be supported.

For multiple ports support, each port gets an IO vq pair. Since the
guest needs to know in advance how many vqs a particular device will
need, we have to set this number as a property of the virtio-serial
device and also as a config option.

In addition, we also spawn a pair of control IO vqs. This is an internal
channel meant for guest-host communication for things like port
open/close, sending port properties over to the guest, etc.

This commit is a part of a series of other commits to get the full
implementation of multiport support. Future commits will add other
support as well as ride on the savevm version that we bump up here.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-20 08:25:23 -06:00
Paolo Bonzini 59bc10ee01 finish VPATH -> vpath translation
This adds a few more vpath suffixes and points the remaining two paths
explicitly to $(SRC_PATH) in order to eliminate the VPATH assignment
from config-host.mak.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-08 16:55:03 -06:00
Adam Lackorzynski 52001445c9 multiboot: Separate multiboot loading into separate file
Move multiboot loading code into separate files as suggested by Alex Graf.

Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-08 09:58:41 -06:00
H. Peter Anvin c9f398e53f debugcon: support for debugging consoles (e.g. Bochs port 0xe9)
Add generic support for debugging consoles (simple I/O ports which
when written to cause debugging output to be written to a target.)
The current implementation matches Bochs' port 0xe9, allowing the same
debugging code to be used for both Bochs and Qemu.

There is no vm state associated with the debugging port, simply
because it has none -- the entire interface is a single, stateless,
write-only port.

Most of the code was cribbed from the serial port driver.

v2: removed non-ISA variants (they can be introduced when/if someone
wants them, using code from the serial port); added configurable
readback (Bochs returns 0xe9 on a read from this register, mimic that
by default)  This retains the apparently somewhat controversial user
friendly option, however.

v3: reimplemented the user friendly option as a synthetic option
("-debugcon foo" basically ends up being a parser-level shorthand for
"-chardev stdio,id=debugcon -device isa-debugcon,chardev=debugcon") --
this dramatically reduced the complexity while keeping the same level
of user friendliness.

v4: spaces, not tabs.

v5: update to match current top of tree.  Calling qemu_chr_open()
already during parsing no longer works; defer until we are parsing the
other console-like devices.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-08 09:58:40 -06:00
Paolo Bonzini 076d247142 Use vpath directive
The vpath directive has two advantages over the VPATH variable:
1) it allows to skip searching of .o files; 2) the default semantics
are to append to the vpath, so there is no confusion between "VPATH=xyz"
and "VPATH+=xyz".

Since "vpath %.c %.h PATH" is not valid, I'm introducing a wrapper
macro to append one or more directories to the vpath.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-08 09:58:40 -06:00
Andreas Färber 0e8c9214ba Drop --whole-archive and static libraries
Juan has contributed a cool Makefile infrastructure that enables us to drop
static libraries completely:

Move shared obj-y definitions to Makefile.objs, prefixed {common-,hw-,user-},
and link those object files directly into the executables.

Replace HWLIB by HWDIR, specifying only the directory.

Drop --whole-archive and ARLIBS in Makefiles and configure.

Drop GENERATED_HEADERS dependency in rules.mak, since this rebuilds all
common objects after generating a target-specific header; add dependency
rules to Makefile and Makefile.target instead.

v2:
- Don't try to include /config.mak for user emulators
- Changes to user object paths ("Quickfix for libuser.a drop") were obsoleted
  by "user_only: compile everything with -fpie" (Kirill A. Shutemov)

v3:
- Fix dependency modelling for tools
- Remove comment on GENERATED_HEADERS obsoleted by this patch

Signed-off-by: Andreas Färber <afaerber@opensolaris.org>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Palle Lyckegaard <palle@lyckegaard.dk>
Cc: Ben Taylor <bentaylor.solx86@gmail.com>
Cc: Juan Quintela <quintela@trasno.org>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-01-07 18:08:53 +00:00
Alexander Graf 8cb310e130 Add S390x virtio machine description
In order to use the new S390x virtio bus we just introduced, we also
need a machine description that sets up the machine according to our
PV specification.

Let's add that machine description and be happy!

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-05 17:36:05 +01:00
Alexander Graf f3304eea93 Add S390x virtio machine bus
On S390x we don't want to go through the hassle of emulating real existing
hardware, because we don't need to for running Linux.

So let's instead implement a machine that is 100% based on VirtIO which we
fortunately implement already.

This patch implements the bus that is the groundwork for such an S390x
virtio machine.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-05 17:36:05 +01:00
Stefan Weil 9ea37780a4 Remove rule for config-devices.h
Since commit a992fe3d0f
config-devices.h is no longer used.

So there is no need to keep the dependency rules
any longer.

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03 15:26:01 -06:00
Paul Brook a992fe3d0f Makefile dependencies for device configs
Add makefile dependencies for target specific device configs.
These will copy the default config if none exists, obsoleting the old
configure time code.  If a config already exists but is older than the
default then print a warning.

Also remove config-devices.h.  Code does not and should not care which
devices are being built.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-11-22 21:24:54 +00:00
Paul Brook f7c703250c ARM PBX-A9 board support
Implement ARM RealView PBX-A9 board support.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-11-19 16:45:21 +00:00
Paul Brook f165b53a89 Built network devices once
Move some generic NICS into libhw, and build them for ARM targets.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-11-19 16:42:45 +00:00
Paul Brook 2a42499017 LAN9118 emulation
Add SMSC LAN9118 ethernet emulation.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-11-16 17:06:43 +00:00
Juan Quintela f527c57935 fix parallel build
Based on a ideas of Daniel Jacobowitz + Stefan Weil

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-12 11:23:54 -06:00
Isaku Yamahata a9f4994611 pci: pcie host and mmcfg support.
This patch adds common routines for pcie host bridge and pcie mmcfg.
This will be used by q35 based chipset emulation.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09 08:43:09 -06:00
Isaku Yamahata 4f5e19e6c5 pci_host.h: move functions in pci_host.h into .c file.
split static functions in pci_host.h into pci_host.c and
pci_host_template.h.
Later a structures declared in pci_host.h, PCIHostState, will be used.
However pci_host.h doesn't allow to include itself easily. This patches
addresses it.

pci_host.h includes functions which are instantiated in .c by including
pci_host.h with typedefing pci_addr_t.
pci_addr_t is per pci host bridge and is typedef'ed to uint32_t for ioio
or target_phys_addr_t for mmio in .c file.
That prevents from including pci_host.h to use PCIHostState because of
requiring type, pci_addr_t.

Its purpose to include is to instantiate io function for mmio or ioio
depending on which pci host bridge requires ioio or mmio.
To avoid including code, we always instantiate both version.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09 08:43:07 -06:00
Kevin Wolf 4f999d05f5 Split out bottom halves
Instead of putting more and more stuff into vl.c, let's have the generic
functions that deal with asynchronous callbacks in their own file.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27 12:28:59 -05:00
Gerd Hoffmann 94e1a912b2 pcnet: split away lance.c (sparc32 code).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27 12:28:40 -05:00
Juan Quintela 4c3df0ecc2 ide: split cmd646 and piix from pci.c
This patch splits cmd646 specific code from pci.c.
This patch splits piix4 specific code from pci.c.
And compile new piix.o and cmd646.o when they are needed.
The only change that is not code movemet is removal of cmd646 specific parts
in bmdma_readb/writeb for piix.

Patchworks-ID: 35301
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-12 09:42:30 -05:00
Juan Quintela 185c66c81d Only compile isa_mmio when one target uses it
Patchworks-ID: 35200
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08 21:17:11 -05:00
Juan Quintela 642575843f Only compile usb_ohci when one target uses it
Patchworks-ID: 35199
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08 21:17:11 -05:00
Juan Quintela 3d0f151783 Generate gdbstub-xml.c only when needed
First user of new config-devices.mak

Patchworks-ID: 35198
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08 21:17:11 -05:00
Juan Quintela fe0d4d3f77 Generate config-devices.h
Generate config-devices.h for each target and config-all-devices.h for
common library.  We don't want to name both config-devices.h to avoid
path problems

Patchworks-ID: 35195
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08 21:17:10 -05:00
Juan Quintela 1f3d3c8fd7 Add new config-devices.mak for each target
We generate config-devices.h from there automatically.
We need to do it in main Makefile, because we are going to need a main
Makefile for them.

Patchworks-ID: 35196
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08 21:17:10 -05:00
Juan Quintela 91880d96a1 Move generation of config-target.h to Makefile from configure
Patchworks-ID: 35194
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08 21:17:04 -05:00
Juan Quintela 25be210f69 Rename config.{h, mak} config-target.{h, mak}
Add config.h file that includes config-target.h and config-host.h

Patchworks-ID: 35193
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08 21:17:03 -05:00
Juan Quintela deed3ccfca Don't include config-host.mak from inside config.mak
Include it directly in Makefile.target

Patchworks-ID: 35189
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08 21:17:02 -05:00
Blue Swirl add16157d7 Compile some user files only once for all targets
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-27 16:26:02 +00:00
Blue Swirl 05d00df4e1 Fix user emulator breakage
Fix breakage in the following conditions:
- use in-tree building
- build user targets after system targets

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-27 13:56:55 +00:00
Blue Swirl 3f600fa030 Revert "This files are compiled in libqemu.a now"
This reverts commit fe6549dfd7.

tcg-runtime and host-utils are needed on 32 bit host and they are not part
of libqemu.a.

Thanks to Stefan Weil for reporting.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-25 19:21:06 +00:00
Juan Quintela befb031654 clean: remove ide/*.o files on clean
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-09-25 17:28:33 +02:00
Juan Quintela fe6549dfd7 This files are compiled in libqemu.a now
This fixes compilation of linux-user with today qemu, please apply.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-09-23 09:25:02 +02:00
Blue Swirl 52d946208e Fix user targets broken by 96e132e24e
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-21 15:24:07 +00:00
Blue Swirl c2b023b627 Compile host-utils only once
See also facd285778 and
34005a0060.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-20 19:20:05 +00:00
Blue Swirl 96e132e24e Compile TCG runtime library only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-20 19:06:34 +00:00
Blue Swirl bd390e6425 Compile ne2000 only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-20 16:19:32 +00:00
Blue Swirl afcea8cbde ioports: remove unused env parameter and compile only once
The CPU state parameter is not used, remove it and adjust callers. Now we
can compile ioport.c once for all targets.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-20 16:05:47 +00:00
Blue Swirl 5e520a7d50 Compile msix only once
Get page size in device init.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-20 15:35:55 +00:00
Blue Swirl ca20cf32ab Compile loader only once
Callers must pass ELF machine, byte swapping and symbol LSB clearing
information to ELF loader. A.out loader needs page size information, pass
that too as a parameter.

Extract prototypes to a separate file. Move loader.[ch] and elf_ops.h under hw.

Adjust callers. Also use target_phys_addr_t instead of target_ulong for
addresses: loader addresses aren't virtual.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-20 14:58:02 +00:00
Blue Swirl a333cd7166 Compile qemu-config only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-20 08:28:29 +00:00
Blue Swirl 9801c7b436 Compile wdt_i6300esb only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-20 08:02:28 +00:00
Gerd Hoffmann feef310217 ide/pci: convert to qdev.
With this patch applied ide drives (when attached to a pci adapter) can
be created via -device, like this:

  -drive if=none,id=mydisk,file=/path/to/disk.img
  -device ide-drive,drive=mydisk,bus=ide.0,unit=0

Note that creating a master on ide1 doesn't work that way.  That is a
side effect of qemu creating a cdrom automagically even if you don't
ask for it.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-15 20:04:24 +00:00
Blue Swirl 5c637a20e9 Fix breakage by f80237d450 for ISA-less targets
Move ISA bus to HW library.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-14 18:34:54 +00:00
Kirill A. Shutemov 34005a0060 Add configure option to compile user targets as PIE
Build uset targers as true PIE if user want to keep qemu
self-virtualizable.

v5:
  - Split into to patches: drop link hack and add PIE support
  - do not build PIE by default and drop toolchain check

v4:
  - Add test for toolchain if it has proper PIE support

v3:
  - One more pice of the hack was removed
  - Description updated

v2:
  - Add configure options do enable/disable PIE for usermode targets.
    Disabling can be useful if you build uswing toolchain which has
    broken PIE support. PIE for usermode targets enabled by default.

Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-12 13:17:45 +00:00
Gerd Hoffmann 9453c5bc26 qdev/isa: convert ne2000
Also split the isa bits into a separate source file, so we don't drag in
a dependency for isa-bus.o for machines which want ne2k_pci only.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2009-09-10 19:48:01 +04:00
Juan Quintela 79b97bf2e7 vga: split vga-isa-mm.o
It is only used in mips softmmu, compile only there.
it_shift field was only used for vga_isa_mm, move it from VGACommonState
to ISAVGAMMstate.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09 14:55:11 -05:00
Juan Quintela 76323919df vga: split isa bits inco vga-isa.c
Adjust all the VGAState in VGACommonState
Compile vga-isa.o in the targets that use it

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09 14:55:11 -05:00
Juan Quintela 47d37dd9c8 vga: split pci bits into vga-pci.c
Adjust all the VGAState in VGACommonState
Compile vga-pci.o only for targets that use it.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09 14:55:11 -05:00
Juan Quintela 823e675a07 Split piix4 support from piix_pci.c
Now mips_malta uses piix4 and pc's use piix_pci definitions

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-04 09:37:22 -05:00
Gerd Hoffmann 59f2a78793 ide: move code to hw/ide/
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27 20:46:50 -05:00
Gerd Hoffmann 3f221c8d02 ide: split away ide-microdrive.c
create ide-microdrive.c and place microdrive support there.
only build ide-microdrive support for platforms using it.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27 20:43:33 -05:00
Gerd Hoffmann 3d2bf4a109 ide: split away ide-mmio.c
create ide-mmio.c and place mmio support there.
only build ide-mmio support for platforms using it.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27 20:43:33 -05:00
Gerd Hoffmann 977e1244e8 ide: split away ide-pci.c
create ide-pci.c and place pci bus support there.
only build ide-pci support for platforms using it.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Fix build (merge with isa mmio split)
2009-08-27 20:43:33 -05:00
Gerd Hoffmann ec82026c97 ide: split away ide-isa.c
create ide-isa.c and place isa bus support there.
only build ide-isa support for platforms using it.
also create ide.h header file.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27 20:43:33 -05:00
Markus Armbruster 09aaa1602f qdev: convert watchdogs
-watchdog NAME is now equivalent to -device NAME, except it treats
option argument '?' specially, and supports only one watchdog.

A side effect is that a device created with -watchdog may now receive
a different PCI address.

i6300esb is now available on any machine with a PCI bus, not just PCs.
ib700 is still PC only, but that could be changed easily.

The only remaining use of struct WatchdogTimerModel and
watchdog_add_model() is supporting '-watchdog ?'.  Should be replaced
by searching device_info_list for watchdog devices when we can
identify them there.

Also fixes ib700 not to use vm_clock before it is initialized: in
wdt_ib700_init(), called from register_watchdogs(), which runs before
init_timers().  The bug made ib700_write_enable_reg() crash in
qemu_del_timer().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27 20:35:24 -05:00
Jes Sorensen 3a38d437ca Add isa_reserve_irq().
Introduce isa_reserve_irq() which marks an irq reserved and returns
the appropriate qemu_irq entry from the i8259 table.

isa_reserve_irq() is a temporary interface to be used to allocate ISA
IRQs for devices which have not yet been converted to qdev, and for
special cases which are not suited for qdev conversions, such as the
'ferr'.

This patch goes on top of Gerd Hoffmann's which makes isa-bus.c own
the ISA irq table.

[ added isa-bus.o to some targets to fix build failures  -- kraxel ]

Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27 20:30:20 -05:00
malc 523e727d46 Remove a hack introduced by d19076faca
Work by Blue Swirl culminating with 5c55ff99fa
made it unnecessary.
2009-08-27 18:04:10 +04:00
Michael S. Tsirkin 3987e1cf6d qemu: move virtio-pci.o to near pci.o
virtio-pci depends, and will always depend, on pci.c
so it makes sense to keep it in the same makefile,
(unlike the rest of virtio files which should eventually
 be moved out to Makefile.hw).

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-24 08:46:47 -05:00
Anthony Liguori a25a0ef51e Only build osdep once
We no longer need hackery to work around kqemu

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-24 08:02:55 -05:00
Anthony Liguori 4a1418e07b Unbreak large mem support by removing kqemu
kqemu introduces a number of restrictions on the i386 target.  The worst is that
it prevents large memory from working in the default build.

Furthermore, kqemu is fundamentally flawed in a number of ways.  It relies on
the TSC as a time source which will not be reliable on a multiple processor
system in userspace.  Since most modern processors are multicore, this severely
limits the utility of kqemu.

kvm is a viable alternative for people looking to accelerate qemu and has the
benefit of being supported by the upstream Linux kernel.  If someone can
implement work arounds to remove the restrictions introduced by kqemu, I'm
happy to avoid and/or revert this patch.

N.B. kqemu will still function in the 0.11 series but this patch removes it from
the 0.12 series.

Paul, please Ack or Nack this patch.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-24 08:02:55 -05:00
Andrzej Zaborowski ef07b49145 Extract the Marvell 88w8618 audio device from musicpal.c
Signed-off-by: Benoit Canet <benoit.canet@gmail.com>
Signed-off-by: Andrzej Zaborowski <balrogg@gmail.com>
2009-08-23 15:44:15 +02:00
Andrzej Zaborowski 3ead03bd0a Extract musicpal.c I2C bitbanging code and make it gpio aware
Signed-off-by: Benoit Canet <benoit.canet@gmail.com>
Signed-off-by: Andrzej Zaborowski <balrogg@gmail.com>
2009-08-23 15:38:50 +02:00
Blue Swirl facd285778 user: compile host-utils.c only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-16 08:03:26 +00:00
Blue Swirl e27b27b3c6 Simplify 5ba6531956
Thanks to Juan Quintela.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-16 07:39:33 +00:00
Blue Swirl 6af5a25246 linux-user: compile envlist.c only once
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-15 08:47:42 +00:00
Blue Swirl 5ba6531956 user: compile ioport-user.c only for x86
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-15 07:52:19 +00:00
Blue Swirl 370220865b user: compile path.c only once
Also merge bsd-user/path.c and linux-user/path.c.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-15 07:51:59 +00:00
Anthony Liguori 562593aa8a Add emacs header to Makefile.target
Signed-off-by: Anthony Liguori <aliguori@us.ibmc.om>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
2009-08-10 13:11:27 -05:00
Juan Quintela f14bfdf952 Move libsunpath to use the same style than everything else
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
2009-08-10 13:05:48 -05:00
Juan Quintela f622d8a33d convert gprof flags to style of rest of Makefile
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
2009-08-10 13:05:48 -05:00
Juan Quintela 7973f21c4b Add cocoa libs at Darwin selection time
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
2009-08-10 13:05:47 -05:00
Juan Quintela f03029354e CURL libs are used both by tools and softmmu
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
2009-08-10 13:05:47 -05:00
Juan Quintela 8e02e54cc4 VDE libs are used both by tools and softmmu
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
2009-08-10 13:05:46 -05:00
Juan Quintela e18ea868d2 use TARGET_<arch name> for selection
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
2009-08-10 13:05:46 -05:00
Juan Quintela 55d9c04bc3 Consolidate audio flags in configure
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
2009-08-10 13:05:46 -05:00
Juan Quintela ed69c30dc6 remove last 3 uses of :=, everywhere else uses += or =
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
2009-08-10 13:05:46 -05:00
Juan Quintela 4de67f2fa7 Make slirp include dir globlal in cflags
We already include it everywhere

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
2009-08-10 13:05:45 -05:00
Juan Quintela 864de24ad3 Use one less HELPER_CFLAGS
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
2009-08-10 13:05:45 -05:00
Juan Quintela b248a85ddc Use only one KVM_CFLAGS
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
2009-08-10 13:05:45 -05:00
Juan Quintela 646560247c Move dis-* selection to configure
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
2009-08-10 13:05:45 -05:00
Juan Quintela 471857dd01 Added CONFIG_NEED_MMU for microblaze and cris
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
2009-08-10 13:05:44 -05:00
Juan Quintela 57ddfbf7f9 Generate more conmmon CFLAGS
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
2009-08-10 13:05:44 -05:00
Juan Quintela d02c1db3d8 Fold TARGET_GPROF handling in configure
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
2009-08-10 13:05:44 -05:00
Juan Quintela 10a072a2bd this bit was already generated in configure
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
2009-08-10 13:05:43 -05:00
Juan Quintela c60d0afa65 Move ia64 QEMU_CFLAGS target to configure
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
2009-08-10 13:05:43 -05:00