Move some of the 440 registers that are being repeated in the 440*
CPUs to register_440_sprs.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-11-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We're considering these two to be from different CPU families, so
duplicate some code to keep them separate.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-10-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We're considering these two to be in different CPU families (6xx and
7xx), so keep their SPR registration separate.
The code was copied into register_G2_sprs and the common function was
renamed to apply only to the 755.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-9-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Make sure that every register_*_sprs function only has calls to
spr_register* to register individual SPRs. Do not allow nesting. This
makes the code easier to follow and a look at init_proc_* should
suffice to know what SPRs a CPU has.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-6-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Now that the 601 was removed, all of our CPUs have a timebase, so that
can be moved into the common function.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The top level init_proc calls register_generic_sprs but also registers
some other SPRs outside of that function. Let's group everything into
a single place.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-4-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The G2LE CPU initialization code is the same as the G2. Use the latter
for both.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-3-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The /* XXX : not implemented */ comments all over cpu_init are
confusing and ambiguous.
Do they mean not implemented by QEMU, not implemented in a specific
access mode? Not implemented by the CPU? Do they apply to just the
register right after or to a whole block? Do they mean we have an
action to take in the future to implement these? Are they only
informative?
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-2-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Introduce virtual hypervisor methods that can support a "Nested KVM HV"
implementation using the bare metal 2-level radix MMU, and using HV
exceptions to return from H_ENTER_NESTED (rather than cause interrupts).
HV exceptions can now be raised in the TCG spapr machine when running a
nested KVM HV guest. The main ones are the lev==1 syscall, the hdecr,
hdsi and hisi, hv fu, and hv emu, and h_virt external interrupts.
HV exceptions are intercepted in the exception handler code and instead
of causing interrupts in the guest and switching the machine to HV mode,
they go to the vhyp where it may exit the H_ENTER_NESTED hcall with the
interrupt vector numer as return value as required by the hcall API.
Address translation is provided by the 2-level page table walker that is
implemented for the bare metal radix MMU. The partition scope page table
is pointed to the L1's partition scope by the get_pate vhc method.
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220216102545.1808018-9-npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This moves the logic to reset the QEMU exception state into its own
function.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[ clg: checkpatch fixes ]
Message-Id: <20220216102545.1808018-8-npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The virtual hypervisor currently always intercepts and handles
hypercalls but with a future change this will not always be the case.
Add a helper for the test so the logic is abstracted from the mechanism.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20220216102545.1808018-7-npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
In prepartion for implementing a full partition table option for
vhyp, update the get_pate method to take an lpid and return a
success/fail indicator.
The spapr implementation currently just asserts lpid is always 0
and always return success.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[ clg: checkpatch fixes ]
Message-Id: <20220216102545.1808018-6-npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The radix on vhyp MMU uses a single-level radix table walk, with the
partition scope mapping provided by the flat QEMU machine memory.
A subsequent change will use the two-level radix walk on vhyp in some
situations, so provide a helper which can abstract that logic.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20220216102545.1808018-5-npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Invalid or missing partition table entry exceptions should cause HV
interrupts. HDSISR is set to bad MMU config, which is consistent with
the ISA and experimentally matches what POWER9 generates.
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[ clg: checkpatch fixes ]
Message-Id: <20220216102545.1808018-2-npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
- add PTE_PBMT bits: It uses two PTE bits, but otherwise has no effect on QEMU, since QEMU is sequentially consistent and doesn't model PMAs currently
- add PTE_PBMT bit check for inner PTE
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220204022658.18097-6-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- sinval.vma, hinval.vvma and hinval.gvma do the same as sfence.vma, hfence.vvma and hfence.gvma except extension check
- do nothing other than extension check for sfence.w.inval and sfence.inval.ir
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220204022658.18097-5-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- add PTE_N bit
- add PTE_N bit check for inner PTE
- update address translation to support 64KiB continuous region (napot_bits = 4)
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220204022658.18097-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
For non-leaf PTEs, the D, A, and U bits are reserved for future standard use.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220204022658.18097-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Highest bits of PTE has been used for svpbmt, ref: [1], [2], so we
need to ignore them. They cannot be a part of ppn.
1: The RISC-V Instruction Set Manual, Volume II: Privileged Architecture
4.4 Sv39: Page-Based 39-bit Virtual-Memory System
4.5 Sv48: Page-Based 48-bit Virtual-Memory System
2: https://github.com/riscv/virtual-memory/blob/main/specs/663-Svpbmt-diff.pdf
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Reviewed-by: Liu Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220204022658.18097-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We add "x-aia" command-line option for RISC-V HART using which
allows users to force enable CPU AIA CSRs without changing the
interrupt controller available in RISC-V machine.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-18-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The AIA specification defines IMSIC interface CSRs for easy access
to the per-HART IMSIC registers without using indirect xiselect and
xireg CSRs. This patch implements the AIA IMSIC interface CSRs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-16-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The AIA specification introduces new [m|s|vs]topi CSRs for
reporting pending local IRQ number and associated IRQ priority.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-14-anup@brainfault.org
[ Changed by AF:
- Fixup indentation
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The AIA specificaiton adds interrupt filtering support for M-mode
and HS-mode. Using AIA interrupt filtering M-mode and H-mode can
take local interrupt 13 or above and selectively inject same local
interrupt to lower privilege modes.
At the moment, we don't have any local interrupts above 12 so we
add dummy implementation (i.e. read zero and ignore write) of AIA
interrupt filtering CSRs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-13-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The AIA hvictl and hviprioX CSRs allow hypervisor to control
interrupts visible at VS-level. This patch implements AIA hvictl
and hviprioX CSRs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-12-anup@brainfault.org
[ Changes by AF:
- Fix possible unintilised variable error in rmw_sie()
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The AIA specification adds new CSRs for RV32 so that RISC-V hart can
support 64 local interrupts on both RV32 and RV64.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-11-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The AIA spec defines programmable 8-bit priority for each local interrupt
at M-level, S-level and VS-level so we extend local interrupt processing
to consider AIA interrupt priorities. The AIA CSRs which help software
configure local interrupt priorities will be added by subsequent patches.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220204174700.534953-10-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The AIA device emulation (such as AIA IMSIC) should be able to set
(or provide) AIA ireg read-modify-write callback for each privilege
level of a RISC-V HART.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-9-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The RISC-V AIA specification extends RISC-V local interrupts and
introduces new CSRs. This patch adds defines for the new AIA CSRs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-8-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We define a CPU feature for AIA CSR support in RISC-V CPUs which
can be set by machine/device emulation. The RISC-V CSR emulation
will also check this feature for emulating AIA CSRs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-7-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The machine or device emulation should be able to force set certain
CPU features because:
1) We can have certain CPU features which are in-general optional
but implemented by RISC-V CPUs on the machine.
2) We can have devices which require a certain CPU feature. For example,
AIA IMSIC devices expect AIA CSRs implemented by RISC-V CPUs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-6-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The guest external interrupts from an interrupt controller are
delivered only when the Guest/VM is running (i.e. V=1). This means
any guest external interrupt which is triggered while the Guest/VM
is not running (i.e. V=0) will be missed on QEMU resulting in Guest
with sluggish response to serial console input and other I/O events.
To solve this, we check and inject interrupt after setting V=1.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-5-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The hgeie and hgeip CSRs are required for emulating an external
interrupt controller capable of injecting virtual external interrupt
to Guest/VM running at VS-level.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-4-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
A hypervisor can optionally take guest external interrupts using
SGEIP bit of hip and hie CSRs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-3-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The guest should be able to set the vill bit as part of vsetvl.
Currently we may set env->vill to 1 in the vsetvl helper, but there
is nowhere that we set it to 0, so once it transitions to 1 it's stuck
there until the system is reset.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220201064601.41143-1-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This adds the decoder and translation for the XVentanaCondOps custom
extension (vendor-defined by Ventana Micro Systems), which is
documented at https://github.com/ventanamicro/ventana-custom-extensions/releases/download/v1.0.0/ventana-custom-extensions-v1.0.0.pdf
This commit then also adds a guard-function (has_XVentanaCondOps_p)
and the decoder function to the table of decoders, enabling the
support for the XVentanaCondOps extension.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220202005249.3566542-7-philipp.tomsich@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
To split up the decoder into multiple functions (both to support
vendor-specific opcodes in separate files and to simplify maintenance
of orthogonal extensions), this changes decode_op to iterate over a
table of decoders predicated on guard functions.
This commit only adds the new structure and the table, allowing for
the easy addition of additional decoders in the future.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220202005249.3566542-6-philipp.tomsich@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Zb[abcs] support code still uses the RISCV_CPU macros to access
the configuration information (i.e., check whether an extension is
available/enabled). Now that we provide this information directly
from DisasContext, we can access this directly via the cfg_ptr field.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220202005249.3566542-5-philipp.tomsich@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The implementation in trans_{rvi,rvv,rvzfh}.c.inc accesses the shallow
copies (in DisasContext) of some of the elements available in the
RISCVCPUConfig structure. This commit redirects accesses to use the
cfg_ptr copied into DisasContext and removes the shallow copies.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220202005249.3566542-4-philipp.tomsich@vrull.eu>
[ Changes by AF:
- Fixup checkpatch failures
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
As the number of extensions is growing, copying them individiually
into the DisasContext will scale less and less... instead we populate
a pointer to the RISCVCPUConfig structure in the DisasContext.
This adds an extra indirection when checking for the availability of
an extension (compared to copying the fields into DisasContext).
While not a performance problem today, we can always (shallow) copy
the entire structure into the DisasContext (instead of putting a
pointer to it) if this is ever deemed necessary.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220202005249.3566542-3-philipp.tomsich@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220202005249.3566542-2-philipp.tomsich@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The addition of uxl support in gdbstub adds a few checks on the maximum
register length, but omitted MXL_RV128, an experimental feature.
This patch makes rv128 react as rv64, as previously.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220124202456.420258-1-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
I think these have been wrong since f193c7979c (do not depend on
thunk.h - more log items). Fix them so as not to confuse other
debugging.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220204204335.1689602-26-alex.bennee@linaro.org>
ISA v3.1 changed some VSX instructions behavior by changing what the
other words/doubleword in the result should contain when the result is
only one word/doubleword. e.g. xsmaxdp operates on doubleword 0 and
saves the result also in doubleword 0.
Before, the second doubleword result was undefined according to the
ISA, but now it's stated that it should be zeroed.
Even tough the result was undefined before, hardware implementing these
instructions already filled these fields with 0s. Changing every ISA
version in QEMU to this behavior makes the results match what happens
in hardware.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220204181944.65063-1-victor.colombo@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We don't really need to check for exception model while applying
AIL. We can check the lpcr_mask for the presence of
LPCR_AIL/LPCR_HAIL.
This removes one more instance of passing the exception model ID
around.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220207183036.1507882-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
