The older linker treats .note.gnu.property section as a generic note
and just concatenates all .note.gnu.property sections from the input
to the output. On CET-enabled OS, the output of the older linker is
marked as CET enabled, but in fact, it is not CET enabled and it crashes
on CET-enabled machines.
This patch defines GNU_PROPERTY_X86_UINT32_VALID. Linker is updated to
set the GNU_PROPERTY_X86_UINT32_VALID bit in GNU property note for
non-relocatable output to differentiate outputs from the older linker.
bfd/
* elfxx-x86.c (_bfd_x86_elf_parse_gnu_properties): Mask out the
GNU_PROPERTY_X86_UINT32_VALID bit.
(_bfd_x86_elf_link_fixup_gnu_properties): Set the
GNU_PROPERTY_X86_UINT32_VALID bit for non-relocatable output.
binutils/
* readelf.c (print_gnu_property_note): Check the
GNU_PROPERTY_X86_UINT32_VALID bit for invalid GNU property note.
include/
* elf/common.h (GNU_PROPERTY_X86_UINT32_VALID): New.
* bfd/elf32-s12z.c: (opru18_reloc): New function.
* bfd/elf32-s12z.c: (elf_s12z_howto_table): Adjust Howto according to new knowledge.
* include/elf/s12z.h: Rename R_S12Z_UKNWN_3 to R_S12Z_EXT18.
This patch adds a few comments to include/elf/arm.h to clarify which
versions of the ARM ELF specification defined which headers. Given
that the EABI is pretty ubiquitous these days, I've marked anything
not based on that as deprecated.
There are no plans to remove any deprecated definitions at this time,
but any new development shouldn't be building upon support for
deprecated definitions remaining in the long term.
* elf/arm.h: Updated comments for e_flags definitions.
This patch series is a new binutils port for C-SKY processors, including support for both the V1 and V2 processor variants. V1 is derived from the MCore architecture while V2 is substantially different, with mixed 16- and 32-bit instructions, a larger register set, a different (but overlapping) ABI, etc. There is support for bare-metal ELF targets and Linux with both glibc and uClibc.
This code is being contributed jointly by C-SKY Microsystems and Mentor Graphics. C-SKY is responsible for the technical content and has proposed Lifang Xia and Yunhai Shang as port maintainers. (Note that C-SKY does have a corporate copyright assignment on file with the FSF.) Mentor Graphics' role has been cleaning up the code, adding documentation and additional test cases, etc, to address issues we anticipated reviewers would complain about.
bfd * Makefile.am (ALL_MACHINES, ALL_MACHINES_CFILES): Add C-SKY.
(BFD32_BACKENDS, BFD_BACKENDS_CFILES): Likewise.
* Makefile.in: Regenerated.
* archures.c (enum bfd_architecture): Add bfd_arch_csky and
related bfd_mach defines.
(bfd_csky_arch): Declare.
(bfd_archures_list): Add C-SKY.
* bfd-in.h (elf32_csky_build_stubs): Declare.
(elf32_csky_size_stubs): Declare.
(elf32_csky_next_input_section: Declare.
(elf32_csky_setup_section_lists): Declare.
* bfd-in2.h: Regenerated.
* config.bfd: Add C-SKY.
* configure.ac: Likewise.
* configure: Regenerated.
* cpu-csky.c: New file.
* elf-bfd.h (enum elf_target_id): Add C-SKY.
* elf32-csky.c: New file.
* libbfd.h: Regenerated.
* reloc.c: Add C-SKY relocations.
* targets.c (csky_elf32_be_vec, csky_elf32_le_vec): Declare.
(_bfd_target_vector): Add C-SKY target vector entries.
binutils* readelf.c: Include elf/csky.h.
(guess_is_rela): Handle EM_CSKY.
(dump_relocations): Likewise.
(get_machine_name): Likewise.
(is_32bit_abs_reloc): Likewise.
include * dis-asm.h (csky_symbol_is_valid): Declare.
* opcode/csky.h: New file.
opcodes * Makefile.am (TARGET_LIBOPCODES_CFILES): Add csky-dis.c.
* Makefile.in: Regenerated.
* configure.ac: Add C-SKY.
* configure: Regenerated.
* csky-dis.c: New file.
* csky-opc.h: New file.
* disassemble.c (ARCH_csky): Define.
(disassembler, disassemble_init_for_target): Add case for ARCH_csky.
* disassemble.h (print_insn_csky, csky_get_disassembler): Declare.
gas * Makefile.am (TARGET_CPU_CFILES): Add entry for C-SKY.
(TARGET_CPU_HFILES, TARGET_ENV_HFILES): Likewise.
* Makefile.in: Regenerated.
* config/tc-csky.c: New file.
* config/tc-csky.h: New file.
* config/te-csky_abiv1.h: New file.
* config/te-csky_abiv1_linux.h: New file.
* config/te-csky_abiv2.h: New file.
* config/te-csky_abiv2_linux.h: New file.
* configure.tgt: Add C-SKY.
* doc/Makefile.am (CPU_DOCS): Add entry for C-SKY.
* doc/Makefile.in: Regenerated.
* doc/all.texi: Set CSKY feature.
* doc/as.texi (Overview): Add C-SKY options.
(Machine Dependencies): Likewise.
* doc/c-csky.texi: New file.
* testsuite/gas/csky/*: New test cases.
ld * Makefile.am (ALL_EMULATION_SOURCES): Add C-SKY emulations.
(ecskyelf.c, ecskyelf_linux.c): New rules.
* Makefile.in: Regenerated.
* configure.tgt: Add C-SKY.
* emulparams/cskyelf.sh: New file.
* emulparams/cskyelf_linux.sh: New file.
* emultempl/cskyelf.em: New file.
* gen-doc.texi: Add C-SKY.
* ld.texi: Likewise.
(Options specific to C-SKY targets): New section.
* testsuite/ld-csky/*: New tests.
Fix an issue with commit 8095d2f70e ("MIPS/GAS: Split Loongson MMI
Instructions from loongson2f/3a"), AFL_ASE_MASK should be 0x0006ffff
instead of 0x0004ffff.
2018-07-27 Chenghua Xu <paul.hua.gm@gmail.com>
Maciej W. Rozycki <macro@linux-mips.org>
include/
* elf/mips.h (AFL_ASE_MASK): Correct typo.
This adds support for ".localentry 1", a new st_other
STO_PPC64_LOCAL_MASK encoding that signifies a function with a single
entry point like ".localentry 0", but unlike a ".localentry 0"
function does not preserve r2.
include/
* elf/ppc64.h: Specify byte offset to local entry for values
of two to six in STO_PPC64_LOCAL_MASK. Clarify r2 return
value for such functions when entering via global entry point.
Specify meaning of a value of one in STO_PPC64_LOCAL_MASK.
bfd/
* elf64-ppc.c (ppc64_elf_size_stubs): Use a ppc_stub_long_branch_r2off
for calls to symbols with STO_PPC64_LOCAL_MASK bits set to 1.
gas/
* config/tc-ppc.c (ppc_elf_localentry): Allow .localentry values
of 1 and 7 to directly set value into STO_PPC64_LOCAL_MASK bits.
ld/testsuite/
* ld-powerpc/elfv2.s: Add .localentry f5,1 testcase.
* ld-powerpc/elfv2exe.d: Update.
* ld-powerpc/elfv2so.d: Update.
The MMI instruction set has been implemented in many Loongson
processors. There is a lot of software optimized for MMI. This patch
splits MMI from loongson2f/3a, and adds GAS and disassembler options for
MMI instructions.
2018-07-20 Chenghua Xu <paul.hua.gm@gmail.com>
Maciej W. Rozycki <macro@mips.com>
bfd/
* elfxx-mips.c (print_mips_ases): Add MMI extension.
binutils/
* readelf.c (print_mips_ases): Add MMI extension.
gas/
* NEWS: Mention MultiMedia extensions Instructions (MMI)
support.
* config/tc-mips.c (options): Add OPTION_LOONGSON_MMI and
OPTION_NO_LOONGSON_MMI.
(md_longopts): Likewise.
(mips_ases): Define availability for MMI.
(mips_convert_ase_flags): Map ASE_LOONGSON_MMI to
AFL_ASE_LOONGSON_MMI.
(mips_cpu_info_table): Add ASE_LOONGSON_MMI for loongson2f/3a.
(md_show_usage): Add help for -mloongson-mmi and
-mno-loongson-mmi.
* doc/as.texi: Document -mloongson-mmi, -mno-loongson-mmi.
* doc/c-mips.texi: Document -mloongson-mmi, -mno-loongson-mmi,
.set loongson-mmi and .set noloongson-mmi.
* testsuite/gas/mips/loongson-2f.d: Move mmi test to ...
* testsuite/gas/mips/loongson-2f-mmi.d: Here. Add ISA/ASE
flag verification.
* testsuite/gas/mips/loongson-2f.s: Move mmi test to ...
* testsuite/gas/mips/loongson-2f-mmi.s: Here.
* testsuite/gas/mips/loongson-3a.d: Move mmi test to ...
* testsuite/gas/mips/loongson-3a-mmi.d: Here. Add ISA/ASE
flag verification.
* testsuite/gas/mips/loongson-3a.s: Move mmi test to ...
* testsuite/gas/mips/loongson-3a-mmi.s: Here.
* testsuite/gas/mips/mips.exp: Run loongson-2f-mmi and
loongson-3a-mmi tests.
include/
* elf/mips.h (AFL_ASE_MMI): New macro.
(AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_MMI.
* opcode/mips.h (ASE_LOONGSON_MMI): New macro.
opcodes/
* mips-dis.c (mips_arch_choices): Add MMI to loongson2f and
loongson3a descriptors.
(parse_mips_ase_option): Handle -M loongson-mmi option.
(print_mips_disassembler_options): Document -M loongson-mmi.
* mips-opc.c (LMMI): New macro.
(mips_opcodes): Replace IL2F|IL3A marking with LMMI for MMI
instructions.
For sections that are not SHT_NOBITS, use sh_offset and p_offset instead of
sh_addr and p_vaddr when calculating if a section fits in a segment. Both
methods are valid when using the GNU linker.
include/
* elf/internal.h (ELF_SECTION_IN_SEGMENT): Don’t check addresses
for non SHT_NOBITS.
Add support for the Global INValidate Application Specific Extension
for Release 6 of the MIPS Architecture.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS32
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 187-191
bfd/
* elfxx-mips.c (print_mips_ases): Add GINV extension.
binutils/
* readelf.c (print_mips_ases): Add GINV extension.
gas/
* NEWS: Mention MIPS Global INValidate ASE support.
* config/tc-mips.c (options): Add OPTION_GINV and OPTION_NO_GINV.
(md_longopts): Likewise.
(mips_ases): Define availability for GINV.
(mips_convert_ase_flags): Map ASE_GINV to AFL_ASE_GINV.
(md_show_usage): Add help for -mginv and -mno-ginv.
* doc/as.texinfo: Document -mginv, -mno-ginv.
* doc/c-mips.texi: Document -mginv, -mno-ginv, .set ginv and
.set noginv.
* testsuite/gas/mips/ase-errors-1.s: Add error checks for GINV
ASE.
* testsuite/gas/mips/ase-errors-2.s: Likewise.
* testsuite/gas/mips/ase-errors-1.l: Likewise.
* testsuite/gas/mips/ase-errors-2.l: Likewise.
* testsuite/gas/mips/ginv.d: New test.
* testsuite/gas/mips/ginv-err.d: New test.
* testsuite/gas/mips/ginv-err.l: New test stderr output.
* testsuite/gas/mips/ginv.s: New test source.
* testsuite/gas/mips/ginv-err.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
include/
* elf/mips.h (AFL_ASE_GINV, AFL_ASE_RESERVED1): New macros.
(AFL_ASE_MASK): Update to include AFL_ASE_GINV.
* opcode/mips.h: Document "+\" operand format.
(ASE_GINV): New macro.
opcodes/
* mips-dis.c (mips_arch_choices): Add GINV to mips32r6 and
mips64r6 descriptors.
(parse_mips_ase_option): Handle -Mginv option.
(print_mips_disassembler_options): Document -Mginv.
* mips-opc.c (decode_mips_operand) <+\>: New operand format.
(GINV): New macro.
(mips_opcodes): Define ginvi and ginvt.
Add support for the CRC Application Specific Extension for Release 6 of
the MIPS Architecture.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS32
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 143-148
[2] "MIPS Architecture for Programmers Volume II-A: The MIPS64
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00087, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 165-170
ChangeLog:
bfd/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* elfxx-mips.c (print_mips_ases): Add CRC.
binutils/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* readelf.c (print_mips_ases): Add CRC.
gas/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
Maciej W. Rozycki <macro@mips.com>
* config/tc-mips.c (options): Add OPTION_CRC and OPTION_NO_CRC.
(md_longopts): Likewise.
(md_show_usage): Add help for -mcrc and -mno-crc.
(mips_ases): Define availability for CRC and CRC64.
(mips_convert_ase_flags): Map ASE_CRC to AFL_ASE_CRC.
* doc/as.texinfo: Document -mcrc, -mno-crc.
* doc/c-mips.texi: Document -mcrc, -mno-crc, .set crc and
.set no-crc.
* testsuite/gas/mips/ase-errors-1.l: Add error checks for CRC
ASE.
* testsuite/gas/mips/ase-errors-2.l: Likewise.
* testsuite/gas/mips/ase-errors-1.s: Likewise.
* testsuite/gas/mips/ase-errors-2.s: Likewise.
* testsuite/gas/mips/crc.d: New test.
* testsuite/gas/mips/crc64.d: New test.
* testsuite/gas/mips/crc-err.d: New test.
* testsuite/gas/mips/crc64-err.d: New test.
* testsuite/gas/mips/crc-err.l: New test stderr output.
* testsuite/gas/mips/crc64-err.l: New test stderr output.
* testsuite/gas/mips/crc.s: New test source.
* testsuite/gas/mips/crc64.s: New test source.
* testsuite/gas/mips/crc-err.s: New test source.
* testsuite/gas/mips/crc64-err.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
include/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* elf/mips.h (AFL_ASE_CRC): New macro.
(AFL_ASE_MASK): Update to include AFL_ASE_CRC.
* opcode/mips.h (ASE_CRC): New macro.
* opcode/mips.h (ASE_CRC64): Likewise.
opcodes/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* mips-dis.c (mips_arch_choices): Add CRC and CRC64 ASEs.
* mips-opc.c (CRC, CRC64): New macros.
(mips_builtin_opcodes): Define crc32b, crc32h, crc32w,
crc32cb, crc32ch and crc32cw for CRC. Define crc32d and
crc32cd for CRC64.
xtensa disassembler does not use information from the .xt.prop sections
to switch between code/data disassembly in text sections. This may
result in incorrect disassembly when data is interpreted as code and
disassembler loses synchronization with instruction stream. Use .xt.prop
section information to correctly interpret code and data and synchronize
with instruction stream.
2018-06-04 Max Filippov <jcmvbkbc@gmail.com>
bfd/
* elf32-xtensa.c (xtensa_read_table_entries): Make global.
(compute_fill_extra_space): Drop declaration. Rename function to
xtensa_compute_fill_extra_space.
(compute_ebb_actions, remove_dead_literal): Update references to
compute_fill_extra_space.
include/
* elf/xtensa.h (xtensa_read_table_entries)
(xtensa_compute_fill_extra_space): New declarations.
opcodes/
* xtensa-dis.c (bfd.h, elf/xtensa.h): New includes.
(dis_private): Add new fields for property section tracking.
(xtensa_coalesce_insn_tables, xtensa_find_table_entry)
(xtensa_instruction_fits): New functions.
(fetch_data): Bump minimal fetch size to 4.
(print_insn_xtensa): Make struct dis_private static.
Load and prepare property table on section change.
Don't disassemble literals. Don't disassemble instructions that
cross property table boundaries.
bfd * Makefile.am: Add s12z files.
* Makefile.in: Regenerate.
* archures.c: Add bfd_s12z_arch.
* bfd-in.h: Add exports of bfd_putb24 and bfd_putl24.
* bfd-in2.h: Regenerate.
* config.bfd: Add s12z target.
* configure.ac: Add s12z target.
* configure: Regenerate.
* cpu-s12z.c: New file.
* elf32-s12z.c: New file.
* libbfd.c (bfd_putb24): New function.
(bfd_putl24): New function.
* libbfd.h: Regenerate.
* reloc.c: Add s12z relocations.
(bfd_get_reloc_size): Handle size 5 relocs.
* targets.c: Add s12z_elf32_vec.
opcodes * Makefile.am: Add support for s12z architecture.
* configure.ac: Likewise.
* disassemble.c: Likewise.
* disassemble.h: Likewise.
* Makefile.in: Regenerate.
* configure: Regenerate.
* s12z-dis.c: New file.
* s12z.h: New file.
include * elf/s12z.h: New header.
ld * Makefile.am: Add support for s12z architecture.
* configure.tgt: Likewise.
* Makefile.in: Regenerate.
* emulparams/m9s12zelf.sh: New file.
* scripttempl/elfm9s12z.sc: New file.
* testsuite/ld-discard/static.d: Expect to fail for the s12z
target.
* testsuite/ld-elf/endsym.d: Likewise.
* testsuite/ld-elf/merge.d: Likewise.
* testsuite/ld-elf/pr14926.d: Skip for the s12z target.
* testsuite/ld-elf/sec64k.exp: Likewise.
* testsuite/ld-s12z: New directory.
* testsuite/ld-s12z/opr-linking.d: New file.
* testsuite/ld-s12z/opr-linking.s: New file.
* testsuite/ld-s12z/relative-linking.d: New file.
* testsuite/ld-s12z/relative-linking.s: New file.
* testsuite/ld-s12z/z12s.exp: New file.
gas * Makefile.am: Add support for s12z target.
* Makefile.in: Regenerate.
* NEWS: Mention the new support.
* config/tc-s12z.c: New file.
* config/tc-s12z.h: New file.
* configure.tgt: Add s12z support.
* doc/Makefile.am: Likewise.
* doc/Makefile.in: Regenerate.
* doc/all.texi: Add s12z documentation.
* doc/as.textinfo: Likewise.
* doc/c-s12z.texi: New file.
* testsuite/gas/s12z: New directory.
* testsuite/gas/s12z/abs.d: New file.
* testsuite/gas/s12z/abs.s: New file.
* testsuite/gas/s12z/adc-imm.d: New file.
* testsuite/gas/s12z/adc-imm.s: New file.
* testsuite/gas/s12z/adc-opr.d: New file.
* testsuite/gas/s12z/adc-opr.s: New file.
* testsuite/gas/s12z/add-imm.d: New file.
* testsuite/gas/s12z/add-imm.s: New file.
* testsuite/gas/s12z/add-opr.d: New file.
* testsuite/gas/s12z/add-opr.s: New file.
* testsuite/gas/s12z/and-imm.d: New file.
* testsuite/gas/s12z/and-imm.s: New file.
* testsuite/gas/s12z/and-opr.d: New file.
* testsuite/gas/s12z/and-opr.s: New file.
* testsuite/gas/s12z/and-or-cc.d: New file.
* testsuite/gas/s12z/and-or-cc.s: New file.
* testsuite/gas/s12z/bfext-special.d: New file.
* testsuite/gas/s12z/bfext-special.s: New file.
* testsuite/gas/s12z/bfext.d: New file.
* testsuite/gas/s12z/bfext.s: New file.
* testsuite/gas/s12z/bit-manip.d: New file.
* testsuite/gas/s12z/bit-manip.s: New file.
* testsuite/gas/s12z/bit.d: New file.
* testsuite/gas/s12z/bit.s: New file.
* testsuite/gas/s12z/bra-expression-defined.d: New file.
* testsuite/gas/s12z/bra-expression-defined.s: New file.
* testsuite/gas/s12z/bra-expression-undef.d: New file.
* testsuite/gas/s12z/bra-expression-undef.s: New file.
* testsuite/gas/s12z/bra.d: New file.
* testsuite/gas/s12z/bra.s: New file.
* testsuite/gas/s12z/brclr-symbols.d: New file.
* testsuite/gas/s12z/brclr-symbols.s: New file.
* testsuite/gas/s12z/brset-clr-opr-imm-rel.d: New file.
* testsuite/gas/s12z/brset-clr-opr-imm-rel.s: New file.
* testsuite/gas/s12z/brset-clr-opr-reg-rel.d: New file.
* testsuite/gas/s12z/brset-clr-opr-reg-rel.s: New file.
* testsuite/gas/s12z/brset-clr-reg-imm-rel.d: New file.
* testsuite/gas/s12z/brset-clr-reg-imm-rel.s: New file.
* testsuite/gas/s12z/brset-clr-reg-reg-rel.d: New file.
* testsuite/gas/s12z/brset-clr-reg-reg-rel.s: New file.
* testsuite/gas/s12z/clb.d: New file.
* testsuite/gas/s12z/clb.s: New file.
* testsuite/gas/s12z/clr-opr.d: New file.
* testsuite/gas/s12z/clr-opr.s: New file.
* testsuite/gas/s12z/clr.d: New file.
* testsuite/gas/s12z/clr.s: New file.
* testsuite/gas/s12z/cmp-imm.d: New file.
* testsuite/gas/s12z/cmp-imm.s: New file.
* testsuite/gas/s12z/cmp-opr-inc.d: New file.
* testsuite/gas/s12z/cmp-opr-inc.s: New file.
* testsuite/gas/s12z/cmp-opr-rdirect.d: New file.
* testsuite/gas/s12z/cmp-opr-rdirect.s: New file.
* testsuite/gas/s12z/cmp-opr-reg.d: New file.
* testsuite/gas/s12z/cmp-opr-reg.s: New file.
* testsuite/gas/s12z/cmp-opr-rindirect.d: New file.
* testsuite/gas/s12z/cmp-opr-rindirect.s: New file.
* testsuite/gas/s12z/cmp-opr-sxe4.d: New file.
* testsuite/gas/s12z/cmp-opr-sxe4.s: New file.
* testsuite/gas/s12z/cmp-opr-xys.d: New file.
* testsuite/gas/s12z/cmp-opr-xys.s: New file.
* testsuite/gas/s12z/cmp-s-imm.d: New file.
* testsuite/gas/s12z/cmp-s-imm.s: New file.
* testsuite/gas/s12z/cmp-s-opr.d: New file.
* testsuite/gas/s12z/cmp-s-opr.s: New file.
* testsuite/gas/s12z/cmp-xy.d: New file.
* testsuite/gas/s12z/cmp-xy.s: New file.
* testsuite/gas/s12z/com-opr.d: New file.
* testsuite/gas/s12z/com-opr.s: New file.
* testsuite/gas/s12z/complex-shifts.d: New file.
* testsuite/gas/s12z/complex-shifts.s: New file.
* testsuite/gas/s12z/db-tb-cc-opr.d: New file.
* testsuite/gas/s12z/db-tb-cc-opr.s: New file.
* testsuite/gas/s12z/db-tb-cc-reg.d: New file.
* testsuite/gas/s12z/db-tb-cc-reg.s: New file.
* testsuite/gas/s12z/dbCC.d: New file.
* testsuite/gas/s12z/dbCC.s: New file.
* testsuite/gas/s12z/dec-opr.d: New file.
* testsuite/gas/s12z/dec-opr.s: New file.
* testsuite/gas/s12z/dec.d: New file.
* testsuite/gas/s12z/dec.s: New file.
* testsuite/gas/s12z/div.d: New file.
* testsuite/gas/s12z/div.s: New file.
* testsuite/gas/s12z/eor.d: New file.
* testsuite/gas/s12z/eor.s: New file.
* testsuite/gas/s12z/exg.d: New file.
* testsuite/gas/s12z/exg.s: New file.
* testsuite/gas/s12z/ext24-ld-xy.d: New file.
* testsuite/gas/s12z/ext24-ld-xy.s: New file.
* testsuite/gas/s12z/inc-opr.d: New file.
* testsuite/gas/s12z/inc-opr.s: New file.
* testsuite/gas/s12z/inc.d: New file.
* testsuite/gas/s12z/inc.s: New file.
* testsuite/gas/s12z/inh.d: New file.
* testsuite/gas/s12z/inh.s: New file.
* testsuite/gas/s12z/jmp.d: New file.
* testsuite/gas/s12z/jmp.s: New file.
* testsuite/gas/s12z/jsr.d: New file.
* testsuite/gas/s12z/jsr.s: New file.
* testsuite/gas/s12z/ld-imm-page2.d: New file.
* testsuite/gas/s12z/ld-imm-page2.s: New file.
* testsuite/gas/s12z/ld-imm.d: New file.
* testsuite/gas/s12z/ld-imm.s: New file.
* testsuite/gas/s12z/ld-immu18.d: New file.
* testsuite/gas/s12z/ld-immu18.s: New file.
* testsuite/gas/s12z/ld-large-direct.d: New file.
* testsuite/gas/s12z/ld-large-direct.s: New file.
* testsuite/gas/s12z/ld-opr.d: New file.
* testsuite/gas/s12z/ld-opr.s: New file.
* testsuite/gas/s12z/ld-s-opr.d: New file.
* testsuite/gas/s12z/ld-s-opr.s: New file.
* testsuite/gas/s12z/ld-small-direct.d: New file.
* testsuite/gas/s12z/ld-small-direct.s: New file.
* testsuite/gas/s12z/lea-immu18.d: New file.
* testsuite/gas/s12z/lea-immu18.s: New file.
* testsuite/gas/s12z/lea.d: New file.
* testsuite/gas/s12z/lea.s: New file.
* testsuite/gas/s12z/mac.d: New file.
* testsuite/gas/s12z/mac.s: New file.
* testsuite/gas/s12z/min-max.d: New file.
* testsuite/gas/s12z/min-max.s: New file.
* testsuite/gas/s12z/mod.d: New file.
* testsuite/gas/s12z/mod.s: New file.
* testsuite/gas/s12z/mov.d: New file.
* testsuite/gas/s12z/mov.s: New file.
* testsuite/gas/s12z/mul-imm.d: New file.
* testsuite/gas/s12z/mul-imm.s: New file.
* testsuite/gas/s12z/mul-opr-opr.d: New file.
* testsuite/gas/s12z/mul-opr-opr.s: New file.
* testsuite/gas/s12z/mul-opr.d: New file.
* testsuite/gas/s12z/mul-opr.s: New file.
* testsuite/gas/s12z/mul-reg.d: New file.
* testsuite/gas/s12z/mul-reg.s: New file.
* testsuite/gas/s12z/mul.d: New file.
* testsuite/gas/s12z/mul.s: New file.
* testsuite/gas/s12z/neg-opr.d: New file.
* testsuite/gas/s12z/neg-opr.s: New file.
* testsuite/gas/s12z/not-so-simple-shifts.d: New file.
* testsuite/gas/s12z/not-so-simple-shifts.s: New file.
* testsuite/gas/s12z/opr-18u.d: New file.
* testsuite/gas/s12z/opr-18u.s: New file.
* testsuite/gas/s12z/opr-expr.d: New file.
* testsuite/gas/s12z/opr-expr.s: New file.
* testsuite/gas/s12z/opr-ext-18.d: New file.
* testsuite/gas/s12z/opr-ext-18.s: New file.
* testsuite/gas/s12z/opr-idx-24-reg.d: New file.
* testsuite/gas/s12z/opr-idx-24-reg.s: New file.
* testsuite/gas/s12z/opr-idx3-reg.d: New file.
* testsuite/gas/s12z/opr-idx3-reg.s: New file.
* testsuite/gas/s12z/opr-idx3-xysp-24.d: New file.
* testsuite/gas/s12z/opr-idx3-xysp-24.s: New file.
* testsuite/gas/s12z/opr-indirect-expr.d: New file.
* testsuite/gas/s12z/opr-indirect-expr.s: New file.
* testsuite/gas/s12z/opr-symbol.d: New file.
* testsuite/gas/s12z/opr-symbol.s: New file.
* testsuite/gas/s12z/or-imm.d: New file.
* testsuite/gas/s12z/or-imm.s: New file.
* testsuite/gas/s12z/or-opr.d: New file.
* testsuite/gas/s12z/or-opr.s: New file.
* testsuite/gas/s12z/p2-mul.d: New file.
* testsuite/gas/s12z/p2-mul.s: New file.
* testsuite/gas/s12z/page2-inh.d: New file.
* testsuite/gas/s12z/page2-inh.s: New file.
* testsuite/gas/s12z/psh-pul.d: New file.
* testsuite/gas/s12z/psh-pul.s: New file.
* testsuite/gas/s12z/qmul.d: New file.
* testsuite/gas/s12z/qmul.s: New file.
* testsuite/gas/s12z/rotate.d: New file.
* testsuite/gas/s12z/rotate.s: New file.
* testsuite/gas/s12z/s12z.exp: New file.
* testsuite/gas/s12z/sat.d: New file.
* testsuite/gas/s12z/sat.s: New file.
* testsuite/gas/s12z/sbc-imm.d: New file.
* testsuite/gas/s12z/sbc-imm.s: New file.
* testsuite/gas/s12z/sbc-opr.d: New file.
* testsuite/gas/s12z/sbc-opr.s: New file.
* testsuite/gas/s12z/shift.d: New file.
* testsuite/gas/s12z/shift.s: New file.
* testsuite/gas/s12z/simple-shift.d: New file.
* testsuite/gas/s12z/simple-shift.s: New file.
* testsuite/gas/s12z/single-ops.d: New file.
* testsuite/gas/s12z/single-ops.s: New file.
* testsuite/gas/s12z/specd6.d: New file.
* testsuite/gas/s12z/specd6.s: New file.
* testsuite/gas/s12z/st-large-direct.d: New file.
* testsuite/gas/s12z/st-large-direct.s: New file.
* testsuite/gas/s12z/st-opr.d: New file.
* testsuite/gas/s12z/st-opr.s: New file.
* testsuite/gas/s12z/st-s-opr.d: New file.
* testsuite/gas/s12z/st-s-opr.s: New file.
* testsuite/gas/s12z/st-small-direct.d: New file.
* testsuite/gas/s12z/st-small-direct.s: New file.
* testsuite/gas/s12z/st-xy.d: New file.
* testsuite/gas/s12z/st-xy.s: New file.
* testsuite/gas/s12z/sub-imm.d: New file.
* testsuite/gas/s12z/sub-imm.s: New file.
* testsuite/gas/s12z/sub-opr.d: New file.
* testsuite/gas/s12z/sub-opr.s: New file.
* testsuite/gas/s12z/tfr.d: New file.
* testsuite/gas/s12z/tfr.s: New file.
* testsuite/gas/s12z/trap.d: New file.
* testsuite/gas/s12z/trap.s: New file.
binutils* readelf.c: Add support for s12z architecture.
* testsuite/lib/binutils-common.exp (is_elf_format): Excluse s12z
targets.
Define and handle TLS relocations for FDPIC in BFD and gas.
In gas, the new relocations are rejected if the --fdpic option was not
specified.
We also define the __tdata_start symbol to mark the start of the
.tdata section. This allows FDPIC static binaries to find the start of
.tdata section, since phdr->p_vaddr of TLS segment is not a valid
value for FDPIC.
2018-04-25 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
bfd/:
* bfd-in2.h (BFD_RELOC_ARM_TLS_GD32_FDPIC)
(BFD_RELOC_ARM_TLS_LDM32_FDPIC, BFD_RELOC_ARM_TLS_IE32_FDPIC): New
relocations.
* elf32-arm.c (elf32_arm_howto_table_2): Add R_ARM_TLS_GD32_FDPIC,
R_ARM_TLS_LDM32_FDPIC, R_ARM_TLS_IE32_FDPIC relocations.
(elf32_arm_reloc_map): Add R_ARM_TLS_GD32_FDPIC,
R_ARM_TLS_LDM32_FDPIC, R_ARM_TLS_IE32_FDPIC.
(struct elf32_arm_link_hash_table): Update comment.
(elf32_arm_final_link_relocate): Handle TLS FDPIC relocations.
(IS_ARM_TLS_RELOC): Likewise.
(elf32_arm_check_relocs): Likewise.
(allocate_dynrelocs_for_symbol): Likewise.
(elf32_arm_size_dynamic_sections): Update comment.
* reloc.c: Add BFD_RELOC_ARM_TLS_GD32_FDPIC,
BFD_RELOC_ARM_TLS_LDM32_FDPIC, BFD_RELOC_ARM_TLS_IE32_FDPIC.
gas/
* config/tc-arm.c (reloc_names): Add TLSGD_FDPIC, TLSLDM_FDPIC,
GOTTPOFF_FDIC relocations.
(md_apply_fix): Handle the new TLS FDPIC relocations.
(tc_gen_reloc): Likewise.
(arm_fix_adjustable): Likewise.
include/
* elf/arm.h: Add R_ARM_TLS_GD32_FDPIC, R_ARM_TLS_LDM32_FDPIC,
R_ARM_TLS_IE32_FDPIC.
ld/
* scripttempl/elf.sc: Define __tdata_start for .tdata section.
ELF files targetting ARM FDPIC use the ELFOSABI_ARM_FDPIC flag.
Set it appropriately in file generators (eg. gas), and handle it in
readers (eg. readelf).
2018-04-25 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
bfd/
* elf32-arm.c (elf32_arm_print_private_bfd_data): Support
EF_ARM_PIC and ELFOSABI_ARM_FDPIC.
(elf32_arm_post_process_headers): Support ELFOSABI_ARM_FDPIC.
(ELF_OSABI): Define to ELFOSABI_ARM_FDPIC.
binutils/
* readelf.c (decode_ARM_machine_flags): Support EF_ARM_PIC.
(get_osabi_name): Support ELFOSABI_ARM_FDPIC.
gas/
* config/tc-arm.c (arm_fdpic): New.
(elf32_arm_target_format): Support FDPIC.
(OPTION_FDPIC): New.
(md_longopts): Support FDPIC.
(md_parse_option): Likewise.
(md_show_usage): Likewise.
include/
* elf/arm.h (EF_ARM_FDPIC): New.
Andrew Sadek <andrew.sadek.se@gmail.com>
A new implemented feature in GCC Microblaze that allows Position
Independent Code to run using Data Text Relative addressing instead
of using Global Offset Table.
Its aim was to make 'PIC' more efficient and flexible as elf size
excess performance overhead were noticed when using GOT due to the
indirect addressing.
include/ChangeLog:
* bfdlink.h (Add flag): Add new flag @ 'bfd_link_info' struct.
* elf/microblaze.h (Add 3 new relocations):
R_MICROBLAZE_TEXTPCREL_64, R_MICROBLAZE_TEXTREL_64
and R_MICROBLAZE_TEXTREL_32_LO for relax function.
bfd/ChangeLog:
* bfd/reloc.c (2 new BFD relocations):
BFD_RELOC_MICROBLAZE_64_TEXTPCREL &
BFD_RELOC_MICROBLAZE_64_TEXTPCREL
* bfd/bfd-in2.h: Regenerate
* bfd/libbfd.h: Regenerate
* bfd/elf32-microblaze.c (Handle new relocs): define 'HOWTO' of 3
new relocs and handle them in both relocate and relax functions.
(microblaze_elf_reloc_type_lookup): add mapping between for new
bfd relocs.
(microblaze_elf_relocate_section): Handle new relocs in case of
elf relocation.
(microblaze_elf_relax_section): Handle new relocs for elf relaxation.
gas/ChangeLog:
* gas/config/tc-microblaze.c (Handle new relocs directives in
assembler): Handle new relocs from compiler output.
(imm_types): add new imm types for data text relative addressing
TEXT_OFFSET, TEXT_PC_OFFSET
(md_convert_frag): conversion for BFD_RELOC_MICROBLAZE_64_TEXTPCREL,
BFD_RELOC_MICROBLAZE_64_TEXTPCREL
(md_apply_fix): apply fix for BFD_RELOC_MICROBLAZE_64_TEXTPCREL,
BFD_RELOC_MICROBLAZE_64_TEXTPCREL
(md_estimate_size_before_relax): estimate size for
BFD_RELOC_MICROBLAZE_64_TEXTPCREL,
BFD_RELOC_MICROBLAZE_64_TEXTPCREL
(tc_gen_reloc): generate relocations for
BFD_RELOC_MICROBLAZE_64_TEXTPCREL,
BFD_RELOC_MICROBLAZE_64_TEXTPCREL
ld/ChangeLog:
* ld/lexsup.c (Add 2 ld options):
(ld_options): add disable-multiple-abs-defs @ 'ld_options' array
(parse_args): parse new option and pass flag to 'link_info' struct.
* ld/ldlex.h (Add enum): add new enum @ 'option_values' enum.
* ld/ld.texinfo (Add new option): Add description for
'disable-multiple-abs-defs'
* ld/main.c: Initialize flags with false @ 'main'. Handle
disable-multiple-abs-defs @ 'mutiple_definition'.
In addition to the existing relocs we need two more to mark all
instructions in the call sequence, PLTCALL on the call itself (plus
the toc restore insn for ppc64), and PLTSEQ on others. All
relocations in a particular sequence have the same symbol.
Example ppc64 ELFv2 assembly:
.reloc .,R_PPC64_PLTSEQ,puts
std 2,24(1)
addis 12,2,puts@plt@ha # .reloc .,R_PPC64_PLT16_HA,puts
ld 12,puts@plt@l(12) # .reloc .,R_PPC64_PLT16_LO_DS,puts
.reloc .,R_PPC64_PLTSEQ,puts
mtctr 12
.reloc .,R_PPC64_PLTCALL,puts
bctrl
ld 2,24(1)
Example ppc32 -fPIC assembly:
addis 12,30,puts+32768@plt@ha # .reloc .,R_PPC_PLT16_HA,puts+0x8000
lwz 12,12,puts+32768@plt@l # .reloc .,R_PPC_PLT16_LO,puts+0x8000
.reloc .,R_PPC_PLTSEQ,puts+32768
mtctr 12
.reloc .,R_PPC_PLTCALL,puts+32768
bctrl
Marking sequences like this allows the linker to convert them to nops
and a direct call if the target symbol turns out to be local.
When the call is __tls_get_addr, each relocation shown above is paired
with an R_PPC*_TLSLD or R_PPC*_TLSGD reloc to additionally mark the
sequence for possible TLS optimization. The TLSLD or TLSGD relocs are
emitted first.
include/
* elf/ppc.h (R_PPC_PLTSEQ, R_PPC_PLTCALL): Define.
* elf/ppc64.h (R_PPC64_PLTSEQ, R_PPC64_PLTCALL): Define.
bfd/
* elf32-ppc.c (ppc_elf_howto_raw): Add PLTSEQ and PLTCALL howtos.
(is_plt_seq_reloc): New function.
(ppc_elf_check_relocs): Handle PLTSEQ and PLTCALL relocs.
(ppc_elf_tls_optimize): Handle inline plt call sequence.
(ppc_elf_relax_section): Handle PLTCALL reloc.
(ppc_elf_relocate_section): Nop out inline plt call sequence when
resolving locally.
* elf64-ppc.c (ppc64_elf_howto_raw): Add R_PPC64_PLTSEQ and
R_PPC64_PLTCALL entries. Comment R_PPC64_TOCSAVE.
(has_tls_get_addr_call): Correct comment.
(is_branch_reloc): Add PLTCALL.
(is_plt_seq_reloc): New function.
(ppc64_elf_check_relocs): Handle PLT16_LO_DS reloc. Set
has_tls_reloc for R_PPC64_TLSGD and R_PPC64_TLSLD. Create plt
entry for R_PPC64_PLTCALL.
(ppc64_elf_tls_optimize): Handle inline plt call sequence.
(ppc_type_of_stub): Handle PLTCALL reloc.
(toc_adjusting_stub_needed): Likewise.
(ppc64_elf_relocate_section): Set "can_plt_call" for PLTCALL
reloc insn. Nop out inline plt call sequence when resolving
locally. Handle __tls_get_addr inline plt call optimization.
elfcpp/
* powerpc.h (R_POWERPC_PLTSEQ, R_POWERPC_PLTCALL): Define.
gold/
* powerpc.cc (Target_powerpc::Track_tls::maybe_skip_tls_get_addr_call):
Handle inline plt sequence relocs.
(Stub_table::Plt_stub_key::Plt_stub_key): Likewise.
(Target_powerpc::Scan::reloc_needs_plt_for_ifunc): Likewise.
(Target_powerpc::Relocate::relocate): Likewise.
This patch adds the following relocation support into binutils gas.
BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12_NC.
Those relocations includes both ip64 and ilp32 variant.
The following bits in DT_FLAGS_1 are used by Solaris:
#define DF_1_KMOD 0x10000000 /* kernel module */
#define DF_1_WEAKFILTER 0x20000000 /* apply weak binding to DT_FILTER */
#define DF_1_NOCOMMON 0x40000000 /* no COMMON symbols exist */
binutils/
* readelf.c (process_dynamic_section): Also dump DF_1_KMOD,
DF_1_WEAKFILTER and DF_1_NOCOMMON.
include/
* elf/common.h (DF_1_KMOD): New.
(DF_1_WEAKFILTER): Likewise.
(DF_1_NOCOMMON): Likewise.
CORE PT_NOTE segments may have p_align values of 0 or 1. gABI specifies
that PT_NOTE alignment should be aligned to 4 bytes for 32-bit objects
and to 8 bytes for 64-bit objects. If segment alignment is less than 4,
we use 4 byte alignment.
This reverts commit 650444eb54.
With this patch, running the GDB test case gdb.base/auxv.exp is stuck in
an infinite loop, consuming memory to the point that it renders the
machine unusable. I am reverting it so we can take our time to
investigate while not killing all the developers' machines.
According to gABI, in a note entry, the note name field, not note name
size, is padded for the note descriptor. And the note descriptor field,
not note descriptor size, is padded for the next note entry. Also notes
are aligned to 4 bytes in 32-bit objects and 8 bytes in 64-bit objects.
Since on Linux, .note.ABI-tag and .note.gnu.build-id notes are always
aligned to 4 bytes, we need to use alignment of note section or note
segment, instead of assuming alignment based on ELF file class.
Tested on i686 and x86-64.
bfd/
PR binutils/22444
* elf.c (elf_read_notes): Add an argument for note aligment.
(elf_parse_notes): Likewise.
(_bfd_elf_make_section_from_shdr): Pass section aligment to
elf_parse_notes.
(bfd_section_from_phdr): Pass segment aligment to elf_read_notes.
(elf_parse_notes): Add an argument for note aligment. Use
ELF_NOTE_DESC_OFFSET to get the offset of the note descriptor.
Use ELF_NOTE_NEXT_OFFSET to get the offset of the next note
entry.
(elf_read_notes): Add an argument for note aligment and pass it
to elf_parse_notes.
binutils/
PR binutils/22444
* readelf.c (process_notes_at): Use ELF_NOTE_DESC_OFFSET to get
the offset of the note descriptor. Use ELF_NOTE_NEXT_OFFSET to
get the offset of the next note entry.
include/
PR binutils/22444
* elf/external.h (ELF_ALIGN_UP): New.
(ELF_NOTE_DESC_OFFSET): Likewise.
(ELF_NOTE_NEXT_OFFSET): Likewise.
FT32B is a new FT32 family member. It has a code
compression scheme, which requires the use of linker
relaxations. The change is quite large, so submission
is in several parts.
Part 1 adds a 15-bit instruction field, and CPU-specific functions for
the code compression that are used in binutils and GDB.
bfd/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elf32-ft32.c: Add HOWTO R_FT32_15.
* reloc.c: Add BFD_RELOC_FT32_15.
gas/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* config/tc-ft32.c (md_assemble): Replace FT32_FLD_K8 with
K15.
(md_apply_fix, tc_gen_reloc): Add BFD_RELOC_FT32_15.
include/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* elf/ft32.h: Add R_FT32_15.
* opcode/ft32.h: Replace FT32_FLD_K8 with K15.
(ft32_shortcode, sc_compar, ft32_split_shortcode,
ft32_merge_shortcode, ft32_merge_shortcode): New functions.
opcodes/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* opcodes/ft32-dis.c (print_insn_ft32): Replace FT32_FLD_K8 with K15.
* opcodes/ft32-opc.c (ft32_opc_info): Replace FT32_FLD_K8 with
K15. Add jmpix pattern.
sim/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* sim/ft32/interp.c (step_once): Replace FT32_FLD_K8 with K15.
FreeBSD recently added two additional ELF auxiliary vectors. FreeBSD's
AT_HWCAP uses a different number compared to AT_HWCAP on Linux as the
numerical value was already in use for a different vector on FreeBSD.
include/ChangeLog:
* elf/common.h (AT_FREEBSD_EHDRFLAGS, AT_FREEBSD_HWCAP): Define.
gdb/ChangeLog:
* fbsd-tdep.c (fbsd_print_auxv_entry): Handle AT_EHDRFLAGS and
AT_HWCAP.
Add new note types available since Linux 4.8 to elf/common.h and
make the 'readelf' tool aware of it.
include/
* elf/common.h (NT_PPC_TAR): New macro.
(NT_PPC_PPR): Likewise.
(NT_PPC_DSCR): Likewise.
(NT_PPC_EBB): Likewise.
(NT_PPC_PMU): Likewise.
(NT_PPC_TM_CGPR): Likewise.
(NT_PPC_TM_CFPR): Likewise.
(NT_PPC_TM_CVMX): Likewise.
(NT_PPC_TM_CVSX): Likewise.
(NT_PPC_TM_SPR): Likewise.
(NT_PPC_TM_CTAR): Likewise.
(NT_PPC_TM_CPPR): Likewise.
(NT_PPC_TM_CDSCR): Likewise.
binutils/
* readelf.c (get_note_type): Handle PPC note types available
since Linux 4.8.
The following relocation types were added to GCC/binutils:
ARC_JLI_SECTOFF is a relocation type in Metaware that is now used by
GCC as well to adjust the index of function calls to functions with
attribute jli_call_always.
bfd/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
John Eric Martin <John.Martin@emmicro-us.com>
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elf32-arc.c (JLI): Define.
* reloc.c: Add JLI relocations.
gas/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/jli-1.d: New file.
* testsuite/gas/arc/jli-1.s: Likewise.
* testsuite/gas/arc/taux.d: Update for jli_base.
include/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
John Eric Martin <John.Martin@emmicro-us.com>
* elf/arc-reloc.def: Add JLI relocs howto.
* opcode/arc-func.h (replace_jli): New function.
ld/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
John Eric Martin <John.Martin@emmicro-us.com>
* emulparams/arcelf.sh (JLI_START_TABLE): Define.
* scripttempl/elfarc.sc: Handle jlitab section.
* scripttempl/elfarcv2.sc: Likewise.
* testsuite/ld-arc/arc.exp: Add JLI test.
* testsuite/ld-arc/jli-script.ld: New file.
* testsuite/ld-arc/jli-simple.dd: Likewise.
* testsuite/ld-arc/jli-simple.rd: Likewise.
* testsuite/ld-arc/jli-simple.s: Likewise.
* testsuite/ld/testsuite/ld-arc/jli-overflow.s: Likewise.
* testsuite/ld/testsuite/ld-arc/jli-overflow.d: Likewise.
* testsuite/ld/testsuite/ld-arc/jli-overflow.err: Likewise.
opcode/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
John Eric Martin <John.Martin@emmicro-us.com>
* arc-opc.c (UIMM10_6_S_JLIOFF): Define.
(UIMM3_23): Adjust accordingly.
* arc-regs.h: Add/correct jli_base register.
* arc-tbl.h (jli_s): Likewise.
This core dump note contains the same information returned by the
ptrace PT_LWPINFO operation for each LWP belonging to a process.
binutils/ChangeLog:
* readelf.c (get_freebsd_elfcore_note_type): Handle
NT_FREEBSD_PTLWPINFO.
include/ChangeLog:
* elf/common.h (NT_FREEBSD_PTLWPINFO): Define.
Newer Linux kernel versions offer two new register sets in support of the
z/Architecture's guarded storage facility: NT_S390_GS_CB, the
"guarded-storage registers", and NT_S390_GS_BC, the "guarded-storage
broadcast control block". This patch adds support for the respective core
notes sections to binutils.
bfd/ChangeLog:
* elf-bfd.h (elfcore_write_s390_gs_cb): Add prototype.
(elfcore_write_s390_gs_bc): Likewise.
* elf.c (elfcore_grok_s390_gs_cb): New function.
(elfcore_grok_s390_gs_bc): New function.
(elfcore_grok_note): Call them.
(elfcore_write_s390_gs_cb): New function.
(elfcore_write_s390_gs_bc): New function.
(elfcore_write_register_note): Call them.
binutils/ChangeLog:
* readelf.c (get_note_type): Add NT_S390_GS_CB and NT_S390_GS_BC.
include/ChangeLog:
* elf/common.h (NT_S390_GS_CB): New macro.
(NT_S390_GS_BC): Likewise.
Add support for the Imagination interAptiv MR2 MIPS32r3 processor with
the MIPS16e2 ASE as per documentation, including in particular:
1. Support for implementation-specific interAptiv MR2 COPYW and UCOPYW
MIPS16e2 instructions[1], for assembly and disassembly,
2. Support for implementation-specific interAptiv MR2 SAVE and RESTORE
regular MIPS instructions[2], for assembly and disassembly,
3. ELF binary file annotation for the interAptiv MR2 MIPS architecture
extension.
4. Support for interAptiv MR2 architecture selection for assembly, in
the form of the `-march=interaptiv-mr2' command-line option and its
corresponding `arch=interaptiv-mr2' setting for the `.set' and
`.module' pseudo-ops.
5. Support for interAptiv MR2 architecture selection for disassembly,
in the form of the `mips:interaptiv-mr2' target architecture, for
use e.g. with the `-m' command-line option for `objdump'.
Parts of this change by Matthew Fortune and Andrew Bennett.
References:
[1] "MIPS32 interAptiv Multiprocessing System Software User's Manual",
Imagination Technologies Ltd., Document Number: MD00904, Revision
02.01, June 15, 2016, Section 24.3 "MIPS16e2 Implementation Specific
Instructions", pp. 878-883
[2] same, Chapter 25 "Implementation-specific Instructions", pp. 911-917
include/
* elf/mips.h (E_MIPS_MACH_IAMR2): New macro.
(AFL_EXT_INTERAPTIV_MR2): Likewise.
* opcode/mips.h: Document new operand codes defined.
(INSN_INTERAPTIV_MR2): New macro.
(INSN_CHIP_MASK): Adjust accordingly.
(CPU_INTERAPTIV_MR2): New macro.
(cpu_is_member) <CPU_INTERAPTIV_MR2>: New case.
(MIPS16_ALL_ARGS): Rename to...
(MIPS_SVRS_ALL_ARGS): ... this.
(MIPS16_ALL_STATICS): Rename to...
(MIPS_SVRS_ALL_STATICS): ... this.
bfd/
* archures.c (bfd_mach_mips_interaptiv_mr2): New macro.
* cpu-mips.c (I_interaptiv_mr2): New enum value.
(arch_info_struct): Add "mips:interaptiv-mr2" entry.
* elfxx-mips.c (_bfd_elf_mips_mach) <E_MIPS_MACH_IAMR2>: New
case.
(mips_set_isa_flags) <bfd_mach_mips_interaptiv_mr2>: Likewise.
(bfd_mips_isa_ext) <bfd_mach_mips_interaptiv_mr2>: Likewise.
(print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise.
(mips_mach_extensions): Add `bfd_mach_mipsisa32r3' and
`bfd_mach_mips_interaptiv_mr2' entries.
* bfd-in2.h: Regenerate.
opcodes/
* mips-formats.h (INT_BIAS): New macro.
(INT_ADJ): Redefine in INT_BIAS terms.
* mips-dis.c (mips_arch_choices): Add "interaptiv-mr2" entry.
(mips_print_save_restore): New function.
(print_insn_arg) <OP_SAVE_RESTORE_LIST>: Update comment.
(validate_insn_args) <OP_SAVE_RESTORE_LIST>: Remove `abort'
call.
(print_insn_args): Handle OP_SAVE_RESTORE_LIST.
(print_mips16_insn_arg): Call `mips_print_save_restore' for
OP_SAVE_RESTORE_LIST handling, factored out from here.
* mips-opc.c (decode_mips_operand) <'-'> <'m'>: New case.
(RD_31, RD_SP, WR_SP, MOD_SP, IAMR2): New macros.
(mips_builtin_opcodes): Add "restore" and "save" entries.
* mips16-opc.c (decode_mips16_operand) <'n', 'o'>: New cases.
(IAMR2): New macro.
(mips16_opcodes): Add "copyw" and "ucopyw" entries.
binutils/
* readelf.c (get_machine_flags) <E_MIPS_MACH_IAMR2>: New case.
(print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise.
* NEWS: Mention Imagination interAptiv MR2 processor support.
gas/
* config/tc-mips.c (validate_mips_insn): Handle
OP_SAVE_RESTORE_LIST specially.
(mips_encode_save_restore, mips16_encode_save_restore): New
functions.
(match_save_restore_list_operand): Factor out SAVE/RESTORE
operand insertion into the instruction word or halfword to these
new functions.
(mips_cpu_info_table): Add "interaptiv-mr2" entry.
* doc/c-mips.texi (MIPS Options): Add `interaptiv-mr2' to the
`-march=' argument list.
The symbol address in .eh_frame may be adjusted in
_bfd_elf_discard_section_eh_frame, and the content of .eh_frame will be
adjusted in _bfd_elf_write_section_eh_frame. Therefore, we cannot insert
a relocation whose addend symbol is in .eh_frame. Othrewise, the value
may be adjusted twice.
bfd/ChangeLog
2017-06-26 Kuan-Lin Chen <rufus@andestech.com>
* elfnn-riscv.c (perform_relocation): Support the new
R_RISCV_32_PCREL relocation.
(riscv_elf_relocate_section): Likewise.
* elfxx-riscv.c (howto_table): Likewise.
(riscv_reloc_map): Likewise.
* bfd-in2.h (BFD_RELOC_RISCV_32_PCREL): New relocation.
* libbfd.h: Regenerate.
gas/ChangeLog
2017-06-26 Kuan-Lin Chen <rufus@andestech.com>
* config/tc-riscv.c (md_apply_fix) [BFD_RELOC_32]: Convert to a
R_RISCV_32_PCREL relocation.
include/ChangeLog
2017-06-26 Kuan-Lin Chen <rufus@andestech.com>
* elf/riscv.h (R_RISCV_32_PCREL): New.
=== Context ===
This patch is part of a patch series to add support for ARMv8-R
architecture. Its purpose is to add support for ARMv8-R in GAS:
instructions, build attributes and readelf.
=== Patch description ===
Although some differences exist for system registers, from GAS point of
view ARMv8-R supports the same instructions as ARMv8-A Aarch32 state
and a subset of its extensions. This patch therefore introduce a new
feature bit to distinguish the availability of the pan, ras and rdma
extensions between ARMv8-A and ARMv8-R and allow crypto, fp and simd
extensions to be used by ARMv8-R.
Most of the changes are then in the testsuite to (i) rename source files
and error output to be shared between ARMv8-A and ARMv8-R, (ii) rename
files with expected output for ARMv8-A build attributes and (iii) add
new files with expected output for ARMv8-R build attributes.
2017-06-24 Thomas Preud'homme <thomas.preudhomme@arm.com>
binutils/
* readelf.c (arm_attr_tag_CPU_arch): Fill value for ARMv8-R.
gas/
* NEWS: Mention support for ARMv8-R architecture.
* config/tc-arm.c (arm_archs): Add entry for ARMv8-R.
(arm_extensions): Restrict pan, ras and rdma extension to
ARMv8-A and make crypto, fp and simd extensions available to
ARMv8-R.
(cpu_arch_ver): Add entry for ARMv8-R.
(aeabi_set_public_attributes): Update gas_assert for Tag_DIV_use
logic.
* testsuite/gas/arm/armv8-a+fp.s: Rename into ...
* testsuite/gas/arm/armv8-ar+fp.s: This. Remove .arch directive.
* testsuite/gas/arm/armv8-a+fp.d: Specify source to assemble and
architecture to assemble for.
* testsuite/gas/arm/armv8-r+fp.d: New.
* testsuite/gas/arm/armv8-a+simd.s: Rename into ...
* testsuite/gas/arm/armv8-ar+simd.s: This. Remove .arch directive.
* testsuite/gas/arm/armv8-a+simd.d: Specify source to assemble and
architecture to assemble for.
* testsuite/gas/arm/armv8-r+simd.d: New.
* testsuite/gas/arm/armv8-a-bad.s: Rename into ...
* testsuite/gas/arm/armv8-ar-bad.s: This. Remove .arch directive.
* testsuite/gas/arm/armv8-a-bad.l: Rename into ...
* testsuite/gas/arm/armv8-ar-bad.l: This. Decrement line number by 1.
* testsuite/gas/arm/armv8-a-bad.d: Specify source to assemble,
architecture to assemble for and adjust error output file.
* testsuite/gas/arm/armv8-r-bad.d: New.
* testsuite/gas/arm/armv8-a-barrier.s: Rename into ...
* testsuite/gas/arm/armv8-ar-barrier.s: This.
* testsuite/gas/arm/armv8-a-barrier-arm.d: Adjust source.
* testsuite/gas/arm/armv8-a-barrier-thumb.d: Likewise.
* testsuite/gas/arm/armv8-r-barrier-arm.d: New.
* testsuite/gas/arm/armv8-r-barrier-thumb.d: New.
* testsuite/gas/arm/armv8-a-it-bad.s: Rename into ...
* testsuite/gas/arm/armv8-ar-it-bad.s: This. Remove .arch directive.
* testsuite/gas/arm/armv8-a-it-bad.l: Rename into ...
* testsuite/gas/arm/armv8-ar-it-bad.l: This. Decrement line number
by 1.
* testsuite/gas/arm/armv8-a-it-bad.d: Specify source to assemble,
architecture to assemble for and adjust error output file.
* testsuite/gas/arm/armv8-r-it-bad.d: New.
* testsuite/gas/arm/armv8-a.s: Rename into ...
* testsuite/gas/arm/armv8-ar.s: This. Remove .arch directive.
* testsuite/gas/arm/armv8-a.d: Specify source to assemble and
architecture to assemble for.
* testsuite/gas/arm/armv8-r.d: New.
* testsuite/gas/arm/attr-march-armv8-r+crypto.d: New.
* testsuite/gas/arm/attr-march-armv8-r+fp.d: New.
* testsuite/gas/arm/attr-march-armv8-r+simd.d: New.
* testsuite/gas/arm/attr-march-armv8-r.d: New.
* testsuite/gas/arm/crc32.s: Rename into ...
* testsuite/gas/arm/crc32-armv8-ar.s: This.
* testsuite/gas/arm/crc32.d: Rename into ...
* testsuite/gas/arm/crc32-armv8-a.d: This. Specify source to assemble.
* testsuite/gas/arm/crc32-armv8-r.d: New.
* testsuite/gas/arm/crc32-bad.s: Rename into ...
* testsuite/gas/arm/crc32-armv8-ar-bad.s: This.
* testsuite/gas/arm/crc32-bad.d: Rename into ...
* testsuite/gas/arm/crc32-armv8-a-bad.d: This. Specify source to
assemble.
* testsuite/gas/arm/crc32-armv8-r-bad.d: New.
* testsuite/gas/arm/mask_1.s: Rename into ...
* testsuite/gas/arm/mask_1-armv8-ar.s: This.
* testsuite/gas/arm/mask_1.d: Rename into ...
* testsuite/gas/arm/mask_1-armv8-a.d: This. Specify source to
assemble.
* testsuite/gas/arm/mask_1-armv8-r.d: new.
include/
* elf/arm.h (TAG_CPU_ARCH_V8R): New macro.
* opcode/arm.h (ARM_EXT2_V8A): New macro.
(ARM_AEXT2_V8A): Rename into ...
(ARM_AEXT2_V8AR): This.
(ARM_AEXT2_V8A): New macro.
(ARM_AEXT_V8R): New macro.
(ARM_AEXT2_V8R): New macro.
(ARM_ARCH_V8R): New macro.
This patch adds a new S/390 specific segment type: PT_S390_PGSTE. For
binaries marked with that segment the kernel will allocate 4k page
tables. The only user so far will be qemu.
ld/ChangeLog:
2017-06-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* Makefile.in: Add s390.em as build dependency.
* emulparams/elf64_s390.sh (EXTRA_EM_FILE): Add s390.em.
* emultempl/s390.em: New file.
* gen-doc.texi: Add documentation for --s390-pgste option.
* ld.texinfo: Likewise.
include/ChangeLog:
2017-06-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* elf/s390.h (PT_S390_PGSTE): Define macro.
binutils/ChangeLog:
2017-06-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* readelf.c (get_s390_segment_type): Add support for the new
segment type PT_S390_PGSTE.
(get_segment_type): Call get_s390_segment_type.
elfcpp/ChangeLog:
2017-06-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* elfcpp.h (enum PT): Add PT_S390_PGSTE to enum.
bfd/ChangeLog:
2017-06-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* elf-s390.h: New file.
* elf64-s390.c (struct elf_s390_link_hash_table): Add params
field.
(elf_s390_additional_program_headers): New function.
(elf_s390_modify_segment_map): New function.
(bfd_elf_s390_set_options): New function.
(elf_backend_additional_program_headers)
(elf_backend_modify_segment_map): Add macro definitions.
To support IBT in Intel Control-flow Enforcement Technology (CET)
instructions:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf
#define GNU_PROPERTY_X86_FEATURE_1_AND 0xc0000002
#define GNU_PROPERTY_X86_FEATURE_1_IBT (1U << 0)
are added to GNU program properties to indicate that all executable
sections are compatible with IBT when ENDBR instruction starts each
valid target where an indirect branch instruction can land.
GNU_PROPERTY_X86_FEATURE_1_IBT is set on output only if it is set on
all relocatable inputs.
The followings changes are made to the Procedure Linkage Table (PLT):
1. For 64-bit x86-64, PLT is changed to
PLT0: push GOT[1]
bnd jmp *GOT[2]
nop
...
PLTn: endbr64
push namen_reloc_index
bnd jmp PLT0
together with the second PLT section:
PLTn: endbr64
bnd jmp *GOT[namen_index]
nop
BND prefix is also added so that IBT-enabled PLT is compatible with MPX.
2. For 32-bit x86-64 (x32) and i386, PLT is changed to
PLT0: push GOT[1]
jmp *GOT[2]
nop
...
PLTn: endbr64 # endbr32 for i386.
push namen_reloc_index
jmp PLT0
together with the second PLT section:
PLTn: endbr64 # endbr32 for i386.
jmp *GOT[namen_index]
nop
BND prefix isn't used since MPX isn't supported on x32 and BND registers
aren't used in parameter passing on i386.
GOT is an array of addresses. Initially, GOT[namen_index] is filled
with the address of the ENDBR instruction of the corresponding entry
in the first PLT section. The function, namen, is called via the
ENDBR instruction in the second PLT entry. GOT[namen_index] is updated
to the actual address of the function, namen, at run-time.
2 linker command line options are added:
1. -z ibtplt: Generate IBT-enabled PLT.
2. -z ibt: Generate GNU_PROPERTY_X86_FEATURE_1_IBT in GNU program
properties as well as IBT-enabled PLT.
bfd/
* elf32-i386.c (elf_i386_lazy_ibt_plt0_entry): New.
(elf_i386_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_lazy_ibt_plt0_entry): Likewise.
(elf_i386_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_eh_frame_lazy_ibt_plt): Likewise.
(elf_i386_lazy_plt_layout): Likewise.
(elf_i386_non_lazy_plt_layout): Likewise.
(elf_i386_link_hash_entry): Add plt_second.
(elf_i386_link_hash_table): Add plt_second and
plt_second_eh_frame.
(elf_i386_allocate_dynrelocs): Use the second PLT if needed.
(elf_i386_size_dynamic_sections): Use .plt.got unwind info for
the second PLT. Check the second PLT.
(elf_i386_relocate_section): Use the second PLT to resolve
PLT reference if needed.
(elf_i386_finish_dynamic_symbol): Fill and use the second PLT if
needed.
(elf_i386_finish_dynamic_sections): Set sh_entsize on the
second PLT. Generate unwind info for the second PLT.
(elf_i386_plt_type): Add plt_second.
(elf_i386_get_synthetic_symtab): Support the second PLT.
(elf_i386_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_i386_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_i386_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
* elf64-x86-64.c (elf_x86_64_lazy_ibt_plt_entry): New.
(elf_x32_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_non_lazy_ibt_plt_entry): Likewise.
(elf_x32_non_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_eh_frame_lazy_ibt_plt): Likewise.
(elf_x32_eh_frame_lazy_ibt_plt): Likewise.
(elf_x86_64_lazy_ibt_plt): Likewise.
(elf_x32_lazy_ibt_plt): Likewise.
(elf_x86_64_non_lazy_ibt_plt): Likewise.
(elf_x32_non_lazy_ibt_plt): Likewise.
(elf_x86_64_get_synthetic_symtab): Support the second PLT.
(elf_x86_64_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_x86_64_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_x86_64_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
binutils/
* readelf.c (decode_x86_feature): New.
(print_gnu_property_note): Call decode_x86_feature on
GNU_PROPERTY_X86_FEATURE_1_AND.
* testsuite/binutils-all/i386/empty.d: New file.
* testsuite/binutils-all/i386/empty.s: Likewise.
* testsuite/binutils-all/i386/ibt.d: Likewise.
* testsuite/binutils-all/i386/ibt.s: Likewise.
* testsuite/binutils-all/x86-64/empty-x32.d: Likewise.
* testsuite/binutils-all/x86-64/empty.d: Likewise.
* testsuite/binutils-all/x86-64/empty.s: Likewise.
* testsuite/binutils-all/x86-64/ibt-x32.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.s: Likewise.
include/
* bfdlink.h (bfd_link_info): Add ibtplt and ibt.
* elf/common.h (GNU_PROPERTY_X86_FEATURE_1_AND): New.
(GNU_PROPERTY_X86_FEATURE_1_IBT): Likewise.
ld/
* Makefile.am (ELF_X86_DEPS): Add $(srcdir)/emulparams/cet.sh.
* Makefile.in: Regenerated.
* NEWS: Mention GNU_PROPERTY_X86_FEATURE_1_IBT, -z ibtplt
and -z ibt.
* emulparams/cet.sh: New file.
* testsuite/ld-i386/ibt-plt-1.d: Likewise.
* testsuite/ld-i386/ibt-plt-1.s: Likewise.
* testsuite/ld-i386/ibt-plt-2.s: Likewise.
* testsuite/ld-i386/ibt-plt-2a.d: Likewise.
* testsuite/ld-i386/ibt-plt-2b.d: Likewise.
* testsuite/ld-i386/ibt-plt-2c.d: Likewise.
* testsuite/ld-i386/ibt-plt-2d.d: Likewise.
* testsuite/ld-i386/ibt-plt-3.s: Likewise.
* testsuite/ld-i386/ibt-plt-3a.d: Likewise.
* testsuite/ld-i386/ibt-plt-3b.d: Likewise.
* testsuite/ld-i386/ibt-plt-3c.d: Likewise.
* testsuite/ld-i386/ibt-plt-3d.d: Likewise.
* testsuite/ld-i386/plt-main-ibt.dd: Likewise.
* testsuite/ld-i386/plt-pie-ibt.dd: Likewise.
* testsuite/ld-i386/property-x86-empty.s: Likewise.
* testsuite/ld-i386/property-x86-ibt.s: Likewise.
* testsuite/ld-i386/property-x86-ibt1a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt1b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt2.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt4.d: Likewise.
* testsuite/ld-i386/property-x86-ibt5.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d.d: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-now.rd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-x32.dd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt.dd: Likewise.
* testsuite/ld-x86-64/property-x86-empty.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5.d: Likewise.
* emulparams/elf32_x86_64.sh: Source emulparams/cet.sh.
(TINY_READONLY_SECTION): Add .plt.sec.
* emulparams/elf_i386.sh: Likewise.
* emulparams/elf_x86_64.sh: Source emulparams/cet.sh.
* ld.texinfo: Document -z ibtplt and -z ibt.
* testsuite/ld-i386/i386.exp: Run IBT and IBT PLT tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-x86-64/pr21481b.S (check): Updated for x32.
ELFv2 functions with localentry:0 are those with a single entry point,
ie. global entry == local entry, and that have no requirement on r2 or
r12, and guarantee r2 is unchanged on return. Such an external
function can be called via the PLT without saving r2 or restoring it
on return, avoiding a common load-hit-store for small functions. The
optimization is attractive. The TOC pointer load-hit-store is a major
reason why calls to small functions that need no register saves, or
with shrink-wrap, no register saves on a fast path, are slow on
powerpc64le.
To be safe, this optimization needs ld.so support to check that the
run-time matches link-time function implementation. If a function
in a shared library with st_other localentry non-zero is called
without saving and restoring r2, r2 will be trashed on return, leading
to segfaults. For that reason the optimization does not happen for
weak functions since a weak definition is a fairly solid hint that the
function will likely be overridden. I'm also not enabling the
optimization by default unless glibc-2.26 is detected, which should
have the ld.so checks implemented.
bfd/
* elf64-ppc.c (struct ppc_link_hash_table): Add has_plt_localentry0.
(ppc64_elf_merge_symbol_attribute): Merge localentry bits from
dynamic objects.
(is_elfv2_localentry0): New function.
(ppc64_elf_tls_setup): Default params->plt_localentry0.
(plt_stub_size): Adjust size for tls_get_addr_opt stub.
(build_tls_get_addr_stub): Use a simpler stub when r2 is not saved.
(ppc64_elf_size_stubs): Leave stub_type as ppc_stub_plt_call for
optimized localentry:0 stubs.
(ppc64_elf_build_stubs): Save r2 in ELFv2 __glink_PLTresolve.
(ppc64_elf_relocate_section): Leave nop unchanged for optimized
localentry:0 stubs.
(ppc64_elf_finish_dynamic_sections): Set PPC64_OPT_LOCALENTRY in
DT_PPC64_OPT.
* elf64-ppc.h (struct ppc64_elf_params): Add plt_localentry0.
include/
* elf/ppc64.h (PPC64_OPT_LOCALENTRY): Define.
ld/
* emultempl/ppc64elf.em (params): Init plt_localentry0 field.
(enum ppc64_opt): New, replacing OPTION_* defines. Add
OPTION_PLT_LOCALENTRY, and OPTION_NO_PLT_LOCALENTRY.
(PARSE_AND_LIST_*): Support --plt-localentry and --no-plt-localentry.
* testsuite/ld-powerpc/elfv2so.d: Update.
* testsuite/ld-powerpc/powerpc.exp (TLS opt 5): Use --no-plt-localentry.
* testsuite/ld-powerpc/tlsopt5.d: Update.
This patch extracts ARC CPU definitions from gas/config/tc-arc.c (cpu_types)
into a separate file arc-cpu.def. This will allow reuse of CPU type definition
in multiple places where it might be needed, for example in disassembler. This
will help ensure that gas and disassembker use same option values for CPUs.
arc-cpu.def file relies on preprocessor macroses which are defined somewhere
else. This for example multiple C files to include arc-cpu.def, but define
different macroses, therefore creating different structures.
include/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* elf/arc-cpu.def: New file.
gas/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* config/tc-arc.c (cpu_types): Include arc-cpu.def
Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Add MIPS16e2 ASE support as per the architecture specification[1],
including in particular:
1. A new ELF ASE flag to mark MIPS16e2 binaries.
2. MIPS16e2 instruction assembly support, including a relaxation update
to use LUI rather than an LI/SLL instruction pair for loading the
high part of 32-bit addresses.
3. MIPS16e2 instruction disassembly support, including updated rules for
extended forms of instructions that are now subdecoded and therefore
do not alias to the original MIPS16 ISA revision instructions even
for encodings that are not valid in the MIPS16e2 instruction set.
Add `-mmips16e2' and `-mno-mips16e2' GAS command-line options and their
corresponding `mips16e2' and `no-mips16e2' settings for the `.set' and
`.module' pseudo-ops. Control the availability of the MT ASE subset of
the MIPS16e2 instruction set with a combination of these controls and
the preexisting MT ASE controls.
Parts of this change by Matthew Fortune and Andrew Bennett.
References:
[1] "MIPS32 Architecture for Programmers: MIPS16e2 Application-Specific
Extension Technical Reference Manual", Imagination Technologies
Ltd., Document Number: MD01172, Revision 01.00, April 26, 2016
include/
* elf/mips.h (AFL_ASE_MIPS16E2): New macro.
(AFL_ASE_MASK): Adjust accordingly.
* opcode/mips.h: Document new operand codes defined.
(mips_operand_type): Add OP_REG28 enum value.
(INSN2_SHORT_ONLY): Update description.
(ASE_MIPS16E2, ASE_MIPS16E2_MT): New macros.
bfd/
* elfxx-mips.c (print_mips_ases): Handle MIPS16e2 ASE.
opcodes/
* mips-dis.c (mips_arch_choices): Add ASE_MIPS16E2 and
ASE_MIPS16E2_MT flags to the unnamed MIPS16 entry.
(mips_convert_abiflags_ases): Handle the AFL_ASE_MIPS16E2 flag.
(print_insn_arg) <OP_REG28>: Add handler.
(validate_insn_args) <OP_REG28>: Handle.
(print_mips16_insn_arg): Handle MIPS16 instructions that require
32-bit encoding and 9-bit immediates.
(print_insn_mips16): Handle MIPS16 instructions that require
32-bit encoding and MFC0/MTC0 operand decoding.
* mips16-opc.c (decode_mips16_operand) <'>', '9', 'G', 'N', 'O'>
<'Q', 'T', 'b', 'c', 'd', 'r', 'u'>: Add handlers.
(RD_C0, WR_C0, E2, E2MT): New macros.
(mips16_opcodes): Add entries for MIPS16e2 instructions:
GP-relative "addiu" and its "addu" spelling, "andi", "cache",
"di", "ehb", "ei", "ext", "ins", GP-relative "lb", "lbu", "lh",
"lhu", and "lw" instructions, "ll", "lui", "lwl", "lwr", "mfc0",
"movn", "movtn", "movtz", "movz", "mtc0", "ori", "pause",
"pref", "rdhwr", "sc", GP-relative "sb", "sh" and "sw"
instructions, "swl", "swr", "sync" and its "sync_acquire",
"sync_mb", "sync_release", "sync_rmb" and "sync_wmb" aliases,
"xori", "dmt", "dvpe", "emt" and "evpe". Add split
regular/extended entries for original MIPS16 ISA revision
instructions whose extended forms are subdecoded in the MIPS16e2
ISA revision: "li", "sll" and "srl".
binutils/
* readelf.c (print_mips_ases): Handle MIPS16e2 ASE.
* NEWS: Mention MIPS16e2 ASE support.
gas/
* config/tc-mips.c (RELAX_MIPS16_ENCODE): Add `e2' flag.
(RELAX_MIPS16_E2): New macro.
(RELAX_MIPS16_PIC, RELAX_MIPS16_SYM32, RELAX_MIPS16_NOMACRO)
(RELAX_MIPS16_USER_SMALL, RELAX_MIPS16_USER_EXT)
(RELAX_MIPS16_DSLOT, RELAX_MIPS16_JAL_DSLOT)
(RELAX_MIPS16_EXTENDED, RELAX_MIPS16_MARK_EXTENDED)
(RELAX_MIPS16_CLEAR_EXTENDED, RELAX_MIPS16_ALWAYS_EXTENDED)
(RELAX_MIPS16_MARK_ALWAYS_EXTENDED)
(RELAX_MIPS16_CLEAR_ALWAYS_EXTENDED, RELAX_MIPS16_MACRO)
(RELAX_MIPS16_MARK_MACRO, RELAX_MIPS16_CLEAR_MACRO): Shift bits.
(mips16_immed_extend): New prototype.
(options): Add OPTION_MIPS16E2 and OPTION_NO_MIPS16E2 enum
values.
(md_longopts): Add "mmips16e2" and "mno-mips16e2" options.
(mips_ases): Add "mips16e2" entry.
(mips_set_ase): Handle MIPS16e2 ASE.
(insn_insert_operand): Explicitly handle immediates with MIPS16
instructions that require 32-bit encoding.
(is_opcode_valid_16): Pass enabled ASE bitmask on to
`opcode_is_member'.
(validate_mips_insn): Explicitly handle immediates with MIPS16
instructions that require 32-bit encoding.
(operand_reg_mask) <OP_REG28>: Add handler.
(match_reg28_operand): New function.
(match_operand) <OP_REG28>: Add handler.
(append_insn): Pass ASE_MIPS16E2 setting to RELAX_MIPS16_ENCODE.
(match_mips16_insn): Handle MIPS16 instructions that require
32-bit encoding and `V' and `u' operand codes.
(mips16_ip): Allow any characters except from `.' in opcodes.
(mips16_immed_extend): Handle 9-bit immediates. Do not shuffle
immediates whose width is not one of these listed.
(md_estimate_size_before_relax): Handle MIPS16e2 relaxation.
(mips_relax_frag): Likewise.
(md_convert_frag): Likewise.
(mips_convert_ase_flags): Handle MIPS16e2 ASE.
* doc/as.texinfo (Target MIPS options): Add `-mmips16e2' and
`-mno-mips16e2' options.
(-mmips16e2, -mno-mips16e2): New options.
* doc/c-mips.texi (MIPS Options): Add `-mmips16e2' and
`-mno-mips16e2' options.
(MIPS ASE Instruction Generation Overrides): Add `.set mips16e2'
and `.set nomips16e2'.
Mark an ALLOC section, which should be placed in special memory area,
with SHF_GNU_MBIND. Its sh_info field indicates the special memory
type. GNU_MBIND section names start with ".mbind" so that they are
placed as orphan sections by linker. All input GNU_MBIND sections
with the same sh_type, sh_flags and sh_info are placed in one output
GNU_MBIND section. In executable and shared object, create a
GNU_MBIND segment for each GNU_MBIND section and its segment type is
PT_GNU_MBIND_LO plus the sh_info value. Each GNU_MBIND segment is
aligned at page boundary.
The assembler syntax:
.section .mbind.foo,"adx",%progbits
^ 0: Special memory type.
|
'd' for SHF_GNU_MBIND.
.section .mbind.foo,"adx",%progbits,0x1
^ 1: Special memory type.
|
'd' for SHF_GNU_MBIND.
.section .mbind.bar,"adG",%progbits,.foo_group,comdat,0x2
^ 2: Special memory type.
|
'd' for SHF_GNU_MBIND.
bfd/
* elf.c (get_program_header_size): Add a GNU_MBIND segment for
each GNU_MBIND section and align GNU_MBIND section to page size.
(_bfd_elf_map_sections_to_segments): Create a GNU_MBIND
segment for each GNU_MBIND section.
(_bfd_elf_init_private_section_data): Copy sh_info from input
for GNU_MBIND section.
binutils/
* NEWS: Mention support for ELF SHF_GNU_MBIND and
PT_GNU_MBIND_XXX.
* readelf.c (get_segment_type): Handle PT_GNU_MBIND_XXX.
(get_elf_section_flags): Handle SHF_GNU_MBIND.
(process_section_headers): Likewise.
* testsuite/binutils-all/mbind1.s: New file.
* testsuite/binutils-all/objcopy.exp: Run readelf test on
mbind1.s.
gas/
* NEWS: Mention support for ELF SHF_GNU_MBIND.
* config/obj-elf.c (section_match): New.
(get_section): Match both sh_info and group name.
(obj_elf_change_section): Add argument for sh_info. Pass both
sh_info and group name to get_section. Issue an error for
SHF_GNU_MBIND section without SHF_ALLOC. Set sh_info.
(obj_elf_parse_section_letters): Set SHF_GNU_MBIND for 'd'.
(obj_elf_section): Support SHF_GNU_MBIND section info.
* config/obj-elf.h (obj_elf_change_section): Add argument for
sh_info.
* config/tc-arm.c (start_unwind_section): Pass 0 as sh_info to
obj_elf_change_section.
* config/tc-ia64.c (obj_elf_vms_common): Likewise.
* config/tc-microblaze.c (microblaze_s_data): Likewise.
(microblaze_s_sdata): Likewise.
(microblaze_s_rdata): Likewise.
(microblaze_s_bss): Likewise.
* config/tc-mips.c (s_change_section): Likewise.
* config/tc-msp430.c (msp430_profiler): Likewise.
* config/tc-rx.c (parse_rx_section): Likewise.
* config/tc-tic6x.c (tic6x_start_unwind_section): Likewise.
* doc/as.texinfo: Document 'd' for SHF_GNU_MBIND.
* testsuite/gas/elf/elf.exp: Run section12a, section12b and
section13.
* testsuite/gas/elf/section10.d: Updated.
* testsuite/gas/elf/section10.s: Likewise.
* testsuite/gas/elf/section12.s: New file.
* testsuite/gas/elf/section12a.d: Likewise.
* testsuite/gas/elf/section12b.d: Likewise.
* testsuite/gas/elf/section13.l: Likewise.
* testsuite/gas/elf/section13.d: Likewise.
* testsuite/gas/elf/section13.s: Likewise.
include/
* elf/common.h (PT_GNU_MBIND_NUM): New.
(PT_GNU_MBIND_LO): Likewise.
(PT_GNU_MBIND_HI): Likewise.
(SHF_GNU_MBIND): Likewise.
ld/
* NEWS: Mention support for ELF SHF_GNU_MBIND and
PT_GNU_MBIND_XXX.
* emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Place
input GNU_MBIND sections with the same type, attributes and
sh_info field into a single output GNU_MBIND section.
* testsuite/ld-elf/elf.exp: Run mbind2a and mbind2b.
* testsuite/ld-elf/mbind1.s: New file.
* testsuite/ld-elf/mbind1a.d: Likewise.
* testsuite/ld-elf/mbind1b.d: Likewise.
* testsuite/ld-elf/mbind1c.d: Likewise.
* testsuite/ld-elf/mbind2a.s: Likewise.
* testsuite/ld-elf/mbind2b.c: Likewise.
We missed a "_gp" when changing the GP symbol. To make sure that
doesn't happen again, we now use the same definition everywhere (thanks,
Nick).
include/ChangeLog:
2017-04-03 Palmer Dabbelt <palmer@dabbelt.com>
* elf/riscv.h (RISCV_GP_SYMBOL): New define.
bfd/ChangeLog:
2017-04-03 Palmer Dabbelt <palmer@dabbelt.com>
* elfnn-riscv.c (GP_NAME): Delete.
(riscv_global_pointer_value): Change GP_NAME to RISCV_GP_SYMBOL.
(_bfd_riscv_relax_lui): Likewise.
opcodes/ChangeLog:
2017-04-03 Palmer Dabbelt <palmer@dabbelt.com>
* riscv-dis.c (riscv_disassemble_insn): Change "_gp" to
RISCV_GP_SYMBOL.
include * elf/wasm32.h: New file to support wasm32 architecture.
bfd * cpu-wasm32.c: New file to support wasm32 architecture.
* elf32-wasm32.c: New file to support wasm32 architecture.
* Makefile.am: Add wasm32 architecture.
* archures.c: Likewise.
* config.bfd: Likewise.
* configure.ac: Likewise.
* targets.c: Likewise.
include * elf/common.h (GNU_BUILD_ATTRIBUTE_SHORT_ENUM): New GNU BUILD
note type.
binutils * readelf.c (print_gnu_build_attribute_name): Add support for
GNU_BUILD_ATTRIBUTE_SHORT_ENUM.
Property type and datasz are always 4 bytes for both 32-bit and 64-bit
objects. Property values for GNU_PROPERTY_X86_ISA_1_USED and
GNU_PROPERTY_X86_ISA_1_NEEDED are 4 bytes for both i386 and x86-64
objects. We should also check GNU_PROPERTY_LOPROC and
GNU_PROPERTY_LOUSER.
binutils/
PR binutils/21231
* readelf.c (decode_x86_isa): Change argument to unsigned int.
(print_gnu_property_note): Retrieve property type and datasz as
4-byte integer. Consolidate property datasz check. Check
GNU_PROPERTY_LOPROC and GNU_PROPERTY_LOUSER.
* testsuite/binutils-all/i386/pr21231a.d: New file.
* testsuite/binutils-all/i386/pr21231a.s: Likewise.
* testsuite/binutils-all/i386/pr21231b.d: Likewise.
* testsuite/binutils-all/i386/pr21231b.s: Likewise.
* testsuite/binutils-all/x86-64/pr21231a.d: Likewise.
* testsuite/binutils-all/x86-64/pr21231a.s: Likewise.
* testsuite/binutils-all/x86-64/pr21231b.d: Likewise.
* testsuite/binutils-all/x86-64/pr21231b.s: Likewise.
include/
PR binutils/21231
* elf/common.h (GNU_PROPERTY_LOPROC): New.
(GNU_PROPERTY_HIPROC): Likewise.
(GNU_PROPERTY_LOUSER): Likewise.
(GNU_PROPERTY_HIUSER): Likewise.
This came up because I was looking at ld/tmpdir/addpcis.o and noticed
the odd addends on REL16DX_HA. They ought to both be -4. The error
crept in due REL16DX_HA howto being pc-relative (as indeed it should
be), and code at gas/write.c:1001 after this comment
/* Make it pc-relative. If the back-end code has not
selected a pc-relative reloc, cancel the adjustment
we do later on all pc-relative relocs. */
*not* cancelling the pc-relative adjustment. So I've made a dummy
non-relative split reloc so that the generic code handles this, rather
than attempting to add hacks later in md_apply_fix which would not be
very robust. Having the new internal reloc also makes it easy to
support
addpcis rx,sym@ha
as an equivalent to
addpcis rx,(sym-0f)@ha
0:
The patch also fixes overflow checking, which must test whether the
addi will overflow too since @l relocs don't have any overflow check.
Lastly, since I was poking at md_apply_fix, I arranged to have the
generic gas/write.c code emit errors for subtraction expressions where
we lack reloc support.
include/
* elf/ppc64.h (R_PPC64_16DX_HA): New. Expand fake reloc comment.
* elf/ppc.h (R_PPC_16DX_HA): Likewise.
bfd/
* reloc.c (BFD_RELOC_PPC_16DX_HA): New.
* elf64-ppc.c (ppc64_elf_howto_raw <R_PPC64_16DX_HA>): New howto.
(ppc64_elf_reloc_type_lookup): Translate new bfd reloc.
(ppc64_elf_ha_reloc): Correct overflow test on REL16DX_HA.
(ppc64_elf_relocate_section): Likewise.
* elf32-ppc.c (ppc_elf_howto_raw <R_PPC_16DX_HA>): New howto.
(ppc_elf_reloc_type_lookup): Translate new bfd reloc.
(ppc_elf_check_relocs): Handle R_PPC_16DX_HA to pacify gcc.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
gas/
* config/tc-ppc.c (md_assemble): Use BFD_RELOC_PPC_16DX_HA for addpcis.
(md_apply_fix): Remove fx_subsy check. Move code converting to
pcrel reloc earlier and handle BFD_RELOC_PPC_16DX_HA. Remove code
emiiting errors on seeing fx_pcrel set on unexpected relocs, as
that is done now by the generic code via..
* config/tc-ppc.h (TC_FORCE_RELOCATION_SUB_LOCAL): ..this. Define.
(TC_VALIDATE_FIX_SUB): Define.
ld/
* testsuite/ld-powerpc/addpcis.d: Define ext1 and ext2 at
limits of addpcis range.
We've decided to standardize on two flags for RISC-V: "-march" sets the
target architecture (which determines which instructions can be
generated), and "-mabi" sets the target ABI. We needed to rework this
because the old flag set didn't support soft-float or single-float ABIs,
and didn't support an x32-style ABI on RISC-V.
Additionally, we've changed the behavior of the -march flag: it's now a
lot stricter and only parses things we can actually understand.
Additionally, it's now lowercase-only: the rationale is that while the
RISC-V ISA manual specifies that ISA strings are case-insensitive, in
Linux-land things are usually case-sensitive. Since this flag can be
used to determine library paths, we didn't want to bake some
case-insensitivity in there that would case trouble later.
This patch implements these two new flags and removes the old flags that
could conflict with these. There wasn't a RISC-V release before, so we
want to just support a clean flag set.
include/
* elf/riscv.h (EF_RISCV_SOFT_FLOAT): Don't define.
(EF_RISCV_FLOAT_ABI, EF_RISCV_FLOAT_ABI_SOFT): Define.
(EF_RISCV_FLOAT_ABI_SINGLE, EF_RISCV_FLOAT_ABI_DOUBLE): Define.
(EF_RISCV_FLOAT_ABI_QUAD): Define.
bfd/
* elfnn-riscv.c (_bfd_riscv_elf_merge_private_bfd_data): Use
EF_RISCV_FLOAT_ABI_SOFT instead of EF_RISCV_SOFT_FLOAT.
binutils/
* readelf.c (get_machine_flags): Use
EF_RISCV_FLOAT_ABI_{SOFT,SINGLE,DOBULE,QUAD) instead of
EF_RISCV_{SOFT,HARD}_FLOAT.
gas/
* config/tc-riscv.h (xlen): Delete.
* config/tc-riscv.c (xlen): Make static.
(abi_xlen): New variable.
(options): Replace OPTION_{M32,M64,MSOFT_FLOAT,MHARD_FLOAT,MRVC}
with OPTION_MABI.
(md_longopts): Likewise.
(md_parse_option): Likewise.
(riscv_elf_final_processing): Likewise.
* doc/as.texinfo (Target RISC-V options): Likewise.
* doc/c-riscv.texi (OPTIONS): Likewise.
* config/tc-riscv.c (float_mode): Removed.
(float_abi): New type, specifies the floating-point ABI.
(riscv_set_abi): New function.
(riscv_add_subset): Only allow lower-case ISA names and require
them to start with "rv".
(riscv_after_parse_args): Likewise.
opcodes/
* riscv-dis.c (riscv_disassemble_insn): Default to the ELF's
XLEN when none is provided.
Before this commit we didn't cleanly support CFI directives because the
internal offsets used to get relaxed which broke them. This patch
significantly reworks how we handle linker relaxations:
* DWARF is now properly supported
* There is a ".option norelax" to disable relaxations, for when users
write assembly that can't be relaxed (if it's to be later patched up,
for example).
* There is an additional _RELAX relocation that specifies when previous
relocations can be relaxed.
We're in the process of documenting the RISC-V ELF ABI, which will
include documentation of our relocations
https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf.md
but we expect that this relocation set will remain ABI compatible in the
future (ie, it's safe to release).
Thanks to Kuan-Lin Chen for figuring out how to correctly relax the
debug info!
include/
* elf/riscv.h: Add R_RISCV_TPREL_I through R_RISCV_SET32.
bfd/
* reloc.c (BFD_RELOC_RISCV_TPREL_I): New relocation.
(BFD_RELOC_RISCV_TPREL_S): Likewise.
(BFD_RELOC_RISCV_RELAX): Likewise.
(BFD_RELOC_RISCV_CFA): Likewise.
(BFD_RELOC_RISCV_SUB6): Likewise.
(BFD_RELOC_RISCV_SET8): Likewise.
(BFD_RELOC_RISCV_SET8): Likewise.
(BFD_RELOC_RISCV_SET16): Likewise.
(BFD_RELOC_RISCV_SET32): Likewise.
* elfnn-riscv.c (perform_relocation): Handle the new
relocations.
(_bfd_riscv_relax_tls_le): Likewise.
(_bfd_riscv_relax_align): Likewise.
(_bfd_riscv_relax_section): Likewise.
(howto_table): Likewise.
(riscv_reloc_map): Likewise.
(relax_func_t): New type.
(_bfd_riscv_relax_call): Add reserve_size argument, which
controls the maximal offset pessimism. Correct type of max_alignment.
(_bfd_riscv_relax_lui): Likewise.
(_bfd_riscv_relax_tls_le): Likewise.
(_bfd_riscv_relax_align): Likewise.
(_bfd_riscv_relax_section): Compute the required reserve size
when relocating and use it to when calling relax_func.
* bfd-in2.h: Regenerate.
* libbfd.h: Likewise.
gas/
* config/tc-riscv.c (riscv_set_options): Add relax.
(riscv_opts): Likewise.
(s_riscv_option): Add relax and norelax.
(riscv_apply_const_reloc): New function.
(append_insn): Move constant relocation handling to
riscv_apply_const_reloc.
(md_pcrel_from): Likewise.
(parse_relocation): Skip BFD_RELOC_UNUSED.
(md_pcrel_from): Handle BFD_RELOC_RISCV_SUB6,
BFD_RELOC_RISCV_RELAX, BFD_RELOC_RISCV_CFA.
(md_apply_fix): Likewise.
(riscv_pre_output_hook): New function.
* config/tc-riscv.h (md_pre_output_hook): Define.
(riscv_pre_output_hook): Declare.
(DWARF_CIE_DATA_ALIGNMENT): Always -4.
Respect any ASE flags recorded in ELF file structures for the purpose of
selecting instructions to be disassembled, preventing code from being
hex-dumped even though having been clearly indicated as valid at the
assembly time. Use date from the MIPS ABI flags structure if present,
and otherwise there may be an MDMX ASE flag set in the ELF file header.
For backwards compatibility only set extra flags and do not clear any,
preserving all previously set by the architecture selected to be
disassembled for.
include/
* elf/mips.h (Elf_Internal_ABIFlags_v0): Also declare struct
typedef as `elf_internal_abiflags_v0'.
bfd/
* bfd-in.h (elf_internal_abiflags_v0): New struct declaration.
(bfd_mips_elf_get_abiflags): New prototype.
* elfxx-mips.c (bfd_mips_elf_get_abiflags): New function.
* bfd-in2.h: Regenerate.
opcodes/
* mips-dis.c (mips_convert_abiflags_ases): New function.
(set_default_mips_dis_options): Also infer ASE flags from ELF
file structures.
binutils/
* testsuite/binutils-all/mips/mips-ase-1.d: New test.
* testsuite/binutils-all/mips/mips-ase-2.d: New test.
* testsuite/binutils-all/mips/mips-ase-3.d: New test.
* testsuite/binutils-all/mips/mips-ase-1.s: New test source.
* testsuite/binutils-all/mips/mips-ase-2.s: New test source.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
This patch extends Tag_GNU_Power_ABI_FP to cover long double ABIs,
makes the assembler warn about undefined tag values, and removes
similar warnings from the linker. I think it is better to not
warn in the linker about undefined tag values as future extensions to
the tags then won't result in likely bogus warnings. This is
consistent with the fact that an older linker won't warn on an
entirely new tag.
include/
* elf/ppc.h (Tag_GNU_Power_ABI_FP): Comment.
bfd/
* elf-bfd.h (_bfd_elf_ppc_merge_fp_attributes): Declare.
* elf32-ppc.c (_bfd_elf_ppc_merge_fp_attributes): New function.
(ppc_elf_merge_obj_attributes): Use it. Don't copy first file
attributes, merge them. Don't warn about undefined tag bits,
or copy unknown values to output.
* elf64-ppc.c (ppc64_elf_merge_private_bfd_data): Call
_bfd_elf_ppc_merge_fp_attributes.
binutils/
* readelf.c (display_power_gnu_attribute): Catch truncated section
for all powerpc attributes. Display long double ABI. Don't
capitalize words, except for names. Show known bits of tag values
when some unknown bits are present. Whitespace fixes.
gas/
* config/tc-ppc.c (ppc_elf_gnu_attribute): New function.
(md_pseudo_table <ELF>): Handle "gnu_attribute".
ld/
* testsuite/ld-powerpc/attr-gnu-4-4.s: Delete.
* testsuite/ld-powerpc/attr-gnu-4-14.d: Delete.
* testsuite/ld-powerpc/attr-gnu-4-24.d: Delete.
* testsuite/ld-powerpc/attr-gnu-4-34.d: Delete.
* testsuite/ld-powerpc/attr-gnu-4-41.d: Delete.
* testsuite/ld-powerpc/attr-gnu-4-32.d: Adjust expected warning.
* testsuite/ld-powerpc/attr-gnu-8-23.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-01.d: Adjust expected output.
* testsuite/ld-powerpc/attr-gnu-4-02.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-03.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-10.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-11.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-20.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-22.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-33.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-8-11.d: Likewise.
* testsuite/ld-powerpc/powerpc.exp: Don't run deleted tests.
Added support for ARC_SDA_12 reloc.
Fixed ARC_N32_ME.
Added ME (middle-endian) to ARC_SDA_12 reloc.
bfd/ChangeLog:
Cupertino Miranda <cmiranda@synopsys.com>
* reloc.c: Fixed type in ARC_SECTOFF relocations. Added ARC_SDA_12
relocation.
* bfd-in2.h: Regenerated from the previous changes.
* libbfd.h: Regenerated from the previous changes.
include/ChangeLog:
Cupertino Miranda <cmiranda@synopsys.com>
* elf/arc-reloc.def: Fixed relocation formula for N*, SDA, SDA_12,
SDA_16_LD*, S13_PCREL, N32_ME, SECTOFF_* relocations.
* opcode/arc-func.h (replace_disp12s): Added. Used for SDA_12 relocation.
bfd/
* elf32-arm.c (CMSE_PREFIX): Define macro.
(elf32_arm_stub_cmse_branch_thumb_only): Define stub sequence.
(cmse_branch_thumb_only): Declare stub.
(struct elf32_arm_link_hash_table): Define cmse_stub_sec field.
(elf32_arm_get_plt_info): Add globals parameter. Use it to return
FALSE if there is no PLT.
(arm_type_of_stub): Adapt to new elf32_arm_get_plt_info signature.
(elf32_arm_final_link_relocate): Likewise.
(elf32_arm_gc_sweep_hook): Likewise.
(elf32_arm_gc_mark_extra_sections): Mark sections holding ARMv8-M
secure entry functions.
(arm_stub_is_thumb): Add case for arm_stub_cmse_branch_thumb_only.
(arm_dedicated_stub_output_section_required): Change to a switch case
and add a case for arm_stub_cmse_branch_thumb_only.
(arm_dedicated_stub_output_section_required_alignment): Likewise.
(arm_stub_dedicated_output_section_name): Likewise.
(arm_stub_dedicated_input_section_ptr): Likewise and remove
ATTRIBUTE_UNUSED for htab parameter.
(arm_stub_required_alignment): Likewise.
(arm_stub_sym_claimed): Likewise.
(arm_dedicated_stub_section_padding): Likewise.
(cmse_scan): New function.
(elf32_arm_size_stubs): Call cmse_scan for ARM M profile targets.
Set stub_changed to TRUE if such veneers were created.
(elf32_arm_swap_symbol_in): Add detection code for CMSE special
symbols.
include/
* arm.h (ARM_GET_SYM_CMSE_SPCL): Define macro.
(ARM_SET_SYM_CMSE_SPCL): Likewise.
ld/
* ld.texinfo (Placement of SG veneers): New concept entry.
* testsuite/ld-arm/arm-elf.exp
(Secure gateway veneers: no .gnu.sgstubs section): New test.
(Secure gateway veneers: wrong entry functions): Likewise.
(Secure gateway veneers (ARMv8-M Baseline)): Likewise.
(Secure gateway veneers (ARMv8-M Mainline)): Likewise.
* testsuite/ld-arm/cmse-veneers.s: New file.
* testsuite/ld-arm/cmse-veneers.d: Likewise.
* testsuite/ld-arm/cmse-veneers.rd: Likewise.
* testsuite/ld-arm/cmse-veneers.sd: Likewise.
* testsuite/ld-arm/cmse-veneers-no-gnu_sgstubs.out: Likewise.
* testsuite/ld-arm/cmse-veneers-wrong-entryfct.out: Likewise.
The R_ARC_SDA32 is wrongly described as a ME relocation, fix it. Offset the
__SDATA_BEGIN__ to take advantage of the signed 9-bit field of the
load/store instructions.
include/
2016-07-08 Claudiu Zissulescu <claziss@synopsys.com>
* elf/arc-reloc.def (ARC_SDA32): Don't use ME transformation.
ld/
2016-07-08 Claudiu Zissulescu <claziss@synopsys.com>
* emulparams/arcelf.sh (SDATA_START_SYMBOLS): Add offset.
* testsuite/ld-arc/sda-relocs.dd: New file.
* testsuite/ld-arc/sda-relocs.ld: Likewise.
* testsuite/ld-arc/sda-relocs.rd: Likewise.
* testsuite/ld-arc/sda-relocs.s: Likewise.
* testsuite/ld-arc/arc.exp: Add SDA tests.
TLS relocations did not support multiple TLS modes for the same
symbol in a single object file.
Refactored how GOT and TLS is implemented. Removed code duplications between
local and global symbols conditioning.
bfd/ChangeLog:
2016-06-14 Cupertino Miranda <cmiranda@synopsys.com>
* arc-got.h: Moved got related structures from elf32-arc.c to
this file. More precisely, tls_type_e, tls_got_entries, got_entry.
* (arc_get_local_got_ents,
got_entry_for_type,
new_got_entry_to_list,
tls_type_for_reloc,
symbol_has_entry_of_type,
get_got_entry_list_for_symbol,
arc_got_entry_type_for_reloc,
ADD_SYMBOL_REF_SEC_AND_RELOC,
arc_fill_got_info_for_reloc,
relocate_fix_got_relocs_for_got_info,
create_got_dynrelocs_for_single_entry,
create_got_dynrelocs_for_got_info): Added to file.
* elf32-arc.c: Removed GOT & TLS related structs and functions to
arc-got.h.
Signed-off-by: Claudiu Zissulescu <claziss@synopsys.com>
VLE is an encoding, not a particular processor architecture, so it
isn't really proper to select insns based on PPC_OPCODE_VLE. For
example
{"evaddw", VX (4, 512), VX_MASK, PPCSPE|PPCVLE, PPCNONE, {RS, RA, RB}},
{"vaddubs", VX (4, 512), VX_MASK, PPCVEC|PPCVLE, PPCNONE, {VD, VA, VB}},
shows two insns that have the same encoding, both available with VLE.
Enabling both with VLE means we can't disassemble the second variant
even if -Maltivec is given rather than -Mspe. Also, we don't check
user assembly against the processor type as well as we could.
Another problem is that when using the VLE encoding, insns from the
main ppc opcode table are not available, except those using opcode 4
and 31. Correcting this revealed two errors in the ld testsuite,
use of "nop" and "rfmci" when -mvle.
This patch fixes those problems in the opcode table, and removes
PPCNONE. I find a plain 0 distracts less from other values.
In addition, I've implemented code to recognize some machine values
from the apuinfo note present in ppc32 objects. It's not a complete
disambiguation since we're lacking info to detect newer chips, but
what we have should help with disassembly.
include/
* elf/ppc.h (APUINFO_SECTION_NAME, APUINFO_LABEL, PPC_APUINFO_ISEL,
PPC_APUINFO_PMR, PPC_APUINFO_RFMCI, PPC_APUINFO_CACHELCK,
PPC_APUINFO_SPE, PPC_APUINFO_EFS, PPC_APUINFO_BRLOCK,
PPC_APUINFO_VLE: Define.
opcodes/
* ppc-dis.c (ppc_opts): Delete extraneous parentheses. Default
cpu for "vle" to e500.
* ppc-opc.c (ALLOW8_SPRG): Remove PPC_OPCODE_VLE.
(NO371, PPCSPE, PPCISEL, PPCEFS, MULHW, DCBT_EO): Likewise.
(PPCNONE): Delete, substitute throughout.
(powerpc_opcodes): Remove PPCVLE from "flags". Add to "deprecated"
except for major opcode 4 and 31.
(vle_opcodes <se_rfmci>): Add PPCRFMCI to flags.
bfd/
* cpu-powerpc.c (powerpc_compatible): Allow bfd_mach_ppc_vle entry
to match other 32-bit archs.
* elf32-ppc.c (_bfd_elf_ppc_set_arch): New function.
(ppc_elf_object_p): Call it.
(ppc_elf_special_sections): Use APUINFO_SECTION_NAME. Fix
overlong line.
(APUINFO_SECTION_NAME, APUINFO_LABEL): Don't define here.
* elf64-ppc.c (ppc64_elf_object_p): Call _bfd_elf_ppc_set_arch.
* bfd-in.h (_bfd_elf_ppc_at_tls_transform,
_bfd_elf_ppc_at_tprel_transform): Move to..
* elf-bfd.h: ..here.
(_bfd_elf_ppc_set_arch): Declare.
* bfd-in2.h: Regenerate.
gas/
* config/tc-ppc.c (PPC_APUINFO_ISEL, PPC_APUINFO_PMR,
PPC_APUINFO_RFMCI, PPC_APUINFO_CACHELCK, PPC_APUINFO_SPE,
PPC_APUINFO_EFS, PPC_APUINFO_BRLOCK, PPC_APUINFO_VLE): Don't define.
(ppc_setup_opcodes): Check vle disables powerpc_opcodes overridden
by vle_opcodes, and that vle flag doesn't enable opcodes. Don't
add vle_opcodes twice.
(ppc_cleanup): Use APUINFO_SECTION_NAME and APUINFO_LABEL.
ld/
* testsuite/ld-powerpc/apuinfo1.s: Delete nop.
* testsuite/ld-powerpc/apuinfo-vle2.s: New.
* testsuite/ld-powerpc/powerpc.exp: Use apuinfo-vle2.s.
2016-05-10 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
* elf32-arm.c (elf32_arm_size_stubs): Use new macros
ARM_GET_SYM_BRANCH_TYPE and ARM_SET_SYM_BRANCH_TYPE to respectively get
and set branch type of a symbol.
(bfd_elf32_arm_process_before_allocation): Likewise.
(elf32_arm_relocate_section): Likewise and fix identation along the
way.
(allocate_dynrelocs_for_symbol): Likewise.
(elf32_arm_finish_dynamic_symbol): Likewise.
(elf32_arm_swap_symbol_in): Likewise.
(elf32_arm_swap_symbol_out): Likewise.
gas/
* config/tc-arm.c (arm_adjust_symtab): Use ARM_SET_SYM_BRANCH_TYPE to
set branch type of a symbol.
gdb/
* arm-tdep.c (arm_elf_make_msymbol_special): Use
ARM_GET_SYM_BRANCH_TYPE to get branch type of a symbol.
include/
* arm.h (enum arm_st_branch_type): Add new ST_BRANCH_ENUM_SIZE
enumerator.
(NUM_ENUM_ARM_ST_BRANCH_TYPE_BITS): New macro.
(ENUM_ARM_ST_BRANCH_TYPE_BITMASK): Likewise.
(ARM_SYM_BRANCH_TYPE): Replace by ...
(ARM_GET_SYM_BRANCH_TYPE): This and ...
(ARM_SET_SYM_BRANCH_TYPE): This in two versions depending on whether
BFD_ASSERT is defined or not.
ld/
* emultempl/armelf.em (gld${EMULATION_NAME}_finish): Use
ARM_GET_SYM_BRANCH_TYPE to get branch type of a symbol.
opcodes/
* arm-dis.c (get_sym_code_type): Use ARM_GET_SYM_BRANCH_TYPE to get
branch type of a symbol.
(print_insn): Likewise.
The ME modifier was missing from the relocation formula for the
ARC_NPS_CMEM16 relocation, and as such the relocation would not patch
correctly on little endian targets.
include/ChangeLog:
* elf/arc-reloc.def (ARC_NPS_CMEM16): Add ME modifier to formula.
Add support for arc/nps400 cmem instructions, these load and store
instructions are hard-wired to access "0x57f00000 + 16-bit-offset".
Supporting this relocation required some additions to the arc relocation
handling in the bfd library, as well as the standard changes required to
add a new relocation type.
There's a test of the new instructions in the assembler, and a test of
the relocation in the linker.
bfd/ChangeLog:
* reloc.c: Add BFD_RELOC_ARC_NPS_CMEM16 entry.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elf32-arc.c: Add 'opcode/arc.h' include.
(struct arc_relocation_data): Add symbol_name.
(arc_special_overflow_checks): New function.
(arc_do_relocation): Use arc_special_overflow_checks, reindent as
required, add an extra comment.
(elf_arc_relocate_section): Setup symbol_name in reloc_data.
gas/ChangeLog:
* testsuite/gas/arc/nps400-3.d: New file.
* testsuite/gas/arc/nps400-3.s: New file.
include/ChangeLog:
* elf/arc-reloc.def: Add ARC_NPS_CMEM16 reloc.
* opcode/arc.h (NPS_CMEM_HIGH_VALUE): Define.
ld/ChangeLog:
* testsuite/ld-arc/arc.exp: New file.
* testsuite/ld-arc/nps-1.s: New file.
* testsuite/ld-arc/nps-1a.d: New file.
* testsuite/ld-arc/nps-1b.d: New file.
* testsuite/ld-arc/nps-1b.err: New file.
opcodes/ChangeLog:
* arc-nps400-tbl.h: Add xldb, xldw, xld, xstb, xstw, and xst
instructions.
* arc-opc.c (insert_nps_cmem_uimm16): New function.
(extract_nps_cmem_uimm16): New function.
(arc_operands): Add NPS_XLDST_UIMM16 operand.
This commit introduces the nps400 machine type as a variant of arc.
There's a new flag in the assembler to select this machine type. All
other changes are just adding handling of the new machine type into the
relevant places.
The nps400 is an arc700 variant with some vendor specific instructions
added into the instruction set. This commit does not add any of the new
instructions, this is just laying the groundwork for future commits.
However, in preparation for these new instructions a new opcode define for
nps400 has been added to include/opcode/arc.h, this new opcode define is
used in the assembler and disassembler along with the existing define
for arc700 such that when assembling and disassembling for nps400 the
user will have access to all arc700 instructions and all the nps400
vendor extension instructions.
bfd/ChangeLog:
* archures.c (bfd_mach_arc_nps400): Define.
* bfd-in2.h: Regenerate.
* cpu-arc.c (arch_info_struct): New entry for nps400, renumber
some existing entries to make space.
* elf32-arc.c (arc_elf_object_p): Add nps400 case.
(arc_elf_final_write_processing): Likewise.
binutils/ChangeLog:
* readelf.c (decode_ARC_machine_flags): Handle nps400.
gas/ChangeLog:
* config/tc-arc.c (cpu_types): Add nps400 entry.
(check_zol): Handle nps400.
include/ChangeLog:
* elf/arc.h (E_ARC_MACH_NPS400): Define.
* opcode/arc.h (ARC_OPCODE_NPS400): Define.
opcodes/ChangeLog:
* arc-dis.c (print_insn_arc): Handle nps400.
The constant EF_ARC_CPU_GENERIC is defined in the include/elf/arc.h
file, and is used in a few places in binutils, however, this constant
should never make it into the elf header flags; we always set a valid
cpu type in the assembler, which should then be copied over during
linking.
There are some non-gnu arc compilers that don't write an architecture
type into the e_flags field, instead leaving the field as 0, which is
the EF_ARC_CPU_GENERIC value. This non-gnu compiler uses the machine
type to distinguish between the old and newer arc architectures, setting
the machine type to EM_ARC_COMPACT for old arc600, arc601, and arc700
architectures, while using EM_ARC_COMPACT2 for newer arcem and archs
architectures.
Previously when displaying the machine flags for an older EM_ARC_COMPACT
machine, if the e_flags had not been filled in, then we relied on the
default case statement to display the message "Generic ARCompact", while
in the EM_ARC_COMPACT2 case we specifically handled EF_ARC_CPU_GENERIC
to print "ARC Generic", leaving the default case to print a message
about unrecognised cpu flag.
After this commit EF_ARC_CPU_GENERIC has been removed, for both machine
types EM_ARC_COMPACT and EM_ARC_COMPACT2 we now rely on the default case
statement to handle the situation where the e_flags has not been filled
in. The message displayed is now "Unknown ARCompact" (for older arc
architectures) and "Unknown ARC" (for the newer architectures). The
switch from "Generic" to "Unknown" in the message string is for clarity,
calling the file "Generic" can give the impression that the file is
compiled for a common sub-set of the architectures, and would therefore
run on any type of machine (or at least any type of new or old machine
depending on if the machine type is ARC or ARCv2). However, this was
not what "Generic" meant, it really meant "Unknown", so that's what we
now say.
As part of the merging of the readelf flag reading code, I have unified
the strings used in displaying the ELF ABI. This means that for older
arc machines (arc600, arc601, and arc700) the string used for the
original ABI, and ABIv2 have changed, the current ABIv3 remains the
same. For the newer architectures (arcem and archs) the abi strings
remain unchanged in all cases.
bfd/ChangeLog:
* elf32-arc.c (arc_elf_print_private_bfd_data): Remove use of
EF_ARC_CPU_GENERIC.
(arc_elf_final_write_processing): Don't bother setting cpu field
in e_flags, this will have been set elsewhere.
binutils/ChangeLog:
* readelf.c (get_machine_flags): Move arc processing into...
(decode_ARC_machine_flags): ... new function. Remove use of
EF_ARC_CPU_GENERIC, change default case from "generic arc" to
"unknown arc". Merged ABI printing between two machine types.
gas/ChangeLog:
* config/tc-arc.c (arc_select_cpu): Remove use of
EF_ARC_CPU_GENERIC.
include/ChangeLog:
* elf/arc.h (EF_ARC_CPU_GENERIC): Delete. Update related comment.
In the include/elf/arc.h there are two constants that mask out the
machine architecture field. One is used lots (EF_ARC_MACH_MSK), the
other is used only once (EF_ARC_MACH). Remove EF_ARC_MACH.
bfd/ChangeLog:
* elf32-arc.c (arc_elf_final_write_processing): Switch to using
EF_ARC_MACH_MSK.
include/ChangeLog:
* elf/arc.h (EF_ARC_MACH): Delete.
(EF_ARC_MACH_MSK): Remove out of date comment.
bfd/
2016-03-08 Cupertino Miranda <Cupertino.Miranda@synopsys.com>
Andrew Burgess <andrew.burgess@embecosm.com>
* elf32-arc.c (arc_bfd_get_32): Becomes an alias for bfd_get_32.
(arc_bfd_put_32): Becomes an alias for bfd_put_32.
(arc_elf_howto_init): Added assert to validate relocations.
(get_middle_endian_relocation): Delete.
(middle_endian_convert): New function.
(ME): Redefine, now does nothing.
(IS_ME): New define.
(arc_do_relocation): Extend the attached 'ARC_RELOC_HOWTO'
definition to call middle_endian_convert. Add a new local
variable and make use of this throughout. Added call to
arc_bfd_get_8 and arc_bfd_put_8 for 8 bit relocations.
gas/
2016-03-08 Andrew Burgess <andrew.burgess@embecosm.com>
* testsuite/gas/arc/inline-data-1.d: New file.
* testsuite/gas/arc/inline-data-1.s: New file.
include/
2016-03-08 Cupertino Miranda <Cupertino.Miranda@synopsys.com>
Andrew Burgess <andrew.burgess@embecosm.com>
* elf/arc-reloc.def: Add a call to ME within the formula for each
relocation that requires middle-endian correction.
bfd/ChangeLog:
* arc-plt.def: New file.
* arc-plt.h: Likewise.
* elf32-arc.c (elf_arc_abs_plt0_entry, elf_arc_abs_pltn_entry,
elf_arcV2_abs_plt0_entry, elf_arcV2_abs_pltn_entry,
elf_arc_pic_plt0_entry, elf_arc_pic_pltn_entry,
elf_arcV2_pic_plt0_entry, elf_arcV2_pic_pltn_entry): Remove.
(name_for_global_symbol): Added.
(ADD_RELA): Helper to create dynamic relocs.
(new_got_entry_to_list): Create a new got entry in linked list.
(symbol_has_entry_of_type): Search for specific type of entry in
list.
(is_reloc_for_GOT): return FALSE for any TLS related relocs.
(is_reloc_for_TLS, arc_elf_set_private_flags)
(arc_elf_print_private_bfd_data, arc_elf_copy_private_bfd_data)
(arc_elf_merge_private_bfd_data): New functions.
(debug_arc_reloc): Cleaned debug info printing.
(PDATA reloc): Changed not to perform address alignment.
(reverse_me): Added. Fix for ARC_32 relocs.
(arc_do_relocation): Return bfd_reloc_of when no relocation should
occur.
(arc_get_local_got_ents): Renamed from arc_get_local_got_offsets.
Changed function to access an array of list of GOT entries instead
of just an array of offsets.
(elf_arc_relocate_section): Added support for PIC and TLS related relocations.
(elf_arc_check_relocs): Likewise.
(elf_arc_adjust_dynamic_symbol, elf_arc_finish_dynamic_symbol,
(elf_arc_finish_dynamic_sections): Likewise
(arc_create_dynamic_sections): Modified conditions to create
dynamic sections.
(ADD_SYMBOL_REF_SEC_AND_RELOC): New macro.
(plt_do_relocs_for_symbol, relocate_plt_for_symbol)
(relocate_plt_for_entry): Changed to support new way to define PLT
related code.
(add_symbol_to_plt): Likewise.
(arc_elf_link_hash_table_create): New function.
include/ChangeLog:
* elf/arc-reloc.def (ARC_32, ARC_GOTPC, ARC_TLS_GD_GOT)
(ARC_TLS_IE_GOT, ARC_TLS_DTPOFF, ARC_TLS_DTPOFF_S9, ARC_TLS_LE_S9)
(ARC_TLS_LE_32): Fixed formula.
(ARC_TLS_GD_LD): Use new special function.
* opcode/arc-func.h: Changed all the replacement
functions to clear the patching bits before doing an or it with the value
argument.
Chenghua Xu
H.J. Lu
John Darrington
Richard Earnshaw
claziss
Andrew Jenner
Alan Modra
Alan Hayward
Faraz Shahbazker
Scott Egerton
Max Filippov
Jim Wilson
Francois H. Theron
Christophe Lyon
Michael Eager
Renlin Li
Simon Marchi
James Bowman
James Bowman
John Baldwin
Alexander Fedotov-B55613
Gustavo Romero
John Eric Martin
Yuri Chornovian
Andreas Arnez
Maciej W. Rozycki
Kuan-Lin Chen
Thomas Preud'homme
Andreas Krebbel
Anton Kolesov
Jose E. Marchesi
Palmer Dabbelt
Pip Cet
Nick Clifton
Dimitar Dimitrov
Andrew Waterman
Cupertino Miranda
Andre Vieria
Trevor Saunders
Graham Markall
Matthew Fortune
Andrew Burgess
Miranda Cupertino