588925d065
opcodes/
...
* ppc-opc.c <RSQ, RTQ>: Use PPC_OPERAND_GPR.
gas/testsuite/
* gas/ppc/power4.s <lq, stq>: Add more tests.
* gas/ppc/power4.d: Likewise.
2012-08-15 21:25:21 +00:00
9f6a6cc022
opcodes/
...
* ppc-opc.c <xnop, yield, mdoio, mdoom>: New extended mnemonics.
gas/testsuite/
* gas/ppc/common.d ("nop", "xnop"): Add tests.
* gas/ppc/common.s: Likewise.
* gas/ppc/power7.d ("yield", "mdoio", "mdoom"): Add tests.
* gas/ppc/power7.s: Likewise.
2012-08-15 15:33:25 +00:00
03edbe3bfb
2012-07-25 James Lemke <jwlemke@codesourcery.com>
...
* ppc-opc.c (powerpc_opcodes): Add/remove PPCVLE for some 32-bit insns.
2012-07-25 13:08:55 +00:00
c7a8dbf91f
opcodes/
...
* ppc-opc.c (lvsl, lvebx, isellt, icbt, ldepx, lwepx, lvsr, lvehx)
(iselgt, lvewx, iseleq, isel, dcbst, dcbstep, dcbfl, dcbf, lbepx)
(lvx, dcbfep, dcbtstls, stvebx, dcbtstlse, stdepx, stwepx, dcbtls)
(stvehx, dcbtlse, stvewx, stbepx, icblc, stvx, dcbtstt, dcbtst)
(dcbtst, dcbtstep, dcbtt, dcbt, dcbt, lhepx, eciwx, dcbtep)
(dcread, lxvdsx, lvxl, dcblc, sthepx, ecowx, dcbi, dcread, icbtls)
(stvxl, lxsdx, lfdepx, stxsdx, stfdepx, dcba, dcbal, lxvw4x)
(tlbivax, lfdpx, lxvd2x, tlbsrx., stxvw4x, tlbsx, tlbsx., stfdpx)
(stfqx, stxvd2x, icbi, icbiep, icread, dcbzep): Change RA to RA0.
gas/testsuite/
* gas/ppc/e500mc.d: Update.
* gas/ppc/476.d: Update.
2012-06-11 08:20:43 +00:00
a4ebc835cb
* ppc-opc.c (powerpc_macros): Add entries for e_extlwi to e_clrlslwi.
2012-05-18 00:39:28 +00:00
98c76446ea
* ppc-opc.c (extract_sprg): Use ALLOW8_SPRG to include VLE.
2012-05-18 00:30:47 +00:00
df7b86aa4c
PR 14072
...
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* sysdep.h: Generate an error if included before config.h.
* alpha-opc.c: Include sysdep.h before any other header file.
* alpha-dis.c: Likewise.
* avr-dis.c: Likewise.
* cgen-opc.c: Likewise.
* cr16-dis.c: Likewise.
* cris-dis.c: Likewise.
* crx-dis.c: Likewise.
* d10v-dis.c: Likewise.
* d10v-opc.c: Likewise.
* d30v-dis.c: Likewise.
* d30v-opc.c: Likewise.
* h8500-dis.c: Likewise.
* i370-dis.c: Likewise.
* i370-opc.c: Likewise.
* m10200-dis.c: Likewise.
* m10300-dis.c: Likewise.
* micromips-opc.c: Likewise.
* mips-opc.c: Likewise.
* mips61-opc.c: Likewise.
* moxie-dis.c: Likewise.
* or32-opc.c: Likewise.
* pj-dis.c: Likewise.
* ppc-dis.c: Likewise.
* ppc-opc.c: Likewise.
* s390-dis.c: Likewise.
* sh-dis.c: Likewise.
* sh64-dis.c: Likewise.
* sparc-dis.c: Likewise.
* sparc-opc.c: Likewise.
* spu-dis.c: Likewise.
* tic30-dis.c: Likewise.
* tic54x-dis.c: Likewise.
* tic80-dis.c: Likewise.
* tic80-opc.c: Likewise.
* tilegx-dis.c: Likewise.
* tilepro-dis.c: Likewise.
* v850-dis.c: Likewise.
* v850-opc.c: Likewise.
* vax-dis.c: Likewise.
* w65-dis.c: Likewise.
* xgate-dis.c: Likewise.
* xtensa-dis.c: Likewise.
* rl78-decode.opc: Likewise.
* rl78-decode.c: Regenerate.
* rx-decode.opc: Likewise.
* rx-decode.c: Regenerate.
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* sysdep.h: Generate an error if included before config.h.
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* aclocal.m4: Regenerate.
* bfd-in.h: Generate an error if included before config.h.
* sysdep.h: Likewise.
* bfd-in2.h: Regenerate.
* compress.c: Remove #include "config.h".
* plugin.c: Likewise.
* elf32-m68hc1x.c: Include sysdep.h before alloca-conf.h.
* elf64-hppa.c: Likewise.
* som.c: Likewise.
* xsymc.c: Likewise.
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* aclocal.m4: Regenerate.
* Makefile.am: Use wrappers around C files generated by flex.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
* itbl-lex-wrapper.c: New file.
* config/bfin-lex-wrapper.c: New file.
* cgen.c: Include as.h before setjmp.h.
* config/tc-dlx.c: Include as.h before any other header.
* config/tc-h8300.c: Likewise.
* config/tc-lm32.c: Likewise.
* config/tc-mep.c: Likewise.
* config/tc-microblaze.c: Likewise.
* config/tc-mmix.c: Likewise.
* config/tc-msp430.c: Likewise.
* config/tc-or32.c: Likewise.
* config/tc-tic4x.c: Likewise.
* config/tc-tic54x.c: Likewise.
* config/tc-xtensa.c: Likewise.
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* unwind-ia64.h: Include config.h.
2012-05-17 15:13:28 +00:00
b9c361e0ad
Add support for PowerPC VLE.
...
2012-05-14 Catherine Moore <clm@codesourcery.com>
* NEWS: Mention PowerPC VLE port.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
Catherine Moore <clm@codesourcery.com>
bfd/
* bfd.c (bfd_lookup_section_flags): Add section parm.
* ecoff.c (bfd_debug_section): Remove flag_info initializer.
* elf-bfd.h (bfd_elf_section_data): Move in section_flag_info.
(bfd_elf_lookup_section_flags): Add section parm.
* elf32-ppc.c (is_ppc_vle): New function.
(ppc_elf_modify_segment_map): New function.
(elf_backend_modify_segment_map): Define.
(has_vle_insns): New define.
* elf32-ppc.h (ppc_elf_modify_segment_map): Declare.
* elflink.c (bfd_elf_lookup_section_flags): Add return value & parm.
Move in logic to omit / include a section.
* libbfd-in.h (bfd_link_info): Add section parm.
(bfd_generic_lookup_section_flags): Likewise.
* reloc.c (bfd_generic_lookup_section_flags): Likewise.
* section.c (bfd_section): Move out section_flag_info.
(BFD_FAKE_SECTION): Remove flag_info initializer.
* targets.c (_bfd_lookup_section_flags): Add section parm.
2012-05-14 Catherine Moore <clm@codesourcery.com>
bfd/
* archures.c (bfd_mach_ppc_vle): New.
* bfd-in2.h: Regenerated.
* cpu-powerpc.c (bfd_powerpc_archs): New entry for vle.
* elf32-ppc.c (split16_format_type): New enumeration.
(ppc_elf_vle_split16): New function.
(HOWTO): Add entries for R_PPC_VLE relocations.
(ppc_elf_reloc_type_lookup): Handle PPC_VLE relocations.
(ppc_elf_section_flags): New function.
(ppc_elf_lookup_section_flags): New function.
(ppc_elf_section_processing): New function.
(ppc_elf_check_relocs): Handle PPC_VLE relocations.
(ppc_elf_relocation_section): Likewise.
(elf_backend_lookup_section_flags_hook): Define.
(elf_backend_section_flags): Define.
(elf_backend_section_processing): Define.
* elf32-ppc.h (ppc_elf_section_processing): Declare.
* libbfd.h: Regenerated.
* reloc.c (BFD_RELOC_PPC_VLE_REL8, BFD_RELOC_PPC_VLE_REL15,
BFD_RELOC_PPC_VLE_REL24, BFD_RELOC_PPC_VLE_LO16A,
BFD_RELOC_PPC_VLE_LO16D, BFD_RELOC_PPC_VLE_HI16A,
BFD_RELOC_PPC_VLE_HI16D, BFD_RELOC_PPC_VLE_HA16A,
BFD_RELOC_PPC_VLE_HA16D, BFD_RELOC_PPC_VLE_SDA21,
BFD_RELOC_PPC_VLE_SDA21_LO, BFD_RELOC_PPC_VLE_SDAREL_LO16A,
BFD_RELOC_PPC_VLE_SDAREL_LO16D, BFD_RELOC_PPC_VLE_SDAREL_HI16A,
BFD_RELOC_PPC_VLE_SDAREL_HI16D, BFD_RELOC_PPC_VLE_SDAREL_HA16A,
BFD_RELOC_PPC_VLE_SDAREL_HA16D): New bfd relocations.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
gas/
* config/tc-ppc.c (insn_validate): New func of existing code to call..
(ppc_setup_opcodes): ..from 2 places here.
Revise for second (VLE) opcode table.
Add #ifdef'd code to print opcode tables.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
gas/
* config/tc-ppc.c (ppc_setup_opcodes): Allow out-of-order
for the VLE conditional branches.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
gas/
* config/tc-ppc.c (PPC_VLE_SPLIT16A): New macro.
(PPC_VLE_SPLIT16D): New macro.
(PPC_VLE_LO16A): New macro.
(PPC_VLE_LO16D): New macro.
(PPC_VLE_HI16A): New macro.
(PPC_VLE_HI16D): New macro.
(PPC_VLE_HA16A): New macro.
(PPC_VLE_HA16D): New macro.
(PPC_APUINFO_VLE): New definition.
(md_chars_to_number): New function.
(md_parse_option): Check for combinations of little
endian and -mvle.
(md_show_usage): Document -mvle.
(ppc_arch): Recognize VLE.
(ppc_mach): Recognize bfd_mach_ppc_vle.
(ppc_setup_opcodes): Print the opcode table if
* config/tc-ppc.h (ppc_frag_check): Declare.
* doc/c-ppc.texi: Document -mvle.
* NEWS: Mention PowerPC VLE port.
2012-05-14 Catherine Moore <clm@codesourcery.com>
gas/
* config/tc-ppc.h (ppc_dw2_line_min_insn_length): Declare.
(DWARF2_LINE_MIN_INSN_LENGTH): Redefine.
* config/tc-ppc.c (ppc_dw2_line_min_insn_length): New.
* dwarf2dbg.c (scale_addr_delta): Handle values of 1
for DWARF2_LINE_MIN_INSN_LENGTH.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
gas/testsuite/
* gas/ppc/ppc.exp: Run new tests.
* gas/ppc/vle-reloc.d: New test.
* gas/ppc/vle-reloc.s: New test.
* gas/ppc/vle-simple-1.d: New test.
* gas/ppc/vle-simple-1.s: New test.
* gas/ppc/vle-simple-2.d: New test.
* gas/ppc/vle-simple-2.s: New test.
* gas/ppc/vle-simple-3.d: New test.
* gas/ppc/vle-simple-3.s: New test.
* gas/ppc/vle-simple-4.d: New test.
* gas/ppc/vle-simple-4.s: New test.
* gas/ppc/vle-simple-5.d: New test.
* gas/ppc/vle-simple-5.s: New test.
* gas/ppc/vle-simple-6.d: New test.
* gas/ppc/vle-simple-6.s: New test.
* gas/ppc/vle.d: New test.
* gas/ppc/vle.s: New test.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
include/elf/
* ppc.h (SEC_PPC_VLE): Remove.
2012-05-14 Catherine Moore <clm@codesourcery.com>
James Lemke <jwlemke@codesourcery.com>
include/elf/
* ppc.h (R_PPC_VLE_REL8): New reloction.
(R_PPC_VLE_REL15): Likewise.
(R_PPC_VLE_REL24): Likewise.
(R_PPC_VLE_LO16A): Likewise.
(R_PPC_VLE_LO16D): Likewise.
(R_PPC_VLE_HI16A): Likewise.
(R_PPC_VLE_HI16D): Likewise.
(R_PPC_VLE_HA16A): Likewise.
(R_PPC_VLE_HA16D): Likewise.
(R_PPC_VLE_SDA21): Likewise.
(R_PPC_VLE_SDA21_LO): Likewise.
(R_PPC_VLE_SDAREL_LO16A): Likewise.
(R_PPC_VLE_SDAREL_LO16D): Likewise.
(R_PPC_VLE_SDAREL_HI16A): Likewise.
(R_PPC_VLE_SDAREL_HI16D): Likewise.
(R_PPC_VLE_SDAREL_HA16A): Likewise.
(R_PPC_VLE_SDAREL_HA16D): Likewise.
(SEC_PPC_VLE): Remove.
(PF_PPC_VLE): New program header flag.
(SHF_PPC_VLE): New section header flag.
(vle_opcodes, vle_num_opcodes): New.
(VLE_OP): New macro.
(VLE_OP_TO_SEG): New macro.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
include/opcode/
* ppc.h (PPC_OPCODE_VLE): New definition.
(PPC_OP_SA): New macro.
(PPC_OP_SE_VLE): New macro.
(PPC_OP): Use a variable shift amount.
(powerpc_operand): Update comments.
(PPC_OPSHIFT_INV): New macro.
(PPC_OPERAND_CR): Replace with...
(PPC_OPERAND_CR_BIT): ...this and
(PPC_OPERAND_CR_REG): ...this.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
ld/
* ldlang.c (walk_wild_consider_section): Don't copy section_flag_list.
Pass it to callback.
(walk_wild_section_general): Pass section_flag_list to callback.
(lang_add_section): Add sflag_list parm.
Move out logic to keep / omit a section & call bfd_lookup_section_flags.
(output_section_callback_fast): Add sflag_list parm.
Add new parm to lang_add_section calls.
(output_section_callback): Likewise.
(check_section_callback): Add sflag_list parm.
(lang_place_orphans): Add new parm to lang_add_section calls.
(gc_section_callback): Add sflag_list parm.
(find_relro_section_callback): Likewise.
* ldlang.h (callback_t): Add flag_info parm.
(lang_add_section): Add sflag_list parm.
* emultempl/armelf.em (elf32_arm_add_stub_section):
Add lang_add_section parm.
* emultempl/beos.em (gld*_place_orphan): Likewise.
* emultempl/elf32.em (gld*_place_orphan): Likewise.
* emultempl/hppaelf.em (hppaelf_add_stub_section): Likewise.
* emultempl/m68hc1xelf.em (m68hc11elf_add_stub_section): Likewise.
* emultempl/mipself.em (mips_add_stub_section): Likewise.
* emultempl/mmo.em (mmo_place_orphan): Likewise.
* emultempl/pe.em (gld_*_place_orphan): Likewise.
* emultempl/pep.em (gld_*_place_orphan): Likewise.
* emultempl/ppc64elf.em (ppc_add_stub_section): Likewise.
* emultempl/spuelf.em (spu_place_special_section): Likewise.
* emultempl/vms.em (vms_place_orphan): Likewise.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
ld/testsuite/
* ld-powerpc/powerpc.exp: Create ppceabitests.
* ld-powerpc/vle-multiseg.s: New.
* ld-powerpc/vle-multiseg-1.d: New.
* ld-powerpc/vle-multiseg-1.ld: New.
* ld-powerpc/vle-multiseg-2.d: New.
* ld-powerpc/vle-multiseg-2.ld: New.
* ld-powerpc/vle-multiseg-3.d: New.
* ld-powerpc/vle-multiseg-3.ld: New.
* ld-powerpc/vle-multiseg-4.d: New.
* ld-powerpc/vle-multiseg-4.ld: New.
* ld-powerpc/vle-multiseg-5.d: New.
* ld-powerpc/vle-multiseg-5.ld: New.
* ld-powerpc/vle-multiseg-6.d: New.
* ld-powerpc/vle-multiseg-6.ld: New.
* ld-powerpc/vle-multiseg-6a.s: New.
* ld-powerpc/vle-multiseg-6b.s: New.
* ld-powerpc/vle-multiseg-6c.s: New.
* ld-powerpc/vle-multiseg-6d.s: New.
* ld-powerpc/powerpc.exp: Run new tests.
2012-05-14 Catherine Moore <clm@codesourcery.com>
ld/
* NEWS: Mention PowerPC VLE port.
2012-05-14 Catherine Moore <clm@codesourcery.com>
ld/testsuite/
* ld-powerpc/apuinfo.rd: Update for VLE.
* ld-powerpc/vle-reloc-1.d: New.
* ld-powerpc/vle-reloc-1.s: New.
* ld-powerpc/vle-reloc-2.d: New.
* ld-powerpc/vle-reloc-2.s: New.
* ld-powerpc/vle-reloc-3.d: New.
* ld-powerpc/vle-reloc-3.s: New.
* ld-powerpc/vle-reloc-def-1.s: New.
* ld-powerpc/vle-reloc-def-2.s: New.
* ld-powerpc/vle-reloc-def-3.s: New.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
opcodes/
* ppc-dis.c (get_powerpc_dialect): Use is_ppc_vle.
(PPC_OPCD_SEGS, VLE_OPCD_SEGS): New defines.
(vle_opcd_indices): New array.
(lookup_vle): New function.
(disassemble_init_powerpc): Revise for second (VLE) opcode table.
(print_insn_powerpc): Likewise.
* ppc-opc.c: Likewise.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
Nathan Froyd <froydnj@codesourcery.com>
opcodes/
* ppc-opc.c (insert_arx, extract_arx): New functions.
(insert_ary, extract_ary): New functions.
(insert_li20, extract_li20): New functions.
(insert_rx, extract_rx): New functions.
(insert_ry, extract_ry): New functions.
(insert_sci8, extract_sci8): New functions.
(insert_sci8n, extract_sci8n): New functions.
(insert_sd4h, extract_sd4h): New functions.
(insert_sd4w, extract_sd4w): New functions.
(insert_vlesi, extract_vlesi): New functions.
(insert_vlensi, extract_vlensi): New functions.
(insert_vleui, extract_vleui): New functions.
(insert_vleil, extract_vleil): New functions.
(BI_MASK, BB_MASK, BT): Use PPC_OPERAND_CR_BIT.
(BI16, BI32, BO32, B8): New.
(B15, B24, CRD32, CRS): New.
(CRD, OBF, BFA, CR, CRFS): Use PPC_OPERAND_CR_REG.
(DB, IMM20, RD, Rx, ARX, RY, RZ): New.
(ARY, SCLSCI8, SCLSCI8N, SE_SD, SE_SDH): New.
(SH6_MASK): Use PPC_OPSHIFT_INV.
(SI8, UI5, OIMM5, UI7, BO16): New.
(VLESIMM, VLENSIMM, VLEUIMM, VLEUIMML): New.
(XT6, XA6, XB6, XB6S, XC6): Use PPC_OPSHIFT_INV.
(ALLOW8_SPRG): New.
(insert_sprg, extract_sprg): Check ALLOW8_SPRG.
(OPVUP, OPVUP_MASK OPVUP): New
(BD8, BD8_MASK, BD8IO, BD8IO_MASK): New.
(EBD8IO, EBD8IO1_MASK, EBD8IO2_MASK, EBD8IO3_MASK): New.
(BD15, BD15_MASK, EBD15, EBD15_MASK, EBD15BI, EBD15BI_MASK): New.
(BD24,BD24_MASK, C_LK, C_LK_MASK, C, C_MASK): New.
(IA16, IA16_MASK, I16A, I16A_MASK, I16L, I16L_MASK): New.
(IM7, IM7_MASK, LI20, LI20_MASK, SCI8, SCI8_MASK): New.
(SCI8BF, SCI8BF_MASK, SD4, SD4_MASK): New.
(SE_IM5, SE_IM5_MASK): New.
(SE_R, SE_R_MASK, SE_RR, SE_RR_MASK): New.
(EX, EX_MASK, BO16F, BO16T, BO32F, BO32T): New.
(BO32DNZ, BO32DZ): New.
(NO371, PPCSPE, PPCISEL, PPCEFS, MULHW): Include PPC_OPCODE_VLE.
(PPCVLE): New.
(powerpc_opcodes): Add new VLE instructions. Update existing
instruction to include PPCVLE if supported.
* ppc-dis.c (ppc_opts): Add vle entry.
(get_powerpc_dialect): New function.
(powerpc_init_dialect): VLE support.
(print_insn_big_powerpc): Call get_powerpc_dialect.
(print_insn_little_powerpc): Likewise.
(operand_value_powerpc): Handle negative shift counts.
(print_insn_powerpc): Handle 2-byte instruction lengths.
2012-05-14 19:45:30 +00:00
aea77599d0
include/opcode/
...
* ppc.h: Add PPC_OPCODE_ALTIVEC2, PPC_OPCODE_E6500, PPC_OPCODE_TMR.
opcodes/
* ppc-dis.c (ppc_opts): Add entries for "e5500" and "e6500".
* ppc-opc.c (insert_ls, TMR, ESYNC, XSYNCLE_MASK): New.
(PPCVEC2, PPCTMR, E6500): New short names.
(powerpc_opcodes): Add vabsdub, vabsduh, vabsduw, dni, mvidsplt,
mviwsplt, icblq., mftmr, mttmr, dcblq., miso, lvexbx, lvexhx,
lvexwx, stvexbx, stvexhx, stvexwx, lvepx, lvepxl, stvepx, stvepxl,
lvtrx, lvtrxl, lvtlx, lvtlxl, stvfrx, stvfrxl, stvflx, stvflxl,
lvswx, lvswxl, stvswx, stvswxl, lvsm mnemonics. Accept LS, ESYNC
optional operands on sync instruction for E6500 target.
bfd/
* archures.c: Add bfd_mach_ppc_e5500 and bfd_mach_ppc_e6500.
* bfd-in2.h: Regenerate.
* cpu-powerpc.c (bfd_powerpc_archs): Add entryies for
bfd_mach_ppc_e5500 and bfd_mach_ppc_e6500.
gas/
* config/tc-ppc.c (md_show_usage): Document -me5500 and -me6500.
(ppc_handle_align): Add termination nop opcode for e500mc family.
* doc/as.texinfo: Document options -me5500 and -me6500.
* doc/c-ppc.texi: Likewise.
gas/testsuite/
* gas/ppc/e500mc64_nop.s: New test case for e500mc family
termination nops.
* gas/ppc/e500mc64_nop.d: Likewise.
* gas/ppc/e5500_nop.s: Likewise.
* gas/ppc/e5500_nop.d: Likewise.
* gas/ppc/e6500_nop.s: Likewise.
* gas/ppc/e6500_nop.d: Likewise.
* gas/ppc/e6500.s: New.
* gas/ppc/e6500.d: Likewise.
* gas/ppc/ppc.exp: Run e6500, e500mc64_nop, e5500_nop, and e6500_nop.
2012-03-09 23:39:06 +00:00
8ebac3aae9
* ppc-opc.c (ISA_V2): Define and use for relevant BO field tests.
...
(valid_bo_pre_v2, valid_bo_post_v2): New functions, extracted from..
(valid_bo): ..here. When disassembling, accept either 'y' or 'at'
type encoding on second pass.
(powerpc_opcodes): Use ISA_V2 to enable branch insns rather than
POWER4.
* ppc-dis.c (print_insn_powerpc): Delete dialect_orig. Instead
ignore deprecated on second pass.
2011-12-13 08:19:02 +00:00
a08fc94222
opcodes/
...
* ppc-opc.c (powerpc_opcodes) <drrndq, drrndq., dtstexq, dctqpq,
dctqpq., dctfixq, dctfixq., dxexq, dxexq., dtstsfq, dcffixq, dcffixq.,
diexq, diexq.>: Use FRT, FRA, FRB and FRBp repsectively on DFP quad
instructions.
2011-10-27 15:44:01 +00:00
989993d80a
gas/testsuite/
...
2011-09-28 Jan Beulich <jbeulich@suse.com>
* gas/ppc/476.s: Fix lswi first operand.
* gas/ppc/476.d: Adjust expected output.
* gas/ppc/a2.s: Fix lswi first operand.
* gas/ppc/a2.d: Adjust expected output.
* gas/ppc/power6.s: Fix lfdpx first operand.
* gas/ppc/power6.d: Adjust expected output.
opcodes/
2011-09-28 Jan Beulich <jbeulich@suse.com>
* ppc-opc.c (insert_nbi, insert_rbx, FRAp, FRBp, FRSp, FRTp, NBI, RAX,
RBX): New.
(insert_bo, insert_boe): Reject bcctr with bit 2 in bo unset.
(powerpc_opcodes): Use RAX for second and RBXC for third operand of
lswx. Use NBI for third operand of lswi. Use FRTp for first operand of
lfdp and lfdpx. Use FRSp for first operand of stfdp and stfdpx, and
mark them as invalid on POWER7. Use FRTp, FRAp, and FRBp repsectively
on DFP quad instructions.
2011-10-06 09:22:58 +00:00
2f7f771012
* ppc-opc.c: (powerpc_opcodes): Enable icswx for POWER7.
2011-04-25 23:11:21 +00:00
6b069ee70d
* ppc-opc.c (NON32, NO371): Remove PPC_OPCODE_PPCPS.
2011-01-21 00:53:11 +00:00
f383de6633
opcodes/
...
* ppc-opc.c (powerpc_opcodes) [lswx,lswi,stswx,stswi]: Deprecate
on E500 and E500MC.
2010-08-27 13:59:55 +00:00
bdc70b4a03
include/opcode/
...
* ppc.h (PPC_OPCODE_32, PPC_OPCODE_BOOKE64, PPC_OPCODE_CLASSIC): Delete.
Renumber other PPC_OPCODE defines.
gas/
* config/tc-ppc.c (ppc_set_cpu): Remove old opcode flags.
(ppc_setup_opcodes): Likewise. Simplify opcode selection.
opcodes/
* ppc-dis.c (ppc_opts, powerpc_init_dialect): Remove old opcode flags.
* ppc-opc.c (PPC32, POWER32, COM32, CLASSIC): Delete.
(PPC64, MFDEC2): Update.
(NON32, NO371): Define.
(powerpc_opcode): Update to not use old opcode flags, and avoid
-m601 duplicates.
2010-07-03 06:51:56 +00:00
81a0b7e2ae
* ppc-opc.c (PWR2COM): Define.
...
(PPCPWR2): Add PPC_OPCODE_COMMON.
(powerpc_opcodes): Add "subc", "subco", "subco.", "fcir", "fcir.",
"fcirz", "fcirz." to -mcom opcodes. Remove "mfsri", "dclst",
"rac" from -mcom.
2010-07-03 03:33:17 +00:00
09a8ad8d8f
* ppc-opc.c (powerpc_opcodes): Revert deprecation of mfocrf, mtcrf
...
and mtocrf on EFS.
2010-07-01 02:29:12 +00:00
e01d869a3b
gas/
...
* config/tc-ppc.c (md_assemble): Emit APUinfo section for
PPC_OPCODE_E500.
gas/testsuite/
* gas/ppc/e500.s: Add eieio, mbar and lwsync
* gas/ppc/e500.d: Likewise.
include/opcode/
* ppc.h (PPC_OPCODE_E500): Define.
opcodes/
* ppc-dis.c (ppc_opts): Remove PPC_OPCODE_E500MC from e500 and
e500x2. Add PPC_OPCODE_E500 to e500 and e500x2
* ppc-opc.c (powerpc_opcodes): Deprecate all opcodes on EFS which
touch floating point regs and are enabled by COM, PPC or PPCCOM.
Treat sync as msync on e500. Treat eieio as mbar 1 on e500.
Treat lwsync as msync on e500.
2010-06-14 14:48:05 +00:00
51b5d4a8c5
* ppc-opc.c (powerpc_opcodes): Enable divdeu, devweu, divde,
...
divwe, divdeuo, divweuo, divdeo, divweo for A2. Add icswepx.
2010-05-19 03:44:36 +00:00
85d4ac0b3c
Correct wclr encoding.
2010-05-13 06:30:09 +00:00
cee62821d4
opcodes/
...
* ppc-opc.c (RBOPT): New define.
("dccci"): Enable for PPCA2. Make operands optional.
("iccci"): Likewise. Do not deprecate for PPC476.
gas/testsuite/
* gas/ppc/476.d ("dccci", "dci", "iccci"): Add tests.
* gas/ppc/476.s: Likewise.
* gas/ppc/a2.d ("dccci", "dci", "iccci", "ici"): Add tests.
* gas/ppc/a2.s: Likewise.
2010-04-06 16:04:34 +00:00
ce3d2015b2
include/
...
* opcode/ppc.h (PPC_OPCODE_TITAN): Define.
bfd/
* archures.c (bfd_mach_ppc_titan): Define.
* bfd-in2.h: Regenerate.
* cpu-powerpc.c (bfd_powerpc_archs): Add titan entry.
opcodes/
* ppc-dis.c (ppc_opts): Add titan entry.
* ppc-opc.c (TITAN, MULHW): Define.
(powerpc_opcodes): Support AppliedMicro Titan core (APM83xxx).
gas/
* config/tc-ppc.c (md_show_usage): Mention -mtitan. Don't use tabs.
(ppc_mach): Handle titan.
* doc/c-ppc.texi: Mention -mtitan.
gas/testsuite/
* gas/ppc/titan.d, * gas/ppc/titan.s: New test.
* gas/ppc/ppc.exp: Run it.
2010-02-08 01:59:38 +00:00
9fe54b1ca1
gas/
...
* config/tc-ppc.c (md_show_usage): Document -m476.
* doc/c-ppc.texi (PowerPC-Opts): Document -m476.
gas/testsuite/
* gas/ppc/476.s: New test.
* gas/ppc/476.d: Likewise.
* gas/ppc/ppc.exp: Run the 476 test.
include/opcode/
* ppc.h (PPC_OPCODE_476): Define.
opcodes/
* ppc-dis.c (ppc_opts): Add "476" entry.
* ppc-opc.c (PPC476): Define.
(powerpc_opcodes): Update mnemonics where required for 476.
2009-10-02 14:42:42 +00:00
634b50f2a6
gas/
...
* config/tc-ppc.c (md_show_usage): Rename "ppca2" to "a2".
* doc/c-ppc.texi (PowerPC-Opts): Likewise.
gas/testsuite/
* gas/ppc/a2.d: Rename "ppca2" to "a2".
include/opcode/
* ppc.h (PPC_OPCODE_A2): Rename from PPC_OPCODE_PPCA2.
opcodes/
* ppc-opc.c (PPCA2): Use renamed mask PPC_OPCODE_A2.
* ppc-dis.c (ppc_opts): Likewise.
Rename "ppca2" to "a2".
2009-10-01 19:24:48 +00:00
8765b55692
opcodes/
...
* ppc-opc.c (powerpc_opcodes): Remove support for the the "lxsdux",
"lxvd2ux", "lxvw4ux", "stxsdux", "stxvd2ux" and "stxvw4ux" opcodes.
gas/testsuite/
* gas/ppc/vsx.s ("lxsdux", "lxvd2ux", "lxvw4ux", "stxsdux",
"stxvd2ux", "stxvw4ux"): Remove tests.
* gas/ppc/vsx.d: Likewise.
* gas/ppc/power7.s: Likewise.
* gas/ppc/power7.d: Likewise.
2009-09-29 13:19:10 +00:00
e0d602ecff
gas/
...
* config/tc-ppc.c (md_show_usage): Document -mpcca2.
* doc/c-ppc.texi (PowerPC-Opts): Document -mppca2.
gas/testsuite/
* gas/ppc/a2.s: New.
* gas/ppc/a2.d: Likewise.
* gas/ppc/ppc.exp: Run the a2 dump test.
include/opcode/
* ppc.h (PPC_OPCODE_PPCA2): New.
opcodes/
* ppc-dis.c (ppc_opts): Add "ppca2" entry.
* ppc-opc.c (powerpc_opcodes): Add eratilx, eratsx, eratsx.,
eratre, wchkall, eratwe, ldawx., mdfcrx., mfdcr. mtdcrx., icswx,
icswx., mtdcr., dci, wclrone, wclrall, wclr, erativax, tlbsrx.,
ici mnemonics.
(ERAT_T): New operand.
(XWC_MASK): New mask.
(XOPL2): New macro.
(PPCA2): Define.
2009-09-21 10:29:07 +00:00
bdc7fcfe59
* ppc-opc.c (powerpc_macros <extrdi>): Allow n+b of 64.
2009-09-08 09:00:47 +00:00
858d7a6db2
opcodes/
...
* ppc-opc.c (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva",
"tlbilx">: Use secondary opcode "18" as per the ISA 2.06 documentation.
Reorder entries so the extended mnemonics are listed before tlbilx.
gas/testsuite/
* gas/ppc/e500mc.d: Update to match extended mnemonics.
2009-04-07 18:28:02 +00:00
70dc4e324b
opcodes/
...
* ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect
due to -many/-Many.
(print_insn_powerpc): Make sure we only deprecate instructions using
the original dialect and not a modified dialect due to -Many handling.
Move the handling of the condition register and default operands to
the end of the if/else if/else chain.
* ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
instructions from newer processors are listed before older ones.
<"icblce", "sync", "eieio", "tlbld">: Deprecate for processors
that have instructions with conflicting opcodes.
2009-04-02 13:30:56 +00:00
e401b04ca7
opcodes/
...
* ppc-opc.c (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and
E500MC entries.
2009-04-02 00:42:29 +00:00
c72ab5f2c5
opcodes/
...
* ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
instructions from newer processors are listed before older ones.
2009-03-04 01:00:53 +00:00
066be9f7bd
gas/
...
* config/tc-ppc.c (pre_defined_registers): Add "f32" to "f63",
"f.32" to "f.63", "vs0" to "vs63" and "vs.0" to "vs.63".
(parse_cpu): Extend -mpower7 to accept power7 and isel instructions.
gas/testsuite/
* gas/ppc/e500mc.d ("wait", "waitsrv", "waitimpl"): Add tests.
* gas/ppc/e500mc.s: Likewise.
* gas/ppc/power6.d ("cdtbcd", "cbcdtd", "addg6s"): Add tests.
* gas/ppc/power6.s: Likewise.
* gas/ppc/power7.d ("lfdpx", "mffgpr", "mftgpr"): Remove invalid tests.
("wait", "waitsrv", "waitimpl", "divwe", "divwe.", "divweo", "divweo.",
"divweu", "divweu.", "divweuo", "divweuo.", "bpermd", "popcntw",
"popcntd", "ldbrx", "stdbrx", "lfiwzx", "lfiwzx", "fcfids", "fcfids.",
"fcfidus", "fcfidus.", "fctiwu", "fctiwu.", "fctiwuz", "fctiwuz.",
"fctidu", "fctidu.", "fctiduz", "fctiduz.", "fcfidu", "fcfidu.",
"ftdiv", "ftdiv", "ftsqrt", "ftsqrt", "dcbtt", "dcbtstt", "dcffix",
"dcffix.", "lbarx", "lbarx", "lbarx", "lharx", "lharx", "lharx",
"stbcx.", "sthcx.", "fre", "fre.", "fres", "fres.", "frsqrte",
"frsqrte.", "frsqrtes", "frsqrtes.", "isel"): Add tests.
* gas/ppc/power7.s: Likewise.
* gas/ppc/vsx.d: New test.
* gas/ppc/vsx.s: Likewise.
* gas/ppc/ppc.exp: Run it.
include/opcode/
* ppc.h (PPC_OPCODE_POWER7): New.
opcodes/
* ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
the power7 and the isel instructions.
* ppc-opc.c (insert_xc6, extract_xc6): New static functions.
(insert_dm, extract_dm): Likewise.
(XB6): Update comment to include XX2 form.
(WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
(RemoveXX3DM): Delete.
(powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
"mftgpr">: Deprecate for POWER7.
<"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
"frsqrte.">: Deprecate the three operand form and enable the two
operand form for POWER7 and later.
<"wait">: Extend to accept optional parameter. Enable for POWER7.
<"waitsrv", "waitimpl">: Add extended opcodes.
<"ldbrx", "stdbrx">: Enable for POWER7.
<"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
<"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
"divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
"divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
"divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
"fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
"fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
"lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
<"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
"stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
"xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
"xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
"xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
"xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
"xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
"xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
"xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
"xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
"xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
"xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
"xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
"xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
"xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
"xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
"xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
"xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
"xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
"xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
"xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
"xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
"xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
"xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
"xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
"xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
"xxspltw", "xxswapd">: Add VSX opcodes.
2009-02-26 22:07:33 +00:00
0e55be1624
gas/testsuite/
...
* gas/ppc/e500mc.d ("lfdepx", "stfdepx"): Fix tests to expect a
floating point register.
opcodes/
* ppc-opc.c (powerpc_opcodes) <"lfdepx", "stfdepx">: Fix the first
operand to be a float point register (FRT/FRS).
2009-02-19 21:18:46 +00:00
80890a619b
gas/testsuite/
...
* gas/ppc/booke.s ("dcbt", "dcbtst"): New tests.
* gas/ppc/booke.d: Likewise.
* gas/ppc/power4_32.s: Likewise.
* gas/ppc/power4_32.d: Likewise.
opcodes/
* ppc-opc.c: Update copyright year.
(powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand
ordering for POWER4 and later and use the correct Server ordering.
2009-02-06 01:50:54 +00:00
21169fcfad
opcodes/
...
* ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated.
* ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two
operand form and enable the four operand form for POWER6 and later.
<mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the
three operand form for POWER6 and later.
gas/testsuite/
* gas/ppc/power6.s ("mtfsf", "mtfsf.", "mtfsfi", "mtfsfi."): Add tests.
* gas/ppc/power6.d: Likewise.
2009-01-15 04:27:28 +00:00
1cb0a76746
gas/
...
* config/tc-ppc.c (ppc_setup_opcodes): Remove PPC_OPCODE_NOPOWER4 test.
Test the new "deprecated" opcode field.
include/opcode/
* ppc.h (struct powerpc_opcode): New field "deprecated".
(PPC_OPCODE_NOPOWER4): Delete.
opcodes/
* ppc-opc.c (PPCNONE): Define.
(NOPOWER4): Delete.
(powerpc_opcodes): Initialize the new "deprecated" field.
2009-01-09 18:50:58 +00:00
2f3bb96af7
opcodes/
...
* ppc-dis.c (powerpc_init_dialect): Do not set PPC_OPCODE_BOOKE
for -Mbooke.
(print_ppc_disassembler_options): Update usage.
* ppc-opc.c (DE, DES, DEO, DE_MASK): Remove.
(BOOKE64): Remove.
(PPCCHLK64): Likewise.
(powerpc_opcodes): Remove all BOOKE64 instructions.
gas/
* config/tc-ppc.c (parse_cpu): Remove booke64 support. Update
usage strings.
(ppc_setup_opcodes): Likewise, remove booke64 support.
* doc/c-ppc.texi (PowerPC-Opts): Remove -mbooke32 and -mbooke64.
* doc/as.texinfo (Overview): Likewise.
binutils/
* doc/binutils.texi (objdump): Update booke documentation.
* NEWS: Document user-visible changes to command line options.
2008-12-04 10:29:16 +00:00
e1c93c699b
* ppc-opc.c (extract_sprg): Correct operand range check.
2008-11-27 10:47:23 +00:00
899d85bead
PR 6825
...
* ppc-opc.c (powerpc_opcodes): Enable rfci, mfpmr, mtpmr for e300.
2008-08-14 13:56:00 +00:00
9b4e57660d
gas/
...
* config/tc-ppc.c (parse_cpu): Rename altivec_or_spe to retain_flags.
Handle -mvsx and -mpower7.
(md_show_usage): Document -mpower7 and -mvsx.
* doc/as.texinfo (Target PowerPC): Document -mvsx.
* doc/c-ppc.texi (PowerPC-Opts): Document -mvsx and -mpower7.
gas/testsuite/
* gas/ppc/power7.d: New.
* gas/ppc/power7.s: Likewise.
* gas/ppc/ppc.exp: Run power7 test.
include/opcode/
* ppc.h (PPC_OPCODE_VSX, PPC_OPERAND_VSR): New.
opcodes/
* ppc-dis.c (powerpc_init_dialect): Handle power7 and vsx options.
(print_insn_powerpc): Prepend 'vs' when printing VSX registers.
(print_ppc_disassembler_options): Document -Mpower7 and -Mvsx.
* ppc-opc.c (insert_xt6): New static function.
(extract_xt6): Likewise.
(insert_xa6): Likewise.
(extract_xa6: Likewise.
(insert_xb6): Likewise.
(extract_xb6): Likewise.
(insert_xb6s): Likewise.
(extract_xb6s): Likewise.
(XS6, XT6, XA6, XB6, XB6S, DM, XX3, XX3DM, XX1_MASK, XX3_MASK,
XX3DM_MASK, PPCVSX): New.
(powerpc_opcodes): Add opcodes "lxvd2x", "lxvd2ux", "stxvd2x",
"stxvd2ux", "xxmrghd", "xxmrgld", "xxpermdi", "xvmovdp", "xvcpsgndp".
2008-08-02 04:38:51 +00:00
081ba1b3c0
include/opcode/
...
* ppc.h (PPC_OPCODE_405): Define.
(PPC_OPERAND_FSL, PPC_OPERAND_FCR, PPC_OPERAND_UDI): Define.
gas/
* config/tc-ppc.c (parse_cpu): Separate handling of -m403/405.
(md_show_usage): Likewise.
opcodes/
* ppc-dis.c (print_insn_powerpc): Disassemble FSL/FCR/UDI fields.
* ppc-opc.c (powerpc_operands): Add Xilinx APU related operands.
(insert_sprg, PPC405): Use PPC_OPCODE_405.
(powerpc_opcodes): Add Xilinx APU related opcodes.
2008-07-30 06:29:22 +00:00
c8187e1509
gas/
...
* config/tc-ppc.c (parse_cpu): Handle -m464.
(md_show_usage): Likewise.
opcodes/
* ppc-dis.c (powerpc_init_dialect): Handle -M464.
(print_ppc_disassembler_options): Likewise.
* ppc-opc.c (PPC464): Define.
(powerpc_opcodes): Add mfdcrux and mtdcrux.
2008-06-25 16:49:03 +00:00
fa452fa683
include/opcode/
...
* ppc.h (ppc_cpu_t): New typedef.
(struct powerpc_opcode <flags>): Use it.
(struct powerpc_operand <insert, extract>): Likewise.
(struct powerpc_macro <flags>): Likewise.
gas/
* config/tc-ppc.c (ppc_cpu): Use ppc_cpu_t typedef.
(ppc_insert_operand): Likewise.
(ppc_machine): Likewise.
* config/tc-ppc.h: #include "opcode/ppc.h"
(struct _ppc_fix_extra <ppc_cpu>): Use ppc_cpu_t typedef.
(ppc_cpu): Update extern decl.
opcodes/
* ppc-dis.c (print_insn_powerpc): Update prototye to use new
ppc_cpu_t typedef.
(struct dis_private): New.
(POWERPC_DIALECT): New define.
(powerpc_dialect): Renamed to...
(powerpc_init_dialect): This. Update to use ppc_cpu_t and
struct dis_private.
(print_insn_big_powerpc): Update for using structure in
info->private_data.
(print_insn_little_powerpc): Likewise.
(operand_value_powerpc): Change type of dialect param to ppc_cpu_t.
(skip_optional_operands): Likewise.
(print_insn_powerpc): Likewise. Remove initialization of dialect.
* ppc-opc.c (extract_bat, extract_bba, extract_bdm, extract_bdp,
extract_bo, extract_boe, extract_fxm, extract_mb6, extract_mbe,
extract_nb, extract_nsi, extract_rbs, extract_sh6, extract_spr,
extract_sprg, extract_tbr insert_bat, insert_bba, insert_bdm,
insert_bdp, insert_bo, insert_boe, insert_fxm, insert_mb6, insert_mbe,
insert_nsi, insert_ral, insert_ram, insert_raq, insert_ras, insert_rbs,
insert_sh6, insert_spr, insert_sprg, insert_tbr): Change the dialect
param to be of type ppc_cpu_t. Update prototype.
2008-06-13 20:16:00 +00:00
19a6653ce8
ppc e500mc support
2008-04-14 11:01:38 +00:00
de866fccd8
* ppc-opc.c (powerpc_opcodes): Order and format.
2008-03-06 23:00:34 +00:00
930bb4cfae
* ppc-opc.c: Support optional L form mtmsr.
2008-01-29 08:24:43 +00:00
548b1dcfcb
* ppc-opc.c (powerpc_opcodes): Remove the dcffix and dcffix. opcodes
...
which are not included in the "Preliminary Decimal Floating-Point
Architecture" document.
2007-11-06 23:14:07 +00:00
91eb7075e3
* ppc-opc.c (powerpc_opcodes): Fix the first two operands of
...
dquaiq. to use the TE and FRT macros.
2007-10-16 02:55:30 +00:00
8dbcd839b1
gas/
...
* config/tc-ppc.c (ppc_setup_opcodes): Verify instructions are sorted
according to major opcode number.
opcodes/
* ppc-opc.c (TE): Correct signedness.
(powerpc_opcodes): Sort psq_st and psq_stu according to major
opcode number.
2007-10-16 02:26:30 +00:00
c3d65c1ced
binutils/
...
* doc/binutils.texi (objdump): Document -Mppcps.
gas/
* config/tc-ppc.c (parse_cpu): Handle "750cl".
(pre_defined_registers): Add "gqr0" to "gqr7", "gqr.0" to "gqr.7".
(md_show_usage): Document -m750cl.
(md_assemble): Handle two delimiters in succession (eg. `),').
* doc/c-ppc.texi (PowerPC-Opts): Document -m750cl.
* testsuite/gas/ppc/ppc.exp: Run ppc70ps dump tests.
* testsuite/gas/ppc/ppc750ps.s: New file.
* testsuite/gas/ppc/ppc750ps.d: Likewise.
include/opcode/
* ppc.h (PPC_OPCODE_PPCPS): New.
opcodes/
* ppc-opc.c (PSW, PSWM, PSQ, PSQM, PSD, MTMSRD_L): New.
(XOPS, XOPS_MASK, XW, XW_MASK): Likewise.
(PPCPS): Likewise.
(powerpc_opcodes): Add all pair singles instructions.
* ppc-dis.c (powerpc_dialect): Handle "ppcps".
(print_ppc_disassembler_options): Document -Mppcps.
2007-08-24 00:56:30 +00:00
33e8d5ac61
* ppc-opc (PPC7450): New.
...
(powerpc_opcodes): Use it in dcba.
2007-07-27 14:24:27 +00:00
9b201bb5e5
Change source files over to GPLv3.
2007-07-05 09:49:03 +00:00
ea192fa395
* ppc-dis.c (operand_value_powerpc, skip_optional_operands): New.
...
(print_insn_powerpc): Use the new operand_value_powerpc and
skip_optional_operands functions to omit or print all optional
operands as a group.
* ppc-opc.c (BFF, W, XFL_L, XWRA_MASK): New.
(XFL_MASK): Delete L and W bits from the mask.
(mtfsfi, mtfsfi.): Replace use of BF with BFF. Relpace use of XRA_MASK
with XWRA_MASK. Use W.
(mtfsf, mtfsf.): Use XFL_L and W.
2007-05-17 00:52:14 +00:00
eb42fac1bb
opcodes/
...
PR 4436
* ppc-opc.c (powerpc_operands): Correct bitm for second entry of MBE.
gas/
PR 4436
* config/tc-ppc.c (ppc_insert_operand): Disable range check if
min > max.
2007-04-30 00:27:57 +00:00
717bbdf181
* ppc-opc.c (powerpc_operands): Delete duplicate entries.
...
(BA_MASK, FXM_MASK, STRM_MASK, VA_MASK, VB_MASK, VC_MASK): Delete.
(VD_MASK, WS_MASK, MTMSRD_L, XRT_L): Delete.
(powerpc_opcodes): Replace uses of MTMSRD_L and XRT_L.
2007-04-21 05:14:21 +00:00
b84bf58af1
include/opcode/
...
* ppc.h (struct powerpc_operand): Replace "bits" with "bitm".
(num_powerpc_operands): Declare.
(PPC_OPERAND_SIGNED et al): Redefine as hex.
(PPC_OPERAND_PLUS1): Define.
opcodes/
* ppc-dis.c (print_insn_powerpc): Adjust for struct powerpc_operand
change.
* ppc-opc.c (powerpc_operands): Replace bit count with bit mask
in all entries. Add PPC_OPERAND_SIGNED to DE entry. Remove
references to following deleted functions.
(insert_bd, extract_bd, insert_dq, extract_dq): Delete.
(insert_ds, extract_ds, insert_de, extract_de): Delete.
(insert_des, extract_des, insert_li, extract_li): Delete.
(insert_nb, insert_rsq, insert_rtq, insert_ev2, extract_ev2): Delete.
(insert_ev4, extract_ev4, insert_ev8, extract_ev8): Delete.
(num_powerpc_operands): New constant.
(XSPRG_MASK): Remove entire SPRG field.
(powerpc_opcodes <bcctre, bcctrel>): Use XLBB_MASK not XLYBB_MASK.
gas/
* messages.c (as_internal_value_out_of_range): Extend to report
errors for values with invalid low bits set.
* config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
fields. Check that operands and opcode fields are disjoint.
(ppc_insert_operand): Check operands using mask rather than bit
count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
insertion code.
(md_apply_fix): Adjust for struct powerpc_operand change.
2007-04-20 12:25:15 +00:00
0bbdef9222
* ppc-opc.c (DCM, DGM, TE, RMC, R, SP, S): Correct shift.
...
(Z2_MASK): Define.
(powerpc_opcodes): Use Z2_MASK in all insns taking RMC operand.
2007-04-20 10:24:37 +00:00
360b160092
* ppc-opc.c (powerpc_opcodes): Add cctpl, cctpm, cctph, db8cyc,
...
db10cyc, db12cyc, db16cyc.
2007-04-19 01:39:31 +00:00
b20ae55eff
* ppc-opc.c (powerpc_opcodes): Recognize three-operand tlbsxe.
2007-04-18 23:57:01 +00:00
ba4e851b3a
* ppc-opc.c (insert_bdm): -Many comment.
...
(valid_bo): Add "extract" param. Accept both powerpc and power4
BO fields when disassembling with -Many.
(insert_bo, extract_bo, insert_boe, extract_boe): Adjust valid_bo call.
2007-02-02 01:24:43 +00:00
a9353e608e
* ppc-opc.c: Restore COM to mfcr wrongly removed 2003-07-04.
2006-11-06 00:46:07 +00:00
702f0fb48f
2006-10-26 Ben Elliston <bje@au.ibm.com>
...
Anton Blanchard <anton@samba.org>
Peter Bergner <bergner@vnet.ibm.com>
* ppc-opc.c (A_L, DCM, DGM, TE, RMC, R, SP, S, SH16, XRT_L, EH,
AFRALFRC_MASK, Z, ZRC, Z_MASK, XLRT_MASK, XEH_MASK): Define.
(POWER6): Define.
(powerpc_opcodes): Extend "lwarx", "ldarx", "dcbf", "fres", "fres.",
"frsqrtes", "frsqrtes." "fre", "fre.", "frsqrte" and "frsqrte.".
Add "doze", "nap", "sleep", "rvwinkle", "dcbfl", "prtyw", "prtyd",
"mfcfar", "cmpb", "lfdpx", "stfdpx", "mtcfar", "mffgpr", "mftgpr",
"lwzcix", "lhzcix", "lbzcix", "ldcix", "lfiwax", "stwcix", "sthcix",
"stbcix", "stdcix", "lfdp", "dadd", "dadd.", "dqua", "dqua.", "dmul",
"dmul.", "drrnd", "drrnd.", "dscli", "dscli.", "dquai", "dquai.",
"dscri", "dscri.", "drintx", "drintx.", "dcmpo", "dtstex", "dtstdc",
"dtstdg", "dtstsf", "drintn", "drintn.", "dctdp", "dctdp.", "dctfix",
"dctfix.", "ddedpd", "ddedpd.", "dxex", "dxex.", "dsub", "dsub.",
"ddiv", "ddiv.", "dcmpu", "drsp", "drsp.", "dcffix", "dcffix.",
"denbcd", "denbcd.", "diex", "diex.", "stfdp", "daddq", "daddq.",
"dquaq", "dquaq.", "fcpsgn", "fcpsgn.", "dmulq", "dmulq.",
"drrndq", "drrndq.", "dscliq", "dscliq.", "dquaiq", "dquaiq.",
"dscriq", "dscriq.", "drintxq", "drintxq.", "dcmpoq", "dtstexq",
"dtstdcq", "dtstdgq", "dtstsfq", "drintnq", "drintnq.",
"dctqpq", "dctqpq.", "dctfixq", "dctfixq.", "ddedpdq", "ddedpdq.",
"dxexq", "dxexq.", "dsubq", "dsubq.", "ddivq", "ddivq.", "dcmpuq",
"drdpq", "drdpq.", "dcffixq", "dcffixq.", "denbcdq", "denbcdq.",
"diexq" and "diexq." opcodes.
2006-10-26 17:37:26 +00:00
ede602d7c8
Add powerpc cell support.
2006-10-24 01:27:29 +00:00
ce7a772b48
* ppc-opc.c (powerpc_opcodes): Add frin,friz,frip,frim. Correct
...
frsqrtes.
2005-11-15 21:33:04 +00:00
36ae0db314
gas/
...
* config/tc-ppc.c (parse_cpu): Add -me300 support.
(md_show_usage): Likewise.
* doc/c-ppc.texi (PowerPC-Opts): Document it.
include/opcode/
* ppc.h (PPC_OPCODE_E300): Define.
opcodes/
* ppc-dis.c (powerpc_dialect): Handle e300.
(print_ppc_disassembler_options): Likewise.
* ppc-opc.c (PPCE300): Define.
(powerpc_opcodes): Mark icbt as available for the e300.
binutils/
* doc/binutils.texi (objdump): Document -M e300.
2005-08-15 15:37:15 +00:00
1ed8e1e4fb
* ppc-dis.c (powerpc_dialect): Handle "-Mpower5".
...
(print_ppc_disassembler_options): Document it.
* ppc-opc.c (SCV_LEV): Define.
(LEV): Allow optional operand.
(POWER5): Define.
(powerpc_opcodes): Extend "sc". Adjust "svc" and "svcl". Add
"hrfid", "popcntb", "fsqrtes", "fsqrtes.", "fre" and "fre.".
2005-05-19 07:00:40 +00:00
f432110413
Update the address and phone number of the FSF
2005-05-07 07:34:31 +00:00
eed0d89a39
* ppc-opc.c (RTO): Define.
...
(powerpc_opcodes <tlbsx, tlbsx., tlbre>): Combine PPC403 and BOOKE
entries to suit PPC440.
2005-04-19 04:50:37 +00:00
da99ee721e
opcodes/
...
* ppc-opc.c (insert_sprg, extract_sprg): New Functions.
(powerpc_operands <SPRG>): Call the above. Bit field is 5 bits.
(SPRG_MASK): Delete.
(XSPRG_MASK): Mask off extra bits now part of sprg field.
(powerpc_opcodes): Asjust mfsprg and mtsprg to suit new mask. Move
mfsprg4..7 after msprg and consolidate.
gas/testsuite
* gas/ppc/booke.s: Add new m[t,f]sprg testcases.
* gas/ppc/booke.d: Likewise.
2005-03-10 12:52:30 +00:00
0e06657a9a
* ppc-opc.c (powerpc_opcodes): Fix encoding of efscfd.
2005-03-07 20:05:44 +00:00
5e8cb02113
* ppc-opc.c (powerpc_opcodes): Add optional 'l' arg to tlbiel.
2005-01-20 06:54:48 +00:00
e612bb4d30
* ppc-opc.c: Revert 2004-09-09 change.
2004-10-09 01:21:03 +00:00
bbac1f2ac7
Replace literal "0"s with NULLs in pointer initializers.
2004-10-07 15:34:08 +00:00
12c64a4e4d
* opcodes/ppc-opc.c (powerpc_opcodes): Add efscfd, efdabs, efdnabs,
...
efdneg, efdadd, efdsub, efdmul, efddiv, efdcmpgt, efdcmplt,
efdcmpeq, efdtstgt, efdtstlt, efdtsteq, efdcfsi, efdcfsid,
efdcfui, efdcfuid, efdcfsf, efdcfuf, efdctsi, efdctsidz, efdctsiz,
efdctui, efdctuidz, efdctuiz, efdctsf, efdctuf, efdctuf, efdcfs.
2004-10-06 23:58:13 +00:00
2a309db040
opcodes/
...
* ppc-opc.c (L): Make this field not optional.
include/opcode/
* ppc.h (PPC_OPERAND_OPTIONAL): Fix comment.
2004-09-09 12:42:37 +00:00
98e6987548
opcodes/
...
* ppc-opc.c (insert_fxm): Handle mfocrf and mtocrf.
(extract_fxm): Don't test dialect.
(XFXFXM_MASK): Include the power4 bit.
(XFXM): Add p4 param.
(powerpc_opcodes): Add mfocrf and mtocrf. Adjust mtcr.
gas/testsuite/
* gas/ppc/power4.d: Update.
2004-06-28 14:08:08 +00:00
d0618d1c97
* ppc-opc.c (BH, XLBH_MASK): Define.
...
(powerpc_opcodes): Allow BH field on bclr, bclrl, bcctr, bcctrl.
2004-06-26 08:32:12 +00:00
a30e9cc4a0
* ppc-opc.c (insert_fxm): Enable two operand mfcr when -many as
...
well as when -mpower4.
2004-05-19 05:11:48 +00:00
a404d431a8
* ppc-opc.c (PPCVEC): Remove PPC_OPCODE_PPC.
2004-05-05 13:43:36 +00:00
520ceea489
* Corrections to previous patch. Amend ChangeLog.
...
* ppc-opc.c (XCMPL): Renmame to XOPL. Update users.
(powerpc_opcodes): Add "dbczl" instruction for PPC970.
2004-04-30 07:14:40 +00:00
f3806e43d9
* ppc-opc.c (powerpc_opcodes): Add "dbczl" instruction for PPC970.
...
[testsuite]
* gas/ppc/power4.s: Add dcbz and dcbzl test cases.
* gas/ppc/power4.d: Update accordingly.
2004-04-30 06:46:53 +00:00
a9c3619ef1
Revert "lsdx", "lsdi", "stsdx", "stsdi", "lmd" and "stmd" insns.
2004-03-16 11:46:15 +00:00
fdd12ef3c6
opcodes/
...
* ppc-dis.c (print_insn_powerpc): Don't print tabs. Handle
PPC_OPERANDS_GPR_0.
* ppc-opc.c (RA0): Define.
(RAQ, RAL, RAM, RAS, RSQ, RTQ, RSO): Use PPC_OPERAND_GPR_0.
(RAOPT): Rename from RAO. Update all uses.
(powerpc_opcodes): Use RA0 as appropriate. Add "lsdx", "lsdi",
"stsdx", "stsdi", "lmd" and "stmd" insns.
include/opcode/
* ppc.h (PPC_OPERAND_GPR_0): Define. Bump other operand defines.
gas/testsuite/
Update gas/ppc/.
ld/testsuite/
Update ld-powerpc/.
2004-03-16 00:58:43 +00:00
2dc111b3c1
* ppc-opc.c (powerpc_opcodes): Add BOOKE versions of mfsprg.
2004-03-15 19:07:39 +00:00
e5d2b64f53
* ppc-opc.c (powerpc_opcodes): Change mask for dcbt and dcbtst.
2004-02-26 03:24:44 +00:00
1f04b05ff5
2004-02-20 Aldy Hernandez <aldyh@redhat.com>
...
* ppc-opc.c (powerpc_opcodes): Move mfmcsrr0 before mfdc_dat.
2004-02-20 05:10:13 +00:00
2f3b870051
2004-02-20 Aldy Hernandez <aldyh@redhat.com>
...
* ppc-opc.c (powerpc_opcodes): Add m*ivor35.
2004-02-20 04:56:34 +00:00
f0b26da617
* ppc-opc.c (powerpc_opcodes): Add mfivor32, mfivor33, mfivor34,
...
mtivor32, mtivor33, mtivor34.
2004-02-20 04:45:37 +00:00
23d59c56c9
2004-02-19 Aldy Hernandez <aldyh@redhat.com>
...
* ppc-opc.c: Add mfmcar.
2004-02-20 00:17:23 +00:00
1f6c9eb084
opcodes:
...
* ppc-opc.c (MO): Make optional.
(RAO, RSO, SHO): New optional forms of RA, RS, SH operands.
(tlbwe): Accept for both PPC403 and BOOKE. Make all operands optional.
gas:
* tc-ppc.c (md_assemble): Rewrite comment about optional operands
to indicate that 'all or none' is also handled. Pluralize a
word in another comment.
gas/testsuite:
* gas/ppc/booke.s: Add two more forms of the mbar instruction
and three forms of the tlbwe instruction.
* gas/ppc/booke.d: Update to match.
2003-12-10 22:12:50 +00:00
e0ab682bec
* alpha-opc.c: Remove ARGSUSED.
...
* i370-opc.c: Likewise.
* ppc-opc.c: Likewise.
2003-12-03 03:15:14 +00:00
661bd698e4
* ppc-dis.c (struct dis_private): New.
...
(powerpc_dialect): Make static. Accept -Many in addition to existing
options. Save dialect in dis_private.
(print_insn_big_powerpc): Retrieve dialect from dis_private.
(print_insn_little_powerpc): Likewise.
(print_insn_powerpc): Call powpc_dialect here. Remove unnecessary
efs/altivec check. Try harder to disassemble if given -Many.
* ppc-opc.c (insert_fxm): Expand comment.
(PPC, PPCCOM, PPC32, PPC64, PPCVEC): Remove PPC_OPCODE_ANY.
(POWER, POWER2, PPCPWR2, POWER32, COM, COM32, M601, PWRCOM): Likewise.
(POWER4): Remove PPCCOM.
(PPCONLY): Don't define. Update all occurrences to PPC.
2003-09-04 01:51:37 +00:00
823bbe9d95
* ppc-opc.c (powerpc_opcodes): Combine identical PPC403/BOOKE entries.
...
Move duplicate mnemonic entries together. Use RS instead of RT on
all mt*.
* ppc-dis.c: Convert to ISO C.
2003-09-02 04:15:29 +00:00
7d5b217e2c
* ppc-opc.c (PPC440): Define.
...
(powerpc_opcodes): Allow mac*, mul*, nmac*, dccci, dcread, iccci,
icread instructions when PPC440. Add dlmzb instruction.
2003-08-19 07:09:10 +00:00
0deb7ac528
* ppc-opc.c (insert_mbe, extract_mbe): Shift 1L instead of 1 up.
2003-07-29 08:29:56 +00:00
8427c42425
* ppc-opc.c: Remove NULL pointer checks. Formatting. Remove
...
extraneous ATTRIBUTE_UNUSED.
* ppc-dis.c (print_insn_powerpc): Always pass a valid address to
operand->extract.
2003-07-07 01:34:04 +00:00
2fbfdc41e7
* ppc-opc.c: Convert to C90, removing unnecessary prototypes and
...
casts. Formatting.
2003-07-04 15:27:25 +00:00
c168870a29
* ppc-opc.c: Remove PARAMS from prototypes.
...
(FXM4): Define.
(insert_fxm): New function, used by both FXM and FXM4.
(extract_fxm): Likewise.
(XFXFXM_MASK): Remove 1 << 20 term.
(powerpc_opcodes): Add Power4 version of "mfcr". Simplify "mtcr" mask.
2003-07-04 13:06:21 +00:00
adadcc0cc9
Add "attn", "lq" and "stq" power4 insns.
2003-06-10 07:44:11 +00:00
Peter Bergner
James Lemke
Andreas Schwab
Alan Modra
Nick Clifton
Jan Beulich
Nathan Froyd
Ben Elliston
Nathan Sidwell
Daniel Jacobowitz
Aldy Hernandez
Zack Weinberg
Kazu Hirata
Jakub Jelinek