The variables used to track insn state should be pushed down into the
private_data structure to avoid pollution across calls.
This also happens to fix the output when hitting comments/invalid insns
which needs to tweak a gas test.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
If the user gives us an unaligned PC, then dump an error as such.
Otherwise if you try to disassemble at an odd address, the output
will look weird (it'll read one byte earlier).
This can be seen in one of the gas tests where data is in the middle
of .text, so move the data to .data like it should be in the first place.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
gas/
* read.c (assign_symbol): Don't force "set" symbols local for PE.
gas/testsuite/
* gas/pe/set.s, * gas/pe/set.d: New test.
* gas/pe/pe.exp: Run it.
At some point the arm-elf output became the same as arm-eabi. Remove
the special handling of arm-elf.
gas/testsuite/ChangeLog:
2014-07-10 Will Newton <will.newton@linaro.org>
* gas/elf/elf.exp: Remove special handling of arm-elf for
section2 test.
* gas/elf/section2.e-armeabi: Rename to...
* gas/elf/section2.e-arm: ...here.
* gas/elf/section2.e-armelf: Remove file.
With this change all gas and most ld tests pass when configured for
arm-linux. It doesn't look like these configurations have been
tested in a long time but this attempts to stem the bit-rot slightly.
gas/testsuite/ChangeLog:
2014-07-10 Will Newton <will.newton@linaro.org>
* gas/arm/bl-local-2.d: Only enable the test on EABI and
NaCl configurations.
* gas/arm/bl-local-v4t.d: Likewise.
* gas/arm/blx-local.d: Likewise.
* gas/arm/branch-reloc.d: Likewise.
ld/testsuite/ChangeLog:
2014-07-10 Will Newton <will.newton@linaro.org>
* ld-arm/arm-elf.exp (armelftests_nonacl): Move Cortex-A8 fix
tests, IFUNC tests and other EABI requiring tests to...
(armeabitests_nonacl): ...here.
* ld-arm/arm-app-abs32.d: Loosen regex for architecture type
to allow test to pass on configurations without an attributes
section.
* ld-arm/arm-app.d: Likewise.
* ld-arm/arm-lib-plt32.d: Likewise.
* ld-arm/arm-lib.d: Likewise.
* ld-arm/arm-static-app.d: Likewise.
* ld-arm/armthumb-lib.d: Likewise.
* ld-arm/cortex-a8-far.d: Likewise.
* ld-arm/farcall-mixed-app.d: Likewise.
* ld-arm/farcall-mixed-lib-v4t.d: Likewise.
* ld-arm/farcall-mixed-lib.d: Likewise.
* ld-arm/mixed-app-v5.d: Likewise.
* ld-arm/mixed-app.d: Likewise.
* ld-arm/mixed-lib.d: Likewise.
* ld-arm/tls-app.d: Likewise.
* ld-arm/tls-descrelax-be32.d: Likewise.
* ld-arm/tls-descrelax.d: Likewise.
* ld-arm/tls-descseq.d: Likewise.
* ld-arm/tls-gdesc-got.d: Likewise.
* ld-arm/tls-gdesc.d: Likewise.
* ld-arm/tls-gdierelax.d: Likewise.
* ld-arm/tls-gdierelax2.d: Likewise.
* ld-arm/tls-gdlerelax.d: Likewise.
* ld-arm/tls-lib-loc.d: Likewise.
* ld-arm/tls-lib.d: Likewise.
* ld-arm/tls-thumb1.d: Likewise.
* config/tc-arm.c (literal_pool): New field "alignment".
(find_or_make_literal_pool): Initialize "alignment" to 2.
(s_ltorg): Align the pool using value of "alignment"
(parse_big_immediate): New parameter "in_exp". Return
parsed expression if "in_exp" is not null.
(parse_address_main): Invoke "parse_big_immediate" for
constant parameter.
(add_to_lit_pool): Add one parameter 'nbytes'.
Split 8 byte entry into two 4 byte entry.
Add padding to align 8 byte entry to 8 byte boundary.
(encode_arm_cp_address): Generate literal pool entry if possible.
(move_or_literal_pool): Generate entry for vldr case.
(enum lit_type): New enum type.
(do_ldst): Use new enum type.
(do_ldstv4): Likewise.
(do_t_ldst): Likewise.
(neon_write_immbits): Support Thumb-2 mode.
* gas/arm/ldconst.s: Add test cases for symbol literal.
* gas/arm/ldconst.d: Likewise.
* gas/arm/vldconst.s: Add test cases for vldr.
* gas/arm/thumb2_vpool.s: Likewise.
* gas/arm/vldconst.d: New pattern for little-endian.
* gas/arm/thumb2_vpool.d: Likewise.
* gas/arm/vldconst_be.d: New pattern for big-endian.
* gas/arm/thumb2_vpool_be.d: Likewise.
Add sp increment and decrement to ARMv8 IT block deprecate
pattern.
gas/
* config/tc-arm.c (depr_it_insns): New check for inc/dec sp.
gas/testsuite/
* gas/arm/armv8-a-it-bad.s: New check for inc/dec sp.
* gas/arm/armv8-a-it-bad.l: Likewise.
a syntax error is detected in an optional operand.
* config/tc-aarch64.c (END_OF_INSN): New macro.
(parse_operands): Handle operand given and be in wrong
format when operand is optional.
* gas/aarch64/diagnostic.s: New test patterns.
* gas/aarch64/diagnostic.l: Likewise.
This is to fix unitialised memory access when printing listings.
Many targets don't initialise parts of insn frags or data frags that
have fixups, relying on md_apply_fix to finalise the frag. Which is
fine normally, but means we need to run write_object_file after
errors, for listings. Otherwise MALLOC_PERTURB_=1 causes errors like:
x86_64-linux +FAIL: i386 mpx-inval-1
x86_64-linux +FAIL: i386 inval-equ-1
x86_64-linux +FAIL: i386 x86-64-mpx-inval-1
Running write_object_file after errors requires some tweaking to the
testsuite, since we then get extra errors reported from md_apply_fix.
gas/
* write.h (subsegs_finish): Delete declaration.
* write.c (subsegs_finish): Make static.
(write_object_file): Call subsegs_finish from here. Don't print
warning and error count here..
* as.c (main): ..do so here instead. Remove dead code for "no
object file generated". Split out count strings to better support
internationalisation. Don't call subsegs_finish. Tidy setting of
"keep_it". Run write_object_file even after errors.
(keep_it): Make static.
* config/obj-elf.c (elf_frob_symbol): Remove assert.
(elf_frob_file_before_adjust): Likewise.
gas/testsuite/
* gas/elf/bad-group.s: Use %function.
* gas/elf/bad-group.err: Expect correct line number. Allow
other errors.
* gas/elf/bad-size.err: Allow other errors. Match expected
error somewhat more rigorously.
* gas/i386/reloc32.l: Allow other errors.
* gas/i386/mpx-inval-1.l: Match applied relocs.
* gas/i386/x86-64-mpx-inval-1.l: Likewise, and nop padding.
* gas/i386/x86-64-mpx-inval-2.l: Match nop padding, and allow
other errors.
* gas/macros/dot.s: Use .balign.
* gas/macros/dot.l: Update alignment output.
* gas/symver/symver6.l: Allow other errors.
MALLOC_PERTURB_=1 results in "FAIL: VAX ELF relocations", due to object
file being emitted with uninitialised fields. Since these fields had
RELA relocs the field value won't be used at final link time, so the
problem is only seen in relocatable object files.
This rewrite of md_apply_fix clears all fields with relocs, whereas
before some fields had non-zero values.
gas/
* config/tc-vax.c (md_apply_fix): Rewrite.
(tc_gen_reloc, vax_cons, vax_cons_fix_new): Style: Use NO_RELOC
define rather than the equivalent BFD_RELOC_NONE.
gas/testsuite/
* gas/vax/elf-rel.d: Update.
gas/
* config/tc-cris.c (md_create_long_jump): Follow "short" jump
with a nop rather than leaving uninitialised.
gas/testsuite/
* gas/cris/rd-bkw4v32.d: Update.
* config/tc-msp430.c (OPTION_WARN_INTR_NOPS): Use y instead of z.
(OPTION_NO_WARN_INTR_NOPS): Use Y instead of Z.
* doc/c-msp430.texi: Update command line option description.
* gas/msp430/bad.d: Use -my not -mz.
gas/
* config/tc-mips.c (file_mips_opts_checked): New static global.
(s_module): New static function.
(file_ase): Remove.
(mips_pseudo_table): Add .module handler.
(mips_set_ase): Add opts argument and use instead of mips_opts.
(md_assemble): Use file_mips_check_options.
(md_parse_option): Update to use file_mips_opts instead of mips_opts.
(mips_set_architecture): Delete function. Moved to...
(mips_after_parse_args): Here. All logic now applies to
file_mips_opts first and then copies the final state to mips_opts.
Move error checking and defaults inference to mips_check_options and
file_mips_check_options.
(mips_check_options): New static function. Common option checking for
command line, .module and .set. Use .module values in error messages
instead of refering to command line options.
(file_mips_check_options): New static function. A wrapper for
mips_check_options with file_mips_opts. Updates BFD arch based on
final options.
(s_mipsset): Split into s_mipsset and parse_code_option. Settings
supported by both .set and .module are moved to parse_code_option.
Warnings and errors are kept in s_mipsset because when
parse_code_option is used with s_module the warnings are deferred
until code is generated. Any setting supporting 'default' value is
kept in s_mipsset as it is not applicable to s_module. Inferred
settings are also kept in s_mipsset as s_module does not infer any
settings. Use mips_check_options.
(parse_code_option): New static function derived from s_mipsset.
(s_module): New static function that implements .module. Allows file
level settings to be changed until code is generated.
(s_cpload, s_cpsetup, s_cplocal): Use file_mips_check_options.
(s_cprestore, s_cpreturn, s_cpadd, mips_address_bytes): Likewise.
(mips_elf_final_processing): Update file_ase to file_mips_opts.ase.
(md_mips_end): Use file_mips_check_options.
* doc/c-mips.texi: Document .module.
gas/testsuite
* gas/mips/mips.exp: Add new tests. Use 64-bit ABI for relax-bc1any.
Fix micromips arch definition to use mips64r2 consistently.
* gas/mips/module-defer-warn1.s: New.
* gas/mips/module-defer-warn1.d: New.
* gas/mips/module-defer-warn2.s: New.
* gas/mips/module-defer-warn2.l: New.
* gas/mips/module-override.d: New.
* gas/mips/module-override.s: New.
* gas/mips/mips-gp32-fp64.l: Update expected output.
* gas/mips/mips-gp64-fp32-pic.l: Update expected output.
* gas/mips/mips-gp64-fp32.l: Update expected output.
* config/tc-msp430.c (CHECK_RELOC_MSP430): Add OP parameter.
Generate BFD_RELOC_MSP430_ABS_HI16 if vshift is 1.
(msp430_srcoperand): Store vshift value in operand.
* msp430.h (struct msp430_operand_s): Add vshift field.
* gas/elf/struct.d: Expect extra output from some toolchains.
* gas/symver/symver0.d: Likewise.
* gas/symver/symver1.d: Likewise.
This patch firstly adds support for mips32r3 mips32r5, mips64r3
and mips64r5. Secondly it adds support for the eretnc instruction.
ChangeLog:
bfd/
* aoutx.h (NAME (aout, machine_type)): Add mips32r3, mips64r3,
mips32r5 and mips64r5.
* archures.c (bfd_architecture): Likewise.
* bfd-in2.h (bfd_architecture): Likewise.
* cpu-mips.c (arch_info_struct): Likewise.
* elfxx-mips.c (mips_set_isa_flags): Likewise.
gas/
* tc-mips.c (ISA_SUPPORTS_MIPS16E): Add mips32r3, mips32r5, mips64r3
and mips64r5.
(ISA_HAS_64BIT_FPRS): Likewise.
(ISA_HAS_ROR): Likewise.
(ISA_HAS_ODD_SINGLE_FPR): Likewise.
(ISA_HAS_MXHC1): Likewise.
(hilo_interlocks): Likewise.
(md_longopts): Likewise.
(ISA_HAS_64BIT_REGS): Add mips64r3 and mips64r5.
(ISA_HAS_DROR): Likewise.
(options): Add OPTION_MIPS32R3, OPTION_MIPS32R5, OPTION_MIPS64R3, and
OPTION_MIPS64R5.
(mips_isa_rev): Add support for mips32r3, mips32r5, mips64r3 and
mips64r5.
(md_parse_option): Likewise.
(s_mipsset): Likewise.
(mips_cpu_info_table): Add entries for mips32r3, mips32r5, mips64r3
and mips64r5. Also change p5600 entry to be mips32r5.
* configure.in: Add support for mips32r3, mips32r5, mips64r3 and
mips64r5.
* configure: Regenerate.
* doc/c-mips.texi: Document the -mips32r3, -mips32r5, -mips64r3 and
-mips64r5 command line options.
* doc/as.texinfo: Likewise.
gas/testsuite/
* gas/mips/mips.exp: Add MIPS32r5 tests. Also add the mips32r3,
mips32r5, mips64r3 and mips64r5 isas to the testsuite.
* gas/mips/r5.s: New test.
* gas/mips/r5.d: Likewise.
include/opcode/
* mips.h (INSN_ISA_MASK): Updated.
(INSN_ISA32R3): New define.
(INSN_ISA32R5): New define.
(INSN_ISA64R3): New define.
(INSN_ISA64R5): New define.
(INSN_ISA64, INSN_ISA64R2, INSN_ISA3_32, INSN_ISA3_32R2, INSN_ISA4_32
INSN_ISA4_32R2, INSN_ISA5_32R2): Renumbered.
(mips_isa_table): Add entries for mips32r3, mips32r5, mips64r3 and
mips64r5.
(INSN_UPTO32R3): New define.
(INSN_UPTO32R5): New define.
(INSN_UPTO64R3): New define.
(INSN_UPTO64R5): New define.
(ISA_MIPS32R3): New define.
(ISA_MIPS32R5): New define.
(ISA_MIPS64R3): New define.
(ISA_MIPS64R5): New define.
(CPU_MIPS32R3): New define.
(CPU_MIPS32R5): New define.
(CPU_MIPS64R3): New define.
(CPU_MIPS64R5): New define.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Add MIPS32r5 eretnc instruction.
(I34): New define.
(I36): New define.
(I66): New define.
(I68): New define.
* mips-dis.c (mips_arch_choices): Add mips32r3, mips32r5, mips64r3 and
mips64r5.
(parse_mips_dis_option): Update MSA and virtualization support to
allow mips64r3 and mips64r5.
This patch updates multiple opcode prefix processing:
1. Always print prefix together with bad opcode.
2. Since the last seen segment register prefix is active, we only print
the active segment register in the memory operand.
3. The 0xf2 and 0xf3 prefixes take precedence over the 0x66 prefix as the
opcode prefix. Also the last of the 0xf2 and 0xf3 prefixes wins.
4. Ignore invalid 0xf2/0xf3 prefixes if they aren't mandatory.
gas/testsuite/
PR binutils/16893
* gas/i386/katmai.d: Expect "gs" as prefix.
* gas/i386/long-1.s: Replace movapd with movss.
* gas/i386/x86-64-long-1.s: Likewise.
* gas/i386/long-1-intel.d: Updated.
* gas/i386/long-1.d: Likewise.
* gas/i386/x86-64-long-1-intel.d: Likewise.
* gas/i386/x86-64-long-1.d: Likewise.
* gas/i386/prefix.s: Add tests for multiple 0x66, 0x67, 0xf0,
0xf2 and 0xf3 prefixes.
* gas/i386/prefix.d: Updated.
opcodes/
PR binutils/16893
* i386-dis.c (twobyte_has_mandatory_prefix): New variable.
(end_codep): Likewise.
(mandatory_prefix): Likewise.
(active_seg_prefix): Likewise.
(ckprefix): Set active_seg_prefix to the active segment register
prefix.
(seg_prefix): Removed.
(get_valid_dis386): Use the last of PREFIX_REPNZ and PREFIX_REPZ
for prefix index. Ignore the index if it is invalid and the
mandatory prefix isn't required.
(print_insn): Set mandatory_prefix if the PREFIX_XXX prefix is
mandatory. Don't set PREFIX_REPZ/PREFIX_REPNZ/PREFIX_LOCK bits
in used_prefixes here. Don't print unused prefixes. Check
active_seg_prefix for the active segment register prefix.
Restore the DFLAG bit in sizeflag if the data size prefix is
unused. Check the unused mandatory PREFIX_XXX prefixes
(append_seg): Only print the segment register which gets used.
(OP_E_memory): Check active_seg_prefix for the segment register
prefix.
(OP_OFF): Likewise.
(OP_OFF64): Likewise.
(OP_DSreg): Set active_seg_prefix to PREFIX_DS if it is unset.
* gas/i386/opcode-intel.d: Undo the last change.
* gas/i386/opcode-suffix.d: Likewise.
* gas/i386/opcode.d: Likewise.
* gas/i386/opcode.s: Likewise.
* gas/i386/prefix.s: Add test for fwait with prefix.
* gas/i386/prefix.d: Updated.
0x9b (fwait) is both an instruction and an opcode prefix. When 0x9b is
treated as an instruction, we need to handle any prefixes before it.
This patch handles it properly.
gas/testsuite/
PR binutils/16891
* gas/i386/opcode.s: Add test for fwait with prefix.
* gas/i386/opcode-intel.d: Updated.
* gas/i386/opcode-suffix.d: Likewise.
* gas/i386/opcode.d: Likewise.
opcodes/
PR binutils/16891
* i386-dis.c (print_insn): Handle prefixes before fwait.
Fix various places where endianness needed to be taken into account
in the gas testsuite for ARM.
gas/testsuite/ChangeLog:
2014-04-23 Will Newton <will.newton@linaro.org>
* gas/arm/backslash-at.d: Fix dump output regexps for
armeb-linux-eabi configuration.
* gas/arm/got_prel.d: Likewise.
* gas/arm/inst-po.d: Likewise.
* gas/arm/unwind.d: Likewise.
If there is a a trailing align statement in a code section we may
output data padding with a data mapping followed by a code alignment
with a code mapping. The literal pool may then be output with a code
mapping symbol which will cause it to be endian swapped in a big-endian
configuration. When outputting a literal pool make sure that a data
mapping symbol is output in all cases.
gas/ChangeLog:
2014-04-23 Will Newton <will.newton@linaro.org>
* config/tc-arm.c (s_ltorg): Call make_mapping_symbol
directly instead of mapping_state.
gas/testsuite/ChangeLog:
2014-04-23 Will Newton <will.newton@linaro.org>
* gas/arm/mapmisc.d: Check literal pool mapping with
a trailing .align statement.
* gas/arm/mapmisc.s: Likewise.
ChangeLog:
binutils/
* doc/binutils.texi: Document the disassemble MIPS XPA instructions
command line option.
gas/
* config/tc-mips.c (options): Add OPTION_XPA and OPTION_NO_XPA.
(md_longopts): Add xpa and no-xpa command line options.
(mips_ases): Add MIPS XPA ASE.
(mips_cpu_info_table): Update p5600 entry to allow the XPA ASE.
* doc/as.texinfo: Document the MIPS XPA command line options.
* doc/c-mips.texi: Document the MIPS XPA command line options,
and assembler directives.
gas/testsuite/
* gas/mips/mips.exp: Add xpa tests.
* gas/mips/xpa.s: New test.
* gas/mips/xpa.d: Likewise.
include/
* opcode/mips.h (ASE_XPA): New define.
opcodes/
* mips-dis.c (mips_arch_choices): Update mips32r2 and mips64r2
to allow the MIPS XPA ASE.
(parse_mips_dis_option): Process the -Mxpa option.
* mips-opc.c (XPA): New define.
(mips_builtin_opcodes): Add MIPS XPA instructions and move the
locations of the ctc0 and cfc0 instructions.
Linking object files produced by partial linking with link-time
relaxation enabled sometimes fails with the following error message:
dangerous relocation: call8: misaligned call target: (.text.unlikely+0x63)
This happens because no basic block with an XTENSA_PROP_ALIGN flag in the
property table is generated for the first basic block, even if the
.align directive is present.
It was believed that the first frag alignment could be derived from the
section alignment, but this was not implemented for the partial linking
case: after partial linking first frag of a section may become not
first, but no additional alignment frag is inserted before it.
Basic block for such frag may be merged with previous basic block into
extended basic block during relaxation pass losing its alignment
restrictions.
Fix this by always recording alignment for the first section frag.
2014-04-22 Max Filippov <jcmvbkbc@gmail.com>
gas/
* config/tc-xtensa.c (xtensa_handle_align): record alignment for the
first section frag.
gas/testsuite/
* gas/xtensa/all.exp: Add test for the first section frag alignment.
* gas/xtensa/first_frag_align.d: First section frag alignment expected
dump.
* gas/xtensa/first_frag_align.s: First section frag alignment test
source.
(enum options): add OPTION_RMW_ISA for -mrmw option.
(struct option md_longopts): Add mrmw option.
(md_show_usage): add -mrmw option description.
(md_parse_option): Update isa details if -mrmw option specified.
* doc/c-avr.texi: Add doc for new option -mrmw.
* gas/avr/avr.exp: Run new tests.
* gas/avr/rmw.d: Add test for additional ISA support.
* gas/avr/rmw.s: Ditto.
(enum options): add OPTION_RMW_ISA for -mrmw option.
(struct option md_longopts): Add mrmw option.
(md_show_usage): add -mrmw option description.
(md_parse_option): Update isa details if -mrmw option specified.
* doc/c-avr.texi: Add doc for new option -mrmw.
* gas/avr/avr.exp: Run new tests.
* gas/avr/rmw.d: Add test for additional ISA support.
* gas/avr/rmw.s: Ditto.
For gathers with indices larger than elements (e. g.)
vpgatherqd ymm6{k1}, ZMMWORD PTR [ebp+zmm7*8-123]
We currently treat memory size as a size of index register, while it is
actually should be size of destination register:
vpgatherqd ymm6{k1}, YMMWORD PTR [ebp+zmm7*8-123]
This patch fixes it.
opcodes/
* i386-opc.tbl: Change memory size for vgatherpf0qps, vgatherpf1qps,
vscatterpf0qps, vscatterpf1qps, vgatherqps, vpgatherqd, vpscatterqd,
vscatterqps.
* i386-tbl.h: Regenerate.
gas/testsuite/
* gas/i386/avx512pf-intel.d: Change memory size for vgatherpf0qps,
vgatherpf1qps, vscatterpf0qps, vscatterpf1qps.
* gas/i386/avx512pf.s: Ditto.
* gas/i386/x86-64-avx512pf-intel.d: Ditto.
* gas/i386/x86-64-avx512pf.s: Ditto.
* gas/i386/avx512f-intel.d: Change memory size for vgatherqps,
vpgatherqd, vpscatterqd, vscatterqps.
* gas/i386/avx512f.s: Ditto.
* gas/i386/x86-64-avx512f-intel.d: Ditto.
* gas/i386/x86-64-avx512f.s: Ditto.
and %hstick_enable to the Sparc assembler.
* config/tc-sparc.c (hpriv_reg_table): Added entries for
%hstick_offset and %hstick_enable.
* doc/c-sparc.texi (Sparc-Regs): Document the %hstick_offset and
%hstick_enable hyperprivileged registers.
* sparc-dis.c (v9_hpriv_reg_names): Names for %hstick_offset and
%hstick_enable added.
* gas/sparc/rdhpr.s: Test rd %hstick_offset and %hstick_enable.
* gas/sparc/rdhpr.d: Likewise.
* gas/sparc/wrhpr.s: Test wr %hstick_offset and %hstick_enable.
* gas/sparc/wrhpr.d: Likewise.
* config/tc-arm.c (codecomposer_syntax): New flag that states whether the
CCS syntax compatibility mode is on or off.
(asmfunc_states): New enum to represent the asmfunc directive state.
(asmfunc_state): New variable holding the asmfunc directive state.
(comment_chars): Rename to arm_comment_chars.
(line_separator_chars): Rename to arm_line_separator_chars.
(s_ccs_ref): New function that handles the .ref directive.
(asmfunc_debug): New function.
(s_ccs_asmfunc): New function that handles the .asmfunc directive.
(s_ccs_endasmfunc): New function that handles the .endasmfunc directive.
(s_ccs_def): New function that handles the .def directive.
(tc_start_label_without_colon): New function.
(md_pseudo_table): Added new CCS directives.
(arm_ccs_mode): New function that handles the -mccs command line option.
(arm_long_opts): Added new -mccs command line option.
* config/tc-arm.h (LABELS_WITHOUT_COLONS): New macro.
(TC_START_LABEL_WITHOUT_COLON): New macro.
(tc_start_label_without_colon): Added extern function declaration.
(tc_comment_chars): Define.
(tc_line_separator_chars): Define.
* app.c (do_scrub_begin): Use tc_line_separator_chars, if defined.
* read.c (read_begin): Likewise.
* doc/as.texinfo: Add documentation for the -mccs command line
option.
* doc/c-arm.texi: Likewise.
* doc/internals.texi: Document tc_line_separator_chars.
* NEWS: Mention the new feature.
* gas/arm/ccs.s: New test case.
* gas/arm/ccs.d: New expected disassembly.
* rx-decode.opc (bwl): Allow for bogus instructions with a size
field of 3.
(sbwl, ubwl, SCALE): Likewise.
* rx-decode.c: Regenerate.
* gas/rx/mov.d: Update expected disassembly.
bfd/
* peicode.h (pe_ILF_object_p): Adjust, as the version number
has been read.
(pe_bfd_object_p): Also read version number to detect ILF.
* pe-x86_64.c (COFF_WITH_PE_BIGOBJ): Define.
(x86_64pe_bigobj_vec): Define
* coffcode.h (bfd_coff_backend_data): Add _bfd_coff_max_nscns field.
(bfd_coff_max_nscns): New macro.
(coff_compute_section_file_positions): Use unsigned int for
target_index. Compare with bfd_coff_max_nscns.
(bfd_coff_std_swap_table, ticoff0_swap_table, ticoff1_swap_table):
Set a value for _bfd_coff_max_nscns.
(header_bigobj_classid): New constant.
(coff_bigobj_swap_filehdr_in, coff_bigobj_swap_filehdr_out)
(coff_bigobj_swap_sym_in, coff_bigobj_swap_sym_out)
(coff_bigobj_swap_aux_in, coff_bigobj_swap_aux_out): New
functions.
(bigobj_swap_table): New table.
* libcoff.h: Regenerate.
* coff-sh.c (bfd_coff_small_swap_table): Likewise.
* coff-alpha.c (alpha_ecoff_backend_data): Add value for
_bfd_coff_max_nscns.
* coff-mips.c (mips_ecoff_backend_data): Likewise.
* coff-rs6000.c (bfd_xcoff_backend_data)
(bfd_pmac_xcoff_backend_data): Likewise.
* coff64-rs6000.c (bfd_xcoff_backend_data)
(bfd_xcoff_aix5_backend_data): Likewise.
* targets.c (x86_64pe_bigobj_vec): Declare.
* configure.in (x86_64pe_bigobj_vec): New vector.
* configure: Regenerate.
* config.bfd: Add bigobj object format for Windows targets.
gas/
* config/tc-i386.c (use_big_obj): Declare.
(OPTION_MBIG_OBJ): Define.
(md_longopts): Add -mbig-obj option.
(md_parse_option): Handle it.
(md_show_usage): Display help for this option.
(i386_target_format): Use bigobj for x86-64 if -mbig-obj.
* doc/c-i386.texi: Document the option.
gas/testsuite/
* gas/pe/big-obj.d, gas/pe/big-obj.s: Add test.
* gas/pe/pe.exp: Add test.
include/coff/
* pe.h (struct external_ANON_OBJECT_HEADER_BIGOBJ): Declare.
(FILHSZ_BIGOBJ): Define.
(struct external_SYMBOL_EX): Declare.
(SYMENT_BIGOBJ, SYMESZ_BIGOBJ): Define.
(union external_AUX_SYMBOL_EX): Declare.
(AUXENT_BIGOBJ, AUXESZ_BIGOBJ): Define.
* internal.h (struct internal_filehdr): Change type
of f_nscns.
that if multiple bignum values are encountered only the most recent is valid.
If such expressions are cached, eg to be emitted into a literal pool later on
in the assembly, then only one expression - the last - will be correct. This
patch fixes the problem for the AArch64 target by caching each bignum value
locally.
PR gas/16688
* config/tc-aarch64.c (literal_expression): New structure.
(literal_pool): Replace exp array with literal_expression array.
(add_to_lit_pool): When adding a bignum cache the big value.
(s_ltorg): When emitting a bignum initialise the global bignum
array from the cached value.
* gas/aarch64/litpool.s: New test case.
* gas/aarch64/litpool.d: Expected disassembly.
generate warning messages about an instruction that changes the interrupt
state not being followed by a NOP instruction.
* config/msp430/msp430.c: Replace known mcu array with known
msp430 ISA mcu name array.
Accept any name for -mmcu option.
Add -mz option to warn about missing NOP following an interrupt
status change.
(check_for_nop): New.
(msp430_operands): Emit a warning, if requested, when an interrupt
changing instruction is not followed by a NOP.
* doc/c-msp430.c: Document -mz option.
* gas/msp430/bad.d: Add -mz option.
* gas/msp430/bad.s: Add more cases where warnings should be
generated.
* gas/msp430/bad.l: Add expected warning messages.
SHF_INFO_LINK bit set, which shows up in readelf section dumps. This
has broken a couple of IA64 testcases in the gas testsuite, which are
fixed by this patch.
PR binutils/16317
* gas/ia64/group-2.d: Expect I attribute with RELA sections.
* gas/ia64/xdata.d: Likewise.
The direct rounding floating-point VCVT instructions introduced in
ARMv8 encode the s32.f64 variant incorrectly. The op bit should be
set to 1 for all signed conversions.
gas/ChangeLog:
2014-01-17 Will Newton <will.newton@linaro.org>
* config/tc-arm.c (do_vfp_nsyn_cvt_fpv8): Set OP to 1
for the s32.f64 flavours of VCVT.
gas/testsuite/ChangeLog:
2014-01-17 Will Newton <will.newton@linaro.org>
* gas/arm/armv8-a+fp.d: Correct encoding of vcvta.s32.f64.
Add two more as test files for user special and system register.
Fix typo.
2013-12-17 Kuan-Lin Chen <kuanlinchentw@gmail.com>
* gas/nds32/nds32.exp: Add system and user special register tests.
* gas/nds32/sys-reg.s: New test.
* gas/nds32/sys-reg.d: Likewise.
* gas/nds32/usr-spe-reg.s: Likewise.
* gas/nds32/usr-spe-reg.d: Likewise.
* gas/nds32/alu-2.d: Delete the new blank line at EOF.
* gas/nds32/br-1.d: Likewise.
* gas/nds32/br-2.d: Likewise.
* gas/nds32/ji-jr.d: Likewise.
* gas/nds32/lsi.d: Likewise.
* nds32-dis.c (sr_map): Add system register table for disassembling.
(usr_map): Fix typo.
* nds32-asm.c (keyword_sr): Add embedded debug registers.
2013-12-16 Andrew Bennett <andrew.bennett@imgtec.com>
gas/testsuite/gas/mips/
* mips.exp: Add CP1 register name tests.
* cp1-names-mips32.d: New test.
* cp1-names-mips32r2.d: New test.
* cp1-names-mips64.d: New test.
* cp1-names-mips64r2.d: New test.
* cp1-names-numeric.d: New test.
* cp1-names-r3000.d: New test.
* cp1-names-r4000.d: New test.
* cp1-names-sb1.d: New test.
* cp1-names.s: New test.
* micromips-insn32.d: Add the correct symbolic names for the CP1
registers.
* micromips-noinsn32.d: Likewise.
* micromips-trap.d: Likewise.
* micromips.d: Likewise.
opcodes/
* mips-dis.c: Add mips_cp1_names pointer.
(mips_cp1_names_numeric): New array.
(mips_cp1_names_mips3264): New array.
(mips_arch_choice): Add cp1_names.
(mips_arch_choices): Add relevant cp1 register name array to each of
the elements.
(set_default_mips_dis_options): Add support for setting up the
mips_cp1_names pointer.
(parse_mips_dis_option): Add support for the cp1-names command line
variable. Also setup the mips_cp1_names pointer.
(print_reg): Print out name of the cp1 register.
The element index range for the following MIPS MSA instructions: sldi, splati,
copy_s, copy_u, insert and insve is 1 bit too large. This patch fixes this issue.
ChangeLog:
gas/testsuite/gas/mips/
* msa.s: Reduced maximum element index range for sldi, splati,
copy_s, copy_u, insert and insve instructions.
* msa64.s: Likewise.
* micromips@msa.d: Likewise.
* micromips@msa64.d: Likewise.
* msa.d: Likewise.
* msa64.d: Likewise.
include/opcode/
* mips.h: Updated description of +o, +u, +v and +w for MIPS and
microMIPS.
opcodes/
* micromips-opc.c (decode_micromips_operand): Reduced range of +o, +u,
+v and +w.
(micromips_opcodes): Reduced element index range for sldi, splati,
copy_s, copy_u, insert and insve instructions.
* opcodes/mips-opc.c (decode_mips_operand): Reduced range of +o, +u,
+v and +w.
(mips_builtin_opcodes): Reduced element index range for sldi, splati,
copy_s, copy_u, insert and insve instructions.
These files are source files and have no business being +x. We couldn't
easily fix it in CVS (you need login+write access to the raw rcs files),
but we can fix this w/git.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2013-11-27 Matthew Fortune <matthew.fortune@imgtec.com>
* binutils-all/objcopy.exp: Consider mips-mti-elf the same as
mips-sde-elf
* binutils-all/readelf.exp: Likewise
gas/testsuite/
2013-11-27 Matthew Fortune <matthew.fortune@imgtec.com>
* gas/mips/mips.exp: Consider mips-mti-elf the same as mips-sde-elf
ld/testsuite/
2013-11-27 Matthew Fortune <matthew.fortune@imgtec.com>
* ld-mips-elf/mips-elf.exp: Consider mips-mti-elf the same as
mips-sde-elf
gas/
* config/tc-arm.c (arm_archs): New armv7ve architecture option.
(arm_cpus): Replace ARM_ARCH_V7A_IDIV_MP_SEC_VIRT with
ARM_ARCH_V7VE for cortex-a7, cortex-a12 and cortex-a15.
(cpu_arch_ver): Likewise.
* doc/c-arm.texi: Document armv7ve.
gas/testsuite/
* gas/arm/attr-march-armv7ve.d: New test case for armv7ve.
include/opcode/
* arm.h (ARM_AEXT_V7VE): New define.
(ARM_ARCH_V7VE): New define.
(ARM_ARCH_V7A_IDIV_MP_SEC_VIRT): Removed.
* config/tc-aarch64.c (set_other_error): New function.
(parse_sys_reg): Add new parameter 'sys_reg' and if non-NULL set
the variable to which it points with 'o'.
(parse_operands): Update; check for write to read-only system
registers or read from write-only ones.
gas/testsuite/
* gas/aarch64/diagnostic.s: Add tests.
* gas/aarch64/diagnostic.l: Update.
* gas/aarch64/tracereg-illegal.d: New file.
* gas/aarch64/tracereg-illegal.l: Ditto.
* gas/aarch64/tracereg-illegal.s: Ditto.
* gas/aarch64/tracereg.d: Ditto.
* gas/aarch64/tracereg.s: Ditto.
include/opcode
* aarch64.h (aarch64_sys_reg_readonly_p): New declaration.
(aarch64_sys_reg_writeonly_p): Ditto.
opcodes/
* aarch64-opc.c (CPENT): New define.
(F_READONLY, F_WRITEONLY): Likewise.
(aarch64_sys_regs): Add trace unit registers.
(aarch64_sys_reg_readonly_p): New function.
(aarch64_sys_reg_writeonly_p): Ditto.
* config/tc-aarch64.c (parse_sys_reg): Update to use aarch64_sys_reg;
call aarch64_sys_reg_deprecated_p and warn about the deprecated
system registers.
gas/testsuite/
* gas/aarch64/deprecated.d: New file.
* gas/aarch64/deprecated.l: New file.
* gas/aarch64/deprecated.s: New file.
* gas/aarch64/sysreg-1.s: Add tests.
* gas/aarch64/sysreg-1.d: Add tests.
include/opcode/
* aarch64.h (aarch64_sys_reg): New typedef.
(aarch64_sys_regs): Change to define with the new type.
(aarch64_sys_reg_deprecated_p): Declare.
opcodes/
* aarch64-opc.c (F_DEPRECATED): New macro.
(aarch64_sys_regs): Update; flag "spsr_svc" and "spsr_hyp" with
F_DEPRECATED.
(aarch64_print_operand): Call aarch64_sys_reg_deprecated_p on
AARCH64_OPND_SYSREG.
Parsing a vector mov instruction currently leads to a phantom undefined
symbol being added to the symbol table. e.g.:
.text
mov x0, v0.D[0]
Produces an undefined symbol called "v0.D".
gas/ChangeLog:
2013-11-05 Will Newton <will.newton@linaro.org>
PR gas/16103
* config/tc-aarch64.c (parse_operands): Avoid trying to
parse a vector register as an immediate.
gas/testsuite/ChangeLog:
2013-11-05 Will Newton <will.newton@linaro.org>
* gas/aarch64/advsimd-mov-bad.d: New file.
* gas/aarch64/advsimd-mov-bad.s: Likewise.
Maciej W. Rozycki
Kyrylo Tkachov
Mike Frysinger
H.J. Lu
Ilya Tocar
Alan Modra
Matthew Fortune
Will Newton
Jiong Wang
Hans-Peter Nilsson
Nick Clifton
Andrew Bennett
Sandra Loosemore
Max Filippov
Christian Svensson
Denis Chertykov
David Weatherford
Richard Sandiford
Jose E. Marchesi
Daniel Gutson
Yufeng Zhang
Tristan Gingold
Michael Zolotukhin
Kuan-Lin Chen
Catherine Moore