* gas/arm/arch4t-eabi.d: Restore previous expected dissambly of
instructions using Immediate Offset addressing with an offset of
zero.
* gas/arm/arch4t.d: Likewise.
* gas/arm/arm7t.d: Likewise.
* gas/arm/xscale.d: Likewise.
* gas/arm/wince-inst.d: Remove 'p' suffix from cmp, cmn, teq and
tst instructions.
PR binutils/10924
* arm-dis.c (print_insn_arm): Do not print an offset of zero when
decoding Immediaate Offset addressing.
PR binutils/10924
* gas/arm/arch4t-eabi.d: Update expected disassembly.
* gas/arm/arch4t.d: Likewise.
* gas/arm/archv6t2.d: Likewise.
* gas/arm/arm7t.d: Likewise.
* gas/arm/inst.d: Likewise.
* gas/arm/xscale.d: Likewise.
PR binutils/10924
* arm-dis.c (arm_opcodes): Add patterns to match undefined LDRB
instruction variants. Add pattern for MRS variant that was being
confused with CMP.
(arm_decode_shift): Place error message in a comment.
(print_insn_arm): Note that writing back to the PC is
unpredictable.
Only print 'p' variants of cmp/cmn/teq/tst instructions if
decoding for pre-V6 architectures.
* arm-dis.c (UNPREDICTABLE_INSTRUCTION): New macro.
(print_insn_arm): Extend %s format control code to check for
unpredictable addressing modes. Add support for %S format control
code which suppresses this check.
(W_BIT, I_BIT, U_BIT, P_BIT): New macros.
(WRITEBACK_BIT_SET, IMMEDIATE_BIT_SET, NEGATIVE_BIT_SET,
PRE_BIT_SET): New macros.
(print_insn_coprocessor): Use the new macros instead of magic
constants.
(print_arm_address): Likewise.
(pirnt_insn_arm): Likewise.
(print_insn_thumb32): Likewise.
* opcodes/i386-dis.c (reg_table): Add XOP_8F_TABLE (XOP_09) to
reg_table[REG_8F][1]: for XOP instructions, ModRM.reg first points to
B.mm in the RXB.mmmmm byte, and so when B is set, we still should use
the xop_table.
(get_valid_dis386): Removed unused condition (from cut/n/paste) for
XOP instructions.
* gas/testsuite/gas/i386/x86-64-lwp.s: Updated to also contain
patterns with r[8-15] registers.
* gas/testsuite/gas/i386/x86-64-lwp.d: Same.
2009-10-29 Sebastian Pop <sebastian.pop@amd.com>
* config/tc-i386.c (build_modrm_byte): Do not swap REG and
NDS operands for FMA4.
gas/testsuite/
2009-10-29 Sebastian Pop <sebastian.pop@amd.com>
* gas/i386/fma4.d: Updated patterns.
* gas/i386/x86-64-fma4.d: Same.
opcodes/
2009-10-29 Sebastian Pop <sebastian.pop@amd.com>
* i386-dis.c (OP_VEX_FMA): Removed.
(VexFMA): Removed.
(Vex128FMA): Removed.
(prefix_table): First source operand of FMA4 insns is decoded
with Vex not with VexFMA.
(OP_EX_VexW): Second source operand is decoded with get_vex_imm8
when vex.w is set. Third source operand is decoded with
get_vex_imm8 when vex.w is cleared.
(OP_VEX_FMA): Removed.
(FR30_DEPS, FRV_DEPS, IQ2000_DEPS): Move so all cgen *_DEPS are
sorted alphabetically.
(stamp-fr30, stamp-frv, stamp-iq2000, stamp-xc16x): Move so all cgen
stamp-* rules are sorted alphabetically.
* Makefile.in: Regenerate.
(orig_filename): Constify.
(dump_lines): Fix line number directive.
(main): Set orig_filename to basename of input file. Use
xstrerror.
* Makefile.am (rx-dis.lo): Remove explicit dependencies.
($(srcdir)/rx-decode.c): Use @MAINT@. Use $(EXEEXT_FOR_BUILD)
instead of $(EXEEXT).
(opc2c$(EXEEXT_FOR_BUILD)): Renamed from opc2c$(EXEEXT) and use
$(LINK_FOR_BUILD). Link with libiberty.
(MOSTLYCLEANFILES): Add opc2c$(EXEEXT_FOR_BUILD).
(MAINTAINERCLEANFILES): Add $(srcdir)/rx-decode.c.
* Makefile.in: Regenerated.
* rx-decode.c: Regenerated.
(opt): Remove extra xorb entry.
(func): Use id field as fallback.
(sub): Return new string, caller changed.
(internal): Allocate end marker. Assign unique id before sorting.
(gas): Likewise. Fix loop end condition.
* z8k-opc.h: Regenerate.
(record_thumb_to_arm_glue, bfd_arm_process_before_allocation):
Change member name class to symbol_class.
* bfd/coff-i960.c (coff_i960_relocate_section) Rename variable
class to class_val. Change member name class to symbol_class.
* bfd/coff-rs6000.c (_bfd_xcoff_swap_aux_in)
(_bfd_xcoff_swap_aux_out): Rename arguments class to in_class.
* bfd/coff-stgo32.c (adjust_aux_in_post)
(adjust_aux_out_pre, adjust_aux_out_post): Rename arguments class
to in_class.
* bfd/coff64-rs6000.c (_bfd_xcoff64_swap_aux_in)
(_bfd_xcoff64_swap_aux_out): Rename arguments class to in_class.
* bfd/coffcode.h (coff_pointerize_aux_hook): Rename variable class
to n_sclass.
* bfd/coffgen.c (coff_write_symbol, coff_pointerize_aux): Rename
variables named class to n_sclass. (coff_write_symbols): Rename
variable class to sym_class. (bfd_coff_set_symbol_class): Rename
argument class to symbol_class.
* bfd/cofflink.c (_bfd_coff_link_hash_newfunc)
(coff_link_add_symbols, _bfd_coff_link_input_bfd)
(_bfd_coff_write_global_sym, _bfd_coff_generic_relocate_section):
Update code to use renamed members.
* bfd/coffswap.h (coff_swap_aux_in, coff_swap_aux_out): Rename
argument class to in_class.
* bfd/libcoff-in.h (struct coff_link_hash_entry, struct
coff_debug_merge_type) Renamed members class to symbol_class and
type_class.
* bfd/libcoff.h Regenerated.
* bfd/peXXigen.c: (_bfd_XXi_swap_aux_in, _bfd_XXi_swap_aux_out):
Rename argument class to in_class.
* bfd/pef.c (bfd_pef_parse_imported_symbol): Update code to use
renamed members.
* bfd/pef.h (struct bfd_pef_imported_symbol): Changed name of
member class to symbol_class.
* binutils/ieee.c (ieee_read_cxx_misc, ieee_read_cxx_class)
(ieee_read_reference): Rename variables named class to cxxclass.
* gas/config/tc-arc.c (struct syntax_classes): Rename member class
to s_class. (arc_extinst): Rename variable class to
s_class. Update code to use renamed members.
* gas/config/tc-mips.c (insn_uses_reg): Rename argument class to
regclass.
* gas/config/tc-ppc.c (ppc_csect, ppc_change_csect, ppc_function)
(ppc_tc, ppc_is_toc_sym, ppc_symbol_new_hook, ppc_frob_label)
(ppc_fix_adjustable, md_apply_fix): Update code to use renamed
members.
* gas/config/tc-ppc.h (struct ppc_tc_sy): Change name of member
from class to symbol_class. (OBJ_COPY_SYMBOL_ATTRIBUTES): Update
code to use renamed members.
* gas/config/tc-score.c (s3_adjust_paritybit): Rename argument
class to i_class.
* gas/config/tc-score7.c (s7_adjust_paritybit): Rename argument
class to i_class.
* gprof/corefile.c (core_create_function_syms): Rename variable
class to cxxclass.
* include/coff/ti.h (GET_LNSZ_SIZE, PUT_LNSZ_SIZE): Updated name
of class variable to in_class to match changes in function that
use this macro.
* include/opcode/ia64.h (struct ia64_operand): Renamed member
class to op_class
* ld/emultempl/elf32.em (gld${EMULATION_NAME}_load_symbols)
(gld${EMULATION_NAME}_try_needed): Rename variable class to
link_class
* opcodes/ia64-dis.c (print_insn_ia64): Update code to use renamed
member.
* opcodes/m88k-dis.c (m88kdis): Rename variable class to in_class.
* opcodes/tic80-opc.c (tic80_symbol_to_value)
(tic80_value_to_symbol): Rename argument class to symbol_class.
* config/bfin-parse.y (asm_1): Implement HLT instruction.
Fix comments for DBGA, DBGAH and DBGAL.
* config/tc-bfin.c (bfin_gen_pseudodbg_assert): Change according
to the new encoding of DBGA, DBGAH, and DBGAL.
include/
* opcode/bfin.h (PseudoDbg_Assert): Add bits_grp and mask_grp.
(PseudoDbg_Assert_grp_bits, PseudoDbg_Assert_grp_mask): Define.
(PseudoDbg_Assert_dbgop_bits, PseudoDbg_Assert_dbgop_mask,
PseudoDbg_Assert_dontcare_bits, PseudoDbg_Assert_dontcare_mask):
Adjust accordingly.
(init_PseudoDbg_Assert): Add PseudoDbg_Assert_grp_bits and
PseudoDbg_Assert_grp_mask.
opcodes/
* bfin-dis.c (decode_pseudodbg_assert_0): Change according
to the new encoding of DBGA, DBGAH, and DBGAL.
(_print_insn_bfin): Likewise.
* makefile.vms: Ported to Itanium VMS. Remove useless targets and
dependencies. Remove unused FORMAT variable.
* configure.com: New file to create build.com DCL script for
Itanium VMS or Alpha VMS.
keyword in c++.
* bfd/aoutx.h (NAME (aout, make_empty_symbol)): Rename variable
new to new_symbol.
* bfd/coffgen.c (coff_make_empty_symbol)
(coff_bfd_make_debug_symbol): Rename variable new to new_symbol.
* bfd/cpu-ia64-opc.c (ext_reg, ins_imms_scaled): Rename variable
new to new_insn.
* bfd/doc/chew.c (newentry, add_intrinsic): Rename variable new to
new_d.
* bfd/ecoff.c (_bfd_ecoff_make_empty_symbol): Rename variable new
to new_symbol.
* bfd/elf32-m68k.c (elf_m68k_get_got_entry_type): Rename argument
new to new_reloc.
* bfd/hash.c (bfd_hash_lookup): Rename variable new to new_string.
* bfd/ieee.c (ieee_make_empty_symbol): Rename variable new to
new_symbol.
* bfd/linker.c (bfd_new_link_order): Rename variable new to
new_lo.
* bfd/mach-o.c (bfd_mach_o_sizeof_headers): Rename variable new to
symbol.
* bfd/oasys.c (oasys_make_empty_symbol): Rename variable new to
new_symbol_type.
* bfd/pdp11.c (NAME (aout, make_empty_symbol)): Rename variable
new to new_symbol_type.
* bfd/plugin.c (bfd_plugin_make_empty_symbol): Rename variable new
to new_symbol.
* bfd/rs6000-core.c (CoreHdr, VmInfo): Rename union member new to
new_dump.
(read_hdr, rs6000coff_core_p)
(rs6000coff_core_file_matches_executable_p)
(rs6000coff_core_file_failing_command)
(rs6000coff_core_file_failing_signal): Updated function to use new
union member name.
* bfd/som.c (som_make_empty_symbol): Rename variable new to
new_symbol_type.
* bfd/syms.c (_bfd_generic_make_empty_symbol): Rename variable new
to new_symbol.
* bfd/tekhex.c (first_phase, tekhex_make_empty_symbol): Rename
variable new to new_symbol.
* binutils/nlmconv.c (main): Rename variable new to new_name.
* gas/config/tc-arm.c (insert_reg_alias): Rename variable new to
new_reg.
* gas/config/tc-dlx.c (parse_operand): Rename variable new to
new_pos.
* gas/config/tc-ia64.c (ia64_gen_real_reloc_type): Rename variable
new to newr.
* gas/config/tc-mcore.c (parse_exp, parse_imm): Rename variable
new to new_pointer.
* gas/config/tc-microblaze.c (parse_exp, parse_imm, check_got):
Change name from new to new_pointer.
* gas/config/tc-or32.c (parse_operand): Rename variable new to
new_pointer.
* gas/config/tc-pdp11.c (md_assemble): Rename variable new to
new_pointer.
* gas/config/tc-pj.c (alias): Change argument new to new_name.
* gas/config/tc-score.c (s3_build_score_ops_hsh): Rename variable
new to new_opcode. (s3_build_dependency_insn_hsh) Rename variable
new to new_i2n. (s3_convert): Rename variables old and new to
r_old and r_new.
* gas/config/tc-score7.c (s7_build_score_ops_hsh): Rename variable
new to new_opcode. (s7_build_dependency_insn_hsh): Rename variable
new to new_i2d. (s7_b32_relax_to_b16, s7_convert_frag): Rename
variables old and new to r_old and r_new.
* gas/config/tc-sh.c (parse_exp): Rename variable new to
new_pointer.
* gas/config/tc-sh64.c (shmedia_parse_exp): Rename variable new to
new_pointer.
* gas/config/tc-tic4x.c (tic4x_operand_parse): Rename variable new
to new_pointer.
* gas/config/tc-z8k.c (parse_exp): Rename variable new to
new_pointer.
* gas/listing.c (listing_newline): Rename variable new to new_i.
* ld/ldexp.c (exp_intop, exp_bigintop, exp_relop, exp_binop)
(exp_trinop, exp_unop, exp_nameop, exp_assop): Rename variable new
to new_e.
* ld/ldfile.c (ldfile_add_library_path): Rename variable new to
new_dirs. (ldfile_add_arch): Rename variable new to new_arch.
* ld/ldlang.c (new_statement, lang_final, lang_add_wild)
(lang_target, lang_add_fill, lang_add_data, lang_add_assignment)
(lang_add_insert): Rename variable new to new_stmt. (new_afile):
Added missing cast. (lang_memory_region_lookup): Rename variable
new to new_region. (init_os): Rename variable new to
new_userdata. (lang_add_section): Rename variable new to
new_section. (ldlang_add_undef): Rename variable new to
new_undef. (realsymbol): Rename variable new to new_name.
* opcodes/z8kgen.c (internal, gas): Rename variable new to new_op.
Updated sources to avoid using the identifier name "template",
which is a keyword in c++.
* bfd/elf32-arm.c (struct stub_def): Rename member template to
template_sequence. (arm_build_one_stub,
find_stub_size_and_template, arm_size_one_stub, arm_map_one_stub):
Rename variable template to template_sequence.
* bfd/elfxx-ia64.c (elfNN_ia64_relax_br, elfNN_ia64_relax_brl):
Rename variable template to template_val.
* gas/config/tc-arm.c (struct asm_cond, struct asm_psr, struct
asm_barrier_opt): Change member template to
template_name. (md_begin): Update code to reflect new member
names.
* gas/config/tc-i386.c (struct templates, struct _i386_insn)
(match_template, cpu_flags_match, match_reg_size, match_mem_size)
(operand_size_match, md_begin, i386_print_statistics, pi)
(build_vex_prefix, md_assemble, parse_insn, optimize_imm)
(optimize_disp): Updated code to use new names. (parse_insn):
Added casts.
* gas/config/tc-ia64.c (dot_template, emit_one_bundle): Updated
code to use new names.
* gas/config/tc-score.c (struct s3_asm_opcode): Renamed member
template to template_name. (s3_parse_16_32_inst, s3_parse_48_inst,
s3_do_macro_ldst_label, s3_build_score_ops_hsh): Update code to
use new names.
* gas/config/tc-score7.c (struct s7_asm_opcode): Renamed member
template to template_name. (s7_parse_16_32_inst,
s7_do_macro_ldst_label, s7_build_score_ops_hsh): Update code to
use new names.
* gas/config/tc-tic30.c (md_begin, struct tic30_insn)
(md_assemble): Update code to use new names.
* gas/config/tc-tic54x.c (struct _tic54x_insn, md_begin)
(optimize_insn, tic54x_parse_insn, next_line_shows_parallel):
Update code to use new names.
* include/opcode/tic30.h (template): Rename type template to
insn_template. Updated code to use new name.
* include/opcode/tic54x.h (template): Rename type template to
insn_template.
* opcodes/cris-dis.c (bytes_to_skip): Update code to use new name.
* opcodes/i386-dis.c (putop): Update code to use new name.
* opcodes/i386-gen.c (process_i386_opcodes): Update code to use
new name.
* opcodes/i386-opc.h (struct template): Rename struct template to
insn_template. Update code accordingly.
* opcodes/i386-tbl.h (i386_optab): Update type to use new name.
* opcodes/ia64-dis.c (print_insn_ia64): Rename variable template
to template_val.
* opcodes/tic30-dis.c (struct instruction, get_tic30_instruction):
Update code to use new name.
* opcodes/tic54x-dis.c (has_lkaddr, get_insn_size)
(print_parallel_instruction, print_insn_tic54x, tic54x_get_insn):
Update code to use new name.
* opcodes/tic54x-opc.c (tic54x_unknown_opcode, tic54x_optab):
Update type to new name.
opcodes/:
* Makefile.am (TARGET_LIBOPCODES_CFILES): New variable, taken
from $(CFILES), sorted, with dis-buf.c, dis-init.c, disassemble.c,
i386-gen.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c, ia64-opc-i.c,
ia64-opc-m.c, ia64-opc-d.c, ia64-gen.c, ia64-asmtab.c removed, and
msp430-dis.c added.
(LIBOPCODES_CFILES): New variable, adding to
TARGET_LIBOPCODES_CFILES also non-target library sources.
(CFILES): Factorize based on $(LIBOPCODES_CFILES), adding generator
files.
(ALL_MACHINES): Factorize based on $(TARGET_LIBOPCODES_CFILES).
(EXTRA_libopcodes_la_SOURCES): Use $(LIBOPCODES_CFILES).
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
ld/:
* Makefile.am (bin_PROGRAMS): Renamed from ...
(noinst_PROGRAMS): ... this.
(transform): Override, including the renaming of ld-new to ld.
(install-exec-local): Installation of ld in $(bindir) not needed
here any more.
(AM_CPPFLAGS): Renamed from ...
(INCLUDES): ... this.
(MAINTAINERCLEANFILES): Add ld.1.
* Makefile.in: Regenerate.
gold/:
* Makefile.am (AM_CPPFLAGS): Renamed from ...
(INCLUDES): ... this.
* testsuite/Makefile.am (AUTOMAKE_OPTIONS): Add -Wno-portability.
(AM_CPPFLAGS): Renamed from ...
(INCLUDE): ... this.
* Makefile.in, testsuite/Makefile.in: Regenerate.
bfd/:
* Makefile.am (libbfd_la_LDFLAGS): Initialize early, to allow
appending.
[INSTALL_LIBBFD] (bfdlib_LTLIBRARIES, bfdinclude_HEADERS): Set
only in this condition.
[!INSTALL_LIBBFD] (noinst_LTLIBRARIES, libbfd_la_LDFLAGS): New,
to build but not install libbfd.la in this condition.
(install-bfdlibLTLIBRARIES, uninstall-bfdlibLTLIBRARIES)
(install_libbfd, install_libbfd): Remove.
* Makefile.in: Regenerate.
binutils/:
* Makefile.am (AM_CPPFLAGS): Renamed from ...
(INCLUDES): ... this.
(bin2c$(EXEEXT_FOR_BUILD): Adjust rule.
(installcheck-local): Renamed from ...
(installcheck): ... this.
* Makefile.in: Regenerate.
gas/:
* Makefile.am (YFLAGS): Remove, not needed any more.
(AM_CPPFLAGS): Renamed from ...
(INCLUDES): ... this.
* Makefile.in: Regenerate.
gprof/:
* Makefile.am (AM_CPPFLAGS): Renamed from ...
(INCLUDES): ... this.
* Makefile.in: Regenerate.
opcodes/:
* Makefile.am (libopcodes_la_LDFLAGS): Initialize early.
[INSTALL_LIBBFD] (bfdlib_LTLIBRARIES): Set only in this condition.
[INSTALL_LIBBFD] (bfdinclude_DATA): New.
[!INSTALL_LIBBFD] (noinst_LTLIBRARIES): New.
[!INSTALL_LIBBFD] (libopcodes_la_LDFLAGS): Ensure libopcodes.la
is built shared even if it is not to be installed.
(install-bfdlibLTLIBRARIES,uninstall-bfdlibLTLIBRARIES)
(install_libopcodes, uninstall_libopcodes): Remove.
(AM_CPPFLAGS): Renamed from ...
(INCLUDES): ... this.
* Makefile.in: Regenerate.
opcodes/:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9 and cygnus, add
1.11, foreign, no-dist.
(MKDEP, m32c_opc_h): Remove variables.
(disassemble.lo): Rewrite using automake-style dependency
tracking rules; only list the dependency upon the primary source
file, but no included headers.
(m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo, m32c-opc.lo)
(i386-gen.o, ia64-gen.o): Remove dependency statements.
(EXTRA_libopcodes_la_SOURCES): New variable, list $(CFILES) to
ensure all dependency fragments are included in the Makefile.
(s390-opc.lo): Depend on s390-opc.tab.
(DEP, DEP1, dep.sed, dep, dep-in, dep-am): Remove rules.
(mkdep section): Remove.
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
* arm-disc.c (print_insn_coprocessor, print_insn_arm): Print only
lower 32 bits of long types to make hexadecimal output consistent
on both 32-bit and 64-bit hosts.
* arm-dis.c (coprocessor): Print the LDC and STC versions of the
LFM and SFM instructions as comments,.
Improve consistency of formatting for instructions displayed as
comments and decimal values displayed with their hexadecimal
equivalents.
Formatting tidy ups.
Updated expected disassembler regexps.
* arm-dis.c (enum opcode_sentinels): New: Used to mark the
boundary between variaant and generic coprocessor instuctions.
(coprocessor): Use it.
Fix architecture version of MCRR and MRRC instructions.
(arm_opcdes): Fix patterns for STRB and STRH instructions.
(print_insn_coprocessor): Check architecture and extension masks.
Print a hexadecimal version of any decimal constant that is
outside of the range of -16 to +32.
(print_arm_address): Add a return value of the offset used in the
adress, if it is worth printing a hexadecimal version of it.
(print_insn_neon): Print a hexadecimal version of any decimal
constant that is outside of the range of -16 to +32.
(print_insn_arm): Likewise.
(print_insn_thumb16): Likewise.
(print_insn_thumb32): Likewise.
PR 10297
* arm-dis.c (UNDEFINED_INSTRUCTION): New macro for a description
of an undefined instruction.
(arm_opcodes): Use it.
(thumb_opcod): Use it.
(thumb32_opc): Use it.
Update expected disassembly regrexps in GAS and LD testsuites.
Nick Clifton
Sebastian Pop
Ramana Radhakrishnan
Doug Evans
H.J. Lu
Daniel Jacobowitz
Maxim Kuvyrkov
DJ Delorie
Paul Brook
Alan Modra
Michael Eager
Peter Bergner
M R Swami Reddy
Ben Elliston
Andreas Krebbel
Andreas Schwab
Tristan Gingold
Jie Zhang
Dave Korn
Ralf Wildenhues
Jan Beulich
Doug Kwan
Dwarakanath Rajagopal