max-page-size only matters for demand paged executables or shared
libraries, and the ideal size is the largest value used by your
operating system. Values larger than necessary just waste file space
and memory. common-page-size also affects file and memory size,
trading a possible small increase in file size for a decrease in
memory size when the operating system is using a common-page-size
page. With a powerpc max-page-size of 64k and common-page-size of 4k
many executables will use no more memory pages when the system page
size is 4k than an executable linked with -z max-page-size=0x1000,
yet will still run on a system using 64k pages. However, when running
on a system using 64k pages relro protection will not be completely
effective.
Due to the relro problem, powerpc binutils has been using a default
common-page-size of 64k since 2014-12-18 (git commit 04c6a44c7),
leading to complaints about increased file and memory sizes. People
not using relro do have a valid reason to complain..
So this patch introduces an extra back-end value to use as the default
for common-page-size when generating relro executables, and enables
the support for powerpc. Non relro executables will now be generated
with a default common-page-size of 4k.
bfd/
* elf-bfd.h (struct elf_backend_data): Add relropagesize.
* elfxx-target.h (ELF_RELROPAGESIZE): Provide default and
sanity test.
(elfNN_bed): Init relropagesize.
* bfd.c (bfd_emul_get_commonpagesize): Add boolean param to
select relropagesize.
* elf32-ppc.c (ELF_COMMONPAGESIZE): Define as 0x1000.
(ELF_RELROPAGESIZE): Define as ELF_MAXPAGESIZE.
(ELF_MINPAGESIZE): Don't define.
* elf64-ppc.c (ELF_COMMONPAGESIZE): Define as 0x1000.
(ELF_RELROPAGESIZE): Define as ELF_MAXPAGESIZE.
* bfd-in2.h: Regenerate.
ld/
* ldmain.c (main): Move config.maxpagesize and
config.commonpagesize initialization to..
* ldemul.c (after_parse_default): ..here.
* testsuite/ld-powerpc/ppc476-shared.d: Pass -z common-page-size.
* testsuite/ld-powerpc/ppc476-shared2.d: Likewise.
This patch adds the following relocation support into binutils gas.
BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12_NC.
Those relocations includes both ip64 and ilp32 variant.
Define a SEC_FIXED_SIZE section flag for target backends to use for
output sections whose size has been fixed in the psABI. The size of
such sections will not be changed anyhow by the generic linker and it is
up to the target backend to get their size right.
bfd/
* section.c (SEC_FIXED_SIZE): New macro.
* bfd-in2.h: Regenerate.
ld/
* ldlang.c (insert_pad): Do not change output section's size if
SEC_FIXED_SIZE is set in the flags.
(size_input_section): Likewise.
(lang_size_sections_1): Likewise.
(lang_reset_memory_regions): Likewise.
Remove the SEC_HAS_GOT_REF section flag no longer in use since commit
a252afa4cd ("Fix linking of PIC code on PA"),
<https://sourceware.org/ml/binutils/2003-08/msg00467.html>, to make the
bit position available for reuse.
bfd/
* section.c (SEC_HAS_GOT_REF): Remove macro.
* bfd-in2.h: Regenerate.
FT32B is a new FT32 family member. It has a code
compression scheme, which requires the use of linker
relaxations. The change is quite large, so submission
is in several parts.
Part 1 adds a 15-bit instruction field, and CPU-specific functions for
the code compression that are used in binutils and GDB.
bfd/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elf32-ft32.c: Add HOWTO R_FT32_15.
* reloc.c: Add BFD_RELOC_FT32_15.
gas/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* config/tc-ft32.c (md_assemble): Replace FT32_FLD_K8 with
K15.
(md_apply_fix, tc_gen_reloc): Add BFD_RELOC_FT32_15.
include/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* elf/ft32.h: Add R_FT32_15.
* opcode/ft32.h: Replace FT32_FLD_K8 with K15.
(ft32_shortcode, sc_compar, ft32_split_shortcode,
ft32_merge_shortcode, ft32_merge_shortcode): New functions.
opcodes/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* opcodes/ft32-dis.c (print_insn_ft32): Replace FT32_FLD_K8 with K15.
* opcodes/ft32-opc.c (ft32_opc_info): Replace FT32_FLD_K8 with
K15. Add jmpix pattern.
sim/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* sim/ft32/interp.c (step_once): Replace FT32_FLD_K8 with K15.
* reloc.c (enum bfd_reloc_status): Start values at 2.
* bfd-in2.h: Regenerate.
* elfnn-aarch64.c (aarch64_relocate): Invert sense of function, so
that a TRUE return indicates success. Compare the result of
calling _bfd_aarch64_elf_put_addend against bfd_reloc_ok.
(build_one_stub): Change sense of tests against aarch64_relocate
return value.
(elfNN_aarch64_tls_relax): Return bfd_reloc_notsupported, rather
than FALSE, when an error is detected.
(elfNN_aarch64_final_link_relocate): Likewise.
* testsuite/ld-aarch64/pcrel_pic_defined.d: Expect errors not
warnings. Expect errors about unsupported relocations.
* testsuite/ld-aarch64/pcrel_pic_undefined.d: Likewise.
A downside to the 2017-10-04 PR22245 fix is that bfd_set_error can now
silently accept invalid errors if/when someone passes the a value of
the wrong enumeration type, which previously would be caught by the
-Wenum-conversion warning.
PR 22245
* bfd.c (bfd_set_error): Revert 2017-10-04 change. Remove
ellipsis parameter. Split out bfd_error_on_input code to..
(bfd_set_input_error): .. New function.
* archive.c (_bfd_write_archive_contents): Use bfd_set_input_error.
* vms-lib.c (_bfd_vms_lib_write_archive_contents): Likewise.
* bfd-in2.h: Regenerate.
Passing enum as a first argument to variadic argument function
may lead to undefined behavior. The explanation on CERT site:
https://www.securecoding.cert.org/confluence/display/cplusplus/
EXP58-CPP.+Pass+an+object+of+the+correct+type+to+va_start
The bug was found by Kirill Nedostoev (nedostoev.ka@phystech.edu)
when he tried to build GNU binutils with Clang 7.
PR 22245
* bfd.c (bfd_set_error): Avoid UB on passing arg to va_start that
undergoes default promotion.
* bfd-in2.h: Regenerate.
The following relocation types were added to GCC/binutils:
ARC_JLI_SECTOFF is a relocation type in Metaware that is now used by
GCC as well to adjust the index of function calls to functions with
attribute jli_call_always.
bfd/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
John Eric Martin <John.Martin@emmicro-us.com>
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elf32-arc.c (JLI): Define.
* reloc.c: Add JLI relocations.
gas/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/jli-1.d: New file.
* testsuite/gas/arc/jli-1.s: Likewise.
* testsuite/gas/arc/taux.d: Update for jli_base.
include/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
John Eric Martin <John.Martin@emmicro-us.com>
* elf/arc-reloc.def: Add JLI relocs howto.
* opcode/arc-func.h (replace_jli): New function.
ld/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
John Eric Martin <John.Martin@emmicro-us.com>
* emulparams/arcelf.sh (JLI_START_TABLE): Define.
* scripttempl/elfarc.sc: Handle jlitab section.
* scripttempl/elfarcv2.sc: Likewise.
* testsuite/ld-arc/arc.exp: Add JLI test.
* testsuite/ld-arc/jli-script.ld: New file.
* testsuite/ld-arc/jli-simple.dd: Likewise.
* testsuite/ld-arc/jli-simple.rd: Likewise.
* testsuite/ld-arc/jli-simple.s: Likewise.
* testsuite/ld/testsuite/ld-arc/jli-overflow.s: Likewise.
* testsuite/ld/testsuite/ld-arc/jli-overflow.d: Likewise.
* testsuite/ld/testsuite/ld-arc/jli-overflow.err: Likewise.
opcode/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
John Eric Martin <John.Martin@emmicro-us.com>
* arc-opc.c (UIMM10_6_S_JLIOFF): Define.
(UIMM3_23): Adjust accordingly.
* arc-regs.h: Add/correct jli_base register.
* arc-tbl.h (jli_s): Likewise.
bfd_get_size and bfd_get_file_size should return the unsigned file
size. Otherwise they return negative values for file >= 2GB with
32-bit ufile_ptr.
bfd/
* bfd-in2.h: Regenerated.
* bfdio.c (bfd_get_size): Change return type to ufile_ptr.
(bfd_get_file_size): Likewise.
binutils/
* objdump.c (dump_relocs_in_section): Cast to ufile_ptr when
comparing against bfd_get_file_size return.
Add support for the Imagination interAptiv MR2 MIPS32r3 processor with
the MIPS16e2 ASE as per documentation, including in particular:
1. Support for implementation-specific interAptiv MR2 COPYW and UCOPYW
MIPS16e2 instructions[1], for assembly and disassembly,
2. Support for implementation-specific interAptiv MR2 SAVE and RESTORE
regular MIPS instructions[2], for assembly and disassembly,
3. ELF binary file annotation for the interAptiv MR2 MIPS architecture
extension.
4. Support for interAptiv MR2 architecture selection for assembly, in
the form of the `-march=interaptiv-mr2' command-line option and its
corresponding `arch=interaptiv-mr2' setting for the `.set' and
`.module' pseudo-ops.
5. Support for interAptiv MR2 architecture selection for disassembly,
in the form of the `mips:interaptiv-mr2' target architecture, for
use e.g. with the `-m' command-line option for `objdump'.
Parts of this change by Matthew Fortune and Andrew Bennett.
References:
[1] "MIPS32 interAptiv Multiprocessing System Software User's Manual",
Imagination Technologies Ltd., Document Number: MD00904, Revision
02.01, June 15, 2016, Section 24.3 "MIPS16e2 Implementation Specific
Instructions", pp. 878-883
[2] same, Chapter 25 "Implementation-specific Instructions", pp. 911-917
include/
* elf/mips.h (E_MIPS_MACH_IAMR2): New macro.
(AFL_EXT_INTERAPTIV_MR2): Likewise.
* opcode/mips.h: Document new operand codes defined.
(INSN_INTERAPTIV_MR2): New macro.
(INSN_CHIP_MASK): Adjust accordingly.
(CPU_INTERAPTIV_MR2): New macro.
(cpu_is_member) <CPU_INTERAPTIV_MR2>: New case.
(MIPS16_ALL_ARGS): Rename to...
(MIPS_SVRS_ALL_ARGS): ... this.
(MIPS16_ALL_STATICS): Rename to...
(MIPS_SVRS_ALL_STATICS): ... this.
bfd/
* archures.c (bfd_mach_mips_interaptiv_mr2): New macro.
* cpu-mips.c (I_interaptiv_mr2): New enum value.
(arch_info_struct): Add "mips:interaptiv-mr2" entry.
* elfxx-mips.c (_bfd_elf_mips_mach) <E_MIPS_MACH_IAMR2>: New
case.
(mips_set_isa_flags) <bfd_mach_mips_interaptiv_mr2>: Likewise.
(bfd_mips_isa_ext) <bfd_mach_mips_interaptiv_mr2>: Likewise.
(print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise.
(mips_mach_extensions): Add `bfd_mach_mipsisa32r3' and
`bfd_mach_mips_interaptiv_mr2' entries.
* bfd-in2.h: Regenerate.
opcodes/
* mips-formats.h (INT_BIAS): New macro.
(INT_ADJ): Redefine in INT_BIAS terms.
* mips-dis.c (mips_arch_choices): Add "interaptiv-mr2" entry.
(mips_print_save_restore): New function.
(print_insn_arg) <OP_SAVE_RESTORE_LIST>: Update comment.
(validate_insn_args) <OP_SAVE_RESTORE_LIST>: Remove `abort'
call.
(print_insn_args): Handle OP_SAVE_RESTORE_LIST.
(print_mips16_insn_arg): Call `mips_print_save_restore' for
OP_SAVE_RESTORE_LIST handling, factored out from here.
* mips-opc.c (decode_mips_operand) <'-'> <'m'>: New case.
(RD_31, RD_SP, WR_SP, MOD_SP, IAMR2): New macros.
(mips_builtin_opcodes): Add "restore" and "save" entries.
* mips16-opc.c (decode_mips16_operand) <'n', 'o'>: New cases.
(IAMR2): New macro.
(mips16_opcodes): Add "copyw" and "ucopyw" entries.
binutils/
* readelf.c (get_machine_flags) <E_MIPS_MACH_IAMR2>: New case.
(print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise.
* NEWS: Mention Imagination interAptiv MR2 processor support.
gas/
* config/tc-mips.c (validate_mips_insn): Handle
OP_SAVE_RESTORE_LIST specially.
(mips_encode_save_restore, mips16_encode_save_restore): New
functions.
(match_save_restore_list_operand): Factor out SAVE/RESTORE
operand insertion into the instruction word or halfword to these
new functions.
(mips_cpu_info_table): Add "interaptiv-mr2" entry.
* doc/c-mips.texi (MIPS Options): Add `interaptiv-mr2' to the
`-march=' argument list.
The symbol address in .eh_frame may be adjusted in
_bfd_elf_discard_section_eh_frame, and the content of .eh_frame will be
adjusted in _bfd_elf_write_section_eh_frame. Therefore, we cannot insert
a relocation whose addend symbol is in .eh_frame. Othrewise, the value
may be adjusted twice.
bfd/ChangeLog
2017-06-26 Kuan-Lin Chen <rufus@andestech.com>
* elfnn-riscv.c (perform_relocation): Support the new
R_RISCV_32_PCREL relocation.
(riscv_elf_relocate_section): Likewise.
* elfxx-riscv.c (howto_table): Likewise.
(riscv_reloc_map): Likewise.
* bfd-in2.h (BFD_RELOC_RISCV_32_PCREL): New relocation.
* libbfd.h: Regenerate.
gas/ChangeLog
2017-06-26 Kuan-Lin Chen <rufus@andestech.com>
* config/tc-riscv.c (md_apply_fix) [BFD_RELOC_32]: Convert to a
R_RISCV_32_PCREL relocation.
include/ChangeLog
2017-06-26 Kuan-Lin Chen <rufus@andestech.com>
* elf/riscv.h (R_RISCV_32_PCREL): New.
BFD_RELOC_AARCH64_ADR_GOTPAGE should be BFD_RELOC_AARCH64_ADR_GOT_PAGE.
bfd/
* reloc.c (BFD_RELOC_AARCH64_ADR_GOTPAGE): Rename to
BFD_RELOC_AARCH64_ADR_GOT_PAGE
* bfd-in2.h: Regenerated.
We can't use stat() to get archive element size. Add bfd_get_file_size
to get size for both normal files and archive elements.
bfd/
PR binutils/21519
* bfdio.c (bfd_get_file_size): New function.
* bfd-in2.h: Regenerated.
binutils/
PR binutils/21519
* objdump.c (dump_relocs_in_section): Replace get_file_size
with bfd_get_file_size to get archive element size.
* testsuite/binutils-all/objdump.exp (test_objdump_f): New
proc.
(test_objdump_h): Likewise.
(test_objdump_t): Likewise.
(test_objdump_r): Likewise.
(test_objdump_s): Likewise.
Add objdump tests on archive.
This patch adds a new entry point to the BFD_JUMP_TABLE_RELOCS. The
previous common implementation `bfd_set_reloc', in bfd/bfd.c, has been
moved to bfd/reloc.c with the name `_bfd_generic_set_reloc', and all
BFD targets has been adapted to use it.
This patch doesn't introduce any change on functionality, but prepares
the ground for further work.
bfd/ChangeLog:
2017-05-10 Jose E. Marchesi <jose.marchesi@oracle.com>
* targets.c (BFD_JUMP_TABLE_RELOCS): Add NAME##_set_reloc.
(struct bfd_target): New field _bfd_set_reloc.
* bfd.c (bfd_set_reloc): Call backend _set_bfd.
* reloc.c (_bfd_generic_set_reloc): New function.
* coffcode.h (coff_set_reloc): Define to _bfd_generic_set_reloc.
* nlm-target.h (nlm_set_reloc): Likewise.
* coff-rs6000.c (_bfd_xcoff_set_reloc): Likewise.
* aout-tic30.c (MY_set_reloc): Likewise.
* aout-target.h (MY_set_reloc): Likewise.
* elfxx-target.h (bfd_elfNN_set_reloc): Likewise.
* coff-alpha.c (_bfd_ecoff_set_reloc): Likewise.
* mach-o-target.c (bfd_mach_o_set_reloc): Likewise.
* vms-alpha.c (alpha_vms_set_reloc): Likewise.
* aout-adobe.c (aout_32_set_reloc): Likewise.
* bout.c (b_out_set_reloc): Likewise.
* coff-mips.c (_bfd_ecoff_set_reloc): Likewise.
* i386os9k.c (aout_32_set_reloc): Likewise.
* ieee.c (ieee_set_reloc): Likewise.
* oasys.c (oasys_set_reloc): Likewise.
* som.c (som_set_reloc): Likewise.
* versados.c (versados_set_reloc): Likewise.
* coff64-rs6000.c (rs6000_xcoff64_vec): Add
_bfd_generic_set_reloc.
(rs6000_xcoff64_aix_vec): LIkewise.
* libbfd.c (_bfd_norelocs_set_reloc): New function.
* libbfd-in.h: Prototype for _bfd_norelocs_set_reloc.
* i386msdos.c (msdos_set_reloc): Define to
_bfd_norelocs_set_reloc.
* elfcode.h (elf_set_reloc): Define.
* bfd-in2.h: Regenerated.
include * elf/wasm32.h: New file to support wasm32 architecture.
bfd * cpu-wasm32.c: New file to support wasm32 architecture.
* elf32-wasm32.c: New file to support wasm32 architecture.
* Makefile.am: Add wasm32 architecture.
* archures.c: Likewise.
* config.bfd: Likewise.
* configure.ac: Likewise.
* targets.c: Likewise.
This came up because I was looking at ld/tmpdir/addpcis.o and noticed
the odd addends on REL16DX_HA. They ought to both be -4. The error
crept in due REL16DX_HA howto being pc-relative (as indeed it should
be), and code at gas/write.c:1001 after this comment
/* Make it pc-relative. If the back-end code has not
selected a pc-relative reloc, cancel the adjustment
we do later on all pc-relative relocs. */
*not* cancelling the pc-relative adjustment. So I've made a dummy
non-relative split reloc so that the generic code handles this, rather
than attempting to add hacks later in md_apply_fix which would not be
very robust. Having the new internal reloc also makes it easy to
support
addpcis rx,sym@ha
as an equivalent to
addpcis rx,(sym-0f)@ha
0:
The patch also fixes overflow checking, which must test whether the
addi will overflow too since @l relocs don't have any overflow check.
Lastly, since I was poking at md_apply_fix, I arranged to have the
generic gas/write.c code emit errors for subtraction expressions where
we lack reloc support.
include/
* elf/ppc64.h (R_PPC64_16DX_HA): New. Expand fake reloc comment.
* elf/ppc.h (R_PPC_16DX_HA): Likewise.
bfd/
* reloc.c (BFD_RELOC_PPC_16DX_HA): New.
* elf64-ppc.c (ppc64_elf_howto_raw <R_PPC64_16DX_HA>): New howto.
(ppc64_elf_reloc_type_lookup): Translate new bfd reloc.
(ppc64_elf_ha_reloc): Correct overflow test on REL16DX_HA.
(ppc64_elf_relocate_section): Likewise.
* elf32-ppc.c (ppc_elf_howto_raw <R_PPC_16DX_HA>): New howto.
(ppc_elf_reloc_type_lookup): Translate new bfd reloc.
(ppc_elf_check_relocs): Handle R_PPC_16DX_HA to pacify gcc.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
gas/
* config/tc-ppc.c (md_assemble): Use BFD_RELOC_PPC_16DX_HA for addpcis.
(md_apply_fix): Remove fx_subsy check. Move code converting to
pcrel reloc earlier and handle BFD_RELOC_PPC_16DX_HA. Remove code
emiiting errors on seeing fx_pcrel set on unexpected relocs, as
that is done now by the generic code via..
* config/tc-ppc.h (TC_FORCE_RELOCATION_SUB_LOCAL): ..this. Define.
(TC_VALIDATE_FIX_SUB): Define.
ld/
* testsuite/ld-powerpc/addpcis.d: Define ext1 and ext2 at
limits of addpcis range.
Give this bfd-internal symbol with external linkage a _bfd_ prefix to
avoid collisions in the global symbol namespace.
bfd/ChangeLog:
2017-02-17 Pedro Alves <palves@redhat.com>
* bfd-in.h (bfd_read, bfd_write): Adjust to rename.
(warn_deprecated): Rename to ...
(_bfd_warn_deprecated): ... this.
* libbfd.c (warn_deprecated): Rename to ...
(_bfd_warn_deprecated): ... this.
* bfd-in2.h: Regenerate.
PR binutils/20876
bfd * opncls.c (find_separate_debug_file): Add include_dirs
parameter. Only include the directory part of the bfd's filename
in search paths if include_dirs is true. Add a couple of extra
locations for looking for debug files.
( bfd_follow_gnu_debuglink): Update invocation of
find_separate_debug_file.
(bfd_follow_gnu_debugaltlink): Likewise.
(get_build_id): New function: Finds the build-id of the given bfd.
(get_build_id_name): New function: Computes the name of the
separate debug info file for a bfd, based upon its build-id.
(check_build_id_file): New function: Checks to see if a separate
debug info file exists at the given location, and that its
build-id matches that of the original bfd.
(bfd_follow_build_id_debuglink): New function: Finds a separate
debug info file for a given bfd by using the build-id method.
* dwarf2.c (_bfd_dwarf2_slurp_debug_info): Try using the build-id
method of locating a separate debug info file before using the
debuglink method.
* bfd-in2.h: Regenerate.
binutils * NEWS: Mention the new feature.
* testsuite/binutils-all/objdump.exp (test_build_id_debuglink):
New proc to test the location of separate debug info files using
the build-id method.
Before this commit we didn't cleanly support CFI directives because the
internal offsets used to get relaxed which broke them. This patch
significantly reworks how we handle linker relaxations:
* DWARF is now properly supported
* There is a ".option norelax" to disable relaxations, for when users
write assembly that can't be relaxed (if it's to be later patched up,
for example).
* There is an additional _RELAX relocation that specifies when previous
relocations can be relaxed.
We're in the process of documenting the RISC-V ELF ABI, which will
include documentation of our relocations
https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf.md
but we expect that this relocation set will remain ABI compatible in the
future (ie, it's safe to release).
Thanks to Kuan-Lin Chen for figuring out how to correctly relax the
debug info!
include/
* elf/riscv.h: Add R_RISCV_TPREL_I through R_RISCV_SET32.
bfd/
* reloc.c (BFD_RELOC_RISCV_TPREL_I): New relocation.
(BFD_RELOC_RISCV_TPREL_S): Likewise.
(BFD_RELOC_RISCV_RELAX): Likewise.
(BFD_RELOC_RISCV_CFA): Likewise.
(BFD_RELOC_RISCV_SUB6): Likewise.
(BFD_RELOC_RISCV_SET8): Likewise.
(BFD_RELOC_RISCV_SET8): Likewise.
(BFD_RELOC_RISCV_SET16): Likewise.
(BFD_RELOC_RISCV_SET32): Likewise.
* elfnn-riscv.c (perform_relocation): Handle the new
relocations.
(_bfd_riscv_relax_tls_le): Likewise.
(_bfd_riscv_relax_align): Likewise.
(_bfd_riscv_relax_section): Likewise.
(howto_table): Likewise.
(riscv_reloc_map): Likewise.
(relax_func_t): New type.
(_bfd_riscv_relax_call): Add reserve_size argument, which
controls the maximal offset pessimism. Correct type of max_alignment.
(_bfd_riscv_relax_lui): Likewise.
(_bfd_riscv_relax_tls_le): Likewise.
(_bfd_riscv_relax_align): Likewise.
(_bfd_riscv_relax_section): Compute the required reserve size
when relocating and use it to when calling relax_func.
* bfd-in2.h: Regenerate.
* libbfd.h: Likewise.
gas/
* config/tc-riscv.c (riscv_set_options): Add relax.
(riscv_opts): Likewise.
(s_riscv_option): Add relax and norelax.
(riscv_apply_const_reloc): New function.
(append_insn): Move constant relocation handling to
riscv_apply_const_reloc.
(md_pcrel_from): Likewise.
(parse_relocation): Skip BFD_RELOC_UNUSED.
(md_pcrel_from): Handle BFD_RELOC_RISCV_SUB6,
BFD_RELOC_RISCV_RELAX, BFD_RELOC_RISCV_CFA.
(md_apply_fix): Likewise.
(riscv_pre_output_hook): New function.
* config/tc-riscv.h (md_pre_output_hook): Define.
(riscv_pre_output_hook): Declare.
(DWARF_CIE_DATA_ALIGNMENT): Always -4.
Respect any ASE flags recorded in ELF file structures for the purpose of
selecting instructions to be disassembled, preventing code from being
hex-dumped even though having been clearly indicated as valid at the
assembly time. Use date from the MIPS ABI flags structure if present,
and otherwise there may be an MDMX ASE flag set in the ELF file header.
For backwards compatibility only set extra flags and do not clear any,
preserving all previously set by the architecture selected to be
disassembled for.
include/
* elf/mips.h (Elf_Internal_ABIFlags_v0): Also declare struct
typedef as `elf_internal_abiflags_v0'.
bfd/
* bfd-in.h (elf_internal_abiflags_v0): New struct declaration.
(bfd_mips_elf_get_abiflags): New prototype.
* elfxx-mips.c (bfd_mips_elf_get_abiflags): New function.
* bfd-in2.h: Regenerate.
opcodes/
* mips-dis.c (mips_convert_abiflags_ases): New function.
(set_default_mips_dis_options): Also infer ASE flags from ELF
file structures.
binutils/
* testsuite/binutils-all/mips/mips-ase-1.d: New test.
* testsuite/binutils-all/mips/mips-ase-2.d: New test.
* testsuite/binutils-all/mips/mips-ase-3.d: New test.
* testsuite/binutils-all/mips/mips-ase-1.s: New test source.
* testsuite/binutils-all/mips/mips-ase-2.s: New test source.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
It was like printf, which means you can't use bfd_set_error_handler to
hook in a function to do something and then call the original handler.
The patch also deletes some unused functions and makes pointers local.
bfd/
* bfd-in.h: Include stdarg.h.
* bfd.c (bfd_error_handler_type): Make like vprintf.
(_bfd_error_internal): Rename from _bfd_error_handler. Make static.
(error_handler_internal): New function, split out from..
(_bfd_default_error_handler): ..here. Rename to _bfd_error_handler.
(bfd_set_error_handler): Update.
(bfd_get_error_handler, bfd_get_assert_handler): Delete.
(_bfd_assert_handler): Make static.
* coffgen.c (null_error_handler): Update params.
* elf-bfd.h (struct elf_backend_data <link_order_error_handler>):
Don't use bfd_error_handler_type.
* elf64-mmix.c (mmix_dump_bpo_gregs): Likewise.
* elfxx-target.h (elf_backend_link_order_error_handler): Default
to _bfd_error_handler.
* libbfd-in.h (_bfd_default_error_handler): Don't declare.
(bfd_assert_handler_type): Likewise.
(_bfd_error_handler): Update.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
ld/
* ldlang.c (ignore_bfd_errors): Update params.
2016-08-26 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
* bfd-in.h (struct elf32_arm_params): Define.
(bfd_elf32_arm_set_target_relocs): Rename into ...
(bfd_elf32_arm_set_target_params): This. Use a struct
elf32_arm_params to pass all parameters but the bfd and bfd_link_info.
* bfd-in2.h: Regenerate.
* elf32-arm.c (bfd_elf32_arm_set_target_relocs): Rename into ...
(bfd_elf32_arm_set_target_params): This. Pass all values via a struct
elf32_arm_params rather than as individual parameters.
ld/
* emultempl/armelf.em (params): New static variable.
(thumb_entry_symbol, byteswap_code, target1_is_rel, target2_type,
fix_v4bx, use_blx, vfp11_denorm_fix, stm32l4xx_fix, fix_cortex_a8,
no_enum_size_warning, no_wchar_size_warning, pic_veneer,
merge_exidx_entries, fix_arm1176, cmse_implib): move as part of the
above new structure.
(arm_elf_before_allocation): Access static variable from the params
structure.
(gld${EMULATION_NAME}_finish): Likewise.
(arm_elf_create_output_section_statements): Likewise and pass the
address of that structure to bfd_elf32_arm_set_target_relocs instead
of the static variables.
(PARSE_AND_LIST_ARGS_CASES): Access static variable from the params
structure.
Added support for ARC_SDA_12 reloc.
Fixed ARC_N32_ME.
Added ME (middle-endian) to ARC_SDA_12 reloc.
bfd/ChangeLog:
Cupertino Miranda <cmiranda@synopsys.com>
* reloc.c: Fixed type in ARC_SECTOFF relocations. Added ARC_SDA_12
relocation.
* bfd-in2.h: Regenerated from the previous changes.
* libbfd.h: Regenerated from the previous changes.
include/ChangeLog:
Cupertino Miranda <cmiranda@synopsys.com>
* elf/arc-reloc.def: Fixed relocation formula for N*, SDA, SDA_12,
SDA_16_LD*, S13_PCREL, N32_ME, SECTOFF_* relocations.
* opcode/arc-func.h (replace_disp12s): Added. Used for SDA_12 relocation.
2016-08-26 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
* bfd-in.h (bfd_elf32_arm_set_target_relocs): Add a new parameter for
the input import library bfd.
* bfd-in2.h: Regenerate.
* elf32-arm.c (struct elf32_arm_link_hash_table): New in_implib_bfd
and new_cmse_stub_offset fields.
(stub_hash_newfunc): Initialize stub_offset and stub_template_size to
-1.
(elf32_arm_add_stub): Likewise for stub_offset.
(arm_new_stubs_start_offset_ptr): New function.
(arm_build_one_stub): Only allocate a stub_offset if it is -1. Allow
empty SG veneers to have zero relocations.
(arm_size_one_stub): Only initialize stub size and template
information for non empty veneers. Do not update veneer section size
if veneer already has an offset.
(elf32_arm_create_stub): Return the stub entry pointer or NULL instead
of a boolean indicating success or failure.
(cmse_scan): Change stub_changed parameter into an integer pointer
parameter cmse_stub_created to count the number of stub created and
adapt to change of return value in elf32_arm_create_stub.
(cmse_entry_fct_p): New function.
(arm_list_new_cmse_stub): Likewise.
(set_cmse_veneer_addr_from_implib): Likewise.
(elf32_arm_size_stubs): Define cmse_stub_created, pass its address to
cmse_scan instead of that of cmse_stub_changed to compute the number
of stub created and use it to initialize stub_changed. Call
set_cmse_veneer_addr_from_implib after all cmse_scan. Adapt to change
of return value in elf32_arm_create_stub. Use
arm_stub_section_start_offset () if not NULL to initialize size of
secure gateway veneers section. Initialize stub_offset of Cortex-A8
erratum fix to -1. Use ret to hold return value.
(elf32_arm_build_stubs): Use arm_stub_section_start_offset () if not
NULL to initialize size of secure gateway veneers section. Adapt
comment to stress the importance of zeroing veneer section content.
(bfd_elf32_arm_set_target_relocs): Add new in_implib_bfd parameter to
initialize eponymous field in struct elf32_arm_link_hash_table.
ld/
* emultempl/armelf.em (in_implib_filename): Declare and initialize new
variable.
(arm_elf_create_output_section_statements): Open import input library
file for writing and pass resulting in_implib_bfd to
bfd_elf32_arm_set_target_relocs.
(PARSE_AND_LIST_PROLOGUE): Define OPTION_IN_IMPLIB option.
(PARSE_AND_LIST_LONGOPTS): Define --in-implib option.
(PARSE_AND_LIST_OPTIONS): Add help message for --in-implib option.
(PARSE_AND_LIST_ARGS_CASES): Handle new OPTION_IN_IMPLIB case.
* ld.texinfo (--cmse-implib): Update to mention --in-implib.
(--in-implib): Document new option.
* NEWS: Likewise.
* testsuite/ld-arm/arm-elf.exp
(Secure gateway import library generation): add --defsym VER=1 to gas
CLI.
(Secure gateway import library generation: errors): Likewise.
(Input secure gateway import library): New test.
(Input secure gateway import library: no output import library):
Likewise.
(Input secure gateway import library: not an SG input import library):
Likewise.
(Input secure gateway import library: earlier stub section base):
Likewise.
(Input secure gateway import library: later stub section base):
Likewise.
(Input secure gateway import library: veneer comeback): Likewise.
(Input secure gateway import library: entry function change):
Likewise.
* testsuite/ld-arm/cmse-implib.s: Add input import library testing.
* testsuite/ld-arm/cmse-implib.rd: Update accordingly.
* testsuite/ld-arm/cmse-new-implib.out: New file.
* testsuite/ld-arm/cmse-new-implib.rd: Likewise.
* testsuite/ld-arm/cmse-new-implib-no-output.out: Likewise.
* testsuite/ld-arm/cmse-new-implib-not-sg-in-implib.out: Likewise.
* testsuite/ld-arm/cmse-new-earlier-later-implib.out: Likewise.
* testsuite/ld-arm/cmse-new-comeback-implib.rd: Likewise.
* testsuite/ld-arm/cmse-new-wrong-implib.out: Likewise.
Not much to see here, just renaming a function.
bfd/
* targets.c (bfd_seach_for_target): Rename to..
(bfd_iterate_over_targets): ..this. Rewrite doc.
* bfd-in2.h: Regenerate.
ld/
* ldlang.c (open_output): Replace bfd_search_for_target with
bfd_iterate_over_targets. Localize vars.
This patch adds support for the opcode architectures
SPARC_OPCODE_ARCH_V9{C,D,E,V,M} and its associated BFD machine numbers
bfd_mach_sparc_v9{c,d,e,v,m} and bfd_mach_sparc_v8plus{c,d,e,v,m}.
Note that for arches up to v9b (UltraSPARC III), the detection of the
BFD machine type was based on the bits in the e_machine field of the ELF
header. However, there are no more available bits in that field, so
this patch takes the approach of using the hardware capabilities stored
in the object attributes HWCAPS/HWCAPS2 in order to characterize the
machine the object was built for.
bfd/ChangeLog:
2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* archures.c (bfd_mach_sparc_v8plusc): Define.
(bfd_mach_sparc_v9c): Likewise.
(bfd_mach_sparc_v8plusd): Likewise.
(bfd_mach_sparc_v9d): Likewise.
(bfd_mach_sparc_v8pluse): Likewise.
(bfd_mach_sparc_v9e): Likewise.
(bfd_mach_sparc_v8plusv): Likewise
(bfd_mach_sparc_v9v): Likewise.
(bfd_mach_sparc_v8plusm): Likewise.
(bfd_mach_sparc_v9m): Likewise.
(bfd_mach_sparc_v9_p): Adapt to v8plusm and v9m.
(bfd_mach_sparc_64bit_p): Likewise.
* bfd-in2.h: Regenerate.
* cpu-sparc.c (arch_info_struct): Add entries for
bfd_mach_sparc_v8plus{c,d,e,v,m} and bfd_mach_sparc_v9{c,d,e,v,m}.
* aoutx.h (machine_type): Handle bfd_mach_sparc_v8plus{c,d,e,v,m}
and bfd_mach_sparc_v9{c,d,e,v,m}.
* elf32-sparc.c (elf32_sparc_final_write_processing): Likewise.
* elfxx-sparc.c (_bfd_sparc_elf_object_p): Likewise.
include/ChangeLog:
2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* opcode/sparc.h (enum sparc_opcode_arch_val): Add
SPARC_OPCODE_ARCH_V9C, SPARC_OPCODE_ARCH_V9D,
SPARC_OPCODE_ARCH_V9E, SPARC_OPCODE_ARCH_V9V and
SPARC_OPCODE_ARCH_V9M.
opcodes/ChangeLog:
2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-dis.c (MASK_V9): Add SPARC_OPCODE_ARCH_V9{C,D,E,V,M}.
(compute_arch_mask): Handle bfd_mach_sparc_v8plus{c,d,e,v,m} and
bfd_mach_sparc_v9{c,d,e,v,m}.
* sparc-opc.c (MASK_V9C): Define.
(MASK_V9D): Likewise.
(MASK_V9E): Likewise.
(MASK_V9V): Likewise.
(MASK_V9M): Likewise.
(v6): Add MASK_V9{C,D,E,V,M}.
(v6notlet): Likewise.
(v7): Likewise.
(v8): Likewise.
(v9): Likewise.
(v9andleon): Likewise.
(v9a): Likewise.
(v9b): Likewise.
(v9c): Define.
(v9d): Likewise.
(v9e): Likewise.
(v9v): Likewise.
(v9m): Likewise.
(sparc_opcode_archs): Add entry for v9{c,d,e,v,m}.
Many more places use abfd->my_archive rather than bfd_my_archive (abfd),
so let's make the code consistently use the first idiom.
bfd/
* bfd-in.h (bfd_my_archive): Delete.
* bfd-in2.h: Regenerate.
binutils/
* ar.c: Expand uses of bfd_my_archive.
* size.c: Likewise.
ld/
* ldlang.c: Expand uses of bfd_my_archive.
* ldmain.c: Likewise.
* ldmisc.c: Likewise.
* plugin.c: Likewise.
VLE is an encoding, not a particular processor architecture, so it
isn't really proper to select insns based on PPC_OPCODE_VLE. For
example
{"evaddw", VX (4, 512), VX_MASK, PPCSPE|PPCVLE, PPCNONE, {RS, RA, RB}},
{"vaddubs", VX (4, 512), VX_MASK, PPCVEC|PPCVLE, PPCNONE, {VD, VA, VB}},
shows two insns that have the same encoding, both available with VLE.
Enabling both with VLE means we can't disassemble the second variant
even if -Maltivec is given rather than -Mspe. Also, we don't check
user assembly against the processor type as well as we could.
Another problem is that when using the VLE encoding, insns from the
main ppc opcode table are not available, except those using opcode 4
and 31. Correcting this revealed two errors in the ld testsuite,
use of "nop" and "rfmci" when -mvle.
This patch fixes those problems in the opcode table, and removes
PPCNONE. I find a plain 0 distracts less from other values.
In addition, I've implemented code to recognize some machine values
from the apuinfo note present in ppc32 objects. It's not a complete
disambiguation since we're lacking info to detect newer chips, but
what we have should help with disassembly.
include/
* elf/ppc.h (APUINFO_SECTION_NAME, APUINFO_LABEL, PPC_APUINFO_ISEL,
PPC_APUINFO_PMR, PPC_APUINFO_RFMCI, PPC_APUINFO_CACHELCK,
PPC_APUINFO_SPE, PPC_APUINFO_EFS, PPC_APUINFO_BRLOCK,
PPC_APUINFO_VLE: Define.
opcodes/
* ppc-dis.c (ppc_opts): Delete extraneous parentheses. Default
cpu for "vle" to e500.
* ppc-opc.c (ALLOW8_SPRG): Remove PPC_OPCODE_VLE.
(NO371, PPCSPE, PPCISEL, PPCEFS, MULHW, DCBT_EO): Likewise.
(PPCNONE): Delete, substitute throughout.
(powerpc_opcodes): Remove PPCVLE from "flags". Add to "deprecated"
except for major opcode 4 and 31.
(vle_opcodes <se_rfmci>): Add PPCRFMCI to flags.
bfd/
* cpu-powerpc.c (powerpc_compatible): Allow bfd_mach_ppc_vle entry
to match other 32-bit archs.
* elf32-ppc.c (_bfd_elf_ppc_set_arch): New function.
(ppc_elf_object_p): Call it.
(ppc_elf_special_sections): Use APUINFO_SECTION_NAME. Fix
overlong line.
(APUINFO_SECTION_NAME, APUINFO_LABEL): Don't define here.
* elf64-ppc.c (ppc64_elf_object_p): Call _bfd_elf_ppc_set_arch.
* bfd-in.h (_bfd_elf_ppc_at_tls_transform,
_bfd_elf_ppc_at_tprel_transform): Move to..
* elf-bfd.h: ..here.
(_bfd_elf_ppc_set_arch): Declare.
* bfd-in2.h: Regenerate.
gas/
* config/tc-ppc.c (PPC_APUINFO_ISEL, PPC_APUINFO_PMR,
PPC_APUINFO_RFMCI, PPC_APUINFO_CACHELCK, PPC_APUINFO_SPE,
PPC_APUINFO_EFS, PPC_APUINFO_BRLOCK, PPC_APUINFO_VLE): Don't define.
(ppc_setup_opcodes): Check vle disables powerpc_opcodes overridden
by vle_opcodes, and that vle flag doesn't enable opcodes. Don't
add vle_opcodes twice.
(ppc_cleanup): Use APUINFO_SECTION_NAME and APUINFO_LABEL.
ld/
* testsuite/ld-powerpc/apuinfo1.s: Delete nop.
* testsuite/ld-powerpc/apuinfo-vle2.s: New.
* testsuite/ld-powerpc/powerpc.exp: Use apuinfo-vle2.s.
2016-05-23 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
* bfd-in.h (bfd_elf32_arm_keep_private_stub_output_sections): Declare
bfd hook.
* bfd-in2.h: Regenerate.
* elf32-arm.c (arm_dedicated_stub_output_section_required): New
function.
(arm_dedicated_stub_output_section_required_alignment): Likewise.
(arm_dedicated_stub_output_section_name): Likewise.
(arm_dedicated_stub_input_section_ptr): Likewise.
(elf32_arm_create_or_find_stub_sec): Add stub type parameter and
function description comment. Add support for dedicated output stub
section to given stub types.
(elf32_arm_add_stub): Add a stub type parameter and pass it down to
elf32_arm_create_or_find_stub_sec.
(elf32_arm_create_stub): Pass stub type down to elf32_arm_add_stub.
(elf32_arm_size_stubs): Pass stub type when calling
elf32_arm_create_or_find_stub_sec for Cortex-A8 erratum veneers.
(bfd_elf32_arm_keep_private_stub_output_sections): New function.
ld/
* emultempl/armelf.em (arm_elf_before_allocation): Call
bfd_elf32_arm_keep_private_stub_output_sections before generic
before_allocation function.
2016-05-10 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
* bfd-in.h (elf32_arm_size_stubs): Add an output section parameter.
* bfd-in2.h: Regenerated.
* elf32-arm.c (struct elf32_arm_link_hash_table): Add an output section
parameter to add_stub_section callback.
(elf32_arm_create_or_find_stub_sec): Get output section from link_sec
and pass it down to add_stub_section.
(elf32_arm_add_stub): Set section to stub_sec if NULL before using it
for error message.
(elf32_arm_size_stubs): Add output section parameter to
add_stub_section function pointer parameter.
ld/
* emultempl/armelf.em (elf32_arm_add_stub_section): Add output_section
parameter and rename input_section parameter to after_input_section.
Append input stub section to the output section if after_input_section
is NULL.
When handling absolute relocations for global symbols bind within the
shared object, AArch64 will generate one dynamic RELATIVE relocation,
but won't apply the value for this absolution relocations at static
linking stage. This is different from AArch64 gold linker and x86-64.
This is not a bug as AArch64 is RELA, there is only guarantee that
relocation addend is placed in the relocation entry. But some
system softwares originally writen for x86-64 might assume AArch64
bfd linker gets the same behavior as x86-64, then they could take
advantage of this buy skipping those RELATIVE dynamic relocations
if the load address is the same as the static linking address.
This patch makes AArch64 BFD linker applies absolution relocations at
static linking stage for scenario described above. Meanwhile old AArch64
android loader has a bug (PR19163) which relies on current linker behavior
as a workaround, so the same option --no-apply-dynamic-relocs added.
Add support for arc/nps400 cmem instructions, these load and store
instructions are hard-wired to access "0x57f00000 + 16-bit-offset".
Supporting this relocation required some additions to the arc relocation
handling in the bfd library, as well as the standard changes required to
add a new relocation type.
There's a test of the new instructions in the assembler, and a test of
the relocation in the linker.
bfd/ChangeLog:
* reloc.c: Add BFD_RELOC_ARC_NPS_CMEM16 entry.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elf32-arc.c: Add 'opcode/arc.h' include.
(struct arc_relocation_data): Add symbol_name.
(arc_special_overflow_checks): New function.
(arc_do_relocation): Use arc_special_overflow_checks, reindent as
required, add an extra comment.
(elf_arc_relocate_section): Setup symbol_name in reloc_data.
gas/ChangeLog:
* testsuite/gas/arc/nps400-3.d: New file.
* testsuite/gas/arc/nps400-3.s: New file.
include/ChangeLog:
* elf/arc-reloc.def: Add ARC_NPS_CMEM16 reloc.
* opcode/arc.h (NPS_CMEM_HIGH_VALUE): Define.
ld/ChangeLog:
* testsuite/ld-arc/arc.exp: New file.
* testsuite/ld-arc/nps-1.s: New file.
* testsuite/ld-arc/nps-1a.d: New file.
* testsuite/ld-arc/nps-1b.d: New file.
* testsuite/ld-arc/nps-1b.err: New file.
opcodes/ChangeLog:
* arc-nps400-tbl.h: Add xldb, xldw, xld, xstb, xstw, and xst
instructions.
* arc-opc.c (insert_nps_cmem_uimm16): New function.
(extract_nps_cmem_uimm16): New function.
(arc_operands): Add NPS_XLDST_UIMM16 operand.
This commit introduces the nps400 machine type as a variant of arc.
There's a new flag in the assembler to select this machine type. All
other changes are just adding handling of the new machine type into the
relevant places.
The nps400 is an arc700 variant with some vendor specific instructions
added into the instruction set. This commit does not add any of the new
instructions, this is just laying the groundwork for future commits.
However, in preparation for these new instructions a new opcode define for
nps400 has been added to include/opcode/arc.h, this new opcode define is
used in the assembler and disassembler along with the existing define
for arc700 such that when assembling and disassembling for nps400 the
user will have access to all arc700 instructions and all the nps400
vendor extension instructions.
bfd/ChangeLog:
* archures.c (bfd_mach_arc_nps400): Define.
* bfd-in2.h: Regenerate.
* cpu-arc.c (arch_info_struct): New entry for nps400, renumber
some existing entries to make space.
* elf32-arc.c (arc_elf_object_p): Add nps400 case.
(arc_elf_final_write_processing): Likewise.
binutils/ChangeLog:
* readelf.c (decode_ARC_machine_flags): Handle nps400.
gas/ChangeLog:
* config/tc-arc.c (cpu_types): Add nps400 entry.
(check_zol): Handle nps400.
include/ChangeLog:
* elf/arc.h (E_ARC_MACH_NPS400): Define.
* opcode/arc.h (ARC_OPCODE_NPS400): Define.
opcodes/ChangeLog:
* arc-dis.c (print_insn_arc): Handle nps400.
include/elf
* arm.h: Add arm SHF_ARM_NOREAD section flag.
bfd * bfd-in2.h: Regenerate.
* section.c: Add SEC_ELF_NOREAD.
* elf32-arm.c (elf32_arm_post_process_headers): Only set
PF_X attribute if a segment only contains section with
SHF_ARM_NOREAD flag.
(elf32_arm_fake_sections): Add SEC_ELF_NOREAD conversion.
(elf32_arm_section_flags): New function to convert SHF_ARM_NOREAD
to bfd flag.
(elf32_arm_lookup_section_flags): New function to allow
INPUT_SECTION_FLAGS directive with SHF_ARM_NOREAD flag.
(elf32_arm_special_sections): Add special sections array
to catch section prefix by '.text.noread' pattern.
ld/testsuite
* ld-arm/arm-elf.exp: New tests.
* ld-arm/thumb1-input-section-flag-match.d: New
* ld-arm/thumb1-input-section-flag-match.s: New
* ld-arm/thumb1-noread-not-present-mixing-two-section.d: New
* ld-arm/thumb1-noread-not-present-mixing-two-section.s: New
* ld-arm/thumb1-noread-present-one-section.d: New
* ld-arm/thumb1-noread-present-one-section.s: New
* ld-arm/thumb1-noread-present-two-section.d: New
* ld-arm/thumb1-noread-present-two-section.s: New
binutils
* readelf.c (get_elf_section_flags): Add support for ARM specific
section flags.
To support thumb1 execute-only code we need to support four new
relocations (R_ARM_THM_ALU_ABS_G0_NC, R_ARM_THM_ALU_ABS_G1_NC,
R_ARM_THM_ALU_ABS_G2_NC and R_ARM_THM_ALU_ABS_G3_NC).
These relocations allow the static linker to finalize construction
of symbol address.
Typical sequence of code to get address of the symbol foo is then
the following :
movs r3, #:upper8_15:#foo
lsls r3, #8
adds r3, #:upper0_7:#foo
lsls r3, #8
adds r3, #:lower8_15:#foo
lsls r3, #8
adds r3, #:lower0_7:#foo
This will give following sequence of text and relocations after
assembly :
4: 2300 movs r3, #0
4: R_ARM_THM_ALU_ABS_G3_NC foo
6: 021b lsls r3, r3, #8
8: 3300 adds r3, #0
8: R_ARM_THM_ALU_ABS_G2_NC foo
a: 021b lsls r3, r3, #8
c: 3300 adds r3, #0
c: R_ARM_THM_ALU_ABS_G1_NC foo
e: 021b lsls r3, r3, #8
10: 3300 adds r3, #0
10: R_ARM_THM_ALU_ABS_G0_NC foo
Add a new relocation that marks large-model entry code, for edit back
to medium-model.
include/elf/
* ppc64.h (R_PPC64_ENTRY): Define.
bfd/
* reloc.c (BFD_RELOC_PPC64_ENTRY): New.
* elf64-ppc.c (reloc_howto_type ppc64_elf_howto_raw): Add
entry for R_PPC64_ENTRY.
(LD_R2_0R12, ADD_R2_R2_R12, LIS_R2, ADDIS_R2_R12): Define.
(ppc64_elf_reloc_type_lookup): Handle R_PPC64_ENTRY.
(ppc64_elf_relocate_section): Edit code at R_PPC64_ENTTY. Use
new insn defines.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
This patch fixes all occurences of left-shifting negative constants in C code
which is undefined by the C standard.
bfd/ChangeLog:
* elf64-ppc.c (ppc64_elf_size_stubs, ppc64_elf_build_stubs): Fix left
shift of negative value.
* libbfd.c (safe_read_leb128): Likewise.
* dwarf2.c (place_sections): Likewise.
* bfd-in.h (align_power): Likewise.
* bfd-in2.h (align_power): Likewise.
If given input sections with differing flags, we'd like to place the
section according to the final output section flags.
bfd/
PR ld/19162
* elflink.c (_bfd_elf_gc_mark_reloc): Move code iterating over
linker input bfds..
* section.c (bfd_get_next_section_by_name): ..to here. Add ibfd param.
(bfd_get_linker_section): Adjust bfd_get_next_section_by_name call.
* tekhex.c (first_phase): Likewise.
* elflink.c (bfd_elf_gc_sections): Likewise.
* bfd-in2.h: Regenerate.
ld/
PR ld/19162
* emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Check flags
before calling _bfd_elf_match_sections_by_type. Merge flags for
any other input sections that might match a new output section to
decide placement.
bfd * bfd-in2.h: Regenerate.
* bfd-in.h (bfd_arm_stm32l4xx_fix): New enum. Specify how
STM32L4XX instruction scanning should be done.
(bfd_elf32_arm_set_stm32l4xx_fix)
(bfd_elf32_arm_stm32l4xx_erratum_scan)
(bfd_elf32_arm_stm32l4xx_fix_veneer_locations): Add prototypes.
(bfd_elf32_arm_set_target_relocs): Add stm32l4xx fix type argument
to prototype.
* elf32-arm.c (STM32L4XX_ERRATUM_VENEER_SECTION_NAME)
(STM32L4XX_ERRATUM_VENEER_ENTRY_NAME): Define macros.
(elf32_stm32l4xx_erratum_type): New enum.
(elf32_stm32l4xx_erratum_list): New struct. List of veneers or
jumps to veneers.
(_arm_elf_section_data): Add stm32l4xx_erratumcount,
stm32l4xx_erratumlist.
(elf32_arm_link_hash_table): Add stm32l4xx_erratum_glue_size,
stm32l4xx_fix and num_stm32l4xx_fixes fields.
(ctz): New function.
(popcount): New function.
(elf32_arm_link_hash_table_create): Initialize stm32l4xx_fix.
(put_thumb2_insn): New function.
(STM32L4XX_ERRATUM_LDM_VENEER_SIZE): Define. Size of a veneer for
LDM instructions.
(STM32L4XX_ERRATUM_VLDM_VENEER_SIZE): Define. Size of a veneer for
VLDM instructions.
(bfd_elf32_arm_allocate_interworking_sections): Initialise erratum
glue section.
(record_stm32l4xx_erratum_veneer) : New function. Create a single
veneer, and its associated symbols.
(bfd_elf32_arm_add_glue_sections_to_bfd): Add STM32L4XX erratum glue.
(bfd_elf32_arm_set_stm32l4xx_fix): New function. Set the type of
erratum workaround required.
(bfd_elf32_arm_stm32l4xx_fix_veneer_locations): New function. Find
out where veneers and branches to veneers have been placed in
virtual memory after layout.
(is_thumb2_ldmia): New function.
(is_thumb2_ldmdb): Likewise.
(is_thumb2_vldm ): Likewise.
(stm32l4xx_need_create_replacing_stub): New function. Decide if a
veneer must be emitted.
(bfd_elf32_arm_stm32l4xx_erratum_scan): Scan the sections of an
input BFD for potential erratum-triggering insns. Record results.
(bfd_elf32_arm_set_target_relocs): Set stm32l4xx_fix field in
global hash table.
(elf32_arm_size_dynamic_sections): Collect glue information.
(create_instruction_branch_absolute): New function.
(create_instruction_ldmia): Likewise.
(create_instruction_ldmdb): Likewise.
(create_instruction_mov): Likewise.
(create_instruction_sub): Likewise.
(create_instruction_vldmia): Likewise.
(create_instruction_vldmdb): Likewise.
(create_instruction_udf_w): Likewise.
(create_instruction_udf): Likewise.
(push_thumb2_insn32): Likewise.
(push_thumb2_insn16): Likewise.
(stm32l4xx_fill_stub_udf): Likewise.
(stm32l4xx_create_replacing_stub_ldmia): New function. Expands the
replacing stub for ldmia instructions.
(stm32l4xx_create_replacing_stub_ldmdb): Likewise for ldmdb.
(stm32l4xx_create_replacing_stub_vldm): Likewise for vldm.
(stm32l4xx_create_replacing_stub): New function. Dispatches the
stub emission to the appropriate functions.
(elf32_arm_write_section): Output veneers, and branches to veneers.
ld * ld.texinfo: Description of the STM32L4xx erratum workaround.
* emultempl/armelf.em (stm32l4xx_fix): New.
(arm_elf_before_allocation): Choose the type of fix, scan for
erratum.
(gld${EMULATION_NAME}_finish): Fix veneer locations.
(arm_elf_create_output_section_statements): Propagate
stm32l4xx_fix value.
(PARSE_AND_LIST_PROLOGUE): Define OPTION_STM32L4XX_FIX.
(PARSE_AND_LIST_LONGOPTS): Add entry for handling
--fix-stm32l4xx-629360.
(PARSE_AND_LIST_OPTION): Add entry for helping on
--fix-stm32l4xx-629360.
(PARSE_AND_LIST_ARGS_CASES): Treat OPTION_STM32L4XX_FIX.
tests * ld-arm/arm-elf.exp (armelftests_common): Add STM32L4XX
tests.
* ld-arm/stm32l4xx-cannot-fix-far-ldm.d: New.
* ld-arm/stm32l4xx-cannot-fix-far-ldm.s: Likewise.
* ld-arm/stm32l4xx-cannot-fix-it-block.d: Likewise.
* ld-arm/stm32l4xx-cannot-fix-it-block.s: Likewise.
* ld-arm/stm32l4xx-fix-all.d: Likewise.
* ld-arm/stm32l4xx-fix-all.s: Likewise.
* ld-arm/stm32l4xx-fix-it-block.d: Likewise.
* ld-arm/stm32l4xx-fix-it-block.s: Likewise.
* ld-arm/stm32l4xx-fix-ldm.d: Likewise.
* ld-arm/stm32l4xx-fix-ldm.s: Likewise.
* ld-arm/stm32l4xx-fix-vldm.d: Likewise.
* ld-arm/stm32l4xx-fix-vldm.s: Likewise.
Symbol symbol defined by an assignment in a linker script has type
bfd_link_hash_new. elf_i386_convert_load and elf_x86_64_convert_load
should check bfd_link_hash_new to see if a symbol is defined by a linker
script.
bfd/
PR ld/19175
* elf32-i386.c (elf_i386_convert_load): Check bfd_link_hash_new
instead of calling bfd_link_get_defined_symbol.
* elf64-x86-64.c (elf_x86_64_convert_load): Likewise. Skip
relocation overflow for bfd_link_hash_new.
* linker.c (bfd_link_get_defined_symbol): Removed.
* bfd-in2.h: Regenerated.
ld/testsuite/
PR ld/19175
* ld-i386/i386.exp: Run pr19175.
* ld-x86-64/x86-64.exp: Likewise.
* ld-i386/pr19175.d: New file.
* ld-i386/pr19175.s: Likewise.
* ld-i386/pr19175.t: Likewise.
* ld-x86-64/pr19175.d: Likewise.
* ld-x86-64/pr19175.s: Likewise.
* ld-x86-64/pr19175.t: Likewise.
Since __start_XXX and __stop_XXX symbols aren't defined when address
load is being converted, we need to check if there is an XXX output
section to get their section and value. This patch adds a new function,
bfd_link_get_defined_symbol, to search for the XXX output section to
check if __start_XXX and __stop_XXX symbols are defined.
bfd/
PR ld/19171
* elf32-i386.c (elf_i386_convert_load): Call
bfd_link_get_defined_symbol to check if a symbol is defined.
* elf64-x86-64.c (elf_x86_64_convert_load): Call
bfd_link_get_defined_symbol to get defined symbol section and
value.
* linker.c (bfd_link_get_defined_symbol): New function.
* bfd-in2.h: Regenerated.
ld/testsuite/
PR ld/19171
* ld-i386/lea1.s: Add tests for address load of __start_XXX
and __stop_XXX.
* ld-i386/mov1.s: Likewise.
* ld-x86-64/lea1.s: Likewise.
* ld-x86-64/mov1.s: Likewise.
* ld-i386/lea1a.d: Updated.
* ld-i386/lea1b.d: Likewise.
* ld-i386/lea1c.d: Likewise.
* ld-i386/mov1a.d: Likewise.
* ld-i386/mov1b.d: Likewise.
* ld-x86-64/lea1a.d: Likewise.
* ld-x86-64/lea1b.d: Likewise.
* ld-x86-64/lea1c.d: Likewise.
* ld-x86-64/lea1d.d: Likewise.
* ld-x86-64/lea1e.d: Likewise.
* ld-x86-64/lea1f.d: Likewise.
* ld-x86-64/mov1a.d: Likewise.
* ld-x86-64/mov1b.d: Likewise.
* ld-x86-64/mov1c.d: Likewise.
* ld-x86-64/mov1d.d: Likewise.
This patch adds support for the R_X86_64_GOTPCRELX and
R_X86_64_REX_GOTPCRELX relocations proposed in
https://groups.google.com/forum/#!topic/x86-64-abi/n9AWHogmVY0
to gas and ld. It updates gas to generate R_X86_64_GOTPCRELX,
R_X86_64_REX_GOTPCRELX if there is a REX prefix, relocation for memory
operand, foo@GOTPCREL(%rip). With the locally defined symbol, foo, we
convert
mov foo@GOTPCREL(%rip), %reg
to
lea foo(%rip), %reg
and convert
call/jmp *foo@GOTPCREL(%rip)
to
nop call foo/jmp foo nop
When PIC is false, convert
test %reg, foo@GOTPCREL(%rip)
to
test $foo, %reg
and convert
binop foo@GOTPCREL(%rip), %reg
to
binop $foo, %reg
where binop is one of adc, add, and, cmp, or, sbb, sub, xor instructions.
bfd/
* elf64-x86-64.c: Include opcode/i386.h.
(x86_64_elf_howto_table): Add R_X86_64_GOTPCRELX and
R_X86_64_REX_GOTPCRELX.
(R_X86_64_standard): Replace R_X86_64_PLT32_BND with
R_X86_64_REX_GOTPCRELX.
(x86_64_reloc_map): Add BFD_RELOC_X86_64_GOTPCRELX and
BFD_RELOC_X86_64_REX_GOTPCRELX.
(need_convert_mov_to_lea): Renamed to ...
(need_convert_load): This.
(elf_x86_64_check_relocs): Handle R_X86_64_GOTPCRELX and
R_X86_64_REX_GOTPCRELX. Replace need_convert_mov_to_lea with
need_convert_load.
(elf_x86_64_gc_sweep_hook): Handle R_X86_64_GOTPCRELX and
R_X86_64_REX_GOTPCRELX.
(elf_x86_64_size_dynamic_sections): Likewise.
(elf_x86_64_relocate_section): Likewise.
(elf_x86_64_convert_mov_to_lea): Renamed to ...
(elf_x86_64_convert_load): This. Replace need_convert_mov_to_lea
with need_convert_load. Support R_X86_64_GOTPCRELX and
R_X86_64_REX_GOTPCRELX transformations.
* reloc.c (BFD_RELOC_X86_64_GOTPCRELX): New.
(BFD_RELOC_X86_64_REX_GOTPCRELX): Likewise.
* bfd-in2.h: Regenerated.
* libbfd.h: Likewise.
gas/
* config/tc-i386.c (tc_i386_fix_adjustable): Handle
BFD_RELOC_X86_64_GOTPCRELX and BFD_RELOC_X86_64_REX_GOTPCRELX.
(tc_gen_reloc): Likewise.
(i386_validate_fix): Generate BFD_RELOC_X86_64_GOTPCRELX or
BFD_RELOC_X86_64_REX_GOTPCRELX if fx_tcbit2 is set.
* config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Also return
true for BFD_RELOC_X86_64_GOTPCRELX and
BFD_RELOC_X86_64_REX_GOTPCRELX.
gas/testsuite/
* gas/i386/i386.exp: Run x86-64-gotpcrel.
* gas/i386/x86-64-gotpcrel.d: New file.
* gas/i386/x86-64-gotpcrel.s: Likewise.
* gas/i386/ilp32/x86-64-gotpcrel.d: Likewise.
* gas/i386/x86-64-localpic.d: Replace R_X86_64_GOTPCREL with
R_X86_64_REX_GOTPCRELX.
* gas/i386/ilp32/x86-64-localpic.d: Likewise.
include/elf/
* x86-64.h (R_X86_64_GOTPCRELX): New.
(R_X86_64_REX_GOTPCRELX): Likewise.
ld/testsuite/
* ld-ifunc/ifunc-5r-local-x86-64.d: Replace R_X86_64_GOTPCREL
with R_X86_64_REX_GOTPCRELX.
* ld-x86-64/plt-main1.rd: Likewise.
* ld-x86-64/plt-main3.rd: Likewise.
* ld-x86-64/plt-main4.rd: Likewise.
* ld-x86-64/gotpcrel1.dd: New file.
* ld-x86-64/gotpcrel1.out: Likewise.
* ld-x86-64/gotpcrel1a.S: Likewise.
* ld-x86-64/gotpcrel1b.c: Likewise.
* ld-x86-64/gotpcrel1c.c: Likewise.
* ld-x86-64/gotpcrel1d.S: Likewise.
* ld-x86-64/load1.s: Likewise.
* ld-x86-64/load1a.d: Likewise.
* ld-x86-64/load1b.d: Likewise.
* ld-x86-64/load1c.d: Likewise.
* ld-x86-64/load1d.d: Likewise.
* ld-x86-64/x86-64.exp: Run load1a, load1b, load1c and load1d
tests. Run gotpcrel1 test.
This patch adds support for the R_386_GOT32X relocation proposed in
https://groups.google.com/forum/#!topic/ia32-abi/GbJJskkid4I
to gas and ld. It updates gas to generate R_386_GOT32X relocation for
memory operand, foo@GOT[(%reg)]. We must encode "mov foo@GOT, %eax"
with the 0x8b opcode, instead of the 0xb8 opcode, so that it can be
transformed to "lea foo, %eax". With the locally defined symbol, foo,
we convert
mov foo@GOT[(%reg1)], %reg2
to
lea foo[@GOTOFF(%reg1)], %reg2
and convert
call/jmp *foo@GOT[(%reg)]
to
nop call foo/jmp foo nop
When PIC is false, convert
test %reg1, foo@GOT[(%reg2)]
to
test $foo, %reg1
and convert
binop foo@GOT[(%reg1)], %reg2
to
binop $foo, %reg2
where binop is one of adc, add, and, cmp, or, sbb, sub, xor instructions.
bfd/
* elf32-i386.c: Include opcode/i386.h.
(elf_howto_table): Add R_386_GOT32X.
(R_386_ext2): Replace R_386_IRELATIVE with R_386_GOT32X.
(elf_i386_reloc_type_lookup): Handle BFD_RELOC_386_GOT32X.
(need_convert_mov_to_lea): Renamed to ...
(need_convert_load): This.
(elf_i386_check_relocs): Handle R_386_GOT32X. Replace
need_convert_mov_to_lea with need_convert_load.
(elf_i386_gc_sweep_hook): Handle R_386_GOT32X.
(elf_i386_size_dynamic_sections): Likewise.
(elf_i386_relocate_section): Likewise.
(elf_i386_convert_mov_to_lea): Renamed to ...
(elf_i386_convert_load): This. Replace need_convert_mov_to_lea
with need_convert_load. Support R_386_GOT32X transformations.
* reloc.c (BFD_RELOC_386_GOT32X): New.
* bfd-in2.h: Regenerated.
* libbfd.h: Likewise.
gas/
* config/tc-i386.c (tc_i386_fix_adjustable): Handle
BFD_RELOC_386_GOT32X.
(tc_gen_reloc): Likewise.
(match_template): Force 0x8b encoding for "mov foo@GOT, %eax".
(output_disp): Check for "call/jmp *mem", "mov mem, %reg",
"test %reg, mem" and "binop mem, %reg" where binop is one of
adc, add, and, cmp, or, sbb, sub, xor instructions. Set
fx_tcbit if the REX prefix is generated. Set fx_tcbit2 if
BFD_RELOC_386_GOT32X should be generated.
(i386_validate_fix): Generate BFD_RELOC_386_GOT32X if fx_tcbit2
is set.
gas/testsuite/
* gas/i386/got.d: New file.
* gas/i386/got.s: Likewise.
* gas/i386/i386.exp: Run got.
* gas/i386/localpic.d: Replace R_386_GOT32 with R_386_GOT32X.
* gas/i386/mixed-mode-reloc32.d: Likewise.
* gas/i386/reloc32.d: Likewise.
include/elf/
* i386.h (R_386_GOT32X): New relocation.
ld/testsuite/
* ld-i386/branch1.d: New file.
* ld-i386/branch1.s: Likewise.
* ld-i386/call1.d: Likewise.
* ld-i386/call1.s: Likewise.
* ld-i386/call2.d: Likewise.
* ld-i386/call2.s: Likewise.
* ld-i386/got1.dd: Likewise.
* ld-i386/got1.out: Likewise.
* ld-i386/got1a.S: Likewise.
* ld-i386/got1b.c: Likewise.
* ld-i386/got1c.c: Likewise.
* ld-i386/got1d.S: Likewise.
* ld-i386/jmp1.d: Likewise.
* ld-i386/jmp1.s: Likewise.
* ld-i386/jmp2.d: Likewise.
* ld-i386/jmp2.s: Likewise.
* ld-i386/load1.d: Likewise.
* ld-i386/load1.s: Likewise.
* ld-i386/load2.d: Likewise.
* ld-i386/load2.s: Likewise.
* ld-i386/load3.d: Likewise.
* ld-i386/load3.s: Likewise.
* ld-i386/load4.s: Likewise.
* ld-i386/load4a.d: Likewise.
* ld-i386/load4b.d: Likewise.
* ld-i386/load5.s: Likewise.
* ld-i386/load5a.d: Likewise.
* ld-i386/load5b.d: Likewise.
* ld-i386/load6.d: Likewise.
* ld-i386/load6.s: Likewise.
* ld-i386/i386.exp: Run branch1, call1, call2, jmp1, jmp2,
load1, load2, load3, load4a, load4b, load5a, load5b and load6
tests. Run got1 test.
We can't use the output section size to copy input section since
--interleave will shrink the output section. Instead, we change
bfd_convert_section_contents to return the updated input section
size. When we do that, we don't need to adjust the output section
size to skip gap fills.
bfd/
PR binutils/19020
* bfd.c (bfd_convert_section_contents): Add ptr_size parameter.
* bfd-in2.h: Regenerated.
binutils/
PR binutils/19020
* objcopy.c (copy_object): Don't adjust the output section size
when copying from input sections.
(copy_section): Use input section size for the copy. Get the
updated section size from bfd_convert_section_contents.
binutils/testsuite/
PR binutils/19020
* binutils-all/objcopy.exp: Run pr19020a and pr19020b.
* lib/utils-lib.exp (run_dump_test): Support binary input.
* binutils-all/pr19020.in: New file.
* binutils-all/pr19020a.d: Likewise.
* binutils-all/pr19020b.d: Likewise.
bfd/ChangeLog:
* targets.c (enum bfd_flavour): Add comment.
(bfd_flavour_name): New function.
* bfd-in2.h: Regenerate.
gdb/ChangeLog:
* findvar.c (default_read_var_value) <LOC_UNRESOLVED>: Include the
kind of minimal symbol in the error message.
* objfiles.c (objfile_flavour_name): New function.
* objfiles.h (objfile_flavour_name): Declare.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/dw2-bad-unresolved.c: New file.
* gdb.dwarf2/dw2-bad-unresolved.exp: New file.
Two organizational changes to the array of additional info kept for
sections.
1) Move group info into a per-group allocated struct, in preparation
for future changes that need per-group accounting.
2) Expand the array to include output sections, which simplifies
sizing and removes the need for a separate output section array.
* section.c (section_id): Make file scope.
(bfd_get_next_section_id): New function.
* elf64-ppc.c (struct map_stub): Remove toc_off field. Move decl.
(struct ppc_stub_hash_entry): Delete stub_sec and id_sec. Add
group. Update all uses.
(struct ppc_link_hash_table): Delete top_id, top_index, and
input_list. Add sec_info_arr_size. Rename stub_group to
sec_info, and make group info indirect. Update stub_group refs
throughout file.
(ppc_add_stub): Don't look for stub_sec on link_sec stub_group
entry.
(ppc_build_one_stub): Delete FIXME.
(ppc64_elf_setup_section_lists): Size htab->sec_info for all
sections, not just input sections. Don't create htab->input_list.
(ppc64_elf_next_input_section): Update to use sec_info union as
list pointer.
(PREV_SEC): Delete.
(group_sections): Pass "info" param rather than "htab". Iterate
over output sections rather than input_list. Use sec_info union
as list pointers. Alloc atruct map_stub, and return fail status.
* bfd-in2.h: Regenerate.
These int vars are really unsigned, so make them so.
* section.c (struct bfd_section): Make "id" and "index" unsigned.
* coff-rs6000.c (_bfd_xcoff_sizeof_headers): Adjust local var to suit.
* elf.c (elf_map_symbols): Likewise.
* elf64-ppc.c (sym_exists_at): Make "id" param unsigned.
(struct ppc_link_hash_table): Make "top_id" and "top_index" unsigned.
(ppc64_elf_setup_section_lists): Ditto for local vars.
* elf32-arm.c: Similarly to elf64-ppc.c.
* elf32-avr.c: Likewise.
* elf32-hppa.c: Likewise.
* elf32-m68hc1x.c: Likewise.
* elf32-metag.c: Likewise.
* elf32-nios2.c: Likewise.
* elfnn-aarch64.c: Likewise.
* simple.c (struct saved_offsets): Make "section_count" unsigned.
* bfd-in2.h: Regenerate.
The output SHF_COMPRESSED section size is different from input if
ELF classes of input and output aren't the same. We must adjust
the section sizes as well as the compression headers in
SHF_COMPRESSED sections when converting objects between different
ELF classes.
bfd/
PR binutils/18656
* bfd.c (bfd_convert_section_size): New function.
(bfd_convert_section_contents): Likewise.
* bfd-in2.h: Regenerated.
binutils/
2015-07-10 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/18656
* objcopy.c (setup_section): Call bfd_convert_section_size
to get the output section size.
(copy_section): Get the section size from the output section
and call bfd_get_full_section_contents to convert section
contents for output.
binutils/testsuite/
PR binutils/18656
* binutils-all/compress.exp (convert_test): New proc.
Run conversion tests between x86-64 and x32.
This promotes BFD's struct elf_build_id to the generic struct bfd_build_id,
populated when an ELF or PE BFD is read.
gdb is updated to use that, and to use the build-id to find symbols for PE files
also.
There is currently no generic way to extract the build-id from an object file,
perhaps an option to objdump to do this might make sense?
On x86_64-pc-cygwin, gdb's sepdebug.exp changes:
-# of unsupported tests 1
+# of expected passes 90
I don't seem to get consistent testsuite runs on i686-linux-gnu, but there
don't appear to be any regressions.
bfd/ChangeLog:
2015-06-10 Jon Turney <jon.turney@dronecode.org.uk>
* elf-bfd.h : Remove struct elf_build_id.
* bfd.c : Add struct bfd_build_id.
* bfd-in2.h: Regenerate.
* elf.c (elfobj_grok_gnu_build_id): Update to use bfd_build_id.
* libpei.h: Add protoype and macros for
bfd_XXi_slurp_codeview_record.
* peXXigen.c (_bfd_XXi_slurp_codeview_record): Make public
* peicode.h (pe_bfd_read_buildid): Add.
(pe_bfd_object_p): Use pe_bfd_read_buildid().
gdb/ChangeLog:
2015-06-10 Jon Turney <jon.turney@dronecode.org.uk>
* build-id.c: Don't include elf-bfd.h.
(build_id_bfd_get): Use bfd_build_id.
(build_id_verify): Ditto.
* build-id.h: Ditto.
(find_separate_debug_file_by_buildid): Ditto.
* python/py-objfile.c: Don't include elf-bfd.h.
(objfpy_get_build_id) Use bfd_build_id.
(objfpy_build_id_matches, objfpy_lookup_objfile_by_build_id): Ditto.
* coffread.c: Include build-id.h.
(coff_symfile_read): Try find_separate_debug_file_by_buildid.
gdb/doc/ChangeLog:
2015-06-10 Jon Turney <jon.turney@dronecode.org.uk>
* gdb.texinfo (Separate Debug Files): Document that PE is also
supported.
gdb/testsuite/ChangeLog:
2015-06-10 Jon Turney <jon.turney@dronecode.org.uk>
* gdb.base/sepdebug.exp: Add EXEEXT where needed.
* lib/gdb.exp (get_build_id): Teach how to extract build-id from a
PE file.
* lib/future.exp (gdb_find_objdump): Add gdb_find_objdump.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
In a SHF_COMPRESSED compressed section, the raw compressed data should
begin immediately after the compression header. This patch removes the
extra zlib header from the SHF_COMPRESSED section.
bfd/
* bfd.c (bfd_update_compression_header): Also write the zlib
header if the SHF_COMPRESSED bit cleared..
(bfd_check_compression_header): Return the uncompressed size.
* compress.c (decompress_contents): Don't skip the zlib header.
(bfd_compress_section_contents): Properly handle ELFCOMPRESS_ZLIB,
which doesn't have the zlib header.
(bfd_init_section_decompress_status): Likewise.
(bfd_get_full_section_contents): Updated.
(bfd_is_section_compressed): Likewise.
(bfd_is_section_compressed_with_header): Return the uncompressed
size.
* elf.c (_bfd_elf_make_section_from_shdr): Updated.
* bfd-in2.h: Regenerated.
binutils/
* readelf.c (uncompress_section_contents): Add a parameter for
uncompressed size. Don't check the zlib header.
(load_specific_debug_section): Updated.
binutils/testsuite/
* binutils-all/compress.exp: Replace "$OBJDUMP -s -j .debug_info"
with "$OBJDUMP -W".
* binutils-all/libdw2-compressedgabi.out: Updated.
gas/
2015-05-14 H.J. Lu <hongjiu.lu@intel.com>
* write.c (compress_debug): Don't write the zlib header, which
is handled by bfd_update_compression_header.
Bits in section flags should only be defined in bfd/section.c. This
patch moves SEC_MEP_VLIW to bfd/section.c.
bfd/
PR binutils/18316
* section.c (SEC_MEP_VLIW): New.
* bfd-in2.h: Regenerated.
include/elf/
PR binutils/18316
* mep.h (SEC_MEP_VLIW): Removed.
Change compressed input debug section name for objdump is very confusing.
But we need to change it for linker so that linker will consider the
input section as a debug section. This patch delays section rename to
elf_fake_sections for objcopy and avoids it for objdump.
bfd/
PR binutils/18209
* bfd.c (bfd): Add is_linker_input.
* elf.c (convert_debug_to_zdebug): New.
(convert_zdebug_to_debug): Likewise.
(_bfd_elf_make_section_from_shdr): Don't convert .debug_* to
.zdebug_* here. Use convert_zdebug_to_debug. Set SEC_ELF_RENAME.
(_bfd_elf_init_reloc_shdr): Pass a pointer to section name
instead of a pointer to section.
(elf_fake_sections): Rename the section name if SEC_ELF_RENAME
is set.
* section.c (SEC_ELF_RENAME): New.
* bfd-in2.h: Regenerated.
binutils/
PR binutils/18209
* objcopy.c (setup_section): Copy compress status.
binutils/testsuite/
PR binutils/18209
* binutils-all/compress.exp: Replace dw2-3.W with dw2-3gabi.W
on zlib-gabi output.
* binutils-all/dw2-1.W: Convert section names to .zdebug_*.
* binutils-all/dw2-3.W: Likewise.
* binutils-all/objdump.W: Likewise.
* binutils-all/dw2-3gabi.W: New file.
ld/
PR binutils/18209
* ldfile.c (ldfile_try_open_bfd): Set is_linker_input to 1.
This patch adds --compress-debug-sections=[none|zlib|zlib-gnu|zlib-gabi]
to ld for ELF targets to support generating compressed DWARF debug
sections. We always generate .zdebug_* section since section names have
been finalized and they can't be changed easily when compression is
being performed.
bfd/
* bfd-in.h (compressed_debug_section_type): New.
* compress.c (bfd_compress_section_contents): Add an argument
for linker write compression and always generate .zdebug_*
section when linking.
(bfd_init_section_compress_status): Pass FALSE to
bfd_compress_section_contents.
(bfd_compress_section): New function.
* elf.c (elf_fake_sections): For linking, set SEC_ELF_COMPRESS
on DWARF debug sections if COMPRESS_DEBUG is set and rename
section if COMPRESS_DEBUG_GABI_ZLIB isn't set.
(assign_file_positions_for_non_load_sections): Set sh_offset
to -1 if SEC_ELF_COMPRESS is set.
(assign_file_positions_except_relocs): Likwise.
(_bfd_elf_assign_file_positions_for_relocs): Renamed to ...
(_bfd_elf_assign_file_positions_for_non_load): This. Change
return time to bfd_boolean. Compress the section if
SEC_ELF_COMPRESS is set.
(_bfd_elf_write_object_contents): Updated.
(_bfd_elf_set_section_contents): Write section contents to
the buffer if SEC_ELF_COMPRESS is set.
* merge.c: Include "elf-bfd.h".
(sec_merge_emit): Add arguments for contents and offset. Write
to contents with offset if contents isn't NULL.
(_bfd_write_merged_section): Write section contents to the
buffer if SEC_ELF_COMPRESS is set. Pass contents and
output_offset to sec_merge_emit.
* elflink.c (bfd_elf_final_link): Allocate the buffer for
output section contents if SEC_ELF_COMPRESS is set.
* section.c (SEC_ELF_COMPRESS): New.
* bfd-in2.h: Regenerated.
gas/
* as.h (compressed_debug_section_type): Removed.
include/
* bfdlink.h (bfd_link_info): Add compress_debug.
ld/
* ld.texinfo: Document --compress-debug-sections=.
* ldmain.c (main): Set BFD_COMPRESS on output_bfd if
COMPRESS_DEBUG is set. Set BFD_COMPRESS_GABI on output_bfd
for COMPRESS_DEBUG_GABI_ZLIB.
* lexsup.c (elf_static_list_options): Add
--compress-debug-sections=.
* emultempl/elf32.em (OPTION_COMPRESS_DEBUG): New.
(xtra_long): Add "compress-debug-sections".
(gld${EMULATION_NAME}_handle_option): Handle
OPTION_COMPRESS_DEBUG.
ld/testsuite/
* ld-elf/compress.exp (build_tests): Add tests for
--compress-debug-sections=.
(run_tests): Likewise.
Add additonal tests for --compress-debug-sections=.
* ld-elf/gabiend.rt: New file.
* ld-elf/gabinormal.rt: Likewise.
* ld-elf/gnubegin.rS: Likewise.
* ld-elf/gnunormal.rS: Likewise.
* ld-elf/zlibbegin.rS: Likewise.
* ld-elf/zlibnormal.rS: Likewise.
This patch adds --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}
options to gas and objcopy for ELF files. They control how DWARF debug
sections are compressed. --compress-debug-sections=none is equivalent to
--nocompress-debug-sections. --compress-debug-sections=zlib and
--compress-debug-sections=zlib-gnu are equivalent to
--compress-debug-sections. --compress-debug-sections=zlib-gabi compresses
DWARF debug sections with SHF_COMPRESSED from the ELF ABI. No linker
changes are required to support SHF_COMPRESSED.
bfd/
* archive.c (_bfd_get_elt_at_filepos): Also copy BFD_COMPRESS_GABI
bit.
* bfd.c (bfd::flags): Increase size to 18 bits.
(BFD_COMPRESS_GABI): New.
(BFD_FLAGS_SAVED): Add BFD_COMPRESS_GABI.
(BFD_FLAGS_FOR_BFD_USE_MASK): Likewise.
(bfd_update_compression_header): New fuction.
(bfd_check_compression_header): Likewise.
(bfd_get_compression_header_size): Likewise.
(bfd_is_section_compressed_with_header): Likewise.
* compress.c (MAX_COMPRESSION_HEADER_SIZE): New.
(bfd_compress_section_contents): Return the uncompressed size if
the full section contents is compressed successfully. Support
converting from/to .zdebug* sections.
(bfd_get_full_section_contents): Call
bfd_get_compression_header_size to get compression header size.
(bfd_is_section_compressed): Renamed to ...
(bfd_is_section_compressed_with_header): This. Add a pointer
argument to return compression header size.
(bfd_is_section_compressed): Use it.
(bfd_init_section_decompress_status): Call
bfd_get_compression_header_size to get compression header size.
Return FALSE if uncompressed section size is 0.
* elf.c (_bfd_elf_make_section_from_shdr): Support converting
from/to .zdebug* sections.
* bfd-in2.h: Regenerated.
binutils/
* objcopy.c (do_debug_sections): Add compress_zlib,
compress_gnu_zlib and compress_gabi_zlib.
(copy_options): Use optional_argument on compress-debug-sections.
(copy_usage): Update --compress-debug-sections.
(copy_file): Handle compress_zlib, compress_gnu_zlib and
compress_gabi_zlib.
(copy_main): Handle
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
* doc/binutils.texi: Document
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
binutils/testsuite/
* compress.exp: Add tests for
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
* binutils-all/dw2-3.rS: New file.
* binutils-all/dw2-3.rt: Likewise.
* binutils-all/libdw2-compressedgabi.out: Likewise.
gas/
* as.c (show_usage): Update --compress-debug-sections.
(std_longopts): Use optional_argument on compress-debug-sections.
(parse_args): Handle
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
* as.h (compressed_debug_section_type): New.
(flag_compress_debug): Change type to compressed_debug_section_type.
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
* write.c (compress_debug): Set BFD_COMPRESS_GABI for
--compress-debug-sections=zlib-gabi. Call
bfd_get_compression_header_size to get compression header size.
Don't rename section name for --compress-debug-sections=zlib-gabi.
* config/tc-i386.c (compressed_debug_section_type): Set to
COMPRESS_DEBUG_ZLIB.
* doc/as.texinfo: Document
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
gas/testsuite/
* gas/i386/dw2-compressed-1.d: New file.
* gas/i386/dw2-compressed-2.d: Likewise.
* gas/i386/dw2-compressed-3.d: Likewise.
* gas/i386/x86-64-dw2-compressed-2.d: Likewise.
* gas/i386/i386.exp: Run dw2-compressed-2, dw2-compressed-1,
dw2-compressed-3 and x86-64-dw2-compressed-2.
ld/testsuite/
* ld-elf/compress.exp: Add a test for
--compress-debug-sections=zlib-gabi.
(build_tests): Add 2 tests for --compress-debug-sections=zlib-gabi.
(run_tests): Likewise.
Verify linker output with zlib-gabi compressed debug input.
* ld-elf/compressed1a.d: New file.
* ld-elf/compressed1b.d: Likewise.
* ld-elf/compressed1c.d: Likewise.
Some early revisions of the Cortex-A53 have an erratum (843419). The
details of the erratum are quite complex and involve dynamic
conditions. For the purposes of the workaround we have simplified the
static conditions to an ADRP in the last two instructions of a 4KByte
page, followed within four instructions by a load/store dependent on
the ADRP.
This patch adds support to conservatively scan for and workaround
Cortex A53 erratum 843419. There are two different workaround
strategies used. The first is to rewrite ADRP instructions which form
part of an erratum sequence with an ADR instruction. In situations
where the ADR provides insufficient offset the dependent load or store
instruction from the sequence is moved to a stub section and branches
are inserted from the original sequence to the relocated instruction
and back again.
Stub section sizes are rounded up to a multiple of 4096 in order to
ensure that the act of inserting work around stubs does not create
more errata sequences.
Workaround stubs are always inserted into the stub section associated
with the input section containing the erratum sequence. This ensures
that the fully relocated form of the veneered load store instruction
is available at the point in time when the stub section is written.
bfd * elf32-v850.c (v850_set_note): New function. Creates a Renesas
style note entry.
(v850_elf_make_note_section): New function. Creates a note
section.
(v850_elf_create_sections): New function. Create a note section
if one is not already present.
(v850_elf_set_note): New function. Adds a note to a bfd.
(v850_elf_copy_private_bfd_data): New function. Copies V850
notes.
(v850_elf_merge_notes): New function. Merges V850 notes.
(print_v850_note): New function. Displays a V850 note.
(v850_elf_print_notes): New function. Displays all notes attached
to a bfd.
(v850_elf_merge_private_bfd_data): Call v850_elf_merge_notes.
(v850_elf_print_private_bfd_data): Call v850_elf_print_notes.
(v850_elf_fake_sections): Set the type of the V850 note section.
* bfd-in.h (v850_elf_create_sections): Add prototype.
(v850_elf_set_note): Add prototype.
* bfd-in2.h: Regenerate.
binutils* readelf.c (get_machine_flags): Remove deprecated V850 machine
flags.
(get_v850_section_type_name): New function. Handles V850 special
sections.
(get_section_type_name): Add support for V850.
(get_v850_elf_note_type): New function. Returns the name of a
V850 note.
(print_v850_note): New function. Prints a V850 note.
(process_v850_notes): New function. Prints V850 notes.
(process_note_sections): Add support for V850.
binutils/testsute
* binutils-all/objcopy.exp: Skip the strip-10 test for the V850.
gas * config/tc-v850.c (soft_float): New variable.
(v850_data_8): New variable.
(md_show_usage): Add -msoft-float/-mhard-float.
(md_parse_option): Likewise.
(md_begin): Set the default value of soft_float.
(v850_md_end): New function. Creates a note section.
* config/tc-v850.h (md_end): Define.
* doc/c-v850.texi: Document -msoft-float/-mhard-float.
gas/testsuite
* gas/elf/elf.exp: Add special version of the section2 test for
the V850.
* gas/elf/section2.e-v850: New file.
include/elf
* v850.h (EF_RH850_SIMD): Delete deprecated flag.
(EF_RH850_CACHE): Likewise.
(EF_RH850_MMU): Likewise.
(EF_RH850_DATA_ALIGN8): Likewise.
(SHT_RENESAS_IOP): Fix typo in name.
(SHT_RENESAS_INFO): Define.
(V850_NOTE_SECNAME): Define.
(SIZEOF_V850_NOTE): Define.
(V850_NOTE_NAME): Define.
(enum v850_notes): New enum.
(NUM_V850_NOTES): Define.
ld/ChangeLog
2015-02-24 Nick Clifton <nickc@redhat.com>
* Makefile.am (ev850.c): Add dependency upon
$(srcdir)/emultempl/v850elf.em.
(ev850_rh850.c): Likewise.
* Makefile.in: Regenerate.
* emultempl/v850elf.em: New file.
* emulparams/v850.sh (EXTRA_EM_FILE): Define.
* emulparams/v850_rh850.sh (EXTRA_EM_FILE): Define.
* scripttempl/v850.sc: Add .note.renesas section.
* scripttempl/v850_rh850.sc: Likewise.
ld/testsuite
* ld-elf/extract-symbol-1sec.d: Expect to fail on the V850.
LTO output objects have an STT_FILE symbol using the name of the file,
a temporary file. This results in executables that can't be exactly
reproduced, so the file name needs to be dropped. We don't want to
lose all file symbols when linking a mix of lto and non-lto objects as
a file symbol can be used to figure which source file generated a
given local symbol. So lto output objects need to be marked.
I chose to mark lto output objects with a new bfd flag. This flag is
also used to fix a bug in the link-once handling; An object being
loaded after "loading_lto_outputs" is set might be one extracted from
an archive to satisfy new references from lto objects, not an lto
object itself.
The new flag is copied from archive to elements, and the same done
for no_export. This fixes a bug in that --exclude-libs doesn't work
with thin archives. I'm not completely happy with this part of the
patch and may revist this to avoid the hack in
_bfd_look_for_bfd_in_cache.
PR ld/17973
include/
* bfdlink.h (struct bfd_link_info): Delete loading_lto_outputs.
bfd/
* bfd.c (struct bfd): Add lto_output.
* linker.c (_bfd_handle_already_linked): Explicitly test for
objects added by the lto plugin.
* opncls.c (_bfd_new_bfd_contained_in): Copy lto_output and
no_export flags from archive.
* archive.c (open_nested_file): New function, setting lto_output
and no_export, extracted from..
(find_nested_archive): ..here. Flip params. Rename from
_bfd_find_nested_archive.
(_bfd_get_elt_at_filepos): Correct var typo. Use open_nested_file.
(_bfd_look_for_bfd_in_cache): Copy no_export.
* elflink.c (elf_link_add_object_symbols): Remove now unnecessary
my_archive->no_export test.
(elf_link_input_bfd): Drop existing lto_output STT_FILE syms.
Don't use the file name when adding lto_output STT_FILE sym.
* bfd-in2.h: Regenerate.
ld/
* ldlang.h (struct lang_input_statement_flags): Add lto_output.
* ldlang.c (lang_process): Don't set loading_lto_outputs.
* ldfile.c (ldfile_try_open_bfd): Transfer entry flags.lto_output
to bfd.
* plugin.c (add_input_file, add_input_library): Set flags.lto_output.
Linker plugin_maybe_claim is the interface of linker plugin support.
This patch extracts linker plugin_maybe_claim into plugin_object_p and
makes it available to BFD via a new function:
void register_ld_plugin_object_p (const bfd_target *(*) (bfd *));
bfd_plugin_object_p calls plugin_object_p registered by linker first. It
adds an enum bfd_plugin_format field and a pointer to plugin dummy BFD so
that plugin_object_p stores plugin dummy BFD to allow plugin_maybe_claim
to retrieve it later.
bfd/
PR ld/17878
* bfd.c (bfd_plugin_format): New.
(bfd): Add plugin_format and plugin_dummy_bfd.
* plugin.c (try_load_plugin): Take a pointer to bfd_boolean
argument to return TRUE if any plugin is found. Set plugin_format.
(has_plugin): New.
(bfd_plugin_target_p): New.
(bfd_plugin_specified_p): Likewise.
(bfd_plugin_target_p): Likewise.
(register_ld_plugin_object_p): Likewise.
(bfd_plugin_set_plugin): Set has_plugin.
(load_plugin): Cache try_load_plugin result.
(bfd_plugin_object_p): Try ld_plugin_object_p first. Check
plugin_format.
* plugin.h (bfd_plugin_target_p): New.
(bfd_plugin_specified_p): Likewise.
(register_ld_plugin_object_p): Likewise.
* bfd-in2.h: Regenerated.
ld/
PR ld/17878
* plugin.c: Include ../bfd/plugin.h.
(plugin_get_ir_dummy_bfd): Call bfd_create with
link_info.output_bfd instead of srctemplate. Copy BFD info
from srctemplate only if it doesn't use BFD plugin target
vector.
(plugin_load_plugins): Call register_ld_plugin_object_p with
(plugin_object_p)
(plugin_maybe_claim): Renamed to ...
(plugin_object_p): This. Return dummy BFD target vector if
input is calimed by plugin library, otherwise return NULL.
Update plugin_format and plugin_dummy_bfd.
(plugin_maybe_claim): New. Use plugin_object_p.
xx
binutils:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* readelf.c (print_mips_isa_ext): Print the value of Octeon3.
gas:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* config/tc-mips.c (CPU_IS_OCTEON): Handle CPU_OCTEON3.
(mips_cpu_info_table): Octeon3 enables virt ase.
* doc/c-mips.texi: Document octeon3 as an acceptable value for
-march=.
gas/testsuite:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* gas/mips/mips.exp: Add support for Octeon3 architecture.
Also add in support for running Octeon3 tests.
* gas/mips/octeon3.d: New test.
* gas/mips/octeon3.s: New test source.
opcodes:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* mips-dis.c (mips_arch_choices): Add octeon3.
* mips-opc.c (IOCT): Include INSN_OCTEON3.
(IOCT2): Likewise.
(IOCT3): New define.
(IVIRT): New define.
(mips_builtin_opcodes): Add dmfgc0, dmtgc0, hypcall, mfgc0, mtgc0,
tlbinv, tlbinvf, tlbgr, tlbgwi, tlbginv, tlbginvf, tlbgwr, tlbgp, tlti
IVIRT instructions.
Extend mtm0, mtm1, mtm2, mtp0, mtp1, mtp2 instructions to take another
operand for IOCT3.
bfd:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* archures.c: Add octeon3 for mips target.
* bfd-in2.h: Regenerate.
* bfd/cpu-mips.c: Define I_mipsocteon3.
nfo_struct): Add octeon3 support.
* bfd/elfxx-mips.c: (_bfd_elf_mips_mach): Add support for
octeon3.
(mips_set_isa_flags): Add support for octeon3.
(bfd_mips_isa_ext): Add bfd_mach_mips_octeon3.
(mips_mach_extensions): Make bfd_mach_mips_octeon3 an
extension of bfd_mach_mips_octeon2.
(print_mips_isa_ext): Print the value of Octeon3.
2014-10-22 Tejas Belagod <tejas.belagod@arm.com>
bfd/
* bfd-in.h (bfd_elf64_aarch64_set_options): Add a parameter.
* bfd-in2.h (bfd_elf64_aarch64_set_options): Likewise.
* elfnn-aarch64.c (aarch64_erratum_835769_stub): New.
(elf_aarch64_stub_type): Add new type
aarch64_stub_erratum_835769_veneer.
(elf_aarch64_stub_hash_entry): New fields for erratum 835769.
(aarch64_erratum_835769_fix): New data struct to record erratum
835769.
(elf_aarch64_link_hash_table: Global flags for 835769.
(aarch64_build_one_stub): Add case for 835769.
(aarch64_size_one_stub): Likewise.
(aarch64_mem_op_p, aarch64_mlxl_p,
aarch64_erratum_sequence,erratum_835769_scan):
New. Decode and scan functions for erratum 835769.
(elf_aarch64_create_or_find_stub_sec): New.
(elfNN_aarch64_size_stubs): Look for erratum 835769 and record
them.
(bfd_elfNN_aarch64_set_options: Set global flag for 835769.
(erratum_835769_branch_to_stub_data,
make_branch_to_erratum_835769_stub):New. Connect up all the
erratum stubs to occurances by branches.
(elfNN_aarch64_write_section): New hook.
(aarch64_map_one_stub): Output erratum stub symbol.
(elfNN_aarch64_size_dynamic_sections): Init mapping symbol
information for erratum 835769.
(elf_backend_write_section): Define.
ld/
* emultempl/aarch64elf.em: Add command-line option for erratum
835769.
ld/testsuite/
* ld-aarch64/aarch64-elf.exp (aarch64elftests): Drive erratum
835769 tests.
* ld-aarch64/erratum835769.d: New.
* ld-aarch64/erratum835769.s: New.
Refactor each relaxation pattern to raise the maintainability.
In origin, all patterns is analysed in nds32_elf_relax_section,
so it is hard to debug and maintain. Therefore, we classify all
patterns into different functions in this patch.
Moreover, we adjust all optimizations into nds32_elf_relax_section
to take these optimizations in turn. This can promise all relaxation
being done after calling gld${EMULATION_NAME}_after_allocation.
bfd/
* aoutx.h (NAME (aout, machine_type)): Add mips32r6 and mips64r6.
* archures.c (bfd_architecture): Likewise.
* bfd-in2.h (bfd_architecture): Likewise.
(bfd_reloc_code_real): Add relocs BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and
BFD_RELOC_MIPS_19_PCREL_S2.
* cpu-mips.c (arch_info_struct): Add mips32r6 and mips64r6.
* elf32-mips.c: Define relocs R_MIPS_PC21_S2, R_MIPS_PC26_S2
R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16.
(mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
* elf64-mips.c: Define REL, and RELA relocations R_MIPS_PC21_S2,
R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16
and R_MIPS_PCLO16.
(mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
* elfn32-mips.c: Likewise.
* elfxx-mips.c (MIPSR6_P): New define.
(mipsr6_exec_plt_entry): New array.
(hi16_reloc_p): Add support for R_MIPS_PCHI16.
(lo16_reloc_p): Add support for R_MIPS_PCLO16.
(aligned_pcrel_reloc_p): New function.
(mips_elf_relocation_needs_la25_stub): Add support for relocs:
R_MIPS_PC21_S2 and R_MIPS_PC26_S2.
(mips_elf_calculate_relocation): Add support for relocs:
R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2,
R_MIPS_PCHI16 and R_MIPS_PCLO16.
(_bfd_elf_mips_mach): Add support for mips32r6 and mips64r6.
(mips_elf_add_lo16_rel_addend): Add support for R_MIPS_PCHI16.
(_bfd_mips_elf_check_relocs): Add support for relocs:
R_MIPS_PC21_S2 and R_MIPS_PC26_S2.
(_bfd_mips_elf_relocate_section): Add a check for unaligned
pc relative relocs.
(_bfd_mips_elf_finish_dynamic_symbol): Add support for MIPS r6
plt entry.
(mips_set_isa_flags): Add support for mips32r6 and mips64r6.
(_bfd_mips_elf_print_private_bfd_data): Likewise.
(mips_32bit_flags_p): Add support for mips32r6.
* libbfd.h (bfd_reloc_code_real_names): Add entries for
BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2,
BFD_RELOC_MIPS_18_PCREL_S3 and BFD_RELOC_MIPS_19_PCREL_S2.
* reloc.c: Document relocs BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and
BFD_RELOC_MIPS_19_PCREL_S2.
binutils/
* readelf.c (get_machine_flags): Add support for mips32r6 and
mips64r6.
elfcpp/
* mips.h (E_MIPS_ARCH_32R6, E_MIPS_ARCH_64R6): New enum constants.
gas/
* config/tc-mips.c (mips_nan2008): New static global.
(mips_flag_nan2008): Removed.
(LL_SC_FMT): New define.
(COP12_FMT): Updated.
(ISA_IS_R6): New define.
(ISA_HAS_64BIT_REGS): Add mips64r6.
(ISA_HAS_DROR): Likewise.
(ISA_HAS_64BIT_FPRS): Add mips32r6 and mips64r6.
(ISA_HAS_ROR): Likewise.
(ISA_HAS_ODD_SINGLE_FPR): Likewise.
(ISA_HAS_MXHC1): Likewise.
(hilo_interlocks): Likewise.
(md_longopts): Likewise.
(ISA_HAS_LEGACY_NAN): New define.
(options): Add OPTION_MIPS32R6 and OPTION_MIPS64R6.
(mips_ase): Add field rem_rev.
(mips_ases): Updated to add which ISA an ASE was removed in.
(mips_isa_rev): Add support for mips32r6 and mips64r6.
(mips_check_isa_supports_ase): Add support to check if an ASE
has been removed in the specified MIPS ISA revision.
(validate_mips_insn): Skip '-' character.
(macro_build): Likewise.
(mips_check_options): Prevent R6 working with fp32, mips16,
micromips, or branch relaxation.
(file_mips_check_options): Set R6 floating point registers to
64 bit. Also deal with the nan2008 option.
(limited_pcrel_reloc_p): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(operand_reg_mask): Add support for OP_SAME_RS_RT, OP_CHECK_PREV
and OP_NON_ZERO_REG.
(match_check_prev_operand): New static function.
(match_same_rs_rt_operand): New static function.
(match_non_zero_reg_operand): New static function.
(match_operand): Added entries for: OP_SAME_RS_RT, OP_CHECK_PREV
and OP_NON_ZERO_REG.
(insns_between): Added case to deal with forbidden slots.
(append_insn): Added support for relocs: BFD_RELOC_MIPS_21_PCREL_S2
and BFD_RELOC_MIPS_26_PCREL_S2.
(match_insn): Add support for operands -A, -B, +' and +". Also
skip '-' character.
(mips_percent_op): Add entries for %pcrel_hi and %pcrel_lo.
(md_parse_option): Add support for mips32r6 and mips64r6. Also
update the nan option handling.
(md_pcrel_from): Add cases for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2.
(mips_force_relocation): Prevent forced relaxation for MIPS r6.
(md_apply_fix): Add support for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(s_mipsset): Add support for mips32r6 and mips64r6.
(s_nan): Update to support the new nan2008 framework.
(tc_gen_reloc): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(mips_elf_final_processing): Updated to use the mips_nan2008.
(mips_cpu_info_table): Add entries for mips32r6 and mips64r6.
(macro): Enable ldc2, sdc2, ll, lld, swc2, sc, scd, cache, pref
macros for R6.
(mips_fix_adjustable): Make PC relative R6 relocations relative
to the symbol and not the section.
* configure.ac: Add support for mips32r6 and mips64r6.
* configure: Regenerate.
* doc/c-mips.texi: Document the -mips32r6 and -mips64r6 command line
options.
* doc/as.texinfo: Likewise.
gas/testsuite/
* gas/mips/24k-triple-stores-1.s: If testing for r6 prevent
non-supported instructions from being tested.
* gas/mips/24k-triple-stores-2.s: Likewise.
* gas/mips/24k-triple-stores-3.s: Likewise.
* gas/mips/24k-triple-stores-6.s: Likewise.
* gas/mips/beq.s: Likewise.
* gas/mips/eva.s: Likewise.
* gas/mips/ld-zero-3.s: Likewise.
* gas/mips/mips32-cp2.s: Likewise.
* gas/mips/mips32.s: Likewise.
* gas/mips/mips4.s: Likewise.
* gas/mips/add.s: Don't test the add instructions if r6, and
add padding.
* gas/mips/add.d: Check for a triple dot not a nop at the end of the
disassembly output.
* gas/mips/micromips@add.d: Likewise.
* gas/mips/mipsr6@24k-branch-delay-1.d: New file.
* gas/mips/mipsr6@24k-triple-stores-1.d: New file.
* gas/mips/mipsr6@24k-triple-stores-2-llsc.d: New file.
* gas/mips/mipsr6@24k-triple-stores-2.d: New file.
* gas/mips/mipsr6@24k-triple-stores-3.d: New file.
* gas/mips/mipsr6@24k-triple-stores-6.d: New file.
* gas/mips/mipsr6@add.d: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msingle-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msingle-float.s: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msoft-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msoft-float.s: New file.
* gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.s: New file.
* gas/mips/mipsr6@beq.d: New file.
* gas/mips/mipsr6@bge.d: New file.
* gas/mips/mipsr6@bgeu.d: New file.
* gas/mips/mipsr6@blt.d: New file.
* gas/mips/mipsr6@bltu.d: New file.
* gas/mips/mipsr6@branch-misc-1.d: New file.
* gas/mips/mipsr6@branch-misc-2-64.d: New file.
* gas/mips/mipsr6@branch-misc-2pic-64.d: New file.
* gas/mips/mipsr6@branch-misc-4-64.d: New file.
* gas/mips/mipsr6@cache.d: New file.
* gas/mips/mipsr6@eva.d: New file.
* gas/mips/mipsr6@jal-svr4pic-noreorder.d: New file.
* gas/mips/mipsr6@jal-svr4pic.d: New file.
* gas/mips/mipsr6@ld-zero-2.d: New file.
* gas/mips/mipsr6@ld-zero-3.d: New file.
* gas/mips/mipsr6@loc-swap-dis.d: New file.
* gas/mips/mipsr6@mips32-cp2.d: New file.
* gas/mips/mipsr6@mips32-imm.d: New file.
* gas/mips/mipsr6@mips32.d: New file.
* gas/mips/mipsr6@mips32r2.d: New file.
* gas/mips/mipsr6@mips4-fp.d: New file.
* gas/mips/mipsr6@mips4-fp.l: New file.
* gas/mips/mipsr6@mips4-fp.s: New file.
* gas/mips/mipsr6@mips4.d: New file.
* gas/mips/mipsr6@mips5-fp.d: New file.
* gas/mips/mipsr6@mips5-fp.l: New file.
* gas/mips/mipsr6@mips5-fp.s: New file.
* gas/mips/mipsr6@mips64.d: New file.
* gas/mips/mipsr6@msa-branch.d: New file.
* gas/mips/mipsr6@msa.d: New file.
* gas/mips/mipsr6@pref.d: New file.
* gas/mips/mipsr6@relax-swap3.d: New file.
* gas/mips/r6-64-n32.d: New file.
* gas/mips/r6-64-n64.d: New file.
* gas/mips/r6-64-removed.l: New file.
* gas/mips/r6-64-removed.s: New file.
* gas/mips/r6-64.s: New file.
* gas/mips/r6-attr-none-double.d: New file.
* gas/mips/r6-n32.d: New file.
* gas/mips/r6-n64.d: New file.
* gas/mips/r6-removed.l: New file.
* gas/mips/r6-removed.s: New file.
* gas/mips/r6.d: New file.
* gas/mips/r6.s: New file.
* gas/mips/mipsr6@mips32-dsp.d: New file.
* gas/mips/mipsr6@mips32-dspr2.d: New file.
* gas/mips/mipsr6@mips32r2-ill.l: New file.
* gas/mips/mipsr6@mips32r2-ill.s: New file.
* gas/mips/cache.s: Add r6 instruction varients.
* gas/mips/mips.exp: Add support for the mips32r6 and mips64r6
architectures. Also prevent non r6 supported tests from running.
Finally, add in support for running the new r6 tests.
(run_dump_test_arch): Add support for mipsr6 tests.
(run_list_test_arch): Add support for using files of the
form arch@testname.l .
include/elf/
* mips.h: Add relocs: R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3,
R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16.
(E_MIPS_ARCH_32R6): New define.
(E_MIPS_ARCH_64R6): New define.
include/opcode/
* mips.h (mips_operand_type): Add new entries: OP_SAME_RS_RT,
OP_CHECK_PREV and OP_NON_ZERO_REG. Add descriptions for the MIPS R6
instruction arguments: -a, -b, -d, -s, -t, -u, -v, -w, -x, -y, -A, -B,
+I, +O, +R, +:, +\, +", +;
(mips_check_prev_operand): New struct.
(INSN2_FORBIDDEN_SLOT): New define.
(INSN_ISA32R6): New define.
(INSN_ISA64R6): New define.
(INSN_UPTO32R6): New define.
(INSN_UPTO64R6): New define.
(mips_isa_table): Add INSN_UPTO32R6 and INSN_UPTO64R6.
(ISA_MIPS32R6): New define.
(ISA_MIPS64R6): New define.
(CPU_MIPS32R6): New define.
(CPU_MIPS64R6): New define.
(cpu_is_member): Add cases for CPU_MIPS32R6, and CPU_MIPS64R6.
ld/
* ldmain.c (get_emulation): Add support for -mips32r6 and -mips64r6.
opcodes/
* mips-dis.c (mips_arch_choices): Add entries for mips32r6 and
mips64r6.
(parse_mips_dis_option): Allow MSA and virtualization support for
mips64r6.
(mips_print_arg_state): Add fields dest_regno and seen_dest.
(mips_seen_register): New function.
(print_insn_arg): Refactored code to use mips_seen_register
function. Add support for OP_SAME_RS_RT, OP_CHECK_PREV and
OP_NON_ZERO_REG. Changed OP_REPEAT_DEST_REG case to print out
the register rather than aborting.
(print_insn_args): Add length argument. Add code to correctly
calculate the instruction address for pc relative instructions.
(validate_insn_args): New static function.
(print_insn_mips): Prevent jalx disassembling for r6. Use
validate_insn_args.
(print_insn_micromips): Use validate_insn_args.
all the arguments are valid.
* mips-formats.h (PREV_CHECK): New define.
* mips-opc.c (decode_mips_operand): Add support for -a, -b, -d, -s,
-t, -u, -v, -w, -x, -y, -A, -B, +I, +O, +R, +:, +\, +", +;
(RD_pc): New define.
(FS): New define.
(I37): New define.
(I69): New define.
(mips_builtin_opcodes): Add MIPS R6 instructions. Exclude recoded
MIPS R6 instructions from MIPS R2 instructions.
CODE_FRAGMENT. Also fix skip_past_newline to not skip past NUL.
* bfd-in2.h: Regenerate.
* libcoff.h: Regenerate.
doc/
* chew.c (skip_past_newline_1): New function.
(outputdots): Call it.
(skip_past_newline): Ditto.
This fixes a problem seen on powerpc64le ELFv2 when creating a
function symbol alias with ld --defsym. st_other needs to be copied
from the source symbol to the alias in order to set up the local entry
offset for the alias. I decided to make this change in the generic
ELF code rather than in elf64-ppc.c since it looks like other targets
that use st_other bits might benefit too.
bfd/
* elflink.c (_bfd_elf_copy_link_hash_symbol_type): Copy st_other
bits from source to dest.
* linker.c (_bfd_generic_copy_link_hash_symbol_type): Update comment.
* targets.c (struct bfd_target <_bfd_copy_link_hash_symbol_type>):
Likewise.
* bfd-in2.h: Regenerate.
ld/testsuite/
* ld-powerpc/defsym.s, * ld-powerpc/defsym.d: New test.
* ld-powerpc/powerpc.exp: Run it.
* elf32-avr.c: Handle R_AVR_PORT5 and R_AVR_PORT6.
* reloc.c: Add BFD_RELOC_AVR_PORT5 and BFD_RELOC_AVR_PORT6.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* avr.h: Add R_AVR_PORT5 and R_AVR_PORT6.
* config/tc-avr.c (avr_operand): Permit referring to r26-r31 by
name as [xyz][hl]. Permit using a symbol whoes name begins with
`r' to refer to a register.
Allow arbitrary expressions for the P and p operators.
(md_apply_fix): Check the BFD_RELOC_AVR_PORT5 and
BFD_RELOC_AVR_PORT6 relocations.
for better packing. Removes a field and a flag that are never set.
bfd/
* bfd.c (struct bfd): Reorganise for better packing. Delete
"ifd" field. Make "format", "direction" and "flags" bitfields.
(HAS_LOAD_PAGE): Delete, renumber following flags.
* bfd-in2.h: Regenerate.
* coff-tic4x.c: Remove HAS_LOAD_PAGE from extra flags in target vecs.
binutils/
* objdump.c (dump_bfd_header): Don't print HAS_LOAD_PAGE.
* archures.c: add avrtiny architecture for avr target.
* bfd-in2.h: Regenerate.
* cpu-avr.c (arch_info_struct): add avrtiny arch info.
* elf32-avr.c (elf_avr_howto_table): new relocation R_AVR_LDS_STS_16
added for 16 bit LDS/STS instruction of avrtiny arch.
(avr_reloc_map): reloc R_AVR_LDS_STS_16 is mapped to
BFD_RELOC_AVR_LDS_STS_16.
(bfd_elf_avr_final_write_processing): select machine number avrtiny arch.
(elf32_avr_object_p): set machine number for avrtiny arch.
* libbfd.h: Regenerate.
* reloc.c: Add documentation for BFD_RELOC_AVR_LDS_STS_16 reloc.
* config/tc-avr.c (mcu_types): Add avrtiny arch.
Add avrtiny arch devices attiny4, attiny5, attiny9, attiny10, attiny20
and attiny40.
(md_show_usage): Add avrtiny arch in usage message.
(avr_operand): validate and issue error for invalid register for avrtiny.
add new reloc exp for 16 bit lds/sts instruction.
(md_apply_fix): check 16 bit lds/sts operand for out of range and encode.
(md_assemble): check ISA for arch and issue diagnostic.
* include/elf/avr.h (E_AVR_MACH_AVRTINY): define avrtiny machine number.
(R_AVR_LDS_STS_16): define 16 bit lds/sts reloc number.
* include/opcode/avr.h (AVR_ISA_TINY): define avrtiny specific ISA.
(AVR_ISA_2xxxa): define ISA without LPM.
(AVR_ISA_AVRTINY): define avrtiny arch ISA.
Add doc for contraint used in 16 bit lds/sts.
Adjust ISA group for icall, ijmp, pop and push.
Add 16 bit lds/sts encoding and update 32 bit lds/sts constraints.
* opcodes/avr-dis.c (avr_operand): Handle constraint j for 16 bit lds/sts.
(print_insn_avr): do not select opcode if insn ISA is avrtiny and machine
is not avrtiny.
* Makefile.am (ALL_EMULATION_SOURCES): add avrtiny emulation source.
(eavrtiny.c): add rules for avrtiny emulation source.
* Makefile.in: Regenerate.
* configure.tgt: Add avrtiny to avr target emulations.
* scripttempl/avrtiny.sc: New file.
linker script template for avrtiny arch.
* emulparams/avrtiny.sh: New file.
emulation parameters for avrtiny arch.