Add support for the Xilinx XADC core used in Zynq 7000.
References:
- Zynq-7000 All Programmable SoC Technical Reference Manual
- 7 Series FPGAs and Zynq-7000 All Programmable SoC XADC
Dual 12-Bit 1 MSPS Analog-to-Digital Converter
Tested with Linux using QEMU machine xilinx-zynq-a9 with devicetree
files zynq-zc702.dtb and zynq-zc706.dtb, and kernel configuration
multi_v7_defconfig.
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[ PC changes:
* Changed macro names to match TRM where possible
* Made programmers model macro scheme consistent
* Dropped XADC_ZYNQ_ prefix on local macros
* Fix ALM field width
* Update threshold-comparison interrupts in _update_ints()
* factored out DFIFO pushes into helper. Renamed to "push/pop"
* Changed xadc_reg to 10 bits and added OOB check.
* Reduced scope of MCTL reset to just stop channel coms.
* Added dummy read data to write commands
* Changed _ to - seperators in string names and filenames
* Dropped ------------ in header comment
* Catchall'ed _update_ints() in _write handler.
* Minor whitespace changes.
* Use ZYNQ_XADC_FIFO_DEPTH instead of ARRAY_SIZE()
]
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1446909925-12201-1-git-send-email-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Firstly, enable monitor mode and PSCI, both of which are features of
this board.
In addition to PSCI, this board also uses SMC for cache maintenance
ops. This means we need a secure monitor to catch these and nop them.
Use the ARM boot board-setup feature to implement this. The SMC trap
implements the needed nop while all other traps will pen the CPU.
As a KVM CPU cannot run in secure mode, do not do the board-setup if
not running TCG. Report a warning explaining the limitation in this
case.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 0fd0d12f0fa666c86616c89447861a70dbe27312.1447007690.git.crosthwaite.peter@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This board should not support CPU model override. This allows for
easier patching of the board with being able to rely on the CPU
type being correct.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 471a61e049c7ca6e82f5ef6668889a1d518c7e00.1447007690.git.crosthwaite.peter@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a flag that when set, will cause the primary CPU to start in secure
mode, even if the overall boot is non-secure. This is useful for when
there is a board-setup blob that needs to run from secure mode, but
device and secondary CPU init should still be done as-normal for a non-
secure boot.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: d1170774d5446d715fced7739edfc61a5be931f9.1447007690.git.crosthwaite.peter@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This makes the purpose of the function clearer: it is not about the
version of QEMU that's running, but the version string exposed in the
emulated hardware.
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: John Snow <jsnow@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1446233769-7892-3-git-send-email-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use mp_affinity of ARMCPU as the CPU MPIDR instead of the CPU index.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1446285001-7316-1-git-send-email-zhaoshenglong@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When booting VM with GICv3, the kernel needs GICC ACPI subtable to
initialize the CPUs, e.g. MPIDR information. This adds GICC ACPI
subtable for GICv3, but set GICC base address only when gic_version == 2
since it donesn't need GICC base address for GICv3.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1446131773-5018-1-git-send-email-shannon.zhao@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to ACPI specification 6.2.17 _CCA (Cache Coherency Attribute)
this attribute is compulsory on ARM systems. Add this attribute to
the PCI host bridges as required.
Without this the kernel will produce the error
[Firmware Bug]: PCI device 0000:00:00.0 fail to setup DMA.
Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
Message-id: 1446460786-13663-1-git-send-email-graeme.gregory@linaro.org
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add GPIO in for the stellaris board which calls
qemu_system_reset_request() on reset request.
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Change armv7m_init to return the DeviceState* for the NVIC.
This allows access to all GPIO blocks, not just the IRQ inputs.
Move qdev_get_gpio_in() calls out of armv7m_init() into
board code for stellaris and stm32f205 boards.
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a Linux-specific pre-boot routine that matches the device-
specific bootloaders behaviour. This is needed for modern Linux that
expects the ARM PLL in SLCR to be a more even value (not 26).
Cc: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 9a9025ea65572586b50dca4e5819032e3c436d64.1446182614.git.crosthwaite.peter@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add an API for boards to inject their own preboot software (or
firmware) sequence.
The software then returns to the bootloader via the link register. This
allows boards to do their own little bits of firmware setup without
needed to replace the bootloader completely (which is the requirement
for existing firmware support).
The blob is loaded by a callback if and only if doing a linux boot
(similar to the existing write_secondary support).
Rewrite the comment for the primary boot blob.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 070295644c6ac84696d743913296e8cfefb48c15.1446182614.git.crosthwaite.peter@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These comments start immediately after the current longest name in the
list. Tab them out to the next tab stop to give a little breathing room
and prepare for FIXUP_BOARD_SETUP which will require more indent.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: b9b9bb8f1c307c1ef8a3f26ff1f34fabb34b332e.1446182614.git.crosthwaite.peter@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add two SYSBUS_SDHCI devices for xlnx-zynqmp
Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We should always go through VirtBoardInfo when we need the memmap.
To avoid using a15memmap directly, in this case, we need to defer
the max-cpus check from class init time to instance init time. In
class init we now use MAX_CPUMASK_BITS for max_cpus initialization,
which is the maximum QEMU supports, and also, incidentally, the
maximum KVM/gicv3 currently supports. Also, a nice side-effect of
delaying the max-cpus check is that we now get more appropriate
error messages for gicv2 machines that try to configure more than
123 cpus. Before this patch it would complain that the requested
number of cpus was greater than 123, but for gicv2 configs, it
should complain that the number is greater than 8.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 1445189728-860-3-git-send-email-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Enable the fw_cfg DMA interface for the ARM virt machine.
Based on Gerd Hoffman's initial implementation.
Signed-off-by: Marc Marí <markmb@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Based on the specifications on docs/specs/fw_cfg.txt
This interface is an addon. The old interface can still be used as usual.
Based on Gerd Hoffman's initial implementation.
Signed-off-by: Marc Marí <markmb@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently PCI IO address 0 is not allowed even though
the IO space starts from 0. This update makes PCI IO
address 0 usable.
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Andrew Jones <drjones@redhat.com>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ARM uses dashes instead of underscores for machine names. Fix imx25_pdk
which has not seen a release yet (so there is no legacy yet).
Cc: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 1444445785-3648-1-git-send-email-crosthwaite.peter@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: Added change to tests/ds1338-test.c to use new machine name]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* For Collie, Akita, Spitz, Borzoi, Terrier and Tosa PDAs, provide
model numbers and manufacturer (Sharp) information.
Signed-off-by: Ryo ONODERA <ryo_on@yk.rim.or.jp>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ARM/AArch64 KVM guests don't have any way to identify
themselves as KVM guests (x86 guests use a CPUID leaf). Now, we
could discuss all sorts of reasons why guests shouldn't need to
know that, but then there's always some case where it'd be
nice... Anyway, now that we have SMBIOS tables in ARM guests,
it's easy for the guest to know that it's a QEMU instance. This
patch takes that one step further, also identifying KVM, when
appropriate. Again, we could debate why generally nothing
should care whether it's of type QEMU or QEMU/KVM, but again,
sometimes it's nice to know...
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Wei Huang <wei@redhat.com>
Message-id: 1443017892-15567-1-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Several devices don't survive object_unref(object_new(T)): they crash
or hang during cleanup, or they leave dangling pointers behind.
This breaks at least device-list-properties, because
qmp_device_list_properties() needs to create a device to find its
properties. Broken in commit f4eb32b "qmp: show QOM properties in
device-list-properties", v2.1. Example reproducer:
$ qemu-system-aarch64 -nodefaults -display none -machine none -S -qmp stdio
{"QMP": {"version": {"qemu": {"micro": 50, "minor": 4, "major": 2}, "package": ""}, "capabilities": []}}
{ "execute": "qmp_capabilities" }
{"return": {}}
{ "execute": "device-list-properties", "arguments": { "typename": "pxa2xx-pcmcia" } }
qemu-system-aarch64: /home/armbru/work/qemu/memory.c:1307: memory_region_finalize: Assertion `((&mr->subregions)->tqh_first == ((void *)0))' failed.
Aborted (core dumped)
[Exit 134 (SIGABRT)]
Unfortunately, I can't fix the problems in these devices right now.
Instead, add DeviceClass member cannot_destroy_with_object_finalize_yet
to mark them:
* Hang during cleanup (didn't debug, so I can't say why):
"realview_pci", "versatile_pci".
* Dangling pointer in cpus: most CPUs, plus "allwinner-a10", "digic",
"fsl,imx25", "fsl,imx31", "xlnx,zynqmp", because they create such
CPUs
* Assert kvm_enabled(): "host-x86_64-cpu", host-i386-cpu",
"host-powerpc64-cpu", "host-embedded-powerpc-cpu",
"host-powerpc-cpu" (the powerpc ones can't currently reach the
assertion, because the CPUs are only registered when KVM is enabled,
but the assertion is arguably in the wrong place all the same)
Make qmp_device_list_properties() fail cleanly when the device is so
marked. This improves device-list-properties from "crashes, hangs or
leaves dangling pointers behind" to "fails". Not a complete fix, just
a better-than-nothing work-around. In the above reproducer,
device-list-properties now fails with "Can't list properties of device
'pxa2xx-pcmcia'".
This also protects -device FOO,help, which uses the same machinery
since commit ef52358 "qdev-monitor: include QOM properties in -device
FOO, help output", v2.2. Example reproducer:
$ qemu-system-aarch64 -machine none -device pxa2xx-pcmcia,help
Before:
qemu-system-aarch64: .../memory.c:1307: memory_region_finalize: Assertion `((&mr->subregions)->tqh_first == ((void *)0))' failed.
After:
Can't list properties of device 'pxa2xx-pcmcia'
Cc: "Andreas Färber" <afaerber@suse.de>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Anthony Green <green@moxielogic.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Jia Liu <proljc@gmail.com>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: qemu-ppc@nongnu.org
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1443689999-12182-10-git-send-email-armbru@redhat.com>
This causes the region to outlive the object, because it attaches the
region to /machine. This is not nice for the "realize" method, but
much worse for "instance_init" because it can cause dangling pointers
after a simple object_new/object_unref pair.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1443689999-12182-3-git-send-email-armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The only generic code relying on this is linux-user. Linux user
already has a lot of #ifdef TARGET_ customisation so instead, define
ELF_ARCH as either EM_ARM or EM_AARCH64 appropriately.
The armv7m bootloader can just pass EM_ARM directly, as that
is architecture specific code. Note that arm_boot already has its own
logic selecting an arm specific elf machine so this makes V7M more
consistent with arm_boot.
This removes another architecture specific definition from the global
namespace.
Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-By: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While virt machine creates two flash devices with total size 0x08000000,
the ACPI table generation code was wrongly using this total size as the
size of each flash device, so it would overlap other MMIO spaces.
Make each device entry in the table half the total; this brings the
ACPI table into line with the code which generates the device tree
and which creates the flash devices themselves.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Wei Huang <wei@redhat.com>
Tested-by: Graeme Gregory <graeme.gregory@linaro.org>
Message-id: 1442455041-6596-1-git-send-email-shannon.zhao@linaro.org
[PMM: edited commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add gic_version to VirtMachineState, set it to value of the option
and pass it around where necessary. Instantiate devices and fdt
nodes according to the choice.
max_cpus for virt machine increased to 123 (calculated from redistributor
space available in the memory map). GICv2 compatibility check happens
inside arm_gic_common_realize().
ITS region is added to the memory map too, however currently it not used,
just reserved.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Tested-by: Ashok kumar <ashoks@broadcom.com>
[PMM: Added missing cpu_to_le* calls, thanks to Shannon Zhao]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The script used for converting from QEMUMachine had used one
DEFINE_MACHINE() per machine registered. In cases where multiple
machines are registered from one source file, avoid the excessive
generation of module init functions by reverting this unrolling.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Convert all machines to use DEFINE_MACHINE() instead of QEMUMachine
automatically using a script.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
[AF: Style cleanups, convert imx25_pdk machine]
Signed-off-by: Andreas Färber <afaerber@suse.de>
This will make the code follow the same pattern used for other machines,
and will make it easier to automatically convert the code to be
QOM-based.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
We don't need a QEMUMachine array to query max_cpus, if we can get the
corresponding MachineClass.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The code is checking smp_cpus against EXYNOS4210_NCPUS, not against
max_cpus, so use EXYNOS4210_NCPUS in the error message for consistency.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Now all TYPE_MACHINE subclasses use MACHINE_TYPE_NAME to generate the
class name. So instead of requiring each subclass to set
MachineClass::name manually, we can now set it automatically at the
TYPE_MACHINE class_base_init() function.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
[AF/ehabkost: Updated for s390-ccw machines]
[AF: Cleanup of intermediate virt and vexpress name handling]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Machine class names should use the "-machine" suffix to allow
class-name-based machine class lookup to work. Rename the arm virt
machine class using the MACHINE_TYPE_NAME macro.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Machine class names should use the "-machine" suffix to allow
class-name-based machine class lookup to work. Rename the vexpress
machine classes using the MACHINE_TYPE_NAME macro.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[AF: Introduce VEXPRESS_*_MACHINE_NAME]
Signed-off-by: Andreas Färber <afaerber@suse.de>
The MachineClass::name field won't be ever be used on TYPE_VEXPRESS, as
it is an abstract class and the machine class lookup code explicitly
skips abstract classes. We can remove it to make the code simpler.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Symptom:
$ qemu-system-x86_64 -m 10000000
Unexpected error in ram_block_add() at /work/armbru/qemu/exec.c:1456:
upstream-qemu: cannot set up guest memory 'pc.ram': Cannot allocate memory
Aborted (core dumped)
Root cause: commit ef701d7 screwed up handling of out-of-memory
conditions. Before the commit, we report the error and exit(1), in
one place, ram_block_add(). The commit lifts the error handling up
the call chain some, to three places. Fine. Except it uses
&error_abort in these places, changing the behavior from exit(1) to
abort(), and thus undoing the work of commit 3922825 "exec: Don't
abort when we can't allocate guest memory".
The three places are:
* memory_region_init_ram()
Commit 4994653 (right after commit ef701d7) lifted the error
handling further, through memory_region_init_ram(), multiplying the
incorrect use of &error_abort. Later on, imitation of existing
(bad) code may have created more.
* memory_region_init_ram_ptr()
The &error_abort is still there.
* memory_region_init_rom_device()
Doesn't need fixing, because commit 33e0eb5 (soon after commit
ef701d7) lifted the error handling further, and in the process
changed it from &error_abort to passing it up the call chain.
Correct, because the callers are realize() methods.
Fix the error handling after memory_region_init_ram() with a
Coccinelle semantic patch:
@r@
expression mr, owner, name, size, err;
position p;
@@
memory_region_init_ram(mr, owner, name, size,
(
- &error_abort
+ &error_fatal
|
err@p
)
);
@script:python@
p << r.p;
@@
print "%s:%s:%s" % (p[0].file, p[0].line, p[0].column)
When the last argument is &error_abort, it gets replaced by
&error_fatal. This is the fix.
If the last argument is anything else, its position is reported. This
lets us check the fix is complete. Four positions get reported:
* ram_backend_memory_alloc()
Error is passed up the call chain, ultimately through
user_creatable_complete(). As far as I can tell, it's callers all
handle the error sanely.
* fsl_imx25_realize(), fsl_imx31_realize(), dp8393x_realize()
DeviceClass.realize() methods, errors handled sanely further up the
call chain.
We're good. Test case again behaves:
$ qemu-system-x86_64 -m 10000000
qemu-system-x86_64: cannot set up guest memory 'pc.ram': Cannot allocate memory
[Exit 1 ]
The next commits will repair the rest of commit ef701d7's damage.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1441983105-26376-3-git-send-email-armbru@redhat.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
The errp and err variable have unnecessary brackets around them,
so remove the brackets.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 9900393572b63f2ec3d68785ca98193d81e0ac71.1441758563.git.alistair.francis@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A number of source files have statements accidentally
terminated by a double semicolon - eg 'foo = bar;;'.
This is harmless but a mistake none the less.
The tcg/ia64/tcg-target.c file is whitelisted because
it has valid use of ';;' in a comment containing assembly
code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Connect the Sysbus AHCI device to ZynqMP.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Sai Pavan Boddu <saipava@xilinx.com>
[PMM: removed unnecessary brackets in error_propagate call]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert all of the non-realize error_propagate() calls into error_abort
calls as they shouldn't be user visible failure cases.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If we're creating a board with support for TrustZone, then enable
it on the GIC model as well as on the CPUs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1441383782-24378-7-git-send-email-peter.maydell@linaro.org
Switch the default for the 'virt' board to not providing TrustZone
support in either the CPU or the GIC. This is primarily for the
benefit of UEFI, which currently assumes there is no TrustZone
support, and does not set the GIC up correctly if it is TZ-aware.
It also means the board is consistent about its behaviour whether
we're using KVM or TCG (KVM never has TrustZone support).
If TrustZone support is required (for instance for running test
suites or TZ-aware firmware) it can be enabled with the
"-machine secure=on" command line option.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1441383782-24378-6-git-send-email-peter.maydell@linaro.org
For ARM we have a little minimalist bootloader in hw/arm/boot.c which
takes the place of firmware if we're directly booting a Linux kernel.
Unfortunately a few devices need special case handling in this situation
to do the initialization which on real hardware would be done by
firmware. (In particular if we're booting a kernel in NonSecure state
then we need to make a TZ-aware GIC put all its interrupts into Group 1,
or the guest will be unable to use them.)
Create a new QOM interface which can be implemented by devices which
need to do something different from their default reset behaviour.
The callback will be called after machine initialization and before
first reset.
Suggested-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1441383782-24378-3-git-send-email-peter.maydell@linaro.org
At least with KVM, currently there's no reason why QEMU would not be
capable of handling Aff3 != 0. This commit fixes up FDT creation in such
a case.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Message-id: eef5a86e6d9a313780dbc23b35fcb65df42a3e9e.1441366248.git.p.fedin@samsung.com
[PMM: folded two overlong lines]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested by booting a minimal Linux system on the emulated platform
Tested by booting the Xvisor hypervisor on the emulated platform
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: d27347300d253509d921bc27a6d0a14db877478b.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For now we support the following devices:
* CPU: ARM926
* Interrupt Controller: AVIC
* CCM
* UART x 5
* EPIT x 2
* GPT x 4
* FEC
* I2C x 3
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 62218bfa90f9101f79098e768c3d58bd92dcb7f3.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert the KZM board to use the i.MX31 SoC defintition instead of
redefining the entire SoC on the machine level. Major rewrite of the
machine init code.
While touching the memory map comment de-indent to the correct level
of indentation.
This obsoletes the legacy i.MX device device creation helpers which are removed.
Tested by booting a minimal Linux system on the emulated platform
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 5e783561f092e1c939562fdff001f1ab1194b07f.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For now we support the following devices:
* CPU: ARM1136
* Interrupt Controller: AVIC
* CCM
* UART x 2
* EPIT x 2
* GPT
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: f146d819594e41568daec42a1d0f440cdfe3df76.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This large region is necessary for some devices like ivshmem and video cards
32-bit kernels can be built without LPAE support. In this case such a kernel
will not be able to use PCI controller which has windows in high addresses.
In order to work around the problem, "highmem" option is introduced. It
defaults to on on, but can be manually set to off in order to be able to run
those old 32-bit guests.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
[PMM: Added missing ULL suffixes and a comment to the a15memmap[] entry]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch generates smbios tables for ARM mach-virt. Also add
CONFIG_SMBIOS=y for ARM default config.
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Wei Huang <wei@redhat.com>
Message-id: 1440615870-9518-3-git-send-email-wei@redhat.com
[PMM: Added missing braces around an if().]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Xilinx EP108 has four separate OCM banks which are located
adjacent to each other. This patch adds the four banks to
the ZynqMP SoC.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: afa6ba31163a5d541a0bef4b0dc11f2597e0c495.1436813543.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Wire up the secure timer interrupt. Since we've defined
that the plain old physical timer is the NS timer, we can
drop the now-out-of-date comment about QEMU not having TZ.
Use a data-driven loop to wire up the timer interrupts, since
we now have four of them and the code is the same for each.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1437047249-2357-4-git-send-email-peter.maydell@linaro.org
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
This small inline returns correct GIC class name depending on whether we
use KVM acceleration or not. Avoids duplicating the condition everywhere.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 4f26901be9b844b563673ce3ad08eeedbb7a7132.1438758065.git.p.fedin@samsung.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1436791864-4582-8-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace magic constants with macros from
hw/arm/virt.h and hw/intc/arm_gic_common.h.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1436791864-4582-7-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
True is the default.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Message-id: 1435734647-8371-2-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The Linux kernel on aarch64 creates a page table entry at early bootup
that spans the 2MB range on memory spanning the fdt start address:
[ ALIGN_DOWN(fdt, 2MB) ... ALIGN_DOWN(fdt, 2MB) + 2MB ]
This means that when our current 4k alignment happens to fall at the end
of the aligned region, Linux tries to access memory that is not mapped.
The easy fix is to instead increase the alignment to 2MB, making Linux's
logic always succeed.
We leave the existing 4k alignment for 32bit kernels to not cause any
regressions due to space constraints.
Reported-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use cpu_set_pc() across the board for setting program counters. This
removes instances of system level code having to reach into the CPU
env.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
[AF: Avoid repeated casts with local variables]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Now we have virtio-pci, we can make the virt board's default block
device type be IF_VIRTIO. This allows users to use simplified
command lines that don't have to explicitly create virtio-pci-blk
devices; the -hda &c very short options now also work.
This means we also need to set no_cdrom to avoid getting a
default cdrom device -- this is needed because the virtio-blk
device will fail if it is connected to a block backend with
no media, which is what the default cdrom device typically is.
Providing a cdrom with media via -cdrom will succeed, but silently
create a device with non-removable medium. this is probably
not really what the user wants, but is the best we can do now.
Note that this change means that some command lines which used
to work (by accident) will stop working. Where a drive was connected
manually to a device but without 'if=none' being specified, we
used to treat this as an IDE drive, which we would then not autoplug
because the board doesn't support IDE. Now we will treat it as a
virtio disk and autoplug it, which means the attempt to use the
drive manually will fail:
qemu-system-arm: -drive file=img.qcow2,id=foo: Drive 'foo' is already
in use because it has been automatically connected to another device
(did you need 'if=none' in the drive options?)
The command line will have to be changed to include 'if=none', as the
error message suggests.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435068107-12594-4-git-send-email-peter.maydell@linaro.org
Add GICv2m description in ACPI MADT table, so guest can use MSI when
booting with ACPI.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Message-id: 1434676210-2276-1-git-send-email-shannon.zhao@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The table revision is not the ACPI spec version. Fix the wrong revision
and also some comments.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1433820378-8336-1-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the 2xCortexR5 CPUs to zynqmp board. They are powered off on reset
(this is true of real hardware) by default or selectable as the boot
processor.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: da34128c73ca13fc4f8c3293e1a33d1e1e345655.1434501320.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a string property that specifies the primary boot cpu. All CPUs
except the one selected will start-powered-off. This allows for elf
boots on any CPU, which prepares support for booting R5 elfs directly
on the R5 processors.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 53331c00d80c7ce9c6a83712348773f1b38fae2b.1434501320.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The CPUs currently supported by zynqmp are the APU (application
processing unit) CPUs. There are other CPUs in Zynqmp so unqualified
"cpus" in ambiguous. Preface the variables with "APU" accordingly, to
prepare support adding the RPU (realtime processing unit) processors.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: ce32287fc365aea898465e981da3546a227e0811.1434501320.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch allows the instantiation of the vfio-calxeda-xgmac device
from the QEMU command line (-device vfio-calxeda-xgmac,host="<device>").
A specialized device tree node is created for the guest, containing
compat, dma-coherent, reg and interrupts properties.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1434455898-17895-1-git-send-email-eric.auger@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1433929959-29530-3-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
commit ac9d32e396 had the consequence to
register the do_cpu_reset after the rom_reset one. Hence they get
executed in the wrong order. This commit restores the registration of
do_cpu_reset in arm_load_kernel.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reported-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Tested-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1434111582-9325-1-git-send-email-eric.auger@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The pxa2xx-ssp device is already a QOM device but is still
using the old-style register_savevm(); convert to VMState.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1434117989-7367-5-git-send-email-peter.maydell@linaro.org
The pxa2xx_ssp device was missing a reset method; add one.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter..crosthwaite@xilinx.com>
Message-id: 1434117989-7367-4-git-send-email-peter.maydell@linaro.org
Convert the pxa2xx-fir device to QOM, including using a
VMState for its migration info.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1434117989-7367-3-git-send-email-peter.maydell@linaro.org
The pxa2xx custom coprocessor registers in cp6 and cp14 do device
accesses, so mark the non-constant regs as ARM_CP_IO so that
icount works correctly and doesn't abort.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1434117989-7367-2-git-send-email-peter.maydell@linaro.org
When we're using KVM, the kernel's internal idea of the MPIDR
affinity fields must match the values we tell it for the guest
vcpu cluster configuration in the device tree. Since at the moment
the kernel doesn't support letting userspace tell it the correct
affinity fields to use, we must read the kernel's view and
reflect that back in the device tree.
Signed-off-by: Shlomo Pongratz <shlomo.pongratz@huawei.com>
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Message-id: 02f601d0a1e6$90c7d630$b2578290$@samsung.com
[PMM: Use a local #define rather than a global variable for
the TCG ARM_CPUS_PER_CLUSTER setting. Tweak a comment. Update the
commit message.]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add cortex-a53 cpu support in machine virt, so it can be used for TCG
and KVM.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1433207452-4512-3-git-send-email-shannon.zhao@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVbvwjAAoJEL7lnXSkw9fbaFwIAIh6PN5v6fvuEjnPX5ijHZC2
7iJoFd0I2cYrxgLe4xONFX9qzV5vgdEAJfXCljVCKAmzu5RK7G0ZSW81sJ3t6Mp8
kA8buJeyTp2UcTlDrC3qji8ScEIj+g8I9tKGflNVI2uDAVumMBPqnJNSFhbaqYlu
SEq+4y/D3J6xPzr7NhyHliG0NmxJrIn6QCtux5djj3xO4KXfp1j2YQCPKhYjkRlW
wHfqeD7x9LX6875FX3csgfPsYIycW0WYtba2adTe0vbTsclOY0CU3ho8HPeXgHE6
WQj6KYGT8Fo0zmK8UV0Jmok7+hZoxXXInf6vY+sSY58oe71FgdxNwLvIC6N0eQc=
=AALk
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2015-06-03' into staging
trivial patches for 2015-06-03
# gpg: Signature made Wed Jun 3 14:07:47 2015 BST using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
* remotes/mjt/tags/pull-trivial-patches-2015-06-03: (30 commits)
configure: postfix --extra-cflags to QEMU_CFLAGS
cadence_gem: Fix Rx buffer size field mask
slirp: use less predictable directory name in /tmp for smb config (CVE-2015-4037)
translate-all: delete prototype for non-existent function
Add -incoming help text
hw/display/tc6393xb.c: Fix misusing qemu_allocate_irqs for single irq
hw/arm/nseries.c: Fix misusing qemu_allocate_irqs for single irq
hw/alpha/typhoon.c: Fix misusing qemu_allocate_irqs for single irq
hw/unicore32/puv3.c: Fix misusing qemu_allocate_irqs for single irq
hw/lm32/milkymist.c: Fix misusing qemu_allocate_irqs for single irq
hw/lm32/lm32_boards.c: Fix misusing qemu_allocate_irqs for single irq
hw/ppc/prep.c: Fix misusing qemu_allocate_irqs for single irq
hw/sparc/sun4m.c: Fix misusing qemu_allocate_irqs for single irq
hw/timer/arm_timer.c: Fix misusing qemu_allocate_irqs for single irq
hw/isa/i82378.c: Fix misusing qemu_allocate_irqs for single irq
hw/isa/lpc_ich9.c: Fix misusing qemu_allocate_irqs for single irq
hw/i386/pc: Fix misusing qemu_allocate_irqs for single irq
hw/intc/exynos4210_gic.c: Fix memory leak by adjusting order
hw/arm/omap_sx1.c: Fix memory leak spotted by valgrind
hw/ppc/e500.c: Fix memory leak
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Re-indent in a15memmap after VIRT_PLATFORM_BUS introduction
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1433244554-12898-5-git-send-email-eric.auger@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allows sysbus devices to be instantiated from command line by
using -device option. Machvirt creates a platform bus at init.
The dynamic sysbus devices are attached to this platform bus device.
The platform bus device registers a machine init done notifier
whose role will be to bind the dynamic sysbus devices. Indeed
dynamic sysbus devices are created after machine init.
machvirt also registers a notifier that will build the device
tree nodes for the platform bus and its children dynamic sysbus
devices.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1433244554-12898-4-git-send-email-eric.auger@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Device tree nodes for the platform bus and its children dynamic sysbus
devices are added in a machine init done notifier. To load the dtb once,
after those latter nodes are built and before ROM freeze, the actual
arm_load_kernel existing code is moved into a notifier notify function,
arm_load_kernel_notify. arm_load_kernel now only registers the
corresponding notifier.
Machine files that do not support platform bus stay unchanged. Machine
files willing to support dynamic sysbus devices must call arm_load_kernel
before sysbus-fdt arm_register_platform_bus_fdt_creator to make sure
dynamic sysbus device nodes are integrated in the dtb.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Shannon Zhao <zhaoshenglong@huawei.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1433244554-12898-3-git-send-email-eric.auger@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This new C module will be used by ARM machine files to generate
platform bus node and their dynamic sysbus device tree nodes.
Dynamic sysbus device node addition is done in a machine init
done notifier. arm_register_platform_bus_fdt_creator does the
registration of this latter and is supposed to be called by
ARM machine files that support platform bus and their dynamic
sysbus. Addition of dynamic sysbus nodes is done only if the
user did not provide any dtb.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Shannon Zhao <zhaoshenglong@huawei.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1433244554-12898-2-git-send-email-eric.auger@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a GICv2m device to the virt board to enable MSIs on the generic PCI
host controller. We allocate 64 SPIs in the IRQ space for now (this can
be increased/decreased later) and map the GICv2m right after the GIC in
the memory map.
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1432897270-7780-5-git-send-email-christoffer.dall@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In preparation for adding the GICv2m which requires address specifiers
and is a subnode of the gic, we extend the gic DT definition to specify
the #address-cells and #size-cells properties and add an empty ranges
property properties of the DT node, since this is required to add the
v2m node as a child of the gic node.
Note that we must also expand the irq-map to reference the gic with the
right address-cells as a consequence of this change.
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1432897270-7780-4-git-send-email-christoffer.dall@linaro.org
Suggested-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of passing the GIC phandle around between functions, add it to
the VirtBoardInfo just like we do for the clock_phandle. We are about
to add the v2m phandle as well, and it's easier not having to pass
around a bunch of phandles, return multiple values from functions, etc.
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1432897270-7780-2-git-send-email-christoffer.dall@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add PCIe controller in ACPI DSDT table, so the guest can detect
the PCIe.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1432522520-8068-23-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
RSDP points to RSDT which in turn points to other tables.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1432522520-8068-13-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
RSDT points to other tables FADT, MADT, GTDT. This code is shared with x86.
Here we still use RSDT as UEFI puts ACPI tables below 4G address space,
and UEFI ignore the RSDT or XSDT.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1432522520-8068-12-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ACPI v5.1 defines GTDT for ARM devices as a place to describe timer
related information in the system. The Arch Timer interrupts must
be provided for GTDT.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1432522520-8068-11-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
MADT describes GIC enabled ARM platforms. The GICC and GICD
subtables are used to define the GIC regions.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1432522520-8068-10-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the case of mach virt, it is used to set the Hardware Reduced bit
and enable PSCI SMP booting through HVC. So ignore FACS and FADT
points to DSDT.
Update the header definitions for FADT taking into account the new
additions of ACPI v5.1 in `include/hw/acpi/acpi-defs.h`
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1432522520-8068-9-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
DSDT consists of the usual common table header plus a definition
block in AML encoding which describes all devices in the platform.
After initializing DSDT with header information the namespace is
created which is followed by the device encodings. The devices are
described using the Resource Template for the 32-Bit Fixed Memory
Range and the Extended Interrupt Descriptors.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1432522520-8068-8-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce a preliminary framework in virt-acpi-build.c with the main
ACPI build functions. It exposes the generated ACPI contents to
guest over fw_cfg.
The required ACPI v5.1 tables for ARM are:
- RSDP: Initial table that points to XSDT
- RSDT: Points to FADT GTDT MADT tables
- FADT: Generic information about the machine
- GTDT: Generic timer description table
- MADT: Multiple APIC description table
- DSDT: Holds all information about system devices/peripherals, pointed by FADT
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 1432522520-8068-5-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To generate ACPI table for PCIe controller, we need the base and size of
the PCIe ranges. Record these ranges in MemMapEntry array, then we could
share and use them for generating ACPI table.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1432522520-8068-4-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move some common definitions to virt.h. These will be used by
generating ACPI tables.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1432522520-8068-3-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add bootloader support using standard ARM bootloader.
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: b829abaf2b70d02b28e79301553cbd74afc416a1.1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Zynq MPSoC supports external DDR RAM. Add a RAM at 0 to the model.
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 2c25e2a4198402a6477aef2975d5df7c415dd341.1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a machine model for the Xilinx ZynqMP SoC EP108 board.
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 3896b34c862f370dc0679e4428bf3848d1f9f83c.1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are 2x Cadence UARTs in Zynq MP. Add them.
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: e30795536f77599fabc1052278d846ccd52322e2.1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are 4x Cadence GEMs in ZynqMP. Add them.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 7d3e68e5495d145255f0ee567046415e3a26d67e.1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Connect the GPIO outputs from the individual CPUs for the timers to the
GIC.
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: a7866a4f0c903c91fa3034210b4d2879aa4bfcb9.1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the GIC and connect IRQ outputs to the CPUs. The GIC regions are
under-decoded through a 64k address region so implement aliases
accordingly.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 5853189965728d676106d9e94e76b9bb87981cb5.1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With quad Cortex-A53 CPUs.
Use SMC PSCI, with the standard policy of secondaries starting in
power-off.
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: a16202a6c7b79e446e5289d38cb18d2ee4b897a0.1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Connect FIQ output of the GIC CPU interfaces to the CPUs.
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1430502643-25909-17-git-send-email-peter.maydell@linaro.org
Message-id: 1429113742-8371-3-git-send-email-greg.bellows@linaro.org
[PMM: minor format tweak]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are a number of ffs(3) callers that do roughly:
bit = ffs(val);
if (bit) {
do_something(bit - 1);
}
This pattern can be converted to ctz32() like this:
zeroes = ctz32(val);
if (zeroes != 32) {
do_something(zeroes);
}
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427124571-28598-6-git-send-email-stefanha@redhat.com
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This commit was generated mechanically by coccinelle from the following
semantic patch:
@@
expression val;
@@
- (ffs(val) - 1)
+ ctz32(val)
The call sites have been audited to ensure the ffs(0) - 1 == -1 case
never occurs (due to input validation, asserts, etc). Therefore we
don't need to worry about the fact that ctz32(0) == 32.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427124571-28598-5-git-send-email-stefanha@redhat.com
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is not clear from the code how a 0 parameter should be handled by the
hardware. Keep the same behavior as ffs(0) - 1 == -1.
Cc: Andrzej Zaborowski <balrog@zabor.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427124571-28598-3-git-send-email-stefanha@redhat.com
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Rename the field holding CPACR_EL1 system register state in AArch64
naming style.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
[PMM: also fixed a couple of missed occurrences in cpu.c]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Switch all the uses of ld/st*_phys to address_space_ld/st*,
except for those cases where the address space is the CPU's
(ie cs->as). This was done with the following script which
generates a Coccinelle patch.
A few over-80-columns lines in the result were rewrapped by
hand where Coccinelle failed to do the wrapping automatically,
as well as one location where it didn't put a line-continuation
'\' when wrapping lines on a change made to a match inside
a macro definition.
===begin===
#!/bin/sh -e
# Usage:
# ./ldst-phys.spatch.sh > ldst-phys.spatch
# spatch -sp_file ldst-phys.spatch -dir . | sed -e '/^+/s/\t/ /g' > out.patch
# patch -p1 < out.patch
for FN in ub uw_le uw_be l_le l_be q_le q_be uw l q; do
cat <<EOF
@ cpu_matches_ld_${FN} @
expression E1,E2;
identifier as;
@@
ld${FN}_phys(E1->as,E2)
@ other_matches_ld_${FN} depends on !cpu_matches_ld_${FN} @
expression E1,E2;
@@
-ld${FN}_phys(E1,E2)
+address_space_ld${FN}(E1,E2, MEMTXATTRS_UNSPECIFIED, NULL)
EOF
done
for FN in b w_le w_be l_le l_be q_le q_be w l q; do
cat <<EOF
@ cpu_matches_st_${FN} @
expression E1,E2,E3;
identifier as;
@@
st${FN}_phys(E1->as,E2,E3)
@ other_matches_st_${FN} depends on !cpu_matches_st_${FN} @
expression E1,E2,E3;
@@
-st${FN}_phys(E1,E2,E3)
+address_space_st${FN}(E1,E2,E3, MEMTXATTRS_UNSPECIFIED, NULL)
EOF
done
===endit===
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Commit 0b183fc871:"memory: move mem_path handling to
memory_region_allocate_system_memory" split memory_region_init_ram and
memory_region_init_ram_from_file. Also it moved mem-path handling a step
up from memory_region_init_ram to memory_region_allocate_system_memory.
Therefore for any board that uses memory_region_init_ram directly,
-mem-path is not supported.
Fix this by replacing memory_region_init_ram with
memory_region_allocate_system_memory.
Signed-off-by: Dirk Mueller <dmueller@suse.com>
Message-id: CAL5wTH4UHYKpJF=dLJfFzxpufjY189chnCow47-ySuLf8GLbug@mail.gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Device models aren't supposed to go on fishing expeditions for
backends. They should expose suitable properties for the user to set.
For onboard devices, board code sets them.
A number of sysbus devices pick up block backends in their init() /
instance_init() methods with drive_get_next() instead: sl-nand,
milkymist-memcard, pl181, generic-sdhci.
Likewise, a number of sysbus devices pick up character backends in
their init() / realize() methods with qemu_char_get_next_serial():
cadence_uart, digic-uart, etraxfs,serial, lm32-juart, lm32-uart,
milkymist-uart, pl011, stm32f2xx-usart, xlnx.xps-uartlite.
All these mistakes are already marked FIXME. See the commit that
added these FIXMEs for a more detailed explanation of what's wrong.
Fortunately, only machines ppce500 and pseries-* support -device with
sysbus devices, and none of the devices above is supported with these
machines.
Set cannot_instantiate_with_device_add_yet to preserve our luck.
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Cc: Antony Pavlov <antonynpavlov@gmail.com>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
NICs defined with -net nic are for board initialization to wire up.
Board code examines nd_table[] to find them, and creates devices with
their qdev NIC properties set accordingly.
Except "allwinner-a10" goes on a fishing expedition for NIC
configuration instead of exposing the usual NIC properties for board
code to set: it uses nd_table[0] in its instance_init() method.
Picking up the first -net nic option's configuration that way works
when the device is created by board code. But it's inappropriate for
-device and device_add. Not only is it inconsistent with how the
other block device models work (they get their configuration from
properties "mac", "vlan", "netdev"), it breaks when nd_table[0] has
been picked up by the board or a previous -device / device_add
already.
Example:
$ qemu-system-arm -S -M cubieboard -device allwinner-a10
qemu-system-arm: -device allwinner-a10: Property 'allwinner-emac.netdev' can't take value 'hub0port0', it's in use
Aborted (core dumped)
It also breaks in other entertaining ways:
$ qemu-system-arm -M highbank -device allwinner-a10
qemu-system-arm: -device allwinner-a10: Unsupported NIC model: xgmac
$ qemu-system-arm -M highbank -net nic,model=allwinner-emac -device allwinner-a10
qemu-system-arm: Unsupported NIC model: allwinner-emac
Mark the mistake with a FIXME comment.
Cc: Li Guang <lig.fnst@cn.fujitsu.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Character devices defined with -serial and -parallel are for board
initialization to wire up. Board code examines serial_hds[] and
parallel_hds[] to find them, and creates devices with their qdev
chardev properties set accordingly.
Except a few devices go on a fishing expedition for a suitable backend
instead of exposing a chardev property for board code to set: they use
serial_hds[] (often via qemu_char_get_next_serial()) or parallel_hds[]
in their realize() or init() method to connect to a backend.
Picking up backends that way works when the devices are created by
board code. But it's inappropriate for -device or device_add. Not
only is it inconsistent with how the other characrer device models
work (they connect to a backend explicitly identified by a "chardev"
property), it breaks when the backend has been picked up by the board
or a previous -device / device_add already.
Example:
$ qemu-system-ppc64 -M bamboo -S -device i82378 -device pc87312 -device pc87312
qemu-system-ppc64: -device pc87312: Property 'isa-parallel.chardev' can't take value 'parallel0', it's in use
Mark them with suitable FIXME comments.
Cc: Li Guang <lig.fnst@cn.fujitsu.com>
Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Cc: Antony Pavlov <antonynpavlov@gmail.com>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Cc: "Andreas Färber" <andreas.faerber@web.de>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Drives defined with if!=none are for board initialization to wire up.
Board code calls drive_get() or similar to find them, and creates
devices with their qdev drive properties set accordingly.
Except a few devices go on a fishing expedition for a suitable backend
instead of exposing a drive property for board code to set: they call
driver_get() or drive_get_next() in their realize() or init() method
to implicitly connect to the "next" backend with a certain interface
type.
Picking up backends that way works when the devices are created by
board code. But it's inappropriate for -device or device_add. Not
only is this inconsistent with how the other block device models work
(they connect to a backend explicitly identified by a "drive"
property), it breaks when the "next" backend has been picked up by the
board already.
Example:
$ qemu-system-arm -S -M connex -pflash flash.img -device ssi-sd
Aborted (core dumped)
Mark them with suitable FIXME comments.
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Cc: "Andreas Färber" <andreas.faerber@web.de>
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Commits 6e05a12f8f and db25a1581 both attempt to fix the
same "failed to free memory containing flash filename" bug,
with the effect that when they were both applied we ended
up freeing the memory twice. Delete the spurious extra free.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1427968334-14527-1-git-send-email-peter.maydell@linaro.org
As 4de9a88(hw/arm/virt: Fix memory leak reported by Coverity)
and 6e05a12(arm: fix memory leak) both handle the memory leak
reported by Coverity, this cause qemu corruption due to
double free.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1427944026-8968-1-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As the conditional statement had to be split anyway, we can also
add a better error report message.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1426877982-3603-1-git-send-email-sw@weilnetz.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As the conditional statement had to be split anyway, we can also
add a better error report message.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1426877963-3556-1-git-send-email-sw@weilnetz.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coverity reports a resource leak for sysboot_filename which is allocated
by qemu_find_file.
In addition, that name is used to get the size of the image, but a
different image name was used to load it.
In addition, instead of passing the maximum allowed image size the actual
image size was passed to load_image_targphys.
Fix all three issues.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1426326781-2488-1-git-send-email-sw@weilnetz.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is a continuation of the work started in commit 565f65d27:
"error: Use error_report_err() where appropriate"
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Michael Tokarev <mjt@tls.msk.ru>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This allows to use the SD card emulation of the board: Forward the
signals from the pl181 top the CP control register emulation, report the
current state via CP_INTREG, deliver CARDIN IRQ to the secondary
interrupt controller and also support clearing that line via CP_INTREG.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-id: c55d9fb28d19ec83625cb0074b3b6f2e5958caf6.1426004843.git.jan.kiszka@siemens.com
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds the stm32f205 SoC. This will be used by the
Netduino 2 to create a machine.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 48d509747a1ea0d8a7d5480560495e679990f9d2.1424175342.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The recently introduced feature that allows 32 bit guests to be
executed under KVM on a 64-bit host incorrectly handles the case
where more than 1 cpu is specified using '-smp N'
For instance, this invocation of qemu
qemu-system-aarch64 -M virt -cpu cortex-a57,aarch64=off -smp 2
produces the following error
qemu-system-aarch64: Expected key=value format, found aarch64
which is caused by the destructive parsing performed by
cpu_common_parse_features(), resulting in subsequent attempts
to parse the CPU option string (for each additional CPU) to fail.
So duplicate the string before parsing it, and free it directly
afterwards.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
Message-id: 1425402380-10488-1-git-send-email-ard.biesheuvel@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coverity/sparse fix for iscsi driver
- RCU fallout: fix -daemonize and s390x system emulation
- KVM: kvm_stat improvements and new man page
- x86: SYSRET fix for VxWorks
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJU/sUFAAoJEL/70l94x66D1JwIAJ28Lan2DQwi+xHvNxF8zW6n
v7eMc04/fepuon0TYmUZC3qbqc00sccEQZQ+yAAauT9epZ/kdSDudDOzG+3F4MuQ
/X3crXw2/jrhtWedGq49vFCONX4MKoaoudqK8kOFMe1ImQgkOYeAzOoqeFXyHsFh
jINlKTJZB6oKzrZ+SYryY14cO7pvGaIhyqaCC+6GcVihTjm9Yq13lP1lFj7LsVRV
aGfd6xH9RSV/mwzvZwD4i3cUWSUaV/wY0NDhAEzDPCUcxX0/nAj3XF1YeJUF30Qd
ETaCLo/Nxq2R6POK3c/Zm/FRLvjzZ2caD+q1LcwB/bCYdc2lJ1JDxE/hr48ANv0=
=OWXY
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
- scsi: improvements to error reporting and conversion to realize,
Coverity/sparse fix for iscsi driver
- RCU fallout: fix -daemonize and s390x system emulation
- KVM: kvm_stat improvements and new man page
- x86: SYSRET fix for VxWorks
# gpg: Signature made Tue Mar 10 10:18:45 2015 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
x86: fix SS selector in SYSRET
scsi: Convert remaining PCI HBAs to realize()
scsi: Improve error reporting for invalid drive property
hw: Propagate errors through qdev_prop_set_drive()
scsi: Clean up duplicated error in legacy if=scsi code
cpus: initialize cpu->memory_dispatch
rcu: handle forks safely
qemu-thread: do not use PTHREAD_MUTEX_ERRORCHECK
kvm_stat: add kvm_stat.1 man page
kvm_stat: add column headers to text UI
iscsi: Fix check for username
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Three kinds of callers:
1. On failure, report the error and abort
Passing &error_abort does the job. No functional change.
2. On failure, report the error and exit()
This is qdev_prop_set_drive_nofail(). Error reporting moves from
qdev_prop_set_drive() to its caller. Because hiding away the error
in the monitor right before exit() isn't helpful, replace
qerror_report_err() by error_report_err(). Shouldn't make a
difference, because qdev_prop_set_drive_nofail() should never be
used in QMP context.
3. On failure, report the error and recover
This is usb_msd_init() and scsi_bus_legacy_add_drive(). Error
reporting and freeing the error object moves from
qdev_prop_set_drive() to its callers.
Because usb_msd_init() can't run in QMP context, replace
qerror_report_err() by error_report_err() there.
No functional change.
scsi_bus_legacy_add_drive() calling qerror_report_err() is of
course inappropriate, but this commit merely makes it more obvious.
The next one will clean it up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-Id: <1425925048-15482-3-git-send-email-armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Added machvirt parsing of feature keywords added to the -cpu command line
option. Parsing occurs during machine initialization.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1423736974-14254-3-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we have a working "generic" PCIe host bridge driver, we can plug
it into ARM's virt machine to always have PCIe available to normal ARM VMs.
I've successfully managed to expose a Bochs VGA device, XHCI and an e1000
into an AArch64 VM with this and they all lived happily ever after.
Signed-off-by: Alexander Graf <agraf@suse.de>
Tested-by: Claudio Fontana <claudio.fontana@huawei.com>
[PMM: Squashed in fix for off-by-one error in bus-range DT property
from Laszlo Ersek <lersek@redhat.com>]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update to arm_cpu_reset() to reset into the highest available exception level
based on the set ARM features.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1422029835-4696-4-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch allows the board to specifiy the number of NVIC interrupt
lines when using armv7m_init.
Signed-off-by: Alistair Francis <alistair23@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 5a0b0fcc778df0340899f488053acc9493679e03.1422077994.git.alistair23@gmail.com
[PMM: removed stale FIXME comment]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch moves the memory region init code from the
armv7m_init function to the stellaris_init function
Signed-off-by: Alistair Francis <alistair23@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 4836be7e1d708554d6eb0bc639dc2fbf7dac0458.1422077994.git.alistair23@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The argument is not longer used and the implementation
uses now QOM instead of QemuOpts.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Message-id: 1420550957-22337-4-git-send-email-marcel@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The virt board already ensures mutual exclusion between -bios and -pflash
unit#0; we only need to set "bootinfo.firmware_loaded", introduced in the
previous patch, if either of those options was used to load the guest
firmware.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-12-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce the new boolean field "arm_boot_info.firmware_loaded". When this
field is set, it means that the portion of guest DRAM that the VCPU
normally starts to execute, or the pflash chip that the VCPU normally
starts to execute, has been populated by board-specific code with
full-fledged guest firmware code, before the board calls
arm_load_kernel().
Simultaneously, "arm_boot_info.firmware_loaded" guarantees that the board
code has set up the global firmware config instance, for arm_load_kernel()
to find with fw_cfg_find().
Guest kernel (-kernel) and guest firmware (-bios, -pflash) has always been
possible to specify independently on the command line. The following cases
should be considered:
nr -bios -pflash -kernel description
unit#0
-- ------- ------- ------- -------------------------------------------
1 present present absent Board code rejects this case, -bios and
present present present -pflash unit#0 are exclusive. Left intact
by this patch.
2 absent absent present Traditional kernel loading, with qemu's
minimal board firmware. Left intact by this
patch.
3 absent present absent Preexistent case for booting guest firmware
present absent absent loaded with -bios or -pflash. Left intact
by this patch.
4 absent absent absent Preexistent case for not loading any
firmware or kernel up-front. Left intact by
this patch.
5 present absent present New case introduced by this patch: kernel
absent present present image is passed to externally loaded
firmware in unmodified form, using fw_cfg.
An easy way to see that this patch doesn't interfere with existing cases
is to realize that "info->firmware_loaded" is constant zero at this point.
Which makes the "outer" condition unchanged, and the "inner" condition
(with the fw_cfg-related code) dead.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-11-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
fw_cfg already supports exposure over MMIO (used in ppc/mac_newworld.c,
ppc/mac_oldworld.c, sparc/sun4m.c); we can easily add it to the "virt"
board.
Because MMIO access is slow on ARM KVM, we enable the guest, with
fw_cfg_init_mem_wide(), to transfer up to 8 bytes with a single access.
This has been measured to speed up transfers up to 7.5-fold, relative to
single byte data access, on both ARM KVM and x86_64 TCG.
The MMIO register block of fw_cfg is advertized in the device tree. As
base address we pick 0x09020000, which conforms to the comment preceding
"a15memmap": it falls in the miscellaneous device I/O range 128MB..256MB,
and it is aligned at 64KB. The DTB properties follow the documentation in
the Linux source file "Documentation/devicetree/bindings/arm/fw-cfg.txt".
fw_cfg automatically exports a number of files to the guest; for example,
"bootorder" (see fw_cfg_machine_reset()).
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-9-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Disables the CPU ARM_FEATURE_EL3 featuere on machine models that can be
configured to use Cortex-A9, Cortex-A15, and ARM1176 but don't officially
support EL3. This preserves backwards compatibility.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418684992-8996-15-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit changes the integratorcp and versatilepb CPU initialization from
using the generic ARM cpu_arm_init function to doing it inline. This is
necessary in order to allow CPU configuration changes to occur between CPU
instance initialization and realization. Specifically, this change is in
preparation for disabling CPU EL3 support.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418684992-8996-14-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adds setting of the CPU has_el3 property based on the virt machine
secure state property during initialization. This enables/disables EL3
state during start-up. Changes include adding an additional secure state
boolean during virt CPU initialization. Also disables the ARM secure boot
by default.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Message-id: 1418684992-8996-13-git-send-email-greg.bellows@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adds setting of the CPU has_el3 property based on the vexpress machine
secure state property during initialization. This enables/disables EL3
state during start-up. Changes include adding an additional secure state
boolean during vexpress CPU initialization. Also enables the ARM secure boot
by default.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Message-id: 1418684992-8996-12-git-send-email-greg.bellows@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adds the secure_boot boolean field to the arm_boot_info descriptor. This
fields is used to indicate whether Linux should boot into secure or non-secure
state if the ARM EL3 feature is enabled. The default is to leave the CPU in an
unaltered reset state. On EL3 enabled systems, the reset state is secure and
can be overridden by setting the added field to false.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418684992-8996-11-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add "secure" virt machine specific property to allow override of the
default secure state configuration. By default, when using the QEMU
-kernel command line argument, virt machines boot into NS/SVC. When using
the QEMU -bios command line argument, virt machines boot into S/SVC.
The secure state can be changed from the default specifying the secure
state as a machine property. For example, the below command line would disable
security extensions on a -kernel Linux boot:
aarch64-softmmu/qemu-system-aarch64
-machine type=virt,secure=off
-kernel ...
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418684992-8996-8-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Switch virt qemu machine support to use the newer object type, class, and
instance model. Added virt TypeInfo with static registration along with virt
specific class and machine structs. Also added virt class initialization
method.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418684992-8996-7-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Change the Vexpress daughterboard initialization method to take a vexpress
machine state pointer instead of the daughterboard struct pointer. The machine
state now contains the daughterboard pointer.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418684992-8996-6-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add "secure" Vexpress machine specific property to allow override of the
default secure state configuration. By default, when using the QEMU
-kernel command line argument, Vexpress machines boot into NS/SVC. When using
the QEMU -bios command line argument, Vexpress machines boot into S/SVC.
The secure state can be changed from the default specifying the secure
state as a machine property. For example, the below command line would disable
security extensions on a -kernel Linux boot:
aarch64-softmmu/qemu-system-aarch64
-machine type=vexpress-a15,secure=off
-kernel ...
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418684992-8996-5-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Switched the Vexpress machine initialization to use the common function with
the machine pointer to board info.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418684992-8996-4-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add Vexpress machine objects for the the Cortex A9 & A15 variants. The older
style QEMUMachine types were replaced with dedicated TypeInfo objects. The new
objects include dedicated class init functions that currently ustilze dedicated
machine init methods. The previous qemu_register_machine calls were replaced
with the newer type_register_status calls.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418684992-8996-3-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adds base Vexpress class and machine objects and infrastructure. This is in
preparation for switching to the full QEMU object model. The base vexpress
infrastructure is intended to handle common vexpress details.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418684992-8996-2-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coverity reports the 'size' may be used uninitialized, but that can't happen,
because the caller has checked "if (binfo->dtb_filename || binfo->get_dtb)"
before call 'load_dtb'.
Here we simply remove the 'if (binfo->get_dtb)' to satisfy coverity.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Message-id: 1416826240-12368-1-git-send-email-zhang.zhanghailiang@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Variable 'ram_lo' is allocated unconditionally, but used only in some cases.
When it is unused pointer will be lost at function exit, resulting in a
memory leak. Allocate memory for 'ram_lo' only if it is needed.
Valgrind output:
==16879== 240 bytes in 1 blocks are definitely lost in loss record 6,033 of 7,018
==16879== at 0x4C2AB80: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==16879== by 0x33D2CE: malloc_and_trace (vl.c:2804)
==16879== by 0x509E610: g_malloc (in /lib/x86_64-linux-gnu/libglib-2.0.so.0.4000.0)
==16879== by 0x288836: realview_init (realview.c:55)
==16879== by 0x28988C: realview_pb_a8_init (realview.c:375)
==16879== by 0x341426: main (vl.c:4413)
Signed-off-by: Nikita Belov <zodiac@ispras.ru>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When EL3 is running in AArch32 (or ARMv7 with Security Extensions)
DACR has a secure and a non-secure instance. Adds definition for DACR32_EL2.
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1416242878-876-19-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adds secure and non-secure bank register suport for TTBR0 and TTBR1.
Changes include adding secure and non-secure instances of ttbr0 and ttbr1 as
well as a CP register definition for TTBR0_EL3. Added a union containing
both EL based array fields and secure and non-secure fields mapped to them.
Updated accesses to use A32_BANKED_CURRENT_REG_GET macro.
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1416242878-876-17-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ePAPR 1.1 defines the stdout-path property, making the os-specific
linux,stdout-path property redundant. Change the DT setup for ARM virt
to use the generic property - supported by Linux since 3.15.
The old QEMU behaviour was not present in any released version of
QEMU, and was only added to QEMU after the kernel changed, so
this should not break any existing setups.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
[PMM: add note to commit about the old behaviour never hving been
in a released version of QEMU]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Such address translation is needed when load address recorded in uImage
is a virtual address. When the actual load address is requested, return
untranslated address: user that needs the translated address can always
apply translation function to it and those that need it untranslated
don't need to do the inverse translation.
Add translation function pointer and its parameter to uimage_load
prototype. Update all existing users.
No user-visible functional changes.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Now that we have PSCI emulation, enable it for the virt platform.
This simplifies the virt machine a bit now that PSCI no longer
needs to be a KVM only feature.
Signed-off-by: Rob Herring <rob.herring@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1412865028-17725-8-git-send-email-peter.maydell@linaro.org
Move the registering of CPU reset handlers to before the point where
we leave the function in the -bios (not -kernel) case, so CPU reset
works correctly with -bios as well.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
check if the first cpu is an armv8 cpu, and if so, put
arm,armv8-timer in the compatible string list.
Note that due to this check, this patch moves the creation
of the timer fdt node to after the cpu creation loop.
Signed-off-by: Claudio Fontana <claudio.fontana@huawei.com>
Message-id: 1411736960-24206-1-git-send-email-hw.claudio@gmail.com
[PMM: updated to list arm,armv8-timer first]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Device models should access their block backends only through the
block-backend.h API. Convert them, and drop direct includes of
inappropriate headers.
Just four uses of BlockDriverState are left:
* The Xen paravirtual block device backend (xen_disk.c) opens images
itself when set up via xenbus, bypassing blockdev.c. I figure it
should go through qmp_blockdev_add() instead.
* Device model "usb-storage" prompts for keys. No other device model
does, and this one probably shouldn't do it, either.
* ide_issue_trim_cb() uses bdrv_aio_discard() instead of
blk_aio_discard() because it fishes its backend out of a BlockAIOCB,
which has only the BlockDriverState.
* PC87312State has an unused BlockDriverState[] member.
The next two commits take care of the latter two.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The patch is big, but all it really does is replacing
dinfo->bdrv
by
blk_bs(blk_by_legacy_dinfo(dinfo))
The replacement is repetitive, but the conversion of device models to
BlockBackend is imminent, and will shorten it to just
blk_legacy_dinfo(dinfo).
Line wrapping muddies the waters a bit. I also omit tests whether
dinfo->bdrv is null, because it never is.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
- Build: fixing block/iscsi.so and ranlib warnings on Mac OS X
- Migration fixes for x86
- The odd KVM patch.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=GIKW
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
- Memory: improve error reporting and avoid crashes on hotplug
- Build: fixing block/iscsi.so and ranlib warnings on Mac OS X
- Migration fixes for x86
- The odd KVM patch.
# gpg: Signature made Thu 11 Sep 2014 11:21:10 BST using RSA key ID 9B4D86F2
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: aka "Paolo Bonzini <bonzini@gnu.org>"
* remotes/bonzini/tags/for-upstream: (21 commits)
gdbstub: init mon_chr through qemu_chr_alloc
pckbd: adding new fields to vmstate
mc146818rtc: add missed field to vmstate
piix: do not set irq while loading vmstate
serial: fixing vmstate for save/restore
parallel: adding vmstate for save/restore
fdc: adding vmstate for save/restore
cpu: init vmstate for ticks and clock offset
apic_common: vapic_paddr synchronization fix
vl: use QLIST_FOREACH_SAFE to visit change state handlers
exec: add parameter errp to gethugepagesize
exec: report error when memory < hpagesize
hostmem-ram: don't exit qemu if size of memory-backend-ram is way too big
memory: add parameter errp to memory_region_init_rom_device
memory: add parameter errp to memory_region_init_ram
exec: add parameter errp to qemu_ram_alloc and qemu_ram_alloc_from_ptr
rules.mak: Fix DSO build by pulling in archive symbols
util: Don't link host-utils.o if it's empty
util: Move general qemu_getauxval to util/getauxval.c
trace: Only link generated-tracers.o with "simple" backend
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for loading DTB images when booting ELF images using
-kernel. If there are no conflicts with the placement of the ELF
segments, the DTB image is loaded at the base of RAM.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 1410453915-9344-5-git-send-email-ard.biesheuvel@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If we are running the 'virt' machine, we may have a device tree blob but no
kernel to supply it to if no -kernel option was passed. In that case, copy it
to the base of RAM where it can be picked up by a bootloader.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 1410453915-9344-4-git-send-email-ard.biesheuvel@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add an address limit input parameter to load_dtb() so that we can
tell load_dtb() how much memory the dtb is allowed to consume. If
the dtb doesn't fit, return 0, otherwise return the actual size of
the loaded dtb.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 1410453915-9344-3-git-send-email-ard.biesheuvel@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In order to make the device tree blob (DTB) available in memory not only at
first boot, but also after system reset, use rom_blob_add_fixed() to install
it into memory.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 1410453915-9344-2-git-send-email-ard.biesheuvel@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The pl011 and pl031 devices both use level triggered interrupts,
but the device tree we construct was incorrectly telling the
kernel to configure the GIC to treat them as edge triggered.
This meant that output from the pl011 would hang after a while.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1410274423-9461-1-git-send-email-peter.maydell@linaro.org
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Cc: qemu-stable@nongnu.org
Add two flash devices to the virt board, so that it can be used for
running guests which want a bootrom image such as UEFI. We provide
two flash devices to make it more convenient to provide both a
read-only UEFI image and a read-write place to store guest-set
UEFI config variables. The '-bios' command line option is set up
to provide an image for the first of the two flash devices.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1409930126-28449-2-git-send-email-ard.biesheuvel@linaro.org
Add a property "linux,stdout-path" to the /chosen DT node and make
it point to the emulated UART. This allows users such as the Linux
kernel to produce console output without the need to pass console=
or earlycon=pl011,0x... command line arguments.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 1409317439-29349-1-git-send-email-ard.biesheuvel@linaro.org
Reviewed-by: Rob Herring <rob.herring@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add parameter errp to memory_region_init_ram and update all call sites
to pass in &error_abort.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I'm running on a system with 8 cpus and it would be nice to have qemu
support all of them. The attached patch does that and has been tested.
That said, I'm not sure if 8 is enough or if we want to bump this even higher
now before systems with many more cpus come along. 255 anyone?
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Joel Schopp <joel.schopp@amd.com>
Message-id: 20140819213304.19537.2834.stgit@joelaarch64.amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It's a MemoryRegion and not an AddressSpace. But since it's single use,
just inline the get_system_memory() call to the only usage to remove it.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: d6914047e10b956514cfaa5f391ef56c7d851b34.1408347860.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This argument is a MemoryRegion and not an AddressSpace.
"Address space" means something quite different to "memory region"
in QEMU parlance so rename the variable to reduce confusion.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: f666cf7f2318d9b461b1e320a45bf0d82da9b7dd.1408347860.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On aarch64 it is the bootloader's job to uncompress the kernel. UEFI
and u-boot bootloaders do this automatically when the kernel is
gzip-compressed.
However the qemu -kernel option does not do this. The following
command does not work:
qemu-system-aarch64 [...] -kernel /boot/vmlinuz
because it tries to execute the gzip-compressed data.
This commit lets gzip-compressed kernels be uncompressed
transparently.
Currently this is only done when emulating aarch64.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1407831259-2115-3-git-send-email-rjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current code supplies the PSCI v0.1 function IDs in the DT even when
KVM uses PSCI v0.2.
This will break guest kernels that only support PSCI v0.1 as they will
use the IDs provided in the DT. Guest kernels with PSCI v0.2 support
are not affected by this patch, because they ignore the function IDs in
the device tree and rely on the architecture definition.
Define QEMU versions of the constants and check that they correspond to
the Linux defines on Linux build hosts. After this patch, both guest
kernels with PSCI v0.1 support and guest kernels with PSCI v0.2 should
work.
Tested on TC2 for 32-bit and APM Mustang for 64-bit (aarch64 guest
only). Both cases tested with 3.14 and linus/master and verified I
could bring up 2 cpus with both guest kernels. Also tested 32-bit with
a 3.14 host kernel with only PSCI v0.1 and both guests booted here as
well.
Cc: qemu-stable@nongnu.org
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The function IDs for PSCI v0.1 are exported by KVM and defined as
KVM_PSCI_FN_<something>. To build using these defines in non-KVM code,
QEMU defines these IDs locally and check their correctness against the
KVM headers when those are available.
However, the naming scheme used for QEMU (almost) clashes with the PSCI
v0.2 definitions from Linux so to avoid unfortunate naming when we
introduce local PSCI v0.2 defines, rename the current local defines with
QEMU_ prependend and clearly identify the PSCI version as v0.1 in the
defines.
Cc: qemu-stable@nongnu.org
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add some spacing and zeros to make it easier to read and
modify the map. This patch has no functional changes. The
review looks ugly, but it's actually pretty easy to confirm
all the addresses are as they should be - thanks to the new
formatting ;-)
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The code in do_cpu_reset() correctly handled AArch64 CPUs
when running Linux kernels, but was missing code in the
branch of the if() that deals with loading ELF files.
Correctly jump to the ELF entry point on reset rather than
leaving the reset PC at zero.
Reported-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Christopher Covington <cov@codeaurora.org>
Cc: qemu-stable@nongnu.org
pl031's base address should be 0x9010000, not 0x90010000, otherwise
it sits in ram when configuring a guest with greater than 1G.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make the vexpress-a9 board alias the first NOR flash region at
address zero, like vexpress-a15. This makes "-bios" actually usable
on this board.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1404310070-3561-1-git-send-email-peter.maydell@linaro.org
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
Replace qemu_allocate_irqs(foo, bar, 1)[0]
with qemu_allocate_irq(foo, bar, 0).
This avoids leaking the dereferenced qemu_irq *.
Cc: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
[PC Changes:
* Applied change to instance in sh4/sh7750.c
]
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Kirill Batuzov <batuzovk@ispras.ru>
[AF: Fix IRQ index in sh4/sh7750.c]
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
The pxa2xx-gpio device has a VMStateDescription, but it was accidentally
never actually registered, and it wasn't quite correct. Remove the
'lines' field (this is a device property, not mutable state), add the
missing 'prev_level' field, and set dc->vmsd so it actually gets used.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
The PXA2xx GPIO GPSR and GPCR registers are write-only, with reads being
undefined behaviour. Instead of having GPCR return 31337 and GPSR return
the value last written, make both log the guest error and return 0.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
The VMStateDescription structs for the GPIO and PPC devices were
accidentally never wired up. Add missing state fields and register
them via dc->vmsd.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
The StrongARM GPIO GPSR and GPCR registers are write-only, with reads being
undefined behaviour. Instead of having GPCR return 31337 and GPSR return
the value last written, make both log the guest error and return 0.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
UEFI mandates that the platform must include an RTC, so provide
one in 'virt', using the PL031. This is also useful for directly
booting Linux kernels which would otherwise have to run ntpdate.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
If we have PSCI v0.2 emulation available for KVM ARM/ARM64 or TCG then
we need to provide PSCI v0.2 compatible string via generated DTB.
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Signed-off-by: Anup Patel <anup.patel@linaro.org>
Reviewed-by: Rob Herring <rob.herring@linaro.org>
Message-id: 1402901605-24551-9-git-send-email-pranavkumar@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Detect attempts by the user to specify the contents of the first flash
device via both -bios and -drive if=pflash... simultaneously and
print a helpful error message.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1402419834-25982-1-git-send-email-peter.maydell@linaro.org
The Windows headers provided by MinGW define MOD_SHIFT. Avoid
it by using SPITZ_MOD_* for our constants here.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Right now to run firmware inside the QEMU VExpress model requires
padding out the firmware image to the size of the virtual flash and
passing it in via the -pflash argument. If the firmware image is passed
without padding, then QEMU will fail. Also, when passed as a -pflash
argument, QEMU treats the file as persistent storage and will modify the
file.
The -bios flag provides the semantics that we want for providing a
firmware image. This patch maps the contents of the -bios file into the
address space at the boot flash location.
Tested with the vexpress-a15 model and the Tianocore port.
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Tested-by: Roy Franz <roy.franz@linaro.org>
[PMM: folded long line, removed stray \n from error message,
use correct variable for printing image name, exit(1) rather than 0]
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ld_raw and st_raw definitions are only needed in code that
must compile for both user-mode and softmmu emulation. Device
models can use the equivalent ld_p/st_p which are simple
pointer accessors.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To get it out of the default GPIO list. This allows child devices to
use the un-named GPIO namespace without having to be SSI aware. That
is, there is no more need for machines to know about the obscure
policy where GPIO 0 is the SSI chip-select and GPIO 1..N are the
concrete class GPIOs (defined locally as 0..N-1).
This is most notable in stellaris, which uses a device which has both
SSI and concrete level GPIOs.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Total removal of QEMUMachineInitArgs struct. QEMUMachineInitArgs's fields
are copied into MachineState. Removed duplicated fields from MachineState.
All the other changes are only mechanical refactoring, no semantic changes.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> (s390)
Reviewed-by: Michael S. Tsirkin <mst@redhat.com> (PC)
[AF: Renamed ms -> machine, use MACHINE_GET_CLASS()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
We don't implement very much of the GPTM TAR register, and what we
do is wrong. The "are we in RT mode?" field is in s->config, not
s->control. Correct this, use LOG_UNIMP rather than hw_error()
for the cases we don't support, and avoid an unlabelled fallthrough
that makes Coverity complain.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
When writing to the YEARS_REG register, if the year value is
99 then the multiplication by 31536000 will overflow into
the sign bit of a 32 bit value and then be erroneously
sign-extended if time_t is 64 bits. Add a cast to avoid this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
After commit 767adce2d, they are redundant. This way we don't assign them
except when needed. Once there, there were lots of cases where the ".fields"
indentation was wrong:
.fields = (VMStateField []) {
and
.fields = (VMStateField []) {
Change all the combinations to:
.fields = (VMStateField[]){
The biggest problem (apart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.
Signed-off-by: Juan Quintela <quintela@redhat.com>
[PMM: fixed minor conflict, corrected commit message typos]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
CVE-2013-4533
s->rx_level is read from the wire and used to determine how many bytes
to subsequently read into s->rx_fifo[]. If s->rx_level exceeds the
length of s->rx_fifo[] the buffer can be overrun with arbitrary data
from the wire.
Fix this by validating rx_level against the size of s->rx_fifo.
Cc: Don Koch <dkoch@verizon.com>
Reported-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Don Koch <dkoch@verizon.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
For an AArch64 CPU which supports 64K pages, having the GIC
register banks at 4K offsets is potentially awkward. Move
them out to being at 64K offsets. (This is harmless for
AArch32 CPUs and for AArch64 CPUs with 4K pages, so it is simpler
to use the same offsets everywhere than to try to use 64K offsets
only for AArch64 host CPUs.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1398362083-17737-3-git-send-email-peter.maydell@linaro.org
Rather than having the virt machine model create an a15mpcore_priv
device regardless of the actual CPU type in order to instantiate the GIC,
move to having the machine model create the GIC directly. This
corresponds to a system which uses a standalone GIC (eg the GIC-400)
rather than the one built in to the CPU core.
The primary motivation for this is to support the Cortex-A57,
which for a KVM configuration will use a GICv2, which is not
built into the CPU.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1398362083-17737-2-git-send-email-peter.maydell@linaro.org
This implements the prescaler and source fields of the timer control
register. The source for each timer can be selected among 4 clock
inputs whose frequencies are set through model properties.
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1395771730-16882-6-git-send-email-b.galvani@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For the machine models which can have a Cortex-A15 CPU (vexpress-a15 and
midway), silently continue if the CPU object has no reset-cbar property
rather than failing. This allows these boards to be used under KVM with
the "-cpu host" option, since the 'host' CPU object has no reset-cbar
property.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Rob Herring <rob.herring@linaro.org>
If the user passes an unknown CPU name via the '-cpu' option, exit
with an error message rather than segfaulting.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Rob Herring <rob.herring@linaro.org>
Currently for both qemu-system-arm and qemu-system-aarch64
the default board model if the user doesn't specify one
is the 'integratorcp'. This is a totally arbitrary historical
accident since it was the first board to be modelled.
That board is now just one target among many for us, and
is a very poor choice of default:
* it's an ancient board that is now only found in the
junkpiles of longtime ARM/Linux hackers, if at all
* it's an ARMv5 CPU, when most distros are now assuming
ARMv7
* it's pretty much unmaintained in QEMU
* it doesn't even have versatilepb's advantage of
supporting PCI
Making it or any other board the default serves only
to confuse people new to ARM who expect something more
like the x86 monoculture. Remove the is_default marker
from integratorcp, and don't set it for any other board,
to give users a nudge that they need to think about
which board they want a QEMU model of. (QEMU will produce
the admittedly slightly cryptic error "No machine found.")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
When trying to load an ELF file specified via -kernel, we need to
pass load_elf() the ELF machine type corresponding to the CPU we're
booting with, not the one corresponding to the softmmu binary
we happen to be running. (The two are different in the case of
loading a 32-bit ARM ELF file into a 32 bit CPU being emulated
by qemu-system aarch64.) This was causing us to incorrectly fail
to load ELF images in this situation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1395427476-25546-1-git-send-email-peter.maydell@linaro.org
Set the reset-cbar property on CPUs used by the virt board,
if they have it. This isn't necessary for correct functioning
under Linux (since the A9 isn't a valid CPU for the virt board),
but it is the correct behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1394462692-8871-5-git-send-email-peter.maydell@linaro.org
Set the reset-cbar property of the Exynos4210 SoC's Cortex-A9
CPUs, so that Linux doesn't misrecognize them as a broken
uniprocessor SoC.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1394462692-8871-4-git-send-email-peter.maydell@linaro.org
If the CPU is a Cortex-A9 then we should set its reset-cbar property
so that the guest can read the correct PERIPHBASE/CBAR register value;
newer versions of the Linux kernel (as of commit bc41b8724 in 3.12)
will otherwise assume the CPU is a buggy single core A9 SoC. The
realview-pbx-a9 is the only one of the cluster of boards in realview.c
which works with the Cortex-A9 (ie which gets an a9mpcore_priv device);
make sure it also has reset-cbar set correctly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1394462692-8871-3-git-send-email-peter.maydell@linaro.org
Newer versions of the Linux kernel (as of commit bc41b8724 in 3.12)
now assume that if the CPU is a Cortex-A9 and the reset value of the
PERIPHBASE/CBAR register is zero then the CPU is a specific buggy
single core A9 SoC, and will not try to start other cores. Since we
now have a CPU property for the reset value of the CBAR, we can
just fix the vexpress board model to correctly set CBAR so SMP
works again. To avoid duplicate boilerplate code in both the A9
and A15 daughterboard init functions, we split out the CPU and
private memory region init to its own function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Rob Herring <rob.herring@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1394462692-8871-2-git-send-email-peter.maydell@linaro.org
Convert legacy ->qdev style casts from TYPE_SSI_SLAVE to TYPE_DEVICE.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
[AF: Introduce local DeviceState variable for transition to QOM realize]
Signed-off-by: Andreas Färber <afaerber@suse.de>
To avoid complication in code that otherwise would not need to
care about whether EL1 is AArch32 or AArch64, we should store
the interrupt mask bits (CPSR.AIF in AArch32 and PSTATE.DAIF
in AArch64) in one place consistently regardless of EL1's mode.
Since AArch64 has an extra enable bit (D for debug exceptions)
which isn't visible in AArch32, this means we need to keep
the enables in env->pstate. (This is also consistent with the
general approach we're taking that we handle 32 bit CPUs as
being like AArch64/ARMv8 CPUs but which only run in 32 bit mode.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Implement the AArch64 TTBR* registers. For v7 these were already 64 bits
to handle LPAE, but implemented as two separate uint32_t fields.
Combine them into a single uint64_t which can be used for all purposes.
Since this requires touching every use, take the opportunity to rename
the field to the architectural name.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
The ethernet device in the musicpal only has two tx queues,
but we modelled it with four CTDP registers, presumably a
cut and paste from the rx queue registers. Since the tx_queue[]
array is only 2 entries long this allowed a guest to overrun
this buffer. Remove the nonexistent registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1392737293-10073-1-git-send-email-peter.maydell@linaro.org
Acked-by: Jan Kiszka <jan.kiszka@web.de>
Cc: qemu-stable@nongnu.org
* Fix a bug causing an assertion in the NVIC on ARMv7M models
* More A64 Neon instructions
* Refactor cpreg API to separate out access check functions, as
groundwork for AArch64 system mode
* Fix bug in linux-user A64 store-exclusive of XZR
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=h/1p
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20140220' into staging
target-arm queue:
* Fix a bug causing an assertion in the NVIC on ARMv7M models
* More A64 Neon instructions
* Refactor cpreg API to separate out access check functions, as
groundwork for AArch64 system mode
* Fix bug in linux-user A64 store-exclusive of XZR
# gpg: Signature made Thu 20 Feb 2014 11:12:57 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20140220: (30 commits)
linux-user: AArch64: Fix exclusive store of the zero register
target-arm: A64: Implement unprivileged load/store
target-arm: A64: Implement narrowing three-reg-diff operations
target-arm: A64: Implement the wide 3-reg-different operations
target-arm: A64: Add most remaining three-reg-diff widening ops
target-arm: A64: Add opcode comments to disas_simd_three_reg_diff
target-arm: A64: Implement store-exclusive for system mode
target-arm: Fix incorrect type for value argument to write_raw_cp_reg
target-arm: Remove failure status return from read/write_raw_cp_reg
target-arm: Remove unnecessary code now read/write fns can't fail
target-arm: Drop success/fail return from cpreg read and write functions
target-arm: Convert miscellaneous reginfo structs to accessfn
target-arm: Convert generic timer reginfo to accessfn
target-arm: Convert performance monitor reginfo to accessfn
target-arm: Split cpreg access checks out from read/write functions
target-arm: Stop underdecoding ARM946 PRBS registers
target-arm: Log bad system register accesses with LOG_UNIMP
target-arm: Remove unused ARMCPUState sr substruct
target-arm: Restrict check_ap() use of S and R bits to v6 and earlier
target-arm: Define names for SCTLR bits
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All cpreg read and write functions now return 0, so we can clean up
their prototypes:
* write functions return void
* read functions return the value rather than taking a pointer
to write the value to
This is a fairly mechanical change which makes only the bare
minimum set of changes to the callers of read and write functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Replace usages of FROM_I2C_SLAVE() with QOM cast macro.
Rename the parent field. Reuse the type constant in z2_init().
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
[AF: Use TYPE_AER915 in z2_init() too]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Replace usages of FROM_I2C_SLAVE() with QOM cast macro.
Rename parent field. Use type constant in tosa_tg_init().
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Replace usages of FROM_I2C_SLAVE() and direct parent field accesses with
QOM cast macro. Rename parent field to assure we caught all. Reuse type
constant in pxa2xx_i2c_init().
Add some missing braces while at it.
Signed-off-by: Andreas Färber <afaerber@suse.de>
The VMSTATE_STRUCT_POINTER macros are a bit odd in that they
must be passed an argument "FooType *" rather than just taking
the FooType. They're only used in one place, so it's easy to
tidy this up. This also lets us use the macro to replace the
hand-rolled VMSTATE_PTIMER.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This patch uses the fact that the midr variable is now a property
This patch sets the midr variable to the boards custom midr
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: a3754b10d150af72e4688a993e484fa2b9b8fa21.1390176489.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The code which decides whether to set up the ATAGS data structure on
reset was using the wrong conditional, which meant we were creating
an ATAGS structure when doing a device-tree boot if the dtb was
autogenerated by the board. This is harmless, but unnecessary, so
bring it in to line with user-provided-dtb boots.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1388326833-656-1-git-send-email-peter.maydell@linaro.org
