Convert the TARGET_WORDS_BIGENDIAN macro, similarly to what was done
with HOST_BIG_ENDIAN. The new TARGET_BIG_ENDIAN macro is either 0 or 1,
and thus should always be defined to prevent misuse.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-8-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace a config-time define with a compile time condition
define (compatible with clang and gcc) that must be declared prior to
its usage. This avoids having a global configure time define, but also
prevents from bad usage, if the config header wasn't included before.
This can help to make some code independent from qemu too.
gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ For the s390x parts I'm involved in ]
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This bug is probably lurking there for so long, I cannot even git-blame
my way to the commit first introducing it.
Anyway, because n32 is also TARGET_MIPS64, the address space range
cannot be determined by looking at TARGET_MIPS64 alone. Fix this by only
declaring 48-bit address spaces for n64, or the n32 user emulation will
happily hand out memory ranges beyond the 31-bit limit and crash.
Confirmed to make the minimal reproducing example in the linked issue
behave.
Closes: https://gitlab.com/qemu-project/qemu/-/issues/939
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com>
Signed-off-by: WANG Xuerui <xen0n@gentoo.org>
Tested-by: Andreas K. Huettel <dilfridge@gentoo.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220328035942.3299661-1-xen0n@gentoo.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Since the previous commit 9ea89876f9d ("target/mips: Fix cycle
counter timing calculations"), MIPSCPU::cp0_count_rate is not
used anymore. We don't need it since it is already expressed
as mips_def_t::CCRes. Remove the duplicate and clean.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <>20211213102340.1847248-1-f4bug@amsat.org>
The cp0_count_ns value is calculated from the CP0_COUNT_RATE_DEFAULT
constant in target/mips/cpu.c. The cycle counter resolution is defined
per-CPU in target/mips/cpu-defs.c.inc; use this value for calculating
cp0_count_ns. Fixings timing problems on guest OSs for the 20Kc CPU
which has a CCRes of 1.
Signed-off-by: Simon Burge <simonb@NetBSD.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211213135125.18378-1-simonb@NetBSD.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
ArchCPU is our interface with target-specific code. Use it as
a forward-declared opaque pointer (abstract type), having its
structure defined by each target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-15-f4bug@amsat.org>
Replace the boilerplate code to declare CPU QOM types
and macros, and forward-declare the CPU instance type.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-14-f4bug@amsat.org>
While CPUState is our interface with generic code, CPUArchState is
our interface with target-specific code. Use CPUArchState as an
abstract type, defined by each target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-13-f4bug@amsat.org>
These target-specific files use the target-specific CPU state
but lack to include "cpu.h"; i.e.:
../target/riscv/pmp.h:61:23: error: unknown type name 'CPURISCVState'
void pmpcfg_csr_write(CPURISCVState *env, uint32_t reg_index,
^
../target/nios2/mmu.h:43:18: error: unknown type name 'CPUNios2State'
void mmu_flip_um(CPUNios2State *env, unsigned int um);
^
../target/microblaze/mmu.h:88:19: error: unknown type name 'CPUMBState'; did you mean 'CPUState'?
uint32_t mmu_read(CPUMBState *env, bool ea, uint32_t rn);
^~~~~~~~~~
CPUState
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-10-f4bug@amsat.org>
Many files use "qemu/log.h" declarations but neglect to include
it (they inherit it via "exec/exec-all.h"). "exec/exec-all.h" is
a core component and shouldn't be used that way. Move the
"qemu/log.h" inclusion locally to each unit requiring it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220207082756.82600-10-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Simplify cpu_loop by doing all of the decode in translate.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-18-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Simplify cpu_loop by doing all of the decode in translate.
This fixes a bug in that cpu_loop was not handling the
different layout of the R6 version of break16. This fixes
a bug in that cpu_loop extracted the wrong bits for the
mips16e break16 instruction.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-17-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Renaming defines for quad in their various forms so that their signedness is
now explicit.
Done using git grep as suggested by Philippe, with a bit of hand edition to
keep assignments aligned.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-2-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
FCR0_HAS2008 flag has been enabled in commit ba5c79f262
("target-mips: indicate presence of IEEE 754-2008 FPU in
R6/R5+MSA CPUs"), so remove the obsolete FIXME comment.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211028212103.2126176-1-f4bug@amsat.org>
When using the Loongson-3A4000 CPU, the MSAIR is returned with a
zero value (because unimplemented). Checking on real hardware,
this value appears incorrect:
$ cat /proc/cpuinfo
system type : generic-loongson-machine
machine : loongson,generic
cpu model : Loongson-3 V0.4 FPU V0.1
model name : Loongson-3A R4 (Loongson-3A4000) @ 1800MHz
isa : mips1 mips2 mips3 mips4 mips5 mips32r1 mips32r2 mips64r1 mips64r2
ASEs implemented : vz msa loongson-mmi loongson-cam loongson-ext loongson-ext2
...
Checking the CFCMSA opcode result with gdb we get 0x60140:
Breakpoint 1, 0x00000001200037c4 in main ()
1: x/i $pc
=> 0x1200037c4 <main+52>: cfcmsa v0,msa_ir
(gdb) si
0x00000001200037c8 in main ()
(gdb) i r v0
v0: 0x60140
MSAIR bits 17 and 18 are "reserved" per the spec revision 1.12,
so mask them out, and set MSAIR=0x0140 for the Loongson-3A4000
CPU model added in commit af868995e1.
Cc: Huacai Chen <chenhuacai@kernel.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211026180920.1085516-1-f4bug@amsat.org>
Only the MSA generic opcode was overlapping with the other
instructions. Since the previous commit removed it, we can
now remove the overlap group. The decodetree script forces
us to re-indent the opcodes.
Diff trivial to review using `git-diff --ignore-all-space`.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-32-f4bug@amsat.org>
All opcodes have been converted to decodetree. The generic
MSA handler is now pointless, remove it.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-31-f4bug@amsat.org>
Convert the CTCMSA (Copy To Control MSA register) opcode
to decodetree. Since it overlaps with the SLDI opcode,
use a decodetree overlap group.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-30-f4bug@amsat.org>
Convert the CFCMSA (Copy From Control MSA register) opcode
to decodetree. Since it overlaps with the SPLATI opcode,
use a decodetree overlap group.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-29-f4bug@amsat.org>
Convert the MOVE.V opcode (Vector Move) to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-28-f4bug@amsat.org>
Convert the COPY_S (Element Copy to GPR Signed) opcode
and INSERT (GPR Insert Element) opcode to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-27-f4bug@amsat.org>
Convert the COPY_U opcode (Element Copy to GPR Unsigned) to
decodetree.
Since the 'n' field is a constant value, use tcg_constant_i32()
instead of a TCG temporary.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211028210843.2120802-26-f4bug@amsat.org>
Convert instructions with an immediate element index
and data format df/n to decodetree.
Since the 'data format' and 'n' fields are constant values,
use tcg_constant_i32() instead of a TCG temporaries.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-25-f4bug@amsat.org>
Convert 3-register operations to decodetree.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-24-f4bug@amsat.org>
Convert BINSL (Vector Bit Insert Left) and BINSR (Vector Bit
Insert Right) opcodes to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-23-f4bug@amsat.org>
Convert 3-register operations to decodetree.
Per the Encoding of Operation Field for 3R Instruction Format'
(Table 3.25), these instructions are not defined for the BYTE
format. Therefore the TRANS_DF_iii_b() macro returns 'false'
in that case, because no such instruction is decoded.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211028210843.2120802-22-f4bug@amsat.org>
Convert 3-register operations to decodetree.
Since the 'data format' field is a constant value, use
tcg_constant_i32() instead of a TCG temporary.
Note, the format definition could be named @3rf_b (for
3R with a df field BYTE-based) but since the instruction
class is named '3R', we simply call the format @3r to
ease reviewing the msa.decode file.
However we directly call the trans_msa_3rf() function,
which handles the BYTE-based df field.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-21-f4bug@amsat.org>
Convert 3-register floating-point or fixed-point operations
to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-20-f4bug@amsat.org>
Convert 3-register floating-point or fixed-point operations
to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211028210843.2120802-19-f4bug@amsat.org>
Convert 3-register instructions with implicit data formats
to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-18-f4bug@amsat.org>
Convert 2-register operations to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-17-f4bug@amsat.org>
Convert the FILL opcode (Vector Fill from GPR) to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-16-f4bug@amsat.org>
Convert 2-register floating-point operations to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-15-f4bug@amsat.org>
Convert load/store instructions to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-14-f4bug@amsat.org>
Convert instructions with an 8-bit immediate value and either
implicit data format or data format df to decodetree.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-13-f4bug@amsat.org>
Convert the SHF opcode (Immediate Set Shuffle Elements) to decodetree.
Since the 'data format' field is a constant value, use
tcg_constant_i32() instead of a TCG temporary.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-12-f4bug@amsat.org>
Convert instructions with an immediate bit index and
data format df/m to decodetree.
Since the 'data format' field is a constant value, use
tcg_constant_i32() instead of a TCG temporary.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211028210843.2120802-11-f4bug@amsat.org>
Convert instructions with a 5-bit immediate value to decodetree.
Since the 'data format' field is a constant value, use
tcg_constant_i32() instead of a TCG temporary.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-10-f4bug@amsat.org>
Convert the LDI opcode (Immediate Load) to decodetree. Since it
overlaps with the generic MSA handler, use a decodetree overlap
group.
Since the 'data format' field is a constant value, use
tcg_constant_i32() instead of a TCG temporary.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-9-f4bug@amsat.org>
This 'shift amount' format is not always 16-bit, so name it
generically as 'sa'. This will help to unify the various
arg_msa decodetree generated structures.
Rename the @bz format -> @bz_v (specific @bz with df=3) and
@bz_df -> @bz (generic @bz).
Since we modify &msa_bz, re-align its arguments, so the other
structures added in the following commits stay visually aligned.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-8-f4bug@amsat.org>
Replace magic DataFormat value by the corresponding
enum from CPUMIPSMSADataFormat.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-7-f4bug@amsat.org>
Have check_msa_access() return a boolean value so we can
return early if MSA is not enabled (the instruction got
decoded properly, but we raised an exception).
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-6-f4bug@amsat.org>
The dup_const() helper makes the code easier to follow, use it.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211028210843.2120802-5-f4bug@amsat.org>
While the first 'off' variable assignment is unused, it helps
to better understand the code logic. Move the assignation where
it would have been used so it is easier to compare the MSA
registers based on FPU ones versus the MSA specific registers.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211023214803.522078-34-f4bug@amsat.org>
The result of the 'Vector Multiply and Subtract' opcode is
incorrect with Byte vectors. Probably due to a copy/paste error,
commit 5f148a0232 mistakenly used the $wt (target register)
instead of $wd (destination register) as first operand. Fix that.
Cc: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com>
Fixes: 5f148a0232 ("target/mips: msa: Split helpers for MSUBV.<B|H|W|D>")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-3-f4bug@amsat.org>
The result of the 'Vector Multiply and Add' opcode is incorrect
with Byte vectors. Probably due to a copy/paste error, commit
7a7a162add mistakenly used the $wt (target register) instead
of $wd (destination register) as first operand. Fix that.
Cc: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com>
Fixes: 7a7a162add ("target/mips: msa: Split helpers for MADDV.<B|H|W|D>")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211028210843.2120802-2-f4bug@amsat.org>
The fallback code in cpu_loop_exit_sigsegv is sufficient
for mips linux-user.
This means we can remove tcg/user/tlb_helper.c entirely.
Remove the code from cpu_loop that raised SIGSEGV.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since gen_mipsdsp_accinsn() got added in commit b53371ed5d
("target-mips: Add ASE DSP accumulator instructions"), the
'v2_t' TCG temporary has never been used. Remove it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211014224551.2204949-1-f4bug@amsat.org>
While for the DEXTR_S.H opcode:
"The shift argument is provided in the instruction."
For the DEXTRV_S.H opcode we have:
"The five least-significant bits of register rs provide the
shift argument, interpreted as a five-bit unsigned integer;
the remaining bits in rs are ignored."
While 't1' contains the 'rs' register content (the shift value
for DEXTR_S.H), we need to load the value of 'rs' for DEXTRV_S.H.
We can directly use the v1_t TCG register which already contains
this shift value.
Fixes: b53371ed5d ("target-mips: Add ASE DSP accumulator instructions")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211013215652.1764551-1-f4bug@amsat.org>
The offset is constant and read-only: move it to the constant pool.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211003175743.3738710-9-f4bug@amsat.org>
We already use sextract32(), use extract32() for completeness
instead of open-coding it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211003175743.3738710-7-f4bug@amsat.org>
Avoid using a TCG temporary by moving Data Format to the constant pool.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211003175743.3738710-6-f4bug@amsat.org>
Avoid using a TCG temporary by moving Data Format to the constant pool.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211003175743.3738710-5-f4bug@amsat.org>
Avoid using a TCG temporary by moving Data Format to the constant pool.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211003175743.3738710-4-f4bug@amsat.org>
Data Format is a 2-bit constant value.
Avoid using a TCG temporary by moving it to the constant pool.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211003175743.3738710-3-f4bug@amsat.org>
Commits cbe50b9a8e ("target-mips: add MSA VEC/2R format instructions")
and 3bdeb68866 ("target-mips: add MSA 2RF format instructions") added
the MSA 2R/2RF instructions. However these instructions don't use any
target vector register, so remove the unused TCG temporaries.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211003175743.3738710-2-f4bug@amsat.org>
Per the "MIPS Architecture Extension: nanoMIPS32 DSP TRM" rev 0.04,
MULT and MULTU opcodes:
The value of ac selects an accumulator numbered from 0 to 3.
When ac=0, this refers to the original HI/LO register pair of the
MIPS32 architecture.
In Release 6 of the MIPS Architecture, accumulators are eliminated
from MIPS32.
Ensure pre-Release 6 is restricted to HI/LO registers pair.
Fixes: 8b3698b294 ("target/mips: Add emulation of DSP ASE for nanoMIPS - part 4")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
GDB single-stepping is now handled generically.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As per an ancient comment in mips_tr_translate_insn about the
expectations of gdb, when restarting the insn in a delay slot
we also re-execute the branch. Which means that we are
expected to execute two insns in this case.
This has been broken since 8b86d6d258, where we forced max_insns
to 1 while single-stepping. This resulted in an exit from the
translator loop after the branch but before the delay slot is
translated.
Increase the max_insns to 2 for this case. In addition, bypass
the end-of-page check, for when the branch itself ends the page.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rather than use 4-16 separate operations, use 2 operations
plus some byte reordering as necessary.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We should not have been using the helper_ret_* set of
functions, as they are supposed to be private to tcg.
Nor should we have been using the plain cpu_*_data set
of functions, as they do not handle unwinding properly.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We're about to move this out of tcg.h, so rename it
as we did when moving MemOp.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While we may have had some thought of allowing system-mode
to return from this hook, we have no guests that require this.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is nothing target specific about this. The implementation
is host specific, but the declaration is 100% common.
Reviewed-By: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Restrict cpu_exec_interrupt() and its callees to sysemu.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210911165434.531552-15-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
[rth: Split out of a larger patch.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add the inlined cpu_is_bigendian() function in "translate.h".
Replace the TARGET_WORDS_BIGENDIAN #ifdef'ry by calls to
cpu_is_bigendian().
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210818164321.2474534-6-f4bug@amsat.org>
Most TCG helpers only have access to a DisasContext pointer,
not CPUMIPSState. Store a copy of CPUMIPSState::CP0_Config0
in DisasContext so we can access it from TCG helpers.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210818164321.2474534-5-f4bug@amsat.org>
The target endianess information is stored in the BigEndian
bit of the Config0 register in CP0.
Replace the GET_LMASK() macro by an inlined get_lmask() function,
passing CPUMIPSState and the word size as argument.
We can remove another use of the TARGET_WORDS_BIGENDIAN definition.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210818215517.2560994-4-f4bug@amsat.org>
The target endianess information is stored in the BigEndian
bit of the Config0 register in CP0.
Replace the GET_LMASK() macro by an inlined get_lmask() function,
passing CPUMIPSState and the word size as argument.
We can remove one use of the TARGET_WORDS_BIGENDIAN definition.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210818215517.2560994-3-f4bug@amsat.org>
The target endianess information is stored in the BigEndian
bit of the Config0 register in CP0.
As a first step, inline the GET_OFFSET() macro, calling
cpu_is_bigendian() to get the 'direction' of the offset.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210818215517.2560994-2-f4bug@amsat.org>
To be able to split some code calling the gen_helper() macros
out of the huge translate.c, we need to define them in the
'translate.h' local header.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210816205107.2051495-9-f4bug@amsat.org>
excp/err are temporaries input, so we can replace tcg_const_i32()
calls by tcg_constant_i32() equivalent.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210816205107.2051495-8-f4bug@amsat.org>
gen_helper_0e0i() is one-line long and is only used twice:
simply inline it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210816205107.2051495-7-f4bug@amsat.org>
gen_helper_1e1i() is one-line long and is used in one place:
simply inline it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210816205107.2051495-6-f4bug@amsat.org>
In all call sites the last argument is always used as a
read-only value, so we can replace tcg_const_i32() temporary
by tcg_constant_i32().
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210816205107.2051495-5-f4bug@amsat.org>
$rt register is used read-only, so we can replace tcg_const_i32()
temporary by tcg_constant_i32().
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210816205107.2051495-4-f4bug@amsat.org>
gen_helper_1e2i() is unused since commit 33a07fa2db
("target/mips: reimplement SC instruction emulation
and use cmpxchg"), remove it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210816205107.2051495-3-f4bug@amsat.org>
gen_helper_0e3i() is unused since commit 895c2d0435
("target-mips: switch to AREG0 free mode"), remove it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210816205107.2051495-2-f4bug@amsat.org>
We already call check_cp1_enabled() earlier in the "pre-conditions"
checks for GSLWXC1 and GSLDXC1 in gen_loongson_lsdc2() prologue.
Remove the duplicated calls.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Message-Id: <20210816001031.1720432-1-f4bug@amsat.org>
Per the manual '龙芯 GS264 处理器核用户手册' v1.0, chapter
1.1.5 SEGBITS: the 3A1000 (based on GS464 core) implements
48 virtual address bits in each 64-bit segment, not 40.
Fixes: af868995e1 ("target/mips: Add Loongson-3 CPU definition")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Message-Id: <20210813110149.1432692-3-f4bug@amsat.org>
Document the cores on which each Loongson-3A CPU is based (see
commit af868995e1, "target/mips: Add Loongson-3 CPU definition").
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Message-Id: <20210813110149.1432692-2-f4bug@amsat.org>
Convert the following Integer Multiply-Accumulate opcodes:
* MSAC Multiply, negate, accumulate, and move LO
* MSACHI Multiply, negate, accumulate, and move HI
* MSACHIU Unsigned multiply, negate, accumulate, and move HI
* MSACU Unsigned multiply, negate, accumulate, and move LO
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210808173018.90960-8-f4bug@amsat.org>
Convert the following Integer Multiply-Accumulate opcodes:
* MULHI Multiply and move HI
* MULHIU Unsigned multiply and move HI
* MULS Multiply, negate, and move LO
* MULSHI Multiply, negate, and move HI
* MULSHIU Unsigned multiply, negate, and move HI
* MULSU Unsigned multiply, negate, and move LO
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210808173018.90960-7-f4bug@amsat.org>
Convert the following Integer Multiply-Accumulate opcodes:
* MACC Multiply, accumulate, and move LO
* MACCHI Multiply, accumulate, and move HI
* MACCHIU Unsigned multiply, accumulate, and move HI
* MACCU Unsigned multiply, accumulate, and move LO
Since all opcodes are generated using the same pattern, we
add the gen_helper_mult_acc_t typedef and MULT_ACC() macro
to remove boilerplate code.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210808173018.90960-6-f4bug@amsat.org>
The decoder is called but doesn't decode anything. This will
ease reviewing the next commit.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210801235926.3178085-3-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Extract NEC Vr54xx helpers from op_helper.c to a new file:
'vr54xx_helper.c'.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201120210844.2625602-14-f4bug@amsat.org>
Extract the NEC Vr54xx helper definitions to
'vendor-vr54xx_helper.h'.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201120210844.2625602-15-f4bug@amsat.org>
Plain copy/paste of the TRANS() macro introduced in the PPC
commit f2aabda8ac ("target/ppc: Move D/DS/X-form integer
loads to decodetree") to the MIPS target.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210808173018.90960-2-f4bug@amsat.org>
We'll soon have more opcode and decoded arguments, and 'rtype'
is not very helpful. Naming it simply 'r' ease reviewing the
.decode files when we have many opcodes.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210801234202.3167676-5-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We don't need to maintain 2 sets of decodetree definitions.
Merge them into a single file.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210801234202.3167676-4-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
In commit ffc672aa97 ("target/mips/tx79: Move MFHI1 / MFLO1
opcodes to decodetree") we misplaced the decoder call. Move
it to the correct place.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210801234202.3167676-3-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
check_insn() checks for any bit in the set, and INSN_R5900 is
just another bit added to the set. No need to special-case it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210801234202.3167676-2-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
JR opcode (Jump Register) only takes 1 argument, $rs.
JALR (Jump And Link Register) takes 3: $rs, $rd and $hint.
Commit 6af0bf9c7c added their processing into decode_opc() as:
case 0x08 ... 0x09: /* Jumps */
gen_compute_branch(ctx, op1 | EXT_SPECIAL, rs, rd, sa);
having both opcodes handled in the same function: gen_compute_branch.
Per JR encoding, both $rd and $hint ('sa') are decoded as zero.
Later this code got extracted to decode_opc_special(),
commit 7a387fffce used definitions instead of magic values:
case OPC_JR ... OPC_JALR:
gen_compute_branch(ctx, op1, rs, rd, sa);
Finally commit 0aefa33318 moved OPC_JR out of decode_opc_special,
to a new 'decode_opc_special_legacy' function:
@@ -15851,6 +15851,9 @@ static void decode_opc_special_legacy(CPUMIPSState *env, DisasContext *ctx)
+ case OPC_JR:
+ gen_compute_branch(ctx, op1, 4, rs, rd, sa);
+ break;
@@ -15933,7 +15936,7 @@ static void decode_opc_special(CPUMIPSState *env, DisasContext *ctx)
- case OPC_JR ... OPC_JALR:
+ case OPC_JALR:
gen_compute_branch(ctx, op1, 4, rs, rd, sa);
break;
Since JR is now handled individually, it is pointless to decode
and pass it unused arguments. Replace them by simple zero value
to avoid confusion with this opcode.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210730225507.2642827-1-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The hook is now unused, with breakpoints checked outside translation.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Linking on Haiku OS fails:
/boot/system/develop/tools/bin/../lib/gcc/x86_64-unknown-haiku/8.3.0/../../../../x86_64-unknown-haiku/bin/ld:
error: libqemu-mips-softmmu.fa.p/target_mips_tcg_sysemu_mips-semi.c.o(.rodata) is too large (0xffff405a bytes)
/boot/system/develop/tools/bin/../lib/gcc/x86_64-unknown-haiku/8.3.0/../../../../x86_64-unknown-haiku/bin/ld:
final link failed: memory exhausted
collect2: error: ld returned 1 exit status
This is because the host_to_mips_errno[] uses errno as index,
for example:
static const uint16_t host_to_mips_errno[] = {
[ENAMETOOLONG] = 91,
...
and Haiku defines [*] ENAMETOOLONG as:
12 /* Error baselines */
13 #define B_GENERAL_ERROR_BASE INT_MIN
..
22 #define B_STORAGE_ERROR_BASE (B_GENERAL_ERROR_BASE + 0x6000)
...
106 #define B_NAME_TOO_LONG (B_STORAGE_ERROR_BASE + 4)
...
211 #define ENAMETOOLONG B_TO_POSIX_ERROR(B_NAME_TOO_LONG)
so the array ends up beeing indeed too big.
Since POSIX errno can't be use as indexes on Haiku,
rewrite errno_mips() using a switch statement.
[*] https://github.com/haiku/haiku/blob/r1beta3/headers/os/support/Errors.h#L130
Reported-by: Richard Zak <richard.j.zak@gmail.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210706130723.1178961-1-f4bug@amsat.org>
Introduce the SQ opcode (Store Quadword).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-27-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Introduce the LQ opcode (Load Quadword) and remove unreachable code.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-26-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Introduce the PPACW opcode (Parallel Pack to Word).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-22-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Introduce the 'Parallel Compare for Greater Than' opcodes:
- PCGTB (Parallel Compare for Greater Than Byte)
- PCGTH (Parallel Compare for Greater Than Halfword)
- PCGTW (Parallel Compare for Greater Than Word)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210309145653.743937-15-f4bug@amsat.org>
Introduce the PEXTUW opcode (Parallel Extend Upper from Word).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210309145653.743937-12-f4bug@amsat.org>
Do not emit dead code for the singlestep_enabled case,
after having exited the TB with a debug exception.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Just use translator_use_goto_tb directly at the one call site,
rather than maintaining a local wrapper.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The root trace-events only declares a single TCG event:
$ git grep -w tcg trace-events
trace-events:115:# tcg/tcg-op.c
trace-events:137:vcpu tcg guest_mem_before(TCGv vaddr, uint16_t info) "info=%d", "vaddr=0x%016"PRIx64" info=%d"
and only a tcg/tcg-op.c uses it:
$ git grep -l trace_guest_mem_before_tcg
tcg/tcg-op.c
therefore it is pointless to include "trace-tcg.h" in each target
(because it is not used). Remove it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210629050935.2570721-1-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a target-specific Kconfig. We need the definitions in Kconfig so
the minikconf tool can verify they exits. However CONFIG_FOO is only
enabled for target foo via the meson.build rules.
Two architecture have a particularity, ARM and MIPS. As their
translators have been split you can potentially build a plain 32 bit
build along with a 64-bit version including the 32-bit subset.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210131111316.232778-6-f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707131744.26027-2-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extract 4900 lines from the huge translate.c to a new file,
'nanomips_translate.c.inc'. As there are too many inter-
dependencies we don't compile it as another object, but
keep including it in the big translate.o. We gain in code
maintainability.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201120210844.2625602-13-f4bug@amsat.org>
Extract 3200+ lines from the huge translate.c to a new file,
'micromips_translate.c.inc'. As there are too many inter-
dependencies we don't compile it as another object, but
keep including it in the big translate.o. We gain in code
maintainability.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201120210844.2625602-12-f4bug@amsat.org>
Extract 1100+ lines from the huge translate.c to a new file,
'mips16e_translate.c.inc'. As there are too many inter-
dependencies we don't compile it as another object, but
keep including it in the big translate.o. We gain in code
maintainability.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201120210844.2625602-10-f4bug@amsat.org>
We want to extract the microMIPS ISA and Code Compaction ASE to
new compilation units.
We will first extract this code as included source files (.c.inc),
then make them new compilation units afterward.
The following methods are going to be used externally:
micromips_translate.c.inc:1778: gen_ldxs(ctx, rs, rt, rd);
micromips_translate.c.inc:1806: gen_align(ctx, 32, rd, rs, ...
micromips_translate.c.inc:2859: gen_addiupc(ctx, reg, offset, ...
mips16e_translate.c.inc:444: gen_addiupc(ctx, ry, offset, ...
To avoid too much code churn, it is simpler to declare these
prototypes in "translate.h" now.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210617174907.2904067-2-f4bug@amsat.org>
There were two bugs here: (1) the required endianness was
not present in the MemOp, and (2) we were not providing a
zero-extended input to the bswap as semantics required.
The best fix is to fold the bswap into the memory operation,
producing the desired result directly.
Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Implement the new semantics in the fallback expansion.
Change all callers to supply the flags that keep the
semantics unchanged locally.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We don't need to maintain 2 sets of decodetree definitions.
Merge them into a single file.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210617174636.2902654-3-f4bug@amsat.org>
Only trans_MSA() calls gen_msa(), inline it to simplify.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210617174636.2902654-2-f4bug@amsat.org>
Since all entries are no more than 3/4/6 bytes (including nul
terminator), can save space and pie runtime relocations by
declaring regnames[] as array of 3/4/6 const char.
Inspired-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210617174323.2900831-10-f4bug@amsat.org>
Keep host_to_mips_errno[] in .rodata by marking the array const.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210617174323.2900831-9-f4bug@amsat.org>
Per the "MIPS® Architecture Extension: nanoMIPS32 DSP Technical
Reference Manual — Revision 0.04" p. 88 "BPOSGE32C", offset argument (imm)
should be left-shifted first.
This change was tested against test_dsp_r1_bposge32.c DSP test.
Reported-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com>
Signed-off-by: Filip Vidojevic <filip.vidojevic@syrmia.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <VI1PR0302MB34869449EE56F226FC3C21129C309@VI1PR0302MB3486.eurprd03.prod.outlook.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
These switch cases for the microMIPS BPOSGE32 / BPOSGE64 opcodes have
been added commit 3c824109da ("target-mips: microMIPS ASE support").
More than 11 years later it is safe to assume there won't be added
soon. The cases fall back to the default which generates a RESERVED
INSTRUCTION, so it is safe to remove them.
Functionally speaking, the patch is a no-op.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210617174323.2900831-8-f4bug@amsat.org>
These placeholder comments for SmartMIPS and MDMX extensions have
been added commit 3c824109da ("target-mips: microMIPS ASE support").
More than 11 years later it is safe to assume there won't be added
soon, so remove these unuseful comments.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210617174323.2900831-7-f4bug@amsat.org>
Commit 043715d1e0 ("target/mips: Update ITU to utilize SAARI
and SAAR CP0 registers") declared itc_reconfigure() in public
namespace, while it is restricted to system emulation.
Similarly commit 5679479b9a ("target/mips: Move CP0 helpers
to sysemu/cp0.c") restricted cpu_mips_soft_irq() definition to
system emulation, but forgot to restrict its declaration.
To avoid polluting user-mode emulation with these declarations,
restrict them to sysemu. Also restrict the sysemu ITU/ITC/IRQ
fields from CPUMIPSState.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210617174323.2900831-6-f4bug@amsat.org>
We moved various TCG source files in commit a2b0a27d33
("target/mips: Move TCG source files under tcg/ sub directory")
but forgot to move the header declaring their prototypes.
Do it now, since all it declares is TCG specific.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210617174323.2900831-5-f4bug@amsat.org>
Commit a2b0a27d33 ("target/mips: Move TCG source files under
tcg/ sub directory") forgot to move the trace-event file.
As it only contains TCG events, move it for consistency.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210617174323.2900831-4-f4bug@amsat.org>
On real hardware an invalid instruction doesn't halt the world,
but usually triggers a RESERVED INSTRUCTION exception.
TCG guest code shouldn't abort QEMU anyway.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210617174323.2900831-2-f4bug@amsat.org>
Per the "MIPS® DSP Module for MIPS64 Architecture" manual, rev. 3.02,
Table 5.3 "SPECIAL3 Encoding of Function Field for DSP Module":
If the Module/ASE is not implemented, executing such an instruction
must cause a Reserved Instruction Exception.
The DINSV instruction lists the following exceptions:
- Reserved Instruction
- DSP Disabled
If the MIPS core doesn't support the DSP module, or the DSP is
disabled, do not handle the '$rt = $0' case as a no-op but raise
the proper exception instead.
Cc: Jia Liu <proljc@gmail.com>
Fixes: 1cb6686cf9 ("target-mips: Add ASE DSP bit/manipulation instructions")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210529165443.1114402-1-f4bug@amsat.org>
Fix multiple TCG temporary leaks in gen_pool32a5_nanomips_insn().
Fixes: 3285a3e444 ("target/mips: Add emulation of DSP ASE for nanoMIPS - part 1")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210617174323.2900831-3-f4bug@amsat.org>
Fix a pair of TCG temporary leak when translating nanoMIPS SHILO opcode.
Fixes: 3285a3e444 ("target/mips: Add emulation of DSP ASE for nanoMIPS")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210530094538.1275329-1-f4bug@amsat.org>
Use the BIT_ULL() macro to ensure we use 64-bit arithmetic.
This fixes the following Coverity issue (OVERFLOW_BEFORE_WIDEN):
CID 1452921: Integer handling issues:
Potentially overflowing expression "1 << w" with type "int"
(32 bits, signed) is evaluated using 32-bit arithmetic, and
then used in a context that expects an expression of type
"uint64_t" (64 bits, unsigned).
Fixes: 074cfcb4da ("target/mips: Implement hardware page table walker")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210505215119.1517465-1-f4bug@amsat.org>
Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We no longer have any runtime modifications to this struct,
so declare them all const.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20210227232519.222663-3-richard.henderson@linaro.org>
Add a flag to MIPSCPUClass in order to avoid needing to
replace mips_tcg_ops.do_transaction_failed.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20210227232519.222663-2-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-21-f4bug@amsat.org>
[rth: Drop declaration movement from target/*/cpu.h]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Migration is specific to system emulation.
- Move the CPUClass::vmsd field to SysemuCPUOps,
- restrict VMSTATE_CPU() macro to sysemu,
- vmstate_dummy is now unused, remove it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-16-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Introduce a structure to hold handler specific to sysemu.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-15-f4bug@amsat.org>
[rth: Squash "restrict hw/core/sysemu-cpu-ops.h" patch]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Quoting Peter Maydell [*]:
There are two ways to handle migration for
a CPU object:
(1) like any other device, so it has a dc->vmsd that covers
migration for the whole object. As usual for objects that are a
subclass of a parent that has state, the first entry in the
VMStateDescription field list is VMSTATE_CPU(), which migrates
the cpu_common fields, followed by whatever the CPU's own migration
fields are.
(2) a backwards-compatible mechanism for CPUs that were
originally migrated using manual "write fields to the migration
stream structures". The on-the-wire migration format
for those is based on the 'env' pointer (which isn't a QOM object),
and the cpu_common part of the migration data is elsewhere.
cpu_exec_realizefn() handles both possibilities:
* for type 1, dc->vmsd is set and cc->vmsd is not,
so cpu_exec_realizefn() does nothing, and the standard
"register dc->vmsd for a device" code does everything needed
* for type 2, dc->vmsd is NULL and so we register the
vmstate_cpu_common directly to handle the cpu-common fields,
and the cc->vmsd to handle the per-CPU stuff
You can't change a CPU from one type to the other without breaking
migration compatibility, which is why some guest architectures
are stuck on the cc->vmsd form. New targets should use dc->vmsd.
To avoid new targets to start using type (2), rename cc->vmsd as
cc->legacy_vmsd. The correct field to implement is dc->vmsd (the
DeviceClass one).
See also commit b170fce3dd ("cpu: Register VMStateDescription
through CPUState") for historic background.
[*] https://www.mail-archive.com/qemu-devel@nongnu.org/msg800849.html
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210517105140.1062037-13-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This behavior is currently hard-coded in parts_silence_nan,
but setting this bit properly will allow this to be cleaned up.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
To ease maintenance, move all TCG specific files under the tcg/
sub-directory. Adapt the Meson machinery.
The following prototypes:
- mips_tcg_init()
- mips_cpu_do_unaligned_access()
- mips_cpu_do_transaction_failed()
can now be restricted to the "tcg-internal.h" header.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-29-f4bug@amsat.org>
Opcodes accessing Coprocessor 0 are privileged.
Move the CP0 helpers to sysemu/ and simplify the #ifdef'ry.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-28-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-27-f4bug@amsat.org>
Move helper_cache() to tcg/sysemu/special_helper.c.
The CACHE opcode is privileged and is not accessible in user
emulation. However we get a link failure when restricting the
symbol to sysemu. For now, add a stub helper to satisfy linking,
which abort if ever called.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-25-f4bug@amsat.org>
Move the Special opcodes helpers to tcg/sysemu/special_helper.c.
Since mips_io_recompile_replay_branch() is set as
CPUClass::io_recompile_replay_branch handler in cpu.c,
we need to declare its prototype in "tcg-internal.h".
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-24-f4bug@amsat.org>
The 3 map_address() handlers are local to tlb_helper.c,
no need to have their prototype declared publically.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-23-f4bug@amsat.org>
Move tlb_helper.c to the tcg/sysemu/ subdir, along with
the following 3 declarations to tcg-internal.h:
- cpu_mips_tlb_flush()
- cpu_mips_translate_address()
- r4k_invalidate_tlb()
Simplify tlb_helper.c #ifdef'ry because files in tcg/sysemu/
are only build when sysemu mode is configured.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-22-f4bug@amsat.org>
mmu_init() is only required by TCG accelerator.
Restrict its declaration and call to TCG.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-21-f4bug@amsat.org>
Move cp0_helper.c and mips-semi.c to the new tcg/sysemu/ folder,
adapting the Meson machinery.
Move the opcode definitions to tcg/sysemu_helper.h.inc.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-20-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-19-f4bug@amsat.org>
Declare get_physical_address() with local scope and move it along
with mips_cpu_get_phys_page_debug() to sysemu/physaddr.c new file.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-18-f4bug@amsat.org>
Move sysemu-specific files under the new sysemu/ subfolder
and adapt the Meson machinery.
Update the KVM MIPS entry in MAINTAINERS.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-17-f4bug@amsat.org>
We have 2 blocks guarded with #ifdef for sysemu, which
are simply separated by the cpu_signal_handler definition.
To simplify the following commits which involve various
changes in internal.h, first join the sysemu-guarded blocks.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-16-f4bug@amsat.org>
tlb_helper.c's #ifdef'ry hides a quite simple user-mode
implementation of mips_cpu_tlb_fill().
Copy the user-mode implementation (without #ifdef'ry) to
tcg/user/helper.c and simplify tlb_helper.c's #ifdef'ry.
This will allow us to restrict tlb_helper.c to sysemu.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-15-f4bug@amsat.org>
The #ifdef'ry hides that the user-mode implementation of
mips_cpu_do_interrupt() simply sets exception_index = EXCP_NONE.
Add this simple implementation to tcg/user/tlb_helper.c, and
the corresponding Meson machinery to build this file when user
emulation is configured.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-14-f4bug@amsat.org>
We will gradually move TCG-specific declarations to a new local
header: "tcg-internal.h". To keep review simple, first add this
header with 2 TCG prototypes, which we are going to move in the
next 2 commits.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-13-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-11-f4bug@amsat.org>
Currently cpu_mips_translate_address() calls raise_mmu_exception(),
and do_translate_address() calls cpu_loop_exit_restore().
This API split is dangerous, we could call cpu_mips_translate_address
without returning to the main loop.
As there is only one caller, it is trivial (and safer) to merge
do_translate_address() back to cpu_mips_translate_address().
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-10-f4bug@amsat.org>
Rename set_pc() as mips_env_set_pc(), declare it inlined
and use it in cpu.c and op_helper.c.
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210428170410.479308-9-f4bug@amsat.org>
Turn printfpr() macro into a proper function: fpu_dump_fpr().
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-8-f4bug@amsat.org>
As mips_cpu_dump_state() is only used once to initialize the
CPUClass::dump_state handler, we can move it to cpu.c to keep
it symbol local.
Beside, this handler is used by all accelerators, while the
translate.c file targets TCG.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-7-f4bug@amsat.org>
Since all entries are no more than 4 bytes (including nul
terminator), can save space and pie runtime relocations by
declaring regnames[] as array of 4 const char.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-6-f4bug@amsat.org>
The CPU/FPU regnames[] arrays is used in mips_tcg_init() and
mips_cpu_dump_state(), which while being in translate.c is
not specific to TCG.
To be able to move mips_cpu_dump_state() to cpu.c, which is
compiled for all accelerator, we need to make the regnames[]
arrays global to target/mips/ by declaring them in "internal.h".
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-5-f4bug@amsat.org>
mips_cpu_reset() is used by all accelerators, and calls
msa_reset(), which is defined in msa_helper.c.
Beside msa_reset(), the rest of msa_helper.c is only useful
to the TCG accelerator. To be able to restrict this helper
file to TCG, we need to move msa_reset() out of it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-4-f4bug@amsat.org>
restore_msa_fp_status() is declared inlined in fpu_helper.h,
and uses the ieee_rm[] array. Therefore any code calling
restore_msa_fp_status() must have access to this ieee_rm[] array.
kvm_mips_get_fpu_registers(), which is in target/mips/kvm.c,
calls restore_msa_fp_status.
Except this tiny array, the rest of fpu_helper.c is only useful
for the TCG accelerator.
To be able to restrict fpu_helper.c to TCG, we need to move the
ieee_rm[] array to a new source file.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-3-f4bug@amsat.org>
We already have the mips_tcg_ss source set for TCG-specific files,
use it for mxu_translate.c and tx79_translate.c to simplify a bit.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-2-f4bug@amsat.org>
To avoid callers to emit dead code if check_cp0_enabled()
raise an exception, let it return a boolean value, whether
CP0 is enabled or not.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210420193453.1913810-4-f4bug@amsat.org>
When running with '-d unimp' all MTHC0 opcode executed
are logged as unimplemented... Add the proper 'return'
statement missed from commit 5204ea79ea.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210422081055.2349216-1-f4bug@amsat.org>
The CACHEE opcode "requires CP0 privilege".
The pseudocode checks in the ISA manual is:
if is_eva and not C0.Config5.EVA:
raise exception('RI')
if not IsCoprocessor0Enabled():
raise coprocessor_exception(0)
Add the missing checks.
Inspired-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210420175426.1875746-1-f4bug@amsat.org>
When adding this file and its new content in commit 3f7a927847
("target/mips: LSA/DLSA R6 decodetree helpers") I did 2 mistakes:
1: Listed authors who haven't been involved in its development,
2: Used an incorrect GNU GPLv2 license text (using 'and' instead
of 'or').
Instead of correcting the GNU GPLv2 license text, replace the license
by the 'GNU LGPL v2.1 or later' one, to be coherent with the other
translation files in the target/mips/ folder.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210420100633.1752440-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix a TCG temporary leak when translating CACHE opcode.
Fixes: 0d74a222c2 ("make ITC Configuration Tags accessible to the CPU")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210406202857.1440744-1-f4bug@amsat.org>
Coverity reported (CID 1450831) an array overrun in
gen_mxu_D16MAX_D16MIN():
1103 } else if (unlikely((XRb == 0) || (XRa == 0))) {
....
1112 if (opc == OPC_MXU_D16MAX) {
1113 tcg_gen_smax_i32(mxu_gpr[XRa - 1], t0, t1);
1114 } else {
1115 tcg_gen_smin_i32(mxu_gpr[XRa - 1], t0, t1);
1116 }
>>> Overrunning array "mxu_gpr" of 15 8-byte elements at element
index 4294967295 (byte offset 34359738367) using index "XRa - 1U"
(which evaluates to 4294967295).
This happens because the code is confused about which of XRa, XRb and
XRc is the output, and which are the inputs. XRa is the output, but
most of the conditions separating out different special cases are
written as if XRc is the output, with the result that we can end up
in the code path that assumes XRa is non-0 even when it is zero.
Fix the erroneous code, bringing it in to line with the structure
used in functions like gen_mxu_S32MAX_S32MIN() and
gen_mxu_Q8MAX_Q8MIN().
Fixes: CID 1450831
Fixes: bb84cbf385
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210316131353.4533-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This comment describing the tx79 opcodes is helpful. As we
will implement these instructions in tx79_translate.c, move
the comment there.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-15-f4bug@amsat.org>
We have almost 400 lines of code full of /* TODO */ comments
which end calling gen_reserved_instruction().
As we are not going to implement them, and all the caller's
switch() default cases already call gen_reserved_instruction(),
we can remove this altogether.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-14-f4bug@amsat.org>
Simplify the PCPYH (Parallel Copy Halfword) instruction by using
multiple calls to deposit_i64() which can be optimized by some
TCG backends.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-11-f4bug@amsat.org>
We will use gen_rdhwr() outside of translate.c, make it public.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-28-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-10-f4bug@amsat.org>
Introduce decodetree structure to decode the tx79 opcodes.
Start it by moving the existing MFHI1 and MFLO1 opcodes.
Remove unnecessary comments.
As the TX79 share opcodes with the TX19/TX39/TX49 CPUs,
we introduce the decode_ext_txx9() dispatcher where we
will add the other decoders later.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-9-f4bug@amsat.org>
Extract 1600+ lines from the big translate.c into a new file.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-14-f4bug@amsat.org>
Extract the MXU register initialization code from mips_tcg_init()
as a new mxu_translate_init() helper. Make it public and replace
!TARGET_MIPS64 ifdef'ry by the 'TARGET_LONG_BITS == 32' check to
elide this code at preprocessing time.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-13-f4bug@amsat.org>
By making the prototype public and checking
'TARGET_LONG_BITS == 32' we let the compiler
elide the decode_opc_mxu() call.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-12-f4bug@amsat.org>
To easily convert MXU code to decodetree, making it return a boolean.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-11-f4bug@amsat.org>
Use "decode_{isa,ase,ext}_$name()" function name pattern for
public decodetree entrypoints.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-10-f4bug@amsat.org>
Move the check for MUL opcode from decode_opc_mxu() callee
to decode_opc_legacy() caller, so we can simplify the ifdef'ry
and elide the call in few commits.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-9-f4bug@amsat.org>
We already have a macro and definition to extract / check
the Special2 MUL opcode. Use it instead of the unnecessary
OPC__MXU_MUL macro.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-8-f4bug@amsat.org>
In the next commit we'll make decode_opc_mxu() match decodetree
prototype by returning a boolean. First pass ctx->opcode as an
argument.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-7-f4bug@amsat.org>
None of these MXU functions use their CPUMIPSState* env argument,
remove it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-6-f4bug@amsat.org>
All these unimplemented MXU opcodes end up calling
gen_reserved_instruction() which is the default switch
case in decode_opc_mxu().
The translate.c file is already big enough and hard to maintain,
remove 1300 lines of unnecessary code and /* TODO */ comments.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-5-f4bug@amsat.org>
