Add a flag to control the version of CIE that is generated. By
default gas produces CIE version 1, and this continues to be the
default after this patch.
However, a user can now provide --gdwarf-cie-version=NUMBER to switch
to either version 3 or version 4 of CIE, version 2 was never released,
and so causes an error as does any number less than 1 or greater than
4.
Producing version 4 CIE requires two new fields to be added to the
CIE, an address size field, and an segment selector field. For a flat
address space the DWARF specification indicates that the segment
selector should be 0, and the address size fields just contains the
address size in bytes. For now we support 4 or 8 byte addresses, and
the segment selector is always produced as 0. At some future time we
might need to allow targets to override this.
gas/ChangeLog:
* as.c (parse_args): Parse --gdwarf-cie-version option.
(flag_dwarf_cie_version): New variable.
* as.h (flag_dwarf_cie_version): Declare.
* dw2gencfi.c (output_cie): Switch from DW_CIE_VERSION to
flag_dwarf_cie_version.
* doc/as.texi (Overview): Document --gdwarf-cie-version.
* NEWS: Likewise.
* testsuite/gas/cfi/cfi.exp: Add new tests.
* testsuite/gas/cfi/cie-version-0.d: New file.
* testsuite/gas/cfi/cie-version-1.d: New file.
* testsuite/gas/cfi/cie-version-2.d: New file.
* testsuite/gas/cfi/cie-version-3.d: New file.
* testsuite/gas/cfi/cie-version-4.d: New file.
* testsuite/gas/cfi/cie-version.s: New file.
include/ChangeLog:
* dwarf2.h (DW_CIE_VERSION): Delete.
Change-Id: I9de19461aeb8332b5a57bbfe802953d0725a7ae8
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch introduces the Matrix Multiply (Int8, F32, F64) extensions
to the arm backend.
The following Matrix Multiply instructions are added: vummla, vsmmla,
vusmmla, vusdot, vsudot[1].
[1]https://developer.arm.com/docs/ddi0597/latest/simd-and-floating-point-instructions-alphabetic-order
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* config/tc-arm.c (arm_ext_i8mm): New feature set.
(do_vusdot): New.
(do_vsudot): New.
(do_vsmmla): New.
(do_vummla): New.
(insns): Add vsmmla, vummla, vusmmla, vusdot, vsudot mnemonics.
(armv86a_ext_table): Add i8mm extension.
(arm_extensions): Move bf16 extension to context sensitive table.
(armv82a_ext_table, armv84a_ext_table, armv85a_ext_table):
Move bf16 extension to context sensitive table.
(armv86a_ext_table): Add i8mm extension.
* doc/c-arm.texi: Document i8mm extension.
* testsuite/gas/arm/i8mm.s: New test.
* testsuite/gas/arm/i8mm.d: New test.
* testsuite/gas/arm/bfloat17-cmdline-bad-3.d: Update test.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* opcode/arm.h (ARM_EXT2_I8MM): New feature macro.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* arm-dis.c (neon_opcodes): Add i8mm SIMD instructions.
Regression tested on arm-none-eabi.
Is this ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch introduces the Matrix Multiply (Int8, F32, F64) extensions
to the aarch64 backend.
The following instructions are added: {s/u}mmla, usmmla, {us/su}dot,
fmmla, ld1rob, ld1roh, d1row, ld1rod, uzip{1/2}, trn{1/2}.
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* config/tc-aarch64.c: Add new arch fetures to suppport the mm extension.
(parse_operands): Add new operand.
* testsuite/gas/aarch64/i8mm.s: New test.
* testsuite/gas/aarch64/i8mm.d: New test.
* testsuite/gas/aarch64/f32mm.s: New test.
* testsuite/gas/aarch64/f32mm.d: New test.
* testsuite/gas/aarch64/f64mm.s: New test.
* testsuite/gas/aarch64/f64mm.d: New test.
* testsuite/gas/aarch64/sve-movprfx-mm.s: New test.
* testsuite/gas/aarch64/sve-movprfx-mm.d: New test.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_I8MM): New.
(AARCH64_FEATURE_F32MM): New.
(AARCH64_FEATURE_F64MM): New.
(AARCH64_OPND_SVE_ADDR_RI_S4x32): New.
(enum aarch64_insn_class): Add new instruction class "aarch64_misc" for
instructions that do not require special handling.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* aarch64-tbl.h (aarch64_feature_i8mm_sve, aarch64_feature_f32mm_sve,
aarch64_feature_f64mm_sve, aarch64_feature_i8mm, aarch64_feature_f32mm,
aarch64_feature_f64mm): New feature sets.
(INT8MATMUL_INSN, F64MATMUL_SVE_INSN, F64MATMUL_INSN,
F32MATMUL_SVE_INSN, F32MATMUL_INSN): New macros to define matrix multiply
instructions.
(I8MM_SVE, F32MM_SVE, F64MM_SVE, I8MM, F32MM, F64MM): New feature set
macros.
(QL_MMLA64, OP_SVE_SBB): New qualifiers.
(OP_SVE_QQQ): New qualifier.
(INT8MATMUL_SVE_INSNC, F64MATMUL_SVE_INSNC,
F32MATMUL_SVE_INSNC): New feature set for bfloat16 instructions to support
the movprfx constraint.
(aarch64_opcode_table): Support for SVE_ADDR_RI_S4x32.
(aarch64_opcode_table): Define new instructions smmla,
ummla, usmmla, usdot, sudot, fmmla, ld1rob, ld1roh, ld1row, ld1rod
uzip{1/2}, trn{1/2}.
* aarch64-opc.c (operand_general_constraint_met_p): Handle
AARCH64_OPND_SVE_ADDR_RI_S4x32.
(aarch64_print_operand): Handle AARCH64_OPND_SVE_ADDR_RI_S4x32.
* aarch64-dis-2.c (aarch64_opcode_lookup_1, aarch64_find_next_opcode):
Account for new instructions.
* opcodes/aarch64-asm-2.c (aarch64_insert_operand): Support the new
S4x32 operand.
* aarch64-opc-2.c (aarch64_operands): Support the new S4x32 operand.
Regression tested on arm-none-eabi.
Is it ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch introduces BFloat16 instructions to the arm backend.
The following BFloat16 instructions are added: vdot, vfma{l/t},
vmmla, vfmal{t/b}, vcvt, vcvt{t/b}.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-arm.c (arm_archs): Add armv8.6-a option.
(cpu_arch_ver): Add TAG_CPU_ARCH_V8 tag for Armv8.6-a.
* doc/c-arm.texi (-march): New armv8.6-a arch.
* config/tc-arm.c (arm_ext_bf16): New feature set.
(enum neon_el_type): Add NT_bfloat value.
(B_MNEM_vfmat, B_MNEM_vfmab): New bfloat16 encoder
helpers.
(BAD_BF16): New message.
(parse_neon_type): Add bf16 type specifier.
(enum neon_type_mask): Add N_BF16 type.
(type_chk_of_el_type): Account for NT_bfloat.
(el_type_of_type_chk): Account for N_BF16.
(neon_three_args): Split out from neon_three_same.
(neon_three_same): Part split out into neon_three_args.
(CVT_FLAVOUR_VAR): Add bf16_f32 cvt flavour.
(do_neon_cvt_1): Account for vcvt.bf16.f32.
(do_bfloat_vmla): New.
(do_mve_vfma): New function to deal with the mnemonic clash between the BF16
vfmat and the MVE vfma in a VPT block with a 't'rue condition.
(do_neon_cvttb_1): Account for vcvt{t,b}.bf16.f32.
(do_vdot): New
(do_vmmla): New
(insns): Add vdot and vmmla mnemonics.
(arm_extensions): Add "bf16" extension.
* doc/c-arm.texi: Document "bf16" extension.
* testsuite/gas/arm/attr-march-armv8_6-a.d: New test.
* testsuite/gas/arm/bfloat16-bad.d: New test.
* testsuite/gas/arm/bfloat16-bad.l: New test.
* testsuite/gas/arm/bfloat16-bad.s: New test.
* testsuite/gas/arm/bfloat16-cmdline-bad-2.d: New test.
* testsuite/gas/arm/bfloat16-cmdline-bad-3.d: New test.
* testsuite/gas/arm/bfloat16-cmdline-bad.d: New test.
* testsuite/gas/arm/bfloat16-neon.s: New test.
* testsuite/gas/arm/bfloat16-non-neon.s: New test.
* testsuite/gas/arm/bfloat16-thumb-bad.d: New test.
* testsuite/gas/arm/bfloat16-thumb-bad.l: New test.
* testsuite/gas/arm/bfloat16-thumb.d: New test.
* testsuite/gas/arm/bfloat16-vfp.d: New test.
* testsuite/gas/arm/bfloat16.d: New test.
* testsuite/gas/arm/bfloat16.s: New test.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/arm.h (ARM_EXT2_V8_6A, ARM_AEXT2_V8_6A,
ARM_ARCH_V8_6A): New.
* opcode/arm.h (ARM_EXT2_BF16): New feature macro.
(ARM_AEXT2_V8_6A): Include above macro in definition.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* arm-dis.c (select_arm_features): Update bfd_march_arm_8 with
Armv8.6-A.
(coprocessor_opcodes): Add bfloat16 vcvt{t,b}.
(neon_opcodes): Add bfloat SIMD instructions.
(print_insn_coprocessor): Add new control character %b to print
condition code without checking cp_num.
(print_insn_neon): Account for BFloat16 instructions that have no
special top-byte handling.
Regression tested on arm-none-eabi.
Is it ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch introduces the following BFloat16 instructions to the
aarch64 backend: bfdot, bfmmla, bfcvt, bfcvtnt, bfmlal[t/b],
bfcvtn2.
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (vectype_to_qualifier): Special case the
S_2H operand qualifier.
* doc/c-aarch64.texi: Document bf16 and bf16mmla4 extensions.
* testsuite/gas/aarch64/bfloat16.d: New test.
* testsuite/gas/aarch64/bfloat16.s: New test.
* testsuite/gas/aarch64/illegal-bfloat16.d: New test.
* testsuite/gas/aarch64/illegal-bfloat16.l: New test.
* testsuite/gas/aarch64/illegal-bfloat16.s: New test.
* testsuite/gas/aarch64/sve-bfloat-movprfx.s: New test.
* testsuite/gas/aarch64/sve-bfloat-movprfx.d: New test.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_BFLOAT16): New feature macros.
(AARCH64_ARCH_V8_6): Include BFloat16 feature macros.
(enum aarch64_opnd_qualifier): Introduce new operand qualifier
AARCH64_OPND_QLF_S_2H.
(enum aarch64_insn_class): Introduce new class "bfloat16".
(BFLOAT16_SVE_INSNC): New feature set for bfloat16
instructions to support the movprfx constraint.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm.c (aarch64_ins_reglane): Use AARCH64_OPND_QLF_S_2H
in reglane special case.
* aarch64-dis-2.c (aarch64_opcode_lookup_1,
aarch64_find_next_opcode): Account for new instructions.
* aarch64-dis.c (aarch64_ext_reglane): Use AARCH64_OPND_QLF_S_2H
in reglane special case.
* aarch64-opc.c (struct operand_qualifier_data): Add data for
new AARCH64_OPND_QLF_S_2H qualifier.
* aarch64-tbl.h (QL_BFDOT QL_BFDOT64, QL_BFDOT64I, QL_BFMMLA2,
QL_BFCVT64, QL_BFCVTN64, QL_BFCVTN2_64): New qualifiers.
(aarch64_feature_bfloat16, aarch64_feature_bfloat16_sve,
aarch64_feature_bfloat16_bfmmla4): New feature sets.
(BFLOAT_SVE, BFLOAT): New feature set macros.
(BFLOAT_SVE_INSN, BFLOAT_BFMMLA4_INSN, BFLOAT_INSN): New macros
to define BFloat16 instructions.
(aarch64_opcode_table): Define new instructions bfdot,
bfmmla, bfcvt, bfcvtnt, bfdot, bfdot, bfcvtn, bfmlal[b/t]
bfcvtn2, bfcvt.
Regression tested on aarch64-elf.
Is it ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
to binutils.
This first patch adds the Armv8.6-A flag to binutils.
No instructions are behind it at the moment.
Commited on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (armv8.6-a): New arch.
* doc/c-aarch64.texi (armv8.6-a): Document new arch.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_V8_6): New.
(AARCH64_ARCH_V8_6): New.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-tbl.h (ARMV8_6): New macro.
Is it ok for trunk?
Regards,
Mihail
So far z15 was identified as arch13. After the machine has been
announced we can now add the real name.
gas/ChangeLog:
2019-10-08 Andreas Krebbel <krebbel@linux.ibm.com>
* config/tc-s390.c (s390_parse_cpu): Add z15 as alternate CPU
name.
* doc/as.texi: Add z15 to CPU string list.
* doc/c-s390.texi: Likewise.
opcodes/ChangeLog:
2019-10-08 Andreas Krebbel <krebbel@linux.ibm.com>
* s390-mkopc.c (main): Enable z15 as CPU string in the opcode
table.
This functionality will generate a new GNU object attribute for the "data region"
has been added. This object attribute is used
mark whether the compiler has generated code assuming that data could be in the
upper or lower memory regions.
Code which assumes data is always in the lower memory region is incompatible
with code which uses the full memory range for data.
The patch also adds a new assembler directive ".mspabi_attribute" to handle the
existing MSPABI object attributes. GCC will now emit both .gnu_attribute and
.mspabi_attribute directives to indicate what options the source file was
compiled with.
The assembler will now check the values set in these directives against the
options that the it has been invoked with. If there is a discrepancy, the
assembler will exit with an error.
bfd * elf32-msp430.c (elf32_msp430_merge_mspabi_attributes): Rename to..
(elf32_msp430_merge_msp430_attributes): Add support for merging the GNU
object attribute for data region.
binutils* readelf.c (display_msp430_gnu_attribute): New.
(process_arch_specific): Use msp430 specific handler for GNU
attributes.
gas * config/tc-msp430.c (md_parse_option): Set lower_data_region_only to
FALSE if the data region is set to "upper", "either" or "none".
(msp430_object_attribute): New.
(md_pseudo_table): Handle .mspabi_attribute and .gnu_attribute.
(msp430_md_end): Replace hard-coded attribute values with enums.
Handle data region object attribute.
* doc/as.texi: Document MSP430 Data Region object attribute.
* doc/c-msp430.texi: Document the .mspabi_attribute directive.
* testsuite/gas/msp430/attr-430-small-bad.d: New test.
* testsuite/gas/msp430/attr-430-small-bad.l: New test.
* testsuite/gas/msp430/attr-430-small-good.d: New test.
* testsuite/gas/msp430/attr-430-small.s: New test.
* testsuite/gas/msp430/attr-430x-large-any-bad.d: New test.
* testsuite/gas/msp430/attr-430x-large-any-bad.l: New test.
* testsuite/gas/msp430/attr-430x-large-any-good.d: New test.
* testsuite/gas/msp430/attr-430x-large-any.s: New test.
* testsuite/gas/msp430/attr-430x-large-lower-bad.d: New test.
* testsuite/gas/msp430/attr-430x-large-lower-bad.l: New test.
* testsuite/gas/msp430/attr-430x-large-lower-good.d: New test.
* testsuite/gas/msp430/attr-430x-large-lower.s: New test.
* testsuite/gas/msp430/msp430.exp: Run new tests.
include * elf/msp430.h: Add enums for MSPABI and GNU object attribute tag names
and values.
ld * testsuite/ld-msp430-elf/attr-gnu-main.s: New test.
* testsuite/ld-msp430-elf/attr-gnu-obj.s: New test.
* testsuite/ld-msp430-elf/attr-gnu-region-lower-upper.d: New test.
* testsuite/ld-msp430-elf/attr-gnu-region-lower.d: New test.
* testsuite/ld-msp430-elf/attr-gnu-region-upper.d: New test.
* testsuite/ld-msp430-elf/msp430-elf.exp: Run new tests.
I get some spurious changes when running autoconf/automake for various
projects in the tree. This is likely because they were generated using
distro-patched tools last time.
I ran `autoreconf -f` in the various automake projects of the
binutils-gdb tree, and this is the result. The tools I am using have
been compiled from source, from the upstream release.
bfd/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
binutils/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gas/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gold/ChangeLog:
* testsuite/Makefile.in: Re-generate.
gprof/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
ld/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
opcodes/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
This patch adds support for following CPUs:
Cortex-M35P, Cortex-A77, Cortex-A76AE.
Related specifications can be found at https://developer.arm.com/ip-products/processors.
gas/ChangeLog:
* config/tc-arm.c: New entries for Cortex-M35P, Cortex-A77,
and Cortex-A76AE.
* doc/c-arm.texi: Document new processors.
* testsuite/gas/arm/cpu-cortex-a76ae.d: New test.
* testsuite/gas/arm/cpu-cortex-a77.d: New test.
* testsuite/gas/arm/cpu-cortex-m35p.d: New test.
bfd/ChangeLog:
* cpu-arm.c: New entries for Cortex-M35P, Cortex-A77, Cortex-A76AE.
The syntax of the directive is:
.float16 <0-n decimal numbers>
e.g.
.float16 0.5
.float16 10.2, NaN, 452.09
The floats will always be encoded using the binary16 format as described in the
IEEE 754-2008 standard. There is no need to support Arm's alternative half-precision
format since AArch64 only supports the IEEE format.
gas * config/tc-aarch64.c: Add float16 directive and add "Hh" to
acceptable float characters.
* doc/c-aarch64.texi: Documentation for float16 directive.
* testsuite/gas/aarch64/float16-be.d: New test.
* testsuite/gas/aarch64/float16-le.d: New test.
* testsuite/gas/aarch64/float16.s: New test.
* NEWS: Add NEWS entry.
Related specifications can be found at
https://developer.arm.com/ip-products/processors.
gas * NEWS: Mention the Arm and AArch64 new processors.
* config/tc-aarch64.c: New entries for Cortex-A34, Cortex-A65,
Cortex-A77, cortex-A65AE, and Cortex-A76AE.
* doc/c-aarch64.texi: Document new CPUs.
* testsuite/gas/aarch64/cpu-cortex-a34.d: New test.
* testsuite/gas/aarch64/cpu-cortex-a65.d: New test.
* testsuite/gas/aarch64/cpu-cortex-a65ae.d: New test.
* testsuite/gas/aarch64/cpu-cortex-a76ae.d: New test.
* testsuite/gas/aarch64/cpu-cortex-a77.d: New test.
* testsuite/gas/aarch64/nop-asm.s: New test.
bfd * cpu-aarch64.c: New entries for Cortex-A34, Cortex-A65,
Cortex-A77, cortex-A65AE, and Cortex-A76AE.
Half precision floating point numbers will be encoded using the IEEE 754
half precision floating point format - 16 bits in total, 1 for sign, 5
for exponent and 10 bits of mantissa.
This patch implements the float16 directive for both the IEEE 754 format
and the Arm alternative format for the Arm backend.
The syntax of the directive is:
.float16 <0-n decimal numbers>
e.g.
.float16 12.0
.float16 0.23, 433.1, 0.06
The Arm alternative format is almost identical to the IEEE 754 format,
except that it doesn't encode for NaNs or Infinity (instead an exponent
of 0x1F represents a normalized number in the range 65536 to 131008).
The alternative format is documented in the reference manual:
https://static.docs.arm.com/ddi0487/db/DDI0487D_b_armv8_arm.pdf?_ga=2.72318806.49764181.1561632697-999473562.1560847439
Which format is used is controlled by the .float16_format <format>
directive, where if <format> = ieee, then use the IEEE 754
half-precision format else if <format> = alternative, then use the
Arm alternative format
Or the format can be set on the command line via the -mfp16-format
option that has a similar syntax. -mfp16-format=<ieee|alternative>.
This also fixes the format and it cannot be changed by any directives.
Once the format has been set (either by the command line option or a directive) it cannot be changed,
and any attempts to change it (i.e. with the float16_format directive) will result in a warning and the
line being ignored.
For ELF targets the appropriate EABI attribute will be written out at the end of assembling
if the format has been explicitly specified. If no format has been explicitly specified then no
EABI attributes will be written.
If the format is not explicitly specified then any float16 directives are encoding using the IEEE 754-2008
format by default until the format is fixed or changed with the float16_format directive.
gas * config/tc-arm.c (enum fp_16bit_format): Add enum to represent the 2 float16 encodings.
(md_atof): Set precision for float16 type.
(arm_is_largest_exponent_ok): Check for whether to encode with the IEEE or alternative
format.
(set_fp16_format): Parse a float16_format directive.
(arm_parse_fp16_opt): Parse the fp16-format command line option.
(aeabi_set_public_attributes): For ELF encode the FP16 format EABI attribute.
* config/tc-arm.h (TC_LARGEST_EXPONENT_IS_NORMAL): Macro that expands to
arm_is_largest_exponent_ok.
(arm_is_largest_exponent_ok): Add prototype for arm_is_largest_exponent_ok function.
* doc/c-arm.texi: Add documentation for .float16, .float16_format and -mfp16-format=
* testsuite/gas/arm/float16-bad.d: New test.
* testsuite/gas/arm/float16-bad.l: New test.
* testsuite/gas/arm/float16-bad.s: New test.
* testsuite/gas/arm/float16-be.d: New test.
* testsuite/gas/arm/float16-format-bad.d: New test.
* testsuite/gas/arm/float16-format-bad.l: New test.
* testsuite/gas/arm/float16-format-bad.s: New test.
* testsuite/gas/arm/float16-format-opt-bad.d: New test.
* testsuite/gas/arm/float16-format-opt-bad.l: New test.
* testsuite/gas/arm/float16-le.d: New test.
* testsuite/gas/arm/float16.s: New test.
* testsuite/gas/arm/float16-eabi-alternative-format.d: New test.
* testsuite/gas/arm/float16-eabi-ieee-format.d: New test.
* testsuite/gas/arm/float16-eabi-no-format.d: New test.
* testsuite/gas/arm/float16-eabi.s: New test.
* config/atof-ieee.c (H_PRECISION): Macro for precision of float16
type.
(atof_ieee): Set precision and exponent bits for encoding float16
types.
(gen_to_words): NaN and Infinity encoding for float16.
(ieee_md_atof): Set precision for encoding float16 type.
After some discussion, we've decided to rename the +bitperm feature
flag to +sve2-bitperm, so that it's consistent with the other SVE2
feature flags. The associated internal macros already used
"SVE2_BITPERM", so only the feature flag itself needs to change.
2019-07-19 Richard Sandiford <richard.sandiford@arm.com>
gas/
* doc/c-aarch64.texi: Remame the +bitperm extension to +sve2-bitperm.
* config/tc-aarch64.c (aarch64_features): Likewise.
* testsuite/gas/aarch64/illegal-sve2-aes.d: Update accordingly.
* testsuite/gas/aarch64/illegal-sve2-sha3.d: Likewise.
* testsuite/gas/aarch64/illegal-sve2-sm4.d: Likewise.
* testsuite/gas/aarch64/illegal-sve2.d: Likewise.
* testsuite/gas/aarch64/sve2.d: Likewise.
This little patch adds support to the eBPF port of GAS for a few data
directives. The names for the directives have been chosen to be
coherent with the suffixes used in eBPF instructions: b, h, w and dw
for 8, 16, 32 and 64-bit values respectively.
Documentation and tests included.
Tested in a x86_64 host.
gas/ChangeLog:
2019-07-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-bpf.c (md_pseudo_table): .half, .word and .dword.
* testsuite/gas/bpf/data.s: New file.
* testsuite/gas/bpf/data.d: Likewise.
* testsuite/gas/bpf/data-be.d: Likewise.
* testsuite/gas/bpf/bpf.exp: Run data and data-be.
* doc/c-bpf.texi (BPF Directives): New section.
This patch fixes the eBPF CPU description in order to reflect the
right explicit arguments passed to the ldabs{b,h,w,dw} instructions,
updates the corresponding GAS tests, and updates the BPF section of
the GAS manual.
cpu/ChangeLog:
2019-07-15 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf.cpu (dlabs): New pmacro.
(dlind): Likewise.
opcodes/ChangeLog:
2019-07-15 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf-desc.c: Regenerate.
* bpf-opc.c: Likewise.
* bpf-opc.h: Likewise.
gas/ChangeLog:
2019-07-15 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/gas/bpf/mem.s: ldabs instructions do not take a `src'
register as an argument.
* testsuite/gas/bpf/mem.d: Updated accordingly.
* testsuite/gas/bpf/mem-be.d: Likewise.
* doc/c-bpf.texi (BPF Opcodes): Update to reflect the correct
explicit arguments to ldabs and ldind instructions.
From Kito Cheng <kito.cheng@sifive.com>
gas/ChangeLog
* doc/c-riscv.texi (Instruction Formats): Add r4 type.
* testsuite/gas/riscv/insn.d: Add testcase for r4 type.
* testsuite/gas/riscv/insn.s: Ditto.
* doc/c-riscv.texi (Instruction Formats): Add b and j type.
* testsuite/gas/riscv/insn.d: Add test case for b and j type.
* testsuite/gas/riscv/insn.s: Ditto.
* testsuite/gas/riscv/insn.s: Correct instruction type for load
and store.
* testsuite/gas/riscv/insn.d: Using regular expression to match
address.
* doc/c-riscv.texi (Instruction Formats): Fix encoding table for SB
type and fix typo.
opcode/ChangeLog
* riscv-opc.c (riscv_insn_types): Add r4 type.
* riscv-opc.c (riscv_insn_types): Add b and j type.
* opcodes/riscv-opc.c (riscv_insn_types): Remove incorrect
format for sb type and correct s type.
Recently a patch was submitted for a Xen Project test harness binary to
override the compiler specified @object to @func (see [1]). In a reply I
suggested we shouldn't make ourselves dependent on currently unspecified
behavior of gas here: It accumulates all requests, and then
bfd/elf.c:swap_out_syms(), in an apparently ad hoc manner, prioritizes
certain flags over others.
Make the behavior predictable: Generally the last .type is what counts.
Exceptions are directives which set multiple bits (TLS, IFUNC, and
UNIQUE): Subsequent directives requesting just the more generic bit
(i.e. FUNC following IFUNC) won't clear the more specific one. Warn
about incompatible changes, except from/to STT_NOTYPE.
Also add a new target hook, which hppa wants to use right away afaict.
In the course of adding the warning I ran into two ld testsuite
failures. I can only assume that it was a copy-and-paste mistake that
lead to the same symbol having its type set twice.
[1] https://lists.xenproject.org/archives/html/xen-devel/2019-05/msg01980.html
I had mistakenly given all variants of the new SVE2 instructions
pmull{t,b} a dependency on the feature +sve2-aes.
Only the variant specifying .Q -> .D sizes should have that
restriction.
This patch fixes that mistake and updates the testsuite to have extra
tests (matching the given set of tests per line in aarch64-tbl.h that
the rest of the SVE2 tests follow).
We also add a line in the documentation of the command line to clarify
how to enable `pmull{t,b}` of this larger size. This is needed because
all other instructions gated under the `sve2-aes` architecture extension
are marked in the instruction documentation by an `HaveSVE2AES` check
while pmull{t,b} is gated under the `HaveSVE2PMULL128` check.
Regtested targeting aarch64-linux.
gas/ChangeLog:
2019-07-01 Matthew Malcomson <matthew.malcomson@arm.com>
* testsuite/gas/aarch64/illegal-sve2-aes.d: Update tests.
* testsuite/gas/aarch64/illegal-sve2.l: Update tests.
* doc/c-aarch64.texi: Add special note of pmull{t,b}
instructions under the sve2-aes architecture extension.
* testsuite/gas/aarch64/illegal-sve2.s: Add small size
pmull{t,b} instructions.
* testsuite/gas/aarch64/sve2.d: Add small size pmull{t,b}
disassembly.
* testsuite/gas/aarch64/sve2.s: Add small size pmull{t,b}
instructions.
include/ChangeLog:
2019-07-01 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_insn_class): sve_size_013
renamed to sve_size_13.
opcodes/ChangeLog:
2019-07-01 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm.c (aarch64_encode_variant_using_iclass): Use new
sve_size_13 icode to account for variant behaviour of
pmull{t,b}.
* aarch64-dis-2.c: Regenerate.
* aarch64-dis.c (aarch64_decode_variant_using_iclass): Use new
sve_size_13 icode to account for variant behaviour of
pmull{t,b}.
* aarch64-tbl.h (OP_SVE_VVV_HD_BS): Add new qualifier.
(OP_SVE_VVV_Q_D): Add new qualifier.
(OP_SVE_VVV_QHD_DBS): Remove now unused qualifier.
(struct aarch64_opcode): Split pmull{t,b} into those requiring
AES and those not.
It seems to be not uncommon for people to use AND or OR in this form for
just setting the status flags. TEST, which doesn't write to any
register other than EFLAGS, ought to be preferred. Make the change only
for -O2 and above though, at least for now.
When they're in the 0F opcode space, swapping their source operands may
allow switching from 3-byte to 2-byte VEX prefix encoding. Note that NaN
behavior precludes us doing so for many packed and scalar floating point
insns; such an optimization would need to be done by the compiler
instead in this case, when it knows that NaN-s have undefined behavior
anyway.
While for explicitly specified AVX/AVX2 insns the optimization (for now
at least) gets done only for -O2 and -Os, it is utilized by default in
SSE2AVX mode, as there we're re-writing the programmer's specified insns
anyway.
Rather than introducing a new attribute flag, the change re-uses one
which so far was meaningful only for EVEX-encoded insns.
As long as there's no write mask as well as no broadcast, and as long
as the scaled Disp8 wouldn't result in a shorter EVEX encoding, encode
VPAND{D,Q}, VPANDN{D,Q}, VPOR{D,Q}, and VPXOR{D,Q} acting on only the
lower 16 XMM/YMM registers using their VEX equivalents with -O1.
Also take the opportunity and avoid looping twice over all operands
when dealing with memory-with-displacement ones.
In ELF objects the specified symbol is marked with STO_AARCH64_VARIANT_PCS.
gas/ChangeLog:
* config/tc-aarch64.c (s_variant_pcs): New function.
* doc/c-aarch64.texi: Document .variant_pcs.
* testsuite/gas/aarch64/symbol-variant_pcs-1.d: New test.
* testsuite/gas/aarch64/symbol-variant_pcs-1.s: New test.
* testsuite/gas/aarch64/symbol-variant_pcs-2.d: New test.
* testsuite/gas/aarch64/symbol-variant_pcs-2.s: New test.
This option (also implied by --traditional) causes '$' to introduce
literal hexadecimal constants, rather than the modern convention '0x'.
gas/
* config/tc-s12z.c (s12z_strtol): New function. (md_show_usage): Update.
(md_parse_option): new case OPTION_DOLLAR_HEX. (s12z_init_after_args):
(<global>): Use s12z_strtol instead of strtol.
* doc/c-s12z.texi (S12Z Options): Document new option -mdollar-hex.
* testsuite/gas/s12z/dollar-hex.d: New file.
* testsuite/gas/s12z/dollar-hex.s: New file.
* testsuite/gas/s12z/s12z.exp: Add them.
GNU policy is not to include trademark acknowlegements in
documentation [1]
[1] https://www.gnu.org/prep/standards/html_node/Trademarks.html
Committing as obvious.
gas/
* doc/c-arm.texi (ARM Options): Remove "(r)" and "(tm)"
* doc/c-bfin.texi (Blackfin Syntax): Remove "(r)"
bfd/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* elf32-arm.c (elf32_arm_merge_eabi_attributes): Add case for Tag_MVE_arch.
binutils/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* readelf.c (arm_attr_tag_MVE_arch): New array for Tag_MVE_arch values.
(arm_attr_public_tag arm_attr_public_tags): Add case for Tag_MVE_arch.
elfcpp/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* arm.h (Tag_MVE_arch): Define new enum value.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (mve_ext, mve_fp_ext): New features.
(armv8_1m_main_ext_table): Add new extensions.
(aeabi_set_public_attributes): Translate new features to new build attributes.
(arm_convert_symbolic_attribute): Add Tag_MVE_arch.
* doc/c-arm.texi: Document new extensions and new build attribute.
include/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* elf/arm.h (Tag_MVE_arch): Define new enum value.
* opcode/arm.h (FPU_MVE, FPU_MVE_FP): New MACROs for new features.
Add a new machine dependent option to set a prefix for register names.
gas/
* config/tc-s12z.c (register_prefix): New variable. (md_show_usage,
md_parse_option): parse the new option.
(lex_reg_name): Scan the prefix if one is set.
* doc/c-s12z.texi (S12Z-Opts): Document the new option.
* testsuite/gas/s12z/reg-prefix.d: New file.
* testsuite/gas/s12z/reg-prefix.s: New file.
* testsuite/gas/s12z/s12z.exp: Add them.
Include all feature flag macros.
The "sve2" extension that enables the core sve2 instructions.
This also enables the sve extension, since sve is a requirement of sve2.
Extra optional sve2 features are the bitperm, sm4, aes, and sha3 extensions.
These are all given extra feature flags, "bitperm", "sve2-sm4",
"sve2-aes", and "sve2-sha3" respectively.
The sm4, aes, and sha3 extensions are explicitly marked as sve2
extensions to distinguish them from the corresponding NEON extensions.
Rather than continue extending the current feature flag numbers, I used
some bits that have been skipped.
gas/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c: Add command line architecture feature flags
"sve2", "sve2-sm4", "sve2-aes", "sve2-sha3", "bitperm".
* doc/c-aarch64.texi: Document new architecture feature flags.
include/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_SVE2
AARCH64_FEATURE_SVE2_AES, AARCH64_FEATURE_SVE2_BITPERM,
AARCH64_FEATURE_SVE2_SM4, AARCH64_FEATURE_SVE2_SHA3): New
feature macros.
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-tbl.h
(aarch64_feature_sve2, aarch64_feature_sve2aes,
aarch64_feature_sve2sha3, aarch64_feature_sve2sm4,
aarch64_feature_sve2bitperm): New feature sets.
(SVE2, SVE2_AES, SVE2_SHA3, SVE2_SM4, SVE2_BITPERM): New macros
for feature set addresses.
(SVE2_INSN, SVE2_INSNC, SVE2AES_INSN, SVE2SHA3_INSN,
SVE2SM4_INSN, SVE2SM4_INSNC, SVE2BITPERM_INSN): New macros.
This patch enables the new Transactional Memory Extension added recently
as part of Arm's new architecture technologies.
We introduce a new optional extension "tme" to enable this. The following
instructions are part of the extension:
* tstart <Xt>
* ttest <Xt>
* tcommit
* tcancel #<imm>
The ISA for the above can be found here:
https://developer.arm.com/docs/ddi0602/latest/base-instructions-alphabetic-order
*** gas/ChangeLog ***
2019-05-01 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_operands): Add case for
AARCH64_OPND_TME_UIMM16.
(aarch64_features): Add "tme".
* doc/c-aarch64.texi: Document the same.
* testsuite/gas/aarch64/tme-invalid.d: New test.
* testsuite/gas/aarch64/tme-invalid.l: New test.
* testsuite/gas/aarch64/tme-invalid.s: New test.
* testsuite/gas/aarch64/tme.d: New test.
* testsuite/gas/aarch64/tme.s: New test.
*** include/ChangeLog ***
2019-05-01 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_TME): New.
(enum aarch64_opnd): Add AARCH64_OPND_TME_UIMM16.
*** opcodes/ChangeLog ***
2019-05-01 Sudakshina Das <sudi.das@arm.com>
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
* aarch64-opc.c (operand_general_constraint_met_p): Add case for
AARCH64_OPND_TME_UIMM16.
(aarch64_print_operand): Likewise.
* aarch64-tbl.h (QL_IMM_NIL): New.
(TME): New.
(_TME_INSN): New.
(struct aarch64_opcode): Add tstart, tcommit, ttest and tcancel.
This patch implements the dsp, fp and fp.dp extensions for Armv8.1-M Mainline.
This patch also removes the fp-armv8 check from the half-precision move
instructions 'do_neon_movhf', as checking that the FP16 instructions extension
feature bit is enabled 'ARM_EXT2_FP16_INST' is enough.
gas/ChangeLog:
2019-04-15 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_neon_movhf): Remove fp-armv8 check.
(armv8_1m_main_ext_table): New extension table.
(arm_archs): Use the new extension table.
* doc/c-arm.texi: Add missing arch and document new extensions.
* testsuite/gas/arm/armv8.1-m.main-fp.d: New.
* testsuite/gas/arm/armv8.1-m.main-fp-dp.d: New.
* testsuite/gas/arm/armv8.1-m.main-hp.d: New.
gas/
* config/tc-mips.c (mips_cpu_info_table): Add i6500. Update
default ASEs for i6400.
* doc/c-mips.texi (-march): Document i6500.
* testsuite/gas/mips/elf_mach_i6400.d: New test.
* testsuite/gas/mips/elf_mach_i6500.d: New test.
* testsuite/gas/mips/mips.exp: Run the new tests.
This patch adds a new framework to add architecture sensitive extensions, like
GCC does. This patch also implements all architecture extensions currently
available in GCC.
This framework works as follows. To enable architecture sensitive extensions
for a particular architecture, that architecture must contain an ARM_ARCH_OPT2
entry in the 'arm_archs' table. All fields here are the same as previous, with
the addition of a new extra field at the end to <name> it's extension table.
This <name>, corresponds to a <name>_ext_table of type 'struct arm_ext_table'.
This struct can be filled with three types of entries:
ARM_ADD (string <ext>, arm_feature_set <enable_bits>), which means +<ext> will
enable <enable_bits>
ARM_REMOVE (string <ext>, arm_feature_set <disable_bits>), which means
+no<ext> will disable <disable_bits>
ARM_EXT (string <ext>, arm_feature_set <enable_bits>, arm_feature_set
<disable_bits>), which means +<ext> will enable <enable_bits> and +no<ext>
will disable <disable_bits> (this is to be used instead of adding an
ARM_ADD and ARM_REMOVE for the same <ext>)
This patch does not disable the use of the old extensions, even if some of them
are duplicated in the new tables. This is a "in-between-step" as we may want to
deprecate the old table of extensions in later patches. For now, GAS will first
look for the +<ext> or +no<ext> in the new table and if no entry is found it
will continue searching in the old table, following old behaviour. If only an
ARM_ADD or an ARM_REMOVE is defined for <ext> and +no<ext> or +<ext> resp. is
used then it also continues to search the old table for it.
A couple of caveats:
- This patch does not enable the use of these architecture extensions with the
'.arch_extension' directive. This is future work that I will tend to later.
- This patch does not enable the use of these architecture extensions with the
-mcpu option. This is future work that I will tend to later.
- This patch does not change the current behaviour when combining an
architecture extension and using -mfpu on the command-line. The current
behaviour of GAS is to stage the union of feature bits enabled by both -march
and -mfpu. GCC behaves differently here, so this is something we may want to
revisit on a later date.
Since all AVX512 processors support AVX, we can encode 256-bit/512-bit
VEX/EVEX vector register clearing instructions with 128-bit VEX vector
register clearing instructions at -O1.
* config/tc-i386.c (optimize_encoding): Encode 256-bit/512-bit
VEX/EVEX vector register clearing instructions with 128-bit VEX
vector register clearing instructions at -O1.
* doc/c-i386.texi: Update -O1 and -O2 documentation.
* testsuite/gas/i386/i386.exp: Run optimize-1a and
x86-64-optimize-2a.
* testsuite/gas/i386/optimize-1a.d: New file.
* testsuite/gas/i386/x86-64-optimize-2a.d: Likewise.
Andrew Burgess
Matthew Malcomson
Jan Beulich
Andreas Krebbel
Jozef Lawrynowicz
Simon Marchi
Phil Blundell
Dennis Zhang
Barnaby Wilks
Richard Sandiford
Jose E. Marchesi
Jim Wilson
Nick Clifton
Lili Cui
Jan Beulich
Alan Modra
H.J. Lu
Szabolcs Nagy
John Darrington
Andre Vieira
Sudakshina Das
Matthew Fortune
Xuepeng Guo
Kyrylo Tkachov