* configure.in: Autoupdate to autoconf 2.59.
* aclocal.m4: Rebuild with aclocal 1.4p6.
* configure: Rebuild with autoconf 2.59.
* Makefile.in: Rebuild with automake 1.4p6 (picking up
bfd changes for autoconf 2.59 on the way).
* config.in: Rebuild with autoheader 2.59.
* frv.cpu (cfmovs): Change UNIT attribute to FMALL.
opcodes/
* frv-desc.[ch], frv-opc.[ch]: Regenerated.
gas/testsuite/
* gas/frv/fr550-pack1.[sd]: New test.
* gas/frv/allinsn.exp: Run it.
* mips-opc.c (mips_builtin_opcodes): Move coprocessor 2
move/branch operations to the bottom so that VR5400 multimedia
instructions take precedence in disassembly.
gas/testsuite/
* gas/mips/vr5400.d: Update for a correct disassembly of
"racm.ob".
* mips-opc.c (mips_builtin_opcodes): Remove the MIPS32
ISA-specific "break" encoding.
gas/testsuite/
* gas/mips/mips32.s: Adjust for the unified "break" syntax. Add
another "break" case. Update the comment accordingly.
* gas/mips/set-arch.s: Likewise.
* gas/mips/mips32.d: Adjust for the new output.
* gas/mips/set-arch.d: Likewise.
* i386.h (i386_optab): Remove fildd, fistpd and fisttpd.
opcodes/
* i386-dis.c (x_mode): Comment.
(two_source_ops): File scope.
(float_mem): Correct fisttpll and fistpll.
(float_mem_mode): New table.
(dofloat): Use it.
(OP_E): Correct intel mode PTR output.
(ptr_reg): Use open_char and close_char.
(PNI_Fixup): Handle possible suffix on sidt. Use op1out etc. for
operands. Set two_source_ops.
gas/testsuite/
* gas/i386/prescott.s: Remove fisttpd and fisttpq.
* gas/i386/prescott.d: Update.
* ia64-gen.c (in_iclass): Handle more postinc st
and ld variants.
* ia64-asmtab.c: Rebuilt.
gas/testsuite/
* gas/ia64/dv-raw-err.s: Add some new postinc tests.
* gas/ia64/dv-raw-err.l: Updated.
bfd:
* Makefile.am: Regenerate dependencies.
* Makefile.in: Regenerate.
* archures.c: Add bfd_mach_sh3_nommu .
* bfd-in2.h: Regenerate.
* cpu-sh.c: Add sh3-nommu architecture.
(bfd_to_arch_table): Create new table.
(sh_get_arch_from_bfd_mach): Create new function.
(sh_get_arch_up_from_bfd_mach): Create new function.
(sh_merge_bfd_arch): Create new function.
* elf32-sh.c (sh_ef_bfd_table): Add table.
(sh_elf_check_relocs): Replace switch statement with
use of sh_ef_bfd_table .
(sh_elf_get_flags_from_mach): Add new function.
(sh_find_elf_flags): Likewise.
(sh_elf_copy_private_data): Replace most of non-elf contents
with a call to sh_merge_bfd_arch() .
gas:
* Makefile.am: Regenerate dependecies.
* Makefile.in: Regenerate.
* config/tc-sh.c (valid_arch): Make unsigned.
(preset_target_arch): Likewise.
(md_begin): Use new architecture flags system.
(get_specific): Likewise.
(assemble_ppi): Likewise.
(md_assemble): Likewise. Also fix error check for bad opcodes.
(md_parse_option): Likewise. Also generate -isa values according
to the table in bfd/cpu-sh.c instead of just constants. Also
allow <arch>-up ISA variants.
(sh_elf_final_processing): Replace if-else chain with a call to
sh_find_elf_flags().
* testsuite/gas/sh/arch: New directory.
* testsuite/gas/sh/arch/arch.exp: New test script.
* testsuite/gas/sh/arch/arch_expected.txt: New file.
* testsuite/gas/sh/arch/sh.s: New file.
* testsuite/gas/sh/arch/sh2.s: New file.
* testsuite/gas/sh/arch/sh-dsp.s: New file.
* testsuite/gas/sh/arch/sh2e.s: New file.
* testsuite/gas/sh/arch/sh3-nommu.s: New file.
* testsuite/gas/sh/arch/sh3.s: New file.
* testsuite/gas/sh/arch/sh3-dsp.s: New file.
* testsuite/gas/sh/arch/sh3e.s: New file.
* testsuite/gas/sh/arch/sh4-nommu-nofpu.s: New file.
* testsuite/gas/sh/arch/sh4-nofpu.s: New file.
* testsuite/gas/sh/arch/sh4.s: New file.
* testsuite/gas/sh/arch/sh4a-nofpu.s: New file.
* testsuite/gas/sh/arch/sh4al-dsp.s: New file.
* testsuite/gas/sh/arch/sh4a.s: New file.
include/elf:
* sh.h (EF_SH_HAS_DSP): Remove.
(EF_SH_HAS_FP): Remove.
(EF_SH_MERGE_MACH): Remove.
(EF_SH4_NOFPU): Convert to decimal.
(EF_SH4A_NOFPU): Likewise.
(EF_SH4_NOMMU_NOFPU): Likewise.
(EF_SH3_NOMMU): Add new macro.
(EF_SH_BFD_TABLE): Likewise.
(sh_find_elf_flags): Add prototype.
(sh_elf_get_flags_from_mach): Likewise.
opcodes:
* sh-dis.c (target_arch): Make unsigned.
(print_insn_sh): Replace (most of) switch with a call to
sh_get_arch_from_bfd_mach(). Also use new architecture flags system.
* sh-opc.h: Redefine architecture flags values.
Add sh3-nommu architecture.
Reorganise <arch>_up macros so they make more visual sense.
(SH_MERGE_ARCH_SET): Define new macro.
(SH_VALID_BASE_ARCH_SET): Likewise.
(SH_VALID_MMU_ARCH_SET): Likewise.
(SH_VALID_CO_ARCH_SET): Likewise.
(SH_VALID_ARCH_SET): Likewise.
(SH_MERGE_ARCH_SET_VALID): Likewise.
(SH_ARCH_SET_HAS_FPU): Likewise.
(SH_ARCH_SET_HAS_DSP): Likewise.
(SH_ARCH_UNKNOWN_ARCH): Likewise.
(sh_get_arch_from_bfd_mach): Add prototype.
(sh_get_arch_up_from_bfd_mach): Likewise.
(sh_get_bfd_mach_from_arch_set): Likewise.
(sh_merge_bfd_arc): Likewise.
ld:
* testsuite/ld-sh/arch/arch.exp: New test script.
* testsuite/ld-sh/arch/arch_expected.txt: New file.
* testsuite/ld-sh/arch/sh.s: New file.
* testsuite/ld-sh/arch/sh2.s: New file.
* testsuite/ld-sh/arch/sh-dsp.s: New file.
* testsuite/ld-sh/arch/sh2e.s: New file.
* testsuite/ld-sh/arch/sh3-nommu.s: New file.
* testsuite/ld-sh/arch/sh3.s: New file.
* testsuite/ld-sh/arch/sh3-dsp.s: New file.
* testsuite/ld-sh/arch/sh3e.s: New file.
* testsuite/ld-sh/arch/sh4-nommu-nofpu.s: New file.
* testsuite/ld-sh/arch/sh4-nofpu.s: New file.
* testsuite/ld-sh/arch/sh4.s: New file.
* testsuite/ld-sh/arch/sh4a-nofpu.s: New file.
* testsuite/ld-sh/arch/sh4al-dsp.s: New file.
* testsuite/ld-sh/arch/sh4a.s: New file.
* elf32-sh.c (sh_elf_plt_sym_val): New function.
(elf_backend_plt_sym_val): Define.
opcodes/
* sh-dis.c (print_insn_sh): Print the value in constant pool
as a symbol if it looks like a symbol.
gas/testsuite/
* gas/sh/pcrel2.d: Update.
* gas/sh/tlsd.d: Update.
* gas/sh/tlsnopic.d: Update.
* gas/sh/tlspic.d: Update.
ld/testsuite/
* ld-sh/tlsbin-1.d: Update
* ld-sh/tlspic-1.d: Update.
(fmovicc, fmovfcc, fmovcc): Remove fpsize argument, change opcode to
suffix. Use fmov*x macros, create all 3 fpsize variants in one
macro. Adjust all users.
(M, Mp): Use OP_M.
(None, PADLOCK_SPECIAL, PADLOCK_0): Delete.
(GRPPADLCK): Define.
(dis386): Use NOP_Fixup on "nop".
(dis386_twobyte): Use GRPPADLCK on opcode 0xa7.
(twobyte_has_modrm): Set for 0xa7.
(padlock_table): Delete. Move to..
(grps): ..here, using OP_0f07. Use OP_Ofae on lfence, mfence
and clflush.
(print_insn): Revert PADLOCK_SPECIAL code.
(OP_E): Delete sfence, lfence, mfence checks.
* gas/i386/katmai.d: Revert last change.
(INVLPG_Fixup): New function.
(PNI_Fixup): Remove ATTRIBUTE_UNUSED from sizeflag.
* opcode/i386.h (i386_optab): Remove CpuNo64 from sysenter and
sysexit.
* i386-dis.c (grps): Use clflush by default for 0x0fae/7.
(OP_E): Twiddle clflush to sfence here.
gas/testsuite/
* gas/i386/katmai.d: Adjust for clflush change.
opcodes:
* sh-dis.c (print_insn_sh): Don't disassemble fp instructions in
nofpu mode. Add BFD type bfd_mach_sh4_nommu_nofpu.
* sh-opc.h: Add sh4_nommu_nofpu architecture and adjust instructions
accordingly.
bfd:
* archures.c: Add bfd_mach_sh4_nommu_nofpu.
* cpu-sh.c: Ditto.
* elf32-sh.c: Ditto.
* bfd-in2.h: Regenerate.
include/elf:
* sh.h: Add EF_SH4_NOMMU_NOFPU.
gas:
* config/tc-sh.c (md_parse_option): Add -isa=sh4-nofpu and
-isa=sh4-nommu-nofpu options. Adjust help messages accordingly.
(sh_elf_final_processing): Output BFD type sh4_nofpu if that is
the most general type or the user specifically requested it.
(md_assemble): Add a new error message for when an instruction
is understood, but is not allowed due to an -isa option.
gas:
* tc-sh.c (build_Mytes): Add REG_N_D and REG_N_B01
nibble types to assembler.
opcodes:
* sh-dis.c (print_insn_sh): Add REG_N_D nibble type to
ensure that double registers have even numbers.
Add REG_N_B01 for nn01 (binary 01) nibble to ensure
that reserved instruction 0xfffd does not decode the same
as 0xfdfd (ftrv).
* sh-opc.h: Add REG_N_D nibble type and use it whereever
REG_N refers to a double register.
Add REG_N_B01 nibble type and use it instead of REG_NM
in ftrv.
Adjust the bit patterns in a few comments.
* ppc-opc.c (MO): Make optional.
(RAO, RSO, SHO): New optional forms of RA, RS, SH operands.
(tlbwe): Accept for both PPC403 and BOOKE. Make all operands optional.
gas:
* tc-ppc.c (md_assemble): Rewrite comment about optional operands
to indicate that 'all or none' is also handled. Pluralize a
word in another comment.
gas/testsuite:
* gas/ppc/booke.s: Add two more forms of the mbar instruction
and three forms of the tlbwe instruction.
* gas/ppc/booke.d: Update to match.
* z8kgen.c: Convert to ISO C90.
(opt): Move long opcode for "ldb rdb,imm8" after short one, now
the short one is created when assembling.
* z8k-opc.h: Regenerate with new z8kgen.c.
for loading addresses using CALL relocations.
Don't emit CALL relocations when a base register is used.
* gas/mips/lca-svr4pic.d: New test for the "lca" macro.
* gas/mips/lca-xgot.d: Likewise.
* gas/mips/lca.s: Source for the new tests.
* gas/mips/mips.exp: Run the new tests.
* opcode/mips.h: Define new enum members, M_LCA_AB and M_DLCA_AB.
* mips-opc.c (mips_builtin_opcodes): Handle new macros: "lca" and
"dlca".
On behalf of Doug Evans <dje@sebabeach.org>
* Makefile.am (run-cgen): Pass new args archfile and opcfile
to cgen.sh.
(stamp-ip2k,stamp-m32r,stamp-fr30,stamp-frv,stamp-openrisc,
stamp-iq2000,stamp-xstormy16): Pass paths of .cpu and .opc files
to cgen.sh.
(stamp-frv): Delete hardcoded path spec workaround.
* Makefile.in: Regenerate.
* cgen.sh: New args archfile and opcfile. Pass on to cgen.
* doc/binutils.texi: Document that multiple -M switches are accepted and that
a single -M switch can contain comma separated options.
* arm-dis.c (parse_arm_disassembler_option): Do not expect option string to be
NUL terminated.
(parse_disassembler_options): Allow options to be space or comma separated.
* mips.h (CPU_RM7000): New macro.
(OPCODE_IS_MEMBER): Match CPU_RM7000 against 4650 insns.
bfd/
* archures.c (bfd_mach_mips7000): New.
* bfd-in2.h: Regenerated.
* cpu-mips.c (arch_info_struct): Add an entry for mips:7000.
* elfxx-mips.c (mips_set_isa_flags): Handle bfd_mach_mips7000.
(mips_mach_extensions): Add an entry for it.
opcodes/
* mips-dis.c (mips_arch_choices): Add rm7000 and rm9000 entries.
gas/
* config/tc-mips.c (hilo_interlocks): True for CPU_RM7000.
(mips_cpu_info_table): Add rm7000 and rm9000 entries.
gas/testsuite/
* gas/mips/rm7000.[sd]: New test.
* gas/mips/mips.exp: Run it.
(FXM4): Define.
(insert_fxm): New function, used by both FXM and FXM4.
(extract_fxm): Likewise.
(XFXFXM_MASK): Remove 1 << 20 term.
(powerpc_opcodes): Add Power4 version of "mfcr". Simplify "mtcr" mask.
2003-06-23 H.J. Lu <hongjiu.lu@intel.com>
* gas/config/tc-i386.c (md_assemble): Support Intel Precott New
Instructions.
* gas/config/tc-i386.h (CpuPNI): New.
(CpuUnknownFlags): Add CpuPNI.
gas/testsuite/
2003-06-23 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/i386.exp: Add prescott.
* gas/i386/prescott.d: New file.
* gas/i386/prescott.s: Likewise.
include/opcode/
2003-06-23 H.J. Lu <hongjiu.lu@intel.com>
* i386.h (i386_optab): Support Intel Precott New Instructions.
opcodes/
2003-06-23 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (PNI_Fixup): New. Fix up "mwait" and "monitor" in
Intel Precott New Instructions.
(PREGRP27): New. Added for "addsubpd" and "addsubps".
(PREGRP28): New. Added for "haddpd" and "haddps".
(PREGRP29): New. Added for "hsubpd" and "hsubps".
(PREGRP30): New. Added for "movsldup" and "movddup".
(PREGRP31): New. Added for "movshdup" and "movhpd".
(PREGRP32): New. Added for "lddqu".
(dis386_twobyte): Use PREGRP30 to replace the "movlpX" entry.
Use PREGRP31 to replace the "movhpX" entry. Use PREGRP28 for
entry 0x7c. Use PREGRP29 for entry 0x7d. Use PREGRP27 for
entry 0xd0. Use PREGRP32 for entry 0xf0.
(twobyte_has_modrm): Updated.
(twobyte_uses_SSE_prefix): Likewise.
(grps): Use PNI_Fixup in the "sidtQ" entry.
(prefix_user_table): Add PREGRP27, PREGRP28, PREGRP29, PREGRP30,
PREGRP31 and PREGRP32.
(float_mem): Use "fisttp{l||l|}" in entry 1 in opcode 0xdb.
Use "fisttpll" in entry 1 in opcode 0xdd.
Use "fisttp" in entry 1 in opcode 0xdf.
(print_insn_z8k): Correctly check return value from
z8k_lookup_instr call.
(unparse_instr): Handle CLASS_IRO case.
* z8kgen.c: Fix function definitions. Fix formatting.
(opt): Add brk opcode alias for non-simulator breakpoint. Add
missing and fix existing in/out and sin/sout opcode definitions.
(args): "@ri", "@ro" - add CLASS_IRO register usage for in/out
opcodes.
(internal): Check p->flags for non-zero before dereferencing it.
(gas): Add CLASS_IRO line. Insert new OPC_xxx lines for the added
opcodes and renumber the remaining lines repectively.
(main): Remove "-d" command line switch.
* z8k-opc.h: Regenerate with new z8kgen.c.
and Bernd Schmidt <bernds@redhat.com>
and Alexandre Oliva <aoliva@redhat.com>
* disassemble.c (disassembler): Add support for h8300sx.
* h8300-dis.c: Ditto.
Nick Clifton