Implement the AArch64 RVBAR register, which indicates the reset
address. Since the reset address is implementation defined and
usually configurable by setting config signals in hardware, we
also provide a QOM property so it can be set at board level if
necessary.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Implement the AArch64 address translation operations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Implement the auxiliary fault status registers AFSR0_EL1 and
AFSR1_EL1. These are present on v7 and later, and have IMPDEF
behaviour; we choose to RAZ/WI for all cores.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Many of the reginfo definitions in cp_reginfo[] use CP_ANY wildcards.
This is for a combination of reasons:
* early ARM implementations really did underdecode
* earlier versions of QEMU underdecoded and we can't tighten
this up because we don't know if guests really require this or not
* implementation convenience
For ARMv8 the architecture has tightened things up and system and
coprocessor registers are always specifically decoded. We take
advantage of this opportunity for a clean break by restricting
our CP_ANY wildcarded reginfo to pre-v8 CPUs, and providing
specifically decoded versions where necessary for v8 CPUs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
In ARMv8 the 32 bit coprocessor ID register space is tidied up to
remove the wildcarded aliases of the MIDR and the RAZ behaviour
for the unassigned space where crm = 3..7. Make sure we don't
expose thes wildcards for v8 cores. This means we need to have
a specific implementation for REVIDR, an IMPDEF register which
may be the same as the MIDR (and which we always implement as such).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
The AArch64 usermode 'any' CPU type was accidentally specified
with the ARM_FEATURE_THUMB2EE bit set. This is incorrect since
ARMv8 removes Thumb2EE completely. Since we never implemented
Thumb2EE anyway having the feature bit set was fairly harmless
for user-mode, but the correct thing is to not set it at all.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Implement the ISR_EL1 register. This is actually present in
ARMv7 as well but was previously unimplemented. It is a
read-only register that indicates whether interrupts are
currently pending.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Implement the AArch64 view of the ACTLR (auxiliary control
register). Note that QEMU internally tends to call this
AUXCR for historical reasons.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Implement AArch64 view of the CONTEXTIDR register.
We tighten up the condition when we flush the TLB on a CONTEXTIDR
write to avoid needlessly flushing the TLB every time on a 64
bit system (and also on a 32 bit system using LPAE, as a bonus).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
All the AArch32 ID registers are visible from AArch64
(in addition to the AArch64-specific ID_AA64* registers).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
For ARMv8 there are two changes to the MVFR media feature registers:
* there is a new MVFR2 which is accessible from 32 bit code
* 64 bit code accesses these via the usual sysreg instructions
rather than with a floating-point specific instruction
Implement this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Implement exception handling for AArch64 EL1. Exceptions from AArch64 or
AArch32 EL0 are supported.
Signed-off-by: Rob Herring <rob.herring@linaro.org>
[PMM: fixed minor style nits; updated to match changes in
previous patches; added some of the simpler cases of
illegal-exception-return support]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Move arm_log_exception() into internals.h so we can use it from
helper-a64.c for the AArch64 exception entry code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Implement the AArch64 SPSR_EL1. For compatibility with how KVM
handles SPSRs and with the architectural mapping between AArch32
and AArch64, we put this in the banked_spsr[] array in the slot
that is used for SVC in AArch32. This means we need to extend the
array from uint32_t to uint64_t, which requires some reworking
of the 32 bit KVM save/restore code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Implement handling for the AArch64 SP_EL0 system register.
This holds the EL0 stack pointer, and is only accessible when
it's not being used as the stack pointer, ie when we're in EL1
and EL1 is using its own stack pointer. We also provide a
definition of the SP_EL1 register; this isn't guest visible
as a system register for an implementation like QEMU which
doesn't provide EL2 or EL3; however it is useful for ensuring
the underlying state is migrated.
We need to update the state fields in the CPU state whenever
we switch stack pointers; this happens when we take an exception
and also when SPSEL is used to change the bit in PSTATE which
indicates which stack pointer EL1 should use.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Add the AArch64 ELR_EL1 register.
Note that this does not live in env->cp15: for KVM migration
compatibility we need to migrate it separately rather than
as part of the system registers, because the KVM-to-userspace
interface puts it in the struct kvm_regs rather than making
them visible via the ONE_REG ioctls.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Implement AArch64 views of ESR_EL1 and FAR_EL1, and make the 32 bit
DFSR, DFAR, IFAR share state with them as architecturally specified.
The IFSR doesn't share state with any AArch64 register visible at EL1,
so just rename the state field without widening it to 64 bits.
Signed-off-by: Rob Herring <rob.herring@linaro.org>
[PMM: Minor tweaks; fix some bugs involving inconsistencies between
use of offsetof() or offsetoflow32() and struct field width]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
The ARM946 model currently uses the c5_data and c5_insn fields in the CPU
state struct to store the contents of its access permission registers.
This is confusing and a good source of bugs because for all the MMU-based
CPUs those fields are fault status and fault address registers, which
behave completely differently; they just happen to use the same cpreg
encoding. Split them out to use their own fields instead.
These registers are only present in PMSAv5 MPU systems (of which the
ARM946 is our only current example); PMSAv6 and PMSAv7 (which we have
no implementations of) handle access permissions differently. We name
the new state fields accordingly.
Note that this change fixes a bug where a data abort or prefetch abort
on the ARM946 would accidentally corrupt the access permission registers
because the interrupt handling code assumed the c5_data and c5_insn
fields were always fault status registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Implement the DC ZVA instruction, which clears a block of memory.
The fast path obtains a pointer to the underlying RAM via the TCG TLB
data structure so we can do a direct memset(), with fallback to a
simple byte-store loop in the slow path.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Suppress the ID_AA64DFR0_EL1 PMUVer field, even if the CPU specific
value claims that it exists. QEMU doesn't currently implement it,
and not advertising it prevents the guest from trying to use it
and getting UNDEFs on unimplemented registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
---
This is arguably a hack, but otherwise Linux tries to prod
half a dozen PMU sysregs.
Add support for v8 page table walks. This supports stage 1 translations
for 4KB, 16KB and 64KB page sizes starting with 0 or 1 level.
Signed-off-by: Rob Herring <rob.herring@linaro.org>
[PMM: fix style nits, fold in 16/64K page support patch, use
arm_el_is_aa64() to decide whether to do 64 bit page table walk]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
The current A32/T32 decoder bases its "is VFP/Neon enabled?" check
on the FPSCR.EN bit. This is correct if EL1 is AArch32, but for
an AArch64 EL1 the logic is different: it must act as if FPSCR.EN
is always set. Instead, trapping must happen according to CPACR
bits for cp10/cp11; these cover all of FP/Neon, including the
FPSCR/FPSID/MVFR register accesses which FPSCR.EN does not affect.
Add support for CPACR checks (which are also required for ARMv7,
but were unimplemented because Linux happens not to use them)
and make sure they generate exceptions with the correct syndrome.
We actually return incorrect syndrome information for cases
where FP is disabled but the specific instruction bit pattern
is unallocated: strictly these should be the Uncategorized
exception, not a "SIMD disabled" exception. This should be
mostly harmless, and the structure of the A32/T32 VFP/Neon
decoder makes it painful to put the 'FP disabled?' checks in
the right places.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Because unallocated encodings generate different exception syndrome
information from traps due to FP being disabled, we can't do a single
"is fp access disabled" check at a high level in the decode tree.
To help in catching bugs where the access check was forgotten in some
code path, we set this flag when the access check is done, and assert
that it is set at the point where we actually touch the FP regs.
This requires us to pass the DisasContext to the vec_reg_offset
and fp_reg_offset functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
For the A64 instruction set, the only FP/Neon disable trap
is the CPACR FPEN bits, which may indicate "enabled", "disabled"
or "disabled for EL0". Add a bit to the AArch64 tb flags indicating
whether FP/Neon access is currently enabled and make the decoder
emit code to raise exceptions on use of FP/Neon insns if it is not.
We use a new flag in DisasContext rather than borrowing the
existing vfp_enabled flag because the A32/T32 decoder is going
to need both.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
---
I'm aware this is a rather hard to review patch; sorry.
I have done an exhaustive check that we have fp access checks
in all code paths with the aid of the assertions added in the
next patch plus the code-coverage hack patch I posted to the
list earlier.
This patch is correct as of
09e037354 target-arm: A64: Add saturating accumulate ops (USQADD/SUQADD)
which was the last of the Neon insns to be added, so assuming
no refactoring of the code it should be fine.
Set up the required syndrome information when we detect an MMU fault.
Signed-off-by: Rob Herring <rob.herring@linaro.org>
[PMM: split out from exception handling patch, tweaked to bring
in line with how we create other kinds of syndrome information]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Add new helpers exception_with_syndrome (for generating an exception
with syndrome information) and exception_uncategorized (for generating
an exception with "Unknown or Uncategorized Reason", which have a syndrome
register value of zero), and use them to generate the correct syndrome
information for exceptions which are raised directly from generated code.
This patch includes moving the A32/T32 gen_exception_insn functions
further up in the source file; they will be needed for "VFP/Neon disabled"
exception generation later.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
For exceptions taken to AArch64, if a coprocessor/system register
access fails due to a trap or enable bit then the syndrome information
must include details of the failing instruction (crn/crm/opc1/opc2
fields, etc). Make the decoder construct the syndrome information
at translate time so it can be passed at runtime to the access-check
helper function and used as required.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
For AArch32 exceptions, the only information provided about
the cause of an exception is the individual exception type (data
abort, undef, etc), which we store in cs->exception_index. For
AArch64, the CPU provides much more detail about the cause of
the exception, which can be found in the syndrome register.
Create a set of fields in CPUARMState which must be filled in
whenever an exception is raised, so that exception entry can
correctly fill in the syndrome register for the guest.
This includes the information which in AArch32 appears in
the DFAR and IFAR (fault address registers) and the DFSR
and IFSR (fault status registers) for data aborts and
prefetch aborts, since if we end up taking the MMU fault
to AArch64 rather than AArch32 this will need to end up
in different system registers.
This patch does a refactoring which moves the setting of the
AArch32 DFAR/DFSR/IFAR/IFSR from the point where the exception
is raised to the point where it is taken. (This is no change
for cores with an MMU, retains the existing clearly incorrect
behaviour for ARM946 of trashing the MP access permissions
registers which share the c5_data and c5_insn state fields,
and has no effect for v7M because we don't implement its
MPU fault status or address registers.)
As a side effect of the cleanup we fix a bug in the AArch64
linux-user mode code where we were passing a 64 bit fault
address through the 32 bit c6_data/c6_insn fields: it now
goes via the always-64-bit exception.vaddress.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Implement the DAIF system register which is a view of the
DAIF bits in PSTATE. To avoid needing a readfn, we widen
the daif field in CPUARMState to uint64_t.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Currently cpu.h defines a mixture of functions and types needed by
the rest of QEMU and those needed only by files within target-arm/.
Split the latter out into a new header so they aren't needlessly
exposed further than required.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
This fixes a warning from the static code analysis (smatch).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The order of operands for the accumulate step in disas_simd_3same_int()
was reversed. This only affected the MLS instruction, since all the
other accumulating instructions in this category perform an addition
rather than a subtraction.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the saturating accumulate operations USQADD and SUQADD
to the A64 instruction set. This completes coverage of A64 Neon.
These operations (which are unsigned + signed -> signed and
signed + unsigned -> unsigned) don't exist in the A32/T32
instruction set, so require a complete new set of helper functions.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This mostly re-uses the existing NEON helpers with an additional two for
the 64 bit case. I also took the opportunity to add TCG_CALL_NO_RWG
options to the helpers as they don't modify globals (saturation flags
are in the CPU Environment).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This adds support for [UF]RSQRTE instructions. It utilises the existing
NEON helpers with some changes. The changes include an explicit passing
of fpstatus (so the correct one is used between arm32 and aarch64),
denormilzation, more correct error handling and also proper scaling of
the fraction going into the estimate.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-25-git-send-email-peter.maydell@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the FCVTXN operation, which does a narrowing fp precision
conversion using the "round to odd" (von Neumann) mode. This can
conveniently be implemented as "do operation using round to zero;
then set the LSB of the mantissa to 1 if the Inexact flag was set".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-24-git-send-email-peter.maydell@linaro.org
This completes the set of integer narrowing saturating ops including:
SQXTN, SQXTN2
SQXTUN, SQXTUN2
UQXTN, UQXTN2
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-23-git-send-email-peter.maydell@linaro.org
Move the handle_2misc_narrow() function up the file so that it can
be called from disas_simd_scalar_two_reg_misc().
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-22-git-send-email-peter.maydell@linaro.org
Implement URECPE and FRECPE instructions in both scalar and vector forms.
The actual reciprocal estimate function is shared with the A32/T32 Neon
code. However in A64 we aren't using the Neon "standard FPSCR value"
so extra checks are necessary to handle non-squashed denormal inputs
which can never happen for A32/T32. Calling conventions for the helpers
are thus modified to pass the fpst directly; we mark the helpers as
TCG_CALL_NO_RWG since we're changing the declarations anyway.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-21-git-send-email-peter.maydell@linaro.org
Implement FCVTZS and FCVTZU in the shift-imm and scalar-shift-imm
categories; this completes the implementation of those two groups.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-19-git-send-email-peter.maydell@linaro.org
Implement the saturating left shift instructions SQSHL, SQSHLU
and UQSHL for the scalar-shift-imm and shift-imm categories.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-18-git-send-email-peter.maydell@linaro.org
Implement the FRINT* round-to-integral operations from
the 2-reg-misc category.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-16-git-send-email-peter.maydell@linaro.org
These are fairly simple exponent only estimation functions using helpers.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-14-git-send-email-peter.maydell@linaro.org
Add the remaining unsupported opcodes to the decode switches
for the shift-imm and scalar shift-imm categories so we can
see what is still to be implemented.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-13-git-send-email-peter.maydell@linaro.org
Implement FCVTL, the only instruction in the 2-reg-misc group
which widens from size to 2*size elements.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-12-git-send-email-peter.maydell@linaro.org
Implement FCVTN (narrowing fp-to-fp conversions) from the SIMD
2-reg-misc category.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-11-git-send-email-peter.maydell@linaro.org
Implement the floating-point-to-integer conversion instructions
FCVT[NMAPZ][SU] in the 2-reg-misc and scalar-2-reg-misc
categories.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-10-git-send-email-peter.maydell@linaro.org
Implement the SHLL and SHLL2 instructions from the 2-reg-misc
category.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-9-git-send-email-peter.maydell@linaro.org
Implement the SADDLP, UADDLP, SADALP and UADALP instructions
in the SIMD 2-reg misc category.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-8-git-send-email-peter.maydell@linaro.org
This implements the remaining [US][Q][R]SHR[U][N][2] opcodes, which are
saturating and narrowing shift right operations. These are used in
things like libav. Note signed shifts can have an "unsigned" saturating
narrow operation which will floor negative values.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1394822294-14837-7-git-send-email-peter.maydell@linaro.org
[PMM: Added the scalar encodings, style tweaks]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the CLS, CLZ operations in the 2-reg-misc category.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-6-git-send-email-peter.maydell@linaro.org
Implement FSQRT in the two-reg-misc category.
GCC uses this instruction form.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-5-git-send-email-peter.maydell@linaro.org
This adds the remaining [US]CVTF operations to the SIMD
shift-immediate, scalar-shift-immediate, two-reg-misc and
scalar-two-reg-misc groups of opcodes.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1394822294-14837-4-git-send-email-peter.maydell@linaro.org
[PMM: added scalar 2-misc and scalar-shift-imm encodings]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
rn == 31 always means SP (not XZR) whether an add_sub_ext
instruction is setting the flags or not; only rd has behaviour
dependent on whether we are setting flags.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-3-git-send-email-peter.maydell@linaro.org
Implement the PMULL instruction; this is the last unimplemented insn
in the three-reg-diff group.
Note that PMULL with size 3 is considered part of the AES part
of the crypto extensions (see the ID_AA64ISAR0_EL1 register definition
in the v8 ARM ARM), so it isn't necessary to burn an extra feature
bit on it, even though we're using more feature bits than a single
"crypto extension present/not present" toggle.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-2-git-send-email-peter.maydell@linaro.org
Now that the PMCR writefn makes timer accesses, its reginfo needs
the ARM_CP_IO flag, so that icount mode works correctly. (Fixes
the bug accidentally introduced in commit 7c2cb42b).
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1394908291-16546-1-git-send-email-peter.maydell@linaro.org
Codespell found and fixed these new typos:
* doesnt -> doesn't
* funtion -> function
* perfomance -> performance
* remaing -> remaining
A coding style issue (line too long) was fixed manually.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Most targets were using offsetof(CPUFooState, breakpoints) to determine
how much of CPUFooState to clear on reset. Use the next field after
CPU_COMMON instead, if any, or sizeof(CPUFooState) otherwise.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Note that while such functions may exist both for *-user and softmmu,
only *-user uses the CPUState hook, while softmmu reuses the prototype
for calling it directly.
Signed-off-by: Andreas Färber <afaerber@suse.de>
All targets using it gain the ability to set -cpu name,key=value,...
options via the default TYPE_CPU CPUClass::parse_features() implementation.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Default to false.
Tidy variable naming and inline cast uses while at it.
Tested-by: Jia Liu <proljc@gmail.com> (or32)
Signed-off-by: Andreas Färber <afaerber@suse.de>
Commits ab1da85791,
fdfba1a298,
2c17449b30 added usages of ENV_GET_CPU()
macro to target-specific code.
Use arm_env_get_cpu() instead and enforce separating variable
declarations.
Cc: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Implement WFE to yield our timeslice to the next CPU.
This avoids slowdowns in multicore configurations caused
by one core busy-waiting on a spinlock which can't possibly
be unlocked until the other core has an opportunity to run.
This speeds up my test case A15 dual-core boot by a factor
of three (though it is still four or five times slower than
a single-core boot).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1393339545-22111-1-git-send-email-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <rth@twiddle.net>
Tested-by: Rob Herring <rob.herring@linaro.org>
Fixes a build error when these are different, e.g. x32.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394043257-4800-1-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 4cc35614a moved the exception mask bits out of env->uncached_cpsr
and into env->daif. However the env->daif contents are AArch64 style
mask bits, which include not just the AArch32 AIF bits but also the
new D bit (masks debug exceptions). This means that when reconstructing
the AArch32 CPSR value we must not allow the D bit in env->daif to get
into the CPSR, because the corresponding bit in the CPSR is E, the
endianness bit.
This bug didn't affect execution under TCG because we don't implement
endianness-swapping and so simply ignored the E bit; however it meant
that kernel booting under KVM failed, because KVM does honour the E bit.
Reported-by: Alexey Ignatov <lexszero@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for AArch32 CRC32 and CRC32C instructions added in ARMv8
and add a CPU feature flag to enable these instructions.
The CRC32-C implementation used is the built-in qemu implementation
and The CRC-32 implementation is from zlib. This requires adding zlib
to LIBS to ensure it is linked for the linux-user binary.
Signed-off-by: Will Newton <will.newton@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1393411566-24104-3-git-send-email-will.newton@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are various situations where we need to behave differently
depending on whether a given exception level is in AArch64 or
AArch32 state. The state of the current exception level is stored
in env->aarch64, but there's no equivalent guest-visible architected
state bits for the status of the exception levels "above" the
current one which may still affect execution. At the moment we
only support EL1 (ie no EL2 or EL3) and insist that AArch64
capable CPUs run with EL1 in AArch64 state, but these may change
in the future, so abstract out the "what state is this?" check
into a utility function which can be enhanced later if necessary.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Implement the AArch64 view of the CPACR. The AArch64
CPACR is defined to have a lot of RES0 bits, but since
the architecture defines that RES0 bits may be implemented
as reads-as-written and we know that a v8 CPU will have
no registered coprocessors for cp0..cp13 we can safely
implement the whole register this way.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Implement the MSR (immediate) instructions, which can update the
PSTATE SP and DAIF fields.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
To avoid complication in code that otherwise would not need to
care about whether EL1 is AArch32 or AArch64, we should store
the interrupt mask bits (CPSR.AIF in AArch32 and PSTATE.DAIF
in AArch64) in one place consistently regardless of EL1's mode.
Since AArch64 has an extra enable bit (D for debug exceptions)
which isn't visible in AArch32, this means we need to keep
the enables in env->pstate. (This is also consistent with the
general approach we're taking that we handle 32 bit CPUs as
being like AArch64/ARMv8 CPUs but which only run in 32 bit mode.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Implement the WFI instruction for A64; this just involves wiring
up the instruction, and adding a gen_a64_set_pc_im() which was
accidentally omitted from the A64 decoder top loop.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Emit the correct MMU index information for loads and stores from
A64 code, rather than hardwiring it to "always kernel mode",
by storing the exception level in the TB flags, and make
cpu_mmu_index() return the right answer when the CPU is in
AArch64 mode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Define a dummy version of the AArch64 OSLAR_EL1 system register
which just ignores writes. Linux will always write to this (it
is the OS lock used for debugging), but we don't support debug.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
In AArch64 the breakpoint and watchpoint registers are mandatory, so the
kernel always accesses them on bootup. Implement dummy versions, which
read as written but have no actual effect.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Implement the AArch64-specific ID and feature registers. Although
many of these are currently not used by the architecture (and so
always zero for all implementations), we define the full set of
fields in the ARMCPU struct for symmetry.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Implement the AArch64 MPIDR system register.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Implement the AArch64 TTBR* registers. For v7 these were already 64 bits
to handle LPAE, but implemented as two separate uint32_t fields.
Combine them into a single uint64_t which can be used for all purposes.
Since this requires touching every use, take the opportunity to rename
the field to the architectural name.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Implement the A64 view of the VBAR system register.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Implement the AArch64 TCR_EL1, which is the 64 bit view of
the AArch32 TTBCR. (The uses of the bits in the register are
completely different, but in any given situation the CPU will
always interpret them one way or the other. In fact for QEMU EL1
is always 64 bit, but we share the state field because this
is the correct mapping to permit a future implementation of EL2.)
We also make the AArch64 view the 'master' as far as migration
and reset is concerned.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Implement the AArch64 view of the system control register SCTLR_EL1.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Implement the AArch64 memory attribute registers. Since QEMU doesn't
model caches it does not need to care about memory attributes at all,
and we can simply make these read-as-written.
We did not previously implement the AArch32 versions of the MAIR
registers, which went unnoticed because of the overbroad TLB_LOCKDOWN
reginfo definition; provide them now to keep the 64<->32 register
relationship clear.
We already provided AMAIR registers for 32 bit as simple RAZ/WI;
extend that to provide a 64 bit RAZ/WI AMAIR_EL1.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
We don't support letting the guest do debug, but Linux prods the
monitor debug system control register anyway, so implement a dummy
RAZ/WI version.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Implement the AArch64 TLB invalidate operations. This is
the full set of TLBI ops defined for a CPU which doesn't
implement EL2 or EL3.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement all the AArch64 cache invalidate and clean ops
(which are all NOPs since QEMU doesn't emulate the cache).
The only remaining unimplemented cache op is DC ZVA.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Implement the AArch64 view of the MIDR system register
(for AArch64 it is a simple constant, unlike the complicated
mess that TI925 imposes on the 32-bit view).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Make the cache ID system registers (CLIDR, CSSELR, CCSIDR, CTR)
visible to AArch64. These are mostly simple 64-bit extensions of the
existing 32 bit system registers and so can share reginfo definitions.
CTR needs to have a split definition, but we can clean up the
temporary user-mode implementation in favour of using the CPU-specified
reset value, and implement the system-mode-required semantics of
restricting its EL0 accessibility if SCTLR.UCT is not set.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
The raw read and write functions were using the ARM_CP_64BIT flag in
ri->type to determine whether to treat the register's state field as
uint32_t or uint64_t; however AArch64 register info structs don't use
that flag. Abstract out the "how big is the field?" test into a
function and fix it to work for AArch64 registers. For this to work
we must ensure that the reginfo structs put into the hashtable have
the correct state field for their use, not the placeholder STATE_BOTH.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Support creating the ARM vgic device through the device control API and
setting the base address for the distributor and cpu interfaces in KVM
VMs using this API.
Because the older KVM_CREATE_IRQCHIP interface needs the irq chip to be
created prior to creating the VCPUs, we first test if we can use the
device control API in kvm_arch_irqchip_create (using the test flag from
the device control API). If we cannot, it means we have to fall back to
KVM_CREATE_IRQCHIP and use the older ioctl at this point in time. If
however, we can use the device control API, we don't do anything and
wait until the arm_gic_kvm driver initializes and let that use the
device control API.
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1392687720-26806-5-git-send-email-christoffer.dall@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In ARMv5 level 2 page table descriptors, each 4K or 64K page is split into
four subpages, each of which can have different access permission settings,
which are specified by four two-bit fields in the l2 descriptor. A
long-standing cut-and-paste error meant we were using the wrong bits in
the virtual address to select the access-permission field for 4K pages.
The error has presumably not been noticed before because most guests don't
make use of the ability to set the access permissions differently for
each 1K subpage: if the guest gives the whole page the same access
permissions it doesn't matter which of the 4 AP fields we select.
(The whole issue is irrelevant for ARMv7 CPUs anyway because subpages
aren't supported there.)
Reported-by: Vivek Rai <Vivek.Rai@emulex.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1392667690-8731-1-git-send-email-peter.maydell@linaro.org
Correct some obviously nonsensical bit manipulation spotted by Coverity
when constructing the short-form PAR value for ATS operations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1392659525-8335-1-git-send-email-peter.maydell@linaro.org
Implement the unprivileged load and store instructions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement the narrowing three-reg-diff operations: ADDHN,
RADDHN, SUBHN and RSUBHN.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement the wide three-reg-different operations:
SADDW, UADDW, SSUBW and USUBW.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add the remainder of the 64x64->128 operations in the three-reg-diff
category except for PMULL, PMULL2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The opcode switch in disas_simd_three_reg_diff() is missing the
customary comments indicating which cases correspond to which
instructions. Add them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
System mode store-exclusive use a different code path to usermode ones;
implement this missing code, in a similar way to the 32 bit version.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The write_raw_cp_reg's value argument should be a uint64_t, since
that's what all its callers hand it and what all the functions it
calls take. A (harmless) typo meant we were accidentally declaring
it as int64_t.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
The read_raw_cp_reg and write_raw_cp_reg functions can now never
fail (in fact they should never have failed previously unless
there was a bug in a reginfo that meant no raw accessor was
provided for a might-trap register). This allows us to clean up
their prototypes so the write function returns void and the
read function returns the value read, which in turn lets us
simplify the callers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Now that cpreg read and write functions can't fail and throw an
exception, we can remove the code from the translator that synchronises
the guest PC in case an exception is thrown.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All cpreg read and write functions now return 0, so we can clean up
their prototypes:
* write functions return void
* read functions return the value rather than taking a pointer
to write the value to
This is a fairly mechanical change which makes only the bare
minimum set of changes to the callers of read and write functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Convert the remaining miscellaneous cases of reginfo read/write
functions returning EXCP_UDEF to use an accessfn instead:
TEEHBR, and the ATS address-translation operations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert the reginfo structs for the generic timer registers
to use access functions rather than returning EXCP_UDEF from
their read handlers. In some cases this allows us to remove
a read handler completely.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Convert the performance monitor reginfo definitions to use
an accessfn rather than returning EXCP_UDEF from read and
write functions. This also allows us to fix a couple of XXX
cases where we weren't imposing the access restrictions on
RAZ/WI or constant registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Several of the system registers handled via the ARMCPRegInfo
mechanism have access trap control bits controlling whether the
registers are accessible to lower privilege levels. Replace
the existing mechanism (allowing the read and write functions
to return EXCP_UDEF if access is denied) with a dedicated
"check access rights" function pointer in the ARMCPRegInfo.
This will allow us to simplify some of the register definitions,
which no longer need read/write functions purely to handle
the access checks.
We take the opportunity to define the return value from the
access checking function in a way that allows us to set the
correct exception syndrome information for exceptions taken
to AArch64 (which may need to distinguish access failures due
to a configurable trap or enable from other kinds of access
failure).
This commit defines the new mechanism but does not move any
of the registers across to use it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
The ARM946 has 8 PRBS (protection region base and size) registers.
Currently we implement these with a CP_ANY reginfo; however this
underdecodes (since there are 16 possible values of CRm but only
8 registers) and we catch the invalid values in the read and
write functions. However this causes issues with migration since
we only migrate the first of a wildcard register set, so we only
migrate c6_region[0]. It also makes it awkward to pull reginfo
access checks out into their own function.
Avoid all these problems by just defining separate reginfo structs
for each of the 8 registers; this also lets us avoid having any
read or write functions and will result in more efficient direct
field accesses from generated code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Log guest attempts to access unimplemented system registers via
the LOG_UNIMP reporting mechanism (for both the 32 bit and 64 bit
instruction sets). This is particularly useful for debugging
problems where the guest is trying to use a system register that
QEMU doesn't implement.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Remove the 'struct sr' from ARMCPUState -- it isn't actually used and is
a hangover from the original separate system register implementation used
by the SuSE linux-user-mode-only AArch64 target.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
The SCTLR bits S and R (8 and 9) only exist in ARMv6 and earlier.
In ARMv7 these bits RAZ, and in ARMv8 they are reassigned. Guard
the use of them in check_ap() so that we don't get incorrect results
for ARMv8 CPUs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
The SCTLR is full of bits for enabling or disabling various things, and so
there are many places in the code which check if certain bits are set.
Define some named constants for the SCTLR bits so these checks are easier
to read.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Extend the set of CPUs for which we provide a QEMU_KVM_ARM_TARGET_*
constant to include all the ones currently supported by the kernel
headers we are using.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the remaining instructions in the SIMD 3-reg-same
and scalar-3-reg-same groups: FMULX, FRECPS, FRSQRTS, FACGE,
FACGT, FMLA and FMLS.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add support for the floating-point pairwise operations
FADDP, FMAXP, FMAXNMP, FMINP and FMINNMP. To do this we use the
code which was previously handling only integer pairwise operations,
and push the integer-specific decode and handling of unallocated
cases up one level in the call tree, so we can also call it from
the floating-point section of the decoder.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This adds all forms of the SIMD floating point and set instructions:
FCM(GT|GE|EQ|LE|LT)
Most of the heavy lifting is done by either the existing neon helpers or
some new helpers for the 64bit double cases. Most of the code paths are
common although the 2misc versions are a little special as they compare
against zero.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
[PMM: fixed some minor bugs, added the 2-misc-scalar encoding]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement the scalar three different instruction group:
it only has three instructions in it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement the SIMD scalar indexed instructions. The encoding
here is nearly identical to the vector indexed grouping, so
we combine the two.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement the 'long' operations in the vector x indexed
element category.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement all the SIMD vector x indexed element instructions
in the subcategory which are not 'long' ops.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Use libvixl to implement disassembly output in debug
logs for A64, for use with both AArch64 hosts and targets.
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
[PMM:
* added support for target disassembly
* switched to custom QEMUDisassembler so the output format
matches what QEMU expects
* make sure we correctly fall back to "just print hex"
if we didn't build the AArch64 disassembler because of
lack of a C++ compiler
* rename from 'aarch64' to 'arm-a64' because this is a
disassembler for the A64 instruction set
* merge aarch64.c and aarch64-cxx.cc into one C++ file
* simplify the aarch64.c<->aarch64-cxx.cc interface]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for the AArch32 floating-point half-precision to double-
precision conversion VCVTB and VCVTT instructions.
Signed-off-by: Will Newton <will.newton@linaro.org>
[PMM: fixed a minor missing-braces style issue]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the SIMD FNEG and FABS instructions in the SIMD 2-reg-misc group.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add the byte-reverse operations REV64, REV32 and REV16 from the
two-reg-misc group.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add the narrowing integer instructions in the 2-reg-misc class.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement the 2-reg-misc CNT, NOT and RBIT instructions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement the simple 2-register-misc operations we can share
with the scalar-two-register-misc code. (SUQADD, USQADD, SQABS,
SQNEG also fall into this category, but aren't implemented in
the scalar-2-register case yet either.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add a skeleton decode for the SIMD 2-reg misc group.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement the simple 64 bit integer operations from the SIMD
scalar 2-register misc group (C3.6.12): the comparisons against
zero, plus ABS and NEG.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement the instructions in the scalar pairwise group (C3.6.8).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement the pairwise integer operations in the 3-reg-same SIMD group:
ADDP, SMAXP, SMINP, UMAXP and UMINP.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement the SIMD 3-reg-same instructions where the size == 3 case
is reserved: SHADD, UHADD, SRHADD, URHADD, SHSUB, UHSUB, SMAX,
UMAX, SMIN, UMIN, SABD, UABD, SABA, UABA, MLA, MLS, MUL, PMUL,
SQRDMULH, SQDMULH. (None of these have scalar-3-same versions.)
This completes the non-pairwise integer instructions in this category.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement the SIMD 3-reg-same instructions SQADD, UQADD,
SQSUB, UQSUB, SSHL, USHL, SQSHl, UQSHL, SRSHL, URSHL,
SQRSHL, UQRSHL; these are all simple calls to existing
Neon helpers. We also enable SSHL, USHL, SRSHL and URSHL
for the 3-reg-same-scalar category (but not the others
because they can have non-size-64 operands and the
scalar_3reg_same function doesn't support that yet.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This implements a subset of the AdvSIMD shift operations (namely all the
none saturating or narrowing ones). The actual shift generation code
itself is common for both the scalar and vector cases but wrapped with
either vector element iteration or the fp reg access.
The rounding operations need to take special care to correctly reflect
the result of adding rounding bits on high bits as the intermediates do
not truncate.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement a simple subset of the SIMD 3-same floating point
operations. This includes a common helper function used for both
scalar and vector ops; FABD is the only currently implemented
shared op.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add some of the integer operations in the SIMD 3-same group:
specifically, the comparisons, addition and subtraction.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add support for the logical operations (ORR, AND, BIC, ORN, EOR, BSL,
BIT and BIF) from the SIMD 3 register same group (C3.6.16).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add top level decode for the A64 SIMD three regs same group
(C3.6.16), splitting it into the pairwise, logical, float and
integer subgroups.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement the add, sub and compare ops from the SIMD "scalar three same"
group.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement the absolute-difference instructions in the SIMD
three-different group: SABAL, SABAL2, UABAL, UABAL2, SABDL,
SABDL2, UABDL, UABDL2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add support for the multiply-accumulate instructions from the
SIMD three-different instructions group (C3.6.15):
* skeleton decode of unallocated encodings and split of
the group into its three sub-parts
* framework for handling the 64x64->128 widening subpart
* implementation of the multiply-accumulate instructions
SMLAL, SMLAL2, UMLAL, UMLAL2, SMLSL, SMLSL2, UMLSL, UMLSL2,
UMULL, UMULL2, SMULL, SMULL2
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add support for the AArch32 Advanced SIMD VCVTA, VCVTN, VCVTP
and VCVTM instructions.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for the AArch32 floating-point VCVTA, VCVTN, VCVTP
and VCVTM instructions.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for the AArch32 Advanced SIMD VRINTA, VRINTN, VRINTP
VRINTM and VRINTZ instructions.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This helper sets the rounding mode in the standard_fp_status word to
allow NEON instructions to modify the rounding mode whilst using the
standard FPSCR values for everything else.
Signed-off-by: Will Newton <will.newton@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for the AArch32 Advanced SIMD VRINTX instruction.
Signed-off-by: Will Newton <will.newton@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for the AArch32 floating-point VRINTX instruction.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for the AArch32 floating-point VRINTZ instruction.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for the AArch32 floating-point VRINTR instruction.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for AArch32 ARMv8 FP VRINTA, VRINTN, VRINTP and VRINTM
instructions.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This function will be needed for AArch32 ARMv8 support, so move it to
helper.c where it can be used by both targets. Also moves the code out
of line, but as it is quite a large function I don't believe this
should be a significant performance impact.
Signed-off-by: Will Newton <will.newton@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert the MIDR register to a property. This allows boards to later set
a custom MIDR value. This has been done in such a way to maintain
compatibility with all existing CPUs and boards
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 878613f2f12d4162f12629522fd99de8df904856.1390176489.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for the SIMD scalar copy instruction group (C3.6.7),
which consists of the single instruction DUP (element, scalar).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds support for the AdvSIMD modified immediate group
(C3.6.6) with all its suboperations (movi, orr, fmov, mvni, bic).
Signed-off-by: Alexander Graf <agraf@suse.de>
[AJB: new decode struct, minor bug fixes, optimisation]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This adds support for the all the AdvSIMD vector copy operations
(ARM ARM 3.6.5).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add support for the SIMD "across lanes" instruction group (C3.6.4).
Signed-off-by: Michael Matz <matz@suse.de>
[PMM: Updated to current codebase, added fp min/max ops,
added unallocated encoding checks]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add support for the SIMD ZIP/UZIP/TRN instruction group
(C3.6.3).
Signed-off-by: Michael Matz <matz@suse.de>
[PMM: use new do_vec_get/set etc functions and generally update to new
codebase standards; refactor to pull per-element loop outside switch]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add support for the SIMD TBL/TBLX instructions (group C3.6.2).
Signed-off-by: Michael Matz <matz@suse.de>
[PMM: rewritten to do more of the decode in translate-a64.c,
and to do only one 64 bit pass at a time in the helper]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add support for the SIMD EXT instruction (the only one in its
group, C3.6.1).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add decode skeleton and function placeholders for all the SIMD data
processing instructions. Due to the complexity of this part of the
table the normal extract and switch approach gets very messy very
quickly, so we use a simple data-driven pattern-and-mask approach.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement the SIMD ld/st single structure instructions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This adds support support for the SIMD load/store
multiple category of instructions.
This also brings in a couple of helper functions for manipulating
sections of the SIMD registers:
* do_vec_get - fetch value from a slice of a vector register
* do_vec_set - set a slice of a vector register
which use vec_reg_offset for consistent processing of offsets in an
endian aware manner. There are also additional helpers:
* do_vec_ld - load value into SIMD
* do_vec_st - store value from SIMD
which load or store a slice of a vector register to memory.
These don't zero extend like the fp variants.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Switch the ARMCPUInfo arrays in cpu.c and cpu64.c to use a terminator
entry rather than looping based on ARRAY_SIZE. The latter causes
compile warnings on some versions of gcc if the configure options
happen to result in an empty array.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Add support for FCVT between half, single and double precision.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds support for those instructions in the "Floating-point
data-processing (1 source)" group which are simple 32-bit-to-32-bit
or 64-bit-to-64-bit operations (ie everything except FCVT between
single/double/half precision).
We put the new round-to-int helpers in helper.c because they will
also be used by the new ARMv8 A32/T32 rounding instructions.
Signed-off-by: Alexander Graf <agraf@suse.de>
[WN: Commit message tweak, merged single and double precision patches,
updated to new infrastructure.]
Signed-off-by: Will Newton <will.newton@linaro.org>
[PMM: reworked decode, split FCVT out into their own patch]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add support for the AArch64 floating-point <-> integer conversion
instructions to disas_fpintconv. In the process we can rearrange
and simplify the detection of unallocated encodings a little.
We also correct a typo in the instruction encoding diagram for this
instruction group: bit 21 is 1, not 0.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds emulation for the instruction group labeled
"Floating-point <-> fixed-point conversions" in the ARM ARM.
Namely this includes the instructions SCVTF, UCVTF, FCVTZS, FCVTZU
(scalar, fixed-point).
Signed-off-by: Alexander Graf <agraf@suse.de>
[WN: Commit message tweak, rebased, updated to new infrastructure.
Applied bug fixes from Michael Matz and Janne Grunau.]
Signed-off-by: Will Newton <will.newton@linaro.org>
[PMM: significant cleanup]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Define the full set of floating point to fixed point conversion
helpers required to support AArch64.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The VFP fixed point conversion helpers first call float_scalbn and
then convert the result to an integer. This scalbn operation may
set floating point exception flags for:
* overflow & inexact (if it overflows to infinity)
* input denormal squashed to zero
* output denormal squashed to zero
Of these, we only care about the input-denormal flag, since
the output of the whole scale-and-convert operation will be
an integer (so squashed-output-denormal and overflow don't
apply). Suppress the others by saving the pre-scalb exception
flags and only copying across a potential input-denormal flag.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The VFP conversion helpers for A32 round to zero as this is the only
rounding mode supported. Rename these helpers to make it clear that
they round to zero and are not suitable for use in the AArch64 code.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Make the VFP_CONV_FIX helpers a little more flexible in
preparation for the A64 uses. This requires two changes:
* use the correct softfloat conversion function based on itype
rather than always the int32 one; this is possible now that
softfloat provides int16 versions and necessary for the
future conversion-to-int64 A64 variants. This also allows
us to drop the awkward 'sign' macro argument.
* split the 'fsz' argument which currently controls both
width of the input float type and width of the output
integer type into two; this will allow us to specify the
A64 64-bit-int-to-single conversion function, where the
two widths are different.
We can also drop the (itype##_t) cast now that softfloat
guarantees that all the itype##_to_float* functions take
an integer argument of exactly the correct type.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
commit 5ce4f35781
"target-arm: A64: add set_pc cpu method"
introduces an array aarch64_cpus which is zero
size if this code is built without CONFIG_USER_ONLY.
In particular an attempt to iterate over this array produces a warning
under gcc 4.8.2:
CC aarch64-softmmu/target-arm/cpu64.o
/scm/qemu/target-arm/cpu64.c: In function ‘aarch64_cpu_register_types’:
/scm/qemu/target-arm/cpu64.c:124:5: error: comparison of unsigned
expression < 0 is always false [-Werror=type-limits]
for (i = 0; i < ARRAY_SIZE(aarch64_cpus); i++) {
^
cc1: all warnings being treated as errors
This is the result of ARRAY_SIZE being an unsigned type,
causing "i" to be promoted to unsigned int as well.
As zero size arrays are a gcc extension, it seems
cleanest to add a dummy element with NULL name,
and test for it during registration.
We'll be able to drop this when we add more CPUs.
Cc: Alexander Graf <agraf@suse.de>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20131223145216.GA22663@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is an inline duplication of the raw_read and raw_write function
bodies. Fix by just calling raw_read/raw_write instead.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: e69281b7e1462b346cb313cf0b89eedc0568125f.1388649290.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use c13_context field instead of c13_fcse for CONTEXTIDR register
definition.
Signed-off-by: Sergey Fedorov <s.fedorov@samsung.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1387521191-15350-1-git-send-email-s.fedorov@samsung.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When setting rounding modes we currently just hardcode the numeric values
for rounding modes in a big switch statement.
With AArch64 support coming, we will need to refer to these rounding modes
at different places throughout the code though, so let's better give them
names so we don't get confused by accident.
Signed-off-by: Alexander Graf <agraf@suse.de>
[WN: Commit message tweak, use names from ARM ARM.]
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This adds decoding support for C3.6.24 FP conditional select.
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This adds decoding support for C3.6.23 FP Conditional Compare.
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add decoding support for C3.6.22 Floating-point compare.
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds emulation for the fmov instruction working on scalars
with an immediate payload.
Signed-off-by: Alexander Graf <agraf@suse.de>
[WN: Commit message tweak, rebase and use new infrastructure.]
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds emulation for the "Floating-point data-processing (3 source)"
group of instructions.
Signed-off-by: Alexander Graf <agraf@suse.de>
[WN: Commit message tweak, merged single and double precision patches.
Implement using muladd as suggested by Richard Henderson.]
Signed-off-by: Will Newton <will.newton@linaro.org>
[PMM: pull field decode up a level, use register accessors]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds emulation for the "Floating-point data-processing (2 source)"
group of instructions.
Signed-off-by: Alexander Graf <agraf@suse.de>
[WN: Commit message tweak, merge single and double precision patches. Rebase
and update to new infrastructure. Incorporate FMIN/FMAX support patch by
Michael Matz.]
Signed-off-by: Will Newton <will.newton@linaro.org>
[PMM:
* added convenience accessors for FP s and d regs
* pulled the field decode and opcode validity check up a level]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Use the VFP_BINOP macro to provide helpers for min, max, minnum
and maxnum, rather than hand-rolling them. (The float64 max
version is not used by A32 but will be needed for A64.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The A64 128 bit vector registers are stored as a pair of
uint64_t values in the register array. This means that if
we're directly loading or storing a value of size less than
64 bits we must adjust the offset appropriately to account
for whether the host is bigendian or not. Provide utility
functions to abstract away the offsetof() calculations for
the FP registers.
For do_fp_st() we can sidestep most of the issues for 64 bit
and smaller reg-to-mem transfers by always doing a 64 bit
load from the register and writing just the piece we need
to memory.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
When dumping the current CPU state, we can also get a request
to dump the FPU state along with the CPU's integer state.
Add support to dump the VFP state when that flag is set, so that
we can properly debug code that modifies floating point registers.
Signed-off-by: Alexander Graf <agraf@suse.de>
[WN: Commit message tweak, rebased. Output all registers, two per-line.]
Signed-off-by: Will Newton <will.newton@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This implement exclusive loads/stores for aarch64 along the lines of
arm32 and ppc implementations. The exclusive load remembers the address
and loaded value. The exclusive store throws an an exception which uses
those values to check for equality in a proper exclusive region.
This is not actually the architecture mandated semantics (for either
AArch32 or AArch64) but it is close enough for typical guest code
sequences to work correctly, and saves us from having to monitor all
guest stores. It's fairly easy to come up with test cases where we
don't behave like hardware - we don't for example model cache line
behaviour. However in the common patterns this works, and the existing
32 bit ARM exclusive access implementation has the same limitations.
AArch64 also implements new acquire/release loads/stores (which may be
either exclusive or non-exclusive). These imposes extra ordering
constraints on memory operations (ie they act as if they have an implicit
barrier built into them). As TCG is single-threaded all our barriers
are no-ops, so these just behave like normal loads and stores.
Signed-off-by: Michael Matz <matz@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
In preparation for adding support for A64 load/store exclusive instructions,
widen the fields in the CPU state struct that deal with address and data values
for exclusives from 32 to 64 bits. Although in practice AArch64 and AArch32
exclusive accesses will be generally separate there are some odd theoretical
corner cases (eg you should be able to do the exclusive load in AArch32, take
an exception to AArch64 and successfully do the store exclusive there), and it's
also easier to reason about.
The changes in semantics for the variables are:
exclusive_addr -> extended to 64 bits; -1ULL for "monitor lost",
otherwise always < 2^32 for AArch32
exclusive_val -> extended to 64 bits. 64 bit exclusives in AArch32 now
use the high half of exclusive_val instead of a separate exclusive_high
exclusive_high -> is no longer used in AArch32; extended to 64 bits as
it will be needed for AArch64's pair-of-64-bit-values exclusives.
exclusive_test -> extended to 64 bits, as it is an address. Since this is
a linux-user-only field, in arm-linux-user it will always have the top
32 bits zero.
exclusive_info -> stays 32 bits, as it is neither data nor address, but
simply holds register indexes etc. AArch64 will be able to fit all its
information into 32 bits as well.
Note that the refactoring of gen_store_exclusive() coincidentally fixes
a minor bug where ldrexd would incorrectly update the first CPU register
even if the load for the second register faulted.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Adds support for Load Register (literal), both normal
and SIMD/FP forms.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
this patch adds support for C3.5.4 - C3.5.5
Conditional compare (both immediate and register)
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The common pattern for system registers in a 64-bit capable ARM
CPU is that when in AArch32 the cp15 register is a view of the
bottom 32 bits of the 64-bit AArch64 system register; writes in
AArch32 leave the top half unchanged. The most natural way to
model this is to have the state field in the CPU struct be a
64 bit value, and simply have the AArch32 TCG code operate on
a pointer to its lower half.
For aarch64-linux-user the only registers we need to share like
this are the thread-local-storage ones. Widen their fields to
64 bits and provide the 64 bit reginfo struct to make them
visible in AArch64 state. Note that minor cleanup of the AArch64
system register encoding space means We can share the TPIDR_EL1
reginfo but need split encodings for TPIDR_EL0 and TPIDRRO_EL0.
Since we're touching almost every line in QEMU that uses the
c13_tls* fields in this patch anyway, we take the opportunity
to rename them in line with the standard ARM architectural names
for these registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement an initial minimal set of EL0-visible system registers:
* NZCV
* FPCR
* FPSR
* CTR_EL0
* DCZID_EL0
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
The AArch64 equivalent of the traditional AArch32
cp15 coprocessor registers is the set of instructions
MRS/MSR/SYS/SYSL, which cover between them both true
system registers and the "operations with side effects"
such as cache maintenance which in AArch32 are mixed
in with other cp15 registers. Implement these instructions
to look in the cpregs hashtable for the register or
operation.
Since we don't yet populate the cpregs hashtable with
any registers with the "AA64" bit set, everything will
still UNDEF at this point.
MSR/MRS is the first user of is_jmp = DISAS_UPDATE, so
fix an infelicity in its handling where the main loop
was requiring the caller to do the update of PC rather
than just doing it itself.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The cpregs APIs used by the decoder (get_arm_cp_reginfo() and
cp_access_ok()) currently take either a CPUARMState* or an ARMCPU*.
This is problematic for the A64 decoder, which doesn't pass the
environment pointer around everywhere the way the 32 bit decoder
does. Adjust the parameters these functions take so that we can
copy only the relevant info from the CPUARMState into the
DisasContext and then use that.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Replace assert_no_error() usages with the error_abort system.
&error_abort is passed into API calls to signal to the Error sub-system
that any errors are fatal. Removes need for caller assertions.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Update the generic cpreg support code to also handle AArch64:
AArch64-visible registers coexist in the same hash table with
AArch32-visible ones, with a bit in the hash key distinguishing
them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
define_one_arm_cp_reg_with_opaque() has a set of nested loops which
insert a cpreg entry into the hashtable for each of the possible
opc/crn/crm values allowed by wildcard specifications. We're about
to add an extra loop to this nesting, so pull the core of the loop
(which adds a single entry to the hashtable) out into its own
function for clarity.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement FMOV, ie non-converting moves between general purpose
registers and floating point registers. This is a subtype of
the floating point <-> integer instruction class.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add a top level decoder skeleton for FP instructions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add decoding for the exception generating instructions, and implement
SVC (syscalls) and BRK (software breakpoint).
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds emulation for the "Data-processing (3 source)"
family of instructions, namely MADD, MSUB, SMADDL, SMSUBL, SMULH,
UMADDL, UMSUBL, UMULH.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds emulation for the mov wide instructions
(MOVN, MOVZ, MOVK).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement the non-carry forms of addition and subtraction
(immediate, extended register and shifted register).
This includes the code to calculate NZCV if the instruction
calls for setting the flags.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This adds support for the pre/post-index ld/st forms with immediate
offsets as well as the un-scaled immediate form (which are all
variations on the same 9-bit immediate instruction form).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This adds support for the load/store forms using a register offset.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This adds support for the forms of ld/st with a 12 bit
unsigned immediate offset.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch support the basic load and store pair instructions and
includes the generic helper functions:
* do_gpr_st()
* do_fp_st()
* do_gpr_ld()
* do_fp_ld()
* read_cpu_reg_sp()
* gen_check_sp_alignment()
The last function gen_check_sp_alignment() is a NULL op currently but
put in place to make it easy to add SP alignment checking later.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds support for C3.4.4 Logical (immediate),
which include AND, ANDS, ORR, EOR.
Signed-off-by: Alexander Graf <agraf@suse.de>
[claudio: adapted to new decoder, function renaming,
removed a TCG temp variable]
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
[PMM: cleaned up some unnecessary code in logic_imm_decode_wmask
and added clarifying commentary on what it's actually doing.
Dropped an ext32u that's not needed if we've just done an AND.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
this patch adds support for the CLS instruction.
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This adds support for C5.6.149 REV, C5.6.151 REV32, C5.6.150 REV16.
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This adds support for the C5.6.147 RBIT instruction.
Signed-off-by: Alexander Graf <agraf@suse.de>
[claudio: adapted to new decoder, use bswap64,
make RBIT part standalone from the rest of the patch,
splitting REV into a separate patch]
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds support for decoding 1-src data processing insns,
and the first user, C5.6.40 CLZ (count leading zeroes).
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds support for decoding 2-src data processing insns,
and the first users, UDIV and SDIV.
Signed-off-by: Alexander Graf <agraf@suse.de>
[claudio: adapted to new decoder adding the 2-src decoding level,
always zero-extend result in 32bit mode]
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds emulation support for the EXTR instruction.
Signed-off-by: Alexander Graf <agraf@suse.de>
[claudio: adapted for new decoder, removed a few temporaries,
fixed the 32bit bug, added checks for more
unallocated cases]
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add support for the instructions described in
"C3.4.6 PC-rel. addressing" (ADR and ADRP).
Signed-off-by: Alexander Graf <agraf@suse.de>
[claudio: adapted to new decoder structure]
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for the instructions described in "C3.5.10 Logical
(shifted register)".
We store the flags in the same locations as the 32 bit decoder.
This is slightly awkward when calculating 64 bit results, but seems
a better tradeoff than having to rework the whole 32 bit decoder
and also make 32 bit result calculation in A64 awkward.
Signed-off-by: Alexander Graf <agraf@suse.de>
[claudio: some refactoring to avoid hidden allocation of temps,
rework flags, use enums for shift types,
renaming of functions]
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
[PMM: Use TCG's andc/orc/eqv ops rather than manually inverting]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds support for the instruction group "C3.5.6
Conditional select": CSEL, CSINC, CSINV, CSNEG.
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
[PMM: Improved code generated in the nomatch case as per RTH suggestions]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds emulation for the compare and branch insns,
CBZ and CBNZ.
Signed-off-by: Alexander Graf <agraf@suse.de>
[claudio: adapted to new decoder,
compare with immediate 0,
introduce read_cpu_reg to get the 0 extension on (!sf)]
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds emulation for the test and branch insns,
TBZ and TBNZ.
Signed-off-by: Alexander Graf <agraf@suse.de>
[claudio:
adapted for new decoder
always compare with 0
remove a TCG temporary
]
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch adds emulation for the conditional branch (b.cond) instruction.
Signed-off-by: Alexander Graf <agraf@suse.de>
[claudio: adapted to new decoder structure,
reused arm infrastructure for checking the flags]
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement BR, BLR and RET. This is all of the 'unconditional
branch (register)' instruction category except for ERET
and DPRS (which are system mode only).
Signed-off-by: Alexander Graf <agraf@suse.de>
[claudio: reimplemented on top of new decoder structure]
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement the B and BL instructions (PC relative branches and calls).
For convenience in managing TCG temporaries which might be generated
if a source register is the zero-register XZR, we provide a simple
mechanism for creating a new temp which is automatically freed at the
end of decode of the instruction.
Signed-off-by: Alexander Graf <agraf@suse.de>
[claudio: renamed functions, adapted to new decoder layout]
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Decode the various kinds of system instructions:
hints (HINT), which include NOP, YIELD, WFE, WFI, SEV, SEL
sync instructions, which include CLREX, DSB, DMB, ISB
msr_i, which move immediate to processor state field
sys, which include all SYS and SYSL instructions
msr, which move from a gp register to a system register
mrs, which move from a system register to a gp register
Provide implementations where they are trivial nops.
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Provide a skeleton for a64 instruction decoding in translate-a64.c,
by dividing instructions into the classes defined by the
ARM Architecture Reference Manual(DDI0487A_a) section C3.
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
We will need helpers that only make sense with AArch64. Add
helper-a64.{c,h} files as stubs that we can fill with these
helpers in the following patches.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Register the aarch64-fpu XML and implement the necessary
read/write handlers so we can support reading and writing
of FP registers in the gdb stub.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The information which AArch32 holds in the FPSCR is split for
AArch64 into two logically distinct registers, FPSR and FPCR.
Since they are carefully arranged to use non-overlapping bits,
we leave the underlying state in the same place, and provide
accessor functions which just update the appropriate bits
via vfp_get_fpscr() and vfp_set_fpscr().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
When executing translation blocks we need to be able to recover
our program counter. Add a method to set it for AArch64 CPUs.
This covers user-mode, but for system mode emulation we will
need to check if the CPU is in an AArch32 execution state.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The A32/T32 gen_intermediate_code_internal() is complicated because it
has to deal with:
* conditionally executed instructions
* Thumb IT blocks
* kernel helper page
* M profile exception-exit special casing
None of these apply to A64, so putting the "this is A64 so
call the A64 decoder" check in the middle of the A32/T32
loop is confusing and means the A64 decoder's handling of
things like conditional jump and singlestepping has to take
account of the conditional-execution jumps the main loop
might emit.
Refactor the code to give A64 its own gen_intermediate_code_internal
function instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add the bare minimum set of functions needed for control of an
AArch64 KVM vcpu:
* CPU initialization
* minimal get/put register functions which only handle the
basic state of the CPU
Signed-off-by: Mian M. Hamayun <m.hamayun@virtualopensystems.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1385645602-18662-4-git-send-email-peter.maydell@linaro.org
[PMM: significantly overhauled; most notably:
* code lives in kvm64.c rather than using #ifdefs
* support '-cpu host' rather than implicitly using whatever the
host's CPU is regardless of what the user requests
* fix bug attempting to get/set nonexistent X[31]
* fix bug writing 64 bit kernel pstate into uint32_t env field
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
The env->pstate field is a little odd since it doesn't strictly
speaking represent an architectural register. However it's convenient
for QEMU to use it to hold the various PSTATE architectural bits
in the same format the architecture specifies for SPSR registers
(since this is the same format the kernel uses for signal handlers
and the KVM register). Add some structure to how we deal with it:
* document what env->pstate is
* add some #defines for various bits in it
* add helpers for reading/writing it taking account of caching
of NZCV, and use them where appropriate
* reset it on startup
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1385645602-18662-3-git-send-email-peter.maydell@linaro.org
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Split ARM KVM support code which is 32 bit specific out into its
own file, which we only compile on 32 bit hosts. This will give
us a place to add the 64 bit support code without adding lots of
ifdefs to kvm.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1385645602-18662-2-git-send-email-peter.maydell@linaro.org
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Peter Maydell
Rob Herring
Stefan Weil
Alex Bennée
Andreas Färber
Richard Henderson
Alistair Francis
Will Newton
Christoffer Dall
Edgar E. Iglesias
Claudio Fontana
Michael Matz
Alexey Kardashevskiy
Alexander Graf
Michael S. Tsirkin
Peter Crosthwaite
Sergey Fedorov
Mian M. Hamayun