In tc-arc.h we redefine constants that are also defined in the
include/opcode/arc.h header file. The problem is that changing one
without changing the other resulting in strange crashes.
We could comment both locations to stress the importance of remembering
to update the other location too, or we could just include the
opcode/arc.h header file into the assembler.
Given that other targets include their opcode/ARCH.h header file, and
only having a single definition, where possible, is usually the safest
solution, that's what I switch too with this commit.
gas/ChangeLog:
* config/tc-arc.h: Include 'opcode/arc.h'.
(MAX_INSN_ARGS): Delete.
(MAX_INSN_FLGS): Delete.
Providing declarations in tc.h points out that alpha wasn't properly marking
FLT_CHARS as const. We can also get rid of the confusing redefinition of
X_CHARS to mmix_x_chars. Finally we can get rid of some now redundant
declarations of these constants.
gas/ChangeLog:
2016-04-03 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-alpha.c: Const qualify FLT_CHARS.
* config/atof-ieee.c: Remove declarations of FLT_CHARS and EXP_CHARS.
* config/tc-cris.h: Likewise.
* expr.c: Likewise.
* config/tc-mmix.c (md_atof): Adjust comment.
* config/tc-mmix.h: Stop defining FLT_CHARS and EXP_CHARS as macros.
* tc.h: Declare FLT_CHARS and EXP_CHARS.
It needs a few more things to be const now.
gas/ChangeLog:
2016-04-03 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-score.c (s3_gen_reloc): Add const qualifiers.
* config/tc-score7.c (s7_gen_reloc): Likewise.
It is only ever assigned values in the enum, and it is passed to functions that
expect the argument's type to be the enum.
gas/ChangeLog:
2016-04-03 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-arm.c (do_t_branch): Change the type of reloc to
bfd_reloc_code_real_type.
Its not used for anything outside of md_assemble () so it doesn't need to be
extern. While we are there we can replace free () and xmalloc () with
XRESIZEVEC which should be faster.
gas/ChangeLog:
2016-04-03 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/bfin-parse.y (current_inputline): Remove definition.
* config/tc-bfin.c (md_assemble): Simplify use of current_inputline.
Instead of canonicalizing the argument we can just use a case insensitive
compare.
gas/ChangeLog:
2016-04-03 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-avr.c (md_parse_option): Use strcasecmp () to compare
strings.
Small spelling mistake in a #define, fixed in this commit.
gas/ChangeLog:
* config/tc-arc.h (MAX_FLAG_NAME_LENGHT): Rename to...
(MAX_FLAG_NAME_LENGTH): ...this.
(struct arc_flags): Update to use MAX_FLAG_NAME_LENGTH.
* config/tc-arc.c (tokenize_flags): Likewise.
Xtensa uses it in several macros passing it a literal string, so its convenient
for the argument type to be const char *. However some of the code in
symbols.c seems to assume tc_canonicalize_symbol_name () will return a non
const pointer, and some other target's implementations even modify the
argument, so it seems best to return a char * which means casting away const on
the argument when we return it instead of another string.
gas/ChangeLog:
2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-xtensa.c (struct rename_section_struct): Make old_name
const.
(xtensa_section_rename): Make argument type const char *.
* config/tc-xtensa.h (xtensa_section_rename): Adjust.
parse_ldconst () takes a char ** as a in / out argument, and sometimes points
args[0] to a constant string. Then in some cases after parse_ldconst ()
returns md_assemble () twiddles the contents of arg[0]. So it seems like
it would take some work to avoid these casts, and its not really clear
that work is worth it.
gas/ChangeLog:
2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-i960.c (parse_ldconst): Cast to char * when assigning to
args[0].
For these targets its not clear how md_assemble can usefully be split up so
that part can take const char *. There is also a fair number of targets that
need md_assemble () to take a char *, so we can't easily make the argument
const. So since there isn't many callers it seems easiest to just add a couple
of casts.
gas/ChangeLog:
2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-m32c.c (m32c_md_end): cast the argument to md_assemble to
char *.
(m32c_indirect_operand): Likewise.
* config/tc-nds32.c (do_pseudo_b): Likewise.
(do_pseudo_bal): Likewise.
(do_pseudo_ls_bhw): Likewise.
get_symbol_name () returns a char * in a out arg, which means we need to cast
to assign a literal to the variable passed to get_symbol_name (). It seems
like better APIs than get_symbol_name () could be provided, but that seems like
a fair amount of work so just casting seems to be the betterthing to do for
now.
gas/ChangeLog:
2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-ia64.c (md_assemble): Add temporary variable to pass to
get_symbol_name ().
* config/tc-sparc.c (s_register): Cast a literal to char * in
assignment.
various places either directly or indirectly set input_line_pointer to point at
a literal. Currently lots of places modify the string input_line_pointer
points at, so making it const isn't easy. Since most if not all of these
places assign to input_line_pointer to parse an expression it would probably be
best to add ways to generate and deal with expressions that doesn't involve
parsing strings, but for now adding some casts seems easiest.
gas/ChangeLog:
2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-i960.c (parse_expr): Cast to char * when assigning to
input_line_pointer.
* config/tc-m32r.c (expand_debug_syms): Likewise.
* config/tc-msp430.c (msp430_dstoperand): Likewise.
* config/tc-z80.c (md_begin): Likewise.
* stabs.c (stabs_generate_asm_func): Likewise.
these places define char arrays containing values greater than 0x80 which
doesn't fit in an 8 bit signed char, but does fit in an unsigned one.
gas/ChangeLog:
2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-aarch64.c (aarch64_handle_align): Make the type of some
variables unsigned char[].
* config/tc-alpha.c (alpha_handle_align): Likewise.
* config/tc-arm.c (arm_handle_align): Likewise.
* config/tc-z80.c: Likewise.
This name describes what the variable means slightly better, and the enum with
two values that is only used for this one variable is kind of silly.
gas/ChangeLog:
2016-03-25 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* as.c (parse_args): Adjust.
* as.h (flag_size_check): Rename to flag_allow_nonconst_size.
* config/obj-elf.c (elf_frob_symbol): Adjust.
In the SPARC V9 (and later) versions of the SPARC specification, the
section C.1.1 "Register Names" specifies that:
"asr_reg. An asr_reg is an Ancillary State Register name. It may have
one of the following values:
%asr16-%asr31"
The rationale of having this restriction was that the registers from 16
to 31 are reserved to implementations, and are therefore "non-V9". It
also assumes that the existing ASR registers in the range 0..31 will
have their own names such as %y, that can be used to access such
registers.
However, this is problematic. When a new ASR register is introduced,
such as %mcdper a.k.a. %asr14, it is useful to be able to use %asr14 in
order to not depend on the latest version of the assembler.
The Solaris assembler is lax and allows to assembly instructions
referring to %asr0 to %asr31. This patch makes the GNU assembler to
mimic that behavior.
gas/ChangeLog:
2016-03-24 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c (sparc_ip): Remove the V9 restriction on ASR
registers to be in the 16..31 range.
frag_var () assigns its last argument to frag::fr_opcode, and it turns out
some targets modify the string that points to. However it appears niether the
generic code or the microblaze code modifies what fr_opcode points to, so this
code should be safe. So we unfortunately need to cast to char * when passing
an argument to frag_var () but otherwise microblaze can itself point to these
strings with const char *.
gas/ChangeLog:
2016-03-24 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-microblaze.c (md_assemble): Cast opc to char * when calling
frag_var ().
I'm not sure the string it returns is particularly useful, or better than the
string returned by other atof implementations on failure, but given the others
return a localized string it seems like this one should too.
gas/ChangeLog:
2016-03-24 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-visium.c (md_atof): Localize the string returned on
failure.
if the condition is true then we know that str already points to a'\0' in the
string passed to the function. Since we know the latter part of the function
doesn't modify that string, and str already points to a null byte there's no
point in changing str to point to a literal empty string.
gas/ChangeLog:
2016-03-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-pdp11.c (md_assemble): Remove useless if and assignment to
str.
This lets us avoid assigning a literal to a char *, and perhaps more
importantly makes it clearer what is going on here.
gas/ChangeLog:
2016-03-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-sparc.c (sparc_regname_to_dw2regnum): Replace strchr ()
call with a switch.
This increases consistancy of how we allocate memory, and always casting the
result to the proper type. It also helps make sure we get any use of sizeof on
the result type correct.
gas/ChangeLog:
2016-03-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* listing.c (listing_message): Use XNEW style allocation macros.
* read.c (read_a_source_file): Likewise.
(read_symbol_name): Likewise.
(s_mri_common): Likewise.
(assign_symbol): Likewise.
(s_reloc): Likewise.
(emit_expr_with_reloc): Likewise.
(s_incbin): Likewise.
(s_include): Likewise.
* sb.c (sb_build): Likewise.
(sb_check): Likewise.
One of the tic54x testcases looks for a section alignment of 1. After
9136aa49 the alignment became 0. While it happens that an alignment
of 0 is treated as an alignment of 1, there is no reason to not apply
the explicit alignment.
* write.c (record_alignment): Revert 2016-02-18 change.
bfd * warning.m4 (GCC_WARN_CFLAGS): Only add -Wstack-usage if using a
sufficiently recent version of GCC.
* configure: Regenerate.
others * configure: Regenerate.
Adds the first few nps400 instructions.
gas/ChangeLog:
* testsuite/gas/arc/nps400-0.d: New file.
* testsuite/gas/arc/nps400-0.s: New file.
* testsuite/gas/arc/nps400-1.d: New file.
* testsuite/gas/arc/nps400-1.s: New file.
include/ChangeLog:
* opcodes/arc.h (insn_class_t): Add BITOP type.
opcodes/ChangeLog:
* arc-nps400-tbl.h: New file.
* arc-opc.c: Add top level comment.
(insert_nps_3bit_dst): New function.
(extract_nps_3bit_dst): New function.
(insert_nps_3bit_src2): New function.
(extract_nps_3bit_src2): New function.
(insert_nps_bitop_size): New function.
(extract_nps_bitop_size): New function.
(arc_flag_operands): Add nps400 entries.
(arc_flag_classes): Add nps400 entries.
(arc_operands): Add nps400 entries.
(arc_opcodes): Add nps400 include.
When parsing the operand instruction flags we don't currently detect the
case where multiple flags are provided from the same class set, these
will be accepted and the bit values merged together, resulting in the
wrong instruction being assembled. For example:
adc.n.eq r0,r0,r2
Will assemble without error, yet, upon disassembly, the instruction will
actually be:
adc.c r0,r0,r2
In a later commit the concept of required flags will be introduced.
Required flags are just like normal instruction flags, except that they
must be present for the instruction to match. Adding this will allow
for simpler instructions in the instruction table, and allow for more
sharing of operand extraction and insertion functions.
To solve both of the above issues (multiple flags being invalid, and
required flags), this commit reworks the flag class mechanism.
Currently the flag class is never used. Each instruction can reference
multiple flag classes, each flag class has a class type and a set of
flags. However, at present, the class type is never used. The current
values identify the type of instruction that the flag will be used in,
but this is not required information.
Instead, this commit discards the old flag classes, and introduces 3 new
classes. The first F_CLASS_NONE, is just a NULL marker value, and is
only used in the NULL marker flag class. The other two flag classes are
F_FLAG_OPTIONAL, and F_FLAG_REQUIRED.
The class F_FLAG_OPTIONAL has the property that at most one of the flags
in the flag set for that class must be present in the instruction. The
"at most" one means that no flags being present is fine.
The class F_FLAG_REQUIRED is not currently used, but will be soon. With
this class, exactly one of the flags from this class must be present in
the instruction. If the flag class contains a single flag, then of
course that flag must be present. However, if the flag class contained
two or more, then one, and only one of them must be present.
gas/ChangeLog:
* config/tc-arc.c (find_opcode_match): Move lnflg, and i
declarations to start of block. Reset code on all flags before
attempting to match them. Handle multiple hits on the same flag.
Handle flag class.
* testsuite/gas/arc/asm-errors.d: New file.
* testsuite/gas/arc/asm-errors.err: New file.
* testsuite/gas/arc/asm-errors.s: New file.
include/ChangeLog:
* opcode/arc.h (flag_class_t): Remove all old flag classes, add 3
new classes instead.
opcodes/ChangeLog:
* arc-opc.c (arc_flag_classes): Convert all flag classes to use
the new class enum values.
This commit introduces the nps400 machine type as a variant of arc.
There's a new flag in the assembler to select this machine type. All
other changes are just adding handling of the new machine type into the
relevant places.
The nps400 is an arc700 variant with some vendor specific instructions
added into the instruction set. This commit does not add any of the new
instructions, this is just laying the groundwork for future commits.
However, in preparation for these new instructions a new opcode define for
nps400 has been added to include/opcode/arc.h, this new opcode define is
used in the assembler and disassembler along with the existing define
for arc700 such that when assembling and disassembling for nps400 the
user will have access to all arc700 instructions and all the nps400
vendor extension instructions.
bfd/ChangeLog:
* archures.c (bfd_mach_arc_nps400): Define.
* bfd-in2.h: Regenerate.
* cpu-arc.c (arch_info_struct): New entry for nps400, renumber
some existing entries to make space.
* elf32-arc.c (arc_elf_object_p): Add nps400 case.
(arc_elf_final_write_processing): Likewise.
binutils/ChangeLog:
* readelf.c (decode_ARC_machine_flags): Handle nps400.
gas/ChangeLog:
* config/tc-arc.c (cpu_types): Add nps400 entry.
(check_zol): Handle nps400.
include/ChangeLog:
* elf/arc.h (E_ARC_MACH_NPS400): Define.
* opcode/arc.h (ARC_OPCODE_NPS400): Define.
opcodes/ChangeLog:
* arc-dis.c (print_insn_arc): Handle nps400.
The constant EF_ARC_CPU_GENERIC is defined in the include/elf/arc.h
file, and is used in a few places in binutils, however, this constant
should never make it into the elf header flags; we always set a valid
cpu type in the assembler, which should then be copied over during
linking.
There are some non-gnu arc compilers that don't write an architecture
type into the e_flags field, instead leaving the field as 0, which is
the EF_ARC_CPU_GENERIC value. This non-gnu compiler uses the machine
type to distinguish between the old and newer arc architectures, setting
the machine type to EM_ARC_COMPACT for old arc600, arc601, and arc700
architectures, while using EM_ARC_COMPACT2 for newer arcem and archs
architectures.
Previously when displaying the machine flags for an older EM_ARC_COMPACT
machine, if the e_flags had not been filled in, then we relied on the
default case statement to display the message "Generic ARCompact", while
in the EM_ARC_COMPACT2 case we specifically handled EF_ARC_CPU_GENERIC
to print "ARC Generic", leaving the default case to print a message
about unrecognised cpu flag.
After this commit EF_ARC_CPU_GENERIC has been removed, for both machine
types EM_ARC_COMPACT and EM_ARC_COMPACT2 we now rely on the default case
statement to handle the situation where the e_flags has not been filled
in. The message displayed is now "Unknown ARCompact" (for older arc
architectures) and "Unknown ARC" (for the newer architectures). The
switch from "Generic" to "Unknown" in the message string is for clarity,
calling the file "Generic" can give the impression that the file is
compiled for a common sub-set of the architectures, and would therefore
run on any type of machine (or at least any type of new or old machine
depending on if the machine type is ARC or ARCv2). However, this was
not what "Generic" meant, it really meant "Unknown", so that's what we
now say.
As part of the merging of the readelf flag reading code, I have unified
the strings used in displaying the ELF ABI. This means that for older
arc machines (arc600, arc601, and arc700) the string used for the
original ABI, and ABIv2 have changed, the current ABIv3 remains the
same. For the newer architectures (arcem and archs) the abi strings
remain unchanged in all cases.
bfd/ChangeLog:
* elf32-arc.c (arc_elf_print_private_bfd_data): Remove use of
EF_ARC_CPU_GENERIC.
(arc_elf_final_write_processing): Don't bother setting cpu field
in e_flags, this will have been set elsewhere.
binutils/ChangeLog:
* readelf.c (get_machine_flags): Move arc processing into...
(decode_ARC_machine_flags): ... new function. Remove use of
EF_ARC_CPU_GENERIC, change default case from "generic arc" to
"unknown arc". Merged ABI printing between two machine types.
gas/ChangeLog:
* config/tc-arc.c (arc_select_cpu): Remove use of
EF_ARC_CPU_GENERIC.
include/ChangeLog:
* elf/arc.h (EF_ARC_CPU_GENERIC): Delete. Update related comment.
This commit restructures the selection of the default cpu/mach so that
the choice is made from md_begin (if the user has not provided a command
line choice). This will reduce the amount of change needed in a later
patch.
At the request of Synopsys, the default architecture changes to ARC700
from this commit, previously the default was a non-existent
super-architecture that contained all instructions from all arc
variants. There's some clean up associated with removing the default
merged architecture, and a small test fix now that the default is
ARC700.
binutils/ChangeLog:
* testsuite/binutils-all/objdump.exp (cpus_expected): Add ARC700
to the architecture list.
gas/ChangeLog:
* config/tc-arc.c (arc_target): Delay initialisation until
arc_select_cpu.
(arc_target_name): Likewise.
(arc_features): Likewise.
(arc_mach_type): Likewise.
(cpu_types): Remove "all" entry.
(arc_select_cpu): New function, most of the content is from...
(md_parse_option): ... here. Call new arc_select_cpu.
(md_begin): Call arc_select_cpu if needed, default is now arc700.
include/ChangeLog:
* opcode/arc.h (ARC_OPCODE_BASE): Delete.
opcodes/ChangeLog:
* arc-opc.c (BASE): Delete.
The inline-data test checks the specific bytes laid down by the
assembler, and so relies on the endianness of the target. I could
change the expected results to be endian agnostic, however, I worried
that a bug in the assembler that gets the endianness wrong would then
slip through. Instead I add a new test for big-endian arc, and restrict
the existing test to little-endian arc.
gas/ChangeLog:
* testsuite/gas/arc/inline-data-1.d: Add target restriction.
* testsuite/gas/arc/inline-data-2.d: New file.
char can be a signed type, and some of the values in these arrays are greater
than 0x80 which means they are outside of the range a signed char can store.
Fortunately it seems most compilers handle this in the obvious way by storing
the same bits as a negative number, but this is wierd and easily fixed.
gas/ChangeLog:
2016-03-20 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* tc-i386.c (f32_1): Change type to unsigned char[].
(f32_2): Likewise.
(f32_3): Likewise.
(f32_4): Likewise.
(f32_5): Likewise.
(f32_6): Likewise.
(f32_7): Likewise.
(f32_8): Likewise.
(f32_9): Likewise.
(f32_10): Likewise.
(f32_11): Likewise.
(f32_12): Likewise.
(f32_13): Likewise.
(f32_14): Likewise.
(f16_3): Likewise.
(f16_4): Likewise.
(f16_5): Likewise.
(f16_6): Likewise.
(f16_7): Likewise.
(f16_8): Likewise.
(jump_31): Likewise.
(f32_patt): Likewise.
(f16_patt): Likewise.
(alt_3): Likewise.
(alt_4): Likewise.
(alt_5): Likewise.
(alt_6): Likewise.
(alt_7): Likewise.
(alt_8): Likewise.
(alt_9): Likewise.
(alt_10): Likewise.
(alt_patt): Likewise.
PR target/19721
opcodes * aarch64-tbl.h (aarch64_opcode_table): Fix type of second operand
of MOV insn that aliases an ORR insn.
gas * testsuite/gas/aarch64/pr19721.s: New test source file.
* testsuite/gas/aarch64/pr19721.d: New test driver file.
gas * doc/as.texinfo: Place the target specific command line options
into their own man page section.
etc * texi2pod.pl: Add TARGET to the list of recognised man page
sections.
gas/
* config/tc-arm.c (N_S_32): New.
(N_F_16_32): Likewise.
(N_SUF_32): Support N_F16.
(N_IF_32): Likewise.
(neon_dyadic_misc): Likewise.
(do_neon_cmp): Likewise.
(do_neon_cmp_inv): Likewise.
(do_neon_mul): Likewise.
(do_neon_fcmp_absolute): Likewise.
(do_neon_step): Likewise.
(do_neon_abs_neg): Likewise.
(CVT_FLAVOR_VAR): Likewise.
(do_neon_cvt_1): Likewise.
(do_neon_recip_est): Likewise.
(do_vmaxnm): Likewise.
(do_vrint_1): Likewise.
(neon_check_type): Check architecture support for FP16 extension.
(insns): Update comments.
* testsuite/gas/arm/armv8-2-fp16-simd.s: New test source.
* testsuite/gas/arm/armv8-2-fp16-simd.d: New testcase for arm mode.
* testsuite/gas/arm/armv8-2-fp16-simd-thumb.d: Likewise for thumb mode.
* testsuite/gas/arm/armv8-2-fp16-simd-warning.d: New rejection test for
arm mode.
* testsuite/gas/arm/armv8-2-fp16-simd-warning-thumb.d: Likewise for
thumb mode.
* testsuite/gas/arm/armv8-2-fp16-simd-warning.l: New expected rejection
error file.
opcode/
* arm-dis.c (neon_opcodes): Support new FP16 instructions.
* read.c (emit_expr_with_reloc): Add code check a bignum with
nbytes == 1.
* config/rx/rx-parse.y (rx_intop): Accept bignum values for sizes
other than 32-bits.
* testsuite/gas/elf/bignum.s: New test source file.
* testsuite/gas/elf/bignum.d: New test driver file.
* testsuite/gas/elf/elf.exp: Run the new test.
gcc 4.7 complains about variables that shadow function names, which now happens
in tc-arm.c because there is a global function do_align (), and local variables
do_align. The simplest fix for this seems to be to rename those variables to
do_alignment.
gas/ChangeLog:
2016-03-09 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-arm.c (neon_alignment_bit): Rename do_align to
do_alignment.
(do_neon_ld_st_lane): Likewise.
(do_neon_ld_dup): Likewise.
bfd/
2016-03-08 Cupertino Miranda <Cupertino.Miranda@synopsys.com>
Andrew Burgess <andrew.burgess@embecosm.com>
* elf32-arc.c (arc_bfd_get_32): Becomes an alias for bfd_get_32.
(arc_bfd_put_32): Becomes an alias for bfd_put_32.
(arc_elf_howto_init): Added assert to validate relocations.
(get_middle_endian_relocation): Delete.
(middle_endian_convert): New function.
(ME): Redefine, now does nothing.
(IS_ME): New define.
(arc_do_relocation): Extend the attached 'ARC_RELOC_HOWTO'
definition to call middle_endian_convert. Add a new local
variable and make use of this throughout. Added call to
arc_bfd_get_8 and arc_bfd_put_8 for 8 bit relocations.
gas/
2016-03-08 Andrew Burgess <andrew.burgess@embecosm.com>
* testsuite/gas/arc/inline-data-1.d: New file.
* testsuite/gas/arc/inline-data-1.s: New file.
include/
2016-03-08 Cupertino Miranda <Cupertino.Miranda@synopsys.com>
Andrew Burgess <andrew.burgess@embecosm.com>
* elf/arc-reloc.def: Add a call to ME within the formula for each
relocation that requires middle-endian correction.
bfd/
2016-02-29 Cupertino Miranda <Cupertino.Miranda@synopsys.com>
* elf32-arc.c (arc_elf_final_write_processing): Add condition to
the flag change.
(elf_arc_relocate_section): Fixes and conditions to support PIE.
Assert for code sections dynamic relocs.
gas/
2016-02-29 Claudiu Zissulescu <Claudiu.Zissulescu@synopsys.com>
* config/tc-arc.c: Enable code density instructions for ARC EM.
ld/
2016-02-29 Cupertino Miranda <Cupertino.Miranda@synopsys.com>
* scripttempl/arclinux.sc: Force .tdata and .tbss to always be
generated.
Some gas tests are excluded for arc targets using the pattern arc-*-*,
however this only covers little endian arc targets. This commit extends
the patter to cover big endian arc targets, the pattern is now arc*-*-*.
gas/ChangeLog:
* testsuite/gas/all/gas.exp: Change target pattern to cover
arceb-*.
* testsuite/gas/all/redef3.d: Likewise.
* testsuite/gas/elf/elf.exp: Likewise.
opcodes/
2016-02-24 Renlin Li <renlin.li@arm.com>
* arm-dis.c (print_insn_coprocessor): Check co-processor number for
cpd/cpd2, mcr/mcr2, mrc/mrc2, ldc/ldc2, stc/stc2.
gas/
2016-02-24 Renlin Li <renlin.li@arm.com>
* testsuite/gas/arm/copro.s: Use coprocessor other than 10, 11.
* testsuite/gas/arm/copro.d: Update.
There is no need to set BFD compression bits for each section. We
should just set it once in write_object_file.
* write.c (compress_debug): Move BFD compression bits setting
to ...
(write_object_file): Here.
Increment register number by 16 if RegVRex is set.
* config/tc-i386.c (register_number): Check RegVRex.
* testsuite/gas/i386/x86-64-avx512f.s: Add a test for vgatherqpd
with %zmm19 and %zmm3.
* testsuite/gas/i386/x86-64-avx512f-intel.d: Updated.
* testsuite/gas/i386/x86-64-avx512f.d: Likewise.
* symbols.c (decode_local_label_name): Make type a const char *.
* listing.c (print_source): Make type of p const char *.
(print_line): Make type of string const char *.
(buffer_line): Return const char *.
(title): Make type const char *.
(subtitle): Likewise.
(listing_listing): Make type of p const char *.
* messages.c (as_internal_value_out_of_range): Make type of prefix
const char *.
* stabs.c (s_stab_generic): make type of stab_secname, stabstr_secname
and string const char *.
* read.c (_bfd_rel): Make type of name const char *.
* app.c (out_string): Change type to const char *.
(struct app_save::out_string): Likewise.
gas * read.c (finish_bundle): Avoid recording a negative alignment.
(do_align): Use unsigned values for n, len and max. Only create
a frag if the alignment requirement is greater than the minimum
byte alignment. Avoid recording a negative alignment.
(s_align): Use unsigned values where appropriate.
(bss_alloc): Use an unsigned value for the alignment.
(sizeof_sleb128): Add a comment noting that we encode one octet
per byte, regardless of the value of OCTETS_PER_BYTE_POWER.
(emit_leb129_expr): Abort if the emitted encoding was longer than
expected.
* read.h (output_leb128): Update prototype.
(sizeof_leb128): Update prototype.
(bss_alloc): Update prototype.
* write.c (record_alignment): Use an unsigned value for the
alignment. Do not record alignments less than the minimum
alignment for a byte.
* write.h (record_alignment): Update prototype.
Despite the documentation and the comment in xtensa_move_literals, in
the presence of --text-section-literals and --auto-litpools literals are
moved from the separate literal sections into .init and .fini, because
the check in the xtensa_move_literals is incorrect.
This moving was broken with introduction of auto litpools: some literals
now may be lost. This happens because literal frags emitted from .init
and .fini are not closed when new .literal_position marks new literal
pool. Then frag_align(2, 0, 0) changes type of the last literal frag to
rs_align. rs_align frags are skipped in the xtensa_move_literals. As a
result fixups against such literals are not moved out of .init.literal/
.fini.literal sections producing the following assembler error:
test.S: Warning: fixes not all moved from .init.literal
test.S: Internal error!
Fix check for .init.literal/.fini.literal in the xtensa_move_literals
and don't let it move literals from there in the presence of
--text-section-literals or --auto-litpools.
2016-02-17 Max Filippov <jcmvbkbc@gmail.com>
gas/
* config/tc-xtensa.c (xtensa_move_literals): Fix check for
.init.literal/.fini.literal section name.
* testsuite/gas/xtensa/all.exp: Add init-fini-literals to the
list of xtensa tests.
* testsuite/gas/xtensa/init-fini-literals.d: New file:
init-fini-literals test result patterns.
* testsuite/gas/xtensa/init-fini-literals.s: New file:
init-fini-literals test.
In AArch64 gas, register name or string starts with valid register name
is not allowed as symbol name for mov[z,k,n] instruction.
This patch removes the restriction.
gas/
PR gas/19620
* config/tc-aarch64.c (parse_half): Remove restrictions on symbol name.
* testsuite/gas/aarch64/movw_label.d: New.
* testsuite/gas/aarch64/movw_label.s: New.
gas * doc/as.texinfo (.section): Document that numeric values can now
be used for the flags and type fields of the ELF target's .section
directive. Add notes about the restrictions on setting flags and
types.
* config/obj-elf.c (obj_elf_change_section): Allow known sections
to be given processor specific section types. Allow processor and
application specific flags of a section to be set after
definition.
(obj_elf_parse_section_letters): Handle parsing numeric values.
(obj_elf_section_type): Handle parsing numeric values.
(obj_elf_section): Allow numeric type values.
* config/obj-elf.h (obj_elf_change_section): Update prototype.
* testsuite/gas/elf/section10.d: New test.
* testsuite/gas/elf/section10.s: Source file for new test.
* testsuite/gas/elf/elf.exp: Run the new test.
* testsuite/gas/i386/ilp32/x86-64-unwind.d: Remove dependency upon
the description of the flags produced by readelf.
* testsuite/gas/tic6x/scomm-directive-4.d: Likewise.
* NEWS: Mention the new feature.
bfd * elf-bfd.h (struct bfd_elf_special_section): Use unsigned values
for length and type fields. Use a signed value for the
suffix_length field.
binutils* readelf.c (get_section_type_name): Add hex prefix to offsets
printed for LOPROC and LOOS values. Ensure that a result is
always returned for the V850 target, even when an unrecognised
processor specific value is encountered.
(process_section_headers): Display key values in the order in
which they appear to the user. Add the "C (compressed)" value to
the list.
ld * testsuite/ld-i386/pr12718.d: Remove dependency upon the
description of the flags produced by readelf.
* testsuite/ld-i386/pr12921.d: Likewise.
* testsuite/ld-i386/tlsbin-nacl.rd: Likewise.
* testsuite/ld-i386/tlsbin.rd: Likewise.
* testsuite/ld-i386/tlsbindesc-nacl.rd: Likewise.
* testsuite/ld-i386/tlsbindesc.rd: Likewise.
* testsuite/ld-i386/tlsdesc-nacl.rd: Likewise.
* testsuite/ld-i386/tlsdesc.rd: Likewise.
* testsuite/ld-i386/tlsgdesc-nacl.rd: Likewise.
* testsuite/ld-i386/tlsgdesc.rd: Likewise.
* testsuite/ld-i386/tlsnopic-nacl.rd: Likewise.
* testsuite/ld-i386/tlsnopic.rd: Likewise.
* testsuite/ld-i386/tlspic-nacl.rd: Likewise.
* testsuite/ld-i386/tlspic.rd: Likewise.
* testsuite/ld-s390/tlsbin.rd: Likewise.
* testsuite/ld-s390/tlsbin_64.rd: Likewise.
* testsuite/ld-s390/tlspic.rd: Likewise.
* testsuite/ld-s390/tlspic_64.rd: Likewise.
* testsuite/ld-sh/tlsbin-2.d: Likewise.
* testsuite/ld-sh/tlspic-2.d: Likewise.
* testsuite/ld-tic6x/common.d: Likewise.
* testsuite/ld-tic6x/shlib-1.rd: Likewise.
* testsuite/ld-tic6x/shlib-1b.rd: Likewise.
* testsuite/ld-tic6x/shlib-1r.rd: Likewise.
* testsuite/ld-tic6x/shlib-1rb.rd: Likewise.
* testsuite/ld-tic6x/shlib-app-1.rd: Likewise.
* testsuite/ld-tic6x/shlib-app-1b.rd: Likewise.
* testsuite/ld-tic6x/shlib-app-1r.rd: Likewise.
* testsuite/ld-tic6x/shlib-app-1rb.rd: Likewise.
* testsuite/ld-tic6x/shlib-noindex.rd: Likewise.
* testsuite/ld-tic6x/static-app-1.rd: Likewise.
* testsuite/ld-tic6x/static-app-1b.rd: Likewise.
* testsuite/ld-tic6x/static-app-1r.rd: Likewise.
* testsuite/ld-tic6x/static-app-1rb.rd: Likewise.
* testsuite/ld-x86-64/ilp32-4-nacl.d: Likewise.
* testsuite/ld-x86-64/ilp32-4.d: Likewise.
* testsuite/ld-x86-64/pr12718.d: Likewise.
* testsuite/ld-x86-64/pr12921.d: Likewise.
* testsuite/ld-x86-64/split-by-file-nacl.rd: Likewise.
* testsuite/ld-x86-64/split-by-file.rd: Likewise.
* testsuite/ld-x86-64/tlsbin-nacl.rd: Likewise.
* testsuite/ld-x86-64/tlsbin.rd: Likewise.
* testsuite/ld-x86-64/tlsbindesc-nacl.rd: Likewise.
* testsuite/ld-x86-64/tlsbindesc.rd: Likewise.
* testsuite/ld-x86-64/tlsdesc-nacl.rd: Likewise.
* testsuite/ld-x86-64/tlsdesc.rd: Likewise.
* testsuite/ld-x86-64/tlsgdesc-nacl.rd: Likewise.
* testsuite/ld-x86-64/tlsgdesc.rd: Likewise.
* testsuite/ld-x86-64/tlspic-nacl.rd: Likewise.
* testsuite/ld-x86-64/tlspic.rd: Likewise.
* testsuite/ld-xtensa/tlsbin.rd: Likewise.
* testsuite/ld-xtensa/tlspic.rd: Likewise.
PR gas/19614
* dw2gencfi.c (cfi_sections_set): Delay setting this variable
until it is actually used.
(cfi_set_sections): Set cfi_sections_set to true.
(dot_cfi_startproc): Likewise.
(dot_cfi_endproc): Likewise.
(dot_cfi_fde_data): Likewise.
(cfi_finish): Likewise.
(dot_cfi_sections): Do not set cfi_sections_set.
* doc/as.texinfo (.cfi_sections): Note that targets can provide
their own cfi section name. Also note that the directive can be
reissued provided that CFI generation has not started.
* testsuite/gas/mips/compact-eh-err2.s: Add .cfi_startproc and
.cfi_endproc directives so that the redefinition of .cfi_sections
will trigger the generation of the error message.
* testsuite/gas/mips/compact-eh-err2.l: Update expected line
number of error message.
PR target/19561
opcdoe * msp430-dis.c (print_insn_msp430): Add a special case for
decoding an RRC instruction with the ZC bit set in the extension
word.
include * opcode/msp430.h (IGNORE_CARRY_BIT): New define.
(RRUX): Synthesise using case 2 rather than 7.
gas * config/tc-msp430.c (msp430_operands): Remove case 7. Use case 2
to handle encoding of RRUX instruction.
* testsuite/gas/msp430/msp430x.s: Add more tests of the extended
shift instructions.
* testsuite/gas/msp430/msp430x.d: Update expected disassembly.
Change 1058c7532d "Use signed data type for R_XTENSA_DIFF* relocation
offsets." changed signedness of BFD_RELOC_XTENSA_DIFF* relocations
substituted for BFD_RELOC_*. This made it impossible to encode arbitrary
8-, 16- and 32-bit values, which broke e.g. debug info encoding by .loc
directive. Revert this part and add test.
gas/
2016-02-03 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (md_apply_fix): Mark BFD_RELOC_XTENSA_DIFF*
substitutions for BFD_RELOC_* as unsigned.
* gas/testsuite/gas/xtensa/all.exp: Add loc to list of xtensa
tests.
* gas/testsuite/gas/xtensa/loc.d: New file: loc test result
patterns.
* gas/testsuite/gas/xtensa/loc.s: New file: loc test.
This change makes gas's notion of the msp430 dwarf2 address size match
that of gcc and gdb. This is needed so that the format of addresses
generated for DW_LNE_set_address in .debug_line will match the address
size for the compilation unit.
In gcc/config/msp430/msp430.h, it's set to 4:
#define DWARF2_ADDR_SIZE 4
Likewise in gdb/msp430-tdep.c:
set_gdbarch_dwarf2_addr_size (gdbarch, 4);
(As far as I can tell, however, GDB doesn't use this value when decoding
.debug_line. Instead, GDB uses the Pointer Size from the compilation
unit.)
readelf is able to seamlessly handle mismatches between these various
sizes by using the size of the DW_LNE_set_address instruction to
determine the address size. Another way to fix this problem is to
make GDB behave in a similar manner. In my opinion, GDB should detect
and inform the user about these mismatches; it's not clear to me if
it's correct for GDB to go ahead and read the address anyway when a
size mismatch is detected.
Without this change, addresses in .debug_line are encoded in two bytes
for some multilibs. When GDB reads the address for
DW_LNE_set_address, it uses the pointer size provided by the CU. When
these values don't match, GDB reads the wrong number of bytes. In the
cases that I've looked at, GDB is reading 4 bytes from a 2 byte
container, which results in a garbage address. GDB discards lines
which have a bogus address; the end result is that GDB records no line
number information for CUs which have a mismatch between the address
size (from the CU) and the format of the address used by
DW_LNE_set_address.
gas/ChangeLog:
* config/tc-msp430.h (DWARF2_ADDR_SIZE): Set to 4.
Basic all instructions assembler test, auto-generated by CGEN, then
fixed by hand for some cases where CGEN had generated invalid
instruction operands.
gas/ChangeLog:
* testsuite/gas/ip2k/allinsn.d: New file.
* testsuite/gas/ip2k/allinsn.s: New file.
* testsuite/gas/ip2k/ip2k-allinsn.exp: New file.
In commit 02a79b89fd some of the load
instructions with a zero offset (where the offset is not mentioned) were
marked as NO-DIS, meaning that the disassembler must display the offset,
even though it is zero.
This change seems a little strange to me as it was only applied to some
loads, not all, and the same change was not applied to the stores.
However, I'm reluctant to revert a specific change to the assembler,
when the output is obviously correct. With this commit then I simply
bring the expected assembler test results into line with what is
actually produced.
gas/ChangeLog:
* testsuite/gas/epiphany/addr-syntax.d: Add explicit 0 offset to
some load instructions.
* testsuite/gas/epiphany/allinsn.d: Likewise.
* testsuite/gas/epiphany/regression.d: Likewise.
In commit 02a79b89fd all instruction
aliases that have a '.l' suffix were marked as NO-DIS, so the
disassembler will not display them, in preference to the instruction
without the suffix. However, the gas testsuite was not updated at the
time, this commit fixes that oversight.
gas/ChangeLog:
* testsuite/gas/epiphany/addr-syntax.d: Remove unneeded '.l'
suffixes from instruction mnemonics in expected output.
* testsuite/gas/epiphany/allinsn.d: Likewise.
* testsuite/gas/epiphany/regression.d: Likewise.
* testsuite/gas/epiphany/sample.d: Likewise.
In commit 02a79b89fd the register aliases
sb, sl, and ip were made less preferred than r9, r10, and r12, however,
the expected test results were not updated. This commit fixes this
oversight and updates the test results.
gas/ChangeLog:
* testsuite/gas/epiphany/addr-syntax.d: Update expected register
names.
* testsuite/gas/epiphany/allinsn.d: Likewise.
* testsuite/gas/epiphany/sample.d: Likewise.
Always set the bytes_per_line field (of struct disassemble_info) to the
same constant value, this is inline with the advice contained within
include/dis-asm.h.
Setting this field to a constant value will cause the disassembler
output to be better aligned.
cpu/ChangeLog:
* epiphany.opc (epiphany_print_insn): Set info->bytes_per_line to
a constant to better align disassembler output.
opcodes/ChangeLog:
* epiphany-dis.c: Regenerated from latest cpu files.
gas/ChangeLog:
* testsuite/gas/epiphany/sample.d: Update expected output.
Use OPTION_MXXX for -mxxx option in x86 assembler.
* config/tc-i386.c (OPTION_OMIT_LOCK_PREFIX): Renamed to ...
(OPTION_MOMIT_LOCK_PREFIX): This.
(md_longopts): Updated.
(md_parse_option): Likewise.
In the instruction to write to the ARMv8.2 PSTATE field UAO,
MSR UAO, #<imm>, the immediate should be either 0 or 1 but GAS accepts
any unsigned 4-bit integer.
This patch implements the constraint on the immediate, generating an
error if the immediate operand is invalid, and adds tests for the
illegal forms.
opcodes/
2016-01-20 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (operand_general_constraint_met_p): Check validity
of MSR UAO immediate operand.
gas/
2016-01-20 Matthew Wahab <matthew.wahab@arm.com>
* testsuite/gas/aarch64/armv8_2-a-illegal.d: New.
* testsuite/gas/aarch64/armv8_2-a-illegal.l: New.
* testsuite/gas/aarch64/armv8_2-a-illegal.s: New.
Change-Id: Ibdec4967c00b1ef3be9dbc43d23b2c70d1a0b28c
bfd/ChangeLog:
* elf32-arm.c ((elf32_arm_special_sections): Remove catch of noread
section using '.text.noread' pattern.
gas/ChangeLog:
* config/obj-elf.c (obj_elf_change_section) : Allow arm section with
SHF_ARM_NOREAD section flag.
* config/tc-arm.h (md_elf_section_letter) : Implement this hook to
handle letter 'y'.
(arm_elf_section_letter) : Declare it.
* config/tc-arm.c (arm_elf_section_letter): Handle letter 'y' to set
SHF_ARM_NOREAD section flag.
* doc/c-arm.texi (ARM section attribute 'y'): Document it.
gas/testsuite/ChangeLog:
* gas/arm/section-execute-only.s: New test case.
* gas/arm/section-execute-only.d: Expected output.
ld/testsuite/ChangeLog:
* ld-arm/thumb1-noread-not-present-mixing-two-section.s: Add 'y'
attribute usage.
* ld-arm/thumb1-noread-present-one-section.s: Likewise.
* ld-arm/thumb1-noread-present-two-section.s: Likewise.
* ld-arm/thumb1-input-section-flag-match.s: Likewise.
binutils/ChangeLog:
* readelf.c (get_elf_section_flags): Display y letter for section
with SHF_ARM_NOREAD section flag in readelf section output.
(process_section_headers): Add y letter in readelf section output
key mapping for ARM architecture.
The POOL48A major opcode was defined in early revisions of the 64-bit
microMIPS ISA, has never been implemented, and was removed before the
64-bit microMIPS ISA specification[1] has been finalized.
This complements commit a6c7053929 ("MIPS/opcodes: Remove microMIPS
48-bit LI instruction").
References:
[1] "MIPS Architecture for Programmers, Volume II-B: The microMIPS64
Instruction Set", MIPS Technologies, Inc., Document Number: MD00594,
Revision 3.06, October 17, 2012, Table 6.2 "microMIPS64 Encoding of
Major Opcode Field", p. 578
gas/
* config/tc-mips.c (micromips_insn_length): Remove the mention
of 48-bit microMIPS instructions.
gdb/
* mips-tdep.c (mips_insn_size): Remove 48-bit microMIPS
instruction support.
(micromips_next_pc): Likewise.
(micromips_scan_prologue): Likewise.
(micromips_deal_with_atomic_sequence): Likewise.
(micromips_stack_frame_destroyed_p): Likewise.
(mips_breakpoint_from_pc): Likewise.
opcodes/
* mips-dis.c (print_insn_micromips): Remove 48-bit microMIPS
instruction support.
Oddly, config.sub converts a duple ending in -elf for these target to
-unknown-none, which means they aren't seen as elf targets by
binutils. So, counter that. This exposes a number of testsuite
issues (ones you would have seen if configuring with a full triple,
say m68hc11-unknown-elf).
binutils/
* testsuite/lib/binutils-common.exp (is_elf_format): Return true
for m68hc11/12 and xgate triples.
gas/
* testsuite/gas/cfi/cfi.exp: Exclude m68hc11/12 from m68k test.
ld/
* testsuite/lib/ld-lib.exp (check_shared_lib_support): Exclude xgate.
* testsuite/ld-elf/endsym.d: xfail m68hc11/12 and xgate.
* testsuite/ld-elf/pr14156a.d: Likewise.
* testsuite/ld-elf/pr14926.d: Don't run for m68hc11/12 and xgate.
* testsuite/ld-elf/sec64k.exp: Likewise.
* rl78-decode.opc (rl78_decode_opcode): Add 's' operand to movw
instructions that can support stack pointer operations.
* rl78-decode.c: Regenerate.
* rl78-dis.c: Fix display of stack pointer in MOVW based
instructions.
* testsuite/gas/rl78/sp-relative-movw.s: New test.
* testsuite/gas/rl78/sp-relative-movw.d: Expected disassembly.
* testsuite/gas/rl78/rl78.exp: Run the new test.
Some of the RAS system registers added to binutils as part of the ARMv8.2
support are missing the feature checks to warn when they aren't
supported by the target.
This patch adds the missing feature checks with a test to check that
the correct warnings are given for all the ARMv8.2 system registers.
gas/
2016-01-14 Matthew Wahab <matthew.wahab@arm.com>
* testsuite/gas/aarch64/illegal-sysreg-2.l: New.
* testsuite/gas/aarch64/illegal-sysreg-2.d: New.
opcodes/
2016-01-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (aarch64_sys_reg_supported_p): Merge conditionals
testing for RAS support. Add checks for erxfr_el1, erxctlr_el1,
erxtatus_el1 and erxaddr_el1.
Change-Id: I66b590ea49c1eb6b0e5c93e0dc2bc9c4e79a52fe
Fix:
cc1: warnings being treated as errors
.../gas/config/tc-nios2.c: In function 'output_movia':
.../gas/config/tc-nios2.c:3474: warning: 'code' may be used uninitialized in this function
make[4]: *** [tc-nios2.o] Error 1
seen with GCC 4.1.2 and 4.4.7.
gas/
* config/tc-nios2.c (output_movia): Preset `code' to 0.
The ARMv8.2 architecture includes the RAS extension which adds an
instruction, ESB, and a number of coprocessor registers. This patch adds
the instruction to binutils, making it available when -march=armv8.2-a
is selected. It also adds tests for the instruction and for the
coprocessor registers.
gas/
2016-01-12 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-arm.c (arm_ext_v8_2): New.
(insns): Add "esb".
* testsuite/gas/arm/armv8_2-a.d: New.
* testsuite/gas/arm/armv8_2-a.s: New.
opcodes/
2016-01-12 Matthew Wahab <matthew.wahab@arm.com>
* arm-dis.c (arm_opcodes): Add "esb".
(thumb_opcodes): Likewise.
Change-Id: I67f3d70789db78d1c66a56c4994675f99ac15e34
For ISA_B/C only the combination #,d(An) is allowed in addition to the
ISA_A combinations for move.b and move.w (and pc-relative is never
allowed as destination).
opcodes/
PR gas/13050
* m68k-opc.c (moveb, movew): For ISA_B/C only allow #,d(An) in
addition to ISA_A.
gas/
PR gas/13050
* testsuite/gas/m68k/all.exp: Add tests p13050-1 and p13050-2.
* testsuite/gas/m68k/p13050-1.s: New file.
* testsuite/gas/m68k/p13050-2.d: New file.
* testsuite/gas/m68k/p13050-2.s: New file.
The convention within for relocation names is that they start with the
string "R_", however, this is not so for ARC for the display names of
relocations, however, internally, the names for the relocations types do
have the 'R_' prefix. I suspect that the missing 'R_' on the output
strings was an oversight, as I can't see any comment to the contrary.
To bring ARC into line with other targets, this commit adds the 'R_'
prefix to the output strings used for relocation names, and updates all
of the assembler tests where this was exposed.
bfd/ChangeLog:
* elf32-arc.c (reloc_type_to_name): Change ARC_RELOC_HOWTO to
place 'R_' before the reloc name returned.
(elf_arc_howto_table): Change ARC_RELOC_HOWTO to place 'R_' before
the relocation string.
gas/ChangeLog:
* testsuite/gas/arc/adc.d: Add 'R_' prefix to relocation names.
* testsuite/gas/arc/add.d: Likewise.
* testsuite/gas/arc/and.d: Likewise.
* testsuite/gas/arc/asl.d: Likewise.
* testsuite/gas/arc/asr.d: Likewise.
* testsuite/gas/arc/bic.d: Likewise.
* testsuite/gas/arc/extb.d: Likewise.
* testsuite/gas/arc/extw.d: Likewise.
* testsuite/gas/arc/j.d: Likewise.
* testsuite/gas/arc/jl.d: Likewise.
* testsuite/gas/arc/ld2.d: Likewise.
* testsuite/gas/arc/lsr.d: Likewise.
* testsuite/gas/arc/mov.d: Likewise.
* testsuite/gas/arc/or.d: Likewise.
* testsuite/gas/arc/pcl-relocs.d: Likewise.
* testsuite/gas/arc/pcrel-relocs.d: Likewise.
* testsuite/gas/arc/pic-relocs.d: Likewise.
* testsuite/gas/arc/plt-relocs.d: Likewise.
* testsuite/gas/arc/rlc.d: Likewise.
* testsuite/gas/arc/ror.d: Likewise.
* testsuite/gas/arc/rrc.d: Likewise.
* testsuite/gas/arc/sbc.d: Likewise.
* testsuite/gas/arc/sda-relocs.d: Likewise.
* testsuite/gas/arc/sda-relocs2.d: Likewise.
* testsuite/gas/arc/sexb.d: Likewise.
* testsuite/gas/arc/sexw.d: Likewise.
* testsuite/gas/arc/st.d: Likewise.
* testsuite/gas/arc/sub.d: Likewise.
* testsuite/gas/arc/tls-relocs.d: Likewise.
* testsuite/gas/arc/xor.d: Likewise.
2015-12-24 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
(tag_cpu_arch_combine): Adjust comment in v4t_plus_v6_m with regards
to merging with ARMv8-M Baseline.
binutils/
* readelf.c (arm_attr_tag_CPU_arch): Add ARMv8-M Baseline Tag_CPU_arch
value.
gas/
* config/tc-arm.c (arm_ext_v6t2_v8m): New feature for instructions
shared between ARMv6T2 and ARMv8-M.
(move_or_literal_pool): Check mov.w/mvn and movw availability against
arm_ext_v6t2 and arm_ext_v6t2_v8m respectively instead of checking
arm_arch_t2.
(do_t_branch): Error out for wide conditional branch instructions if
targetting ARMv8-M Baseline.
(non_v6t2_wide_only_insn): Add the logic for new wide-only instructions
in ARMv8-M Baseline.
(wide_insn_ok): New function.
(md_assemble): Use wide_insn_ok instead of non_v6t2_wide_only_insn and
adapt error message for unsupported wide instruction to ARMv8-M
Baseline.
(insns): Reorganize instructions shared by ARMv8-M Baseline and
ARMv6t2 architecture.
(arm_cpus): Set feature bit ARM_EXT2_V6T2_V8M for marvell-pj4 and
marvell-whitney cores.
(arm_archs): Define armv8-m.base architecture.
(cpu_arch_ver): Define ARM_ARCH_V8M_BASE architecture version.
(aeabi_set_public_attributes): Add logic to set Tag_CPU_arch to 17 for
ARMv8-M Mainline. Set Tag_DIV_use for ARMv8-M Baseline as well.
gas/testsuite/
* gas/arm/archv8m-base.d: New file.
* gas/arm/attr-march-armv8m.base.d: Likewise.
* gas/arm/armv8m.base-idiv.d: Likewise.
* gas/arm/any-armv8m.d: Adapt to deal with ARMv8-M Baseline.
include/elf/
* arm.h (TAG_CPU_ARCH_V8M_BASE): Declare.
include/opcode/
* arm.h (ARM_EXT2_V6T2_V8M): New extension bit.
(ARM_AEXT2_V8A): New architecture extension bitfield.
(ARM_AEXT2_V8_1A): Use ARM_AEXT2_V8A instead of ARM_EXT2_ATOMICS.
(ARM_AEXT_V8M_BASE): New architecture extension bitfield.
(ARM_AEXT2_V8M): Add extension bit ARM_EXT2_V6T2_V8M.
(ARM_ARCH_V6T2): Use ARM_EXT2_V6T2_V8M for the second extension
bitfield.
(ARM_ARCH_V6KT2): Likewise.
(ARM_ARCH_V6ZT2): Likewise.
(ARM_ARCH_V6KZT2): Likewise.
(ARM_ARCH_V7): Likewise.
(ARM_ARCH_V7A): Likewise.
(ARM_ARCH_V7VE): Likewise.
(ARM_ARCH_V7R): Likewise.
(ARM_ARCH_V7M): Likewise.
(ARM_ARCH_V7EM): Likewise.
(ARM_ARCH_V8A): Likewise.
(ARM_ARCH_V8M_BASE): New architecture bitfield.
(ARM_ARCH_THUMB2): Include instructions shared by ARMv6t2 and ARMv8-M.
(ARM_ARCH_V7A_SEC): Use ARM_EXT2_V6T2_V8M for the second extension
bitfield and reindent.
(ARM_ARCH_V7A_MP_SEC): Likewise.
(ARM_ARCH_V7R_IDIV): Likewise.
(ARM_ARCH_V8A_FP): Use ARM_AEXT2_V8A instead of ARM_EXT2_ATOMICS.
(ARM_ARCH_V8A_SIMD): Likewise.
(ARM_ARCH_V8A_CRYPTOV1): Likewise.
opcodes/
* arm-dis.c (arm_opcodes): Guard movw, movt cbz, cbnz, clrex, ldrex,
ldrexb, ldrexh, strex, strexb, strexh shared by ARMv6T2 and ARMv8-M by
ARM_EXT2_V6T2_V8M instead of ARM_EXT_V6T2.
2015-12-24 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
(tag_cpu_arch_combine): Adjust v4t_plus_v6_m and comb array to account
for new TAG_CPU_ARCH_V4T_PLUS_V6_M value. Deal with NULL values in
comb array.
binutils/
* readelf.c (arm_attr_tag_CPU_arch): Add ARMv8-M Mainline Tag_CPU_arch
value.
(arm_attr_tag_THUMB_ISA_use): Add ARMv8-M Mainline Tag_THUMB_ISA_use
value.
gas/
* config/tc-arm.c (arm_ext_m): Include ARMv8-M.
(arm_ext_v8m): New feature for ARMv8-M.
(arm_ext_atomics): New feature for ARMv8 atomics.
(do_tt): New encoding function for TT* instructions.
(insns): Add new entries for ARMv8-M specific instructions and
reorganize the ones shared by ARMv8-M Mainline and ARMv8-A.
(arm_archs): Define armv8-m.main architecture.
(cpu_arch_ver): Define ARM_ARCH_V8M_MAIN architecture version and
clarify the ordering rule.
(aeabi_set_public_attributes): Use TAG_CPU_ARCH_* macro to refer to
Tag_CPU_arch values for ARMv7e-M detection. Add logic to keep setting
Tag_CPU_arch to ARMv8-A for -march=all. Also set Tag_CPU_arch_profile
to 'A' if extension bit for atomic instructions is set, unless it is
ARMv8-M. Set Tag_THUMB_ISA_use to 3 for ARMv8-M. Set Tag_DIV_use to 0
for ARMv8-M Mainline.
gas/testsuite/
* gas/arm/archv8m.s: New file.
* gas/arm/archv8m-main.d: Likewise.
* gas/arm/attr-march-armv8m.main.d: Likewise.
* gas/arm/any-armv8m.s: Likewise.
* gas/arm/any-armv8m.d: Likewise.
include/elf/
* arm.h (TAG_CPU_ARCH_V8M_MAIN): Declare.
(MAX_TAG_CPU_ARCH): Define to TAG_CPU_ARCH_V8M_MAIN.
(TAG_CPU_ARCH_V4T_PLUS_V6_M): Define to unused value 15.
include/opcode/
* arm.h (ARM_EXT2_ATOMICS): New extension bit.
(ARM_EXT2_V8M): Likewise.
(ARM_EXT_V8): Adjust comment with regards to atomics and remove
mention of legacy use for that bit.
(ARM_AEXT2_V8_1A): New architecture extension bitfield.
(ARM_AEXT2_V8_2A): Likewise.
(ARM_AEXT_V8M_MAIN): Likewise.
(ARM_AEXT2_V8M): Likewise.
(ARM_ARCH_V8A): Use ARM_EXT2_ATOMICS for features in second bitfield.
(ARM_ARCH_V8_1A): Likewise with ARM_AEXT2_V8_1A.
(ARM_ARCH_V8_2A): Likewise with ARM_AEXT2_V8_2A.
(ARM_ARCH_V8M_MAIN): New architecture feature bitfield.
(ARM_ARCH_V8A_FP): Use ARM_EXT2_ATOMICS for features in second bitfield
and reindent.
(ARM_ARCH_V8A_SIMD): Likewise.
(ARM_ARCH_V8A_CRYPTOV1): Likewise.
(ARM_ARCH_V8_1A_FP): Use ARM_AEXT2_V8_1A to set second bitfield of
feature bits.
(ARM_ARCH_V8_1A_SIMD): Likewise.
(ARM_ARCH_V8_1A_CRYPTOV1): Likewise.
opcodes/
* arm-dis.c (arm_opcodes): Guard lda, ldab, ldaex, ldaexb, ldaexh, stl,
stlb, stlh, stlex, stlexb and stlexh by ARM_EXT2_ATOMICS instead of
ARM_EXT_V8.
(thumb32_opcodes): Add entries for wide ARMv8-M instructions.
2015-12-24 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (move_or_literal_pool): Check mov.w, mvm and movw
availability against arm_ext_v6t2 instead of checking arm_arch_t2,
fixing comments along the way.
(handle_it_state): Check arm_ext_v6t2 instead of arm_arch_t2 to
generate IT instruction.
(t1_isa_t32_only_insn): New function.
(md_assemble): Use above new function to check for invalid wide
instruction for CPU Thumb ISA and to determine what Thumb extension
bit is necessary for that instruction.
(md_apply_fix): Use arm_ext_v6t2 instead of arm_arch_t2 to decide if
branch is out of range.
include/opcode/
* arm.h (ARM_ARCH_THUMB2): Add comment explaining its meaning and
remove extension bit not including any Thumb-2 instruction.
PR gas/19386
* doc/as.texinfo (Strings): Prepend a space to index entries that
start with a backslash. This works around a problem in the pdf
generator.
We only need to store 32-bit immediate in 64-bit and optimize 64-bit
displacement to 32-bit only for 64-bit BFD.
* config/tc-i386.c (optimize_imm): Store 32-bit immediate in
64-bit only for 64-bit BFD
(optimize_disp): Optimize 64-bit displacement to 32-bit only
for 64-bit BFD.
There is currently a problem in the way in which we produce
build attributes for simple assembler files that have armv8-a
instructions.
In these case we need to generate TAG_ISA_THUMB_Use to be Thumb-2
and set the architecture profile to be 'A' rather than not
setting architecture profile to be 'A' and setting TAG_ISA_THUMB_Use
to be Thumb-1.
This is a pre-requisite for any v8-m patches that have been posted.
arm-none-eabi gas testsuite run. no regressions.
2015-12-17 Ramana Radhakrishnan <ramana.radhakrishnan@arm.com>
* gas/config/tc-arm.c (aeabi_set_public_attributes): Adjust
TAG_ARCH_profile for armv8-a.
* gas/testsuite/gas/arm/armv8a-automatic-hlt.d: New test.
* gas/testsuite/gas/arm/armv8a-automatic-hlt.s: New test.
* gas/testsuite/gas/arm/armv8a-automatic-lda.d: New test.
* gas/testsuite/gas/arm/armv8a-automatic-lda.s: New test.
2015-12-16 Mickael Guene <mickael.guene@st.com>
bfd/
* bfd-in2.h: Regenerate.
* reloc.c: Add new relocations.
* libbfd.h (bfd_reloc_code_real_names): Add new relocations
display names.
* elf32-arm.c (elf32_arm_howto_table_1): Add HOWTO for new
relocations.
(elf32_arm_reloc_map): Add bfd/arm mapping for new relocations.
(elf32_arm_final_link_relocate): Implement new relocations
resolution.
gas/
* doc/c-arm.texi: Add documentation about new directives
* config/tc-arm.c (group_reloc_table): Add mapping between gas
syntax and new relocations.
(do_t_add_sub): Keep new relocations for add operand.
(do_t_mov_cmp): Keep new relocations for mov operand.
(insns): Use 'shifter operand with possible group relocation'
operand parse code for movs operand.
(md_apply_fix): Implement mov and add encoding when new
relocations on them.
(tc_gen_reloc): Add new relocations.
(arm_fix_adjustable): Since offset has a limited range ([0:255])
we disable adjust_reloc_syms() for new relocations.
gas/testsuite/
* gas/arm/adds-thumb1-reloc-local.d: New
* gas/arm/adds-thumb1-reloc-local.s: New
* gas/arm/movs-thumb1-reloc-local.d: New
* gas/arm/movs-thumb1-reloc-local.s: New
include/
* elf/arm.h: Add new arm relocations.
ld/testsuite/
* ld-arm/arm-elf.exp (armelftests_common): Add new relocations
tests.
* ld-arm/thumb1-adds.d: New
* ld-arm/thumb1-adds.s: New
* ld-arm/thumb1-movs.d: New
* ld-arm/thumb1-movs.s: New
To support thumb1 execute-only code we need to support four new
relocations (R_ARM_THM_ALU_ABS_G0_NC, R_ARM_THM_ALU_ABS_G1_NC,
R_ARM_THM_ALU_ABS_G2_NC and R_ARM_THM_ALU_ABS_G3_NC).
These relocations allow the static linker to finalize construction
of symbol address.
Typical sequence of code to get address of the symbol foo is then
the following :
movs r3, #:upper8_15:#foo
lsls r3, #8
adds r3, #:upper0_7:#foo
lsls r3, #8
adds r3, #:lower8_15:#foo
lsls r3, #8
adds r3, #:lower0_7:#foo
This will give following sequence of text and relocations after
assembly :
4: 2300 movs r3, #0
4: R_ARM_THM_ALU_ABS_G3_NC foo
6: 021b lsls r3, r3, #8
8: 3300 adds r3, #0
8: R_ARM_THM_ALU_ABS_G2_NC foo
a: 021b lsls r3, r3, #8
c: 3300 adds r3, #0
c: R_ARM_THM_ALU_ABS_G1_NC foo
e: 021b lsls r3, r3, #8
10: 3300 adds r3, #0
10: R_ARM_THM_ALU_ABS_G0_NC foo
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch extends
instructions in the group Adv.SIMD Scalar Shift By Immediate to support
FP16, making this support available when +simd+fp16 is enabled.
The extended instructions are: SCVTF, FCVTZS, UCVTF and FCVTZU.
The general form for these instructions is
<OP> <Hd>, <Hs>, #<imm>
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16: Add tests for Adv.SIMD scalar shift
by immediate instructions.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (QL_SSHIFT_H): New.
(aarch64_opcode_table): Add fp16 versions of scvtf, fcvtzs, ucvtf
and fcvtzu to the Adv.SIMD scalar shift by immediate group.
Change-Id: I40506496f52dd96909e7344f243b38a1870df7ff
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch extends
instructions in the group Adv.SIMD Shift By Immediate to support FP16,
making this support available when +simd+fp16 is enabled.
The new instructions legal make some uses of the 4h vector type that had
been invalid. This patch adjusts a test that checks for these uses.
The extended instructions are: SCVTF, FCVTZS, UCVTF and FCVTZU.
The general form for these instructions is
<OP> <Vd>.<T>, <Vs>.<T>, #<imm>
where T is 4h or 8h.
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16.s: Add tests for Adv.SIMD across lanes
instructions.
* gas/aarch64/illegal.d: Update expected output.
* gas/aarch64/illegal.s: Replace tests for illegal use of 'h'
specifier.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (QL_VSHIFT_H): New.
(aarch64_opcode_table): Add fp16 versions of scvtf, fcvtzs, ucvtf
and fcvtzu to the Adv.SIMD shift by immediate group.
Change-Id: I3480f63883d54db46562573185da6982f2365ee8
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch adds FP16
instructions to the group Adv.SIMD Scalar Pairwise, making them
available when +simd+fp16 is enabled.
The instructions added are: FMAXNMP, FADDP, FMAXP, FMINNMP and FMINP
The general form for these instructions is
<OP> <Hd>, <V>.<T>
where T is 4h or 8h.
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16.s: Add tests for Adv.SIMD Scalar
Pairwise instructions.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (QL_SISD_PAIR_H): New.
(aarch64_opcode_table): Add fp16 versions of fmaxnmp, faddp,
fmaxp, fminnmp, fminp to the Adv.SIMD scalar pairwise group.
Change-Id: I19937ede3441b66dd0f940269ece895b17d3c345
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. The FP16 additions to the
scalar pairwise group introduce a new vector type, 2H. This patch adds
support for this vector type to binutils.
The patch adds a new operand qualifier to the enum
aarch64.h:aarch64_opnd_qualifier. This interferes with the calculation
used by aarch64-dis.c:get_vreg_qualifier_from_value, called when
decoding an instruction. Since the new vector type is only used in FP16
scalar pairwise instructions which do not require the function, this
patch adjusts the function to ignore the new qualifier.
gas/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (parse_neon_type_for_operand): Adjust to
take into account new vector type 2H.
(vectype_to_qualifier): Likewise.
include/opcode/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (enum aarch64_opnd_qualifier): Add
AARCH64_OPND_QLF_V_2H.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.coM>
* aarch64-dis.c (get_vreg_qualifier_from_value): Update comment
and adjust calculation to ignore qualifier for type 2H.
* aarch64-opc.c (aarch64_opnd_qualifier): Add "2H".
Change-Id: Idf9a3694732962c80fde04f08c7304de9164f126
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. The FP16 additions to the
scalar pairwise group introduce a new vector type. This patch reworks
code in the assembler to allow the addition of the new type.
The new vector type requires the addtion of a new operand qualifier to
the enum aarch64_opnd_qualifier which is defined
include/opcodes/aarch64.h, in the group prefixed by AARCH64_OPN_QLF_V_.
The correctness of the GAS utility function
tc-aarch64.c:vectype_to_qualifier is heavily dependent on the number and
ordering of this group. In particular, it makes assumptions about the
positions of the members of the group that are not true if a qualifier
for type 2H is added before the qualifier for 4H.
This patch reworks the function to weaken its assumptions, making it
calculate positions in the group from the type (B, H, S, D, Q) and
register width.
gas/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (vectype_to_qualifier): Calculate operand
qualifier from per-type base and offet.
Change-Id: I95535864e342a6dec46f69d2696b3900a008f0b1
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch adds an FP16
instruction to the group Adv.SIMD Modified Immediate, making it
available when +simd+fp16 is enabled.
The instruction added is: FMOV.
The form of this instructions is
<OP> <Hd>, #<imm>
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16.s: Add tests for Adv.SIMD modified immediate
instructions.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (QL_SIMD_IMM_H): New.
(aarch64_opcode_table): Add fp16 version of fmov to the Adv.SIMD
modified immediate group.
Change-Id: Ic66af44c494e6a53fb1cf01c372cdc62d12643e2
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch adds FP16
instructions to the group Adv.SIMD Across Lanes, making them available
when +simd+fp16 is enabled.
The instructions added are: FMAXNMV, FMAXV, FMINNMV and FMINV.
The general form for these instructions is
<OP> <Hd>, <V>.<T>
where T is 4h or 8h.
The new instructions valid make uses of the 8H and 4H that were
previously illegal. The patch adjusts a test for illegal uses of vector
types to take this into account.
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16.s: Add tests for Adv.SIMD across lanes
instructions.
* gas/aarch64/illegal.d: Update expected output.
* gas/aarch64/illegal.s: Replace test for illegal use of 'h'
specifier.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (QL_XLANES_FP_H): New.
(aarch64_opcode_table): Add fp16 versions of fmaxnmv, fmaxv,
fminnmv, fminv to the Adv.SIMD across lanes group.
Change-Id: Ib9a47e867f55e0272c2446eb7e16837503d2f94c
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch adds FP16
instructions to the group Scalar Indexed Element, making them available
when +simd+fp16 is enabled.
The instructions added are: FMLA, FMLS, FMUL and FMULX.
The general form for these instructions is
<OP> <Hd>, <Hs>, <V>.h[<idx>]
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16.s: Add tests for scalar indexed element
instructions.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (aarch64_opcode_table): Add fp16 versions of fmla,
fmls, fmul and fmulx to the scalar indexed element group.
Change-Id: I6a4ee20a9ae1019b89d0fd05da55222f267c5627
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch adds FP16
instructions to the group Vector Indexed Element, making them available
when +simd+fp16 is enabled.
The instructions added are: FMLA, FMLS, FMUL and FMULX.
The general form for these instructions is
<OP> <V>.<T>, <V>.<T>, <V>.h[<idx>]
where T is 4h or 8h
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16.s: Add tests for vector indexed element
instructions.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (QL_ELEMENT_FP_H): New.
(aarch64_opcode_table): Add fp16 versions of fmla, fmls, fmul and
fmulx to the vector indexed element group.
Change-Id: Ib70cd4eaa6ea2938f84ac41f31d72644dbb0ceb4
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch adds FP16
instructions to the group Scalar Two Register Misc, making them
available when +simd+fp16 is enabled.
The instructions added are: FCMGT, FCMGE, FCMEQ, FCMLE, FCMLT, FCVTNS,
FCVTNU, FCVTPS, FCVTPU, FCVTMS, FCVTMU, FCVTZS, FCVTZU, FCVTAS, FCVTAU,
SCVTF, UCVTF, FRECPE, FRSQRTE and FRECPX.
The general form for these instructions is
<OP> <Hd>, <Hs>
or
<OP> <Hd>, <Hs>, #0.0
Tested the series for aarch64-none-linux-gnu with cross-compiled
check-binutils and check-gas.
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16.s: Add tests for scalar two register misc.
instructions.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (QL_SISD_FCMP_H_0): new.
(QL_S_2SAMEH): New.
(aarch64_opcode_table): Add fp16 versions of fcvtns, fcvtms,
fcvtas, scvtf, fcmgt, fcmeq, fcmlt, fcvtps, fcvtzs, frecpe,
frecpx, fcvtnu, fcvtmu, fcvtau, ucvtf, fcmge, fcmle, fcvtpu,
fcvtzu and frsqrte to the scalar two register misc. group.
Change-Id: I19b25baae33027ce1bade68cc8dc47a4321d045c
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch adds FP16
instructions to the group Vector Two Register Misc, making them
available when +simd+fp16 is enabled.
The instructions added are: FCMGT, FCMGE, FCMEQ, FCMLE, FCMLT, FABS,
FNEG, FRINTN, FRINTA, FRINTP, FRINTM, FRINTX, FRINTZ, FRINTI, FCVTNS,
FCVTNU, FCVTPS, FCVTPU, FCVTMS, FCVTMU, FCVTZS, FCVTZU, FCVTAS, FCVTAU,
SCVTF, UCVTF, FRECPE, FRSQRTE and FSQRT.
The general form for these instructions is
<OP> <Vd>.<T>, <Vs>.<T>
where T is 4h or 8h.
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16.s: Add tests for vector two register misc.
instructions.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (QL_V2SAMEH): New.
(aarch64_opcode_table): Add fp16 versions of frintn, frintm,
fcvtns, fcvtms, fcvtas, scvtf, fcmgt, fcmeq, fcmlt, fabs, frintp,
frintz, fcvtps, fcvtzs, frecpe, frinta, frintx, fcvtnu, fcvtmu,
fcvtau, ucvtf, fcmge, fcmle, fneg, frinti, fcvtpu, fcvtzu, frsqrte
and fsqrt to the vector register misc. group.
Change-Id: I0267511a7f7ea14247504d29fe4752e84c9af9ad
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch adds FP16
instructions to the group Scalar Three Register Same, making them
available when +simd+fp16 is enabled.
The instructions added are: FABD, FMULX, FCMEQ, FCMGE, FCMGT, FACGE,
FACGT, FRECPS and FRSQRTS.
The general form for these instructions is
<OP> <Hd>, <Hs>, <Hm>
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16.s: Add tests for scalar three register same
instructions.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (aarch64_opcode_table): Add fp16 versions of
fmulx, fcmeq, frecps, frsqrts, fcmge, facge, fabd, fcmgt and
facgt to the scalar three same group.
Change-Id: I155eb8d7c1e9a7c89d691d7e4aae83be51ff1238
ARMv8.2 adds 16-bit floating point operations as an optional extension
to floating point and Adv.SIMD support. This patch adds FP16
instructions to the group Vector Three Register Same, making them
available when +simd+fp16 is enabled.
The instructions added are: FMAXNM, FMAXNMP, FNMINNM, FMINNMP, FMLA,
FMLS, FADD, FADDP, FSUB, FABD, FMULX, FMUL, FCMEQ, FCMGE, FCMGT, FACGE,
FACGT, FMAX, FMAXP, FMIN, FMINP, FRECPS, FDIV and FRSQRTS.
The general form for these instructions is
<OP> <Vd>.<T>, <Vs>.<T>, <Vm>.<T>
where T is 4h or 8h.
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: New.
* gas/aarch64/advsimd-fp16.s: New.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (QL_V3SAMEH): New.
(aarch64_opcode_table): Add fp16 versions of fmaxnm, fmla, fadd,
fmulx, fcmeq, fmax, frecps, fminnm, fmls, fsub, fmin, frsqrts,
fmaxnmp, faddp, fmul, fcmge, facge, fmaxp, fdiv, fminnmp, fabd,
fcmgt, facgt and fminp to the vector three same group.
Change-Id: I3f1c5fe82ca73f7a17fe5329cf2b0de03c94328c
The Statistical Profile Extension adds the instruction PSB CSYNC as an
alias for the HINT #17 instruction. This patch adds the instruction to
binutils as a HINT alias that takes an operand.
A new operand type, AARCH64_OPND_BARRIER_PSB, is added to represent the
operand to PSB. A parser for the operand type is added to the assembler
and a printer to the disassembler. The operand name "csync" is added to
the list of HINT options with HINT number #17. Encoding and decoding of
the operand is handled by the ins_hint/ext_hint functions added in the
preceding patches.
gas/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (aarch64_hint_opt_hsh): New.
(parse_barrier_psb): New.
(parse_operands): Add case for AARCH64_OPND_BARRIER_PSB.
(md_begin): Set up aarch64_hint_opt_hsh.
gas/testsuite/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/system-2.d: Enable the statistical profiling
extension. Update the expected output.
* gas/aarch64/system-2.s: Add tests for PSB CSYNC.
* gas/aarch64/system.d: Update the expected output.
include/opcode/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (aarch64_opnd): Add AARCH64_OPND_BARRIER_PSB.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-opc.c (aarch64_hint_options): Add "csync".
(aarch64_print_operands): Handle AARCH64_OPND_BARRIER_PSB.
* aarch64-tbl.h (aarch64_feature_stat_profile): New.
(STAT_PROFILE): New.
(aarch64_opcode_table): Add "psb".
(AARCH64_OPERANDS): Add "BARRIER_PSB".
Change-Id: I5ffb672d26a8b15b48785478d359350a9b70ca09
The Statistical Profile extension included in the ARMv8.2 architecture
adds a number of system registers. This patch adds the registers to
binutils, making them available when the architecture extension
"+profile" is enabled.
opcodes/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (aarch64_sys_reg): Add pbmlimitr_el1, pmbptr_el1,
pmbsr_el1, pmbidr_el1, pmscr_el1, pmsicr_el1, pmsirr_el1,
pmsfcr_el1, pmsevfr_el1, pmslatfr_el1, pmsidr_el1, pmscr_el2 and
pmscr_el2.
(aarch64_sys_reg_supported_p): Add architecture feature tests for
the new registers.
gas/testsuite/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/sysreg-2.s: Add tests for the statistical profiling
system registers.
* gas/aarch64/sysreg-2.d: Enable the statistical profiling
extension and update the expected output.
Change-Id: Ibf23ad34db7c33f0fcd30010b796748b38be6efb
The Statistical Profile extension included in the ARMv8.2 architecture
adds a number of system registers and a new instruction. This patch set
adds support for the extension to binutils, enabled when
-march=armv8.2-a+profile is given.
The patches in this series:
- Add the new command line option and feature flags.
- Add the new system registers.
- Adjust the maximum number of aliases permitted for an instruction.
- Add support for HINT aliases which take operands.
- Add the new instruction, an alias of the HINT instruction.
This patch adds the option "profile" to the permitted architecture
extensions, disabling it by default.
gas/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (aarch64_features): Add "profile".
* doc/c-aarch64.texi (AArch64 Extensions): Add "profile".
include/opcode/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (AARCH64_FEATURE_PROFILE): New.
Change-Id: If9bb4a9b69a264180f96f8ffaf10b15ced273699
ARMv8.2 adds new instructions AT S1E1RP and AT S1E1WP to Aarch64. This
patch adds support for the instructions, making them available when
-march=armv8.2-a is selected.
gas/testsuite/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/sysreg-2.d: Update for new tests for AT S1E1RP and
AT S1E1WP.
* gas/aarch64/sysreg-2.s: Add tests for AT S1E1RP and AT S1E1WP.
opcodes/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (aarch64_sys_regs_at): Add "s1e1rp" and "s1e1wp".
(aarch64_sys_ins_reg_supported_p): Add ARMv8.2 system register
feature test for "s1e1rp" and "s1e1wp".
Change-Id: I09e1044b629ab0a34b03c423e8d4e71ff92daad4
ARMv8.2 adds the new system instruction DC CVAP. This patch adds support
for the instruction to binutils, enabled when -march=armv8.2-a is
selected.
gas/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (parse_sys_ins_reg): Add check of
architectural support for system register.
gas/testsuite/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/sysreg-2.d: Add tests for dc instruction.
* gas/aarch64/sysreg-2.s: Add uses of dc instruction.
include/opcode/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (aarch64_sys_ins_reg_supported_p): Declare.
opcodes/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (aarch64_sys_regs_dc): Add "cvap".
(aarch64_sys_ins_reg_supported_p): New.
Change-Id: I3158b97d9bbee9644c2d0e2986db807412ef1053
ARMv8.2 adds a new control bit PSTATE.UAO. This patch adds support for
this bit to binutils, following the same basic pattern as for
PSTATE.PAN. The new control bit is only available when -march=armv8.2-a
is specified.
gas/testsuite/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/uao-directive.d: New.
* gas/aarch64/uao.d: New.
* gas/aarch64/uao.s: New.
opcodes/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (aarch64_sys_regs): Add "uao".
(aarch64_sys_reg_supported_p): Add comment. Add checks for "uao".
(aarch64_pstatefields): Add "uao".
(aarch64_pstatefield_supported_p): Add checks for "uao".
Change-Id: Id571628ac5227b78aaf1876e85d15d7b6c0a2896
gas/ChangeLog:
2015-12-10 Jose E. Marchesi <jose.marchesi@oracle.com>
* doc/c-sparc.texi (Sparc-Regs): Document the %dN and %qN notation
for floating-point registers.
The ARMv8.2 RAS extension adds a number of new registers. This patch
adds the registers and makes them available whenever the RAS extension
is enabled, as it is when -march=armv8.2-a is selected.
The new registers are:
erridr_el1, errselr_el1, erxfr_el1, erxctlr, erxaddr_el1,
erxmisc0_el1, erxmisc1_el1, vsesr_el2, disr_el1 and
vdisr_el2.
gas/testsuite/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/sysreg-2.d: Add tests for new registers.
* gas/aarch64/sysreg-2.s: Likewise. Also replace some spaces with
tabs.
opcodes/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (aarch64_sys_regs): Add "vsesr_el2", "erridr_el1",
"errselr_el1", "erxfr_el1", "erxctlr", "erxaddr_el1",
"erxmisc0_el1", "erxmisc1_el1", "disr_el1" and "vdisr_el2".
(aarch64_sys_reg_supported_p): Add architecture feature tests for
new registers.
Change-Id: I8a01a0f0ee7987f89eead32650f6afcc749b3c74
The ARMv8.2 RAS extension adds a new barrier instruction ESB as an alias
and the preferred form of HINT 16.
This patch adds an architectural feature flag for the RAS extension and
includes it in the features selected enabled by -march=armv8.2-a. It
also adds the ESB instruction, making it available whenever the RAS
feature is enabled.
Because ESB is the preferred form and because the target architecture
isn't available to the disassembler, HINT 16 will be disassembled as ESB
even when the target has no support for the RAS extension.
gas/testsuite/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/system-2.d: New.
* gas/aarch64/system-2.s: New.
* gas/aarch64/system.d: Adjust expected output for HINT 16.
include/opcode/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (AARCH64_FEATURE_RAS): New.
(AARCH64_ARCH_V8_2): Add AARCH64_FEATURE_RAS.
opcodes/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-tbl.h (aarch64_feature_ras): New.
(RAS): New.
(aarch64_opcode_table): Add "esb".
Change-Id: Id4713917da15cca3b977284f43febd1c9b3d9faf
ARMv8.1 includes CRC as a required extension but this isn't reflected in
the features enabled by -march=armv8.1-a. The FP16 feature modifier also
clashes with AARCH64_FEATURE_V8_1 and the list of features for ARMv8.2
is missing ARMv8.1 features.
This patch enables +crc for -march values of armv8.1-a and later. It
also fixes the values for AARCH64_FEATURE_F16 and makes
AARCH64_ARCH_V8_2 and superset of AARCH64_ARCH_V8_2.
gas/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* doc/c-aarch64.texi (AArch64 Extensions): Update entry for crc.
include/opcode
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (AARCH64_FEATURE_F16): Fix clash with
AARCH64_FEATURE_V8_1.
(AARCH64_ARCH_V8_1): Add AARCH64_FEATURE_CRC.
(AARCH64_ARCH_V8_2): Add AARCH64_FEATURE_CRC and
AARCH64_FEATURE_V8_1.
Change-Id: I8af5369f6df2430b28f6cec92870d2a4d14a7431
There's a set of legacy command line arguments that the arc assembler
still accepts, however, these arguments not longer have any effect on
the assembler.
Currently we return false from md_parse_option for all of these
arguments, with the result that the assembler terminates with an error
message.
We should return true indicating that the argument has been accepted,
even though we ignore it.
gas/ChangeLog:
* config/tc-arc.c (md_parse_option): Return 1 in order to accept
dummy arguments.
The SPARC Refence Manual documents the %dN and %qN syntax to
refer to double and quad-precision floating-point registers,
respectively. See OSA2015 Appendix C, Assembly Language Syntax,
C1.1 Register Names.
This patch adds support for these names to GAS. This eases the
porting of software from Solaris to GNU/Linux, as these register
names have been supported by the Solaris linker for a long time
and many assembler require that support.
gas/ChangeLog:
2015-12-09 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c (sparc_ip): Support %dN and %qN notation for
double and quad-precision floating-point registers.
While not allowed, this certainly shouldn't result in confusing the
programmer (by skipping lines in unexpected ways): Without returning,
demand_empty_rest_of_line() (at the end of the function) will demand
the _next_ line to be empty, and without the conditional we would
ignore the next line.
Claudiu Zissulescu
Jiong Wang
H.J. Lu
Andrew Burgess
Alan Modra
Trevor Saunders
Nick Clifton
Jose E. Marchesi
Trevor Saunders
Ulrich Drepper
Mickael Guene
Thomas Preud'homme
Matthew Wahab
Joel Sherrill
Renlin Li
Kyrylo Tkachov
Dan Gisselquist
Max Filippov
Vinay Kumar G
Kevin Buettner
Loria
Andrew Senkevich
Catherine Moore
Maciej W. Rozycki
Yoshinori Sato
Peter Bergner
Andreas Schwab
Ramana Radhakrishnan
Christophe Lyon
Jan Beulich