gas/
PR gas/23954
* config/tc-riscv.c (my_getSmallExpression): Expand comment for
register support. Set expr_end if parse a register.
(riscv_ip) <'u'>: Break if imm_expr is not a symbol or constant.
* testsuite/gas/riscv/auipc-parsing.d: New.
* testsuite/gas/riscv/auipc-parsing.l: New.
* testsuite/gas/riscv/auipc-parsing.s: New.
Put back BFD_RELOC_X86_64_GOTPCREL in TC_FORCE_RELOCATION_LOCAL, which
was removed by
commit 56ceb5b540
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Thu Oct 22 04:49:20 2015 -0700
Add R_X86_64_[REX_]GOTPCRELX support to gas and ld
by accident.
PR gas/23956
gas/
* config/tc-riscv.c (validate_riscv_insn) <'1'>: New case.
(percent_op_null): New.
(riscv_ip) <'j'>: Set imm_reloc before p.
<'1'>: New case.
<'0'>: Use percent_op_null and don't set imm_reloc.
<alu_op>: Handle *args == '1'.
* testsuite/gas/riscv/tprel-add.d: New.
* testsuite/gas/riscv/tprel-add.l: New.
* testsuite/gas/riscv/tprel-add.s: New.
opcodes/
* riscv-opc.c (riscv_opcodes) <"add">: Use 1 not 0 for fourth arg.
This patch started off just adding the warnings in tc-ppc.c about
incorrect usage of @l, @h and @ha in instructions that don't have
16-bit D-form fields. That unfortunately showed up three warnings in
ld/testsuite/ld-powerpc/vle-multiseg.s on instructions like
e_li r3, IV_table@l+0x00
which was being assembled to
8: 70 60 00 00 e_li r3,0
a: R_PPC_ADDR16_LO IV_table
The ADDR16_LO reloc is of course completely bogus on e_li, which has
a split 20-bit signed integer field in bits 0x1f7fff, the low 11 bit
in 0x7ff, the next 5 bits in 0x1f0000, and the high 4 bits in 0x7800.
Applying an ADDR16_LO reloc to the instruction potentially changes
the e_li instruction to e_add2i., e_add2is, e_cmp16i, e_mull2i,
e_cmpl16i, e_cmph16i, e_cmphl16i, e_or2i, e_and2i., e_or2is, e_lis,
e_and2is, or some invalid encodings.
Now there is a relocation that suits e_li, R_PPC_VLE_ADDR20, which was
added 2017-09-05 but I can't see code in gas to generate the
relocation. In any case, VLE_ADDR20 probably doesn't have the correct
semantics for @l since ideally you'd want an @l to pair with @h or @ha
to generate a 32-bit constant. Thus @l should only produce a 16-bit
value, I think. So we need some more relocations to handle e_li it
seems, or as I do in this patch, modify the behaviour of existing
relocations when applied to e_li instructions.
include/
* opcode/ppc.h (E_OPCODE_MASK, E_LI_MASK, E_LI_INSN): Define.
bfd/
* elf32-ppc.c (ppc_elf_howto_raw <R_PPC_VLE_ADDR20>): Correct
mask and shift value.
(ppc_elf_vle_split16): Use E_OPCODE_MASK. Handle e_li
specially.
gas/
* config/tc-ppc.c (md_assemble): Adjust relocs for VLE before
TLS tweaks. Handle e_li. Warn on unexpected operand field
for lo16/hi16/ha16 relocs.
The RISC-V assembler generates fake labels with the name '.L0 ' as
part of the debug information (see
gas/config/tc-riscv.h:FAKE_LABEL_NAME).
The problem is that currently, when disassembling an object file, the
output looks like this (this is an example from the GDB testsuite, but
is pretty representative of anything with debug information):
000000000000001e <main>:
1e: 7179 addi sp,sp,-48
20: f406 sd ra,40(sp)
22: f022 sd s0,32(sp)
24: 1800 addi s0,sp,48
0000000000000026 <.L0 >:
26: 87aa mv a5,a0
28: feb43023 sd a1,-32(s0)
2c: fcc43c23 sd a2,-40(s0)
30: fef42623 sw a5,-20(s0)
0000000000000034 <.L0 >:
34: fec42783 lw a5,-20(s0)
38: 0007871b sext.w a4,a5
3c: 678d lui a5,0x3
3e: 03978793 addi a5,a5,57 # 3039 <.LASF30+0x2a9d>
42: 02f71463 bne a4,a5,6a <.L0 >
0000000000000046 <.L0 >:
46: 000007b7 lui a5,0x0
4a: 0007b783 ld a5,0(a5) # 0 <need_malloc>
4e: 6f9c ld a5,24(a5)
0000000000000050 <.L0 >:
50: 86be mv a3,a5
52: 466d li a2,27
54: 4585 li a1,1
56: 000007b7 lui a5,0x0
5a: 00078513 mv a0,a5
5e: 00000097 auipc ra,0x0
62: 000080e7 jalr ra # 5e <.L0 +0xe>
0000000000000066 <.L0 >:
66: 4785 li a5,1
68: a869 j 102 <.L0 >
000000000000006a <.L0 >:
6a: 000007b7 lui a5,0x0
6e: 00078513 mv a0,a5
72: 00000097 auipc ra,0x0
76: 000080e7 jalr ra # 72 <.L0 +0x8>
The frequent repeated '.L0 ' labels are pointless, as they are
non-unique there's no way to match a use of '.L0 ' to its appearence
in the output, so we'd be better off just not printing it at all.
That's what this patch does by defining a 'symbol_is_valid' method for
RISC-V. With this commit, the same disassembly now looks like this:
000000000000001e <main>:
1e: 7179 addi sp,sp,-48
20: f406 sd ra,40(sp)
22: f022 sd s0,32(sp)
24: 1800 addi s0,sp,48
26: 87aa mv a5,a0
28: feb43023 sd a1,-32(s0)
2c: fcc43c23 sd a2,-40(s0)
30: fef42623 sw a5,-20(s0)
34: fec42783 lw a5,-20(s0)
38: 0007871b sext.w a4,a5
3c: 678d lui a5,0x3
3e: 03978793 addi a5,a5,57 # 3039 <.LASF30+0x2a9d>
42: 02f71463 bne a4,a5,6a <.L4>
46: 000007b7 lui a5,0x0
4a: 0007b783 ld a5,0(a5) # 0 <need_malloc>
4e: 6f9c ld a5,24(a5)
50: 86be mv a3,a5
52: 466d li a2,27
54: 4585 li a1,1
56: 000007b7 lui a5,0x0
5a: 00078513 mv a0,a5
5e: 00000097 auipc ra,0x0
62: 000080e7 jalr ra # 5e <main+0x40>
66: 4785 li a5,1
68: a869 j 102 <.L5>
000000000000006a <.L4>:
6a: 000007b7 lui a5,0x0
6e: 00078513 mv a0,a5
72: 00000097 auipc ra,0x0
76: 000080e7 jalr ra # 72 <.L4+0x8>
In order to share the fake label between the assembler and the
libopcodes library, I've added some new defines RISCV_FAKE_LABEL_NAME
and RISCV_FAKE_LABEL_CHAR in include/opcode/riscv.h. I could have
just moved FAKE_LABEL_NAME to the include file, however, I thnk this
would be confusing, someone working on the assembler would likely not
expect to find FAKE_LABEL_NAME defined outside of the assembler source
tree. By introducing the RISCV_FAKE_LABEL_* defines I can leave the
assembler standard FAKE_LABEL_ defines in the assembler source, but
still share the RISCV_FAKE_LABEL_* with libopcodes.
gas/ChangeLog:
* config/tc-riscv.h (FAKE_LABEL_NAME): Define as
RISCV_FAKE_LABEL_NAME.
(FAKE_LABEL_CHAR): Define as RISCV_FAKE_LABEL_CHAR.
include/ChangeLog:
* dis-asm.h (riscv_symbol_is_valid): Declare.
* opcode/riscv.h (RISCV_FAKE_LABEL_NAME): Define.
(RISCV_FAKE_LABEL_CHAR): Define.
opcodes/ChangeLog:
* disassembler.c (disassemble_init_for_target): Add RISC-V
initialisation.
* riscv-dis.c (riscv_symbol_is_valid): New function.
Armv8.3-A has another key used in pointer authentication called the
B-key (other than the A-key that is already supported). In order for
stack unwinders to work it is necessary to be able to identify frames
that have been signed with the B-key rather than the A-key and it was
felt that keeping this as an augmentation character in the CIE was the
best bet. The DWARF extensions for ARM therefore propose to add a new
augmentation character 'B' to the CIE augmentation string and the
corresponding cfi directive ".cfi_b_key_frame". I've made the relevant
changes to GAS and LD to add support for B-key unwinding, which required
modifying LD to check for 'B' in the augmentation string, adding the
".cfi_b_key_frame" directive to GAS and adding a "pauth_key" field to
GAS's fde_entry and cie_entry structs.
The pointer authentication instructions will behave as NOPs on
architectures that don't support them, and so a check for the
architecture being assembled for is not necessary since there will be no
behavioural difference between augmentation strings with and without the
'B' character on such architectures.
2018-12-05 Sam Tebbs <sam.tebbs@arm.com>
bfd/
* elf-eh-frame.c (_bfd_elf_parse_eh_frame): Add check for 'B'.
gas/
* dw2gencfi.c (struct cie_entry): Add tc_cie_entry_extras invocation.
(alloc_fde_entry): Add tc_fde_entry_init_extra invocation.
(output_cie): Add tc_output_cie_extra invocation.
(select_cie_for_fde): Add tc_cie_fde_equivalent_extra and
tc_cie_entry_init_extra invocation.
(frch_cfi_data, cfa_save_data): Move to dwgencfi.h.
* config/tc-aarch64.c (s_aarch64_cfi_b_key_frame): Declare.
(md_pseudo_table): Add "cfi_b_key_frame".
* config/tc-aarch64.h (tc_fde_entry_extras, tc_cie_entry_extras,
tc_fde_entry_init_extra, tc_output_cie_extra,
tc_cie_fde_equivalent_extra, tc_cie_entry_init_extra): Define.
* dw2gencfi.h (struct fde_entry): Add tc_fde_entry_extras invocation.
(pointer_auth_key): Define.
(frch_cfi_data, cfa_save_data): Move from dwgencfi.c.
* doc/c-aarch64.texi (.cfi_b_key_frame): Add documentation.
* testsuite/gas/aarch64/(pac_ab_key.d, pac_ab_key.s): New file.
ARM Architecture Reference Manual for the profile ARMv8-A, Issue C.a,
states that MOV (register) is an alias of the ORR (shifted register)
iff shift == '00' && imm6 == '000000' && Rn == '11111'. However, mov
is currently preferred for a broader range of orr instructions, which
is incorrect.
2018-12-03 Egeyar Bagcioglu <egeyar.bagcioglu@oracle.com>
opcodes:
PR 23193
PR 19721
* aarch64-tbl.h (aarch64_opcode_table): Only disassemble an ORR
encoding as MOV if the shift operation is a left shift of zero.
gas:
PR 23193
PR 19721
* testsuite/gas/aarch64/pr19721.s: Add new test cases.
* testsuite/gas/aarch64/pr19721.d: Correct existing test
cases and add new ones.
This removes ineffectual and wrong code caching section names in
gas/stabs.c. Code like
seg = subseg_new (name, 0);
...
if (seg->name == name)
seg->name = xstrdup (name);
with the idea of being able to unconditionally free "name" later no
longer works. "name" is referenced by the section hash table as well
as in the section->name field. It would be possible to use
"bfd_rename_section (stdoutput, seg, xstrdup (name))", but instead I
opted for a fairly straight-forward approach of adding extra
parameters to two functions to indicate section name strings should be
freed if possible.
PR 23938
* read.h (get_stab_string_offset): Update prototype.
* stabs.c (get_stab_string_offset): Add free_stabstr_secname
parameter. Free stabstr_secname if unused as section name.
Don't xstrdup name when used.
(s_stab_generic): Remove forward declaration. Add
stab_secname_obstack_end param. Reference notes obstack via
macros. Delete cached_secname. Adjust get_stab_string_offset
call. Free stab_secname if unused as section name.
(s_stab): Adjust s_stab_generic call.
(s_xstab): Likewise. Delete saved_secname and saved_strsecname.
* config/obj-elf.c (obj_elf_init_stab_section): Adjust
get_stab_string_offset call.
* config/obj-coff.c (obj_coff_init_stab_section): Likewise.
* config/obj-som.c (obj_som_init_stab_section): Likewise.
* testsuite/gas/all/pr23938.s: New test.
* testsuite/gas/all/gas.exp: Run it.
`-march=r5900' already enables the R5900 short loop workaround.
However, the R5900 ISA and most other MIPS ISAs are mutually
exclusive since R5900-specific instructions are generated as well.
The `-mfix-r5900' option can be used in combination with e.g.
`-mips2' or `-mips3' to generate generic MIPS binaries that also
work with the R5900 target.
This change has been tested with `make RUNTESTFLAGS=mips.exp
check-gas' for the targets `mipsr5900el-unknown-linux-gnu',
`mipsr5900el-elf' and `mips3-unknown-linux-gnu'.
gas/
* config/tc-mips.c (mips_fix_r5900, mips_fix_r5900_explicit):
New variables.
(options): Add OPTION_FIX_R5900 and OPTION_NO_FIX_R5900
enumeration constants.
(md_longopts): Add "mfix-r5900" and "mno-fix-r5900" options.
(can_swap_branch_p, md_parse_option, mips_after_parse_args):
Handle the new options.
(md_show_usage): Document the `-mfix-r5900' option.
* doc/as.texi: Likewise.
* doc/c-mips.texi: Likewise.
* testsuite/gas/mips/mips.exp: Run R5900 dump tests.
* testsuite/gas/mips/r5900-fix.d: Test `-mfix-r5900' option.
* testsuite/gas/mips/r5900-fix.s: Likewise.
* testsuite/gas/mips/r5900-no-fix.d: Test `-mno-fix-r5900'.
* testsuite/gas/mips/r5900-no-fix.s: Likewise.
Shift and rotate instructions when the number of bit positions
was an immediate value greater than 1 were incorrectly disassembled.
This change fixes that problem and extends the test to check for
it.
gas/ChangeLog:
testsuite/gas/s12z/shift.s: Add new test case.
testsuite/gas/s12z/shift.d: Add expected result.
opcodes/ChangeLog:
s12z-dis.c (print_insn_shift) [SB_REG_REG_N]: Enter special case
if the postbyte matches the appropriate pattern.
These are documented by NXP as alternative mnemonics for BCC and BCS
respectively.
gas/ChangeLog:
* config/tc-s12z.c (opcodes): bhs, blo: New members.
* testsuite/gas/s12z/bra.d: Add tests for aliases.
* testsuite/gas/s12z/bra.s: Add tests for aliases.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch adds all the data cache instructions that are part of this
extension:
- DC IGVAC, Xt
- DC IGSW, Xt
- DC CGSW, Xt
- DC CIGSW, Xt
- DC CGVAC, Xt
- DC CGVAP, Xt
- DC CGVADP, Xt
- DC CIGVAC, Xt
- DC GVA, Xt
- DC IGDVAC, Xt
- DC IGDSW, Xt
- DC CGDSW, Xt
- DC CIGDSW, Xt
- DC CGDVAC, Xt
- DC CGDVAP, Xt
- DC CGDVADP, Xt
- DC CIGDVAC, Xt
- DC GZVA, Xt
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (aarch64_sys_regs_dc): New entries for
IGVAC, IGSW, CGSW, CIGSW, CGVAC, CGVAP, CGVADP, CIGVAC, GVA,
IGDVAC, IGDSW, CGDSW, CIGDSW, CGDVAC, CGDVAP, CGDVADP,
CIGDVAC and GZVA.
(aarch64_sys_ins_reg_supported_p): New check for above.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/sysreg-4.s: Test IGVAC, IGSW,
CGSW, CIGSW, CGVAC, CGVAP, CGVADP, CIGVAC, GVA,
IGDVAC, IGDSW, CGDSW, CIGDSW, CGDVAC, CGDVAP, CGDVADP,
CIGDVAC and GZVA with DC.
* testsuite/gas/aarch64/sysreg-4.d: Likewise.
* testsuite/gas/aarch64/illegal-sysreg-4.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch adds all the system registers that are part of this
extension and are accessible via the MRS/MSR instructions:
- TCO
- TFSRE0_SL1
- TFSR_EL1
- TFSR_EL2
- TFSR_EL3
- TFSR_EL12
- RGSR_EL1
- GCR_EL1
TCO is also accessible with the MSR(immediate) instruction.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (aarch64_sys_regs): New entries for TCO,
TFSRE0_SL1, TFSR_EL1, TFSR_EL2, TFSR_EL3, TFSR_EL12,
RGSR_EL1 and GCR_EL1.
(aarch64_sys_reg_supported_p): New check for above.
(aarch64_pstatefields): New entry for TCO.
(aarch64_pstatefield_supported_p): New check for above.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/sysreg-4.s: Test TCO, TFSRE0_SL1,
TFSR_EL1, TFSR_EL2, TFSR_EL3, TFSR_EL12, RGSR_EL1 and
GCR_EL1 MSR and MRS.
* testsuite/gas/aarch64/sysreg-4.d: Likewise.
* testsuite/gas/aarch64/illegal-sysreg-4.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch add support to the Bulk Allocation Tag instructions from
MTE. These are the following instructions added in this patch:
- LDGV <Xt>, [<Xn|SP>]!
- STGV <Xt>, [<Xn|SP>]!
This needed a new kind of operand for the new addressing [<Xn|SP>]!
since this has no offset and only takes a pre-indexed version.
Hence AARCH64_OPND_ADDR_SIMPLE_2 and ldtdgv_indexed are introduced.
(AARCH64_OPND_ADDR_SIMPLE fulfilled the no offset criteria but does
not allow writeback). We also needed new encoding and decoding
functions to be able to do the same.
where
<Xt> : Is the 64-bit destination GPR.
<Xn|SP> : Is the 64-bit first source GPR or Stack pointer.
*** include/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (aarch64_opnd): Add AARCH64_OPND_ADDR_SIMPLE_2.
(aarch64_insn_class): Add ldstgv_indexed.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-asm.c (aarch64_ins_addr_simple_2): New.
* aarch64-asm.h (ins_addr_simple_2): Declare the above.
* aarch64-dis.c (aarch64_ext_addr_simple_2): New.
* aarch64-dis.h (ext_addr_simple_2): Declare the above.
* aarch64-opc.c (operand_general_constraint_met_p): Add case for
AARCH64_OPND_ADDR_SIMPLE_2 and ldstgv_indexed.
(aarch64_print_operand): Add case for AARCH64_OPND_ADDR_SIMPLE_2.
* aarch64-tbl.h (aarch64_opcode_table): Add stgv and ldgv.
(AARCH64_OPERANDS): Define ADDR_SIMPLE_2.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_operands): Add switch case for
AARCH64_OPND_ADDR_SIMPLE_2 and allow [base]! for it.
(warn_unpredictable_ldst): Exempt ldstgv_indexed for ldgv.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Add tests for ldgv and stgv.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch add support to the Tag Getting instruction from Memory Tagging
Extension.
- LDG <Xt>, [<Xn|SP>, #<simm>]
where
<Xt> : Is the 64-bit destination GPR.
<Xn|SP> : Is the 64-bit first source GPR or Stack pointer.
<simm> : Is the optional signed immediate offset, a multiple of 16
in the range of -4096 and 4080, defaulting to 0.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (QL_LDG): New.
(aarch64_opcode_table): Add ldg.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Add tests for ldg.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch add support to the Tag setting instructions from
MTE which consists of the following instructions:
- STG [<Xn|SP>, #<simm>]
- STG [<Xn|SP>, #<simm>]!
- STG [<Xn|SP>], #<simm>
- STZG [<Xn|SP>, #<simm>]
- STZG [<Xn|SP>, #<simm>]!
- STZG [<Xn|SP>], #<simm>
- ST2G [<Xn|SP>, #<simm>]
- ST2G [<Xn|SP>, #<simm>]!
- ST2G [<Xn|SP>], #<simm>
- STZ2G [<Xn|SP>, #<simm>]
- STZ2G [<Xn|SP>, #<simm>]!
- STZ2G [<Xn|SP>], #<simm>
- STGP <Xt>, <Xt2>, [<Xn|SP>, #<imm>]
- STGP <Xt>, <Xt2>, [<Xn|SP>, #<imm>]!
- STGP <Xt>, <Xt2>, [<Xn|SP>], #<imm>
where
<Xn|SP> : Is the 64-bit GPR or Stack pointer.
<simm> : Is the optional signed immediate offset, a multiple of 16
in the range -4096 to 4080, defaulting to 0.
*** include/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (aarch64_opnd): Add AARCH64_OPND_ADDR_SIMM11
and AARCH64_OPND_ADDR_SIMM13.
(aarch64_opnd_qualifier): Add new AARCH64_OPND_QLF_imm_tag.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (aarch64_opnd_qualifiers): Add new data
for AARCH64_OPND_QLF_imm_tag.
(operand_general_constraint_met_p): Add case for
AARCH64_OPND_ADDR_SIMM11 and AARCH64_OPND_ADDR_SIMM13.
(aarch64_print_operand): Likewise.
* aarch64-tbl.h (QL_LDST_AT, QL_STGP): New.
(aarch64_opcode_table): Add stg, stzg, st2g, stz2g and stgp
for both offset and pre/post indexed versions.
(AARCH64_OPERANDS): Define ADDR_SIMM11 and ADDR_SIMM13.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_operands): Add switch case for
AARCH64_OPND_ADDR_SIMM11 and AARCH64_OPND_ADDR_SIMM13.
(fix_insn): Likewise.
(warn_unpredictable_ldst): Exempt STGP.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Add tests for stg, st2g,
stzg, stz2g and stgp.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch add support to the Pointer Arithmetic instructions from
MTE. These are the following instructions added in this patch:
- SUBP <Xd>, <Xn|SP>, <Xm|SP>
- SUBPS <Xd>, <Xn|SP>, <Xm|SP>
- CMPP <Xn|SP>, <Xm|SP>
where CMPP is an alias to SUBPS XZR, <Xn|SP>, <Xm|SP>
where
<Xd> : Is the 64-bit destination GPR.
<Xn|SP> : Is the 64-bit first source GPR or Stack pointer.
<Xm|SP> : Is the 64-bit second source GPR or Stack pointer.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (aarch64_opcode_table): Add subp, subps and cmpp.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Add tests for subp,
subps and cmpp.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch add support to the Tag generation instructions from
MTE. These are the following instructions added in this patch:
- IRG <Xd|SP>, <Xn|SP>{, Xm}
- ADDG <Xd|SP>, <Xn|SP>, #<uimm1>. #<uimm2>
- SUBG <Xd|SP>, <Xn|SP>, #<uimm1>. #<uimm2>
- GMI <Xd>, <Xn|SP>, <Xm>
where
<Xd|SP> : Is the 64-bit destination GPR or Stack pointer.
<Xn|SP> : Is the 64-bit source GPR or Stack pointer.
<uimm6> : Is the unsigned immediate, a multiple of 16
in the range 0 to 1008.
<uimm4> : Is the unsigned immediate, in the range 0 to 15.
*** include/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (aarch64_opnd): Add
AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10 as new enums.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.h (aarch64_field_kind): New FLD_imm4_3.
(OPD_F_SHIFT_BY_4, operand_need_shift_by_four): New.
* aarch64-opc.c (fields): Add entry for imm4_3.
(operand_general_constraint_met_p): Add cases for
AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10.
(aarch64_print_operand): Likewise.
* aarch64-tbl.h (QL_ADDG): New.
(aarch64_opcode_table): Add addg, subg, irg and gmi.
(AARCH64_OPERANDS): Define UIMM4_ADDG and UIMM10.
* aarch64-asm.c (aarch64_ins_imm): Add case for
operand_need_shift_by_four.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_operands): Add switch case for
AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: New.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
* testsuite/gas/aarch64/illegal-memtag.d: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions. Memory Tagging Extension is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch adds the new command line option and the new feature macros.
*** include/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_MEMTAG): New.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (aarch64_feature_memtag): New.
(MEMTAG, MEMTAG_INSN): New.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_features): Add "memtag"
as a new option.
* doc/c-aarch64.texi: Document the same.
Instructions having an optional argument following a memory address
operand were not handled correctly if the optional argument was not
specified.
gas/ChangeLog:
2018-11-09 Andreas Krebbel <krebbel@linux.ibm.com>
* config/tc-s390.c (skip_optargs_p): New function.
(md_gather_operands): Use skip_optargs_p.
* testsuite/gas/s390/s390.exp: Run the new test.
* testsuite/gas/s390/zarch-optargs.d: New test.
* testsuite/gas/s390/zarch-optargs.s: New test.
We support source like the following
.data
.quad x-.
.space 8
x:
where at the time the .quad line is assembled, x is unknown so a fixup
is emitted for later evaluation. This is supported for data even when
the target may not have relocations for the expression, for example,
32-bit powerpc targets lack a 64-bit reloc. As long as the fixup
resolves at assembly time, gas is happy.
The idea of this patch is to support fixups that resolve at assembly
time for instructions too, even when the target might lack the
necessary relocations (and thus no howto).
* config/tc-ppc.c (fixup_size): New function.
(md_assemble): Use it to derive size and pcrel directly
from fixup reloc type.
The PE target can insert NOP's for padding to 4 byte alignment.
This was causing a testcase failure, this commit fixes the testcase.
This commit also escapes some full-stops in the testcase regexp.
2018-11-06 Matthew Malcomson <matthew.malcomson@arm.com>
* testsuite/gas/arm/neon-cond-bad_t2.d: Fix testcase for PE
target.
VCVT between f16 and f32 is an Advanced SIMD instruction.
Not all the VCVT alternatives need neon, hence the check for neon is in
the encode function.
The check on neon for VCVT.f16.f32 (and vice versa) is missing.
vshcmd: > echo 'vcvt.f16.f32 d1, q1' | gas/as-new -mfpu=vfpxd -march=armv8.5-a -
testdir [15:59:10] $
Also, the handling of the condition code behaves differently to other
SIMD instructions -- no error message is produced when assembling an
instruction with a condition code suffix despite the arm encoding not
allowing a condition code. (n.b. the actual binary produced is
independent of the suffix).
The instruction should be treated similarly to VSUBL that has the same
caveat of "must be unconditional" describing the {<c>} symbol. vcvt
half-precision to single precision found in F6.1.58 in the ARM
Architecture Reference Manual issue C.a, vsubl found in F6.1.240 in
the ARM Architecture Reference Manual issue C.a
2018-11-06 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-arm.c (do_neon_cvt_1): Add check for neon and condition
codes to half-precision conversion.
* testsuite/gas/arm/neon-cond-bad-inc.s: Check vcvteq disallowed.
* testsuite/gas/arm/neon-cond-bad.l: Likewise.
* testsuite/gas/arm/neon-cond-bad_t2.d: Check vcvteq allowed in IT
block.
* testsuite/gas/arm/vfp-bad.l: Ensure vcvt doesn't work without neon.
* testsuite/gas/arm/vfp-bad.s: Likewise.
The instruction mask bits should never overlap any of the operands,
nor should operand bits overlap, but some operands weren't checked.
This patch arranges to check the omitted operands, using a mask
returned by the operand->insert function. Some tweaking of various
insert functions is needed to support this: The error case must set
field bits.
Since I was looking at the insert functions, I tidied some dead code
and simplified some of the powerpc_operands entries.
gas/
* config/tc-ppc.c (insn_validate): Don't ignore mask in
PPC_OPSHIFT_INV case. Call the insert function to calculate
a mask.
opcodes/
* ppc-opc.c (insert_arx, insert_ary, insert_rx, insert_ry, insert_ls),
(insert_evuimm1_ex0, insert_evuimm2_ex0, insert_evuimm4_ex0),
(insert_evuimm8_ex0, insert_evuimm_lt8, insert_evuimm_lt16),
(insert_rD_rS_even, insert_off_lsp, insert_off_spe2, insert_Ddd):
Don't return zero on error, insert mask bits instead.
(insert_sd4h, extract_sd4h, insert_sd4w, extract_sd4w): Delete.
(insert_sh6, extract_sh6): Delete dead code.
(insert_sprbat, insert_sprg): Use unsigned comparisions.
(powerpc_operands <OIMM>): Set shift count rather than using
PPC_OPSHIFT_INV.
<SE_SDH, SE_SDW>: Likewise. Don't use insert/extract functions.
This adds another check that might have saved me a little time
recently if it had been present.
* config/tc-ppc.c (insn_validate): Check that optional operands
are not followed by non-optional operands.
For the flavors having a GPR operand EVEX.W is ignored outside of 64-bit
mode. The mnemonic should therefore not be KMOVQ, the GPR operand should
not name a non-existing 64-bit register, just like is already the case
for the AVX counterparts, and the Disp8 scaling factor should be 4
rather than 8.
PEXTR{B,W} and PINSR{B,W}, just like for AVX512BW, are WIG, no matter
that the SDM uses a nonstandard description of that fact.
PEXTRD, even with EVEX.W set, ignores that bit outside of 64-bit mode,
just like its AVX counterpart.
Many VEX-/EVEX-encoded instructions accessing GPRs become WIG outside of
64-bit mode. The respective templates should specify neither VexWIG nor
VexW0, but instead the setting of the bit should be determined from
- REX.W in 64-bit mode,
- the setting established through -mvexwig= / -mevexwig= otherwise.
This implies that the evex-wig2 testcase needs to go away, as being
wrong altogether.
A few test additions desirable here will only happen in later patches,
as the disassembler needs adjustments first.
Once again SSE2AVX templates are left alone, for it being unclear what
the behavior there should be.
Quite a few templates were marked LIG while really the insns aren't.
Introduce descriptive shorthands once again, instead of continuing to
use the less legible original forms.
The 0F C5 encoding is indeed a load type one (just that memory operands
are not permitted), while the 0F 3A 15 encoding is obviously a store.
Allow the pseudo prefixes to be used to select between them.
Also move (without any change) the secondary AVX512BW templates next to
the primary one.
Commits 6865c0435a ("x86: Support VEX/EVEX WIG encoding") and 6fa52824c3
("x86: Replace VexW=3 with VexWIG") omitted quite a few templates, oddly
enough in some cases despite testcases getting added (which then were
recorded with wrong expected output).
Also adjust VPMAXUB's attributes in the AVX512BW case to match ordering
of that of neighboring templates.
For the moment SSE2AVX templates are left alone, as it isn't clear
whether they were intentionally left untouched by the original commits
(the descriptions don't say either way).
In this context I question the decision in commit 0375113302 ("x86: Add
-mvexwig=[0|1] option to assembler") to move the logic to determine the
value of the W bit ahead of the decision whether to use 2-byte VEX:
While I can see this as one possible interpretation of -mvexwig=, the
other alternative (setting the value of the bit only if it actually
exists in the encoding) looks as reasonable to me, and perhaps even more
in line with us generally trying to pick the shortest encoding.
commit e60f4d3bda
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Mon Nov 5 09:01:26 2018 -0800
x86: Disable GOT relaxation with data prefix
Since linker GOT relaxation isn't valid for 16-bit GOT access, we should
disable GOT relaxation with data prefix.
run_dump_test proposes an ld action but when trying to make use of it in
a gas test it gave me some Tcl error. It turns out that it references
the check_shared_lib_support procedure and ld_elf_shared_opt variable
both only available in ld-lib.exp. I've thus moved the procedure in
binutils-common.exp and defined the variable needed in the various
default.exp of testsuite that seem to be using run_dump_test.
Since check_shared_lib_support itself references the ld variable not
defined in binutils-common I've defined it from LD in run_dump_test and
fixed LD and LDFLAGS to be defined as expected by run_dump_test in the
various default.exp of testsuite using run_dump_test.
2018-11-01 Thomas Preud'homme <thomas.preudhomme@linaro.org>
binutils/
* testsuite/config/default.exp: Define LD, LDFLAGS and
ld_elf_shared_opt.
* testsuite/lib/binutils-common.exp (check_shared_lib_support): Moved
from ld-lib.exp.
(run_dump_test): Set ld to $LD.
gas/
* testsuite/config/default.exp: Define LD, LDFLAGS and
ld_elf_shared_opt.
ld/
* testsuite/lib/ld-lib.exp (check_shared_lib_support): Moved to
binutils-common.exp.
This test never used to test the output of objdump as the old 'error-output'
check would exit after verifying the output in stdout and stderr from the
assembler. Given the use of warning_output now, the objdump runs and expects
its output to be verified. Assuming the correct disassembly of these
instructions is tested elsewhere given we never tested them here, this patch
removes the objdump run.
gas/ChangeLog
2018-10-31 Andre Vieira <andre.simoesdiasvieira@arm.com>
* testsuite/gas/arm/armv8-a+rdma-warning.d: Remove objdump execution.