This patch is a reimplementation of [1] which was submitted in 2015 by
Neil Schellenberger. Copyright issue was sorted out [2] last year.
It proposed a new section (.gnu.xhash) and related dynamic tag
(DT_GNU_XHASH). The new section would be virtually identical to the
existing .gnu.hash except for the translation table (xlat) which would
contain correct MIPS .dynsym indexes corresponding to the hashvals in
chains. This is because MIPS ABI imposes a different ordering on the
dynsyms than the one expected by the .gnu.hash section. Another addition
would be a leading word (ngnusyms) which would contain the number of
entries in the translation table.
In this patch, the new section name and dynamic tag are changed to
reflect the fact that the section should be treated as MIPS-specific
(.MIPS.xhash and DT_MIPS_XHASH).
This patch addresses the alignment issue as reported in [3], which is
caused by the leading word added to the .MIPS.xhash section. Leading word
is removed in this patch, and the number of entries in the translation
table is now calculated using DT_MIPS_SYMTABNO dynamic tag (this is
addressed by the corresponding glibc patch).
Suggestions on coding style in [4] were taken into account. Existing
GNU hash testcase was covered, and another one was added in the MIPS
part of the testsuite.
The other major change is reserving MIPS ABI version 5 for .MIPS.xhash,
marking the need of support for .MIPS.xhash in the dynamic linker (again,
addressed in the corresponding glibc patch). This is something which I
am not sure of, especially after reading [5]. I am confused on whether
this ABI version is reserved for IFUNC, or it can be used for this
purpose.
Already mentioned glibc patch is submitted at:
https://sourceware.org/ml/libc-alpha/2019-06/msg00456.html
[1] https://sourceware.org/ml/binutils/2015-10/msg00057.html
[2] https://sourceware.org/ml/binutils/2018-03/msg00025.html
[3] https://sourceware.org/ml/binutils/2016-01/msg00006.html
[4] https://sourceware.org/ml/binutils/2016-02/msg00097.html
[5] https://sourceware.org/ml/libc-alpha/2016-12/msg00853.html
ld * emulparams/elf32bmip.sh: Add .MIPS.xhash section.
* emulparams/elf32bmipn32-defs.sh: Add .MIPS.xhash section.
* emulparams/elf64bmip-defs.sh: Add .MIPS.xhash section.
* emultempl/mipself.em: Remove mips_after_parse function.
* testsuite/ld-elf/hash.d: Update comment.
* testsuite/ld-mips-elf/hash1.d: New test.
* testsuite/ld-mips-elf/hash1.s: Ditto.
* testsuite/ld-mips-elf/hash1a.d: Remove.
* testsuite/ld-mips-elf/hash1b.d: Ditto.
* testsuite/ld-mips-elf/hash1c.d: Ditto
* testsuite/ld-mips-elf/hash2.d: New test.
* testsuite/ld-mips-elf/mips-elf.exp: New tests.
* testsuite/ld-mips-elf/start.s: New test.
bfd * elf-bfd.h (struct elf_backend_data): New members.
* elflink.c (_bfd_elf_link_create_dynamic_sections): Create
.gnu.hash section if necessary.
(struct collect_gnu_hash_codes): New member.
(elf_gnu_hash_process_symidx): New function name.
(elf_renumber_gnu_hash_syms): Ignore local and undefined
symbols. Record xlat location for every symbol which should have
a .MIPS.xhash entry.
(bfd_elf_size_dynamic_sections): Add DT_GNU_HASH dynamic tag to
dynamic section if necessary.
(GNU_HASH_SECTION_NAME): New define.
(bfd_elf_size_dynsym_hash_dynstr): Get .MIPS.xhash section.
Update the section size info.
* elfxx-mips.c (struct mips_elf_hash_sort_data): New members.
(struct mips_elf_link_hash_entry): New member.
(mips_elf_link_hash_newfunc): Initialize .MIPS.xhash translation
table location.
(mips_elf_sort_hash_table): Initialize the pointer to the
.MIPS.xhash section.
(mips_elf_sort_hash_table_f): Populate the .MIPS.xhash
translation table entry with the symbol dynindx.
(_bfd_mips_elf_section_from_shdr): Add SHT_MIPS_XHASH.
(_bfd_mips_elf_fake_sections): Initialize .MIPS.xhash section
info.
(_bfd_mips_elf_create_dynamic_sections): Create .MIPS.xhash
section.
(_bfd_mips_elf_size_dynamic_sections): Add DT_MIPS_XHASH tag to
dynamic section.
(_bfd_mips_elf_finish_synamic_sections): Add DT_MIPS_XHASH.
(_bfd_mips_elf_final_write_processing): Set .MIPS.xhash section
sh_link info.
(_bfd_mips_elf_get_target_dtag): Get DT_MIPS_XHASH tag.
(MIPS_LIBC_ABI_XHASH): New ABI version enum value.
(_bfd_mips_post_process_headers): Mark the ABI version as
MIPS_LIBC_ABI_XHASH if there exists a .MIPS.xhash section,
but not a .hash section.
(_bfd_mips_elf_record_xhash_symbol): New function. Record a
position in the translation table, associated with the hash
entry.
* elfxx-mips.h (literal_reloc_p): Define
elf_backend_record_xhash_symbol backend hook.
* elfxx-target.h: Initialize elf_backend_record_xhash_symbol
backend hook.
include * elf/mips.h (SHT_GNU_XHASH): New define.
(DT_GNU_XHASH): New define.
binutils * readelf.c (get_mips_dynamic_type): Return MIPS_XHASH dynamic type.
(get_mips_section_type_name): Return MI{S_XHASH name string.
(dynamic_section_mips_val): Initialize the .MIPS.xhash dynamic
info.
(process_symbol_table): Initialize the .MIPS.xhash section
pointer. Adjust the readelf output to support the new section.
(process_object): Set the .MIPS.xhash dynamic info to zero.
The following tests fail on wince as they rely on mapping symbols to
give them a fixed order.
This skips them on platforms that don't have mapping symbols.
binutils/ChangeLog:
* testsuite/binutils-all/arm/in-order-all.d: Skip on pe, wince, coff.
* testsuite/binutils-all/arm/in-order.d: Likewise.
* testsuite/binutils-all/arm/out-of-order-all.d: Likewise.
* testsuite/binutils-all/arm/out-of-order.d: Likewise.
When printing unknown note types, readelf prints the raw description
section byte-by-byte. However, it does not mask appropriately, e.g. it
prints the byte 'ba' as 'ffffffba'.
* readelf.c (process_note): Mask unknown description data bytes.
I noticed the test for overflow of amt = size * nmemb in get_data
wasn't effective. An obvious example of nmemb = 3 and size = half max
value overflows but doesn't result in amt < nmemb. This patch fixes
this problem and reports a size truncation or overflow rather than out
of memory in more cases.
* readelf.c (get_data): Improve overflow checks.
PR 24777
* doc/binutils.texi: Ensure consistent formating of title strings
for man pages. Extend the title of the size man page to be more
informative.
* testsuite/binutils-all/objdump.exp
(test_objdump_dotnet_assemblies): Fix test to distinguish errors
in parsing simple pei-i386 and pei-x86-64 vs parsing the newly
introduced machine types.
* testsuite/gentestdlls.c (write_simple_dll): New function.
(main): Generate simple and Linux-specific variants of pei-i386
and pei-x86-64 files so both can be used by tests.
PR 24798
* dwarf.c (process_cu_tu_index): Avoid integer overflow on 64-bit
systems by casting ncols and nslots expressions to size_t. Display
number of columns and slots before giving up due to buffer overflow.
Use %u to display unsigned ints. Perform more pointer wrap tests.
PR 24818
* objdump.c (is_relocateable): Delete.
(load_specific_debug_section): Test the abfd for relocations
directly, rather than relying upon is_relocateable.
(dump_dwarf): Delete initlialization of is_relocateable.
When SHF_GNU_MBIND was added in the SHF_LOOS to SHF_HIOS range, it
should have required ELFOSABI_GNU since these flags are already in use
by other OSes. HPUX SHF_HP_TLS in fact has the same value. That
means no place in binutils should test SHF_GNU_MBIND without first
checking OSABI, and SHF_GNU_MBIND should not be set without also
setting OSABI. At least, that's the ideal, but the patch accepts
SHF_GNU_MBIND on ELFOSABI_NONE object files since gas didn't always
set OSABI. However, to reinforce the fact that SHF_GNU_MBIND isn't
proper without a non-zero OSABI, readelf will display the flag as
LOOS+0 if OSABI isn't set.
The clash with SHF_HP_TLS means that hppa64-linux either has that flag
on .tbss sections or supports GNU_MBIND, not both. (hppa64-linux
users, if there are any, may have noticed that GNU ld since 2017
mysteriously aligned their .tbss sections to a 4k boundary. That was
one consequence of SHF_HP_TLS being blindly interpreted as
SHF_GNU_MBIND.) Since it seems that binutils, gdb, gcc, glibc, and
the linux kernel don't care about SHF_HP_TLS I took that flag out of
.tbss for hppa64-linux.
bfd/
* elf-bfd.h (enum elf_gnu_osabi): Add elf_gnu_osabi_mbind.
* elf.c (_bfd_elf_make_section_from_shdr): Set elf_gnu_osabi_mbind.
(get_program_header_size): Formatting. Only test SH_GNU_MBIND
when elf_gnu_osabi_mbind is set.
(_bfd_elf_map_sections_to_segments): Likewise.
(_bfd_elf_init_private_section_data): Likewise.
(_bfd_elf_final_write_processing): Update comment.
* elf64-hppa.c (elf64_hppa_special_sections): Move .tbss entry.
(elf_backend_special_sections): Define without .tbss for linux.
binutils/
* readelf.c (get_parisc_segment_type): Split off hpux entries..
(get_ia64_segment_type): ..and these..
(get_hpux_segment_type): ..to here.
(get_segment_type): Condition GNU_MBIND on osabi. Use
get_hpux_segment_type.
(get_symbol_binding): Do not print UNIQUE for ELFOSABI_NONE.
(get_symbol_type): Do not print IFUNC for ELFOSABI_NONE.
gas/
* config/obj-elf.c (obj_elf_change_section): Don't emit a fatal
error for non-SHF_ALLOC SHF_GNU_MBIND here.
(obj_elf_parse_section_letters): Return SHF_GNU_MBIND in new
gnu_attr param.
(obj_elf_section): Adjust obj_elf_parse_section_letters call.
Formatting. Set SHF_GNU_MBIND and elf_osabi from gnu_attr.
Emit normal error for non-SHF_ALLOC SHF_GNU_MBIND and wrong osabi.
(obj_elf_type): Set elf_osabi for ifunc.
* testsuite/gas/elf/section12a.d: xfail msp430 and hpux.
* testsuite/gas/elf/section12b.d: Likewise.
* testsuite/gas/elf/section13.d: Likewise.
* testsuite/gas/elf/section13.l: Adjust expected error.
ld/
* emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Condition
SHF_GNU_MBIND on osabi. Set output elf_gnu_osabi_mbind.
PR 24708
* elf.c (_bfd_elf_slurp_version_tables): Check for an excessively
large version reference section.
* compress.c (bfd_get_full_section_contents): Check for an
uncompressed section whose size is larger than the file size.
PR 24703
binutils* bucomm.c (bfd_nonfatal): If no bfd error code has been set then
indicate this in the output.
(bfd_nonfatal_message): Likewise.
bfd * mach-o-arm.c (bfd_mach_o_arm_canonicalize_one_reloc): Add error
messages for failures.
* mach-o.c (bfd_mach_o_canonicalize_relocs): Set an bfd error code
if returning an error value.
With my (oldish) gcc I'm seeing
.../binutils/readelf.c: In function dump_ctf_indent_lines:
.../binutils/readelf.c:13851: error: declaration of spaces shadows a global declaration
.../binutils/../include/libiberty.h:253: error: shadowed declaration is here
With my (oldish) gcc I'm seeing
.../binutils/objdump.c: In function dump_ctf_indent_lines:
.../binutils/objdump.c:3210: error: declaration of spaces shadows a global declaration
.../binutils/../include/libiberty.h:253: error: shadowed declaration is here
Revert:
binutls 2019-05-29 Nick Clifton <nickc@redhat.com>
* configure.ac (LIBCTF): Export. Set to empty for non-ELF based
targets.
(HAVE_LIBCTF): Define if libctf support is available.
* Makefile.am (LIBCTF): Set value to @LIBCTF@.
* objdump.c: Make CTF code conditional upon HAVE_LIBCTF being
defined.
* readelf.c: Likewise.
* configure: Regenerate.
* Makefile.in: Regenerate.
* config.in: Regenerate.
top 2019-05-29 Nick Clifton <nickc@redhat.com>
* configure.ac (noconfigdirs): Add libctf if the target does not use
the ELF file format.
* configure: Regenerate.
- Use of nonportable <endian.h>
- Use of qsort_r
- Use of zlib without appropriate magic to pull in the binutils zlib
- Use of off64_t without checking (fixed by dropping the unused fields
that need off64_t entirely)
- signedness problems due to long being too short a type on 32-bit
platforms: ctf_id_t is now 'unsigned long', and CTF_ERR must be
used only for functions that return ctf_id_t
- One lingering use of bzero() and of <sys/errno.h>
All fixed, using code from gnulib where possible.
Relatedly, set cts_size in a couple of places it was missed
(string table and symbol table loading upon ctf_bfdopen()).
binutils/
* objdump.c (make_ctfsect): Drop cts_type, cts_flags, and
cts_offset.
* readelf.c (shdr_to_ctf_sect): Likewise.
include/
* ctf-api.h (ctf_sect_t): Drop cts_type, cts_flags, and cts_offset.
(ctf_id_t): This is now an unsigned type.
(CTF_ERR): Cast it to ctf_id_t. Note that it should only be used
for ctf_id_t-returning functions.
libctf/
* Makefile.am (ZLIB): New.
(ZLIBINC): Likewise.
(AM_CFLAGS): Use them.
(libctf_a_LIBADD): New, for LIBOBJS.
* configure.ac: Check for zlib, endian.h, and qsort_r.
* ctf-endian.h: New, providing htole64 and le64toh.
* swap.h: Code style fixes.
(bswap_identity_64): New.
* qsort_r.c: New, from gnulib (with one added #include).
* ctf-decls.h: New, providing a conditional qsort_r declaration,
and unconditional definitions of MIN and MAX.
* ctf-impl.h: Use it. Do not use <sys/errno.h>.
(ctf_set_errno): Now returns unsigned long.
* ctf-util.c (ctf_set_errno): Adjust here too.
* ctf-archive.c: Use ctf-endian.h.
(ctf_arc_open_by_offset): Use memset, not bzero. Drop cts_type,
cts_flags and cts_offset.
(ctf_arc_write): Drop debugging dependent on the size of off_t.
* ctf-create.c: Provide a definition of roundup if not defined.
(ctf_create): Drop cts_type, cts_flags and cts_offset.
(ctf_add_reftype): Do not check if type IDs are below zero.
(ctf_add_slice): Likewise.
(ctf_add_typedef): Likewise.
(ctf_add_member_offset): Cast error-returning ssize_t's to size_t
when known error-free. Drop CTF_ERR usage for functions returning
int.
(ctf_add_member_encoded): Drop CTF_ERR usage for functions returning
int.
(ctf_add_variable): Likewise.
(enumcmp): Likewise.
(enumadd): Likewise.
(membcmp): Likewise.
(ctf_add_type): Likewise. Cast error-returning ssize_t's to size_t
when known error-free.
* ctf-dump.c (ctf_is_slice): Drop CTF_ERR usage for functions
returning int: use CTF_ERR for functions returning ctf_type_id.
(ctf_dump_label): Likewise.
(ctf_dump_objts): Likewise.
* ctf-labels.c (ctf_label_topmost): Likewise.
(ctf_label_iter): Likewise.
(ctf_label_info): Likewise.
* ctf-lookup.c (ctf_func_args): Likewise.
* ctf-open.c (upgrade_types): Cast to size_t where appropriate.
(ctf_bufopen): Likewise. Use zlib types as needed.
* ctf-types.c (ctf_member_iter): Drop CTF_ERR usage for functions
returning int.
(ctf_enum_iter): Likewise.
(ctf_type_size): Likewise.
(ctf_type_align): Likewise. Cast to size_t where appropriate.
(ctf_type_kind_unsliced): Likewise.
(ctf_type_kind): Likewise.
(ctf_type_encoding): Likewise.
(ctf_member_info): Likewise.
(ctf_array_info): Likewise.
(ctf_enum_value): Likewise.
(ctf_type_rvisit): Likewise.
* ctf-open-bfd.c (ctf_bfdopen): Drop cts_type, cts_flags and
cts_offset.
(ctf_simple_open): Likewise.
(ctf_bfdopen_ctfsect): Likewise. Set cts_size properly.
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.h: Likewise.
* configure: Likewise.
This changes s12z to use generic.em and genelf.em, which is more
suited to targets that use the generic linker hash table. A tweak or
two to some testsuite predicates then gives a clean testsuite result
on the target.
PR 24596
binutils/
* testsuite/lib/binutils-common.exp (supports_gnu_unique): Add
s12z to targets not supporting this feature.
ld/
* emulparams/m9s12zelf.sh (TEMPLATE_NAME): Set to generic.
(EXTRA_EM_FILE): Define to genelf.
* testsuite/lib/ld-lib.exp (uses_genelf): Add s12z.
top * src-release.sh (do_proto_toplev): Add libctf to list of
directories that can be disabled.
binutils* README-how-to-make-a-release: Add libctf to list of directories
that need updates in their ChangeLogs.
top * configure.ac (noconfigdirs): Add libctf if the target does not use
the ELF file format.
* configure: Regenerate.
binutils* configure.ac (LIBCTF): Export. Set to empty for non-ELF based
targets.
(HAVE_LIBCTF): Define if libctf support is available.
* Makefile.am (LIBCTF): Set value to @LIBCTF@.
* objdump.c: Make CTF code conditional upon HAVE_LIBCTF being
defined.
* readelf.c: Likewise.
* configure: Regenerate.
* Makefile.in: Regenerate.
* config.in: Regenerate.
This introduces CTF support for objdump and readelf. objdump has the
following new arguments:
--ctf=SECTION: display CTF in the given SECTION
--ctf-parent=SECTION: name of CTF section that is the parent of this section
readelf has the above, and these two as well:
--ctf-symbols=SECTION: name of symbol table section (optional)
--ctf-strings=SECTION: name of string table section (optional)
(objdump can always use BFD machinery to determine the applicable string
and symbol tables automatically, so these arguments are unnecessary.)
Nearly all the work is done by the ctf_dump machinery in libctf: most of
the remaining work is option-processing and section-reading, and thus is
different for objdump and readelf: the minimal amount of similar code
remaining is, in my view, too small to share, particularly given that
objdump uses ctf_bfdopen() and readelf uses ctf_simple_open() since it
doesn't have a bfd.
I am not particularly satisfied with the way resources are freed in
either of these (I was forced to do it at the top level, for lack of
anywhere else to free resources allocated during option processing), but
I can't see any better way to do it without introducing new
infrastructure for no other purpose.
There are essentially arbitrary ordering changes to the Makefile.in's
order of libtool-related stuff that I can't get rid of, but they have no
semantic effect. (It is possible that some hunks of these changes could
be dropped, but that seems a bit risky to me.)
binutils/
* objdump.c (ctf-api.h): New include.
(dump_ctf_section_info): New variable.
(dump_ctf_section_name): Likewise.
(usage): Describe new options.
(enum option_values): Add OPTION_CTF and OPTION_CTF_PARENT.
(main): Use them to add --ctf and --ctf-parent.
(read_section_stabs): Add new parameter, entsize_ptr.
(find_stabs_section): Adjust accordingly.
(make_ctfsect): New.
(dump_ctf_indent_lines): New.
(dump_ctf_archive_member): New.
(dump_ctf): New.
(dump_bfd): Call it. Free resources afterwards.
* readelf.c (ctf-api.h): New include.
(CTF_DUMP): New.
(static bfd_boolean do_ctf): Likewise.
(dump_ctf_parent_name): Likewise.
(dump_ctf_symtab_name): Likewise.
(dump_ctf_strtab_name): Likewise.
(OPTION_CTF_DUMP): Likewise.
(OPTION_CTF_PARENT): Likewise.
(OPTION_CTF_SYMBOLS): Likewise.
(OPTION_CTF_STRINGS): Likewise.
(options): Add them.
(usage): Likewise.
(parse_args): Handle the new options, requesting CTF_DUMP.
(process_section_contents): Handle CTF_DUMP.
(shdr_to_ctf_sect): New.
(dump_ctf_indent_lines): New.
(dump_section_as_ctf): New.
(main): Free resources.
* Makefile.am (LIBCTF): New variable.
(objdump_DEPENDENCIES): Use it.
(readelf_DEPENDENCIES): Likewise.
(objdump_LDADD): Likewise.
(readelf_LDADD): Likewise.
* aclocal.m4: Regenerated.
* Makefile.in: Likewise.
* doc/binutils.texi (objdump): Document the new options.
(readelf): Likewise.
* doc/ctf.options.texi: New.
* doc/Makefile.in: Regenerated.
* NEWS: Mention the new feature.
I noticed that one of the readelf errors stopped processing of further
group sections. This patch makes readelf continue on to other groups,
like it does with the other errors.
* readelf.c (process_section_groups): Continue processing groups
when sh_entsize exceeds group size.
The bottom 2 bits of st_other are used for visibility, the top 6 bits are
de facto reserved for processor specific use. This patch defines a
bits to mark function symbols that follow a variant procedure call standard
with different register usage convention.
A dynamic tag is also defined that marks modules with R_<CLS>_JUMP_SLOT
relocations referencing symbols marked with STO_AARCH64_VARIANT_PCS.
This can be used by dynamic linkers that support lazy binding to decide
what registers need to be preserved during symbol resolution.
binutils/ChangeLog:
* readelf.c (get_aarch64_dynamic_type): Handle DT_AARCH64_VARIANT_PCS.
(get_aarch64_symbol_other): New, handles STO_AARCH64_VARIANT_PCS.
(get_symbol_other): Call get_aarch64_symbol_other.
include/ChangeLog:
* elf/aarch64.h (DT_AARCH64_VARIANT_PCS): Define.
(STO_AARCH64_VARIANT_PCS): Define.
This patch adds initial 64-bit insn assembler/disassembler support.
The only instruction added is "pnop" along with the automatic aligning
of prefix instruction so they do not cross 64-byte boundaries.
include/
* dis-asm.h (WIDE_OUTPUT): Define.
* opcode/ppc.h (prefix_opcodes, prefix_num_opcodes): Declare.
(PPC_OPCODE_POWERXX, PPC_GET_PREFIX, PPC_GET_SUFFIX),
(PPC_PREFIX_P, PPC_PREFIX_SEG): Define.
opcodes/
* ppc-dis.c (ppc_opts): Add "future" entry.
(PREFIX_OPCD_SEGS): Define.
(prefix_opcd_indices): New array.
(disassemble_init_powerpc): Initialize prefix_opcd_indices.
(lookup_prefix): New function.
(print_insn_powerpc): Handle 64-bit prefix instructions.
* ppc-opc.c (PREFIX_OP, PREFIX_FORM, SUFFIX_MASK, PREFIX_MASK),
(PMRR, POWERXX): Define.
(prefix_opcodes): New instruction table.
(prefix_num_opcodes): New constant.
binutils/
* objdump.c (disassemble_bytes): Set WIDE_OUTPUT in flags.
gas/
* config/tc-ppc.c (ppc_setup_opcodes): Handle prefix_opcodes.
(struct insn_label_list): New.
(insn_labels, free_insn_labels): New variables.
(ppc_record_label, ppc_clear_labels, ppc_start_line_hook): New funcs.
(ppc_frob_label, ppc_new_dot_label): Move functions earlier in file
and call ppc_record_label.
(md_assemble): Handle 64-bit prefix instructions. Align labels
that are on the same line as a prefix instruction.
* config/tc-ppc.h (tc_frob_label, ppc_frob_label): Move to
later in the file.
(md_start_line_hook): Define.
(ppc_start_line_hook): Declare.
* testsuite/gas/ppc/prefix-align.d,
* testsuite/gas/ppc/prefix-align.s: New test.
* testsuite/gas/ppc/ppc.exp: Run new test.
This patch adds support for ELF64 eBPF to readelf, and fixes a `nm'
test to run properly in bpf-*-* targets.
binutils/ChangeLog:
2019-05-23 Jose E. Marchesi <jose.marchesi@oracle.com>
* readelf.c: Include elf/bpf.h.
(guess_is_rela): Hanle EM_BPF.
(dump_relocations): Likewise.
(is_32bit_abs_reloc): Likewise.
* testsuite/binutils-all/nm.exp: Add bpf-*-* to the list of
ELF targets.
The SVE DRAWF register names are missing from binutils, this may cause objdump
and readelf to ignore certain DRAWF output as the registers are unknown (most
notably CIEs).
This patch adds the registers in accordance to the "DWARF for ARM(r) 64-bit
Architecture (AARch64) with SVE support" documentation [1].
[1] https://developer.arm.com/docs/100985/latest/dwarf-for-the-arm-64-bit-architecture-aarch64-with-sve-support
binutils/ChangeLog:
* dwarf.c (dwarf_regnames_aarch64): Add SVE registers.
* testsuite/binutils-all/aarch64/sve-dwarf-registers.d: New test.
* testsuite/binutils-all/aarch64/sve-dwarf-registers.s: New test.
On IRIX 5, every global symbol that is not explicitly labelled as
being a function is assumed to be an object. There is no reason
why IRIX behaviour should extend to all MIPS targets, so limit this
to only IRIX targets.
gas/
PR 14798
* config/tc-mips.c (s_mips_globl): Only treat symbols that are
not explicitly labelled as BSF_OBJECTs for IRIX targets.
* testsuite/gas/mips/pr14798.s: New test source.
* testsuite/gas/mips/pr14798-irix.d: New test.
* testsuite/gas/mips/pr14798.d: Likewise.
* testsuite/gas/mips/mips.exp: Run the new tests.
binutils/
PR 14798
* testsuite/binutils-all/readelf.ss-mips: Update reference output.
* testsuite/binutils-all/readelf.ss-tmips: Likewise.
ld/
PR 14798
* testsuite/ld-mips-elf/reloc-6a.s: Specify .text section for
global code symbols.
* testsuite/ld-mips-elf/reloc-6b.s: Likewise.
bfd/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* elf32-arm.c (elf32_arm_merge_eabi_attributes): Add case for Tag_MVE_arch.
binutils/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* readelf.c (arm_attr_tag_MVE_arch): New array for Tag_MVE_arch values.
(arm_attr_public_tag arm_attr_public_tags): Add case for Tag_MVE_arch.
elfcpp/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* arm.h (Tag_MVE_arch): Define new enum value.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (mve_ext, mve_fp_ext): New features.
(armv8_1m_main_ext_table): Add new extensions.
(aeabi_set_public_attributes): Translate new features to new build attributes.
(arm_convert_symbolic_attribute): Add Tag_MVE_arch.
* doc/c-arm.texi: Document new extensions and new build attribute.
include/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* elf/arm.h (Tag_MVE_arch): Define new enum value.
* opcode/arm.h (FPU_MVE, FPU_MVE_FP): New MACROs for new features.
PR 19921
binutils* objcopy.c: Add new option --verilog-data-width. Use it to set
the value of VerilogDataWidth.
* doc/binutils.texi: Document the new option.
* testsuite/binutils-all/objcopy.exp: Run tests of new option.
* testsuite/binutils-all/verilog-1.hex: New file.
* testsuite/binutils-all/verilog-2.hex: New file.
* testsuite/binutils-all/verilog-4.hex: New file.
* testsuite/binutils-all/verilog-8.hex: New file.
* NEWS: Mention the new feature.
bfd * verilog.c: (VerilogDataWidth): New variable.
(verilog_write_record): Emit bytes in VerilogDataWidth bundles.
git commit 2379f9c475 introduced an rx-elf test failure. This fixes it.
* testsuite/binutils-all/objdump.exp (test_objdump_disas_limited),
(test_objdump_content_limited): Add text arg, use in place of .text.
(bintest_signed.o): Call get_standard_section_names for name of
text section.
For targets that treat addresses as signed (MIPS/SH64), user-specified
start/stop address limits cannot be compared directly to section VMAs.
We must sign-extend user-specified 32-bit address limits which have
bit 31 set for such targets.
binutils/
* objdump.c (sign_extend_address): New function.
(dump_bfd): Sign-extend user-specified start/stop addresses
for targets that need it.
* testsuite/binutils-all/objdump.exp: Add tests for objdump
with start and stop addresses in higher address ranges.
PR 24507
* nm.c: (print_format): New variable.
(value_format_32bit, value_format_64bit): Delete.
(set_print_radix): Remove code to alter value_format strings.
(set_output_format): Record chosen format in print_format.
(get_print_format): New function - constructs a printf formatting
string according to the requirements of size, radix, and output
format.
(print_value): Use get_print_format.
* testsuite/binutils-all/nm.exp: Add tests of "nm --format=posix"
and "nm -t d".
* objcopy.c (strip_main): Do not enable note merging by default if
just stripping debug or dwo information.
* doc/binutils.texi (strip): Update documentation.
Some of these tests were excluded for ns32k-netbsd, exclude for all
ns32k instead.
binutils/
* testsuite/binutils-all/copy-2.d: Don't run for ns32k-*-*.
* testsuite/binutils-all/copy-3.d: Likewise.
gas/
* testsuite/gas/all/gas.exp: Remove ns32k xfails.
* testsuite/gas/all/weakref1u.d: Don't run for ns32k-*-*.
ld/
* testsuite/ld-scripts/pr20302.d: Don't run for ns32k-*-*.
* testsuite/ld-scripts/section-match-1.d: Likewise.
* testsuite/ld-undefined/require-defined.exp: Likewise.
The patch is straightforward, it does the following:
- support the new Tag_CPU_arch build attribute value, ie.:
+ declare the new value
+ update all the asserts forcing logic to be reviewed for new
architectures
+ create a corresponding bfd_mach_arm_8_1M_MAIN enumerator in bfd and
add mapping from Tag_CPU_arch to it
+ teach readelf about new Tag_CPU_arch value
- declare armv8.1-m.main as a supported architecture value
- define Armv8.1-M Mainline in terms of feature bits available
- tell objdump mapping from bfd_mach_arm_8_1M_MAIN enumerator to feature
bits available
- update architecture-specific logic in gas and bfd guarded by the
asserts mentioned above.
- tests for all the above
ChangeLog entries are as follows:
*** bfd/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* archures.c (bfd_mach_arm_8_1M_MAIN): Define.
* bfd-in2.h: Regenerate.
* cpu-arm.c (arch_info_struct): Add entry for Armv8.1-M Mainline.
* elf32-arm.c (using_thumb_only): Return true for Armv8.1-M Mainline
and update assert.
(using_thumb2): Likewise.
(using_thumb2_bl): Update assert.
(arch_has_arm_nop): Likewise.
(bfd_arm_get_mach_from_attributes): Add case for Armv8.1-M Mainline.
(tag_cpu_arch_combine): Add logic for Armv8.1-M Mainline merging.
*** binutils/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* readelf.c (arm_attr_tag_CPU_arch): Add entry for Armv8.1-M Mainline.
*** gas/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/tc-arm.c (cpu_arch_ver): Add entry for Armv8.1-M Mainline
Tag_CPU_arch build attribute value. Reindent.
(get_aeabi_cpu_arch_from_fset): Update assert.
(aeabi_set_public_attributes): Update assert for Tag_DIV_use logic.
* testsuite/gas/arm/attr-march-armv8_1-m.main.d: New test.
*** include/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* elf/arm.h (TAG_CPU_ARCH_V8_1M_MAIN): new macro.
(MAX_TAG_CPU_ARCH): Set value to above macro.
* opcode/arm.h (ARM_EXT2_V8_1M_MAIN): New macro.
(ARM_AEXT_V8_1M_MAIN): Likewise.
(ARM_AEXT2_V8_1M_MAIN): Likewise.
(ARM_ARCH_V8_1M_MAIN): Likewise.
*** ld/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* testsuite/ld-arm/attr-merge-13.attr: New test.
* testsuite/ld-arm/attr-merge-13a.s: New test.
* testsuite/ld-arm/attr-merge-13b.s: New test.
*** opcodes/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* arm-dis.c (select_arm_features): Add logic for Armv8.1-M Mainline.
This fixes the testcases that are failing due to my recent patch.
It turns out that the start address across baremetal and linux builds
isn't entirely predictable without a linker script. Since the address
themselves are not the important thing I am ignoring them now.
Secondly I was encoding data using .word using non 0 values, however
because .word is subjected to endiannes these non-zero values under
big-endian happen to fall into the encoding space of instructions which
changes the disassembly. Using 0 fixes this problem and the purpose of
the test still holds, though objdump will dump ... for data only sections,
which is ok as the data/insn mixed sections will test the patch.
The ARM Attributes sections is not important and is ignored.
binutils/ChangeLog:
* testsuite/binutils-all/aarch64/in-order.d: Likewise.
* testsuite/binutils-all/aarch64/out-of-order-all.d: Likewise.
* testsuite/binutils-all/aarch64/out-of-order.d: Likewise.
* testsuite/binutils-all/aarch64/out-of-order.s: Likewise.
* testsuite/binutils-all/arm/in-order-all.d: Likewise.
* testsuite/binutils-all/arm/in-order.d: Likewise.
* testsuite/binutils-all/arm/out-of-order-all.d: Likewise.
* testsuite/binutils-all/arm/out-of-order.d: Likewise.
* testsuite/binutils-all/arm/out-of-order.s: Likewise.
Similar to the AArch64 patches the Arm disassembler has the same issues with
out of order sections but also a few short comings.
For one thing there are multiple code blocks to determine mapping symbols, and
they all work slightly different, and neither fully correct. The first thing
this patch does is centralise the mapping symbols search into one function
mapping_symbol_for_insn. This function is then updated to perform a search in
a similar way as AArch64.
Their used to be a value has_mapping_symbols which was used to determine the
default disassembly for objects that have no mapping symbols. The problem with
the approach was that it was determining this value in the same loop that needed
it, which is why this field could take on the states -1, 0, 1 where -1 means
"don't know". However this means that until you actually find a mapping symbol
or reach the end of the disassembly glob, you don't know if you did the right
action or not, and if you didn't you can't correct it anymore.
This is why the two jump-reloc-veneers-* testcases end up disassembling some
insn as data when they shouldn't.
Out of order here refers to an object file where sections are not listed in a
monotonic increasing VMA order.
The ELF ABI for Arm [1] specifies the following for mapping symbols:
1) A text section must always have a corresponding mapping symbol at it's
start.
2) Data sections do not require any mapping symbols.
3) The range of a mapping symbol extends from the address it starts on up to
the next mapping symbol (exclusive) or section end (inclusive).
However there is no defined order between a symbol and it's corresponding
mapping symbol in the symbol table. This means that while in general we look
up for a corresponding mapping symbol, we have to make at least one check of
the symbol below the address being disassembled.
When disassembling different PCs within the same section, the search for mapping
symbol can be cached somewhat. We know that the mapping symbol corresponding to
the current PC is either the previous one used, or one at the same address as
the current PC.
However this optimization and mapping symbol search must stop as soon as we
reach the end or start of the section. Furthermore if we're only disassembling
a part of a section, the search is a allowed to search further than the current
chunk, but is not allowed to search past it (The mapping symbol if there, must
be at the same address, so in practice we usually stop at PC+4).
lastly, since only data sections don't require a mapping symbol the default
mapping type should be DATA and not INSN as previously defined, however if the
binary has had all its symbols stripped than this isn't very useful. To fix
this we determine the default based on the section flags. This will allow the
disassembler to be more useful on stripped binaries. If there is no section
than we assume you to be disassembling INSN.
[1] https://developer.arm.com/docs/ihi0044/latest/elf-for-the-arm-architecture-abi-2018q4-documentation#aaelf32-table4-7
binutils/ChangeLog:
* testsuite/binutils-all/arm/in-order-all.d: New test.
* testsuite/binutils-all/arm/in-order.d: New test.
* testsuite/binutils-all/arm/objdump.exp: Support .d tests.
* testsuite/binutils-all/arm/out-of-order-all.d: New test.
* testsuite/binutils-all/arm/out-of-order.T: New test.
* testsuite/binutils-all/arm/out-of-order.d: New test.
* testsuite/binutils-all/arm/out-of-order.s: New test.
ld/ChangeLog:
* testsuite/ld-arm/jump-reloc-veneers-cond-long.d: Update disassembly.
* testsuite/ld-arm/jump-reloc-veneers-long.d: Update disassembly.
opcodes/ChangeLog:
* arm-dis.c (struct arm_private_data): Remove has_mapping_symbols.
(mapping_symbol_for_insn): Implement new algorithm.
(print_insn): Remove duplicate code.
The documentation for -D says that on Arm platforms -D should disassemble
data as instructions.
"If the target is an ARM architecture this switch also has the effect of
forcing the disassembler to decode pieces of data found in code sections
as if they were instructions. "
This makes it do as it says on the tincan so it's more consistent with
aarch32. The usecase here is for baremetal developers who have created
their instructions using .word directives instead if .insn.
Though for Linux users I do find this behavior somewhat non-optimal.
Perhaps there should be a new flag that just disassembles the values
following the actual mapping symbol?
binutils/ChangeLog:
* testsuite/binutils-all/aarch64/in-order-all.d: New test.
* testsuite/binutils-all/aarch64/out-of-order-all.d: New test.
* testsuite/binutils-all/aarch64/out-of-order.d:
opcodes/ChangeLog:
* aarch64-dis.c (print_insn_aarch64):
Implement override.
My previous patch for AArch64 was not enough to catch all the cases where
disassembling an out-of-order section could go wrong. It had missed the case
DATA sections could be incorrectly disassembled as TEXT.
Out of order here refers to an object file where sections are not listed in a
monotonic increasing VMA order.
The ELF ABI for AArch64 [1] specifies the following for mapping symbols:
1) A text section must always have a corresponding mapping symbol at it's
start.
2) Data sections do not require any mapping symbols.
3) The range of a mapping symbol extends from the address it starts on up to
the next mapping symbol (exclusive) or section end (inclusive).
However there is no defined order between a symbol and it's corresponding
mapping symbol in the symbol table. This means that while in general we look
up for a corresponding mapping symbol, we have to make at least one check of
the symbol below the address being disassembled.
When disassembling different PCs within the same section, the search for mapping
symbol can be cached somewhat. We know that the mapping symbol corresponding to
the current PC is either the previous one used, or one at the same address as
the current PC.
However this optimization and mapping symbol search must stop as soon as we
reach the end or start of the section. Furthermore if we're only disassembling
a part of a section, the search is a allowed to search further than the current
chunk, but is not allowed to search past it (The mapping symbol if there, must
be at the same address, so in practice we usually stop at PC+4).
lastly, since only data sections don't require a mapping symbol the default
mapping type should be DATA and not INSN as previously defined, however if the
binary has had all its symbols stripped than this isn't very useful. To fix this
we determine the default based on the section flags. This will allow the
disassembler to be more useful on stripped binaries. If there is no section than
we assume you to be disassembling INSN.
[1] https://developer.arm.com/docs/ihi0056/latest/elf-for-the-arm-64-bit-architecture-aarch64-abi-2018q4#aaelf64-section4-5-4
binutils/ChangeLog:
* testsuite/binutils-all/aarch64/in-order.d: New test.
* testsuite/binutils-all/aarch64/out-of-order.d: Disassemble data as
well.
opcodes/ChangeLog:
* aarch64-dis.c (print_insn_aarch64): Update the mapping symbol search
order.
The AArch64 disassembler has an optimization that it uses to reduce the amount
it has to search for mapping symbols during disassembly. This optimization
assumes that sections are listed in the section header in monotonic increasing
VMAs. However this is not a requirement for the ELF specification.
Because of this when such "out of order" sections occur the disassembler would
pick the wrong mapping symbol to disassemble the section with.
This fixes it by explicitly passing along the stop offset for the current
disassembly glob and when this changes compared to the previous one we've seen
the optimization won't be performed. In effect this restarts the search from
a well defined starting point. Usually the symbol's address.
The existing stop_vma can't be used for this as it is allowed to be unset and
setting this unconditionally would change the semantics of this field.
binutils/ChangeLog:
* objdump.c (disassemble_bytes): Pass stop_offset.
* testsuite/binutils-all/aarch64/out-of-order.T: New test.
* testsuite/binutils-all/aarch64/out-of-order.d: New test.
* testsuite/binutils-all/aarch64/out-of-order.s: New test.
include/ChangeLog:
* dis-asm.h (struct disassemble_info): Add stop_offset.
opcodes/ChangeLog:
* aarch64-dis.c (last_stop_offset): New.
(print_insn_aarch64): Use stop_offset.
This is part of the patch series to add support for BTI and
PAC in AArch64 linker.
1) This patch adds new definitions of PAC enabled PLTs
and both BTI and PAC enabled PLTs.
2) It also defines the new dynamic tag DT_AARCH64_PAC_PLT
for the PAC enabled PLTs.
3) This patch adds a new ld command line option: --pac-plt.
In the presence of this option, the linker uses the PAC
enabled PLTs and marks with DT_AARCH64_PAC_PLT.
4) In case both BTI and PAC are enabled the linker should
pick PLTs enabled with both and also use dynamic tags for both.
All these are made according to the new AArch64 ELF ABI
https://developer.arm.com/docs/ihi0056/latest/elf-for-the-arm-64-bit-architecture-aarch64-abi-2018q4
*** bfd/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* elfnn-aarch64.c (PLT_PAC_ENTRY_SIZE, PLT_PAC_SMALL_ENTRY_SIZE): New.
(PLT_BTI_PAC_ENTRY_SIZE, PLT_BTI_PAC_SMALL_ENTRY_SIZE): New.
(setup_plt_values): Account for PAC or PAC and BTI enabled PLTs.
(elfNN_aarch64_size_dynamic_sections): Add checks for PLT_BTI_PAC
and PLT_PAC_PLT.
(elfNN_aarch64_finish_dynamic_sections): Account for PLT_BTI_PAC.
(get_plt_type): Add case for DT_AARCH64_PAC_PLT.
(elfNN_aarch64_plt_sym_val): Add cases for PLT_BTI_PAC and PLT_PAC.
*** binutils/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* readelf.c (get_aarch64_dynamic_type): Add case for
DT_AARCH64_PAC_PLT.
(dynamic_section_aarch64_val): Likewise.
*** include/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* elf/aarch64.h (DT_AARCH64_PAC_PLT): New.
*** ld/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* NEWS: Document --pac-plt.
* emultempl/aarch64elf.em (OPTION_PAC_PLT): New.
(PARSE_AND_LIST_LONGOPTS, PARSE_AND_LIST_OPTIONS): Add pac-plt.
(PARSE_AND_LIST_ARGS_CASES): Handle OPTION_PAC_PLT.
* testsuite/ld-aarch64/aarch64-elf.exp: Add the following tests.
* testsuite/ld-aarch64/bti-pac-plt-1.d: New test.
* testsuite/ld-aarch64/bti-pac-plt-2.d: New test.
* testsuite/ld-aarch64/pac-plt-1.d: New test.
* testsuite/ld-aarch64/pac-plt-2.d: New test.
* testsuite/ld-aarch64/bti-plt-1.s: Add .ifndef directive.
This is part of the patch series to add support for BTI and
PAC in AArch64 linker.
1) This patch adds a new ld command line option: --force-bti.
In the presence of this option, the linker enables BTI with the
GNU_PROPERTY_AARCH64_FEATURE_1_BTI feature. This gives out warning
in case of missing gnu notes for BTI in inputs.
2) It also defines a new set of BTI enabled PLTs. These are used either
when all the inputs are marked with GNU_PROPERTY_AARCH64_FEATURE_1_BTI
or when the new --force-bti option is used. This required adding new
fields in elf_aarch64_link_hash_table so that we could make the PLT
related information more generic.
3) It also defines a dynamic tag DT_AARCH64_BTI_PLT. The linker uses
this whenever it picks BTI enabled PLTs.
All these are made according to the new AArch64 ELF ABI
https://developer.arm.com/docs/ihi0056/latest/elf-for-the-arm-64-bit-architecture-aarch64-abi-2018q4
*** bfd/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
Szabolcs Nagy <szabolcs.nagy@arm.com>
* bfd-in.h (aarch64_plt_type, aarch64_enable_bti_type): New.
(aarch64_bti_pac_info): New.
(bfd_elf64_aarch64_set_options): Add aarch64_bti_pac_info argument.
(bfd_elf32_aarch64_set_options): Likewise.
* bfd-in2.h: Regenerate
* elfnn-aarch64.c (PLT_BTI_ENTRY_SIZE): New.
(PLT_BTI_SMALL_ENTRY_SIZE, PLT_BTI_TLSDESC_ENTRY_SIZE): New.
(elfNN_aarch64_small_plt0_bti_entry): New.
(elfNN_aarch64_small_plt_bti_entry): New.
(elfNN_aarch64_tlsdesc_small_plt_bti_entry): New.
(elf_aarch64_obj_tdata): Add no_bti_warn and plt_type fields.
(elf_aarch64_link_hash_table): Add plt0_entry, plt_entry and
tlsdesc_plt_entry_size fields.
(elfNN_aarch64_link_hash_table_create): Initialise the new fields.
(setup_plt_values): New helper function.
(bfd_elfNN_aarch64_set_options): Use new bp_info to set plt sizes and
bti enable type.
(elfNN_aarch64_allocate_dynrelocs): Use new size members instead of
fixed macros.
(elfNN_aarch64_size_dynamic_sections): Likewise and add checks.
(elfNN_aarch64_create_small_pltn_entry): Use new generic pointers
to plt stubs instead of fixed ones and update filling them according
to the need for bti.
(elfNN_aarch64_init_small_plt0_entry): Likewise.
(elfNN_aarch64_finish_dynamic_sections): Likewise.
(get_plt_type, elfNN_aarch64_get_synthetic_symtab): New.
(elfNN_aarch64_plt_sym_val): Update size accordingly.
(elfNN_aarch64_link_setup_gnu_properties): Set up plts if BTI GNU NOTE
is set.
(bfd_elfNN_get_synthetic_symtab): Define.
(elfNN_aarch64_merge_gnu_properties): Give out warning with --force-bti
and mising BTI NOTE SECTION.
*** binutils/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
Szabolcs Nagy <szabolcs.nagy@arm.com>
* readelf.c (get_aarch64_dynamic_type): New.
(get_dynamic_type): Use above for EM_AARCH64.
(dynamic_section_aarch64_val): New.
(process_dynamic_section): Use above for EM_AARCH64.
*** include/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
Szabolcs Nagy <szabolcs.nagy@arm.com>
* elf/aarch64.h (DT_AARCH64_BTI_PLT): New.
*** ld/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
Szabolcs Nagy <szabolcs.nagy@arm.com>
* NEWS: Document --force-bti.
* emultempl/aarch64elf.em (plt_type, bti_type, OPTION_FORCE_BTI): New.
(PARSE_AND_LIST_SHORTOPTS, PARSE_AND_LIST_OPTIONS): Add force-bti.
(PARSE_AND_LIST_ARGS_CASES): Handle OPTION_FORCE_BTI.
* testsuite/ld-aarch64/aarch64-elf.exp: Add all the tests below.
* testsuite/ld-aarch64/bti-plt-1.d: New test.
* testsuite/ld-aarch64/bti-plt-1.s: New test.
* testsuite/ld-aarch64/bti-plt-2.s: New test.
* testsuite/ld-aarch64/bti-plt-2.d: New test.
* testsuite/ld-aarch64/bti-plt-3.d: New test.
* testsuite/ld-aarch64/bti-plt-4.d: New test.
* testsuite/ld-aarch64/bti-plt-5.d: New test.
* testsuite/ld-aarch64/bti-plt-6.d: New test.
* testsuite/ld-aarch64/bti-plt-7.d: New test.
* testsuite/ld-aarch64/bti-plt-so.s: New test.
* testsuite/ld-aarch64/bti-plt.ld: New test.
This is part of the patch series to add support for BTI and
PAC in AArch64 linker.
This patch implements the following:
1) This extends in the gnu property support in the linker for
AArch64 by defining backend hooks for elf_backend_setup_gnu_properties,
elf_backend_merge_gnu_properties and elf_backend_parse_gnu_properties.
2) It defines AArch64 specific GNU property
GNU_PROPERTY_AARCH64_FEATURE_1_AND and 2 bit for BTI and PAC in it.
3) It also adds support in readelf.c to read and print these new
GNU properties in AArch64.
All these are made according to the new AArch64 ELF ABI
https://developer.arm.com/docs/ihi0056/latest/elf-for-the-arm-64-bit-architecture-aarch64-abi-2018q4
*** bfd/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* elf-properties.c (_bfd_elf_link_setup_gnu_properties): Exclude
linker created inputs from merge.
* elfnn-aarch64.c (struct elf_aarch64_obj_tdata): Add field for
GNU_PROPERTY_AARCH64_FEATURE_1_AND properties.
(elfNN_aarch64_link_setup_gnu_properties): New.
(elfNN_aarch64_merge_gnu_properties): New.
(elf_backend_setup_gnu_properties): Define for AArch64.
(elf_backend_merge_gnu_properties): Likewise.
* elfxx-aarch64.c (_bfd_aarch64_elf_link_setup_gnu_properties): Define.
(_bfd_aarch64_elf_parse_gnu_properties): Define.
(_bfd_aarch64_elf_merge_gnu_properties): Define.
* elfxx-aarch64.h (_bfd_aarch64_elf_link_setup_gnu_properties): Declare.
(_bfd_aarch64_elf_parse_gnu_properties): Declare.
(_bfd_aarch64_elf_merge_gnu_properties): Declare.
(elf_backend_parse_gnu_properties): Define for AArch64.
*** binutils/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* readelf.c (decode_aarch64_feature_1_and): New.
(print_gnu_property_note): Add case for AArch64 gnu notes.
*** include/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* elf/common.h (GNU_PROPERTY_AARCH64_FEATURE_1_AND): New.
(GNU_PROPERTY_AARCH64_FEATURE_1_BTI): New.
(GNU_PROPERTY_AARCH64_FEATURE_1_PAC): New.
*** ld/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* NEWS: Document GNU_PROPERTY_AARCH64_FEATURE_1_BTI and
GNU_PROPERTY_AARCH64_FEATURE_1_PAC.
* testsuite/ld-aarch64/aarch64-elf.exp: Add run commands for new tests.
* testsuite/ld-aarch64/property-bti-pac1.d: New test.
* testsuite/ld-aarch64/property-bti-pac1.s: New test.
* testsuite/ld-aarch64/property-bti-pac2.d: New test.
* testsuite/ld-aarch64/property-bti-pac2.s: New test.
* testsuite/ld-aarch64/property-bti-pac3.d: New test.
Compressed debug sections can have uncompressed sizes that exceed the
original file size, so we can't use bfd_get_file_size. objdump also
used bfd_get_file_size to limit reloc section size, but I believe the
underlying bug causing the PR22508 out of bounds buffer access was
that we had an integer overflow when calculating the reloc buffer
size. I've fixed that instead in most of the backends, som and
vms-alpha being the exceptions. SOM and vmd-alpha have rather more
serious bugs in their slurp_relocs routines that would need fixing
first if we want to fuss about making them safe against fuzzed object
files.
The patch also fixes a number of other potential overflows by using
the bfd_alloc2/malloc2/zalloc2 memory allocation functions.
bfd/
* coffcode.h (buy_and_read): Delete unnecessary forward decl. Add
nmemb parameter. Use bfd_alloc2.
(coff_slurp_line_table): Use bfd_alloc2. Update buy_and_read calls.
Delete assertion.
(coff_slurp_symbol_table): Use bfd_alloc2 and bfd_zalloc2.
(coff_slurp_reloc_table): Use bfd_alloc2. Update buy_and_read calls.
* coffgen.c (coff_get_reloc_upper_bound): Ensure size calculation
doesn't overflow.
* elf.c (bfd_section_from_shdr): Use bfd_zalloc2. Style fix.
(assign_section_numbers): Style fix.
(swap_out_syms): Use bfd_malloc2.
(_bfd_elf_get_reloc_upper_bound): Ensure size calculation doesn't
overflow.
(_bfd_elf_make_empty_symbol): Style fix.
(elfobj_grok_stapsdt_note_1): Formatting.
* elfcode.h (elf_object_p): Use bfd_alloc2.
(elf_write_relocs, elf_write_shdrs_and_ehdr): Likewise.
(elf_slurp_symbol_table): Use bfd_zalloc2.
(elf_slurp_reloc_table): Use bfd_alloc2.
(_bfd_elf_bfd_from_remote_memory): Use bfd_malloc2.
* elf64-sparc (elf64_sparc_get_reloc_upper_bound): Ensure
size calculation doesn't overflow.
(elf64_sparc_get_dynamic_reloc_upper_bound): Likewise.
* mach-o.c (bfd_mach_o_get_reloc_upper_bound): Likewise.
* pdp11.c (get_reloc_upper_bound): Copy aoutx.h version.
binutils/
* objdump.c (load_specific_debug_section): Don't compare section
size against file size.
(dump_relocs_in_section): Don't compare reloc size against file size.
Print "failed to read relocs" on bfd_get_reloc_upper_bound error.
Committed on behalf of Matthew Malcomson.
This allows checking the command line parsing more easily than before by
allowing many command line invokations from the same .d file.
Each line is used as a set of flags, and the tests are ran against the output
of the assembler with each set.
Each line of assembler is treated as another set of tests (as if the test file
were copied to another with a different #as: line).
This patch includes some example uses where multiple testcases can be merged
into one file using this new functionality.
binutils/ChangeLog:
* testsuite/lib/binutils-common.exp: Allow multiple "as" lines.
gas/ChangeLog:
* testsuite/gas/aarch64/dotproduct.d: Use multiple "as" lines.
* testsuite/gas/aarch64/dotproduct_armv8_4.d: Remove.
* testsuite/gas/aarch64/dotproduct_armv8_4.s: Remove.
* testsuite/gas/aarch64/illegal-dotproduct.d: Use multiple "as"
lines.
* testsuite/gas/aarch64/ldst-rcpc-armv8_2.d: Remove.
* testsuite/gas/aarch64/ldst-rcpc.d: Use multiple "as" lines.
* objdump.c (sym_ok): New function.
(find_symbol_for_address): Use new function.
(disassemble_section): Compare sections by name, not pointer.
(dump_dwarf): Move code to initialise byte_get pointer and iterate
over separate debug files from here to ...
(dump_bfd): ... here. Add parameter indicating that a separate
debug info file is being dumped. For main file, pull in the
symbol tables from all separate debug info files.
(display_object): Update call to dump_bfd.
* doc/binutils.texi: Document extened behaviour of the
--dwarf=follow-links option.
* NEWS: Mention this new feature.
* testsuite/binutils-all/objdump.WK2: Update expected output.
* testsuite/binutils-all/objdump.exp (test_follow_debuglink): Add
options and dump file parameters.
Add extra test.
* testsuite/binutils-all/objdump.WK3: New file.
* testsuite/binutils-all/readelf.exp: Change expected output for
readelf -wKis test.
* testsuite/binutils-all/readelf.wKis: New file.
PR 23843
* dwarf.h (struct separate_info): New structure for containing
information on separate debug info files.
* dwarf.c (struct dwo_info): New structure for containing dwo
links.
(first_dwo_info): Chain of dwo_info structures.
(first_separate_file): Chain of separate_info structures.
(separate_debug_file, separate_debug_filename): Delete.
(fetch_alt_indirect_string): Scan all separate debug info files
for the requested string.
(add_dwo_info): New function.
(add_dwo_name): New function.
(add_dwo_dir): New function.
(add_dwo_id: New function.
(free_dwo_info): New function.
(read_and_display_attr_value): Store DWO data using the new
functions.
(load_debug_section_with_follow): If necessary, scan the list of
separate debug info files for the requested section.
(add_separate_debug_file): New function.
(load_separate_debug_info): Call add_separate_debug_file to store
the information on the newly loaded file.
(load_dwo_file): Likewise.
(load_separate_debif_file): Rename to load_separate_debug_files.
Change return type to boolean. If following links then attempt to
load all separate debug info files, not just the first one.
(free_debug_memory): Release memory in dwo_info and separate_info
chains.
* objdump.c (dump_dwarf): Iterate over all loaded debg info files.
* readelf.c (process_object): Likewise.
* doc/debug.options.texi: Update descriptions of links and
follow-links options.
* testsuite/binutils-all/objdump.WK2: Update expected output.
* testsuite/binutils-all/readelf.k2: Likewise.
* NEWS: Announce the new feature.
PR 24244
* unwind-ia64.c (unw_decode_uleb128): Add end parameter, use it to
prevent walking off the end of the buffer.
(unw_decode_x1): Add end paramter, pass it to unw_decode_uleb128.
(unw_decode_x2): Likewise.
(unw_decode_x3): Likewise.
(unw_decode_x4): Likewise.
(unw_decode_r2): Pass the end parameter to unw_decode_uleb128.
(unw_decode_r3): Likewise.
(unw_decode_p7_p10): Likewise.
(unw_decode_b2): Likewise.
(unw_decode_b3_x4): Likewise.
PR 24132
PR 24138
* readelf.c (get_data): Avoid possibility of overflow when
checking for a read that may extend past end of file.
(process_program_headers): Likewise.
The size tool currently defaults to berkeley format output. However,
this output format has a weird quirk, read-only data is counted
against the text sections, not the data sections.
The code offers no real explanation for why this is, but I'm reluctant
to change it for two reasons, first, I'm assuming it probably makes
sense in some case that I'm not thinking of (maybe a target where
sections are not marked executable, and so there's no distinction
between read-only data and code), and second, the code has been this
way for at least 20 years, I worry that changing things now might
cause more confusion than it solves.
This commit then introduces a new output format for the size tool,
this new format displays the results in a similar manor to the
berkeley format, but counts read-only data in the data column, and
only executable sections are counted in the text column.
Given that this is a brand new output format I've gone ahead and
simplified things a little, while the berkeley format displays the
total twice, once in decimal and once in hex, the new display format
just displays the total in decimal. Of course, there's still the
'--radix' option which can be used to display all the results in
hexadecimal or octal.
I've called the new format 'gnu', so '--format=gnu' or '-G' are used
to access it.
binutils/ChangeLog:
* size.c (berkeley_format): Delete.
(enum output_format): New enum.
(selected_output_format): New variable.
(usage): Update to mention GNU format.
(main): Update to extract options, and select format as needed.
Handle GNU format where needed.
(berkeley_sum): Renamed to...
(berkeley_or_gnu_sum): ...this, and updated to handle both formats.
(berkeley_format): Renamed to...
(berkeley_or_gnu_format): ...this, and updated to handle both
formats.
(print_sizes): Handle GNU format.
* doc/binutils.texi (size): Document new GNU format.
* testsuite/binutils-all/size.exp: Add test of extended
functionality.
* NEWS: Mention new functionality.
The example output from size in Berkeley format is out of date. The
columns are now displayed right aligned. This patch updates the
documentation to reflect reality.
binutils/ChangeLog:
* doc/binutils.texi (size): Update example output for Berkeley
format output.
bfd * config.bfd: Move the powerpc-lynxos and powerpc-windiss targets
into the definitely obsolete list.
binutils * README-how-to-make-a-release: Add a note about updating the
obsolete targets in the bfd/config.bfd file.
PR 24131
* readelf.c (process_notes_at): Prevent an illegal memory access
when the note's namesize is zero.
(decode_tic6x_unwind_bytecode): Add code to handle the case where
no registers are specified in a frame pop instruction.
* objdump.c (disassemble_section): When disassembling from a
symbol only stop at the next symbol if the original symbol was not
a function symbol. Otherwise continue disassembling until a new
function is reached.
* testsuite/binutils-all/objdump.exp: Add tests of extended
functionality.
* testsuite/binutils-all/disasm.s: New test source file.
PR 24044
* cxxfilt.c (hp_symbol_characters): Delete.
(main): Remove depcreated demangling styles.
* stabs.c (parse_stab_argtypes): Remove support for old gnu v2
demangling opnames.
* testsuite/binutils-all/cxxfilt.exp: Use the
--no-strip-underscore option for targets that do prefix their
symbols with underscores.
Update tests to elimiate those that use gnu v2 encoding.
This adds a new testcase for objcopy -O ihex to test
that it correctly works.
binutils/ChangeLog:
PR 24065
* testsuite/binutils-all/copy-6.d: New test.
* testsuite/binutils-all/objcopy.exp: Use it.
The previous commit breaks the GDB build, which is still using functions
cplus_demangle_opname & co. Since removing these usages is not an
obvious fix, let's revert this patch until we get rid of them.
PR 24044
* stabs.c (parse_stab_argtypes): Remove call to
cplus_mangle_opcode.
* testsuite/binutils-all/cxxfilt.exp: Replace tests of v2 encoding
with v3 encoding. Add escape for known failures.
PR 24001
* objcopy.c (copy_object): Free dhandle after writing out the
debug information.
* objdump.c (dump_bfd): Free dhandle after printing out the debug
information.
Linkers group input note sections with the same name into one output
note section with the same name. One output note section is placed in
one PT_NOTE segment. New linkers merge all input .note.gnu.property
sections into one output .note.gnu.property section with a single
NT_GNU_PROPERTY_TYPE_0 note in a single PT_NOTE segment. Since older
linkers treat input .note.gnu.property section as a generic note section
and just concatenate all input .note.gnu.property sections into one
output .note.gnu.property section without merging them, we may
see one or more NT_GNU_PROPERTY_TYPE_0 notes in PT_NOTE segment, which
are invalid.
GNU_PROPERTY_X86_UINT32_VALID was defined to address this issue such
that linker sets the bit for non-relocatable outputs. But it isn't
sufficient:
1. It doesn't cover generic properties.
2. When -mx86-used-note=yes is passed to x86 assembler, the
GNU_PROPERTY_X86_UINT32_VALID bit is set in GNU_PROPERTY_X86_ISA_1_USED
property in object file and older linkers generate invalid
NT_GNU_PROPERTY_TYPE_0 notes with the GNU_PROPERTY_X86_UINT32_VALID bit
set.
I am proposing the following changes:
1. Add PT_GNU_PROPERTY segment type:
# define PT_GNU_PROPERTY (PT_LOOS + 0x474e553)
which covers .note.gnu.property section.
2. Remove GNU_PROPERTY_X86_UINT32_VALID.
bfd/
PR ld/23900
* elf.c (get_program_header_size): Add a PT_GNU_PROPERTY
segment for NOTE_GNU_PROPERTY_SECTION_NAME.
(_bfd_elf_map_sections_to_segments): Create a PT_GNU_PROPERTY
segment for NOTE_GNU_PROPERTY_SECTION_NAME.
* elfxx-x86.c (_bfd_elf_link_setup_gnu_properties): Don't set
GNU_PROPERTY_X86_UINT32_VALID.
binutils/
PR ld/23900
* readelf.c (get_segment_type): Support PT_GNU_PROPERTY.
(decode_x86_isa): Don't check GNU_PROPERTY_X86_UINT32_VALID.
(decode_x86_feature_1): Likewise.
(decode_x86_feature_2): Likewise.
(print_gnu_property_note): Remove GNU_PROPERTY_X86_UINT32_VALID
check.
* testsuite/binutils-all/i386/empty.d: Updated.
* testsuite/binutils-all/x86-64/empty-x32.d: Likewise.
* testsuite/binutils-all/x86-64/empty.d: Likewise.
* testsuite/binutils-all/i386/pr21231b.s: Change
GNU_PROPERTY_X86_ISA_1_USED bits to 0x7fffffff.
* testsuite/binutils-all/x86-64/pr21231b.s: Likewise.
gas/
PR ld/23900
* config/tc-i386.c (x86_cleanup): Don't set
GNU_PROPERTY_X86_UINT32_VALID.
* testsuite/gas/i386/property-1.s: Change
GNU_PROPERTY_X86_ISA_1_USED bits to 0.
include/
PR ld/23900
* elf/common.h (PT_GNU_PROPERTY): New.
(GNU_PROPERTY_X86_UINT32_VALID): Removed.
ld/
PR ld/23900
* testsuite/ld-elf/elf.exp: Run PR ld/23900 test.
* testsuite/ld-elf/pr23900-1-32.rd: New file.
* testsuite/ld-elf/pr23900-1-64.rd: Likewise.
* testsuite/ld-elf/pr23900-1.d: Likewise.
* testsuite/ld-elf/pr23900-1.s: Likewise.
* testsuite/ld-elf/pr23900-2.s: Likewise.
* testsuite/ld-elf/pr23900-2a.d: Likewise.
* testsuite/ld-elf/pr23900-2b.d: Likewise.
* testsuite/ld-i386/ibt-plt-1.d: Adjusted.
* testsuite/ld-i386/ibt-plt-2c.d: Likewise.
* testsuite/ld-i386/ibt-plt-2d.d: Likewise.
* testsuite/ld-i386/ibt-plt-3d.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d.d: Likewise.
* testsuite/ld-i386/pr23372c.d: Expect <None>
for GNU_PROPERTY_X86_ISA_1_USED.
* testsuite/ld-x86-64/pr23372c-x32.d: Likewise.
* testsuite/ld-x86-64/pr23372c.d: Likewise.
* testsuite/ld-x86-64/pr23372d-x32.d: Likewise.
* testsuite/ld-x86-64/pr23372d.d: Likewise.
* testsuite/ld-x86-64/property-x86-5a.s: Change
GNU_PROPERTY_X86_ISA_1_USED bits to 0.
* testsuite/ld-x86-64/property-x86-5b.s: Likewise.
PR 88409
include * demangle.h (DEMANGLE_RECURSION_LIMIT): Increase to 2048.
binutils* NEWS: Note that recursion limit has increased to 2048.
* doc/binutils.texi: Likewise.
git commit 71f5e3f7b6 obviously wasn't tested on a big-endian host,
and the test fail message resulted in tcl errors.
* strings.c (unget_part_char): New function.
(print_strings): Use unget_part_char. Formatting.
* testsuite/binutils-all/strings.exp (test_multibyte): Don't
use square brackets in fail message. Expect "String1\nString2".
bfd/
PR 23952
* syms.c (_bfd_generic_read_minisymbols): Free syms before
returning with zero symcount.
binutils/
* nm.c (display_rel_file): Use xrealloc to increase minisyms
for synthetic symbols.
This patch addresses the multitude of bug reports about resource exhaustion
in libiberty's name demangling code. It adds a limit to the amount of
recursion that is allowed, before an error is triggered. It also adds a
new demangling option to disable this limit. (The limit is enabled by
default).
PR 87681
PR 87675
PR 87636
PR 87335
libiberty * cp-demangle.h (struct d_info): Add recursion_limit field.
* cp-demangle.c (d_function_type): If the recursion limit is
enabled and reached, return with a failure result.
(d_demangle_callback): If the recursion limit is enabled, check
for a mangled string that is so long that there is not enough
stack space for the local arrays.
* cplus-dem.c (struct work): Add recursion_level field.
(demangle_nested_args): If the recursion limit is enabled and
reached, return with a failure result.
include * demangle.h (DMGL_RECURSE_LIMIT): Define.
(DEMANGLE_RECURSION_LIMIT): Prototype.
binutuils * addr2line.c (demangle_flags): New static variable.
(long_options): Add --recurse-limit and --no-recurse-limit.
(translate_address): Pass demangle_flags to bfd_demangle.
(main): Handle --recurse-limit and --no-recurse-limit options.
* cxxfilt.c (flags): Add DMGL_RECURSE_LIMIT.
(long_options): Add --recurse-limit and --no-recurse-limit.
(main): Handle new options.
* dlltool.c (gen_def_file): Include DMGL_RECURSE_LIMIT in flags
passed to cplus_demangle.
* nm.c (demangle_flags): New static variable.
(long_options): Add --recurse-limit and --no-recurse-limit.
(main): Handle new options.
* objdump.c (demangle_flags): New static variable.
(usage): Add --recurse-limit and --no-recurse-limit.
(long_options): Likewise.
(objdump_print_symname): Pass demangle_flags to bfd_demangle.
(disassemble_section): Likewise.
(dump_dymbols): Likewise.
(main): Handle new options.
* prdbg.c (demangle_flags): New static variable.
(tg_variable): Pass demangle_flags to demangler.
(tg_start_function): Likewise.
* stabs.c (demangle_flags): New static variable.
(stab_demangle_template): Pass demangle_flags to demangler.
(stab_demangle_v3_argtypes): Likewise.
(stab_demangle_v3_arg): Likewise.
* doc/binutuls.texi: Document new command line options.
* NEWS: Mention the new feature.
* testsuite/config/default.exp (CXXFILT): Define if not already
defined.
(CXXFILTFLAGS): Likewise.
* testsuite/binutils-all/cxxfilt.exp: New file. Runs a few
simple tests of the cxxfilt program.
PR 23945
* readelf.c (slurp_ia64_unwind_table): Don't call elf_ia64_reloc_type
needlessly.
(slurp_hppa_unwind_table): Use same range checks and error messages
as slurp_ia64_unwind_table.
PR 23931
* objdump.c (dump_relocs_in_section): When checking for an
unreasonable amount of relocs in a bfd, allow for the fact that
the internal representation of a reloc may be bigger than the
external representation.
PR binutils/23919
binutils* readelf.c (dump_sections_as_strings): Remove bogus addralign check.
(dump_sections_as_bytes): Likewise.
(load_specific_debug_sections): Likewise.
* testsuite/binutils-all/dw2-3.rS: Adjust alignment.
* testsuite/binutils-all/dw2-3.rt: Likewise.
bfd * bfd.c (bfd_update_compression_header): Explicitly set alignment.
(bfd_check_compression_header): Add uncompressed_alignment_power
argument. Check ch_addralign is a power of 2.
* bfd-in2.h: Regenerated.
* compress.c (bfd_compress_section_contents): Get and set
orig_uncompressed_alignment_pow if section is decompressed.
(bfd_is_section_compressed_with_header): Add and get
uncompressed_align_pow_p argument.
(bfd_is_section_compressed): Add uncompressed_align_power argument
to bfd_is_section_compressed_with_header call.
(bfd_init_section_decompress_status): Get and set
uncompressed_alignment_power.
* elf.c (_bfd_elf_make_section_from_shdr): Add
uncompressed_align_power argument to
bfd_is_section_compressed_with_header call.
Since some object files may not have build notes, it is normal to have
gaps in build notes.
PR binutils/23898
* testsuite/lib/binutils-common.exp (prune_warnings_extra):
Prune gaps in build notes.
The decoding of the CRC operation in alu instructions was using bits
from the instruction word directly, instead of srcA which would be
different if the swap bit was set.
Signed-off-by: Francois H. Theron <francois.theron@netronome.com>
* strings.c (print_strings): Check for multibyte encodings.
* binutils-all/strings-1.bin: New file. Test binary for string decoding.
* testsuite/binutils-all/strings.exp: New file. Test the strings program.
* testsuite/config/default.exp (STRINGS): Define if not provided
by the environment.
(STRINGSFLAGS): Likewise.
* objdump.c (long_options): Have the --disassemble option take an
optional argument.
(usage): Add description for the `symbol' argument to the
--disassemble option.
(disasm_sym): New file private variable.
(struct objdump_disasm_info): New field `symbol'.
(disassemble_section): Introduce `do_print' local variable
to control whether objdump displays the result of disassembling
for a symbol or not.
(main): Set `symbol' file private variable if the option argument
for the --disassemble option is given.
* doc/binutils.texi (objdump): Add description for the option
argument.
* NEWS: Mention the new feature.
* testsuite/binutils-all/objdump.exp: Add tests of the -d and
--disassemble=<symbol> options.
* testsuite/binutils-all/bintest.s: Add more symbols and code.
* testsuite/binutils-all/readelf.s: Update expected output.
* testsuite/binutils-all/readelf.ss-64: Likewise.
* testsuite/binutils-all/readelf.ss-mips: Likewise.
* testsuite/binutils-all/readelf.ss-tmips: Likewise.
bfd * mach-o.h: Add new enums for BFD_MACH_O_PLATFORM_MACOS,
BFD_MACH_O_PLATFORM_IOS, BFD_MACH_O_PLATFORM_TVOS,
BFD_MACH_O_PLATFORM_WATCHOS, BFD_MACH_O_PLATFORM_BRIDGEOS,
BFD_MACH_O_TOOL_CLANG, BFD_MACH_O_TOOL_SWIFT, BFD_MACH_O_TOOL_LD.
(struct bfd_mach_o_note_command): New.
(struct bfd_mach_o_build_version_tool): New.
(struct bfd_mach_o_build_version_command): New.
(bfd_mach_o_read_version_min): Don't split version into
a few fields. Rename reserved to sdk.
* mach-o.c (bfd_mach_o_read_version_min): Don't split version into a
few fields. Rename reserved to sdk.
(bfd_mach_o_read_command): Handle LC_VERSION_MIN_TVOS, LC_NOTE,
LC_BUILD_VERSION.
(bfd_mach_o_read_note): New.
(bfd_mach_o_read_build_version): New.
PR 23728
binutils* od-macho.c (printf_version): New.
(dump_load_command): Use it to print version. Print sdk version. Print
version info for watchOS and tvOS. Print LC_NOTE, LC_BUILD_VERSION.
(dump_buld_version): New.
(bfd_mach_o_platform_name): New
(bfd_mach_o_tool_name): New
* mach-o/external.h (mach_o_nversion_min_command_external): Rename
reserved to sdk.
(mach_o_note_command_external): New.
(mach_o_build_version_command_external): New.
* mach-o/loader.h (BFD_MACH_O_LC_VERSION_MIN_TVOS): Define.
(BFD_MACH_O_LC_NOTE): Define.
Add --enable-x86-feature and --disable-x86-feature options to elfedit
to set and clear the IBT and SHSTK bits in program property in ELF
executables and shared objects.
binutils/
* doc/binutils.texi: Document --enable-x86-feature and
--disable-x86-feature options for elfedit.
* elfedit.c: Include "config.h" and <sys/mman.h>.
(enable_x86_features): New.
(disable_x86_features): Likewise.
(update_gnu_property): Likewise.
(elf_x86_feature): Likewise.
(process_file): Call update_gnu_property on ET_EXEC or ET_DYN
file.
(command_line_switch): Add OPTION_ENABLE_X86_FEATURE and
OPTION_DISABLE_X86_FEATURE.
(options): Add--enable-x86-feature and --disable-x86-feature.
(usage): Likewise.
(main): Handle OPTION_ENABLE_X86_FEATURE and
OPTION_DISABLE_X86_FEATURE.
ld/
* testsuite/config/default.exp (ELFEDIT): New.
* testsuite/ld-elf/linux-x86.exp (elfedit_test): New proc.
Run elfedit tests.
* testsuite/ld-elf/x86-feature-1a.rd: New file.
* testsuite/ld-elf/x86-feature-1b.rd: Likewise.
* testsuite/ld-elf/x86-feature-1c.rd: Likewise.
* testsuite/ld-elf/x86-feature-1d.rd: Likewise.
* testsuite/ld-elf/x86-feature-1e.rd: Likewise.
Add AC_FUNC_MMAP to configure.ac so that HAVE_MMAP will be checked in
objdump.c and mmap is used if available.
* configure.ac (AC_FUNC_MMAP): New.
* config.in: Regenerated.
* configure: Likewise.
On readelf examining a static executable built with current glibc,
we get a silly warning.
Section Headers:
[Nr] Name Type Address Off Size ES Flg Lk Inf Al
[ 0] NULL 0000000000000000 000000 000000 00 0 0 0
[ 1] .note.ABI-tag NOTE 0000000000400190 000190 000020 00 A 0 0 4
[ 2] .note.gnu.build-id NOTE 00000000004001b0 0001b0 000024 00 A 0 0 4
readelf: Warning: [ 3]: Link field (0) should index a symtab section.
[ 3] .rela.plt RELA 00000000004001d8 0001d8 000228 18 AI 0 20 8
This .rela.plt section contains only IRELATIVE relocations (which have
symbol index zero), so it isn't appropriate to warn. A zero sh_link
section is deliberately chosen for such a section (see PR10337 and
PR23850).
So this patch disables the SHT_REL* sh_link warning. I've also
removed the .rel.dyn/.rela.dyn section name test to disable the
sh_info warning for SHT_REL* sections. While relocation sections in
an executable need not specify the section they relocate (the
relocation sh_offset field is an address, not a section offset), that
isn't true in a relocatable file where sh_offset is relative to a
section. If .rela.dyn happens to exist in an ET_REL object it must
specify a valid section.
* readelf.c (process_section_headers): Don't warn on a zero
sh_info or sh_link for any reloc section in an executable or
shared library. Do warn for .rel.dyn/.rela.dyn in ET_REL.
run_dump_test proposes an ld action but when trying to make use of it in
a gas test it gave me some Tcl error. It turns out that it references
the check_shared_lib_support procedure and ld_elf_shared_opt variable
both only available in ld-lib.exp. I've thus moved the procedure in
binutils-common.exp and defined the variable needed in the various
default.exp of testsuite that seem to be using run_dump_test.
Since check_shared_lib_support itself references the ld variable not
defined in binutils-common I've defined it from LD in run_dump_test and
fixed LD and LDFLAGS to be defined as expected by run_dump_test in the
various default.exp of testsuite using run_dump_test.
2018-11-01 Thomas Preud'homme <thomas.preudhomme@linaro.org>
binutils/
* testsuite/config/default.exp: Define LD, LDFLAGS and
ld_elf_shared_opt.
* testsuite/lib/binutils-common.exp (check_shared_lib_support): Moved
from ld-lib.exp.
(run_dump_test): Set ld to $LD.
gas/
* testsuite/config/default.exp: Define LD, LDFLAGS and
ld_elf_shared_opt.
ld/
* testsuite/lib/ld-lib.exp (check_shared_lib_support): Moved to
binutils-common.exp.
Third party tools produce 32 bit relocs at index 6 with strange properties.
This change moves the existing 32 bit reloc (R_S12Z_EXT32) to index 7
and introduces a new one (R_S12Z_CW32) at index 6 to try to support code
generated by these tools.
* bfd/elf32-s12z.c (elf_s12z_howto_table) [R_S12Z_CW32]: New member.
* binutils/readelf.c (is_32bit_abs_reloc): Reloc type 7 is also 32 bit.
* include/elf/s12z.h (elf_s12z_reloc_tpe) [RELOC_NUMBER (R_S12Z_CW32)]: New enum.
This patch performs a run-time test that a shared libbfd.so has been
compiled with the same size bfd_vma as that of apps using the library.
On a 32-bit host it is easily possible to have one libbfd.so compiled
to support 64-bit targets (or configured with --enable-64-bit-bfd)
while another only supports 32-bit targets. The two libraries will
have differently sized bfd_vma types, and if the wrong one is loaded
all sorts of weird behaviour might be seen.
bfd/
PR 23534
* init.c (BFD_INIT_MAGIC): Define.
(bfd_init): Return BFD_INIT_MAGIC.
bfd-in2.h: Regenerate.
binutils/
PR 23534
* addr2line.c (main): Exit with fatal error if bfd_init
returns an unexpected value.
* ar.c (main): Likewise.
* dlltool.c (identify_dll_for_implib): Likewise.
* nm.c (main): Likewise.
* objcopy.c (main): Likewise.
* objdump.c (main): Likewise.
* size.c (main): Likewise.
* strings.c (main): Likewise.
* windmc.c (main): Likewise.
* windres.c (main): Likewise.
gas/
PR 23534
* as.c (main): Exit with fatal error if bfd_init returns an
unexpected value.
ld/
PR 23534
* ldmain.c (main): Exit with fatal error if bfd_init returns
an unexpected value.
This is the result of an email thread starting here:
https://sourceware.org/ml/binutils/2018-09/msg00031.html
The main point of the thread is this observation:
* Supposing we had an object file with two globals, SomeGlobal and
SomeOtherGlobal, if one were to do "--globalize-symbol SomeGlobal
--keep-global-symbol SomeOtherGlobal", you might expect that both
SomeGlobal and SomeOtherGlobal are global in the output file... but it
isn't. Because --keep-global-symbol is set and doesn't include
SomeGlobal, SomeGlobal will be demoted to a local symbol. And because
the check to see if we should apply the --globalize-symbol flag checks
"flags" (the original flag set), and not "sym->flags", it decides not
to do anything, so SomeGlobal remains a local symbol. Although this is
a weird edge case, should this be changed so that --keep-global-symbol
implicitly keeps anything also specified via --globalize-symbol? (The
code seems technically correct with respect to the documentation, but
IMO the behavior is counter-intuitive).
binutils* objcopy.c (copy_main): Issue a fata error if the
--keep-global-symbol(s) and the --globalize-symbol(s) options are
used together.
* doc/binutils.texi: Document that the two options are
incompatible.
* testsuite/binutils-all/copy-5.d: New test.
* testsuite/binutils-all/objcopy.exp: Run the new test.
.PARISC.unwind has 32-bit addresses in both 32-bit ELF and 64-bit ELF.
Well, strictly speaking, the 32-bit "start" and "end" fields are
segment relative offsets. (The 64-bit ABI says so, while the 32-bit
ABI says they are addresses but it appears they are segment relative
offsets in practice. Likely the 32-bit ABI lacks an update.)
* readelf.c (hppa_process_unwind): Don't use eh_addr_size to
calculate number of entries.
(slurp_hppa_unwind_table): Don't use eh_addr_size here either.
echo "__thread char *p;" | gcc -c -g -xc - -o thread.o
With current powerpc64le-linux-gcc has this reloc in .debug_info
0000000000000025 0000000d0000004e R_PPC64_DTPREL64 0000000000000000 p + 8000
That stops me looking at .debug_info.
~/build/gas-virgin/powerpc64le-linux/binutils/readelf -wi thread.o
readelf: Warning: unable to apply unsupported reloc type 78 to section .debug_info
Older readelf continued on after the warning, dumping .debug_info.
* readelf.c (apply_relocations): Don't return FALSE for warnings.
binutils/
* dwarf.c (display_debug_lines_decoded): Add display of is_stmt.
* testsuite/binutils-all/dw5.W: Deal with the consequences.
* testsuite/binutils-all/objdump.WL: Deal with the consequences.
We have not only removed all unsupported and obsolete code, but also supported lost of new features,
including better link-time relaxations and TLS implementations. Besides, the files generated by the
newly assembler and linker usually get higher performance and more optimized code size.
ld * emultempl/nds32elf.em (hyper_relax): New variable.
(nds32_elf_create_output_section_statements):
the parameters of bfd_elf32_nds32_set_target_option
(PARSE_AND_LIST_PROLOGUE, PARSE_AND_LIST_OPTIONS,
PARSE_AND_LIST_ARGS_CASES): Add new option --mhyper-relax.
* emultempl/nds32elf.em (nds32_elf_after_open): Updated.
* emultempl/nds32elf.em (tls_desc_trampoline): New variable.
* (nds32_elf_create_output_section_statements): Updated.
* (nds32_elf_after_parse): Disable relaxations when PIC is enable.
* (PARSE_AND_LIST_PROLOGUE, PARSE_AND_LIST_OPTIONS,
PARSE_AND_LIST_ARGS_CASES): Add new option --m[no-]tlsdesc-trampoline.
include * elf/nds32.h: Remove the unused target features.
* dis-asm.h (disassemble_init_nds32): Declared.
* elf/nds32.h (E_NDS32_NULL): Removed.
(E_NDS32_HAS_DSP_INST, E_NDS32_HAS_ZOL): New.
* opcode/nds32.h: Ident.
(N32_SUB6, INSN_LW): New macros.
(enum n32_opcodes): Updated.
* elf/nds32.h: Doc fixes.
* elf/nds32.h: Add R_NDS32_LSI.
* elf/nds32.h: Add new relocations for TLS.
gas * config/tc-nds32.c: Remove the unused target features.
(nds32_relax_relocs, md_pseudo_table, nds32_elf_record_fixup_exp,
nds32_set_elf_flags_by_insn, nds32_insert_relax_entry,
nds32_apply_fix): Likewise.
(nds32_no_ex9_begin): Removed.
* config/tc-nds32.c (add_mapping_symbol_for_align,
make_mapping_symbol, add_mapping_symbol): New functions.
* config/tc-nds32.h (enum mstate): New.
(nds32_segment_info_type): Likewise.
* configure.ac (--enable-dsp-ext, --enable-zol-ext): New options.
* config.in: Regenerated.
* configure: Regenerated.
* config/tc-nds32.c (nds32_dx_regs):
Set the value according to the configuration.
(nds32_perf_ext, nds32_perf_ext2, nds32_string_ext, nds32_audio_ext):
Likewise.
(nds32_dsp_ext): New variable. Set the value according to the
configuration.
(nds32_zol_ext): Likewise.
(asm_desc, nds32_pseudo_opcode_table): Make them static.
(nds32_set_elf_flags_by_insn): Updated.
(nds32_check_insn_available): Updated.
(nds32_str_tolower): New function.
* config/tc-nds32.c (relax_table): Updated.
(md_begin): Updated.
(md_assemble): Use XNEW macro to allocate space for `insn.info',
and then remember to free it.
(md_section_align): Cast (-1) to ValueT.
(nds32_get_align): Cast (~0U) to addressT.
(nds32_relax_branch_instructions): Updated.
(md_convert_frag): Add new local variable `final_r_type'.
(invalid_prev_frag): Add new bfd_boolean parameter `relax'.
All callers changed.
* config/tc-nds32.c (struct nds32_relocs_pattern): Add `insn' field.
(struct nds32_hint_map): Add `option_list' field.
(struct suffix_name, suffix_table): Remove the unused `pic' field.
(do_pseudo_b, do_pseudo_bal): Remove the suffix checking.
(do_pseudo_la_internal, do_pseudo_pushpopm): Indent.
(relax_hint_bias, relax_hint_id_current): New static variables.
(reset_bias, relax_hint_begin): New variables.
(nds_itoa): New function.
(CLEAN_REG, GET_OPCODE): New macros.
(struct relax_hint_id): New.
(nds32_relax_hint): For .relax_hint directive, we can use `begin'
and `end' to mark the relax pattern without giving exactly id number.
(nds32_elf_append_relax_relocs): Handle the case that the .relax_hint
directives are attached to pseudo instruction.
(nds32_elf_save_pseudo_pattern): Change the second parameter from
instruction's opcode to byte code.
(nds32_elf_build_relax_relation): Add new bfd_boolean parameter
`pseudo_hint'.
(nds32_lookup_pseudo_opcode): Fix the overflow issue.
(enum nds32_insn_type): Add N32_RELAX_ALU1 and N32_RELAX_16BIT.
(nds32_elf_record_fixup_exp, relax_ls_table, hint_map,
nds32_find_reloc_table, nds32_match_hint_insn, nds32_parse_name):
Updated.
* config/tc-nds32.h (MAX_RELAX_NUM): Extend it to 6.
(enum nds32_relax_hint_type): Merge NDS32_RELAX_HINT_LA and
NDS32_RELAX_HINT_LS into NDS32_RELAX_HINT_LALS. Add
NDS32_RELAX_HINT_LA_PLT, NDS32_RELAX_HINT_LA_GOT and
NDS32_RELAX_HINT_LA_GOTOFF.
* config/tc-nds32.h (relax_ls_table): Add floating load/store
to gp relax pattern.
(hint_map, nds32_find_reloc_table): Likewise.
* configure.ac: Define NDS32_LINUX_TOOLCHAIN.
* configure: Regenerated.
* config.in: Regenerated.
* config/tc-nds32.h (enum nds32_ramp): Updated.
(enum nds32_relax_hint_type): Likewise.
* config/tc-nds32.c: Include "errno.h" and "limits.h".
(relax_ls_table): Add TLS relax patterns.
(nds32_elf_append_relax_relocs): Attach BFD_RELOC_NDS32_GROUP on
each instructions of TLS patterns.
(nds32_elf_record_fixup_exp): Updated.
(nds32_apply_fix): Likewise.
(suffix_table): Add TLSDESC suffix.
binutils* testsuite/binutils-all/objcopy.exp: Set the unsupported reloc number
from 215 to 255 for NDS32.
bfd * elf32-nds32.c (nds32_elf_relax_loadstore):
Remove the unused target features.
(bfd_elf32_nds32_set_target_option): Remove the unused parameters.
(nds32_elf_relax_piclo12, nds32_elf_relax_letlslo12,
nds32_elf_relax_letlsadd, nds32_elf_relax_letlsls,
nds32_elf_relax_pltgot_suff, nds32_elf_relax_got_suff
nds32_elf_relax_gotoff_suff, calculate_plt_memory_address,
calculate_plt_offset, calculate_got_memory_address,
nds32_elf_check_dup_relocs): Removed.
All callers changed.
* elf32-nds32.h: Remove the unused macros and defines.
(elf_nds32_link_hash_table): Remove the unused variable.
(bfd_elf32_nds32_set_target_option): Update prototype.
(nds32_elf_ex9_init): Removed.
* elf32-nds32.c (nds32_convert_32_to_16): Updated.
* elf32-nds32.c (HOWTO2, HOWTO3): Define new HOWTO macros
to initialize array nds32_elf_howto_table in any order
without lots of EMPTY_HOWTO.
(nds32_reloc_map): Updated.
* reloc.c: Add BFD_RELOC_NDS32_LSI.
* bfd-in2.h: Regenerated.
* bfd/libbfd.h: Regenerated.
* elf32-nds32.c (nds32_elf_relax_howto_table): Add R_NDS32_LSI.
(nds32_reloc_map): Likewise.
(nds32_elf_relax_flsi): New function.
(nds32_elf_relax_section): Support floating load/store relaxation.
* elf32-nds32.c (NDS32_GUARD_SEC_P, elf32_nds32_local_gp_offset):
New macro.
(struct elf_nds32_link_hash_entry): New `offset_to_gp' field.
(struct elf_nds32_obj_tdata): New `offset_to_gp' and `hdr_size' fields.
(elf32_nds32_allocate_local_sym_info, nds32_elf_relax_guard,
nds32_elf_is_target_special_symbol, nds32_elf_maybe_function_sym):
New functions.
(nds32_info_to_howto_rel): Add BFD_ASSERT.
(bfd_elf32_bfd_reloc_type_table_lookup, nds32_elf_link_hash_newfunc,
nds32_elf_link_hash_table_create, nds32_elf_relocate_section,
nds32_elf_relax_loadstore, nds32_elf_relax_lo12, nds32_relax_adjust_label,
bfd_elf32_nds32_set_target_option, nds32_fag_mark_relax): Updated.
(nds32_elf_final_sda_base): Improve it to find the better gp value.
(insert_nds32_elf_blank): Must consider `len' when inserting blanks.
* elf32-nds32.h (bfd_elf32_nds32_set_target_option): Update prototype.
(struct elf_nds32_link_hash_table): Add new variable `hyper_relax'.
* elf32-nds32.c (elf32_nds32_allocate_dynrelocs): New function.
(create_got_section): Likewise.
(allocate_dynrelocs, nds32_elf_size_dynamic_sections,
nds32_elf_relocate_section, nds32_elf_finish_dynamic_symbol): Updated.
(nds32_elf_check_relocs): Fix the issue that the shared library may
has TEXTREL entry in the dynamic section.
(nds32_elf_create_dynamic_sections): Enable to call readonly_dynrelocs
since the TEXTREL issue is fixed in the nds32_elf_check_relocs.
(nds32_elf_finish_dynamic_sections): Update and add DT_RELASZ
dynamic entry.
(calculate_offset): Remove the unused parameter `pic_ext_target' and
related codes.
All callers changed.
(elf_backend_dtrel_excludes_plt): Disable it temporarily since it
will cause some errors for our test cases.
* elf32-nds32.c (nds32_elf_merge_private_bfd_data): Allow to link the
generic object.
* reloc.c: Add TLS relocations.
* libbfd.h: Regenerated.
* bfd-in2.h: Regenerated.
* elf32-nds32.h (struct section_id_list_t): New.
(elf32_nds32_lookup_section_id, elf32_nds32_check_relax_group,
elf32_nds32_unify_relax_group, nds32_elf_unify_tls_model):
New prototypes.
(elf32_nds32_compute_jump_table_size, elf32_nds32_local_tlsdesc_gotent):
New macro.
(nds32_insertion_sort, bfd_elf32_nds32_set_target_option,
elf_nds32_link_hash_table): Updated.
* elf32-nds32.c (enum elf_nds32_tls_type): New.
(struct elf32_nds32_relax_group_t, struct relax_group_list_t): New.
(elf32_nds32_add_dynreloc, patch_tls_desc_to_ie, get_tls_type,
fls, ones32, list_insert, list_insert_sibling, dump_chain,
elf32_nds32_check_relax_group, elf32_nds32_lookup_section_id,
elf32_nds32_unify_relax_group, nds32_elf_unify_tls_model): New functions.
(elf_nds32_obj_tdata): Add new fields.
(elf32_nds32_relax_group_ptr, nds32_elf_local_tlsdesc_gotent): New macros.
(nds32_elf_howto_table): Add TLS relocations.
(nds32_reloc_map): Likewise.
(nds32_elf_copy_indirect_symbol, nds32_elf_size_dynamic_sections,
nds32_elf_finish_dynamic_symbol, elf32_nds32_allocate_local_sym_info,
nds32_elf_relocate_section, bfd_elf32_nds32_set_target_option,
nds32_elf_check_relocs, allocate_dynrelocs): Updated.
(nds32_elf_relax_section): Call nds32_elf_unify_tls_model.
(dtpoff_base): Rename it to `gottpof' and then update it.
opcodes * nds32-asm.c (operand_fields): Remove the unused fields.
(nds32_opcodes): Remove the unused instructions.
* nds32-dis.c (nds32_ex9_info): Removed.
(nds32_parse_opcode): Updated.
(print_insn_nds32): Likewise.
* nds32-asm.c (config.h, stdlib.h, string.h): New includes.
(LEX_SET_FIELD, LEX_GET_FIELD): Update defines.
(nds32_asm_init, build_operand_hash_table, build_keyword_hash_table,
build_opcode_hash_table): New functions.
(nds32_keyword_table, nds32_keyword_count_table, nds32_field_table,
nds32_opcode_table): New.
(hw_ktabs): Declare it to a pointer rather than an array.
(build_hash_table): Removed.
* nds32-asm.h (enum): Add SYN_INPUT, SYN_OUTPUT, SYN_LOPT,
SYN_ROPT and upadte HW_GPR and HW_INT.
* nds32-dis.c (keywords): Remove const.
(match_field): New function.
(nds32_parse_opcode): Updated.
* disassemble.c (disassemble_init_for_target):
Add disassemble_init_nds32.
* nds32-dis.c (eum map_type): New.
(nds32_private_data): Likewise.
(get_mapping_symbol_type, is_mapping_symbol, nds32_symbol_is_valid,
nds32_add_opcode_hash_table, disassemble_init_nds32): New functions.
(print_insn_nds32): Updated.
* nds32-asm.c (parse_aext_reg): Add new parameter.
(parse_re, parse_re2, parse_aext_reg): Only reduced registers
are allowed to use.
All callers changed.
* nds32-asm.c (keyword_usr, keyword_sr): Updated.
(operand_fields): Add new fields.
(nds32_opcodes): Add new instructions.
(keyword_aridxi_mx): New keyword.
* nds32-asm.h (enum): Add NASM_ATTR_DSP_ISAEXT, HW_AEXT_ARIDXI_MX
and NASM_ATTR_ZOL.
(ALU2_1, ALU2_2, ALU2_3): New macros.
* nds32-dis.c (nds32_filter_unknown_insn): Updated.
add_specific_symbols allocates a buffer to hold symbols. It should be
freed only if it is no longer in use.
PR binutils/23633
* objcopy.c (strip_specific_buffer): New.
(strip_unneeded_buffer): Likewise.
(keep_specific_buffer): Likewise.
(localize_specific_buffer): Likewise.
(globalize_specific_buffer): Likewise.
(keepglobal_specific_buffer): Likewise.
(weaken_specific_buffer): Likewise.
(add_specific_symbols): Add an argument to return pointer to
allocated buffer.
(copy_main): Update add_specific_symbols to update pointers to
allocated buffer. Free pointers to allocated buffer before
return.
* objcopy.c (handle_remove_section_option): Don't require a dot
after .rela and .rel to handle a possible relocation section.
* testsuite/binutils-all/remove-relocs-07.s,
* testsuite/binutils-all/remove-relocs-07.d,
* testsuite/binutils-all/remove-relocs-08.d: New tests.
* testsuite/binutils-all/remove-relocs-01.d,
* testsuite/binutils-all/remove-relocs-04.d,
* testsuite/binutils-all/remove-relocs-05.d,
* testsuite/binutils-all/remove-relocs-06.d: Exclude mips64-openbsd.
binutils* testsuite/binutils-all/compress.exp: Rename second "objcopy
zlib-gnu compress debug sections 3" test to "objcopy zlib-gabi
compress debug sections 3" and use gabi object files instead
of gnu object files.
* testsuite/binutils-all/objcopy.exp: Add suffix to the names
of the "ELF group" tests.
* testsuite/binutils-all/readelf.exp (proc readelf_find_size):
Add an iteration parameter and include it in the name of the
test. Update callers to include an iteration count.
gas * testuite/gas/elf/group0a.d: Add extra details to the test
name.
* testuite/gas/elf/group0b.d: Likewise.
* testuite/gas/elf/group1a.d: Likewise.
* testuite/gas/elf/group1b.d: Likewise.
* testuite/gas/elf/group0b.d: Likewise.
* testuite/gas/elf/section9.d: Likewise.
* testuite/gas/i386/ilp32/lns/lns-common-1.d: Likewise.
* testuite/gas/i386/ilp32/lns/lns-duplicate-1.d: Likewise.
ld * testuite/ld/ld-elf/audit.exp: Differentiate the names of the
two "Run with shared with --audit" tests.
* testuite/ld/ld-elf/compress.exp: Differentiate the zlib
compressed debug output test names.
* testuite/ld/ld-i386/tlspie1.d: Add extra details to the test
name.
* testuite/ld/ld-i386/tlspie2.d: Likewise.
* testuite/ld/ld-size/size.exp: Add missing escapes to the end
of lines in the size-3e test.
* testuite/ld/ld-unique/unique.exp: Differentiate the names of
the two "Checking unique PIC object" tests.
* testuite/ld/ld-x86-64/tlspie1.d: Add extra details to the test
name.
This merges the three versions of run_dump_test. Improved warning
handling versus the old gas version shows up a number of tests that
need their disassembly updating:
arm-linuxeabi +FAIL: ARM v1 instructions
arm-linuxeabi +FAIL: Accepted v8-a with ARMv8.1 AdvSIMD.
arm-linuxeabi +FAIL: bl local instructions for v4t.
arm-linuxeabi +FAIL: UDF
and some that now fail due to detecting assembly warnings:
h8300-elf +FAIL: binutils-all/strip-13
h8300-elf +FAIL: binutils-all/strip-14
h8300-elf +FAIL: binutils-all/strip-15
I've generally kept the union of all run_dump_test features, except
that the ld target aliases "cfi" and "shared" have disappeared, as has
the binutils substitution of $srcdir as $scrdir/$subdir.
binutils/
* testsuite/binutils-all/add-symbol.d: Add "section_subst: no".
* testsuite/binutils-all/elfedit.exp: Don't set tempfile or copyfile.
* testsuite/binutils-all/symbols-1.d,
* testsuite/binutils-all/symbols-2.d,
* testsuite/binutils-all/symbols-3.d,
* testsuite/binutils-all/symbols-4.d: Quote '*' and '!'.
* testsuite/binutils-all/add-empty-section.d,
* testsuite/binutils-all/add-section.d,
* testsuite/binutils-all/elfedit.exp,
* testsuite/binutils-all/note-1.d,
* testsuite/binutils-all/pr23633.d: Add $subdir after $srcdir.
* testsuite/config/default.exp (AS, ASFLAGS): Define.
* testsuite/config/hppa.sed: Handle all common symbols.
* testsuite/lib/binutils-common.exp (run_dump_test): New proc,
merged from three other versions.
(slurp_options, file_contents, set_file_contents): Likewise.
(big_or_little_endian, get_standard_section_names): Likewise.
* testsuite/lib/utils-lib.exp (run_dump_test): Delete.
(slurp_options, proc file_contents): Delete.
(get_standard_section_names): Delete.
gas/
* testsuite/config/default.exp: Make tmpdir.
* testsuite/lib/gas-defs.exp (run_dump_test): Delete.
(get_standard_section_names, slurp_options): Delete.
ld/
* testsuite/ld-d10v/reloc-007.d,
* testsuite/ld-d10v/reloc-008.d,
* testsuite/ld-d10v/reloc-015.d,
* testsuite/ld-d10v/reloc-016.d: Remove "error:".
* testsuite/ld-elf/eh-frame-hdr.d,
* testsuite/ld-elf/eh5.d,
* testsuite/ld-gc/personality.d: Replace "cfi" and "shared" in
target list with appropriate proc.
* testsuite/ld-elf/frame.exp: Use check_shared_lib_support rather
than "istarget shared".
* testsuite/lib/ld-lib.exp (proc big_or_little_endian): Delete.
(run_dump_test, slurp_options, file_contents): Delete.
(set_file_contents, istarget): Delete.
We have three copies of run_dump_test in the testsuite. This is a first
step towards consolidating them.
A few tests use objcopy to convert to verilog or srec output, then
check that output is as expected. Those tests can just as easily use
objdump, keeping the set of dump programs (addr2line, nm, objdump,
readelf, size) separate from utilities under test. That in turn makes
auto-detecting the dump program possible in more places.
binutils/
* testsuite/binutils-all/group-7a.d,
* testsuite/binutils-all/group-7b.d,
* testsuite/binutils-all/group-7c.d,
* testsuite/binutils-all/symbols-1.d,
* testsuite/binutils-all/symbols-2.d,
* testsuite/binutils-all/symbols-3.d,
* testsuite/binutils-all/symbols-4.d: Remove DUMPPROG.
gas/
* testsuite/gas/mri/char.d: Don't objcopy to srec, objdump instead.
* testsuite/gas/mri/float.d: Likewise.
* testsuite/lib/gas-defs.exp (run_dump_test): Remove support
for objcopy as a dump tool.
ld/
* testsuite/ld-elf/interleave-0.d,
* testsuite/ld-elf/interleave-4.d: Don't objcopy to srec,
objdump instead.
* testsuite/ld-gc/all-debug-sections.d,
* testsuite/ld-scripts/provide-4.d,
* testsuite/ld-scripts/provide-5.d,
* testsuite/ld-scripts/provide-6.d,
* testsuite/ld-scripts/provide-7.d,
* testsuite/ld-scripts/provide-8.d,
* testsuite/ld-scripts/segment-start.d: Remove PROG, specify
nm instead.
* testsuite/lib/ld-lib.exp (run_dump_test): Remove support
for objcopy as a dump tool.
BFD handles ELF relocation sections in an executable differently to
relocation sections in a relocatable object. For a relocatable
object, BFD carries the relocations as data associated with the
section to which they apply; The relocation section doesn't appear as
a separate section. For an executable, dynamic relocation sections do
appear as separate sections. This means that objcopy needs to use
different strategies when dealing with relocations.
When --remove-relocations was added to objcopy with commit
d3e5f6c8f1, objcopy lost the ability to remove dynamic relocation
sections such as .rela.plt from executables using the option
"--remove-section=.rela.plt". This patch reinstates that
functionality.
I thought it best to keep --remove-relocations as is, rather than
extending to handle dynamic relocations as per the patch in the PR,
because executables linked with --emit-relocs may have both dynamic
and non-dynamic relocations. In that case --remove-relocataions=* is
useful to remove all the non-dynamic relocations.
PR binutils/23611
* objcopy.c (handle_remove_section_option): Consider .rela and
.rel sections for stripping directly as well as attached to the
associated section they relocate.
* doc/binutils.texi (remove-relocations): Specify that this
option removes non-dynamic relocation sections.
* testsuite/binutils-all/objcopy.exp
(objcopy_remove_relocations_from_executable): New test.
Since x86 assembler may generate .note.gnu.property section, adjust
binutils tests to handle it.
* testsuite/binutils-all/readelf.s-64: Adjusted for
.note.gnu.property section.
* testsuite/binutils-all/strip-3.d: Also strip
.note.gnu.property section.
Since SHT_FINI_ARRAY and SHT_PREINIT_ARRAY sections are relocatable,
this patch fixes readelf and adds a testcase.
binutils/
* readelf.c (process_section_headers): Treat SHT_FINI_ARRAY and
SHT_PREINIT_ARRAY as relocatable sections.
gas/
* testsuite/gas/elf/elf.exp: Run section14.
* testsuite/gas/elf/section14.d: New file.
* testsuite/gas/elf/section14.s: Likewise.
Since only the GNU_PROPERTY_X86_UINT32_VALID bit may be set in data-only
relocatable objects which don't contain any instructions, linker
shouldn't mask out the GNU_PROPERTY_X86_UINT32_VALID bit when merging
GNU_PROPERTY_X86_XXX bits. Otherwise, linker output doesn't contain
GNU_PROPERTY_X86_XXX property with any data-only relocatable inputs.
This patch keeps the GNU_PROPERTY_X86_UINT32_VALID bit and updates
readelf to print "<None>" if GNU_PROPERTY_X86_XXX property only has
the GNU_PROPERTY_X86_UINT32_VALID bit.
bfd/
* elfxx-x86.c (_bfd_x86_elf_parse_gnu_properties): Don't mask
out the GNU_PROPERTY_X86_UINT32_VALID bit.
binutils/
* readelf.c (decode_x86_isa): Print <None> if bitmask only
contains the GNU_PROPERTY_X86_UINT32_VALID bit.
(decode_x86_feature_1): Likewise.
(decode_x86_feature_2): Likewise.
(print_gnu_property_note): Don't mask out the
GNU_PROPERTY_X86_UINT32_VALID bit.
* testsuite/binutils-all/i386/pr21231b.d: Updated.
* testsuite/binutils-all/x86-64/pr21231b.d: Likewise.
gas/
* testsuite/gas/i386/i386.exp: Run property-1 and
x86-64-property-1.
* testsuite/gas/i386/property-1.d: New file.
* testsuite/gas/i386/property-1.s: Likewise.
* testsuite/gas/i386/x86-64-property-1.d: Likewise.
ld/
* testsuite/ld-i386/i386.exp: Run property-x86-5.
* testsuite/ld-i386/property-x86-5.d: New file.
* testsuite/ld-x86-64/property-x86-5-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-5.d: Likewise.
* testsuite/ld-x86-64/property-x86-5a.s: Likewise.
* testsuite/ld-x86-64/property-x86-5b.s: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run property-x86-5 and
property-x86-5-x32.
The BFD linker with PR ld/23499 may generate shared libraries with
corrupt symbol version info which leads to linker error when the
corrupt shared library is used:
/usr/bin/ld: bin/libKF5Service.so.5.49.0: _edata: invalid version 21 (max 0)
/usr/bin/ld: bin/libKF5Service.so.5.49.0: error adding symbols: bad value
Add check for corrupt symbol version info to objdump:
00000000000af005 g D .data 0000000000000000 <corrupt> _edata
and readelf:
728: 00000000000af005 0 NOTYPE GLOBAL DEFAULT 25 _edata@<corrupt> (5)
bfd/
PR ld/23499
* elf.c (_bfd_elf_get_symbol_version_string): Return
_("<corrupt>") for corrupt symbol version info.
binutils/
PR ld/23499
* readelf.c (get_symbol_version_string): Return _("<corrupt>")
for corrupt symbol version info.
The older linker treats .note.gnu.property section as a generic note
and just concatenates all .note.gnu.property sections from the input
to the output. On CET-enabled OS, the output of the older linker is
marked as CET enabled, but in fact, it is not CET enabled and it crashes
on CET-enabled machines.
This patch defines GNU_PROPERTY_X86_UINT32_VALID. Linker is updated to
set the GNU_PROPERTY_X86_UINT32_VALID bit in GNU property note for
non-relocatable output to differentiate outputs from the older linker.
bfd/
* elfxx-x86.c (_bfd_x86_elf_parse_gnu_properties): Mask out the
GNU_PROPERTY_X86_UINT32_VALID bit.
(_bfd_x86_elf_link_fixup_gnu_properties): Set the
GNU_PROPERTY_X86_UINT32_VALID bit for non-relocatable output.
binutils/
* readelf.c (print_gnu_property_note): Check the
GNU_PROPERTY_X86_UINT32_VALID bit for invalid GNU property note.
include/
* elf/common.h (GNU_PROPERTY_X86_UINT32_VALID): New.
localentry:1 is a valid encoding, so display it. The patch also bails
out of get_ppc64_symbol_other when st_other bits besides the three
used for localentry offsets are set, to avoid hiding any such values.
* readelf.c (get_ppc64_symbol_other): Return NULL if st_other
field contains unrecognised or reserved values. Handle
localentry:1 value.
Fixes a bogus out of range error:
Number of section headers: 0 (210016)
Section header string table index: 1 <corrupt: out of range>
Caused due to e_shnum remaining as zero rather than being updated to
the value from section_header[0].sh_info at the point where we range
check e_shstrndx.
* readelf.c (process_file_header): Assign updated values from
section_header[0] fields to e_phnum, e_shnum and e_shstrndx
during printing of header. Correct e_shstrndx range check.
Remove unnecessary casts and use %u rather than %ld for
unsigned int header fields. Don't print a random %lx when
reporting an unknown EI_VERSION.
The strip-13 test runs into difficulty using dc.a on some targets.
dc.a writes a power of 2 number of bytes large enough to contain a
target address. On some targets, eg. avr-elf, this can be 2 bytes but
the ELF format used require words of 4 bytes to make up a relocation
entry. There was a hack in the test, duplicating the reloc type into
what is normally the addend to make the test work when little-endian,
but that hack fails for similar big-endian targets.
This patch fixes that problem by arranging to emit 32-bit and 64-bit
ELF relocs using .4byte and .8byte directives, chosen as appropriate
for the ELF size. I've also bumped the reloc number tested to a
higher unused value, and made the number more easily parameterised by
target should that be necessary in the future. Whether REL or RELA
relocs are used is now chosen by a new is_rela readelf test of an
object file, rather than by lists of targets.
* testsuite/lib/binutils-common.exp (is_elf64): Use directory of
input file for readelf.out.
(is_rela): New proc.
* testsuite/binutils-all/objcopy.exp (elf64): Set new variable
from first result of is_elf64 test.
(reloc_format): Set using is_rela.
(strip-13): Pass RELOC and ELF64 to assembler.
(strip-14, strip-15): Use elf64 rather than calling is_elf64 again.
* testsuite/binutils-all/strip-13.d: Run for more targets.
* testsuite/binutils-all/strip-13mips64.s: Use RELOC and set
addend to zero.
* testsuite/binutils-all/strip-13rel.s: Use RELOC and ELF64.
Don't add _NONE reloc.
* testsuite/binutils-all/strip-13rela.s: Likewise.
For GNU_PROPERTY_STACK_SIZE, pr_datasz is the same as align_size, which
is 8 bytes for 64-bit ELF binaries and 4 bytes for 32-bit ELF binaries,
Use align_size as pr_datasz for GNU_PROPERTY_STACK_SIZE to convert
.note.gnu.property section.
bfd/
PR binutils/23494
* elf-properties.c (elf_get_gnu_property_section_size): Always
use align_size as pr_datasz for GNU_PROPERTY_STACK_SIZE.
(elf_write_gnu_properties): Likewise.
binutils/
PR binutils/23494
* testsuite/binutils-all/x86-64/pr23494c.s: New file.
* testsuite/binutils-all/x86-64/pr23494e-x32.d: Likewise.
* testsuite/binutils-all/x86-64/pr23494e.d: Likewise.
As indicated by the subject, this patch adds support for the DWARF
expression opcode DW_OP_GNU_variable_value to readelf.
It's pretty much a copy/paste of DW_OP_call_ref with the obvious name
changes for the printf statements. The FIXME comment comes from that
copy/paste.
binutils/ChangeLog:
* dwarf.c (decode_location_expresion): Add case for
DW_OP_GNU_variable_value.
This patch series is a new binutils port for C-SKY processors, including support for both the V1 and V2 processor variants. V1 is derived from the MCore architecture while V2 is substantially different, with mixed 16- and 32-bit instructions, a larger register set, a different (but overlapping) ABI, etc. There is support for bare-metal ELF targets and Linux with both glibc and uClibc.
This code is being contributed jointly by C-SKY Microsystems and Mentor Graphics. C-SKY is responsible for the technical content and has proposed Lifang Xia and Yunhai Shang as port maintainers. (Note that C-SKY does have a corporate copyright assignment on file with the FSF.) Mentor Graphics' role has been cleaning up the code, adding documentation and additional test cases, etc, to address issues we anticipated reviewers would complain about.
bfd * Makefile.am (ALL_MACHINES, ALL_MACHINES_CFILES): Add C-SKY.
(BFD32_BACKENDS, BFD_BACKENDS_CFILES): Likewise.
* Makefile.in: Regenerated.
* archures.c (enum bfd_architecture): Add bfd_arch_csky and
related bfd_mach defines.
(bfd_csky_arch): Declare.
(bfd_archures_list): Add C-SKY.
* bfd-in.h (elf32_csky_build_stubs): Declare.
(elf32_csky_size_stubs): Declare.
(elf32_csky_next_input_section: Declare.
(elf32_csky_setup_section_lists): Declare.
* bfd-in2.h: Regenerated.
* config.bfd: Add C-SKY.
* configure.ac: Likewise.
* configure: Regenerated.
* cpu-csky.c: New file.
* elf-bfd.h (enum elf_target_id): Add C-SKY.
* elf32-csky.c: New file.
* libbfd.h: Regenerated.
* reloc.c: Add C-SKY relocations.
* targets.c (csky_elf32_be_vec, csky_elf32_le_vec): Declare.
(_bfd_target_vector): Add C-SKY target vector entries.
binutils* readelf.c: Include elf/csky.h.
(guess_is_rela): Handle EM_CSKY.
(dump_relocations): Likewise.
(get_machine_name): Likewise.
(is_32bit_abs_reloc): Likewise.
include * dis-asm.h (csky_symbol_is_valid): Declare.
* opcode/csky.h: New file.
opcodes * Makefile.am (TARGET_LIBOPCODES_CFILES): Add csky-dis.c.
* Makefile.in: Regenerated.
* configure.ac: Add C-SKY.
* configure: Regenerated.
* csky-dis.c: New file.
* csky-opc.h: New file.
* disassemble.c (ARCH_csky): Define.
(disassembler, disassemble_init_for_target): Add case for ARCH_csky.
* disassemble.h (print_insn_csky, csky_get_disassembler): Declare.
gas * Makefile.am (TARGET_CPU_CFILES): Add entry for C-SKY.
(TARGET_CPU_HFILES, TARGET_ENV_HFILES): Likewise.
* Makefile.in: Regenerated.
* config/tc-csky.c: New file.
* config/tc-csky.h: New file.
* config/te-csky_abiv1.h: New file.
* config/te-csky_abiv1_linux.h: New file.
* config/te-csky_abiv2.h: New file.
* config/te-csky_abiv2_linux.h: New file.
* configure.tgt: Add C-SKY.
* doc/Makefile.am (CPU_DOCS): Add entry for C-SKY.
* doc/Makefile.in: Regenerated.
* doc/all.texi: Set CSKY feature.
* doc/as.texi (Overview): Add C-SKY options.
(Machine Dependencies): Likewise.
* doc/c-csky.texi: New file.
* testsuite/gas/csky/*: New test cases.
ld * Makefile.am (ALL_EMULATION_SOURCES): Add C-SKY emulations.
(ecskyelf.c, ecskyelf_linux.c): New rules.
* Makefile.in: Regenerated.
* configure.tgt: Add C-SKY.
* emulparams/cskyelf.sh: New file.
* emulparams/cskyelf_linux.sh: New file.
* emultempl/cskyelf.em: New file.
* gen-doc.texi: Add C-SKY.
* ld.texi: Likewise.
(Options specific to C-SKY targets): New section.
* testsuite/ld-csky/*: New tests.
* rdcoff.c (parse_coff_struct_type): Free fields array upon early
exit.
(parse_coff_enum_type): Free names and vals arrays upon early
exit.
* rddbg.c (read_section_stabs_debugging_info): Free shandle and
strings and stabs arrays upon early exit.
* readelf.c (get_32bit_section_headers): Free shdrs structure upon
early exit.
(get_64bit_section_headers): Likewise.
(get_32bit_elf_symbols): Generate an error if multiple symbol
table index sections are associated with the same symbol section.
(get_64bit_elf_symbols): Likewise.
(process_dynamic_section): Generate an error if there are multiple
dynamic symbol table sections, multiple dynamic string tables or
multiple dynamic symbol information sections.
binutils/
* MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV
ISA maintenance.
gdb/
* MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV
ISA maintenance.
sim/
* MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV
ISA maintenance.
* objcopy.c (add_specific_symbols): Free buffer on exit.
(add_redefine_syms_file): Close file handle on exit.
(copy_object): Close file handle on early exit.
Free buffer on early exit.
Free gaps buffers once they are no longer needed.
* dwarf.c (display_debug_frames): Free allocated memory on exit.
(load_separate_debug_info): Free allocate memory on early exit.
The MMI instruction set has been implemented in many Loongson
processors. There is a lot of software optimized for MMI. This patch
splits MMI from loongson2f/3a, and adds GAS and disassembler options for
MMI instructions.
2018-07-20 Chenghua Xu <paul.hua.gm@gmail.com>
Maciej W. Rozycki <macro@mips.com>
bfd/
* elfxx-mips.c (print_mips_ases): Add MMI extension.
binutils/
* readelf.c (print_mips_ases): Add MMI extension.
gas/
* NEWS: Mention MultiMedia extensions Instructions (MMI)
support.
* config/tc-mips.c (options): Add OPTION_LOONGSON_MMI and
OPTION_NO_LOONGSON_MMI.
(md_longopts): Likewise.
(mips_ases): Define availability for MMI.
(mips_convert_ase_flags): Map ASE_LOONGSON_MMI to
AFL_ASE_LOONGSON_MMI.
(mips_cpu_info_table): Add ASE_LOONGSON_MMI for loongson2f/3a.
(md_show_usage): Add help for -mloongson-mmi and
-mno-loongson-mmi.
* doc/as.texi: Document -mloongson-mmi, -mno-loongson-mmi.
* doc/c-mips.texi: Document -mloongson-mmi, -mno-loongson-mmi,
.set loongson-mmi and .set noloongson-mmi.
* testsuite/gas/mips/loongson-2f.d: Move mmi test to ...
* testsuite/gas/mips/loongson-2f-mmi.d: Here. Add ISA/ASE
flag verification.
* testsuite/gas/mips/loongson-2f.s: Move mmi test to ...
* testsuite/gas/mips/loongson-2f-mmi.s: Here.
* testsuite/gas/mips/loongson-3a.d: Move mmi test to ...
* testsuite/gas/mips/loongson-3a-mmi.d: Here. Add ISA/ASE
flag verification.
* testsuite/gas/mips/loongson-3a.s: Move mmi test to ...
* testsuite/gas/mips/loongson-3a-mmi.s: Here.
* testsuite/gas/mips/mips.exp: Run loongson-2f-mmi and
loongson-3a-mmi tests.
include/
* elf/mips.h (AFL_ASE_MMI): New macro.
(AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_MMI.
* opcode/mips.h (ASE_LOONGSON_MMI): New macro.
opcodes/
* mips-dis.c (mips_arch_choices): Add MMI to loongson2f and
loongson3a descriptors.
(parse_mips_ase_option): Handle -M loongson-mmi option.
(print_mips_disassembler_options): Document -M loongson-mmi.
* mips-opc.c (LMMI): New macro.
(mips_opcodes): Replace IL2F|IL3A marking with LMMI for MMI
instructions.
Binutils documentation uses a mix of spelling for the compound word
"command-line X". According to [1]:
"Sometimes compound words are written separately (nail polish),
sometimes with a hyphen (short-sighted) and sometimes as one word
(eyelashes). Often new compounds are written as two separate words and,
as they become more familiar, they are either connected with a hyphen
(-) or made into one word."
I think command-line X is common enough in our industry that the two
workds command and line should be connected. Since command-line is more
common than commandline, I propose to update binutils documentation to
consistently use "command-line" when this is used as an adjective to a
noun (eg. command-line argument, command-line switch, command-line
option and command-line flag). I've left occurences of "the command
line" as is. I've also left gdb, sim and readline alone and have only
touched public documentation (texi and NEWS files).
[1]
http://dictionary.cambridge.org/grammar/british-grammar/word-formation/compounds
2018-07-02 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
* doc/bfdint.texi: Use command-line consistently when used in a
compount word.
* doc/bfdsumm.texi: Likewise.
binutils/
* NEWS: Use command-line consistently when used in a compount word.
* doc/binutils.texi: Likewise and fix trailing whitespace on same
line.
gas/
* NEWS: Use command-line consistently when used in a compount word.
* doc/as.texi: Likewise.
* doc/c-aarch64.texi: Likewise.
* doc/c-alpha.texi: Likewise.
* doc/c-arc.texi: Likewise.
* doc/c-arm.texi: Likewise.
* doc/c-avr.texi: Likewise.
* doc/c-bfin.texi: Likewise.
* doc/c-cris.texi: Likewise.
* doc/c-epiphany.texi: Likewise.
* doc/c-i386.texi: Likewise.
* doc/c-ia64.texi: Likewise.
* doc/c-lm32.texi: Likewise.
* doc/c-m32r.texi: Likewise.
* doc/c-m68k.texi: Likewise.
* doc/c-mips.texi: Likewise.
* doc/c-mmix.texi: Likewise.
* doc/c-msp430.texi: Likewise.
* doc/c-mt.texi: Likewise.
* doc/c-nios2.texi: Likewise.
* doc/c-ppc.texi: Likewise.
* doc/c-pru.texi: Likewise.
* doc/c-rl78.texi: Likewise.
* doc/c-rx.texi: Likewise.
* doc/c-tic6x.texi: Likewise.
* doc/c-v850.texi: Likewise.
* doc/c-vax.texi: Likewise.
* doc/c-visium.texi: Likewise.
* doc/c-xstormy16.texi: Likewise.
* doc/c-xtensa.texi: Likewise.
* doc/c-z80.texi: Likewise.
* doc/c-z8k.texi: Likewise.
* doc/internals.texi: Likewise.
gprof/
* gprof.texi: Use command-line consistently when used in a compount
word.
ld/
* NEWS: Use command-line consistently when used in a compount word.
* ld.texinfo: Likewise.
* ldint.texinfo: Likewise.
This adds a syntax table for dwarf-mode to dwarf-mode.el. I noticed
the need for this when trying to use mark-sexp (C-M-SPC) on a hex
number -- it copied the trailing ">" as well, which isn't desirable.
I've also bumped the version number to make this simpler to install
via the Emacs package system.
Tested locally. I'm checking this in.
binutils/ChangeLog
2018-06-25 Tom Tromey <tom@tromey.com>
* dwarf-mode.el (dwarf-mode-syntax-table): New variable.
Bump version number.
Also make the automake strictness "foreign". My regeneration of the
three doc/Makefile.in files already had --foreign in the automake
invocation, so this just makes it explicit.
bfd/
* doc/Makefile.am (AUTOMAKE_OPTIONS): Add "foreign".
* doc/Makefile.in: Regenerate.
binutils/
* doc/Makefile.am (AUTOMAKE_OPTIONS): Add "foreign".
* doc/Makefile.in: Regenerate.
gas/
* doc/Makefile.am (AUTOMAKE_OPTIONS): Add "foreign".
* doc/Makefile.in: Regenerate.
zlib/
* Makefile.in: Regenerate.
When trying to run the update-gnulib.sh script in gdb, I get this:
Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1.
Aborting.
Apparently, it's an issue with a regex in automake that triggers a
warning starting with Perl 5.22. It has been fixed in automake 1.15.1.
So I think it's a good excuse to bump the versions of autoconf and
automake used in the gnulib import. And to avoid requiring multiple
builds of autoconf/automake, it was suggested that we bump the required
version of those tools for all binutils-gdb.
For autoconf, the 2.69 version is universally available, so it's an easy
choice. For automake, different distros and distro versions have
different automake versions. But 1.15.1 seems to be the most readily
available as a package. In any case, it's easy to build it from source.
I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ,
because I don't think they are useful in our case. They only specify a
lower bound for the acceptable version of automake/autoconf. That's
useful if you let the user choose the version of the tool they want to
use, but want to set a minimum version (because you use a feature that
was introduced in that version). In our case, we force people to use a
specific version anyway. For the autoconf version, we have the check in
config/override.m4 that enforces the version we want. It will be one
less thing to update next time we change autotools version.
I hit a few categories of problems that required some changes. They are
described below along with the chosen solutions.
Problem 1:
configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see:
configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation
Solution 1:
Adjust the code based on the example at that URL.
Problem 2 (in zlib/):
Makefile.am: error: required file './INSTALL' not found
Makefile.am: 'automake --add-missing' can install 'INSTALL'
Makefile.am: error: required file './NEWS' not found
Makefile.am: error: required file './AUTHORS' not found
Makefile.am: error: required file './COPYING' not found
Makefile.am: 'automake --add-missing' can install 'COPYING'
Solution 2:
Add the foreign option to AUTOMAKE_OPTIONS.
Problem 3:
doc/Makefile.am:20: error: support for Cygnus-style trees has been removed
Solution 3:
Remove the cygnus options.
Problem 4:
Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
Solution 4:
Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is
already defined earlier).
Problem 5:
doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 5:
Rename .texinfo files to .texi.
Problem 6:
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 6:
Remove the hack at the bottom of doc/Makefile.am and use
the info-in-builddir automake option.
Problem 7:
doc/Makefile.am:35: error: required file '../texinfo.tex' not found
doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex'
Solution 7:
Use the no-texinfo.tex automake option. We also have one in
texinfo/texinfo.tex, not sure if we should point to that, or move it
(or a newer version of it added with automake --add-missing) to
top-level.
Problem 8:
Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory,
Makefile.am:131: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
Solution 8:
Use subdir-objects, that means adjusting references to some .o that will now
be in config/.
Problem 9:
configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from...
../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from...
../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from...
../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from...
../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from...
configure.ac:375: the top level
Solution 9:
Use AC_LANG_SOURCE, or use proper quoting.
Problem 10 (in intl/):
configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS
/usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from...
/usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from...
/usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from...
/usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from...
/usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from...
/usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from...
/usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from...
configure.ac:7: the top level
Solution 10:
Add AC_USE_SYSTEM_EXTENSIONS in configure.ac.
ChangeLog:
* libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
* README-maintainer-mode: Update version requirements.
* ar-lib: New file.
* test-driver: New file.
* configure: Re-generate.
bfd/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
(INCLUDES): Rename to ...
(AM_CPPFLAGS): ... this.
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add
info-in-builddir no-texinfo.tex.
(info_TEXINFOS): Rename bfd.texinfo to bfd.texi.
* doc/bfd.texinfo: Rename to ...
* doc/bfd.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
binutils/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add
info-in-builddir no-texinfo.tex.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
config/ChangeLog:
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
etc/ChangeLog:
* configure.in: Remove AC_PREREQ.
* configure: Re-generate.
gas/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects.
(TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix.
* configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles,
extra_objects): Add config/ prefix.
* doc/as.texinfo: Rename to...
* doc/as.texi: ... this.
* doc/Makefile.am: Rename as.texinfo to as.texi throughout.
Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and
info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gdb/ChangeLog:
* common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION,
PACKAGE_STRING, PACKAGE_TARNAME): Undefine.
* configure.ac: Remove AC_PREREQ, add missing quoting.
* gnulib/configure.ac: Modernize usage of
AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ.
* gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69.
(AUTOMAKE_VERSION): Bump to 1.15.1.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
* gnulib/aclocal.m4: Re-generate.
* gnulib/config.in: Re-generate.
* gnulib/configure: Re-generate.
* gnulib/import/Makefile.in: Re-generate.
gdb/gdbserver/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
gdb/testsuite/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
gold/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting and usage
of AC_LANG_SOURCE.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* testsuite/Makefile.in: Re-generate.
gprof/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* gconfig.in: Re-generate.
intl/ChangeLog:
* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ.
* configure: Re-generate.
* config.h.in: Re-generate.
* aclocal.m4: Re-generate.
ld/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to
ld.texi, ldint.texinfo to ldint.texi throughout.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
* README: Rename ld.texinfo to ld.texi, ldint.texinfo to
ldint.texi throughout.
* gen-doc.texi: Likewise.
* h8-doc.texi: Likewise.
* ld.texinfo: Rename to ...
* ld.texi: ... this.
* ldint.texinfo: Rename to ...
* ldint.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
libdecnumber/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* aclocal.m4.
libiberty/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* config.in: Re-generate.
opcodes/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
* configure.ac: Remove AC_PREREQ.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
readline/ChangeLog.gdb:
* configure: Re-generate.
* examples/rlfe/configure: Re-generate.
sim/ChangeLog:
* All configure.ac: Remove AC_PREREQ.
* All configure: Re-generate.
zlib/ChangeLog.bin-gdb:
* configure.ac: Modernize AC_INIT call, remove AC_PREREQ.
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add
foreign.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* readelf.c (is_16bit_abs_reloc): Handle R_RISCV_SET16.
(is_8bit_abs_reloc): New function.
(is_6bit_abs_reloc): New function.
(is_6bit_inplace_sub_reloc): New function.
(apply_relocations): Use them. Handle 6-bit relocations.
Add support for the Global INValidate Application Specific Extension
for Release 6 of the MIPS Architecture.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS32
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 187-191
bfd/
* elfxx-mips.c (print_mips_ases): Add GINV extension.
binutils/
* readelf.c (print_mips_ases): Add GINV extension.
gas/
* NEWS: Mention MIPS Global INValidate ASE support.
* config/tc-mips.c (options): Add OPTION_GINV and OPTION_NO_GINV.
(md_longopts): Likewise.
(mips_ases): Define availability for GINV.
(mips_convert_ase_flags): Map ASE_GINV to AFL_ASE_GINV.
(md_show_usage): Add help for -mginv and -mno-ginv.
* doc/as.texinfo: Document -mginv, -mno-ginv.
* doc/c-mips.texi: Document -mginv, -mno-ginv, .set ginv and
.set noginv.
* testsuite/gas/mips/ase-errors-1.s: Add error checks for GINV
ASE.
* testsuite/gas/mips/ase-errors-2.s: Likewise.
* testsuite/gas/mips/ase-errors-1.l: Likewise.
* testsuite/gas/mips/ase-errors-2.l: Likewise.
* testsuite/gas/mips/ginv.d: New test.
* testsuite/gas/mips/ginv-err.d: New test.
* testsuite/gas/mips/ginv-err.l: New test stderr output.
* testsuite/gas/mips/ginv.s: New test source.
* testsuite/gas/mips/ginv-err.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
include/
* elf/mips.h (AFL_ASE_GINV, AFL_ASE_RESERVED1): New macros.
(AFL_ASE_MASK): Update to include AFL_ASE_GINV.
* opcode/mips.h: Document "+\" operand format.
(ASE_GINV): New macro.
opcodes/
* mips-dis.c (mips_arch_choices): Add GINV to mips32r6 and
mips64r6 descriptors.
(parse_mips_ase_option): Handle -Mginv option.
(print_mips_disassembler_options): Document -Mginv.
* mips-opc.c (decode_mips_operand) <+\>: New operand format.
(GINV): New macro.
(mips_opcodes): Define ginvi and ginvt.
Check VER_FLG_BASE instead of assuming that the first symbol version is
base version.
bfd/
PR binutils/23267
* elf.c (_bfd_elf_get_symbol_version_string): Check if the first
symbol version is base version.
binutils/
PR binutils/23267
* readelf.c (get_symbol_version_string): Check if the first
symbol version is base version.
Add support for the CRC Application Specific Extension for Release 6 of
the MIPS Architecture.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS32
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 143-148
[2] "MIPS Architecture for Programmers Volume II-A: The MIPS64
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00087, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 165-170
ChangeLog:
bfd/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* elfxx-mips.c (print_mips_ases): Add CRC.
binutils/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* readelf.c (print_mips_ases): Add CRC.
gas/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
Maciej W. Rozycki <macro@mips.com>
* config/tc-mips.c (options): Add OPTION_CRC and OPTION_NO_CRC.
(md_longopts): Likewise.
(md_show_usage): Add help for -mcrc and -mno-crc.
(mips_ases): Define availability for CRC and CRC64.
(mips_convert_ase_flags): Map ASE_CRC to AFL_ASE_CRC.
* doc/as.texinfo: Document -mcrc, -mno-crc.
* doc/c-mips.texi: Document -mcrc, -mno-crc, .set crc and
.set no-crc.
* testsuite/gas/mips/ase-errors-1.l: Add error checks for CRC
ASE.
* testsuite/gas/mips/ase-errors-2.l: Likewise.
* testsuite/gas/mips/ase-errors-1.s: Likewise.
* testsuite/gas/mips/ase-errors-2.s: Likewise.
* testsuite/gas/mips/crc.d: New test.
* testsuite/gas/mips/crc64.d: New test.
* testsuite/gas/mips/crc-err.d: New test.
* testsuite/gas/mips/crc64-err.d: New test.
* testsuite/gas/mips/crc-err.l: New test stderr output.
* testsuite/gas/mips/crc64-err.l: New test stderr output.
* testsuite/gas/mips/crc.s: New test source.
* testsuite/gas/mips/crc64.s: New test source.
* testsuite/gas/mips/crc-err.s: New test source.
* testsuite/gas/mips/crc64-err.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
include/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* elf/mips.h (AFL_ASE_CRC): New macro.
(AFL_ASE_MASK): Update to include AFL_ASE_CRC.
* opcode/mips.h (ASE_CRC): New macro.
* opcode/mips.h (ASE_CRC64): Likewise.
opcodes/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* mips-dis.c (mips_arch_choices): Add CRC and CRC64 ASEs.
* mips-opc.c (CRC, CRC64): New macros.
(mips_builtin_opcodes): Define crc32b, crc32h, crc32w,
crc32cb, crc32ch and crc32cw for CRC. Define crc32d and
crc32cd for CRC64.
Bump version number to 2.30.52 since _bfd_link_hide_symbol has been added
to bfd_target.
bfd/
* version.m4: Bump version to 2.30.52
* configure: Regenerated.
binutils/
* configure: Regenerated.
gas/
* configure: Regenerated.
gprof/
* configure: Regenerated.
ld/
* configure: Regenerated.
opcodes/
* configure: Regenerated.
Setting CC_FOR_TARGET from the environment CC was just plain wrong,
and no doubt the reason these tests were only run natively.
* testsuite/binutils-all/compress.exp (test_gnu_debuglink): Don't
set CC_FOR_TARGET. Run test non-native.
* testsuite/binutils-all/objdump.exp (test_build_id_debuglink):
Likewise.
(test_follow_debuglink): Run test non-native.
PR 23107
* ar.c (display_offsets): New variable.
(usage): Add description of 'O' operator.
(decode_option): Handle 'O' operator.
(print_descr): Pass display_offsets to print_arelt_descr.
* arsup.c: Update call to printy_arelt_descr.
* objdump.c: Likewise.
* bucomm.c (print_arelt_descr): If offsets parameter is true then
display offset of archive element within the archive.
* bucomm.h: Update prototype for print_arelt_descr.
* doc/binutils.texi: Update description of ar command.
* NEWS: Mention the new feature.
* testsuite/binutils-all/ar.exp: Add text of new feature.
This patch doesn't stop the build-id and debuglink tests using the
installed ld, it just prevents a compiler failure from resulting in a
test fail. We could move the tests to the ld testsuite but it doesn't
seem all that important.
PR 23235
* testsuite/binutils-all/compress.exp (test_gnu_debuglink): Return
unsupported rather than fail on compile errors.
* testsuite/binutils-all/objdump.exp (test_build_id_debuglink):
Likewise. Save and restore CFLAGS_FOR_TARGET.
bfd * Makefile.am: Add s12z files.
* Makefile.in: Regenerate.
* archures.c: Add bfd_s12z_arch.
* bfd-in.h: Add exports of bfd_putb24 and bfd_putl24.
* bfd-in2.h: Regenerate.
* config.bfd: Add s12z target.
* configure.ac: Add s12z target.
* configure: Regenerate.
* cpu-s12z.c: New file.
* elf32-s12z.c: New file.
* libbfd.c (bfd_putb24): New function.
(bfd_putl24): New function.
* libbfd.h: Regenerate.
* reloc.c: Add s12z relocations.
(bfd_get_reloc_size): Handle size 5 relocs.
* targets.c: Add s12z_elf32_vec.
opcodes * Makefile.am: Add support for s12z architecture.
* configure.ac: Likewise.
* disassemble.c: Likewise.
* disassemble.h: Likewise.
* Makefile.in: Regenerate.
* configure: Regenerate.
* s12z-dis.c: New file.
* s12z.h: New file.
include * elf/s12z.h: New header.
ld * Makefile.am: Add support for s12z architecture.
* configure.tgt: Likewise.
* Makefile.in: Regenerate.
* emulparams/m9s12zelf.sh: New file.
* scripttempl/elfm9s12z.sc: New file.
* testsuite/ld-discard/static.d: Expect to fail for the s12z
target.
* testsuite/ld-elf/endsym.d: Likewise.
* testsuite/ld-elf/merge.d: Likewise.
* testsuite/ld-elf/pr14926.d: Skip for the s12z target.
* testsuite/ld-elf/sec64k.exp: Likewise.
* testsuite/ld-s12z: New directory.
* testsuite/ld-s12z/opr-linking.d: New file.
* testsuite/ld-s12z/opr-linking.s: New file.
* testsuite/ld-s12z/relative-linking.d: New file.
* testsuite/ld-s12z/relative-linking.s: New file.
* testsuite/ld-s12z/z12s.exp: New file.
gas * Makefile.am: Add support for s12z target.
* Makefile.in: Regenerate.
* NEWS: Mention the new support.
* config/tc-s12z.c: New file.
* config/tc-s12z.h: New file.
* configure.tgt: Add s12z support.
* doc/Makefile.am: Likewise.
* doc/Makefile.in: Regenerate.
* doc/all.texi: Add s12z documentation.
* doc/as.textinfo: Likewise.
* doc/c-s12z.texi: New file.
* testsuite/gas/s12z: New directory.
* testsuite/gas/s12z/abs.d: New file.
* testsuite/gas/s12z/abs.s: New file.
* testsuite/gas/s12z/adc-imm.d: New file.
* testsuite/gas/s12z/adc-imm.s: New file.
* testsuite/gas/s12z/adc-opr.d: New file.
* testsuite/gas/s12z/adc-opr.s: New file.
* testsuite/gas/s12z/add-imm.d: New file.
* testsuite/gas/s12z/add-imm.s: New file.
* testsuite/gas/s12z/add-opr.d: New file.
* testsuite/gas/s12z/add-opr.s: New file.
* testsuite/gas/s12z/and-imm.d: New file.
* testsuite/gas/s12z/and-imm.s: New file.
* testsuite/gas/s12z/and-opr.d: New file.
* testsuite/gas/s12z/and-opr.s: New file.
* testsuite/gas/s12z/and-or-cc.d: New file.
* testsuite/gas/s12z/and-or-cc.s: New file.
* testsuite/gas/s12z/bfext-special.d: New file.
* testsuite/gas/s12z/bfext-special.s: New file.
* testsuite/gas/s12z/bfext.d: New file.
* testsuite/gas/s12z/bfext.s: New file.
* testsuite/gas/s12z/bit-manip.d: New file.
* testsuite/gas/s12z/bit-manip.s: New file.
* testsuite/gas/s12z/bit.d: New file.
* testsuite/gas/s12z/bit.s: New file.
* testsuite/gas/s12z/bra-expression-defined.d: New file.
* testsuite/gas/s12z/bra-expression-defined.s: New file.
* testsuite/gas/s12z/bra-expression-undef.d: New file.
* testsuite/gas/s12z/bra-expression-undef.s: New file.
* testsuite/gas/s12z/bra.d: New file.
* testsuite/gas/s12z/bra.s: New file.
* testsuite/gas/s12z/brclr-symbols.d: New file.
* testsuite/gas/s12z/brclr-symbols.s: New file.
* testsuite/gas/s12z/brset-clr-opr-imm-rel.d: New file.
* testsuite/gas/s12z/brset-clr-opr-imm-rel.s: New file.
* testsuite/gas/s12z/brset-clr-opr-reg-rel.d: New file.
* testsuite/gas/s12z/brset-clr-opr-reg-rel.s: New file.
* testsuite/gas/s12z/brset-clr-reg-imm-rel.d: New file.
* testsuite/gas/s12z/brset-clr-reg-imm-rel.s: New file.
* testsuite/gas/s12z/brset-clr-reg-reg-rel.d: New file.
* testsuite/gas/s12z/brset-clr-reg-reg-rel.s: New file.
* testsuite/gas/s12z/clb.d: New file.
* testsuite/gas/s12z/clb.s: New file.
* testsuite/gas/s12z/clr-opr.d: New file.
* testsuite/gas/s12z/clr-opr.s: New file.
* testsuite/gas/s12z/clr.d: New file.
* testsuite/gas/s12z/clr.s: New file.
* testsuite/gas/s12z/cmp-imm.d: New file.
* testsuite/gas/s12z/cmp-imm.s: New file.
* testsuite/gas/s12z/cmp-opr-inc.d: New file.
* testsuite/gas/s12z/cmp-opr-inc.s: New file.
* testsuite/gas/s12z/cmp-opr-rdirect.d: New file.
* testsuite/gas/s12z/cmp-opr-rdirect.s: New file.
* testsuite/gas/s12z/cmp-opr-reg.d: New file.
* testsuite/gas/s12z/cmp-opr-reg.s: New file.
* testsuite/gas/s12z/cmp-opr-rindirect.d: New file.
* testsuite/gas/s12z/cmp-opr-rindirect.s: New file.
* testsuite/gas/s12z/cmp-opr-sxe4.d: New file.
* testsuite/gas/s12z/cmp-opr-sxe4.s: New file.
* testsuite/gas/s12z/cmp-opr-xys.d: New file.
* testsuite/gas/s12z/cmp-opr-xys.s: New file.
* testsuite/gas/s12z/cmp-s-imm.d: New file.
* testsuite/gas/s12z/cmp-s-imm.s: New file.
* testsuite/gas/s12z/cmp-s-opr.d: New file.
* testsuite/gas/s12z/cmp-s-opr.s: New file.
* testsuite/gas/s12z/cmp-xy.d: New file.
* testsuite/gas/s12z/cmp-xy.s: New file.
* testsuite/gas/s12z/com-opr.d: New file.
* testsuite/gas/s12z/com-opr.s: New file.
* testsuite/gas/s12z/complex-shifts.d: New file.
* testsuite/gas/s12z/complex-shifts.s: New file.
* testsuite/gas/s12z/db-tb-cc-opr.d: New file.
* testsuite/gas/s12z/db-tb-cc-opr.s: New file.
* testsuite/gas/s12z/db-tb-cc-reg.d: New file.
* testsuite/gas/s12z/db-tb-cc-reg.s: New file.
* testsuite/gas/s12z/dbCC.d: New file.
* testsuite/gas/s12z/dbCC.s: New file.
* testsuite/gas/s12z/dec-opr.d: New file.
* testsuite/gas/s12z/dec-opr.s: New file.
* testsuite/gas/s12z/dec.d: New file.
* testsuite/gas/s12z/dec.s: New file.
* testsuite/gas/s12z/div.d: New file.
* testsuite/gas/s12z/div.s: New file.
* testsuite/gas/s12z/eor.d: New file.
* testsuite/gas/s12z/eor.s: New file.
* testsuite/gas/s12z/exg.d: New file.
* testsuite/gas/s12z/exg.s: New file.
* testsuite/gas/s12z/ext24-ld-xy.d: New file.
* testsuite/gas/s12z/ext24-ld-xy.s: New file.
* testsuite/gas/s12z/inc-opr.d: New file.
* testsuite/gas/s12z/inc-opr.s: New file.
* testsuite/gas/s12z/inc.d: New file.
* testsuite/gas/s12z/inc.s: New file.
* testsuite/gas/s12z/inh.d: New file.
* testsuite/gas/s12z/inh.s: New file.
* testsuite/gas/s12z/jmp.d: New file.
* testsuite/gas/s12z/jmp.s: New file.
* testsuite/gas/s12z/jsr.d: New file.
* testsuite/gas/s12z/jsr.s: New file.
* testsuite/gas/s12z/ld-imm-page2.d: New file.
* testsuite/gas/s12z/ld-imm-page2.s: New file.
* testsuite/gas/s12z/ld-imm.d: New file.
* testsuite/gas/s12z/ld-imm.s: New file.
* testsuite/gas/s12z/ld-immu18.d: New file.
* testsuite/gas/s12z/ld-immu18.s: New file.
* testsuite/gas/s12z/ld-large-direct.d: New file.
* testsuite/gas/s12z/ld-large-direct.s: New file.
* testsuite/gas/s12z/ld-opr.d: New file.
* testsuite/gas/s12z/ld-opr.s: New file.
* testsuite/gas/s12z/ld-s-opr.d: New file.
* testsuite/gas/s12z/ld-s-opr.s: New file.
* testsuite/gas/s12z/ld-small-direct.d: New file.
* testsuite/gas/s12z/ld-small-direct.s: New file.
* testsuite/gas/s12z/lea-immu18.d: New file.
* testsuite/gas/s12z/lea-immu18.s: New file.
* testsuite/gas/s12z/lea.d: New file.
* testsuite/gas/s12z/lea.s: New file.
* testsuite/gas/s12z/mac.d: New file.
* testsuite/gas/s12z/mac.s: New file.
* testsuite/gas/s12z/min-max.d: New file.
* testsuite/gas/s12z/min-max.s: New file.
* testsuite/gas/s12z/mod.d: New file.
* testsuite/gas/s12z/mod.s: New file.
* testsuite/gas/s12z/mov.d: New file.
* testsuite/gas/s12z/mov.s: New file.
* testsuite/gas/s12z/mul-imm.d: New file.
* testsuite/gas/s12z/mul-imm.s: New file.
* testsuite/gas/s12z/mul-opr-opr.d: New file.
* testsuite/gas/s12z/mul-opr-opr.s: New file.
* testsuite/gas/s12z/mul-opr.d: New file.
* testsuite/gas/s12z/mul-opr.s: New file.
* testsuite/gas/s12z/mul-reg.d: New file.
* testsuite/gas/s12z/mul-reg.s: New file.
* testsuite/gas/s12z/mul.d: New file.
* testsuite/gas/s12z/mul.s: New file.
* testsuite/gas/s12z/neg-opr.d: New file.
* testsuite/gas/s12z/neg-opr.s: New file.
* testsuite/gas/s12z/not-so-simple-shifts.d: New file.
* testsuite/gas/s12z/not-so-simple-shifts.s: New file.
* testsuite/gas/s12z/opr-18u.d: New file.
* testsuite/gas/s12z/opr-18u.s: New file.
* testsuite/gas/s12z/opr-expr.d: New file.
* testsuite/gas/s12z/opr-expr.s: New file.
* testsuite/gas/s12z/opr-ext-18.d: New file.
* testsuite/gas/s12z/opr-ext-18.s: New file.
* testsuite/gas/s12z/opr-idx-24-reg.d: New file.
* testsuite/gas/s12z/opr-idx-24-reg.s: New file.
* testsuite/gas/s12z/opr-idx3-reg.d: New file.
* testsuite/gas/s12z/opr-idx3-reg.s: New file.
* testsuite/gas/s12z/opr-idx3-xysp-24.d: New file.
* testsuite/gas/s12z/opr-idx3-xysp-24.s: New file.
* testsuite/gas/s12z/opr-indirect-expr.d: New file.
* testsuite/gas/s12z/opr-indirect-expr.s: New file.
* testsuite/gas/s12z/opr-symbol.d: New file.
* testsuite/gas/s12z/opr-symbol.s: New file.
* testsuite/gas/s12z/or-imm.d: New file.
* testsuite/gas/s12z/or-imm.s: New file.
* testsuite/gas/s12z/or-opr.d: New file.
* testsuite/gas/s12z/or-opr.s: New file.
* testsuite/gas/s12z/p2-mul.d: New file.
* testsuite/gas/s12z/p2-mul.s: New file.
* testsuite/gas/s12z/page2-inh.d: New file.
* testsuite/gas/s12z/page2-inh.s: New file.
* testsuite/gas/s12z/psh-pul.d: New file.
* testsuite/gas/s12z/psh-pul.s: New file.
* testsuite/gas/s12z/qmul.d: New file.
* testsuite/gas/s12z/qmul.s: New file.
* testsuite/gas/s12z/rotate.d: New file.
* testsuite/gas/s12z/rotate.s: New file.
* testsuite/gas/s12z/s12z.exp: New file.
* testsuite/gas/s12z/sat.d: New file.
* testsuite/gas/s12z/sat.s: New file.
* testsuite/gas/s12z/sbc-imm.d: New file.
* testsuite/gas/s12z/sbc-imm.s: New file.
* testsuite/gas/s12z/sbc-opr.d: New file.
* testsuite/gas/s12z/sbc-opr.s: New file.
* testsuite/gas/s12z/shift.d: New file.
* testsuite/gas/s12z/shift.s: New file.
* testsuite/gas/s12z/simple-shift.d: New file.
* testsuite/gas/s12z/simple-shift.s: New file.
* testsuite/gas/s12z/single-ops.d: New file.
* testsuite/gas/s12z/single-ops.s: New file.
* testsuite/gas/s12z/specd6.d: New file.
* testsuite/gas/s12z/specd6.s: New file.
* testsuite/gas/s12z/st-large-direct.d: New file.
* testsuite/gas/s12z/st-large-direct.s: New file.
* testsuite/gas/s12z/st-opr.d: New file.
* testsuite/gas/s12z/st-opr.s: New file.
* testsuite/gas/s12z/st-s-opr.d: New file.
* testsuite/gas/s12z/st-s-opr.s: New file.
* testsuite/gas/s12z/st-small-direct.d: New file.
* testsuite/gas/s12z/st-small-direct.s: New file.
* testsuite/gas/s12z/st-xy.d: New file.
* testsuite/gas/s12z/st-xy.s: New file.
* testsuite/gas/s12z/sub-imm.d: New file.
* testsuite/gas/s12z/sub-imm.s: New file.
* testsuite/gas/s12z/sub-opr.d: New file.
* testsuite/gas/s12z/sub-opr.s: New file.
* testsuite/gas/s12z/tfr.d: New file.
* testsuite/gas/s12z/tfr.s: New file.
* testsuite/gas/s12z/trap.d: New file.
* testsuite/gas/s12z/trap.s: New file.
binutils* readelf.c: Add support for s12z architecture.
* testsuite/lib/binutils-common.exp (is_elf_format): Excluse s12z
targets.
This patch adds constraints for read and write only system registers with the
msr and mrs instructions. The code will treat having both flags set and none
set as the same. These flags add constraints that must be matched up. e.g. a
system register with a READ only flag set, can only be used with mrs. If The
constraint fails a warning is emitted.
Examples of the warnings generated:
test.s: Assembler messages:
test.s:5: Warning: specified register cannot be written to at operand 1 -- `msr dbgdtrrx_el0,x3'
test.s:7: Warning: specified register cannot be read from at operand 2 -- `mrs x3,dbgdtrtx_el0'
test.s:8: Warning: specified register cannot be written to at operand 1 -- `msr midr_el1,x3'
and disassembly notes:
0000000000000000 <main>:
0: d5130503 msr dbgdtrtx_el0, x3
4: d5130503 msr dbgdtrtx_el0, x3
8: d5330503 mrs x3, dbgdtrrx_el0
c: d5330503 mrs x3, dbgdtrrx_el0
10: d5180003 msr midr_el1, x3 ; note: writing to a read-only register.
Note that because dbgdtrrx_el0 and dbgdtrtx_el0 have the same encoding, during
disassembly the constraints are use to disambiguate between the two. An exact
constraint match is always prefered over partial ones if available.
As always the warnings can be suppressed with -w and also be made errors using
warnings as errors.
binutils/
PR binutils/21446
* doc/binutils.texi (-M): Document AArch64 options.
gas/
PR binutils/21446
* testsuite/gas/aarch64/illegal-sysreg-2.s: Fix pmbidr_el1 test.
* testsuite/gas/aarch64/illegal-sysreg-2.l: Likewise.
* testsuite/gas/aarch64/illegal-sysreg-2.d: Likewise.
* testsuite/gas/aarch64/sysreg-diagnostic.s: New.
* testsuite/gas/aarch64/sysreg-diagnostic.l: New.
* testsuite/gas/aarch64/sysreg-diagnostic.d: New.
include/
PR binutils/21446
* opcode/aarch64.h (F_SYS_READ, F_SYS_WRITE): New.
opcodes/
PR binutils/21446
* aarch64-asm.c (opintl.h): Include.
(aarch64_ins_sysreg): Enforce read/write constraints.
* aarch64-dis.c (aarch64_ext_sysreg): Likewise.
* aarch64-opc.h (F_DEPRECATED, F_ARCHEXT, F_HASXT): Moved here.
(F_REG_READ, F_REG_WRITE): New.
* aarch64-opc.c (aarch64_print_operand): Generate notes for
AARCH64_OPND_SYSREG.
(F_DEPRECATED, F_ARCHEXT, F_HASXT): Move to aarch64-opc.h.
(aarch64_sys_regs): Add constraints to currentel, midr_el1, ctr_el0,
mpidr_el1, revidr_el1, aidr_el1, dczid_el0, id_dfr0_el1, id_pfr0_el1,
id_pfr1_el1, id_afr0_el1, id_mmfr0_el1, id_mmfr1_el1, id_mmfr2_el1,
id_mmfr3_el1, id_mmfr4_el1, id_isar0_el1, id_isar1_el1, id_isar2_el1,
id_isar3_el1, id_isar4_el1, id_isar5_el1, mvfr0_el1, mvfr1_el1,
mvfr2_el1, ccsidr_el1, id_aa64pfr0_el1, id_aa64pfr1_el1,
id_aa64dfr0_el1, id_aa64dfr1_el1, id_aa64isar0_el1, id_aa64isar1_el1,
id_aa64mmfr0_el1, id_aa64mmfr1_el1, id_aa64mmfr2_el1, id_aa64afr0_el1,
id_aa64afr0_el1, id_aa64afr1_el1, id_aa64zfr0_el1, clidr_el1,
csselr_el1, vsesr_el2, erridr_el1, erxfr_el1, rvbar_el1, rvbar_el2,
rvbar_el3, isr_el1, tpidrro_el0, cntfrq_el0, cntpct_el0, cntvct_el0,
mdccsr_el0, dbgdtrrx_el0, dbgdtrtx_el0, osdtrrx_el1, osdtrtx_el1,
mdrar_el1, oslar_el1, oslsr_el1, dbgauthstatus_el1, pmbidr_el1,
pmsidr_el1, pmswinc_el0, pmceid0_el0, pmceid1_el0.
* aarch64-tbl.h (aarch64_opcode_table): Add constraints to
msr (F_SYS_WRITE), mrs (F_SYS_READ).
This patch adds a new platform option "notes" that can be used to indicate if
disassembly notes should be placed in the disassembly as comments.
These notes can contain information about a failing constraint such as reading
from a write-only register. The disassembly will not be blocked because of this
but -M notes will emit a comment saying that the operation is not allowed.
For assembly this patch adds a new non-fatal status for errors. This is
essentially a warning. The reason for not creating an actual warning type is
that this causes the interaction between the ordering of warnings and errors to
be problematic. Currently the error buffer is almost always filled because of
the way operands are matched during assembly. An earlier template may have put
an error there that would only be displayed if no other template matches or
generates a higher priority error. But by definition a warning is lower
priority than a warning, so the error (which is incorrect if another template
matched) will supersede the warning. By treating warnings as errors and only
later relaxing the severity this relationship keeps working and the existing
reporting infrastructure can be re-used.
binutils/
PR binutils/21446
* doc/binutils.texi (-M): Document AArch64 options.
* NEWS: Document notes and warnings.
gas/
PR binutils/21446
* config/tc-aarch64.c (print_operands): Indicate no notes.
(output_operand_error_record): Support non-fatal errors.
(output_operand_error_report, warn_unpredictable_ldst, md_assemble):
Likewise.
include/
PR binutils/21446
* opcode/aarch64.h (aarch64_operand_error): Add non_fatal.
(aarch64_print_operand): Support notes.
opcodes/
PR binutils/21446
* aarch64-dis.c (no_notes: New.
(parse_aarch64_dis_option): Support notes.
(aarch64_decode_insn, print_operands): Likewise.
(print_aarch64_disassembler_options): Document notes.
* aarch64-opc.c (aarch64_print_operand): Support notes.
