Fix misplaced 'break' in handling of NM_SHRA_R_PH. Found by
Coverity (CID 1395627).
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fix emulation of microMIPS R6 <SELEQZ|SELNEZ>.<D|S> instructions.
Their handling was permuted.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Matthew Fortune <matthew.fortune@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Implement hardware page table walker. This implementation is
limiter only to MIPS32.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add reset state for PWSize and PWField registers. The reset state
is different for pre-R6 and R6 (and post-R6) ISAa.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add PWCtl register (CP0 Register 5, Select 6).
The PWCtl register configures hardware page table walking for TLB
refills.
This register is required for the hardware page walker feature. It
exists only if Config3 PW bit is set to 1. It contains following
fields:
PWEn (31) - Hardware Page Table walker enable
PWDirExt (30) - If 1, 4-th level implemented (MIPS64 only)
XK (28) - If 1, walker handles xkseg (MIPS64 only)
XS (27) - If 1, walker handles xsseg (MIPS64 only)
XU (26) - If 1, walker handles xuseg (MIPS64 only)
DPH (7) - Dual Page format of Huge Page support
HugePg (6) - Huge Page PTE supported in Directory levels
PSn (5..0) - Bit position of PTEvld in Huge Page PTE
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add PWSize register (CP0 Register 5, Select 7).
The PWSize register configures hardware page table walking for TLB
refills.
This register is required for the hardware page walker feature. It
exists only if Config3 PW bit is set to 1. It contains following
fields:
BDW (37..32) Base Directory index width (MIPS64 only)
GDW (29..24) Global Directory index width
UDW (23..18) Upper Directory index width
MDW (17..12) Middle Directory index width
PTW (11..6 ) Page Table index width
PTEW ( 5..0 ) Left shift applied to the Page Table index
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add PWField register (CP0 Register 5, Select 6).
The PWField register configures hardware page table walking for TLB
refills.
This register is required for the hardware page walker feature. It
exists only if Config3 PW bit is set to 1. It contains following
fields:
MIPS64:
BDI (37..32) - Base Directory index
GDI (29..24) - Global Directory index
UDI (23..18) - Upper Directory index
MDI (17..12) - Middle Directory index
PTI (11..6 ) - Page Table index
PTEI ( 5..0 ) - Page Table Entry shift
MIPS32:
GDW (29..24) - Global Directory index
UDW (23..18) - Upper Directory index
MDW (17..12) - Middle Directory index
PTW (11..6 ) - Page Table index
PTEW ( 5..0 ) - Page Table Entry shift
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add PWBase register (CP0 Register 5, Select 5).
The PWBase register contains the Page Table Base virtual address.
This register is required for the hardware page walker feature. It
exists only if Config3 PW bit is set to 1.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add field corresponding to CP0 Config2 to DisasContext. This is
needed for availability control via Config2 bits.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Do following replacements:
ASE_DSPR2 -> ASE_DSP_R2
ASE_DSPR3 -> ASE_DSP_R3
MIPS_HFLAG_DSPR2 -> MIPS_HFLAG_DSP_R2
MIPS_HFLAG_DSPR3 -> MIPS_HFLAG_DSP_R3
check_dspr2() -> check_dsp_r2()
check_dspr3() -> check_dsp_r3()
and several other similar minor replacements.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add infrastructure for availability control for DSP R3 ASE MIPS
instructions. Only BPOSGE32C currently belongs to DSP R3 ASE, but
this is likely to be changed in near future.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add DSP R3 ASE related bit definition for insn_flags and hflags.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Increase the size of insn_flags holder size to 64 bits. This is
needed for future extensions since existing bits are almost all used.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add opcode values for all instructions in MXU ASE.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add a comment that contains an organizational chart of MXU ASE
instructions.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add a comment that contains a list all MXU instructions,
expressed in assembler mnemonics.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add a comment that contains a basic description of MXU ASE.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add a comment before each CP0 register section in CPUMIPSState
definition, thus visually separating these sections.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add a comment with an overview of CP0 registers close to the
definition of their corresponding fields in CPUMIPSState.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
* Add user-mode CSR defininitions.
* Reorder CSR definitions to match the specification.
* Change H mode interrupt comment to 'reserved'.
* Remove unused X_COP interrupt.
* Add user-mode interrupts.
* Remove erroneous until comments on machine mode interrupts.
* Move together paging mode and page table bit definitions.
* Move together interrupt and exception cause definitions.
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This patch makes op_helper.c contain only instruction
operation helpers used by translate.c and moves any
unrelated cpu helpers into cpu_helper.c. No logic is
changed by this patch.
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Change the API of riscv_set_local_interrupt to take a
write mask and value to allow setting and clearing of
multiple local interrupts atomically in a single call.
Rename the new function to riscv_cpu_update_mip.
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
On PCXS chips (PA7000, pa 1.1a), trap #18 is raised on memory faults,
while all later chips (>= PA7100) generate either trap #26, #27 or #28
(depending on the fault type).
Since the current qemu emulation emulates a B160L machine (with a
PA7300LC PCX-L2 chip, we should raise trap #26 (EXCP_DMAR) instead
of #18 (EXCP_DMP) on access faults by the Linux kernel to page zero.
With the patch we now get the correct output (I tested against real
hardware):
Kernel Fault: Code=26 (Data memory access rights trap)
instead of:
Kernel Fault: Code=18 (Data memory protection/unaligned access trap)
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <20181007205153.GA30270@ls3530.fritz.box>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The get_phys_addr() functions take a pointer to an ARMMMUFaultInfo
struct, which they fill in only if a fault occurs. This means that
the caller must always zero-initialize the struct before passing
it in. We forgot to do this in v7m_stack_read() and v7m_stack_write().
Correct the error.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181011172057.9466-1-peter.maydell@linaro.org
This is an amendment to my earlier patch:
commit 7ece99b17e
Author: Aaron Lindsay <alindsay@codeaurora.org>
Date: Thu Apr 26 11:04:39 2018 +0100
target/arm: Mask PMU register writes based on PMCR_EL0.N
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181010203735.27918-3-aclindsa@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
I previously fixed this for PMINTENSET_EL1, but missed these.
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Signed-off-by: Aaron Lindsay <aclindsa@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181010203735.27918-2-aclindsa@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the ARM Cortex-A72.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20181011021931.4249-11-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When QEMU provides the equivalent of the EL3 firmware, we
need to enable HVCs in scr_el3 when turning on CPUs that
target EL2.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20181011021931.4249-10-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The gen_BUG() function calls already cpu_abort(), which prints the
information to stderr and the log already. So instead of additionally
printing the dc->pc via fprintf() and qemu_log here, too, we can
simply pass this information to cpu_abort() instead.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The incorrect value advertised only thumb2 div without arm div.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181008212205.17752-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The missing nibble made it more difficult to read.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181008212205.17752-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181008212205.17752-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
At present we assert:
arm_el_is_aa64: Assertion `el >= 1 && el <= 3' failed.
The comment in arm_el_is_aa64 explains why asking about EL0 without
extra information is impossible. Add an extra argument to provide
it from the surrounding context.
Fixes: 0ab5953b00
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181008212205.17752-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let's use the KVM_SET_DEVICE_ATTR ioctl to enable hardware
interpretation of AP instructions executed on the guest.
If the S390_FEAT_AP feature is switched on for the guest,
AP instructions must be interpreted by default; otherwise,
they will be intercepted.
This attribute setting may be overridden by a device. For example,
a device may want to provide AP instructions to the guest (i.e.,
S390_FEAT_AP turned on), but it may want to emulate them. In this
case, the AP instructions executed on the guest must be
intercepted; so when the device is realized, it must disable
interpretation.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Tested-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20181010170309.12045-4-akrowiak@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
A new CPU model feature and two new CPU model facilities are
introduced to support AP devices for a KVM guest.
CPU model features:
1. The S390_FEAT_AP CPU model feature indicates whether AP
instructions are available to the guest. This feature will
be enabled only if the AP instructions are available on the
linux host as determined by the availability of the
KVM_S390_VM_CRYPTO_ENABLE_APIE VM attribute which is exposed
by KVM only if the AP instructions are available on the
host.
This feature must be turned on from userspace to execute AP
instructions on the KVM guest. The QEMU command line to turn
this feature on looks something like this:
qemu-system-s390x ... -cpu xxx,ap=on ...
This feature will be supported for zEC12 and newer CPU models.
The feature will not be supported for older models because
there are few older systems on which to test and the older
crypto cards will be going out of service in the relatively
near future.
CPU model facilities:
1. The S390_FEAT_AP_QUERY_CONFIG_INFO feature indicates whether the
AP Query Configuration Information (QCI) facility is available
to the guest as determined by whether the facility is available
on the host. This feature will be exposed by KVM only if the
QCI facility is installed on the host.
2. The S390_FEAT_AP_FACILITY_TEST feature indicates whether the AP
Facility Test (APFT) facility is available to the guest as
determined by whether the facility is available on the host.
This feature will be exposed by KVM only if APFT is installed
on the host.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Tested-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20181010170309.12045-3-akrowiak@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Debug macros that are disabled by default should be avoided (since the
code bit-rots quite easily). Thus turn these debug prints into proper
qemu_log_mask(CPU_LOG_xxx, ...) statements instead. The DPRINTF statements
in do_[ext|io|mchk]_interrupt can even be removed completely since we can
log the information in a central place, s390_cpu_do_interrupt, instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1538751601-7433-1-git-send-email-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
linux-user should always enable AFP, otherwise our emulated binary
might crash once it tries to make use of additional floating-point
registers or instructions.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Alex Bennée <alex.bennee@linaro.org>
Fixes: db0504154e ("s390x/tcg: check for AFP-register, BFP and DFP data exceptions")
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Tested-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Updating the NS stack pointer via MSR to SP_NS should include
a check whether the new SP value is below the stack limit.
No other kinds of update to the various stack pointer and
limit registers via MSR should perform a check.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181002163556.10279-14-peter.maydell@linaro.org
Add the v8M stack checks for the VLDM/VSTM
(aka VPUSH/VPOP) instructions. This code is currently
unreachable because we haven't yet implemented M profile
floating point support, but since the change is simple,
we add it now because otherwise we're likely to forget to
do it later.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181002163556.10279-13-peter.maydell@linaro.org
Add v8M stack checks for the 16-bit Thumb push/pop
encodings: STMDB, STMFD, LDM, LDMIA, LDMFD.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181002163556.10279-12-peter.maydell@linaro.org
Add v8M stack checks for the instructions in the T32
"load/store single" encoding class: these are the
"immediate pre-indexed" and "immediate, post-indexed"
LDR and STR instructions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181002163556.10279-11-peter.maydell@linaro.org
Add the v8M stack checks for:
* LDM (T2 encoding)
* STM (T2 encoding)
This includes the 32-bit encodings of the instructions listed
in v8M ARM ARM rule R_YVWT as
* LDM, LDMIA, LDMFD
* LDMDB, LDMEA
* POP (multiple registers)
* PUSH (muliple registers)
* STM, STMIA, STMEA
* STMDB, STMFD
We perform the stack limit before doing any other part
of the load or store.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181002163556.10279-10-peter.maydell@linaro.org
Add the v8M stack checks for:
* LDRD (immediate)
* STRD (immediate)
Loads and stores are more complicated than ADD/SUB/MOV, because we
must ensure that memory accesses below the stack limit are not
performed, so we can't simply do the check when we actually update
SP.
For these instructions, if the stack limit check triggers
we must not:
* perform any memory access below the SP limit
* update PC, SP or the load/store base register
but it is IMPDEF whether we:
* perform any accesses above or equal to the SP limit
* update destination registers for loads
For QEMU we choose to always check the limit before doing any other
part of the load or store, so we won't update any registers or
perform any memory accesses.
It is UNKNOWN whether the limit check triggers for a load or store
where the initial SP value is below the limit and one of the stores
would be below the limit, but the writeback moves SP to above the
limit. For QEMU we choose to trigger the check in this situation.
Note that limit checks happen only for loads and stores which update
SP via writeback; they do not happen for loads and stores which
simply use SP as a base register.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181002163556.10279-9-peter.maydell@linaro.org
Check the v8M stack limits when pushing the frame for a
non-secure function call via BLXNS.
In order to be able to generate the exception we need to
promote raise_exception() from being local to op_helper.c
so we can call it from helper.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181002163556.10279-8-peter.maydell@linaro.org
Add checks for breaches of the v8M stack limit when the
stack pointer is decremented to push the exception frame
for exception entry.
Note that the exception-entry case is unique in that the
stack pointer is updated to be the limit value if the limit
is hit (per rule R_ZLZG).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181002163556.10279-7-peter.maydell@linaro.org
Add some comments to the Thumb decoder indicating what bits
of the instruction have been decoded at various points in
the code.
This is not an exhaustive set of comments; we're gradually
adding comments as we work with particular bits of the code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181002163556.10279-6-peter.maydell@linaro.org
Add code to insert calls to a helper function to do the stack
limit checking when we handle these forms of instruction
that write to SP:
* ADD (SP plus immediate)
* ADD (SP plus register)
* SUB (SP minus immediate)
* SUB (SP minus register)
* MOV (register)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181002163556.10279-5-peter.maydell@linaro.org
We're going to want v7m_using_psp() in op_helper.c in the
next patch, so move it from helper.c to internals.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181002163556.10279-4-peter.maydell@linaro.org
Define EXCP_STKOF, and arrange for it to cause us to take
a UsageFault with CFSR.STKOF set.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181002163556.10279-3-peter.maydell@linaro.org
The Arm v8M architecture includes hardware stack limit checking.
When certain instructions update the stack pointer, if the new
value of SP is below the limit set in the associated limit register
then an exception is taken. Add a TB flag that tracks whether
the limit-checking code needs to be emitted.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181002163556.10279-2-peter.maydell@linaro.org
There is quite a lot of code required to compute cpu_mem_index,
or even put together the full TCGMemOpIdx. This can easily be
done at translation time.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This implements the feature for softmmu, and moves the
main loop out of a macro and into a function.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fixes the endianness problem for softmmu, and moves
the main loop out of a macro and into an inlined function.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fixes the endianness problem for softmmu, and moves
the main loop out of a macro and into an inlined function.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We can choose the endianness at translation time, rather than
re-computing it at execution time.
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We can choose the endianness at translation time, rather than
re-computing it at execution time.
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fixes the endianness problem for softmmu, and moves the
main loop out of a macro and into an inlined function.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the same *_tlb primitives as we use for ld1.
For linux-user, this hoists the set of helper_retaddr. For softmmu,
hoists the computation of the current mmu_idx outside the loop,
fixes the endianness problem, and moves the main loop out of a
macro and into an inlined function.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Uses tlb_vaddr_to_host for correct operation with softmmu.
Optimize for accesses within a single page or pair of pages.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 16-byte load only uses 16 predicate bits. But while
reusing the other load infrastructure, we find other bits
that are set and trigger an assert. To avoid this and
retain the assert, zero-extend the predicate that we pass
to the LD1 helper.
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the existing helpers to determine if (1) the fpu is enabled,
(2) sve state is enabled, and (3) the current sve vector length.
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
SVE vector length can change when changing EL, or when writing
to one of the ZCR_ELn registers.
For correctness, our implementation requires that predicate bits
that are inaccessible are never set. Which means noticing length
changes and zeroing the appropriate register bits.
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We are going to want to determine whether sve is enabled
for EL other than current.
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Check for EL3 before testing CPTR_EL3.EZ. Return 0 when the exception
should be routed via AdvSIMDFPAccessTrap. Mirror the structure of
CheckSVEEnabled more closely.
Fixes: 5be5e8eda7
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Given that the only field defined for this new register may only
be 0, we don't actually need to change anything except the name.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181005175350.30752-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A cut-and-paste error meant we were reading r4 from the v8M
callee-saves exception stack frame twice. This is harmless
since it just meant we did two memory accesses to the same
location, but it's unnecessary. Delete it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181002150304.2287-1-peter.maydell@linaro.org
In v7m_exception_taken() we were incorrectly using a
"LR bit EXCRET.ES is 1" check when it should be 0
(compare the pseudocode ExceptionTaken() function).
This meant we didn't stack the callee-saved registers
when tailchaining from a NonSecure to a Secure exception.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181002145940.30931-1-peter.maydell@linaro.org
The parameter of kvm_arm_init_cpreg_list() is ARMCPU instead of
CPUState, so correct the note to make it match the code.
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Message-id: 1538069046-5757-1-git-send-email-gengdongjiu@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We can fit this nicely into less LOC, without harming readability.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180927130303.12236-10-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Valid register pairs are 0/2, 1/3, 4/6, 5/7, 8/10, 9/11, 12/14, 13/15.
R1/R2 always selects the lower number, so the current checks are not
correct as e.g. 2/4 could be selected as a pair.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180927130303.12236-9-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's check this also at a central place.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180927130303.12236-8-david@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
With the annotated functions, we can now easily check this at a central
place.
DXC 1 is to be injected if an AFP register is used (for a HFP AND FPS
instruction) when AFP is disabled.
DXC 2 is to be injected if a BFP instruction is used when AFP is
disabled.
DXC 3 is to be injected if a DFP instruction is used when AFP is
disabled.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180927130303.12236-7-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
These flags allow us to later on detect if a DATA program interrupt
is to be injected, and which DXC (1,2,3) is to be used.
Interestingly, some support FP instructions are considered as HFP
instructions (I assume simply because they were available very early).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180927130303.12236-6-david@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Storing flags for instructions allows us to efficiently verify certain
properties at a central point. Examples might later be handling if
AFP is disabled in CR0, we are not in problem state, or if vector
instructions are disabled in CR0.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180927130303.12236-5-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We exit the TB when changing the control registers, so just like PSW
bits, this should always be consistent for a TB.
Using the PSW bit semantic makes things a lot easier compared to
manually defining the spare, shifted bits.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180927130303.12236-4-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The DXC is to be stored in the low core, and only in the FPC in case AFP
is enabled in CR0. Stub is not required in current code, but this way
we never run into problems.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180927130303.12236-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Move it into TCG-only code and provide a stub. Turn it into noreturn.
As Richard noted, we currently don't log the psw.addr before restoring
the state, fix that by moving (duplicating) the qemu_log_mask in the
tcg/kvm handlers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180927130303.12236-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Both LPSW and LPSWE should raise a specification exception when their
operand is not doubleword aligned.
Signed-off-by: Pavel Zbitskiy <pavel.zbitskiy@gmail.com>
Message-Id: <20180902003322.3428-3-pavel.zbitskiy@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
As the kernel has no way of disallowing the start of a huge page
backed VM, we can migrate a running huge backed VM to a host that has
no huge page KVM support.
Let's glue huge page support support to the 3.1 machine, so we do not
migrate to a destination host that doesn't have QEMU huge page support
and can stop migration if KVM doesn't indicate support.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20180928093435.198573-1-frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This patch fixes the checking of boundary crossing instructions.
In icount mode only first instruction of the block may cross
the page boundary to keep the translation deterministic.
These conditions already existed, but compared the wrong variable.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <20180920071702.22477.43980.stgit@pasha-VirtualBox>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While at it, also rename var to indicate it is not used only in KVM.
Reviewed-by: Nikita Leshchenko <nikita.leshchenko@oracle.com>
Reviewed-by: Patrick Colp <patrick.colp@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20180914003827.124570-2-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This flag will be used for KVM's nested VMX migration; the HF_GUEST_MASK name
is already used in KVM, adopt it in QEMU as well.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Interrupt handling depends on various flags in env->hflags or env->hflags2,
and the exact detail were not exactly replicated between x86_cpu_has_work
and x86_cpu_exec_interrupt. Create a new function that extracts the
highest-priority non-masked interrupt, and use it in both functions.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
And convert it to a bool to use an existing hole
in the struct.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The AMD IOMMU does not (yet) support interrupt remapping. But
kvm_arch_fixup_msi_route assumes that all implementations do and crashes
when the AMD IOMMU is used in KVM mode.
Fixes: 8b5ed7dffa ("intel_iommu: add support for split irqchip")
Reported-by: Christopher Goldsworthy <christopher.goldsworthy@outlook.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-Id: <48ae78d8-58ec-8813-8680-6f407ea46041@siemens.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- mark instructions that affect active IRQ level;
- put call for gen_check_interrupts right after the instruction
translation; when FLIX is enabled it will need to appear before
other exits from the TB as well;
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Now that all logic for TB termination is extracted from rsr/wsr their
return value is not used and may be dropped.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
- mark instructions that require TB termination via slot 0;
- put TB termination right after the instruction translation loop, if
termination w/o TB linking wasn't requested;
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Currently we only end TB in icount mode, because access to CCOUNT or
write to CCOMPARE are IO operations. Simplify the behaviour a bit and
end TB unconditionally.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Opcode decoding with libisa takes care about range of valid group SRs,
like CCOMPARE, IBREAKA, DBREAKA or DBREAKC. Turn range checks in wsr
implementations into assertions.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
- mark all instructions that exit TB and require dynamic search for the
next TB;
- put TB termination right after the instruction translation loop;
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
- mark quos/quou/rems/remu instructions;
- drop parameter 0 from the translate_quou and split translate_remu from
it;
- put test for division by zero exception right after the coprocessor
exception test;
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
- add XtensaOpcodeOps::coprocessor with bitmask of coprocessors used by
the instruction;
- replace coprocessor id parameter of gen_check_cpenable with the
bitmask of used coprocessors;
- collect coprocessor IDs used by an instruction in the disassembly
loop;
- put test for coprocessor disabled exception after the alloca test;
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
- mark retw and retw.n instructions;
- extract window inderflow test from retw helper;
- put underflow exception check generation right after the overflow
check;
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
- add ps.callinc to the TB flags, that allows testing all instructions
for window overflow statically;
- drop gen_window_check* functions; replace them with get_window_check
that accepts bitmask of used registers;
- add XtensaOpcodeOps::test_overflow that returns bitmask of implicitly
used registers; use it for entry and call{,x}{4,8,12};
- drop window overflow test from the entry helper;
- drop parameter 0 from translate_[di]cache and use translate_nop for
d/i cache opcodes that don't need memory accessibility check;
- add bitmask XtensaOpcodeOps::windowed_register_op that marks opcode
arguments that refer to windowed registers;
- translate windowed_register_op mask to a mask of actually used
registers in the disassembly loop;
- add check for window overflow right after the check for debug
exception;
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
- mark break and break.n instructions;
- collect debug cause bits from parameter 0 of instructions marked for
debug exception;
- put debug exception check right after syscall check;
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
- mark privileged instructions;
- put single privileged instruction check after disassembly loop;
- translate_[di]cache: drop parameter 0, shift parameters one down;
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
- TB flags: add XTENSA_TBFLAG_CWOE that corresponds to the architectural
CWOE state;
- entry: move CWOE check from the helper to the test_ill_entry;
- retw: move CWOE check from the helper to the test_ill_retw;
- separate instruction disassembly loop and translation loop; save
disassembly results in local array;
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
The ARMv8 architecture defines that an AArch32 CPU starts
in SVC mode, unless EL2 is the highest available EL, in
which case it starts in Hyp mode. (In ARMv7 a CPU with EL2
but not EL3 was not a valid configuration, but we don't
specifically reject this if the user asks for one.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20180823135047.16525-1-peter.maydell@linaro.org
Not only are the sve-related tb_flags fields unused when SVE is
disabled, but not all of the cpu registers are initialized properly
for computing same. This can corrupt other fields by ORing in -1,
which might result in QEMU crashing.
This bug was not present in 3.0, but this patch is cc'd to
stable because adf92eab90 where the bug was
introduced was marked for stable.
Fixes: adf92eab90
Cc: qemu-stable@nongnu.org (3.0.1)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Here are the accumulated ppc target patches for the last several
weeks. Highlights are:
* A number of 40p / PReP cleanups
* Preliminary irq rework on the pseries machine towards the new
XIVE interrupt controller
There are a few patches which make small changes to generic device and
arm code as prerequisites to the 40p interrupt routing cleanup. They
have acks from the relevant maintainers.
-----BEGIN PGP SIGNATURE-----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=A62f
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.1-20180925' into staging
ppc patch queue 2018-09-25
Here are the accumulated ppc target patches for the last several
weeks. Highlights are:
* A number of 40p / PReP cleanups
* Preliminary irq rework on the pseries machine towards the new
XIVE interrupt controller
There are a few patches which make small changes to generic device and
arm code as prerequisites to the 40p interrupt routing cleanup. They
have acks from the relevant maintainers.
# gpg: Signature made Tue 25 Sep 2018 08:00:06 BST
# gpg: using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-3.1-20180925:
40p: add fixed IRQ routing for LSI SCSI device
lsi53c895a: add optional external IRQ via qdev
scsi: remove unused lsi53c895a_create() and lsi53c810_create() functions
scsi: move lsi53c8xx_create() callers to lsi53c8xx_handle_legacy_cmdline()
scsi: add lsi53c8xx_handle_legacy_cmdline() function
sm501: Adjust endianness of pixel value in rectangle fill
spapr_pci: add an extra 'nr_msis' argument to spapr_populate_pci_dt
spapr: increase the size of the IRQ number space
spapr: introduce a spapr_irq class 'nr_msis' attribute
40p: use OR gate to wire up raven PCI interrupts
raven: some minor IRQ-related tidy-ups
hw/ppc: on 40p machine, change default firmware to OpenBIOS
target/ppc/cpu-models: Re-group the 970 CPUs together again
Record history of ppcemb target in common.json
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The addition of the POWER9 CPUs divided the entries for the 970 CPUs,
which is a little bit confusing when you look at the code. So let's
re-group the 970 CPUs together again, and since these chips have been
based on the POWER4 processor, move them also in front of the POWER5
chips now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Here's another pull request for qemu-3.1. No real theme here, just an
assortment of various fixes. Probably the most notable thing is the
removal of the ppcemb target which has been deprecated for some time
now.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEdfRlhq5hpmzETofcbDjKyiDZs5IFAluSKPoACgkQbDjKyiDZ
s5JSpRAAhWvxLM6OoTdhAaPKhlKrIzWexWNI8efJNWfXvHnbHBxs8tk+hnJOZVsU
m00hfFMKMA0/4JMURrbYsCiyaq+r+Ws8oEbLDVKQdng6LNeUrLq7uC0rv41bW3CC
1BTqTX16lvhPsg1Sz8mh6IGwCIgRiV8zgvQ4iCc3GCJidI2A+3uLvW5hAndvDdjb
3lq6drg23LXZ6z/ou7hPynKmV6tFTlxSnB957LCnPGFACZeJKbuoRHPP30IrWwY+
nOQ1GTvenouGvEKI5gsC13qFWYcoNPPfc7NZFtx1fvxiMpkOj7R5hg9oStT2Ya6u
MVRwcp/XA2MF+2NnJ8TZOkAV7+1JidhRirsKFjcn1JqftWSxJOKA0weWuNQgdQNY
lJzyZZejEJCHn0NgOq9ZRjOP4U6iIcSlTurfXoronhw1q7yEBkYkS+JpLToLLsid
9qwxlBAfUfQ8E1wR8RnM6ATygVp2Z2ToL+70Rc7xzq6/R8kYFSzuhyaI1GUUtPGW
ZPwp3GRYWJE/xOK3z1YAndrN8FlNxqz3Cov3vtH118aBatWAT+PRVlouOB1/aF3T
KfV8Kme5KQrMGuj/RDLGLOeQi0e8wqBtVIhsESpHdocC6uo28H5gNXxptyLJPA04
dJwWvaQf/J7eIuChhuFygiTzMnQyJA1f77jlExpKfxKKQwUpHf4=
=WnE4
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.1-20180907' into staging
ppc patch queue 2018-09-07
Here's another pull request for qemu-3.1. No real theme here, just an
assortment of various fixes. Probably the most notable thing is the
removal of the ppcemb target which has been deprecated for some time
now.
# gpg: Signature made Fri 07 Sep 2018 08:30:02 BST
# gpg: using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-3.1-20180907:
target-ppc: Extend HWCAP2 bits for ISA 3.0
target/ppc/kvm: set vcpu as online/offline
Fix a deadlock case in the CPU hotplug flow
spapr: Correct reference count on spapr-cpu-core
mac_newworld: implement custom FWPathProvider
uninorth: add ofw-addr property to allow correct fw path generation
mac_oldworld: implement custom FWPathProvider
grackle: set device fw_name and address for correct fw path generation
macio: add addr property to macio IDE object
macio: add macio bus to help with fw path generation
macio: move MACIOIDEState type declarations to macio.h
spapr_pci: fix potential NULL pointer dereference
spapr: fix leak of rev array
ppc: Remove deprecated ppcemb target
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAluQU38ACgkQIeENKd+X
cFRAXQgAlhNcwby+Jsk8sbLajMWXEtww9FIv+XESldPOJHmJyCkNDVZX8MuMM7+f
8NraD3YGDJvXP/BEcmyE5yPC6mx+OIi8ufzqP0rUML1x4+Tpxp8nZ7sBH197RtGg
eImPA6oKvg4wyfNOrZ+hGa8HF/iMT03TqeKggUPf3dVAs8LV2iUwBIzrRLB4IhIN
yFnhbcw8cW04tWUhYg4+viDY2k0q7fMrJZkASD/RjGMBjubJkwWvSYOdMIEWSpcG
2qLT5SohzUzHyKPONsoBKjSIP+nKgtyYR6IJh40FDd5S5RRMHe/n3q9jChIkHMma
x1eSNvVd41++QlBKqDeAlA+gbdK/uw==
=FJn/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-pullreq-20180905' into staging
A misc collection of RISC-V related patches for 3.1.
# gpg: Signature made Wed 05 Sep 2018 23:06:55 BST
# gpg: using RSA key 21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* remotes/alistair/tags/pull-riscv-pullreq-20180905:
riscv: remove define cpu_init()
hw/riscv/spike: Set the soc device tree node as a simple-bus
hw/riscv/virtio: Set the soc device tree node as a simple-bus
target/riscv: call gen_goto_tb on DISAS_TOO_MANY
target/riscv: optimize indirect branches
target/riscv: optimize cross-page direct jumps in softmmu
RISC-V: Simplify riscv_cpu_local_irqs_pending
RISC-V: Use atomic_cmpxchg to update PLIC bitmaps
RISC-V: Improve page table walker spec compliance
RISC-V: Update address bits to support sv39 and sv48
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Complete xtensa-semi chardev console implementation: allow reading input
characters from file descriptor 0 and call sys_select_one simcall on it.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
s32c1i must load and store value with target endianness, not host.
This results in an infinite loop in atomic cmpxchg sequences when target
endianness doesn't match host endianness.
Fixes: 9fb40342d4 ("target/xtensa: support MTTCG")
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
- FPU2000 defines rfr and wfr opcodes, not rfr.s and wfr.s;
- movcond.s uses incorrect operand in tcg_gen_movcond: in case the
condition is not satisfied it must not change its argument 0.
Fixes: c04e1692e3 ("target/xtensa: extract FPU2000 opcode
translators")
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
cpu_init() was removed since 2.12, so drop the define that is now unused.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Performance impact of this and the previous commits, measured with
the very-easy-to-cross-compile rv8-bench:
https://github.com/rv8-io/rv8-bench
Host: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz
- Key:
before: master
after1,2,3: the 3 commits in this series (i.e. 3 is this commit)
- User-mode:
bench before after1 after2 after3 final speedup
---------------------------------------------------------
aes 1.12s 1.12s 1.10s 1.00s 1.12
bigint 0.78s 0.78s 0.78s 0.78s 1
dhrystone 0.96s 0.97s 0.49s 0.49s 1.9591837
miniz 1.94s 1.94s 1.88s 1.86s 1.0430108
norx 0.51s 0.51s 0.49s 0.48s 1.0625
primes 0.85s 0.85s 0.84s 0.84s 1.0119048
qsort 4.87s 4.88s 1.86s 1.86s 2.6182796
sha512 0.76s 0.77s 0.64s 0.64s 1.1875
(after1 only applies to softmmu, so no surprises here)
- Full-system (fedora):
bench before after1 after2 after3 final speedup
---------------------------------------------------------
aes 2.68s 2.54s 2.60s 2.34s 1.1452991
bigint 1.61s 1.56s 1.55s 1.64s 0.98170732
dhrystone 1.78s 1.67s 1.25s 1.24s 1.4354839
miniz 3.53s 3.35s 3.28s 3.35s 1.0537313
norx 1.13s 1.09s 1.07s 1.06s 1.0660377
primes 15.37s 15.41s 15.20s 15.37s 1
qsort 7.20s 6.71s 3.85s 3.96s 1.8181818
sha512 1.07s 1.04s 0.90s 0.90s 1.1888889
SoftMMU slows things down, so the numbers are less sensitive.
Cross-page jumps improve things a little bit, though.
Note that I'm not showing here averages, just results from a
single run, so with primes there isn't much to worry about.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Set the newly added register(KVM_REG_PPC_ONLINE) to indicate if the vcpu is
online(1) or offline(0)
KVM will use this information to set the RWMR register, which controls the PURR
and SPURR accumulation.
CC: paulus@samba.org
Signed-off-by: Nikunj A Dadhania <nikunj@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This commit is intended to improve readability.
There is no change to the logic.
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- Inline PTE_TABLE check for better readability
- Change access checks from ternary operator to if
- Improve readibility of User page U mode and SUM test
- Disallow non U mode from fetching from User pages
- Add reserved PTE flag check: W or W|X
- Add misaligned PPN check
- Set READ protection for PTE X flag and mstatus.mxr
- Use memory_region_is_ram in pte update
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In a few places translate.c contains non-breaking spaces (0xc2 0xa0)
instead of regular ones (0x20):
7c 7c c2 a0 63 63
7c 7c 20 63 63
| | c c
This confuses some text editors.
Signed-off-by: Pavel Zbitskiy <pavel.zbitskiy@gmail.com>
Message-Id: <20180822144039.5796-2-pavel.zbitskiy@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
PACK fails on the test from the Principles of Operation: F1F2F3F4
becomes 0000234C instead of 0001234C due to an off-by-one error.
Furthermore, it overwrites one extra byte to the left of F1.
If len_dest is 0, then we only want to flip the 1st byte and never loop
over the rest. Therefore, the loop condition should be > and not >=.
If len_src is 1, then we should flip the 1st byte and pack the 2nd.
Since len_src is already decremented before the loop, the first
condition should be >=, and not >.
Likewise for len_src == 2 and the second condition.
Signed-off-by: Pavel Zbitskiy <pavel.zbitskiy@gmail.com>
Message-Id: <20180821025104.19604-7-pavel.zbitskiy@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Improves "b213c9f5: target/s390x: Implement TRTR" by introducing the
intermediate functions, which are compatible with dx_helper type.
Signed-off-by: Pavel Zbitskiy <pavel.zbitskiy@gmail.com>
Message-Id: <20180821025104.19604-6-pavel.zbitskiy@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Suppose psw.mask=0x0000000080000000, cc=2, r1=0 and we do "ipm 1".
This command must touch only bits 32-39, so the expected output
is r1=0x20000000. However, currently qemu yields r1=0x20008000,
because irrelevant parts of PSW leak into r1 during program mask
transfer.
Signed-off-by: Pavel Zbitskiy <pavel.zbitskiy@gmail.com>
Message-Id: <20180821025104.19604-5-pavel.zbitskiy@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
CSST is defined as:
C(0xc802, CSST, SSF, CASS, la1, a2, 0, 0, csst, 0)
It means that the first parameter is handled by in1_la1().
in1_la1() fills addr1 field, and not in1.
Furthermore, when extract32() is used for the alignment check, the
third parameter should specify the number of trailing bits that must
be 0. For FC these numbers are:
FC=0 (word, 4 bytes): 2
FC=1 (double word, 8 bytes): 3
FC=2 (quad word, 16 bytes): 4
For SC these numbers correspond to the size:
SC=0: 0
SC=1: 1
SC=2: 2
SC=3: 3
SC=4: 4
Signed-off-by: Pavel Zbitskiy <pavel.zbitskiy@gmail.com>
Message-Id: <20180821025104.19604-4-pavel.zbitskiy@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
These instructions are provided for compatibility purposes and are
used only by old software, in the new code BAS and BASR are preferred.
The difference between the old and new instruction exists only in the
24-bit mode.
In addition, fix BAS polluting high 32 bits of the first operand in
24- and 31-bit addressing modes.
Signed-off-by: Pavel Zbitskiy <pavel.zbitskiy@gmail.com>
Message-Id: <20180821025104.19604-3-pavel.zbitskiy@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
There is no known available OS for ppc around anymore that uses page
sizes below 4k, so it does not make much sense that we keep wasting
our time on building and testing the ppcemb-softmmu target. It has
been deprecated since two releases, and nobody complained, so let's
remove this now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add definition of the first nanoMIPS processor in QEMU.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Fix ERET/ERETNC so that ADEL exception can be raised.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Update BadInstr and BadInstrX registers for nanoMIPS. The same
support for pre-nanoMIPS remains unimplemented.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
A set of nanoMIPS instructions is not available if Config5 bit NMS
is set.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add emulation of DSP ASE instructions for nanoMIPS - part 6.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Add emulation of DSP ASE instructions for nanoMIPS - part 5.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Add emulation of DSP ASE instructions for nanoMIPS - part 4.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Add emulation of DSP ASE instructions for nanoMIPS - part 3.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Add emulation of DSP ASE instructions for nanoMIPS - part 2.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Add emulation of DSP ASE instructions for nanoMIPS - part 1.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Add emulation of MT ASE instructions for nanoMIPS.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Use bits from configuration registers for availability control
of MT ASE instructions, rather than only ISA_MT bit in insn_flags.
This is done by adding a field in hflags for MT bit, and adding
functions check_mt() and check_cp0_mt().
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Add emulation of various flavors of nanoMIPS 32-bit branch
instructions.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Implement support for nanoMIPS LLWP/SCWP instructions. Beside
adding core functionality of these instructions, this patch adds
support for availability control via configuration bit XNP.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Dimitrije Nikolic <dnikolic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Add CP0_Config3 and CP0_Config5 to DisasContext structure. This is
needed for implementing availability control of various instructions.
Reviewed-by: "Aleksandar Markovic <amarkovic@wavecomp.com>"
Signed-off-by: "Aleksandar Markovic <amarkovic@wavecomp.com>"
Add emulation of various nanoMIPS load and store instructions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Implement emulation of nanoMIPS EXTW instruction. EXTW instruction
is similar to the MIPS r6 ALIGN instruction, except that it counts
the other way and in bits instead of bytes. We therefore generalise
gen_align() function into a new gen_align_bits() function (which
counts in bits instead of bytes and optimises when bits = size of
the word), and implement gen_align() and a new gen_ext() based on
that. Since we need to know the word size to check for when the
number of bits == the word size, the opc argument is replaced with
a wordsz argument (either 32 or 64).
Signed-off-by: James Hogan <james.hogan@mips.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Added a helper for ROTX based on the pseudocode from the
architecture spec. This instraction was not present in previous
MIPS instruction sets.
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Add emulation of nanoMIPS instructions situated in pool p_lsx, and
emulation of LSA instruction as well.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Add emulation of misc nanoMIPS instructions situated in pool32axf.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Add emulation of nanoMIPS instructions that are situated in pool32a0.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Add emulation of basic floating point arithmetic for nanoMIPS.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Add emulation of LI48, ADDIU48, ADDIUGP48, ADDIUPC48, LWPC48, and
SWPC48 instructions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Add emulation of nanoMIPS instructions MOVE.P and MOVE.PREV.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Add emulation of SIGRIE, SYSCALL, BREAK, SDBBP, ADDIU, ADDIUPC,
ADDIUGP.W, LWGP, SWGP, ORI, XORI, ANDI, and other instructions.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Add emulation of SAVE16 and RESTORE.JRC16 instructions. Routines
gen_save(), gen_restore(), and gen_adjust_sp() are provided to support
this feature.
This patch at the same time provides function gen_op_addr_addi(). This
function will be used in emulation of some other nanoMIPS instructions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Add emulation of NOT16, AND16, XOR16, OR16 instructions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Add emulation of misc nanoMIPS 16-bit instructions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Add emulation of nanoMIPS 16-bit shift instructions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Add emulation of nanoMIPS 16-bit branch instructions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Add emulation of nanoMIPS 16-bit arithmetic instructions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Add some basic utility functions and macros for nanoMIPS decoding
engine.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Add empty body and invocation of decode_nanomips_opc() if the bit
ISA_NANOMIPS32 is set in ctx->insn_flags.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Only if Config3.ISA is 3 (microMIPS), the mode should be switched in
cpu_state_reset(). Config3.ISA is 1 for nanoMIPS processors, and no mode
change should happen.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add nanoMIPS opcodes for DSP ASE instruction pools and instructions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Add nanoMIPS opcodes. nanoMIPS instruction are organized by so-called
instruction pools. Each pool contains a set of opcodes, that in turn
can be instruction opcodes or instruction pool opcodes.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Add ISA_NANOMIPS32 and CPU_NANOMIPS32 preprocessor constants.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Following the bulk conversion of the iwMMXt code, there are
just a handful of hard coded tabs in target/arm; fix them.
This is a whitespace-only patch.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180821165215.29069-4-peter.maydell@linaro.org
Untabify the arm iwmmxt_helper.c. This affects only the iwMMXt code.
We've never touched that code in years, so it's not going to get
fixed up by our "change when touched" process, and a bulk change is
not going to be too disruptive.
This commit was produced using Emacs "untabify" (plus one
by-hand removal of a space to fix a checkpatch nit); it is
a whitespace-only change.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180821165215.29069-3-peter.maydell@linaro.org
Untabify the arm translate.c. This affects only some lines,
mostly comments, in the iwMMXt code. We've never touched
that code in years, so it's not going to get fixed up
by our "change when touched" process, and a bulk change
is not going to be too disruptive.
This commit was produced using Emacs "untabify"; it is
a whitespace-only change.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180821165215.29069-2-peter.maydell@linaro.org
On 32-bit exception entry, CPSR.J must always be set to 0
(see v7A Arm ARM DDI0406C.c B1.8.5). CPSR.IL must also
be cleared on 32-bit exception entry (see v8A Arm ARM
DDI0487C.a G1.10).
Clear these bits. (This fixes a bug which will never be noticed
by non-buggy guests.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180820153020.21478-6-peter.maydell@linaro.org
Implement the necessary support code for taking exceptions
to Hyp mode in AArch32.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180820153020.21478-5-peter.maydell@linaro.org
Factor out the code which changes the CPU state so as to
actually take an exception to AArch32. We're going to want
to use this for handling exception entry to Hyp mode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180820153020.21478-4-peter.maydell@linaro.org
The AArch32 HCR and HCR2 registers alias HCR_EL2
bits [31:0] and [63:32]; implement them.
Since HCR2 exists in ARMv8 but not ARMv7, we need new
regdef arrays for "we have EL3, not EL2, we're ARMv8"
and "we have EL2, we're ARMv8" to hold the definitions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180820153020.21478-3-peter.maydell@linaro.org
The v8 AArch32 HACTLR2 register maps to bits [63:32] of ACTLR_EL2.
We implement ACTLR_EL2 as RAZ/WI, so make HACTLR2 also RAZ/WI.
(We put the regdef next to ACTLR_EL2 as a reminder in case we
ever make ACTLR_EL2 something other than RAZ/WI).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180820153020.21478-2-peter.maydell@linaro.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814002653.12828-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814002653.12828-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* qumu-guest-agent freeze-hook tweak (Christian)
* pm_smbus improvements (Corey)
* Move validation to pre_plug for pc-dimm (David)
* Fix memory leaks (Eduardo, Marc-André)
* synchronization profiler (Emilio)
* Convert the CPU list to RCU (Emilio)
* LSI support for PPR Extended Message (George)
* vhost-scsi support for protection information (Greg)
* Mark mptsas as a storage device in the help (Guenter)
* checkpatch tweak cherry-picked from Linux (me)
* Typos, cleanups and dead-code removal (Julia, Marc-André)
* qemu-pr-helper support for old libmultipath (Murilo)
* Annotate fallthroughs (me)
* MemoryRegionOps cleanup (me, Peter)
* Make s390 qtests independent from libqos, which doesn't actually support it (me)
* Make cpu_get_ticks independent from BQL (me)
* Introspection fixes (Thomas)
* Support QEMU_MODULE_DIR environment variable (ryang)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAlt+5OYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPtxwf8CQM/F+0L+EKeYfYcVgVZsDhhOkLj
Pm61q0bZsWKLby5jCqIDYw7Z/vodJnSS1DO0slIRoXxvQ9DwlkbBnBy/aG/E9U0q
WF1vbCezibDIt7sGcsu9F5zXU9eqe+E6dZfxFrv8FQSOFVxn34TfeJagWLCtzg0d
LnVTF/e4zJD8IQiM7w6lJQxua3fz13ssPEg2KnMkguDhACMwvZ/K/cA2AJkHRMhY
sroPMwLHlrF1NOoeCIrWxYUmSGCRCAy1DmiPGiiSs0yBq/dL0UkAa5Eu6HMQ7rgI
zUff3JDmzEjixUSIEbpVRN+yPCN0/ACSOpJUrKLDxXbc4nZ+PBQ04YpyPQ==
=UZiV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* x86 TCG fixes for 64-bit call gates (Andrew)
* qumu-guest-agent freeze-hook tweak (Christian)
* pm_smbus improvements (Corey)
* Move validation to pre_plug for pc-dimm (David)
* Fix memory leaks (Eduardo, Marc-André)
* synchronization profiler (Emilio)
* Convert the CPU list to RCU (Emilio)
* LSI support for PPR Extended Message (George)
* vhost-scsi support for protection information (Greg)
* Mark mptsas as a storage device in the help (Guenter)
* checkpatch tweak cherry-picked from Linux (me)
* Typos, cleanups and dead-code removal (Julia, Marc-André)
* qemu-pr-helper support for old libmultipath (Murilo)
* Annotate fallthroughs (me)
* MemoryRegionOps cleanup (me, Peter)
* Make s390 qtests independent from libqos, which doesn't actually support it (me)
* Make cpu_get_ticks independent from BQL (me)
* Introspection fixes (Thomas)
* Support QEMU_MODULE_DIR environment variable (ryang)
# gpg: Signature made Thu 23 Aug 2018 17:46:30 BST
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (69 commits)
KVM: cleanup unnecessary #ifdef KVM_CAP_...
target/i386: update MPX flags when CPL changes
i2c: pm_smbus: Add the ability to force block transfer enable
i2c: pm_smbus: Don't delay host status register busy bit when interrupts are enabled
i2c: pm_smbus: Add interrupt handling
i2c: pm_smbus: Add block transfer capability
i2c: pm_smbus: Make the I2C block read command read-only
i2c: pm_smbus: Fix the semantics of block I2C transfers
i2c: pm_smbus: Clean up some style issues
pc-dimm: assign and verify the "addr" property during pre_plug
pc: drop memory region alignment check for 0
util/oslib-win32: indicate alignment for qemu_anon_ram_alloc()
pc-dimm: assign and verify the "slot" property during pre_plug
ipmi: Use proper struct reference for BT vmstate
vhost-scsi: expose 't10_pi' property for VIRTIO_SCSI_F_T10_PI
vhost-scsi: unify vhost-scsi get_features implementations
vhost-user-scsi: move host_features into VHostSCSICommon
cpus: allow cpu_get_ticks out of BQL
cpus: protect TimerState writes with a spinlock
seqlock: add QemuLockable support
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The capability macros are always defined, since they come from kernel
headers that are copied into the QEMU tree. Remove the unnecessary #ifdefs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Iterating over the list without using atomics is undefined behaviour,
since the list can be modified concurrently by other threads (e.g.
every time a new thread is created in user-mode).
Fix it by implementing the CPU list as an RCU QTAILQ. This requires
a little bit of extra work to traverse list in reverse order (see
previous patch), but other than that the conversion is trivial.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20180819091335.22863-12-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The current implementation has three bugs,
* segment limits are not enforced in protected mode if the L bit is set
in the target segment descriptor
* segment limits are not enforced in compatibility mode (ljmp to 32-bit
code segment in long mode)
* #GP(new_cs) is generated rather than #GP(0)
Now the segment limits are enforced if we're not in long mode OR the
target code segment doesn't have the L bit set.
Signed-off-by: Andrew Oates <aoates@google.com>
Message-Id: <20180816011903.39816-1-andrew@andrewoates.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently call gates are always treated as 32-bit gates. In IA-32e mode
(either compatibility or 64-bit submode), system segment descriptors are
always 64-bit. Treating them as 32-bit has the expected unfortunate
effect: only the lower 32 bits of the offset are loaded, the stack
pointer is truncated, a bad new stack pointer is loaded from the TSS (if
switching privilege levels), etc.
This change adds support for 64-bit call gate to the lcall and ljmp
instructions. Additionally, there should be a check for non-canonical
stack pointers, but I've omitted that since there doesn't seem to be
checks for non-canonical addresses in this code elsewhere.
I've left the raise_exception_err_ra lines unwapped at 80 columns to
match the style in the rest of the file.
Signed-off-by: Andrew Oates <aoates@google.com>
Message-Id: <20180819181725.34098-1-andrew@andrewoates.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reported by Coverity:
Error: RESOURCE_LEAK (CWE-772): [#def439]
qemu-2.12.0/target/i386/cpu.c:3179: alloc_fn: Storage is returned from allocation function "qdict_new".
qemu-2.12.0/qobject/qdict.c:34:5: alloc_fn: Storage is returned from allocation function "g_malloc0".
qemu-2.12.0/qobject/qdict.c:34:5: var_assign: Assigning: "qdict" = "g_malloc0(4120UL)".
qemu-2.12.0/qobject/qdict.c:37:5: return_alloc: Returning allocated memory "qdict".
qemu-2.12.0/target/i386/cpu.c:3179: var_assign: Assigning: "props" = storage returned from "qdict_new()".
qemu-2.12.0/target/i386/cpu.c:3217: leaked_storage: Variable "props" going out of scope leaks the storage it points to.
This was introduced by commit b8097deb35 ("i386: Improve
query-cpu-model-expansion full mode").
The leak is only theoretical: if ret->model->props is set to
props, the qapi_free_CpuModelExpansionInfo() call will free props
too in case of errors. The only way for this to not happen is if
we enter the default branch of the switch statement, which would
never happen because all CpuModelExpansionType values are being
handled.
It's still worth to change this to make the allocation logic
easier to follow and make the Coverity error go away. To make
everything simpler, initialize ret->model and ret->model->props
earlier in the function.
While at it, remove redundant check for !prop because prop is
always initialized at the beginning of the function.
Fixes: b8097deb35
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180816183509.8231-1-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Many of these are marked as "intentional/fix required" because they
just need adding a fall through comment. This is exactly what this
patch does, except for target/mips/translate.c where it is easier to
duplicate the code, and hw/audio/sb16.c where I consulted the DOSBox
sources and decide to just remove the LOG_UNIMP before the fallthrough.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Here's my first ppc & spapr pull request for qemu-3.1. This contains
a bunch of things that have accumulated while 3.0 was in freeze.
Highlights are:
* SLOF firmware update
* A number of floating point cleanups from Richard Henderson and
Yasmin Beatriz
* A new model for assigning irq numbers on spapr, this is an
important preliminary step towards implementing the POWER9
"XIVE" interrupt controller
-----BEGIN PGP SIGNATURE-----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=viH7
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.1-20180821' into staging
ppc patch queue 2018-08-21
Here's my first ppc & spapr pull request for qemu-3.1. This contains
a bunch of things that have accumulated while 3.0 was in freeze.
Highlights are:
* SLOF firmware update
* A number of floating point cleanups from Richard Henderson and
Yasmin Beatriz
* A new model for assigning irq numbers on spapr, this is an
important preliminary step towards implementing the POWER9
"XIVE" interrupt controller
# gpg: Signature made Tue 21 Aug 2018 05:32:44 BST
# gpg: using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-3.1-20180821: (26 commits)
ppc: add DBCR based debugging
spapr_pci: factorize the use of SPAPR_MACHINE_GET_CLASS()
mac_newworld: don't use legacy fw_cfg_init_mem() function
mac_oldworld: don't use legacy fw_cfg_init_mem() function
40p: don't use legacy fw_cfg_init_mem() function
qemu-doc: mark ppc/prep machine as deprecated
hw/ppc: deprecate the machine type 'prep', replaced by '40p'
spapr: introduce a IRQ controller backend to the machine
hw/ppc/ppc405_uc: Convert away from old_mmio
hw/ppc/ppc_boards: Don't use old_mmio for ref405ep_fpga
hw/ppc/prep: Remove ifdeffed-out stub of XCSR code
spapr: introduce a fixed IRQ number space
spapr: Add a pseries-3.1 machine type
target/ppc: simplify bcdadd/sub functions
xics: don't include "target/ppc/cpu-qom.h" in "hw/ppc/xics.h"
vfio/spapr: Allow backing bigger guest IOMMU pages with smaller physical pages
target/ppc: bcdsub fix sign when result is zero
target/ppc: Use non-arithmetic conversions for fp load/store
target/ppc: Honor fpscr_ze semantics and tidy fre, fresqrt
target/ppc: Tidy helper_fsqrt
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for DBCR (debug control register) based debugging as used on
BookE ppc. So far supports only branch and single-step events, but these are
the important ones. GDB in Linux guest can now do single-stepping.
Signed-off-by: Roman Kapl <rka@sysgo.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
After solving a corner case in bcdsub, this patch simplifies the logic
of both bcdadd/sub instructions by removing some unnecessary local flags.
This commit also rearranges some if-else conditions in bcdadd to make it
easier to read.
Signed-off-by: Yasmin Beatriz <yasmins@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When the result of bcdsub is equal to zero, the result sign may be
set to negative in some cases, and this does not follow the Power ISA
specifications as to decimal integer arithmetic instructions.
Signed-off-by: Yasmin Beatriz <yasmins@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Memory operations have no side effects on fp state.
The use of a "real" conversions between float64 and float32
would raise exceptions for SNaN and out-of-range inputs.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Divide by zero, exception taken, leaves the destination register
unmodified. Therefore we must raise the exception before returning
from the respective helpers.
>From helper_fre, divide by zero exception not taken, return the
documented +/- 0.5.
At the same time, tidy the invalid exception checking so that we
rely on softfloat for initial argument validation, and select the
kind of invalid operand exception only when we know we must.
At the same time, pass and return float64 values directly rather
than bounce through the CPU_DoubleU union.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Tidy the invalid exception checking so that we rely on softfloat for
initial argument validation, and select the kind of invalid operand
exception only when we know we must. Pass and return float64 values
directly rather than bounce through the CPU_DoubleU union.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Tidy the invalid exception checking so that we rely on softfloat for
initial argument validation, and select the kind of invalid operand
exception only when we know we must. Pass and return float64 values
directly rather than bounce through the CPU_DoubleU union.
Note that because we know float_flag_invalid was set, we do not have
to re-check the signs of the infinities.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Tidy the invalid exception checking so that we rely on softfloat for
initial argument validation, and select the kind of invalid operand
exception only when we know we must. Pass and return float64 values
directly rather than bounce through the CPU_DoubleU union.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Divide by zero, exception taken, leaves the destination register
unmodified. Therefore we must raise the exception before returning
from helper_fdiv. Move the check from do_float_check_status into
helper_fdiv.
At the same time, tidy the invalid exception checking so that we
rely on softfloat for initial argument validation, and select the
kind of invalid operand exception only when we know we must.
At the same time, pass and return float64 values directly rather
than bounce through the CPU_DoubleU union.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
While just setting the MSR bits is sufficient, we can tidy
the helper code by extracting the MSR test to a helper and
then forcing it true for user-only.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
QEMU has had huge page support for a longer time already, but KVM
memory management under s390x needed some changes to work with huge
backings.
Now that we have support, let's enable it if requested and
available. Otherwise we now properly tell the user if there is no
support and back out instead of failing to run the VM later on.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180802070201.257406-1-frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Provide the etoken facility. We need to handle cpu model, migration and
clear reset.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20180731090448.36662-3-borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The "max" CPU model behaves like "-cpu host" when KVM is enabled, and like
a CPU with the maximum possible feature set when TCG is enabled.
While the "host" model can not be used under TCG ("kvm_required"), the
"max" model can and "Enables all features supported by the accelerator in
the current host".
So we can treat "host" just as a special case of "max" (like x86 does).
It differs to the "qemu" CPU model under TCG such that compatibility
handling will not be performed and that some experimental CPU features
not yet part of the "qemu" model might be indicated.
These are right now under TCG (see "qemu_MAX"):
- stfle53
- msa5-base
- zpci
This will result right now in the following warning when starting QEMU TCG
with the "max" model:
"qemu-system-s390x: warning: 'msa5-base' requires 'kimd-sha-512'."
The "qemu" model (used as default in QEMU under TCG) will continue to
work without such warnings. The "max" model in the current form
might be interesting for kvm-unit-tests (where we would e.g. now also
test "msa5-base").
The "max" model is neither static nor migration safe (like the "host"
model). It is independent of the machine but dependends on the accelerator.
It can be used to detect the maximum CPU model also under TCG from upper
layers without having to care about CPU model names for CPU model
expansion.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180725091233.3300-1-david@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
[CH: minor wording changes]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This option has been deprecated for two releases; remove it.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The enumeration type S390FeatGroup is now generated as well.
This shall simplify the definition of new feature groups
without the requirement to modify existing code.
Signed-off-by: Michael Mueller <mimu@linux.ibm.com>
Message-Id: <20180725143617.8731-1-mimu@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
ARMv7VE introduced the ERET instruction, which is necessary to
return from an exception taken to Hyp mode. Implement this.
In A32 encoding it is a completely new encoding; in T32 it
is an adjustment of the behaviour of the existing
"SUBS PC, LR, #<imm8>" instruction.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180814124254.5229-10-peter.maydell@linaro.org
The MSR (banked) and MRS (banked) instructions allow accesses to ELR_Hyp
from either Monitor or Hyp mode. Our translate time check
was overly strict and only permitted access from Monitor mode.
The runtime check we do in msr_mrs_banked_exc_checks() had the
correct code in it, but never got there because of the earlier
"currmode == tgtmode" check. Special case ELR_Hyp.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180814124254.5229-9-peter.maydell@linaro.org
The AArch32 HSR is the equivalent of AArch64 ESR_EL2;
we can implement it by marking our existing ESR_EL2 regdef
as STATE_BOTH. It also needs to be "RES0 from EL3 if
EL2 not implemented", so add the missing stanza to
el3_no_el2_cp_reginfo.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180814124254.5229-8-peter.maydell@linaro.org
The AArch32 virtualization extensions support these fault address
registers:
* HDFAR: aliased with AArch64 FAR_EL2[31:0] and AArch32 DFAR(S)
* HIFAR: aliased with AArch64 FAR_EL2[63:32] and AArch32 IFAR(S)
Implement the accessors for these. This fixes in passing a bug
where we weren't implementing the "RES0 from EL3 if EL2 not
implemented" behaviour for AArch64 FAR_EL2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180814124254.5229-7-peter.maydell@linaro.org
Implement the AArch32 HVBAR register; we can do this just by
making the existing VBAR_EL2 regdefs be STATE_BOTH.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180814124254.5229-5-peter.maydell@linaro.org
ARMCPRegInfo structs will default to .cp = 15 if they
are ARM_CP_STATE_BOTH, but not if they are ARM_CP_STATE_AA32
(because a coprocessor number of 0 is valid for AArch32).
We forgot to explicitly set .cp = 15 for the HMAIR1 and
HAMAIR1 regdefs, which meant they would UNDEF when the guest
tried to access them under cp15.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180814124254.5229-3-peter.maydell@linaro.org
We implement the HAMAIR1 register as RAZ/WI; we had a typo in the
regdef, though, and were incorrectly naming it HMAIR1 (which is
a different register which we also implement as RAZ/WI).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180814124254.5229-2-peter.maydell@linaro.org
If an instruction is conditional (like CBZ) and it is executed
conditionally (using the ITx instruction), a jump to an undefined
label is generated, and QEMU crashes.
CBZ in IT block is an UNPREDICTABLE behavior, but we should not
crash. Honouring the condition code is allowed by the spec in this
case (constrained unpredictable, ARMv8, section K1.1.7), and matches
what we do for other "UNPREDICTABLE inside an IT block" instructions.
Fix the 'skip on condition' code to create a new label only if it
does not already exist. Previously multiple labels were created, but
only the last one of them was set.
Signed-off-by: Roman Kapl <rka@sysgo.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180816120533.6587-1-rka@sysgo.com
[PMM: fixed ^ 1 being applied to wrong argument, fixed typo]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- move register counting to xtensa/gdbstub.c
- add symbolic names for register types and flags from GDB and use them
in register counting and access functions.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
This fixes communication with gdb in the presence of type-5 (TIE state
mapped on user registers) and type-7 (special case of masked registers)
registers in the xtensa core config.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
This fixes java in a linux-user chroot:
$ java --version
qemu-sh4: .../accel/tcg/cpu-exec.c:634: cpu_loop_exec_tb: Assertion `use_icount' failed.
qemu: uncaught target signal 6 (Aborted) - core dumped
Aborted (core dumped)
In gen_conditional_jump() in the GUSA_EXCLUSIVE part, we must reset
base.is_jmp to DISAS_NEXT after the gen_goto_tb() as it is done in
gen_delayed_conditional_jump() after the gen_jump().
Bug: https://bugs.launchpad.net/qemu/+bug/1768246
Fixes: 4834871bc9
("target/sh4: Convert to DisasJumpType")
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <20180811082328.11268-1-laurent@vivier.eu>
Bug fix:
* Some guests may crash when using "-cpu host" due to TOPOEXT,
disable it by default
Features:
* PV_SEND_IPI feature bit
* Icelake-{Server,Client} CPU models
* New CPUID feature bits: PV_SEND_IPI, WBNOINVD, PCONFIG, ARCH_CAPABILITIES
Documentation:
* docs/qemu-cpu-models.texi
-----BEGIN PGP SIGNATURE-----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=uE8w
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-next-pull-request' into staging
x86 queue, 2018-08-16
Bug fix:
* Some guests may crash when using "-cpu host" due to TOPOEXT,
disable it by default
Features:
* PV_SEND_IPI feature bit
* Icelake-{Server,Client} CPU models
* New CPUID feature bits: PV_SEND_IPI, WBNOINVD, PCONFIG, ARCH_CAPABILITIES
Documentation:
* docs/qemu-cpu-models.texi
# gpg: Signature made Fri 17 Aug 2018 02:33:09 BST
# gpg: using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-next-pull-request:
i386: Disable TOPOEXT by default on "-cpu host"
target-i386: adds PV_SEND_IPI CPUID feature bit
i386: Add new CPU model Icelake-{Server,Client}
i386: Add CPUID bit for WBNOINVD
i386: Add CPUID bit for PCONFIG
i386: Add CPUID bit and feature words for IA32_ARCH_CAPABILITIES MSR
i386: Add new MSR indices for IA32_PRED_CMD and IA32_ARCH_CAPABILITIES
docs: add guidance on configuring CPU models for x86
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbdbIoAAoJENSXKoln91pl9KwIAJQ0CB4V/eRlvPOj828qLJyt
FxCETpCKBD1mSRX80E2HdYdaj8KfhhKrd9R2Wrk2VsiTQhLA0+hYsLxuT8VfPjsX
8WSN7egxzzA8Hzm1+wbwFCDNL13xjuhHWPk9YA1RYS6eQJot/Y27KYfvt/OPTrBO
jGaTmvXOE9q3qXZczP2TwipYkehg1+Ss5ZJl7dUmHc3Iek5t/H+kumkhBPoJqwAQ
wcwQuPm2KRGLuq9aB2IVbtfJA5Rme1GMFDWZicitJX2uK+Mx76fgi9IorrW6XAyM
6LM8DjvrivxW+UgZ+3QdJKkQCbyIrXqDAp1MRd3CWMlB576WWKm6RUTZclSo9gI=
=m1CJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-aug-2018' into staging
MIPS queue Aug 16, 2018
# gpg: Signature made Thu 16 Aug 2018 18:19:36 BST
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-aug-2018:
qemu-doc: Amend MIPS-related items
linux-user: Add preprocessor availability control to some syscalls
linux-user: Update MIPS syscall numbers up to kernel 4.18 headers
elf: Add ELF flags for MIPS machine variants
elf: Remove duplicate preprocessor constant definition
target/mips: Check ELPA flag only in some cases of MFHC0 and MTHC0
target/mips: Don't update BadVAddr register in Debug Mode
target/mips: Implement CP0 Config1.WR bit functionality
target/mips: Add CP0 BadInstrX register
target/mips: Update some CP0 registers bit definitions
target/mips: Fix two instances of shadow variables
target/mips: Mark switch fallthroughs with interpretable comments
target/mips: Avoid case statements formulated by ranges - part 2
target/mips: Avoid case statements formulated by ranges - part 1
MAINTAINERS: Update target/mips maintainer's email addresses
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
MFHC0 and MTHC0 used to handle EntryLo0 and EntryLo1 registers only,
and placing ELPA flag checks before switch statement were technically
correct. However, after adding handling more registers, these checks
should be moved to act only in cases of handling EntryLo0 and
EntryLo1.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
BadVAddr should not be updated if (env->hflags & MIPS_HFLAG_DM) is
set.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add testing Config1.WR bit into watch exception handling logic.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Add CP0 BadInstrX register. This register will be used in nanoMIPS.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Update CP0 registers Config0, Config1, Config2, Config3,
Config4, and Config5 bit definitions.
Some of these bits will be utilized by upcoming nanoMIPS changes.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fix two instances of shadow variables. This cleans up entire file
translate.c from shadow variables.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Mark switch fallthroughs with comments, in cases fallthroughs
are intentional.
The comments "/* fall through */" are interpreted by compilers and
other tools, and they will not issue warnings in such cases. For gcc,
the warning is turnend on by -Wimplicit-fallthrough. With this patch,
there will be no such warnings in target/mips directory. If such
warning appears in future, it should be checked if it is intentional,
and, if yes, marked with a comment similar to those from this patch.
The comment must be just before next "case", otherwise gcc won't
understand it.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Remove "range style" case statements to make code analysis easier.
This patch handles cases when the values in the range in question
were not properly defined.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <amarkovic@wavecomp.com>
Remove "range style" case statements to make code analysis easier.
This is needed also for some upcoming nanoMIPS-related refactorings.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Enabling TOPOEXT is always allowed, but it can't be enabled
blindly by "-cpu host" because it may make guests crash if the
rest of the cache topology information isn't provided or isn't
consistent.
This addresses the bug reported at:
https://bugzilla.redhat.com/show_bug.cgi?id=1613277
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180809221852.15285-1-ehabkost@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
New CPU models mostly inherit features from ancestor Skylake, while addin new
features: UMIP, New Instructions ( PCONIFIG (server only), WBNOINVD,
AVX512_VBMI2, GFNI, AVX512_VNNI, VPCLMULQDQ, VAES, AVX512_BITALG),
Intel PT and 5-level paging (Server only). As well as
IA32_PRED_CMD, SSBD support for speculative execution
side channel mitigations.
Note:
For 5-level paging, Guest physical address width can be configured, with
parameter "phys-bits". Unless explicitly specified, we still use its default
value, even for Icelake-Server cpu model.
At present, hold on expose IA32_ARCH_CAPABILITIES to guest, as 1) This MSR
actually presents more than 1 'feature', maintainers are considering expanding current
features presentation of only CPUIDs to MSR bits; 2) a reasonable default value
for MSR_IA32_ARCH_CAPABILITIES needs to settled first. These 2 are actully
beyond Icelake CPU model itself but fundamental. So split these work apart
and do it later.
https://lists.gnu.org/archive/html/qemu-devel/2018-07/msg00774.htmlhttps://lists.gnu.org/archive/html/qemu-devel/2018-07/msg00796.html
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <1530781798-183214-6-git-send-email-robert.hu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
WBNOINVD: Write back and do not invalidate cache, enumerated by
CPUID.(EAX=80000008H, ECX=0):EBX[bit 9].
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <1530781798-183214-5-git-send-email-robert.hu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Support of IA32_PRED_CMD MSR already be enumerated by same CPUID bit as
SPEC_CTRL.
At present, mark CPUID_7_0_EDX_ARCH_CAPABILITIES unmigratable, per Paolo's
comment.
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <1530781798-183214-3-git-send-email-robert.hu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
IA32_PRED_CMD MSR gives software a way to issue commands that affect the state
of indirect branch predictors. Enumerated by CPUID.(EAX=7H,ECX=0):EDX[26].
IA32_ARCH_CAPABILITIES MSR enumerates architectural features of RDCL_NO and
IBRS_ALL. Enumerated by CPUID.(EAX=07H, ECX=0):EDX[29].
https://software.intel.com/sites/default/files/managed/c5/63/336996-Speculative-Execution-Side-Channel-Mitigations.pdf
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <1530781798-183214-2-git-send-email-robert.hu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
These insns require u=1; failed to include that in the switch
cases. This probably happened during one of the rebases just
before final commit.
Fixes: d17b7cdcf4
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180810193129.1556-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We were using the wrong flush-to-zero bit for the non-half input.
Fixes: 46d33d1e3c
Cc: qemu-stable@nongnu.org (3.0.1)
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180810193129.1556-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When FZ is set, input_denormal exceptions are recognized, but this does
not happen with FZ16. The softfloat code has no way to distinguish
these bits and will raise such exceptions into fp_status_f16.flags,
so ignore them when computing the accumulated flags.
Cc: qemu-stable@nongnu.org (3.0.1)
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180810193129.1556-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When support for FZ16 was added, we failed to include the bit
within FPCR_MASK, which means that it could never be set.
Continue to zero FZ16 when ARMv8.2-FP16 is not enabled.
Fixes: d81ce0ef2c
Cc: qemu-stable@nongnu.org (3.0.1)
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180810193129.1556-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Define a "cortex-m0" ARMv6-M CPU model.
Most of the register reset values set by other CPU models are not
relevant for the cut-down ARMv6-M architecture.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180814162739.11814-3-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Stefan Markovic
Matthew Fortune
Yongbok Kim
Philippe Mathieu-Daudé
Aleksandar Markovic
Peter Maydell
Michael Clark
Helge Deller
Aaron Lindsay
Edgar E. Iglesias
Thomas Huth
Richard Henderson
Tony Krowiak
David Hildenbrand
Dongjiu Geng
Pavel Zbitskiy
Janosch Frank
Pavel Dovgalyuk
Paolo Bonzini
Liran Alon
Emilio G. Cota
Jan Kiszka
Max Filippov
Igor Mammedov
Nikunj A Dadhania
Dimitrije Nikolic
Aleksandar Rikalo
James Hogan
Andrew Oates
Eduardo Habkost
Roman Kapl
Yasmin Beatriz
Christian Borntraeger
Cornelia Huck
Michael Mueller
Laurent Vivier
Wanpeng Li
Robert Hoo
Stefan Hajnoczi