We got a report from the linux-arm-kernel folks about getting spurious
warnings when building the kernel with binutils 2.29. See
https://www.spinics.net/lists/arm-kernel/msg599929.html
which boils down to this testcase.
$> cat /tmp/tst.s
lr .req x30
/tmp/tst.s: Assembler messages:
/tmp/tst.s:1: Warning: ignoring attempt to redefine built-in register 'lr'
Instead let's treat this as a proper alias at startup time thus
avoiding the problem and treating these as proper aliases
rather than new registers. This means that attempts to redefine
the alias with the same "name" will provoke no warning and attempts
to redefine the alias to something else will provoke the above mentioned
warning.
Tested make check-gas and no regressions.
Ok to apply to trunk (and backport to 2.29 branch)?
Regards
Ramana
With IBM z14 officially announced I can add z14 as CPU name.
No regressions with that patch on s390x.
gas/ChangeLog:
2017-07-21 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* config/tc-s390.c (s390_parse_cpu): Add z14 as alternate CPU
name.
* doc/as.texinfo: Add z14 to CPU string list.
* doc/c-s390.texi: Likewise.
opcodes/ChangeLog:
2017-07-21 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-mkopc.c (main): Enable z14 as CPU string in the opcode
table.
This patch adds support for the ARM Cortex-A55 and
Cortex-A75 processors.
The ARM Cortex-A55 and Cortex-A75 procsessors implement the ARMv8-A
architecture, with support for the ARMv8.1-A and ARMv8.2-A extensions,
including support for the 16-bit floating point extensions.
The 16-bit floating-point extensions are optional, and we haven't defined
an option mapping straight to them thus far, so this patch first needs to
add one of those in include/opcode/arm.h, then we can simply add the CPU names
as usual in config/tc-arm.c .
Tested on arm-none-eabi.
2017-07-05 James Greenhalgh <james.greenhalgh@arm.com>
* config/tc-arm.c (arm_cpus): Add Cortex-A55 and Cortex-A75.
* doc/c-arm.texi (-mcpu): Document Cortex-A55 and Cortex-A75.
PR gas/21683
include * opcode/avr.h (AVR_INSN): Add one for __gcc_isr.
gas * doc/c-avr.texi (AVR Options) <-mgcc-isr>: Document it.
(AVR Pseudo Instructions): New node.
* config/tc-avr.h (md_pre_output_hook): Define to avr_pre_output_hook.
(md_undefined_symbol): Define to avr_undefined_symbol.
(avr_pre_output_hook, avr_undefined_symbol): New protos.
* config/tc-avr.c (struc-symbol.h): Include it.
(ISR_CHUNK_Done, ISR_CHUNK_Prologue, ISR_CHUNK_Epilogue): New enums.
(avr_isr, avr_gccisr_opcode)
(avr_no_sreg_hash, avr_no_sreg): New static variables.
(avr_opt_s) <have_gccisr>: Add field.
(avr_opt): Add initializer for have_gccisr.
(enum options) <OPTION_HAVE_GCCISR>: Add enum.
(md_longopts) <"mgcc-isr">: Add entry.
(md_show_usage): Document -mgcc-isr.
(md_parse_option) [OPTION_HAVE_GCCISR]: Handle it.
(md_undefined_symbol): Remove.
(avr_undefined_symbol, avr_pre_output_hook): New fuctions.
(md_begin) <avr_no_sreg_hash, avr_gccisr_opcode>: Initialize them.
(avr_operand) <pregno>: Add argument and set *pregno if function
is called for a register constraint.
[N]: Handle constraint.
(avr_operands) <avr_operand>: Pass 5th parameter to calls.
[avr_opt.have_gccisr]: Call avr_update_gccisr. Call
avr_gccisr_operands instead of avr_operands.
(avr_update_gccisr, avr_emit_insn, avr_patch_gccisr_frag)
(avr_gccisr_operands, avr_check_gccisr_done): New static functions.
* testsuite/gas/avr/gccisr-01.d: New test.
* testsuite/gas/avr/gccisr-01.s: New test.
* testsuite/gas/avr/gccisr-02.d: New test.
* testsuite/gas/avr/gccisr-02.s: New test.
* testsuite/gas/avr/gccisr-03.d: New test.
* testsuite/gas/avr/gccisr-03.s: New test.
This patch add assembler and disassembler support for new Dot Product
Extension.
The support can be enabled through the new "+dotprod" extension.
include/
* opcode/arm.h (FPU_NEON_EXT_DOTPROD): New macro.
(FPU_ARCH_DOTPROD_NEON_VFP_ARMV8): New macro.
gas/
* config/tc-arm.c (fpu_neon_ext_dotprod): New variable.
(neon_scalar_for_mul): Improve comments.
(do_neon_dotproduct): New function to encode Dot Product instructions.
(do_neon_dotproduct_s): Wrapper function for signed Dot Product
instructions.
(do_neon_dotproduct_u): Wrapper function for unsigned Dot Product
instructions.
(insns): New entries for vsdot and vudot.
(arm_extensions): New entry for "dotprod".
* doc/c-arm.texi: Document new "dotprod" extension.
* testsuite/gas/arm/dotprod.s: New test source.
* testsuite/gas/arm/dotprod-illegal.s: New test source.
* testsuite/gas/arm/dotprod.d: New test.
* testsuite/gas/arm/dotprod-thumb2.d: New test.
* testsuite/gas/arm/dotprod-illegal.d: New test.
* testsuite/gas/arm/dotprod-legacy-arch.d: New test.
* testsuite/gas/arm/dotprod-illegal.l: New error file.
* testsuite/gas/arm/dotprod-legacy-arch.l: New error file.
opcodes/
* arm-dis.c (coprocessor_opcodes): New entries for vsdot and vudot.
Add support for the Imagination interAptiv MR2 MIPS32r3 processor with
the MIPS16e2 ASE as per documentation, including in particular:
1. Support for implementation-specific interAptiv MR2 COPYW and UCOPYW
MIPS16e2 instructions[1], for assembly and disassembly,
2. Support for implementation-specific interAptiv MR2 SAVE and RESTORE
regular MIPS instructions[2], for assembly and disassembly,
3. ELF binary file annotation for the interAptiv MR2 MIPS architecture
extension.
4. Support for interAptiv MR2 architecture selection for assembly, in
the form of the `-march=interaptiv-mr2' command-line option and its
corresponding `arch=interaptiv-mr2' setting for the `.set' and
`.module' pseudo-ops.
5. Support for interAptiv MR2 architecture selection for disassembly,
in the form of the `mips:interaptiv-mr2' target architecture, for
use e.g. with the `-m' command-line option for `objdump'.
Parts of this change by Matthew Fortune and Andrew Bennett.
References:
[1] "MIPS32 interAptiv Multiprocessing System Software User's Manual",
Imagination Technologies Ltd., Document Number: MD00904, Revision
02.01, June 15, 2016, Section 24.3 "MIPS16e2 Implementation Specific
Instructions", pp. 878-883
[2] same, Chapter 25 "Implementation-specific Instructions", pp. 911-917
include/
* elf/mips.h (E_MIPS_MACH_IAMR2): New macro.
(AFL_EXT_INTERAPTIV_MR2): Likewise.
* opcode/mips.h: Document new operand codes defined.
(INSN_INTERAPTIV_MR2): New macro.
(INSN_CHIP_MASK): Adjust accordingly.
(CPU_INTERAPTIV_MR2): New macro.
(cpu_is_member) <CPU_INTERAPTIV_MR2>: New case.
(MIPS16_ALL_ARGS): Rename to...
(MIPS_SVRS_ALL_ARGS): ... this.
(MIPS16_ALL_STATICS): Rename to...
(MIPS_SVRS_ALL_STATICS): ... this.
bfd/
* archures.c (bfd_mach_mips_interaptiv_mr2): New macro.
* cpu-mips.c (I_interaptiv_mr2): New enum value.
(arch_info_struct): Add "mips:interaptiv-mr2" entry.
* elfxx-mips.c (_bfd_elf_mips_mach) <E_MIPS_MACH_IAMR2>: New
case.
(mips_set_isa_flags) <bfd_mach_mips_interaptiv_mr2>: Likewise.
(bfd_mips_isa_ext) <bfd_mach_mips_interaptiv_mr2>: Likewise.
(print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise.
(mips_mach_extensions): Add `bfd_mach_mipsisa32r3' and
`bfd_mach_mips_interaptiv_mr2' entries.
* bfd-in2.h: Regenerate.
opcodes/
* mips-formats.h (INT_BIAS): New macro.
(INT_ADJ): Redefine in INT_BIAS terms.
* mips-dis.c (mips_arch_choices): Add "interaptiv-mr2" entry.
(mips_print_save_restore): New function.
(print_insn_arg) <OP_SAVE_RESTORE_LIST>: Update comment.
(validate_insn_args) <OP_SAVE_RESTORE_LIST>: Remove `abort'
call.
(print_insn_args): Handle OP_SAVE_RESTORE_LIST.
(print_mips16_insn_arg): Call `mips_print_save_restore' for
OP_SAVE_RESTORE_LIST handling, factored out from here.
* mips-opc.c (decode_mips_operand) <'-'> <'m'>: New case.
(RD_31, RD_SP, WR_SP, MOD_SP, IAMR2): New macros.
(mips_builtin_opcodes): Add "restore" and "save" entries.
* mips16-opc.c (decode_mips16_operand) <'n', 'o'>: New cases.
(IAMR2): New macro.
(mips16_opcodes): Add "copyw" and "ucopyw" entries.
binutils/
* readelf.c (get_machine_flags) <E_MIPS_MACH_IAMR2>: New case.
(print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise.
* NEWS: Mention Imagination interAptiv MR2 processor support.
gas/
* config/tc-mips.c (validate_mips_insn): Handle
OP_SAVE_RESTORE_LIST specially.
(mips_encode_save_restore, mips16_encode_save_restore): New
functions.
(match_save_restore_list_operand): Factor out SAVE/RESTORE
operand insertion into the instruction word or halfword to these
new functions.
(mips_cpu_info_table): Add "interaptiv-mr2" entry.
* doc/c-mips.texi (MIPS Options): Add `interaptiv-mr2' to the
`-march=' argument list.
=== Context ===
This patch is part of a patch series to add support for ARMv8-R
architecture. Its purpose is to add support for ARM Cortex-R52
processor.
=== Patch description ===
This patch adds support for Cortex-R52 as an ARMv8-R processor with CRC
extensions.
2017-06-26 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* NEWS: Mention support of ARM Cortex-R52 processor.
* config/tc-arm.c (arm_cpus): Add entry for ARM Cortex-R52 processor.
* doc/c-arm.texi: Mention support for -mcpu=cortex-r52.
=== Context ===
This patch is part of a patch series to add support for ARMv8-R
architecture. Its purpose is to add support for ARMv8-R in GAS:
instructions, build attributes and readelf.
=== Patch description ===
Although some differences exist for system registers, from GAS point of
view ARMv8-R supports the same instructions as ARMv8-A Aarch32 state
and a subset of its extensions. This patch therefore introduce a new
feature bit to distinguish the availability of the pan, ras and rdma
extensions between ARMv8-A and ARMv8-R and allow crypto, fp and simd
extensions to be used by ARMv8-R.
Most of the changes are then in the testsuite to (i) rename source files
and error output to be shared between ARMv8-A and ARMv8-R, (ii) rename
files with expected output for ARMv8-A build attributes and (iii) add
new files with expected output for ARMv8-R build attributes.
2017-06-24 Thomas Preud'homme <thomas.preudhomme@arm.com>
binutils/
* readelf.c (arm_attr_tag_CPU_arch): Fill value for ARMv8-R.
gas/
* NEWS: Mention support for ARMv8-R architecture.
* config/tc-arm.c (arm_archs): Add entry for ARMv8-R.
(arm_extensions): Restrict pan, ras and rdma extension to
ARMv8-A and make crypto, fp and simd extensions available to
ARMv8-R.
(cpu_arch_ver): Add entry for ARMv8-R.
(aeabi_set_public_attributes): Update gas_assert for Tag_DIV_use
logic.
* testsuite/gas/arm/armv8-a+fp.s: Rename into ...
* testsuite/gas/arm/armv8-ar+fp.s: This. Remove .arch directive.
* testsuite/gas/arm/armv8-a+fp.d: Specify source to assemble and
architecture to assemble for.
* testsuite/gas/arm/armv8-r+fp.d: New.
* testsuite/gas/arm/armv8-a+simd.s: Rename into ...
* testsuite/gas/arm/armv8-ar+simd.s: This. Remove .arch directive.
* testsuite/gas/arm/armv8-a+simd.d: Specify source to assemble and
architecture to assemble for.
* testsuite/gas/arm/armv8-r+simd.d: New.
* testsuite/gas/arm/armv8-a-bad.s: Rename into ...
* testsuite/gas/arm/armv8-ar-bad.s: This. Remove .arch directive.
* testsuite/gas/arm/armv8-a-bad.l: Rename into ...
* testsuite/gas/arm/armv8-ar-bad.l: This. Decrement line number by 1.
* testsuite/gas/arm/armv8-a-bad.d: Specify source to assemble,
architecture to assemble for and adjust error output file.
* testsuite/gas/arm/armv8-r-bad.d: New.
* testsuite/gas/arm/armv8-a-barrier.s: Rename into ...
* testsuite/gas/arm/armv8-ar-barrier.s: This.
* testsuite/gas/arm/armv8-a-barrier-arm.d: Adjust source.
* testsuite/gas/arm/armv8-a-barrier-thumb.d: Likewise.
* testsuite/gas/arm/armv8-r-barrier-arm.d: New.
* testsuite/gas/arm/armv8-r-barrier-thumb.d: New.
* testsuite/gas/arm/armv8-a-it-bad.s: Rename into ...
* testsuite/gas/arm/armv8-ar-it-bad.s: This. Remove .arch directive.
* testsuite/gas/arm/armv8-a-it-bad.l: Rename into ...
* testsuite/gas/arm/armv8-ar-it-bad.l: This. Decrement line number
by 1.
* testsuite/gas/arm/armv8-a-it-bad.d: Specify source to assemble,
architecture to assemble for and adjust error output file.
* testsuite/gas/arm/armv8-r-it-bad.d: New.
* testsuite/gas/arm/armv8-a.s: Rename into ...
* testsuite/gas/arm/armv8-ar.s: This. Remove .arch directive.
* testsuite/gas/arm/armv8-a.d: Specify source to assemble and
architecture to assemble for.
* testsuite/gas/arm/armv8-r.d: New.
* testsuite/gas/arm/attr-march-armv8-r+crypto.d: New.
* testsuite/gas/arm/attr-march-armv8-r+fp.d: New.
* testsuite/gas/arm/attr-march-armv8-r+simd.d: New.
* testsuite/gas/arm/attr-march-armv8-r.d: New.
* testsuite/gas/arm/crc32.s: Rename into ...
* testsuite/gas/arm/crc32-armv8-ar.s: This.
* testsuite/gas/arm/crc32.d: Rename into ...
* testsuite/gas/arm/crc32-armv8-a.d: This. Specify source to assemble.
* testsuite/gas/arm/crc32-armv8-r.d: New.
* testsuite/gas/arm/crc32-bad.s: Rename into ...
* testsuite/gas/arm/crc32-armv8-ar-bad.s: This.
* testsuite/gas/arm/crc32-bad.d: Rename into ...
* testsuite/gas/arm/crc32-armv8-a-bad.d: This. Specify source to
assemble.
* testsuite/gas/arm/crc32-armv8-r-bad.d: New.
* testsuite/gas/arm/mask_1.s: Rename into ...
* testsuite/gas/arm/mask_1-armv8-ar.s: This.
* testsuite/gas/arm/mask_1.d: Rename into ...
* testsuite/gas/arm/mask_1-armv8-a.d: This. Specify source to
assemble.
* testsuite/gas/arm/mask_1-armv8-r.d: new.
include/
* elf/arm.h (TAG_CPU_ARCH_V8R): New macro.
* opcode/arm.h (ARM_EXT2_V8A): New macro.
(ARM_AEXT2_V8A): Rename into ...
(ARM_AEXT2_V8AR): This.
(ARM_AEXT2_V8A): New macro.
(ARM_AEXT_V8R): New macro.
(ARM_AEXT2_V8R): New macro.
(ARM_ARCH_V8R): New macro.
Add MIPS16e2 ASE support as per the architecture specification[1],
including in particular:
1. A new ELF ASE flag to mark MIPS16e2 binaries.
2. MIPS16e2 instruction assembly support, including a relaxation update
to use LUI rather than an LI/SLL instruction pair for loading the
high part of 32-bit addresses.
3. MIPS16e2 instruction disassembly support, including updated rules for
extended forms of instructions that are now subdecoded and therefore
do not alias to the original MIPS16 ISA revision instructions even
for encodings that are not valid in the MIPS16e2 instruction set.
Add `-mmips16e2' and `-mno-mips16e2' GAS command-line options and their
corresponding `mips16e2' and `no-mips16e2' settings for the `.set' and
`.module' pseudo-ops. Control the availability of the MT ASE subset of
the MIPS16e2 instruction set with a combination of these controls and
the preexisting MT ASE controls.
Parts of this change by Matthew Fortune and Andrew Bennett.
References:
[1] "MIPS32 Architecture for Programmers: MIPS16e2 Application-Specific
Extension Technical Reference Manual", Imagination Technologies
Ltd., Document Number: MD01172, Revision 01.00, April 26, 2016
include/
* elf/mips.h (AFL_ASE_MIPS16E2): New macro.
(AFL_ASE_MASK): Adjust accordingly.
* opcode/mips.h: Document new operand codes defined.
(mips_operand_type): Add OP_REG28 enum value.
(INSN2_SHORT_ONLY): Update description.
(ASE_MIPS16E2, ASE_MIPS16E2_MT): New macros.
bfd/
* elfxx-mips.c (print_mips_ases): Handle MIPS16e2 ASE.
opcodes/
* mips-dis.c (mips_arch_choices): Add ASE_MIPS16E2 and
ASE_MIPS16E2_MT flags to the unnamed MIPS16 entry.
(mips_convert_abiflags_ases): Handle the AFL_ASE_MIPS16E2 flag.
(print_insn_arg) <OP_REG28>: Add handler.
(validate_insn_args) <OP_REG28>: Handle.
(print_mips16_insn_arg): Handle MIPS16 instructions that require
32-bit encoding and 9-bit immediates.
(print_insn_mips16): Handle MIPS16 instructions that require
32-bit encoding and MFC0/MTC0 operand decoding.
* mips16-opc.c (decode_mips16_operand) <'>', '9', 'G', 'N', 'O'>
<'Q', 'T', 'b', 'c', 'd', 'r', 'u'>: Add handlers.
(RD_C0, WR_C0, E2, E2MT): New macros.
(mips16_opcodes): Add entries for MIPS16e2 instructions:
GP-relative "addiu" and its "addu" spelling, "andi", "cache",
"di", "ehb", "ei", "ext", "ins", GP-relative "lb", "lbu", "lh",
"lhu", and "lw" instructions, "ll", "lui", "lwl", "lwr", "mfc0",
"movn", "movtn", "movtz", "movz", "mtc0", "ori", "pause",
"pref", "rdhwr", "sc", GP-relative "sb", "sh" and "sw"
instructions, "swl", "swr", "sync" and its "sync_acquire",
"sync_mb", "sync_release", "sync_rmb" and "sync_wmb" aliases,
"xori", "dmt", "dvpe", "emt" and "evpe". Add split
regular/extended entries for original MIPS16 ISA revision
instructions whose extended forms are subdecoded in the MIPS16e2
ISA revision: "li", "sll" and "srl".
binutils/
* readelf.c (print_mips_ases): Handle MIPS16e2 ASE.
* NEWS: Mention MIPS16e2 ASE support.
gas/
* config/tc-mips.c (RELAX_MIPS16_ENCODE): Add `e2' flag.
(RELAX_MIPS16_E2): New macro.
(RELAX_MIPS16_PIC, RELAX_MIPS16_SYM32, RELAX_MIPS16_NOMACRO)
(RELAX_MIPS16_USER_SMALL, RELAX_MIPS16_USER_EXT)
(RELAX_MIPS16_DSLOT, RELAX_MIPS16_JAL_DSLOT)
(RELAX_MIPS16_EXTENDED, RELAX_MIPS16_MARK_EXTENDED)
(RELAX_MIPS16_CLEAR_EXTENDED, RELAX_MIPS16_ALWAYS_EXTENDED)
(RELAX_MIPS16_MARK_ALWAYS_EXTENDED)
(RELAX_MIPS16_CLEAR_ALWAYS_EXTENDED, RELAX_MIPS16_MACRO)
(RELAX_MIPS16_MARK_MACRO, RELAX_MIPS16_CLEAR_MACRO): Shift bits.
(mips16_immed_extend): New prototype.
(options): Add OPTION_MIPS16E2 and OPTION_NO_MIPS16E2 enum
values.
(md_longopts): Add "mmips16e2" and "mno-mips16e2" options.
(mips_ases): Add "mips16e2" entry.
(mips_set_ase): Handle MIPS16e2 ASE.
(insn_insert_operand): Explicitly handle immediates with MIPS16
instructions that require 32-bit encoding.
(is_opcode_valid_16): Pass enabled ASE bitmask on to
`opcode_is_member'.
(validate_mips_insn): Explicitly handle immediates with MIPS16
instructions that require 32-bit encoding.
(operand_reg_mask) <OP_REG28>: Add handler.
(match_reg28_operand): New function.
(match_operand) <OP_REG28>: Add handler.
(append_insn): Pass ASE_MIPS16E2 setting to RELAX_MIPS16_ENCODE.
(match_mips16_insn): Handle MIPS16 instructions that require
32-bit encoding and `V' and `u' operand codes.
(mips16_ip): Allow any characters except from `.' in opcodes.
(mips16_immed_extend): Handle 9-bit immediates. Do not shuffle
immediates whose width is not one of these listed.
(md_estimate_size_before_relax): Handle MIPS16e2 relaxation.
(mips_relax_frag): Likewise.
(md_convert_frag): Likewise.
(mips_convert_ase_flags): Handle MIPS16e2 ASE.
* doc/as.texinfo (Target MIPS options): Add `-mmips16e2' and
`-mno-mips16e2' options.
(-mmips16e2, -mno-mips16e2): New options.
* doc/c-mips.texi (MIPS Options): Add `-mmips16e2' and
`-mno-mips16e2' options.
(MIPS ASE Instruction Generation Overrides): Add `.set mips16e2'
and `.set nomips16e2'.
Complement commit 919731affb ("Add MIPS .module directive") and update
the GAS manual to refer to the `.module' rather than `.set' directive in
command-line option descriptions, following an observation that unlike
`.set' and like the respective command-line option the use of the
`.module' directive affects the ISA and ASE flags recorded in the object
file produced, and therefore it is `.module' rather than `.set' that
corresponds to the respective command-line option.
gas/
* doc/as.texinfo (-mips16, -no-mips16): Refer to `.module
mips16' rather than `.set mips16'.
(-mmicromips, -mno-micromips): Refer to `.module micromips' and
`.module nomicromips' rather than `.set micromips' and `.set
nomicromips'.
(-msmartmips, -mno-smartmips): Refer to `.module smartmips'
rather than `.set smartmips'.
* doc/c-mips.texi (MIPS Options): Refer to `.module mips16',
`.module micromips', `.module nomicromips' and `.module
smartmips' rather than `.set mips16', `.set micromips', `.set
nomicromips' and `.set smartmips' respectively.
Mark an ALLOC section, which should be placed in special memory area,
with SHF_GNU_MBIND. Its sh_info field indicates the special memory
type. GNU_MBIND section names start with ".mbind" so that they are
placed as orphan sections by linker. All input GNU_MBIND sections
with the same sh_type, sh_flags and sh_info are placed in one output
GNU_MBIND section. In executable and shared object, create a
GNU_MBIND segment for each GNU_MBIND section and its segment type is
PT_GNU_MBIND_LO plus the sh_info value. Each GNU_MBIND segment is
aligned at page boundary.
The assembler syntax:
.section .mbind.foo,"adx",%progbits
^ 0: Special memory type.
|
'd' for SHF_GNU_MBIND.
.section .mbind.foo,"adx",%progbits,0x1
^ 1: Special memory type.
|
'd' for SHF_GNU_MBIND.
.section .mbind.bar,"adG",%progbits,.foo_group,comdat,0x2
^ 2: Special memory type.
|
'd' for SHF_GNU_MBIND.
bfd/
* elf.c (get_program_header_size): Add a GNU_MBIND segment for
each GNU_MBIND section and align GNU_MBIND section to page size.
(_bfd_elf_map_sections_to_segments): Create a GNU_MBIND
segment for each GNU_MBIND section.
(_bfd_elf_init_private_section_data): Copy sh_info from input
for GNU_MBIND section.
binutils/
* NEWS: Mention support for ELF SHF_GNU_MBIND and
PT_GNU_MBIND_XXX.
* readelf.c (get_segment_type): Handle PT_GNU_MBIND_XXX.
(get_elf_section_flags): Handle SHF_GNU_MBIND.
(process_section_headers): Likewise.
* testsuite/binutils-all/mbind1.s: New file.
* testsuite/binutils-all/objcopy.exp: Run readelf test on
mbind1.s.
gas/
* NEWS: Mention support for ELF SHF_GNU_MBIND.
* config/obj-elf.c (section_match): New.
(get_section): Match both sh_info and group name.
(obj_elf_change_section): Add argument for sh_info. Pass both
sh_info and group name to get_section. Issue an error for
SHF_GNU_MBIND section without SHF_ALLOC. Set sh_info.
(obj_elf_parse_section_letters): Set SHF_GNU_MBIND for 'd'.
(obj_elf_section): Support SHF_GNU_MBIND section info.
* config/obj-elf.h (obj_elf_change_section): Add argument for
sh_info.
* config/tc-arm.c (start_unwind_section): Pass 0 as sh_info to
obj_elf_change_section.
* config/tc-ia64.c (obj_elf_vms_common): Likewise.
* config/tc-microblaze.c (microblaze_s_data): Likewise.
(microblaze_s_sdata): Likewise.
(microblaze_s_rdata): Likewise.
(microblaze_s_bss): Likewise.
* config/tc-mips.c (s_change_section): Likewise.
* config/tc-msp430.c (msp430_profiler): Likewise.
* config/tc-rx.c (parse_rx_section): Likewise.
* config/tc-tic6x.c (tic6x_start_unwind_section): Likewise.
* doc/as.texinfo: Document 'd' for SHF_GNU_MBIND.
* testsuite/gas/elf/elf.exp: Run section12a, section12b and
section13.
* testsuite/gas/elf/section10.d: Updated.
* testsuite/gas/elf/section10.s: Likewise.
* testsuite/gas/elf/section12.s: New file.
* testsuite/gas/elf/section12a.d: Likewise.
* testsuite/gas/elf/section12b.d: Likewise.
* testsuite/gas/elf/section13.l: Likewise.
* testsuite/gas/elf/section13.d: Likewise.
* testsuite/gas/elf/section13.s: Likewise.
include/
* elf/common.h (PT_GNU_MBIND_NUM): New.
(PT_GNU_MBIND_LO): Likewise.
(PT_GNU_MBIND_HI): Likewise.
(SHF_GNU_MBIND): Likewise.
ld/
* NEWS: Mention support for ELF SHF_GNU_MBIND and
PT_GNU_MBIND_XXX.
* emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Place
input GNU_MBIND sections with the same type, attributes and
sh_info field into a single output GNU_MBIND section.
* testsuite/ld-elf/elf.exp: Run mbind2a and mbind2b.
* testsuite/ld-elf/mbind1.s: New file.
* testsuite/ld-elf/mbind1a.d: Likewise.
* testsuite/ld-elf/mbind1b.d: Likewise.
* testsuite/ld-elf/mbind1c.d: Likewise.
* testsuite/ld-elf/mbind2a.s: Likewise.
* testsuite/ld-elf/mbind2b.c: Likewise.
It looks like I missed the GAS help text when going through all the
documentation last time, so it printed some of the old-format (never
upstream) arguments. I fixed this, and when I went to check doc/ I
noticed it was missing the '-fpic'/'-fno-pic' options.
* doc/as.texinfo (2byte): Note that if no expressions are present
the directive does nothing. Emphasize that the output is
unaligned, and that this can have an effect on the relocations
generated.
(4byte): Simplify description. Refer back to the 2byte
description.
(8byte): Likewise.
Nick pointed out that I hadn't documented the new -mfpu option
neon-vfpv3 and mentioned that some others were missing.
Having looked through the list only one (neon-fp16) really should be
documented; the other two entries in the real table should not be
documented as they are aliases kept for legacy compatibility reasons.
This patch adds the missing entries and notes in the main table that
the other two entries should not be documented.
I've also fixed a small spelling error in the accompanying text.
* config/tc-arm.c (arm_fpus): Note entires that should not be
documented.
* doc/c-arm.texi (-mfpu): Add missing FPU entries for neon-vfpv3 and
neon-fp16. Fix spelling error.
Many x86 instructions have more than one encodings. Assembler picks
the default one, usually the shortest one. Although the ".s", ".d8"
and ".d32" suffixes can be used to swap register operands or specify
displacement size, they aren't very flexible. This patch adds pseudo
prefixes, {xxx}, to control instruction encoding. The available
pseudo prefixes are {disp8}, {disp32}, {load}, {store}, {vex2}, {vex3}
and {evex}. Pseudo prefixes are preferred over the ".s", ".d8" and
".d32" suffixes, which are deprecated.
gas/
* config/tc-i386.c (_i386_insn): Add dir_encoding and
vec_encoding. Remove swap_operand and need_vrex.
(extra_symbol_chars): Add '}'.
(md_begin): Mark '}' with LEX_BEGIN_NAME. Allow '}' in
mnemonic.
(build_vex_prefix): Don't use 2-byte VEX encoding with
{vex3}. Check dir_encoding and load.
(parse_insn): Check pseudo prefixes. Set dir_encoding.
(VEX_check_operands): Likewise.
(match_template): Check dir_encoding and load.
(parse_real_register): Set vec_encoding instead of need_vrex.
(parse_register): Likewise.
* doc/c-i386.texi: Document {disp8}, {disp32}, {load}, {store},
{vex2}, {vex3} and {evex}. Remove ".s", ".d8" and ".d32"
* testsuite/gas/i386/i386.exp: Run pseudos and x86-64-pseudos.
* testsuite/gas/i386/pseudos.d: New file.
* testsuite/gas/i386/pseudos.s: Likewise.
* testsuite/gas/i386/x86-64-pseudos.d: Likewise.
* testsuite/gas/i386/x86-64-pseudos.s: Likewise.
opcodes/
* i386-gen.c (opcode_modifiers): Replace S with Load.
* i386-opc.h (S): Removed.
(Load): New.
(i386_opcode_modifier): Replace s with load.
* i386-opc.tbl: Add {disp8}, {disp32}, {swap}, {vex2}, {vex3}
and {evex}. Replace S with Load.
* i386-tbl.h: Regenerated.
This patch supports some additions to the SVE architecture prior to
its public release.
include/
* opcode/aarch64.h (AARCH64_OPND_SVE_ADDR_RI_S4x16)
(AARCH64_OPND_SVE_IMM_ROT1, AARCH64_OPND_SVE_IMM_ROT2)
(AARCH64_OPND_SVE_Zm3_INDEX, AARCH64_OPND_SVE_Zm3_22_INDEX)
(AARCH64_OPND_SVE_Zm4_INDEX): New aarch64_opnds.
opcodes/
* aarch64-tbl.h (OP_SVE_HMH, OP_SVE_VMU_HSD, OP_SVE_VMVU_HSD)
(OP_SVE_VMVV_HSD, OP_SVE_VMVVU_HSD, OP_SVE_VM_HSD, OP_SVE_VUVV_HSD)
(OP_SVE_VUV_HSD, OP_SVE_VU_HSD, OP_SVE_VVVU_H, OP_SVE_VVVU_S)
(OP_SVE_VVVU_HSD, OP_SVE_VVV_D, OP_SVE_VVV_D_H, OP_SVE_VVV_H)
(OP_SVE_VVV_HSD, OP_SVE_VVV_S, OP_SVE_VVV_S_B, OP_SVE_VVV_SD_BH)
(OP_SVE_VV_BHSDQ, OP_SVE_VV_HSD, OP_SVE_VZVV_HSD, OP_SVE_VZV_HSD)
(OP_SVE_V_HSD): New macros.
(OP_SVE_VMU_SD, OP_SVE_VMVU_SD, OP_SVE_VM_SD, OP_SVE_VUVV_SD)
(OP_SVE_VU_SD, OP_SVE_VVVU_SD, OP_SVE_VVV_SD, OP_SVE_VZVV_SD)
(OP_SVE_VZV_SD, OP_SVE_V_SD): Delete.
(aarch64_opcode_table): Add new SVE instructions.
(aarch64_opcode_table): Use imm_rotate{1,2} instead of imm_rotate
for rotation operands. Add new SVE operands.
* aarch64-asm.h (ins_sve_addr_ri_s4): New inserter.
(ins_sve_quad_index): Likewise.
(ins_imm_rotate): Split into...
(ins_imm_rotate1, ins_imm_rotate2): ...these two inserters.
* aarch64-asm.c (aarch64_ins_imm_rotate): Split into...
(aarch64_ins_imm_rotate1, aarch64_ins_imm_rotate2): ...these two
functions.
(aarch64_ins_sve_addr_ri_s4): New function.
(aarch64_ins_sve_quad_index): Likewise.
(do_misc_encoding): Handle "MOV Zn.Q, Qm".
* aarch64-asm-2.c: Regenerate.
* aarch64-dis.h (ext_sve_addr_ri_s4): New extractor.
(ext_sve_quad_index): Likewise.
(ext_imm_rotate): Split into...
(ext_imm_rotate1, ext_imm_rotate2): ...these two extractors.
* aarch64-dis.c (aarch64_ext_imm_rotate): Split into...
(aarch64_ext_imm_rotate1, aarch64_ext_imm_rotate2): ...these two
functions.
(aarch64_ext_sve_addr_ri_s4): New function.
(aarch64_ext_sve_quad_index): Likewise.
(aarch64_ext_sve_index): Allow quad indices.
(do_misc_decoding): Likewise.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc.h (FLD_SVE_i3h, FLD_SVE_rot1, FLD_SVE_rot2): New
aarch64_field_kinds.
(OPD_F_OD_MASK): Widen by one bit.
(OPD_F_NO_ZR): Bump accordingly.
(get_operand_field_width): New function.
* aarch64-opc.c (fields): Add new SVE fields.
(operand_general_constraint_met_p): Handle new SVE operands.
(aarch64_print_operand): Likewise.
* aarch64-opc-2.c: Regenerate.
gas/
* doc/c-aarch64.texi: Document that sve implies fp16, simd and compnum.
* config/tc-aarch64.c (parse_vector_type_for_operand): Allow .q
to be used with SVE registers.
(parse_operands): Handle new SVE operands.
(aarch64_features): Make "sve" require F16 rather than FP. Also
require COMPNUM.
* testsuite/gas/aarch64/sve.s: Add tests for new instructions.
Include compnum tests.
* testsuite/gas/aarch64/sve.d: Update accordingly.
* testsuite/gas/aarch64/sve-invalid.s: Add tests for new instructions.
* testsuite/gas/aarch64/sve-invalid.l: Update accordingly. Also
update expected output for new FMOV and MOV alternatives.
This patch adds a named "compnum" feature for the ARMv8.3-A FCADD
and FCMLA extensions.
include/
* opcode/aarch64.h (AARCH64_FEATURE_COMPNUM): New macro.
(AARCH64_ARCH_V8_3): Include AARCH64_FEATURE_COMPNUM.
opcodes/
* aarch64-tbl.h (aarch64_feature_simd_v8_3): Replace with...
(aarch64_feature_compnum): ...this.
(SIMD_V8_3): Replace with...
(COMPNUM): ...this.
(CNUM_INSN): New macro.
(aarch64_opcode_table): Use it for the complex number instructions.
gas/
* doc/c-aarch64.texi: Add a "compnum" entry.
* config/tc-aarch64.c (aarch64_features): Likewise,
* testsuite/gas/aarch64/advsimd-compnum.s: New test.
* testsuite/gas/aarch64/advsimd-compnum.d: Likewise.
This adds support of new instructions to the S/390 specific parts.
The important feature of the new instruction set is the support of
single and extended precision floating point vector operations.
Note: arch12 is NOT the official name of the new CPU. It just
continues the series of archXX options supported as alternate names.
The archXX terminology refers to the edition number of the Principle
of Operations manual. The official CPU name will be added later while
keeping support of the arch12 for backwards compatibility.
No testsuite regressions.
Committed to mainline.
Bye,
-Andreas-
opcodes/ChangeLog:
2017-02-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-mkopc.c (main): Accept arch12 as cpu string and vx2 as
facility.
* s390-opc.c: Add new operand description macros, new instruction
types, instruction masks, and new .insn instruction types.
* s390-opc.txt: Add new arch12 instructions.
include/ChangeLog:
2017-02-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* opcode/s390.h (enum s390_opcode_cpu_val): New value
S390_OPCODE_ARCH12.
(S390_INSTR_FLAG_VX2): New macro definition.
gas/ChangeLog:
2017-02-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* config/tc-s390.c (s390_parse_cpu): New entry for arch12.
* doc/as.texinfo: Document arch12 as cpu type.
* doc/c-s390.texi: Likewise.
* testsuite/gas/s390/s390.exp: Run arch12 specific tests.
* testsuite/gas/s390/zarch-arch12.d: New test.
* testsuite/gas/s390/zarch-arch12.s: New test.
* testsuite/gas/s390/zarch-z13.d: Rename some mnemonics in the
output patterns.
The documentation entry for the SVE feature incorrectly said that
it was enabled by default for ARMv8-A or later. This patch fixes
that and also mentions that +sve implies +simd. (It also implies
+fp, but that follows by transitivity.)
gas/
* doc/c-aarch64.texi: Fix sve entry.
Include the detailed MIPS option description in the man page along with
other target descriptions and complementing the terse list earlier on.
gas/
* doc/as.texinfo (Overview): Select MIPS options for man page
inclusion.
Complement commit 9d862524f6 ("MIPS: Verify the ISA mode and alignment
of branch and jump targets") and add GAS and LD options to control the
checks for invalid branches between ISA modes introduced there, to help
with some handwritten code lacking `.insn' annotation for labels used as
branch targets and code produced by older versions of GCC which suffers
from the issue with branches to code that has been optimized away,
addressed with GCC commit 242424 ("MIPS/GCC: Mark trailing labels with
`.insn'"), <https://gcc.gnu.org/ml/gcc-patches/2016-11/msg01061.html>.
bfd/
* elfxx-mips.h (_bfd_mips_elf_insn32): Rename prototype to...
(_bfd_mips_elf_linker_flags): ... this. Add another parameter.
* elfxx-mips.c (mips_elf_link_hash_table): Add
`ignore_branch_isa' member.
(mips_elf_perform_relocation): Do not treat an ISA mode mismatch
in branch relocation calculation as an error if
`ignore_branch_isa' has been set.
(_bfd_mips_elf_insn32): Rename to...
(_bfd_mips_elf_linker_flags): ... this. Rename the `on'
parameter to `insn32' and add an `ignore_branch_isa' parameter.
Handle the new parameter.
gas/
* config/tc-mips.c (mips_ignore_branch_isa): New variable.
(options): Add OPTION_IGNORE_BRANCH_ISA and
OPTION_NO_IGNORE_BRANCH_ISA enum values.
(md_longopts): Add "mignore-branch-isa" and
"mno-ignore-branch-isa" options.
(md_parse_option): Handle OPTION_IGNORE_BRANCH_ISA and
OPTION_NO_IGNORE_BRANCH_ISA.
(fix_bad_cross_mode_branch_p): Return FALSE if
`mips_ignore_branch_isa' has been set.
(md_show_usage): Add `-mignore-branch-isa' and
`-mno-ignore-branch-isa'.
* doc/as.texinfo (Target MIPS options): Add
`-mignore-branch-isa' and `-mno-ignore-branch-isa' options.
(-mignore-branch-isa, -mno-ignore-branch-isa): New options.
* doc/c-mips.texi (MIPS Options): Add `-mignore-branch-isa' and
`-mno-ignore-branch-isa' options.
* testsuite/gas/mips/branch-local-ignore-2.d: New test.
* testsuite/gas/mips/branch-local-ignore-3.d: New test.
* testsuite/gas/mips/branch-local-ignore-n32-2.d: New test.
* testsuite/gas/mips/branch-local-ignore-n32-3.d: New test.
* testsuite/gas/mips/branch-local-ignore-n64-2.d: New test.
* testsuite/gas/mips/branch-local-ignore-n64-3.d: New test.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* emultempl/mipself.em (ignore_branch_isa): New variable.
(mips_create_output_section_statements): Rename
`_bfd_mips_elf_insn32' called to `_bfd_mips_elf_linker_flags',
add `ignore_branch_isa' argument.
(PARSE_AND_LIST_PROLOGUE): Add OPTION_IGNORE_BRANCH_ISA and
OPTION_NO_IGNORE_BRANCH_ISA enum values.
(PARSE_AND_LIST_LONGOPTS): Add "ignore-branch-isa" and
"no-ignore-branch-isa" options.
(PARSE_AND_LIST_OPTIONS): Add `--ignore-branch-isa' and
`--no-ignore-branch-isa'.
(PARSE_AND_LIST_ARGS_CASES): Handle OPTION_IGNORE_BRANCH_ISA and
OPTION_NO_IGNORE_BRANCH_ISA.
* ld.texinfo (Options specific to MIPS targets): Add
`--ignore-branch-isa' and `--no-ignore-branch-isa' options.
(ld and the MIPS family): Likewise.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-n32.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-n64.d: New test.
* testsuite/ld-mips-elf/unaligned-branch-ignore-2.d: New test.
* testsuite/ld-mips-elf/unaligned-branch-ignore-r6-1: New test.
* testsuite/ld-mips-elf/unaligned-branch-ignore-mips16: New
test.
* testsuite/ld-mips-elf/unaligned-branch-ignore-micromips: New
test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
gas/
* doc/c-lm32.texi: Fix chars with high bit set.
* testsuite/gas/bfin/vector2.s: Likewise.
gold/
* arm.cc: Fix comment chars with high bit set.
include/
* coff/pe.h: Fix comment chars with high bit set.
* opcode/xgate.h: Likewise.
ld/
* testsuite/ld-scripts/sysroot-prefix.exp: Fix chars with high bit set.
We've decided to standardize on two flags for RISC-V: "-march" sets the
target architecture (which determines which instructions can be
generated), and "-mabi" sets the target ABI. We needed to rework this
because the old flag set didn't support soft-float or single-float ABIs,
and didn't support an x32-style ABI on RISC-V.
Additionally, we've changed the behavior of the -march flag: it's now a
lot stricter and only parses things we can actually understand.
Additionally, it's now lowercase-only: the rationale is that while the
RISC-V ISA manual specifies that ISA strings are case-insensitive, in
Linux-land things are usually case-sensitive. Since this flag can be
used to determine library paths, we didn't want to bake some
case-insensitivity in there that would case trouble later.
This patch implements these two new flags and removes the old flags that
could conflict with these. There wasn't a RISC-V release before, so we
want to just support a clean flag set.
include/
* elf/riscv.h (EF_RISCV_SOFT_FLOAT): Don't define.
(EF_RISCV_FLOAT_ABI, EF_RISCV_FLOAT_ABI_SOFT): Define.
(EF_RISCV_FLOAT_ABI_SINGLE, EF_RISCV_FLOAT_ABI_DOUBLE): Define.
(EF_RISCV_FLOAT_ABI_QUAD): Define.
bfd/
* elfnn-riscv.c (_bfd_riscv_elf_merge_private_bfd_data): Use
EF_RISCV_FLOAT_ABI_SOFT instead of EF_RISCV_SOFT_FLOAT.
binutils/
* readelf.c (get_machine_flags): Use
EF_RISCV_FLOAT_ABI_{SOFT,SINGLE,DOBULE,QUAD) instead of
EF_RISCV_{SOFT,HARD}_FLOAT.
gas/
* config/tc-riscv.h (xlen): Delete.
* config/tc-riscv.c (xlen): Make static.
(abi_xlen): New variable.
(options): Replace OPTION_{M32,M64,MSOFT_FLOAT,MHARD_FLOAT,MRVC}
with OPTION_MABI.
(md_longopts): Likewise.
(md_parse_option): Likewise.
(riscv_elf_final_processing): Likewise.
* doc/as.texinfo (Target RISC-V options): Likewise.
* doc/c-riscv.texi (OPTIONS): Likewise.
* config/tc-riscv.c (float_mode): Removed.
(float_abi): New type, specifies the floating-point ABI.
(riscv_set_abi): New function.
(riscv_add_subset): Only allow lower-case ISA names and require
them to start with "rv".
(riscv_after_parse_args): Likewise.
opcodes/
* riscv-dis.c (riscv_disassemble_insn): Default to the ELF's
XLEN when none is provided.
ARMv8.3 is an architectural extension of ARMv8. Add the
feature macro and -march=armv8.3-a gas command line option
for the ARM target.
https://community.arm.com/groups/processors/blog/2016/10/27/armv8-a-architecture-2016-additions
gas/
* config/tc-arm.c (arm_archs): Add "armv8.3-a".
* doc/c-arm.texi (-march): Add "armv8.3-a".
include/
* opcode/arm.h (ARM_EXT2_V8_3A, ARM_AEXT2_V8_3A): New.
(ARM_ARCH_V8_3A): New.
ARMv8.3 can be selected with -march=armv8.3-a command line option.
An overview of the ARMv8.3 architecture extension is at
https://community.arm.com/groups/processors/blog/2016/10/27/armv8-a-architecture-2016-additions
gas/
2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com>
* config/tc-aarch64.c (aarch64_archs): Add "armv8.3-a".
* doc/c-aarch64.texi (-march): Likewise.
include/
2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_V8_3): Define.
(AARCH64_ARCH_V8_3): Define.
(AARCH64_ARCH_V8_1, AARCH64_ARCH_V8_2): Simplify.
2016-11-04 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (cortex-m33): Declare new processor.
* doc/c-arm.texi (-mcpu ARM command line option): Document new
Cortex-M33 processor.
* NEWS: Mention ARM Cortex-M33 support.
2016-11-04 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (cortex-m23): Declare new processor.
* doc/c-arm.texi (-mcpu ARM command line option): Document new
Cortex-M23 processor.
* NEWS: Mention ARM Cortex-M23 support.
This adds an option for the Qualcomm falkor core, the corresponding
gcc patch is here:
https://gcc.gnu.org/ml/gcc-patches/2016-11/msg00262.html
This was tested with aarch64 and armhf builds and make check and also
by building and running SPEC2006.
* config/tc-aarch64.c (aarch64_cpus): Add falkor.
* config/tc-arm.c (arm_cpus): Likewise.
* doc/c-aarch64.texi: Likewise.
* doc/c-arm.texi: Likewise.
This patch adds support for .cfi_val_offset GAS pseudo command which
maps to DW_CFA_val_offset and DW_CFA_val_offset_sf.
gas/ChangeLog:
2016-09-29 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* doc/as.texinfo: Add docu for .cfi_val_offset.
* dw2gencfi.c (cfi_add_CFA_val_offset): New function.
(dot_cfi): Add case for DW_CFA_val_offset.
(output_cfi_insn): Likewise.
(cfi_pseudo_table): Add entry for cfi_val_offset.
* dw2gencfi.h: Add prototype for cfi_add_CFA_val_offset.
* testsuite/gas/cfi/cfi-common-8.d: New test.
* testsuite/gas/cfi/cfi-common-8.s: New test.
* testsuite/gas/cfi/cfi.exp: Run cfi-common-8 testcase.
binutils/ChangeLog:
2016-09-29 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* dwarf.c (display_debug_frames): Adjust output line.
Before SPARC V9 the effect of having a delayed branch instruction in the
delay slot of a conditional delayed branch was undefined.
In SPARC V9 DCTI couples are well defined.
However, starting with the UltraSPARC Architecture 2005, DCTI
couples (of all kind) are deprecated and should not be used, as they may
be slow or behave differently to what the programmer expects.
This patch adds a new command line option --dcti-couples-detect to `as',
disabled by default, that makes the assembler to warn the user if an
unpredictable DCTI couple is found. Tests and documentation are
included.
gas/ChangeLog:
2016-09-14 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c (md_assemble): Detect and warning on
unpredictable DCTI couples in certain arches.
(dcti_couples_detect): New global.
(md_longopts): Add command line option -dcti-couples-detect.
(md_show_usage): Document -dcti-couples-detect.
(md_parse_option): Handle OPTION_DCTI_COUPLES_DETECT.
* testsuite/gas/sparc/sparc.exp (gas_64_check): Run
dcti-couples-v8, dcti-couples-v9 and dcti-couples-v9c tests.
* testsuite/gas/sparc/dcti-couples.s: New file.
* testsuite/gas/sparc/dcti-couples-v9c.d: Likewise.
* testsuite/gas/sparc/dcti-couples-v8.d: Likewise.
* testsuite/gas/sparc/dcti-couples-v9.d: Likewise.
* testsuite/gas/sparc/dcti-couples-v9c.l: Likewise.
* testsuite/gas/sparc/dcti-couples-v8.l: Likewise.
* doc/as.texinfo (Overview): Document --dcti-couples-detect.
* doc/c-sparc.texi (Sparc-Opts): Likewise.
This patch adds alternate CPU names which adhere to the number of the
architecture document. So instead of having z196, zEC12, and z13 you
can use arch9, arch10, and arch11. The old cpu names stay valid and
should primarily be used.
The alternate names are supposed to improve compatibility with the IBM
XL compiler toolchain which uses the arch numbering.
opcodes/ChangeLog:
2016-09-12 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-mkopc.c (main): Support alternate arch strings.
gas/ChangeLog:
2016-09-12 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* config/tc-s390.c (s390_parse_cpu): Support alternate arch
strings.
* doc/as.texinfo: Document new arch strings.
* doc/c-s390.texi: Likewise.
PR gas/20247
* as.h (do_not_pad_sections_to_alignment): New global variable.
* as.c (show_usage): Add --no-pad-sections.
(parse_args): Likewise.
* write.c (size_seg): Skip padding the end of the section if
requested from the command line.
(SUB_SEGMENT_ALIGN): Likewise.
* doc/as.texinfo: Document the new option.
* NEWS: Mention the new feature.
* testsuite/gas/elf/section11.s: New test.
* testsuite/gas/elf/section11.d: New test driver.
* testsuite/gas/elf/elf.exp: Run the new test.
This patch adds the architecture extension "+ras" to enable RAS
support. It is enabled by default for -march=armv8.2-a and available but
disabled by default for armv8-a and armv8.1-a.
gas/
* config/tc-arm.c (arm_ext_v8_2): Rename to arm_ext_ras.
(arm_ext_ras): Renamed from arm_ext_v8_2.
(insns): Update for arm_ext_v8_2 renaming.
(arm_extensions): Add "ras".
* doc/c-arm.texi (ARM Options): Add an entry for "ras".
* testsuite/gas/arm/armv8-a+ras.d: New.
* testsuite/gas/arm/armv8_2-a.d: Add explicit command line
options.
include/
* opcode/arm.h (ARM_EXT2_RAS): New. Also align preceding
entries.
(ARM_AEXT_V8_2A): Add ARM_EXT2_RAS.
opcodes/
* arm-dis.c (arm_opcodes): Replace ARM_EXT_V8_2A with
ARM_EXT_RAS in relevant entries.
Add nps400 to the list of acceptable values for the -mcpu command line
switch, and to the .cpu directive.
I've added an extra cross reference from -mcpu to .cpu to improve
navigation of the documentation.
gas/ChangeLog:
* doc/c-arc.texi (ARC Options): Add nps400 to list of valus for
-mcpu. Add cross reference to .cpu directive from -mcpu option.
(ARC Directives): Add NPS400 to .cpu directive list.
The RAS extension was introduced as part of the ARMv8.2 architecture
where it is a required feature. It is also available as an optional
feature for ARMv8 and ARMv8.1. In binutils, the RAS extension is
currently enabled by default for -march=armv8.2-a but is not available
for -march=armv8 or -march=armv8.1-a.
This patch adds the feature extension '+ras' to enable the RAS extension
for ARMv8 and ARMv8.1, it is disabled by default.
gas/
2016-04-20 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (aarch64_features): Add "ras".
* doc/c-aarch64.texi (AArch64 Extensions): Add "ras".
* testsuite/gas/aarch64/armv8-ras-1.d: New.
* testsuite/gas/aarch64/armv8-ras-1.s: New.
* testsuite/gas/aarch64/illegal-ras-1.d: New.
* testsuite/gas/aarch64/illegal-ras-1.s: New.
Change-Id: I824fb9bc8cf846bcc03aa17a726efb1350d78b9d
gas * doc/as.texinfo: Place the target specific command line options
into their own man page section.
etc * texi2pod.pl: Add TARGET to the list of recognised man page
sections.
gas * doc/as.texinfo (.section): Document that numeric values can now
be used for the flags and type fields of the ELF target's .section
directive. Add notes about the restrictions on setting flags and
types.
* config/obj-elf.c (obj_elf_change_section): Allow known sections
to be given processor specific section types. Allow processor and
application specific flags of a section to be set after
definition.
(obj_elf_parse_section_letters): Handle parsing numeric values.
(obj_elf_section_type): Handle parsing numeric values.
(obj_elf_section): Allow numeric type values.
* config/obj-elf.h (obj_elf_change_section): Update prototype.
* testsuite/gas/elf/section10.d: New test.
* testsuite/gas/elf/section10.s: Source file for new test.
* testsuite/gas/elf/elf.exp: Run the new test.
* testsuite/gas/i386/ilp32/x86-64-unwind.d: Remove dependency upon
the description of the flags produced by readelf.
* testsuite/gas/tic6x/scomm-directive-4.d: Likewise.
* NEWS: Mention the new feature.
bfd * elf-bfd.h (struct bfd_elf_special_section): Use unsigned values
for length and type fields. Use a signed value for the
suffix_length field.
binutils* readelf.c (get_section_type_name): Add hex prefix to offsets
printed for LOPROC and LOOS values. Ensure that a result is
always returned for the V850 target, even when an unrecognised
processor specific value is encountered.
(process_section_headers): Display key values in the order in
which they appear to the user. Add the "C (compressed)" value to
the list.
ld * testsuite/ld-i386/pr12718.d: Remove dependency upon the
description of the flags produced by readelf.
* testsuite/ld-i386/pr12921.d: Likewise.
* testsuite/ld-i386/tlsbin-nacl.rd: Likewise.
* testsuite/ld-i386/tlsbin.rd: Likewise.
* testsuite/ld-i386/tlsbindesc-nacl.rd: Likewise.
* testsuite/ld-i386/tlsbindesc.rd: Likewise.
* testsuite/ld-i386/tlsdesc-nacl.rd: Likewise.
* testsuite/ld-i386/tlsdesc.rd: Likewise.
* testsuite/ld-i386/tlsgdesc-nacl.rd: Likewise.
* testsuite/ld-i386/tlsgdesc.rd: Likewise.
* testsuite/ld-i386/tlsnopic-nacl.rd: Likewise.
* testsuite/ld-i386/tlsnopic.rd: Likewise.
* testsuite/ld-i386/tlspic-nacl.rd: Likewise.
* testsuite/ld-i386/tlspic.rd: Likewise.
* testsuite/ld-s390/tlsbin.rd: Likewise.
* testsuite/ld-s390/tlsbin_64.rd: Likewise.
* testsuite/ld-s390/tlspic.rd: Likewise.
* testsuite/ld-s390/tlspic_64.rd: Likewise.
* testsuite/ld-sh/tlsbin-2.d: Likewise.
* testsuite/ld-sh/tlspic-2.d: Likewise.
* testsuite/ld-tic6x/common.d: Likewise.
* testsuite/ld-tic6x/shlib-1.rd: Likewise.
* testsuite/ld-tic6x/shlib-1b.rd: Likewise.
* testsuite/ld-tic6x/shlib-1r.rd: Likewise.
* testsuite/ld-tic6x/shlib-1rb.rd: Likewise.
* testsuite/ld-tic6x/shlib-app-1.rd: Likewise.
* testsuite/ld-tic6x/shlib-app-1b.rd: Likewise.
* testsuite/ld-tic6x/shlib-app-1r.rd: Likewise.
* testsuite/ld-tic6x/shlib-app-1rb.rd: Likewise.
* testsuite/ld-tic6x/shlib-noindex.rd: Likewise.
* testsuite/ld-tic6x/static-app-1.rd: Likewise.
* testsuite/ld-tic6x/static-app-1b.rd: Likewise.
* testsuite/ld-tic6x/static-app-1r.rd: Likewise.
* testsuite/ld-tic6x/static-app-1rb.rd: Likewise.
* testsuite/ld-x86-64/ilp32-4-nacl.d: Likewise.
* testsuite/ld-x86-64/ilp32-4.d: Likewise.
* testsuite/ld-x86-64/pr12718.d: Likewise.
* testsuite/ld-x86-64/pr12921.d: Likewise.
* testsuite/ld-x86-64/split-by-file-nacl.rd: Likewise.
* testsuite/ld-x86-64/split-by-file.rd: Likewise.
* testsuite/ld-x86-64/tlsbin-nacl.rd: Likewise.
* testsuite/ld-x86-64/tlsbin.rd: Likewise.
* testsuite/ld-x86-64/tlsbindesc-nacl.rd: Likewise.
* testsuite/ld-x86-64/tlsbindesc.rd: Likewise.
* testsuite/ld-x86-64/tlsdesc-nacl.rd: Likewise.
* testsuite/ld-x86-64/tlsdesc.rd: Likewise.
* testsuite/ld-x86-64/tlsgdesc-nacl.rd: Likewise.
* testsuite/ld-x86-64/tlsgdesc.rd: Likewise.
* testsuite/ld-x86-64/tlspic-nacl.rd: Likewise.
* testsuite/ld-x86-64/tlspic.rd: Likewise.
* testsuite/ld-xtensa/tlsbin.rd: Likewise.
* testsuite/ld-xtensa/tlspic.rd: Likewise.
PR gas/19614
* dw2gencfi.c (cfi_sections_set): Delay setting this variable
until it is actually used.
(cfi_set_sections): Set cfi_sections_set to true.
(dot_cfi_startproc): Likewise.
(dot_cfi_endproc): Likewise.
(dot_cfi_fde_data): Likewise.
(cfi_finish): Likewise.
(dot_cfi_sections): Do not set cfi_sections_set.
* doc/as.texinfo (.cfi_sections): Note that targets can provide
their own cfi section name. Also note that the directive can be
reissued provided that CFI generation has not started.
* testsuite/gas/mips/compact-eh-err2.s: Add .cfi_startproc and
.cfi_endproc directives so that the redefinition of .cfi_sections
will trigger the generation of the error message.
* testsuite/gas/mips/compact-eh-err2.l: Update expected line
number of error message.
bfd/ChangeLog:
* elf32-arm.c ((elf32_arm_special_sections): Remove catch of noread
section using '.text.noread' pattern.
gas/ChangeLog:
* config/obj-elf.c (obj_elf_change_section) : Allow arm section with
SHF_ARM_NOREAD section flag.
* config/tc-arm.h (md_elf_section_letter) : Implement this hook to
handle letter 'y'.
(arm_elf_section_letter) : Declare it.
* config/tc-arm.c (arm_elf_section_letter): Handle letter 'y' to set
SHF_ARM_NOREAD section flag.
* doc/c-arm.texi (ARM section attribute 'y'): Document it.
gas/testsuite/ChangeLog:
* gas/arm/section-execute-only.s: New test case.
* gas/arm/section-execute-only.d: Expected output.
ld/testsuite/ChangeLog:
* ld-arm/thumb1-noread-not-present-mixing-two-section.s: Add 'y'
attribute usage.
* ld-arm/thumb1-noread-present-one-section.s: Likewise.
* ld-arm/thumb1-noread-present-two-section.s: Likewise.
* ld-arm/thumb1-input-section-flag-match.s: Likewise.
binutils/ChangeLog:
* readelf.c (get_elf_section_flags): Display y letter for section
with SHF_ARM_NOREAD section flag in readelf section output.
(process_section_headers): Add y letter in readelf section output
key mapping for ARM architecture.
PR gas/19386
* doc/as.texinfo (Strings): Prepend a space to index entries that
start with a backslash. This works around a problem in the pdf
generator.
To support thumb1 execute-only code we need to support four new
relocations (R_ARM_THM_ALU_ABS_G0_NC, R_ARM_THM_ALU_ABS_G1_NC,
R_ARM_THM_ALU_ABS_G2_NC and R_ARM_THM_ALU_ABS_G3_NC).
These relocations allow the static linker to finalize construction
of symbol address.
Typical sequence of code to get address of the symbol foo is then
the following :
movs r3, #:upper8_15:#foo
lsls r3, #8
adds r3, #:upper0_7:#foo
lsls r3, #8
adds r3, #:lower8_15:#foo
lsls r3, #8
adds r3, #:lower0_7:#foo
This will give following sequence of text and relocations after
assembly :
4: 2300 movs r3, #0
4: R_ARM_THM_ALU_ABS_G3_NC foo
6: 021b lsls r3, r3, #8
8: 3300 adds r3, #0
8: R_ARM_THM_ALU_ABS_G2_NC foo
a: 021b lsls r3, r3, #8
c: 3300 adds r3, #0
c: R_ARM_THM_ALU_ABS_G1_NC foo
e: 021b lsls r3, r3, #8
10: 3300 adds r3, #0
10: R_ARM_THM_ALU_ABS_G0_NC foo
The Statistical Profile extension included in the ARMv8.2 architecture
adds a number of system registers and a new instruction. This patch set
adds support for the extension to binutils, enabled when
-march=armv8.2-a+profile is given.
The patches in this series:
- Add the new command line option and feature flags.
- Add the new system registers.
- Adjust the maximum number of aliases permitted for an instruction.
- Add support for HINT aliases which take operands.
- Add the new instruction, an alias of the HINT instruction.
This patch adds the option "profile" to the permitted architecture
extensions, disabling it by default.
gas/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (aarch64_features): Add "profile".
* doc/c-aarch64.texi (AArch64 Extensions): Add "profile".
include/opcode/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (AARCH64_FEATURE_PROFILE): New.
Change-Id: If9bb4a9b69a264180f96f8ffaf10b15ced273699
gas/ChangeLog:
2015-12-10 Jose E. Marchesi <jose.marchesi@oracle.com>
* doc/c-sparc.texi (Sparc-Regs): Document the %dN and %qN notation
for floating-point registers.
ARMv8.1 includes CRC as a required extension but this isn't reflected in
the features enabled by -march=armv8.1-a. The FP16 feature modifier also
clashes with AARCH64_FEATURE_V8_1 and the list of features for ARMv8.2
is missing ARMv8.1 features.
This patch enables +crc for -march values of armv8.1-a and later. It
also fixes the values for AARCH64_FEATURE_F16 and makes
AARCH64_ARCH_V8_2 and superset of AARCH64_ARCH_V8_2.
gas/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* doc/c-aarch64.texi (AArch64 Extensions): Update entry for crc.
include/opcode
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (AARCH64_FEATURE_F16): Fix clash with
AARCH64_FEATURE_V8_1.
(AARCH64_ARCH_V8_1): Add AARCH64_FEATURE_CRC.
(AARCH64_ARCH_V8_2): Add AARCH64_FEATURE_CRC and
AARCH64_FEATURE_V8_1.
Change-Id: I8af5369f6df2430b28f6cec92870d2a4d14a7431
Various fixes to linker relaxation. In general, we need to support
relaxing every branch, even if we don't relax it in the assembler,
so we can optionally defer relaxation to the linker.
* elf32-rl78.c (rl78_offset_for_reloc): Add more relocs.
(rl78_elf_relax_section): Add bc/bz/bnc/bnz/bh/bnh. Fix reloc
choices.
* config/rl78-parse.y: Make all branches relaxable via
rl78_linkrelax_branch().
* config/tc-rl78.c (rl78_linkrelax_branch): Mark all relaxable
branches with relocs.
(options): Add OPTION_NORELAX.
(md_longopts): Add -mnorelax.
(md_parse_option): Support OPTION_NORELAX.
(op_type_T): Add bh, sk, call, and br.
(rl78_opcode_type): Likewise.
(rl78_relax_frag): Fix not-relaxing logic. Add sk.
(md_convert_frag): Fix relocation handling.
(tc_gen_reloc): Strip relax relocs when not linker relaxing.
(md_apply_fix): Defer overflow handling for anything that needs a
PLT, to the linker.
* config/tc-rl78.h (TC_FORCE_RELOCATION): Force all relocations to
the linker when linker relaxing.
* doc/c-rl78.texi (norelax): Add.
ARMv8.2 adds optional support for 16-bit operations to the FP and
Adv.SIMD instructions. This patch adds a feature macro for this support
with a new command line option "+fp16" to enable/disable it.
Although the command line option is added as an architecture extension,
it only affects instructions available with when +fp or +simd is
enabled. If +fp16 is specified then it will also enable +fp.
There are currently no FP16 instructions implemented in binutils, this
patch is to enable subsequent work on supporting the extension.
gas/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (aarch64_features): Add "fp16".
* doc/c-aarch64.texi (Architecture Extensions): Add "fp16".
include/opcode/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (AARCH64_FEATURE_F16): New.
(AARCH64_ARCH_V8_2): Add AARCH64_FEATURE_F16 to ARMv8.2
features.
Change-Id: Id2021e0513946e16d0935c2a5b9605574cdff95a
ARMv8.2 is an architectural extension of ARMv8. This patch adds an
architecture feature macro for ARMv8.2 to the binutils ARM target
with GAS command line option -march=armv8.2-a.
gas/
2015-11-19 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-arm.c (arm_archs): Add "armv8.2-a".
* doc/c-arm.texi (-march): Add "armv8.2-a".
include/opcode/
2015-11-19 Matthew Wahab <matthew.wahab@arm.com>
* arm.h (ARM_EXT2_V8_2A): New.
(ARM_ARCH_V8_2A): New.
Change-Id: I9e0f50e3c6cea24e6b87b8b862fd4e1cdcc1052e
ARMv8.2 is an architectural extension of ARMv8. This patch adds an
architecture feature macro for ARMv8.2 to the binutils AArch64 target
with GAS command line option -march=armv8.2-a.
gas/
2015-11-19 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (aarch64_archs): Add "armv8.2-a".
* doc/c-aarch64.texi (-march): Likewise.
include/opcode/
2015-11-19 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (AARCH64_FEATURE_V8_2): New.
(AARCH64_ARCH_V8_2): New.
Change-Id: I129232ab00234a07d18ce4b619607344acb3cbaf
This patch adds support to the AArch64 back-end for the Cortex-A35
processor, as recently announced by ARM. The ARM Cortex-A35 provides
full support for the ARMv8-A architecture, including the CRC extension,
with optional Advanced-SIMD and Floating-Point support. We therefore set
feature flags for this CPU to AARCH64_ARCH_V8 and AARCH64_FEATURE_CRC, in
the same fashion as Cortex-A53 and Cortex-A57.
Tested in a cross environment for AArch64 with no issues.
PR gas/19109
* configure.ac: Add option --enable-compressed-debug-sections.
This sets the default behaviour for compressing debug sections.
* as.c (flag_compress_debug): Define and initialise to
COMPRESS_DEBUG_GABI_ZLIB if DEFAULT_COMPRESS_DEBUG is set.
(show_usage): Indicate whether --no-compress-debug-sections
or --compress-debug-sections is the default.
* config/tc-i386.c (flag_compress_debug): Delete definition.
* doc/as.texinfo (--nocompress-debug-sectionas): Update
description.
* NEWS: Announce the new feature.
* config.in: Regenerate.
* configure: Regenerate.
gas * doc/c-s390.texi: Add documentation.
Add missing code markup.
* config/tc-s390.c (current_flags): New static variable.
(s390_parse_cpu): Parse cpu flags a la "+nohtm" etc.
(s390_setup_opcodes): Use cpu flags to determine the set of opcodes.
Fix indentation.
(md_parse_option): Call s390_parse_cpu with the new signature.
(s390_machine): Likewise.
Keep track of current_flags.
Simplify code a bit.
undefine MAX_HISTORY at end of function.
(s390_machinemode): undefine MAX_HISTORY at end of function.
Update an error message.
tests * gas/s390/s390.exp: Add new tests.
* gas/s390/machine-parsing-1.s: New test file.
* gas/s390/machine-parsing-1.l: Likewise.
* gas/s390/machine-parsing-2.s: Likewise.
* gas/s390/machine-parsing-2.l: Likewise.
* gas/s390/machine-parsing-3.s: Likewise.
* gas/s390/machine-parsing-3.l: Likewise.
* gas/s390/machine-parsing-4.s: Likewise.
* gas/s390/machine-parsing-4.l: Likewise.
* gas/s390/machine-parsing-5.s: Likewise.
* gas/s390/machine-parsing-5.l: Likewise.
* gas/s390/machine-parsing-6.s: Likewise.
* gas/s390/machine-parsing-6.l: Likewise.
opcode * s390.h (S390_INSTR_FLAG_HTM): New flag.
(S390_INSTR_FLAG_VX): New flag.
(S390_INSTR_FLAG_FACILITY_MASK): New flag mask.
opcodes * s390-mkopc.c (main): Parse htm and vx flag.
* s390-opc.txt: Mark instructions from the hardware transactional
memory and vector facilities with the "htm"/"vx" flag.
Auto-litpools is the automated version of text-section-literals: literal
pool candidate frags are planted every N frags and during relaxation
they are turned into actual literal pools where literals are moved to
become reachable for their first reference by L32R instruction.
2015-08-12 David Weatherford <weath@cadence.com>
gas/
* config/tc-xtensa.c (struct litpool_frag, struct litpool_seg):
New structures.
(xtensa_maybe_create_literal_pool_frag): New function.
(litpool_seg_list, auto_litpools, auto_litpool_limit)
(litpool_buf, litpool_slotbuf): New static variables.
(option_auto_litpools, option_no_auto_litpools)
(option_auto_litpool_limit): New enum identifiers.
(md_longopts): Add entries for auto-litpools, no-auto-litpools
and auto-litpool-limit.
(md_parse_option): Handle option_auto_litpools,
option_no_auto_litpools and option_auto_litpool_limit.
(md_show_usage): Add help for --[no-]auto-litpools and
--auto-litpool-limit.
(xtensa_mark_literal_pool_location): Record a place for literal
pool with a call to xtensa_maybe_create_literal_pool_frag.
(get_literal_pool_location): Find highest priority literal pool
or convert candidate to literal pool when auto-litpools are used.
(xg_assemble_vliw_tokens): Create literal pool after jump
instruction.
(xtensa_check_frag_count): Create candidate literal pool every
auto_litpool_limit frags.
(xtensa_relax_frag): Add jump around literals to non-empty
literal pool.
(xtensa_move_literals): Estimate literal pool addresses and move
unreachable literals closer to their users, converting candidate
to literal pool if needed.
(xtensa_switch_to_non_abs_literal_fragment): Only emit error
about missing .literal_position in case auto-litpools are not
used.
* config/tc-xtensa.h (xtensa_relax_statesE): New relaxation
state: RELAX_LITERAL_POOL_CANDIDATE_BEGIN.
* doc/as.texinfo (Xtensa options): Document --auto-litpools and
--no-auto-litpools options.
* doc/c-xtensa.texi (Xtensa options): Likewise.
2015-08-12 Max Filippov <jcmvbkbc@gmail.com>
gas/testsuite/
* gas/xtensa/all.exp: Add auto-litpools to the list of xtensa
tests.
* gas/xtensa/auto-litpools.s: New file: auto-litpools test.
* gas/xtensa/auto-litpools.s: New file: auto-litpools test
result pattern.
All programs in binutils+gdb git repo now support gABI compression
with the SHF_COMPRESSED bit. This patch makes the zlib-gabi option
as compression default for gas, gold, ld and objcopy, instead of the
zlib-gnu option whose outputs are incompatible with gABI.
binutils/
* objcopy.c (copy_file): Set BFD_COMPRESS_GABI if not
zlib-gnu.
* doc/binutils.texi: Change --compress-debug-sections and
--compress-debug-sections=zlib to zlib-gabi.
binutils/testsuite/
* binutils-all/compress.exp: Update.
gas/
* as.c (parse_args): Make --compress-debug-sections and
--compress-debug-sections=zlib the same as
--compress-debug-sections=zlib-gabi.
* doc/as.texinfo: Change --compress-debug-sections and
--compress-debug-sections=zlib to zlib-gabi.
gold/
* compressed_output.cc (Output_compressed_section::set_final_data_size):
Make --compress-debug-sections=zlib the same as
--compress-debug-sections=zlib-gabi.
* testsuite/Makefile.am (flagstest_compress_debug_sections.check):
Expect ".debug_.*" with the SHF_COMPRESSED bit, instead of
".zdebug_".
* testsuite/Makefile.in: Regenerated.
ld/
* emultempl/elf32.em (gld${EMULATION_NAME}_handle_option): Make
--compress-debug-sections=zlib the same as
--compress-debug-sections=zlib-gabi.
* ld.texinfo: Change --compress-debug-sections=zlib to zlib-gabi.
ld/testsuite/
* ld-elf/zlibbegin.rS: Updated to .debug_.* with the
SHF_COMPRESSED bit.
* ld-elf/zlibnormal.rS: Likewise.
Back in the day support for these processors was added, we probably
didn't want to waste PPC_OPCODE bits on minor variations. I've had a
complaint that disassembly of mfspr/mtspr was wrong for power8. This
patch fixes that problem.
Note that since -m860/-m850/-m821 are new gas options enabling the
mpc8xx specific mfspr/mtspr variants it is possible that this change
will break some mpc8xx assembly code. ie. you might need to modify
makefiles to pass -m860 to gas.
include/opcode/
* ppc.h (PPC_OPCODE_750, PPC_OPCODE_7450, PPC_OPCODE_860): Define.
opcodes/
* ppc-opc.c (PPC750, PPC7450, PPC860): Define using PPC_OPCODE_*.
* ppc-dis.c (ppc_opts): Add 821, 850 and 860 entries. Add
PPC_OPCODE_7450 to 7450 entry. Add PPC_OPCODE_750 to 750cl entry.
gas/
* config/tc-ppc.c (md_show_usage): Add -m821, -m850, -m860.
* doc/c-ppc.texi (PowerPC-Opts): Likewise.
gas/testsuite/
* gas/ppc/titan.d: Correct mfmcsrr0 disassembly.
Commit 2f0c68f23b added an extra @section
.cfi_lsda:
@subsection @code{.cfi_lsda @var{encoding} [, @var{exp}]}
+@section @code{.cfi_lsda @var{encoding} [, @var{exp}]}
@code{.cfi_lsda} defines LSDA and its encoding.
It shouldn't be there.
* doc/as.texinfo (.cfi_lsda): Remove the extra @section.
This patch adds the ability to automatically construct a section name
based on the prior section.
When gas is invoked with --sectname-subst, the occurrence of %S in a
section name will be substituted by the name of the current section. For
example:
.macro exception_code
.pushsection %S.exception
[exception code here]
.popsection
.endm
.text
[code]
exception_code
[...]
.section .init
[init code]
exception_code
[...]
The first and second exception_code invocations create the
.text.exception and the .init.exception sections respectively. This is
useful e.g. to discriminate between anciliary sections that are tied to
.init code and can be discarded at run time when initialization is over
vs anciliary sections tied to .text sections that need to stay resident.
* as.c (show_usage): Document --sectname-subst.
(parse_args): Add --sectname-subst.
* as.h (flag_sectname_subst): New.
* config/obj-elf.c (obj_elf_section_name): Add %S substitution.
* doc/as.texinfo: Document it.
AMD64 spec and Intel64 spec differ in direct unconditional branches in
64-bit mode. AMD64 supports direct unconditional branches with 16-bit
offset via the data size prefix, which truncates RIP to 16 bits, while
the data size prefix is ignored by Intel64.
This patch adds -mamd64/-mintel64 option to x86-64 assembler and
-Mamd64/-Mintel64 option to x86-64 disassembler. The most permissive
ISA, which is AMD64, is the default.
GDB can add an option, similar to
(gdb) help set disassembly-flavor
Set the disassembly flavor.
The valid values are "att" and "intel", and the default value is "att".
to select which ISA to disassemble.
binutils/
PR binutis/18386
* doc/binutils.texi: Document -Mamd64 and -Mintel64.
gas/
PR binutis/18386
* config/tc-i386.c (OPTION_MAMD64): New.
(OPTION_MINTEL64): Likewise.
(md_longopts): Add -mamd64 and -mintel64.
(md_parse_option): Handle OPTION_MAMD64 and OPTION_MINTEL64.
(md_show_usage): Add -mamd64 and -mintel64.
* doc/c-i386.texi: Document -mamd64 and -mintel64.
gas/testsuite/
PR binutis/18386
* gas/i386/i386.exp: Run x86-64-branch-2 and x86-64-branch-3.
* gas/i386/x86-64-branch.d: Also pass -Mintel64 to objdump.
* gas/i386/ilp32/x86-64-branch.d: Likewise.
* gas/i386/x86-64-branch-2.d: New file.
* gas/i386/x86-64-branch-2.s: Likewise.
* gas/i386/x86-64-branch-3.l: Likewise.
* gas/i386/x86-64-branch-3.s: Likewise.
ld/testsuite/
PR binutis/18386
* ld-x86-64/tlsgdesc.dd: Also pass -Mintel64 to objdump.
* ld-x86-64/tlspic.dd: Likewise.
* ld-x86-64/x86-64.exp (x86_64tests): Also pass -Mintel64 to
objdump for tlspic.dd and tlsgdesc.dd.
opcodes/
PR binutis/18386
* i386-dis.c: Add comments for '@'.
(x86_64_table): Use '@' on call/jmp for X86_64_E8/X86_64_E9.
(enum x86_64_isa): New.
(isa64): Likewise.
(print_i386_disassembler_options): Add amd64 and intel64.
(print_insn): Handle amd64 and intel64.
(putop): Handle '@'.
(OP_J): Don't ignore the operand size prefix for AMD64 in 64-bit.
* i386-gen.c (cpu_flags): Add CpuAMD64 and CpuIntel64.
* i386-opc.h (AMD64): New.
(CpuIntel64): Likewise.
(i386_cpu_flags): Add cpuamd64 and cpuintel64.
* i386-opc.tbl: Add direct call/jmp with Disp16|Disp32 for AMD64.
Mark direct call/jmp without Disp16|Disp32 as Intel64.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
This patch adds -mshared option to x86 ELF assembler. By default,
assembler will optimize out non-PLT relocations against defined non-weak
global branch targets with default visibility. The -mshared option tells
the assembler to generate code which may go into a shared library
where all non-weak global branch targets with default visibility can
be preempted. The resulting code is slightly bigger. This option
only affects the handling of branch instructions.
This Linux kernel patch is needed to create a working x86 Linux kernel if
it hasn't been applied:
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index ae6588b..b91a00c 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -339,8 +339,8 @@ early_idt_handlers:
i = i + 1
.endr
-/* This is global to keep gas from relaxing the jumps */
-ENTRY(early_idt_handler)
+/* This is weak to keep gas from relaxing the jumps */
+WEAK(early_idt_handler)
cld
cmpl $2,(%rsp) # X86_TRAP_NMI
--
gas/
* config/tc-i386.c (shared): New.
(OPTION_MSHARED): Likewise.
(elf_symbol_resolved_in_segment_p): Add relocation argument.
Check PLT relocations and shared.
(md_estimate_size_before_relax): Pass fragP->fr_var to
elf_symbol_resolved_in_segment_p.
(md_longopts): Add -mshared.
(md_show_usage): Likewise.
(md_parse_option): Handle OPTION_MSHARED.
* doc/c-i386.texi: Document -mshared.
gas/testsuite/
* gas/i386/i386.exp: Don't run pcrel for ELF targets. Run
pcrel-elf, relax-4 and x86-64-relax-3 for ELF targets.
* gas/i386/pcrel-elf.d: New file.
* gas/i386/relax-4.d: Likewise.
* gas/i386/x86-64-relax-3.d: Likewise.
* gas/i386/relax-3.d: Pass -mshared to assembler. Updated.
* gas/i386/x86-64-relax-2.d: Likewise.
* gas/i386/relax-3.s: Add test for PLT relocation.
On ELF target, the assembler normally generates code which can go into a
shared library where non-weak symbols can be preempted. The -mno-shared
option tells the assembler to generate code not for a shared library,
where non-weak symbols won't be preempted. The resulting code is slightly
smaller. This option mainly affects the handling of branch instructions.
gas/
* config/tc-i386.c (no_shared): New.
(OPTION_MNO_SHARED): Likewise.
(elf_symbol_resolved_in_segment_p): Check no_shared.
(md_longopts): Add mno-shared.
(md_parse_option): Handle OPTION_MNO_SHARED.
(md_show_usage): Add -mno-shared.
* doc/c-i386.texi: Document -mno-shared.
gas/testsuite/
* gas/i386/i386.exp: Run relax-4 and x86-64-relax-3.
* gas/i386/relax-4.d: New file.
* gas/i386/x86-64-relax-3.d: Likewise.
gas/ChangeLog:
2015-05-06 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c (sparc_ip): Support the %ncc "natural"
condition codes
* doc/c-sparc.texi (Sparc-Regs): Document %ncc.
gas/testsuite/ChangeLog:
2015-05-06 Jose E. Marchesi <jose.marchesi@oracle.com>
* gas/sparc/natural.s: New file.
* gas/sparc/natural-32.s: Likewise.
* gas/sparc/natural.d: Likewise.
* gas/sparc/natural-32.d: Likewise.
* gas/sparc/sparc.exp (sparc_elf_setup): Run the tests natural and
natural-32.
PR gas/18347
gas * config/tc-arm.c (md_undefined_symbol): Issue a warning message
(if enabled) when the user creates a symbol with the same name as
an ARM instruction.
(flag_warn_syms): New static variable.
(arm_opts): Add mwarn-syms and mno-warn-syms.
* doc/c-arm.texi (ARM Options): Document the -m[no-]warn-syms
options.
tests * gas/arm/pr18347.s: New file: Test case.
* gas/arm/pr18347.l: New file: Expected assembler output.
* gas/arm/pr18347.d: New file: Test driver.
Ramana Radhakrishnan
Alexandre Oliva
Andreas Krebbel
Georg-Johann Lay
James Greenhalgh
Tamar Christina
Jiong Wang
Maciej W. Rozycki
Thomas Preud'homme
Jim Wilson
Jose E. Marchesi
Claudiu Zissulescu
H.J. Lu
Pip Cet
Palmer Dabbelt
Nick Clifton
Richard Earnshaw
Alan Modra
Szabolcs Nagy
Richard Sandiford
Igor Tsimbalist
Dimitar Dimitrov
Andrew Waterman
Siddhesh Poyarekar
Vlad Zakharov
Graham Markall
Virendra Pathak
Matthew Wahab
Kyrylo Tkachov
Matthew Fortune
Alexander Fomin
Andrew Burgess
Martin Galvan
Ulrich Drepper
Trevor Saunders
Andrew Senkevich
Mickael Guene
Yoshinori Sato
DJ Delorie
Peter Bergner
Dominik Vogt
Max Filippov
Robert Suchanek
Richard Sandiford
Sandra Loosemore
Amit Pawar
Nicolas Pitre
Catherine Moore