dad60f8e13
2013-03-11 Sebastian Huber <sebastian.huber@embedded-brains.de>
...
include/
* opcode/nios2.h (OPX_WRPRS): New define.
(OP_MATCH_WRPRS): Likewise.
opcodes/
* nios2-opc.c (nios2_builtin_opcodes): Add entry for wrprs.
gas/
* config/tc-nios2.c (nios2_assemble_args_ds): New function.
(nios2_arg_info_structs): Add "d,s" and "d,s,E" entries.
gas/testsuite/
* gas/nios2/nios2.exp: Run wrprs.
* gas/nios2/wrprs.d: New file.
* gas/nios2/wrprs.s: Likewise.
2013-03-12 02:41:26 +00:00
f5cb796a1e
2013-03-11 Sebastian Huber <sebastian.huber@embedded-brains.de>
...
include/
* opcode/nios2.h (OP_RDPRS): New define.
(OP_MATCH_RDPRS): Likewise.
opcodes/
* nios2-opc.c (nios2_builtin_opcodes): Add entry for rdprs.
gas/testsuite/
* gas/nios2/nios2.exp: Run rdprs.
* gas/nios2/rdprs.d: New file.
* gas/nios2/rdprs.s: Likewise.
2013-03-12 02:20:08 +00:00
dd5181d57f
Add support for AArch32 CRC instruction in ARMv8.
...
gas/ChangeLog
2013-03-11 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
* config/tc-arm.c (crc_ext_armv8): New feature set.
(UNPRED_REG): New macro.
(do_crc32_1): New function.
(do_crc32b, do_crc32h, do_crc32w, do_crc32cb,
do_crc32ch, do_crc32cw): Likewise.
(TUEc): New macro.
(insns): Add entries for crc32 mnemonics.
(arm_extensions): Add entry for crc.
include/opcode/ChangeLog
2013-03-11 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
* arm.h (CRC_EXT_ARMV8): New constant.
(ARCH_CRC_ARMV8): New macro.
opcodes/ChangeLog
2013-03-11 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
* arm-dis.c (arm_opcodes): Add entries for CRC instructions.
(thumb32_opcodes): Likewise.
(print_insn_thumb32): Handle 'S' control char.
gas/testsuite/ChangeLog
2013-03-11 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
* gas/arm/crc32-bad.d: New file.
* gas/arm/crc32-bad.l: Likewise.
* gas/arm/crc32-bad.s: Likewise.
* gas/arm/crc32.d: Likewise.
* gas/arm/crc32.s: Likewise.
2013-03-11 11:09:33 +00:00
e60bb1dd35
include/opcode/
...
* aarch64.h (AARCH64_FEATURE_CRC): New macro.
opcodes/
* aarch64-tbl.h (QL_I3SAMEW, QL_I3WWX): New macros.
(aarch64_feature_crc): New static.
(CRC): New macro.
(aarch64_opcode_table): Add entries for the crc32b, crc32h, crc32w,
crc32x, crc32cb, crc32ch, crc32cw and crc32cx instructions.
* aarch64-asm-2.c: Re-generate.
* aarch64-dis-2.c: Ditto.
* aarch64-opc-2.c: Ditto.
gas/
* config/tc-aarch64.c (aarch64_features): Add the 'crc' option.
gas/testsuite/
* gas/aarch64/crc32.s: New test.
* gas/aarch64/crc32.d: Ditto.
2013-02-28 19:18:40 +00:00
36591ba149
2013-02-06 Sandra Loosemore <sandra@codesourcery.com>
...
Andrew Jenner <andrew@codesourcery.com>
Based on patches from Altera Corporation.
bfd/
* Makefile.am (ALL_MACHINES): Add cpu-nios2.lo.
(ALL_MACHINES_CFILES): Add cpu-nios2.c.
(BFD_BACKENDS): Add elf32-nios2.lo.
(BFD32_BACKENDS_CFILES): Add elf32-nios2.c.
* Makefile.in: Regenerated.
* configure.in: Add entries for bfd_elf32_bignios2_vec and
bfd_elf32_littlenios2_vec.
* configure: Regenerated.
* config.bfd: Add cases for nios2.
* archures.c (enum bfd_architecture): Add bfd_arch_nios2.
(bfd_mach_nios2): Define.
(bfd_nios2_arch): Declare.
(bfd_archures_list): Add bfd_nios2_arch.
* targets.c (bfd_elf32_bignios2_vec): Declare.
(bfd_elf32_littlenios2_vec): Declare.
(_bfd_target_vector): Add entries for bfd_elf32_bignios2_vec and
bfd_elf32_littlenios2_vec.
* elf-bfd.h (enum elf_target_id): Add NIOS2_ELF_DATA.
* reloc.c (enum bfd_reloc_code_real): Add Nios II relocations.
* bfd-in2.h: Regenerated.
* libbfd.h: Regenerated.
* cpu-nios2.c: New file.
* elf32-nios2.c: New file.
opcodes/
* Makefile.am (TARGET_LIBOPCODES_CFILES): Add nios2-dis.c and
nios2-opc.c.
* Makefile.in: Regenerated.
* configure.in: Add case for bfd_nios2_arch.
* configure: Regenerated.
* disassemble.c (ARCH_nios2): Define.
(disassembler): Add case for bfd_arch_nios2.
* nios2-dis.c: New file.
* nios2-opc.c: New file.
include/
* dis-asm.h (print_insn_big_nios2): Declare.
(print_insn_little_nios2): Declare.
include/elf
* nios2.h: New file.
include/opcode/
* nios2.h: New file.
gas/
* Makefile.am (TARGET_CPU_CFILES): Add config/tc-nios2.c.
(TARGET_CPU_HFILES): Add config/tc-nios2.h.
* Makefile.in: Regenerated.
* configure.tgt: Add case for nios2*-linux*.
* config/obj-elf.c: Conditionally include elf/nios2.h.
* config/tc-nios2.c: New file.
* config/tc-nios2.h: New file.
* doc/Makefile.am (CPU_DOCS): Add c-nios2.texi.
* doc/Makefile.in: Regenerated.
* doc/all.texi: Set NIOSII.
* doc/as.texinfo (Overview): Add Nios II options.
(Machine Dependencies): Include c-nios2.texi.
* doc/c-nios2.texi: New file.
* NEWS: Note Altera Nios II support.
gas/testsuite/
* gas/nios2/add.d: New.
* gas/nios2/add.s: New.
* gas/nios2/align_fill.d: New.
* gas/nios2/align_fill.s: New.
* gas/nios2/align_text.d: New.
* gas/nios2/align_text.s: New.
* gas/nios2/and.d: New.
* gas/nios2/and.s: New.
* gas/nios2/branch.d: New.
* gas/nios2/branch.s: New.
* gas/nios2/break.d: New.
* gas/nios2/break.s: New.
* gas/nios2/bret.d: New.
* gas/nios2/bret.s: New.
* gas/nios2/cache.d: New.
* gas/nios2/cache.s: New.
* gas/nios2/call26.d: New.
* gas/nios2/call26.s: New.
* gas/nios2/call.d: New.
* gas/nios2/call.s: New.
* gas/nios2/cmp.d: New.
* gas/nios2/cmp.s: New.
* gas/nios2/comments.d: New.
* gas/nios2/comments.s: New.
* gas/nios2/complex.d: New.
* gas/nios2/complex.s: New.
* gas/nios2/ctl.d: New.
* gas/nios2/ctl.s: New.
* gas/nios2/custom.d: New.
* gas/nios2/custom.s: New.
* gas/nios2/etbt.d: New.
* gas/nios2/etbt.s: New.
* gas/nios2/flushda.d: New.
* gas/nios2/flushda.s: New.
* gas/nios2/illegal.l: New.
* gas/nios2/illegal.s: New.
* gas/nios2/jmp.d: New.
* gas/nios2/jmp.s: New.
* gas/nios2/ldb.d: New.
* gas/nios2/ldb.s: New.
* gas/nios2/ldh.d: New.
* gas/nios2/ldh.s: New.
* gas/nios2/ldw.d: New.
* gas/nios2/ldw.s: New.
* gas/nios2/lineseparator.d: New.
* gas/nios2/lineseparator.s: New.
* gas/nios2/mov.d: New.
* gas/nios2/movia.d: New.
* gas/nios2/movia.s: New.
* gas/nios2/movi.d: New.
* gas/nios2/movi.s: New.
* gas/nios2/mov.s: New.
* gas/nios2/mul.d: New.
* gas/nios2/mul.s: New.
* gas/nios2/nios2.exp: New.
* gas/nios2/nor.d: New.
* gas/nios2/nor.s: New.
* gas/nios2/or.d: New.
* gas/nios2/or.s: New.
* gas/nios2/ret.d: New.
* gas/nios2/ret.s: New.
* gas/nios2/rol.d: New.
* gas/nios2/rol.s: New.
* gas/nios2/rotate.d: New.
* gas/nios2/rotate.s: New.
* gas/nios2/stb.d: New.
* gas/nios2/stb.s: New.
* gas/nios2/sth.d: New.
* gas/nios2/sth.s: New.
* gas/nios2/stw.d: New.
* gas/nios2/stw.s: New.
* gas/nios2/sub.d: New.
* gas/nios2/sub.s: New.
* gas/nios2/sync.d: New.
* gas/nios2/sync.s: New.
* gas/nios2/trap.d: New.
* gas/nios2/trap.s: New.
* gas/nios2/tret.d: New.
* gas/nios2/tret.s: New.
* gas/nios2/warn_noat.l: New.
* gas/nios2/warn_noat.s: New.
* gas/nios2/warn_nobreak.l: New.
* gas/nios2/warn_nobreak.s: New.
* gas/nios2/xor.d: New.
* gas/nios2/xor.s: New.
ld/
* Makefile.am (enios2elf.c): New rule.
* Makefile.in: Regenerated.
* configure.tgt: Add case for nios2*-*-*.
* emulparams/nios2elf.sh: New file.
* NEWS: Note Altera Nios II support.
ld/testsuite/
* ld-nios2/emit-relocs-1a.s: New.
* ld-nios2/emit-relocs-1b.s: New.
* ld-nios2/emit-relocs-1.d: New.
* ld-nios2/emit-relocs-1.ld: New.
* ld-nios2/gprel.d: New.
* ld-nios2/gprel.s: New.
* ld-nios2/hilo16.d: New.
* ld-nios2/hilo16.s: New.
* ld-nios2/hilo16_symbol.s: New.
* ld-nios2/imm5.d: New.
* ld-nios2/imm5.s: New.
* ld-nios2/imm5_symbol.s: New.
* ld-nios2/nios2.exp: New.
* ld-nios2/pcrel16.d: New.
* ld-nios2/pcrel16_label.s: New.
* ld-nios2/pcrel16.s: New.
* ld-nios2/relax_callr.d: New.
* ld-nios2/relax_callr.ld: New.
* ld-nios2/relax_callr.s: New.
* ld-nios2/relax_cjmp.d: New.
* ld-nios2/relax_cjmp.s: New.
* ld-nios2/relax_jmp.ld: New.
* ld-nios2/relax_section.d: New.
* ld-nios2/relax_section.s: New.
* ld-nios2/relax_ujmp.d: New.
* ld-nios2/relax_ujmp.s: New.
* ld-nios2/reloc.d: New.
* ld-nios2/reloc.s: New.
* ld-nios2/reloc_symbol.s: New.
* ld-nios2/s16.d: New.
* ld-nios2/s16.s: New.
* ld-nios2/s16_symbol.s: New.
* ld-nios2/u16.d: New.
* ld-nios2/u16.s: New.
* ld-nios2/u16_symbol.s: New.
* ld-elf/indirect.exp: Skip on targets that don't support
-shared -fPIC.
* ld-elfcomm/elfcomm.exp: Build with -G0 for nios2.
* ld-plugin/lto.exp: Skip shared library tests on targets that
don't support them. Skip execution tests on non-native targets.
binutils/
* readelf.c: Include elf/nios2.h.
(dump_relocations): Add case for EM_ALTERA_NIOS2.
(get_nios2_dynamic_type): New.
(get_dynamic_type): Add case for EM_ALTERA_NIOS2.
(is_32bit_abs_reloc): Fix EM_ALTERA_NIOS2 case.
(is_16bit_abs_reloc): Likewise.
(is_none_reloc): Add EM_ALTERA_NIOS2 and EM_NIOS32 cases.
* NEWS: Note Altera Nios II support.
* MAINTAINERS: Add Nios II maintainers.
2013-02-06 23:22:26 +00:00
e30181a58d
include/opcode/
...
2013-01-30 Yufeng Zhang <yufeng.zhang@arm.com>
* aarch64.h (aarch64_op): Add OP_SXTL, OP_SXTL2, OP_UXTL and OP_UXTL2.
opcodes/
2013-01-30 Yufeng Zhang <yufeng.zhang@arm.com>
* aarch64-tbl.h (aarch64_opcode_table): Flag sshll, sshll2, ushll and
ushll2 with F_HAS_ALIAS. Add entries for sxtl, sxtl2, uxtl and uxtl2.
* aarch64-asm.c (convert_xtl_to_shll): New function.
(convert_to_real): Handle OP_SXTL, OP_SXTL2, OP_UXTL and OP_UXTL2 by
calling convert_xtl_to_shll.
* aarch64-dis.c (convert_shll_to_xtl): New function.
(convert_to_alias): Handle OP_SXTL, OP_SXTL2, OP_UXTL and OP_UXTL2 by
calling convert_shll_to_xtl.
* aarch64-gen.c: Update copyright year.
* aarch64-asm-2.c: Re-generate.
* aarch64-dis-2.c: Re-generate.
* aarch64-opc-2.c: Re-generate.
gas/testsuite/
2013-01-30 Yufeng Zhang <yufeng.zhang@arm.com>
* gas/aarch64/alias.s: Add new tests.
* gas/aarch64/alias.d: Update.
* gas/aarch64/no-aliases.d: Update.
2013-01-30 15:43:32 +00:00
0c9573f43c
PR gas/15069
...
* tic6x-opcode-table.h: Fix encoding of BNOP instruction.
* gas/tic6x/insns-c674x-pcrel.s: Add test of BNOP instruction
within header based fetch packet.
* gas/tic6x/insns-c674x-pcrel.d: Update expected disassembly.
2013-01-28 15:28:40 +00:00
981dc7f155
* v850.h: Add e3v5 support.
2013-01-24 16:51:56 +00:00
f5555712ba
include/opcode/
...
2013-01-17 Yufeng Zhang <yufeng.zhang@arm.com>
* aarch64.h (aarch64_op): Remove OP_V_MOVI_B.
opcodes/
2013-01-17 Yufeng Zhang <yufeng.zhang@arm.com>
* aarch64-asm.c (aarch64_ins_advsimd_imm_modified): Handle 8-bit MOVI.
* aarch64-dis.c (aarch64_ext_advsimd_imm_modified): Likewise.
* aarch64-opc.c (operand_general_constraint_met_p): For
AARCH64_MOD_LSL, move the range check on the shift amount before the
alignment check; change to call set_sft_amount_out_of_range_error
instead of set_imm_out_of_range_error.
* aarch64-tbl.h (QL_SIMD_IMM_B): Replace NIL with LSL.
(aarch64_opcode_table): Remove the OP enumerator from the asimdimm
8-bit MOVI entry; change the 2nd operand from SIMD_IMM to
SIMD_IMM_SFT.
gas/
2013-01-17 Yufeng Zhang <yufeng.zhang@arm.com>
* config/tc-aarch64.c (output_operand_error_record): Change to output
the out-of-range error message as value-expected message if there is
only one single value in the expected range.
(programmer_friendly_fixup): Remove the handling of 8-bit MOVI with
LSL #0 as a programmer-friendly feature.
gas/testsuite/
2013-01-17 Yufeng Zhang <yufeng.zhang@arm.com>
* gas/aarch64/diagnostic.l: Update.
* gas/aarch64/movi.s: Add tests.
* gas/aarch64/movi.d: Update.
* gas/aarch64/programmer-friendly.s: Add comment.
2013-01-17 16:09:44 +00:00
5817ffd1f8
include/opcode/
...
* ppc.h (PPC_OPCODE_POWER8): New define.
(PPC_OPCODE_HTM): Likewise.
opcodes/
* ppc-dis.c (ppc_opts): Add "power8", "pwr8" and "htm" entries.
* ppc-opc.c (HTM_R, HTM_SI, XRTRB_MASK, XRTRARB_MASK, XRTLRARB_MASK,
XRTARARB_MASK, XRTBFRARB_MASK, XRCL, POWER8, PPCHTM): New defines.
(SH6): Update.
<"tabort.", "tabortdc.", "tabortdci.", "tabortwc.",
"tabortwci.", "tbegin.", "tcheck", "tend.", "trechkpt.",
"treclaim.", "tsr.">: Add POWER8 HTM opcodes.
<"tendall.", "tresume.", "tsuspend.">: Add POWER8 HTM extended opcodes.
gas/
* doc/as.texinfo (Target PowerPC): Document -mpower8 and -mhtm.
* doc/c-ppc.texi (PowerPC-Opts): Likewise.
* config/tc-ppc.c (md_show_usage): Likewise.
(ppc_handle_align): Handle power8's group ending nop.
gas/testsuite/
* gas/ppc/htm.d: New test.
* gas/ppc/htm.s: Likewise.
* gas/ppc/power8.d: Likewise.
* gas/ppc/power8.s: Likewise.
* gas/ppc/ppc.exp: Run them.
2013-01-11 02:25:36 +00:00
a3c629886c
* common.h: Fix case of "Meta".
...
* metag.h: New file.
* dis-asm.h (print_insn_metag): New declaration.
* metag.h: New file.
* Makefile.am: Add Meta.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.in: Add Meta.
* disassemble.c: Add Meta support.
* metag-dis.c: New file.
* Makefile.am: Add Meta.
* Makefile.in: Regenerate.
* archures.c (bfd_mach_metag): New.
* bfd-in2.h: Regenerate.
* config.bfd: Add Meta.
* configure: Regenerate.
* configure.in: Add Meta.
* cpu-metag.c: New file.
* elf-bfd.h: Add Meta.
* elf32-metag.c: New file.
* elf32-metag.h: New file.
* libbfd.h: Regenerate.
* reloc.c: Add Meta relocations.
* targets.c: Add Meta.
* Makefile.am: Add Meta.
* Makefile.in: Regenerate.
* config/tc-metag.c: New file.
* config/tc-metag.h: New file.
* configure.tgt: Add Meta.
* doc/Makefile.am: Add Meta.
* doc/Makefile.in: Regenerate.
* doc/all.texi: Add Meta.
* doc/as.texiinfo: Document Meta options.
* doc/c-metag.texi: New file.
* gas/metag/labelarithmetic.d: New file.
* gas/metag/labelarithmetic.s: New file.
* gas/metag/metacore12.d: New file.
* gas/metag/metacore12.s: New file.
* gas/metag/metacore21-invalid.l: New file.
* gas/metag/metacore21-invalid.s: New file.
* gas/metag/metacore21.d: New file.
* gas/metag/metacore21.s: New file.
* gas/metag/metacore21ext.d: New file.
* gas/metag/metacore21ext.s: New file.
* gas/metag/metadsp21-invalid.l: New file.
* gas/metag/metadsp21-invalid.s: New file.
* gas/metag/metadsp21.d: New file.
* gas/metag/metadsp21.s: New file.
* gas/metag/metadsp21ext.d: New file.
* gas/metag/metadsp21ext.s: New file.
* gas/metag/metafpu21.d: New file.
* gas/metag/metafpu21.s: New file.
* gas/metag/metafpu21ext.d: New file.
* gas/metag/metafpu21ext.s: New file.
* gas/metag/metag.exp: New file.
* gas/metag/tls.d: New file.
* gas/metag/tls.s: New file.
* Makefile.am: Add Meta.
* Makefile.in: Regenerate.
* configure.tgt: Add Meta.
* emulparams/elf32metag.sh: New file.
* emultempl/metagelf.em: New file.
* ld-elf/merge.d: Mark Meta as xfail.
* ld-gc/start.d: Skip this test on Meta.
* ld-gc/personality.d: Skip this test on Meta.
* ld-metag/external.s: New file.
* ld-metag/metag.exp: New file.
* ld-metag/pcrel.d: New file.
* ld-metag/pcrel.s: New file.
* ld-metag/shared.d: New file.
* ld-metag/shared.r: New file.
* ld-metag/shared.s: New file.
* ld-metag/stub.d: New file.
* ld-metag/stub.s: New file.
* ld-metag/stub_pic_app.d: New file.
* ld-metag/stub_pic_app.r: New file.
* ld-metag/stub_pic_app.s: New file.
* ld-metag/stub_pic_shared.d: New file.
* ld-metag/stub_pic_shared.s: New file.
* ld-metag/stub_shared.d: New file.
* ld-metag/stub_shared.r: New file.
* ld-metag/stub_shared.s: New file.
* binutils/readelf.c: (guess_is_rela): Add EM_METAG.
(dump_relocations): Add EM_METAG.
(get_machine_name): Correct case for Meta.
(is_32bit_abs_reloc): Add support for Meta ADDR32 reloc.
(is_none_reloc): Add support for Meta NONE reloc.
2013-01-10 09:49:22 +00:00
73335eaedf
(make_instruction): Rename to cr16_make_instruction.
...
(match_opcode): Rename to cr16_match_opcode.
2013-01-07 15:09:07 +00:00
e407c74b5b
* archures.c: Add support for MIPS r5900
...
* bfd-in2.h: Add support for MIPS r5900
* config.bfd: Add support for Sony Playstation 2
* cpu-mips.c: Add support for MIPS r5900
* elfxx-mips.c: Add support for MIPS r5900 (extension of r4000)
* config/tc-mips.c: Add support for MIPS r5900
Add M_LQ_AB and M_SQ_AB to support large values for instructions lq and sq.
* config/tc-mips.c (can_swap_branch_p, get_append_method): Detect some conditional short loops to fix a bug on the r5900 by NOP in the branch delay slot.
* config/tc-mips.c (M_MUL): Support 3 operands in multu on r5900.
* config/tc-mips.c (M_TRUNCWS): Support trunc.w.s on r5900 in MIPS ISA I.
* config/tc-mips.c (s_mipsset): Force 32 bit floating point on r5900.
* configure.in: Detect CPU type when target string contains r5900 (e.g. mips64r5900el-linux-gnu).
* config/tc-mips.c (mips_ip): Check parameter range of instructions mfps and mtps on r5900.
* elf/mips.h: Add MIPS machine variant number for r5900 which is compatible with old Playstation 2 software.
* opcode/mips.h: Add support for r5900 instructions including lq and sq.
* configure.tgt: Support ELF files for Sony Playstation 2 (for ps2dev and ps2sdk).
* emulparams/elf32lr5900n32.sh: Create linker script for Sony Playstation 2 ELF files using MIPS ABI n32.
* emulparams/elf32lr5900.sh: Create linker script for Sony Playstation 2 ELF files using MIPS ABI o32.
* Makefile.am: Add linker scripts for Sony Playstation 2 ELF files.
* opcodes/mips-dis.c: Add names for CP0 registers of r5900.
* opcodes/mips-opc.c: Add M_SQ_AB and M_LQ_AB to support larger range for instructions sq and lq.
* opcodes/mips-opc.c: Add support for MIPS r5900 CPU.
Add support for 128 bit MMI (Multimedia Instructions).
Add support for EE instructions (Emotion Engine).
Disable unsupported floating point instructions (64 bit and undefined compare operations).
Enable instructions of MIPS ISA IV which are supported by r5900.
Disable 64 bit co processor instructions.
Disable 64 bit multiplication and division instructions.
Disable instructions for co-processor 2 and 3, because these are not supported (preparation for later VU0 support (Vector Unit)).
Disable cvt.w.s because this behaves like trunc.w.s and the correct execution can't be ensured on r5900.
Add trunc.w.s using the opcode encoding of cvt.w.s on r5900. This will confuse less developers and compilers.
2013-01-04 17:22:53 +00:00
bab4becb12
opcodes/ChangeLog
...
* cr16-dis.c (match_opcode,make_instruction: Remove static declaration.
(dwordU,wordU): Moved typedefs to opcode/cr16.h
(cr16_words,cr16_allWords,cr16_currInsn): Added prefix 'cr16_'
bfd/Changelog
* config.bfd (cr16*-*-uclinux*): New target support.
include/opcode/ChangeLog
* cr16.h (dwordU,wordU): Moved typedefs from cr16-dis.c
(make_instruction,match_opcode): Added function prototypes.
(cr16_words,cr16_allWords,cr16_currInsn): Declare as extern.
2013-01-02 13:13:36 +00:00
5bf135a788
Add copyright notices
2012-12-17 16:56:12 +00:00
752937aa0c
Add copyright notices
2012-12-10 12:48:03 +00:00
776fc41826
include/opcode/
...
* ppc.h (ppc_parse_cpu): Update prototype.
opcodes/
* ppc-dis.c (ppc_parse_cpu): Add "sticky" param. Track bits
set from ppc_opts.sticky in it. Delete "retain_mask".
(powerpc_init_dialect): Choose default dialect from info->mach
before parsing -M options. Handle more bfd_mach_ppc variants.
Update common default to power7.
gas/
* config/tc-ppc.c (sticky): New var.
(md_parse_option, ppc_machine): Update ppc_parse_cpu calls.
gas/testsuite/
* gas/ppc/astest2.d: Pass -Mppc to objdump.
ld/testsuite/
* ld-powerpc/plt1.d: Update for default "at" branch hints.
* ld-powerpc/tlsexe.d: Likewise.
* ld-powerpc/tlsexetoc.d: Likewise.
* ld-powerpc/tlsopt1.d: Likewise.
* ld-powerpc/tlsopt1_32.d: Likewise.
* ld-powerpc/tlsopt2.d: Likewise.
* ld-powerpc/tlsopt2_32.d: Likewise.
* ld-powerpc/tlsopt4.d: Likewise.
* ld-powerpc/tlsopt4_32.d: Likewise.
* ld-powerpc/tlsso.d: Likewise.
* ld-powerpc/tlstocso.d: Likewise.
2012-11-23 03:28:13 +00:00
f05682d460
* hppa.h (pa_opcodes): Use "cX" completer instead of "cx" in fstqx
...
opcodes. Likewise, use "cM" instead of "cm" in fstqs opcodes.
2012-10-15 00:22:35 +00:00
cfc7277920
2012-10-04 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
...
* config/tc-s390.c (s390_parse_cpu): Add new option zEC12.
* doc/as.texinfo: Document new option zEC12.
* doc/c-s390.texi: Likewise.
2012-10-04 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* gas/s390/s390.exp: Run zEC12 tests.
* gas/s390/zarch-zEC12.d: New file.
* gas/s390/zarch-zEC12.s: New file.
2012-10-04 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* s390-mkopc.c: Support new option zEC12.
* s390-opc.c: Add new instruction formats.
* s390-opc.txt: Add new instructions for zEC12.
2012-10-04 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* s390.h (s390_opcode_cpu_val): Add S390_OPCODE_ZEC12.
2012-10-04 08:47:36 +00:00
1415a2a767
Don't abort() when disassembling bad moxie instructions.
2012-09-28 03:53:39 +00:00
b3e14edafc
Add Intel Itanium Series 9500 support
...
bfd/
2012-09-04 Sergey A. Guriev <sergey.a.guriev@intel.com>
* cpu-ia64-opc.c (ins_cnt6a): New function.
(ext_cnt6a): Ditto.
(ins_strd5b): Ditto.
(ext_strd5b): Ditto.
(elf64_ia64_operands): Add new operand types.
gas/
2012-09-04 Sergey A. Guriev <sergey.a.guriev@intel.com>
* config/tc-ia64.c (reg_symbol): Add a new register.
(indirect_reg): Ditto.
(pseudo_func): Add new symbolic constants.
(operand_match): Add new operand types recognition.
(operand_insn): Add new register recognition.
(md_begin): Add new register definition.
(specify_resource): Add new register recognition.
gas/testsuite/
2012-09-04 Sergey A. Guriev <sergey.a.guriev@intel.com>
* gas/testsuite/gas/ia64/psn.d: New file.
* gas/testsuite/gas/ia64/psn.s: New file.
* gas/testsuite/gas/ia64/ia64.exp: Add new testcase.
* gas/testsuite/gas/ia64/opc-i.d: Fixed failing tests.
* gas/testsuite/gas/ia64/opc-m.d: Ditto.
include/opcode/
2012-09-04 Sergey A. Guriev <sergey.a.guriev@intel.com>
* ia64.h (ia64_opnd): Add new operand types.
opcodes/
2012-09-04 Sergey A. Guriev <sergey.a.guriev@intel.com>
* ia64-asmtab.h (completer_index): Extend bitfield to full uint.
* ia64-gen.c: Promote completer index type to longlong.
(irf_operand): Add new register recognition.
(in_iclass_mov_x): Add an entry for the new mov_* instruction type.
(lookup_specifier): Add new resource recognition.
(insert_bit_table_ent): Relax abort condition according to the
changed completer index type.
(print_dis_table): Fix printf format for completer index.
* ia64-ic.tbl: Add a new instruction class.
* ia64-opc-i.c (ia64_opcodes_i): Define new I-instructions.
* ia64-opc-m.c (ia64_opcodes_m): Define new M-instructions.
* ia64-opc.h: Define short names for new operand types.
* ia64-raw.tbl: Add new RAW resource for DAHR register.
* ia64-waw.tbl: Add new WAW resource for DAHR register.
* ia64-asmtab.c: Regenerate.
2012-09-04 13:52:06 +00:00
59d09be6f5
* gas/config/tc-arm.c (check_obsolete): New function.
...
(do_rd_rm_rn): Check swp{b} for obsoletion.
* gas/testsuite/gas/arm/armv8-a-bad.d: New testcase.
* gas/testsuite/gas/arm/armv8-a-bad.l: Likewise.
* gas/testsuite/gas/arm/armv8-a-bad.s: Likewise.
* gas/testsuite/gas/arm/depr-swp.l: Update for change in expected output.
* gas/testsuite/gas/arm/depr-swp.s: Add additional test.
* include/opcode/arm.h (ARM_CPU_IS_ANY): New define.
2012-08-24 07:52:49 +00:00
bca3892142
* bfd/elf32-arm.c (v8): New array.
...
(tag_cpu_arch_combine): Add support for ARMv8 attributes.
(elf32_arm_merge_eabi_attributes): Likewise.
(VFP_VERSION_COUNT): New define.
* binutils/readelf.c (arm_attr_tag_CPU_arch): Update for ARMv8.
(arm_attr_tag_FP_arch): Likewise.
(arm_attr_tag_Advanced_SIMD_arch): Likewise.
* gas/config/tc-arm.h (arm_ext_v8): New variable.
(fpu_vfp_ext_armv8): Likewise.
(fpu_neon_ext_armv8): Likewise.
(fpu_crypto_ext_armv8): Likewise.
(arm_archs): Add armv8-a.
(arm_extensions): Add crypto, fp, and simd.
(arm_fpus): Add fp-armv8, neon-fp-armv8, crypto-neon-fp-armv8.
(cpu_arch_ver): Add support for ARMv8.
(aeabi_set_public_sttributes): Likewise.
* gas/doc/c-arm.texi (ARM Options): Document new architecture and
extension options for ARMv8.
* gas/testsuite/gas/arm/attr-march-all.d: Update for change in expected
output.
* gas/testsuite/gas/arm/attr-mfpu-vfpv4-d16.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-vfpv4.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv8-a+crypto.d: New testcase.
* gas/testsuite/gas/arm/attr-march-armv8-a+fp.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv8-a+simd.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv8-a.d: Likewise.
* include/elf/arm.h (TAG_CPU_ARCH_V8): New define.
(MAX_TAG_CPU_ARCH): Update.
* include/opcode/arm.h (ARM_EXT_V8): New define.
(FPU_VFP_EXT_ARMV8): Likewise.
(FPU_NEON_EXT_ARMV8): Likewise.
(FPU_CRYPTO_EXT_ARMV8): Likewise.
(ARM_AEXT_V8A): Likewise.
(FPU_VFP_ARMV8): Likwise.
(FPU_NEON_ARMV8): Likewise.
(FPU_CRYPTO_ARMV8): Likewise.
(FPU_ARCH_VFP_ARMV8): Likewise.
(FPU_ARCH_NEON_VFP_ARMV8): Likewise.
(FPU_ARCH_CRYPTO_NEON_VFP_ARMV8): Likewise.
(ARM_ARCH_V8A): Likwise.
(ARM_ARCH_V8A_FP): Likewise.
(ARM_ARCH_V8A_SIMD): Likewise.
(ARM_ARCH_V8A_CRYPTO): Likewise.
* ld/testsuite/ld-arm/arm-elf.exp: Add new testcases.
* ld/testsuite/ld-arm/attr-merge-vfp-3.d: Update for change in expected
output.
* ld/testsuite/ld-arm/attr-merge-vfp-3r.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-vfp-4.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-vfp-4r.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-vfp-5.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-vfp-5r.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-vfp-7.d: New testcase.
* ld/testsuite/ld-arm/attr-merge-vfp-7r.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-vfp-armv8-hard.s: Likewise.
* ld/testsuite/ld-arm/attr-merge-vfp-armv8.s: Likewise.
2012-08-24 07:50:38 +00:00
2c63854f55
Fix sparc opcode encoding for 4-arg crypto instructions.
...
include/opcode
* sparc.h (F3F4): New macro.
opcodes
* sparc-opc.c (4-argument crypto instructions): Fix encoding using
F3F4 macro.
gas/testsuite
* gas/sparc/crypto.d: Fix opcodes for 4-arg crypto instructions.
2012-08-21 23:00:36 +00:00
a06ea96464
Add support for 64-bit ARM architecture: AArch64
2012-08-13 14:52:54 +00:00
35d0a16941
include/opcode/
...
* mips.h (mips_opcode): Add the exclusions field.
(OPCODE_IS_MEMBER): Remove macro.
(cpu_is_member): New inline function.
(opcode_is_member): Likewise.
opcodes/
* micromips-opc.c (micromips_opcodes): Update comment.
* mips-opc.c (mips_builtin_opcodes): Likewise. Mark coprocessor
instructions for IOCT as appropriate.
* mips-dis.c (print_insn_mips): Replace OPCODE_IS_MEMBER with
opcode_is_member.
* configure.in: Substitute NO_WMISSING_FIELD_INITIALIZERS with
the result of a check for the -Wno-missing-field-initializers
GCC option.
* Makefile.am (NO_WMISSING_FIELD_INITIALIZERS): New variable.
(mips-opc.lo): Pass $(NO_WMISSING_FIELD_INITIALIZERS) to
compilation.
(mips16-opc.lo): Likewise.
(micromips-opc.lo): Likewise.
* aclocal.m4: Regenerate.
* configure: Regenerate.
* Makefile.in: Regenerate.
gas/
* config/tc-mips.c (NO_ISA_COP, COP_INSN): Remove macros.
(is_opcode_valid): Remove coprocessor instruction exclusions.
Replace OPCODE_IS_MEMBER with opcode_is_member.
(is_opcode_valid_16): Replace OPCODE_IS_MEMBER with
opcode_is_member.
(macro): Remove coprocessor instruction exclusions.
2012-08-13 14:26:14 +00:00
03f66e8a8f
include/opcode/
...
* mips.h: Document microMIPS DSP ASE usage.
(MICROMIPSOP_MASK_DSPACC, MICROMIPSOP_SH_DSPACC): Update for
microMIPS DSP ASE support.
(MICROMIPSOP_MASK_DSPSFT, MICROMIPSOP_SH_DSPSFT): Likewise.
(MICROMIPSOP_MASK_SA3, MICROMIPSOP_SH_SA3): Likewise.
(MICROMIPSOP_MASK_SA4, MICROMIPSOP_SH_SA4): Likewise.
(MICROMIPSOP_MASK_IMM8, MICROMIPSOP_SH_IMM8): Likewise.
(MICROMIPSOP_MASK_IMM10, MICROMIPSOP_SH_IMM10): Likewise.
(MICROMIPSOP_MASK_WRDSP, MICROMIPSOP_SH_WRDSP): Likewise.
(MICROMIPSOP_MASK_BP, MICROMIPSOP_SH_BP): Likewise.
gas/
* config/tc-mips.c (macro_build) <'2'>: Handle microMIPS.
(macro) <M_BALIGN>: Update error handling.
(validate_micromips_insn) <'2', '3', '4', '5', '6'>: New cases.
<'7', '8', '0', '@', '^'>: Likewise.
(mips_ip) <'2', '3', '4', '5', '6', '7', '8'>: Handle microMIPS.
<'9'>: Fix formatting.
<'0', '@'>: Handle microMIPS.
<'^'>: New case.
gas/testsuite/
* gas/mips/micromips@mips32-dsp.d: New.
* gas/mips/micromips@mips32-dspr2.d: New.
* gas/mips/mips32-dsp.d: Remove -mips32r2.
* gas/mips/mips32-dspr2.d: Likewise.
* gas/mips/mips.exp: (mips_create_arch): Use -mips64r2
for micromips. Use run_dump_test_arches to run dsp tests.
opcodes/
* micromips-opc.c (WR_a, RD_a, MOD_a): New macros.
(DSP_VOLA): Likewise.
(D32, D33): Likewise.
(micromips_opcodes): Add DSP ASE instructions.
* micromips-dis.c (print_insn_micromips) <'2', '3'>: New cases.
<'4', '5', '6', '7', '8', '0', '^', '@'>: Likewise.
2012-07-31 21:38:54 +00:00
9d7b4c23ac
* mips.h: Fix a typo in description.
2012-07-06 14:20:22 +00:00
3879925e69
gas/config/
...
* tc-xgate.c: Revised assembler so that operands
are collected before the addressing mode is
determined.
include/opcode/
* xgate.h: Changed the format string for mode
XGATE_OP_DYA_MON.
opcodes/
* xgate-dis.c: Removed an IF statement that will
always be false due to overlapping operand masks.
* xgate-opc.c: Corrected 'com' opcode entry and
fixed spacing.
2012-07-05 19:37:52 +00:00
76e879f8e4
* avr.h: (AVR_ISA_XCH): New define.
...
(AVR_ISA_XMEGA): Use it.
(XCH, LAS, LAT, LAC): New XMEGA opcodes.
2012-06-07 16:43:36 +00:00
6927f98292
* config/tc-m68hc11.c: Add S12X and XGATE co-processor support.
...
Add option to offset S12 addresses into XGATE memory space.
Tweak target flags to match other tools. (i.e. -m m68hc11).
* doc/as.texinfo: Mention new options.
* doc/c-m68hc11.texi: Document new options.
* NEWS: Mention new support.
* archures.c: Add bfd_arch_m9s12x and bfd_arch_m9s12xg.
* config.bfd: Likewise.
* cpu-m9s12x.c: New.
* cpu-m9s12xg.c: New.
* elf32-m68hc12.c: Add S12X and XGATE co-processor support.
Add option to offset S12 addresses into XGATE memory space.
Fix carry bug in IMM16 (IMM8 low/high) relocate.
* Makefile.am (ALL_MACHINES): Add cpu-m9s12x and cpu-m9s12xg.
(ALL_MACHINES_CFILES): Likewise.
* reloc.c: Add S12X relocs.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* gas/m68hc11/insns9s12x.s: New
* gas/m68hc11/insns9s12x.d: New
* gas/m68hc11/hexprefix.s: New
* gas/m68hc11/hexprefix.d: New
* gas/m68hc11/9s12x-exg-sex-tfr.s: New
* gas/m68hc11/9s12x-exg-sex-tfr.d: New
* gas/m68hc11/insns9s12xg.s: New
* gas/m68hc11/insns9s12xg.d: New
* gas/m68hc11/9s12x-mov.s: New
* gas/m68hc11/9s12x-mov.d: New
* gas/m68hc11/m68hc11.exp: Updated
* gas/m68hc11/*.d: Brought in line with changed objdump output.
* gas/all/gas.exp: XFAIL all hc11/12 targets for redef2,3.
* gas/elf/elf.exp: XFAIL all hc11/12 targets for redef.
* gas/elf/dwarf2-1.d: Skip for hc11/12 targets.
* gas/elf/dwarf2-2.d: Likewise.
* ld-m68hc11/xgate-link.s: New.
* ld-m68hc11/xgate-link.d: New.
* ld-m68hc11/xgate-offset.s: New.
* ld-m68hc11/xgate-offset.d: New.
* ld-m68hc11/xgate1.s: New.
* ld-m68hc11/xgate1.d: New.
* ld-m68hc11/xgate2.s: New.
* ld-m68hc11/m68hc11.exp: Updated.
* ld-m68hc11/*.d: Brought in line with changed objdump output.
* ld-gc/gc.exp: Update CFLAGS for m68hc11.
* ld-plugin/plugin.exp: Likewise.
* ld-srec/srec.exp: XFAIL for m68hc11 and m68hc12.
* configure.in: Add S12X and XGATE co-processor support to m68hc11
target.
* disassemble.c: Likewise.
* configure: Regenerate.
* m68hc11-dis.c: Make objdump output more consistent, use hex
instead of decimal and use 0x prefix for hex.
* m68hc11-opc.c: Add S12X and XGATE opcodes.
* dis-asm.h (print_insn_m9s12x): Prototype.
(print_insn_m9s12xg): Prototype.
* m68hc11.h (R_M68HC12_16B, R_M68HC12_PCREL_9, R_M68HC12_PCREL_10)
R_M68HC12_HI8XG, R_M68HC12_LO8XG): New relocations.
(E_M68HC11_XGATE_RAMOFFSET): Define.
* m68hc11.h: Add XGate definitions.
(struct m68hc11_opcode): Add xg_mask field.
2012-05-15 12:55:51 +00:00
b9c361e0ad
Add support for PowerPC VLE.
...
2012-05-14 Catherine Moore <clm@codesourcery.com>
* NEWS: Mention PowerPC VLE port.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
Catherine Moore <clm@codesourcery.com>
bfd/
* bfd.c (bfd_lookup_section_flags): Add section parm.
* ecoff.c (bfd_debug_section): Remove flag_info initializer.
* elf-bfd.h (bfd_elf_section_data): Move in section_flag_info.
(bfd_elf_lookup_section_flags): Add section parm.
* elf32-ppc.c (is_ppc_vle): New function.
(ppc_elf_modify_segment_map): New function.
(elf_backend_modify_segment_map): Define.
(has_vle_insns): New define.
* elf32-ppc.h (ppc_elf_modify_segment_map): Declare.
* elflink.c (bfd_elf_lookup_section_flags): Add return value & parm.
Move in logic to omit / include a section.
* libbfd-in.h (bfd_link_info): Add section parm.
(bfd_generic_lookup_section_flags): Likewise.
* reloc.c (bfd_generic_lookup_section_flags): Likewise.
* section.c (bfd_section): Move out section_flag_info.
(BFD_FAKE_SECTION): Remove flag_info initializer.
* targets.c (_bfd_lookup_section_flags): Add section parm.
2012-05-14 Catherine Moore <clm@codesourcery.com>
bfd/
* archures.c (bfd_mach_ppc_vle): New.
* bfd-in2.h: Regenerated.
* cpu-powerpc.c (bfd_powerpc_archs): New entry for vle.
* elf32-ppc.c (split16_format_type): New enumeration.
(ppc_elf_vle_split16): New function.
(HOWTO): Add entries for R_PPC_VLE relocations.
(ppc_elf_reloc_type_lookup): Handle PPC_VLE relocations.
(ppc_elf_section_flags): New function.
(ppc_elf_lookup_section_flags): New function.
(ppc_elf_section_processing): New function.
(ppc_elf_check_relocs): Handle PPC_VLE relocations.
(ppc_elf_relocation_section): Likewise.
(elf_backend_lookup_section_flags_hook): Define.
(elf_backend_section_flags): Define.
(elf_backend_section_processing): Define.
* elf32-ppc.h (ppc_elf_section_processing): Declare.
* libbfd.h: Regenerated.
* reloc.c (BFD_RELOC_PPC_VLE_REL8, BFD_RELOC_PPC_VLE_REL15,
BFD_RELOC_PPC_VLE_REL24, BFD_RELOC_PPC_VLE_LO16A,
BFD_RELOC_PPC_VLE_LO16D, BFD_RELOC_PPC_VLE_HI16A,
BFD_RELOC_PPC_VLE_HI16D, BFD_RELOC_PPC_VLE_HA16A,
BFD_RELOC_PPC_VLE_HA16D, BFD_RELOC_PPC_VLE_SDA21,
BFD_RELOC_PPC_VLE_SDA21_LO, BFD_RELOC_PPC_VLE_SDAREL_LO16A,
BFD_RELOC_PPC_VLE_SDAREL_LO16D, BFD_RELOC_PPC_VLE_SDAREL_HI16A,
BFD_RELOC_PPC_VLE_SDAREL_HI16D, BFD_RELOC_PPC_VLE_SDAREL_HA16A,
BFD_RELOC_PPC_VLE_SDAREL_HA16D): New bfd relocations.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
gas/
* config/tc-ppc.c (insn_validate): New func of existing code to call..
(ppc_setup_opcodes): ..from 2 places here.
Revise for second (VLE) opcode table.
Add #ifdef'd code to print opcode tables.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
gas/
* config/tc-ppc.c (ppc_setup_opcodes): Allow out-of-order
for the VLE conditional branches.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
gas/
* config/tc-ppc.c (PPC_VLE_SPLIT16A): New macro.
(PPC_VLE_SPLIT16D): New macro.
(PPC_VLE_LO16A): New macro.
(PPC_VLE_LO16D): New macro.
(PPC_VLE_HI16A): New macro.
(PPC_VLE_HI16D): New macro.
(PPC_VLE_HA16A): New macro.
(PPC_VLE_HA16D): New macro.
(PPC_APUINFO_VLE): New definition.
(md_chars_to_number): New function.
(md_parse_option): Check for combinations of little
endian and -mvle.
(md_show_usage): Document -mvle.
(ppc_arch): Recognize VLE.
(ppc_mach): Recognize bfd_mach_ppc_vle.
(ppc_setup_opcodes): Print the opcode table if
* config/tc-ppc.h (ppc_frag_check): Declare.
* doc/c-ppc.texi: Document -mvle.
* NEWS: Mention PowerPC VLE port.
2012-05-14 Catherine Moore <clm@codesourcery.com>
gas/
* config/tc-ppc.h (ppc_dw2_line_min_insn_length): Declare.
(DWARF2_LINE_MIN_INSN_LENGTH): Redefine.
* config/tc-ppc.c (ppc_dw2_line_min_insn_length): New.
* dwarf2dbg.c (scale_addr_delta): Handle values of 1
for DWARF2_LINE_MIN_INSN_LENGTH.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
gas/testsuite/
* gas/ppc/ppc.exp: Run new tests.
* gas/ppc/vle-reloc.d: New test.
* gas/ppc/vle-reloc.s: New test.
* gas/ppc/vle-simple-1.d: New test.
* gas/ppc/vle-simple-1.s: New test.
* gas/ppc/vle-simple-2.d: New test.
* gas/ppc/vle-simple-2.s: New test.
* gas/ppc/vle-simple-3.d: New test.
* gas/ppc/vle-simple-3.s: New test.
* gas/ppc/vle-simple-4.d: New test.
* gas/ppc/vle-simple-4.s: New test.
* gas/ppc/vle-simple-5.d: New test.
* gas/ppc/vle-simple-5.s: New test.
* gas/ppc/vle-simple-6.d: New test.
* gas/ppc/vle-simple-6.s: New test.
* gas/ppc/vle.d: New test.
* gas/ppc/vle.s: New test.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
include/elf/
* ppc.h (SEC_PPC_VLE): Remove.
2012-05-14 Catherine Moore <clm@codesourcery.com>
James Lemke <jwlemke@codesourcery.com>
include/elf/
* ppc.h (R_PPC_VLE_REL8): New reloction.
(R_PPC_VLE_REL15): Likewise.
(R_PPC_VLE_REL24): Likewise.
(R_PPC_VLE_LO16A): Likewise.
(R_PPC_VLE_LO16D): Likewise.
(R_PPC_VLE_HI16A): Likewise.
(R_PPC_VLE_HI16D): Likewise.
(R_PPC_VLE_HA16A): Likewise.
(R_PPC_VLE_HA16D): Likewise.
(R_PPC_VLE_SDA21): Likewise.
(R_PPC_VLE_SDA21_LO): Likewise.
(R_PPC_VLE_SDAREL_LO16A): Likewise.
(R_PPC_VLE_SDAREL_LO16D): Likewise.
(R_PPC_VLE_SDAREL_HI16A): Likewise.
(R_PPC_VLE_SDAREL_HI16D): Likewise.
(R_PPC_VLE_SDAREL_HA16A): Likewise.
(R_PPC_VLE_SDAREL_HA16D): Likewise.
(SEC_PPC_VLE): Remove.
(PF_PPC_VLE): New program header flag.
(SHF_PPC_VLE): New section header flag.
(vle_opcodes, vle_num_opcodes): New.
(VLE_OP): New macro.
(VLE_OP_TO_SEG): New macro.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
include/opcode/
* ppc.h (PPC_OPCODE_VLE): New definition.
(PPC_OP_SA): New macro.
(PPC_OP_SE_VLE): New macro.
(PPC_OP): Use a variable shift amount.
(powerpc_operand): Update comments.
(PPC_OPSHIFT_INV): New macro.
(PPC_OPERAND_CR): Replace with...
(PPC_OPERAND_CR_BIT): ...this and
(PPC_OPERAND_CR_REG): ...this.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
ld/
* ldlang.c (walk_wild_consider_section): Don't copy section_flag_list.
Pass it to callback.
(walk_wild_section_general): Pass section_flag_list to callback.
(lang_add_section): Add sflag_list parm.
Move out logic to keep / omit a section & call bfd_lookup_section_flags.
(output_section_callback_fast): Add sflag_list parm.
Add new parm to lang_add_section calls.
(output_section_callback): Likewise.
(check_section_callback): Add sflag_list parm.
(lang_place_orphans): Add new parm to lang_add_section calls.
(gc_section_callback): Add sflag_list parm.
(find_relro_section_callback): Likewise.
* ldlang.h (callback_t): Add flag_info parm.
(lang_add_section): Add sflag_list parm.
* emultempl/armelf.em (elf32_arm_add_stub_section):
Add lang_add_section parm.
* emultempl/beos.em (gld*_place_orphan): Likewise.
* emultempl/elf32.em (gld*_place_orphan): Likewise.
* emultempl/hppaelf.em (hppaelf_add_stub_section): Likewise.
* emultempl/m68hc1xelf.em (m68hc11elf_add_stub_section): Likewise.
* emultempl/mipself.em (mips_add_stub_section): Likewise.
* emultempl/mmo.em (mmo_place_orphan): Likewise.
* emultempl/pe.em (gld_*_place_orphan): Likewise.
* emultempl/pep.em (gld_*_place_orphan): Likewise.
* emultempl/ppc64elf.em (ppc_add_stub_section): Likewise.
* emultempl/spuelf.em (spu_place_special_section): Likewise.
* emultempl/vms.em (vms_place_orphan): Likewise.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
ld/testsuite/
* ld-powerpc/powerpc.exp: Create ppceabitests.
* ld-powerpc/vle-multiseg.s: New.
* ld-powerpc/vle-multiseg-1.d: New.
* ld-powerpc/vle-multiseg-1.ld: New.
* ld-powerpc/vle-multiseg-2.d: New.
* ld-powerpc/vle-multiseg-2.ld: New.
* ld-powerpc/vle-multiseg-3.d: New.
* ld-powerpc/vle-multiseg-3.ld: New.
* ld-powerpc/vle-multiseg-4.d: New.
* ld-powerpc/vle-multiseg-4.ld: New.
* ld-powerpc/vle-multiseg-5.d: New.
* ld-powerpc/vle-multiseg-5.ld: New.
* ld-powerpc/vle-multiseg-6.d: New.
* ld-powerpc/vle-multiseg-6.ld: New.
* ld-powerpc/vle-multiseg-6a.s: New.
* ld-powerpc/vle-multiseg-6b.s: New.
* ld-powerpc/vle-multiseg-6c.s: New.
* ld-powerpc/vle-multiseg-6d.s: New.
* ld-powerpc/powerpc.exp: Run new tests.
2012-05-14 Catherine Moore <clm@codesourcery.com>
ld/
* NEWS: Mention PowerPC VLE port.
2012-05-14 Catherine Moore <clm@codesourcery.com>
ld/testsuite/
* ld-powerpc/apuinfo.rd: Update for VLE.
* ld-powerpc/vle-reloc-1.d: New.
* ld-powerpc/vle-reloc-1.s: New.
* ld-powerpc/vle-reloc-2.d: New.
* ld-powerpc/vle-reloc-2.s: New.
* ld-powerpc/vle-reloc-3.d: New.
* ld-powerpc/vle-reloc-3.s: New.
* ld-powerpc/vle-reloc-def-1.s: New.
* ld-powerpc/vle-reloc-def-2.s: New.
* ld-powerpc/vle-reloc-def-3.s: New.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
opcodes/
* ppc-dis.c (get_powerpc_dialect): Use is_ppc_vle.
(PPC_OPCD_SEGS, VLE_OPCD_SEGS): New defines.
(vle_opcd_indices): New array.
(lookup_vle): New function.
(disassemble_init_powerpc): Revise for second (VLE) opcode table.
(print_insn_powerpc): Likewise.
* ppc-opc.c: Likewise.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
Nathan Froyd <froydnj@codesourcery.com>
opcodes/
* ppc-opc.c (insert_arx, extract_arx): New functions.
(insert_ary, extract_ary): New functions.
(insert_li20, extract_li20): New functions.
(insert_rx, extract_rx): New functions.
(insert_ry, extract_ry): New functions.
(insert_sci8, extract_sci8): New functions.
(insert_sci8n, extract_sci8n): New functions.
(insert_sd4h, extract_sd4h): New functions.
(insert_sd4w, extract_sd4w): New functions.
(insert_vlesi, extract_vlesi): New functions.
(insert_vlensi, extract_vlensi): New functions.
(insert_vleui, extract_vleui): New functions.
(insert_vleil, extract_vleil): New functions.
(BI_MASK, BB_MASK, BT): Use PPC_OPERAND_CR_BIT.
(BI16, BI32, BO32, B8): New.
(B15, B24, CRD32, CRS): New.
(CRD, OBF, BFA, CR, CRFS): Use PPC_OPERAND_CR_REG.
(DB, IMM20, RD, Rx, ARX, RY, RZ): New.
(ARY, SCLSCI8, SCLSCI8N, SE_SD, SE_SDH): New.
(SH6_MASK): Use PPC_OPSHIFT_INV.
(SI8, UI5, OIMM5, UI7, BO16): New.
(VLESIMM, VLENSIMM, VLEUIMM, VLEUIMML): New.
(XT6, XA6, XB6, XB6S, XC6): Use PPC_OPSHIFT_INV.
(ALLOW8_SPRG): New.
(insert_sprg, extract_sprg): Check ALLOW8_SPRG.
(OPVUP, OPVUP_MASK OPVUP): New
(BD8, BD8_MASK, BD8IO, BD8IO_MASK): New.
(EBD8IO, EBD8IO1_MASK, EBD8IO2_MASK, EBD8IO3_MASK): New.
(BD15, BD15_MASK, EBD15, EBD15_MASK, EBD15BI, EBD15BI_MASK): New.
(BD24,BD24_MASK, C_LK, C_LK_MASK, C, C_MASK): New.
(IA16, IA16_MASK, I16A, I16A_MASK, I16L, I16L_MASK): New.
(IM7, IM7_MASK, LI20, LI20_MASK, SCI8, SCI8_MASK): New.
(SCI8BF, SCI8BF_MASK, SD4, SD4_MASK): New.
(SE_IM5, SE_IM5_MASK): New.
(SE_R, SE_R_MASK, SE_RR, SE_RR_MASK): New.
(EX, EX_MASK, BO16F, BO16T, BO32F, BO32T): New.
(BO32DNZ, BO32DZ): New.
(NO371, PPCSPE, PPCISEL, PPCEFS, MULHW): Include PPC_OPCODE_VLE.
(PPCVLE): New.
(powerpc_opcodes): Add new VLE instructions. Update existing
instruction to include PPCVLE if supported.
* ppc-dis.c (ppc_opts): Add vle entry.
(get_powerpc_dialect): New function.
(powerpc_init_dialect): VLE support.
(print_insn_big_powerpc): Call get_powerpc_dialect.
(print_insn_little_powerpc): Likewise.
(operand_value_powerpc): Handle negative shift counts.
(print_insn_powerpc): Handle 2-byte instruction lengths.
2012-05-14 19:45:30 +00:00
f6c1a2d592
Add support for Motorola XGATE embedded CPU
2012-05-03 13:12:08 +00:00
6cda13266f
Add support for SPARC T4 crypto instructions.
...
include/opcode/
* sparc.h: Document new arg code' )' for crypto RS3
immediates.
opcodes/
* sparc-dis.c (print_insn_sparc): Handle ')'.
* sparc-opc.c (sparc_opcodes): Add crypto instructions.
gas/
* config/tc-sparc.c (sparc_ip): Likewise. Accept instruction
names containing "_".
(sparc_arch_table): Add sparc4, v8pluse, and v9e. Add crypto
hwcap masks to v8plusv and v9v.
gas/testsuite/
* gas/sparc/crypto.s: New file.
* gas/sparc/crypto.d: New file.
* gas/sparc/sparc.exp: Run crypto test.
2012-04-27 18:02:35 +00:00
ec668d69b9
Move sparc opcode hwcaps out of sparc_opcode flags field.
...
include/opcode/
* sparc.h (struct sparc_opcode): New field 'hwcaps'.
F_MUL32, F_DIV32, F_FDMULD, F_V8PLUS, F_POPC, F_VIS, F_VIS2,
F_ASI_BLK_INIT, F_FMAF, F_VIS3, F_HPC, F_RANDOM, F_TRANS,
F_FJFMAU, F_IMA, F_ASI_CACHE_SPARING, F_HWCAP_MASK): Delete.
(HWCAP_MUL32, HWCAP_DIV32, HWCAP_FSMULD, HWCAP_V8PLUS, HWCAP_POPC,
HWCAP_VIS, HWCAP_VIS2, HWCAP_ASI_BLK_INIT, HWCAP_FMAF,
HWCAP_VIS3, HWCAP_HPC, HWCAP_RANDOM, HWCAP_TRANS, HWCAP_FJFMAU,
HWCAP_IMA, HWCAP_ASI_CACHE_SPARING, HWCAP_AES, HWCAP_DES,
HWCAP_KASUMI, HWCAP_CAMELLIA, HWCAP_MD5, HWCAP_SHA1,
HWCAP_SHA256, HWCAP_SHA512, HWCAP_MPMUL, HWCAP_MONT, HWCAP_PAUSE,
HWCAP_CBCOND, HWCAP_CRC32): New defines.
opcodes/
* sparc-opc.c (sparc_opcodes): Rework table to put HWCAP values
into new struct sparc_opcode 'hwcaps' field instead of 'flags'.
gas/
* config/tc-sparc.c (sparc_arch_table): Rework to use HWCAP_*
masks.
(sparc_md_end): No longer need to translate hwcap_seen values into
ELF hwcap bits, they now match exactly.
(get_hwcap_name): Use HWCAP_* and handle new values.
(sparc_ip): Fetch hwcaps from insn->hwcaps instead of insn->flags.
2012-04-27 18:01:35 +00:00
2615994e91
Support R_SPARC_WDISP10 and R_SPARC_H34.
...
include/
* elf/sparc.h (R_SPARC_WDISP10): New reloc.
* opcode/sparc.h: Define '=' as generating R_SPARC_WDISP10.
opcodes/
* sparc-dis.c (X_DISP10): Define.
(print_insn_sparc): Handle '='.
bfd/
* reloc.c (BFD_RELOC_SPARC_H34, BFD_RELOC_SPARC_SIZE32,
BFD_RELOC_SPARC_SIZE64, BFD_RELOC_SPARC_WDISP10): New relocs.
* libbfd.h: Regenerate.
* bfd-in2.h: Likewise.
* elfxx-sparc.c (sparc_elf_wdisp10_reloc): New function.
(_bfd_sparc_elf_howto_table): Add entries for R_SPARC_H34,
R_SPARC_SIZE32, R_SPARC_64, and R_SPARC_WDISP10.
(_bfd_sparc_elf_reloc_type_lookup): Handle new relocs.
(_bfd_sparc_elf_check_relocs): Likewise.
(_bfd_sparc_elf_gc_sweep_hook): Likewise.
(_bfd_sparc_elf_relocate_section): Likewise.
gas/
* config/tc-sparc.c (sparc_ip): Handle '=', "%h34", "%l34", and
BFD_RELOC_SPARC_H34.
(md_apply_fix): Handle BFD_RELOC_SPARC_WDISP10 and BFD_RELOC_SPARC_H34.
(tc_gen_reloc): Likewise.
gas/testsuite/
* gas/sparc/reloc64.s: Add abs34 code model tests.
* gas/sparc/reloc64.d: Update.
elfcpp/
* sparc.h (R_SPARC_WDISP10): New relocation.
gold/
* sparc.cc (Reloc::wdisp10): New relocation method.
(Reloc::h34): Likewise.
(Target_sparc::Scan::check_non_pic): Handle R_SPARC_H34.
(Target_sparc::Scan::get_reference_flags): Handle R_SPARC_H34 and
R_SPARC_WDISP10.
(Target_sparc::Scan::local): Likewise.
(Target_sparc::Scan::global): Likewise.
(Target_sparc::Relocate::relocate): Likewise.
2012-04-12 16:26:06 +00:00
aea77599d0
include/opcode/
...
* ppc.h: Add PPC_OPCODE_ALTIVEC2, PPC_OPCODE_E6500, PPC_OPCODE_TMR.
opcodes/
* ppc-dis.c (ppc_opts): Add entries for "e5500" and "e6500".
* ppc-opc.c (insert_ls, TMR, ESYNC, XSYNCLE_MASK): New.
(PPCVEC2, PPCTMR, E6500): New short names.
(powerpc_opcodes): Add vabsdub, vabsduh, vabsduw, dni, mvidsplt,
mviwsplt, icblq., mftmr, mttmr, dcblq., miso, lvexbx, lvexhx,
lvexwx, stvexbx, stvexhx, stvexwx, lvepx, lvepxl, stvepx, stvepxl,
lvtrx, lvtrxl, lvtlx, lvtlxl, stvfrx, stvfrxl, stvflx, stvflxl,
lvswx, lvswxl, stvswx, stvswxl, lvsm mnemonics. Accept LS, ESYNC
optional operands on sync instruction for E6500 target.
bfd/
* archures.c: Add bfd_mach_ppc_e5500 and bfd_mach_ppc_e6500.
* bfd-in2.h: Regenerate.
* cpu-powerpc.c (bfd_powerpc_archs): Add entryies for
bfd_mach_ppc_e5500 and bfd_mach_ppc_e6500.
gas/
* config/tc-ppc.c (md_show_usage): Document -me5500 and -me6500.
(ppc_handle_align): Add termination nop opcode for e500mc family.
* doc/as.texinfo: Document options -me5500 and -me6500.
* doc/c-ppc.texi: Likewise.
gas/testsuite/
* gas/ppc/e500mc64_nop.s: New test case for e500mc family
termination nops.
* gas/ppc/e500mc64_nop.d: Likewise.
* gas/ppc/e5500_nop.s: Likewise.
* gas/ppc/e5500_nop.d: Likewise.
* gas/ppc/e6500_nop.s: Likewise.
* gas/ppc/e6500_nop.d: Likewise.
* gas/ppc/e6500.s: New.
* gas/ppc/e6500.d: Likewise.
* gas/ppc/ppc.exp: Run e6500, e500mc64_nop, e5500_nop, and e6500_nop.
2012-03-09 23:39:06 +00:00
1f42f8b31d
gas/
...
* config/tc-crx.c: Include bfd_stdint.h.
(getconstant): Remove irrelevant comment. Don't fail due to
sign-extension of int mask.
(check_range): Rewrite using unsigned arithmetic throughout.
opcodes/
* crx-dis.c (print_arg): Mask constant to 32 bits.
* crx-opc.c (cst4_map): Use int array.
include/opcode/
* crx.h (cst4_map): Update declaration.
2012-02-27 06:37:40 +00:00
6f7be9592d
Improve TLS support on TILE-Gx/TILEPro:
...
- Add support for TLS LE references.
- Support linker optimization of TLS references.
- Delete relocations of GOT/tp relative offsets beyond 32-bits.
This brings binutils in line with the support expected in gcc 4.7, for
TILE-Gx/TILEPro.
bfd/
* reloc.c: Add BFD_RELOC_TILEPRO_TLS_GD_CALL,
BFD_RELOC_TILEPRO_IMM8_X0_TLS_GD_ADD,
BFD_RELOC_TILEPRO_IMM8_X1_TLS_GD_ADD,
BFD_RELOC_TILEPRO_IMM8_Y0_TLS_GD_ADD,
BFD_RELOC_TILEPRO_IMM8_Y1_TLS_GD_ADD,
BFD_RELOC_TILEPRO_TLS_IE_LOAD, BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE,
BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE,
BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_LO,
BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_LO,
BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HI,
BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HI,
BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HA,
BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HA,
BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_LE,
BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_LE,
BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_LE,
BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_LE,
BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_LE,
BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_LE,
BFD_RELOC_TILEGX_TLS_GD_CALL, BFD_RELOC_TILEGX_IMM8_X0_TLS_GD_ADD,
BFD_RELOC_TILEGX_IMM8_X1_TLS_GD_ADD,
BFD_RELOC_TILEGX_IMM8_Y0_TLS_GD_ADD,
BFD_RELOC_TILEGX_IMM8_Y1_TLS_GD_ADD, BFD_RELOC_TILEGX_TLS_IE_LOAD,
BFD_RELOC_TILEGX_IMM8_X0_TLS_ADD,
BFD_RELOC_TILEGX_IMM8_X1_TLS_ADD,
BFD_RELOC_TILEGX_IMM8_Y0_TLS_ADD, BFD_RELOC_TILEGX_IMM8_Y1_TLS_ADD.
Delete BFD_RELOC_TILEGX_IMM16_X0_HW1_GOT,
BFD_RELOC_TILEGX_IMM16_X1_HW1_GOT,
BFD_RELOC_TILEGX_IMM16_X0_HW2_GOT,
BFD_RELOC_TILEGX_IMM16_X1_HW2_GOT,
BFD_RELOC_TILEGX_IMM16_X0_HW3_GOT,
BFD_RELOC_TILEGX_IMM16_X1_HW3_GOT,
BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_GOT,
BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_GOT,
BFD_RELOC_TILEGX_IMM16_X0_HW1_TLS_GD,
BFD_RELOC_TILEGX_IMM16_X1_HW1_TLS_GD,
BFD_RELOC_TILEGX_IMM16_X0_HW2_TLS_GD,
BFD_RELOC_TILEGX_IMM16_X1_HW2_TLS_GD,
BFD_RELOC_TILEGX_IMM16_X0_HW3_TLS_GD,
BFD_RELOC_TILEGX_IMM16_X1_HW3_TLS_GD,
BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_TLS_GD,
BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_TLS_GD,
BFD_RELOC_TILEGX_IMM16_X0_HW1_TLS_IE,
BFD_RELOC_TILEGX_IMM16_X1_HW1_TLS_IE,
BFD_RELOC_TILEGX_IMM16_X0_HW2_TLS_IE,
BFD_RELOC_TILEGX_IMM16_X1_HW2_TLS_IE,
BFD_RELOC_TILEGX_IMM16_X0_HW3_TLS_IE,
BFD_RELOC_TILEGX_IMM16_X1_HW3_TLS_IE,
BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_TLS_IE,
BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_TLS_IE.
* elf32-tilepro.c (tilepro_elf_howto_table): Update tilepro
relocations.
(tilepro_reloc_map): Ditto.
(tilepro_info_to_howto_rela): Ditto.
(reloc_to_create_func): Ditto.
(tilepro_tls_translate_to_le): New.
(tilepro_tls_translate_to_ie): New.
(tilepro_elf_tls_transition): New.
(tilepro_elf_check_relocs): Handle new tls relocations.
(tilepro_elf_gc_sweep_hook): Ditto.
(allocate_dynrelocs): Ditto.
(tilepro_elf_relocate_section): Ditto.
(tilepro_replace_insn): New.
(insn_mask_X1): New.
(insn_mask_X0_no_dest_no_srca): New
(insn_mask_X1_no_dest_no_srca): New
(insn_mask_Y0_no_dest_no_srca): New
(insn_mask_Y1_no_dest_no_srca): New
(srca_mask_X0): New
(srca_mask_X1): New
(insn_tls_le_move_X1): New
(insn_tls_le_move_zero_X0X1): New
(insn_tls_ie_lw_X1): New
(insn_tls_ie_add_X0X1): New
(insn_tls_ie_add_Y0Y1): New
(insn_tls_gd_add_X0X1): New
(insn_tls_gd_add_Y0Y1): New
* elfxx-tilegx.c (tilegx_elf_howto_table): Update tilegx
relocations.
(tilegx_reloc_map): Ditto.
(tilegx_info_to_howto_rela): Ditto.
(reloc_to_create_func): Ditto.
(tilegx_elf_link_hash_table): New field disable_le_transition.
(tilegx_tls_translate_to_le): New.
(tilegx_tls_translate_to_ie): New.
(tilegx_elf_tls_transition): New.
(tilegx_elf_check_relocs): Handle new tls relocations.
(tilegx_elf_gc_sweep_hook): Ditto.
(allocate_dynrelocs): Ditto.
(tilegx_elf_relocate_section): Ditto.
(tilegx_copy_bits): New.
(tilegx_replace_insn): New.
(insn_mask_X1): New.
(insn_mask_X0_no_dest_no_srca): New.
(insn_mask_X1_no_dest_no_srca): New.
(insn_mask_Y0_no_dest_no_srca): New.
(insn_mask_Y1_no_dest_no_srca): New.
(insn_mask_X0_no_operand): New.
(insn_mask_X1_no_operand): New.
(insn_mask_Y0_no_operand): New.
(insn_mask_Y1_no_operand): New.
(insn_tls_ie_ld_X1): New.
(insn_tls_ie_ld4s_X1): New.
(insn_tls_ie_add_X0X1): New.
(insn_tls_ie_add_Y0Y1): New.
(insn_tls_ie_addx_X0X1): New.
(insn_tls_ie_addx_Y0Y1): New.
(insn_tls_gd_add_X0X1): New.
(insn_tls_gd_add_Y0Y1): New.
(insn_move_X0X1): New.
(insn_move_Y0Y1): New.
(insn_add_X0X1): New.
(insn_add_Y0Y1): New.
(insn_addx_X0X1): New.
(insn_addx_Y0Y1): New.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
gas/
* tc-tilepro.c (O_tls_le): Define operator.
(O_tls_le_lo16): Ditto.
(O_tls_le_hi16): Ditto.
(O_tls_le_ha16): Ditto.
(O_tls_gd_call): Ditto.
(O_tls_gd_add): Ditto.
(O_tls_ie_load): Ditto.
(md_begin): Delete old operators; handle new operators.
(emit_tilepro_instruction): Ditto.
(md_apply_fix): Ditto.
* tc-tilegx.c (O_hw1_got): Delete operator.
(O_hw2_got): Ditto.
(O_hw3_got): Ditto.
(O_hw2_last_got): Ditto.
(O_hw1_tls_gd): Ditto.
(O_hw2_tls_gd): Ditto.
(O_hw3_tls_gd): Ditto.
(O_hw2_last_tls_gd): Ditto.
(O_hw1_tls_ie): Ditto.
(O_hw2_tls_ie): Ditto.
(O_hw3_tls_ie): Ditto.
(O_hw2_last_tls_ie): Ditto.
(O_hw0_tls_le): Define operator.
(O_hw0_last_tls_le): Ditto.
(O_hw1_last_tls_le): Ditto.
(O_tls_gd_call): Ditto.
(O_tls_gd_add): Ditto.
(O_tls_ie_load): Ditto.
(O_tls_add): Ditto.
(md_begin): Delete old operators; handle new operators.
(emit_tilegx_instruction): Ditto.
(md_apply_fix): Ditto.
* doc/c-tilegx.texi: Delete old operators; document new operators.
* doc/c-tilepro.texi: Ditto.
include/elf/
* tilegx.h (R_TILEGX_IMM16_X0_HW1_GOT): Delete.
(R_TILEGX_IMM16_X1_HW1_GOT): Ditto.
(R_TILEGX_IMM16_X0_HW2_GOT): Ditto.
(R_TILEGX_IMM16_X1_HW2_GOT): Ditto.
(R_TILEGX_IMM16_X0_HW3_GOT): Ditto.
(R_TILEGX_IMM16_X1_HW3_GOT): Ditto.
(R_TILEGX_IMM16_X0_HW2_LAST_GOT): Ditto.
(R_TILEGX_IMM16_X1_HW2_LAST_GOT): Ditto.
(R_TILEGX_IMM16_X0_HW1_TLS_GD): Ditto.
(R_TILEGX_IMM16_X1_HW1_TLS_GD): Ditto.
(R_TILEGX_IMM16_X0_HW2_TLS_GD): Ditto.
(R_TILEGX_IMM16_X1_HW2_TLS_GD): Ditto.
(R_TILEGX_IMM16_X0_HW3_TLS_GD): Ditto.
(R_TILEGX_IMM16_X1_HW3_TLS_GD): Ditto.
(R_TILEGX_IMM16_X0_HW2_LAST_TLS_GD): Ditto.
(R_TILEGX_IMM16_X1_HW2_LAST_TLS_GD): Ditto.
(R_TILEGX_IMM16_X0_HW1_TLS_IE): Ditto.
(R_TILEGX_IMM16_X1_HW1_TLS_IE): Ditto.
(R_TILEGX_IMM16_X0_HW2_TLS_IE): Ditto.
(R_TILEGX_IMM16_X1_HW2_TLS_IE): Ditto.
(R_TILEGX_IMM16_X0_HW3_TLS_IE): Ditto.
(R_TILEGX_IMM16_X1_HW3_TLS_IE): Ditto.
(R_TILEGX_IMM16_X0_HW2_LAST_TLS_IE): Ditto.
(R_TILEGX_IMM16_X1_HW2_LAST_TLS_IE): Ditto.
(R_TILEGX_IMM16_X0_HW0_TLS_LE): New relocation.
(R_TILEGX_IMM16_X1_HW0_TLS_LE): Ditto.
(R_TILEGX_IMM16_X0_HW0_LAST_TLS_LE): Ditto.
(R_TILEGX_IMM16_X1_HW0_LAST_TLS_LE): Ditto.
(R_TILEGX_IMM16_X0_HW1_LAST_TLS_LE): Ditto.
(R_TILEGX_IMM16_X1_HW1_LAST_TLS_LE): Ditto.
(R_TILEGX_TLS_GD_CALL): Ditto.
(R_TILEGX_IMM8_X0_TLS_GD_ADD): Ditto.
(R_TILEGX_IMM8_X1_TLS_GD_ADD): Ditto.
(R_TILEGX_IMM8_Y0_TLS_GD_ADD): Ditto.
(R_TILEGX_IMM8_Y1_TLS_GD_ADD): Ditto.
(R_TILEGX_TLS_IE_LOAD): Ditto.
(R_TILEGX_IMM8_X0_TLS_ADD): Ditto.
(R_TILEGX_IMM8_X1_TLS_ADD): Ditto.
(R_TILEGX_IMM8_Y0_TLS_ADD): Ditto.
(R_TILEGX_IMM8_Y1_TLS_ADD): Ditto.
* tilepro.h (R_TILEPRO_TLS_GD_CALL): New relocation.
(R_TILEPRO_IMM8_X0_TLS_GD_ADD): Ditto.
(R_TILEPRO_IMM8_X1_TLS_GD_ADD): Ditto.
(R_TILEPRO_IMM8_Y0_TLS_GD_ADD): Ditto.
(R_TILEPRO_IMM8_Y1_TLS_GD_ADD): Ditto.
(R_TILEPRO_TLS_IE_LOAD): Ditto.
(R_TILEPRO_IMM16_X0_TLS_LE): Ditto.
(R_TILEPRO_IMM16_X1_TLS_LE): Ditto.
(R_TILEPRO_IMM16_X0_TLS_LE_LO): Ditto.
(R_TILEPRO_IMM16_X1_TLS_LE_LO): Ditto.
(R_TILEPRO_IMM16_X0_TLS_LE_HI): Ditto.
(R_TILEPRO_IMM16_X1_TLS_LE_HI): Ditto.
(R_TILEPRO_IMM16_X0_TLS_LE_HA): Ditto.
(R_TILEPRO_IMM16_X1_TLS_LE_HA): Ditto.
include/opcode/
* tilegx.h (tilegx_mnemonic): Add TILEGX_OPC_LD4S_TLS,
TILEGX_OPC_LD_TLS.
* tilepro.h (tilepro_mnemonic): Add TILEPRO_OPC_LW_TLS,
TILEPRO_OPC_LW_TLS_SN.
opcodes/
* tilegx-opc.c: Handle TILEGX_OPC_LD4S_TLS and TILEGX_OPC_LD_TLS.
* tilepro-opc.c: Handle TILEPRO_OPC_LW_TLS and
TILEPRO_OPC_LW_TLS_SN.
2012-02-25 22:24:21 +00:00
42164a7195
Implement Intel Transactional Synchronization Extensions
...
gas/
2012-02-08 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (HLE_PREFIX): New.
(check_hle): Likewise.
(_i386_insn): Add have_hle.
(cpu_arch): Add .hle and .rtm.
(md_assemble): Call check_hle if i.have_hle isn't zero.
(parse_insn): Set i.have_hle to 1 for HLE prefix.
(output_jump): Support up to 2 byte opcode.
* doc/c-i386.texi: Document hle/.hle and rtm/.rtm.
gas/testsuite/
2012-02-08 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/hle-intel.d: New.
* gas/i386/hle.d: Likewise.
* gas/i386/hle.s: Likewise.
* gas/i386/hlebad.l: Likewise.
* gas/i386/hlebad.s: Likewise.
* gas/i386/rtm-intel.d: Likewise.
* gas/i386/rtm.d: Likewise.
* gas/i386/rtm.s: Likewise.
* gas/i386/x86-64-hle-intel.d: Likewise.
* gas/i386/x86-64-hle.d: Likewise.
* gas/i386/x86-64-hle.s: Likewise.
* gas/i386/x86-64-hlebad.l: Likewise.
* gas/i386/x86-64-hlebad.s: Likewise.
* gas/i386/x86-64-rtm-intel.d: Likewise.
* gas/i386/x86-64-rtm.d: Likewise.
* gas/i386/x86-64-rtm.s: Likewise.
* gas/i386/i386.exp: Run hle, hle-intel, hlebad x86-64-hle, rtm,
rtm-intel, x86-64-hle-intel, x86-64-hlebad, x86-64-rtm and
x86-64-rtm-intel.
include/opcode/
2012-02-08 H.J. Lu <hongjiu.lu@intel.com>
* i386.h (XACQUIRE_PREFIX_OPCODE): New.
(XRELEASE_PREFIX_OPCODE): Likewise.
opcodes/
2012-02-08 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (HLE_Fixup1): New.
(HLE_Fixup2): Likewise.
(HLE_Fixup3): Likewise.
(Ebh1): Likewise.
(Evh1): Likewise.
(Ebh2): Likewise.
(Evh2): Likewise.
(Ebh3): Likewise.
(Evh3): Likewise.
(MOD_C6_REG_7): Likewise.
(MOD_C7_REG_7): Likewise.
(RM_C6_REG_7): Likewise.
(RM_C7_REG_7): Likewise.
(XACQUIRE_PREFIX): Likewise.
(XRELEASE_PREFIX): Likewise.
(dis386): Use Ebh1/Evh1 on add, adc, and, btc, btr, bts,
cmpxchg, dec, inc, neg, not, or, sbb, sub, xor and xadd. Use
Ebh2/Evh2 on xchg. Use Ebh3/Evh3 on mov.
(reg_table): Use Ebh1/Evh1 on add, adc, and, dec, inc, neg,
not, or, sbb, sub and xor. Use Ebh3/Evh3 on mov. Use
MOD_C6_REG_7 and MOD_C7_REG_7.
(mod_table): Add MOD_C6_REG_7 and MOD_C7_REG_7.
(rm_table): Add RM_C6_REG_7 and RM_C7_REG_7. Add xend and
xtest.
(prefix_name): Handle XACQUIRE_PREFIX and XRELEASE_PREFIX.
(CMPXCHG8B_Fixup): Handle HLE prefix on cmpxchg8b.
* i386-gen.c (cpu_flag_init): Add CPU_HLE_FLAGS and
CPU_RTM_FLAGS.
(cpu_flags): Add CpuHLE and CpuRTM.
(opcode_modifiers): Add HLEPrefixOk.
* i386-opc.h (CpuHLE): New.
(CpuRTM): Likewise.
(HLEPrefixOk): Likewise.
(i386_cpu_flags): Add cpuhle and cpurtm.
(i386_opcode_modifier): Add hleprefixok.
* i386-opc.tbl: Add HLEPrefixOk=3 to mov. Add HLEPrefixOk to
add, adc, and, btc, btr, bts, cmpxchg, dec, inc, neg, not, or,
sbb, sub, xor and xadd. Add HLEPrefixOk=2 to xchg with memory
operand. Add xacquire, xrelease, xabort, xbegin, xend and
xtest.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
2012-02-08 18:20:41 +00:00
432233b359
bfd:
...
2011-12-08 Andrew Pinski <apinski@cavium.com>
Adam Nemet <anemet@caviumnetworks.com>
* archures.c (bfd_mach_mips_octeon2): New macro
* bfd-in2.h: Regenerate.
* cpu-mips.c (I_mipsocteon2): New enum value.
(arch_info_struct): Add bfd_mach_mips_octeon2.
* elfxx-mips.c (_bfd_elf_mips_mach): Support E_MIPS_MACH_OCTEON2.
(mips_set_isa_flags): Add bfd_mach_mips_octeon2.
(mips_mach_extensions): Add bfd_mach_mips_octeon2.
gas:
2011-12-08 Andrew Pinski <apinski@cavium.com>
Adam Nemet <anemet@caviumnetworks.com>
* tc-mips.c (CPU_IS_OCTEON): Add Octeon2.
(mips_cpu_info_table): Add Octeon2.
* doc/c-mips.texi: Document octeon2 as an acceptable value for -march=.
gas/testsuite:
2011-12-08 Andrew Pinski <apinski@cavium.com>
Adam Nemet <anemet@caviumnetworks.com>
* gas/mips/mips.exp: Add Octeon2 for an architecture.
Run octeon2 test.
* gas/mips/octeon2.d: New file.
* gas/mips/octeon2.s: New file.
include/opcode:
2011-12-08 Andrew Pinski <apinski@cavium.com>
Adam Nemet <anemet@caviumnetworks.com>
* mips.h (INSN_CHIP_MASK): Update according to INSN_OCTEON2.
(INSN_OCTEON2): New macro.
(CPU_OCTEON2): New macro.
(OPCODE_IS_MEMBER): Add Octeon2.
opcodes:
2011-12-08 Andrew Pinski <apinski@cavium.com>
Adam Nemet <anemet@caviumnetworks.com>
* mips-dis.c (mips_arch_choices): Add Octeon2.
For "octeon+", just include OcteonP for the insn.
* mips-opc.c (IOCT): Include Octeon2.
(IOCTP): Include Octeon2.
(IOCT2): New macro.
(mips_builtin_opcodes): Add "laa", "laad", "lac", "lacd", "lad",
"ladd", "lai", "laid", "las", "lasd", "law", "lawd".
Move "lbux", "ldx", "lhx", "lwx", and "lwux" up to where the standard
loads are, and add IOCT2 to them.
Add "lbx" and "lhux".
Add "qmac.00", "qmac.01", "qmac.02", "qmac.03", "qmacs.00",
"qmacs.01", "qmacs.01", "qmacs.02" and "qmacs.03".
Add "zcb" and "zcbt".
2011-12-08 20:47:27 +00:00
dd6a37e700
opcode/
...
2011-11-29 Andrew Pinski <apinski@cavium.com>
* mips-dis.c (mips_arch_choices): Add Octeon+.
* mips-opc.c (IOCT): Include Octeon+.
(IOCTP): New macro.
(mips_builtin_opcodes): Add "saa" and "saad".
bfd/
2011-11-29 Andrew Pinski <apinski@cavium.com>
* archures.c (bfd_mach_mips_octeonp): New macro.
* bfd-in2.h: Regenerate.
* bfd/cpu-mips.c (I_mipsocteonp): New enum value.
(arch_info_struct): Add bfd_mach_mips_octeonp.
* elfxx-mips.c (mips_set_isa_flags): Add bfd_mach_mips_octeonp.
(mips_mach_extensions): Add bfd_mach_mips_octeonp.
include/opcodes/
2011-11-29 Andrew Pinski <apinski@cavium.com>
* mips.h (INSN_CHIP_MASK): Update according to INSN_OCTEONP.
(INSN_OCTEONP): New macro.
(CPU_OCTEONP): New macro.
(OPCODE_IS_MEMBER): Add Octeon+.
(M_SAA_AB, M_SAAD_AB, M_SAA_OB, M_SAAD_OB): New enum values.
gas/
2011-11-29 Andrew Pinski <apinski@cavium.com>
* config/tc-mips.c (CPU_IS_OCTEON): New macro function.
(CPU_HAS_SEQ): Change to use CPU_IS_OCTEON.
(NO_ISA_COP): Likewise.
(macro) <ld_st>: Add support when off0 is true.
Add support for M_SAA_AB, M_SAA_OB, M_SAAD_OB and M_SAAD_AB.
(mips_cpu_info_table): Add octeon+.
* doc/c-mips.texi: Document octeon+ as an acceptable value for -march=.
gas/testsuite/
2011-11-29 Andrew Pinski <apinski@cavium.com>
* gas/mips/mips.exp: Add octeon+ for an architecture.
Run octeon-saa-saad test.
(run_dump_test_arch): For Octeon architectures, also try octeon@.
* gas/mips/octeon-pref.d: Remove -march=octeon from command line.
* gas/mips/octeon.d: Likewise.
* gas/mips/octeon-saa-saad.d: New file.
* gas/mips/octeon-saa-saad.s: New file
2011-11-29 20:28:55 +00:00
99c513f6ac
[.]
...
* configure.ac (rl78-*-*) New case.
* configure: Regenerate.
[bfd]
* Makefile.am (ALL_MACHINES): Add cpu-rl78.lo.
(ALL_MACHINES_CFILES): Add cpu-rl78.c.
(BFD32_BACKENDS): Add elf32-rl78.lo.
(BFD32_BACKENDS_CFILES): Add elf32-rl78.c.
(Makefile.in): Regenerate.
* archures.c (bfd_architecture): Define bfd_arch_rl78.
(bfd_archures_list): Add bfd_rl78_arch.
* config.bfd: Add rl78-*-elf.
* configure.in: Add bfd_elf32_rl78_vec.
* reloc.c (bfd_reloc_code_type): Add BFD_RELOC_RL78_* relocations.
* targets.c (bfd_target_vector): Add bfd_elf32_rl78_vec.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* libbfd.h: Regenerate.
* cpu-rl78.c: New file.
* elf32-rl78.c: New file.
[binutils]
* readelf.c: Include elf/rl78.h
(guess_is_rela): Handle EM_RL78.
(dump_relocations): Likewise.
(get_machine_name): Likewise.
(is_32bit_abs_reloc): Likewise.
* NEWS: Mention addition of RL78 support.
* MAINTAINERS: Add myself as RL78 port maintainer.
[gas]
* Makefile.am (TARGET_CPU_CFILES): Add tc-rl78.c.
(TARGET_CPU_HFILES): Add rc-rl78.h.
(EXTRA_DIST): Add rl78-parse.c and rl78-parse.y.
(rl78-parse.c, rl78-parse.h, rl78-parse.o, rl78-defs.h): New rules.
* Makefile.in: Regenerate.
* configure.in: Add rl78 case.
* configure: Regenerate.
* configure.tgt: Add rl78 case.
* config/rl78-defs.h: New file.
* config/rl78-parse.y: New file.
* config/tc-rl78.c: New file.
* config/tc-rl78.h: New file.
* NEWS: Add Renesas RL78.
* doc/Makefile.am (c-rl78.texi): New.
* doc/Makefile.in: Likewise.
* doc/all.texi: Enable it.
* doc/as.texi: Add it.
[include]
* dis-asm.h (print_insn_rl78): Declare.
[include/elf]
* common.h (EM_RL78, EM_78K0R): New.
* rl78.h: New.
[include/opcode]
* rl78.h: New file.
[ld]
* Makefile.am (ALL_EMULATION_SOURCES): Add eelf32rl78.c.
(+eelf32rl78.c): New rule.
* Makefile.in: Regenerate.
* configure.tgt: Add rl78-*-* case.
* emulparams/elf32rl78.sh: New file.
* NEWS: Mention addition of Renesas RL78 support.
[opcodes]
* Makefile.am (TARGET_LIBOPCODES_CFILES): Add rl78-decode.c and
rl78-dis.c.
(MAINTAINERCLEANFILES): Add rl78-decode.c.
(rl78-decode.c): New rule, built from rl78-decode.opc and opc2c.
* Makefile.in: Regenerate.
* configure.in: Add bfd_rl78_arch case.
* configure: Regenerate.
* disassemble.c: Define ARCH_rl78.
(disassembler): Add ARCH_rl78 case.
* rl78-decode.c: New file.
* rl78-decode.opc: New file.
* rl78-dis.c: New file.
2011-11-02 03:09:11 +00:00
26f85d7a30
* mips.h: Fix a typo in description.
2011-10-24 14:21:41 +00:00
9e8c70f96b
Annotate sparc objects with cpu hardware capabilities used.
...
bfd/
* elfxx-sparc.c (_bfd_sparc_elf_merge_private_bfd_data): New.
* elfxx-sparc.h: Declare it.
* elf32-sparc.c (elf32_sparc_merge_private_bfd_data): Call it.
* elf64-sparc.c (elf64_sparc_merge_private_bfd_data): Likewise.
binutils/
* readelf.c (display_sparc_hwcaps): New.
(display_sparc_gnu_attribute): New.
(process_sparc_specific): New.
(process_arch_specific): When EM_SPARC, EM_SPARC32PLUS,
or EM_SPARCV9 invoke process_sparc_specific.
gas/
* config/tc-sparc.c (hwcap_seen): New bitmask, defined when
not TE_SOLARIS.
(sparc_ip): When not TE_SOLARIS, accumulate hwcap bits from
sparc_opcode->flags of instruction into hwcap_seen.
(sparc_md_end): Create Tag_GNU_Sparc_HWCAPS attribute if
hwcap_seen is non-zero and not TE_SOLARIS.
gas/testsuite/
* gas/sparc/hpcvis3.s: Update for fixed fchksum16 mnemonic.
* gas/sparc/hpcvis3.d: Likewise.
include/elf/
* sparc.h (Tag_GNU_Sparc_HWCAPS): New object attribute.
(ELF_SPARC_HWCAP_*): New HWCAPS bitmask values.
include/opcode/
* sparc.h (struct sparc_opcode): Expand 'flags' to unsigned int.
(F_MUL32, F_DIV32, F_FSMULD, F_V8PLUS, F_POPC, F_VIS, F_VIS2,
F_ASI_BLK_INIT, F_FMAF, F_VIS3, F_HPC, F_RANDOM, F_TRANS,
F_FJFMAU, F_IMA, F_ASI_CACHE_SPARING): New flag bits.
opcodes/
* sparc-opc.c (sparc_opcodes): Annotate table with HWCAP flag
bits. Fix "fchksm16" mnemonic.
2011-09-21 20:49:16 +00:00
dec0624dcd
gas/
...
* config/tc-mips.c (mips_set_options): Add ase_mcu.
(mips_opts): Initialise ase_mcu to -1.
(ISA_SUPPORTS_MCU_ASE): New macro.
(MIPS_CPU_ASE_MCU): Likewise.
(is_opcode_valid): Handle MCU.
(macro_build, macro): Likewise.
(validate_mips_insn, validate_micromips_insn): Likewise.
(mips_ip): Likewise.
(options): Add OPTION_MCU and OPTION_NO_MCU.
(md_longopts): Add mmcu and mno-mcu.
(md_parse_option): Handle OPTION_MCU and OPTION_NO_MCU.
(mips_after_parse_args): Handle MCU.
(s_mipsset): Likewise.
(md_show_usage): Handle MCU options.
* doc/as.texinfo: Document -mmcu and -mno-mcu options.
* doc/c-mips.texi: Likewise, and document ".set mcu" and
".set nomcu" directives.
gas/testsuite/
* gas/mips/micromips@mcu.d: New test.
* gas/mips/mcu.d: Likewise.
* gas/mips/mcu.s: New test source.
* gas/mips/mips.exp: Run the new tests.
include/opcode/
* mips.h (OP_MASK_3BITPOS, OP_SH_3BITPOS): New macros.
(OP_MASK_OFFSET12, OP_SH_OFFSET12): Redefine.
(INSN_ASE_MASK): Add the MCU bit.
(INSN_MCU): New macro.
(M_ACLR_AB, M_ACLR_OB, M_ASET_AB, M_ASET_OB): New enum values.
(MICROMIPSOP_MASK_3BITPOS, MICROMIPSOP_SH_3BITPOS): New macros.
opcodes/
* mips-dis.c (mips_arch_choices): Enable MCU for "mips32r2"
and "mips64r2".
(print_insn_args, print_insn_micromips): Handle MCU.
* micromips-opc.c (MC): New macro.
(micromips_opcodes): Add "aclr", "aset" and "iret".
* mips-opc.c (MC): New macro.
(mips_builtin_opcodes): Add "aclr", "aset" and "iret".
2011-08-09 15:20:03 +00:00
2b0c8b40ed
include/opcode/
...
* mips.h (INSN_WRITE_GPR_S, INSN2_WRITE_GPR_MB): New macros.
(INSN2_READ_GPR_MC, INSN2_READ_GPR_ME): Likewise.
(INSN2_WRITE_GPR_MF, INSN2_READ_GPR_MG): Likewise.
(INSN2_READ_GPR_MJ, INSN2_WRITE_GPR_MJ): Likewise.
(INSN2_READ_GPR_MP, INSN2_WRITE_GPR_MP): Likewise.
(INSN2_READ_GPR_MQ, INSN2_WRITE_GPR_MHI): Likewise.
(INSN2_READ_GPR_MMN): Likewise.
(INSN2_READ_FPR_D): Change the bit used.
(INSN2_MOD_GPR_MD, INSN2_MOD_GPR_MF): Likewise.
(INSN2_MOD_SP, INSN2_READ_GPR_31, INSN2_READ_GP): Likewise.
(INSN2_READ_PC, INSN2_UNCOND_BRANCH): Likewise.
(INSN2_COND_BRANCH): Likewise.
(INSN2_WRITE_GPR_S, INSN2_MOD_GPR_MB): Remove macros.
(INSN2_MOD_GPR_MC, INSN2_MOD_GPR_ME, INSN2_MOD_GPR_MG): Likewise.
(INSN2_MOD_GPR_MJ, INSN2_MOD_GPR_MP, INSN2_MOD_GPR_MQ): Likewise.
(INSN2_MOD_GPR_MHI, INSN2_MOD_GPR_MM): Likewise.
(INSN2_MOD_GPR_MN): Likewise.
gas/
* config/tc-mips.c (gpr_mod_mask): Remove INSN2_MOD_GPR_MB,
INSN2_MOD_GPR_MC, INSN2_MOD_GPR_ME, INSN2_MOD_GPR_MG,
INSN2_MOD_GPR_MHI, INSN2_MOD_GPR_MJ, INSN2_MOD_GPR_MM,
INSN2_MOD_GPR_MN, INSN2_MOD_GPR_MP and INSN2_MOD_GPR_MQ opcode
register use checks.
(gpr_read_mask): Add INSN2_READ_GPR_MC, INSN2_READ_GPR_ME
INSN2_READ_GPR_MG, INSN2_READ_GPR_MJ, INSN2_READ_GPR_MMN,
INSN2_READ_GPR_MP and INSN2_READ_GPR_MQ opcode register use
checks.
(gpr_write_mask): Replace INSN2_WRITE_GPR_S opcode register
use flag with INSN_WRITE_GPR_S. Add INSN2_WRITE_GPR_MB,
INSN2_WRITE_GPR_MHI, INSN2_WRITE_GPR_MJ and INSN2_WRITE_GPR_MP
opcode register use checks.
(can_swap_branch_p): Enable microMIPS branch swapping.
(append_insn): Likewise.
gas/testsuite/
* gas/mips/micromips.d: Update according to changes to enable
microMIPS branch swapping.
* gas/mips/micromips-trap.d: Likewise.
* gas/mips/micromips@jal-svr4pic.d: Likewise.
* gas/mips/micromips@loc-swap.d: Likewise.
* gas/mips/micromips@loc-swap-dis.d: Likewise.
opcodes/
* micromips-opc.c (MOD_mb, MOD_mc, MOD_md): Remove macros.
(MOD_me, MOD_mf, MOD_mg, MOD_mhi, MOD_mj, MOD_ml): Likewise.
(MOD_mm, MOD_mn, MOD_mp, MOD_mq, MOD_sp): Likewise.
(WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf): New macros.
(RD_mg, WR_mhi, RD_mj, WR_mj, RD_ml, RD_mmn): Likewise.
(RD_mp, WR_mp, RD_mq, RD_sp, WR_sp): Likewise.
(WR_s): Update macro.
(micromips_opcodes): Update register use flags of: "addiu",
"addiupc", "addiur1sp", "addiur2", "addius5", "addiusp", "addu",
"and", "andi", "beq", "beqz", "bne", "bnez", "di", "ei", "j",
"jalr", "jalrs", "jr", "jraddiusp", "jrc", "lbu", "lhu", "li",
"lui", "lw", "lwm", "mfhi", "mflo", "move", "movep", "not",
"nor", "or", "ori", "sb", "sh", "sll", "srl", "subu", "sw",
"swm" and "xor" instructions.
2011-08-09 14:25:29 +00:00
ea783ef3a0
include/opcode/
...
* sparc.h: Document new format codes '4', '5', and '('.
(OPF_LOW4, RS3): New macros.
opcodes/
* sparc-dis.c (v9a_ast_reg_names): Add "cps".
(X_RS3): New macro.
(print_insn_sparc): Handle '4', '5', and '(' format codes.
Accept %asr numbers below 28.
* sparc-opc.c (sparc_opcodes): Add entries for HPC and VIS3
instructions.
gas/
* config/tc-sparc.c (v9a_asr_table): Add "cps".
(sparc_ip): Handle '4', '5' and '(' format codes.
gas/testsuite
* gas/sparc/hpcvis3.d: New test.
* gas/sparc/hpcvis3.s: New test source.
* gas/sparc/sparc.exp: Run new test.
2011-08-05 16:52:50 +00:00
7c176fa823
* mips.h: Document the use of FP_D in MIPS16 mode. Adjust the
...
order of flags documented.
2011-08-03 21:09:46 +00:00
2309ddf222
bfd/
...
* elfxx-mips.c: Adjust comments throughout.
(mips_elf_relax_delete_bytes): Reshape code.
(_bfd_mips_elf_relax_section): Remove check for
R_MICROMIPS_GPREL16 relocations. Reshape code.
gas/
* config/tc-mips.c: Adjust comments throughout.
(reglist_lookup): Reshape code.
(jmp_reloc_p, jalr_reloc_p): Reformat.
(got16_reloc_p, hi16_reloc_p, lo16_reloc_p): Handle microMIPS
relocations.
(gpr_mod_mask): Remove unused variable.
(gpr_read_mask, gpr_write_mask): Reshape code.
(fpr_read_mask, fpr_write_mask): Likewise.
(nops_for_vr4130): Ensure non-microMIPS mode.
(can_swap_branch_p): Correct pinfo2 reference. Reshape code.
(append_insn): Skip Loongson 2F workaround in MIPS16 mode. Use
the outermost operator of a compound relocation to determines
the relocated field. Fix formatting.
(md_convert_frag): Reshape code.
include/opcode/
* mips.h: Clarify the description of microMIPS instruction
manipulation macros.
(MICROMIPSOP_MASK_MAJOR, MICROMIPSOP_SH_MAJOR): Remove macros.
2011-07-29 22:46:29 +00:00
df58fc944d
bfd/
...
2011-02-25 Chao-ying Fu <fu@mips.com>
Ilie Garbacea <ilie@mips.com>
Maciej W. Rozycki <macro@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
Catherine Moore <clm@codesourcery.com>
Richard Sandiford <rdsandiford@googlemail.com>
* archures.c (bfd_mach_mips_micromips): New macro.
* cpu-mips.c (I_micromips): New enum value.
(arch_info_struct): Add bfd_mach_mips_micromips.
* elfxx-mips.h (_bfd_mips_elf_is_target_special_symbol): New
prototype.
(_bfd_mips_elf_relax_section): Likewise.
(_bfd_mips16_elf_reloc_unshuffle): Rename to...
(_bfd_mips_elf_reloc_unshuffle): ... this. Handle microMIPS
ASE.
(_bfd_mips16_elf_reloc_shuffle): Rename to...
(_bfd_mips_elf_reloc_shuffle): ... this. Handle microMIPS ASE.
(gprel16_reloc_p): Handle microMIPS ASE.
(literal_reloc_p): New function.
* elf32-mips.c (elf_micromips_howto_table_rel): New variable.
(_bfd_mips_elf32_gprel16_reloc): Handle microMIPS ASE.
(mips16_gprel_reloc): Update for _bfd_mips_elf_reloc_unshuffle
and _bfd_mips_elf_reloc_shuffle changes.
(mips_elf_gprel32_reloc): Update comment.
(micromips_reloc_map): New variable.
(bfd_elf32_bfd_reloc_type_lookup): Handle microMIPS ASE.
(mips_elf32_rtype_to_howto): Likewise.
(mips_info_to_howto_rel): Likewise.
(bfd_elf32_bfd_is_target_special_symbol): Define.
(bfd_elf32_bfd_relax_section): Likewise.
* elf64-mips.c (micromips_elf64_howto_table_rel): New variable.
(micromips_elf64_howto_table_rela): Likewise.
(mips16_gprel_reloc): Update for _bfd_mips_elf_reloc_unshuffle
and _bfd_mips_elf_reloc_shuffle changes.
(micromips_reloc_map): Likewise.
(bfd_elf64_bfd_reloc_type_lookup): Handle microMIPS ASE.
(bfd_elf64_bfd_reloc_name_lookup): Likewise.
(mips_elf64_rtype_to_howto): Likewise.
(bfd_elf64_bfd_is_target_special_symbol): Define.
* elfn32-mips.c (elf_micromips_howto_table_rel): New variable.
(elf_micromips_howto_table_rela): Likewise.
(mips16_gprel_reloc): Update for _bfd_mips_elf_reloc_unshuffle
and _bfd_mips_elf_reloc_shuffle changes.
(micromips_reloc_map): Likewise.
(bfd_elf32_bfd_reloc_type_lookup): Handle microMIPS ASE.
(bfd_elf32_bfd_reloc_name_lookup): Likewise.
(mips_elf_n32_rtype_to_howto): Likewise.
(bfd_elf32_bfd_is_target_special_symbol): Define.
* elfxx-mips.c (LA25_LUI_MICROMIPS_1): New macro.
(LA25_LUI_MICROMIPS_2): Likewise.
(LA25_J_MICROMIPS_1, LA25_J_MICROMIPS_2): Likewise.
(LA25_ADDIU_MICROMIPS_1, LA25_ADDIU_MICROMIPS_2): Likewise.
(TLS_RELOC_P): Handle microMIPS ASE.
(mips_elf_create_stub_symbol): Adjust value of stub symbol if
target is a microMIPS function.
(micromips_reloc_p): New function.
(micromips_reloc_shuffle_p): Likewise.
(got16_reloc_p, call16_reloc_p): Handle microMIPS ASE.
(got_disp_reloc_p, got_page_reloc_p): New functions.
(got_ofst_reloc_p): Likewise.
(got_hi16_reloc_p, got_lo16_reloc_p): Likewise.
(call_hi16_reloc_p, call_lo16_reloc_p): Likewise.
(hi16_reloc_p, lo16_reloc_p, jal_reloc_p): Handle microMIPS ASE.
(micromips_branch_reloc_p): New function.
(tls_gd_reloc_p, tls_ldm_reloc_p): Likewise.
(tls_gottprel_reloc_p): Likewise.
(_bfd_mips16_elf_reloc_unshuffle): Rename to...
(_bfd_mips_elf_reloc_unshuffle): ... this. Handle microMIPS
ASE.
(_bfd_mips16_elf_reloc_shuffle): Rename to...
(_bfd_mips_elf_reloc_shuffle): ... this. Handle microMIPS ASE.
(_bfd_mips_elf_lo16_reloc): Handle microMIPS ASE.
(mips_tls_got_index, mips_elf_got_page): Likewise.
(mips_elf_create_local_got_entry): Likewise.
(mips_elf_relocation_needs_la25_stub): Likewise.
(mips_elf_calculate_relocation): Likewise.
(mips_elf_perform_relocation): Likewise.
(_bfd_mips_elf_symbol_processing): Likewise.
(_bfd_mips_elf_add_symbol_hook): Likewise.
(_bfd_mips_elf_link_output_symbol_hook): Likewise.
(mips_elf_add_lo16_rel_addend): Likewise.
(_bfd_mips_elf_check_relocs): Likewise.
(mips_elf_adjust_addend): Likewise.
(_bfd_mips_elf_relocate_section): Likewise.
(mips_elf_create_la25_stub): Likewise.
(_bfd_mips_vxworks_finish_dynamic_symbol): Likewise.
(_bfd_mips_elf_gc_sweep_hook): Likewise.
(_bfd_mips_elf_is_target_special_symbol): New function.
(mips_elf_relax_delete_bytes): Likewise.
(opcode_descriptor): New structure.
(RA): New macro.
(OP32_SREG, OP32_TREG, OP16_VALID_REG): Likewise.
(b_insns_32, bc_insn_32, bz_insn_32, bzal_insn_32): New variables.
(beq_insn_32): Likewise.
(b_insn_16, bz_insn_16): New variables.
(BZC32_REG_FIELD): New macro.
(bz_rs_insns_32, bz_rt_insns_32): New variables.
(bzc_insns_32, bz_insns_16):Likewise.
(BZ16_REG, BZ16_REG_FIELD): New macros.
(jal_insn_32_bd16, jal_insn_32_bd32): New variables.
(jal_x_insn_32_bd32): Likewise.
(j_insn_32, jalr_insn_32): Likewise.
(ds_insns_32_bd16, ds_insns_32_bd32): Likewise.
(jalr_insn_16_bd16, jalr_insn_16_bd32, jr_insn_16): Likewise.
(JR16_REG): New macro.
(ds_insns_16_bd16): New variable.
(lui_insn): Likewise.
(addiu_insn, addiupc_insn): Likewise.
(ADDIUPC_REG_FIELD): New macro.
(MOVE32_RD, MOVE32_RS): Likewise.
(MOVE16_RD_FIELD, MOVE16_RS_FIELD): Likewise.
(move_insns_32, move_insns_16): New variables.
(nop_insn_32, nop_insn_16): Likewise.
(MATCH): New macro.
(find_match): New function.
(check_br16_dslot, check_br32_dslot): Likewise.
(check_br16, check_br32): Likewise.
(IS_BITSIZE): New macro.
(check_4byte_branch): New function.
(_bfd_mips_elf_relax_section): Likewise.
(_bfd_mips_elf_merge_private_bfd_data): Disallow linking MIPS16
and microMIPS modules together.
(_bfd_mips_elf_print_private_bfd_data): Handle microMIPS ASE.
* reloc.c (BFD_RELOC_MICROMIPS_7_PCREL_S1): New relocation.
(BFD_RELOC_MICROMIPS_10_PCREL_S1): Likewise.
(BFD_RELOC_MICROMIPS_16_PCREL_S1): Likewise.
(BFD_RELOC_MICROMIPS_GPREL16): Likewise.
(BFD_RELOC_MICROMIPS_JMP, BFD_RELOC_MICROMIPS_HI16): Likewise.
(BFD_RELOC_MICROMIPS_HI16_S): Likewise.
(BFD_RELOC_MICROMIPS_LO16): Likewise.
(BFD_RELOC_MICROMIPS_LITERAL): Likewise.
(BFD_RELOC_MICROMIPS_GOT16): Likewise.
(BFD_RELOC_MICROMIPS_CALL16): Likewise.
(BFD_RELOC_MICROMIPS_GOT_HI16): Likewise.
(BFD_RELOC_MICROMIPS_GOT_LO16): Likewise.
(BFD_RELOC_MICROMIPS_CALL_HI16): Likewise.
(BFD_RELOC_MICROMIPS_CALL_LO16): Likewise.
(BFD_RELOC_MICROMIPS_SUB): Likewise.
(BFD_RELOC_MICROMIPS_GOT_PAGE): Likewise.
(BFD_RELOC_MICROMIPS_GOT_OFST): Likewise.
(BFD_RELOC_MICROMIPS_GOT_DISP): Likewise.
(BFD_RELOC_MICROMIPS_HIGHEST): Likewise.
(BFD_RELOC_MICROMIPS_HIGHER): Likewise.
(BFD_RELOC_MICROMIPS_SCN_DISP): Likewise.
(BFD_RELOC_MICROMIPS_JALR): Likewise.
(BFD_RELOC_MICROMIPS_TLS_GD): Likewise.
(BFD_RELOC_MICROMIPS_TLS_LDM): Likewise.
(BFD_RELOC_MICROMIPS_TLS_DTPREL_HI16): Likewise.
(BFD_RELOC_MICROMIPS_TLS_DTPREL_LO16): Likewise.
(BFD_RELOC_MICROMIPS_TLS_GOTTPREL): Likewise.
(BFD_RELOC_MICROMIPS_TLS_TPREL_HI16): Likewise.
(BFD_RELOC_MICROMIPS_TLS_TPREL_LO16): Likewise.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
binutils/
2011-02-25 Chao-ying Fu <fu@mips.com>
Maciej W. Rozycki <macro@codesourcery.com>
* readelf.c (get_machine_flags): Handle microMIPS ASE.
(get_mips_symbol_other): Likewise.
gas/
2011-02-25 Maciej W. Rozycki <macro@codesourcery.com>
Chao-ying Fu <fu@mips.com>
Richard Sandiford <rdsandiford@googlemail.com>
* config/tc-mips.h (mips_segment_info): Add one bit for
microMIPS.
(TC_LABEL_IS_LOCAL): New macro.
(mips_label_is_local): New prototype.
* config/tc-mips.c (S0, S7): New macros.
(emit_branch_likely_macro): New variable.
(mips_set_options): Add micromips.
(mips_opts): Initialise micromips to -1.
(file_ase_micromips): New variable.
(CPU_HAS_MICROMIPS): New macro.
(hilo_interlocks): Set for microMIPS too.
(gpr_interlocks): Likewise.
(cop_interlocks): Likewise.
(cop_mem_interlocks): Likewise.
(HAVE_CODE_COMPRESSION): New macro.
(micromips_op_hash): New variable.
(micromips_nop16_insn, micromips_nop32_insn): New variables.
(NOP_INSN): Handle microMIPS ASE.
(mips32_to_micromips_reg_b_map): New macro.
(mips32_to_micromips_reg_c_map): Likewise.
(mips32_to_micromips_reg_d_map): Likewise.
(mips32_to_micromips_reg_e_map): Likewise.
(mips32_to_micromips_reg_f_map): Likewise.
(mips32_to_micromips_reg_g_map): Likewise.
(mips32_to_micromips_reg_l_map): Likewise.
(mips32_to_micromips_reg_n_map): Likewise.
(mips32_to_micromips_reg_h_map): New variable.
(mips32_to_micromips_reg_m_map): Likewise.
(mips32_to_micromips_reg_q_map): Likewise.
(micromips_to_32_reg_h_map): New variable.
(micromips_to_32_reg_i_map): Likewise.
(micromips_to_32_reg_m_map): Likewise.
(micromips_to_32_reg_q_map): Likewise.
(micromips_to_32_reg_b_map): New macro.
(micromips_to_32_reg_c_map): Likewise.
(micromips_to_32_reg_d_map): Likewise.
(micromips_to_32_reg_e_map): Likewise.
(micromips_to_32_reg_f_map): Likewise.
(micromips_to_32_reg_g_map): Likewise.
(micromips_to_32_reg_l_map): Likewise.
(micromips_to_32_reg_n_map): Likewise.
(micromips_imm_b_map, micromips_imm_c_map): New macros.
(RELAX_DELAY_SLOT_16BIT): New macro.
(RELAX_DELAY_SLOT_SIZE_FIRST): Likewise.
(RELAX_DELAY_SLOT_SIZE_SECOND): Likewise.
(RELAX_MICROMIPS_ENCODE, RELAX_MICROMIPS_P): New macros.
(RELAX_MICROMIPS_TYPE, RELAX_MICROMIPS_AT): Likewise.
(RELAX_MICROMIPS_U16BIT, RELAX_MICROMIPS_UNCOND): Likewise.
(RELAX_MICROMIPS_COMPACT, RELAX_MICROMIPS_LINK): Likewise.
(RELAX_MICROMIPS_RELAX32, RELAX_MICROMIPS_TOOFAR16): Likewise.
(RELAX_MICROMIPS_MARK_TOOFAR16): Likewise.
(RELAX_MICROMIPS_CLEAR_TOOFAR16): Likewise.
(RELAX_MICROMIPS_TOOFAR32): Likewise.
(RELAX_MICROMIPS_MARK_TOOFAR32): Likewise.
(RELAX_MICROMIPS_CLEAR_TOOFAR32): Likewise.
(INSERT_OPERAND, EXTRACT_OPERAND): Handle microMIPS ASE.
(mips_macro_warning): Add delay_slot_16bit_p, delay_slot_32bit_p,
fsize and insns.
(mips_mark_labels): New function.
(mips16_small, mips16_ext): Remove variables, replacing with...
(forced_insn_size): ... this.
(append_insn, mips16_ip): Update accordingly.
(micromips_insn_length): New function.
(insn_length): Return the length of microMIPS instructions.
(mips_record_mips16_mode): Rename to...
(mips_record_compressed_mode): ... this. Handle microMIPS ASE.
(install_insn): Handle microMIPS ASE.
(reglist_lookup): New function.
(is_size_valid, is_delay_slot_valid): Likewise.
(md_begin): Handle microMIPS ASE.
(md_assemble): Likewise. Update for append_insn interface change.
(micromips_reloc_p): New function.
(got16_reloc_p): Handle microMIPS ASE.
(hi16_reloc_p): Likewise.
(lo16_reloc_p): Likewise.
(jmp_reloc_p): New function.
(jalr_reloc_p): Likewise.
(matching_lo_reloc): Handle microMIPS ASE.
(insn_uses_reg, reg_needs_delay): Likewise.
(mips_move_labels): Likewise.
(mips16_mark_labels): Rename to...
(mips_compressed_mark_labels): ... this. Handle microMIPS ASE.
(gpr_mod_mask): New function.
(gpr_read_mask, gpr_write_mask): Handle microMIPS ASE.
(fpr_read_mask, fpr_write_mask): Likewise.
(insns_between, nops_for_vr4130, nops_for_insn): Likewise.
(fix_loongson2f_nop, fix_loongson2f_jump): Likewise.
(MICROMIPS_LABEL_CHAR): New macro.
(micromips_target_label, micromips_target_name): New variables.
(micromips_label_name, micromips_label_expr): New functions.
(micromips_label_inc, micromips_add_label): Likewise.
(mips_label_is_local): Likewise.
(micromips_map_reloc): Likewise.
(can_swap_branch_p): Handle microMIPS ASE.
(append_insn): Add expansionp argument. Handle microMIPS ASE.
(start_noreorder, end_noreorder): Handle microMIPS ASE.
(macro_start, macro_warning, macro_end): Likewise.
(brk_fmt, cop12_fmt, jalr_fmt, lui_fmt): New variables.
(mem12_fmt, mfhl_fmt, shft_fmt, trap_fmt): Likewise.
(BRK_FMT, COP12_FMT, JALR_FMT, LUI_FMT): New macros.
(MEM12_FMT, MFHL_FMT, SHFT_FMT, TRAP_FMT): Likewise.
(macro_build): Handle microMIPS ASE. Update for append_insn
interface change.
(mips16_macro_build): Update for append_insn interface change.
(macro_build_jalr): Handle microMIPS ASE.
(macro_build_lui): Likewise. Simplify.
(load_register): Handle microMIPS ASE.
(load_address): Likewise.
(move_register): Likewise.
(macro_build_branch_likely): New function.
(macro_build_branch_ccl): Likewise.
(macro_build_branch_rs): Likewise.
(macro_build_branch_rsrt): Likewise.
(macro): Handle microMIPS ASE.
(validate_micromips_insn): New function.
(expr_const_in_range): Likewise.
(mips_ip): Handle microMIPS ASE.
(options): Add OPTION_MICROMIPS and OPTION_NO_MICROMIPS.
(md_longopts): Add mmicromips and mno-micromips.
(md_parse_option): Handle OPTION_MICROMIPS and
OPTION_NO_MICROMIPS.
(mips_after_parse_args): Handle microMIPS ASE.
(md_pcrel_from): Handle microMIPS relocations.
(mips_force_relocation): Likewise.
(md_apply_fix): Likewise.
(mips_align): Handle microMIPS ASE.
(s_mipsset): Likewise.
(s_cpload, s_cpsetup, s_cpreturn): Use relocation wrappers.
(s_dtprel_internal): Likewise.
(s_gpword, s_gpdword): Likewise.
(s_insn): Handle microMIPS ASE.
(s_mips_stab): Likewise.
(relaxed_micromips_32bit_branch_length): New function.
(relaxed_micromips_16bit_branch_length): New function.
(md_estimate_size_before_relax): Handle microMIPS ASE.
(mips_fix_adjustable): Likewise.
(tc_gen_reloc): Handle microMIPS relocations.
(mips_relax_frag): Handle microMIPS ASE.
(md_convert_frag): Likewise.
(mips_frob_file_after_relocs): Likewise.
(mips_elf_final_processing): Likewise.
(mips_nop_opcode): Likewise.
(mips_handle_align): Likewise.
(md_show_usage): Handle microMIPS options.
* symbols.c (TC_LABEL_IS_LOCAL): New macro.
(S_IS_LOCAL): Add a TC_LABEL_IS_LOCAL check.
* doc/as.texinfo (Target MIPS options): Add -mmicromips and
-mno-micromips.
(-mmicromips, -mno-micromips): New options.
* doc/c-mips.texi (-mmicromips, -mno-micromips): New options.
(MIPS ISA): Document .set micromips and .set nomicromips.
(MIPS insn): Update for microMIPS support.
gas/testsuite/
2011-02-25 Maciej W. Rozycki <macro@codesourcery.com>
Chao-ying Fu <fu@mips.com>
Richard Sandiford <rdsandiford@googlemail.com>
* gas/mips/micromips.d: New test.
* gas/mips/micromips-branch-delay.d: Likewise.
* gas/mips/micromips-branch-relax.d: Likewise.
* gas/mips/micromips-branch-relax-pic.d: Likewise.
* gas/mips/micromips-size-1.d: Likewise.
* gas/mips/micromips-trap.d: Likewise.
* gas/mips/micromips.l: New stderr output.
* gas/mips/micromips-branch-delay.l: Likewise.
* gas/mips/micromips-branch-relax.l: Likewise.
* gas/mips/micromips-branch-relax-pic.l: Likewise.
* gas/mips/micromips-size-0.l: New list test.
* gas/mips/micromips-size-1.l: New stderr output.
* gas/mips/micromips.s: New test source.
* gas/mips/micromips-branch-delay.s: Likewise.
* gas/mips/micromips-branch-relax.s: Likewise.
* gas/mips/micromips-size-0.s: Likewise.
* gas/mips/micromips-size-1.s: Likewise.
* gas/mips/mips.exp: Run the new tests.
* gas/mips/dli.s: Use .p2align.
* gas/mips/elf_ase_micromips.d: New test.
* gas/mips/elf_ase_micromips-2.d: Likewise.
* gas/mips/micromips@abs.d: Likewise.
* gas/mips/micromips@add.d: Likewise.
* gas/mips/micromips@alnv_ps-swap.d: Likewise.
* gas/mips/micromips@and.d: Likewise.
* gas/mips/micromips@beq.d: Likewise.
* gas/mips/micromips@bge.d: Likewise.
* gas/mips/micromips@bgeu.d: Likewise.
* gas/mips/micromips@blt.d: Likewise.
* gas/mips/micromips@bltu.d: Likewise.
* gas/mips/micromips@branch-likely.d: Likewise.
* gas/mips/micromips@branch-misc-1.d: Likewise.
* gas/mips/micromips@branch-misc-2-64.d: Likewise.
* gas/mips/micromips@branch-misc-2.d: Likewise.
* gas/mips/micromips@branch-misc-2pic-64.d: Likewise.
* gas/mips/micromips@branch-misc-2pic.d: Likewise.
* gas/mips/micromips@branch-misc-4-64.d: Likewise.
* gas/mips/micromips@branch-misc-4.d: Likewise.
* gas/mips/micromips@branch-self.d: Likewise.
* gas/mips/micromips@cache.d: Likewise.
* gas/mips/micromips@daddi.d: Likewise.
* gas/mips/micromips@dli.d: Likewise.
* gas/mips/micromips@elf-jal.d: Likewise.
* gas/mips/micromips@elf-rel2.d: Likewise.
* gas/mips/micromips@elfel-rel2.d: Likewise.
* gas/mips/micromips@elf-rel4.d: Likewise.
* gas/mips/micromips@jal-svr4pic.d: Likewise.
* gas/mips/micromips@jal-svr4pic-noreorder.d: Likewise.
* gas/mips/micromips@lb-svr4pic-ilocks.d: Likewise.
* gas/mips/micromips@li.d: Likewise.
* gas/mips/micromips@loc-swap-dis.d: Likewise.
* gas/mips/micromips@loc-swap.d: Likewise.
* gas/mips/micromips@mips1-fp.d: Likewise.
* gas/mips/micromips@mips32-cp2.d: Likewise.
* gas/mips/micromips@mips32-imm.d: Likewise.
* gas/mips/micromips@mips32-sf32.d: Likewise.
* gas/mips/micromips@mips32.d: Likewise.
* gas/mips/micromips@mips32r2-cp2.d: Likewise.
* gas/mips/micromips@mips32r2-fp32.d: Likewise.
* gas/mips/micromips@mips32r2-sync.d: Likewise.
* gas/mips/micromips@mips32r2.d: Likewise.
* gas/mips/micromips@mips4-branch-likely.d: Likewise.
* gas/mips/micromips@mips4-fp.d: Likewise.
* gas/mips/micromips@mips4.d: Likewise.
* gas/mips/micromips@mips5.d: Likewise.
* gas/mips/micromips@mips64-cp2.d: Likewise.
* gas/mips/micromips@mips64.d: Likewise.
* gas/mips/micromips@mips64r2.d: Likewise.
* gas/mips/micromips@pref.d: Likewise.
* gas/mips/micromips@relax-at.d: Likewise.
* gas/mips/micromips@relax.d: Likewise.
* gas/mips/micromips@rol-hw.d: Likewise.
* gas/mips/micromips@uld2-eb.d: Likewise.
* gas/mips/micromips@uld2-el.d: Likewise.
* gas/mips/micromips@ulh2-eb.d: Likewise.
* gas/mips/micromips@ulh2-el.d: Likewise.
* gas/mips/micromips@ulw2-eb-ilocks.d: Likewise.
* gas/mips/micromips@ulw2-el-ilocks.d: Likewise.
* gas/mips/cache.d: Likewise.
* gas/mips/daddi.d: Likewise.
* gas/mips/mips32-imm.d: Likewise.
* gas/mips/pref.d: Likewise.
* gas/mips/elf-rel27.d: Handle microMIPS ASE.
* gas/mips/l_d.d: Likewise.
* gas/mips/l_d-n32.d: Likewise.
* gas/mips/l_d-n64.d: Likewise.
* gas/mips/ld.d: Likewise.
* gas/mips/ld-n32.d: Likewise.
* gas/mips/ld-n64.d: Likewise.
* gas/mips/s_d.d: Likewise.
* gas/mips/s_d-n32.d: Likewise.
* gas/mips/s_d-n64.d: Likewise.
* gas/mips/sd.d: Likewise.
* gas/mips/sd-n32.d: Likewise.
* gas/mips/sd-n64.d: Likewise.
* gas/mips/mips32.d: Update immediates.
* gas/mips/micromips@mips32-cp2.s: New test source.
* gas/mips/micromips@mips32-imm.s: Likewise.
* gas/mips/micromips@mips32r2-cp2.s: Likewise.
* gas/mips/micromips@mips64-cp2.s: Likewise.
* gas/mips/cache.s: Likewise.
* gas/mips/daddi.s: Likewise.
* gas/mips/mips32-imm.s: Likewise.
* gas/mips/elf-rel4.s: Handle microMIPS ASE.
* gas/mips/lb-pic.s: Likewise.
* gas/mips/ld.s: Likewise.
* gas/mips/mips32.s: Likewise.
* gas/mips/mips.exp: Add the micromips arch. Exclude mips16e
from micromips. Run mips32-imm.
* gas/mips/jal-mask-11.d: New test.
* gas/mips/jal-mask-12.d: Likewise.
* gas/mips/micromips@jal-mask-11.d: Likewise.
* gas/mips/jal-mask-1.s: Source for the new tests.
* gas/mips/jal-mask-21.d: New test.
* gas/mips/jal-mask-22.d: Likewise.
* gas/mips/micromips@jal-mask-12.d: Likewise.
* gas/mips/jal-mask-2.s: Source for the new tests.
* gas/mips/mips.exp: Run the new tests.
* gas/mips/mips16-e.d: Add --special-syms to `objdump'.
* gas/mips/tmips16-e.d: Likewise.
* gas/mips/mipsel16-e.d: Likewise.
* gas/mips/tmipsel16-e.d: Likewise.
* gas/mips/and.s: Adjust padding.
* gas/mips/beq.s: Likewise.
* gas/mips/bge.s: Likewise.
* gas/mips/bgeu.s: Likewise.
* gas/mips/blt.s: Likewise.
* gas/mips/bltu.s: Likewise.
* gas/mips/branch-misc-2.s: Likewise.
* gas/mips/jal.s: Likewise.
* gas/mips/li.s: Likewise.
* gas/mips/mips4.s: Likewise.
* gas/mips/mips4-fp.s: Likewise.
* gas/mips/relax.s: Likewise.
* gas/mips/and.d: Update accordingly.
* gas/mips/elf-jal.d: Likewise.
* gas/mips/jal.d: Likewise.
* gas/mips/li.d: Likewise.
* gas/mips/relax-at.d: Likewise.
* gas/mips/relax.d: Likewise.
include/elf/
2011-02-25 Chao-ying Fu <fu@mips.com>
Maciej W. Rozycki <macro@codesourcery.com>
* mips.h (R_MICROMIPS_min): New relocations.
(R_MICROMIPS_26_S1): Likewise.
(R_MICROMIPS_HI16, R_MICROMIPS_LO16): Likewise.
(R_MICROMIPS_GPREL16, R_MICROMIPS_LITERAL): Likewise.
(R_MICROMIPS_GOT16, R_MICROMIPS_PC7_S1): Likewise.
(R_MICROMIPS_PC10_S1, R_MICROMIPS_PC16_S1): Likewise.
(R_MICROMIPS_CALL16, R_MICROMIPS_GOT_DISP): Likewise.
(R_MICROMIPS_GOT_PAGE, R_MICROMIPS_GOT_OFST): Likewise.
(R_MICROMIPS_GOT_HI16, R_MICROMIPS_GOT_LO16): Likewise.
(R_MICROMIPS_SUB, R_MICROMIPS_HIGHER): Likewise.
(R_MICROMIPS_HIGHEST, R_MICROMIPS_CALL_HI16): Likewise.
(R_MICROMIPS_CALL_LO16, R_MICROMIPS_SCN_DISP): Likewise.
(R_MICROMIPS_JALR, R_MICROMIPS_HI0_LO16): Likewise.
(R_MICROMIPS_TLS_GD, R_MICROMIPS_TLS_LDM): Likewise.
(R_MICROMIPS_TLS_DTPREL_HI, R_MICROMIPS_TLS_DTPREL_LO): Likewise.
(R_MICROMIPS_TLS_GOTTPREL): Likewise.
(R_MICROMIPS_TLS_TPREL_HI16): Likewise.
(R_MICROMIPS_TLS_TPREL_LO16): Likewise.
(R_MICROMIPS_GPREL7_S2, R_MICROMIPS_PC23_S2): Likewise.
(R_MICROMIPS_max): Likewise.
(EF_MIPS_ARCH_ASE_MICROMIPS): New macro.
(STO_MIPS_ISA, STO_MIPS_FLAGS): Likewise.
(ELF_ST_IS_MIPS_PLT, ELF_ST_SET_MIPS_PLT): Likewise.
(STO_MICROMIPS): Likewise.
(ELF_ST_IS_MICROMIPS, ELF_ST_SET_MICROMIPS): Likewise.
(ELF_ST_IS_COMPRESSED): Likewise.
(STO_MIPS_PLT, STO_MIPS_PIC): Rework.
(ELF_ST_IS_MIPS_PIC, ELF_ST_SET_MIPS_PIC): Likewise.
(STO_MIPS16, ELF_ST_IS_MIPS16, ELF_ST_SET_MIPS16): Likewise.
include/opcode/
2011-02-25 Chao-ying Fu <fu@mips.com>
Maciej W. Rozycki <macro@codesourcery.com>
* mips.h (OP_MASK_EXTLSB, OP_SH_EXTLSB): New macros.
(OP_MASK_STYPE, OP_SH_STYPE): Likewise.
(OP_MASK_CODE10, OP_SH_CODE10): Likewise.
(OP_MASK_TRAP, OP_SH_TRAP): Likewise.
(OP_MASK_OFFSET12, OP_SH_OFFSET12): Likewise.
(OP_MASK_OFFSET10, OP_SH_OFFSET10): Likewise.
(OP_MASK_RS3, OP_SH_RS3): Likewise.
(OP_MASK_MB, OP_SH_MB, OP_MASK_MC, OP_SH_MC): Likewise.
(OP_MASK_MD, OP_SH_MD, OP_MASK_ME, OP_SH_ME): Likewise.
(OP_MASK_MF, OP_SH_MF, OP_MASK_MG, OP_SH_MG): Likewise.
(OP_MASK_MJ, OP_SH_MJ, OP_MASK_ML, OP_SH_ML): Likewise.
(OP_MASK_MP, OP_SH_MP, OP_MASK_MQ, OP_SH_MQ): Likewise.
(OP_MASK_IMMA, OP_SH_IMMA, OP_MASK_IMMB, OP_SH_IMMB): Likewise.
(OP_MASK_IMMC, OP_SH_IMMC, OP_MASK_IMMF, OP_SH_IMMF): Likewise.
(OP_MASK_IMMG, OP_SH_IMMG, OP_MASK_IMMH, OP_SH_IMMH): Likewise.
(OP_MASK_IMMI, OP_SH_IMMI, OP_MASK_IMMJ, OP_SH_IMMJ): Likewise.
(OP_MASK_IMML, OP_SH_IMML, OP_MASK_IMMM, OP_SH_IMMM): Likewise.
(OP_MASK_IMMN, OP_SH_IMMN, OP_MASK_IMMO, OP_SH_IMMO): Likewise.
(OP_MASK_IMMP, OP_SH_IMMP, OP_MASK_IMMQ, OP_SH_IMMQ): Likewise.
(OP_MASK_IMMU, OP_SH_IMMU, OP_MASK_IMMW, OP_SH_IMMW): Likewise.
(OP_MASK_IMMX, OP_SH_IMMX, OP_MASK_IMMY, OP_SH_IMMY): Likewise.
(INSN_WRITE_GPR_S): New macro.
(INSN2_BRANCH_DELAY_16BIT, INSN2_BRANCH_DELAY_32BIT): Likewise.
(INSN2_READ_FPR_D): Likewise.
(INSN2_MOD_GPR_MB, INSN2_MOD_GPR_MC): Likewise.
(INSN2_MOD_GPR_MD, INSN2_MOD_GPR_ME): Likewise.
(INSN2_MOD_GPR_MF, INSN2_MOD_GPR_MG): Likewise.
(INSN2_MOD_GPR_MJ, INSN2_MOD_GPR_MP): Likewise.
(INSN2_MOD_GPR_MQ, INSN2_MOD_SP): Likewise.
(INSN2_READ_GPR_31, INSN2_READ_GP, INSN2_READ_PC): Likewise.
(INSN2_UNCOND_BRANCH, INSN2_COND_BRANCH): Likewise.
(INSN2_MOD_GPR_MHI, INSN2_MOD_GPR_MM, INSN2_MOD_GPR_MN): Likewise.
(CPU_MICROMIPS): New macro.
(M_BC1FL, M_BC1TL, M_BC2FL, M_BC2TL): New enum values.
(M_BEQL, M_BGEZ, M_BGEZL, M_BGEZALL, M_BGTZ, M_BGTZL): Likewise.
(M_BLEZ, M_BLEZL, M_BLTZ, M_BLTZL, M_BLTZALL, M_BNEL): Likewise.
(M_CACHE_OB, M_JALS_1, M_JALS_2, M_JALS_A): Likewise.
(M_LDC2_OB, M_LDL_OB, M_LDM_AB, M_LDM_OB): Likewise.
(M_LDP_AB, M_LDP_OB, M_LDR_OB, M_LL_OB, M_LLD_OB): Likewise.
(M_LWC2_OB, M_LWL_OB, M_LWM_AB, M_LWM_OB): Likewise.
(M_LWP_AB, M_LWP_OB, M_LWR_OB): Likewise.
(M_LWU_OB, M_PREF_OB, M_SC_OB, M_SCD_OB): Likewise.
(M_SDC2_OB, M_SDL_OB, M_SDM_AB, M_SDM_OB): Likewise.
(M_SDP_AB, M_SDP_OB, M_SDR_OB): Likewise.
(M_SWC2_OB, M_SWL_OB, M_SWM_AB, M_SWM_OB): Likewise.
(M_SWP_AB, M_SWP_OB, M_SWR_OB): Likewise.
(MICROMIPSOP_MASK_MAJOR, MICROMIPSOP_SH_MAJOR): New macros.
(MICROMIPSOP_MASK_IMMEDIATE, MICROMIPSOP_SH_IMMEDIATE): Likewise.
(MICROMIPSOP_MASK_DELTA, MICROMIPSOP_SH_DELTA): Likewise.
(MICROMIPSOP_MASK_CODE10, MICROMIPSOP_SH_CODE10): Likewise.
(MICROMIPSOP_MASK_TRAP, MICROMIPSOP_SH_TRAP): Likewise.
(MICROMIPSOP_MASK_SHAMT, MICROMIPSOP_SH_SHAMT): Likewise.
(MICROMIPSOP_MASK_TARGET, MICROMIPSOP_SH_TARGET): Likewise.
(MICROMIPSOP_MASK_EXTLSB, MICROMIPSOP_SH_EXTLSB): Likewise.
(MICROMIPSOP_MASK_EXTMSBD, MICROMIPSOP_SH_EXTMSBD): Likewise.
(MICROMIPSOP_MASK_INSMSB, MICROMIPSOP_SH_INSMSB): Likewise.
(MICROMIPSOP_MASK_CODE, MICROMIPSOP_SH_CODE): Likewise.
(MICROMIPSOP_MASK_CODE2, MICROMIPSOP_SH_CODE2): Likewise.
(MICROMIPSOP_MASK_CACHE, MICROMIPSOP_SH_CACHE): Likewise.
(MICROMIPSOP_MASK_SEL, MICROMIPSOP_SH_SEL): Likewise.
(MICROMIPSOP_MASK_OFFSET12, MICROMIPSOP_SH_OFFSET12): Likewise.
(MICROMIPSOP_MASK_3BITPOS, MICROMIPSOP_SH_3BITPOS): Likewise.
(MICROMIPSOP_MASK_STYPE, MICROMIPSOP_SH_STYPE): Likewise.
(MICROMIPSOP_MASK_OFFSET10, MICROMIPSOP_SH_OFFSET10): Likewise.
(MICROMIPSOP_MASK_RS, MICROMIPSOP_SH_RS): Likewise.
(MICROMIPSOP_MASK_RT, MICROMIPSOP_SH_RT): Likewise.
(MICROMIPSOP_MASK_RD, MICROMIPSOP_SH_RD): Likewise.
(MICROMIPSOP_MASK_FS, MICROMIPSOP_SH_FS): Likewise.
(MICROMIPSOP_MASK_FT, MICROMIPSOP_SH_FT): Likewise.
(MICROMIPSOP_MASK_FD, MICROMIPSOP_SH_FD): Likewise.
(MICROMIPSOP_MASK_FR, MICROMIPSOP_SH_FR): Likewise.
(MICROMIPSOP_MASK_RS3, MICROMIPSOP_SH_RS3): Likewise.
(MICROMIPSOP_MASK_PREFX, MICROMIPSOP_SH_PREFX): Likewise.
(MICROMIPSOP_MASK_BCC, MICROMIPSOP_SH_BCC): Likewise.
(MICROMIPSOP_MASK_CCC, MICROMIPSOP_SH_CCC): Likewise.
(MICROMIPSOP_MASK_COPZ, MICROMIPSOP_SH_COPZ): Likewise.
(MICROMIPSOP_MASK_MB, MICROMIPSOP_SH_MB): Likewise.
(MICROMIPSOP_MASK_MC, MICROMIPSOP_SH_MC): Likewise.
(MICROMIPSOP_MASK_MD, MICROMIPSOP_SH_MD): Likewise.
(MICROMIPSOP_MASK_ME, MICROMIPSOP_SH_ME): Likewise.
(MICROMIPSOP_MASK_MF, MICROMIPSOP_SH_MF): Likewise.
(MICROMIPSOP_MASK_MG, MICROMIPSOP_SH_MG): Likewise.
(MICROMIPSOP_MASK_MH, MICROMIPSOP_SH_MH): Likewise.
(MICROMIPSOP_MASK_MI, MICROMIPSOP_SH_MI): Likewise.
(MICROMIPSOP_MASK_MJ, MICROMIPSOP_SH_MJ): Likewise.
(MICROMIPSOP_MASK_ML, MICROMIPSOP_SH_ML): Likewise.
(MICROMIPSOP_MASK_MM, MICROMIPSOP_SH_MM): Likewise.
(MICROMIPSOP_MASK_MN, MICROMIPSOP_SH_MN): Likewise.
(MICROMIPSOP_MASK_MP, MICROMIPSOP_SH_MP): Likewise.
(MICROMIPSOP_MASK_MQ, MICROMIPSOP_SH_MQ): Likewise.
(MICROMIPSOP_MASK_IMMA, MICROMIPSOP_SH_IMMA): Likewise.
(MICROMIPSOP_MASK_IMMB, MICROMIPSOP_SH_IMMB): Likewise.
(MICROMIPSOP_MASK_IMMC, MICROMIPSOP_SH_IMMC): Likewise.
(MICROMIPSOP_MASK_IMMD, MICROMIPSOP_SH_IMMD): Likewise.
(MICROMIPSOP_MASK_IMME, MICROMIPSOP_SH_IMME): Likewise.
(MICROMIPSOP_MASK_IMMF, MICROMIPSOP_SH_IMMF): Likewise.
(MICROMIPSOP_MASK_IMMG, MICROMIPSOP_SH_IMMG): Likewise.
(MICROMIPSOP_MASK_IMMH, MICROMIPSOP_SH_IMMH): Likewise.
(MICROMIPSOP_MASK_IMMI, MICROMIPSOP_SH_IMMI): Likewise.
(MICROMIPSOP_MASK_IMMJ, MICROMIPSOP_SH_IMMJ): Likewise.
(MICROMIPSOP_MASK_IMML, MICROMIPSOP_SH_IMML): Likewise.
(MICROMIPSOP_MASK_IMMM, MICROMIPSOP_SH_IMMM): Likewise.
(MICROMIPSOP_MASK_IMMN, MICROMIPSOP_SH_IMMN): Likewise.
(MICROMIPSOP_MASK_IMMO, MICROMIPSOP_SH_IMMO): Likewise.
(MICROMIPSOP_MASK_IMMP, MICROMIPSOP_SH_IMMP): Likewise.
(MICROMIPSOP_MASK_IMMQ, MICROMIPSOP_SH_IMMQ): Likewise.
(MICROMIPSOP_MASK_IMMU, MICROMIPSOP_SH_IMMU): Likewise.
(MICROMIPSOP_MASK_IMMW, MICROMIPSOP_SH_IMMW): Likewise.
(MICROMIPSOP_MASK_IMMX, MICROMIPSOP_SH_IMMX): Likewise.
(MICROMIPSOP_MASK_IMMY, MICROMIPSOP_SH_IMMY): Likewise.
(MICROMIPSOP_MASK_CODE, MICROMIPSOP_SH_CODE): Likewise.
(MICROMIPSOP_MASK_CODE2, MICROMIPSOP_SH_CODE2): Likewise.
(MICROMIPSOP_MASK_CACHE, MICROMIPSOP_SH_CACHE): Likewise.
(MICROMIPSOP_MASK_CODE20, MICROMIPSOP_SH_CODE20): Likewise.
(MICROMIPSOP_MASK_PERFREG, MICROMIPSOP_SH_PERFREG): Likewise.
(MICROMIPSOP_MASK_CODE19, MICROMIPSOP_SH_CODE19): Likewise.
(MICROMIPSOP_MASK_ALN, MICROMIPSOP_SH_ALN): Likewise.
(MICROMIPSOP_MASK_VECBYTE, MICROMIPSOP_SH_VECBYTE): Likewise.
(MICROMIPSOP_MASK_VECALIGN, MICROMIPSOP_SH_VECALIGN): Likewise.
(MICROMIPSOP_MASK_DSPACC, MICROMIPSOP_SH_DSPACC): Likewise.
(MICROMIPSOP_MASK_DSPACC_S, MICROMIPSOP_SH_DSPACC_S): Likewise.
(MICROMIPSOP_MASK_DSPSFT, MICROMIPSOP_SH_DSPSFT): Likewise.
(MICROMIPSOP_MASK_DSPSFT_7, MICROMIPSOP_SH_DSPSFT_7): Likewise.
(MICROMIPSOP_MASK_SA3, MICROMIPSOP_SH_SA3): Likewise.
(MICROMIPSOP_MASK_SA4, MICROMIPSOP_SH_SA4): Likewise.
(MICROMIPSOP_MASK_IMM8, MICROMIPSOP_SH_IMM8): Likewise.
(MICROMIPSOP_MASK_IMM10, MICROMIPSOP_SH_IMM10): Likewise.
(MICROMIPSOP_MASK_WRDSP, MICROMIPSOP_SH_WRDSP): Likewise.
(MICROMIPSOP_MASK_RDDSP, MICROMIPSOP_SH_RDDSP): Likewise.
(MICROMIPSOP_MASK_BP, MICROMIPSOP_SH_BP): Likewise.
(MICROMIPSOP_MASK_MT_U, MICROMIPSOP_SH_MT_U): Likewise.
(MICROMIPSOP_MASK_MT_H, MICROMIPSOP_SH_MT_H): Likewise.
(MICROMIPSOP_MASK_MTACC_T, MICROMIPSOP_SH_MTACC_T): Likewise.
(MICROMIPSOP_MASK_MTACC_D, MICROMIPSOP_SH_MTACC_D): Likewise.
(MICROMIPSOP_MASK_BBITIND, MICROMIPSOP_SH_BBITIND): Likewise.
(MICROMIPSOP_MASK_CINSPOS, MICROMIPSOP_SH_CINSPOS): Likewise.
(MICROMIPSOP_MASK_CINSLM1, MICROMIPSOP_SH_CINSLM1): Likewise.
(MICROMIPSOP_MASK_SEQI, MICROMIPSOP_SH_SEQI): Likewise.
(micromips_opcodes): New declaration.
(bfd_micromips_num_opcodes): Likewise.
ld/testsuite/
2011-02-25 Catherine Moore <clm@codesourcery.com>
Chao-ying Fu <fu@mips.com>
Maciej W. Rozycki <macro@codesourcery.com>
* lib/ld-lib.exp (run_dump_test): Support distinct assembler
flags for the same source named multiple times.
* ld-mips-elf/jalx-1.s: New test source.
* ld-mips-elf/jalx-1.d: New test output.
* ld-mips-elf/jalx-1.ld: New test linker script.
* ld-mips-elf/jalx-2-main.s: New test source.
* ld-mips-elf/jalx-2-ex.s: Likewise.
* ld-mips-elf/jalx-2-printf.s: Likewise.
* ld-mips-elf/jalx-2.dd: New test output.
* ld-mips-elf/jalx-2.ld: New test linker script.
* ld-mips-elf/mips16-and-micromips.d: New test.
* ld-mips-elf/mips-elf.exp: Run the new tests
opcodes/
2011-02-25 Chao-ying Fu <fu@mips.com>
Maciej W. Rozycki <macro@codesourcery.com>
* micromips-opc.c: New file.
* mips-dis.c (micromips_to_32_reg_b_map): New array.
(micromips_to_32_reg_c_map, micromips_to_32_reg_d_map): Likewise.
(micromips_to_32_reg_e_map, micromips_to_32_reg_f_map): Likewise.
(micromips_to_32_reg_g_map, micromips_to_32_reg_l_map): Likewise.
(micromips_to_32_reg_q_map): Likewise.
(micromips_imm_b_map, micromips_imm_c_map): Likewise.
(micromips_ase): New variable.
(is_micromips): New function.
(set_default_mips_dis_options): Handle microMIPS ASE.
(print_insn_micromips): New function.
(is_compressed_mode_p): Likewise.
(_print_insn_mips): Handle microMIPS instructions.
* Makefile.am (CFILES): Add micromips-opc.c.
* configure.in (bfd_mips_arch): Add micromips-opc.lo.
* Makefile.in: Regenerate.
* configure: Regenerate.
* mips-dis.c (micromips_to_32_reg_h_map): New variable.
(micromips_to_32_reg_i_map): Likewise.
(micromips_to_32_reg_m_map): Likewise.
(micromips_to_32_reg_n_map): New macro.
2011-07-24 14:20:15 +00:00
bcd530a713
include/opcode/
...
2011-07-24 Maciej W. Rozycki <macro@codesourcery.com>
* mips.h (INSN_TRAP): Rename to...
(INSN_NO_DELAY_SLOT): ... this.
(INSN_SYNC): Remove macro.
gas/
2011-07-24 Maciej W. Rozycki <macro@codesourcery.com>
* config/tc-mips.c (can_swap_branch_p): Adjust for the rename of
INSN_TRAP to INSN_NO_DELAY_SLOT. Remove the check for INSN_SYNC
as well as explicit checks for ERET and DERET when scheduling
branch delay slots.
opcodes/
2011-07-24 Maciej W. Rozycki <macro@codesourcery.com>
* mips-opc.c (NODS): New macro.
(TRAP): Adjust for the rename of INSN_TRAP to INSN_NO_DELAY_SLOT.
(DSP_VOLA): Likewise.
(mips_builtin_opcodes): Add NODS annotation to "deret" and
"eret". Replace INSN_SYNC with NODS throughout. Use NODS in
place of TRAP for "wait", "waiti" and "yield".
* mips16-opc.c (NODS): New macro.
(TRAP): Adjust for the rename of INSN_TRAP to INSN_NO_DELAY_SLOT.
(mips16_opcodes): Use NODS in place of TRAP for "jalrc", "jrc",
"restore" and "save".
2011-07-24 14:04:51 +00:00
2dad5a910a
2011-07-01 Eric B. Weddington <eric.weddington@atmel.com>
...
* avr.h (AVR_ISA_AVR6): Remove AVR_ISA_SPMX as it was actually
a duplicate of AVR_ISA_SPM.
2011-07-01 17:14:03 +00:00
5d73b1f18f
PR binutils/12329
...
* avr-dis.c (avr_operand): Fix disassembly of ELPM, LPM and SPM
insns using post-increment addressing.
* avr.h (AVR_ISA_AVR6): Fix typo, adding AVR_ISA_SPMX.
2011-07-01 16:11:27 +00:00
ef26d60eba
sim: bfin: fix sign extension in dsp insns with MM flag
...
After testing the hardware with all the different dsp flags, the MM flag
triggers sign extension in all modes. So drop the limited use of it, and
the local custom helper that was also extending unsigned values. We also
can see that the flag checks in the mult/mac insns have the same behavior
with sign extending, so add a helper func to keep the logic the same in
both places.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-06-18 19:42:55 +00:00
8fb8dca73e
opcodes: blackfin: fix style
...
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-06-18 06:43:57 +00:00
aa137e4d51
* Makefile.am (ALL_MACHINES): Add cpu-tilegx.lo and cpu-tilepro.lo.
...
(ALL_MACHINE_CFILES): Add cpu-tilegx.c and cpu-tilepro.c.
(BFD32_BACKENDS): Add elf32-tilegx.lo, elf32-tilepro.lo,
and elfxx-tilegx.lo.
(BFD32_BACKENDS_CFILES): Add elf32-tilegx.c elf32-tilepro.c, and
elfxx-tilegx.c.
(BFD64_BACKENDS): Add elf64-tilegx.lo.
(BFD64_BACKENDS_CFILES): Add elf64-tilegx.c.
* Makefile.in: Regenerate.
* arctures.c (bfd_architecture): Define bfd_arch_tilepro,
bfd_arch_tilegx, bfd_mach_tilepro, bfd_mach_tilegx.
(bfd_arch_info): Add bfd_tilegx_arch, bfd_tilepro_arch.
(bfd_archures_list): Add bfd_tilegx_arch, bfd_tilepro_arch.
bfd-in2.h: Regenerate.
* config.bfd: Handle tilegx-*-* and tilepro-*-*.
* configure.in: Handle bfd_elf32_tilegx_vec, bfd_elf32_tilepro_vec,
and bfd_elf64_tilegx_vec.
* configure: Regenerate.
* elf-bfd.h (enum elf_target_id): Define TILEGX_ELF_DATA and
TILEPRO_ELF_DATA.
* libbfd.h: Regenerate.
* reloc.c: Add BFD_RELOC_TILEPRO_{COPY, GLOB_DAT, JMP_SLOT,
RELATIVE, BROFF_X1, JOFFLONG_X1, JOFFLONG_X1_PLT, IMM8_X0,
IMM8_Y0, IMM8_X1, IMM8_Y1, DEST_IMM8_X1, MT_IMM15_X1, MF_IMM15_X1,
IMM16_X0, IMM16_X1, IMM16_X0_LO, IMM16_X1_LO, IMM16_X0_HI,
IMM16_X1_HI, IMM16_X0_HA, IMM16_X1_HA, IMM16_X0_PCREL,
IMM16_X1_PCREL, IMM16_X0_LO_PCREL, IMM16_X1_LO_PCREL,
IMM16_X0_HI_PCREL, IMM16_X1_HI_PCREL, IMM16_X0_HA_PCREL,
IMM16_X1_HA_PCREL, IMM16_X0_GOT, IMM16_X1_GOT, IMM16_X0_GOT_LO,
IMM16_X1_GOT_LO, IMM16_X0_GOT_HI, IMM16_X1_GOT_HI,
IMM16_X0_GOT_HA, IMM16_X1_GOT_HA, MMSTART_X0, MMEND_X0,
MMSTART_X1, MMEND_X1, SHAMT_X0, SHAMT_X1, SHAMT_Y0, SHAMT_Y1,
IMM16_X0_TLS_GD, IMM16_X1_TLS_GD, IMM16_X0_TLS_GD_LO,
IMM16_X1_TLS_GD_LO, IMM16_X0_TLS_GD_HI, IMM16_X1_TLS_GD_HI,
IMM16_X0_TLS_GD_HA, IMM16_X1_TLS_GD_HA, IMM16_X0_TLS_IE,
IMM16_X1_TLS_IE, IMM16_X0_TLS_IE_LO, IMM16_X1_TLS_IE_LO,
IMM16_X0_TLS_IE_HI, IMM16_X1_TLS_IE_HI, IMM16_X0_TLS_IE_HA,
IMM16_X1_TLS_IE_HA, TLS_DTPMOD32, TLS_DTPOFF32, TLS_TPOFF32}
Add BFD_RELOC_TILEGX_{HW0, HW1, HW2, HW3, HW0_LAST, HW1_LAST,
HW2_LAST, COPY, GLOB_DAT, JMP_SLOT, RELATIVE, BROFF_X1,
JUMPOFF_X1, JUMPOFF_X1_PLT, IMM8_X0, IMM8_Y0, IMM8_X1, IMM8_Y1,
DEST_IMM8_X1, MT_IMM14_X1, MF_IMM14_X1, MMSTART_X0, MMEND_X0,
SHAMT_X0, SHAMT_X1, SHAMT_Y0, SHAMT_Y1, IMM16_X0_HW0,
IMM16_X1_HW0, IMM16_X0_HW1, IMM16_X1_HW1, IMM16_X0_HW2,
IMM16_X1_HW2, IMM16_X0_HW3, IMM16_X1_HW3, IMM16_X0_HW0_LAST,
IMM16_X1_HW0_LAST, IMM16_X0_HW1_LAST, IMM16_X1_HW1_LAST,
IMM16_X0_HW2_LAST, IMM16_X1_HW2_LAST, IMM16_X0_HW0_PCREL,
IMM16_X1_HW0_PCREL, IMM16_X0_HW1_PCREL, IMM16_X1_HW1_PCREL,
IMM16_X0_HW2_PCREL, IMM16_X1_HW2_PCREL, IMM16_X0_HW3_PCREL,
IMM16_X1_HW3_PCREL, IMM16_X0_HW0_LAST_PCREL,
IMM16_X1_HW0_LAST_PCREL, IMM16_X0_HW1_LAST_PCREL,
IMM16_X1_HW1_LAST_PCREL, IMM16_X0_HW2_LAST_PCREL,
IMM16_X1_HW2_LAST_PCREL, IMM16_X0_HW0_GOT, IMM16_X1_HW0_GOT,
IMM16_X0_HW1_GOT, IMM16_X1_HW1_GOT, IMM16_X0_HW2_GOT,
IMM16_X1_HW2_GOT, IMM16_X0_HW3_GOT, IMM16_X1_HW3_GOT,
IMM16_X0_HW0_LAST_GOT, IMM16_X1_HW0_LAST_GOT,
IMM16_X0_HW1_LAST_GOT, IMM16_X1_HW1_LAST_GOT,
IMM16_X0_HW2_LAST_GOT, IMM16_X1_HW2_LAST_GOT, IMM16_X0_HW0_TLS_GD,
IMM16_X1_HW0_TLS_GD, IMM16_X0_HW1_TLS_GD, IMM16_X1_HW1_TLS_GD,
IMM16_X0_HW2_TLS_GD, IMM16_X1_HW2_TLS_GD, IMM16_X0_HW3_TLS_GD,
IMM16_X1_HW3_TLS_GD, IMM16_X0_HW0_LAST_TLS_GD,
IMM16_X1_HW0_LAST_TLS_GD, IMM16_X0_HW1_LAST_TLS_GD,
IMM16_X1_HW1_LAST_TLS_GD, IMM16_X0_HW2_LAST_TLS_GD,
IMM16_X1_HW2_LAST_TLS_GD, IMM16_X0_HW0_TLS_IE,
IMM16_X1_HW0_TLS_IE, IMM16_X0_HW1_TLS_IE, IMM16_X1_HW1_TLS_IE,
IMM16_X0_HW2_TLS_IE, IMM16_X1_HW2_TLS_IE, IMM16_X0_HW3_TLS_IE,
IMM16_X1_HW3_TLS_IE, IMM16_X0_HW0_LAST_TLS_IE,
IMM16_X1_HW0_LAST_TLS_IE, IMM16_X0_HW1_LAST_TLS_IE,
IMM16_X1_HW1_LAST_TLS_IE, IMM16_X0_HW2_LAST_TLS_IE,
IMM16_X1_HW2_LAST_TLS_IE, TLS_DTPMOD64, TLS_DTPOFF64, TLS_TPOFF64,
TLS_DTPMOD32, TLS_DTPOFF32, TLS_TPOFF32}
* targets.c (bfd_elf32_tilegx_vec): Declare.
(bfd_elf32_tilepro_vec): Declare.
(bfd_elf64_tilegx_vec): Declare.
(bfd_target_vector): Add bfd_elf32_tilegx_vec, bfd_elf32_tilepro_vec,
and bfd_elf64_tilegx_vec.
* cpu-tilegx.c: New file.
* cpu-tilepro.c: New file.
* elf32-tilepro.h: New file.
* elf32-tilepro.c: New file.
* elf32-tilegx.c: New file.
* elf32-tilegx.h: New file.
* elf64-tilegx.c: New file.
* elf64-tilegx.h: New file.
* elfxx-tilegx.c: New file.
* elfxx-tilegx.h: New file.
* Makefile.am (TARGET_CPU_CFILES): Add config/tc-tilegx.c and
config/tc-tilepro.c.
(TARGET_CPU_HFILES): Add config/tc-tilegx.h and
config/tc-tilepro.h.
* Makefile.in: Regenerate.
* configure.tgt (tilepro-*-*): New.
(tilegx-*-*): Likewise.
* config/tc-tilegx.c: New file.
* config/tc-tilegx.h: Likewise.
* config/tc-tilepro.h: Likewise.
* config/tc-tilepro.c: Likewise.
* doc/Makefile.am (CPU_DOCS): Add c-tilegx.texi and
c-tilepro.texi.
* doc/Makefile.in: Regenerate.
* doc/all.texi (TILEGX): Define.
(TILEPRO): Define.
* doc/as.texinfo: Add Tile-Gx and TILEPro documentation. Include
c-tilegx.texi and c-tilepro.texi.
* doc/c-tilegx.texi: New.
* doc/c-tilepro.texi: New.
* gas/tilepro/t_constants.s: New file.
* gas/tilepro/t_constants.d: Likewise.
* gas/tilepro/t_insns.s: Likewise.
* gas/tilepro/tilepro.exp: Likewise.
* gas/tilepro/t_insns.d: Likewise.
* gas/tilegx/tilegx.exp: Likewise.
* gas/tilegx/t_insns.d: Likewise.
* gas/tilegx/t_insns.s: Likewise.
* dis-asm.h (print_insn_tilegx): Declare.
(print_insn_tilepro): Likewise.
* tilegx.h: New file.
* tilepro.h: New file.
* common.h: Add EM_TILEGX.
* tilegx.h: New file.
* tilepro.h: New file.
* Makefile.am (ALL_EMULATION_SOURCES): Add eelf32tilegx.c and
eelf32tilepro.c.
(ALL_64_EMULATION_SOURCES): Add eelf64tilegx.c.
(eelf32tilegx.c): New target.
(eelf32tilepro.c): Likewise.
(eelf64tilegx.c): Likewise.
* Makefile.in: Regenerate.
* configure.tgt: Handle tilegx-*-* and tilepro-*-*.
* emulparams/elf32tilegx.sh: New file.
* emulparams/elf64tilegx.sh: New file.
* emulparams/elf32tilepro.sh: New file.
* ld-elf/eh5.d: Don't run on tile*.
* ld-srec/srec.exp: xfail on tile*.
* ld-tilegx/external.s: New file.
* ld-tilegx/reloc.d: New file.
* ld-tilegx/reloc.s: New file.
* ld-tilegx/tilegx.exp: New file.
* ld-tilepro/external.s: New file.
* ld-tilepro/reloc.d: New file.
* ld-tilepro/reloc.s: New file.
* ld-tilepro/tilepro.exp: New file.
* Makefile.am (TARGET_LIBOPCODES_CFILES): Add tilegx-dis.c,
tilegx-opc.c, tilepro-dis.c, and tilepro-opc.c.
* Makefile.in: Regenerate.
* configure.in: Handle bfd_tilegx_arch and bfd_tilepro_arch.
* configure: Regenerate.
* disassemble.c (disassembler): Add ARCH_tilegx and ARCH_tilepro.
* po/POTFILES.in: Regenerate.
* tilegx-dis.c: New file.
* tilegx-opc.c: New file.
* tilepro-dis.c: New file.
* tilepro-opc.c: New file.
2011-06-13 15:18:54 +00:00
3b2f079304
2011-05-31 Paul Brook <paul@codesourcery.com>
...
gas/
* config/tc-arm.c (arm_cpus): Add Cortex-R5.
(arm_extensions): Allow idiv on ARMv7-R.
* doc/c-arm.text: Update idiv extension restrictions.
gas/testsuite/
* gas/arm/arm-idiv-bad.d: New test.
* gas/arm/arm-idiv-bad.s: New test.
* gas/arm/arm-idiv-bad.l: New test.
* gas/arm/arm-idiv.d: New test.
* gas/arm/arm-idiv.s: New test.
include/
* opcode/arm.h (ARM_ARCH_V7R_IDIV): Define.
2011-05-31 14:12:55 +00:00
c8fa16ed5a
2011-05-24 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
...
* config/tc-s390.c (md_gather_operands): Fix check for floating
register pair operands.
2011-05-24 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* opcode/s390.h: Replace S390_OPERAND_REG_EVEN with
S390_OPERAND_REG_PAIR.
2011-05-24 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* s390-opc.c: Replace S390_OPERAND_REG_EVEN with
S390_OPERAND_REG_PAIR. Fix INSTR_RRF_0UFEF instruction type.
* s390-opc.txt: Fix cxr instruction type.
2011-05-24 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* gas/s390/esa-g5.d: Fix fp register pair operands.
* gas/s390/esa-g5.s: Likewise.
* gas/s390/zarch-z196.d: Likewise.
* gas/s390/zarch-z196.s: Likewise.
* gas/s390/zarch-z9-109.d: Likewise.
* gas/s390/zarch-z9-109.s: Likewise.
* gas/s390/zarch-z9-ec.d: Likewise.
* gas/s390/zarch-z9-ec.s: Likewise.
2011-05-24 16:13:31 +00:00
5e4b319cdc
2011-05-24 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
...
* config/tc-s390.c (md_gather_operands): Emit an error for odd
numbered registers used as register pair operand.
2011-05-24 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* opcode/s390.h: Add S390_OPCODE_REG_EVEN flag.
2011-05-24 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* s390-opc.c: Add new instruction types marking register pair
operands.
* s390-opc.txt: Match instructions having register pair operands
to the new instruction types.
2011-05-24 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* gas/s390/esa-g5.d: Fix register pair operands.
* gas/s390/esa-g5.s: Likewise.
* gas/s390/esa-z9-109.d: Likewise.
* gas/s390/esa-z9-109.s: Likewise.
* gas/s390/zarch-z196.d: Likewise.
* gas/s390/zarch-z196.s: Likewise.
* gas/s390/zarch-z9-109.d: Likewise.
* gas/s390/zarch-z9-109.s: Likewise.
* gas/s390/zarch-z900.d: Likewise.
* gas/s390/zarch-z900.s: Likewise.
* gas/s390/zarch-z990.d: Likewise.
* gas/s390/zarch-z990.s: Likewise.
2011-05-24 13:33:57 +00:00
ac7f631be1
* gas/arm/arch7.s: Fix typo basepri_max should be basepri_mask.
...
* gas/arm/mrs-msr-thumb-v7e-m.s: Likewise.
* gas/arm/arch7.d: Update expected disassembly.
* gas/arm/attr-march-armv7.d: Remove Microcontroller tag.
* gas/arm/blx-bad.d: Only run for ELF based targets.
* gas/arm/mrs-msr-thumb-v6t2.d: Likewise.
* gas/arm/vldm-arm.d: Likewise.
* gas/arm/mrs-msr-thumb-v7-m.d: Likewise.
Remove qualifiers from PSR and IAPSR regsiter names.
* gas/arm/mrs-msr-thumb-v7e-m.d: Likewise.
* gas/arm/thumb2_bcond.d: Update expected disassembly to allow for
relaxing of branch insns.
* gas/arm/thumb32.d: Fix whitespace problems in disassembly.
* config/tc-arm.c (parse_psr): Use selected_cpu not cpu_variant to
detect M-profile targets.
(do_t_swi): Exclude v7 and higher variants from arm_ext_os test.
(v7m_psrs): Fix typo: basepri_max should be basepri_mask.
* arm-dis.c (psr_name): Revert previous delta.
* arm.h (ARM_AEXT_V7_ARM): Remove ARM_EXT_OS from bitmask.
2011-04-19 07:27:32 +00:00
84701018a5
PR gas/12296
...
* arm.h (ARM_AEXT_V7_ARM): Add ARM_EXT_OS.
* gas/arm/arch7.s: Add SVC insn.
* gas/arm/arch7.d: Add disassembly of SVC insn.
* gas/arm/attr-march-armv7.d: Add arch profile tag.
2011-04-11 15:23:09 +00:00
8cc66334fa
/bfd:
...
2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
* archures.c: Add AVR XMEGA architecture information.
* cpu-avr.c (arch_info_struct): Likewise.
* elf32-avr.c (bfd_elf_avr_final_write_processing): Likewise.
(elf32_avr_object_p): Likewise.
/gas:
2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
* config/tc-avr.c (struct avr_opcodes_s): Add opcode field.
(AVR_INSN): Change definition to match.
(avr_opcodes): Likewise, change to match.
(mcu_types): Add XMEGA architecture names and new XMEGA device names.
(md_show_usage): Add XMEGA architecture names.
(avr_operand): Add 'E' constraint for DES instruction of XMEGA devices.
Add support for SPM Z+ instruction.
* doc/c-avr.texi: Add documentation for XMEGA architectures and
devices.
/include/opcode:
2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
* avr.h (AVR_ISA_SPMX,AVR_ISA_DES,AVR_ISA_M256,AVR_ISA_XMEGA):
New instruction set flags.
(AVR_INSN): Add new instructions for SPM Z+, DES for XMEGA.
/ld:
2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
* Makefile.am (ALL_EMULATION_SOURCES): Add AVR XMEGA architectures.
(eavrxmega?.c): Likewise.
* configure.tgt (targ_extra_emuls): Likewise.
* emulparams/avrxmega1.sh: New file.
* emulparams/avrxmega2.sh: Likewise.
* emulparams/avrxmega3.sh: Likewise.
* emulparams/avrxmega4.sh: Likewise.
* emulparams/avrxmega5.sh: Likewise.
* emulparams/avrxmega6.sh: Likewise.
* emulparams/avrxmega7.sh: Likewise.
* emultempl/avrelf.em (avr_elf_${EMULATION_NAME}_before_allocation):
Add avrxmega6, avrxmega7 to list of architectures for no stubs.
/opcodes:
2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
* avr-dis.c (avr_operand): Add opcode_str parameter. Check for
post-increment to support LPM Z+ instruction. Add support for 'E'
constraint for DES instruction.
(print_insn_avr): Adjust calls to avr_operand. Rename variable.
2011-03-22 18:10:48 +00:00
3eebd5eb03
gas/
...
* config/tc-mips.c (macro): Handle M_PREF_AB.
include/opcode/
* mips.h (M_PREF_AB): New enum value.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Add "pref" macro.
2011-02-28 16:06:51 +00:00
89c0d58cff
Swap ChangeLog entries.
2011-02-28 16:03:38 +00:00
26bb3ddd50
gas/opcodes: blackfin: move dsp mac func defines to common header
...
The mmod field is decoded in a few places (gas/opcodes/sim), so move it to
a common place to avoid duplication.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-02-12 19:36:31 +00:00
dd76fcb82e
opcodes: blackfin: add multiple inclusion protection
...
Prevent build errors if the header happens to be included multiple times.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-02-11 17:47:54 +00:00
98d23befa7
gas/
...
* doc/as.texinfo (Target TIC6X options): Don't mention "-matomic".
* doc/c-tic6x.texi (TIC6X Directives): Don't mention ".atomic".
(TIC6X Options): Don't mention "-matomic".
* config/tc-tic6x.c (OPTION_MATOMIC, OPTION_MNO_ATOMIC): Delete.
(md_longopts): Remove corresponding entries.
(md_parse_option): Don't handle them.
(md_show_usage): Don't document them.
(tic6x_atomic): Delete variable.
(tic6x_update_features): Always copy tic6x_arch_enable to
tic6x_features.
(tic6x_arch_enable): Remove references to TIC6X_INSN_ATOMIC.
(s_tic6x_atomic, s_tic6x_noatomic): Remove functions.
(md_pseudo_table): Remove ".atomic" and ".noatomic".
gas/testsuite/
* gas/tic6x/dir-junk.l: Remove tests for .atomic and .noatomic.
* gas/tic6x/dir-junk.s: Likewise.
* gas/tic6x/insns-c674x-bad.d: Remove test.
* gas/tic6x/insns-c674x-bad.l: Likewise.
* gas/tic6x/insns-atomic.d: Remove "-matomic" switch.
include/opcode/
* tic6x-opcode-table.h (cmtl, ll, sl): Available on C64XP.
* tic6x.h (TIC6X_INSN_ATOMIC): Remove.
2011-02-03 23:20:26 +00:00
3c853d9313
PR gas/11395
...
* config/tc-hppa.c (pa_ip): Revert last change. Add variable need_cond
to determine whether a 64-bit condition is needed for 'A' and 'S'
conditions. Default to 32-bit never condition for logical and unit
instructions. Add error message for missing branch on bit condition.
* hppa.h (pa_opcodes): Revert last change. Exchange 32 and 64-bit
"bb" entries.
* hppa-dis.c (compare_cond_64_names): Change never condition to ",*".
(add_cond_64_names): Likewise.
(logical_cond_64_names): Likewise.
(unit_cond_64_names): Likewise.
2010-12-31 16:43:46 +00:00
79676006fb
Move ChangeLog entry.
2010-12-29 16:57:42 +00:00
a64718d3b1
PR gas/11395
...
* config/tc-hppa.c (pa_ip): Set doubleword carry/borrow bit when a
doubleword completer or doubleword condition is found in an add/sub
instruction. Reject match for 'A'/'S' only if there is no condition
and d bit is not set.
* gas/hppa/basic/add2.s: Add test for a simple doubleword carry
instruction.
* gas/hppa/basic/sub2.s: Add tests for simple word and doubleword
borrow instructions.
* gas/hppa/basic/basic.exp: Update regexps for above.
* opcode/hppa.h: Clear "d" bit in "add" and "sub" patterns.
2010-12-27 02:05:14 +00:00
1bec78e97d
include/opcode/
...
* mips.h: Update commentary after last commit.
2010-12-18 11:28:25 +00:00
9867540240
include/opcode/
...
2010-12-14 Mingjie Xing <mingjie.xing@gmail.com>
* mips.h (OP_*_OFFSET_A, OP_*_OFFSET_B, OP_*_OFFSET_C)
(OP_*_RZ, OP_*_FZ, INSN2_M_FP_D, INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z)
(INSN2_READ_GPR_Z, INSN2_READ_FPR_Z, INSN2_READ_GPR_D): Define.
opcodes/
2010-12-14 Mingjie Xing <mingjie.xing@gmail.com>
* mips-opc.c (WR_z, WR_Z, RD_z, RD_Z, RD_d): Define.
(mips_builtin_opcodes): Add loongson3a specific instructions.
* mips-dis.c (print_insn_args): Handle the new arguments +a|b|c|z|Z.
gas/
2010-12-14 Mingjie Xing <mingjie.xing@gmail.com>
* config/tc-mips.c (insn_uses_reg): Handle the new flags
INSN2_READ_FPR_Z, INSN2_READ_GPR_D and INSN2_READ_GPR_Z.
(append_insn): Handle delay-slot filling for the new flags.
(validate_mips_insn): Handle the new arguments +a|b|c|z|Z.
(mips_ip): Handle the new arguments +a|b|c|z|Z.
gas/testsuite/
2010-12-14 Mingjie Xing <mingjie.xing@gmail.com>
* gas/mips/loongson-3a-2.s, gas/mips/loongson-3a-2.d,
gas/mips/loongson-3a-3.s, gas/mips/loongson-3a-3.d: New tests.
* gas/mips/mips.exp: Run them.
2010-12-18 11:14:14 +00:00
1e8766d7c9
2010-11-25 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
...
* config/tc-s390.c (current_cpu): Initialize with latest CPU.
(init_default_arch): Default to z/Architecture mode if CPU provides it.
Remove the check setting the CPU default.
2010-11-25 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* opcode/s390.h (enum s390_opcode_cpu_val): Add S390_OPCODE_MAXCPU.
2010-11-25 09:33:54 +00:00
435b94a4ae
include/opcode/
...
* mips.h: Fix previous commit.
2010-11-23 20:24:32 +00:00
d051516a87
* mips.h (INSN_CHIP_MASK): Update according to INSN_LOONGSON_3A.
...
(INSN_LOONGSON_3A): Clear bit 31.
* elfxx-mips.c (mips_set_isa_flags): Move bfd_mach_loongson_3a
after bfd_mach_mips_sb1.
* config/tc-mips.c (mips_cpu_info_table): Move loongson3a after sb1.
2010-11-23 17:04:13 +00:00
251665fc5f
PR gas/12198
...
* gas/config/tc-arm.c (arm_arch_v6m_only): New variable.
(aeabi_set_public_attributes): Ensure we only set the Operating System
Extension when we are on an M-profile core.
* gas/testsuite/gas/arm/pr12198-1.d: New test.
* gas/testsuite/gas/arm/pr12918-1.s: Likewise.
* gas/testsuite/gas/arm/pr12198-2.d: Likewise.
* gas/testsuite/gas/arm/pr12918-2.s: Likewise.
* include/opcode/arm.h (ARM_AEXT_V6M_ONLY): New define.
(ARM_AEXT_V6M): Rewrite in terms of ARM_AEXT_V6M_ONLY.
(ARM_ARCH_V6M_ONLY): New define.
2010-11-15 10:03:05 +00:00
fd50354116
bfd/
...
* archures.c (bfd_mach_mips_loongson_3a): Defined.
* bfd-in2.h (bfd_mach_mips_loongson_3a): Defined.
* cpu-mips.c (I_loongson_3a): New add.
(arch_info_struct): Add loongson_3a.
* elfxx-mips.c (_bfd_elf_mips_mach): Add loongson_3a.
(mips_set_isa_flags): Add loongson_3a.
(mips_mach_extensions): Add loongson_3a in MIPS64 extensions.
binutils/
* readelf.c (get_machine_flags): Add loongson-3a.
gas/
* config/tc-mips.c (mips_cpu_info_table): Add loongson3a in MIPS 64.
* doc/c-mips.texi (MIPS cpu): Add loongson3a.
include/
* elf/mips.h (E_MIPS_MACH_LS3A): Defined.
* opcode/mips.h (INSN_LOONGSON_3A): Defined.
(CPU_LOONGSON_3A): Defined.
(OPCODE_IS_MEMBER): Add LOONGSON_3A.
opcodes/
* mips-dis.c (mips_arch_choices): Add loongson3a.
* mips-opc.c (IL3A): Defined as INSN_LOONGSON_3A.
(mips_builtin_opcodes): Modify some instructions' membership from
IL2F to IL2F|IL3A, since these instructions are supported by Loongson_3A.
2010-11-11 10:23:39 +00:00
4469d2be4b
cgen/
...
* utils-cgen.scm (gen-attr-accessors): Rename bool attribute to bool_.
* cpu/mep.opc (mep_cgen_insn_supported): Ditto.
include/opcode/
* cgen.h (CGEN_ATTR, CGEN_ATTR_TYPE): Rename bool attribute to bool_.
(CGEN_ATTR_BOOLS, CGEN_ATTR_CGEN_INSN_ALIAS_VALUE): Likewise.
opcodes/
* fr30-desc.h: Regenerate.
* frv-desc.h: Regenerate.
* ip2k-desc.h: Regenerate.
* iq2000-desc.h: Regenerate.
* lm32-desc.h: Regenerate.
* m32c-desc.h: Regenerate.
* m32r-desc.h: Regenerate.
* mep-desc.h: Regenerate.
* mep-opc.c: Regenerate.
* mt-desc.h: Regenerate.
* openrisc-desc.h: Regenerate.
* xc16x-desc.h: Regenerate.
* xstormy16-desc.h: Regenerate.
2010-10-09 06:50:23 +00:00
bb73df25a8
include/
...
* opcode/tic6x-control-registers.h (tscl): Now read_write.
gas/testsuite/
* gas/tic6x/insns-bad-1.s: Remove test for readonly tscl.
* gas/tic6x/insns-bad-1.l: Likewise.
* gas/tic6x/insns-c674x.d: Add test for writeable tscl.
* gas/tic6x/insns-c674x.s: Likewise.
2010-09-29 10:14:02 +00:00
d9aee5d7f7
2010-09-27 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
...
* s390-mkopc.c (enum s390_opcde_cpu_val): Add S390_OPCODE_Z196.
(main): Recognize the new CPU string.
* s390-opc.c: Add new instruction formats and masks.
* s390-opc.txt: Add new z196 instructions.
2010-09-27 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* opcode/s390.h: Add S390_OPCODE_Z196 to enum s390_opcode_cpu_val.
2010-09-27 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* config/tc-s390.c: (md_parse_option): New option -march=z196.
* doc/c-s390.texi: Document new option.
2010-09-27 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* gas/s390/s390.exp: Run the zarch-z196 test.
* gas/s390/zarch-z196.d: Add new instructions.
* gas/s390/zarch-z196.s: Likewise.
* gas/s390/zarch-z9-109.d: Likewise.
* gas/s390/zarch-z9-109.s: Likewise.
2010-09-27 13:36:48 +00:00
90ec0d684e
* bfd/bfd-in2.h (BFD_RELOC_ARM_HVC): New enum value.
...
* gas/config/tc-arm.c (arm_ext_virt): New variable.
(arm_reg_type): Add REG_TYPE_RNB for banked registers.
(reg_entry): Allow registers to be larger than a byte.
(reg_alias): Fix type warning.
(parse_operands): Parse banked registers when appropriate.
(do_mrs): Add support for Virtualization Extensions.
(do_hvc): New function.
(do_t_mrs): Add support for Virtualization Extensions.
(do_t_msr): Likewise.
(do_t_hvc): New function.
(SPLRBANK): New define.
(reg_names): Add banked registers.
(insns): Add support for Virtualization Extensions.
(md_apply_fixup): Likewise.
(arm_cpus): -mcpu=cortex-a15 implies the Virtualization Extensions.
(arm_extensions): Add 'virt' extension.
(aeabi_set_public_attributes): Add support for Virtualization
Extensions.
* gas/doc/c-arm.texi: Document 'virt' extension.
* gas/testsuite/gas/arm/armv7-a+virt.d: New test.
* gas/testsuite/gas/arm/armv7-a+virt.s: Likewise.
* gas/testsuite/gas/arm/attr-march-all.d: Update for Virtualization Extensions.
* gas/testsuite/gas/arm/attr-march-armv7-a+sec+virt.d: New test.
* gas/testsuite/gas/arm/attr-march-armv7-a+virt.d: Likewise.
* include/opcode/arm.h (ARM_EXT_VIRT): New define.
(ARM_ARCH_V7A_IDIV_MP_SEC): Rename...
(ARM_ARCH_V7A_IDIV_MP_SEC_VIRT): ...to this and include Virtualization
Extensions.
* opcodes/arm-dis.c (arm_opcodes): Add Virtualiztion Extensions support.
(thumb32_opcodes): Likewise.
(banked_regname): New function.
(print_insn_arm): Add Virtualization Extensions support.
(print_insn_thumb32): Likewise.
2010-09-23 15:52:19 +00:00
eea54501f7
* gas/config/tc-arm.c (arm_ext_adiv): New variable.
...
(do_div): New function.
(insns): Accept UDIV and SDIV in ARM state.
(arm_cpus): The cortex-a15 option has all current v7-A extensions.
(arm_extensions): Add 'idiv' extension.
(aeabi_set_public_attributes): Update Tag_DIV_use values for the
Integer Divide extension.
* gas/doc/c-arm.texi: Document the idiv extension.
* gas/testsuite/gas/arm/armv7-a+idiv.d: New test.
* gas/testsuite/gas/arm/armv7-a+idiv.s: Likewise.
* gas/testsuite/gas/arm/attr-march-all.d: Update for Integer divide extension.
* gas/testsuite/gas/arm/attr-march-armv7-a+idiv.d: New test.
* include/opcode/arm.h (ARM_AEXT_ADIV): New define.
(ARM_ARCH_V7A_IDIV_MP_SEC): Likewise.
* opcodes/arm-dis.c (arm_opcodes): Support disassembly of UDIV and SDIV in
ARM state.
2010-09-23 15:37:45 +00:00
b2a5fbdc94
* config/tc-arm.c (arm_ext_v6m): New variable.
...
(arm_ext_m): Add support for OS extension.
(arm_ext_os): New variable.
(do_t_swi): In v6-M ensure we have the OS extension.
(arm_cpus): The cortex-m1 and cortex-m0 options have the OS
extension by default.
(arm_archs): Add armv6s-m.
(arm_extensions): Add 'os' extension.
(cpu_arch_ver): Add support for v6S-M.
* gas/doc/c-arm.texi: Document the OS Extension, and v6-m and v6s-m
architecture options.
* gas/testsuite/gas/arm/archv6s-m-bad.d: New test.
* gas/testsuite/gas/arm/archv6s-m-bad.l: Likewise.
* gas/testsuite/gas/arm/archv6s-m.d: Likewise.
* gas/testsuite/gas/arm/archv6s-m.s: Likewise.
* gas/testsuite/gas/arm/attr-march-armv6-m+os.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv6s-m.d: Likewise.
* include/opcode/arm.h (ARM_EXT_OS): New define.
(ARM_AEXT_V6SM): Likewise.
(ARM_ARCH_V6SM): Likewise.
2010-09-23 15:31:34 +00:00
f4c65163c7
* gas/config/tc-arm.c (arm_ext_v6z): Remove.
...
(arm_ext_sec): New variable.
(do_t_smc): In Thumb state SMC requires v7-A.
(insns): Make SMC depend on Security Extensions.
(arm_cpus): All -mcpu=cortex-a* options have the Security Extensions.
(arm_extensions): Add 'sec' extension.
(cpu_arch_ver): Reorder.
(aeabi_set_public_attributes): Emit Tag_Virtualization_use as
appropriate.
* gas/doc/c-arm.texi: Document Security Extensions.
* gas/testsuite/gas/arm/attr-march-all.d: Update for Security Extensions..
* gas/testsuite/gas/arm/attr-march-armv6k+sec.d: New test.
* gas/testsuite/gas/arm/attr-march-armv6z.d: Update for Security Extensions.
* gas/testsuite/gas/arm/attr-march-armv6zk.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv6zkt2.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv6zt2.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv7-a+sec.d: New test.
* gas/testsuite/gas/arm/attr-mcpu.d: Update for Security Extensions.
* gas/testsuite/gas/arm/thumb32.d: Likewise.
* gas/testsuite/gas/arm/thumb32.s: Likewise.
* include/opcode/arm.h (ARM_EXT_V6Z): Remove.
(ARM_EXT_SEC): New define.
(ARM_AEXT_V6Z): Use Security Extensions.
(ARM_AEXT_V6ZK): Likeiwse.
(ARM_AEXT_V6ZT2): Likewise.
(ARM_AEXT_V6ZKT2): Likewise.
(ARM_AEXT_V7_ARM): Base v7 does not have Security Extensions.
(ARM_ARCH_V7A_SEC): New define.
(ARM_ARCH_V7A_MP): Rename...
(ARM_ARCH_V7A_MP_SEC): ...to this and add Security Extensions.
* ld/testsuite/ld-arm/attr-merge-6.attr: Update for Security Extensions.
* ld/testsuite/ld-arm/attr-merge-7.attr: Likewise.
* opcodes/arm-dis.c (arm_opcodes): SMC implies Security Extensions.
(thumb32_opcodes): Likewise.
2010-09-23 15:26:24 +00:00
60e5ef9f19
* gas/config/tc-arm.c (arm_ext_mp): Add.
...
(do_pld): Update comment.
(insns): Add support for pldw.
(arm_cpus): Update cortex-a5, cortex-a9, and cortex-a15 to support
MP extension.
(arm_extensions): Add 'mp' extension.
(aeabi_set_public_attributes): Emit correct build attribute when
MP extension is enabled.
* gas/doc/c-arm.texi: Update for MP extensions.
* gas/testsuite/gas/arm/arch7a-mp.d: Add.
* gas/testsuite/gas/arm/arch7ar-mp.s: Likewise.
* gas/testsuite/gas/arm/arch7r-mp.d: Likewise.
* gas/testsuite/gas/arm/armv2-mp-bad.d: Likewise.
* gas/testsuite/gas/arm/armv2-mp-bad.l: Likewise.
* gas/testsuite/gas/arm/attr-march-all.d: Update for MP extension.
* gas/testsuite/gas/arm/attr-march-armv7-a+mp.d: Add.
* gas/testsuite/gas/arm/attr-march-armv7-r+mp.d: Likewise.
* include/opcode/arm.h (ARM_EXT_MP): Add.
(ARM_ARCH_V7A_MP): Likewise.
* opcodes/arm-dis.c (arm_opcodes): Add support for pldw.
(thumb32_opcodes): Likewise.
2010-09-23 15:18:19 +00:00
73a63ccf2f
opcodes/gas: blackfin: support OUTC debug insn
...
The disassembler has partial (but incomplete/broken) support already for
the pseudo debug insn OUTC, so let's fix it up and finish it. And now
that the disassembler can handle it, make sure our assembler can output
it too.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-09-22 20:59:00 +00:00
ee99860ac0
opcodes: blackfin: strip trailing whitespace
2010-09-21 06:04:21 +00:00
f9c7014e9c
[include/opcode]
...
* rx.h (RX_Operand_Type): Add TwoReg.
(RX_Opcode_ID): Remove ediv and ediv2.
[opcodes]
* rx-decode.opc (SRR): New.
(rx_decode_opcode): Use it for movbi and movbir. Decode NOP2 (mov
r0,r0) and NOP3 (max r0,r0) special cases.
* rx-decode.c: Regenerate.
[sim/rx]
* rx.c (decode_cache_base): New.
(id_names): Remove ediv and edivu.
(optype_names): Add TwoReg.
(maybe_get_mem_page): New.
(rx_get_byte): Call it.
(get_op): Add TwoReg support.
(put_op): Likewise.
(PD, PS, PS2, GD, GS, GS2, DSZ, SSZ, S2SZ, US1, US2, OM): "opcode"
is a pointer now.
(DO_RETURN): New. We use longjmp to return an exception result.
(decode_opcode): Make opcode a pointer to the decode cache. Save
decoded opcode information and re-use. Call DO_RETURN instead of
return throughout. Remove ediv and edivu.
* mem.c (ptdc): New. Adds decode cache.
(rx_mem_ptr): Support it.
(rx_mem_decode_cache): New.
* mem.h (enum mem_ptr_action): add MPA_DECODE_CACHE.
(rx_mem_decode_cache): Declare.
* gdb-if.c (sim_resume): Add decode_opcode's setjmp logic here...
* main.c (main): ...and here. Use a fast loop if neither trace
nor disassemble is given.
* cpu.h (RX_MAKE_STEPPED, RX_MAKE_HIT_BREAK, RX_MAKE_EXITED,
RX_MAKE_STOPPED, RX_EXITED, RX_STOPPED): Adjust so that 0 is not a
valid code for anything.
2010-07-29 18:41:28 +00:00
933786524e
[sim/rx]
...
* README.txt: New.
* config.h (CYCLE_ACCURATE, CYCLE_STATS): New.
* configure.in (--enable-cycle-accurate, --enable-cycle-stats):
New. Default to enabled.
* configure: Regenerate.
* cpu.h (regs_type): Add cycle tracking info.
(reset_pipeline_stats): Declare.
(halt_pipeline_stats): Declare.
(pipeline_stats): Declare.
* main.c (done): Call pipeline_stats().
* mem.h (rx_mem_ptr): Moved to here ...
* mem.c (mem_ptr): ... from here. Rename throughout.
(mem_put_byte): Move LEDs to Port A. Add Port B to control cycle
statistics. Move UART to SCI4.
(mem_put_hi): Add TPU 1-2. TPU 1 and 2 count CPU cycles.
* reg.c (init_regs): Set Rt reg to -1 (no reg).
* rx.c: Add cycle counting and statistics throughout.
(rx_get_byte): Optimize for speed.
(decode_opcode): Likewise.
(reset_pipeline_stats): New.
(halt_pipeline_stats): New.
(pipeline_stats): New.
* trace.c (sim_disasm_one): Print cycle count.
[include/opcode]
* rx.h (RX_Opcode_ID): Add nop2 and nop3 for statistics.
2010-07-28 21:58:22 +00:00
1cd986c585
Add support for v850E2 and v850E2V3
2010-07-23 14:52:54 +00:00
9a2c708887
gas/
...
* config/tc-mips.c (nops_for_insn_or_target): Replace
MIPS16_INSN_BRANCH with MIPS16_INSN_UNCOND_BRANCH and
MIPS16_INSN_COND_BRANCH.
include/opcode/
* mips.h (MIPS16_INSN_UNCOND_BRANCH): New macro.
(MIPS16_INSN_BRANCH): Rename to...
(MIPS16_INSN_COND_BRANCH): ... this.
opcodes/
* mips-dis.c (print_mips16_insn_arg): Remove branch instruction
type and delay slot determination.
(print_insn_mips16): Extend branch instruction type and delay
slot determination to cover all instructions.
* mips16-opc.c (BR): Remove macro.
(UBR, CBR): New macros.
(mips16_opcodes): Update branch annotation for "b", "beqz",
"bnez", "bteqz" and "btnez". Add branch annotation for "jalrc"
and "jrc".
2010-07-06 00:02:46 +00:00
bdc70b4a03
include/opcode/
...
* ppc.h (PPC_OPCODE_32, PPC_OPCODE_BOOKE64, PPC_OPCODE_CLASSIC): Delete.
Renumber other PPC_OPCODE defines.
gas/
* config/tc-ppc.c (ppc_set_cpu): Remove old opcode flags.
(ppc_setup_opcodes): Likewise. Simplify opcode selection.
opcodes/
* ppc-dis.c (ppc_opts, powerpc_init_dialect): Remove old opcode flags.
* ppc-opc.c (PPC32, POWER32, COM32, CLASSIC): Delete.
(PPC64, MFDEC2): Update.
(NON32, NO371): Define.
(powerpc_opcode): Update to not use old opcode flags, and avoid
-m601 duplicates.
2010-07-03 06:51:56 +00:00
f2bae120dc
* ppc.h (PPC_OPCODE_COMMON): Expand comment.
2010-07-03 03:32:50 +00:00
360cfc9c8b
remove maxq-coff port
2010-06-29 04:17:34 +00:00
e01d869a3b
gas/
...
* config/tc-ppc.c (md_assemble): Emit APUinfo section for
PPC_OPCODE_E500.
gas/testsuite/
* gas/ppc/e500.s: Add eieio, mbar and lwsync
* gas/ppc/e500.d: Likewise.
include/opcode/
* ppc.h (PPC_OPCODE_E500): Define.
opcodes/
* ppc-dis.c (ppc_opts): Remove PPC_OPCODE_E500MC from e500 and
e500x2. Add PPC_OPCODE_E500 to e500 and e500x2
* ppc-opc.c (powerpc_opcodes): Deprecate all opcodes on EFS which
touch floating point regs and are enabled by COM, PPC or PPCCOM.
Treat sync as msync on e500. Treat eieio as mbar 1 on e500.
Treat lwsync as msync on e500.
2010-06-14 14:48:05 +00:00
f79e2745b2
gas/
...
* config/tc-mips.c (is_opcode_valid): Remove expansionp.
(macro_build): Change invocation of is_opcode_valid.
(mips_ip): Likewise.
gas/testsuite/
* gas/mips/mips-no-jalx.l: Delete.
* gas/mips/mips-no-jalx.s: Delete.
* gas/mips/mips-jalx-2.d: New.
* gas/mips/mips-jalx-2.s: New.
* gas/mips/mips.exp (mips-jalx-2): Run new test.
(mips-no-jalx): Remove deleted test.
include/
* opcode/mips.h (INSN_MIPS16): Remove.
opcodes/
* mips-dis.c (mips_arch): Remove INSN_MIPS16.
* mips-opc.c (I16): Remove.
(mips_builtin_op): Reclassify jalx.
2010-05-26 12:59:56 +00:00
2462afa169
gas/testsuite:
...
* gas/tic6x/insns-c674x.s, gas/tic6x/insns-c674x.d: Also test
"b .S2 b3".
include/opcode:
* tic6x-insn-formats.h (s_branch): Correct typo in bitmask.
2010-04-21 18:56:45 +00:00
e4e42b45d5
Upgrade header files to use GPLv3
2010-04-15 10:26:09 +00:00
40b365969f
bfd:
...
* Makefile.am (ALL_MACHINES): Add cpu-tic6x.lo.
(ALL_MACHINES_CFILES): Add cpu-tic6x.c.
(BFD32_BACKENDS): Add elf32-tic6x.lo.
(BFD32_BACKENDS_CFILES): Add elf32-tic6x.c.
* Makefile.in: Regenerate.
* archures.c (bfd_arch_tic6x, bfd_tic6x_arch): New.
(bfd_archures_list): Update.
* config.bfd (tic6x-*-elf): New.
* configure.in (bfd_elf32_tic6x_be_vec, bfd_elf32_tic6x_le_vec):
New.
* configure: Regenerate.
* cpu-tic6x.c, elf32-tic6x.c: New.
* reloc.c (BFD_RELOC_C6000_PCR_S21, BFD_RELOC_C6000_PCR_S12,
BFD_RELOC_C6000_PCR_S10, BFD_RELOC_C6000_PCR_S7,
BFD_RELOC_C6000_ABS_S16, BFD_RELOC_C6000_ABS_L16,
BFD_RELOC_C6000_ABS_H16, BFD_RELOC_C6000_SBR_U15_B,
BFD_RELOC_C6000_SBR_U15_H, BFD_RELOC_C6000_SBR_U15_W,
BFD_RELOC_C6000_SBR_S16, BFD_RELOC_C6000_SBR_L16_B,
BFD_RELOC_C6000_SBR_L16_H, BFD_RELOC_C6000_SBR_L16_W,
BFD_RELOC_C6000_SBR_H16_B, BFD_RELOC_C6000_SBR_H16_H,
BFD_RELOC_C6000_SBR_H16_W, BFD_RELOC_C6000_SBR_GOT_U15_W,
BFD_RELOC_C6000_SBR_GOT_L16_W, BFD_RELOC_C6000_SBR_GOT_H16_W,
BFD_RELOC_C6000_DSBT_INDEX, BFD_RELOC_C6000_PREL31,
BFD_RELOC_C6000_COPY, BFD_RELOC_C6000_ALIGN,
BFD_RELOC_C6000_FPHEAD, BFD_RELOC_C6000_NOCMP): New.
* targets.c (bfd_elf32_tic6x_be_vec, bfd_elf32_tic6x_le_vec): New.
(_bfd_target_vector): Update.
* bfd-in2.h, libbfd.h: Regenerate.
binutils:
* MAINTAINERS: Add self as TI C6X maintainer.
* NEWS: Add news entry for TI C6X support.
* readelf.c: Include elf/tic6x.h.
(guess_is_rela): Handle EM_TI_C6000.
(dump_relocations): Likewise.
(get_tic6x_dynamic_type): New.
(get_dynamic_type): Call it.
(get_machine_flags): Handle EF_C6000_REL.
(get_osabi_name): Handle machine-specific values only for relevant
machines. Handle C6X values.
(get_tic6x_segment_type): New.
(get_segment_type): Call it.
(get_tic6x_section_type_name): New.
(get_section_type_name): Call it.
(is_32bit_abs_reloc, is_16bit_abs_reloc, is_none_reloc): Handle
EM_TI_C6000.
gas:
* Makefile.am (TARGET_CPU_CFILES): Add config/tc-tic6x.c.
(TARGET_CPU_HFILES): Add config/tc-tic6x.h.
* Makefile.in: Regenerate.
* NEWS: Add news entry for TI C6X support.
* app.c (do_scrub_chars): Handle "||^" for TI C6X. Handle
TC_PREDICATE_START_CHAR and TC_PREDICATE_END_CHAR. Keep spaces in
operands if TC_KEEP_OPERAND_SPACES.
* configure.tgt (tic6x-*-*): New.
* config/tc-ia64.h (TC_PREDICATE_START_CHAR,
TC_PREDICATE_END_CHAR): Define.
* config/tc-tic6x.c, config/tc-tic6x.h: New.
* doc/Makefile.am (CPU_DOCS): Add c-tic6x.texi.
* doc/Makefile.in: Regenerate.
* doc/all.texi (TIC6X): Define.
* doc/as.texinfo: Add TI C6X documentation. Include c-tic6x.texi.
* doc/c-tic6x.texi: New.
gas/testsuite:
* gas/tic6x: New directory and testcases.
include:
* dis-asm.h (print_insn_tic6x): Declare.
include/elf:
* common.h (ELFOSABI_C6000_ELFABI, ELFOSABI_C6000_LINUX): Define.
* tic6x.h: New.
include/opcode:
* tic6x-control-registers.h, tic6x-insn-formats.h,
tic6x-opcode-table.h, tic6x.h: New.
ld:
* Makefile.am (ALL_EMULATIONS): Add eelf32_tic6x_be.o and
eelf32_tic6x_le.o.
(eelf32_tic6x_be.c, eelf32_tic6x_le.c): New.
* NEWS: Add news entry for TI C6X support.
* configure.tgt (tic6x-*-*): New.
* emulparams/elf32_tic6x_be.sh, emulparams/elf32_tic6x_le.sh: New.
ld/testsuite:
* ld-elf/flags1.d, ld-elf/merge.d: XFAIL for tic6x-*-*.
* ld-elf/sec-to-seg.exp: Set B_test_same_seg to 0 for tic6x-*-*.
* ld-tic6x: New directory and testcases.
opcodes:
* Makefile.am (TARGET_LIBOPCODES_CFILES): Add tic6x-dis.c.
* Makefile.in: Regenerate.
* configure.in (bfd_tic6x_arch): New.
* configure: Regenerate.
* disassemble.c (ARCH_tic6x): Define if ARCH_all.
(disassembler): Handle TI C6X.
* tic6x-dis.c: New.
2010-03-25 21:12:36 +00:00
Sandra Loosemore
Kyrylo Tkachov
Yufeng Zhang
Nick Clifton
Peter Bergner
Alan Modra
Dave Anglin
Andreas Krebbel
Anthony Green
H.J. Lu
Matthew Gretton-Dann
David S. Miller
Maciej W. Rozycki
Sean Keys
James Lemke
Walter Lee
Andrew Pinski
DJ Delorie
Richard Sandiford
Eric B. Weddington
Mike Frysinger
Paul Brook
Bernd Schmidt
Catherine Moore
Joseph Myers