* config/pa/fptr.c (_dl_read_access_allowed): Change argument to
unsigned int. Adjust callers.
(__canonicalize_funcptr_for_compare): Change plabel type to volatile
unsigned int *. Load relocation offset before function pointer.
Add barrier to ensure ordering.
From-SVN: r277015
* config/pa/lib2funcs.S (__gcc_plt_call): Load branch target to %r21.
Load PIC register after branch target. Fix white space.
* config/pa/milli64.S ($$dyncall): Separate LINUX and non LINUX
implementations. Load PIC register after branch target. Don't
clobber function pointer when it points to function descriptor.
Use nullification instead of branch in LINUX implementation.
From-SVN: r276925
The DCache clean & ICache invalidation requirements for instructions
to be data coherence are discoverable through new fields in CTR_EL0.
Let's support the two bits if they are enabled, the CPU core will
not execute the unnecessary DCache clean or Icache Invalidation
instructions.
2019-09-25 Shaokun Zhang <zhangshaokun@hisilicon.com>
* config/aarch64/sync-cache.c (__aarch64_sync_cache_range): Add support for
CTR_EL0.IDC and CTR_EL0.DIC.
From-SVN: r276122
This is causing regressions when mixing with user code compiled in ARM mode.
2019-09-20 Christophe Lyon <christophe.lyon@st.com>
Revert:
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
* config/arm/unwind-arm.c (_Unwind_VRS_Set): Handle thumb-only
architecture.
From-SVN: r276001
This is the libgcc part of the interface -- providing the functions.
Rationale is provided at the top of libgcc/config/aarch64/lse.S.
* config/aarch64/lse-init.c: New file.
* config/aarch64/lse.S: New file.
* config/aarch64/t-lse: New file.
* config.host: Add t-lse to all aarch64 tuples.
From-SVN: r275967
Without this, when we are unwinding across a signal frame we can jump
to an even address which leads to an exception.
This is needed in __gnu_persnality_sigframe_fdpic() when restoring the
PC from the signal frame since the PC saved by the kernel has the LSB
bit set to zero.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
libgcc/
* config/arm/unwind-arm.c (_Unwind_VRS_Set): Handle thumb-only
architecture.
Co-Authored-By: Mickaël Guêné <mickael.guene@st.com>
From-SVN: r275575
The main difference with existing support is that function addresses
are function descriptor addresses instead. This means that all code
dealing with function pointers now has to cope with function
descriptors instead.
For the same reason, Linux kernel helpers can no longer be called by
dereferencing their address, so we implement wrappers that directly
call the kernel helpers.
When restoring a function address, we also have to restore the FDPIC
register value (r9).
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
gcc/
* ginclude/unwind-arm-common.h (unwinder_cache): Add reserved5
field.
libgcc/
* config/arm/linux-atomic.c (__kernel_cmpxchg): Add FDPIC support.
(__kernel_dmb): Likewise.
(__fdpic_cmpxchg): New function.
(__fdpic_dmb): New function.
* config/arm/unwind-arm.h (FDPIC_REGNUM): New define.
(gnu_Unwind_Find_got): New function.
(_Unwind_decode_typeinfo_ptr): Add FDPIC support.
* unwind-arm-common.inc (UCB_PR_GOT): New.
(funcdesc_t): New struct.
(get_eit_entry): Add FDPIC support.
(unwind_phase2): Likewise.
(unwind_phase2_forced): Likewise.
(__gnu_Unwind_RaiseException): Likewise.
(__gnu_Unwind_Resume): Likewise.
(__gnu_Unwind_Backtrace): Likewise.
* unwind-pe.h (read_encoded_value_with_base): Likewise.
libstdc++/
* libsupc++/eh_personality.cc (get_ttype_entry): Add FDPIC
support.
Co-Authored-By: Mickaël Guêné <mickael.guene@st.com>
From-SVN: r275568
In FDPIC, we need to make sure __do_global_dtors_aux and frame_dummy
are referenced by their address, not by pointers to the function
descriptors.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
libgcc/
* libgcc/crtstuff.c: Add support for FDPIC.
Co-Authored-By: Mickaël Guêné <mickael.guene@st.com>
From-SVN: r275567
The new arm-uclinuxfdpiceabi target behaves pretty much like
arm-linux-gnueabi. In order to enable the same set of features, we
have to update several configure scripts that generally match targets
like *-*-linux*: in most places, we add *-uclinux* where there is
already *-linux*, or uclinux* when there is already linux*.
In gcc/config.gcc and libgcc/config.host we use *-*-uclinuxfdpiceabi
because there is already a different behaviour for *-*uclinux* target.
In libtool.m4, we use uclinuxfdpiceabi in cases where ELF shared
libraries support is required, as uclinux does not guarantee that.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
config/
* futex.m4: Handle *-uclinux*.
* tls.m4 (GCC_CHECK_TLS): Likewise.
gcc/
* config.gcc: Handle *-*-uclinuxfdpiceabi.
libatomic/
* configure.tgt: Handle arm*-*-uclinux*.
* configure: Regenerate.
libgcc/
* config.host: Handle *-*-uclinuxfdpiceabi.
libitm/
* configure.tgt: Handle *-*-uclinux*.
* configure: Regenerate.
* libtool.m4: Handle uclinuxfdpiceabi.
From-SVN: r275564
This re-enables -msave-restore for shared libraries, and uses the
t-slibgcc-libgcc file to get the save-restore routines included directly
in shared libraries so that we don't need to indirect through the PLT
to reach them, which doesn't work.
gcc/
* config/riscv/riscv.c (riscv_option_override): Revert 2019-08-30
change.
libgcc/
* config.host (riscv*-*-linux*): Add t-slibgcc-libgcc to tmake_file.
(riscv*-*-freebsd*): Likewise.
From-SVN: r275478
gcc/ChangeLog:
* config.gcc (hppa*-*-netbsd*): New target.
* config/pa/pa-netbsd.h: New file.
* config/pa/pa32-netbsd.h: New file.
libgcc/ChangeLog:
* config.host (hppa*-*-netbsd*): New case.
* config/pa/t-netbsd: New file.
Co-Authored-By: Matthew Green <mrg@eterna.com.au>
Co-Authored-By: Maya Rashish <coypu@sdf.org>
Co-Authored-By: Nick Hudson <nick@nthcliff.demon.co.uk>
From-SVN: r273933
At present it is possible to call the CMSE functions for checking
addresses (such as cmse_check_address_range) and forget to check/use
the return value. This patch makes the interfaces more robust against
programmer error by marking these functions with the warn_unused_result
attribute. With this set, any use of these functions that does not use
the result will produce a warning.
This produces a warning on default warn levels when the result of the
cmse functions is not used.
For the following function:
void foo()
{
int *data;
cmse_check_address_range((int*)data, 0, 0);
}
The following warning is emitted:
warning: ignoring return value of 'cmse_check_address_range' declared
with attribute 'warn_unused_result' [-Wunused-result]
6 | cmse_check_address_range((int*)data, 0, 0);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gcc/ChangeLog:
2019-07-31 Joel Hutton <Joel.Hutton@arm.com>
* config/arm/arm_cmse.h (cmse_nonsecure_caller): Add
warn_unused_result attribute.
(cmse_check_address_range): Add warn_unused_result attribute.
libgcc/ChangeLog:
2019-07-31 Joel Hutton <Joel.Hutton@arm.com>
* config/arm/cmse.c (cmse_check_address_range): Add
warn_unused_result attribute.
2019-07-31 Joel Hutton <Joel.Hutton@arm.com>
* gcc.target/arm/cmse/cmse-17.c: New test.
From-SVN: r273924
2019-07-22 Martin Liska <mliska@suse.cz>
* config/avr/avr.c (avr_asm_output_aligned_decl_common): Update
comment.
* toplev.c (compile_file): Do not emit __gnu_lto_v1 symbol.
2019-07-22 Martin Liska <mliska@suse.cz>
* config/pa/stublib.c: Remove stub symbol __gnu_lto_v1.
* config/pa/t-stublib: Likewise.
2019-07-22 Martin Liska <mliska@suse.cz>
* simple-object-elf.c (simple_object_elf_copy_lto_debug_sections):
Do not search for gnu_lto_v1, but search for first '\0'.
From-SVN: r273662
Fixes bad assembly logic with software divide as reported by Richard Selvaggi.
Also, add a basic test to verify the soft math works when enabled.
gcc/testsuite/ChangeLog:
PR target/90362
* gcc.target/or1k/div-mul-3.c: New test.
libgcc/ChangeLog:
PR target/90362
* config/or1k/lib1funcs.S (__udivsi3): Change l.sfeqi
to l.sfeq and l.sfltsi to l.sflts equivalents as the immediate
instructions are not available on every processor. Change a
l.bnf to l.bf to fix logic issue.
From-SVN: r273648
t-darwin8 is nolonger needed (or present) for pre-10.4 powerpc, so remove
the reference.
2019-07-04 Iain Sandoe <iain@sandoe.co.uk>
* config.host: Remove reference to t-darwin8.
From-SVN: r273091
The library handling and some of the options for creating the crts for
the older PPC Darwin versions had bit-rotted somewhat. This adjusts the
build criteria for the crts to avoid newer ld64 versions warnings about
mismatches in build and object versions.
Added to some of the comments that it's documented why the specs are as
they are.
2019-07-03 Iain Sandoe <iain@sandoe.co.uk>
gcc/
* config/darwin.h (REAL_LIBGCC_SPEC): Adjust for earlier Darwin.
(STARTFILE_SPEC): Split crt3 into a separate spec.
(DARWIN_EXTRA_SPECS): Add crt2 and crt3 spec.
(DARWIN_CRT2_SPEC): New.
(DARWIN_CRT3_SPEC): New.
(MIN_LD64_OMIT_STUBS): Revise to 62.1.
* config/rs6000/darwin.h (DARWIN_CRT2_SPEC): Revise conditions.
(DARWIN_CRT3_SPEC): New.
libgcc/
2019-07-03 Iain Sandoe <iain@sandoe.co.uk>
* config.host (powerpc-*-darwin*,powerpc64-*-darwin*): Revise crt
list.
* config/rs6000/t-darwin: Build crt3_2 for older systems. Revise
mmacosx-version-min for crts to run across all system versions.
* config/rs6000/t-darwin64 (LIB2ADD): Remove.
* config/t-darwin: Revise mmacosx-version-min for crts to run across
system versions >= 10.4.
From-SVN: r273016
2019-07-03 Martin Liska <mliska@suse.cz>
* gcc.dg/tree-prof/val-prof-2.c: Update scanned pattern
as we do now better.
2019-07-03 Martin Liska <mliska@suse.cz>
* libgcov-merge.c (merge_single_value_set): Support N values.
* libgcov-profiler.c (__gcov_one_value_profiler_body): Likewise.
From-SVN: r273004
We have been including this in libgcc, which means that we have to append
-lgcc even when using shared libgcc. In preparation for revision of libgcc
split this into an endfile.
gcc/
2019-06-25 Iain Sandoe <iain@sandoe.co.uk>
* config/rs6000/darwin.h (ENDFILE_SPEC): New.
libgcc/
2019-06-25 Iain Sandoe <iain@sandoe.co.uk>
* config.host: Add libef_ppc.a to the extra files for powerpc-darwin.
* config/rs6000/t-darwin: (PPC_ENDFILE_SRC, PPC_ENDFILE_OBJS): New.
Build objects for the out of line save/restore register functions
so that they can be used for any supported Darwin version.
* config/t-darwin: Default the build Darwin version to Darwin8
(MacOS 10.4).
From-SVN: r272659
2019-06-25 Martin Liska <mliska@suse.cz>
* libgcov-driver-system.c (replace_filename_variables): Do not
call strlen with NULL argument.
From-SVN: r272650
Atm we see:
...
libgcc/config/nvptx/crt0.c:36:1: warning: no previous prototype for \
‘__main’ [-Wmissing-prototypes]
...
Fix this by adding the prototype.
Build and reg-tested on nvptx.
Build and reg-tested on x86_64 with nvptx accelerator.
2019-06-18 Tom de Vries <tdevries@suse.de>
* config/nvptx/crt0.c (__main): Declare.
From-SVN: r272412
gcc/ChangeLog:
2019-06-16 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/msp430/msp430.c (msp430_expand_helper): Setup arguments which
describe how to perform MSPABI compliant 64-bit shift.
* config/msp430/msp430.md (ashldi3): New define_expand.
(ashrdi3): New define_expand.
(lshrdi3): New define_expand.
libgcc/ChangeLog:
2019-06-16 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/msp430/slli.S (__mspabi_sllll): New library function for
performing a logical left shift of a 64-bit value.
* config/msp430/srai.S (__mspabi_srall): New library function for
performing a arithmetic right shift of a 64-bit value.
* config/msp430/srll.S (__mspabi_srlll): New library function for
performing a logical right shift of a 64-bit value.
gcc/testsuite/ChangeLog:
2019-06-16 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* gcc.target/msp430/mspabi_sllll.c: New test.
* gcc.target/msp430/mspabi_srall.c: New test.
* gcc.target/msp430/mspabi_srlll.c: New test.
* gcc.c-torture/execute/shiftdi-2.c: New test.
From-SVN: r272360
This is a roll-up of a set of changes needed to support the Arm EABI on NetBSD.
2019-06-14 Matt Thomas <matt@3am-software.com>
Matthew Green <mrg@eterna.com.au>
Nick Hudson <skrll@netbsd.org>
Maya Rashish <coypu@sdf.org>
Richard Earnshaw <rearnsha@arm.com>
gcc:
* config.gcc (arm*-*-netbsdelf*) Add support for EABI configuration.
* config.host (arm*-*-netbsd*): Use driver-arm.o on native NetBSD.
* config/arm/netbsd-eabi.h: New file.
* config/arm/netbsd-elf.h (TARGET_OS_CPP_BUILTINS): Undefine before
redefining.
(SUBTARGET_EXTRA_ASM_SPEC): Don't pass -matpcs to the assembler.
* config/netbsd-elf.h (NETBSD_LINK_LD_ELF_SO_SPEC): New define.
(NETBSD_SUBTARGET_EXTRA_SPECS): New define.
(SUBTARGET_EXTRA_SPECS): Define to NETBSD_SUBTARGET_EXTRA_SPECS.
libatomic:
* configure.tgt (arm*): Handle NetBSD in the same way as FreeBSD.
libgcc:
* config.host (arm*-*-netbsdelf*): Add support for EABI configurations.
* config/arm/t-netbsd (LIB1ASMFUNCS): Add some additional assembler
functions to build.
* config/arm/t-netbsd-eabi: New file.
Co-Authored-By: Matthew Green <mrg@eterna.com.au>
Co-Authored-By: Maya Rashish <coypu@sdf.org>
Co-Authored-By: Nick Hudson <skrll@netbsd.org>
Co-Authored-By: Richard Earnshaw <rearnsha@arm.com>
From-SVN: r272290
libgcc/ChangeLog:
2019-06-12 Dimitar Dimitrov <dimitar@dinux.eu>
* config.host: Add PRU target.
* config/pru/asri.c: New file.
* config/pru/eqd.c: New file.
* config/pru/eqf.c: New file.
* config/pru/ged.c: New file.
* config/pru/gef.c: New file.
* config/pru/gtd.c: New file.
* config/pru/gtf.c: New file.
* config/pru/led.c: New file.
* config/pru/lef.c: New file.
* config/pru/lib2bitcountHI.c: New file.
* config/pru/lib2divHI.c: New file.
* config/pru/lib2divQI.c: New file.
* config/pru/lib2divSI.c: New file.
* config/pru/libgcc-eabi.ver: New file.
* config/pru/ltd.c: New file.
* config/pru/ltf.c: New file.
* config/pru/mpyll.S: New file.
* config/pru/pru-abi.h: New file.
* config/pru/pru-asm.h: New file.
* config/pru/pru-divmod.h: New file.
* config/pru/sfp-machine.h: New file.
* config/pru/t-pru: New file.
From-SVN: r272204
When libgcc is built on Darwin, it is usually built for the earliest potential
target (Darwin8, 10.4). Build for that revision default to assuming that the
processor might be G3 (without vector ops) and there is an outlined function
used for save/restore that checks whether the processor is G3 or G4+ at run-
time. However, the unwinder itself needs to be built with the assumption of
vector usage so that the relevant outlined functions are called.
2019-06-06 Iain Sandoe <iain@sandoe.co.uk>
* config/rs6000/t-darwin: Ensure that the unwinder is built with
altivec enabled.
From-SVN: r272017
* config/ia64/crtbegin.S (__dso_handle): Put in .sdata/.sbss
rather than .data/.bss so it can be accessed via gp-relative
addressing.
From-SVN: r271977
* config.gcc (rx-*-linux*): New target.
* config/rx/elf.opt: New file.
* config/rx/linux.h: Likewise.
* config/rx/t-linux: Likewise.
* config/rx/rx.c (TARGET_SAVE_ACC_REGISTER): If not defined,
make it zero.
* config/rx/rx.h (ASM_APP_ON): Allow to be overridden.
(ASM_APP_OFF): Likewise.
* config/rx/rx.opt: Drop -msim and -mas100-syntax, they were
moved elsewhere.
* config.host (rx-*-linux*): Add new case.
* config/rx/t-rx (HOST_LIBGCC2_CFLAGS): Force DFmode to SFmode.
From-SVN: r271748
This patch is updating all soft-fp from glibc, most changes are
copyright years update, and changes other than years update are
* soft-fp/extenddftf2.c: Use "_FP_W_TYPE_SIZE < 64" to check if
4_FP_W_TYPEs are used for IEEE quad precision.
* soft-fp/extendhftf2.c: Likewise.
* soft-fp/extendsftf2.c: Likewise.
* soft-fp/extendxftf2.c: Likewise.
* soft-fp/trunctfdf2.c: Likewise.
* soft-fp/trunctfhf2.c: Likewise.
* soft-fp/trunctfsf2.c: Likewise.
* soft-fp/trunctfxf2.c: Likewise.
* config/rs6000/ibm-ldouble.c: Likewise.
From-SVN: r271327
The asm file fails to build if we use a modern assembler
which checks that the machine is consistent with the
filetype. Fixed by adjusting in a similar manner to
other assembler.
libgcc/
2019-05-12 Iain Sandoe <iain@sandoe.co.uk>
* config/rs6000/darwin-vecsave.S: Set .machine appropriately.
From-SVN: r271111
libgcc/
* config/visium/lib2funcs.c (__set_trampoline_parity): Replace
TRAMPOLINE_SIZE with __LIBGCC_TRAMPOLINE_SIZE__.
gcc/
* final.c (insn_current_reference_address): Replace test on JUMP_P
with test on jump_to_label_p.
* config/visium/visium-passes.def: New file.
* config/visium/t-visium (PASSES_EXTRA): Define.
* config/visium/visium-protos.h (make_pass_visium_reorg): Declare.
* config/visium/visium.h (TRAMPOLINE_SIZE): Adjust.
(TRAMPOLINE_ALIGNMENT): Define.
* config/visium/visium.c (visium_option_override): Do not register
the machine-specific reorg pass here.
(visium_trampoline_init): Align the BRA insn on a 64-bit boundary
for the GR6.
(output_branch): Adjust threshold for long branch instruction.
* config/visium/visium.md (cpu): Move around.
(length): Adjust for the GR6.
From-SVN: r268931
FSTYPE FUNC (DWtype u) in libgcc2.c, which converts DI/TI to SF/DF, has
/* No leading bits means u == minimum. */
if (count == 0)
return -(Wtype_MAXp1_F * (Wtype_MAXp1_F / 2));
in the third case (where actually count == 0 only means the high part is
minimum). It should be:
/* No leading bits means u == minimum. */
if (count == 0)
return Wtype_MAXp1_F * (FSTYPE) (hi | ((UWtype) u != 0));
instead.
gcc/testsuite/
2019-01-23 H.J. Lu <hongjiu.lu@intel.com>
PR libgcc/88931
* gcc.dg/torture/fp-int-convert-timode-1.c: New test.
* gcc.dg/torture/fp-int-convert-timode-2.c: Likewise.
* gcc.dg/torture/fp-int-convert-timode-3.c: Likewise.
* gcc.dg/torture/fp-int-convert-timode-4.c: Likewise.
libgcc/
2019-01-23 Joseph Myers <joseph@codesourcery.com>
PR libgcc/88931
* libgcc2.c (FSTYPE FUNC (DWtype u)): Correct no leading bits
case.
From-SVN: r268216
2019-01-18 Martin Liska <mliska@suse.cz>
* libgcov-driver.c (gcov_version_string): New function.
(gcov_version): Convert version integer into string.
From-SVN: r268069
This patch contains the GCN port of libgcc.
2019-01-17 Andrew Stubbs <ams@codesourcery.com>
Kwok Cheung Yeung <kcy@codesourcery.com>
Julian Brown <julian@codesourcery.com>
Tom de Vries <tom@codesourcery.com>
libgcc/
* config.host: Recognize amdgcn*-*-amdhsa.
* config/gcn/crt0.c: New file.
* config/gcn/lib2-divmod-hi.c: New file.
* config/gcn/lib2-divmod.c: New file.
* config/gcn/lib2-gcn.h: New file.
* config/gcn/sfp-machine.h: New file.
* config/gcn/t-amdgcn: New file.
Co-Authored-By: Julian Brown <julian@codesourcery.com>
Co-Authored-By: Kwok Cheung Yeung <kcy@codesourcery.com>
Co-Authored-By: Tom de Vries <tom@codesourcery.com>
From-SVN: r268021
Softfloat single precision and double precision floating-point
multiplication routines in libgcc share some code with the
floating-point division of their corresponding precision. As the code
is structured now, this leads to *all* division code being pulled in an
executable in softfloat mode even if only multiplication is
performed.
This patch create some new LIB1ASMFUNCS macros to also build files with
just the multiplication and shared code as weak symbols. By putting
these earlier in the static library, they can then be picked up when
only multiplication is used and they are overriden by the global
definition in the existing file containing both multiplication and
division code when division is needed.
The patch also removes changes made to the FUNC_START and ARM_FUNC_START
macros in r218124 since the intent was to put multiplication and
division code into their own section in a later patch to achieve the
same size optimization. That approach relied on specific section layout
to ensure multiplication and division were not too far from the shared
bit of code in order to the branches to be within range. Due to lack of
guarantee regarding section layout, in particular with all the
possibility of linker scripts, this approach was chosen instead. This
patch keeps the two testcases that were posted by Tony Wang on the mailing
list to implement this approach and adds a new one.
2018-12-19 Thomas Preud'homme <thomas.preudhomme@linaro.org>
libgcc/
* /config/arm/lib1funcs.S (FUNC_START): Remove unused sp_section
parameter and corresponding code.
(ARM_FUNC_START): Likewise in both definitions.
Also update footer comment about condition that need to match with
gcc/config/arm/elf.h to also include libgcc/config/arm/t-arm.
* config/arm/ieee754-df.S (muldf3): Also build it if L_arm_muldf3 is
defined. Weakly define it in this case.
* config/arm/ieee754-sf.S (mulsf3): Likewise with L_arm_mulsf3.
* config/arm/t-elf (LIB1ASMFUNCS): Build _arm_muldf3.o and
_arm_mulsf3.o before muldiv versions if targeting Thumb-1 only. Add
comment to keep condition in sync with the one in
libgcc/config/arm/lib1funcs.S and gcc/config/arm/elf.h.
gcc/
* config/arm/elf.h: Update comment about condition that need to
match with libgcc/config/arm/lib1funcs.S to also include
libgcc/config/arm/t-arm.
* doc/sourcebuild.texi (output-exists, output-exists-not): Rename
subsubsection these directives are in to "Check for output files".
Move scan-symbol to that section and add to it new scan-symbol-not
directive.
2018-12-19 Tony Wang <tony.wang@arm.com>
Thomas Preud'homme <thomas.preudhomme@linaro.org>
gcc/testsuite/
* lib/lto.exp (lto-execute): Define output_file and testname_with_flags
to same value as execname.
(scan-symbol): Move and rename to ...
* lib/gcc-dg.exp (scan-symbol-common): This. Adapt into a
helper function returning true or false if a symbol is present.
(scan-symbol): New procedure.
(scan-symbol-not): Likewise.
* gcc.target/arm/size-optimization-ieee-1.c: New testcase.
* gcc.target/arm/size-optimization-ieee-2.c: Likewise.
* gcc.target/arm/size-optimization-ieee-3.c: Likewise.
From-SVN: r267282
Currently, .cfi_endproc and FUNC_END(__trampoline_setup) are placed
inside the #else branch of an "#if defined (__VXWORKS__) ...", so
non-pic vxworks does not get proper CFI nor a .size directive for
__trampoline_setup. I assume there's no magic reason for that (which
would warrant a comment), so move them outside.
From-SVN: r267051
There are a few places in libgcc assembly where we don't emit call
frame information for functions, potentially breaking unwinding from
asynchronous signal handlers. This patch fixes them. Although I
patch tramp.S there is no attempt made to provide CFI for the actual
trampoline on the stack. Doing that would require generating CFI at
run time and both registering and deregistering it, which is probably
not worth doing since it would significantly slow down the call.
* config/rs6000/morestack.S (__stack_split_initialize),
(__morestack_get_guard, __morestack_set_guard),
(__morestack_make_guard): Provide CFI covering these functions.
* config/rs6000/tramp.S (__trampoline_setup): Likewise.
From-SVN: r266503
2018-11-13 Xianmiao Qu <xianmiao_qu@c-sky.com>
libgcc/
* config/csky/linux-unwind.h (_sig_ucontext_t): Remove.
(csky_fallback_frame_state): Modify the check of the
instructions to adapt to changes in the kernel
From-SVN: r266060
This patch updates GCC to use autoconf 2.69 and automake 1.15.1.
(That's not the latest automake version, but it's the one used by
binutils-gdb, with which consistency is desirable, and in any case
seems a useful incremental update that should make a future update to
1.16.1 easier.)
The changes are generally similar to the binutils-gdb ones, and are
copied from there where shared files and directories are involved
(there are some further changes to such shared directories, however,
which I'd expect to apply to binutils-gdb once this patch is in GCC).
Largely, obsolete AC_PREREQ calls are removed, while many
AC_LANG_SOURCE calls are added to avoid warnings from aclocal and
autoconf. Multilib support is no longer included in core automake,
meaning that multilib.am needs copying from automake's contrib
directory into the GCC source tree. Autoconf 2.69 has Go support, so
local copies of that support are removed. I hope the D support will
soon be submitted to upstream autoconf so the local copy of that can
be removed in a future update. Changes to how automake generates
runtest calls mean quotes are removed from RUNTEST definitions in five
lib*/testsuite/Makefile.am files (libatomic, libgomp, libitm,
libphobos, libvtv; some others have RUNTEST definitions without
quotes, which are still OK); libgo and libphobos also get
-Wno-override added to AM_INIT_AUTOMAKE so those overrides of RUNTEST
do not generate automake warnings.
Note that the regeneration did not include regeneration of
fixincludes/config.h.in (attempting such regeneration resulted in all
the USED_FOR_TARGET conditionals disappearing; and I don't see
anything in the fixincludes/ directory that would result in such
conditionals being generated, unlike in the gcc/ directory). Also
note that libvtv/testsuite/other-tests/Makefile.in was not
regenerated; that directory is not listed as a subdirectory for which
Makefile.in gets regenerated by calling "automake" in libvtv/, so I'm
not sure how it's meant to be regenerated.
While I mostly fixed warnings should running aclocal / automake /
autoconf, there were various such warnings from automake in the
libgfortran, libgo, libgomp, liboffloadmic, libsanitizer, libphobos
directories that I did not fix, preferring to leave those to the
relevant subsystem maintainers. Specifically, most of those warnings
were of the following form (example from libgfortran):
Makefile.am:48: warning: source file 'caf/single.c' is in a subdirectory,
Makefile.am:48: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they
will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
I think it's best for the relevant maintainers to add subdir-objects
and do any other associated Makefile.am changes needed. In some cases
the paths in the warnings involved ../; I don't know if that adds any
extra complications to the use of subdir-objects.
I've tested this with native, cross and Canadian cross builds. The
risk of any OS-specific issues should I hope be rather lower than if a
libtool upgrade were included (we *should* do such an upgrade at some
point, but it's more complicated - it involves identifying all our
local libtool changes to see if any aren't included in the upstream
version we update to, and reverting an upstream libtool patch that's
inappropriate for use in GCC); I think it would be better to get this
update into GCC so that people can test in different configurations
and we can fix any issues found, rather than to try to get more and
more testing done before it goes in.
top level:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* multilib.am: New file. From automake.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
* ar-lib: New file.
* test-driver: New file.
* configure: Re-generate.
config:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* math.m4, tls.m4: Use AC_LANG_SOURCE.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
fixincludes:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* aclocal.m4, configure: Regenerate.
gcc:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use single
line for second argument of AC_DEFINE_UNQUOTED.
* doc/install.texi (Tools/packages necessary for modifying GCC):
Update to autoconf 2.69 and automake 1.15.1.
* aclocal.m4, config.in, configure: Regenerate.
gnattools:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* configure: Regenerate.
gotools:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* config/go.m4: Remove file.
* Makefile.am (ACLOCAL_AMFLAGS): Do not use -I ./config.
* configure.ac: Remove AC_PREREQ. Do not include config/go.m4.
* Makefile.in, aclocal.m4, configure: Regenerate.
intl:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ.
* configure: Re-generate.
* config.h.in: Re-generate.
* aclocal.m4: Re-generate.
libada:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* configure: Regenerate.
libatomic:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* acinclude.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libbacktrace:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
libcc1:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure: Regenerate.
libcpp:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* aclocal.m4, config.in, configure: Regenerate.
libdecnumber:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* aclocal.m4.
libffi:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
(CLEANFILES): Remove doc/libffi.info.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure, fficonfig.h.in,
include/Makefile.in, man/Makefile.in, testsuite/Makefile.in:
Regenerate.
libgcc:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* configure: Regenerate.
libgfortran:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
libgo [logically part of this change but omitted from the commit]:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* config/go.m4: Remove file.
* config/libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use
-Wno-override in AM_INIT_AUTOMAKE call.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libgomp:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am
(AUTOMAKE_OPTIONS): Add info-in-builddir.
(CLEANFILES): Remove libgomp.info.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libhsail-rt:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure: Regenerate.
libiberty:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* config.in: Re-generate.
libitm:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
(CLEANFILES): Remove libitm.info.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libobjc:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* aclocal.m4, config.h.in, configure: Regenerate.
liboffloadmic:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* plugin/Makefile.am: Include multilib.am.
* plugin/configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure, plugin/Makefile.in,
plugin/aclocal.m4, plugin/configure: Regenerate.
libphobos:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ. Use -Wno-override in
AM_INIT_AUTOMAKE call.
* m4/autoconf.m4: Add extra argument to AC_LANG_DEFINE call.
* m4/druntime/os.m4: Use AC_LANG_SOURCE.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, libdruntime/Makefile.in,
src/Makefile.in, testsuite/Makefile.in: Regenerate.
libquadmath:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Remove 1.8. Add info-in-builddir.
(all-local): Define outside conditional code.
(CLEANFILES): Remove libquadmath.info.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
libsanitizer:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* Makefile.in, aclocal.m4, asan/Makefile.in, configure,
interception/Makefile.in, libbacktrace/Makefile.in,
lsan/Makefile.in, sanitizer_common/Makefile.in, tsan/Makefile.in,
ubsan/Makefile.in: Regenerate.
libssp:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Remove 1.9.5.
* configure.ac: Remove AC_PREREQ. Quote argument to
AC_RUN_IFELSE.
* Makefile.in, aclocal.m4, configure: Regenerate.
libstdc++-v3:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure, doc/Makefile.in,
include/Makefile.in, libsupc++/Makefile.in, po/Makefile.in,
python/Makefile.in, src/Makefile.in, src/c++11/Makefile.in,
src/c++17/Makefile.in, src/c++98/Makefile.in,
src/filesystem/Makefile.in, testsuite/Makefile.in: Regenerate.
libvtv:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
lto-plugin:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
zlib:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Modernize AC_INIT call, remove AC_PREREQ.
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
From-SVN: r265695
Just as one needs run-time initialization of mutexes, one needs to
destroy them properly to allow the OS to release resources associated
with the semaphore.
From-SVN: r265616
2018-10-24 Martin Liska <mliska@suse.cz>
* cgraph.c (cgraph_node::dump):
Remove reduntant dumps and make tp_first_run dump more compact.
2018-10-24 Martin Liska <mliska@suse.cz>
* libgcov-profiler.c: Start from 1 in order to distinguish
functions which were seen and these that were not.
From-SVN: r265454
* udivmodsi4.c (__udivmodsi4): Rename to conform to coding
standard.
* divmod.c: Update references to __udivmodsi4.
* udivmod.c: Ditto.
* udivhi3.c: New file.
* udivmodhi4.c: New file.
* config/pdp11/t-pdp11 (LIB2ADD): Add the new files.
From-SVN: r265277
One target file (config/c6x/t-elf) lists _printf and _gcc_bcmp in
LIB2FUNCS_EXCLUDE, but that does not have any effect, since those are
not filtered away from LIB2FUNCS_ST. Another option is to do as in
config/rl78/t-rl78, which explicitly sets LIB2FUNCS_ST
# Remove __gcc_bcmp from LIB2FUNCS_ST
LIB2FUNCS_ST = _eprintf
but honouring LIB2FUNCS_EXCLUDE also for LIB2FUNCS_ST seems more
natural.
From-SVN: r265246
2018-10-12 Olivier Hainque <hainque@adacore.com>
* config/rs6000/ibm-ldouble.c: Augment the toplevel guard with
defined (__FLOAT128_TYPE__) || defined (__LONG_DOUBLE_128__).
From-SVN: r265135
2018-10-04 Martin Liska <mliska@suse.cz>
PR gcov-profile/84107
* tree-profile.c (init_ic_make_global_vars):
Remove ic_void_ptr_var and ic_gcov_type_ptr_var.
Come up with new ic_tuple* variables. Emit
__gcov_indirect_call{,_topn} variables.
(gimple_gen_ic_profiler): Access the variable
and emit gimple.
(gimple_gen_ic_func_profiler): Access
__gcov_indirect_call.callee field.
(gimple_init_gcov_profiler): Use ptr_type_node.
* value-prof.c (gimple_ic): Use ptr_type_node.
2018-10-04 Martin Liska <mliska@suse.cz>
PR gcov-profile/84107
* libgcov-profiler.c (__gcov_indirect_call):
Change type to indirect_call_tuple.
(struct indirect_call_tuple): New struct.
(__gcov_indirect_call_topn_profiler): Change type.
(__gcov_indirect_call_profiler_v2): Use the new
variables.
* libgcov.h (struct indirect_call_tuple): New struct
definition.
From-SVN: r264840
2018-09-21 Martin Liska <mliska@suse.cz>
* auto-profile.c (autofdo_source_profile::read): Do not
set sum_all.
(read_profile): Do not add working sets.
(read_autofdo_file): Remove sum_all.
(afdo_callsite_hot_enough_for_early_inline): Remove const
qualifier.
* coverage.c (struct counts_entry): Remove gcov_summary.
(read_counts_file): Read new GCOV_TAG_OBJECT_SUMMARY,
do not support GCOV_TAG_PROGRAM_SUMMARY.
(get_coverage_counts): Remove summary and expected
arguments.
* coverage.h (get_coverage_counts): Likewise.
* doc/gcov-dump.texi: Remove -w option.
* gcov-dump.c (dump_working_sets): Remove.
(main): Do not support '-w' option.
(print_usage): Likewise.
(tag_summary): Likewise.
* gcov-io.c (gcov_write_summary): Do not dump
histogram.
(gcov_read_summary): Likewise.
(gcov_histo_index): Remove.
(gcov_histogram_merge): Likewise.
(compute_working_sets): Likewise.
* gcov-io.h (GCOV_TAG_OBJECT_SUMMARY): Mark
it not obsolete.
(GCOV_TAG_PROGRAM_SUMMARY): Mark it obsolete.
(GCOV_TAG_SUMMARY_LENGTH): Adjust.
(GCOV_HISTOGRAM_SIZE): Remove.
(GCOV_HISTOGRAM_BITVECTOR_SIZE): Likewise.
(struct gcov_summary): Simplify rapidly just
to runs and sum_max fields.
(gcov_histo_index): Remove.
(NUM_GCOV_WORKING_SETS): Likewise.
(compute_working_sets): Likewise.
* gcov-tool.c (print_overlap_usage_message): Remove
trailing empty line.
* gcov.c (read_count_file): Read GCOV_TAG_OBJECT_SUMMARY.
(output_lines): Remove program related line.
* ipa-profile.c (ipa_profile): Do not consider GCOV histogram.
* lto-cgraph.c (output_profile_summary): Do not stream GCOV
histogram.
(input_profile_summary): Do not read it.
(merge_profile_summaries): And do not merge it.
(input_symtab): Do not call removed function.
* modulo-sched.c (sms_schedule): Do not print sum_max.
* params.def (HOT_BB_COUNT_FRACTION): Reincarnate param that was
removed when histogram method was invented.
(HOT_BB_COUNT_WS_PERMILLE): Mention that it's used only in LTO
mode.
* postreload-gcse.c (eliminate_partially_redundant_load): Fix
GCOV coding style.
* predict.c (get_hot_bb_threshold): Use HOT_BB_COUNT_FRACTION
and dump selected value.
* profile.c (add_working_set): Remove.
(get_working_sets): Likewise.
(find_working_set): Likewise.
(get_exec_counts): Do not work with working sets.
(read_profile_edge_counts): Do not inform as sum_max is removed.
(compute_branch_probabilities): Likewise.
(compute_value_histograms): Remove argument for call of
get_coverage_counts.
* profile.h: Do not make gcov_summary const.
2018-09-21 Martin Liska <mliska@suse.cz>
* libgcov-driver.c (crc32_unsigned): Remove.
(gcov_histogram_insert): Likewise.
(gcov_compute_histogram): Likewise.
(compute_summary): Simplify rapidly.
(merge_one_data): Do not handle PROGRAM_SUMMARY tag.
(merge_summary): Rapidly simplify.
(dump_one_gcov): Ignore gcov_summary.
(gcov_do_dump): Do not handle program summary, it's not
used.
* libgcov-util.c (tag_summary): Remove.
(read_gcda_finalize): Fix coding style.
(read_gcda_file): Initialize curr_object_summary.
(compute_summary): Remove.
(calculate_overlap): Remove settings of run_max.
From-SVN: r264462
The AArch32 instruction sets prior to Armv7 do not define the ISB and
DSB instructions that are needed to form a speculation barrier. While
I do not know of any instances of cores based on those instruction
sets being vulnerable to speculative side channel attacks it is
possible to run code built for those ISAs on more recent hardware
where they would become vulnerable.
This patch works around this by using a library call added to libgcc.
That code can then take any platform-specific actions necessary to
ensure safety.
For the moment I've only handled two cases: the library code being
built for armv7 or later anyway and running on Linux.
On Linux we can handle this by calling the kernel function that will
flush a small amount of cache. Such a sequence ends with a ISB+DSB
sequence if running on an Armv7 or later CPU.
gcc:
PR target/86951
* config/arm/arm-protos.h (arm_emit_speculation_barrier): New
prototype.
* config/arm/arm.c (speculation_barrier_libfunc): New static
variable.
(arm_init_libfuncs): Initialize it.
(arm_emit_speculation_barrier): New function.
* config/arm/arm.md (speculation_barrier): Call
arm_emit_speculation_barrier for architectures that do not have
DSB or ISB.
(speculation_barrier_insn): Only match on Armv7 or later.
libgcc:
PR target/86951
* config/arm/lib1funcs.asm (speculation_barrier): New function.
* config/arm/t-arm (LIB1ASMFUNCS): Add it to list of functions
to build.
From-SVN: r263806
In order to allow ZCX on VxWorks, we need the frame_dummy function to do
the register_frame_info(). So make sure crtbegin.o and crtend.o are
available for use with a custom spec file.
From-SVN: r263690
2018-08-01 Martin Liska <mliska@suse.cz>
* libgcov-profiler.c (__gcov_indirect_call_profiler_v2): Do not
check that __gcov_indirect_call_callee is non-null.
From-SVN: r263202
CET kernel has been changed to place a restore token on shadow stack for
signal handler to enhance security. It is usually transparent to user
programs since kernel will pop the restore token when signal handler
returns. But when an exception is thrown from a signal handler, now
we need to remove _Unwind_Frames_Increment to pop the the restore token
from shadow stack. Otherwise, we get
FAIL: g++.dg/torture/pr85334.C -O0 execution test
FAIL: g++.dg/torture/pr85334.C -O1 execution test
FAIL: g++.dg/torture/pr85334.C -O2 execution test
FAIL: g++.dg/torture/pr85334.C -O3 -g execution test
FAIL: g++.dg/torture/pr85334.C -Os execution test
FAIL: g++.dg/torture/pr85334.C -O2 -flto -fno-use-linker-plugin -flto-partition=none execution test
PR libgcc/85334
* config/i386/shadow-stack-unwind.h (_Unwind_Frames_Increment):
Removed.
From-SVN: r263030
For some targets (in my case VxWorks 5.5), libgcov does not compile due
to missing functions and macros such as getpid() and F_OK.
Incidentally, gcc/Makefile.in already contains comments such as
# Install gcov if it was compiled.
but there is no logic in place to actually allow gcov to not be
compiled.
So add an option for disabling build and install of libgcov and the
related host tools.
From-SVN: r262180
libgcc/:
PR libgcc/86213
* generic-morestack.c (allocate_segment): Move calls to getenv and
getpagesize to __morestack_load_mmap.
(__morestack_load_mmap) Initialize static_pagesize and
use_guard_page here so as to avoid clobbering SSE regs during a
__morestack call.
gcc/testsuite/:
* gcc.dg/split-8.c: New.
From-SVN: r261823
[gcc]
2018-06-18 Michael Meissner <meissner@linux.ibm.com>
PR target/85358
* config/rs6000/rs6000-modes.def (toplevel): Rework the 128-bit
floating point modes, so that IFmode is numerically greater than
TFmode, which is greater than KFmode using FRACTIONAL_FLOAT_MODE
to declare the ordering. This prevents IFmode from being
converted to TFmode when long double is IEEE 128-bit on an ISA 3.0
machine. Include rs6000-modes.h to share the fractional values
between genmodes* and the rest of the compiler.
(IFmode): Likewise.
(KFmode): Likewise.
(TFmode): Likewise.
* config/rs6000/rs6000-modes.h: New file.
* config/rs6000/rs6000.c (rs6000_debug_reg_global): Change the
meaning of rs6000_long_double_size so that 126..128 selects an
appropriate 128-bit floating point type.
(rs6000_option_override_internal): Likewise.
* config/rs6000/rs6000.h (toplevel): Include rs6000-modes.h.
(TARGET_LONG_DOUBLE_128): Change the meaning of
rs6000_long_double_size so that 126..128 selects an appropriate
128-bit floating point type.
(LONG_DOUBLE_TYPE_SIZE): Update comment.
* config/rs6000/rs6000.md (trunciftf2): Correct the modes of the
source and destination to match the standard usage.
(truncifkf2): Likewise.
(copysign<mode>3, IEEE iterator): Rework copysign of float128 on
ISA 2.07 to use an explicit clobber, instead of passing in a
temporary.
(copysign<mode>3_soft): Likewise.
[libgcc]
2018-06-18 Michael Meissner <meissner@linux.ibm.com>
* config/rs6000/t-float128 (FP128_CFLAGS_SW): Compile float128
support modules with -mno-gnu-attribute.
* config/rs6000/t-float128-hw (FP128_CFLAGS_HW): Likewise.
From-SVN: r261712
2018-06-07 Olivier Hainque <hainque@adacore.com>
* config/t-vxworks (LIBGCC_INCLUDES): Add
-I$(MULTIBUILDTOP)../../gcc/include.
* config/t-vxworks7: Likewise. Reformat a bit to match
the t-vxworks layout.
From-SVN: r261273
2018-06-07 Martin Liska <mliska@suse.cz>
PR bootstrap/86057
* libgcov-driver-system.c (replace_filename_variables): Use
memcpy instead of mempcpy.
(allocate_filename_struct): Do not allocate filename, allocate
prefix and set it.
(gcov_exit_open_gcda_file): Allocate memory for gf->filename
here and properly copy content into it.
* libgcov-driver.c (struct gcov_filename): Remove max_length
field, change prefix from size_t into char *.
(compute_summary): Do not calculate longest filename.
(gcov_do_dump): Release memory of gf.filename after each file.
* libgcov-util.c (compute_summary): Use new signature of
compute_summary.
(calculate_overlap): Likewise.
From-SVN: r261260
2018-06-05 Martin Liska <mliska@suse.cz>
PR gcov-profile/47618
* doc/invoke.texi: Document how -fprofile-dir format
is extended.
2018-06-05 Martin Liska <mliska@suse.cz>
PR gcov-profile/47618
* libgcov-driver-system.c (replace_filename_variables): New
function.
(gcov_exit_open_gcda_file): Use it.
From-SVN: r261199
2018-06-05 Martin Liska <mliska@suse.cz>
* auto-profile.c (read_autofdo_file): Do not use
gcov_ctr_summary struct.
(afdo_callsite_hot_enough_for_early_inline): Likewise.
* coverage.c (struct counts_entry): Likewise.
(read_counts_file): Read just single summary entry.
(get_coverage_counts): Use gcov_summary struct.
* coverage.h (get_coverage_counts): Likewise.
* gcov-dump.c (dump_working_sets): Likewise.
(tag_summary): Dump just single summary.
* gcov-io.c (gcov_write_summary): Write just histogram
summary.
(gcov_read_summary): Read just single summary.
(compute_working_sets): Use gcov_summary struct.
* gcov-io.h (GCOV_TAG_SUMMARY_LENGTH): Remove usage
of GCOV_COUNTERS_SUMMABLE.
(GCOV_COUNTERS_SUMMABLE): Remove.
(GCOV_FIRST_VALUE_COUNTER): Replace with
GCOV_COUNTER_V_INTERVAL.
(struct gcov_ctr_summary): Remove.
(struct gcov_summary): Directly use fields of former
gcov_ctr_summary.
(compute_working_sets): Use gcov_summary struct.
* gcov.c (read_count_file): Do not use ctrs fields.
* lto-cgraph.c (merge_profile_summaries): Use gcov_summary
struct.
* lto-streamer.h (struct GTY): Make profile_info gcov_summary
struct.
* profile.c: Likewise.
* profile.h: Likewise.
2018-06-05 Martin Liska <mliska@suse.cz>
* libgcov-driver.c (gcov_compute_histogram): Remove usage
of gcov_ctr_summary.
(compute_summary): Do it just for a single summary.
(merge_one_data): Likewise.
(merge_summary): Simplify as we read just single summary.
(dump_one_gcov): Pass proper argument.
* libgcov-util.c (compute_one_gcov): Simplify as we have just
single summary.
(gcov_info_count_all_cold): Likewise.
(calculate_overlap): Likewise.
From-SVN: r261189
2018-05-29 Martin Liska <mliska@suse.cz>
PR gcov-profile/85759
* doc/gcov.texi: Document GCOV_ERROR_FILE and GCOV_EXIT_AT_ERROR
env variables.
2018-05-29 Martin Liska <mliska@suse.cz>
PR gcov-profile/85759
* libgcov-driver-system.c (gcov_error): Introduce usage of
GCOV_EXIT_AT_ERROR env. variable.
* libgcov-driver.c (merge_one_data): Print error that we
overwrite a gcov file with a different timestamp.
From-SVN: r260895
The -march=armv5 and armv5e options have been deprecated in GCC 7 [1].
This patch removes support for them.
It's mostly mechanical stuff. The functionality that was previously
gated on arm_arch5 is now gated on arm_arch5t and the functionality
that was gated on arm_arch5e is now gated on arm_arch5te.
A path in TARGET_OS_CPP_BUILTINS for VxWorks is now unreachable and
therefore is deleted.
References to armv5 and armv5e are deleted/updated throughout the
source tree and testsuite.
Bootstrapped and tested on arm-none-linux-gnueabihf.
Also built a cc1 for arm-wrs-vxworks as a sanity check.
* config/arm/arm-cpus.in (armv5, armv5e): Delete features.
(armv5t, armv5te): New features.
(ARMv5, ARMv5e): Delete fgroups.
(ARMv5t, ARMv5te): Adjust for above changes.
(ARMv6m): Likewise.
(armv5, armv5e): Delete arches.
* config/arm/arm.md (*call_reg_armv5): Use arm_arch5t instead of
arm_arch5.
(*call_reg_arm): Likewise.
(*call_value_reg_armv5): Likewise.
(*call_value_reg_arm): Likewise.
(*call_symbol): Likewise.
(*call_value_symbol): Likewise.
(*sibcall_insn): Likewise.
(*sibcall_value_insn): Likewise.
(clzsi2): Likewise.
(prefetch): Likewise.
(define_split and define_peephole2 dependent on arm_arch5):
Likewise.
* config/arm/arm.h (TARGET_LDRD): Use arm_arch5te instead of
arm_arch5e.
(TARGET_ARM_QBIT): Likewise.
(TARGET_DSP_MULTIPLY): Likewise.
(enum base_architecture): Delete BASE_ARCH_5, BASE_ARCH_5E.
(arm_arch5, arm_arch5e): Delete.
(arm_arch5t, arm_arch5te): Declare.
* config/arm/arm.c (arm_arch5, arm_arch5e): Delete.
(arm_arch5t): Declare.
(arm_option_reconfigure_globals): Update for the above.
(arm_options_perform_arch_sanity_checks): Update comment, replace
use of arm_arch5 with arm_arch5t.
(use_return_insn): Likewise.
(arm_emit_call_insn): Likewise.
(output_return_instruction): Likewise.
(arm_final_prescan_insn): Likewise.
(arm_coproc_builtin_available): Likewise.
* config/arm/arm-c.c (arm_cpu_builtins): Replace arm_arch5 and
arm_arch5e with arm_arch5t and arm_arch5te.
* config/arm/arm-protos.h (arm_arch5, arm_arch5e): Delete.
(arm_arch5t, arm_arch5te): Declare.
* config/arm/arm-tables.opt: Regenerate.
* config/arm/t-arm-elf: Remove references to armv5, armv5e.
* config/arm/t-multilib: Likewise.
* config/arm/thumb1.md (*call_reg_thumb1_v5): Check arm_arch5t
instead of arm_arch5.
(*call_reg_thumb1): Likewise.
(*call_value_reg_thumb1_v5): Likewise.
(*call_value_reg_thumb1): Likewise.
* config/arm/vxworks.h (TARGET_OS_CPP_BUILTINS): Remove now
unreachable path.
* doc/invoke.texi (ARM Options): Remove references to armv5, armv5e.
* gcc.target/arm/pr40887.c: Update comment.
* lib/target-supports.exp: Don't generate effective target checks
and related helpers for armv5. Update comment.
* gcc.target/arm/armv5_thumb_isa.c: Delete.
* gcc.target/arm/di-longlong64-sync-withhelpers.c: Update effective
target check and options.
* config/arm/libunwind.S: Update comment relating to armv5.
From-SVN: r260362
[libgcc]
2018-04-20 Michael Meissner <meissner@linux.ibm.com>
PR target/85456
* config/rs6000/_powikf2.c: New file. Add support for the
__builtin_powil function when long double is IEEE 128-bit floating
point.
* config/rs6000/float128-ifunc.c (__powikf2_resolve): Add
__powikf2 support.
(__powikf2): Likewise.
* config/rs6000/quad-float128.h (__powikf2_sw): Likewise.
(__powikf2_hw): Likewise.
(__powikf2): Likewise.
* config/rs6000/t-float128 (fp128_ppc_funcs): Likewise.
* config/rs6000/t-float128-hw (fp128_hw_func): Likewise.
(_powikf2-hw.c): Likewise.
[gcc]
2018-04-20 Michael Meissner <meissner@linux.ibm.com>
PR target/85456
* config/rs6000/rs6000.c (init_float128_ieee): Add support to call
__powikf2 when long double is IEEE 128-bit.
[gcc/testsuite]
2018-04-20 Michael Meissner <meissner@linux.ibm.com>
PR target/85456
* gcc.target/powerpc/pr85456.c: New test.
From-SVN: r259533
When -fcf-protection -mcet is used, I got
FAIL: g++.dg/eh/sighandle.C
(gdb) bt
#0 _Unwind_RaiseException (exc=exc@entry=0x416ed0)
at /export/gnu/import/git/sources/gcc/libgcc/unwind.inc:140
#1 0x00007ffff7d9936b in __cxxabiv1::__cxa_throw (obj=<optimized out>,
tinfo=0x403dd0 <typeinfo for int@@CXXABI_1.3>, dest=0x0)
at /export/gnu/import/git/sources/gcc/libstdc++-v3/libsupc++/eh_throw.cc:90
#2 0x0000000000401255 in sighandler (signo=11, si=0x7fffffffd6f8,
uc=0x7fffffffd5c0)
at /export/gnu/import/git/sources/gcc/gcc/testsuite/g++.dg/eh/sighandle.C:9
#3 <signal handler called> <<<< Signal frame which isn't on shadow stack
#4 dosegv ()
at /export/gnu/import/git/sources/gcc/gcc/testsuite/g++.dg/eh/sighandle.C:14
#5 0x00000000004012e3 in main ()
at /export/gnu/import/git/sources/gcc/gcc/testsuite/g++.dg/eh/sighandle.C:30
(gdb) p frames
$6 = 5
(gdb)
frame count should be 4, not 5. This patch skips signal frames when
unwinding shadow stack.
gcc/testsuite/
PR libgcc/85334
* g++.dg/torture/pr85334.C: New test.
libgcc/
PR libgcc/85334
* unwind-generic.h (_Unwind_Frames_Increment): New.
* config/i386/shadow-stack-unwind.h (_Unwind_Frames_Increment):
Likewise.
* unwind.inc (_Unwind_RaiseException_Phase2): Increment frame
count with _Unwind_Frames_Increment.
(_Unwind_ForcedUnwind_Phase2): Likewise.
From-SVN: r259502
Program received signal SIGSEGV, Segmentation fault.
__stack_split_initialize ()
at /export/gnu/import/git/sources/gcc/libgcc/config/i386/morestack.S:751
751 leaq -16000(%rsp),%rax # We should have at least 16K.
Missing separate debuginfos, use: dnf debuginfo-install libgcc-8.0.1-0.21.0.fc28.x86_64
(gdb) disass
Dump of assembler code for function __stack_split_initialize:
=> 0x0000000000402858 <+0>: lea -0x3e80(%rsp),%rax
0x0000000000402860 <+8>: mov %rax,%fs:0x70
0x0000000000402869 <+17>: sub $0x8,%rsp
0x000000000040286d <+21>: mov %rsp,%rdi
0x0000000000402870 <+24>: mov $0x3e80,%esi
0x0000000000402875 <+29>: callq 0x401810 <__generic_morestack_set_initial_sp>
0x000000000040287a <+34>: add $0x8,%rsp
0x000000000040287e <+38>: retq
End of assembler dump.
(gdb)
This patch adds the missing ENDBR to __stack_split_initialize.
PR libgcc/85379
* config/i386/morestack.S (__stack_split_initialize): Add
_CET_ENDBR.
From-SVN: r259497
* config/cet.m4 (GCC_CET_FLAGS): Default to --disable-cet, replace
--enable-cet=default with --enable-cet=auto.
* doc/install.texi: Document --disable-cet being the default and
--enable-cet=auto.
* configure: Regenerated.
From-SVN: r259487
PR jit/85384
* acx.m4 (GCC_BASE_VER): Remove \$\$ from sed expression.
* configure.ac (gcc-driver-name.h): Honor --with-gcc-major-version
by using gcc_base_ver to generate a gcc_driver_version, and use
it when generating GCC_DRIVER_NAME.
* configure: Regenerate.
* configure: Regenerate.
From-SVN: r259462
PR target/84945
* config/i386/cpuinfo.c (set_feature): Wrap into do while (0) to avoid
-Wdangling-else warnings. Mask shift counts to avoid
-Wshift-count-negative and -Wshift-count-overflow false positives.
From-SVN: r259398
Enable AVX and AVX512 features only if their states are supported by
OSXSAVE.
PR target/85100
* config/i386/cpuinfo.c (XCR_XFEATURE_ENABLED_MASK): New.
(XSTATE_FP): Likewise.
(XSTATE_SSE): Likewise.
(XSTATE_YMM): Likewise.
(XSTATE_OPMASK): Likewise.
(XSTATE_ZMM): Likewise.
(XSTATE_HI_ZMM): Likewise.
(XCR_AVX_ENABLED_MASK): Likewise.
(XCR_AVX512F_ENABLED_MASK): Likewise.
(get_available_features): Enable AVX and AVX512 features only
if their states are supported by OSXSAVE.
From-SVN: r258954
PR target/84945
* config/i386/i386.c (fold_builtin_cpu): For features above 31
use __cpu_features2 variable instead of __cpu_model.__cpu_features[0].
Use 1U instead of 1. Formatting fixes.
* gcc.target/i386/pr84945.c: New test.
* config/i386/cpuinfo.h (__cpu_features2): Declare.
* config/i386/cpuinfo.c (__cpu_features2): New variable for
ifndef SHARED only.
(set_feature): Define.
(get_available_features): Use set_feature macro. Set __cpu_features2
to the second word of features ifndef SHARED.
From-SVN: r258673
PR debug/83917
* configure.ac (AS_HIDDEN_DIRECTIVE): AC_DEFINE_UNQUOTED this to
$asm_hidden_op if visibility ("hidden") attribute works.
(HAVE_AS_CFI_SECTIONS): New AC_DEFINE.
* config/i386/i386-asm.h: Don't include auto-host.h.
(PACKAGE_VERSION, PACKAGE_NAME, PACKAGE_STRING, PACKAGE_TARNAME,
PACKAGE_URL): Don't undefine.
(USE_GAS_CFI_DIRECTIVES): Don't use nor define this macro, instead
guard cfi_startproc only on ifdef __GCC_HAVE_DWARF2_CFI_ASM.
(FN_HIDDEN): Change guard from #ifdef HAVE_GAS_HIDDEN to
#ifdef AS_HIDDEN_DIRECTIVE, use AS_HIDDEN_DIRECTIVE macro in the
definition instead of hardcoded .hidden.
* config/i386/cygwin.S: Include i386-asm.h first before .cfi_sections
directive. Use #ifdef HAVE_AS_CFI_SECTIONS rather than
#ifdef HAVE_GAS_CFI_SECTIONS_DIRECTIVE to guard .cfi_sections.
(USE_GAS_CFI_DIRECTIVES): Don't define.
* configure: Regenerated.
* config.in: Likewise.
From-SVN: r258057
PR debug/83917
* config/i386/i386-asm.h (PACKAGE_VERSION, PACKAGE_NAME,
PACKAGE_STRING, PACKAGE_TARNAME, PACKAGE_URL): Undefine between
inclusion of auto-target.h and auto-host.h.
(USE_GAS_CFI_DIRECTIVES): Define if not defined already based on
__GCC_HAVE_DWARF2_CFI_ASM.
(cfi_startproc, cfi_endproc, cfi_adjust_cfa_offset,
cfi_def_cfa_register, cfi_def_cfa, cfi_register, cfi_offset, cfi_push,
cfi_pop): Define.
* config/i386/cygwin.S: Don't include auto-host.h here, just
define USE_GAS_CFI_DIRECTIVES to 1 or 0 and include i386-asm.h.
(cfi_startproc, cfi_endproc, cfi_adjust_cfa_offset,
cfi_def_cfa_register, cfi_register, cfi_push, cfi_pop): Remove.
* config/i386/resms64fx.h: Add cfi_* directives.
* config/i386/resms64x.h: Likewise.
From-SVN: r258010
ENDBR32 and RDSSPD are multi-byte NOPs on x86-64 processors and
newer x86 processors, starting Pentium Pro. They are UD on older
32-bit processors. Detect this at configure time and adjust the
default value for enable_cet. GCC will enable CET in 32-bit run-time
libraries in any case if --enable-cet is used to configure GCC.
PR target/84148
* config/cet.m4: Check if target support multi-byte NOPS (SSE).
* libatomic/configure: Regenerate.
* libbacktrace/configure: Likewise.
* libgcc/configure: Likewise.
* libgfortran/configure: Likewise.
* libgomp/configure: Likewise.
* libitm/configure: Likewise.
* libmpx/configure: Likewise.
* libobjc/configure: Likewise.
* libquadmath/configure: Likewise.
* libsanitizer/configure: Likewise.
* libssp/configure: Likewise.
* libstdc++-v3/configure: Likewise.
* libvtv/configure: Likewise.
From-SVN: r257809
Introduce a couple of new CET intrinsics for reading and updating a
shadow stack pointer (_get_ssp and _inc_ssp). They replace the existing
_rdssp[d|q] and _incssp[d|q] instrinsics.
PR target/84239
* gcc/config/i386/cetintrin.h: Remove _rdssp[d|q] and
add _get_ssp intrinsics. Remove argument from
__builtin_ia32_rdssp[d|q].
* gcc/config/i386/i386-builtin-types.def: Add UINT_FTYPE_VOID.
* gcc/config/i386/i386-builtin.def: Remove argument from
__builtin_ia32_rdssp[d|q].
* gcc/config/i386/i386.c: Use UINT_FTYPE_VOID. Use
ix86_expand_special_args_builtin for _rdssp[d|q].
* gcc/config/i386/i386.md: Remove argument from rdssp[si|di] insn.
Clear register before usage.
* doc/extend.texi: Remove argument from __builtin_ia32_rdssp[d|q].
Add documentation for new _get_ssp and _inc_ssp intrinsics.
* testsuite/gcc.target/i386/cet-intrin-3.c: Use new _get_ssp and
_inc_ssp intrinsics.
* testsuite/gcc.target/i386/cet-intrin-4.c: Likewise.
* testsuite/gcc.target/i386/cet-rdssp-1.c: Remove argument from
__builtin_ia32_rdssp[d|q].
* libgcc/config/i386/shadow-stack-unwind.hi (_Unwind_Frames_Extra):
Use new _get_ssp and _inc_ssp intrinsics.
From-SVN: r257660
libgcc/
2018-01-23 Max Filippov <jcmvbkbc@gmail.com>
* config/xtensa/ieee754-df.S (__addsf3, __subsf3, __mulsf3)
(__divsf3): Make NaN return value quiet.
* config/xtensa/ieee754-sf.S (__adddf3, __subdf3, __muldf3)
(__divdf3): Make NaN return value quiet.
From-SVN: r257002
This patch adds support for unwinding frames that use the SVE
pseudo VG register. We want this register to act like a normal
register if the CFI explicitly sets it, but want to provide a
default value otherwise. Computing the default value requires
an SVE target, so we only want to compute it on demand.
aarch64_vg uses a hard-coded .inst in order to avoid a build
dependency on binutils 2.28 or later.
2018-01-13 Richard Sandiford <richard.sandiford@linaro.org>
gcc/
* doc/tm.texi.in (DWARF_LAZY_REGISTER_VALUE): Document.
* doc/tm.texi: Regenerate.
libgcc/
* config/aarch64/value-unwind.h (aarch64_vg): New function.
(DWARF_LAZY_REGISTER_VALUE): Define.
* unwind-dw2.c (_Unwind_GetGR): Use DWARF_LAZY_REGISTER_VALUE
to provide a fallback register value.
gcc/testsuite/
* g++.target/aarch64/sve/aarch64-sve.exp: New harness.
* g++.target/aarch64/sve/catch_1.C: New test.
* g++.target/aarch64/sve/catch_2.C: Likewise.
* g++.target/aarch64/sve/catch_3.C: Likewise.
* g++.target/aarch64/sve/catch_4.C: Likewise.
* g++.target/aarch64/sve/catch_5.C: Likewise.
* g++.target/aarch64/sve/catch_6.C: Likewise.
Reviewed-by: James Greenhalgh <james.greenhalgh@arm.com>
From-SVN: r256615
2018-01-08 Michael Meissner <meissner@linux.vnet.ibm.com>
* config/rs6000/quad-float128.h (IBM128_TYPE): Explicitly use
__ibm128, instead of trying to use long double.
(CVT_FLOAT128_TO_IBM128): Use TFtype instead of __float128 to
accomidate -mabi=ieeelongdouble multilibs.
(CVT_IBM128_TO_FLOAT128): Likewise.
* config/rs6000/ibm-ldouble.c (IBM128_TYPE): New macro to define
the appropriate IBM extended double type.
(__gcc_qadd): Change all occurances of long double to IBM128_TYPE.
(__gcc_qsub): Likewise.
(__gcc_qmul): Likewise.
(__gcc_qdiv): Likewise.
(pack_ldouble): Likewise.
(__gcc_qneg): Likewise.
(__gcc_qeq): Likewise.
(__gcc_qne): Likewise.
(__gcc_qge): Likewise.
(__gcc_qle): Likewise.
(__gcc_stoq): Likewise.
(__gcc_dtoq): Likewise.
(__gcc_itoq): Likewise.
(__gcc_utoq): Likewise.
(__gcc_qunord): Likewise.
* config/rs6000/_mulkc3.c (toplevel): Include soft-fp.h and
quad-float128.h for the definitions.
(COPYSIGN): Use the f128 version instead of the q version.
(INFINITY): Likewise.
(__mulkc3): Use TFmode/TCmode for float128 scalar/complex types.
* config/rs6000/_divkc3.c (toplevel): Include soft-fp.h and
quad-float128.h for the definitions.
(COPYSIGN): Use the f128 version instead of the q version.
(INFINITY): Likewise.
(FABS): Likewise.
(__divkc3): Use TFmode/TCmode for float128 scalar/complex types.
* config/rs6000/extendkftf2-sw.c (__extendkftf2_sw): Likewise.
* config/rs6000/trunctfkf2-sw.c (__trunctfkf2_sw): Likewise.
From-SVN: r256354
2017-11-30 Michael Meissner <meissner@linux.vnet.ibm.com>
PR libgcc/83112
* config/rs6000/float128-ifunc.c (__addkf3_resolve): Use the
correct type for all ifunc resolvers to silence -Wattribute-alias
warnings. Eliminate the forward declaration of the resolver
functions which is no longer needed.
(__subkf3_resolve): Likewise.
(__mulkf3_resolve): Likewise.
(__divkf3_resolve): Likewise.
(__negkf2_resolve): Likewise.
(__eqkf2_resolve): Likewise.
(__nekf2_resolve): Likewise.
(__gekf2_resolve): Likewise.
(__gtkf2_resolve): Likewise.
(__lekf2_resolve): Likewise.
(__ltkf2_resolve): Likewise.
(__unordkf2_resolve): Likewise.
(__extendsfkf2_resolve): Likewise.
(__extenddfkf2_resolve): Likewise.
(__trunckfsf2_resolve): Likewise.
(__trunckfdf2_resolve): Likewise.
(__fixkfsi_resolve): Likewise.
(__fixkfdi_resolve): Likewise.
(__fixunskfsi_resolve): Likewise.
(__fixunskfdi_resolve): Likewise.
(__floatsikf_resolve): Likewise.
(__floatdikf_resolve): Likewise.
(__floatunsikf_resolve): Likewise.
(__floatundikf_resolve): Likewise.
(__extendkftf2_resolve): Likewise.
(__trunctfkf2_resolve): Likewise.
PR libgcc/83103
* config/rs6000/quad-float128.h (TF): Don't define if long double
is IEEE 128-bit floating point.
(TCtype): Define as either TCmode or KCmode, depending on whether
long double is IEEE 128-bit floating point.
(__mulkc3_sw): Add declarations for software/hardware versions of
complex multiply/divide.
(__divkc3_sw): Likewise.
(__mulkc3_hw): Likewise.
(__divkc3_hw): Likewise.
* config/rs6000/_mulkc3.c (_mulkc3): If we are building ifunc
handlers to switch between using software emulation and hardware
float128 instructions, build the complex multiply/divide functions
for both software and hardware support.
* config/rs6000/_divkc3.c (_divkc3): Likewise.
* config/rs6000/float128-ifunc.c (__mulkc3_resolve): Likewise.
(__divkc3_resolve): Likewise.
(__mulkc3): Likewise.
(__divkc3): Likewise.
* config/rs6000/t-float128-hw (fp128_hardfp_src): Likewise.
(fp128_hw_src): Likewise.
(fp128_hw_static_obj): Likewise.
(fp128_hw_shared_obj): Likewise.
(_mulkc3-hw.c): Create _mulkc3-hw.c and _divkc3-hw.c from
_mulkc3.c and _divkc3.c, changing the function name.
(_divkc3-hw.c): Likewise.
* config/rs6000/t-float128 (clean-float128): Delete _mulkc3-hw.c
and _divkc3-hw.c.
From-SVN: r255282
Control-flow Enforcement Technology (CET), published by Intel,
introduces the Shadow Stack feature, which ensures a return from a
function is done to exactly the same location from where the function
was called. When EH is present the control-flow transfer may skip some
stack frames and the shadow stack has to be adjusted not to signal a
violation of a control-flow transfer. It's done by counting a number
of skiping frames and adjasting shadow stack pointer by this number.
Having new semantic of the 'ret' instruction if CET is supported in HW
the 'ret' instruction cannot be generated in ix86_expand_epilogue when
we are returning after EH is processed. Added a code in
ix86_expand_epilogue to adjust Shadow Stack pointer and to generate an
indirect jump instead of 'ret'. As sp register is used during this
adjustment thus the argument in pro_epilogue_adjust_stack is changed
to update cfa_reg based on whether control-flow instrumentation is set.
Without updating the cfa_reg field there is an assert later in dwarf2
pass related to mismatch the stack register and cfa_reg value.
gcc/
* config/i386/i386.c (ix86_expand_epilogue): Change simple
return to indirect jump for EH return if control-flow protection
is enabled. Change explicit 'false' argument in
pro_epilogue_adjust_stack with a value of flag_cf_protection.
* config/i386/i386.md (simple_return_indirect_internal): Remove
SImode restriction to support 64-bit.
libgcc/
* config/i386/linux-unwind.h: Include
config/i386/shadow-stack-unwind.h.
* config/i386/shadow-stack-unwind.h: New file.
* unwind-dw2.c: (uw_install_context): Add a frame parameter and
pass it to _Unwind_Frames_Extra.
* unwind-generic.h (_Unwind_Frames_Extra): New.
* unwind.inc (_Unwind_RaiseException_Phase2): Add frames_p
parameter. Add local variable frames to count number of frames.
(_Unwind_ForcedUnwind_Phase2): Likewise.
(_Unwind_RaiseException): Add local variable frames to count
number of frames, pass it to _Unwind_RaiseException_Phase2 and
uw_install_context.
(_Unwind_ForcedUnwind): Likewise.
(_Unwind_Resume): Likewise.
(_Unwind_Resume_or_Rethrow): Likewise.
From-SVN: r254876
Enable building libgcc with CET options by default on Linux/x86 if
binutils supports CET v2.0. It can be disabled with --disable-cet.
It is an error to configure GCC with --enable-cet if bintuiils
doesn't support CET v2.0.
ENDBR instruction is added to __morestack_large_model since it is
called indirectly.
2017-11-17 Igor Tsimbalist <igor.v.tsimbalist@intel.com>
config/
* cet.m4: New file.
gcc/
* config.gcc (extra_headers): Add cet.h for x86 targets.
* config/i386/cet.h: New file.
* doc/install.texi: Add --enable-cet/--disable-cet.
libgcc/
* Makefile.in (configure_deps): Add $(srcdir)/../config/cet.m4.
(CET_FLAGS): New.
* config/i386/morestack.S: Include <cet.h>.
(__morestack_large_model): Add _CET_ENDBR at function entrance.
* config/i386/resms64.h: Include <cet.h>.
* config/i386/resms64f.h: Likewise.
* config/i386/resms64fx.h: Likewise.
* config/i386/resms64x.h: Likewise.
* config/i386/savms64.h: Likewise.
* config/i386/savms64f.h: Likewise.
* config/i386/t-linux (HOST_LIBGCC2_CFLAGS): Add $(CET_FLAGS).
(CRTSTUFF_T_CFLAGS): Likewise.
* configure.ac: Include ../config/cet.m4.
Set and substitute CET_FLAGS.
* configure: Regenerated.
From-SVN: r254868
2017-11-07 Tom de Vries <tom@codesourcery.com>
* config/rs6000/aix-unwind.h (REGISTER_CFA_OFFSET_FOR): Remove semicolon
after "do {} while (0)".
From-SVN: r254491
2017-11-04 Andreas Tobler <andreast@gcc.gnu.org>
PR libgcc/82635
* config/i386/freebsd-unwind.h (MD_FALLBACK_FRAME_STATE_FOR): Use a
sysctl to determine whether we're in a trampoline.
Keep the pattern matching method for systems without
KERN_PROC_SIGTRAMP sysctl.
From-SVN: r254411
PR target/82274
* internal-fn.c (expand_mul_overflow): If both operands have
the same highpart of -1 or 0 and the topmost bit of lowpart
is different, overflow is if res <= 0 rather than res < 0.
* libgcc2.c (__mulvDI3): If both operands have
the same highpart of -1 and the topmost bit of lowpart is 0,
multiplication overflows even if both lowparts are 0.
* gcc.dg/pr82274-1.c: New test.
* gcc.dg/pr82274-2.c: New test.
From-SVN: r253734
Building glibc for many different configurations and running the
compilation parts of the testsuite runs into failures of the
elf/check-execstack test for hppa and microblaze. Those
configurations default to executable stacks in the Linux kernel
because of VM_DATA_DEFAULT_FLAGS definitions including VM_EXEC
(VM_DATA_DEFAULT_FLAGS being the default definition of
VM_STACK_DEFAULT_FLAGS).
This fails because those configurations are not generating
.note.GNU-stack sections to indicate that programs do not need an
executable stack. This patch fixes GCC to generate those sections on
those architectures (when configured for a target using the Linux
kernel), as it does on other architectures, together with adding that
section to libgcc .S sources, with the same code as used on other
architectures (or a variant using "#ifdef __linux__" instead of the
usual "#if defined(__ELF__) && defined(__linux__)" for microblaze, as
that configuration doesn't use elfos.h and so doesn't define __ELF__).
This suffices to eliminate that glibc test failure. (For hppa, the
compilation parts of the glibc testsuite still fail because of the
separate elf/check-textrel failure.)
gcc:
* config/microblaze/linux.h (TARGET_ASM_FILE_END): Likewise.
* config/pa/pa.h (NEED_INDICATE_EXEC_STACK): Likewise.
* config/pa/pa-linux.h (NEED_INDICATE_EXEC_STACK): Likewise.
* config/pa/pa.c (pa_hpux_file_end): Rename to pa_file_end.
Define unconditionally, with [ASM_OUTPUT_EXTERNAL_REAL]
conditionals inside the function instead of around it. Call
file_end_indicate_exec_stack if NEED_INDICATE_EXEC_STACK.
(TARGET_ASM_FILE_END): Define unconditionally to pa_file_end.
libgcc:
* config/microblaze/crti.S, config/microblaze/crtn.S,
config/microblaze/divsi3.S, config/microblaze/moddi3.S,
config/microblaze/modsi3.S, config/microblaze/muldi3_hard.S,
config/microblaze/mulsi3.S,
config/microblaze/stack_overflow_exit.S,
config/microblaze/udivsi3.S, config/microblaze/umodsi3.S,
config/pa/milli64.S: Add .note.GNU-stack section.
From-SVN: r253204
gcc:
config/i386/i386.c: (xlogue_layout::STUB_NAME_MAX_LEN): Increase to 20
bytes.
(xlogue_layout::s_stub_names): Add an additional size-2 diminsion.
(xlogue_layout::get_stub_name): Modify to select the appropairate sse
or avx version of the stub.
gcc/testsuite:
gcc.target/i386/pr82196-1.c: New test.
gcc.target/i386/pr82196-2.c: Likewise.
libgcc:
config/i386/i386-asm.h (PASTE2): New macro.
(ASMNAME): Modify to use PASTE2.
(MS2SYSV_STUB_PREFIX): New macro for isa prefix.
(MS2SYSV_STUB_BEGIN, MS2SYSV_STUB_END): New macros for stub headers.
config/i386/resms64.S: Rename to a header file, use MS2SYSV_STUB_BEGIN
instead of HIDDEN_FUNC and MS2SYSV_STUB_END instead of FUNC_END.
config/i386/resms64f.S: Likewise.
config/i386/resms64fx.S: Likewise.
config/i386/resms64x.S: Likewise.
config/i386/savms64.S: Likewise.
config/i386/savms64f.S: Likewise.
config/i386/avx_resms64.S: New file that only defines a macro and
includes it's corresponding header file.
config/i386/avx_resms64f.S: Likewise.
config/i386/avx_resms64fx.S: Likewise.
config/i386/avx_resms64x.S: Likewise.
config/i386/avx_savms64.S: Likewise.
config/i386/avx_savms64f.S: Likewise.
config/i386/sse_resms64.S: Likewise.
config/i386/sse_resms64f.S: Likewise.
config/i386/sse_resms64fx.S: Likewise.
config/i386/sse_resms64x.S: Likewise.
config/i386/sse_savms64.S: Likewise.
config/i386/sse_savms64f.S: Likewise.
config/i386/t-msabi: Modified to add avx and sse versions of stubs.
From-SVN: r252896
This patch is in use by Cygwin for years, upstream to GCC.
* gcc/config/i386/mingw.opt (fset-stack-executable): Removed.
* gcc/config/i386/cygming.opt (fset-stack-executable): Moved
from mingw.opt.
* gcc/config/i386/cygwin.h: Define CHECK_EXECUTE_STACK_ENABLED.
* ligcc/config.host (*-cygwin): Include file from mingw
config/i386/enable-execute-stack-mingw32.c
From-SVN: r250914
2017-08-01 Jerome Lambourg <lambourg@adacore.com>
Doug Rupp <rupp@adacore.com>
Olivier Hainque <hainque@adacore.com>
gcc/
* config.gcc (arm-wrs-vxworks*): Rework to handle arm-wrs-vxworks7 as
well as arm-wrs-vxworks. Update target_cpu_name from arm6 (arch v3) to
arm8 (arch v4).
* config/arm/vxworks.h (MAYBE_TARGET_BPABI_CPP_BUILTINS): New, helper
for TARGET_OS_CPP_BUILTIN.
(TARGET_OS_CPP_BUILTIN): Invoke MAYBE_TARGET_BPABI_CPP_BUILTINS(),
refine CPU definitions for arm_arch5 and add those for arm_arch6 and
arm_arch7.
(MAYBE_ASM_ABI_SPEC): New, helper for SUBTARGET_EXTRA_ASM_SPEC,
passing required abi options to the assembler for EABI configurations.
(EXTRA_CC1_SPEC): New macro, to help prevent the implicit production
of .text.hot and .text.unlikely sections for kernel modules when
using ARM style exceptions.
(CC1_SPEC): Remove obsolete attempt at mimicking Diab toolchain
options. Add EXTRA_CC1_SPEC.
(VXWORKS_ENDIAN_SPEC): Adjust comment and remove handling of Diab
toolchain options.
(DWARF2_UNWIND_INFO): Redefine to handle the pre/post VxWorks 7
transition.
(ARM_TARGET2_DWARF_FORMAT): Define.
* config/arm/t-vxworks: Adjust multilib control to removal of the
Diab command line options.
libgcc/
* config.host (arm-wrs-vxworks*): Rework to handle arm-wrs-vxworks7
as well as arm-wrs-vxworks.
* config/arm/t-vxworks7: New file. Add unwind-arm-vxworks.c to
LIB2ADDEH.
* config/arm/unwind-arm-vxworks.c: New file. Provide dummy
__exidx_start and __exidx_end for downloadable modules.
Co-Authored-By: Doug Rupp <rupp@adacore.com>
Co-Authored-By: Olivier Hainque <hainque@adacore.com>
From-SVN: r250781
2017-07-24 Daniel Santos <daniel.santos@pobox.com>
PR testsuite/80759
* config.host: include i386/t-msabi for darwin and solaris.
* config/i386/i386-asm.h
(ELFFN): Rename to FN_TYPE.
(FN_SIZE): New macro.
(FN_HIDDEN): Likewise.
(ASMNAME): Likewise.
(FUNC_START): Rename to FUNC_BEGIN, use ASMNAME, replace .global with
.globl.
(HIDDEN_FUNC): Use ASMNAME and .globl instead of .global.
(SSE_SAVE): Convert to cpp macro, hard-code offset (always 0x60).
* config/i386/resms64.S: Use SSE_SAVE as cpp macro instead of gas
.macro.
* config/i386/resms64f.S: Likewise.
* config/i386/resms64fx.S: Likewise.
* config/i386/resms64x.S: Likewise.
* config/i386/savms64.S: Likewise.
* config/i386/savms64f.S: Likewise.
From-SVN: r250488
[gcc]
2017-07-12 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/81193
* config/rs6000/rs6000-c.c (rs6000_cpu_cpp_builtins): If GLIBC
provides the hardware capability bits, define the macro
__BUILTIN_CPU_SUPPORTS__.
* config/rs6000/rs6000.c (cpu_expand_builtin): Generate a warning
if GLIBC does not provide the hardware capability bits. Add a
gcc_unreachable call if the built-in cpu function is neither
__builtin_cpu_is nor __builtin_cpu_supports.
(rs6000_get_function_versions_dispatcher): Change the warning
that an old GLIBC is used which does not export the capability
bits to be an error.
* doc/extend.texi (target_clones attribute): Document the
restriction that GLIBC 2.23 or newer is needed on the PowerPC.
(PowerPC built-in functions): Document that GLIBC 2.23 or newer is
needed by __builtin_cpu_is and __builtin_cpu_supports. Document
the macros defined by GCC if the newer GLIBC is available.
[gcc/testsuite]
2017-07-12 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/81193
* gcc.target/powerpc/bmi-andn-1.c: Add guard against using
__builtin_cpu_supports with old GLIBC's.
* gcc.target/powerpc/bmi-andn-2.c: Likewise.
* gcc.target/powerpc/bmi-bextr-1.c: Likewise.
* gcc.target/powerpc/bmi-bextr-2.c: Likewise.
* gcc.target/powerpc/bmi-bextr-4.c: Likewise.
* gcc.target/powerpc/bmi-bextr-5.c: Likewise.
* gcc.target/powerpc/bmi-blsi-1.c: Likewise.
* gcc.target/powerpc/bmi-blsi-2.c: Likewise.
* gcc.target/powerpc/bmi-blsmsk-1.c: Likewise.
* gcc.target/powerpc/bmi-blsmsk-2.c: Likewise.
* gcc.target/powerpc/bmi-blsr-1.c: Likewise.
* gcc.target/powerpc/bmi-blsr-2.c: Likewise.
* gcc.target/powerpc/bmi-tzcnt-1.c: Likewise.
* gcc.target/powerpc/bmi-tzcnt-2.c: Likewise.
* gcc.target/powerpc/bmi2-bzhi32-1.c: Likewise.
* gcc.target/powerpc/bmi2-bzhi64-1.c: Likewise.
* gcc.target/powerpc/bmi2-mulx32-1.c: Likewise.
* gcc.target/powerpc/bmi2-mulx32-2.c: Likewise.
* gcc.target/powerpc/bmi2-mulx64-1.c: Likewise.
* gcc.target/powerpc/bmi2-mulx64-2.c: Likewise.
* gcc.target/powerpc/bmi2-pdep32-1.c: Likewise.
* gcc.target/powerpc/bmi2-pdep64-1.c: Likewise.
* gcc.target/powerpc/bmi2-pext32-1.c: Likewise.
* gcc.target/powerpc/bmi2-pext64-1.c: Likewise.
* gcc.target/powerpc/cpu-builtin-1.c: Likewise.
[libgcc]
2017-07-12 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/81193
* configure.ac (PowerPC float128 hardware support): Test whether
we can use __builtin_cpu_supports before enabling the ifunc
handler.
* configure: Regenerate.
From-SVN: r250165
Current glibc no longer gives the ucontext_t type the tag struct
ucontext, to conform with POSIX namespace rules. This requires
various linux-unwind.h files in libgcc, that were previously using
struct ucontext, to be fixed to use ucontext_t instead. This is
similar to the removal of the struct siginfo tag from siginfo_t some
years ago.
This patch changes those files to use ucontext_t instead. As the
standard name that should be unconditionally safe, so this is not
restricted to architectures supported by glibc, or conditioned on the
glibc version.
Tested compilation together with current glibc with glibc's
build-many-glibcs.py.
* config/aarch64/linux-unwind.h (aarch64_fallback_frame_state),
config/alpha/linux-unwind.h (alpha_fallback_frame_state),
config/bfin/linux-unwind.h (bfin_fallback_frame_state),
config/i386/linux-unwind.h (x86_64_fallback_frame_state,
x86_fallback_frame_state), config/m68k/linux-unwind.h (struct
uw_ucontext), config/nios2/linux-unwind.h (struct nios2_ucontext),
config/pa/linux-unwind.h (pa32_fallback_frame_state),
config/riscv/linux-unwind.h (riscv_fallback_frame_state),
config/sh/linux-unwind.h (sh_fallback_frame_state),
config/tilepro/linux-unwind.h (tile_fallback_frame_state),
config/xtensa/linux-unwind.h (xtensa_fallback_frame_state): Use
ucontext_t instead of struct ucontext.
From-SVN: r249731
gcc/
2017-06-22 Matt Turner <mattst88@gmail.com>
* config/i386/driver-i386.c (host_detect_local_cpu): Add Kaby
Lake models to skylake case. Assume skylake for unknown
models with clflushopt.
gcc/testsuite/
2017-06-22 Matt Turner <mattst88@gmail.com>
* gcc.target/i386/builtin_target.c: Add Kaby Lake models to
skylake check.
libgcc/
2017-06-22 Matt Turner <mattst88@gmail.com>
* config/i386/cpuinfo.c (get_intel_cpu): Add Kaby Lake models to
skylake case.
From-SVN: r249574
2017-06-21 Richard Biener <rguenther@suse.de>
PR gcov-profile/81080
* configure.ac: Add AC_SYS_LARGEFILE.
* libgcov.h: Include auto-target.h before tsystem.h to pick
up _FILE_OFFSET_BITS which might differ for multilibs.
* config.in: Regenerate.
* configure: Likewise.
From-SVN: r249435
This file is missing a .fpu directive and was relying on the compiler
driver passing through a -mfpu= command line option. When the FPU is
auto, that will not be passed through correctly, so set something
suitable within the file itself.
libgcc:
* config/arm/cmse_nonsecure_call.S: Explicitly set the FPU.
From-SVN: r249297
2017-06-09 Martin Liska <mliska@suse.cz>
* tree-profile.c (gimple_gen_ic_profiler): Update comment.
(gimple_gen_ic_func_profiler): Emit direct comparison
of __gcov_indirect_call_callee with NULL.
(gimple_gen_time_profiler): Change probability from
PROB_VERY_UNLIKELY to PROB_UNLIKELY.
2017-06-09 Martin Liska <mliska@suse.cz>
* libgcov-profiler.c (__gcov_indirect_call_profiler_v2):
Reset __gcov_indirect_call_callee to NULL.
From-SVN: r249058
2017-06-08 Olivier Hainque <hainque@adacore.com>
* config/t-vxworks (LIBGCC2_INCLUDES): Add path to wrn/coreip to
the set of -I options, support for direct inclusions of net/uio.h
by VxWorks header files via ioLib.h.
From-SVN: r249016
2017-05-17 Andreas Tobler <andreast@gcc.gnu.org>
* config/arm/unwind-arm.h: Make _Unwind_GetIP, _Unwind_GetIPInfo and
_Unwind_SetIP available as functions for arm*-*-freebsd*.
* config/arm/unwind-arm.c: Implement the above.
From-SVN: r248173
gcc/ChangeLog:
* config/i386/i386.opt: Add option -mcall-ms2sysv-xlogues.
* config/i386/i386.h
(x86_64_ms_sysv_extra_clobbered_registers): Change type to unsigned.
(NUM_X86_64_MS_CLOBBERED_REGS): New macro.
(struct machine_function): Add new members call_ms2sysv,
call_ms2sysv_pad_in, call_ms2sysv_pad_out and call_ms2sysv_extra_regs.
(struct machine_frame_state): New fields sp_realigned and
sp_realigned_offset.
* config/i386/i386.c
(enum xlogue_stub): New enum.
(enum xlogue_stub_sets): New enum.
(class xlogue_layout): New class.
(struct ix86_frame): New fields stack_realign_allocate_offset,
stack_realign_offset and outlined_save_offset. Modify comments to
detail stack layout when using out-of-line stubs.
(ix86_target_string): Add -mcall-ms2sysv-xlogues option.
(ix86_option_override_internal): Add sorry() for TARGET_SEH and
-mcall-ms2sysv-xlogues.
(stub_managed_regs): New static variable.
(ix86_save_reg): Add new parameter ignore_outlined to optionally omit
registers managed by out-of-line stub.
(disable_call_ms2sysv_xlogues): New function.
(ix86_compute_frame_layout): Modify re-alignment calculations, disable
m->call_ms2sysv when appropriate and compute frame layout for
out-of-line stubs.
(sp_valid_at, fp_valid_at): New inline functions.
(choose_basereg): New function.
(choose_baseaddr): Add align parameter, use choose_basereg and modify
all callers.
(ix86_emit_save_reg_using_mov, ix86_emit_restore_sse_regs_using_mov):
Use align parameter of choose_baseaddr to generated aligned SSE movs
when possible.
(pro_epilogue_adjust_stack): Modify to track
machine_frame_state::sp_realigned.
(ix86_nsaved_regs): Modify to accommodate changes to ix86_save_reg.
(ix86_nsaved_sseregs): Likewise.
(ix86_emit_save_regs): Likewise.
(ix86_emit_save_regs_using_mov): Likewise.
(ix86_emit_save_sse_regs_using_mov): Likewise.
(get_scratch_register_on_entry): Likewise.
(gen_frame_set): New function.
(gen_frame_load): Likewise.
(gen_frame_store): Likewise.
(emit_outlined_ms2sysv_save): Likewise.
(emit_outlined_ms2sysv_restore): Likewise.
(ix86_expand_prologue): Modify stack re-alignment code and call
emit_outlined_ms2sysv_save when appropriate.
(ix86_emit_leave): Clear machine_frame_state::sp_realigned. Add
parameter rtx_insn *insn, which allows the function to be used to only
generate the notes.
(ix86_expand_epilogue): Modify validity checks of frame and stack
pointers, and call emit_outlined_ms2sysv_restore when appropriate.
(ix86_expand_call): Modify to enable m->call_ms2sysv when appropriate.
* config/i386/predicates.md
(save_multiple): New predicate.
(restore_multiple): Likewise.
* config/i386/sse.md
(save_multiple<mode>): New pattern.
(save_multiple_realign<mode>): Likewise.
(restore_multiple<mode>): Likewise.
(restore_multiple_and_return<mode>): Likewise.
(restore_multiple_leave_return<mode>): Likewise.
* Makefile.in: Export HOSTCXX and HOSTCXXFLAGS to site.exp
gcc/testsuite/ChangeLog:
* gcc.target/x86_64/abi/ms-sysv/do-test.S: New file.
* gcc.target/x86_64/abi/ms-sysv/gen.cc: Likewise.
* gcc.target/x86_64/abi/ms-sysv/ms-sysv.c: Likewise.
* gcc.target/x86_64/abi/ms-sysv/ms-sysv.exp: Likewise.
libgcc/ChangeLog:
* config.host: Add i386/t-msabi to i386/t-linux file list.
* config/i386/i386-asm.h: New file.
* config/i386/resms64.S: New file.
* config/i386/resms64f.S: New file.
* config/i386/resms64fx.S: New file.
* config/i386/resms64x.S: New file.
* config/i386/savms64.S: New file.
* config/i386/savms64f.S: New file.
* config/i386/t-msabi: New file.
From-SVN: r248029
2017-05-09 Andreas Tobler <andreast@gcc.gnu.org>
* config.host: Use the generic FreeBSD t-slibgcc-elf-ver for
arm*-*-freebsd* instead of the t-slibgcc-libgcc.
From-SVN: r247812
2017-04-19 Martin Liska <mliska@suse.cz>
PR gcov-profile/80435
* Makefile.in: Install gcov.h.
* gcov.h: New file.
* libgcov.h: Use the header and make __gcov_flush publicly
visible.
From-SVN: r246990
2017-04-18 Martin Liska <mliska@suse.cz>
PR gcov-profile/78783
* libgcov-driver.c (gcov_get_filename): New function.
2017-04-18 Martin Liska <mliska@suse.cz>
PR gcov-profile/78783
* gcov-tool.c (gcov_output_files): Validate that destination
file is either removed by the tool or by a user.
From-SVN: r246961
* Makefile.in: Swap definition of LIBGCC_LINKS and inclusion of
target makefile fragment.
* config/sh/t-sh (unwind-dw2-Os-4-200.o): Depend on LIBGCC_LINKS.
From-SVN: r246766
These files won't build on targets that do not have AltiVec enabled,
breaking the build, unless we tell GAS that Altivec insns are fine.
The alternative is to not build these files in that case, which is much
more complicated.
libgcc/
* config/rs6000/crtrestvr.s: Use .machine altivec.
* config/rs6000/crtsavevr.s: Ditto.
From-SVN: r246051
This fixes float128 on BE and on 32-bit.
The configure tests need to use -mabi=altivec for 32-bit, since it is
not the default there. That also enables the "vector" keyword, used by
the tests. To do this it temporarily adds a few flags to the CFLAGS
variable.
It also fixes a syntax error in the libgcc_cv_powerpc_float128_hw test
(the function name was missing in the function declaration).
Regenerating config.in (via autoreconf) removed the duplicate definition
of HAVE_SOLARIS_CRTS.
Finally, this adds a "-mfloat128-hardware requires -m64" test to
rs6000.c: all the current patterns need 64-bit registers. Maybe we'll
want to add float128 hardware support to 32-bit some day, but certainly
not today.
* config/rs6000/rs6000.c (rs6000_option_override_internal): Disallow
-mfloat128-hardware without -m64.
libgcc/
* configure.ac (test for libgcc_cv_powerpc_float128): Temporarily
modify CFLAGS. Add -mabi=altivec -mvsx -mfloat128.
(test for libgcc_cv_powerpc_float128_hw): Add -mpower9-vector and
-mfloat128-hardware to the CFLAGS. Fix syntax error in the C snippet.
* configure: Regenerate.
* config.in: Regenerate.
From-SVN: r246043
libgcc/
* config/aarch64/aarch64-unwind.h: New file.
(DWARF_REGNUM_AARCH64_RA_STATE): Define.
(MD_POST_EXTRACT_ROOT_ADDR): New target marcro and define it on AArch64.
(MD_POST_EXTRACT_FRAME_ADDR): Likewise.
(MD_POST_FROB_EH_HANDLER_ADDR): Likewise.
(MD_FROB_UPDATE_CONTEXT): Define it on AArch64.
(aarch64_post_extract_frame_addr): New function.
(aarch64_post_frob_eh_handler_addr): New function.
(aarch64_frob_update_context): New function.
* config/aarch64/linux-unwind.h: Include aarch64-unwind.h
* config.host (aarch64*-*-elf, aarch64*-*-rtems*,
aarch64*-*-freebsd*):
Initialize md_unwind_header to include aarch64-unwind.h.
* unwind-dw2.c (struct _Unwind_Context): Define "RA_A_SIGNED_BIT".
(execute_cfa_program): Multiplex DW_CFA_GNU_window_save for
__aarch64__.
(uw_update_context): Honor MD_POST_EXTRACT_FRAME_ADDR.
(uw_init_context_1): Honor MD_POST_EXTRACT_ROOT_ADDR.
(uw_frob_return_addr): New function.
(uw_install_context): Use uw_frob_return_addr.
From-SVN: r244673
PR other/79046
* configure: Regenerated.
config/
* acx.m4 (GCC_BASE_VER): New m4 function.
(ACX_TOOL_DIRS): Require GCC_BASE_VER, for
--with-gcc-major-version-only use just major number from BASE-VER.
gcc/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
version from BASE-VER file.
(CFLAGS-gcc.o): Add -DBASEVER=$(BASEVER_s).
(gcc.o): Depend on $(BASEVER).
* common.opt (dumpfullversion): New option.
* gcc.c (driver_handle_option): Handle OPT_dumpfullversion.
* doc/invoke.texi: Document -dumpfullversion.
* doc/install.texi: Document --with-gcc-major-version-only.
* configure: Regenerated.
libatomic/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
libgomp/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
libgcc/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
version from BASE-VER file.
* configure: Regenerated.
libssp/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
liboffloadmic/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* aclocal.m4: Include ../config/acx.m4.
* configure: Regenerated.
* Makefile.in: Regenerated.
libquadmath/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
libmpx/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
libada/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
version from BASE-VER file.
* configure: Regenerated.
lto-plugin/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
libitm/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
fixincludes/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
libcilkrts/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* aclocal.m4: Include ../config/acx.m4.
* configure: Regenerated.
* Makefile.in: Regenerated.
libcc1/
* configure.ac: Add GCC_BASE_VER. For --with-gcc-major-version-only
use just major number from BASE-VER.
* configure: Regenerated.
* Makefile.in: Regenerated.
libobjc/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
libstdc++-v3/
* configure.ac: Add GCC_BASE_VER.
* fragment.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* po/Makefile.in: Regenerated.
* libsupc++/Makefile.in: Regenerated.
* testsuite/Makefile.in: Regenerated.
* src/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
* include/Makefile.in: Regenerated.
* doc/Makefile.in: Regenerated.
* python/Makefile.in: Regenerated.
* src/c++11/Makefile.in: Regenerated.
* src/c++98/Makefile.in: Regenerated.
* src/filesystem/Makefile.in: Regenerated.
libvtv/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
libsanitizer/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* libbacktrace/Makefile.in: Regenerated.
* interception/Makefile.in: Regenerated.
* asan/Makefile.in: Regenerated.
* ubsan/Makefile.in: Regenerated.
* configure: Regenerated.
* sanitizer_common/Makefile.in: Regenerated.
* lsan/Makefile.in: Regenerated.
* Makefile.in: Regenerated.
* tsan/Makefile.in: Regenerated.
libgfortran/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
From-SVN: r244521
The MIPS sfp-machine.h has an _FP_CHOOSENAN implementation which
emulates hardware semantics of not preserving signaling NaN payloads
for an operation with two NaN arguments (although that doesn't suffice
to avoid sNaN payload preservation in any case with just one NaN
argument).
However, those are only hardware semantics in the legacy NaN case; in
the NAN2008 case, the architecture documentation says hardware
preserves payloads in such cases. Furthermore, this implementation
assumes legacy NaN semantics, so in the NAN2008 case the
implementation actually has the effect of preserving sNaN payloads but
not preserving qNaN payloads, when both should be preserved.
This patch fixes the code just to copy from the first argument (at the
level of libgcc, it's not meaningful which argument is the first and
which is the second).
Tested for mips64-linux-gnu (soft float, NAN2008) with the glibc math/
tests.
* config/mips/sfp-machine.h (_FP_CHOOSENAN): Always preserve NaN
payload if [__mips_nan2008].
From-SVN: r244059