Add encode and trans* functions support for Zcb instructions.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230307081403.61950-6-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Separate c_fld/c_fsd from fld/fsd to add additional check for
c.fld{sp}/c.fsd{sp} which is useful for zcmp/zcmt to reuse
their encodings.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230307081403.61950-5-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Separate c_flw/c_fsw from flw/fsw to add check for Zcf extension.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230307081403.61950-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Modify the check for C extension to Zca (C implies Zca).
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Message-Id: <20230307081403.61950-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add properties for Zca,Zcb,Zcf,Zcd,Zcmp,Zcmt extension.
Add check for these properties.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230307081403.61950-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
dt-validate complains:
> soc: pmu: {'riscv,event-to-mhpmcounters':
> [[1, 1, 524281], [2, 2, 524284], [65561, 65561, 524280],
> [65563, 65563, 524280], [65569, 65569, 524280], [0, 0, 0], [0, 0]],
> pmu: riscv,event-to-mhpmcounters:6: [0, 0] is too short
There are bogus 0 entries added at the end, of which one is of
insufficient length. This happens because only 15 of
fdt_event_ctr_map[]'s 20 elements are populated & qemu_fdt_setprop() is
called using the size of the array.
Reduce the array to 15 elements to make the error go away.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230404173333.35179-1-conor@kernel.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Zicond standard extension implements the same instruction
semantics as XVentanaCondOps, although using different mnemonics and
opcodes.
Point XVentanaCondOps to the (newly implemented) Zicond implementation
to reduce the future maintenance burden.
Also updating MAINTAINERS as trans_xventanacondops.c.inc.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230307180708.302867-3-philipp.tomsich@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
After the original Zicond support was stuck/fell through the cracks on
the mailing list at v3 (and a different implementation was merged in
the meanwhile), we need to refactor Zicond to prepare it to be reused
by XVentanaCondOps.
This commit lifts the common logic out into gen_czero and uses this
via gen_logic and 2 helper functions (effectively partial closures).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230307180708.302867-2-philipp.tomsich@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Remove RISCVCPU argument, and get cfg infomation from CPURISCVState
directly.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230309071329.45932-5-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use CPURISCVState as argument directly in riscv_cpu_update_mip and
riscv_timer_write_timecmp, since type converts from CPURISCVState to
RISCVCPU in many caller of them and then back to CPURISCVState in them.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230309071329.45932-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use env_archcpu() to get RISCVCPU pointer from env directly.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230309071329.45932-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Vector implicitly enables zve64d, zve64f, zve32f sub extensions. As vector
only requires PRIV_1_10_0, these sub extensions should not require priv version
higher than that.
The same for Zfh.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-Id: <20230321043415.754-1-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use riscv_cpu_cfg(env) instead of env_archcpu().cfg.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230309071329.45932-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230306175230.7110-17-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These inline helpers are all used by target specific code so move them
out of the general header so we don't needlessly pollute the rest of
the API with target specific stuff.
Note we have to include cpu.h in semihosting as it was relying on a
side effect before.
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-21-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-21-richard.henderson@linaro.org>
This aids subsystems (like gdbstub) that want to trigger a flush
without pulling target specific headers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-8-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-8-richard.henderson@linaro.org>
* Support for the Zicbiom, ZCicboz, and Zicbop extensions.
* OpenSBI has been updated to version 1.2, see
<https://github.com/riscv-software-src/opensbi/releases/tag/v1.2> for
the release notes.
* Support for setting the virtual address width (ie, sv39/sv48/sv57) on
the command line.
* Support for ACPI on RISC-V.
-----BEGIN PGP SIGNATURE-----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=5gAt
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20230306' of https://gitlab.com/palmer-dabbelt/qemu into staging
Sixth RISC-V PR for 8.0
* Support for the Zicbiom, ZCicboz, and Zicbop extensions.
* OpenSBI has been updated to version 1.2, see
<https://github.com/riscv-software-src/opensbi/releases/tag/v1.2> for
the release notes.
* Support for setting the virtual address width (ie, sv39/sv48/sv57) on
the command line.
* Support for ACPI on RISC-V.
# -----BEGIN PGP SIGNATURE-----
#
# iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmQGYGgTHHBhbG1lckBk
# YWJiZWx0LmNvbQAKCRAuExnzX7sYidmyEAC6FEMbbFM5D++qR6w6xM6hXgzcrev6
# s1kyRRNVa45uSA78ti/Zi0hsDLNf7ZsNPndF0OIkkO5iAE0OVm3LU7tV1TqKcT82
# Dd9VXxe93zEmfnuJazHrMa54SXPhhnNdWHtKlZ6vBfZpbxgx0FFs50xkCsrM5LQZ
# hYHxQUqPWQTvF2MdDHrxCuLcdKl+Wg3ysCcgRh2d049KUBrIu6vNaHC2+AGRjCbj
# BkrGCkB82fTmVJjzAcVWQxLoAV12pCbJS4og1GtP8hA7WevtB39tbPin9siBKRZp
# QBeiIsg0nebkpmZGrb+xWVwlIBNe9yYwJa0KmveQk8v7L5RIzjM1mtDL91VrVljC
# KC2tfT570m0Iq2NoFMb3wd/kESHFzVDM/g+XYqRd4KSoiCNP/RbqYNQBwbMc31Tr
# E27xfA1D8w2vem0Rk20x3KgPf1Z5OmGXjq6YObTpnAzG8cZlA37qKBP+ortt5aHX
# GZSg3CAwknHHVajd4aaegkPsHxm1tRvoTfh38MwkPSNxaA9GD0nz0k9xaYDmeZ2L
# olfanNsaQEwcVUId31+7sAENg1TZU0fnj879/nxkMUCazVTdL8/mz+IoTTx0QCST
# 3+9ATWcyJUlmjbDKIs7kr1L+wJdvvHEJggPAbbPI8ekpXaLZvUYOT6ObzYKNAmwY
# wELQBn8QKXcLVA==
# =5gAt
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 Mar 2023 21:51:36 GMT
# gpg: using RSA key 2B3C3747446843B24A943A7A2E1319F35FBB1889
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmerdabbelt@google.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
# Subkey fingerprint: 2B3C 3747 4468 43B2 4A94 3A7A 2E13 19F3 5FBB 1889
* tag 'pull-riscv-to-apply-20230306' of https://gitlab.com/palmer-dabbelt/qemu: (22 commits)
MAINTAINERS: Add entry for RISC-V ACPI
hw/riscv/virt.c: Initialize the ACPI tables
hw/riscv/virt: virt-acpi-build.c: Add RHCT Table
hw/riscv/virt: virt-acpi-build.c: Add RINTC in MADT
hw/riscv/virt: Enable basic ACPI infrastructure
hw/riscv/virt: Add memmap pointer to RiscVVirtState
hw/riscv/virt: Add a switch to disable ACPI
hw/riscv/virt: Add OEM_ID and OEM_TABLE_ID fields
riscv: Correctly set the device-tree entry 'mmu-type'
riscv: Introduce satp mode hw capabilities
riscv: Allow user to set the satp mode
riscv: Change type of valid_vm_1_10_[32|64] to bool
riscv: Pass Object to register_cpu_props instead of DeviceState
roms/opensbi: Upgrade from v1.1 to v1.2
gitlab/opensbi: Move to docker:stable
hw: intc: Use cpu_by_arch_id to fetch CPU state
target/riscv: cpu: Implement get_arch_id callback
disas/riscv Fix ctzw disassemble
hw/riscv/virt.c: add cbo[mz]-block-size fdt properties
target/riscv: add Zicbop cbo.prefetch{i, r, m} placeholder
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently, the max satp mode is set with the only constraint that it must be
implemented in QEMU, i.e. set in valid_vm_1_10_[32|64].
But we actually need to add another level of constraint: what the hw is
actually capable of, because currently, a linux booting on a sifive-u54
boots in sv57 mode which is incompatible with the cpu's sv39 max
capability.
So add a new bitmap to RISCVSATPMap which contains this capability and
initialize it in every XXX_cpu_init.
Finally:
- valid_vm_1_10_[32|64] constrains which satp mode the CPU can use
- the CPU hw capabilities constrains what the user may select
- the user's selection then constrains what's available to the guest
OS.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230303131252.892893-5-alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
RISC-V specifies multiple sizes for addressable memory and Linux probes for
the machine's support at startup via the satp CSR register (done in
csr.c:validate_vm).
As per the specification, sv64 must support sv57, which in turn must
support sv48...etc. So we can restrict machine support by simply setting the
"highest" supported mode and the bare mode is always supported.
You can set the satp mode using the new properties "sv32", "sv39", "sv48",
"sv57" and "sv64" as follows:
-cpu rv64,sv57=on # Linux will boot using sv57 scheme
-cpu rv64,sv39=on # Linux will boot using sv39 scheme
-cpu rv64,sv57=off # Linux will boot using sv48 scheme
-cpu rv64 # Linux will boot using sv57 scheme by default
We take the highest level set by the user:
-cpu rv64,sv48=on,sv57=on # Linux will boot using sv57 scheme
We make sure that invalid configurations are rejected:
-cpu rv64,sv39=off,sv48=on # sv39 must be supported if higher modes are
# enabled
We accept "redundant" configurations:
-cpu rv64,sv48=on,sv57=off # Linux will boot using sv48 scheme
And contradictory configurations:
-cpu rv64,sv48=on,sv48=off # Linux will boot using sv39 scheme
Co-Developed-by: Ludovic Henry <ludovic@rivosinc.com>
Signed-off-by: Ludovic Henry <ludovic@rivosinc.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-ID: <20230303131252.892893-4-alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This array is actually used as a boolean so swap its current char type
to a boolean and at the same time, change the type of validate_vm to
bool since it returns valid_vm_1_10_[32|64].
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-ID: <20230303131252.892893-3-alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
One can extract the DeviceState pointer from the Object pointer, so pass
the Object for future commits to access other fields of Object.
No functional changes intended.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Message-ID: <20230303131252.892893-2-alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Implement the callback for getting the architecture-dependent CPU ID ie
mhartid.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230303065055.915652-2-mchitale@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
All uses are strictly read-only.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries,
therefore there's no need to record temps for later freeing.
Replace the few uses with tcg_temp_new.
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries,
therefore there's no need to record temps for later freeing.
Replace the few uses with tcg_temp_new_i64.
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The cmo.prefetch instructions are nops for QEMU (no emulation of the
memory hierarchy, no illegal instructions, no permission faults, no
traps).
Add a comment noting where they would be decoded in case cbo.prefetch
instructions become relevant in the future.
Co-developed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Signed-off-by: Christoph Muellner <cmuellner@linux.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-ID: <20230224132536.552293-5-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Zicbom is the Cache-Block Management extension defined in the already
ratified RISC-V Base Cache Management Operation (CBO) ISA extension [1].
The extension contains three instructions: cbo.clean, cbo.flush and
cbo.inval. All of them must be implemented in the same group as LQ and
cbo.zero due to overlapping patterns.
All these instructions can throw a Illegal Instruction/Virtual
Instruction exception, similar to the existing cbo.zero. The same
check_zicbo_envcfg() is used to handle these exceptions.
Aside from that, these instructions also need to handle page faults and
guest page faults. This is done in a new check_zicbom_access() helper.
As with Zicboz, the cache block size for Zicbom is also configurable.
Note that the spec determines that Zicbo[mp] and Zicboz can have
different cache sizes (Section 2.7 of [1]), so we also include a
'cbom_blocksize' to go along with the existing 'cboz_blocksize'. They
are set to the same size, so unless users want to play around with the
settings both sizes will be the same.
[1] https://github.com/riscv/riscv-CMOs/blob/master/specifications/cmobase-v1.0.1.pdf
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Co-developed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Signed-off-by: Christoph Muellner <cmuellner@linux.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230224132536.552293-4-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The RISC-V base cache management operation (CBO) ISA extension has been
ratified. It defines three extensions: Cache-Block Management, Cache-Block
Prefetch and Cache-Block Zero. More information about the spec can be
found at [1].
Let's start by implementing the Cache-Block Zero extension, Zicboz. It
uses the cbo.zero instruction that, as with all CBO instructions that
will be added later, needs to be implemented in an overlap group with
the LQ instruction due to overlapping patterns.
cbo.zero throws a Illegal Instruction/Virtual Instruction exception
depending on CSR state. This is also the case for the remaining cbo
instructions we're going to add next, so create a check_zicbo_envcfg()
that will be used by all Zicbo[mz] instructions.
[1] https://github.com/riscv/riscv-CMOs/blob/master/specifications/cmobase-v1.0.1.pdf
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Co-developed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Signed-off-by: Christoph Muellner <cmuellner@linux.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-ID: <20230224132536.552293-3-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
* Experimantal support for writable misa.
* Support for Svadu extension.
* Support for the Zicond extension.
* Fixes to gdbstub, CSR accesses, dependencies between the various
floating-point exceptions, and XTheadMemPair.
* Many cleanups.
-----BEGIN PGP SIGNATURE-----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=FMkl
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20230303' of https://gitlab.com/palmer-dabbelt/qemu into staging
Fifth RISC-V PR for QEMU 8.0
* Experimantal support for writable misa.
* Support for Svadu extension.
* Support for the Zicond extension.
* Fixes to gdbstub, CSR accesses, dependencies between the various
floating-point exceptions, and XTheadMemPair.
* Many cleanups.
# -----BEGIN PGP SIGNATURE-----
#
# iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmQBrrUTHHBhbG1lckBk
# YWJiZWx0LmNvbQAKCRAuExnzX7sYicHrD/9dHBDOYNwyT/C2Q31NHMcEsVN6J0kW
# 0sVyDb2/TUFoXmClMwS6jZYQQwWD7tjjB7BDcvPJ0QKLblDoZFX5JyxpQypIKWcs
# It/E6mk7aG0epH1GoB/mbHFDbeCm4tbo7Vf6cQGpV/vGWBUaOS67c5nenUK7Tlqw
# NTr9qak+9NYVswvMHZ0lUKtO12W1g/1EVkict2/90P2snWbPZ+foWomifGNljmhy
# 5WtCNp27uBKF/uuD9xubLOxSEcqtZFTuKJy7U3azV4I0IKfd6Is83Kd0IwBOrTgT
# MYkFdtQE1jgbkXYVZjft6ymLuqJrcLFYwD8C2zdNAXJLk1Y+MCtGafgW6f6SkT6B
# FrNaSOqQ9xXiaNStF2FwYdmZ476zcY+eEg2rH1grTwCMewZ9r7m3+H8iat/tR0pt
# 9scYAre1oaL33LB6DGZi3JkssNYyj42sutcNao2hQXRHcsh+vv1dLR+Di2mO6Ji5
# MNfvEgCrWWZjNVSwvhwCXdJPqqpyTbkRf8HJEp0gWvjk6VoF8sWidDw/8oMLj+wW
# qZur7GNe+piJNvly85aFSL9J3SX7RyNeDzX/yK3b4k+g6I/ZziQaNgQtB9gYcm6w
# mj3snCwRbEMEhdhPH0+Chm0Wb97knHJS14Vq9wCe2xh16o3HM5FspboLFkGZMjDV
# tRDPFb7pitwdlA==
# =FMkl
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 03 Mar 2023 08:24:21 GMT
# gpg: using RSA key 2B3C3747446843B24A943A7A2E1319F35FBB1889
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmerdabbelt@google.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
# Subkey fingerprint: 2B3C 3747 4468 43B2 4A94 3A7A 2E13 19F3 5FBB 1889
* tag 'pull-riscv-to-apply-20230303' of https://gitlab.com/palmer-dabbelt/qemu: (59 commits)
target/riscv/vector_helper.c: avoid env_archcpu() when reading RISCVCPUConfig
target/riscv/vector_helper.c: create vext_set_tail_elems_1s()
target/riscv/csr.c: avoid env_archcpu() usages when reading RISCVCPUConfig
target/riscv/csr.c: use riscv_cpu_cfg() to avoid env_cpu() pointers
target/riscv/csr.c: simplify mctr()
target/riscv/csr.c: use env_archcpu() in ctr()
target/riscv: Export Svadu property
target/riscv: Add *envcfg.HADE related check in address translation
target/riscv: Add *envcfg.PBMTE related check in address translation
target/riscv: Add csr support for svadu
target/riscv: Fix the relationship of PBMTE/STCE fields between menvcfg and henvcfg
target/riscv: Fix the relationship between menvcfg.PBMTE/STCE and Svpbmt/Sstc extensions
hw/riscv: Move the dtb load bits outside of create_fdt()
hw/riscv: Skip re-generating DT nodes for a given DTB
target/riscv: Add support for Zicond extension
RISC-V: XTheadMemPair: Remove register restrictions for store-pair
target/riscv: Fix checking of whether instruciton at 'pc_next' spans pages
target/riscv: Group all predicate() routines together
target/riscv: Drop priv level check in mseccfg predicate()
target/riscv: Allow debugger to access sstc CSRs
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Daniel Henrique Barboza <dbarboza@ventanamicro.com> says:
This is a re-send of patch 1, which is already reviewed, with a
follow-up that uses riscv_cpu_cfg() in the remaining of the file. This
was suggested by Weiwei Li in the "[PATCH 0/4] RISCVCPUConfig related
cleanups" review. Patch 1 makes the work of patch 2 easier since it
eliminated some uses of env_archcpu() we want to avoid.
* b4-shazam-merge:
target/riscv/vector_helper.c: avoid env_archcpu() when reading RISCVCPUConfig
target/riscv/vector_helper.c: create vext_set_tail_elems_1s()
Message-ID: <20230226170514.588071-1-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This file has several uses of env_archcpu() that are used solely to read
cfg->vlen. Use the new riscv_cpu_cfg() inline instead.
Suggested-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Weiwei Li<liweiwei@iscas.ac.cn>
Message-ID: <20230226170514.588071-3-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Commit 752614cab8 ("target/riscv: rvv: Add tail agnostic for vector
load / store instructions") added code to set the tail elements to 1 in
the end of vext_ldst_stride(), vext_ldst_us(), vext_ldst_index() and
vext_ldff(). Aside from a env->vl versus an evl value being used in the
first loop, the code is being repeated 4 times.
Create a helper to avoid code repetition in all those functions.
Arguments that are used in the callers (nf, esz and max_elems) are
passed as arguments. All other values are being derived inside the
helper.
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230226170514.588071-2-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Daniel Henrique Barboza <dbarboza@ventanamicro.com> says:
These cleanups were suggested by LIU Zhiwei during the review of
d3e6d5762b ("Merge patch series "make write_misa a no-op and FEATURE_*
cleanups"").
* b4-shazam-merge:
target/riscv/csr.c: avoid env_archcpu() usages when reading RISCVCPUConfig
target/riscv/csr.c: use riscv_cpu_cfg() to avoid env_cpu() pointers
target/riscv/csr.c: simplify mctr()
target/riscv/csr.c: use env_archcpu() in ctr()
Message-ID: <20230224174520.92490-1-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Retrieving the CPU pointer using env_archcpu() just to access cpu->cfg
can be avoided by using riscv_cpu_cfg().
Suggested-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230224174520.92490-5-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
A common trend in this file is to retrieve a RISCVCPU pointer by first
retrieving a CPUState pointer via env_cpu(). The CPU pointer is used
only to access the RISCVCPUConfig object and nothing else.
Let's use riscv_cpu_cfg() to access what we need directly without these
2 pointers.
Suggested-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230224174520.92490-4-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Use riscv_cpu_cfg() to retrieve pmu_num.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230224174520.92490-3-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
We don't need to use env_cpu() and CPUState().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230224174520.92490-2-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Weiwei Li <liweiwei@iscas.ac.cn> says:
This patchset adds support svadu extension. It also fixes some
relationship between *envcfg fields and Svpbmt/Sstc extensions.
Specification for Svadu extension can be found in:
https://github.com/riscv/riscv-svadu
* b4-shazam-merge:
target/riscv: Export Svadu property
target/riscv: Add *envcfg.HADE related check in address translation
target/riscv: Add *envcfg.PBMTE related check in address translation
target/riscv: Add csr support for svadu
target/riscv: Fix the relationship of PBMTE/STCE fields between menvcfg and henvcfg
target/riscv: Fix the relationship between menvcfg.PBMTE/STCE and Svpbmt/Sstc extensions
Message-ID: <20230224040852.37109-1-liweiwei@iscas.ac.cn>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Set it default true for backward compatibility
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230224040852.37109-7-liweiwei@iscas.ac.cn>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
When menvcfg.HADE is 1, hardware updating of PTE A/D bits is enabled
during single-stage address translation. When the hypervisor extension is
implemented, if menvcfg.HADE is 1, hardware updating of PTE A/D bits is
enabled during G-stage address translation.
Set *envcfg.HADE default true for backward compatibility.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230224040852.37109-6-liweiwei@iscas.ac.cn>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
menvcfg.PBMTE bit controls whether the Svpbmt extension is available
for use in S-mode and G-stage address translation.
henvcfg.PBMTE bit controls whether the Svpbmt extension is available
for use in VS-stage address translation.
Set *envcfg.PBMTE default true for backward compatibility.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230224040852.37109-5-liweiwei@iscas.ac.cn>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add ext_svadu property
Add HADE field in *envcfg:
* menvcfg.HADE is read-only zero if Svadu is not implemented.
* henvcfg.HADE is read-only zero if menvcfg.HADE is zero.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230224040852.37109-4-liweiwei@iscas.ac.cn>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
henvcfg.PBMTE/STCE are read-only zero if menvcfg.PBMTE/STCE are zero.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230224040852.37109-3-liweiwei@iscas.ac.cn>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
menvcfg.PBMTE/STCE are read-only zero if Svpbmt/Sstc are not implemented.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230224040852.37109-2-liweiwei@iscas.ac.cn>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The spec can be found in https://github.com/riscv/riscv-zicond.
Two instructions are added:
- czero.eqz: Moves zero to a register rd, if the condition rs2 is
equal to zero, otherwise moves rs1 to rd.
- czero.nez: Moves zero to a register rd, if the condition rs2 is
nonzero, otherwise moves rs1 to rd.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-ID: <20230221091009.36545-1-liweiwei@iscas.ac.cn>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The XTheadMemPair does not define any restrictions for store-pair
instructions (th.sdd or th.swd). However, the current code enforces
the restrictions that are required for load-pair instructions.
Let's fix this by removing this code.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20230220095612.1529031-1-christoph.muellner@vrull.eu>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This bug has a noticeable behavior of falling back to the main loop and
respawning a redundant translation block including a single instruction
when the end address of the compressive instruction is exactly on a page
boundary, and slows down running system performance.
Signed-off-by: Shaobo Song <songshaobo@eswincomputing.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230220072732.568-1-songshaobo@eswincomputing.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Bin Meng <bmeng@tinylab.org> says:
At present gdbstub reports an incorrect / incomplete CSR list in the
target description XML, for example:
- menvcfg is reported in 'sifive_u' machine
- fcsr is missing in a F/D enabled processor
The issue is caused by:
- priv spec version check is missing when reporting CSRs
- CSR predicate() routine is called without turning on the debugger flag
* b4-shazam-merge:
target/riscv: Group all predicate() routines together
target/riscv: Drop priv level check in mseccfg predicate()
target/riscv: Allow debugger to access sstc CSRs
target/riscv: Allow debugger to access {h, s}stateen CSRs
target/riscv: Allow debugger to access seed CSR
target/riscv: Allow debugger to access user timer and counter CSRs
target/riscv: gdbstub: Drop the vector CSRs in riscv-vector.xml
target/riscv: gdbstub: Turn on debugger mode before calling CSR predicate()
target/riscv: Avoid reporting odd-numbered pmpcfgX in the CSR XML for RV64
target/riscv: Simplify getting RISCVCPU pointer from env
target/riscv: Simplify {read, write}_pmpcfg() a little bit
target/riscv: Use 'bool' type for read_only
target/riscv: Coding style fixes in csr.c
target/riscv: gdbstub: Do not generate CSR XML if Zicsr is disabled
target/riscv: gdbstub: Minor change for better readability
target/riscv: Use g_assert() for the predicate() NULL check
target/riscv: Add some comments to clarify the priority policy of riscv_csrrw_check()
target/riscv: gdbstub: Check priv spec version before reporting CSR
Message-ID: <20230228104035.1879882-1-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Move sstc()/sstc32() to where all predicate() routines live, and
smstateen_acc_ok() to near {read,write}_xenvcfg().
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-ID: <20230228104035.1879882-19-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
