This patch adds the EBB exception support that are triggered by
Performance Monitor alerts. This happens when a Performance Monitor
alert occurs and MMCR0_EBE, BESCR_PME and BESCR_GE are set.
fire_PMC_interrupt() will execute the raise_ebb_perfm_exception() helper
which will check for MMCR0_EBE, BESCR_PME and BESCR_GE bits. If all bits
are set, do_ebb() will attempt to trigger a PERFM EBB event.
If the EBB facility is enabled in both FSCR and HFSCR we consider that
the EBB is valid and set BESCR_PMEO. After that, if we're running in
problem state, fire a POWERPC_EXCP_PERM_EBB immediately. Otherwise we'll
queue a PPC_INTERRUPT_EBB.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225101140.1054160-5-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
PPC_INTERRUPT_EBB is a new interrupt that will be used to deliver EBB
exceptions that had to be postponed because the thread wasn't in problem
state at the time the event-based branch was supposed to occur.
ISA 3.1 also defines two EBB exceptions: Performance Monitor EBB
exception and External EBB exception. They are being added as
POWERPC_EXCP_PERFM_EBB and POWERPC_EXCP_EXTERNAL_EBB.
PPC_INTERRUPT_EBB will check BESCR bits to see the EBB type that
occurred and trigger the appropriate exception. Both exceptions are
doing the same thing in this first implementation: clear BESCR_GE and
enter the branch with env->nip retrieved from SPR_EBBHR.
The checks being done by the interrupt code are msr_pr and BESCR_GE
states. All other checks (EBB facility check, BESCR_PME bit, specific
bits related to the event type) must be done beforehand.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220225101140.1054160-4-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There are still PMU exclusive bits to handle in fire_PMC_interrupt()
before implementing the EBB support. Let's finalize it now to avoid
dealing with PMU and EBB logic at the same time in the next patches.
fire_PMC_interrupt() will fire an Performance Monitor alert depending on
MMCR0_PMAE. If we are required to freeze the timers (MMCR0_FCECE) we'll
also need to update summaries and delete the existing overflow timers.
In all cases we're going to update the cycle counters.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220225101140.1054160-3-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This is an exclusive TCG helper. Gating it with CONFIG_TCG and changing
meson.build accordingly will prevent problems --disable-tcg and
--disable-linux-user later on.
We're also changing the uses of !kvm_enabled() to tcg_enabled() to avoid
adding "defined(CONFIG_TCG)" ifdefs, since tcg_enabled() will be
defaulted to false with --disable-tcg and the block will always be
skipped.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220225101140.1054160-2-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The dh_alias redirect is intended to handle TCG types as distinguished
from C types. TCG does not distinguish signed int from unsigned int,
because they are the same size. However, we need to retain this
distinction for dh_typecode, lest we fail to extend abi types properly
for the host call parameters.
This bug was detected when running the 'arm' emulator on an s390
system. The s390 uses TCG_TARGET_EXTEND_ARGS which triggers code
in tcg_gen_callN to extend 32 bit values to 64 bits; the incorrect
sign data in the typemask for each argument caused the values to be
extended as unsigned values.
This simple program exhibits the problem:
static volatile int num = -9;
static volatile int den = -5;
int main(void)
{
int quo = num / den;
printf("num %d den %d quo %d\n", num, den, quo);
exit(0);
}
When run on the broken qemu, this results in:
num -9 den -5 quo 0
The correct result is:
num -9 den -5 quo 1
Fixes: 7319d83a73 ("tcg: Combine dh_is_64bit and dh_is_signed to dh_typecode")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/876
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reported-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Tested-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
TCG implements everything we need to run basic z15 OS+software
Signed-off-by: David Miller <dmiller423@gmail.com>
Message-Id: <20220223223117.66660-3-dmiller423@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
implements:
AND WITH COMPLEMENT (NCRK, NCGRK)
NAND (NNRK, NNGRK)
NOT EXCLUSIVE OR (NXRK, NXGRK)
NOR (NORK, NOGRK)
OR WITH COMPLEMENT (OCRK, OCGRK)
SELECT (SELR, SELGR)
SELECT HIGH (SELFHR)
MOVE RIGHT TO LEFT (MVCRL)
POPULATION COUNT (POPCNT)
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/737
Signed-off-by: David Miller <dmiller423@gmail.com>
Message-Id: <20220223223117.66660-2-dmiller423@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We previously loaded into in1, but in1 is not filled during
disassembly and hence always zero. This leads to an assertion failure:
qemu-system-s390x: /home/nrb/qemu/include/tcg/tcg.h:654: temp_idx:
Assertion `n >= 0 && n < tcg_ctx->nb_temps' failed.`
Instead, use in2_la2_m64a to load from storage into in2 and pass that to
the helper, which matches what we already do for SCKC.
This fixes the SCK test I sent here under TCG:
<https://www.spinics.net/lists/kvm/msg265169.html>
Fixes: 9dc67537 ("s390x/tcg: implement SET CLOCK ")
Suggested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Message-Id: <20220126084201.774457-1-nrb@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* Some small fixes for the qtests
* Misc header cleanups by Philippe
-----BEGIN PGP SIGNATURE-----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=/azS
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2022-02-21' into staging
* Improve virtio-net failover test
* Some small fixes for the qtests
* Misc header cleanups by Philippe
# gpg: Signature made Mon 21 Feb 2022 11:40:37 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/thuth-gitlab/tags/pull-request-2022-02-21: (25 commits)
hw/tricore: Remove unused and incorrect header
hw/m68k/mcf: Add missing 'exec/hwaddr.h' header
exec/exec-all: Move 'qemu/log.h' include in units requiring it
softmmu/runstate: Clean headers
linux-user: Add missing "qemu/timer.h" include
target: Add missing "qemu/timer.h" include
core/ptimers: Remove unnecessary 'sysemu/cpus.h' include
exec/ramblock: Add missing includes
qtest: Add missing 'hw/qdev-core.h' include
hw/acpi/memory_hotplug: Remove unused 'hw/acpi/pc-hotplug.h' header
hw/remote: Add missing include
hw/tpm: Clean includes
scripts: Remove the old switch-timer-api script
tests/qtest: failover: migration abort test with failover off
tests/qtest: failover: test migration if the guest doesn't support failover
tests/qtest: failover: check migration with failover off
tests/qtest: failover: check missing guest feature
tests/qtest: failover: check the feature is correctly provided
tests/qtest: failover: use a macro for check_one_card()
tests/qtest: failover: clean up pathname of tests
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The last use of ENV_OFFSET was removed in 5e1401969b
("cpu: Move icount_decr to CPUNegativeOffsetState");
the commit of target/rx came in just afterward.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220203001252.37982-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
There is no 'vr' field in AVRCPUClass.
Likely a copy/paste typo from CRISCPUClass ;)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220122001036.83267-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The "hardware version" machinery (qemu_set_hw_version(),
qemu_hw_version(), and the QEMU_HW_VERSION define) is used by fewer
than 10 files. Move it out from osdep.h into a new
qemu/hw-version.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220208200856.3558249-6-peter.maydell@linaro.org
Currently we don't allow guests under hvf to use the PAuth extension,
because we didn't have any special code to handle that, and therefore
in arm_cpu_pauth_finalize() we will sanitize the ID_AA64ISAR1 value
the guest sees to clear the PAuth related fields.
Add support for this in the same way that KVM does it, by defaulting
to "PAuth enabled" if the host CPU has it and allowing the user to
disable it via '-cpu pauth=no' on the command line.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220204165506.2846058-7-peter.maydell@linaro.org
Currently when using hvf we mishandle '-cpu max': we fall through to
the TCG version of its initfn, which then sets a lot of feature bits
that the real host CPU doesn't have. The hvf accelerator code then
exposes these bogus ID register values to the guest because it
doesn't check that the host really has the features.
Make '-cpu host' be like '-cpu max' for hvf, as we do with kvm.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220204165506.2846058-6-peter.maydell@linaro.org
Now that the if() branch of the condition in aarch64_max_initfn()
returns early, we don't need to keep the rest of the code in
the function inside an else block. Remove the else, unindenting
that code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220204165506.2846058-5-peter.maydell@linaro.org
Currently for KVM the intention is that '-cpu max' and '-cpu host'
are the same thing, but because we did this with two separate
pieces of code they have got a little bit out of sync. Specifically,
'max' has a 'sve-max-vq' property, and 'host' does not.
Bring the two together by having the initfn for 'max' actually
call the initfn for 'host'. This will result in 'max' no longer
exposing the 'sve-max-vq' property when using KVM.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220204165506.2846058-4-peter.maydell@linaro.org
Use the aarch64_cpu_register() machinery to register the 'host' CPU
type. This doesn't gain us anything functionally, but it does mean
that the code for initializing it looks more like that for the other
CPU types, in that its initfn then doesn't need to call
arm_cpu_post_init() (because aarch64_cpu_instance_init() does that
for it).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220204165506.2846058-3-peter.maydell@linaro.org
Now that KVM has dropped AArch32 host support, the 'host' CPU type is
always AArch64, and we can move it to cpu64.c. This move will allow
us to share code between it and '-cpu max', which should behave
the same as '-cpu host' when using KVM or HVF.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220204165506.2846058-2-peter.maydell@linaro.org
Recent Linux versions added support to read ID_AA64ISAR2_EL1. On M1,
those reads trap into QEMU which handles them as faults.
However, AArch64 ID registers should always read as RES0. Let's
handle them accordingly.
This fixes booting Linux 5.17 guests.
Cc: qemu-stable@nongnu.org
Reported-by: Ivan Babrou <ivan@cloudflare.com>
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Message-id: 20220209124135.69183-2-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We are parsing the syndrome field for sysregs in multiple places across
the hvf code, but repeat shift/mask operations with hard coded constants
every time. This is an error prone approach and makes it harder to reason
about the correctness of these operations.
Let's introduce macros that allow us to unify the constants used as well
as create new helpers to extract fields from the sysreg value.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Cameron Esfahani <dirty@apple.com <mailto:dirty@apple.com>>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220209124135.69183-1-agraf@csgraf.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Many files use "qemu/log.h" declarations but neglect to include
it (they inherit it via "exec/exec-all.h"). "exec/exec-all.h" is
a core component and shouldn't be used that way. Move the
"qemu/log.h" inclusion locally to each unit requiring it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220207082756.82600-10-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
timer_new_ns(), cpu_get_host_ticks() and NANOSECONDS_PER_SECOND are
declared in "qemu/timer.h".
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220207082756.82600-8-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's leave cpu_init with just generic CPU initialization and
QOM-related functions.
The rest of the SPR registration functions will be moved in the
following patches along with the code that uses them. These are only
the commonly used ones.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-28-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
These will need to be accessed from other files once we move the CPUs
code to separate files.
The check_pow_hid0 and check_pow_hid0_74xx are too specific to be
moved to a header so I'll deal with them later when splitting this
code between the multiple CPU families.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-27-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Put the SPR registration macros in a header that is accessible outside
of cpu_init.c. The following patches will move CPU-specific code to
separate files and will need to access it.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-26-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The following patches will move CPU-specific code into separate files,
so expose the most used SPR registration functions:
register_sdr1_sprs | 22 callers
register_low_BATs | 20 callers
register_non_embedded_sprs | 19 callers
register_high_BATs | 10 callers
register_thrm_sprs | 8 callers
register_usprgh_sprs | 6 callers
register_6xx_7xx_soft_tlb | only 3 callers, but it helps to
keep the soft TLB code consistent.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-25-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Initial intent for the spr_tcg header was to expose the spr_read|write
callbacks that are only used by TCG code. However, although these
routines are TCG-specific, the KVM code needs access to env->sprs
which creation is currently coupled to the callback registration.
We are probably not going to decouple SPR creation and TCG callback
registration any time soon, so let's rename the header to spr_common
to accomodate the register_*_sprs functions that will be moved out of
cpu_init.c in the following patches.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-24-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This function registers just one SPR and has only two callers, so open
code it.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-23-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The important part of this function is that it applies to non-embedded
CPUs, not that it also applies to the 601. We removed support for the
601 anyway, so rename this function.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-22-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The init_proc_755 function is identical to the 745 one except for the
755-specific registers. I think it is worth it to make them share
code.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-21-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
init_proc_603 is defined after init_proc_e300, so I had to move some
code around to make it work.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-19-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This is done to improve init_proc readability and to make subsequent
patches that touch this code a bit cleaner.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-18-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This is done to improve init_proc readability and to make subsequent
patches that touch this code a bit cleaner.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-17-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This is just to have 755-specific registers contained into a function,
intead of leaving them open-coded in init_proc_755. It makes init_proc
easier to read and keeps later patches that touch this code a bit
cleaner.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-16-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 745 and 755 can share the HID registration, so move it all into
register_755_sprs, which applies for both CPUs.
Also rename that function to register_745_sprs, since the 745 is the
earliest of the two. This will help with separating 755-specific
registers in a subsequent patch.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-14-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Move some of the 440 registers that are being repeated in the 440*
CPUs to register_440_sprs.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-11-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We're considering these two to be from different CPU families, so
duplicate some code to keep them separate.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-10-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We're considering these two to be in different CPU families (6xx and
7xx), so keep their SPR registration separate.
The code was copied into register_G2_sprs and the common function was
renamed to apply only to the 755.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-9-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Make sure that every register_*_sprs function only has calls to
spr_register* to register individual SPRs. Do not allow nesting. This
makes the code easier to follow and a look at init_proc_* should
suffice to know what SPRs a CPU has.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-6-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Now that the 601 was removed, all of our CPUs have a timebase, so that
can be moved into the common function.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The top level init_proc calls register_generic_sprs but also registers
some other SPRs outside of that function. Let's group everything into
a single place.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-4-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The G2LE CPU initialization code is the same as the G2. Use the latter
for both.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-3-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The /* XXX : not implemented */ comments all over cpu_init are
confusing and ambiguous.
Do they mean not implemented by QEMU, not implemented in a specific
access mode? Not implemented by the CPU? Do they apply to just the
register right after or to a whole block? Do they mean we have an
action to take in the future to implement these? Are they only
informative?
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-2-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Introduce virtual hypervisor methods that can support a "Nested KVM HV"
implementation using the bare metal 2-level radix MMU, and using HV
exceptions to return from H_ENTER_NESTED (rather than cause interrupts).
HV exceptions can now be raised in the TCG spapr machine when running a
nested KVM HV guest. The main ones are the lev==1 syscall, the hdecr,
hdsi and hisi, hv fu, and hv emu, and h_virt external interrupts.
HV exceptions are intercepted in the exception handler code and instead
of causing interrupts in the guest and switching the machine to HV mode,
they go to the vhyp where it may exit the H_ENTER_NESTED hcall with the
interrupt vector numer as return value as required by the hcall API.
Address translation is provided by the 2-level page table walker that is
implemented for the bare metal radix MMU. The partition scope page table
is pointed to the L1's partition scope by the get_pate vhc method.
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220216102545.1808018-9-npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This moves the logic to reset the QEMU exception state into its own
function.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[ clg: checkpatch fixes ]
Message-Id: <20220216102545.1808018-8-npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The virtual hypervisor currently always intercepts and handles
hypercalls but with a future change this will not always be the case.
Add a helper for the test so the logic is abstracted from the mechanism.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20220216102545.1808018-7-npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
In prepartion for implementing a full partition table option for
vhyp, update the get_pate method to take an lpid and return a
success/fail indicator.
The spapr implementation currently just asserts lpid is always 0
and always return success.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[ clg: checkpatch fixes ]
Message-Id: <20220216102545.1808018-6-npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The radix on vhyp MMU uses a single-level radix table walk, with the
partition scope mapping provided by the flat QEMU machine memory.
A subsequent change will use the two-level radix walk on vhyp in some
situations, so provide a helper which can abstract that logic.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20220216102545.1808018-5-npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Invalid or missing partition table entry exceptions should cause HV
interrupts. HDSISR is set to bad MMU config, which is consistent with
the ISA and experimentally matches what POWER9 generates.
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[ clg: checkpatch fixes ]
Message-Id: <20220216102545.1808018-2-npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
- add PTE_PBMT bits: It uses two PTE bits, but otherwise has no effect on QEMU, since QEMU is sequentially consistent and doesn't model PMAs currently
- add PTE_PBMT bit check for inner PTE
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220204022658.18097-6-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- sinval.vma, hinval.vvma and hinval.gvma do the same as sfence.vma, hfence.vvma and hfence.gvma except extension check
- do nothing other than extension check for sfence.w.inval and sfence.inval.ir
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220204022658.18097-5-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- add PTE_N bit
- add PTE_N bit check for inner PTE
- update address translation to support 64KiB continuous region (napot_bits = 4)
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220204022658.18097-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
For non-leaf PTEs, the D, A, and U bits are reserved for future standard use.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220204022658.18097-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Highest bits of PTE has been used for svpbmt, ref: [1], [2], so we
need to ignore them. They cannot be a part of ppn.
1: The RISC-V Instruction Set Manual, Volume II: Privileged Architecture
4.4 Sv39: Page-Based 39-bit Virtual-Memory System
4.5 Sv48: Page-Based 48-bit Virtual-Memory System
2: https://github.com/riscv/virtual-memory/blob/main/specs/663-Svpbmt-diff.pdf
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Reviewed-by: Liu Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220204022658.18097-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We add "x-aia" command-line option for RISC-V HART using which
allows users to force enable CPU AIA CSRs without changing the
interrupt controller available in RISC-V machine.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-18-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The AIA specification defines IMSIC interface CSRs for easy access
to the per-HART IMSIC registers without using indirect xiselect and
xireg CSRs. This patch implements the AIA IMSIC interface CSRs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-16-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The AIA specification introduces new [m|s|vs]topi CSRs for
reporting pending local IRQ number and associated IRQ priority.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-14-anup@brainfault.org
[ Changed by AF:
- Fixup indentation
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The AIA specificaiton adds interrupt filtering support for M-mode
and HS-mode. Using AIA interrupt filtering M-mode and H-mode can
take local interrupt 13 or above and selectively inject same local
interrupt to lower privilege modes.
At the moment, we don't have any local interrupts above 12 so we
add dummy implementation (i.e. read zero and ignore write) of AIA
interrupt filtering CSRs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-13-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The AIA hvictl and hviprioX CSRs allow hypervisor to control
interrupts visible at VS-level. This patch implements AIA hvictl
and hviprioX CSRs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-12-anup@brainfault.org
[ Changes by AF:
- Fix possible unintilised variable error in rmw_sie()
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The AIA specification adds new CSRs for RV32 so that RISC-V hart can
support 64 local interrupts on both RV32 and RV64.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-11-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The AIA spec defines programmable 8-bit priority for each local interrupt
at M-level, S-level and VS-level so we extend local interrupt processing
to consider AIA interrupt priorities. The AIA CSRs which help software
configure local interrupt priorities will be added by subsequent patches.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220204174700.534953-10-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The AIA device emulation (such as AIA IMSIC) should be able to set
(or provide) AIA ireg read-modify-write callback for each privilege
level of a RISC-V HART.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-9-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The RISC-V AIA specification extends RISC-V local interrupts and
introduces new CSRs. This patch adds defines for the new AIA CSRs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-8-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We define a CPU feature for AIA CSR support in RISC-V CPUs which
can be set by machine/device emulation. The RISC-V CSR emulation
will also check this feature for emulating AIA CSRs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-7-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The machine or device emulation should be able to force set certain
CPU features because:
1) We can have certain CPU features which are in-general optional
but implemented by RISC-V CPUs on the machine.
2) We can have devices which require a certain CPU feature. For example,
AIA IMSIC devices expect AIA CSRs implemented by RISC-V CPUs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-6-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The guest external interrupts from an interrupt controller are
delivered only when the Guest/VM is running (i.e. V=1). This means
any guest external interrupt which is triggered while the Guest/VM
is not running (i.e. V=0) will be missed on QEMU resulting in Guest
with sluggish response to serial console input and other I/O events.
To solve this, we check and inject interrupt after setting V=1.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-5-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The hgeie and hgeip CSRs are required for emulating an external
interrupt controller capable of injecting virtual external interrupt
to Guest/VM running at VS-level.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-4-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
A hypervisor can optionally take guest external interrupts using
SGEIP bit of hip and hie CSRs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20220204174700.534953-3-anup@brainfault.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The guest should be able to set the vill bit as part of vsetvl.
Currently we may set env->vill to 1 in the vsetvl helper, but there
is nowhere that we set it to 0, so once it transitions to 1 it's stuck
there until the system is reset.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220201064601.41143-1-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This adds the decoder and translation for the XVentanaCondOps custom
extension (vendor-defined by Ventana Micro Systems), which is
documented at https://github.com/ventanamicro/ventana-custom-extensions/releases/download/v1.0.0/ventana-custom-extensions-v1.0.0.pdf
This commit then also adds a guard-function (has_XVentanaCondOps_p)
and the decoder function to the table of decoders, enabling the
support for the XVentanaCondOps extension.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220202005249.3566542-7-philipp.tomsich@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
To split up the decoder into multiple functions (both to support
vendor-specific opcodes in separate files and to simplify maintenance
of orthogonal extensions), this changes decode_op to iterate over a
table of decoders predicated on guard functions.
This commit only adds the new structure and the table, allowing for
the easy addition of additional decoders in the future.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220202005249.3566542-6-philipp.tomsich@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Zb[abcs] support code still uses the RISCV_CPU macros to access
the configuration information (i.e., check whether an extension is
available/enabled). Now that we provide this information directly
from DisasContext, we can access this directly via the cfg_ptr field.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220202005249.3566542-5-philipp.tomsich@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The implementation in trans_{rvi,rvv,rvzfh}.c.inc accesses the shallow
copies (in DisasContext) of some of the elements available in the
RISCVCPUConfig structure. This commit redirects accesses to use the
cfg_ptr copied into DisasContext and removes the shallow copies.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220202005249.3566542-4-philipp.tomsich@vrull.eu>
[ Changes by AF:
- Fixup checkpatch failures
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
As the number of extensions is growing, copying them individiually
into the DisasContext will scale less and less... instead we populate
a pointer to the RISCVCPUConfig structure in the DisasContext.
This adds an extra indirection when checking for the availability of
an extension (compared to copying the fields into DisasContext).
While not a performance problem today, we can always (shallow) copy
the entire structure into the DisasContext (instead of putting a
pointer to it) if this is ever deemed necessary.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220202005249.3566542-3-philipp.tomsich@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220202005249.3566542-2-philipp.tomsich@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The addition of uxl support in gdbstub adds a few checks on the maximum
register length, but omitted MXL_RV128, an experimental feature.
This patch makes rv128 react as rv64, as previously.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220124202456.420258-1-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
I think these have been wrong since f193c7979c (do not depend on
thunk.h - more log items). Fix them so as not to confuse other
debugging.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220204204335.1689602-26-alex.bennee@linaro.org>
ISA v3.1 changed some VSX instructions behavior by changing what the
other words/doubleword in the result should contain when the result is
only one word/doubleword. e.g. xsmaxdp operates on doubleword 0 and
saves the result also in doubleword 0.
Before, the second doubleword result was undefined according to the
ISA, but now it's stated that it should be zeroed.
Even tough the result was undefined before, hardware implementing these
instructions already filled these fields with 0s. Changing every ISA
version in QEMU to this behavior makes the results match what happens
in hardware.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220204181944.65063-1-victor.colombo@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We don't really need to check for exception model while applying
AIL. We can check the lpcr_mask for the presence of
LPCR_AIL/LPCR_HAIL.
This removes one more instance of passing the exception model ID
around.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220207183036.1507882-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We currently abort QEMU during the dispatch of an interrupt if we try
to set MSR_HV without having MSR_HVB in the msr_mask. I think we
should verify this for all MSR bits. There is no reason to ever have a
MSR bit set if the corresponding bit is not set in that CPU's
msr_mask.
Note that this is not about the emulated code setting reserved
bits. We clear the new_msr when starting to dispatch an exception, so
if we end up with bits not present in the msr_mask that is a QEMU
programming error.
I kept the HSRR verification for BookS because it is the only CPU
family that has HSRRs.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220207183036.1507882-4-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Make the cpu-specific powerpc_excp_* functions a bit simpler by moving
the bounds check and logging to powerpc_excp.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220207183036.1507882-3-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Now that all CPU families have their own separate exception
dispatching code we can remove powerpc_excp_legacy.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220207183036.1507882-2-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 7xx CPUs don't have alternate/hypervisor Save and Restore
Registers, so we can set SRR0 and SRR1 directly.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-11-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This code applies only to the 7xx CPUs, so we can remove the switch
statement.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-10-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Thre is no HV support in the 7xx.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-9-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Remove the BookE code and add a comment explaining why we need to keep
hypercall support even though this CPU does not have a hypervisor
mode.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-8-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There's no ESR in the 7xx.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-7-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There is no MSR_HV in the 7xx so remove the LPES0 handling.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-6-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There's no MSR_HV in the 7xx.
Also remove 40x and BookE code.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Differences from the generic powerpc_excp code:
- Not BookE, so some MSR bits are cleared at interrupt dispatch;
- No MSR_HV;
- No power saving states;
- No Hypervisor Emulation Assistance;
- Not 64 bits;
- No System call vectored;
- No Alternate Interrupt Location.
Exceptions used:
POWERPC_EXCP_ALIGN
POWERPC_EXCP_DECR
POWERPC_EXCP_DLTLB
POWERPC_EXCP_DSI
POWERPC_EXCP_DSTLB
POWERPC_EXCP_EXTERNAL
POWERPC_EXCP_FPU
POWERPC_EXCP_IABR
POWERPC_EXCP_IFTLB
POWERPC_EXCP_ISI
POWERPC_EXCP_MCHECK
POWERPC_EXCP_PERFM
POWERPC_EXCP_PROGRAM
POWERPC_EXCP_RESET
POWERPC_EXCP_SMI
POWERPC_EXCP_SYSCALL
POWERPC_EXCP_THERM
POWERPC_EXCP_TRACE
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-4-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Introduce a new powerpc_excp function specific for PowerPC 7xx CPUs
(740, 745, 750, 750cl, 750cx, 750fx, 750gx, 755). This commit copies
powerpc_excp_legacy verbatim so the next one has a clean diff.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-3-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Since we've split the exception code by exception model, the exception
model IDs are becoming less useful. These two can be merged.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-2-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 6xx CPUs don't have alternate/hypervisor Save and Restore
Registers, so we can set SRR0 and SRR1 directly.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220203200957.1434641-12-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This code applies only to the 6xx CPUs, so we can remove the switch
statement.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220203200957.1434641-11-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There is no HV support in the 6xx.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220203200957.1434641-10-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There is no Hypervisor mode in the 6xx CPUs.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220203200957.1434641-9-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There's no ESR in the 6xx CPUs.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220203200957.1434641-8-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There's no Hypervisor mode in the 6xx, so remove all LPES0 logic.
Also remove BookE IRQ code.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220203200957.1434641-7-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There's no MSR_HV in the 6xx CPUs.
Also remove the 40x and BookE code.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220203200957.1434641-6-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This only applies to the G2s, the other 6xx CPUs will not have this
vector registered.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220203200957.1434641-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Introduce a new powerpc_excp function specific for PowerPC 6xx CPUs
(603, 604, G2, MPC5xx, MCP8xx). This commit copies powerpc_excp_legacy
verbatim so the next one has a clean diff.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220203200957.1434641-3-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We don't need three separate exception model IDs for the 603, 604 and
G2.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220203200957.1434641-2-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The PowerPC 601 processor is the first generation of processors to
implement the PowerPC architecture. It was designed as a bridge
processor and also could execute most of the instructions of the
previous POWER architecture. It was found on the first Macs and IBM
RS/6000 workstations.
There is not much interest in keeping the CPU model of this
POWER-PowerPC bridge processor. We have the 603 and 604 CPU models of
the 60x family which implement the complete PowerPC instruction set.
Cc: "Hervé Poussineau" <hpoussin@reactos.org>
Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220203142756.1302515-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
ppc_radix64_partition_scoped_xlate() logs the host page protection
bits variable but it is uninitialized. The value is set later on in
ppc_radix64_check_prot(). Remove the output.
Fixes: Coverity CID 1468942
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20220203142145.1301749-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There is no MSR_HV in BookE, so remove all of the HV logic.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220128224018.1228062-12-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Remove the switch as this function applies to BookE only.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220128224018.1228062-11-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
QEMU does not support BookE as a hypervisor.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220128224018.1228062-10-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
BookE has no DSISR or DAR. The proper registers ESR and DEAR were
already set at this point.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220128224018.1228062-9-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There is no LPES0 in BookE and no MSR_HV.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220128224018.1228062-8-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The SRR1 should be set to the MSR value. There are no diagnostic bits
in the SRR1 for BookE.
Note that this fixes a bug where MSR_GS would be set and Linux would
go into KVM code when there's no KVM guest.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220128224018.1228062-7-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There is no DSISR or DAR in BookE. Change to ESR and DEAR.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220128224018.1228062-6-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There's no MSR_HV in BookE.
Also remove 40x code.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220128224018.1228062-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Introduce a new powerpc_excp function specific for BookE CPUs. This
commit copies powerpc_excp_legacy verbatim so the next one has a clean
diff.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220128224018.1228062-2-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This CPU was partially removed due to lack of support in 2017 by commit
aef7796057 ("ppc: remove non implemented cpu models").
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220128221611.1221715-1-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The recently introduced debug tests in kvm-unit-tests exposed an error
in our handling of singlestep cause by stale hflags. This is caught by
--enable-debug-tcg when running the tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reported-by: Andrew Jones <drjones@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220202122353.457084-1-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The SMCCC 1.3 spec section 5.2 says
The Unknown SMC Function Identifier is a sign-extended value of (-1)
that is returned in the R0, W0 or X0 registers. An implementation must
return this error code when it receives:
* An SMC or HVC call with an unknown Function Identifier
* An SMC or HVC call for a removed Function Identifier
* An SMC64/HVC64 call from AArch32 state
To comply with these statements, let's always return -1 when we encounter
an unknown HVC or SMC call.
[PMM:
This is a reinstatement of commit 9fcd15b919, previously
reverted in commit 4825eaae4fdd56fba0f; we can do this now that we
have arranged for all the affected board models to not enable the
PSCI emulation if they are running guest code at EL3. This avoids
the regressions that caused us to revert the change for 7.0.]
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We want to allow the psci-conduit property to be set after realize,
because the parts of the code which are best placed to decide if it's
OK to enable QEMU's builtin PSCI emulation (the board code and the
arm_load_kernel() function are distant from the code which creates
and realizes CPUs (typically inside an SoC object's init and realize
method) and run afterwards.
Since the DEFINE_PROP_* macros don't have support for creating
properties which can be changed after realize, change the property to
be created with object_property_add_uint32_ptr(), which is what we
already use in this function for creating settable-after-realize
properties like init-svtor and init-nsvtor.
Note that it doesn't conceptually make sense to change the setting of
the property after the machine has been completely initialized,
beacuse this would mean that the behaviour of the machine when first
started would differ from its behaviour when the system is
subsequently reset. (It would also require the underlying state to
be migrated, which we don't do.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20220127154639.2090164-2-peter.maydell@linaro.org
Use the named bit rather than a bare extract32.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Message-id: 20220127063428.30212-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When HCR_EL2.E2H is set, the format of CPTR_EL2 changes to
look more like CPACR_EL1, with ZEN and FPEN fields instead
of TZ and TFP fields.
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220127063428.30212-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Extract entire fields for ZEN and FPEN, rather than testing specific bits.
This makes it easier to follow the code versus the ARM spec.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Message-id: 20220127063428.30212-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patchset fixes some important bugs in the hppa artist graphics driver:
- Fix artist graphics for HP-UX and Linux
- Mouse cursor fixes for HP-UX
- Fix draw_line() function on artist graphic
and it adds new qemu features for hppa:
- Allow up to 16 emulated CPUs (instead of 8)
- Add support for an emulated TOC/NMI button
A new Seabios-hppa firmware is included as well:
- Update SeaBIOS-hppa to VERSION 3
- New opt/hostid fw_cfg option to change hostid
- Add opt/console fw_cfg option to select default console
- Added 16x32 font to STI firmware
Signed-off-by: Helge Deller <deller@gmx.de>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYfrIogAKCRD3ErUQojoP
X93ZAP9hqp/FCz/goH7Tpqce6FspHriJm6Ej2Rd7HxZWmh4bpQD/cMjY8qpcA/6r
Nx4bgRPT6kCZwwLx7v2jZ2QsA2KaZAM=
=c0qO
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/hdeller/tags/hppa-updates-pull-request' into staging
Fixes and updates for hppa target
This patchset fixes some important bugs in the hppa artist graphics driver:
- Fix artist graphics for HP-UX and Linux
- Mouse cursor fixes for HP-UX
- Fix draw_line() function on artist graphic
and it adds new qemu features for hppa:
- Allow up to 16 emulated CPUs (instead of 8)
- Add support for an emulated TOC/NMI button
A new Seabios-hppa firmware is included as well:
- Update SeaBIOS-hppa to VERSION 3
- New opt/hostid fw_cfg option to change hostid
- Add opt/console fw_cfg option to select default console
- Added 16x32 font to STI firmware
Signed-off-by: Helge Deller <deller@gmx.de>
# gpg: Signature made Wed 02 Feb 2022 18:08:34 GMT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* remotes/hdeller/tags/hppa-updates-pull-request:
hw/display/artist: Fix draw_line() artefacts
hw/display/artist: Mouse cursor fixes for HP-UX
hw/display/artist: rewrite vram access mode handling
hppa: Add support for an emulated TOC/NMI button.
hw/hppa: Allow up to 16 emulated CPUs
seabios-hppa: Update SeaBIOS-hppa to VERSION 3
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Almost all PA-RISC machines have either a button that is labeled with 'TOC' or
a BMC/GSP function to trigger a TOC. TOC is a non-maskable interrupt that is
sent to the processor. This can be used for diagnostic purposes like obtaining
a stack trace/register dump or to enter KDB/KGDB in Linux.
This patch adds support for such an emulated TOC button.
It wires up the qemu monitor "nmi" command to trigger a TOC. For that it
provides the hppa_nmi function which is assigned to the nmi_monitor_handler
function pointer. When called it raises the EXCP_TOC hardware interrupt in the
hppa_cpu_do_interrupt() function. The interrupt function then calls the
architecturally defined TOC function in SeaBIOS-hppa firmware (at fixed address
0xf0000000).
According to the PA-RISC PDC specification, the SeaBIOS firmware then writes
the CPU registers into PIM (processor internal memmory) for later analysis. In
order to write all registers it needs to know the contents of the CPU "shadow
registers" and the IASQ- and IAOQ-back values. The IAOQ/IASQ values are
provided by qemu in shadow registers when entering the SeaBIOS TOC function.
This patch adds a new aritificial opcode "getshadowregs" (0xfffdead2) which
restores the original values of the shadow registers. With this opcode SeaBIOS
can store those registers as well into PIM before calling an OS-provided TOC
handler.
To trigger a TOC, switch to the qemu monitor with Ctrl-A C, and type in the
command "nmi". After the TOC started the OS-debugger, exit the qemu monitor
with Ctrl-A C.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Hi
This time I have disabled vmstate canary patches form Dave Gilbert.
Let's see if it works.
Later, Juan.
-----BEGIN PGP SIGNATURE-----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=F/ek
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/quintela-gitlab/tags/migration-20220128-pull-request' into staging
Migration Pull request (Take 2)
Hi
This time I have disabled vmstate canary patches form Dave Gilbert.
Let's see if it works.
Later, Juan.
# gpg: Signature made Fri 28 Jan 2022 18:30:25 GMT
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* remotes/quintela-gitlab/tags/migration-20220128-pull-request: (36 commits)
migration: Move temp page setup and cleanup into separate functions
migration: Simplify unqueue_page()
migration: Add postcopy_has_request()
migration: Enable UFFD_FEATURE_THREAD_ID even without blocktime feat
migration: No off-by-one for pss->page update in host page size
migration: Tally pre-copy, downtime and post-copy bytes independently
migration: Introduce ram_transferred_add()
migration: Don't return for postcopy_send_discard_bm_ram()
migration: Drop return code for disgard ram process
migration: Do chunk page in postcopy_each_ram_send_discard()
migration: Drop postcopy_chunk_hostpages()
migration: Don't return for postcopy_chunk_hostpages()
migration: Drop dead code of ram_debug_dump_bitmap()
migration/ram: clean up unused comment.
migration: Report the error returned when save_live_iterate fails
migration/migration.c: Remove the MIGRATION_STATUS_ACTIVE when migration finished
migration/migration.c: Avoid COLO boot in postcopy migration
migration/migration.c: Add missed default error handler for migration state
Remove unnecessary minimum_version_id_old fields
multifd: Rename pages_used to normal_pages
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 602 was derived from the PowerPC 603, for the gaming market it
seems. It was hardly used and no firmware supporting the CPU could be
found. Drop support.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The migration code will not look at a VMStateDescription's
minimum_version_id_old field unless that VMSD has set the
load_state_old field to something non-NULL. (The purpose of
minimum_version_id_old is to specify what migration version is needed
for the code in the function pointed to by load_state_old to be able
to handle it on incoming migration.)
We have exactly one VMSD which still has a load_state_old,
in the PPC CPU; every other VMSD which sets minimum_version_id_old
is doing so unnecessarily. Delete all the unnecessary ones.
Commit created with:
sed -i '/\.minimum_version_id_old/d' $(git grep -l '\.minimum_version_id_old')
with the one legitimate use then hand-edited back in.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
It missed vmstate_ppc_cpu.
The exception caused by an SVC instruction may be taken to AArch32
Hyp mode for two reasons:
* HCR.TGE indicates that exceptions from EL0 should trap to EL2
* we were already in Hyp mode
The entrypoint in the vector table to be used differs in these two
cases: for an exception routed to Hyp mode from EL0, we enter at the
common 0x14 "hyp trap" entrypoint. For SVC from Hyp mode to Hyp
mode, we enter at the 0x08 (svc/hvc trap) entrypoint.
In the v8A Arm ARM pseudocode this is done in AArch32.TakeSVCException.
QEMU incorrectly routed both of these exceptions to the 0x14
entrypoint. Correct the entrypoint for SVC from Hyp to Hyp by making
use of the existing logic which handles "normal entrypoint for
Hyp-to-Hyp, otherwise 0x14" for traps like UNDEF and data/prefetch
aborts (reproduced here since it's outside the visible context
in the diff for this commit):
if (arm_current_el(env) != 2 && addr < 0x14) {
addr = 0x14;
}
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220117131953.3936137-1-peter.maydell@linaro.org
In an SMP system it can be unclear which CPU is taking an exception;
add the CPU index (which is the same value used in the TCG 'Trace
%d:' logging) to the "Taking exception" log line to clarify it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-2-peter.maydell@linaro.org
The 74xx does not have alternate/hypervisor Save and Restore
Registers, so we can set SRR0 and SRR1 directly.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220127201116.1154733-9-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The whole power saving states logic seems to be dependent on HV mode,
which don't exist for 74xx so I'm removing it all and leaving the
abort message.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220127201116.1154733-8-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Remove the BookE code and add a comment explaining why we need to keep
hypercall support even though this CPU does not have a hypervisor
mode.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220127201116.1154733-7-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 74xx don't have MSR_HV so all the LPES0 logic can be removed.
Also remove the BookE IRQ code.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220127201116.1154733-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 74xx don't have an MSR_HV.
Also remove 40x and BookE code.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220127201116.1154733-4-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Differences from the generic powerpc_excp code:
- Not BookE, so some MSR bits are cleared at interrupt dispatch;
- No MSR_HV;
- No power saving states;
- No Hypervisor Emulation Assistance;
- Not 64 bits;
- No System call vectored;
- No Alternate Interrupt Location.
Exceptions used:
POWERPC_EXCP_ALIGN
POWERPC_EXCP_DECR
POWERPC_EXCP_DSI
POWERPC_EXCP_EXTERNAL
POWERPC_EXCP_FPU
POWERPC_EXCP_IABR
POWERPC_EXCP_ISI
POWERPC_EXCP_MCHECK
POWERPC_EXCP_PERFM
POWERPC_EXCP_PROGRAM
POWERPC_EXCP_RESET
POWERPC_EXCP_SMI
POWERPC_EXCP_SYSCALL
POWERPC_EXCP_THERM
POWERPC_EXCP_TRACE
POWERPC_EXCP_VPU
POWERPC_EXCP_VPUA
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220127201116.1154733-3-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Introduce a new powerpc_excp function specific for PowerPC 74xx
CPUs. This commit copies powerpc_excp_legacy verbatim so the next one
has a clean diff.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220127201116.1154733-2-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Since this is now BookS only, we can simplify the code a bit and check
has_hv_mode instead of enumerating the exception models. LPES0 does
not make sense if there is no MSR_HV.
Note that QEMU does not support HV mode on 970 and POWER5+ so we don't
set MSR_HV in msr_mask.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220124184605.999353-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Differences from the generic powerpc_excp code:
- Not BookE, so some MSR bits are cleared at interrupt dispatch;
- Always uses HV_EMU if the CPU has MSR_HV;
- Exceptions always delivered in 64 bit.
Exceptions used:
POWERPC_EXCP_ALIGN
POWERPC_EXCP_DECR
POWERPC_EXCP_DSEG
POWERPC_EXCP_DSI
POWERPC_EXCP_EXTERNAL
POWERPC_EXCP_FPU
POWERPC_EXCP_FU
POWERPC_EXCP_HDECR
POWERPC_EXCP_HDSI
POWERPC_EXCP_HISI
POWERPC_EXCP_HVIRT
POWERPC_EXCP_HV_EMU
POWERPC_EXCP_HV_FU
POWERPC_EXCP_ISEG
POWERPC_EXCP_ISI
POWERPC_EXCP_MAINT
POWERPC_EXCP_MCHECK
POWERPC_EXCP_PERFM
POWERPC_EXCP_PROGRAM
POWERPC_EXCP_RESET
POWERPC_EXCP_SDOOR_HV
POWERPC_EXCP_SYSCALL
POWERPC_EXCP_SYSCALL_VECTORED
POWERPC_EXCP_THERM
POWERPC_EXCP_TRACE
POWERPC_EXCP_VPU
POWERPC_EXCP_VPUA
POWERPC_EXCP_VSXU
POWERPC_EXCP_HV_MAINT
POWERPC_EXCP_SDOOR
(I added the two above that were not being considered. They used to be
"Invalid exception". Now they become "Unimplemented exception" which
is more accurate.)
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220124184605.999353-3-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Introduce a new powerpc_excp function specific for BookS CPUs. This
commit copies powerpc_excp_legacy verbatim so the next one has a clean
diff.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220124184605.999353-2-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 405 Program Interrupt does not set SRR1 with any diagnostic bits,
just a clean copy of the MSR.
We're using the BookE Exception Syndrome Register which is different
from the 405.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: restored SPR_40x_ESR settings ]
Message-Id: <20220118184448.852996-14-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 405 ISI does not set SRR1 with any exception syndrome bits, only a
clean copy of the MSR.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg : Fixed removal which was done in the wrong routine ]
Message-Id: <20220118184448.852996-13-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 405 has no DSISR or DAR, so convert the trace entry to
use ESR and DEAR instead.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg : - changed registers to ESR and DEAR.
- updated commit log ]
Message-Id: <20220118184448.852996-12-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The current Debug exception dispatch is the BookE one, so it is
different from the 405. We effectively don't support the 405 Debug
exception.
This patch removes the BookE code and moves the DEBUG into the "not
implemented" block.
Note that there is in theory a functional change here since we now
abort when a Debug exception happens. However, given how it was never
implemented, I don't believe this to have ever been dispatched for the
405.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220118184448.852996-11-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There is no DSISR in the 405. It uses DEAR which we already set
earlier at ppc_cpu_do_unaligned_access.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au
Message-Id: <20220118184448.852996-10-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
405 has no MSR_HV and EPR is BookE only so we can remove it all.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220118184448.852996-8-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
powerpc_excp_40x applies only to the 405, so remove HV code and
references to BookE.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220118184448.852996-7-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
In powerpc_excp_40x the Critical exception is now for 405 only, so we
can remove the BookE and G2 blocks.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220118184448.852996-6-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Differences from the generic powerpc_excp code:
- Not BookE, so some MSR bits are cleared at interrupt dispatch;
- No MSR_HV or MSR_LE;
- No power saving states;
- No Hypervisor Emulation Assistance;
- Not 64 bits;
- No System call vectored;
- No Interrupts Little Endian;
- No Alternate Interrupt Location.
Exceptions used:
POWERPC_EXCP_ALIGN
POWERPC_EXCP_CRITICAL
POWERPC_EXCP_DEBUG
POWERPC_EXCP_DSI
POWERPC_EXCP_DTLB
POWERPC_EXCP_EXTERNAL
POWERPC_EXCP_FIT
POWERPC_EXCP_ISI
POWERPC_EXCP_ITLB
POWERPC_EXCP_MCHECK
POWERPC_EXCP_PIT
POWERPC_EXCP_PROGRAM
POWERPC_EXCP_SYSCALL
POWERPC_EXCP_WDT
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220118184448.852996-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Introduce a new powerpc_excp function specific for 40x CPUs. This
commit copies powerpc_excp_legacy verbatim so the next one has a clean
diff.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220118184448.852996-4-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 405 MSR has the Machine Check Enable bit. We're making use of it
when dispatching Machine Check, so add the bit to the msr_mask.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220118184448.852996-3-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Bit 13 is the Wait State Enable bit. Give it its proper name.
As far as I can see we don't do anything with MSR_POW for the 405, so
this change has no effect.
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220118184448.852996-2-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Commit cd0c6f4735 did not take into account 405 CPUs when adding
support to batching of TCG tlb flushes. Set the TLB_NEED_LOCAL_FLUSH
flag when the SPR_40x_PID is set or a TLB updated.
Cc: Thomas Huth <thuth@redhat.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Fixes: cd0c6f4735 ("ppc: Do some batching of TCG tlb flushes")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220113180352.1234512-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
POWERPC_MMU_BOOKE is not a mask and should not be tested with a
bitwise AND operator.
It went unnoticed because it only impacts the 601 CPU implementation
for which we don't have a known firmware image.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220124081609.3672341-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
cpu_interrupt_exittb() was introduced by commit 044897ef4a
("target/ppc: Fix system lockups caused by interrupt_request state
corruption") as a way to wrap cpu_interrupt() helper in BQL.
After that, commit 6d38666a89 ("ppc: Ignore the CPU_INTERRUPT_EXITTB
interrupt with KVM") added a condition to skip this interrupt if we're
running with KVM.
Problem is that the change made by the above commit, testing for
!kvm_enabled() at the start of cpu_interrupt_exittb():
static inline void cpu_interrupt_exittb(CPUState *cs)
{
if (!kvm_enabled()) {
return;
}
(... do cpu_interrupt(cs, CPU_INTERRUPT_EXITTB) ...)
is doing the opposite of what it intended to do. This will return
immediately if not kvm_enabled(), i.e. it's a emulated CPU, and if
kvm_enabled() it will proceed to fire CPU_INTERRUPT_EXITTB.
Fix the 'skip KVM' condition so the function is a no-op when
kvm_enabled().
CC: Greg Kurz <groug@kaod.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/809
Fixes: 6d38666a89 ("ppc: Ignore the CPU_INTERRUPT_EXITTB interrupt with KVM")
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20220121160841.9102-1-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Book-E architecture does not set the error code in 31:27 bits
of SRR1, but instead uses these bits for custom fields such
as GS (Guest Supervisor).
Wrongly setting these fields will result in QEMU crashes
when attempting to execute not executable code due to the attempts
to use Guest Supervisor mode.
Cc: "Cédric Le Goater" <clg@kaod.org>
Cc: Daniel Henrique Barboza <danielhb413@gmail.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Greg Kurz <groug@kaod.org>
Cc: qemu-ppc@nongnu.org
Cc: qemu-devel@nongnu.org
Cc: qemu-stable@nongnu.org
Signed-off-by: Vitaly Cheptsov <cheptsov@ispras.ru>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220121093107.15478-1-cheptsov@ispras.ru>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
After a TLB miss exception, GPRs 0-3 must be restored on rfi.
This is managed by hreg_store_msr() which is called by do_rfi()
However, hreg_store_msr() does it if MSR[TGPR] is unset in the
passed MSR value.
The problem is that do_rfi() is given the content of SRR1 as
the value to be set in MSR, but TGPR bit is not part of SRR1
and that bit is used for something else and is sometimes set
to 1, leading to hreg_store_msr() not restoring GPRs.
So, do the same way as for POW bit, force clearing it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Cedric Le Goater <clg@kaod.org>
Cc: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220120103824.239573-1-christophe.leroy@csgroup.eu>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-24-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-23-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When swap regs for hypervisor, the value of vsstatus or mstatus_hs
should have the right XLEN. Otherwise, it will propagate to mstatus.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-22-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When sew <= 32bits, not need to extend scalar reg.
When sew > 32bits, if xlen is less that sew, we should sign extend
the scalar register, except explicitly specified by the spec.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-21-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The mask comes from the pointer masking extension, or the max value
corresponding to XLEN bits.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220120122050.41546-20-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Only check the range that has passed the address translation.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-19-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-18-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-17-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We need not specially process vtype when XLEN changes.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-16-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use cached cur_pmmask and cur_pmbase to infer the
current PM mode.
This may decrease the TCG IR by one when pm_enabled
is true and pm_base_enabled is false.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-15-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Define one common function to compute a canonical address from a register
plus offset. Merge gen_pm_adjust_address into this function.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-14-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Replace the array of pm_mask/pm_base with scalar variables.
Remove the cached array value in DisasContext.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-13-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220120122050.41546-12-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Write mask is representing the bits we care about.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-11-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-10-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-9-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In some cases, we must restore the guest PC to the address of the start of
the TB, such as when the instruction counter hits zero. So extend pc register
according to current xlen for these cases.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-8-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The read from PC for translation is in cpu_get_tb_cpu_state, before translation.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-7-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Current xlen has been used in helper functions and many other places.
The computation of current xlen is not so trivial, so that we should
recompute it as little as possible.
Fortunately, xlen only changes in very seldom cases, such as exception,
misa write, mstatus write, cpu reset, migration load. So that we can only
recompute xlen in this places and cache it into CPURISCVState.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-6-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When pc is written, it is sign-extended to fill the widest supported XLEN.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-5-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-4-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
As pc will be written by the xepc in exception return, just ignore
pc in translation.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-3-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel Henrique Barboza
Peter Maydell
Richard Henderson
David Miller
Nico Boehr
Philippe Mathieu-Daudé
Alexander Graf
Fabiano Rosas
Nicholas Piggin
Gareth Webb
Weiwei Li
Guo Ren
Anup Patel
LIU Zhiwei
Philipp Tomsich
Frédéric Pétrot
Alex Bennée
Víctor Colombo
Cédric Le Goater
Helge Deller
Vitaly Cheptsov
Christophe Leroy